View Bid Results For Network Analyser Tenders

We found 146 Bid Results related to network analyser tenders. You can find Contractor details who won network analyser tenders along with contract details in Bid awards announcements section.

Filters
Stage
131
11
4
Tender Publishing Platform
87
59
State / UT
24
26
16
12
12
12
11
9
9
5
4
4
4
3
3
3
3
2
2
1
1
1
1
1
1
Contract Value
18
21
80
27
Publish Date
0
0
0
0
0
Sector
19
48
41
10
7
6
4
4
4
3
3
3
3
3
2
1
1
1
1
1
Ownership
5
71
44
20
10
1
Within keyword
Active filters:
Showing 1–3 of 146 tenders matching your filters
Contract Date: Ref. Documents Contract Value : 5.25 Lakh
Government Departments No of Bidders 5
4.
Power #11055259 AOC
Tender Document For Sub-Station and Transmission Line [PACKAGE-C8(1B)]-TECHNICALSPECIFICATION FOR 12kV, 800A, 18.4kA, MULTI PANEL (Incoming, Bus Coupler with Adaptor Panel and Outgoing) SHUNT TRIP, INDOOR TYPE SCADA COMPATIBLE SWITCHGEAR WITH MOTOR OPERATED SPRING CLOSING VACUUM CIRCUIT BREAKER- 1 ELECTRICAL PART : 2 WBSETCL Assessed Quantities: 3 245KV 40KA for 3sec Gas Insulated Switchgear - i)2500 A rated Double Bus Barwith BUS earthing arrangement ii) 3 phase / single phase encapsulated iii) Minimum 2000 A rated Circuit Breaker for line and Transformers & 2500A for Bus coupler Bay iv) CT with current ratio 1600-800-400/1A (5 core) for feeder & transformer & 2000-1600/1A (3 core) for bus coupler as per CT specification v) Each feeder comprises of Circuit Breaker, Disconnectors, CTs, Bus bar, density monitors, gas partition etc. vi) suitable for EHV cable entry withdouble terminationarrangementif single Run cable is used other will be kept as spare. vii) Standalone Local Control Cubicle (LCC) with all required accessoriesand Gas monitoring system and the requiredPD sensors to cover the total GIS portion. -The complete system shall be as per technical specification and requirement comprising of - 4 Complete LineBayswith accommodation of3 nos GIS Line VTeach having 3 cores(2 nos core for Protection and 1 no core for metering and other parameters as per technical specification 5 LA for Line bay ( one number per phase - to be installed within GIS) 6 CompleteTransformer Bays 7 Buscoupler Bay 8 2 sets of 3 phase Bus PT each having 3 cores (2 core Protection and 1 core Metering), each for Main Bus-I & Main Bus-II with disconnectors & earth switch. As per Tech Spec 9 Disconnector with earthing arrangement and gas tight barriers atOne side of Main Bus I & IIfor future extension.one side 10 Portable UHF PD monitoring System - The analyser shall have 6 channel input withinherent PD location accuracy of 0.5m., colour display unit and user friendly interface for detailed analysis.The system includes allaccessoriesto monitorPD, UHF cables,required software and other accessories to complete as per Technical Specification. 11 Dew Point Meter as per Technical Specification 12 145KV 31.5KA for 3sec Gas Insulated Switchgear i)2000 A rated Double Bus Barwith BUS earthing arrangement ii) 3 phase / single phase encapsulated iii) Minimum 2000 A rated Circuit Breaker iv) Each feeder comprises of Circuit Breaker, Disconnectors, CTs, Bus bar, density monitors, gas partition etc.v) CT with current ratio 1000-800-400/1A (5 core) for feeder & transformer & 2000-1600/1A (3 core) for bus coupler as per CT specification vi) suitable for EHV cable entry withdouble terminationarrangementif single Run cable is used other will be kept as spare. vii) Standalone Local Control Cubicle (LCC) with all required accessoriesand Gas monitoring system and the requiredPD sensors to cover the total GIS portion. -The complete system shall be as per technical specification and requirement comprising of - 13 Complete LineBayswith accommodation of3 nos GIS Line VTeach having 3 cores(2 nos core for Protection and 1 no core for metering and other parameters as per technical specification 14 Complete Transformer Bays for LV side of 160 MVA 220/132 KV Transformer & HV side of 50 MVA 132/33 KV Transformers 15 Bus coupler Bay 16 Disconnector with earthing arrangement and gas tight barriers atOne side of Main Bus I & IIfor future extension.one side 17 2 sets of 3 phase Bus PT each having 3 cores (2 core Protection and 1 core Metering), each for Main Bus-I & Main Bus-II with disconnectors & earth switch. As per Tech Spec 18 36 KV, 31.5KA for 3sec Indoor, floor mounted drawoutSwitchgear Assembly (2500A Bus rating with Copper Bus Bar) with VCB suitable for EHV cable entry withtripple termination arrangement and bus earthing arrangement from both side, Line earthing arrangement and dead line status and corresponding electrical and mechanicalinterlocking arrangementas per technical specification and requirement comprising of - 19 Outgoing Feeder Bays, 1250A Circuit Breaker ratingas per Techspec. 20 LV side of50MVA 132/33KV Transformer Bays (2000 A Breaker Capacity) CT Ratio 2000-1000/1A 3 coreas per Tech spec 21 HV side of6.3 MVA 33/11KV Transformer Bays(1250 A Breaker Capacity ) as per Tech Spec 22 Station service transformer bay (1250A Circuit Breaker rating) 23 Bus section Bay (2500 A Breaker Capacity) 24 (i)2(two) set of 3 phase Bus PT - 5 limb, (One set each for Main Bus-I & Main Bus-II) with isolation arrangement.as per Tech Spec. (ii) Other required equipment & accessories like Bus Earthing arrangement etc. to complete the system . 25 12 KV, 1600 A, 25 KA, 30 V DC, SCADA compatible, VCB Switchgear includingProtection Relays, ,control & annunciation equipment and other accessories complete as per technical specification (uploaded for Nandanpuronly) Cable and bus earthing shall be electrically and mechanically interlocked with associated breaker as per interlock requirement. but rating should be as per BOQrequirement comprising of - 26 Outgoing Line Bays (CT Ratio 400-200/1) 2 coreVCB rating 1250A 27 Incoming Transformer Bays(CT Ratio 600-400/1A) 4 core VCB rating 1250A 28 Bus section Bay VCB rating 1600A 29 (i) 3(Three) set of 3 phase Bus PTwith isolation arrangement must be mounted above incomer switchgearpanel. (ii) Other required equipment and accessories like Bus earthing arrangement etc to complete the system 30 Electric Overhead Travelling Crane (E.O.T.) 31 Electric Overhead Travelling Crane (E.O.T.)- For 220 KV GIS Building 5.0 Metric Ton capacity or maximum weight of GIS shipping unit whichever is higher -complete with all accessories as per technical specification and requirement. 32 Transformers : 33 160 MVA, 220/132/33 KV, 3 Phase ,Auto Transformer suitablefor NIFPSwith Bushing CTs and NCTS andRTCC panel alonwith BCUand other accessories as per technical specification ofAuto Transformer. 220KV & 132KV bushingshall be of RIP/RIS type. 34 Nitrogen injection type Fire Prevention and ExtinguishingSystem including reservoir tank andall required accessories for 160 MVA, 220/132/33 KV, 3 Phase Power Transformer 35 50 MVA, 132/33 KV, 3 Phase, 2 winding Power Transformerwith Bushing CTs and NCTsincluding RTCC panel alongwith BCU and alongwith all accessoriesin line with technical specification of Power Transformer.132 KVbushingshall be of RIP/RIS type. 36 6.3 MVA, 33/11 KV, 3 Phase, 2 winding Power Transformer with Bushing CTs and NCTs in line with technical specification of Power Transformer . As per Tech spec 37 STATION SERVICE TRANSFORMER: 315 KVA, 33/0.415 KV, 3Ph, 2-Windingas per technical specification andrequirement 38 EARTHINGTRANSFORMER: 33KV, 3 Ph ,fault current rating of874 Amp for 30 secas per Technical Specification and requirement 39 Isolators : As per Technical specification 40 220 KV, 1600A, 40 KA for 3sec, HCB, motor operated 3-phase Assembly WITHOUT EARTHING SWITCH (excluding insulators) for HV side of 160 MVA Transformers(water proof mechanism housing with auxiliary switch) 41 Solid Core Insulator for each set of above Isolators 42 220 KV, 1600A, 40 KA for 3sec, HCB, motor operated 3-phase Assembly WITH EARTHING SWITCH (excluding insulators) for Line bay(water proof mechanism housing with auxiliary switch) 43 Solid Core Insulator for each set of above Isolators 44 132KV, 1250 A,31.5 KA for 3sec, HCB, 3Ph Assembly isolator with Earth Switch for line feeder, motor control - excluding solid core insulators as per Tech. Specification (water proof mechanism housing with auxiliary switch) 45 Solid coreInsulator for each set of above Isolators 46 132KV, 1250A,31.5 KA for 3sec, HCB, 3Ph Assembly isolator with out Earth Switch for Transformers, motor control - excluding solid core insulators as per Tech. Specification (water proof mechanism housing with auxiliary switch) 47 Solid coreInsulator for each set of above Isolators 48 33KV, 1250A,31.5 KA for 3sec, CRDB, 3Ph Assemblywithout earthswitch as per Tech. Specification - forHV side of 33/11KV Transformer & Earthing Transformer(excludingInsulators ) 49 Solid coreInsulator for each set of above Isolators 50 33KV, 2000 A,31.5 KA for 3sec, CRDB, 3Ph Assemblywithout earthswitch as per Tech. Specification - for LV side of 132/33 KV Transformer,(excludingInsulators ) 51 Solid coreInsulator for each set of above Isolators 52 33KV, 1250A,31.5 KA for 3sec, CRDB, 3Ph Assembly with Horn-gap fuse units to be mounted on same structure of isolator ( for Station service Transformers ) as per Tech. Specification(excluding insulator) 53 Solid Core Insulator for each set of above Isolators 54 LIGHTNINGARRESTORAs per Technical specification 55 198 KV, single phase, 10 KA, Heavy Duty, Station Class, Gapless (for 2 nos. 160 MVA Transformersas per technical specification and as per requirement. (Polymer type) 56 198 KV class polymer type LA at Composite Tower 57 120 KV, Single phase, 10 KA, Heavy Duty, Station Class, Gapless for 2 nos 160MVA Transformers,2 nos 50MVA Transformerand line bays (Polymer type) 58 42 KV, Single phase, 10 KA, Heavy Duty, Station Class, Gapless (for 2 nos 50MVA transformer, 3 Nos 6.3 MVA 33/11 KV Transformer &2 nos.315KVA station serviceTransformer) ((Polymer type) 59 12 KV, 3 phase 10KA,Station class GapelessLA (LV side of 3nos. 6.3MVA Transformers) (Polymer type) 60 220 V Battery & Charger( As per technical Specification ) 61 VRLA Battery SET - 800AH 220 Voltas per Tech Spec. 62 Battery Health monitoring system forabovementioned 220V batteries as per Technical Specification. 63 Battery Charger - 220Volt. suitable for above Battery set in line with Technical Specification(Float Charger capacity - 80A and Float cum Boost Charger capacity - 150A) - Charger shall be equipped with disconnecting arrangement forLoad and Battery - Charger shall be capable of charging the battery both in Constant Current and Constant Voltage mode with appropriate selector switch - Fuse fail indication arrangements are to be provided for all fuse units. All the indications like fuse fail, blocking diode fail, rect. fail, battery earth fault, charger fail etc are to be provided locally, as well as necessary potential free contacts to send at remote end also. 64 VRLA BATTERY SET -75 AH 30 VoltCapacity will be as per design or75 AH whichever is higher as per uploadedtech spec 65 Battery Charger - 30Volt. Foalt cum Boost Charger Float charger capacity 35A or as per design whichever is higher as per Tech Spec ( uploaded) - Charger shall be equipped with disconnecting arrangement forLoad and Battery - Charger shall be capable of charging the battery both in Constant Current and Constant Voltage mode with appropriate selector switch - Fuse fail indication arrangements are to be provided for all fuse units. All the indications like fuse fail, blocking diode fail, rect. fail, battery earth fault, charger fail etc are to be provided locally, as well as necessary potential free contacts to send at remote end also.(as per uploaded spec.) as per uploaded spec 66 PROTECTION PANEL ( SIMPLEX REAR Open Door type ) inclusive of all relays, Annunciator (Minimum 24 windows or more as per scheme requirement, with RS485 port for Modbus Communication, Auxiliary AC and DC Supply as well as Dedicated AC Fail and DC Fail windows) at each panel and other accessories as per specificaction and requirement. (Protection Panels will be installed in Relay Room.) 67 Protection panel with BCU and Breaker Control Switch for 220 KV Line Feeder. Each feeder panel will have 2 nos. Distance Protection Relays of different manufacturer having different model, algorithm, hardware with Group Selection Switch and all other accessories complete as per Tech. Spec. 68 Protection Panel with BCU and Breaker Control Switch for 220 KV side of 220/132/33 KV Transformer complete as per Tech. Spec. (Transformer Differential Relay, Circulating Curent Protection Relay in addition to all other Transformer HV Protection relays are to be considered in HV side Panel). 69 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both Bus PTs) and Breaker Control Switch for 220 KV Bus Coupler complete as per Tech. Spec. 70 220 KV Busbar Differential Panel with low impedance type Centralized Busbar Protection Relay having in-built LBB protection, End Fault protection, CT Open detection feature etc. complete as per Tech. Spec. (Panel to be complete with all relays, components and wiring i.r.o. at least 3 nos. future Line bays and 1 no. future Transformer HV bay in addition to present bays) 71 Protection panel with BCU and Breaker Control Switch for 132 KV Line Feeder. Each feeder panel will have 2 nos. Distance Protection Relays of different manufacturer having different model, algorithm, hardware with Group Selection Switch and all other accessories complete as per Tech. Spec. 72 Protection Panel with BCU and Breaker Control Switch for 132 KV side of 220/132/33 KV Transformer complete as per Tech. Spec. 73 Protection Panel with BCU and Breaker Control Switch for 132 KV side of 132/33 KV Transformer complete as per Tech. Spec. (Transformer Differential Relay, HV REF Protection Relay in addition to other Transformer HV Protection relays are to be considered in HV side Panel) 74 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both Bus PTs) and Breaker Control Switch for 132 KV Bus Coupler complete as per Tech. Spec. 75 132 KV Busbar Differential Panel with low impedance type Centralized Busbar Protection Relay having in-built LBB protection, End Fault protection, CT Open Detection feature etc. complete as per Tech. Spec. (Panel to be complete with all relays, components and wiring i.r.o. at least 3 nos. future Line bays and 1 no. future Transformer HV bay in addition to present bays) 76 Protection Panel with BCU and Breaker Control Switch for 33 KV Line Feeder as per Tech. Spec. 77 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 33/0.415 KV Station Service Transformer (S.S.T.) as per Tech. Spec. Panel schematics will be similar to Line Feeder Panel, along with addtitional S.S.T. Supervision Relays. 78 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 132/33 KV Transformer as per Tech. Spec. 79 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 33/11 KV Transformer (considering HV REF Protection Relay, HV Over-current Relay and all other accessories alongwith space and provision for future Transformer Differential Relay) as per Tech. Spec. and actual requirement. 80 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both side Bus PTs) and Breaker Control Switch for 33 KV Bus Section bay as per Tech. Spec. 81 Meter Panel without meter( As per drawing uploaded) 82 XLPE Copper Cableas per Technical Specification 83 220 KV 630 Sq. mm single Core Copper Cable AL sheath forLine from Composite Tower To GIS- Single phase connection with double run cable for each phase- The actual length will be decided after finalisation of LUP drawing. 84 220 KV 630 Sq. mm single Core Copper Cable AL Sheath for HV side of 160 MVA TransformersSingle phase connection with single run cable for each phase- The actual length will be decided after finalisation of LUP drawing. 85 220 KV 400 Sq. mm Single Core Cu cable AL sheath(as per technical specification and as per requirement) forLine bays- Single phase connection with single run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 86 132 KV 630 Sq. mmsingle core Cu cable AL sheath (as per technical specification and as per requirement) for connection of 132 KV side of 2 nos 160 MVA, 220/132/33 KV Transformers - Single phase connection with doublerun cable for each phase - The actual length will be decided after finalisation of LUP drawing. 87 132 KV 400 Sq. mm Single Core Cu cable AL sheath(as per technical specification and as per requirement) for connection of 132 KV side of 2 nos 50MVA, 132/33 KV Transformers and Line bays- Single phase connection with single run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 88 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer - Single phase connection with double run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 89 33 KV 240 Sq.mmThree Core copper cable for three 33/11KV 6.3MVA Transformer , two 315KVA Transformer - Three Phase Connection with single run cable - The actual length will be decided after finalisation of LUP drawing. 90 11 KV 400 Sq.mm 3 coreCopper for 33/11KV 6.3MVA Transformer - Three Phase Connection with singlerun cable - The actual length will be decided after finalisation of LUP drawing. 91 Outdoor End Termination Kit/ cable sealing end and other required accessories for above XLPE cables as per requirement and specification : 92 For 220KV 630 Sq.mmsingle core copper cable for Line 93 For 220KV 630 Sq.mmsingle core copper cable forTransformer 94 For 220KV 400 Sq.mmsingle core copper cable for Line 95 132 KV 630 Sq.mm single Core Copper Cable for LV side of 160 MVA Transformer (single phase connection with doublerun cable for each phase ) 96 132 KV 400 Sq.mm single Core Copper Cable forHV side of 50 MVA Transformer & Line feeder(single phase connection with single run cable for each phase ) 97 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer (single phase connection with two run cable for each phase) 98 33 KV 240 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer, two 315 KVA Auxiliary Transformer,( Three phase connection with single run cable ) 99 11 KV 400 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer(Three Phase Connection Single run cable) 100 Indoor End Termination Kit for above XLPEcable : Dry Plug-In type GIS Indoor Termination kitwith all its accessories complete. This includes cable connecting contact plates and cable terminal box at GIS termination of type-A, Fig -3 as per IEC 60859 with support structure and insulator as per approved drawing, technical specification /requirement as per the following cables. For 33 : Dry Heat Shrink type as per approved drawing, technical specification /requirement as per the following cables. 101 For 220KV 630 Sq.mmsingle core copper cable for Line 102 For 220KV 630 Sq.mmsingle core copper cable forTransformer 103 For 220KV 400 Sq.mmsingle core copper cable for Line 104 132 KV 630 Sq.mm single Core Copper Cable for LV side of 160 MVA Transformer (single phase connection with doublerun cable for each phase ) 105 132 KV 400 Sq.mm single Core Copper Cable forHV side of 50 MVA Transformer & Line feeder(single phase connection with single run cable for each phase ) 106 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer (single phase connection with two run cable for each phase) 107 33 KV 240 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer, two 315 KVA Auxiliary Transformer,( Three phase connection with single run cable ) 108 11 KV 400 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer(Three Phase Connection Single run cable) 109 Generator 110 DG set 100KVA with all accessoriesas per Technical specification 111 Communication Equipment (As per technical specification, BOQ and mentioned Annexure) 112 Fibre Optic Terminal equipment ( with minimum five redundantdirections with MSP protection)/Optical Line Terminal Equipment (SDH-STM 4) for the Sub Station Reduntant Power Supply card and Control card etc. complete to meet Tech. Spec. Requirement in all respect ( should be compatible with FO equipment at BAPL,SLDC & Backup SLDC for data and voice communication and carrier aided protection). 113 E1 Interface cards( Minimum 16 interfaces/card) 114 Ethernet Interfaces10/100 Mbps with Layer-2 switching ( Minimum 8 interfaces/card) 115 Equipment Cabinets 116 Main Distribution Frame (100 pairs) 117 Pre-connectorised optical fibre patch cords as per requirement 118 E-1 Port Interfacing Cable 119 EPAX (with cabinet)To be suitable both for FO Equipment and PLCC equipment with 2 digit, 3 digit & 4 digit Station numbering facility and programmable features such as using analog telephone & Laptop with (4 x 8 nos.) Local Subscribers 120 Digital Teleprotection Coupler suitable for integration with SDH terminal equipment to communicate on G 703 (E1, 2 Mbps) with minimum eight commands as per Technical Specification requirement. 121 Telephone Receiver (2-wire) for connection with EPAX,to be installed at different rooms of GIS cum Control& office building, C-type quarter, Colony buildings, Security room at main gate and other areas as per direction of Site-In-Charge. 122 Telephone cable (armoured) for all2-wire telephones & other requirements as per specification and as per requirement 123 STP Data Cable(CAT 6) with flexible GI conduit pipe for data transfer and for connecting IP phones (placed at Control room, communication room, Sub-Station In-charges room etc.) with FO Panel 124 Two no. licensed software for configuration of SDH and DPC to be handed over in two pendrive to Communication wing 125 48V, 300AH VRLA type Battery 126 48V, 60A Battery Charger 127 48V DCDB as per technical specification 128 Integration withexisting Fiber Optic System at connecting Sub-Stationon optical channel (STM-4), in consultation with the OEM, whose equipment is installed at other end. i) for voice & data communication ii)for carrier aided protection purpose -with supply of equipment and material(SFP,Patchcord, etc) as required. Intigration of new SDH, with existing SDH at connecting substation must not affect repoting of existing SDH at NMS, for which necessay action needs to be taken. 129 SAS system (as perindicative Scheme diagram, Technical Specification and requirement) -Monitoring & Control of the Sub Station from a far end Operting Station in addition to local unit 130 Rack mounted Main Server (Intel XeonSilver 4215processor or higher) with KVM console with display & all accessories ( server is to be mounted at SERVER PANEL-1, for connection FO port to be considered). 131 Rack mountedStandbyServer (Intel Xeon Silver 4215 processor or higher) with KVM console with display & all accessories ( server is to be mounted at SERVER PANEL-2, for connection FO port to be considered). 132 Local HMI (client Terminal) with 32 Monitor (LED) 133 Remote HMI PC with monitor (32LED) and necessary software for remote control and monitoring via local substation Gateway ,shall support IEC60870-5-104and IEC 61850 protocol. Remote HMI shall 100% replication of local substation HMI in all respect . 134 MainGateway (Intel Xeon Silver 4215 processor or higher)-Bay level data shall report to GATEWAY & SERVER independently. support simultaneous communication with 4 independent Master stations over IEC 104 protocol. 135 Standby Gateway (Intel Xeon Silver 4215 processor or higher)- Bay level data shall report to GATEWAY & SERVER independently. support simultaneous communication with 4 independent Master stations over IEC 104 protocol 136 Disturbance Recorder Cum Engineering Workstation PC (Industrial Grade) withMonitors (24 size- LED) 137 1 no PC with monitor (24 size LED) and necessary software for remote end to fetch DR data from relays and to configure all relays . 138 Rack mounted complete GPS unit, to be mounted in server panels . 139 Laser Colour Printer (suitable for at least A3 size) 140 Dot Matrix Printer 141 PRP Compliant, managed 20 FO port Ethernet Switch, industrial grade. 142 SAS application software with required license (suitable for 8000 signals, with life time validity) and other relevant operating & system software for running the scheme successfully. 143 Redundant Inverter of 5KVA or higher capacity in HOT-STANDBY Mode, on220V station battery , to feed SERVER, GATEWAY, HMI, Engineers WorkStation,Monitors, Ethernet Switches, KVM Switches,Printers, MODEM/ROUTER, etc. 144 Cabling System -Multimode / Single Mode Dual Window armoured fibre optic approach cable as required with HDPE duct, Flexible GI Conduit, all other power & control cables, Jacks, connectors and any other hardware to meet functional / performance requirement. 145 LIU having minimum 12 ports. 146 Red Box having minimum 4 RJ45 & 2 FO ports. 147 Remote Monitoring & control (wherever required) of Station Auxilliary System like Fire Fighting System, Air Conditioning System, Battery System, Lighting System, ACDB, 220V & 48V DCDB,replica of annunciator with buzzer & reset arrangement,& fire fighting annunciatoretc. complete as per technical specification requirement. For auxilliary system, AUX BCU to be mounted in separate panel. 148 Premium quality Integrated Control console deskwith chairs and other furnituresfor HMI Workstations, DR PC, telephones, storing of log sheets & manuals etc. suitable for three operators 149 Data Integration with SLDC and Back up SLDC End Including programme as per technical specification and also as per site requirement by directly communication with agency engaged for AMC of SCADA at SLDC and Back up SLDC End. 150 Router cum firewall shall be provided at local end for remote data transmission . 151 Network panel and other material / equipment / accessories required for successful completion ofthe job . 152 Automated notification in the form of SMS - i) SMS is required to be sent to 5 (five) mobile numbers at a time. ii) When required, any number can be deleted or altered. For that easy interface is to be provided. A log (with user-id and time) for the same is also required to be maintained. iii) The type of disturbaces or trippings for which SMS to be sent must be cofigurable. iv) All required hardwares and softwares to establish the system is under scope of the bidder. v) ISP connection in the name of WBSETCL and any formalities (if required) is to be done by the Bidder.SIM will be provided by WBSETCL. vi) After handing over the system, any recurring charges for SIM will be borne by WBSETCL. 153 Vendor Assessed Quantities: 154 ACDISTRIBUTION BOARD(comprising of Main ACDB, Sub-ACDBMLDB,DB) complete as per technical specificationand as per requirement. In addition to incomers from 2 nosStation Transformer, and Diesel Generator, suitable incomer for Solar Roof Top plant (40 kWp capacity) is to be considered as per requirement for GIS building and 11 KV room . 155 DCDISTRIBUTION BOARD (220 V DC)complete as per technical specificationand as per requirement 156 30V DCDB (with single source) for 11 KV System as per uploaded Tech spec 157 Control cable 1.1KV grade( Cupper ) as per TECH Spec and as per requirement as per approved drawing and cable schedulefor entire work including cable laying fromACDB & DCDB ,paneland any other equipment and also any equipments supplied by WBSETCL including Supply and installation of all required cables as per transformer & RTCC scheme drawing . Actual quantity will be finalised as per approved drawing and cable schedule and as per requirement 158 19 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 159 16 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 160 12 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 161 8 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 162 4 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 163 5 core, PVC, Armoured4 Sq. mm Copper as per Technical Specification.(For all CT, PT & CVT connection. For CT individual colour coded cables are to be used for individual core). 164 4 core, PVC, Armoured4 Sq. mm Copper as per Technical Specification. 165 5 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 166 3 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 167 2 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 168 POWERCABLE-Multi Core, PVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification and as per requirement as per approved drawing and cable schedulefor entire work including cable laying fromACDB & DCDB ,paneland any other equipment and also any equipments supplied by WBSETCL including Supply and installation of all required cables as per transformer & RTCC scheme drawing (Allcablesshall be of Copper only.)Actual quantity will be finalised as per approved drawing and cable schedule and as per requirement 169 1C X 500 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 170 3.5C X 185 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 171 4C X 16 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 172 4C X 25 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 173 4C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 174 4C X 35 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 175 2C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 176 1C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 177 2C X 4 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 178 ACSR CONDUCTORwith accessoriesas per Technical Specification and as per requirement 179 ACSR Moose 180 ACSR Panther 181 Earth /Shield wirefor LM down comer 182 ALUMINIUM TUBULAR PIPE (Schedule 80) as per Technical Specification and as per requirement 183 3 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 184 2.5 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 185 1.5 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 186 CLAMPS,CONNECTORS,BUNDLE SPACER, Hardware fittings & accessoriesincluding equipment connectors(SUITABLE FOR SCH. 80) and as per approved ACSR conductor as per Technical Specification and as per requirement 187 220KV System 188 132KV System 189 33 KV System 190 11KV System 191 0.4KV System 192 Solid Core POSTINSULATOR& Anti fog type Disc insulatorwithhardware fittings and accessories as per Technical Specification andrequirement 193 220KV System 194 132KV System 195 33 KV System 196 11KV System 197 ILLUMINATION SYSTEM 198 ILLUMINATION SYSTEM COMPLETE (Both Indoor & outdoor)GIS building control building switchyard periphery C type building B type buildingPump House, Security Goomty / Barrack, DG Room,other area installation including light pole with foundation worketc as per technical specificationandrequirement. Allluminaire used shall be of LED type (irrespective of the type mention in specification) and all fans shall be of energy efficient BLDC type. 199 Dehumidifier as per specification 200 Dehumidifier with suitable capacity & size for 33 KV Switchgear Roomas per approved drawing 201 Direct Stroke Lightning Protection for GIS building(considering Roof Top Solar Plant), Control builting, FFPH, as per relevant IEC. 202 Furnitures and Gadgets for Conference Room - Premium quality furnitures of reputed brand like Godrej or equivalent are to be considered. However, before procurment of furnitures and gadgets, written approval from WBSETCL site-in-charge is to be taken. 203 Conference table suitable for 30 person 204 Executive High Back chairs 205 Digital Audio / visual projector - 4K resolution, 2 nos USB 2.0 and 2 nos HDMI 2.0 ports (Preferred make - Sony, Epson, JVC, Panasonic) 206 64 or higher Interactive smart whiteboard of reknowned make 207 Meeting room Audio system (microphones - 30 nos., wall mounted speakers, amplifiers, other required hardwares & softwares) - (Make Harman, Sennheiser or equivalent) 208 Decorative dimmable LED lights (average 500 lux level) 209 High quality window blinds matching with room interior 210 AIR CONDITIONING SYSTEM COMPLETE as per Technical Specification and as per requirement (All machines must be of same make.) 211 RelayRoom and SAS Room & communication Room- Ductable Air Conditioning System is to be considered. -All machines must be ofsame make . Considering continuous operation ,machines must be of Industrial gradeand refrigerent must be of R32 or better environmental standards .as per spec 212 5star rated Split type Non-Ductable AC for Battery & Chargerroom, In-Charge Room, Conference room DB Room etcAll machines must be ofsame make . Considering continuous operation, machines must be of Industrial grade / 5 star rated split and refrigerent must be of R32 or better environmental standards as per spec 213 FIRE FIGHTING & FIRE PROTECTION SYSTEM - As per Tech spec 214 Fire hydrant system in ring formation along the periphery of switchyard covering entire portion (Entire 132 KV Switchyard &220 KV switchyard), GIS building, Control Building etc as required. 215 Portable fire extinguisher & bucket at key locations of switchyard ,control room, GIS building, office area ,residential and other building and near each Power Transformer as per Technical spec . and as per requirement. 216 Fire Alarm System (Concealed cabling is preferred ) - i) Smoke & heat detection system covering all the rooms of GIS cum Control room building ii) adequatebeam detector with redundancyfor GIS room - as per technical specification & requirement 217 CCTV Survelliance system (as perTech specification ) - The system shall be capable to integrate with central control centre. The actual quantity shall be finalised depending on the approved design . 218 Fixed Bullet camera (short range) with all accessories -as per technical specification. 219 Fixed Bullet camera (long range) with all accessories -as per technical specification. 220 Fixed Dome camera with all accessories-as per technical specification. 221 PTZ camera with all accessories-as per technical specification. 222 IP Based Outdoor Thermal Camera with all accessories as per technical specification 223 VMS management server with 30 days recording facility for minimum 40 cameras (with MS Windows professional operating system) -as per technical specification. 224 Video surveillance software and license for 40 cameras or more (which shall be valid for lifetime) -as per technical specification. 225 40 4K Display, 24 x 7 operation; as per technical specifications 226 2 KVA online UPS with 30 minute backup-as per technical specification. 227 24 Port PoE 1G Network Switch with 4 nos SFP Ports along with 1G SM SFP Modules; as per technical specifications 228 Required number of Industrial Grade 4 Port 1G Network Switch with 2 Nos. SFP Ports along with 1G SM SFP Modules; as per technical specifications 229 Media Converter, PTZ keyboard with joystick, cabinet, junction box, POE injector, LIU, power supply, Indoor floor mount rack, outdoor rack, clamp, connector and hardware for camera fixing etc. -as per technical specification. 230 All types of armoured fibre optic cables, CAT 6 cables, armoured copper cables, HDMI cable, HDPE conduits, PVC straight pipe and accessories etc. required to complete the system-as per technical specification. 231 Computer Table, rolling Chair, additional mounting pole and Other tit-bit materials not specified above but required for successful completion of CCTV surveillance systemas per site requirement. 232 NEXT GENERATION FIREWALL/ CYBERSECURITY GATEWAY and all required hardwares & software for integration with remote Control Command & Centre AS PER TECHNICAL SPECIFICATIONS. 233 One additional viewing unitsat In-Charge Room with all required hardware and software 234 SUBSTATION EARTHING SYSTEM : As per Technical specification 235 32mm dia or higherMS rod for main earthmat grid,corner mesh and periphry for outdoor switchyard . The actual quantity shall be finalised depending on the approved design (Only design quantity with lap length without any wastage for main mat, periphry& corner mesh will be considered for payment.) The Earthmat design is to be done considering earth resistivity of 30 Ohm-m oractual measured value whichever is higher. 236 32mm dia or higherMS rod for riser below and aboveground auxiliary Mat fencing and gate earthing bending length and overlapping length as per requirement & as per approved drawing 237 GS flat for riser above ground / cable trench & other areas.Rod/pipe electrode , test link and other materials etc. - as per requirement, technical specificationand approved design/layout including earthpit. 238 Earthing for GIS enclosure and GIS building as per manufacturers recommendation including civil work. 239 Earth Link Box, SVL, Earth Strip, earth continuity cable for single bondwherever required for Earthing of allXLPE Cablecomplete at cable conductor junction point etc as per technical requirement / as per approved drawings. 240 Earth Strip and other accessories including lugs for link box etc wherever required for Earthing of allXLPE Cablecompletei as per technical requirement / as per approved drawings. 241 3 ph Earth Link Box with SVLas per technical requirement / as per approved drawings. 242 3 ph Earth Link Box with outSVL as per technical requirement / as per approved drawings. 243 1 ph Earth Link Box with SVL as per technical requirement / as per approved drawings. 244 1 ph Earth Link Box with outSVL as per technical requirement / as per approved drawings. 245 6.6 KV/3.8 KV Copper Bonding Cableas per technical requirement / as per approved drawings. 246 1.1KV Grade 240 sqmm CopperEarth continuity Cableas per technical requirement / as per approved drawings. 247 GRID CONNECTED ROOF TOP SOLAR POWER SYSTEM (As per Technical Specification) 248 5kWpSolar Roof Top plant (at the roof of GIS & Control building) having high quality mono. crystalline type solar PV module from reputed brand (as mentioned under WBSETCL Makers list), Mounting structures (Fixed Type) with Civil pedestals including civil work as per requirement. 249 i) High quality inverter from reputed brand as mentioned under WBSETCL Makers list) suitable for 40kWp solar roof top plant. ii ) All other required accessories- Data logger with CPU, LCD monitor, UPS,Metering,Junction box & distribution boxes, Type-II Surge protective device, string monitoring uints, pyrano.meter with sensors, all Cables, hardware, earthing & lightning protection materials, required furnitures & cabinets, conduits etc. to complete the system of 40kWp grid connected plant 250 Essential spares necessary for operation, routine maintenance and testing of equipment supplied for 3 years to be covered under Annual Maintenance Contract. 251 MISCELLANEOUS ITEMS -As per Technical specification 252 i) Glow signboard for name of the substation- minimum size 50 sq ft, ii) schematic SLD on glow signboard iii) Danger plate, phase plate, bay nameplate etc iv) Statutory caution boards made of mild steel of 250 mm x 200 mm and at least 2 mm thick and vitreous enamelled, white on both sides and with inscription in signal red colour on front side as required. v) Shock treatment chart in local and English language duly mounted on wooden frame with glass as required vi) Safety Slogans - to be put up in Offices and Sub-station premises (Site-in-charge may select the slogans from WBSETCL Safety Manual, Version 2.0, Page 18)vii) WBSETCLLOGO & Sub-Station Nameat main gate of Sub-Station entry with good quality durable materials 253 Ferrules & lugs, GI conduit, Cu flexible wires for panel earthing etc. 254 .Angle, Channel and other hardwares for installation of panels, DBs etc. 255 Supply of itemsfabrication marker, tags,Protection cover tiles, PVC warning tape, route marker, jointing marker, clamps connector etc as per specification & approved drawing 256 Trefoil clamp suitable for approved XLPE cable 257 Bay marshalling kiosk, dummypanel, junction box, , Lighting & other Distribution Boards etc. As per requirement& as per Technical specification 258 Bay marshalling kiosk, 259 Dummypanel, 260 Junction box, (CT,PT,CVT as per requirement 261 Distribution Boards as per requirement 262 Cable Tray (Ladder type & perforated type etc ) as per requirement for indoor cable trench and and as per requirement within GIS building 263 Industrial type Exhaust Fans and mechanised louvers of required quantity for 220KV & 132KV GIS Hall, 33 KV indoor switchgear& 11 KV Switchgear Room as per requirement & as per Tech Spec 264 HDPE Pipes 265 200 mm Dia 266 150 mm Dia 267 One storage type RO + UV + UF water purifier for office building 268 Spares:- Spare relays including test jack are to be delivered after duly tested at CTD WBSETCL on chargeble basis. All materias will be as per scheme of this project ) 269 Distance Protection relay (as approved at 220 KV Line bay for Main-1 potection) 270 Distance Protection relay (as approved at 220 KV Line bay for Main-2 potection) 271 Distance Protection relay (as approved at 132 KV Line bay for Main-1 potection) 272 Distance Protection relay (as approved at 132 KV Line bay for Main-2 potection) 273 Transformer differential Relay(same as approved for 220 KV Transformer bay) 274 Transformer differential Relay(same as approved for 132 KV Transformer bay) 275 BCU (same as approved for 220KV bays ) 276 BCU (same as approved for 132KV bays ) 277 BCU (same as approved for 33KV bays ) 278 BCU (same as approved for auxilliary system) 279 PRP Compliant, managed Ethernet Switch, industrial grade. (same as approved for SCADA Systeml) 280 Over Current& Earth fault Relay 281 Bus Bar Differential Relay (One Central Unit and one Peripheral Unit) 282 Trip Relay 283 VT selection Relay 284 Spares: Spare are to be delivered at nearest store in consultation with in charge All materias will be as per scheme of this project. 285 220KV GIS Circuit Breaker complete mechanism 286 220KV GIS Disconnector complete mechanism 287 220KV GIS High speed earth switch complete mechanism 288 132KV GIS Circuit Breaker complete mechanism 289 132KV GIS Disconnector complete mechanism 290 132KV GIS High speed earth switch complete mechanism 291 33KV CT - same as supplied for Line bay 292 33KV CT - same as supplied for 50 MVA Transformer bay 293 Safety Equipment 294 Full Body Safety Harness with Twin rope lanyard, length < 3 meter with waist belt and accessories as per IS - 3521 295 First aid box complete with all items (as perAnnexure in line with WBSETCL Safety Manual, Version 2.0) - to be placed at Control Room & Maintenance Room 296 Discharge cum earthing rod - Highly insulated FRP telescopic type with all accessories suitable for 245 KV system or higher,CPRI type tested as per IEC - 1230:1993 & IEC - 1235 with tested epoxy earthing rod for 10 KV /ft for 1 min as per IEC- 855 297 Safety Helmet - Made of Polyethylene/ glass fibre reinforced with head band, cradle, strap fittings with withstanding temp of 50oC as per IS – 2925 (Suitable stand / Racks are to be provided to store the helmets. Helmets are to be colour coded for visitors, technical staff and others) 298 Gum Boot made of Rubber (Suitable stand / Racks are to be provided for storage.) 299 Renowned make High Voltage Detector - Suitable for 11 KV to 245 KV , 50 HZ system with sensing level 1 mtr. for 132/220/ 400 KV system complete with HV probe, 5.0 mtr telescopic insulation stick with visual LED and Buzzer indication as per IS - 13771/ IS - 2071 300 Safety shoes - Double density PU sole, leather with hard Toe cap, Non-woven Eva lining, anti static /electric shock proof Insole (with minimum electrical resistance and high voltage of 18 KV), conforming to IS – 15298 301 Hand Gloves - Made of soft quality rubber, seamless latex, shock proof, for electrical purpose suitable upto33 KV -system as per IS - 4770 302 Electric Arc Protection Suit - FR suit compatible to wearwith hood, jacket, face shield, trouser etc complaint with NEFA- 70 E standard as per IEC - 61482-1-1-2007/9 303 Insulating mat - High density insulating matsasper IS - 15652 with ac(rms) kv 3.3, sizes of rolls 5000 mm X 1000 mm (to cover entire operating length of 33KV switchgear, DB room & Panel room) 304 Safety Ladder - Single step self supporting type with complete Fiber glass, 3 inch wide, antiskid fibre steps, non - slip fibre glass shoes with thick rubber pad, Height 8 ft 305 Safety Torch / Search Light - Body:- Fibre glass, PCB - glass epoxy to meet all weather condition, Circuitry - IC Control, Charge -220 Volt AC, Light Source - 12 V Halogen Bulb, 55 watt, Power source - 12 volt, 7 AH sealed battery, Extra jack tobe provided for direct lightning by 12 volt DC, Continuous run - 2 hr High beam Rechargeable Hand Held Search light 306 Lifting Rope - Hemp Rope / Sisal Rope / Manila Rope - One inch dia., 30mtr long 307 Passenger Elevator (6 person capacity, ) - For GIS & Control buildingcomplete in all respect as per technical specification and as per requirement. 308 Industrial grade Vacuum Cleaner of reputed make 309 Civil Part: 310 Supply, fabrication, galvanisaton of variousswitchyard & equipment structures,LM-Lattice type ( 35Mtr or 50 Mtr-based on DSLP Calculation), XLPE cable supporting structure completeas per approved electrical layoutdrawings and technical specification (Electrical & civil) and as per requirement complete. (including Nuts & Bolts and foundation bolts) 311 Switchyard Structures including Nuts & Bolts 312 Foundation Bolts for switchyard structures including nuts, washers and anchor plates (Foundation Bolts shall be galvanisedupto threaded length from top) 313 Supply, fabrication of various structures (MS FLAT, MS Plate, Insert plate, Angles, Transformer Rail, Channels, ISMB, Chequred plate, MS grating for GIS Building, Transformer, Cable trench , drain etc. as per approved drawings, technical specification (Electrical & civil) andrequirement complete.
Contract Date: May 11, 2026 Contract Value : 242.30 Crore
Government Departments No of Bidders 3
West Bengal View Result →
5.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
6.
Educational and Research Institute #10524394 Price Bid
Supply And Installation Of Equipments , Tools , Instruments , Machineries Etc For Itahar Govt Polytechnic-2 Digital Logic Trainer Board ( In Build Bread Boards Provision ) 3 Ic 4 7 Segment Led Display 5 Resistance 6 Led 7 Jumper Wire 8 Jumper Wire Cutter 9 Twizzer 10 Magnifying Glass 11 Function Generator 12 Diode Trainer Kit 13 Transistor Trainer Kit 14 Operational Amplifier Trainer Kit 15 Electronic Trainer Board ( In Build Bread Boards Provision ) 16 555 Timer In Astable, Monostable Operation 17 Discrete Components Resister 18 Digital Multimeter 19 Discrete Components Capacitors 20 Dual Channel Cro 30Mhz 21 8086 Trainer Kit 22 8086 Simulation Software 23 Unmanaged Switch 24 Hub 25 Cat 5E / 6 Cable 26 Rj 45 Connectors 27 Rj 45 Crimping Tools 28 Network Lan Cable Tester ( Rj 45 ) 29 Access Point ( Wifi Router / Wireless Router ) 30 Software 31 Software 32 Software 33 Software 34 Software 35 Software 36 Software 37 Software 38 Software 39 Software 40 Software 41 Software 42 Software 43 Software 44 Software 45 Software 46 50 Mhz Dual Channel Cro. 47 Function Generator 48 Digital Multimeter 49 50 Mhz Dual Trace Cro 50 Variable Dc Power Supply 51 Diode Trainer Kit 52 To Study The Rectifier With And Without Capacitor Filter For : — N ( A ) Half-Wave Rectifier, N ( B ) Full-Wave Rectifier, N ( C ) Bridge Rectifier N N 53 To Study The Output Waveform Of Push-Pull Amplifier For Class-A, Class-B & Class-Ab Operations 54 To Study The Fet Characteristics Trainer 55 To Determine Frequency Response Characteristics Of Rc Coupled Amplifier Circuit And Calculation Of Nbandwidth, Midband Gain, Input Impedance And Output Impedance For : N ( A ) Single-Stage Amplifier N ( B ) Double-Stage Amplifier N 56 Fet Characteristic Trainer Kit 57 Mosfet Characteristics Trainer Kit 58 Shunt And Series Regulator Trainer Kit For Following Plots: Line Regulation And Load Regulation 59 To Study The V-I Characteristics Of Ujt Trainer Kit. 60 To Study The Input And Output Characteristics And To Find The H-Parameters Of A Bjt For : — N ( A ) C-E Configuration, N ( B ) C-C Configuration, N ( C ) C-B Configuration N 61 Feedback Amplifier Trainer 62 Tuned Amplifier Trainer 63 Oscillator Trainer Kit 64 To Determine The Following Characteristics Of Op-Amp: —A ) Input Offset Voltage, B ) Slew Rate, C ) Non-Inverting Gain, D ) Inverting Gain E ) Adder, F ) Subtractor, G ) Differentiator, H ) Integrator And I ) Voltage Follower 65 To Study The Waveform Of Ujt As Relaxation Oscillator. 66 To Study The Characteristics Of Ic555 Timer Connected As:A ) Astable Multivibrator, B ) Monostable Multivibrator. 67 Multi O / P Programmable Linear Dc Power Supply 68 Digital Trainer Kit ( Experiment 1. -To Verify The Truth Table Of Not, Or, And, Nand, Nor, Xor, X-Nor With Ttl Logic Gates And Cmos Logic Gates. Experiment 2.- To Realize Different Boolean Expressions With Logic Gates. Experiment 3.-To Realize Half-Adder, Full-Adder, Subtractor, Parallel And Serial Full-Adder. Experiment 4-To Design 1’S Complement, 2’S Complement And 9’S Complement Adder-Subtractor. ) 69 Complete Setup To Design / Construct Programmable Up / Down Counter. 70 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer. 71 Complete Setup To Design Controlled Shift Register And Study Their Function. 72 Complete Setup To Design / Construct Parity Generator, Checker And Comparator 73 Complete Trainer Kit Of A To D Converters 74 Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter 75 D / A Converter Trainer 76 Digital I.C Tester 77 A / D & D / A Converter Trainer 78 To Verify The Mesh Analysis And Node Analysis Using Independent And Controlled Source 79 To Verify Thevenin’S And Norton’S Theorems 80 To Verify Maximum Power Transfer Theorem 81 To Verify Superposition Theorem 82 To Study The Series And Parallel Resonant Circuit 83 To Measure The Characteristic Impedance Of Symmetrical T And Ii Networks 84 To Test And To Measure The Cut –Off Frequencies Of The Following: — ( A ) Constant K-Type Low Pass Filter; ( B ) Constant K-Type High Pass Filter 85 To Test T And Pi Attenuator 86 To Study Standing Wave Pattern For A Transmission Line Of Finite Length With: ( A ) Open Termination, ( B ) Shorted Termination And Matched Termination. 2.To Measure The Attenuation Constant And Phase Shift Constant For Matched Termination 87 To Study The Given Rc Integrator And Differentiator At Different Time Constant 88 Study The Construction Features Of Dc Machine 89 To Control The Speed Of D.C. Shunt Motor Above Normal Speed & Draw The Speed Characteristics 90 To Control The Speed Of D.C. Shunt Motor Below Normal Speed & Draw The Speed Characteristics 91 To Determine Equivalent Circuit Parameters Of Single-Phase Transformer By Performing ( I ) O.C. Test ( Ii ) S.C. Test. 92 Study Of Three Point And Four Point Starter 93 Computer Programming Language Laboratory 94 8085 Microprocessor Traineer Kit 95 Microprocessor 8086 Trainer Kit 96 To Study The Amplitude Modulation And Demodulation Ttrainer Kit 97 Am / Fm Radio Receiver Kit 98 Analog Signal Sampling & Reconstruction Trainer Kit 99 Pulse Code Modulation And Demodulation System Trainer 100 Frequency Modulation And Demodulation Kit 101 Delta / Sigma Delta And Adaptive Delta Modulation Demodulation Kit 102 Dpcm & Adpcm Modulation / Demodulation Kit 103 Epbax Trainer Kit 104 Black & White Tv Trainer Kit With Provision Of Fault Finding 105 Dth Tv And Set Top Box Trainer Kit 106 Colour Tv Trainer With Provision Of Fault Finding 107 Tdm Pulse Code Modulation 108 Tdm Pulse Code Demodulation Trainer Kit 109 To Study The V-I Characteristic Of Gunn Diode. 110 Fdm Transmitter / Receiver Kit 111 Digital Storage Oscilloscope 112 Spectrum Analyzer 113 Antenna Trainer 86 - 860 Mhz 114 Microwave Test Bench ( Klystron Based ) 115 Ask / Psk / Fsk Modulation And Demodulation Kit 116 Microwave Test Bench ( Gunn Based ) 117 Antenna Trainer 86 - 860 Mhz ( With Pc Interfacing And Automatic Turntable And Necessary Plotting Software ) 118 Antenna Trainer 86 - 860 Mhz ( Manual Antenna Rotation Set Up ) 119 1 Ghz Spectrum Analyser 120 Antenna Trainer Kit 121 Microwave Power Meter 122 Trainer Kit To Study Reverse Recovery Characteristics Of Power Diodes 123 Power Transistor Drive Ckt Study Kit 124 To Study Drive Circuit Of Scr 125 To Study A Single Phase Rectifier—Output Waveform With Phase Control Circuit 126 To Plot V / I Characteristics Of Triac 127 To Study A Polyphase Rectifier 128 To Study Smps With Pwm Regulator Chip 129 To Plot V / I Characteristics Of Diac 130 To Study A Phase Control Ac Regulator 131 Servo Regulator Stabilizer Study Kit 132 To Study A Jones Chopper 133 To Study Speed Control Of Induction Motor By Voltage And Frequency Variation 134 To Study The Speed Control Of Dc Motor By: ( A ) Varying Field Current Keeping Armature Voltage Constant; And, N ( B ) Varying Armature Voltage Keeping Field Current Constant N 135 Power Electronics Devices Trainer Kit 136 Stepper Motor Study Set 137 Single Phase Bridge Inverter 138 Plc Trainer ( Experiment 1-Use Of Simulation Package For Different Function Of Plc. Experiment 2- Verify Function Of Logic Gates By Using Plc. Experiment 3- Write And Verify Ladder Program For Motor On-Off Control With Two Push Button ) 139 1 Kva Online Ups Trainer Kit 140 Stepper Motor Kit 141 2Mhz Function Generator 142 Power Electronics Development Trainer 143 1. To Study The Operation And To Use: ( A ) Multimeter, And, ( B ) Oscilloscope 2. To Study The Operation And To Use: N ( A ) Af Signal Generator; And, ( B ) Rf Signal Generator N3. To Study The Operation And To Use Frequency Counter N4. To Study The Operation And To Use Frequency Generator N 144 Digital Lcr Meter 145 Distortion Factor Meter 146 To Measure L & Q By Maxwell Method 147 To Measure The Unknown Capacitance By Schering Bridge 148 To Measure The Distortion In A Given Waveform 149 To Construct And Test A Q-Meter 150 To Study The Spectrum Analyzer 151 To Measure The Unknown Frequency By Wein Bridge 152 Microcontroller Trainer Kit 1.Write A Simple Assembly Programs For Na. Addition B. Subtraction B. Multiplication D. Division N2. Write A Programs For ( Any Two Of The Following ) Ni. 4 X 4 Matrix Keypad Interface Nii. Character Based Lcd Interface Niii. Analog To Digital Conversion ( On Chip Adc ) Niv. Serial Eeprom Nv. Seven Segment Led Display Interface Nvi. Interfacing With Temperature Sensor Nvii. Stepper Motor Interface N 153 Microcontroller Simulation Software 154 To Study The Function Of Fibre Optic Analog Link.To Study The Frequency Response Of Optical Receiver At Various Load Conditions. N3. To Study The Losses In Optical Fibre:— N ( A ) Propagation Loss, ( B ) Bending Loss. N4. To Study The Numerical Aperture Of Optical Fibre N 155 To Be Familiar With The Following Network Components 156 To Be Familiar With Mobile Telephone 157 To Be Familiar With Cordless Telephone 158 To Be Familiar With Fax 159 Network Components 160 24 Port Managed Switch 161 24 Port Unmanaged Switch 162 8 Port Hub 163 Access Points 164 Network Passive Component For Networking 165 Lan Trainer 166 Pc Based Optical Fiber Lan Trainer Package 167 Installation & Commissioning Of Network 168 To Measure Displacement With Lvdt 169 To Measure Temperature With Thermocouple 170 To Measure Temperature With Thermistor 171 To Measure Pressure With Strain Gauge 172 To Plot The Characteristics Of Rtd ( Pt-100 ) 173 Temperature Controller With On-Off Controller, Temperature Controller With Pi Controller, Temperature Controller With Pid Controller 174 Oscilloscope 175 Function Generator 176 Experimentation With Transistor Characteristics 177 Common Emitter Amplifier 178 Ujt Characteristics 179 Trainer Kit For Fet Characteristics 180 Trainer Kit For P-N Junction Diode & Zener Diode Characteristics 181 Trainer Kit For Superposition, Thevenins Theorem, Nortons & Max Power Transfer 182 Series Parallel Resonance Of R-L-C Ckt 183 Motor Winding Trainer 184 Automatic Coil Winding Machine 185 Three Point & 4 Point Starter 186 Digital Earth Resistance Tester 187 Digital Multimeter 188 Low Power Factor Analog Watt Meter 189 Power Factor Meter ( Single Phase ) 190 Power Factor Meter ( 3-Phase ) 191 Clamp On Ammeter 192 Calibration Of 3 Phase Energy Meter 193 Kelvin Double Bridge 194 Maxwells Bridge 195 Schearing Bridge 196 Single Phase & 3- Phase Digital Energy Meter With Single Phase & 3 Phase Resistive Load 197 3-Phase With Neutral Resistive Load Box 198 Clip On Type Ammeter 199 Heat Run Test Of A Single Phase Transformer 200 Heat Run Test Of A Single Phase Transformer 201 Determination Of Equivalent Circuit Parameters Of A Single Phase Transformer By O.C And S.C Test 202 3 Phase Transformer For Different Connections 203 D, C. Shunt Generator For Open Circuit Test 204 Load Test Of Dc Series Motor 205 Swinburns Test Of Dc Motor 206 Dc Shunt Motor For Speed Control & Load Test 207 D.C. Compound Motor ( Open Type ) 208 Variable Resistor Wire-Wound Type, Tubular 209 D.C. Power Supply, -I / P-440V, 3 Phase. O / P-220V, 50A 210 3-Phase Autotransformer Starter 211 Different Starters For Induction Motor 212 3 Phase Synchronous Motor With Starter 213 Starting & Reversing Of Single Phase Induction Motor 214 Induction Motor To Measure Slip By Stroboscopic Method 215 Slip Ring Induction Motor For T-S Curve 216 3 Phase Induction Motor ( Semi Open Type ) 217 Multipole Squirrel Cage Induction Motor 218 No-Load Test, Blocked Rotor Test & Load Test Of Induction Motor 219 Synchronization Of 3 Phase Alternators By Synchroscope & 3 Lamp Method 220 Determination Of Parameter & Regulation Of A Three Phase Alternator 221 Tachometer 222 D.C. Servometer Speed Control - Trainer Kit 223 L.V.D.T. To Measure Non Electrical Quantity 224 Proportional, Differential & Integral Controller 225 Strain Gauge & Measurement Of Strain 226 Study Of Proximity Switch 227 Study Kit Of Thermocouple And Temperature Measurement By Thermocouple 228 Demo Board For Different Insulator 229 Dielectric Strength Test Set For Transformer Oil 230 Digital Insulation Tester 231 Digital To Analogue Converter With Power Supply 232 Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter 233 Complete Setup To Design / Construct Parity Generator, Checker And Comparator 234 Complete Setup To Design / Construct Programmable Up / Down Counter 235 Complete Setup To Design Controlled Shift Register And Study Their Function 236 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer 237 Complete Trainer Kit Of Ad Converters 238 Digital Trainer Kit 239 Master Slave J-K Flip-Flop Using Nand Gates With Power Supply 240 Study Of Universal Logic Gates & Napplications With Power Supply N 241 Experimentation With Fet Amplifier 242 Trainer Kit For Colpitt Oscillator 243 Trainer Kit For Wien Bridge Oscillator 244 Trainer Kit For Potentiometer Characteristics 245 D.C. Series Motor Speed Control Trainer ( Scr Driver ) Kit 246 Trainer Kit For Astable, Monostable & Bistable Multivibrator Using Ic-555 247 Trainer Kit For Scr Characteristics 248 Trainer Kit Of Dc Chopper Using Scr 249 Trainer Kit To Study Single Phase Full Bridge Full Controlled Converter ( Rectifier & Inverter ) Using Scr 250 Trainer Kit To Study Integrator & Differentiator Using Opamp-741 251 Trainer Kit To Study On The Applications Of Op-Amp 252 Speed Control Of Induction Motor 1Ph By Using Scr 253 Online Ups Demonstration Kit 254 D.C Network Analyzer 255 Thermal Over Current Relay 256 C.T. & P.T. Testing Trainer Kit 257 Current Differential Relay , Idmt Type 3 Phase Transformer With Fault Creation Arrangement 258 Induction Type E / F Relay 259 M.C.B. Demo Board 260 Transformer Differential Relay 261 To Test Directional Over Current Relay ( Docr ) By Relay Testing Kit 262 3-Phase Alternator Protection Simulator 263 8085 Microprocessor Trainer Kit 264 8085 Microprocessor Based Controller For The Operation Of A Stepper Motor With A Fixed No.Of Steps And To Determine The Angular Displacement Per Step By Measuring The Total Angular Rotation 265 Control Of Dc Motor At Different Speed And To Note Speed Vs Load Characteristics At Open Loop Conditions By 8085 Microprocessor Based Controller 266 Set Up For Checking Of The Phase Sequence Of Three Phase Supply System Using Three Zero Crossing Detectors Controlled By 8085 Microprocessor 267 Set Up For Measurement Of Ac Voltage, Current, Frequency And Phase Angle Difference Using Suitable Pt, Ct, Zcd, Adc, Etc Based On 8085 Microprocessor 268 Set Up For Over Voltage / Under Voltage Or Over Current / Under Current Relay Ckt Using Suitable Hardware Ckt Controlled By 8085 Microprocessor 269 8051 Microcontroller Trainer Kit Nmicroprocessor And Microcontroller N 270 Halogen Lamp 271 Cfl Lamp 272 Trainer For Sodium Vapour Lamp, Mercury Vapour Lamp 273 Lux- Meter 274 Lead Acid Battery With Charger 275 Protable Grinding Machine 276 Electric Power Drill 277 3-Phase Contactor Unit 278 Solder & De-Solder Including Soldering Iron Flux ( Kit ) 279 Dc Power Supply 280 Analog Dc Voltmeter 281 Analog Ac Voltmeter 282 Analog Ac Ammeter 283 Analog Dc Ammeter 284 Analog Wattmeter
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 15
West Bengal View Result →
7.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
8.
Heavy Industries and Public Enterprises #10390733 AOC
Vertical Extension & Other Development Works at Academic Block Annex-2 Palayad Campus, Kannur University, Kannur, Kerala under PM-USHA scheme- 1 Civil work -General Structural work 2 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness 3 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter 4 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. 5 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar 6 Core Cutting of RCC slabs(12cm Maxi.thickness) by using mechanical core cutting equipment of required diameter of the pipe in full depth etc to the satisfaction of engineer in charge including all cost and conveyance materials and labours charge etc complete (dia 80-200mm) 7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 8 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work ( Payment shall be made on the cross sectional area of R.C.C. or R.B work) as per direction of Engineer-in-charge. 9 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 10 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock 11 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 13 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 14 Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 15 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level 16 Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum). 17 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 18 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 19 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 20 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 21 Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) 22 Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges 23 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick. 24 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more 25 Block work & Finishing Work 26 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 27 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 28 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) 29 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 30 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) 31 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 32 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats 33 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 35 Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections. 36 Teracotta Clay Jali work, For Building work, minimum 7.5 cm thick as per approved design and pattern of Engineer in charge in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand) with neat finish, polishing work all complete. 37 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wallwith suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channelof 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG),plaster board conforming to IS : 2095 : (part 3) 1996 (Board with BIS Certification marks) 38 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 39 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 40 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides 41 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness 42 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm 43 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- charge. 44 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm 45 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 46 Joinery 47 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 48 Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer- in-charge. 49 Providing and fixing factory made uPVC white colour casement/casement cum fixedglazedwindowscomprisingofuPVCmulti-chamberedframe,sashand mullion(whereeverrequired)extrudedprofilesduly reinforcedwith1.60+/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension,EPDMgasket,stainlesssteel(SS304grade)friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mmsizeforfixingframetofinishedwall,plasticpackers,plasticcapsand necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). 50 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness 51 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood 52 Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood 53 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc 54 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 55 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm 56 Providing and fixing CP Brass Handle 450mm in all types of doors with the necessary fittings and arrangements all complete. 57 Providingand fixing chromium plated brass handles with necessary screws etc. complete:200 mm 58 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality, with necessary screws etc complete as per direction of Engineer- in- charge. 59 French spirit polishing:Two or more coats on new works including a coat of wood filler 60 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece 61 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1800X2250 mm. 62 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1000X2200 mm. 63 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) 64 Providing and fixing SS H handle having min 45 cm length in toughed glass door including all necessary screws etc. complete. 65 Providing and fixing of glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete 66 Fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in- charge. 67 Providing and fixing 3M Fasara frosted etching film of thickness 25 microns self- adhesive of approved colour, shade, and quality with cutting as per approved design and pattern, including cleaning of glass and making surface smooth for fixing of film to the surface, all completed as per the direction of the engineer in charge. 68 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 69 Providing and fixing ball bearing for rolling shutters. 70 Sanitary and CP Fittings 71 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 72 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid 73 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 74 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 75 Providing and fixing ceramic urinal partitions of standard size as per direction of Engineer-in Charge and of approved shade 76 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 77 Providing and fixing uplasticised PVC connectionpipe with brass unions: 30 cm length15 mm nominal bore 78 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter 79 Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore 80 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x510 mm bowl depth 200 mm 82 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm 83 Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in- charge. 84 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 85 Flexible pipe32 mm dia 86 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with C.P. brass screws and washers complete. 87 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 88 Providing and fixing SS grating of approved quality and colour. Rectangular type with openable lid150 mm nominal size square 100 mm diameter of the inner hinged grating. 89 Providing and fixing disabled friendly bathroom kit with all accessories including wash closet with soft close seat cover and cistern with twin flush setting, wash basin of min dimensions 510mm x 400mm with all necessary fittings including Angle cock, Connection pipe, waste pipe, Spatula Lever basin mixer, Wall mounted 600mm long, Wall mounted grab bar 600 mm long and wall mounted hinged rail 750 x 750, Health Faucet with angle cock. Recommended Makes : CERA , Hindware, Jaguar or equivalent . 90 Plumbing 91 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall32 mm nominal outer dia pipes 92 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall40 mm nominal outer dia pipes 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall50 mm nominal outer dia pipes 94 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes 95 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes 96 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore 97 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore 98 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore 99 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 100 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall 101 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall 102 Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall 103 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow 104 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee 105 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer 106 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 107 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2 108 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 109 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall 110 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend 111 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee 112 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl 113 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia End cap 114 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow 115 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall 116 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 117 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee 118 Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl 119 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap 120 Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow 121 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer 122 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore 123 Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 124 Yard Plumbing 125 Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 126 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling 127 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S ( non modular) bricks of class designation 7.5 128 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single pushfit Coupler110 mm 129 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.50110 mm bend 130 Tile and Granite work 131 Providing and laying Matt Finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1200 x 600 mm. 132 Providing and laying Matt finished Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 1200x600 mm 133 Providing and laying Anti Skid matt vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. 134 Providing and laying premium vitrified bathroom wall tile in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 135 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm 136 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining ( veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 ( 1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade ( To be secured to the backing by means of cramps, which shall be paid for separately).Area of slab over 0.50 sqm 137 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade. Area of slab over 0.50 sqm 138 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 139 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work 140 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 141 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 142 Providing and fixing 12 mm thick gang saw cut, mat /rough finished granite, machine cut for steps, ramps or inclined plate form with raking and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 143 Structural steel 144 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 145 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 146 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 147 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 148 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 149 False ceiling 150 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board 151 Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit. 152 Rainwater Harvesting ,Fire Tank,Septic Tank 153 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock 154 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock 155 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 156 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 157 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level 158 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 159 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm 160 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm. 161 Supplying and fixing C.I with frame for manholes: 600mm x 600mm ( heavy duty) the weight of the cover and frame shall not be less than 208 kg 162 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 163 Providing and placing on terrace (at all floor levels) Stainless Steel 304as per IS 5522:1992 of capacity 5000 Litreswith suitable fixing arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 164 Providing and fixing of Fire Rated door 1200x2100mm- Hollow metal fire doors at all levels from ISO 9001-2015 certified Manufacturer. Fire door should be as per NFPA 80 and NFPA 252. All fire doors should be tested at UL for 120 minutes and should pass both UL10B and UL10C. Doors shall be made from pressed galvanized steel confirming to IS277 as per following specification.Frame:Door frame shall be single rebate grooved profile of size 125 x 55 mm made out of 1.6 mm (16 gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self-tabs. Frames to have in build grooved sealing system and shall be site fitted with fire rated EPDM gasket as standard. All provision should be mortised, drilled and tapped for receiving appropriate ANSI UL labeled hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff and the gaps shall be sealed with silicon sealant.Shutter: Door leaf shall be 46 mm thick fully flush double skin door without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) minimum thick galvanized steel sheet.The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI standard. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.Door and frames shall be finished Pure Polyester Powder coated and shall have passed minimum 500 hours of salt spray test.Vision glass: The glass shall be 5mm clear fire rated glass of equal rating and not exceeding size of 114 sq. inches.Door Hardware: Stainless steel Ball bearing Hinges 3 Nos, Minimum 90Kg hydraulic surface applied rack and pinion door closers, Mortice Sash Lock with cylinder. One Side Handle and Other Side with 2 point Panic Bar. 165 Road Work 166 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 167 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 168 Water proofing 169 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 170 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) 171 Landscaping 172 Supplying of Flowering Shrubs (Heliconiya st. Vincent red, Ixora bush, Cana durf etc..) 173 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removalof unsaverieable material?s as per direction of officer in charge (including cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100) 174 Providing and Laying Landscaping of outdoor area with buffalo grass and small plants with all necessary levelling and filling as required. 175 Signage 176 Providing and fixing in position the signage board made out of 3 mm opaque PVC foam board of computerised cut, PVC non reflective self adhesive vinyl painted foam board of required size and colour. 177 Providing and fixing non lit Signages made of CNC Cut Stainless Steel projected letters and fixing it at site with all necessary fitting arrangements and accessories as per the design and requirement on instructions of the engineer in charge. 178 Furniture 179 Two tiered reagent racks (MS with powder coating) with granite top of 150 mm depth for side workbenches. The two tier should be placed at a minimum spacing of 300 mm. The item should be in compliance with IS 4209 (2013), NABL etc. The Length should be customized as per lab workbench and vertical posts must be placed at appropriate spacing. 180 Supply and Installation of Sink Module with SinkEach sink module should have a minimum dimension of 900 mm (L) x 900 mm (W) x 900 mm (H) and made of MS as per IS 1730 shall be designed with a single cabinet (with 2 shutter, SS304 hinges for easy and noiseless opening and closing mechanism). This module should include a sink made of 5 mm thick polypropylene with black color body. Minimum Dimension of the sink: 450 mm (L) x 600 mm (W). Sink should include PVC tap connection-15mm diameter (Goose neck type), grating etc. The sink module shall be portable and provided with 18mm thick granite table top (with cut out for providing sink). Item to be inclusive of all necessary fitting arrangement.The item should be in compliance with IS 4209 (2013), NABL, WHO etc. 181 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 750 mm D 182 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 890mm D 183 Supply, Installation, Testing and Commissioning of Eye wash with Brass inject mould with epoxy powder coated body with auto released Valve and cup shaped water dispenser with min 1/2 HP power pressure booster pump 184 Counter Height Stools :Supply and erection of counter height stools ( bar stools ) of following specifications : Revolving adjustable Chrome plated steel body chairs with resistance to the corrosion. Cushion Seat with Lift mechanism for Adjustment of height. Minimum height 750mm before expansion. Medium Back rest and arm rest. Item shall be of reputed make. 185 Office Chair: Non-revolving executive chair with fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric, Upholstery: Heavy duty rubber backed fabric in BLACK ( Size -55x60 cm) 186 Executive Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 187 Revolving Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 188 Cabinet/Wardrobe: Providing and fixing Cabinet/Wardrobe unit with 18 mm thick Multi wood board with one side decorative and other side balancing lamination. cupboard shutters edge to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with fixing chromium plated brass 50 mm cupboard or wardrobe knobs, special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Depth of shelves to be 300-600mm and shelves to be fix with proper support and bracket holders. as per layout drawing approved by Engineer in charge. Make laminate: Greenlam/ Merino / Century. Only front elevation will be measured. 189 Supply and erection of Airport type 3 seater waiting chair with powder coated chromium finish having minimum dimensions 1675mm length X 710mm width X 775mm total height and 400mm seat height . Seat: High quality cold rolled 1.2mm thick steel perforated sheet pressed and welded to form the shape. Arm & Leg: High quality 1.2mm thick MS Tube / Sheet . Cross bar: High quality cold rolled 2mm thick steel sheet pressed and welded to form the shape. 190 Table of size Min 2300x600mm Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. The table is provided with 1 drawer, 1 Storage, 1 key board locks, handles, mini fix, dowels and screws. Exposed edges to be finished with 0.8 mm edge band as per specified colour. 191 Supply of wooden table with one drawer and Cupboard unit made of hard wood varnishing/painting all complete. Size: 1200x600x750mm 192 Providing & supply of Conference Table with executive chair of 13 Pax with the following specifications.Table top size :3600 x 1200mm. Table Tops –made of 25mm thick MDF with waterfall top edges finished in PVC Membrane using unique wrap around technology for better aesthetics & long lasting use. Under structure – Legs made of 25 mm thick standard Black matt colour post formed panels interconnected with 18mm thick standard Black matt colour pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management & Concealed wire management to take care of basic wiring requirements both horizontally & vertically. For closed configurations, liftable top cover, made of 12mm MDF finished in PVC Membrane, is provided to access the horizontal wire carrier. Vertical wire management is through flexible vertical wire manager, popup grommet with power & RJ45 Socket. Designed for Flexibility through modular Construction, PVC Membrane Finish Tops for seamless surface, Post formed Legs for safe use, Provision for easy wire management, Upgradeable / reconfigurable for future needs. 13 Nos Revolving adjustable type Medium height Back Office Chair with arm rest with back tilt and swivel mechanism constructed out of mild steel and high quality plastic. 193 Supply of wooded Chairs with armrest of Hard Wood Plank Seat and Reaper Back. 194 Supply of Wooden Bench and Desk made up of Mahagani of minimum size - Bench Size :1 83x30X46cm Desk Size :183x41x75 cm 195 Supply and installation of steel podium made of SS304 with min dimensions 500mm X 450 mm X 1200mm and having a sloped top surface, and having a decorative/ plain front face all made of SS 304 as per the design and approvals of the architect/ Engineer - In - Charge 196 Wiring-General Electrical work 197 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C 198 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 199 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 200 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 201 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 202 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 6 Sq.mm + 1 x 6 sq.mm earth wire 203 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C 204 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 205 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 16 sq. mm + 1 X 6 sq. mm earth wire 206 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 207 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 208 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 209 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 210 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm 211 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm 212 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair 213 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 214 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 215 Fixtures 216 Supply and Fixing suitable size modular GI box with cover in front on and providing and fixing 1 no RJ 45 including connections as required. 217 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 218 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 219 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet 220 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 221 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet 222 Supply and Installation of surface/recess mounted LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting. The luminaire should have CRI > 80 and CCT of both 6500K/5700K, Cool White Light. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3700 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 36 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro or equivalent 223 Supply, conveyance and Installation of compact, 2 feet,10-15W,LED tube light with high lumen giving soft glare free light including all required mounting accessories, frames complete. (Philips/WIPRO/Havells or equivalent) 224 Supply, Installation of surface mounted LED Tubelight. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 30 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 25k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make - Philips, Crompton, Wipro, Havells 225 Supply, Installation of surface/recess mounted LED Round/Square luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 110 lumen/watt and Minimum system wattage of 10 -15 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro 226 Supply, conveyance and Installation of compact 10-15W LED Bulkhead Light giving soft glare free, Cool White light & complete with electronic driver including all required mounting accessories, frames, complete ( Make: Philips/WIPRO/Havells or equivalent) 227 Supply, Installation, Testing and Commissioning of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 228 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 229 Supplying, conveyance and Installation of 150-250 mm sweep,1350 rpm, 3 - 5 blade BLDC Exhaust Fan including frames and all mounting accessories complete.Recommended Make: Atomberg Efficio/Crompton Brisk Air 230 Supplying, conveyance and Installation of BLDC Type Wall Fan having 3 blade, 400 mm sweep, Speed 1350 rpm, Air Delivery 70 CMM minimum, Wall Mount Fan including frames and all mounting accessories complete. Recommended Make: Atomberg Renesa/V-Guard ENVIRO WF BLDC/Havells Platina 231 Supply, Installation, Testing and Commissioning of 450 mm sweep, 900 rpm heavy duty exhaust fan with louver in existing opening including making good the hole to suite the size of above fan complete with connections using 3 core 1.5sqmm multi core pvc sheathed copper conductor cable etc as required. 232 SITC of skirting light fitting with white LED 3 module along with suitable size modular metal box with inner and outer plates with all accessories. 233 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). 234 Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. lCD 235 Supply and installation of 2 Nos. 4 ft MS powder-coated hanging rods for tube lights, including supply and laying of 1.5 sqmm copper PVC insulated FRLS wire (3 runs: Phase, Neutral, Earth), necessary hardware (ceiling clamps, saddles, junction box, connectors), complete mounting, terminations, testing, and labour charges — complete in all respects. 236 Network and CCTV System 237 Supply of 16 ports Network Switch, Rack-mountable 10/100/1000 Mbps, Switching capacity 35.7 Mbps Features: Flow control, Layer 2 switching, auto-negotiation, auto- uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, Quality of Service (QoS) Power: AC 120/230 V (50/60 Hz) complete. Make D-Link/TP Link/Cisco or equivalent 238 Supply Installation Testing and Commissioning of 32 channel embedded Linux NVR (Network Video Recorder), must connect 32 channel IP cameras, Should support min 2 SATA HDD and each should support Min 2TB and must record video simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smart Event, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(HEVC)/H.264+/H.264, 2 Year Warranty, Image quality should be maintained throughout the warranty period. Make: CP Plus/Hikivision/Dahua or equivalent 239 Network Switch for CCTV. 16 Port PoE Switch 1000BASE-T Copper Ethernet PoE+ connections, 10M/100M/1G RJ-45 copper ports, 1000BASE-X Fiber SFP ports, 16 port Auto sensing 10/100/1000 Mbps PoE, minimum CPU memory 512 MB with 2 SFP/combo ports, Energy Efficient Ethernet (IEEE 802.3az) Make: CP Plus/Netgear or equivalent 240 Supply, Conveyance and Installing of 2MP IP Dome/Bullet Camera having Progressive Scan True Day and Night Colour IR Camera having effective pixel of 2 MP, Video frame rate of 2MP @30FPS, Minimum illumination of 0.01 [email protected], 0 lux@IR On, 20 M IR Range, 24 IR LED, AWB, AGC, BLC, 2D Noise reduction, with 3.6mm board lense, 12 VDC, PoE IP67 rated weatherproof performance. 1 year warranty. Make: Bosch/CP Plus/Honeywell or equivalent 241 Supply and fixing of 6U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete 242 Supply Installation Testing & Commissioning of 16 Port Loaded Cat 6 - U/UTP Modular Toolless Patch Panel having a metal structure enabling them to be durably fixed to the uprights of the 19 chassis. Include rear cable manager to hold cables without need for cable ties. The termination of I/0s shall be without any manual crimping tools. 243 Supply and fixing of 4U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete. 244 Supply and connecting 2 meter long CAT6 cable Patch cord having RJ45 connectors crimped at both ends, to the existing outlets as required. Make: D-Link/TP-Link or equivalent 245 Supply and Installation of LED Color display of minimum 32 inch screen, complete, UHD display Make: LG/Samsung/Panasonic or equivalent. 246 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable 247 Supply, Installation and Integration of Dual Band WiFi Access Point on false ceiling along with accessories, having Fast Wireless Speed, simultaneous 2.4GHz 300Mbps and 5GHz, 867Mbps Dual Band connections for 1.2Gbps of total available bandwidth, Superior Coverage of Four Fixed External antennas provide stable wireless connections and optimal coverage, App Control, Interface of 1× 10/100 Mbps WAN Port and 4× 10/100 Mbps LAN Ports having Working Modes (Router Mode / Access Point Mode). Make: TP-Link/Netgear/DLink or equivalent 248 UPS 249 Supply, Installation, Testing and Commissioning of True on-line Double Conversion 10 KVA UPS system with 3:3 Crest Factor Three Phase Input Three Phase Output. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : a) Phase – Three Phase with ground b)Voltage range 190 VAC – 470 VAC c)Input Frequency :50/60 Hz d)Power Factor : 0.95 or above e)THD : less than 5% with full load Bypass f) Voltage Range – 200VAC – 240 VAC ) Frequency range – 45-55 Hz/55-65 Hz Output Voltage Range h)Voltage Range – 200VAC – 240 VAC i)Frequency range – 50/60 Hz j)Voltage distortion – linear load <= 2% k)Voltage distortion – nonlinear load <= 5% l)Output waveform – pure sinewave m) Crest Factor – 3:1 Minimum Back up time : Continuous 30 Minutes at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type: Sealed Lead Acid Maintenance Free DC Voltage : 96V DC System, Battery Nos and capacity shall be designed for optimum storage space. Installation &Commissioning Required Breakers also needs to be provided in input and output side for the UPS. Make: Liebert Vertiv/APC by Schneider/Numeric by Legrand 250 Cable Trays 251 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness 252 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness 253 Fan Clamp 254 Providing and fixing 16 mm S.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 255 DB and Switchgear 256 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) 257 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 258 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 259 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door 260 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 261 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural 262 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole 263 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 264 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 265 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 266 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 267 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 268 Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts C curve TP MCB complete with connections, testing and commissioning etc. as required. 269 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole 270 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral 271 Earthing and Lightning Arrestor 272 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required. 273 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 274 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. 275 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 276 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 277 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 278 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. 279 Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. 280 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 281 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. 282 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) 283 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 284 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG) 285 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) 286 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG) 287 Street Lights 288 Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 289 Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 290 Water Purifier 291 Supply and Installation of Water Purifier having Multi-Stage Filtration: RO (Reverse Osmosis), UV (Ultraviolet), UF (Ultrafiltration), Storage Capacity: 7-9 Liters, Purification Features: RO: Removes dissolved impurities, heavy metals, and salts.UV: Kills bacteria, viruses, and other microorganisms. UF: Filters out fine particles and microorganisms. Mineral Booster: Adds essential minerals to enhance water taste.TDS Controller: Adjusts Total Dissolved Solids for taste preference. ActiveCopper: Infuses copper ions into the water for added health benefits.Aqua Taste Booster: Enhances the taste and maintains optimum pH level. In-Tank UV Disinfection: Keeps stored water pure.Smart Display/Indicators: Alerts for filter change, UV fail, water level, and service needs. Super Fine Sediment Filter: Removes fine and coarse particulate impurities. Water Level Indicator: Monitors the purified water level in the storage tank. Make: Aquaguard Aura 7L/ Bluestar Aristo 7L/Kent Grand Plus ZWW 9-Litre/ LG 8L 292 LT Cabling and Termination 293 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 294 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 295 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp 296 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 297 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp 298 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm 299 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm) 300 Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 400 sq mm 301 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm) 302 LT Panels 303 Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work. General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall befl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 400A 3kA 4 Pole MCCB - 1no Ics = 100% Icu rating Digital Voltmeter 0- 500V with selector switch & Digital ammeter (0-400A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 400A. Out going : 250A ,50kA 4 Pole MCCB - 2no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 304 Lift panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 40A ,16-25kA TP MCB - 6 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list.Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 305 Sub Panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required. Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch &Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 32A ,16-25kA 4 Pole MCCB - 4 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 306 SSB2- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 250A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-250A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 250A. Out going : 1) 63A ,16-25kA 4 Pole MCCB - 8 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 307 Transformer 308 Supply , Installation, Testing and commissioning of 500 kVA outdoor unitized substation with an 11kV/433V dry-type cast resin transformer and a 630A VCB typically includes a compact prefabricated design conforming to IEC62271-202 standards, offering IP53/IP23 protection, and featuring compartmentalized construction to prevent accidental entry into energized areas. The substation is designed to withstand electrical impulses, thermal, and dynamic stresses, ensuring reliable and robust performance with low power loss and noise levels. The installation involves placing the substation on a prepared concrete plinth, connecting high-tension (HT) and low-tension (LT) cables, and ensuring proper earthing and safety measures. The commissioning process includes testing the transformer, switchgear, and protection systems to verify operational integrity. Make: Unipower/Intrans/Voltamp 309 MSB and APFC Panel 310 Supplying, installation, testing & commissioning of cubical type MAIN SWITCH BOARD suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface area 6 sq.mtr (Approx.) fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 630 Amp capacity extensible type TPN aluminium alloy bus bars of height conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :- Interlocking:Electrical through advance contacts in MCCB/ ACB’s (incomers & bus couplers) and mechanical (castel key) interlocking should be provided to ensure that only one supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section.Interlocking b(I) Incoming : 2 Nos 800 Amps (DG and MAINS) each four pole ACB of fault breaking capacity 50 KA (Ics=Icu upto 433 V manually operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993 as amended up-to-date complete with following accessories for each MCCB(a) Independent manual spring closing mechanism- 1 No.(b) Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection- 1 set.(c) Digital* type Voltmeter (0-500 V), with selector switch & back up HRC fuses/MCBs-1 set. (d) Digital* type Ammeter (0-.600 Amp), with selector switch and one set of 3 nos. CT’s of ratio. 800/5A Class I accuracy and 15 VA burden- 1set. (Ratio to be fi lled up).(e) 3 Nos. Phase indication LED lamps with 2 Amp back up HRC fuse, breaker ‘ON’ indicating light with 2 A HRC fuse, test terminal block set, fuses, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required.(f) Shunt trip coil 220 V A.C. (II) Bus Bars :TPN aluminium bus bars of minimum of 800 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec (II) Outgoing :(1) (a) 4 Nos. 250 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 250/5 Amps Nos. (c) Digital* type ammeter (0- 400 Ap) with selector switch set. (2) (a) 1 Nos. 200 Amp4 Pole MCCB for (Ics = 35 kA upto 433 V) (b) CT’s of ratio 200/5 Amps set (c) Digital* type ammeter (0- 250 Amp) with selector switch set. (3) 3 Nos 160 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 160/5 Amps set (c) Digital* type ammeter (0- 200 Amp) with selector switch set. The switchgears/measuring instruments shall be as per the Choice of the Engineer in charge. The panel shall be mounted on required structural steel supports and frames for mounting, the price quoted shall be inclusive of the same. The panel shall have suitable provision for connecting to the incoming cables of 3R x 400 sqmm XLPE Aluminium cables and shall be provided with necessary earth leakage relays as per the Inspectorate Norms. The panel shall be as per the IS standards and shall conform to all norms of EB/Inspectorate/CEA. Make of Switchgear : ABB/L & T/Schneider Electric/Siemens/Legrand 311 Design, Manufacture, Supply, Installation, Testing and Commissioning of Automatic Power correction Panel having Incomer: 250A, TPN MCCB, Digital Multifunction meter for V,A,F,PF With CTs CL:1 with RYB Indication lamps-1 Set 250A Aluminium bus bar with heat shrinkable insulation sleeves-1 set, Intelligent power factor controller with control MCBs etc. complete The panel shall comprise of suitable combination of capacitor banks upto a total of 100 kVAR and shall be designed as per the standards of Electrical Inspectorate/CEA. 312 DG and AMF Panel 313 Supply, Installing, Testing and Commissioning of & Silent Type& Diesel Generating set having CPCB IV+ acoustic enclosure having Prime Power Rating of 500 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: Diesel engine radiator cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Engine mounted Instrument Panel fitted with and having digital display and necessary indication coupled to Synchronous alternator rated at 500 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor. Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Daily service fuel tank of 440-460 litres capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Dry exhaust manifold with hospital exhaust silencer and catalytic convertor. 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (lead acid type) as required as per specifications. Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. 314 Design, Fabricating, Supply, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 500 KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following: (a) 1 Nos. 630 Amp., 50 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50-100% having adjustable OL & SC. Set at 350A (b) Auto/Manual/Test/Off selector switch (c) 2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay. (d) 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering(e) Energy analyser unit to indicate current voltage frequency power factor and KWH(f) Indicating lamps for load on mains and load on set(g) Fuse for instruments(h) Battery charger, complete with transformer/ rectifi er, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.(i) Main supply failure monitor(j) Supply failure timer(k) Restoration timer(l) Control unit with three impulse automatic engine start/stop and failure to start lockout.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator(o) Audio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load/maximum load warning. AMF Panel shall be connected to Main Switch Board incomer with necessary interlocking arrangement to prevent simultaneous switching on of power supplies. All integration between Main Switchboard and AMF Panel is under contractor scope. 315 HT Cable 316 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3 core 300 sq mm 317 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm 318 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm 319 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm 320 Air Conditioning Works 321 Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1 dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 2 TR 3 Star rated (inverter type AC) as per BEE 322 Supplying additional copper piping of required size and connecting the same to the available piping and extension of the same through 100mm PVC duct inside false ceiling. 323 Electrical Dismantling Works 324 Dismantling of existing outdoor transformer and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 325 Dismantling of existing DG set 100 kVA, AMF panel etc and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 326 Electrical Works- Fire 327 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm 328 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 329 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 330 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 331 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm) 332 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) 333 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm) 334 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 335 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 336 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 337 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 338 First Aid Hose reel &Wet Riser system 339 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585b.20 mm nominal internal dia gun metal globe valve & nozzle. c.Drum and brackets for fixing the equipmets on wall.d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m 340 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 341 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe 342 Supply and fixing of Air release valve SS body of 25 mm dia (UL Listed). 343 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 344 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 345 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) 346 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304) 347 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel 348 Hose Box - Supply, Installation, Testing and Commissioning of Hose Box -Double door - (cabinet) to accommodate Two pieces of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of MS sheet, painted in approved red colour with glass fronted hinged doors and lock &key (UL Listed). 349 Supply and Installation of Fire Brigade Draw-out Collecting head of CI Body having gunmetal 63mm dia instantaneous male draw out confirming to IS:903 suitable to fit on 100mm dia pipe with necessary flanges, rubber gasket, nut & bolts and other items. 350 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 351 Fire extinguishers 352 Supply &installation of ISI ABC type fire extinguisher of 4 kgs. Make SAFEX/ MINIMAX / CEASEFIRE or equivalent(UL Listed) 353 Supply &installation of CO2 type fire extinguisher of 4.5 kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 354 Supply & installation of water mist type fire extinguisher of 9 liters. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 355 Supplying & Installing of Clean agent based automatic modular fire extinguisher (ceiling mounted) suitable for A,B,C class fires & electrical fires, Capacity- 5Kg 356 Supplying & Installing of Mechanical Foam (Stored Pressure) Type fire extinguisher of 9L capacity with mounting clamp. ISI approved. Make : SAFEX/MINIMAX/CEASEFIRE or equivalent 357 Fire Pumps & Fire Panel 358 Electric driven Main Fire Pump: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 56 m Head 359 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head 360 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)a.Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325.c. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. As required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head 361 Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.Jockey Pump63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.DIESEL ENGINE CONTROLControl for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 362 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 150mm 363 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 80mm 364 Supply and Installation of 12V DC, 200Ah maintenace free battery suitable for Diesel Engine driven fire pump operation with required connect cable set, battery stand. 365 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 100mm 366 Signages 367 Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/Fire Exit/ Staircase/FIRE/Fire Station/Fire Fighting Equipment/Fire Duct/ Fire Extinguisher/ Floor/Fire Command Centre/Fire Pump Room/ No Smoking / Danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ In case of the fire do not use lift, use stairs and other mandatory signages recommended by Fire Departments having dimension 30 cm x 15 cm complete inculding fixing mechanism. 368 Supplying and Installing in position the signages approved by Kerala state fire service - of minimum size 1ft x 1.5ft made out of PVC rigid sheet 3mm thick with computer cut PVC non- reflective self adhesive imported vinyl painted on the front of PVC rigid sheet complete with wall mounting arrangements with mirror screws. with lettering- ASSEMBLY AREA 369 Signboards: Supply and Installation of Fire Escape Plan with fire fighting equipment location, exit in A3 Foam sheet with plastic lamination with necessory accessories to fix it on wall. 370 Supply and fixing in position & Fire Order& signage in suitable size made of high quality PVC foam sheet with photo luminescent lamination to make it glow automatically in the dark, with suitable arrangement to fix it on wall. 371 Supplying & fixing in position Assembly Point sigange in suitable size on aluminium composite panel with suitable stand to fix it on open area outside building. Assembly Point 372 Terrace pump 373 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)a.Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-F insulation, conforming to IS-325.c. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head 374 Design, Supply, Installation, Testing, and Commissioning of an Automatic Terrace Fire Pump Panel, including:- IP54-rated enclosure with powder-coated CRCA sheet steel.- 32A 16kA MCCB, 15 HP-rated pump 3P contactor, overload relay, and pressure switch for automatic pump operation.- Auto/Manual selector switch, START/STOP push buttons, hooter, timer, and protection features (dry-run, phase failure, etc.).- Indicators (Power ON, Pump Running, Fault, Low Pressure), meters (Voltmeter, Ammeter with selector switches).- Copper wiring, termination, and provision for cable glands.- Installation, onsite calibration, and full functional testing for pressure-based automation. 375 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 376 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 377 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 378 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 379 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100mm dia 380 Pressure Guage-Supply, Installation, Testing and Commissioning of pressure guage, 4 & dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 381 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations (UL Listed).20 mm dia Make : Kartar/ Atom 382 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 383 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 384 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 385 Above Ground Piping 386 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia 387 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia 388 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia 389 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :250 mm dia (wall thickness 6.3 mm) 390 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia 391 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :200 mm dia (wall thickness 6.3 mm) 392 Supply and Installation of 80mm dia M.S. &C& Class Diesel Engine exhaust pipe duly insulated with 50mm thick Glass wool with 1mm thick aluminium sheet cladding with bellows, flexible joint, necessary support, making hole in brick wall for pipe installation.Pipe dia 80mm 393 Underground piping 394 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 150 mm. Make - TATA / JINDAL 395 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 200 mm. Make - TATA / JINDAL 396 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (1m below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 100 mm. Make - TATA / JINDAL 397 Valves, measuring devices & switches 398 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:200mm dia 399 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required80 mm dia 400 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 401 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia 402 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80mm dia 403 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia 404 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.150mm dia 405 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 406 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 407 Pressure Gauge-Supply, Installation, Testing and Commissioning of pressure gauge, 4 dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 408 Supply and fixing of Air release valve Brass body of 25 mm dia (UL Listed) following IS standards, with required pressure rated. 409 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 410 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 411 MOEFA system, Automatic Detection & Fire Alarm System 412 Supplying, installing, testing and commissioning approved make Microprocessor based Multi-loop, Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 trouble events including1000 alarm log history events, Self Programmable alphanumeric keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop and shall be extendable upto 10 Loops. Each loop shall have a capacity of minimum 125 detectors & 125 other devices exculding 20% spare. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition with the charging capacity of 200AH. The panel shall be capable of self programing without any dependancy on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for progamming the panel with all necessary licence. Panel shall have Modbus over IP protocol for future integration with BMS. However, for present arrangement FA system will be standalone with 24x7 monitoring. The panel shall be capable of connecting to the cloud platform/solution. Complied to meet UL864, 10th Edition 6 Loop Networkable Addressable Fire Alarm Control Panel(Make: Honeywell or Equivalent) 413 Supplying, installation, testing & commissioning of addressable fire control module complete as required. 414 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 415 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 416 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 417 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 418 Supplying, Installation, testing & commissioning of external power supply unit provides regulated and filtered 24 VDC power for hooter operation.Battery backup with built in charging. 419 CABLING & WIRING Supplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 420 Miscellaneous 421 Preparation of initial and final drawings, submission to Panchayath, Municipality, KSEB, Electrical Inspectorate, Kerala Water Authority, State Pollution Control board, Fire Department, Factories and Boilers and other agencies if any for getting approval, sanction and No Objection Certificate for building permit and completion from Fire Department and other department. Quoted rate shall be excluding statutory fee (All statutory fees shall be borne by Client-actual statutory fees shall be reimbursed on submission of original bill/challans from authorities).
Contract Date: Jul 17, 2025 Contract Value : 11.48 Crore
Boards / Undertakings / PSU No of Bidders 1
9.
Housing Urban and Rular Development #10191469 AOC
Furnishing Work Of Classrooms, Library And Laboratory, Equipments And Miscellaneous Work For The New University Campus Of Binod Bihari Mahato Koyalanchal University, Dhanbad- 1 Supplying Metal Exhaust Fan 300 mm Sweep-Supplying, erecting and testing of approved make 300 mm sweep Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including frame bolt/ Anchor hole fastners etc, complete finished of a as required. 2 Wall Demolition- Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 3 Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 4 Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5 Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 6 Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 7 Door Frame- Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile C - Fixing with adjustable lugs with split end tail to each jamb 8 Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. 9 Extra for providing and placing in position 2 Nos 6mm dia. M.S. barsat every third course of half brick masonry. 10 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 12 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. 13 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.-Granite stone slab colour black, Cherry/Ruby red-Area of slab over 0.50 sqm 14 Sink- Supplying fitting and fixing white glazed fires clay sink of approved make with overflow arrangements supported on C.I. Or R.S. Painted bracket 40mm. Dia C.P. Brass waste with C.P. Brass chain and rubber plug 40mm dia P.V.C. Waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams including cutting wall and making good the same etc. all complete as per specification and direction of E/I. Size-600 mm x 450 mm x 250 mm ) 15 FULL HEIGHT WOODEN PARTITION WITH PARTLY GLAZING- Providing and fixing partitions made of 50 mm x 50 mm pine wood / 2nd class teak wood @ 600 mm c/c both ways with the help of Fasteners/Screws etc. to achieve desired strength. Providing & fixing Comm. grade 12 mm thick commercial Pty board on the frame on both the faces i/c exposed side edges of Frame & 1.0mm thk Laminate on both outer faces and exposed side edges of ply as per the directions. Partition shall also be provided with 8 mm thick clear float glass of approved size with Polished Edges of approved brands in Wooden Partition Openings as required, fixed from all four sides from both ways inside partition openings with 10mm.tk. T.W. beadings/12 mm thick MDF Board Lipping/D-Buttons of design as per approval and direction at site. Etching / Etching Film (50 Microns) is to be provided as per approved pattern on 8 mm thick clear float glass. All wooden exposed surfaces shall be melamine polished in approved shade and texture finished as per the directions and satisfaction of Engineer In charge, compelete.This work will 16 Frosted glass sheet of nominal thickness 4 mm- Providing and pasting frosted film on glass work including all materials tools, plants and labour complete as per the directions of the Engineer-in-charge. 17 Supply & laying of PVC insulated and sheathed 1.1 kv grade twin twisted 1.5 sqmm cu flexible wire for speaker. 18 Providing & installation 1.5 Tr. 5 Star split A.C (Inverter Type) I91391-part-1 19 Copper refregerant pipe-Providing & installation Copper Tube of size 5/8 for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation 20 Providing & installation 5 KVA wall mounted automatic voltage stablizer from range 140 V to 280V 21 Providing & installation Drain Pipe for AC 22 Non Schedule 23 * PROVIDING AND SUPPLYING MODERN DESIGN RECEPTION DESK IN ENGINEERED WOOD MAKE THE PRODUCTS UTILE AND A DELIGHT.TIMELESS DESIGN THAT ELEVATES YOUR OFFICE SPACE STRUCTURE OF SPACIOUS RECEPTION DESK,TABLETOP OFFERS YOU A GENEROUS LOOK FOR WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 1800 MM(L)X 600 MM(D)X 750 MM(H) WHICH GIVE MORE SURFACE AREA FOR WORK ,TABLE TOP MADE OF25MM THICK ALSO TABLE TOP BASED ON SIDE PANELS MADE 18MM THICK PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST. * COMBINATION CONSTRUCTION OF RECEPTION DESK ABOVE TABLE TOP 18 MM THICK COUNTER TOP TO TABLE TOP HEIGHT IS @ 300MM ,OVERALL RECEPTION DESK HEIGHT IS @ 1050MM WITH COUNTER TOP,TABLE TOP MADE 25 MM THICK PRELAM PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK PVC EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED WITH HOT MELT GLUE.ALONG WITH 18MM THK ADDITIONAL MODESTY PANEL SIZE IS 1350 MM (L) X 700 MM (H) MADE BY EXCLUSIVE FROSTY WHITE COLOUR WITH EPIC DESIGN & LOOK.1 MOBILEPEDESTAL (2 DRAWERS + 1 FILING CABINET )SIZE IS 450 MM(L)X 450 MM(D)X 725 MM(H) IN PROVIDED WITH CENTRAL LOCKS FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING & PEDESTALS MOVE ON NYLON CASTORS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST 24 PROVIDING AND SUPPLYING * MEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 580MM(L)X 670MM(D)X1110MM(H) ,*THE CHAIR MADE OF FULL UPHOLSTERY IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : AMREST IS HAVING TWO ADJUSTMENT HEIGHTS (UP & DOWN) .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM. SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 480MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1110MM & MINIMUM HEIGHT IS1010MM* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS . 25 PROVIDING AND SUPPLYING 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION,THREE SEATERTYPE WAITING AREA CHAIR - MATERIAL : STAINLESS STEEL SIZE 1820MM(L)X 690MM(D)X 790MM(H) COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 26 Supplying of Portrait/Landscape Not applicable Fabric Pin Up Notice Boards(Fabric Pin Up Notice Boards 3 X 6 FT GREEN),Specification-Width of Board in mm:900 mm,Colour(Front/ Display layer):Green,Height of Board in mm:1800mm,Rear panel material of Board:Laminated sheet,Overall pinability depth ofBoard in mm:9 millimeter,Core material thickness inmm:9 millimeter 27 PROVIDING AND SUPPLYING COLLEGE DESK TOMKINS MATERIAL : PRELAMINATED PARTICLE BOARD WITH M.S BASE UNIT SIZE : 590 MM(L) X 1090 MM(D) X 830 MM(H) PER SEAT SIZE- 590 MM X 375 MM X 450 MM/ONE SEATER DESK SIZE :1090 MM(L) X830 MM(H) COLOUR : AVAILABLE ON REQUEST/FINISH : EPOXY POLYESTER ,* PROVIDING & SUPPLYING TWO SEATER COLLEGE DESK TOMKINS COMBINATION OF THREE ROWS FIRST , MIDDLE AND LAST SCRATCHPROOF EASY WIPE TOP / DURABLE ,STRONG & SAFE,UNDERSTRACTURE MADE OF MAIN FRAME MDE OF CRCA POWDER COATED IS GRAD:304 M.S BLACK POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) EPOXY POLYESTER COATING.* TABLE TOP & MODESTY PANNEL MADE IN 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS.CHAIR WITH GAS LIFT ,A). BACK FRAME: 1.2MM COLD ROLLED STEEL/B). BACK BOARD: 10MM PLYWOOD, NO CUSHION C). SEAT BOARD: 15MM PLYWOOD, NO CUSHION/D). TIP-UP SYSTEM: SPRING MECHANISM E). 2. LEG: COLD-ROLLED STEEL, FIXING ON THE FLOOR BY SCREWS, 80 X 35 X 1.5MM THICK OVAL TUBE, BLACK POWDER SPRAYING.* THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST 28 Supplying of Material & Subtype Engineered Wood Table Top Material Engineered Wood Finish Matte Colour & Colour Family Brown - Classic Walnut Dimension (W)550mm X (D)550mm X (H)1200mm Size Compact Assembly Type Knock Down (Obelisk), 29 Suppling of Writing Board ( 4x10 Non-Magnetic) of material Top Surface materials (Used for white boardsurface)-Porcelain,Top surface material thickness -0.7 mm to 0.8 mm,Frame material -Anodized extruded aluminum alloy hollow section conforming to IS 733 (With latest amendment),Frame wall thickness-1.2 mm,Frame section front -20 mm,Frame section side -16 mm,Core material-MDF board grade-I conforming to IS 12406 (with latest amendment),Core material thickness -9 mm as per Department incharge 30 Supplying of 14 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 8850 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 8850 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST, * CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST, 31 Supplying of * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : MARVEL/HB/ECO ,* ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1380MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM . * ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) , SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1380MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 32 Supplying ofMEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1125MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM .* ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) ,SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1125MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 33 Supplying of Tte Mild Steel Pipe of diameter 19 mm and wall thickness 16gauge. Classroom Chairs, tte,Thickness-2mm to 45mm,Material-Mild Steel Weight-Depends upon the size,Outside Diameter-0.80 Inch to 36 Inch 34 Supplying of 1-Bay Sprocket Chain Drive Mechanism MobileStorage Compactors,Material-Mild Steel Product Type-1 Bay,Height -7 ft,Storage Capacity-50-80 kg Usage/Application office, Home, Hospital, Store Room, Warehouse 35 Supplying of -- Movable File StorageSystem (Compactor) 1-Bay Mechnized Drive Type(COMPACTOR 2 ( 04 BODY)) 36 Supplying of Methodex MS1-6MCMETHODEX(Methodex MS1-6MC),Accutec Mobile Storage System,Material SS,Usage/Application-Warehouse Height-8-10 Feet,No of Layers-5 37 Supplying of : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 38 Supplying of : PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 39 Supplying of* HIGH BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 590MM(L)X 505MM(D)X1280MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : KNEE TILT MECHANISM . * ONLY SEAT SIZE IS 505MM(L)X 505MM(D)X610MM(H) & THE BACK SIZE IS 590MM(L)X 710MM(H) SEAT MAXIMUM HEIGHT IS 610MM & MINIMUM HEIGHT IS 510MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1280MM & MINIMUM HEIGHT IS1180MM * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650 MM CHROME BASE WITH SMOOTH CASTORS . 40 Supplying of* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 570MM(L)X 500MM(D)X940MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED. * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 570MM(L)X 500MM(D)X475MM(H) SEAT HEIGHT IS @ 940MM & BACK HEIGHT IS @ 475MM . * FIXED CANTILEVER CHAIR . * BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 41 * SUPPLYING AND PLACING FIVE SEATER (3+1+1) EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 3 SEATER- 1905MM(L) X890MM(D)X 870MM(H)SOFA SIZE IS 1 SEATER -(W)960mm X (D)890mm X (H)870mm ,WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR, IT COMPLEMENTS THE MODISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. 42 Supplying of Material & Subtype Solid Wood - Beech Wood Table Top Material Clear Glass,Frame Material Solid Wood Leg Material Solid Wood,Finish Matte Colour & Colour Family Brown - Walnut,Dimension (W)1130mm X (D)630mm X (H)410mm,Number Of Recliners 1 Number Of Reclining Positions 3,Size Standard (HOPPER/CT), 43 Supplying of6 SEATER Rectangular MEETING TABLE DURIAN MODEL SMART/CON/6FT MADE OF PRELAMINATED PARTICLE BOARD WITHSLANTLEGS50X50 MM MS UNDERSTRUCTURE IN POWDER COATING 2TOP MADE OF25MMTHICK PRELAMINATED PARTICLE BOARD IN FROSTY WHITE COLOR WITH MAIN TABLE SIZE1800MM(L)X 1050MM(D)X 750MM(H) (SMART/CON/6FT/A), 44 SUPPLYING & PROVIDING CAFETERIA CHAIR SIZE IS 381MM(L)X 419MM(D)X839MM(H) A COMBINATION OF SYNTHETIC FIBER WITH STAINLESS STEEL MAKE THE PRODUCTS UTILE AND A DELIGHT, THE COMPLETE STRUCTURE SHALL BE MADE UP OF 20% GLASS FILLED BLOW MOLDED HIGH-DENSITY POLYETHYLENE ANDIS,THE FRAME STRUCTURE SHALL BE SUPPORTED BY ( 2 STRAIGHT + 2 SLANT ) FOUR LEGS.THE TUBULAR WELDED FRAME IS MADE FROM DIA2.22 +/- 0.03CMX 0.12+/- 0.0128 CM AND 3.5+/- 0.03 CM X 0.12+/- 0.0128 AM STAINLESS STEEL 202 GRADE TUBE & THE TUBE ARE BUFF POLISHED TO GIVE SHINY FINISH.SEAT AND IN BACK GIVEN HANDLE TO HOLDARE MADE OF INJECTION MOULDED HIGH IMPACT STRENGTH POLYPROPYLENE POLYMER COMPOUND WITH INDOOR GRADE UV RESISTANCE AND PRESSED FITTED WITH LEGS.THE CHAIR IS EASY TO STORE WHEN NOT IN USE, SINCE YOU CAN STACK UP TO 6 CHAIRS ON TOP OF EACH OTHER. (COCO/SUR). 45 SUPPLING OF METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1830MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET.HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, FITTED WITH MS BODY LOCK & HANDLE. WITH 2 NUMBERS OF GLASS DOOR SHUTTERS , THE GLASS USED SHALL BE 4MM THICK CLEAR. UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 30 KG MAXIMUM.EACHRACKSHALLBEPROVIDEDWITHSTIFFENERATBOTTOMFOR STRENGTH.THE ENTIREBODYPANELAND SHELF SHALLBEMADEOF HIGHYIELD STRENGTH,THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY 46 SUPPLING OF DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 750MM(D)X 750MM(H) 36MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITHWENGE FINISH, USING HOT MELT GLUE TO FIXING 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 25MM THICK.*PROVISION OF SIDE RUNNER OF SIZE IS 750MM(L)X 450MM(D)X 760MM(H) ,( CONSTRUCTION IS FROM RIGHT SIDE OF SIDE UNIT TOP BASED ON FIXED PEDESTAL WITH SS STUD OF GRADE 304, ON TABLE TOP PVC GROMENT HOLEFOR WIRE MANAGEMENT .*FIXED PEDESTAL OF SIZE450MM(L)X 450MM(D)X 650MM(H) PER DRAWER HEIGHT IS @ 136MM, FILLING DRAWER HEIGHT IS @ 300MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 47 SUPPLING OF* CANTILEVER CHAIR SKU : 70011/CN/A, * ALL OVER SIZE IS : 590MM(L)X 490MM(D)X980MM(H) , *THE CHAIR MADE OF FULL FABRIC INBLACK COLOUR . IT WILL COMES INFINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32(±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* BASE : M.S POWDER COATED TUBLAR FRAME OF CATILEVER TYPE . THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. 48 SUPPLING OF OFFICE DESKDESK STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL 18MADE OF MM THICK . *PROVISION OF SIDE UNIT OF SIZE IS 900MM(L)X 450MM(D)X 750MM(H) ,(COMBINATION CONSTRUCTION WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, LEFT SIDE TABLE TOP BASED ON A 18MM THICK SIDE PANNEL ENGINEERED WOOD & FROM RIGHT SIDE UNIT HAVE 2 SLIDING DOOR + 1 FIXED SHELVE . *SIDE UNIT SIZE900MM(L)X 450MM(D)X 750MM(H), IN PROVIDED WITH LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF SIDE UNIT IS 18MM THICK ALONG WITH FECIA OF SLIDDING SHUTTERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST . 49 SUPPLING OF * FIX CANTILEVER ,* ALL OVER SIZE IS : 595MM(L)X 510MM(D)X875MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM .* BASE : 4 LEGS METAL POWDER COATED* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 50 * PROVIDING AND SUPPLYING PENTA WORKSTATIONLSHAPE SINGLE SEATER UNIT NON SHARING IN COMPLETELY KNOCK DOWN CONDITIONS WITH AN OVERALL SIZE 1500MM(L)X 600MM(D)X 1200MM(H) THAT IS TO BE ASSEMBLED AT SITE. THE WORKTOPSHALLHAVETHESIZE1490MM-1490MM (L) x 592(D) MADEUPOF25MMTHICKPRE- LAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST . OF IS LEVEL WITH APPROVED LAMINATE AND FINISH AS PER APPROVED SHADE. * THE PROFILE OF THE TOP SHALL BE IN RECTANGLE SHAPE AND THE EDGES SHALL BE SEALEDWITH 2MM THICK THIN STRIP OF IMPERMEABLEPVCTHAT IS CUT TO FIT THE SIZE OF BOARD PANEL AND DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THE TOP TRIM, TOP BAR, MID BAR, VERTICAL BAR, RACEWAY, SKIRTING SHALL BE MADE UP OF ALUMINIUM EXTRUSIONS (PRE-TREATED)AND DULY POWDER COATED WITH POLYESTER POWDER COATING 40P-60PTHICK . THE TRIMS SHALL HAVE THE SIZE 67MM X 19MM WITH 1.5MMTHICKCOVERED WITH DIE CAST END CAPS ON JOINTS 2 WAYS,3 WAYS& 4 WAYS(L-COVERFORCORNER,T-COVERFORMIDDLESECTIONWHEREVER REQUIRED).THEALUMINIUMRACEWAYSHALLBESITUATEDBELOWTHEWORKTOPWITHAN OVERALLSIZE149MM(H)X60MM(D)WITH1.4MMCOVERTHICKNESSAND2MMBACK THICKNESS AS PER REQUIREMENT OF INLAYING THE ELECTRICAL MANAGEMENT AND CARRYING THE WIRE HORIZONTALLY. *THE EXPOSED VERTICAL AND HORIZONTALFACES OF THE FRAMES SHALL BE SNAPFITTEDWITHTRIMS.THERESHALLBESOFT-BOARD(WITHFABRIC)ANDMARKERBOARD PROVIDED AT FRONT OF THE USER. LAMINATED TOP TILE AND BOTTOM TILE SHALL BE SITUATED AT BOTH SIDES OF THE USER AND BELOW THE WORK TOP RESPECTIVELY. THE PARTITION SHALL HAVE CONCEALED WIRE MANAGEMENT CAPABILITIES AND SHOULD BE ENGAGED FOR RESPONSIVE AND SAFE OPERATIONSOF POWER,TELECOMMUNICATIONSANDDATA(LAN)AND HASSEPARATE COMPONENTS FOR ELECTRICAL, DATA AND TELEPHONE CABLES HAVING ADEQUATE CAPABILITY OF BOTH THE VERTICAL AND HORIZONTAL WIRE MOVEMENTS.SLOTS/CUT-OUTS SHOULD BE GIVEN ON RACEWAYSTOFIXALLELECTRICALANDDATAPOINTS.SINGLESIDEDPVCWIRE MANAGER SHOULDBE ENCLOSEDATTABLETOP.ADJUSTABLE LEVELLERSHOE SHALL BE PROVIDED AT BOTTOM OF THE PARTITION TO AVOID SCRATCHESON THE FLOOR.PARTICLE BOARD OF GRADE II OFISLEVEL. * THREE LAYER PRELAMINATED PARTICLES BOARD (WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST .* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 51 PROVIDING & SUPPLYINGFIXING OF TWO SEATER SCHOOL DESK WITH SHELF/STORAGE UNDER DESK WHICH ONE MADE BY CAST IRON,DESK TOP MADE BY 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST,TWO SEATER CLASSROOM DESK CUM BENCH, TOTAL SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) DESK SIZE : 1050MM (W) X 400MM (D) X 760MM (H) BENCH SIZE : 1050MM (W) X 310MM (D) X 390 / 760MM (H) BACK SIZE : 1050MM (W) X 150 MM (H),TABLE TOP SHALL BE POLYPROPYLENE CO POLYMER (PPCP).BANDING UNDER STRUCTURE-BLACK 9005 ERW PIPE (AS PER IS:7138) : 25X25X1.2MM SQUARE MS PIPE, OF THICKNESS 1.2MM IN BLACK EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) AT BASE WITH PLASTIC CAPS MADE OF PP COPOLYMER (3530 GRADE) ARE ALSO PROVIDED ON THE REAR FRAMES ADDING MORE AESTHETIC VALUE TO THE PRODUCT. * ADDITIONAL HORIZONTAL SUPPORTS OF M.S. C SECTIONS OF 1.5MM THICK ARE PROVIDED BELOW THE DESK & SEAT.SHELF: 0.8MM THICK POWDER COATED M.S. SHEET BELOW THE DESK & HOOKS ON EITHER SIDE OF DESK IN M.S. ROD OF DIA 6MM.TOP,SEAT AND BACK PANEL: 18MM THICK PRE LAMINATED BOARD WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST.* 52 Suplying of Laboratory Steel Furniture Sidebench with rack and table top of specification,Size of side benches/Island benches (LxWxH):1800 mm X 1800 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 53 Supplying of Laboratory Steel Furniture Island bench with table top Size of side benches/Island benches (LxWxH):900 mm X 1500 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 54 Supplying ofPowder coated Round Classroom Stools Load of 50 Kg of stool of specification:Height Adjustment: Without Hydraulic,Frame and support made of CHROME PLATED MS TUBES,Chair Type:Non Revolving,Type of seating:Only seat,Pedestal base :Aluminium Die Cast 55 Suppling of Over Head Storage delite hi-tech of specification Material of Construction:ISI Marked, three layer Prelaminated particle Board conforming to Grade II Type III of IS 12823/2013 laminated with 0.6-0.8 mm thick lamination conforming to IS 2046/1995 and balancing lamination of 0.5 mm thick on the back side,Number of Shelves (Nos):2 Number of Doors (Nos) -2 ,Height in mm (±10 mm)-750,Depth in mm (±5 mm)-450 56 Suppling ofStainless Steel Name Plates, Monograms, Labels, As per BHEL ,Specifications :Stainless Steel Name Plates, Monograms, Labels, 57 Suppling of Aquaguard RO & UV both SS304 Drinking Water Coolers With Built In Water Purifiction System AquaguardR 58 Suppling ofStainless Steel External Branding Signage Boards, Size 22X6 Feet,Signage Printing-Single size vinyl print ,Material -Stainless steel ,Coating: Gloss or matte,Fabrication Specs-framing with one coat of red oxide & 2 coats of oil paint to avoid rusting 59 PROVIDING & SUPPLYING DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2100MM(L)X 900MM(D)X 750MM(H) 50MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH CLASSIC WENGE BROWN FINISH 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 50MM THICK* PROVISION OF SIDE RUNNER OF SIZE IS 1200MM(L)X 400MM(D)X 760MM(H) ,(CCOMBINATION ONSTRUCTION BELOW TABLE TOP 1 KEY BOARD TRAY IN PVC WITH TELESCOPIC CHANNEL ON RIGHT SIDE IS MOVABLESIDE RUNNERHAVING 1 OPENABLE DOOR WITH 1 FIXED SHELVE, 1 OPEN BOX WITH 1 FIXED SHELVE UPPER SHELVE HEIGHT IS @ 320MM BELOW SHELVE HEIGHT IS @324@ + 3 DRAWERS (2 EQUAL DRAWERS + 1 FILLING DRAWER)PER DRAWER HEIGHT IS @ 184MM, FILLING DRAWER HEIGHT IS @ 303MM HAVE CENTRAL LOCKAND HANDLES WITH CASTORS .* MOBILE PEDESTAL OF SIZE400MM(L)X 530MM(D)X 671MM(H) ,PER DRAWER HEIGHT IS @ 186MM, FILLING DRAWER HEIGHT IS @ 195MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 60 PROVIDING & SUPPLYING* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 610MM(L)X 505MM(D)X990MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORTbackrest support* ONLY SEAT SIZE IS 610MM(L)X 505MM(D)X485MM(H) & THE BACK SIZE IS 610MM(L)X 540MM(H) ,* BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 61 PROVIDING & SUPPLYING OFFICE DESK STRUCTURE OF RECTANGULAR SHAPE .PRIMARY WORK SURFACE OVER ALL SIZE IS 1200MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF 25MM THICK PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL MADE OF 18MM THICK, WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP.*CONSTRUCTION RIGHT SIDE OF TABLE TOP IS BASED ON A FIXED PEDESTAL3 DRAWERS & FROM LEFT SIDE OF TABLE TOP IS BASED ON 18MM THK ENGINEERED WOOD PVC EDGE BANDING PEDESTAL BACK,TOP,BOTTOM & DRAWERS ARE MADE OF 18MM THICK WITH 1 CPU TROLLY MADE IN BLACK METAL POWDER COATED.*FIXED PEDESTAL:L:410MM(L)X 580MM(D)X 750MM(H) ,IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823. 62 Suppling of Material & Subtype Solid Wood - Beech Wood Table Top Material Solid Wood,Leg Material Solid Wood Finish Glossy Colour & Colour Family Brown - Walnut Dimension (W)680mm X (D)530mm X (H)450mm Table Top Thickness 8mm,Size Compact, 63 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 838MM(L)X 305MM(D)X 1676MM(H) STEEL BOOKCASE HAVING 4 DOORS AND K. TYPE OF LOCK: THREE WAYBOLTING DEVICE CONTROLLED BY LOCK, THICKNESS OF MS SHEET USED FOR SHUTTER: 0.7 MM, THICKNESS OF MS SHEET USED FOR SHELF: 0.7 MM, THICKNESS OF MS SHEET USED FOR TOP,BOTTOM, BACK AND SIDES: 0.7 MM, MATERIAL OF HANDLE: CAST BRASS, THICKNESS OF TRANSPARENT GLASS IN SHUTTERS: 4.0 MM, THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 60-80 MICRONIN COLOR GREY-LIGHT GREY. 64 Suppling of 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION DURIAN,THREE SEATERTYPE WAITING AREA CHAIR -NIXON/SS/3 MATERIAL : STAINLESS STEEL,SIZE 1820MM(L)X 690MM(D)X 790MM(H)COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 65 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE) 6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY. 66 PROVIDING & SUPPLYING * FIX CANTILEVER CHAIR PROVIDING & SUPPLYING* ALL OVER SIZE IS : 590MM(L)X 490MM(D)X940MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED.* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 35 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 590MM(L)X 490MM(D)X450MM(H) SEAT HEIGHT IS @ 450MM .* BASE : 2 CHROME LEGS + BACK SIDE BOTTOM CHROME IN METAL . 67 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM). 68 SUPPLYING AND PLACING30 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated ParticleBoards Of Grade-II Type-II Of IS:12823/Latest (for 14 seater rate devided by 30X24} 69 SUPPLYING AND PLACING PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OFSUPPLYING AND PLACING PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK .* PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 70 SUPPLYING AND PLACING* HIGH BACK 360° DEGRE REVOLVINGCHAIR * ALL OVER SIZE IS : 673MM(L)X 508MM(D)X1270MM(H) , *THE CHAIR MADE OF FULL NATURAL LEATHER IN BROWN COLOUR . IT WILL COMES IN MATTE FINSIH EXTRA PADDED DESIGNED FOR MORE CONFIRMT AT WORKPLACE IN CONTEMPORARY STYLE . DETAILS :* ARMS : WOODEN ARMS WITH LETHER PADDING ARM REST ARE FITTED TO THE SEAT & BACK.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT . * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK .BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : MULTI-LOCKING KNEE TILT MECHANISM .SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 500MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1270MM & MINIMUM HEIGHT IS 1219MM* GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : THE PRONG (BASE) IS MADE OF SOILD WOOD WITH POLISHEDAND FITTED WITH 5 NUMBERS. TWIN WHEEL CASTORS (CASTOR WHEEL DIA. 50MM) & 700MM PITCH CENTER DIA (740MM WITH CASTORS) . 71 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood Upholstery Material Leather,Seat Material Leather Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)1140mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 1 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 72 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood,Upholstery Material Leather,Seat Material Leather,Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)2130mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 3 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 73 SUPPLYING AND PLACING Rectangular CENTRE TABLE with Marble Top of 1219mmX711mm,(DAISY/CT (W)1300mm X (D)650mm X (H)450mm),Specifications:Number of storage under top No storage,Top material,Tempered glass,Frame material No frames,Dimension of Top (Length X Breadth, or Diameter) ±20mm,762mmX457mm,Height of centre table ±10mm,410,millimeter,Thickness of top material (+/-2 mm)- 8 millimeterThickness of frame material (+/- 1 mm)-10 millimeter 74 SUPPLYING AND PLACING 14 SEATER oval MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II 75 SUPPLYING AND PLACING 6 Seater Sofa Material & Subtype-Premium Leatherette,Frame Material Solid Wood,Upholstery Material Premium Leatherette,Filling Material Foam,Silicone Fiber,Seat Material Premium Leatherette-Leg Material Solid Wood,Finish Matte,Colour & Colour Family Brown -Coffee Brown Dimension (W)4865mm X (D)960mm X (H)820mm,Seating -Capacity 3 Seater,seating Height 475mm,Size Standard 76 SUPPLYING AND PLACING9 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 4650 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 4650 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST,* CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATESt. 77 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM) 78 SUPPLYING AND PLACING Wooden Acoustic Wall Cladding/Panelling- Providing and fixing in position wood wall paneling of width 128mm, thickness of 16mm and length 2440 mm made up of high density fiber board with minimum density of 800 Kg/m3 substrate with a laminated facing/wood veneer as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 2mm groove & 14mm pitch. The panels shall have fire resistance of Class 1, BS 476 part 7. The edges of the panels shall be tongued-and-grooved to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick glass wool layer as directed by the Engineer-in-Charge. The panel shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install Gel stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall horizontalty using screws and plugs at spacing of 600mm centre-to-centre, Screw the aluminium channel (keel) vertically on channeled G.I stud 600mm 79 SUPPLYING AND PLACINGBlackout roller blind,Specifications-Mounting arrangement profile systems – clicked on hidden mounting clipsTypes of roller blind,Blackout roller blind-Shading solutionSingle roller blind – utilise one layer of fabric (called outer layer Operating mechanism-Side winders (that lock the manually adjustable blinds at different levels with the internal ratchet and tension adjusted by spring inside the tube) 80 Providing and Fixingof Drawers in Brown Finish ,Specification-Material : High QualityParticle board Dimensions (In Centimeters)-H 91 x W 90 x D 44 Dimensions (in Inches)-H 36 x W 35.5 x D 17.5 Primary Material-Engineered Wood as per Engineer incharge 81 Providing and FixingSTAGE - Providing & fixing raised stepped floor (Stage) Consisting ofMS Tabular frame work ofPipe Section (HOT ROLLED/COLD ROLLED) size 50mmx 50mmx2.0mm.tk. duly Painted with one coat of Red Oxide steel Primer, fabricated in module of 600 x 600 mm frame gid (as per Design or as instructed) with support of same section Legs /frame fixed on existing floor from base and raised at height minimum 150mm to max 200mm as required, from Existing floor. Vc providing and fixing 18mm thick heavy duty high density (1450 kg/cum) cement fiber Board fixed by SS. Screw on Horizontal & Vertical Surface on Existing Framework with one coated cement primer on Board and covering Board from top and sides by 2mm thick Vinyl flooring of approved make,colour and texture to be layed and fixed on sub floor smoothly finished and levelled by recommended adhesive cutting fixing and including covered raised portion of Board from all sides etc. complete,suitable for use up to the satisfaction of Engineer- in-charge.Design as approved by Engineer-In-charge. Base ofthe Vertical Legs of M.S. Frame (COLD ROLLED/HOT ROLLED) 82 Providing, fixing & installation MICROPHONE:-Flat frequency response across the vocal range for uncolored sound interchangeable cardioid, supercardioid, and omnidirec- tional cartridges that provide choices for applications Sleek, low-profile design for unobtrusive appearance Balanced transformerless output for increased immunity to noise over long cable runs-Compact Cinema Surround Speaker for Digital Applications:- Frequency range: 50 Hz to 20 kHz • High sensitivity: 91 dB SPL, IW @ 1m (3.3 ft) High power handling capability: 150 watts, continuous pink noise Internal Thermomaster• technology allows for unprecedented high frequency power in a compact, molded enclosure Convenient mounting design supports JBL QuickMountre, OmniMount• or APC multimount brackets Special cabinet shape incorporates 20• angled front baffle SMPTE/lS02969 Curve X high frequency de-emphasisMixer 8 input mono mixer XLR input switchable between mic and line level +/- 15dB gain trim control per input Input 1 is switchable to be pre/post master 24VDC or mains power operation Optional remote VCA/Tone generator/ Muting boards available • Whisper quiet operation 83 Supply, Installation, Testing and commissioning of microphone Delegate unit. 84 Supply, Installation, Testing and commissioning of microphone Chaiman unit, 85 Supply , Installation , testing and commissioning of Factory made 1.4HDMl Cable along with connector (15mtr length) 86 Supply , Installation , testing and commissioning of Factory made VGA along with Connectors.(15mtr length) 87 Supply , Installation , testing and commissioning of Factory made RCA along with Connectors.(15mtr length) 88 Supply , Installation , testing and commissioning 40W power Amplifier of following features:- Rated output wattage - 240W, amplifier output IOOV, 70V and 4-16 ohms transformer isolated speaker outputs, Supply input 0.775 v (OdB) unbalanced, 10k ohms, XLR and phone jack frequency 89 Supply , Installation , testing and commissioning10W wall mount speaker- Supplying, installation, testing and commissioning of 240W power amplifier with following features:- Rated output wattage- 240W, amplifier output 100V, 70V and 4-16 ohms transformer isolated speaker output, Supply input 0.775 v (0 db) unbalanced, 10k ohms, ZLR and phone jack frequency response 50 - 18000 Hz, +/- 1.5 dB, S/N ratio > 105 dB. 90 Supply , Installation , testing and commissioningCONFERENCE CONTROL UNIT, line Output 1 17.5V DC/3a Max.; -34dBV (20mV), line Output 2 17.5V DC/3a Max.; -34dBV (20mV), power Output 50w rMS at 2% THD, 90w Max. inputs 3xMic 0.65mV/4.7kQ Ixaux IOOmV/470kQ Frequency response 60-14,000Hz (± 3dB) 91 Supplying of Material & Subtype Engineered Wood Finish Matte,Colour & Colour Family Brown - Wenge Dimension (W)800mm X (D)384mm X (H)1970mm Size Standard,Style Contemporary,Assembly Type Knock Down 92 Supplying of Powder Coated Extruded Aluminium Sections Hybrid panel based system (combination of sliding & snap fit tiles) Modular Work Stations 93 Supplying of11 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823 94 SUPPLYING AND PLACINGSLOTED ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE)6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY, 95 SUPPLYING AND PLACING : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 96 Providing and fixing e Slimline Tower AC (2 Ton White),Availability of BIS/ISI Mark Certification for Split AC Floor type-Yes,Technology of air conditioner,Non Inverter AC-Nominal Marketing capacity as per BEE Star Rating Label (hint: 1 Ton = 3000 Kcal/Hr, Tolerance +/- 10%) (in Ton)-3 BEE Star rating of the product (Central Ministries/Departments while procuring shall ensure that the items carry 5 star (under normal conditions where annual usages is expected to be more than 1000 hrs),3 Star (where usage is Limited)or higher Star R NA- Star rating for the capacity of >10,465 Watts (>9,000 kcal/hour) 97 Providing & Fixing 2.0 mm thick homogenous single layered vinyl flooring. The flooring shall be laid in manner to provide comfortable and jerk free surfaces including material, adhesive, scaffloding and lead and lift at all floor level etc. complete as per direction and approval of Engineer-in-charge. 98 Providing & Fixing Wiring for Primary Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insuate copperconductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point With 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Switch with Front plate and metal Box with all Accessroies for users. 99 Providing & Fixing Wiring for Secondry Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with all Accessories. 100 Providing & Fixing Wiring for Primary Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 101 Providing & Fixing Wiring for Secondry Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 102 Wiring for Primary Power point 6/16 Amp Switch-Socket Outlet with 4 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq-mm FR PVC insulated copper conductor Wire. Providing and fixing 1 nos 6/16A Socket controlled by 1 nos 16A switch with front plate and metal box with allAccessories. 103 Providing & Fixing Standing Bathtubs Specifications:Size:1690x800x445/565mm Free Standing Bath Tub with Over Flow & Drain 104 Providing & Fixing Corazzin Garden Patio Seating Chair and Table Set Outdoor Balcony Garden Coffee Table Set Furniture with 1 Table and 4 Chairs Set (Black) 105 Providing & Fixing Reliable Drapes Cotton Plain Door Curtains Reliable Drapes,Cotton GSM Quality-220,Lining included-No, Pack of-1,Length (Ft)-8.5-9,Width (Ft)-3-3.5 106 Providing MattressDimension 1981 mm X 1829 mm,Thickness of Core Layer (Height of Spring) 200 mm,Thickness of Felt (±1 mm) for Bonnell Spring 12 mm,Thickness of Top Layer (±2 mm)-50 mm Thickness of Bottom Layer (±2 mm)50 mm,Type of Spring in Core Layer Bonnell Spring (with cotton felt),Material of Top Layer Visco Elastic PU Foam (Memory Foam) 107 ProvidingCotton Pillow 33 cm x 56 cm (COTTON PILLOW)of Specification-BIS Marking ( For Body Casing fabric )-No Logo Marking-No,type of Logo,Stitched ( Patch Logo ),Agree to provide 108 Providing240 centimeter x C1112M 135 centimeter (L x W) Printed Bed Sheets(BED SHEET ):Technical Specification of the Product-Sheeting, Tickings and Bedsheets (V2) as per IS 175 BIS Certifcation-No,VarietyVariety - 2,Process of colouring Dyed,Matching Pillow cover 109 Providing 25 liter 3 Star Water Heater,25 Ltr 5 Star Water HeaterCapacity litres (Litres),BEE Star Rating (Central Ministries/ Departments while procuring shall ensure that the items carry 5 star or higher Star Rating of BEE)-3,Availability of Type Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification-No,Material of Inner Container Vitreous enamelled inner tank conforming to IS-13273 110 Providing Wall Mount Mesh Filter T-Shapped Kitchen-Chimney Material of Blower Body-Aluminium,Material of Blower Blade Aluminium,Material of Exhaust pipe-pvc,Filter Material,Stainless Steel,ShapeT-Shapped,Filter Type,Mesh Filter,Control Panel Type Soft Touch,Mount Type,Wall Mount 111 Providing Potable Water Purification System With Inbuilt Water Cooler. RO UV Aquaguard(Hot & Cold uv+ ro) Specifications-Flow rate (Litres/hr.)-12,Cold water storage capacity (Litres)-11 liter,Cooling capacity (litres/hr.)-4,Hot water storage capacity (Litres)-1.5 liter,Heating capacity (litres/hr.)-1.5,Cooling power consumption (Watts)-230,Heating power consumption (Watts)-550. 112 Providing300 L 3 Star Frost Free Double Door Refrigerator, of specification Cooling type:Frost free,Exterior body built:steel,Shelf material -Toughened glass,Voltage Range-160-300V,frequency-50 Hz 113 Providing900 mm wide 2000 mm high Metal Shelving Racks,Specifications :Type-OPEN TYPE Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted)-4,Shelves Material-0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513,Depth in mm (±5 mm)-400,Width in mm (±5 mm)-900,Height in mm (±5 mm) 2000 114 Providing and fixing Drawers of Specification of Dimension (in cm)-H91 X W90 X D44in Brown Finish,primary material-Engineered wood,Weight 49.45kg 115 Providing and fixingDressing Table With cupboard and open shelves-Design of Dressing table With drawers,cupboard and open shelvesBase of dressing table Rectangular wooden frame Number of side mirror-1 number, Material specification-Prelaminated particle board of grade II type III of IS 12823/Latest.both side laminated. outer side laminated with shade matching with top shade and fascia shade and having balancing laminate of 0.5mm thick on other side Material thickness of complete body, Fascia and drawer/cupboard-19 millimeter,Material thickness for back, partition and drawer /cupboard bottom ± 2mm,19 millimeter 116 Providing and fixing Material & Subtype Solid Wood - Rubber Wood Table Top Material Solid Wood-Frame Material Solid Wood,Finish Glossy,Colour & Colour Family Brown - Walnut Dimension Of Table (W) 600mm X (D) 600 X (H) 610mm Dimension Of Chair (W)640mm X (D)530mm X (H)560mm Size Standard 117 Providing and fixing Wooden Double Bed Storage Box Opening From Material of Mattresses Panel-Other wood, Material of Bottom Panel of Storage Box-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Front, Back and side Panels Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Headrest Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Legrest-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest,Type of Bed-Wooden Double Bed Material of Bed Frame-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest 118 Providing and fixing 1 Seater Sofa With Leatherite Cover Sofa Set is Foldable to use as bed-No Backrest Cushion Material-Foam,density of Cushion of Backrest Material (Kg/Cubic M)-40 Covering Material for Seat and Backrest Fabric Frame Structure Material and size (±1 mm) Any other wood of minimum 25 mm thickness Seat Cushion MaterialFoam 119 Providing and fixing 8 SEATER Rectangular MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823/(Elanor Marble 8 Seater Dining Set) 120 Providing and fixing MODULAR TABLE L X D & H 2000 millimeter X 450 millimeter 700 millimeter (Alice TV Unit marble),Sprcification-Mode of Supply of modular table Knocked Down to be assembled at consignee site by the Seller Storage Provided one side,Number of storage unit-triple storage,Table Top material and thickness ±3mm-25mm thickness three layer pre-laminated Particle boards (Wood Product) of grade II Type II of IS 12823 Latest Gable end and modesty panel material and thickness-18 mm thickness three layers pre-laminated Particle boards (Wood Product) of grade II Type III of IS 12823 Latest 121 Supplying of Library Management Department. and NDL Softwares,Server Machines, Air-Condition Systems,Xerox Machines,Lamination Machines, CONNECTION)Binding Machines,Furniture/Furnishing. Computers, Printers,Computer System(with Internet Connection) 122 Supplying of Printer of Specification A Printing Technology Laser-Cartridge Technology,Composite Cartridge,Type of Printing Mono,Paper Size-A4 Print Speed per minutes per Department Incharge 123 Supplying of XEROX Machine(standard company) Type of MachineMultifunction Machine,Print Technology-Laser Type of Printing-Mono,Cartridge Technology Separate Drum and Toner (Dual Component) Platen/Flatbed Size-A3/A4,Paper Size (Original/Image)A3/A3 RAM size (MB)-4096as per Department incharge 124 Supplying of Determination of wavelength of He-Ne Laser light using Grating(Specification- Output Power: up to 15mW, CW - Wavelength: 632.8nm,* Mode Structure: TEM00 (>95%)* Beam size: <= 1mm* Beam Divergence: <= 1.5 mrad* Polarisation: Unpolarised, Vertical Polarisation. complete set up as per Department incharge 125 Supplying of Brewsters Law using spectrometer(Brewsters angle apparatus differ goniometer digital research bench polarizer analyser with rail type bench abron). complete set up as per Department incharge 126 Supplying of Determination of wavelength of Sodium light using Michelson interferometer(Power-3 kW,Usage-Physics Lab,Material-Mild Steel,Power Source,Electric Voltage 240 V). complete set upas per Department incharge 127 Supplying of Determination of wavelength of Sodium light using FabryPerot interferometer complete set up of Specification Flatness of Reflective Mirrors-λ/20 Diameter of Reflective Mirrors-30 mm Reflectance of Mirrors-95% Effective Travel of Preset Micrometer~ 3 mm Min Division Value of Preset Micrometer-0.01 mm Travel of Fine Adjustment of Movable Mirror-1.25 mm Resolution of Fine Adjustment-0.0005 mm Low-Pressure Sodium Lamp-20 W as per Department incharge 128 Supplying of Resolving Power of Telescope complete set up (specification Color-BlackMaterial-Plastic as per Department incharge) 129 Supplying of Resolving Power of Prism(Resolving power of telescope assists the user to know the basic principle of telescope. Fabricated using excellent quality metals, glass and plastic material, it is widely used instrument in scientific lab of colleges and research centers. It is known for accurate calculation and longer service life) complete set up as per Department incharge 130 Supplying of Production and analysis of Polarised light using half and quarter wave plate(Usage/Application Laboratory Voltage-230 V,Color-Black,Material-SS). Complete set up as per Department incharge 131 Supplying ofLogarithmic Amplifier(Built in power supply : +15V & -15V DC,Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet,Weight : 2KGS APPX) complete set up as per Department incharge as per Department incharge 132 Supplying of Zener diode characteristics & voltage stabilizer. Complete-Specification:(Voltage-240 V Frequency-60 Hz,Display Type -Analog)in all respect as per Department incharge 133 Supplying of FET characteristics complete up(Technical specifications-Inbuilt variable, overload & short circuit protected DC regulated power supplies of 0- 5 volt & 0- 15 volt.Voltmeter & ammeter are mounted on the front panel.One FET.Highly insulated front panel .Trainer helps to demonstrate the working principle of FET.Set of required number of patch cords.Multi - colored sockets are used.Housed in an elegant powder coated metal cabinet.Strongly supported by a comprehensive instruction manual complete with theory and operating details.LED indication for supply “ON” to work on 220V AC Mains.) as per Department incharge 134 Supplying of MOSFET characteristics complete set up(Specificaion:Power-AC Mains,Usage/Application-Laboratory Type-Analog,Material-plastic,Power Supply-ac mains, as per Department incharge 135 Supplying of UJT characteristics complete set up(Specification-Usage/Application-laboratory,Type-Analog,Display Type-Analog meters,Power Supply-ac mains)as per Department incharge 136 Supplying of Transistor biasing (CE mode)(Specificaion-Operating Power Supply-220VAC On Board Power Supply 0-1VDC & 0-10VDC Experiment Input & Output Char In CB & CE Mode OF PNP Tr.Meter Type Analog / Digital)set up as per Department incharge 137 Supplying of Characteristics of SCR(SpecificationUsage/Application-laboratory Type-Analog Automation Grade-Manual ,Power Supply-ac mainscomplete set up as per Department incharge 138 Supplying of Basic Logicgates and Universal gates. Operating Supply Voltage 230V,Logic Family-DIGITAL,Number of Inputs per Gate-2,Usage Laboratory,Material-ELECTRONIC Complete set up in all respect as per Department incharge 139 Supplying of Op-amp Integrator &Differentiator. Complete set up in all respect :Product Specification:Type-Analog Material-Metal,Automation Grade=-Manual,Color-black with multicolour PVC front panel,Power Supply-230,Capacity--5,connector Type-patch cord sas per Department incharge 140 Supplying of Half Adder, Full Adder and 4-bit binary Adder. Complete set up in all respect (Product Specification:Type-Digital,Display Type-Digital Interface--NO Material-ABS,Display-Digital,Pulse Generator-50Hz Variable Dc Output-no)as per Department incharge 141 Supplying of G. M. Counter for 6 digits GM counter with built in power supply complete set up(G.M.COUNTER: COMPLETE WITH INBUILT POWER SUPPLY EHT 250-1200v Workable on 220v. 50Hz., Power consumption 8W approx. STOP, START, RESET switches. Counts Capacity : 6 DIGIT COUNTING SYSTEM, Preset time : 3 DIGIT PROGRAMABLE TIMER WITH DIGITAL DISPLAY. 3 ½ Inbuilt Digital Volt Meter for GM TUBE Voltage. G.M.TUBE: END WINDOW G.M.TUBE MOUNTED IN ACRYLIC STAND. WITH ‘LEAD’ AND ‘ALUMINIMUM’ ABSORBENTS, Radioactive Source: ONE RADIOACTIVE SOURCE BETA or GAMMA (in Lead Container and wooden Box) SOURCE, . Dimensions : 460X370X230mm.(Complete instrument is HOUSED in corrugate box with Export Packaging) Wight : Total weight of the Instrument is 5.5kg.) as per Department incharge 142 Supplying of Measurement of Dielectric constants of solid and liquid samples complete set up(It Consists of following partsRF Generator (9-10MHz Approx) Micro Ammeter (Range 0-50mA) Potentiometer for Sensitvity Selection Fixed Capacity (Metal) Variable Gang Capacitor Socket for test Capacitor & Variable Capacitor brought out at front panel One Solid bakelite plate to be insert in gap of test capacitors)as per Department incharge 143 Supplying of Study of Dielectric constants and Curie temperature of ferroelectric ceramics Complete in all respect(Specifications Temperature Range : Ambient to 200°C,Display : 31/2 digit, 7 segment LED with autopolarity & decimal indicationResolution : 0.1°C,Accuracy : ±0.5°C (typical),Stability : ±0.1°C Power : 150W,(ii) Digital Capacitance MeterThis a compact direct reading Instrument for the measurement of capacitance of the sample. Specifications,Range : 50-6000 pf,Resolution : 1pf Display : 3½ digit, 7 segment LED, Typical results obtained with the above set-up are as shown in the graph) as per Department incharge 144 Supplying of Determining Optical constants of a metal by reflection of light Complete in all respect (Specification-Power-AC Mains,Usage/Application-Laboratory,Type-Digital Material-Metal,Automation Grade Manual,Color-White Power Supply-AC Mains,Display Type-Digital) as per Department incharge 145 Supplying of Lattice dynamics kit with frequency meter (Technical Specifications: Audio Oscillator 100 khz,Built in Power Supply and Output Stage to match the Impedance of Simulated Lattice,Lattice DynamicKit consists of Transmission line, which Simulates One-Dimensional Mono-AtomicandDi-atomicLattices,. LCD Based Frequency Counter is Provided on panel to Measure Frequencycomplete set up as per Department incharge 146 Supplying of BCD to seven segments complete set up(Specification:Built in power supply : +5V DC Mains : 230V AC Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX) as per Department incharge 147 Supplying of Monostable Multivibrator using Oscilloscope (CRO) complete set up (Specification:Usage/Application Laboratory Packaging Type-Corrugated Box,Connector-2mm sockets Frequency Range -50Hz) as per Department incharge 148 Supplying of Bistable multivibrator using Oscilloscope(CRO))Technical Specification:(Built in power supply : +12V & -12V DC Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX)complete set up as per Department incharge 149 Supplying of Pulse code modulation and demodulation complete setup (Product Specification,Type Laboratory Trainer Kit Usage/Application-Laboratory,Accuracy-+/- 10%,Frequency-50 Hz Input Voltage-220V,Packaging Type-Corrugated Box,Power Source-ElectricShape-Rectangular,Material-ABS or Metal Cabinet)as per Department incharge 150 Supplying of Addition, Subtraction, Multiplication using 8086 microprocessor(Product Specification,Usage/Application-LaboratoryType-Fully Automatic,Automation Grade-Semi-AutomaticClock Frequency-Yes,Color-Green,Display-Digital Packaging Type-Corrugated Box, Power-200-400 Weight 2 Kg) as per Department incharge 151 Supplying of Thevenin theorem, (THEVENIN’S AND NORTON’S THEOREM APPARATUS,Technical specifications Inbuilt fixed DC regulated power supply of 12 volt. Voltmeter & ammeter are mounted on the front panel. Resistive network is used in the circuit. Circuit diagram is printed on highly insulated front panel . Trainer helps to demonstrate the working principle & verification of Thevenin’s & Norton’s Theorem based on resistive circuit. Student can calculate & measure the value of current & voltage for different load circuits. Calculation of power consumed by the circuit. Facility for connecting external Power Supply. Set of required number of patch cords. Multi - colored test points are provided in the circuit to observe voltages at different points. Housed in an elegant powder coated metal cabinet. Strongly supported by a comprehensive instruction manual complete with theory and operating details. LED indication for supply “ON” to work on 220V AC Mains. Circuit protection through glass fuse)Complete set up as per Department incharge as per Department incharge 152 Supplying of Active filter set up(Product Specification Operating Temperature-0-50,Frequency (Hz) 50,Condition-New Temperature (deg. Celsius)-50,Usage/Application Industrial, Educational, Residential, Commercial) as per Department incharge 153 Supplying of A to D counter type complete set up (Product Description-M-32 AD M-16 AD,Input AD: 1/4 TRS jack and 25 pin D-sub, servo balanced, completely symmetrical audio path, Output AD: 4 x ADAT optical, 1 x MADI optical/coaxial,Dynamic Range AD: 113 dB RMS unweighted, 116 dBA,THD AD: < -110 dB (< 0.00032 %),THD+N AD: < -104 dB (< 0.00063 %) Crosstalk AD: > 130 dB,Input level for 0 dBFS: +24 dBu, +19 dBu, +13 dBu,Frequency response AD, -0.1 dB: 10 Hz - 23.2 kHz (sf 48 kHz),Frequency response AD, -0.5 dB: < 5 Hz - 45 kHz (sf 96 kHz) Frequency response AD, -1 dB: < 5 Hz - 80 kHz (sf 192 kHz) Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz, variable (Sync/WC),Jitter: Typical < 1 ns for internal, Word Clock, ADAT and MADI input Jitter sensitivity: all PLLs operate error-free even at 100 ns,Jitter suppression: > 30 dB (2.4 kHz),Power supply: Internal switching mode PS, 100V - 240V AC, 60 Watt Dimensions: (WxHxD) 483 x 88 x 200 mm)as per Department incharge 154 Supplying of Determination of Plancks constant(1. 1 0-2V D.C. at 20mA Variable Power Supply. 1.2 Digital Panel meter 3½ digits range 2mA. 1.3 Digital Panel meter 3½ digits range 2 volt 02 Lamp House: 100W Bulb with stand 03 Vacuum Type Photo Cell : Mounted in a Iron box. 04 Three different colour optical filters 05 Adequate no. of patch cords stackable 4mm spring loaded plug length 50cm. 06 Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.) as per Department incharge 155 Supplying of Determination of Energy Band Gap using Four Probe method(Product Specification:Type-Energy Band Gap Usage/Application-Laboratory,Connector-4mm Banana Socket Frequency-50Hz) as per Department incharge 156 Supplying of Determination of Hall coefficient and Hall angle in Hall-effect(Product Specification,Display Type-0-20V DC, 0-5 A, digit LED, Primary safety socket,4mm Electro Magnet Coils 500 T, Voltage resolution -0.1V,Current Resolution 0.1 A) as per Department incharge 157 Supplying of Determination of magnetic susceptibility using Guoys method(Usage/Application Physics Laboratory Type Of Instruments-Magnetic Susceptibility Gouys Balance Method Experiment Setup,Power-230V , 50Hz, +-10% Display Type-LED Type) as per Department incharge 158 Supplying of Study of absorption pattern of a given sample using FTIR spectrometer(Product Specification,Detector-High performance pyroelectric infrared detector,Weight-15 kg Software-1,Voltage-100-240V AC,Electronic System-24bit A/D converter at 500KHz, USB 2.0,Wavenumber Range-7800~350 cm-1Power-100-240V AC,50/60Hz,Signal Noise Ratio-30000:1 (resolution@4cm-1 , sample and background scan for 1 min@2100cm-1 ),Light source-Long life, steady state infrared emitter Beam splitter-coated KBr,Resolution-1 cm-1,Dimension-430mm x 360 x200) as per Department incharge 159 Supplying of LCD Projector and smart board (Product Specification,Projection Distance-<1 m Resolution-WXGA,Lamp Life-5000/9000/10000 HOURS Screen Size-100,Display Type-LCD,Dimensions-400X367X149MM Connectivity Type-Dual HDMI, HDMI,Brightness-2000-4000 Lumens Color-White) as per Department incharge 160 Supplying of Desktop(ntel Core I3/ 10th Gen/ 4GB RAM/ 1TB HDD/ DOS/ NO DVD/ 19.5 Inch Monitor/ 1 Year Warranty) as per Department incharge 161 Supplying of Printer(Product Specification,Printer Type-Ink Tank Color Output-Color,Print Speed-22 ppm,Paper Size-A4,Dimension-403 x 369 x 150 mm,Weight -6,Warranty-One Year or 50,000 pages which ever is earlier) as per Department incharge 162 Supplying of Printer (Product Specification Printer Type-Inkjet Color Output-Color | B&W,Print Speed-10,Paper Size-A4,Connectivity-USB,Dimension-377 x348 x179,Weight-3.9 Print Volume-any)as per Department incharge 163 Supplying of XEROX Machine (Product Specification,Functions-Photocopy,Supported Paper Size-A3,Supported OS-Windows 10 Color Output-Black & White,Number Of Trays-1,Item Color-Black & WhitePrint Speed-22 PPM,Weight-40 kg,Print Technology-Laser Input Tray Capacity-350 sheets,Warm-Up Time-5.6 Sec,Duty Cycle-80000 / Month,Resolution-600 x 600 dpi Connectivity-Ethernet & USB,Duplexing-Yes)as per Department incharge 164 Supplying of computer system with internet connection,PC Specifications to be followed :Processor Intel Core i5(10th Gereneration or newer ),RAM-8 GB or Higher HDD:512 GB,SSD,Monitor 24 LCD Monitor .OS:Windows 10 Professional ,Anti virus:User Licence for one year as per Department incharge 165 Supplying of Laptop (with Internet connection),Processor intel Core i5(11th Generation or newer),RAM 8 GB or higher HDD:512 GB,SSD Monitor 14 screen ,OS Windows 10 Professional ,Antivirus :User Licence for one year 166 Supplying of LCD Projector (Specification-Brightness:2000-4000 Lumens,Resolution-FULL HD 1080P,Connectivity Type-Dual HDMI, HDMI Display Type-DLP,Power Supply-100-240V Portable-Yes) as per Department incharge 167 Supplying of Smart Board (Frame Material-Aluminium Usage/Application-School, Education, etc,Effective Touch Area-72 x 48 inch Material-Ceramic Input Method-USB Power Consumption-150 - 220 W,Shape-Rectangular) as per Department incharge 168 Supplying of MS Suite Software(Specification-Microsoft Office Software,Operating System:For Windows,Brand:Microsoft )as per Department incharge 169 Supplying of Adobe Photoshop Software(Specification -Graphic Design and Photo editing,Licence-1 yea) as per Department incharge 170 Supplying of windows10 OS Software(Specification-License Duration-Life Time,Architecture-32/64 Bits,Operating System For WindowsAlso Provides,Windows Operating System,Provide Installation Service-Yes Support 24/7 (Live Rep)) as per Department incharge 171 Supplying of Laptop of 11th Generation intel core i3,1115G4 processor (6 MB Cache up to 4.1GHZ)windows 10 Home Single language English,intel UHD Graphics with shared graphics memory 8GB ,8 GBX1,DDR4,3200 MHZ,512 MB,2 PCLeNVMe Solid state drive pebble (Top colour is pebble colour,Base and palmrest are black colour as per department incharge 172 Supplying of Desktop of 10th Generation intel core i5-10500T (6 CORE,12MB Cache 2.3GHZ to 3.8GHz,35W ),Windows 10 Pro (64 Bit )English,intel integrated graphics),8GB ,1X8 GB,DDR4 non-EC0C Memory,2.5 inch TB 7200 RPM ,SATA Hatd disk drive 5480AJO 23.8 FHD 1920X10080 ips non touch,Antiglare camera,integrated graphics,Bronze 1505w PSU as per department incharge 173 Supplying of Printer (Specification:Item Weight-12 Kg,Package Dimensions-60 x 56.5 x 38 cm,Connectivity Type-Wi-Fi Operating System-Windows)as per department incharge 174 Supplying of Fumehood(Specification:Type-exhaust,LED-Tube fitting,Power-230 volt,Working Top-Granite ,MOC-GI with PU coated Storage includedas per department incharge 175 Supplying of electronic balance(Specification -Usage/Application-Laboratory,Accuracy-0.01%,Calibration-Fully Automatic,Type Of Weighing Scale-Digital,Voltage-110-220 V Mounting Type Desktop) as per department incharge 176 Supplying of Magnetic stirrer Magnetic stirrer Hot plate (Specification-Weight-2.3 kg,Timer -999 minutes,Temp. Accuracy-+-1 Deg.C(<100 Deg.C)+-3 Deg.C(<300 Deg.C),Dimensions LxWxH (mm)-230 x 180 x 120,Max.Temp. (Plate Surface) 300 Deg.C,Power supply-AC 220V / 50 Hz,Top Plate Size 135 x 135 mm,Display-LCD,Max. Volume (ml) 2000 ml,Speed (RPM)-1250 RPM Plate Material Steel per department incharge 177 Supplying of HOT Air oven of made inner material-stainless steel,Outer material -mild steel ,Surface treatement -Powered coated ,Sizes-Different sizes,Gravity conviction type-Double wall.Mechnical conviction -Triple wall as per department incharge 178 Supplying of colourimetry , Ery colour colorimeter industrial and research purpose stability( Product Specification:Material-Aluminium Alloy,Automation Type Automatic,Brand -DD-LAB ,Dimension-210 x 160 x 80 mm,Display Type-Dual Digital DisplayLight Source-Highly Accurate Laser Source,Stability- + 0.02 O.D. Per Hour Volume 1 ml. minimum,Filters layer-Built in 9 Digital filters 30,000 hours Life,Weight-1.5 Kg,Battery Backup-6 V Ni CD Re-chargeable Battery,Detector Silicon Photo-diode,Display Model Absorbance & Wavelength,Filter Wavelength 680 NM Country of Origin Made in India) as per department incharge 179 Supplying UV-Vis Spectrophotometer Fully touch screen portable UV Spectrophotometer shimadzu model name:UV 1900,Brand :shimadzu,Display =fully touch screen,Type-portable,size 450x501x244 as per department incharge 180 Supplying of potentiometer ,Range-0 to 1999.9mv,Resolution-1 mv,Repeatability -1mV,Accuracy +1 mv+ digit,Input impedency-10ohms,operating temperature 10 to 50 degree Celsius,Display 1/2 digit 0.5 seven segment LED Display indication,Power-230V+10,50hZ,Dimensions 76x275x170 mm,weihjt 2 kh as per department incharge 181 Supplying of Conductivity meter,LT 26 Deluxe conductivity meter,Product details:Model no-LT-26,Brand -Labtronics,Usage-Laborataty,Display type 3.5 Digit LEDas per department incharge 182 Supplying of Online COD/BOD Detector analyzer warer quality monitoring probe,Measure range-0-200/0-1000mg/l,Resolution -1 mg/l ,Accuracy +5%F.s ,Under pressure-1 bar,Power supply -12-24V DC ,Temperature range 0-45 degree ,Production leve;-IP68 as per department incharge 183 Supplying of melting point appratus,Temperature renge -2 degree above ,Readability 1 degree ,Display -3 Digit LED,Heating rate control-Electronic,Temperatre sensor PT-100as per department incharge 184 Supplying of Ph meter Labrtonics,Range:0-14pH,Resolution:0.01pH,Accuracy:0.01pH(Relative),Temp comp:Automatic wvith temp probe,Buffer:Manuals with keys as per department incharge 185 Supplying of Spectrum 3 FT-IR Spectrometer,Model no.-LI280127,Wave length -11000-30 cm-1 as per department incharge 186 Supplying of Stopwatch NIVIA 600 plastic(Product Specification:Color-Black,Usage/Application-Sports,Time Display 12/24 hour display for user option,Material-Plastic,Dial Shape-OvalMaximum Counting-23 hours 59 minutes 59 secondsas per department incharge 187 Supplying of Digital Bomb Calometer(Specification-Auto Off Automatic,Frequency-50 Hz,Voltage-230-280 V,Operating Time Per Test 10 minutes,Power Source Electric(Automatic) as per department incharge 188 Supplying of Microprocessor viscometer ,Product details: Measuring range-101x105mpa,,Spindles-4 Spildles,Rotor speed(rpm)-6/12/30/60 rotor speed rpm as per department incharge 189 Supplying of Flame photometer,Product details:Application-Laboratory use,industialuse,,weight 705kg ,Curve fit accuracy,Resolution-0.1ppm/meq as per department incharge 190 Supplying ofwater purification system,Resolution-18.2 M ohm cm at 25 degree C,Weight-19.5kg,Frequency-50-60Hz as per department incharge 191 Supplying of Refrigerator of 7.5kg fully Automatic Top Load washing machine (Hard water wash,Grey,5 star,10 years warranty as per department incharge 192 Supplying of water bath ,unstirred water bath s ,Digital info Water bathdigital,18L amb+5 tp 99 degree C includes clear lid and base trayas per department incharge 193 Supplying ofmini rotary shakers 50to 400RPM,features-220/230 V ac,Power supply-50-60Hzas per department incharge 194 Supplying of Magnetic stirrer- capacity 5 litre Spinit Digital Magnetic Stirrer Features-Type of Product-Magnetic stirreras per department incharge 195 Supplying of Digital ultrasonic cleaners (Specification: tank capacity 4 L, ultrasonic power 100W, Heating, Power-100W, time setting 1-99 min, heating temp up to 80 degree, in and out both in ss, with digital timer auto stop of sonication. 230V AC +-10% 50HZ. Tank size 300x150x100mm, overall size 330x180x240mm.supplied with basket and Lid.) as per department incharge 196 Supplying of Calomel electrode (Product Specification:Packaging Type-Box.,Length-120 mmUsage-Electrochemical Study(Laboratory))as per department incharge 197 Supplying of Pt-wire counter electrode (Product Specification Electrode Diameter-0.5 mm,Power Source-10A) as per department incharge 198 Supplying of UV-LAMP Cabinet(Product SpecificationSize/Dimension-15 X 12 X 10 (H) Light Source-3 NOS , SHORT WAVE -254nm-1no, LONG WAVE-365nm, VISIBLE LIGHT,Material-MILD STEEL,Voltage 230 V AC) as per department incharge 199 Supplying of Magnet (Magnet Grade-N48 Shape-Cup & Pot,Material Neodymium,Dimensional Tolerance+-0.05 mm,Plating / Coating-Ni-Cu-Ni Colour-red,Surface Gauss 3000 Gauss,Maximum Working Temperature (Deg. C)-230 Deg. C as per department incharge 200 Supplying of Micro Centrifuge tube(Specification: Usage/ApplicationLaboratory Analyzers,Material,Polypropylene Color-White,Pack Contains--20 Packet / carton & 500 pcs / packet,Shape-Conical,Length-4.1 cm,Inlet Diameter-1.3 cm Capacity2 ml)as per department incharge 201 Supplying of Micropiprtte(10-100uL),(Product Specification Capacity-10 ml,Volume Increment -0.1 microlitre Material-Glass,Autoclavable-Yes)as per department incharge 202 Supplying of Micropiprtte(10-1000uL),( Product Specification Material-Plastic,Capacity-Up to 1000ul,Color-Transparent Usage/application-Chemical Laboratory) as per department incharge 203 Supplying of printer-Black and white print ,scan,copy all in one printer Product Specification Print Speed-Up to 18ppm / 19ppmLaser Printer,Color Output-Black & White,Print Technology LaserjetUsage/Application-Printing,Supported Paper Size-A4 Compatible Operating Systems1,Windows 8,Windows 7,Windows Vista,Windows XP,Windows 2000,Mac OS X 10.4 - 10.8,Linux*3 Print Resolution-Up to 600 x 600DPI,1 200 (Equivalent) x 600DPI,Print Language-UFR II LT Dimension-372 x 371 x 254mm (With the Cassette Opened)Weight(W/O CRG)-7.6kg,Monthly Duty Cycle-8000 Pages Power Consumption 960W(Maximum),First Printout Time7.8s / 7.7s (A4 / LTR),Zoom 50 - 200% in 10% Increments Refill Type Toner Cartridge,Internal Memory 64 MB Printer Language UFR II LT (Host Based),Paper Weight 60 to 163g/m2 (Cassette),Copy Speed Up to 18 / 19Cpm (A4 / LTR) Halftones 256 levels,Copy Resolution 600 x 400 DPI Display 7 - Segment,1 - Digit LED as per department incharge 204 Supplying of printer-colour print ,scan,copy all in one printer (Specification :Functions-Print | Scan | Copy,Technology-Inkjet Color output-Color | B&W,Connectivity-Wireless(Wi-Fi) Usage-For Office ,Paper size-A4,Print speed upto 40 pages/min)as per department incharge 205 Supplying of photocopier branded fast print 50ppm high image resolution superior print quality,fast scan up to 50ppm A4 Monocolouras per department incharge 206 Supplying of LAN.Networking,cabling,switches,Wi-Fi points(10 points in each department) as per department incharge 207 Supplying of installation of Printer (Black and white),Printer( colour),Photocopier and LAN,Networking,Cabling,Switches,Wifi Points as per department incharge 208 Supplying of RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio as per department incharge 209 Supplying of Freightof RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio) as per department incharge 210 Supplying of wall mount (Dimension long:Telescopic Adjustable CCTV camera mounting bracket -Color: Beige Universal Camera Bracket, Heavyduty weatherproof iron bracket fits mostbrands of outdoor camera housing,Iron stand Platsic APPLICATION: Ideal for indoor outdoor dome cameras, Security Camera Mount Bracket, high quality with professional design,more stable and reliable.Hidden hole: Cable can feed thru L bracket tothe housing thus provide cable protection Outdoor and Indoor Use.)as per department incharge 211 Supplying of Camcorder Compact full HD ENG Camera with 20X zoom and 5 axis image stabilization. 20X optical zoom (26.8mm, F/1.8-576MM, F/2.;28.8MM, f/1.-576mm). 5 axis image stabilization. Support formats: full HD50P/60P, AVCHD/MP4;SD card slots 2 35mm film camera equivalent when dynamic IS is turned on with Tripod as per Department Incharge 212 Supplying of Video capture and video capture card (Product Specification:Converter type-USB,Material:Metal,Audio Jack:3.5 mm,HDMI Version:Hdmi-1.4,Audio:44100 AU,Video:Full HD Frame:48000 Resolutions)as per department incharge 213 Supplying of UPS(1KVa)(Product Specification: Type-Online UPS,Capacity-1 kVA,Configuration-1 Phase IN - 1 Phase OUT,Protection-OverVoltage,Form Factor-Tower Model Back Up Time-20- 30 Mins,Frequency-40 ~ 70 Hz (auto-sense) Usage/Application All) as per department incharge 214 Supplying of Studio light-125watt,5 LED BULBS consisting of 25watt bulb(Colour Temperature:5500 kelvin)as per department incharge 215 Supplying of Live streaming software for live streaming or live telecast as per department incharge 216 Supplying of Cables,installation,SSD Card(SAMSUNG VNAND SSD 850 EVO 2.5 250GB SATA III 3-D Vertical Internal Solid State Drive (SSD) MZ-75E250B/AM) as per department incharge 217 Supplying of complete making soundproof class(20*20 feet Room) as per department incharge 218 Supplying of RFID Tags RFID Book Lables(specification: Language ‏ : ‎ English,Simultaneous device usage ‏ : ‎ Unlimited Text-to-Speech ‏ : ‎ Enabled,Screen Reader ‏ : ‎ Supported Enhanced typesetting ‏ : ‎ Enabled,X-Ray ‏ : ‎ Not Enabled,Word Wise ‏ : ‎ Not Enabled) as per department incharge 219 Supplying of Anti theft stickers with the university logo(Polycarbonate 175 Microns Matt Finish) as per department incharge 220 Supplying of Middleware Application Desktop(writing and read tags) as per department incharge 221 Supplying of RFID Staff station or desktop reader (used for Tagging of books and circulation) operations through RFID as per department incharge 222 Supplying of Integration with software and Training of complete RFID System as per department incharge 223 Supplying of Data Encoding,Booking Tagging and Registration per book as per department incharge 224 Supplying of RFID Secuity Gates (2 pedestals - 1 gate),RFID Secuity Gate(Provide Installation Service-Yes,Support-24/7 (Live Reporting Language Support-English) as per department incharge 225 Supplying of Automated book drop box (ntegrated RFID Reader • Approx. 250 Books Receiving Cart (Movable) • Client Software for Checking-in Facility and communicating with LMS with provision for E-mail/SMS confirmation • Has automatic hutch which should open only on valid RFID tags and close once the book has been accepted to prevent the patrons from removing checked in books. • Communication with any LMS Software through SIP2/NCIP protocols • Compliant with internationally recognized standards for RFID based library self-services systems. • Book Drop can display item ID once item is returned. • Enabled with necessary items i.e.: Branded CPU etc. • 15” or higher LCD/LED Touch Screen Monitor. • Ethernet High Speed Receipt Printer (Reputed/Branded) • Customizable Design matching the library aesthetics; Contemporary and attractive. • Design is such that there is not damage to the dropped books. • Library Ethernet network and wireless network compliant. • Optional Features: Fingerprint Scanner, Smart Card Readers etc) as per department incharge 226 Supplying of 5KVA Invertor -online UPS with battery back up 100Mah battery (8 units)(Product Specification,Capacity-1100 Voltage-130V ,Rated Input Power-5 KVA,Display-Digital Type-Square Wave Inverter Country of Origin) as per department incharge 227 Supplying of LAN,Switches,Necessary cabling,casing,power supply port including cables as per department incharge 228 Supplying of Installation charges of RFID Tags,Anti-theft sticker,Middleware Application Desktop,RFID Staff statio,Integration of software,Data incoding books,RFID Secuirty Gates,Automated Book Drop Box,Cabling,Casing,Wiring,Switches,LAN as per department incharge 229 Supplying of Air conditioning 1.8Ton heavy duty AC (minimum 3 star rating,Coil material -copper,Power consumption-1950W,Power Requirement -AC 130-285V, 50Hz) as per department incharge 230 Supplying of Desktop,i5 processor ,7th Generation,500GB HDD,4GB RAM,23.8 INCH LED Backlit Monitor,Full HD IPS Panel(Brand-HP,Dell,Acer) as per department incharge 231 Supplying of Headphone with built in microphone,(Communication-Wired) as per department incharge 232 Supplying of 75 diagonal length with 3 GB RAM and 48 GB ROM ,Slim frame anti glare glass.3M Antiglare ,H7 Touch surface hardness,Light weight for easy installation as per department incharge 233 Supplying of Dedicated server-HPE Proliant DL 380,Gen 10 5218.2.3GHz 16core ,1P-32GB-R P408ianNC 8SFF 800WPS Server,Intel xeon G5218 Kit for DL 380,Gen 10 as per department incharge 234 Supplying of 5.5KVA Inverter with battery backup,Microtek inverter,online UPS ,65Mah battery(16 unit )-Exide as per department incharge 235 Supplying of Freight Transportation Charges of Desktop,Headphone,LAN Switches,4K-OPS,Dedicated server,5.5 KVA Inverter with battery back up and Air conditioner as per department incharge 236 Supplying of 86 Diagonal interactive display,3 GB RAM,48 GB ROM,4K Display Android model,Slim framenAnti glare Glass,H7 Touch Surface hardness ,Light weight for easy installation ,Media Suits for Annotation softwatr bundled with education Apps as per department incharge 237 Supplying of 4k OPS i5,7th Gen,8GB RAM,128 GB SSD as per department incharge 238 Supplying of play mounting including white board & Green board,Material post formed ply,Size 15ft(length)x7ft(ht) with green board for chalk,whiteboard for marker and cupboard as per department incharge 239 Supplying of UPS (1KVa,Phase-Single phase.Back up Time 10-20 min,Frequency-50Hz) as per department incharge 240 Supplying ofTraining and installation of 86 diagonal interactive display,4k-OPS,Play mounting including white board & Green board and UPS of 1KVA as per department incharge 241 Supplying of Digital Podium PTGN 500 Windows 8.1 LCD ,Electronic Lectern,On site OEM Warranty in 3 yearsas per department incharge 242 Supplying of PA System sound system with amplifier 350 watt ,30 watt speaker (4 nos) as per department incharge 243 Supplying of wireless mic Dual channel cordless microphone as per department incharge 244 Supplying ofTraining and installation of Digital Podium,86 Diagonal interactive display (4k display),4K-OPS,Play mounting including white board and green board,5KVA invertor,PA System and wireless mic as per department incharge 245 Supplying of Desktop :- 1).i5 Processor, 7th Generation, 500GB HDD, 4GB RAM, 2).23.8 inch. LED backlit Monitor Full HD IPS Panelas per Department Incharge 246 Supplying of 55 LED Display for CCTV Branded LED Display as per department incharge 247 Supplying of CCTV Camera IP based CCTV camera,2 TB Space with NVR with necessary accessories as per department incharge 248 Supplying of Stagmometer as per Department Incharge 249 Supplying ofViscometer as per Department Incharge 250 Supplying of Beaker-50ml as per Department Incharge 251 Supplying of Beaker-100ml as per Department Incharge 252 Supplying of Beaker-250ml as per Department Incharge 253 Supplying of Beaker-500ml as per Department Incharge 254 Supplying of Beaker-1000ml as per Department Incharge 255 Supplying of Buchner Funnel 3 as per Department Incharge 256 Supplying of Buchner Funnel 6as per Department Incharge 257 Supplying of Burette-50ml as per Department Incharge 258 Supplying of Chromatography column 1x18 with stop cock as per Department Incharge 259 Supplying of Conical flask-100ml as per Department Incharge 260 Supplying of Conical flask-250ml as per Department Incharge 261 Supplying of Conical flask-500ml as per Department Incharge 262 Supplying of Conical flask-1000ml as per Department Incharge 263 Supplying of Flat Bottomflask-500ml(Round) B-24 socket as per Department Incharge 264 Supplying of Round bottom flask-50ml Joint B-24 as per Department Incharge 265 Supplying of Round bottom flask-100ml Joint B-24 as per Department Incharge 266 Supplying of 3 neck RB flask B-29,B-19.as per Department Incharge 267 Supplying of Condenser Spiral B-24 and, B-19 as per Department Incharge 268 Supplying of Condenser Spiral B-24 and, B-24 as per Department Incharge 269 Supplying of T-type tube as per Department Incharge 270 Supplying of Rubber Cock No. 10 as per Department Incharge 271 Supplying of Specific Gravity hydrometer 800-1000 as per Department Incharge 272 Supplying of Specific Gravity hydrometer 100-1200 as per Department Incharge 273 Supplying of Universal hydrometer 1000-2000 as per Department Incharge 274 Supplying of Measuring Cylinder-10ml as per Department Incharge 275 Supplying of Measuring Cylinder-50ml as per Department Incharge 276 Supplying of Measuring Cylinder-100ml as per Department Incharge 277 Supplying of Measuring Cylinder-500ml as per Department Incharge 278 Supplying of Measuring Cylinder-1000ml as per Department Incharge 279 Supplying of Measuring Cylinder-2000ml as per Department Incharge 280 Supplying of Measuring flask-100ml as per Department Incharge 281 Supplying of Measuring flask-500ml as per Department Incharge 282 Supplying of Measuring flask-1000ml as per Department Incharge 283 Supplying of Pipette-0.5ml as per Department Incharge 284 Supplying of Pipette-2ml as per Department Incharge 285 Supplying of Pipette-5ml as per Department Incharge 286 Supplying of Pipette-10ml as per Department Incharge 287 Supplying of Pipette-25ml as per Department Incharge 288 Supplying of Separating Funnel-250ml B-24/B-24 as per Department Incharge 289 Supplying of Spatula Flat Spoon 6as per Department Incharge 290 Supplying of Spatula Flat Spoon 5as per Department Incharge 291 Supplying of Stop Cork 2wayas per Department Incharge 292 Supplying of Silica crucible-15ml without Lid as per Department Incharge 293 Supplying of Silica crucible-25ml without Lid as per Department Incharge 294 Supplying of Stalagmometer Straight Graduated as per Department Incharge 295 Supplying of Chemical thermometer 10c-110c as per Department Incharge 296 Supplying of Chemical thermometer 0c-250c as per Department Incharge 297 Supplying of Tiration flask-100ml as per Department Incharge 298 Supplying of Tiration flask-250ml as per Department Incharge 299 Supplying of Tongs crucible S.S.8 as per Department Incharge 300 Supplying of Test tube holder as per Department Incharge 301 Supplying of Filter Flask-500ml as per Department Incharge 302 Supplying of Filter Flask-1000ml as per Department Incharge 303 Supplying of Watch glass 3 as per Department Incharge 304 Supplying of Watch glass 4 as per Department Incharge 305 Supplying of Watch glass 6 as per Department Incharge 306 Supplying of Wire gauge150x150mm as per Department Incharge 307 Supplying of Tripod stand 8 as per Department Incharge 308 Supplying of boiling Test tube 1x8as per Department Incharge 309 Supplying of boiling Test tube 2x8as per Department Incharge 310 Supplying of Reagent Stickers 2x1 as per Department Incharge 311 Supplying of Ordinary Filter paper as per Department Incharge 312 Supplying of Reagent bottles-250mlas per Department Incharge 313 Supplying of Rubber cork as per Department Incharge 314 Supplying of Rubber tube 6mm as per Department Incharge 315 Supplying of Solid Reagent bottle-125mlas per Department Incharge 316 Supplying of Stopwatch plastic body as per Department Incharge 317 Supplying of Test tube stand 12 holes as per Department Incharge 318 Supplying of Thermometer 360 as per Department Incharge 319 Supplying of Test Tube 6mmx15cmas per Department Incharge 320 Supplying of Test Tube 10mmx10cm as per Department Incharge 321 Supplying of China dish 3 as per Department Incharge 322 Supplying of China dish 4 as per Department Incharge 323 Supplying of Brushes for Test Tube as per Department Incharge 324 Supplying of Brushes for Burette as per Department Incharge 325 Supplying of Brushes for Conical flask as per Department Incharge 326 Supplying of LPG gas burner as per Department Incharge 327 Supplying of Condenser Coil 12 as per Department Incharge 328 Supplying of Receiving adopter with vacuum outlet as per Department Incharge 329 Supplying of Plastic Wash bottle-500mlas per Department Incharge 330 Supplying of Pastel and Mortar 3 as per Department Incharge 331 Supplying of Pastel and Mortar 4 as per Department Incharge 332 Supplying of Pastel and Mortar 6 as per Department Incharge 333 Supplying of China Clay 2 as per Department Incharge 334 Supplying of China Clay 3 as per Department Incharge 335 Supplying of China Clay 4 as per Department Incharge 336 Supplying of Petri Dish 3(Borosil) as per Department Incharge 337 Supplying of Petri Dish 4(Borosil) as per Department Incharge 338 Supplying of Distillation Set-Complete flask-500ml as per Department Incharge 339 Supplying of Distillation Set-Complete flask-1000ml as per Department Incharge 340 Supplying of Thermometer Pocket B-14 as per Department Incharge 341 Supplying of Sintered Glass Funnel-25ml as per Department Incharge 342 Supplying of Air Condenser 12 as per Department Incharge 343 Supplying of Burette Stand with Clamp as per Department Incharge 344 Supplying of Cork borer as per Department Incharge 345 Supplying of Capillary Tube for melting point as per Department Incharge 346 Supplying of Dessicators 6 as per Department Incharge 347 Supplying of Dessicators 8 as per Department Incharge 348 Supplying of Dropper with Rubber teats 6 as per Department Incharge 349 Supplying of Dropper 4(Borosilicate glass) as per Department Incharge 350 Supplying of Dropping bottle-125ml as per Department Incharge 351 Supplying of Funnel Stand as per Department Incharge 352 Supplying of Fusion Tubeas per Department Incharge 353 Supplying of Glass Rod as per Department Incharge 354 Supplying of Glass Tube as per Department Incharge 355 Supplying of Stopwatch Steel body as per Department Incharge 356 Supplying of Magnetic Stirrer as per Department Incharge 357 Supplying of Rubber Gloves as per Department Incharge 358 Supplying of Reagent as per Department Incharge 359 Supplying of Sandbath as per Department Incharge 360 Supplying of Tissue Paper(Local made) as per Department Incharge 361 Supplying of Double Beam PC Microprocessor UV-VIS Spectrophotomet erMake:Systroni cs Model: 2202 PC Based Double Beam Automatic source optimization ,Base line calibration & Cell optimization 200 - 1100 nm Range2. 0 nm Bandwidth%T. Abs. Conc . (K factor. Multi standard ). Multi component measuring modesSingle Wave length, Multi Wave length Scan (with multi scan facility). Time Scan. Kinetic scan operating modes Automatic 5 position sample changer Single Position 50 /100 mm Cuvette Holder (Optional) as per Department incharge 362 Supplying of Refrigerated Centrifuge,(Specification:Speed:- 20000 Max.,RCF:- 37570 Max.,Lowest Temp:- -8,Noise:- <-60db)as per Department incharge 363 Supplying of Refrigerated Centrifuge Essential accessories Required:. With angle Heads (with polypropylene tubes)Model- R-248M 24xl.5 ml as per Department incharge 364 Supplying of Refrigerated Centrifuge 2. Voltage stabilizer:- 03 KW Servo controlled Voltage Stabilizer, input 170 volts to 260 volts, output 220 volts to 240volts as per Department incharge 365 Supplying of PCR machine(Specification- Well block, Gradient, temp. range 4° - 99-irC, memory capacity 10000 protocols , display 7inch,volume capacity I 0- 100 μL , preloaded protocol, temperature accuracy ±0.2°C@99°C, with PCR wizard as per Department incharge 366 Supplying of SOS PAGE unit and Western Blot apparatus along with power bank -Mini-TBC electroph_oretic transfer cell, includes: Mini 01P-4 cell tank and lid with cables, buffer, Mini transfer module, gel holder cassettes, 4 fiber pads, cooling units, instructions, Western blot unit, compatible power bank as per Department incharge 367 Supplying of pH Meter With electrode(Type of PH Mater - Portable,Ph Range:0-14,Resolution-0.01pH,compensation-0 to 80 degree celsius) as per Department incharge 368 Supplying of Deep fridge(It is used to store chemicals and preserve samples at very low sub-zero temperatures or below)as per Department incharge 369 Supplying of Autoclave (Vertical)Size- 400 x 600mm ,;Capacity- 75Ltr as per Department incharge 370 Supplying of Hot air oven (Sterilization) as per Department incharge 371 Supplying of Incubator Shaker-Growth and enumeration of microbes (Broth cultures) as per Department incharge 372 Supplying of Horizontal Laminar air flow(Sterile environment Size 4X2)as per Department incharge 373 Supplying of Horizontal Agarose gel electrophoresis unit with gel caster and Power pack Separation of macromoleculeas per Department incharge 374 Supplying of Vortex mixture-To mix content of test tubes and microfuge tubes. as per Department incharge 375 Supplying of Ultrapure Water Purification System:MiliQ Water For distill wateras per Department incharge 376 Supplying of Micropipets - 0.1μL-2.5μL 0.5μL-10.0μL 10.0μL-l00μL 20.0μL-200μL l00μL-l000μL as per Department incharge 377 Supplying of Quebec Colony Counter -Count the microbial colonies as per Department incharge 378 Supplying of Light Microscope (General) 10X,20x, 45x, l00x Visualize microorganisms as per Department incharge 379 Supplying of Bifocal microscope with illuminators, Camera attachment and computer Visualize microorganisms and microgrphy as per Department incharge 380 Supplying of Magnetic stirwith Hotplate and magnetic beads To stir the liquids , preparation of solution as per Department incharge 381 Supplying of Heating mantle For heating round bottomed flask/distillation flask as per Department incharge 382 Supplying of Microwave oven To heat liquids instead of flaming. Samsung/ LG 20 Ltrs as per Department incharge 383 Supplying of Glass Dessicators Used for dessication as per Department incharge 384 Supplying of Fluorescence microscope A fluorescence microscope is an optical Microscope that uses fluorescence and phosphore scence instead of,or in addition to, reflection and absorption to study properties of organic or inorganic substances as per Department incharge 385 Supplying of Electronic Analytical Balance It is used to weigh small quantities of chemicals and samples precisely and quickly. Readability- 1 mg (0.001 g) Cap.- 420gm as per Department incharge 386 Supplying of Electronic Top pan Balance- Readability- 0.1 g Cap.- 2 kg.as per Department incharge 387 Supplying of Double Distillation Unit ,.Approx output: 2 Lit/hrs Wattage:3.3 .KW With safety Cutoff Device Water Stills are carefully designed to produce high purity pyrogen free distiiied water. The water still comprises ofborosilicates glass horizontal typeboiler, coil condenser, constant level device, silica sheathed heaters, along with stand and clamps. All parts are replaceable. pH/conductivity:6-7 / 1-2 μSiem forsingle, 6-7/0.8-lμS/cm for double distilled water as per department incharge 388 Supplying of Microtome-5286(Product Specification Minimum Setting Value-0.5 um,Object Feed-28 mm,Vertical Stroke-60 mm,Specimen Orientation X and Y Axis Universal 8 Degree Trimming Thickness Range-1 um-100 um Operation-Automatic. (Motorized Feed & sectioning and Emergency Stop Provided),Sectioning Speed-0-400 mm/sec.,Specimen-Orientation Z Axis-Upto 360 Degree,Retraction Value-Adjustable Max Specimen Size-50 x 50 mm,Section Thickness Range-0.5 um-60 um)Senior rotary microtome as per Department incharge 389 Supplying of Cryostat -(Product Specification Section Thickness Range-0.5 Micron to 100 Micron (with the increment of 0.5 Micron, 1 Micron, 2 Micron, 5 Micron) Power Supply-220v,Dimension-750mm x 750mm x 950mm (approx) Weight -123 kg (approx),Remote Control-Optional,Sectioning Mode-Single step mode/ Continuous mode Hand Wheel Control-Feather Touch Keypad/ Foot Switch/ Remote Control (optional),Sterilization-U.V-C Sterilization,Cooling down time Up to -30 DegreeC-2 Hour 30 Min Specimen Retraction setting Range-5 Micron to 100 Micron (with increment of 5 Micron),Compressor-Dual Compressor,Cryo Chamber Temp. Adjustable -1 DegreeC to -30 DegreeC Block Holder Head Temperature-Adjustable -1 DegreeC to -35 DegreeC Illumination-LED Lamp)Ultimate usico fully automatic cryostat as per Department incharge 390 Supplying of ELISA -Vet scientific(Specification-Product Specification Automation-Semi Automatic,Assays Performed-ELISAs, Immuno Assays Plate Format-96 well,Optical System Filter-based Detection Method-Absorbance,Number Of User Programs 42 Storage-100000 Results,Filter Positions-8 Display Type-Touch Screen Packaging Type-EXPORT QUALITY,Testing Speed-3 second Type Of Filter 405,450,492, 630,Power Source-115/230 V AC, 50Hz,Weight-9 Kg,Is It Portable-Non Portable, sample Type-Serum, Plasma, Urine, CSF, Whole Blood,sample Volume Range-10-100 Interface-RS232/ USB) as per Department incharge 391 Supplying of Calorimeter -A VI Digital (A VI Scientific,Frequrcy:50Hz,Voltage:230-280V,operating time per test-10 min) as per Department incharge 392 Supplying of HaemometerSahli type-Microsidd (Specification:Amber coloured glass bottle -1 No.,Glass Stirrer-1 No.,Dropper with teat -1 No.,Cleaning Brush -1 No.,Spare latex tubing one meter -1 No.Round tube haemoglobinometer) as per Department incharge 393 Supplying of Anti - theft Sticker with the University logo as per Department incharge 394 Supplying of Middleware Application Desktop(Write and Read Tags) as per Department incharge 395 Supplying of RFID Staff Station or desktop reader (Used for tagging of books and circulation {lssue/Return) operations through RFID) as per Department incharge 396 Supplying of Integration with Software and Training of Complete RFID System as per Department incharge 397 Supplying of RFIDSecurityGates (2 pedestals-1 gate) RFID Security Gate (Single Lane) as per Department incharge 398 Supplying of Automated Book drop Box as per Department incharge 399 Supplying ofCabling. Casing. Wiring , Switches as per Department incharge 400 Supplying of Freight Transportation of Miidle ware Application Desktop,RFID STAFF Station,Integration with software training,Automated Drop box ,Cabling,Casing,Wiring,Switches as per Department incharge 401 Supplying of LAN . Switches, Necessary Cabling, Casing , Power Supply port including cables as per Department incharge 402 Supplying of Dedicated serverGHZ 16 core 1P-32GB -RP408ia -NC8SFF800WPS Serverintel Xeon -G5218 Kit for DL 380 GEN-10-HPE 32GB 2RX4 PC-4 2933YR Smart kit ,HPE DL38x Gen 10-12 Gb SAS Expande,HPE DL 380Gen 10 Box 1/2 Cage Bkpin kit ,HPE 24TB SAS 12G 10K SFF SC 512eDS HDD .HPE 800 WFS Ht Plg LHPwr Sply kit,HPE 3 Year Fiundation care 24x7 DL 380 Gen 10 Serviceas per Department incharge 403 Supplying of RS 86+_TB619RS, 3GB RAM and 48 GB ROM,4K Display Android model,3 GB RAM And 48 GB ROM,slim frame,Anti Glare Glass,3M Anti glare H7 Anti touch surface hardness lightweight for easy installation,Media suits for Annotation,Software bundled with education apps,Office suits,Great writing experience,Object recognition -First pal,/Fine pen ,Touch Points-20 points under window and 10 points under android,178 degree viewing angle IR ,Touch 15000,1 contrast ratio,4 MS Response time 50000 hours life,Reduce clutter and bring efficiency for the faculty,Remote control,15 wattX2 speaker,Android 8.0,Newline cast,Display management,Newline broadcast including installation and Trainingas per Department incharge 404 Supplying of Deep Fridgeas(2 in 1 Converti Freezer & Cooler Corrosion Resistant Cooling Coil & PPGI for inner & outer body Heavy Duty Compressor & Tropicalised Design Approximately 14% Higher Net Capacity compared to competition Sleek Design with heavy duty performance) per Department Incharge 405 Supplying of Autoclave (Horizontal,Height X Dia: 450mm x 250mm Height x Dia: 18Inch x 10Inch,Capacity: 22 Ltr,Load: 2.0 KW) as per Department Incharge 406 Supplying of Autoclave (Vertical): size- 400x600mm, Capacity- 75Ltr as per Department Incharge 407 Supplying of Hot air oven(Standard double wall fabrication. Inner chamber made of highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations.Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50c to 250c + 1c controlled by capillary type thermostat.Inner Chamber Size 18x18x18 inch. made of Stainless Steel) : any Standard make as per Department Incharge 408 Supplying of Bacteriological incubator(Item Weight ‎10 kg Product Dimensions-30 x 30 x 30 cm; 10 Kilograms,Item model number-12X12,Item Height-30 Centimeters Item Width-30 Centimeters) as per Department Incharge 409 Supplying of Bacteriological shaking incubator as per Department Incharge 410 Supplying of BOD incubator as per Department Incharge 411 Supplying of Laminar air flow any Standard company as per Department Incharge 412 Supplying of Micropipettes with microtips :(1.0uL-10.0uL, 10.0uL-100uL, 100uL-1000uL, 20uL-200uL): A. Prime Variable Pipette, B. Fully Autoclaveable Variable Vol. Pipetteas per Department Incharge 413 Supplying of Colorimeters with cuvettes any Standard company as per Department Incharge 414 Supplying of Western Blot apparatus, as per Department Incharge 415 Supplying of Powerpack with wiresas per Department Incharge 416 Supplying of Homogeniser as per Department Incharge 417 Supplying of PCR machine Block Formats 96x0.2ml(A),54x0.5ml(B), 96x0.2ml +77x05ml©, 384well(D) Size(WxDxH,mm)-380x270x250 as per Department Incharge 418 Supplying of UV Transilluminator/UV chamber UV source: 365nm Wave Length Viewing area: 24x14cm Anti Slip rubber foot provided for base as per Department Incharge 419 Supplying of CO2 incubator as per Department Incharge 420 Supplying of pH meter and buffers: A.pH meter B. pH buffers as per Department Incharge 421 Supplying of Water bath (any Standard company ) as per Department Incharge 422 Supplying of Fume Hood: size- 3x3x2 wooden with Granite working area as per Department Incharge 423 Supplying of Soxlet apparatus with heating mantle and distillation set up as per Department Incharge 424 Supplying of Kjeldahl Apparatus as per Department Incharge 425 Supplying of Ultrapure Water Purification System: MiliQ water as per Department Incharge 426 Supplying of Quebee Colony Counter as per Department Incharge 427 Supplying of Light Microscope (general) 25x, 45x, 100x s as per Department Incharge 428 Supplying of Bifocal microscope with illuminators as per Department Incharge 429 Supplying of Magnetic stirrer with magnetic beads(any Standard company )as per Department Incharge 430 Supplying of Magnetic stirrer with hot plate (Remi) as per Department Incharge 431 Supplying of Heating mantleas per Department Incharge 432 Supplying of Microwave oven ((20Ltr) as per Department Incharge 433 Supplying of Glass Dessicators as per Department Incharge 434 Supplying of Computer : Core i9, 7th Gen. 20 LED Monitor, 4GB DDV, 1TB HDD, DV writer HP/Dell as per Department Incharge 435 Supplying of Culture room: Tissue culture Rack fitted with 16 tubes, 8 bulbs, 4UV & Timer as per Department Incharge 436 Supplying of Electronic Analytical Balance:- Readability- 1mg(0.001g) Cap.-420gm as per Department Incharge 437 Supplying of ElectronicTop-pan Balance:-Readability- 0.1g Cap- 2kgas per Department Incharge 438 Supplying of Electroporator:- as per Department Incharge 439 Supplying of Fermenter(7.5L)(any Standard company )as per Department Incharge 440 Supplying of Fluorescence Microscopeas per Department Incharge 441 Supplying of Hot air oven universalas per Department Incharge 442 Supplying of Distillation Unit as per Department Incharge 443 Supplying of Membrane filter assembly 5000 mlas per Department Incharge 444 Supplying of Fluorimeter as per Department Incharge 445 Supplying of Homogeniser: Remi model- RQT-127 A/D High speed homogenizer, with 1/8 HP Motor, Homogenizer Working Volume [H2O] 0.1-50ml (Dispersing shaft DS-160/5) WEIGHT 0.6KG Dimension[LxWxH] 46mmx55mmx230 operating environment 0-40degre, 85% rel. humidity as per Department Incharge 446 Supplying of ELISA reader and Microtitre plates: ELISA Wavelength range 400nm-800nm Accuracy- +-1% at 1.0OD, 450nm Dimension 450x350x197mm as per Department Incharge 447 Supplying of Liminar air flow : 4x2x2 feet, stainless steel as per Department Incharge 448 Supplying of Gel Documentationd system as per Department Incharge 449 Supplying of 5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 450 Supplying of 12V/26AH- Batteryas per Department Incharge 451 Supplying of Headphone with built in microphone (Brand) as per Department Incharge 452 Supplying of Furniture:- Computer Table & Chairs & Table- Chair for lab. Instructor and student (50 students per batch) as per Department Incharge 453 Supplying of Network:- LAN, Switches, Cabling, Casing Power Supply Port including Cables as per Department Incharge 454 Supplying of 5.5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 455 Supplying of RS86+ TT8619RS 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0, Newline Cast, Display Managemen, Newline Broadcast Including Installation and Training. as per Department Incharge 456 Supplying ofpH meter(Digital) :- pH range: 0-14, Temperature Range: 0.0 to 100 C (Manual Compensation) as per Department Incharge 457 Supplying ofNoise Level meter:- Auto/Manual ranging from 30 to 130dB in 6 ranges as per Department Incharge 458 Supplying ofWater analysis Kit:- They include; alkalinity, chloride, hardness, iron, and sulphate as per Department Incharge 459 Supplying ofHigh volume sampler:- 1)PM-2.5- Designed to meet International Standards for High volume air Sampling of PM2.5 particulates. 2)PM-10-U.S EPA FRM Designed for the determination of suspended of PM-10 particulates concentrations. (RFPS-1287-063) 3)TSP- Designed to meet U.S EPA reference method for determination of total suspended particulates(TSP) concentration as perDepartment Incharge 460 Supplying ofSoil testing kit (mrinda parikshan kit) : Use for micro and macro nutrients as per Department Incharge 461 Supplying ofSeive plate with shaker : 5mm,1mm,2mm) as per Department Incharge 462 Supplying ofUV/Visible spectrophotometer:- Spectral bandwidth 1 nm (190 to1100nm , Lamp Type 20-W halogen lamp and deuterium lamp as per Department Incharge 463 Supplying ofAutoclave : 10-15 litre Steam Sterilizer as per Department Incharge 464 Supplying ofLaminar hood (Horizantal) : Horizontal air flow cabinet, filter air blow across the work zone in horizontal direction. This constant flow of air provides material and product protection as per Department Incharge 465 Supplying ofHot plate(pic):-Temperature range: 350 C as per Department Incharge 466 Supplying ofShakeer incubator Compact Bench top shaker with temperature control range from Ambient +50C to 600C. Tray dimension : 420x420 , Speed 50-350 rpm with accuracy of +/- 2rpm as per Department Incharge 467 Supplying ofMuffle Furnaces (15x125x250)cm: Temperature upto 35C to 1400C as per Department Incharge 468 Supplying of Analytical Balances:Capacity 220gram as per Department Incharge 469 Supplying ofDigester : 1) vessel size : Dia 39 mm (Aprox.); Volume 160ml 2)Temperature : upto 200degC as per Department Incharge 470 Supplying ofDouble distilled water plant: Model- Vertical:- Distlled Water Output Capacity-2.5 Litres/Hours, Distillate water quality as per Department Incharge 471 Supplying ofOven:- Dry ovens- 30 to 1000 litre capacity. as per Department Incharge 472 Supplying of B.O.D Incubator: Volume 68 Litre as per Department Incharge 473 Supplying ofMagnus Microscope:- Magnification 4x,10x,40x, and 100x as per Department Incharge 474 Supplying ofDesiccators:- Contain: Silica Gel dimension;12x12 in (30.5x30.5 cm),Material Glass as per Department Incharge 475 Supplying ofRichter scale hardness tester Portable Rockwell/brinell vickers Hardness Testing Instrument Mold metal hardness meter display:-parameter- HRC Display Type, Digital Model Name/Number- ATedigiHR, Accuracy- 0.1 HRC Dimensions of Machine base (approx.) 150x425 mm as per Department Incharge 476 Supplying ofProctor Penetrometer: Proctor Penetrometer- Complete with set of needle points Weight, 2 kg as per Department Incharge 477 Supplying ofGas Chromatography Retention time repeatability-< 0.008% or 0.0008 min Area rpeatability -<1% RSD, using 2ng tetradecane as per Department Incharge 478 Supplying of Atomic Absorption Spectrometry(AAS):- aa-7000 SERIES OF Atomic Absorption Spectrophotometers features high- sensitivity analysis as per Department Incharge 479 Supplying ofWavelength range; 400 to710nm Wavelength selection: 8 in-built gelatin filters: 430,470,490,520,540,580,600 and 710 nm Measurement ranges; 0-100%T, 0-1.50Abs, 0.1 to 1000 Concentration. Resolution: 1%T, 0.01Abs, 0.1 to 1 Concentration as per Department Incharge 480 Supplying of Laptops(of Specification:Processor Corei5,RAM:4GB,Hard drive:500GB ,Screen size:12 inch):as per Department Incharge 481 Supplying of Desktops: i7 3rd Gen, 1TB HDD, 4GB RAM, Windos 10, MS office, Graphics card as per Department Incharge 482 Supplying of Xerox Machine(Product Specification:Functions Multi-Function:Supported Paper Size-A3,Supported OS-all,Color Output-Black & White,Number Of Trays-4,Item Color-white and blue Print Speed-up to 35 ppm,Weight 129 kg,Print Technology-Laser Warm-Up Time, As fast as 11 seconds (black and white) Duty Cycle-WorkCentre 5335: Up to 150,000 pages / month Resolution-200 x 1200 dpi) as per Department Incharge 483 Supplying of Air Conditioning:-1.5 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 484 Supplying of Luminous Cruze 3.5KVA Inverter with RC 18000 Battery (4 Batteries) as per Department Incharge 485 Supplying of Projector(Special Feature-portable,Connectivity Technology,Bluetooth, Wi-Fi, USB, HDMI,Display resolution 1920 x 1080,Display Type-LED) as per Department Incharge 486 Supplying of Godrej Lecture Hall Furniture as per Department Incharge 487 Supplying of Electronic Podium(Speaker type-Tweeter,Auxillary,wireless,floor standing) as per Department Incharge 488 Supplying of Smart board (Screen size-11 inches,Connecting technology-Wifi,Multimedia)as per Department Incharge 489 Supplying of Black board( Melamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS CornersMelamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS Corners) as per Department Incharge 490 Supplying of Glassware rack as per Department Incharge 491 Supplying of installation of Air conditioner,Luminous Cruze,Projector,Lecture Hall Furniture,Electronic podium,Smart board and black board as per Department Incharge 492 Supplying of Inductively coupled Plasma - Optical Emission Spectrometer with CID detector technology for multi-element analysis of geological petrogical etc. samples in ppb level as per Department Incharge 493 Supplying of Suppressed ion analysis system for anion and cation analysis in water, wastewater, environmental samples and also upgradable to combustion for determination of corrosive halogens and sulfur in Petrochemicals, gaseous samples, solid samples, and complex samples as per Department Incharge 494 Supplying of CHNS/O for the analysis of Carbon, Hydrogen, Nitrogen, Sulfur and Carbon in organic matrices, soil, feed , plant samples, petroleum products, Coal, Coke, Biomass & Liquid Fuels as per Department Incharge 495 Supplying of Gas Analyzers for hydrocarbon and permanent gas analysis as per Department Incharge 496 Supplying of Benchotop XRD as per Department Incharge 497 Supplying of XRF Spectrometer as per Department Incharge 498 Supplying of Refrigereted Centifuge MakE-REMI, Model-C24 PLUS :- Max. Speed:20000, Max. RCF:3757, Max. Lowest Temp.:8, Noise:60db. Essential accessories Required: 01. Withangle Heads (with polypropulene tubes) Model-R-248M24x1.5ml 2)Voltage stabilizer:-03KW Servocontrolled Voltage Stabilizer, input 170volts to 260volts, output 220 to 240volts as per Department Incharge 499 Supplying of pH Meter compatible poer bank Make: REMI :- With eletrode as per Department Incharge 500 Supplying of Bench top Centrifuge Make: Tarson, : - SPINWIN MC-001 6 places Rotor for 1.5 ml tubeas per Department Incharge 501 Supplying of Deep Fridge: It is used to store chemicals and preserve samples at very low sub-zero tempertures or below as per Department Incharge 502 Supplying of Autoclave(Vertical) : size- 400x600mm capacity- 75Ltr as per Department Incharge 503 Supplying of Hot air oven : Sterilization as per Department Incharge 504 Supplying of Incubator Shaker: Growth and enumeration of microbes(Broth Cultures) as per Department Incharge 505 Supplying of Horizontal Laminar air flow:- Sterile environment size 4x2as per Department Incharge 506 Supplying of Ultrapure Water Purification System: MiliQ Water : for distil water as per Department Incharge 507 Supplying of Micropipets (Ependroff): 0.1uL-2.5uL, 0.5uL-10uL, 10.0uL-100uL, 100uL-1000uL each oo these 1pcs as per Department Incharge 508 Supplying of Light Microscope (general)10X, 20X, 45X, 100X, : Visualize microorganisms as per Department Incharge 509 Supplying of Bifocalcal Microscope with illuminators, Camera Attachment and comput: Visuallize microorganisms and micrography as per Department Incharge 510 Supplying of Magnetic stir with Hotplate and magnetic bead as per Department Incharge 511 Supplying of Heatingmant; for heatinground bottomed flask/distillation flask as per Department Incharge 512 Supplying of Microwave oven: To heat liquids instead of flaming. 20Ltrs as per Department Incharge 513 Supplying of kydroPro 100 handeld multiparameter water quality analiser: Turbedityas per Department Incharge 514 Supplying of Petrological Microscope: Study of Optical minrology as per Department Incharge 515 Supplying of Ore petrological microscope: Study of ore petrology as per Department Incharge 516 Supplying of Miscellaneous instruments as per Department Incharge 517 Supplying of glassware as per Department Incharge 518 Supplying of chemical as per Department Incharge 519 Supplying of Arc GIS(Latest) as per Department Incharge 520 Supplying of GCD Toolkits as per Department Incharge 521 Supplying of SURPAC Software as per Department Incharge 522 Supplying of Intergraph Edu Kit [GIS+RS] Version 2020 or latest(Software content as per list), 5 users for Erdas imagine Professional and 5 users for Geomedia professional Software as per Department Incharge 523 Supplying of Interactive Flat Panel as per Department Incharge 524 Supplying of 2 Virtual Class Room including capture, recording and streaming online, 1 Servers one per 05 classrooms per Department Incharge 525 Supplying of N-computing for smart classrooms including servers and clients as per Department Incharge 526 Supplying of Tagging of documents(books/hard-bound journals/CDs/technical films etc)in RFID Technology as per Department Incharge 527 Supplying of Sofwares, Server Machines, Air-Conditioning Systems,Xerox Machines, Lamination Machines, Binding Machines, Furniture/Furnishing, Computers, Printers etc as per Department Incharge 528 Supplying of Digital Podium, PTGN 500, Window & 1 LCD, Elecronic Lectern, on site OEM. Warranty 3years, 3GB RAM,4GB ROM as per Department Incharge 529 Supplying of Air Conditioning:-1.8 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 530 Supplying of Black/ White,Printer:- scan-copy all in printer- Branded as per Department Incharge 531 Supplying of CCTV set for floor: 55 LRD display for CCTV. CCTV Camera-1 P based CCTV camera 2TB space with NVR with necessary accessories as per Department Incharge 532 Supplying of 5KVA Inverter online UPS with battery backup 100Mah battery(8 units) as per Department Incharge 533 Supplying of Electrophoresis Apparatus as per Department Incharge 534 Supplying of Bacteriological Incubator as per Department Incharge 535 Supplying of Autoclave as per Department Incharge 536 Supplying of Centrifuge as per Department Incharge 537 Supplying of Rotar Head as per Department Incharge 538 Supplying of Rotar Head 25 as per Department Incharge 539 Supplying of Gel documentation system as per Department Incharge 540 Supplying of Spectrophotometers as per Department Incharge 541 Supplying of compoud Microscope as per Department Incharge 542 Supplying of Trinocular Microscope with camera as per Department Incharge 543 Supplying of Semi-Automated Microtonne as per Department Incharge 544 Supplying of DNA Sequencer as per Department Incharge 545 Supplying of Spectrophotometer as per Department Incharge 546 Supplying of Laminar air flow chamber as per Department Incharge 547 Supplying of Tissue culture rack as per Department Incharge 548 Supplying of PCR Apparatus as per Department Incharge 549 Supplying of Liquid nitrogen cylinder as per Department Incharge 550 Supplying of TLC apparatus kit as per Department Incharge 551 Supplying of TLC Visualizer/documentation as per Department Incharge 552 Supplying of HPLC System as per Department Incharge 553 Supplying of Scientific vortex mixer as per Department Incharge 554 Supplying of Soil Thermometer as per Department Incharge 555 Supplying of Scientific Digital Balance as per Department Incharge 556 Supplying Equipments for workshop,Seminar & Excrusion as per Department Incharge 557 Supplying Equipments for Non-Recurring(Research Equipment) as per Department Incharge 558 Supplying Equipments for Recurring(Chemical & Glassware) as per Department Incharge 559 Supplying of Furniture Bookshelves, Study Tables and Chairs for Readers as per Department Incharge 560 Supplying of Desktop i5 Processor, 7th Generations, 500GB HDD, 4GB RAM, 23.8 inch, LED backlit Monitor Full HD IPS Panel (Brand: HP/DELL) as per Department Incharge 561 Supplying of Headphone with built in microphoneas per Department Incharge 562 Supplying of Printer with scanner (Laser,Colour/B/W)as per Department Incharge 563 Supplying of Scanner(USB,25.2D x 36.8W x 4.3H Centimeters,Slide) as per Department Incharge 564 Supplying of Xerox Machine:- (,Platen cover & Toner, Resolution (DPI):1200 X 1200dpi, Duty Cycle:1.3 Sec) as per Department Incharge 565 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-500mm,Laminating speed-1200mm)as per Department Incharge 566 Supplying of CCTV Camera(Full HD Picture,AI Powered Motion Detection,Infrared Night Vision; 360° Panorama,Talk Back Feature (2-Way Audio)Material Type: Plastic; Included Components: Camera, Power Adapter, Charging Cable, Wall Mounting Kit, User Manual; Specific Uses For Product: Surveillance) as per Department Incharge 567 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 568 Supplying of RS75+ TT7519RS RS 75+ comes with 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management. as per Department Incharge 569 Supplying of Wall Mount Kit(Material: SS,Max loading capacity-60 to 100kg) as per Department Incharge 570 Supplying of Live streaming software Software Software for Live Streaming or Live telecast as per Department Incharge 571 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 572 Supplying of Frieght Transportation of 4K Display,Wall mount kit,Live Streaming software as per Department Incharge 573 Supplying of cctv solutions for Department with 20 cameras(Image Sensor Type-CMOS,Image Sensor Size-0.357 inch,Camera Image Sensing capacity (Picture Mode)-2MP,Resolution-Full HD (1920 x 1080 Pixel)-Day/Night Capable-Yes,IR illumination Range(mtr) 200 Type of Camera HousingDOME CAMERA,IP Camera Yes) as per Department Incharge 574 Supplying of installation and commisioning of CCTV and other computer equipment as per Department Incharge 575 Supplying of 55 Tv for seeing all cctv in HOD room as per Department Incharge 576 Supplying of8 PORT EPBX as per Department Incharge 577 Supplying ofTELEPHONE as per Department Incharge 578 Supplying ofWIRE as per Department Incharge 579 Supplying of CRON BOX as per Department Incharge 580 Supplying ofSWITCHES FOR PORTS as per Department Incharge 581 Supplying of Workststion Table, Chairs, Desktop, UPS as per Department Incharge 582 Supplying of LAN, Switches, Necessary Cabling, Casing Power Supply Port including Cables as per Department Incharge 583 Supplying of Refrigerator(Storage & Interior Description : | Cooling Type ; Frost Free | Display Type ; Thermostat | Shelf Material ; Toughened Glass | Compressor Type ; Reciprocatory)as per Department Incharge 584 Supplying of Microwave(Special Features: Quartz Heater - Concealed Heating. Safer Cooking, Stainless Steel Cavity - More Hygienic. More Durable, Child Lock - Ensures complete safety especially for homes with young children, Interior light)as per Department Incharge 585 Supplying of Washing Machine( Fully automatic 6 kg) as per Department Incharge 586 Supplying of Sewing Machine(Motorised)as per Department Incharge 587 Supplying of Weighting Machineas per Department Incharge 588 Supplying of Blood Pressure Monitor as per Department Incharge 589 Supplying of Oximeter as per Department Incharge 590 Supplying of Gluco Meter as per Department Incharge 591 Supplying of Test Tube & Breakers as per Department Incharge 592 Supplying of RO Water Purifier as per Department Incharge 593 Supplying of Microscope(Student) as per Department Incharge 594 Supplying of Crockery Set as per Department Incharge 595 Supplying of Cocking Utensils set as per Department Incharge 596 Supplying of Cutlery Set as per Department Incharge 597 Supplying of Sofa Set + Centre Table as per Department Incharge 598 Supplying of A.C (Split 2 Ton,3 Star,Twin invertor HD Compressor)as per Department Incharge 599 Supplying of Stabilizer(Automatic Voltage Stabilizer,37.4 x 27.1 x 19.8 Centimeters,5 kg 700 g)as per Department Incharge 600 Supplying of Inveter with battery(Capacity -100AH,Battery Type-Tubular Battery,Warranty-1 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 1 FAN ,28 Light , 8 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 601 Supplying of Desktop Computer with UPS and Computer Tableas per Department Incharge 602 Supplying of Original operating system software window 10 with Antivirus as per Department Incharge 603 Supplying of Printer with scanner (inkjet,Colour/B/W)as per Department Incharge 604 Supplying of Dining Table Set as per Department Incharge 605 Supplying of Camera as per Department Incharge 606 Supplying of Mixer Grinder as per Department Incharge 607 Supplying of Iron as per Department Incharge 608 Supplying of Wall Clockas per Department Incharge 609 Supplying of Whole tailoring Equipments (Local) as per Department Incharge 610 Supplying of Knitting Equipments(Local) as per Department Incharge 611 Supplying of Flower Arrangement Equipments) (local) as per Department Incharge 612 Supplying of Aluminium Set as per Department Incharge 613 Supplying of Plastic Tub as per Department Incharge 614 Supplying of Dustbin(Big) as per Department Incharge 615 Supplying of Basket &Mug as per Department Incharge 616 Supplying of White Table Cloth(Big size)as per Department Incharge 617 Supplying of Wash Basin(Local)as per Department Incharge 618 Supplying of Gas Stove +Cylinderas per Department Incharge 619 Supplying of Curtains(Local) as per Department Incharge 620 Supplying of Floor Mats (Local) as per Department Incharge 621 Supplying of Tube Lightas per Department Incharge 622 Supplying of Fan as per Department Incharge 623 Supplying of Led Projector(New Edition)as per Department Incharge 624 Supplying of Smart Board(specification:white,power consumption<150w ,usage-school,Effective touch-65x46) as per Department Incharge 625 Supplying of Decorative Items(Local) as per Department Incharge 626 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 60 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 15000 ppm,Features-Two-sided printing,Weight-25kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scanner multi as per Department Incharge 627 Supplying of Ceiling Fanas per Department Incharge 628 Supplying of Exhaust Fan as per Department Incharge 629 Supplying of Pedestal Fan as per Department Incharge 630 Supplying of Inveter with battery(Capacity -200AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 14 Hrs Backup- 4 FAN , 8 Light , 14 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 631 Supplying of Wooden Stool(Local) as per Department Incharge 632 Supplying of Wash Basin (Local) as per Department Incharge 633 Supplying of Register (Local) as per Department Incharge 634 Supplying of Stabilizer for ACas per Department Incharge 635 Supplying of Tubelightas per Department Incharge 636 Supplying of Dustbin (Local) as per Department Incharge 637 Supplying of Curtains (Window and Door) (Local)as per Department Incharge 638 Supplying of Door Mat(Local) as per Department Incharge 639 Supplying of Broadband(Wifi)as per Department Incharge 640 Supplying of Furniture Bookshelves, Study Tables and Chairs for attendant and students (30 students at a time) as per Department Incharge 641 Supplying of Wireless mic as per Department Incharge 642 Supplying of Weight Box(100g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 643 Supplying of Weight Box(50g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 644 Supplying of Kymograph :-with smoked paper, smoked Drum, Time marker as per Department Incharge 645 Supplying of Memory Drum :- Electrical operated as per Department Incharge 646 Supplying of Memory Drum :- Hand operated as per Department Incharge 647 Supplying of Metronome :- Mechanical as per Department Incharge 648 Supplying of Porteuz Maze Test as per Department Incharge 649 Supplying of Techisto-scope :- Fall Drop type as per Department Incharge 650 Supplying of Techisto-scope :-Electronic as per Department Incharge 651 Supplying of Verniers chronoscope :- Pendulum Type as per Department Incharge 652 Supplying of Ergograph/Smoke drum /smoke paper varshing tray and varnish :- Hand grip model as per Department Incharge 653 Supplying of Weight 6Kg as per Department Incharge 654 Supplying of Multiplication sheets(100sheet) as per Department Incharge 655 Supplying of Screen:- Wooden as per Department Incharge 656 Supplying of Ravens Progressive Matrices as per Department Incharge 657 Supplying of Weschlers Intelligence scale (Adult) as per Department Incharge 658 Supplying of Cattles 16 PF Questionnaire as per Department Incharge 659 Supplying of Jungs Word Association Test as per Department Incharge 660 Supplying of Thematics Apperception Test as per Department Incharge 661 Supplying of Zeigarnik Effect Test as per Department Incharge 662 Supplying of The Occupational Stress Index(OSI) Scale by A.K Shrivastawa and A.P. Singh as per Department Incharge 663 Supplying of Rorschach Test as per Department Incharge 664 Supplying of Coping Strategies Test by A.K. Shrivastava as per Department Incharge 665 Supplying of Job Satisfaction scale(JSS) by Amar Singh and T.R. Sharma as per Department Incharge 666 Supplying of Job Involvement Scale by A.K. Singh and R. Kapoor as per Department Incharge. 667 Supplying ofOrganizational Climate Scale by Somnath Chatopadhya and K.G. Agarwal as per Department Incharge 668 Supplying of Managerial Aptitude Scale(MAS) by Santosh Dhar, Upinder Dhar and Priyanka Sharma as per Department Incharge 669 Supplying of Employees Motivational Scale by A.K. Shrivastava as per Department Incharge 670 Supplying of Employees Mental Health Inventory (EMHI) by Jagdish as per Department Incharge 671 Supplying of Beck Depression Inventory by Arron Beck as per Department Incharge 672 Supplying of Aggration Scale (AS) by G.P. Mathur and Rajkumar Bhatnagar as per Department Incharge 673 Supplying of Ego Strength Scale by Q. Hassan as per Department Incharge 674 Supplying of Bells Adjustment Iventory by S.M. Mohsin and Shamshad as per Department Incharge 675 Supplying of Marital Adjustment Questionnaire by P. Kumar and kanchan Rohtagi as per Department Incharge 676 Supplying of Sacks Sentence Completion Test as per Department Incharge 677 Supplying of PGI Health Questionnaire N-1 (PGIHQN) by S.K. Verma, N.N. Wig and D. Prasad as per Department Incharge 678 Supplying of Rotters Locus of Control Scal by Anand Kumar and S.N Srivastava as per Department Incharge 679 Supplying of Self Concept Inventory by O.N Srivastava as per Department Incharge 680 Supplying of PGI Social Support Scale by S.K. Verma, P. Kulhara and Ritu Nehraas per Department Incharge 681 Supplying of Emotiobnal Maturity Scale(EMS) by R.R. Trtipathi as per Department Incharge 682 Supplying of Life satisfaction Scale(LSS) by Q.G. Alam and R. Srivastava as per Department Incharge 683 Supplying of PGI Quality of Life Scale by S.K Verma and A.C. Moudgil as per Department Incharge 684 Supplying of Environmental Awareness Scale (EAS) by Haseen Taj as per Department Incharge 685 Supplying of Jatota Test of Group Mental ability as per Department Incharge 686 Supplying of Weinsteins Noise Sensitivy Scale (WNSS)(Shore Samvedi Mapak) by P. Bhatia, S. Mohar and I.S Mohar as per Department Incharge 687 Supplying of State Traight Anxiety Test (STAT) as per Department Incharge 688 Supplying of Xerox Machines (Digital)(Product Specification:Copy | Print | Scan | Fax,Number Of Trays-2,Item Color-Black,Duty Cycle-20000,Print Technology-LaserPrint Speed-25 Paper Per Minute ) as per Department Incharge 689 Supplying of Binding Machine (Product Specification:Capacity-12-15 Sheets,Binding Style-Manual ,Max Binding Thickness<20 mm Max Binding Sheet Width 200-300 mm,Automatic Grade-Semi-Automatic,Weight-5.8Kgs Approx.,Dimension-375x230x150mm Approx.Automation Grade,Hole Size-3x8mm,Paper Size-A4 /Letter /A5 etc,Packaging Weight-375 mm,Handle Type-metal,Packaging Size-375x230x150mm Approx.Adjustable Margin-2.5/4.5/6.5mm,Usage/Application-Comb Binding Method Of Operation-Manual,No Of Punch Holes-21 holes Number Of Punch Slots-21 holes,Size-A4,Number Of Punch Holes-21 holes,Machine Dimension-375x230x150mm Approx.Is It Padded)as per Department Incharge 690 Supplying of Printers(Ink End Sensor-yes,paper storage capacity-100 sheets Paper Input, 50 sheets Paper Output-printing technology ink tank,connecter type-Wi-Fi, USB,special feature-Cost per print - 9 paise (Black & White), 33 paise (Colour) as per Department Incharge 691 Supplying of Furnishing (Book shelves:Study table and chair)as per Department Incharge 692 Supplying of Book Case(for Psychological Tests) as per Department Incharge 693 Supplying of Open Racks as per Department Incharge 694 Supplying of Inveter with battery(Capacity -150AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 2 FAN , 2 Light , 12 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 695 Supplying of Inverter with Battery(Capacity-150,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit Backup Time-5hrs,Battery Condition-New)as per Department Incharge 696 Supplying of Desktop(Product Specification:Hard Drive Capacity-320GB,Operating System-Window,Screen Size-17 inch Processor-i5,Display Type LCD Processor) as per Department Incharge 697 Supplying of Tally sofware (Multi User) as per Department Incharge 698 Supplying of Barcode Machine(Product Specification:Type-Thermal Printers,Max Printing Size-10 IPS,Resolution (dpi)-203dpi Model/Type-Citizen CLS-700,Automatic Grade-Fully Automatic Print Line-1~3 Lines) as per Department Incharge 699 Supplying of Server Machines(Product Specification:Memory-1x16 GB RAM/ Open Bay- 2.5 Hot Swap SAS/ SATA,Power Supply 220 V,Networking Type-LAN,Number Of Ports/Channels-8 USB Port-Yes Processor Speed Intel Xeon Silver 4114 (Deca Core) 2.2GHz Power Consumption 750 W) as per Department Incharge 700 Supplying of LAN connection between 7 computers as per Department Incharge 701 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 30 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 10000 ppm,Features-Two-sided printing,Weight-16.8kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scannercannon image Class MF641CW multi as per Department Incharge 702 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-330mm,Laminating speed-600mm)as per Department Incharge 703 Supplying of Binding Machine (Punches-43 holes,Hole distance-43 holes in A 11 SHEET,Binding sizes:Max 11) as per Department Incharge 704 Supplying of Computers (Processor -AMD Ryzen 3,RAM-8GB,HDD-512 GB,screen size-19.5 inches,Operating system:Windows 11 )as per Department Incharge 705 Supplying of Office Computer (Processor:i5 10th,HDD:1 TB,RAM-4 GB,GT730 4GB Graphics) as per Department Incharge 706 Supplying oflaser printer(Product Specification:Color Output-Black & White,Function-Print | Scan | Copy,Max. Print Speed (Black)-18 ppm Max. Print Speed (Color)-17 ppm,Connectivity-Ethernet,Paper Size-A4,Print Volume-Up to 500 pages/month) as per Department Incharge 707 Supplying of Smart class Board(Power consumption:220-300V,size/Dimension-65,Input type-finger Touch) per Department Incharge 708 Supplying of Double battery(capacity-250Ah,Over current protection) Inverter(Back up time-5 hrs) as per Department Incharge 709 Supplying of Desktop Computers :- HP 23.8-inch FHD All in One Desktop with Alexa Built-in(10th Gen Intel Core i3- 1005G1/8GB/512 GB SSD/Windows 10/MS Office 2019/Natural Silver), 24-dp0816in as per Department Incharge 710 Supplying of Printer, ScannerMulti-Function Direct Wireless Network Laser Printer (Print, copy, scan, Black) as per Department Incharge 711 Supplying of Networking (LAN, leased lines, wi-fi, switches etc.) TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200Mbps Wi-Fi Speed, 5 Gigabit Ports, 4 External Antennas and 1 Internal Antenna WiFi Coverage with Access as per Department Incharge 712 Supplying of Back up support(UPS, Generator, Transformer):-600VA UPS for Desktop/PC/Computers(not for Routers) with Automatic Voltage Regulation as per Department Incharge 713 Supplying of Xerox Machine:- (IR2004 With Duplex, Platen cover & Toner, Resolution (DPI):600 X 600dpi, Duty Cycle:4.3 Sec) as per Department Incharge 714 Supplying of IBM SPSS(Statistics Package Latest Version) as per Department Incharge 715 Supplying of Nvovo(Package) as per Department Incharge 716 Supplying of LCD Projector:- 1)Project movies,images or data from your devices,most effective in dark settings 2)Projector, Lens Cover/Stand, Carrying Pounch, USB Cable 3) Connect via Wi-Fi to Android smartphones and tables or connect HDMI to iPhone or iPad as per Department Incharge 717 Supplying of Projector Screen:- 1)10 Feet x 6 Feet, 133 Dia, 16:9 Format, UHD-3D-4K 2)Comes with FULL HD 1080P 3D and 4K Viewing Technology, Anti UV coating as per Department Incharge 718 Supplying of DTH connection:- 1)HD Set Top Box 2)Recording facility as per Department Incharge 719 Supplying of Television Set:- 1) Smart LED TV-42 inches 2)4K UHD (Resolution:3840x2160) 3)Connectivity-Input:3*HDMI,3*USB 4)Audio:20W output 5) 4K HDR provides exceptional clarity 6)Smartphone connectivity : Photo sharing plus, screen mirroring as per Department Incharge 720 Supplying of as per Desktop:- Intel i7, 8th Gen, 4GB N-Vidia Geforce Graphics card, 16 GB RAM, Monitor, CPU, Mouse, key board partment Incharge 721 Supplying of Multifunction Laser Printer,Scanner, and Copier :- Functionality: Print, Scan,Copy Print Technology : Monochrome Laser Connectivity: Hi-speed USB, Compatible with USB 2.0 Specifications4as per Department Incharge 722 Supplying of Speaker 7.1 surround stereo(Power -100W,Play tme-11 hours,Voice Range-9m) as per Department Incharge 723 Supplying of Digital SLR Camera: 1)EOS full HD movie mode with movie service 2)18 megapixel CMOS)APS-(sensor 3)14-bit A/D conversion 4)ISO 100-12800)EXPANDABLE TO h:25600(5)Dual Lens camera 55-250mm IS II lens 6) Camera battery charger and bag 7)Wide strap USB cable, software CD. as per Department Incharge 724 Supplying of 24.2MP DigitalSLR Camera:- 1)100% Viewfinder Coverage 2)CMOS sensor with impressive high-resolution result 3)Camera battery, charger, and bag 4)Wide strap USB cable, software CD, manual as per Department Incharge 725 Supplying of Quark express as per Department Incharge 726 Supplying of Adobe Suite(CS6 Master Collection) as per Department Incharge 727 Supplying of Cool Edit Pro as per Department Incharge 728 Supplying of Turnitin as per Department Incharge 729 Supplying of Sound Forge as per Department Incharge 730 Supplying of 18-55mm normal lens as per Department Incharge 731 Supplying of 55-250mm Zoom lens as per Department Incharge 732 Supplying of 18-135mm lens as per Department Incharge 733 Supplying of 35mm prime lens as per Department Incharge 734 Supplying of 80mm macro lensas per Department Incharge 735 Supplying of Tripods as per Department Incharge 736 Supplying of DSLR:- 1)Powered by NP-F570 InfoLithium rechargeble battery pack 2)Records to MiniDV tape stock 3)16:9 widescreen recording 4)3CCD video camera 5)12x optical zoom lens 6)Records to MiniDV tape stock as per Department Incharge 737 Supplying of:- 1)3CCD video camera 2) Crystal Engine 3)Shoulder -Type Design 3)One Touch Navigation 4)Manual Focus Ring 5) 0 lux colour light view 6)10x optical zoom 6)500x digital zoom 7)Super image stabilizer 8) DV IN/OUT Terminal 8)5-mode programme AE: sports, portrait, low light, spot light, and surf &snow 9)SP/I.P recording 10)Back light compensation 11) Cinema mode )16:9 aspect ratio( 12)Infra-red remote controller as per Department Incharge 738 Supplying of Tripods:- 1)3-way head with adjustable pan 2)Steady rubberized legs 3)Multipurpose head with quick release 4)Multipupose head for DV cameras 5)Made from High Grade Aliminium Alloy 6)Quik flip leg locks 7)Fluid pan&tilt movement 8)Quik release plate& Bubble Level as per Department Incharge 739 Supplying of i-Mac(Product Specification,Storage Capacity-256 GB Display-24 inch,Memory Size-256gb ssd,assembled Product Dimensions L X W X H,461 mm x 547 mm x 130 mm, 4.48 kg Color-Silver & Blue,Graphics-8_core GPU,Video Support And Camera 4.5K,Bluetooth-Bluetooth 5.0,Weight-4.48kg,Operating System-macOS Big Sur,Processor- M1Echip,Line Voltage-100-240V AC) for Video Editing as per Department Incharge 740 Supplying of Photographic Design Flash Bender-Small Reflector:- 1) Make a bounce flash reflector, gobo, or snoot 2)Packs flat/great for travel 3)Attaches quickly & securely 4)Adjustable to fit all popular brands of accessory flash 5)For on-camera or off-camera flash as per Department Incharge 741 Supplying of Rim Collapsible softbox Diffuser with Rim :-1)Softbox 36 inches/90 Centimeters with Grey Rim and Bowens Mount, Portable and Quick Folding Softbox Diffuser for Photography Speedlites Flash Monolight 2)for 660 LED Panel-Outer 16.3x6.5 inches,Inner 9.8x8.7 inches Collapsible Light Reflector 3)with Stap Attachment and Carrying Bag for Photo Studio Portrait Video Shooting as per Department Incharge 742 Supplying of Handheld Camera Stabilizer with Quik Release for DSLR:- 1)Light weight, handheld video image stabilization 2)FlyCam 3000 video cam stabilizer accepts camera upto 3.5kg/7.7Ibs. 3)Easy attach a small LCD monitor with Flycam 3000 cam stabilizer when needed. 4)Precision Aluminum made 5)23 tall and just 207 Ibs without counter balance disc. as per Department Incharge 743 Supplying of Green/Blue matte screen )Chroma key( :- 1)8x12 ft Blackboard, perfect for television, video production and digital photography. 2)Rod pocket on each top edge allows to be draped or hung. 3)Finishing along all edges to prevent tears. 4)Made of 100 %pure cotton, good vertical sense and durable as per Department Incharge 744 Supplying of Professional Grade Backdrop Cum Light Stand of 8 Feet Height:- 1)Photography Backdrop Stand Kit. 2)Stand of 8 Feet Height 3)8x12 ft Blackboard, perfect for television, video production and digital photography. 4) Package Contents; 1Pcs White Backdrop , 1Pcs Black Backdrop and Set of Black Backdrop stand. 5)Bag to carry as per Department Incharge 745 Supplying of Video Mixer (Four Channel Digital Video Mixer With Effects, including installation and training):- 1) four channel video mixer by incorportating HDMI inputs/outputs, USB streaming, HDCP support, built-in touch multi-viewer, and audio embedding . 2)(3Input)SD HDMI/Composite +(1Input) Up to1080p HDMI/RGB/Component/Composite. 3) PGM Output) Up to 1080p HDMI + RGB/Component +Composite +(PVW Output)PVW/Multiviewer(. 4)480p/576p Progressive internal processing 5.) Built-in multi-viewer ith touch control 6). Built-in frame synchronizers on all inputs 7). Scalers on CH 4 and Output 8). 259 Transitions 148 Effects 9). HDCP Compliant 10) Audio Embedding 11) Audio Mixer & Delay -up to 4 Fframes 12) USB Streaming Out for web-streaming 13) Video Processing:4:2:2 )Y/b/Pr(8 bits)Internal Processing :480/59.94p when set to NTSC, 576/50p when set to PAL( 14) Input Formats :HDMIVideo: INPUT 1 to3 : reqyires 720x480/59.94p )when set to NTSC( 576/50p ) When set to PAL(15) Input Formats : HDMI and Component Video : INPUT 4:480/59.94p, 720/59.94p, 1080/59.94i, 1080/59.94p )when set to NTSC (576/50i, 576/50p, 720/50p, 1080/50i, 1080/50p )when set PAL( as per Department Incharge 746 Supplying of Studio Condenser Microphone :- 1)Professional, large-diaphragm condenser microphone for unsurpassed audio quality 2) Idea as Mian and support microphone for studio and live applications. 3) Cardioid pickup pattern for outstanding sound source separation and feedback rejection 4)Pressure-gradient transducer with shock-mounted capsule. 5)Ultra-low noise, transformerless FET inputeliminates low-frequency distortion. 6) LED indicates phantom power operation. 7)Swivel stand mount and transport case included. 8)Ultra-rugged construction with metal die-cast body 8)Gold-plated 3-pin XLR output connector for highest signal integrityas per Department Incharge 747 Supplying of Digital Monitor/Speaker System(in Pair) :- 1)Two-way active monitor system for multimedia workstations and keyboard monitoring 2)High-power woofers and tweeters powered provided a linear frequency response 3)optical and coaxial inputs to directly connect digital audio sources via S/PDIF interface 4)Two stereo analogue inputs featuring 1/8 TRS and stereo RCA connectors can be used simultaneously or mixed with a digital stereo source 5)Features 1/4 TRS headphone connector with auto-mute function easily accessible from the front panel 6)2x Stereo Anaog Inputs )TRS and Stereo RCA Connectors( 7) 1/4-inch TRS headphone connector with Auto-mute Loudspeaker Function 8)1/8-inch TRS and Stereo RCA connectors as per Department Incharge 748 Supplying of Lapel Clip-on Microphone for DSLRs Camcorders Video Cameras and Iphone Smart Phone :- 1)Omni directional lavalier microphone, designed for Smartphones, DSLR, Camcorders, Audio recorders PC etc, perfect for video use. 2) With Omni pickup pattern, for full 360A coverage, 3) minimum 6-meter )20(cable with 3.5mm 4-pole gold plug for smarty phone connection as per Department Incharge 749 Supplying of Micophone Stand:- Steel stands for hand held microphones in studio with a base supporting system as per Department Incharge 750 Supplying of MP3 Digital Voice IC Recorder LCD :- 1)Digital Voice IC Recorder 2)LCD Screen 3) 23hrs life with 4GB Memory as per Department Incharge
Contract Date: Jun 17, 2026 Contract Value : 78.07 Crore
Government Departments No of Bidders 9
10.
Agriculture #10079043 Price Bid
Tender For Supply Of Veterinary Instrument / Equipment / Chemicals / Re Agent / Media Supply Of Veterinary Instruments / Equipments / Chemicals / Reagents / Media , Hematology Auto-Analyzer , 5 Part Veterinary Hematology Analyzer For Veterinary Use Only And Not For Human, With Feature Of Direct Mode To Select The Canine, Feline, Equine, Bovine, Ferret, Gerbil, Rabbit, Pig, Mini Pig And Guinea Pig, Goat, Sheep, Llama, Alpaca, Camel, Dolphin, Based On Laser Flow Cytometry, Optical Fluorescence And Laminar Flow Impedance Technology To Measure All 26 Parameters: Red Blood Cell – Rbc, Hematocrit - Hct%, Hemoglobin - Hgb, Mean Corpuscular Hemoglobin Concentration - Mchc, Mean Corpuscular Volume – Mcv, Mean Corpuscular Hemoglobin – Mch, Red Cell Distribution Width – Rdw, Reticulocyte Count % , White Blood Cell – Wbc, Neutrophils - % And Neutrophils Absolute Numbers, Lymphocytes - % And Lymphocytes Absolute Numbers, Monocytes - % And Monocytes Absolute Numbers, Eosinophils - % And Eosinophils Absolute Numbers, Basophils - % And Basophils Absolute Numbers, Platelets – Plt, Mean Platelet Volume – Mpv, Platelet Distribution Width – Pdw, Plateletcrit Value – Pct, Requiring Less Than 30 ?L Of Anticoaguled Whole Blood, With Other Important Parameters Reticulocyte Hemoglobin, Band Neutrophil And Reticulocyte Count Also, Also To Report For Other Parameters Like Nucleated Rbc, Band Neutrophil Etc If Presence Suspected In Sample, Requiring Two Reagent Kits One External And One On Board, With Results In Two Minutes, Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Standby Mode, External Printer Interface Facility To Get The Printouts With All Parameters Including Dot Plot, Integrate With The Laboratory Information Management System For Analyzer Operation As Well As Patient Information With Patient Records, Us Fda / Ce / Iso Approved , Trinocular Microscope , Trinocular Microscope: Head: Trinocular 30 Degree Inclined W / Photo Tube & C-Mount Eyepieces: Cfi E 10X ( 20Mm ) Objectives: Cfi E Plan Achromat 4X, 10X, 40X, 100X Oil Stage: Mechanical Stage With Slide Holder Condenser: E2 Abbe Condenser N.A. 1.25, Aperture Diaphragm With Position Guide Markings For Respective Cfi E Plan Objectives Focus: Coaxial Coarse / Fine Focus Controls Illumination: Led Illumination Misc: Dust Cover, Power Cord, Manual Warranty: 5 Year Mechanical And Electrical Camera Specifications: Screen ( Optional ) Mountable 11.6 Retina Display Screen ( Hardware Included ) Resolution ( Live ) : 1920X1080 - Captured 5 M.P. Sensor: 1 / 2.5 ( 0.5X C-Mount Recommended ) ; Aptina Mt9p031 Frame Rate: Hdmi ( 30Fps ) ; Usb 2.0 ( 15Fps ) Image Capture: High Speed Sd Card ( 4Gb ) Video Capture: Hdmi: 1080P, 30Fps To Sd Card Usb 2.0: 1080P, 15Fps To Pc Or Mac Exposure Time: 0.001 Sec - 10.0 Sec White Balance: Auto Settings: Gain, Gamma, Saturation, Contraction Built-In Software: Cloud 1.0 Pc Imaging Software: Captavision Imaging Software ( For Pc Only; Mac Os Not Supported ) Advanced Camera Controls: Live / Still Image Measurement And Annotation, Flat Field Correction; Extended Depth Of Focus ( Focus Stacking ) ; Image Stitching; Hdr ( High Dynamic Range ) Function Image Types: Jpeg, Bmp, Tiff And Raw Output Modes: Mode 1: Usb 2.0 / Mode 2: Hdmi System Compatibility: Windows Xp, Vista 7 And 8, And 10 ( 32 Or 64-Bit ) Mac Os X ( For Image Transfer To Mac Os X Only ) System Requirements: Intel Processor ( Core 2 Duo Or Higher ) ; 2Gb Memory Or More; Usb 2.0 Hi-Speed Port Power Supply: Dc12v / 1A , Reinforce Protection Glass 11. Stainless Steel Darkroom 12. 10 Positions Filter Wheel To Be Supplied With The 590Nm Interferential Filter With The System For Ethidium Bromide Application 13. Auto-Exposure, Auto Focus And Automatic Illumination Control 14. The Field Of View Should Be Approximately 21X26 Cm At The Uv Transilluminator ( Slide-Out, Uv 312Nm Excitable ) Level. The Transilluminator Should Be Slide Outdesign. 15. The Uv Transilluminator Is To Be Stained Free Compatible, As Well As For The Most Common Dna / Rna Dyes 16. The System Should Be Upgradable In Future With Up To 6-8 Excitation Channels In The Uv And Visible Area For A Large Array Of Applications Such As Dna Or Rna Gels, 1D Protein Fluorescent Gels, Stain Free Gels 17. A Complete Library That Contains The Excitation And The Emission Spectra Of The Main Fluorophores Used In Modern Molecular Biology Laboratory Should Be A Built-In Feature Of The Software. It Also Should Suggest The Best Possible System Configuration In Terms Of Light Source Excitation, Emission Filter And Sensitivity Level Of Applications To Ensure Reproducibility And Ease Of Use. 18. White Light Conversion Plate Should Be Supplied 19. Facility Must Be Available To Upgrade With Blue Conversion Screen For The Excitation Of The Syber Green And Of The Sybr Safe 20. Suitable Branded Desktop Computer Must Be Quoted As Optional 21. Service Engineer Should Be Available At Bhubaneswar 22. Warranty- 1 Year , Rnase Jap , Steri Sweep Molecular Grade , Petridsih Disposable, 100Mm , Bq Rapid Test Kit , Goat Pox Virus Antigen Rapid Test Kit , Hs Rapid Test Kit , Ppr Virus Antigen Detection Rapid Test Kit , Rd Virus Antigen Detection Rapid Kit , Rotheras Mixture Lr , Super Script™ Iii Platinum™ One-Step Qrt-Pcr Kit Catalog Number:11732020 Molecular Grade , Cryo-Container 3 Litres , ( Capacity-3 To 4 Lts Of Ln2 With Static Evaporation Loss Rate Of 0.135 Litres Per Day At Stp, 6 Canisters With Od 38 Mm, Height 120Mm. The Level Of Ln2 From Bottom Should Be About 20Cm. The Neck Diameter Should Be 50Mm. The Container Is Meant For Private Ai Practitioners & Should Be Sturdy ) , Cryo-Container 35 Litres , ( High Strength Aluminium Alloy Liquid Nitrogen Container, Neck Diameter About50mm, Loss Mass- 0.29 Litre Per Day, Static Holding Time-123 Days ) , Frozen Semen Straw Lifter-10 , Stainless Steel, L Shaped, Designed To Lift Semen Straws With Vertical Serrationsmade At The Tips ( 10’’ ) , Kit Bag, Nylon Fabricated Materials, Water Proof With Good Quality Chain Having Two Main Inside Partitions & One Outsidebox Pocket, With Hanging Handle & Back Carrying Belt, 12 Height, 21 Length, 7 Width, Able To Carry 10 Kg Weight , Burdizzo Castrator For Bull Calf, Made Up Of Stain Less Steel ( 19 Length ) For Bull Calf. Burdizoo Pattern Castrators For Large Animals Consist Of Two Jaws ( Upper Jaw And Lower Cord Stop Jaw ) With Two Levers Coupled With Nuts. Material Carbon Steel Length ( Total ) 19” Width Of Upper Jaws 75 Mm + / - 2 Mm Lower Jaw ( Cord Stop Jaw ) Cord Stop Of 5-8 Mm Ht. On Both Sides ( The Gap On Either Side Between The Upper Jaw And Lower Jaw ( Having Cord Stop ) Should Range Between 1 To 1.5Mm ) Other Requirements:- 1. Tenderer For Imported Castrators Should Submit Proper Letter Of Authority From Their Principals. 2. The Offered Product Should Be In Indian Market For At Least 2 Years. 3. List Of Actual Users To Whom Same Brand Is Supplied Should Be Submitted With Copy Of Ratecontract / Supply Order Etc. 4. The Castrators Should Be Guaranteed For Satisfactory Performance For A Period Of Minimum One Year From Date Of Supply, During Which The Bidder Shall Be Liable To Be Replaced The Castrators At His / Herown Cost, If Any Complaints Are Received From End User. 5. Castrator Should Not Leave Any Gap Between Upper And Lower Jaw During Castration. 6. The Castrator Should Be Supplied Along With Spanner. With The Help Of Spanner All The Nuts Ofcastrators Shall Be Alternatively Loosened And Tightened Five Times And Neither Nuts Nor Jaws Ofspanner Shall Show Any Sign Of Damage Or De Shape. 7 . Name Of Manufacturing Company Should Be Permanently Embossed / Etched On The Body Of Castrator. , Cryo-Container 50 Litres , ( Liquid Nitrogen Container 50L, Neck Diameter About50mm, External Diameter 500Mm, Height 790Mm, Loss Mass- 0.37 Litre Per Day, Static Holding Time-134 Days ) , Digital / Electronic Semen Thaw Unit 475 Ml Capacity ( For Bovine ) , Made Up Of Stain Less Steel, Thermoflax Model With One Side Handle, With Digital Display Temperature, Having A Plastic Canister Inside To Keep / Lift The Semen Straw, With A Power Cable To Heat, Dimension ( Lxwxh ) ( 4.7 X 4.2X 9.5 ) , Weight ( Empty ) -610G, Power-74W, Rated Frequency- 50Hz, Rated Voltage-220V Ac, Capacity-475 Ml , Frenchmini Empty Straw, Pvc Straw Of Different Colours.Pack Of 2000 Straws ( 0.25Ml ) . Total Length 133Mm + / - 0.25 0.5Mm, External Diameter 1.99Mm , Internal Diameter 1.63Mm, 0.25Ml -Low Absorption Alpha Type With Flouroscent Plug Technology For Precise Filling And Safety , Cryo Gloves , Can Withstand To Retrieve The Frozen Semen Straw From Liquid Nitrogencryo Container , Portable Veterinary Ultrasound Machine , 1. It Should Be Portable Veterinary Touch Screen Color Doppler Ultrasound Unit Having Minimum12” Lcd Led Backlit Screen Size And Should Not Be Weighing More Than 4 Kg Includingbattery. 2. It Should Be Meant Forcanine, Feline, Equine, Bovine, Lama, Pig, Sheep And Others And Should Have True Veterinary Software 3. It Should Have Intuitive Interface, Touch Pad And Touch Key Board 4. It Should Have Touch System To Select Imaging Modes Like: B, B+B, Power B, B+M, M, Cfm Andpw . 5. The Machine Should Offer Dual Cfm- B / Cfm, Adjustable Region Of Interest ( Roi ) , 6. Itshould Offer Image Orientation From Left – Right And Up & Down 7. It Should Have Battery Backup For Minimum 3 Hours And Charging Time Should Not Be More Than 3 Hours 8. It Should Have Minimum 2 Usb Connectors, Wi-Fi Compatibility To Send Images To Ipad And Other Smart Devices , Basic Dicom, Stereo Sound And Bluetooth Compatibility . 9. It Should Have Digital Touch Control For All The Operational Features Like- Adjustment Of Tgc, Gain, Brightness & Contrast, Image Orientation, Focus, Freq, Depth And Dynamic Range. 10. It Should Display Mi & Ti Indexing On The Screen By Default And Should Be In The Permissible Limit As Per Fda And Overall Safe. 11. The Machine Should Be Able To Generate Report Of The Animal Combined With Images To Further Send Through Digitally In Multiple Forms 12. The Ultrasound Machine Should Be Offering Absolutely Very High Image Quality Hence Should Be Using Digital Dual Beam Former And Computing And Should Be Using Minimum 128 Reception Channels And Around 60 Emission Channels Or More. 13. It Should Have 500Gb Hard Disc Capacity 14. The Machine Should Offer Both Portrait And Landscape Imaging View 15. The Machine Should Be Having Hdmi And Wi-Fi Compatibility 16. It Should Have 256 Grey Scale 17. The Machine Must Be Able To Take The Voice Command Of The User To Adjust Depth, Probe Frequency, Focus, Gain And Freeze In B Mode 18. It Should Be Provided With One Micro Convex Probe Having 5-7.5Mhz Frequency Suitable For Small Animal Abdomen 19. It Should Be Offered With Endo Rectal Probe Having Frequency Of 5-10Mhz And 600 Mm Footprint Of The Scanning Face Of The Probe For Large Animal Reproduction And Fetal Sexing On Animal. The Endo Rectal Probe Should Be Atleast 2.5 Meter Long. 20. It Should Have Digitized Tgc Upto 8 Adjustable Zones And Should Be Adjustable With Touch Only 21. The Ultrasound Machine Should Be Fully Compatible For Opu Operation On Animal And Offer Ergonomics Applications To Carry Out Ovum Pickup Successfully With Compatible Devices For Future Procurement. 22. The Machine Should Be Supplied In A Hard Plastic Carry Case Having Proper Housing For Machine And Accessories. 23. The Machine Should Have An Ergo Mount Adaptor For Mounting The Machine On Certain Device / Stand. 24. It Should Have Patient, Hospital And Reporting Format. 25. The Machine Should Be Ce Marked. 26. It Will Be Inevitable On The Part Of The Supplying Company To Arrange And Provide Extensive Clinical Training For Two Days On Animals To Teach About Topographic Anatomy Using Ultrasound And Different Applications Of The Machine For Its Ergonomic Purpose By A Qualified Veterinary Specialist At A Common Venue. 27. The Principal Maufacturing Company Of Offered Product Should Have Their Direct Office And Service Centre In India With Good Strength Of Engineers. 28. The System Offered Should Be Warranted For At Least One Year. , Cryo Can -1.5 Ltr, Capacity 1.5Lit, Material : Aluminium , Static Evaporation Rate : 0.05 Lit / Day To 0.1 Lit / Day , Cryo-Container 55 Litres , Capacity 55Lit, Material : Aluminium , Static Evaporation Rate : 0.43 Lit / Day To 0.45 Lit / Day , Jumbo-12, Capacity 47Lit, Canister : 11, Material : Aluminium , Static Evaporation Rate : 0.35 Lit / Day To 0.4 Lit / Day , Liquid Nitrogen Transfer Hose Pipe ( Non Insulated ) -5 Mt, 1 / 2 Inch Nb 5 Mt Long Flexible Non- Insulated Vacuum Hose Along With Gaskate. , Wide Mouth Container ( Storage Vat Of Frozen Semen Straws ) -390 Liters, •Wide Mouth Container Made Of Non-Magnetic Stainless Steel Of Approximate 390 Ltrs Capacity. •Should Have Capacity To Store More Than 3.9 Lacs Straws Of 0.25 Ml ( With Canisters ) •Static Holding Time: Minimum 30 Days •Internal Diameter: Approx. 770 Mm •Empty Weight: Not More Than 200 Kg •Total Weight ( Including Samples ) : Not More Than 520 Kg •Total Height: Max. 1320 Mm •Daily Evaporation Rate Should Be Less Than 10 Ltr. / Day . •Should Be With Temp. Indicator, Low Temperature Alarm, Level Indicator, Low Level Alarm Indicator. •Should Have Option Of Auto Filling & Interface For Remote Monitoring •Heavy-Duty Casters To Provide Mobility Within The Lab. •The Equipment Must Be Quoted With One-Year Warranty Including Installation. The Concern Should Have Experience Of Installing Successfully At Least ( 03 ) Five Such Systems In Cmu Graded Semen Labs In India, For Which Necessary Documents Must Be Attached. The Satisfactory Working Report From The User Also To Be Attached. , 5 Ply Corrugated Card Board Box, Size-355Mm X 305 Mm X30mm , Ss 316 Storage Tank, Capacity-200Liters, With Accessories Ss 316 Storage Tank, Capacity-200Liters, With Accessories •M.O.C Of All Contact Parts : Ss 316 •M.O.C Of All Non-Contact Parts : Ss 304 Type Of Tank : Torispherical Dish End Vertical Tank •Dia: 700Ø / Shell Ht.: 550 Mm •Shell / Dish Thickness: 4 Mm Steam Heating Jacketed Tank Dia.800Mm X 4Mm Thk. •Shell Thickness: 4 Mm - Ss 304 •Tank With Heat Insulation Jacket With Rockwool Insulation - Dia. 900 Mm •Shell Thickness : 2 Mm - Ss 304 •Tank Internal Surface Mirror Polished. • Volume Sensor-1 No • Ph Sensor-1 No Accessories •Temperature Sensor - 1 No. •Steam Inlet Valve3 / 4 - 1 No. •Steam Trap Assembly3 / 4 - 1 No. •Steam Safety Valve With Pr. Gauge 1 No. •Control Panel- 1 No. •Ss 316 Diaphragm Valve, Size:1 -2 Nos •Vent Filter With Electrical Heating, 10 Long 0.2 Micron P7 Pp Cartridge-1 No. •Sight Glass Assembly3- 2 Nos •1 Tc Compound Pr. Gauge With 4 Dial, -1 To 10 Bar Pressure- 1 No. , Non Invasive Multiplexed Biomass Sensor System, Automated, Continuous, Real Time, Multi Vessel Biomass / Od Monitoring With Working Volume Done To 10 Ml, Biomass Sensitive Range Less Than 0.01 To Greater Than 600 Od Units, 12 Mm Diameter , Peristaltic Pump-201Vnotor-Stepper With Motor Torque-10Kg, Rpm- 1 To 200, Tube Size- 1 To 8 Mm, Flow Rate- 0.8 To 1800Ml / Min, Discharge Pressure - 2Bar, Maximum Discharge Height- 10 Litres, Dimension- ( L-325 X W-170 X H-250 ) Mm , Peristaltic Pump-401Vnotor-Stepper With Motor Torque-1 / 6 Hp, Rpm- 20 To 240, Tube Size- 8 To 19 Mm, Flow Rate- 250 To 20000Ml / Min, Discharge Pressure - 3Bar, Maximum Discharge Height- 30 Litres, Dimension- ( L-500 X W-250 X H-400 ) Mm , Absorbent Cotton Ip 500Gm Pkt ( Each ) , 500 Gm, Absorbency Not More Than 10Sec. , Cover Slip -Glass / Disposable, , Circular / Rectangular-100 Nos / Pkt ( 100 Nos ) , Cover Slip -Glass, Optically Clear, Distortion Free Surfac, Circular & Rectangular-100 Nos / Pkt , Cryovial 1.8Ml / 4.5Ml, Pp, Pkt Of 100, Material-Plastic , Disposable Needle-Strile 18 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Needle-Strile 20 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Needle-Strile 22 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Syringe With Needle-Sterile, Graduated, 10Ml With 18 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 20Ml With 18 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 2Ml With 20 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 5Ml With 18 G Needle Packed Individually ( Each ) , Gauze Cloth , 100% Cotton, 90Cm X 16 Mtr ( Each ) , Gauze Cloth 90Cm X 16 Mtr Bandage 10 Cm X 3 Mtr ; 15 Cm X 3 Mtr , Haematocrit Tubes Acc. To Wintrobe, Soda Lime Glass, Straight Rim, Round Bottom, Double Numbered Scale In Red / White Colour, 105 Mm Subdivided In 1 Mm, Outside Diameter Approx. 6.5 Mm, Inside Diameter Approx. 2.9 Mm, In Cartons Of 20 Pcs. , Non -Absorbent Cotton Ip.500Gm Pkt ( Each ) , Pop Bandage 6 , Roller Bandage 10Cm X 3M, Gauze / Cotton, Pack Of 10 ( Pkt Of 10 ) , Roller Bandage 15Cm X 3M, Gauze / Cotton, Pack Of 10 ( Pkt Of 10 ) , Ph Paper , With Universal Indicator 1 To 14 , Glass Slides, Microscopic -Optically Clear, Distortion Free Surface , Bunsen Burner, Gear Type: Natural Gas, Material: Stainless Steel, Btu Output: 1200 Per Hour, Inlet Tube Od: 0.4375 Inches, Height:6 Inches , Digital Balance, Base On Electromagnetic Force Compensation Technology To Match The Highest International Standards . High Integrated Weighing Scale.Internal Adjustments Caliberation: Lb- C3 Type Caliberation. Motorized Internal Built In Weight Caliberation.Lb-C Series. Psas Fully Automatic Time And Temperature Controlled Internal Adjustments.Lb-C Series. Automatic External Caliberationlb-C / Lb Series Balance Protection.Smart Keystop Calliberation. Menu Lock ( Settings Password Protection ) . Overload Protection.Ip54protection Class. Overview: Display : Lcd High Contrast Display With Led Back Light. Large Glass Draft Shield With 3 Sliding Doors For Easy Acess To Items Being Weighted Key Pad Cover With Plastic Protection.. Tare Key Left / Right Sidefor User Friendly.Bubble Level Indication With Adjustableleg Uniform Surface Level.Balance Is Equipped With Rs232 Ouput Interface Connect Balance Pc Or Statistical Printer.Windows Direct Communication.. Usb Interface Optional. High Grade Materialconstruction Protects Against Chemicals And Rough Handling.Application: Piece Counting, Check Weighing , Percentage Weighing, Tantalization., Animal Weighing, Density Determination, Statistics, Custom Weighing Unit Formulation, Below Weigh Hook . Internal Caliberation: Model: Lb224c- Max- 220Gm, D-0.1 Mg, Pan Size-90Mm, Analaytical Balance:220Gm; Lb224c. External Calliberation:Lb224-220Gm D- 0.1 Mg, Pan Size 90Mm , Ai Tray, Stainless Stell 55-60Cm X25-30 Cm , Calf Puller Consist Of Precision Threaded Shaft Of 76 Long In Two Part With Breech Spanner For Pelvic Bones .Frictionjack Fittingwith Leg And Tractionbelt For Smooth Calf Delivery , Spay Snook Hook, Stainless Steel, Blunt 8 Inch Convex , Goblet Holding Forcep ( 18 ) , Stainless Steel, Lock Types Goblet Holding Forcep , Bipolar Thermocuttery Unit, Microcontroller Based Isolated Electrosurgical Generator Having Both Monopolar And Bipolar Outputs Designed For All Surgical Procedures, All Cut Modes Should Be Able To Adjust Output Power Depending On Tissue Density By Less Than 15% Or 5W, Whichever Is Greater. Should Have Three Coag Modes With Maximum Power Of 120W, It Should Have Three Bipolar Modes With Maximum Power Of 70W, The Unit Should Have Two Hand Switching And Two Footswitch Monopolar Outputs And One Hand Switching And Foot Switching Bipolar Output, The Unit Should Have Individual Digital Display Of Power For Bipolar, Monopolar Cut And Monopolar Coag. The Unit Should Not Have Rf Leakage Current More Than 150Ma. The Unit Should Not Have Rf Leakage Current More Than 150Ma. Two Years Of Comprehensive Warranty Including Bulbs Should Be Provided Along With Technical Support. It Should Follow International Safety Standard And Requirement With Ce Certification Or Usfda Approval. Operating And Service Manual Should Be Supplied. , Air Drill, High Speed Air Handpiece: 360, 000 Rpm Variable High Speed Handpiece, Low Speed Air Handpiece: Up To 20, 000 Rpm For Slow Speed Control., Complete Prophy Starter Kit, 3-Way Air Water Syringe: Allows The Operator The Ability To Rinse The Operative Site With A Stream Of Water Or Mist Or Dry / Blow Debris With A Stream Of Air. Foot Pedal Control: The Foot Switch Is A Durable Chrome-Plated Pedal. By Pressing Harder On The Foot Switch It Will Deliver More Power To The High Speed Handpiece Controlling The Speed Easily. , Burdizzo Castrator Small, Burdizoo Pattern Castrators For Small Animals Consist Of Two Jaws ( Upper Jaw And Lower Cord Stop Jaw ) With Two Levers Coupled With Nuts. Material For Small Animals:Material Carbon Steel Length ( Total ) 220-230 Mm Width Of Upper Jaws 42 Mm + / -2Mm Lower Jaw ( Cord Stop Jaw ) Cord Stop Of 5-8 Mm Ht. On Both Sides ( The Gap On Either Side Between The Upper Jaw And Lower Jaw ( Having Cord Stop ) Should Range Between 1To 1.5Mm ) Other Requirements:- 1. Tenderer For Imported Castrators Should Submit Proper Letter Of Authority From Their Principals. 2. The Offered Product Should Be In Indian Market For At Least 2 Years. 3. List Of Actual Users To Whom Same Brand Is Supplied Should Be Submitted With Copy Of Ratecontract / Supply Order Etc. 4. The Castrators Should Be Guaranteed For Satisfactory Performance For A Period Of Minimum One Yearfrom Date Of Supply, During Which They Shall Be Liable To Replace The Castrators At Their Own Cost, If Any Complaints Received From End User. 5. Castrator Should Not Leave Any Gap Between Upper And Lower Jaw During Castration. 6. The Castrator Should Be Supplied Along With Spanner. With The Help Of Spanner All The Nuts Ofcastrators Shall Be Alternatively Loosened And Tightened Five Times And Neither Nuts Nor Jaws Ofspanner Shall Show Any Sign Of Damage Or De Shape. 7. Name Of Manufacturing Company Should Be Permanently Embossed / Etched On The Body Of Castrator. , Drenching Gun, Usage / Application - Drenching For The Entire Herd, Automation Grade / Semi-Automatic, Finishing- Color Coated, Capacity- 23 Ml , Endo Tracheal Tube No 06, Size-6 Inch, Application- Hospital, Steribility- Sterile, Material- Pvc, Color- White Transparent , Endo Tracheal Tube No 08, Size-8 Inch, Application- Hospital, Steribility- Sterile, Material- Pvc, Color- White Transparent , Et Tube ( Size 2-12 ) , Size- 2Mm To 12 Mm, Cuff Type- Cuffed , Hartman Ear Forcep, Composition: Stainless, Customer Segment: Hospitals, Surgery Centers & Tissue Banks, Finish: Satin, Grade: Or, Item Type: Forceps, Length - Working ( Mm ) : 64, Length 1 - Tip / Jaw ( Mm ) : 6, Physician / Developer: Hartmann, Shape: Straight, Therapeutic Specialty: Otology, Usage: Reusable, Width 1 - Tip / Jaw ( Mm ) : 1.5 , Laryngoscope, Battery Handel, Throat Cannual, With 2 Attachment For Anesthesia. , Pm Kit, 1 ) Amputation Saw, Stainless Steel 2 ) Wire Saw With Handle, Stainless Steel ( Gigil Wire Saw ) 3 ) One Spare Wire For Wire Saw4 ) Post-Mortem Knife 5 ) Full Hand Gloves, Size-6 & 7 6 ) Post-Mortem Gloves, Latex, Size-6 & 77 ) Bone Hammer8 ) Bone Chisel9 ) Post - Mortem Scissor, Stainless Steel10 ) Scalpel, Stainless Steel11 ) Allis Tissue Forceps, Stainless Steel 1512 ) Sharpening Stone13 ) Probe, Stainless Steel14 ) Scissor, Dressing, Stainless Steel15 ) Bowel Scissors, Stainless Steel16 ) Retractor Four Prong Sharp 17 ) Retractor Four Prong Blunt 18 ) Dissecting Forceps, Toothed, Stainless Steel 19 ) Bone Holding Forceps, Stainless Steel 20 ) Abscess Knife, Stainless Steel22 ) Bone File23 ) Measuring Tape 24 ) Vice With Two Adjustable Jaws Made Of Iron For Cutting Heads Of Animal. , Small Animal Dental Instrument Set, D107 , Suture Cutting Scissor, Size- 6 Inch, Material- 304 Grade Stainless Steel, Material Grade- Aisi Grade, Automation Grade- Manual, Handle Type- Finger Ring , Opthalmoscope, Technical Specifications Of Opthalmoscope: 1. Dimensions: 5.12” L X 1.40” W X 3.75” H Without Eyecup ( With Eyecup: 1.45” L ) 2. Weight: 48 Lbs Without Eyecup; 50 Lbs With Eyecup 3. Focusing Range: -20 To +20 Diopters Other Features Of Opthalmoscope: 1. First Easy Entry Into Undilated Pupils 2. 5X Larger View Of The Fundus Vs. Standard Opthalmoscopes In An Undilated Eye 3. 25 Degree Field Of View Vs. Standard 5 Degree Field Of View 4. Greater Working Distance Improves Comfort For Both Practitioners And Patient 5. Patented Glare Extinguishment System Prevents Interference From Unwanted Glare And Reflections 6. Halogen Hpx Lamp Provides Bright 7. Compatible With All Existing Welch Allyn 3.5 V Power Sources 8. Digitally Capture, Store And Share Fundus Images By Combining With Eye Examiner For I Phone 4 / 4S, Eye Examiner For I Phone 6 / 6S And Eye Examiner For I Phone 6 Plus / 6S Plus Adapters 9. The Veterinary Pan Opthalmoscope Has A 3 Spot Sizes: Micro, Small And Large With Add On Magnifying Lens 10. One Year Warranty , Automatic Urine Analyzer , Veterinary Urine Analyzer For Veterinary Use Only And Not For Human For Species Canine, Feline And Equine, Based On Urine Strip Reflectance Technology To Measure All Parameters: Ph, Leu ( Leukocytes ) , Pro ( Protein ) , Glu ( Glucose ) , Ket ( Ketones ) , Ubg ( Urobilinogen ) , Bil ( Biliruben ) Single Test Urine Strip To Measure All Above Parameters, Very Light Weight And Not More Than 1 Kg With Calibration Strip For Calibration Of The Analyzer On Fix Frequency, Able To Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Maintenance Free And Ready To Use, Can Be Integrate With The Laboratory Information Management System ( Optional ) With In Built Thermal Printer To Printout All Parameters, Lcd Display For Operating The Analyzer Ce / Iso Approved , Automatic Blood Analyser, 5 Part Veterinary Hematology Analyzer For Veterinary Use Only And Not For Human, With Feature Of Direct Mode To Select The Canine, Feline, Equine, Bovine, Ferret, Gerbil, Rabbit, Pig, Mini Pig And Guinea Pig, Goat, Sheep, Llama, Alpaca, Camel, Dolphin, Based On Laser Flow Cytometry, Optical Fluorescence And Laminar Flow Impedance Technology To Measure All 26 Parameters: Red Blood Cell – Rbc, Hematocrit - Hct%, Hemoglobin - Hgb, Mean Corpuscular Hemoglobin Concentration - Mchc, Mean Corpuscular Volume – Mcv, Mean Corpuscular Hemoglobin – Mch, Red Cell Distribution Width – Rdw, Reticulocyte Count % , White Blood Cell – Wbc, Neutrophils - % And Neutrophils Absolute Numbers, Lymphocytes - % And Lymphocytes Absolute Numbers, Monocytes - % And Monocytes Absolute Numbers, Eosinophils - % And Eosinophils Absolute Numbers, Basophils - % And Basophils Absolute Numbers, Platelets – Plt, Mean Platelet Volume – Mpv, Platelet Distribution Width – Pdw, Plateletcrit Value – Pct, Requiring Less Than 30 ?L Of Anticoaguled Whole Blood, With Other Important Parameters Reticulocyte Hemoglobin, Band Neutrophil And Reticulocyte Count Also, Also To Report For Other Parameters Like Nucleated Rbc, Band Neutrophil Etc If Presence Suspected In Sample, Requiring Two Reagent Kits One External And One On Board, With Results In Two Minutes, Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Standby Mode, External Printer Interface Facility To Get The Printouts With All Parameters Including Dot Plot, Integrate With The Laboratory Information Management System For Analyzer Operation As Well As Patient Information With Patient Records, Us Fda / Ce / Iso Approved , Automatic Urine Analyzer , Veterinary Urine Analyzer For Veterinary Use Only And Not For Human For Species Canine, Feline And Equine, Based On Urine Strip Reflectance Technology To Measure All Parameters: Ph, Leu ( Leukocytes ) , Pro ( Protein ) , Glu ( Glucose ) , Ket ( Ketones ) , Ubg ( Urobilinogen ) , Bil ( Biliruben ) Single Test Urine Strip To Measure All Above Parameters, Very Light Weight And Not More Than 1 Kg With Calibration Strip For Calibration Of The Analyzer On Fix Frequency, Able To Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Maintenance Free And Ready To Use, Can Be Integrate With The Laboratory Information Management System ( Optional ) With In Built Thermal Printer To Printout All Parameters, Lcd Display For Operating The Analyzer Ce / Iso Approved , Otoscope / Auroscope, Otoscope Set , Inverter, Capacity: 900 Va / 12V; Maximum Bulb Load - 756 Watt, Protection: Mcb For Protection From Input Mains & Safety Alarm To Warn In Case Of Short Circuit, Display: Lcd Display For The Status Of Power Back-Up / Battery Charging Time In Hours And Minutes, Inverter Battery Capacity: 80 Ah - 150Ah, Battery Type: Tall Tubular Inverter Battery , Nominal Voltage: 12V; Rated Capacity At 27Oc: 200 Ah , Bench Platform Stainless Steel Weighing Balance ( Capacity 200Kg ) , Calibration- Internal, Weighing Capaciy Upto 200Kg, Material-Ms , Restraining Chain For Dog, Dog Restraint Heavy-Duty Tie-Out Chain Featuring Two ( 2 ) Snap Hooks, Lengths: 3 – 4 Meters, 3-5 Mm, Stainless Stell , Electric Water Heater, Capacity- 25-50 Litres, Max Rated Pressure- 5-10 Bar, Power ( Kw ) -2-4 , Stretcher Trolly For Small Animals, Stainless Steel Stretcher Trolley For Small Animal , Removable Stretcher, Attachment Hooks, Stainless Steel Tray, Possibility Of Integrating A Coloured Carpet With Frame, 4 Retractable Handles As Well As 4 Castors, 2 Of Which Have Brakes. , Muzzel For Dog Restrain, For Dog , Needle Destroyer, Input Electrical Supply- 1Ph, 230 Vac ( + / - 10% ) , 50 Hz ( + / -3% ) , Enclosure- Abs Plastic Injection Molded, Power Consumption- 100 Watts ( Minimum ) In Continuous Rating, Destruction Capacity- Needles Of Size Dia 0.4 Mm To 1.6 Mm, Syringe Cutter- Hardened Stainless Steel Cutter, Collection Tray Capacity- Maximum 200 Nos Of Cut Syringe Hubs & Swarf Of Destroyed Needles. Overall Dimensions- 230 ( L ) X 150 ( W ) X 95 ( H ) Mm. Weight In Kgs: 2.0 Approx. , Pet Hair Trimmer, Low Noise Cordless With 4 Comb Guides Scissors Pet Hair Trimmer , Pet Nail Cutter, Stainless Steel Sharpness Blades, Secure Grip Rubber Coated Non-Slip Handles, Safety Lock Mechanism, Safety Guard , Staining Rack, Designed For The Staining Of Upto 25 Microscope Slides , Travis For Pet ( Squeeze Cage ) , Heavy Duty Metal Cage To Restrain Pet Dog / Cat ( Length-30, Breadth-16, Height-20 ) , Ot Table, Side End Control Ot Table Is Mobile, Hydraulic Designed For Small Animal Surgery. Adjustable Height Functions. The Surface Of The Table-Top Should Beplain And Is Smooth And Easy To Clean And Disinfect. The Base And Column Of The Table Should Be Of High Quality Medical Stainless Steel. Non-Reflecting Surface, Antibacterial & Easy To Clean. Height Adjustment By Stepping Foot Pedal Downward. Lateral Tilts, Trendelenburg, And Are Realized By Handle Manually. Equipped With Drain System. , Ambu Bag, 265Mm With 85Mm Diameter. Volume: 1500Ml Weight: 190G Components: - Connector, Complete, Towards Patient Valve ( 24.3 ) . - Outer Cover ( 24.2 ) - Inner Bag ( 24.1 ) - Inlet Valve For Combined Air And Oxygen: Complete With Silicone Membrane And Tube Connector For The Oxygen Reservoir ( 24.7 To 24.10 ) , Infrared Lamp, Power- 300W-4000W, Voltage- 110V-440V , Instrument Cabinet, Material- Aluminium, Size / Dimension- ( H ) 1800 X ( W ) 900 X ( D ) 400 Mm, Finishing- Polished, Number Of Doors- 2 Doors, Lockable, Thickness- 1 Mm, Handle Material- Aluminium , Nebulizer, Usage / Application- Hospital, Operation Mode- Table Top, Type- Soft Mist Inhaler , Oxygen Cylinder, 10 Lt , Electric Orthopaedic Bone Drill Machine, One Handpiece, One Charger, Two Batteries, One Sterilizing Channel, One Drill Chuck , One Aluminium Alloy Box, Axial Run-Out Of Cincentricity Is Within 0.05Mm, Rotating Speed Of About 1100 Rpm, Rotated Torque 3.3N / M , Bone Cutter, Material- Stainless Steel, Length- 9 Inch, Steel Grade Ss410, Surface Finish- Dull, Working Type- Double Action , Bone Hammer, Bone Hammer- Nylon Faced, Material- Stainless Steel, Handle Material- Fiber Handle , Bone Holding Forceops, Type- Surgical Equipments, Material- Stainless Steel, Size- 150 - 280 Mm, , Cow Anti Kick Bar, Automation Grade- Manual, Weight-1.7 Kg , Electrical Dehorner, Material- Stainless Steel, -With 24 Volt Safety Transformer, -Including Dehorning Tip Ø 18 Mm, -Very High Heat Release , Electrical Plaster Cutter, Blade Size-42.5 Mm And 62.5 Mm, Includes- 1Spanner And 2 Blades , Digital X-Ray Machine , High Frequency X-Ray Machine Suitable For General Radiography. X-Ray Generator: - High Frequency X-Ray Generator Having Frequency Of 110Khz Or More Should Be Provided. - Power Output Of Generator Should Be 4.2Kw. - Radiographic Kv Range Should Be 40 To 120Kv. - Ma Range ( Rad. ) : 110Ma Or More. - Exposure Time ( Rad. ) : 9 Ms To 5Sec. - Mas Range ( Rad. ) : 1 To 200Mas. Control: Attractive And Ergonomically Designed Control Panel With Total Soft Touch Switches For Various Operations. Having Following Functions & Indications. • Machine On / Off Switch • Digital Display Of Kv And Mas. • Kv And Mas Increase And Decrease Switches. • Ready And X-Ray On Switch With Indicators • Bucky Selection Switch. • Stand By And Exposure Release Switch. • Self Diagnostic Program With Indicators For:- ? Earth Fault Error ? Kv Error ? Filament Error ? Tube Head Thermal Overload. • X-Ray On Indicator. • Incoming Voltage Indicator. • Anatomical Programming Up To 216 Pre-Programmed Functions In Which Automatic Selection Of Technical Factors Is Done According To The Body Part Selection. A 2-Step Hand Switch With Dual Action For Exposure Release With Retractable Cord Should Be Provided For Taking Images From A Safer Distance. X-Ray Tube: • Mono-Block Version X-Ray Tube Head Should Be Provided. The Mono-Block Consists Of Stationary Anode X-Ray Tube, H.V. Transformer, Filament Transformer, H.V. Rectifiers And Capacitors, All Immersed In High Grade Oil With High Dielectric Strength. Mono-Block Tube Head Should Be Protected For Thermal Overload. • Manual Lbd ( Light Beam Diaphragm ) With Should Be Provided With Provision Of Auto Shutoff. Stand: Mobile Stand With 4-Wheel Design, Which Ensures Easy Mobility And Steering. The Spring Balance Stand ( With Fixed Tube Head Column ) Should Be Very Light In Weight With Tube Arm, Which Is Very Easy To Maneuver And Allows Smooth Movements Of Tube Head In Vertical Plane. Lead Lined Cassette Storage Box. This Mobile Stand Is Made To Withstand All Jerks While In Use Offering Unparalleled Reliability. Sbm Stand Can Be Easily Moved On Floor And Lock Should Be Provided To Lock Its Movement On Floor. The Equipment Occupies Minimum Floor Area And Is Capable To Be Taken Through Elevators With Ease. Power Requirement: Single Phase 230V, Ac And 50 Hz., 15 Amps With Line Regulation Of ±10%. Other Requirements: • The Company Should Be Iso And Icmedcertified. • The Unit Should Be Approved By Aerb. • The Unit Should Beeuropean Ce Certified From Notified Body. • The Company Should Have A Local Service Center. • The Company Should Have Proven Track Record In Govt. Sector. , Dryview Laser Imaging Film • Blue 7-Mil Polyester Base • Daylight-Load Film Cartridges • 125 Sheets / Cartridge Choice Of Film Sizes • The Dryview 5700 Laser Imager Should Support The Following Film Sizes 14 X 17 Inch ( 35 X 43 Cm ) 11 X 14 Inch ( 28 X 35 Cm ) 10 X 12 Inch ( 25 X 30 Cm ) 08 X 10 Inch ( 20 X 25 Cm ) Automatic Image Quality Control ( Aiqc ) • Should Ensure Consistency From Film To Film • Automatic With No User Intervention Network Connectivity • Integrated Dicom Interface Should Support Printing From Dicom Print Modalitites Network Connection • 10 / 100 / 1000 Base-T Ethernet Connection To Mange ( Should Support Jumbo Frame ) Dicom Sop Classes Supported • Basic Grayscale Print Mangement Meta Sop Class • Basic Color Print Management Meta Sop Class • Presentation Lut Sop Class • Basic Automation Box Sop Class • Verification Sop Class Dimension / Weight • Height: 19 Inch ( 47 Cm ) • Width: 24 Inch ( 61 Cm ) • Depth: 26 Inch ( 66 Cm ) • Weight: 120 Lbs. ( 54 Kg ) Power • 100-120 Vac; 50 / 60 Hz • 200-240 Vac; 50 / 60 Hz Operating Environment • Temperature: 59 To 91° F ( 15 To 33° C ) • Humidity 20 To 80% Rh, Non-Condensing • Magnetic Field < 50 Gauss • Altitude:-100 To 10000 Ft ( -30.5 To 3048 Mts ) User Interface • Simplified User Panel • User Documentation And Languages Supported: - English ( Uk ) - English ( Usa ) , X Ray Flim Viewer, Specification • Luminance: Max 100000 Cd / M² • Film Density: Max 4.0 D According To En 25580 / Astm E 1390 • Control Range: 1 – 100% • Viewing Screen: 225 X 80 Mm ( 10 X 24 Cm ) • Rated Power: 70 W • Power Supply: 90 – 264 V Ac / 24 V • Dimensions: 315 X 62 X 150 Mm • Lifetime Of Leds: 40000 H • Colour Temperature Of Leds: 5000 K • Housing: Anodized Aluminium Profile With Cooling Fins – Completely Closed To The Environment • Viewing Screen: Crystal Glass With 95% Translucency, Thermally Cured, Anti-Reflective Coating
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 10
Contract Date: Ref. Documents Contract Value : 33.63 Lakh
Government Departments No of Bidders 1
Contract Date: Ref. Documents Contract Value : 47.20 Lakh
Boards / Undertakings / PSU No of Bidders 3
13.
Educational and Research Institute #9832816 AOC
PROCUREMENT OF MACHINERIES, INSTRUMENTS, TOOLS AND EQUIPMENTS ETC. RELATED TO ELECTRICAL ENGINEERING AND ELECTRONICS AND TELECOMMUNICTION ENGINEERING LABORATORIES AND WORKSHOPS OF MATHABHANGA GOVERNMENT POLYTECHNIC, MATHABHANGA, COOCH BEHAR, WEST BENGAL- 1 ANALOG ELECTRONICS LAB-I (3RD SEM) 2 50 MHz Dual Channel CRO• Automatic Measurements of Signal Parameters like .Pk-Pk, Average, Max. , Min., rms, top etc. Voltages and Frequency, Period,Width,Duty Cycle, Rise Time, Fall Rime • Waveform and Set up storage facility.• Colour Display. • Advanced features like sequential acquisition of up to 1000 trigger events should be possible.• Standard USB Host & Device Connectivity. • Standard 23 Automatic Measurement andMath Function Including FFT.• Education student Lab guide and professor slide set.DETAILED TECHNICAL SPECIFICATIONS:-a)No. Of Channels:2b)Bandwidth :50 MHzc)Maximum Input:400 V (peak ac + dc) d) Sample Rate :1 GSa/sece)Waveform Update Rate : 400 Waveforms/secf)Memory : 16 Kpts/Ch.g)Time Base : 5nsec / div. To 50 sec./div.h) Resolution : 8 bitsi) Display: 5.7 inch Colour QVGA TFT LCD Display.j)Trigger Modes: Force, Edge, and Video, Pulse width.k) Built In Interface : Standard USB 2.0 (Host and Device)l)Power Supply: 230 V AC Supply, 50 Hz. 3 Function Generatori)Itshould be a waveform / function generator which can be upgraded to an arbitrary waveform generator . It may also have the feature upgrade the frequency of operationii) Should have low harmonic distortion and jitter.DETAILED TECHNICAL SPECIFICATION:--• Frequenc : 1Hz. to 20 MHz for Sine , Square and PulseWaveforms and 1 Hz. to 20 MHz. for Noise• No. of Channels: 1• Frequency Resolution : 1Hz.• Amplitude : 1 mVpk-pk to 10 v (pk - pk) in 50 ohms. • Duty Cycle for Pulse : 0.01 % to 99.99 %• Standard Waveforms: Sine,Square,Ramp,Pulse,Triangle,•Operating Modes: Continuous,Modulate,. .• Modulation Types: AM,FM,PM,FSK,BPSK,PWM• AM : Source both Internal & External, Depth 0 to 120 %With 0.01 % resolution.• FM : Source both Internal & External, Deviation 1Hz to 15 MHz• PM: Source both Internal & External, Deviation 0 to 360 deg C.• PWM : Source both Internal & External. Deviation 0 % to 100 %.• Power Supply : 230 v,50 Hz. ac. 4 Digital MultimeterDC Voltage:400mV to 1000V , AC Voltage: 400mV to 1000V,DC Current: 4mA to 10A, AC Current: 4mA to 10A, Resistance: 100 ohm to 40Mohm, Resistance: 100 ohm to 40Mohm,Capacitance: 4nF to 200µF, Duty Cycle: 0.1% to 99.9%, Frequency: 10Hz to 10MHz, Temperature: 20oC to 750oC,Transistor Test: Yes (for NPN & PNP), Diode Test: Yes, Continuing Buzzer: Yes, Power Supply: 9V, Manual and Auto ranging,Display: 4½ Digit 5 To study the V-I characteristics of UJT Trainer kitVariable DC Power Supply 1.2V to 12V/500m,A DC Power Supply for DPM 5V/500m,A UJT (2N2646) UJT Characteristics UJT Relaxation Oscillator with two different Timing Capacitors ,DigitalMeters for Measuring Voltage and Current ,Set of Patch Chords & User Manual 6 To study the input and output characteristics and to find the h-parameters of a BJT for : —(a) C-E configuration,(b) C-C configuration,(c) C-B configurationHARDWARE SPECIFICATIONS :Dual Variable DC Power Supplies 0V to 12V/500mA and0V to 15V/500mA DC Power Supply for DPM 5V/500mAIndependent Base Limiting Resistors - 2 Nos.(low value) Independent Collector Resistor - 1 No. Transistor( NPN Type SL100) .All Inputs/Outputs through 2mm Sockets set with provision of Digital Multimeter for measuring input and output. 7 ANALOG ELECTRONICS LAB-II (4TH SEM) 8 Feedback Amplifier Trainer12 V DC supply with +/- 10%accuracy,configurable circuit,Inbuilt sine wave generator with frequency range 10 Hz to 10 KHz rangeand Amplitude variation 10mV to 4V, NPN transistor. Voltage Series & Shunt and Current Series & Shunt configurable operation. 9 Oscillator Trainer KITi) Hartley, Colpitt ,Wien Bridge Oscillator Trainer kit : i) NPN Transistor ii)On boardoscillator section,separate tank circuit (iii)Biasing Voltage :+12 V , -12 V ,+12V SMPS Adaptor provided with the trainer for power supply.Designed by considering all the safety standards. Provided with an extensive manual.Power Supply to Kit: 230VAC,50Hz, All interconnections are made using 2mm banana Patch cords 10 To determine the following characteristics of op-amp: —a) input offset voltage, b) slew rate, c) non-inverting gain, d) inverting gain e) adder, f) subtractor, g) differentiator, h) integratorandi) voltage followerTo adjust offset null, setup the closed loop amplifier using IC741 op-amp also to (a) dc gain (b) ac gain. The set complete with +/-12V DC regulated power supply with milli voltage source, Null arrangement and 2V/20V dual range digital voltmeter , In built sine wave,triangular wave & square wave Generator of1 KHz, 15V Vpp (approx.), DC Power Supply : 0 - 5 V (vary through (2No.) rotary switch for specific voltage level 11 DIGITAL ELECTRONICS LAB (3RD SEM) 12 Complete setup to implement encoder, decoder ,multiplexer andde-multiplexer5V D.C. at 100mA, IC regulated power supply,21 Input Switches for data input,IC For Multiplexing 74150 is provided on board with Combinational Circuit, IC For Demultiplexing 74154 is provided on board with Combinational Circuit, One Not Gate is provided on board using 7404 ,16 Output LEDs with driver circuit to observe the output of Multiplexer Demultiplexer, A Pulser to provide the pulses manually for triggering,230 V ±10% at 50 Hz A.C. Mains,necessary patch cords and user mannuals. 13 Complete setup to design / construct parity generator, checker andcomparatorDC Regulated Power Supply 5 VDC/150 ma,5 SPDT switches provided for selecting logic ‘1’ & logic ‘0’,2 output indicators,Sufficient no of 4mm Patch Cords for Interconnection,Power Cords 230v, 50Hz,necessary patch cords and user mannuals. 14 Complete setup to design / construct binary synchronous and asynchronous counterTrainer kit for binary Synchronous and Asynchronous counter. with power supply, display unit, patch cords, manuals and necessary IC. 15 Digital I.C TesterUniversal IC tester: 40 pin DIP ZIF socket, 50 cherry keys Key pad and 16 X 2 LCD Display, suitable for testing of Analog IC, Digital IC and 7-segment display. 16 A/D & D/A Converter TrainerFEATURESAnalog To Digital Converter• 8-bit descrete ADC•12-bit monolithic ADC IC•On-board signal generator with adjustable amplitude levels•On-board LED bank to observe digital outputs•Power supply : +5V, ±12V GND•Interconnection is provided by 2mm connectors•Experimental manualDigital To Analog Converter•8-bit binary weighted resistors DAC•8-bit ladder type D to A converter•8-bit D to A converter using monolithic IC•Simple construction using Op-Amp and resistors•Onboard switches are provided for digital pattern generation•8-bit digital inputs ranges from 00 to FF•Variable frequency counter to study the settling timeSPECIFICATIONS•8-bit binary weighted and 4-bit ladder type DAC are constructed using discrete components•8-bit monolithic DAC having settling time in the range of ns, wide power supply range, low power consumption, full scale error ± 1LSB•8-bit digital ramp ADC constructed using discrete components•12-bit monolithic ADC having conversion time in the range of μs, industry standard pin out, wide input range•8 onboard switches to provide digital inputs to DAC•8-bit counter running on external clock frequency to study settling time of DAC• Built inlow frequency clock generator•1 KHz sine wave with adjustable amplitude level•Onboard variable DC voltage source for studying unipolar and bipolar modes of ADC •12 output LEDs to observe ADC outputs•ADA operates on DC power supply (+12V,-12V,+5V and GND)•Interconnection is provided by standard 2mm connector•Extensive experimental manual is provided with the kit EXPERIMENTSAnalog To Digital Converter• To study and measure resolution of ADC•To measure the conversion time of the ADC•To study full scale adjustment for unipolar and bipolar signals•To study the working of ADC 17 NETWORK ANALYSIS LAB ( 3RD SEM) 18 To study the series and parallelresonant circuitIndependent Resistors - 3 Nos. ,Independent Capacitors - 3 Nos.,Tapped Inductance. All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User ManualWITH SIGNAL GENERATOR, COUNTER, DIGITAL METERS FOR INPUT & OUTPUT and user manual 19 To test and to measure the cut –off frequencies of the following: —(a) constant k-type low pass filter;(b) constant k-type high pass filterTwo Independent Passive LC Filter Networks (LPF & HPF) All Inputs/Outputs through 2mm SocketsSet of Patch Chords & User Manual 20 To study standing wave pattern for a transmission line of finite length with:(a) open termination,(b) shorted termination andmatched termination. 2.To measure the attenuation constant and phase shift constant for matched terminationTransmission Line Trainer Features:* 30-300 Mhz sweep source with detector* Calibrated attenuator* Displays standing waves/maxima-minima on CRO* Uses actual coaxial lines rather than simulated ones.* Impedance matching.* Measures VSWR, reflection coefficient, characteristic impedance, velocity of propagation, dielectric constant and signal attenuation in TDR.* Measure parameters of 50, 75 and 300 Ohms cables* Study Time Domain Reflectometry.* Study location and nature of discontinuities,Open/short, mismatched terminations, etc.* Offers a complete view of the transmission line in analog and digital domains, which is essential for complete understanding of transmission line behavior.Technical Specifications:A. Frequency Domain AnalyzerFrequency range : 30-300 MHz typical LCD Display. Level : 100mV p-p Attenuator 50 Ohms : 0.5, 1, 2,4, 8,15 dB,Output Impedance : 50 Ohms Scope out : X-Y output to scopeB. Resistive Impedance Analyzer ,Characteristic Imp. : upto 800 ohms ,Display : LCD C. Time Domain ReflectometerPRR Short range : 10MHz typical,Pulse width : <10ns typical, PRR Long range : 100KHz typicalAmplitude : 1V nominal, Output Impedance : 50 OhmsAccessories:Lengths of 50 ohms and 75 ohms coaxial cable, 300ohms, parallel line, lossy line, Tee connectors, ,Standard load of 50and 75 ohms, Various capacitive and inductive loads, shorts, Balun 1:1 & 1:4, Operating manual, Mains cord 21 COMPUTER PROGRAMMING LANGUAGE LABORATORY (3RD SEM) 22 Computer Programming Language LaboratoryTURBO C++ Software 23 MICROPROCESSOR LAB (4TH SEM) 24 8085Microprocessor Trainer KitHigh performance 8085A CPU operating at 3 MHz.16 K powerful monitor FIRMWARE expandable to 32 K. 64 K user RAM. Expanded RAM accessible using bankWrite protect facility for RAM. 3.6 V Ni-Cad battery back up. Versatile Keyboard/Display controller using 8279. 24 highly reliable dual function keys. 6 digit seven segment LED display.Parallel I/O lines available through two 8255 chips. Serial I/O through 8251 USART, with on-board level shifters 1488,1489.Programmable communication parameters. Built-in audio cassette interface.3 channels of 16 bit timer/counters from 8253.Powerful 8085 interrupt capabilities. On-board EPROM programmer with ZIF socket for programming 2716 to7512 EPROMs and various EEPROMs. Normal and intelligent programming modes.On-board ADC,DAC, opto-isolator, reed relay and miniature speaker. On-board logic probe.Single stepping, break pointing and machine cycle single stepping facility. Monitor functions can be called through software interrupts. Large collection of application software provided. All address, data and control lines from the CPU, buffered and brought out on 50 pin connector. Additional Stepper motor of specification:Shaft type: 5 mm DCurrent rating: 1200 mA2Voltage rating: 4 VHolding torque: 44 oz·inSteps per revolution: 200Resistance: 3.3 Ohm2Inductance per phase: 2.8 mHNumber of leads: 6Lead length: 30 cm 25 Microprocessor 8086 Trainer KitINTEL 8086CPU AT 4.77 MHZ CLOCK SPEED,16KB for monitor EPROM upgradable to 64kb16KB RAM expandable to 64KBBattery backup provision for RAM upto 64KB16 x 2 (or) 20 x 4 Alphanumeric LCD display101 keys IBM compatible keyboard24 TTL I/O lines brought out to two nos., of 26 pin FRC connector1 number of standard RS232C compatible serial port brought out to a pin D type male connector.3 channel 16 bit counter/timer using 8253.Fully buffered address data and control signals terminated at a 50 pin header(VXT BUS) for interfacing VBMB seriesof experiment boards and bus expansion.8 no’s of interrupt lines are terminated at a 10 pin connector.Kit operates with a single +5V/DC supplyThe kit and the power supply are mounted on a attractive light gray color fiber glass cabinet with fiber glass top cover.Built-in line assembler & DisassemblerPowerful debugging monitor to develop user program. 26 ELEMENTARY COMMUNICATION ENGG. LAB 27 To study the amplitude modulation and demodulation Ttrainer kit Features of Amplitude Modulation and Demodulation Trainer:On-board message signal with variable Amp/Freq On Board carrier signal with variable Amp/Freq AM Modulation using MC 1496 IC Demodulation using Diode Detector and LPF,6th Order LPF,Op Amp Based Variable AmplifierInternal Power Supply +5V , +12V/ 500 mATechnical Specification :Message Signal:Sine wave Frequency 100 Hz to 2.8 KHz, Amplitude 0 to 3VCarrier Signal: Sine wave Frequency-28 KHz to 108 KHzAmplitude 2V,Modulation : Balanced ModulatorAmplifier : Op Amp BasedDemodulation : Diode Detector & LPFLow Pass Filter : 6th Order LPFSupply Voltage (Board) : +12V, +5V / DCSupply current : 100 mA (Minimum)Input Voltage : 230 V/ 50 Hz ACInterface connectors : 2mm socket 28 AM/FM Radio Receiver kitFrequency range: 400KHz ~ 1.5MHzIntermediate frequency: 455KHzInputs: RF signalOutput IF frequency: 455KHz adjustableIF filter: Dual tune LC, RF amplifier with variable gain ,Mixer (frequency converter),Local oscillator:Output Signal: Sine waveFrequency range: 400KHz ~ 1.5MHz ,Amplitude: Adjustable from 0Vpp ~ 2VppOutput impedance: 50 Ohm ,1st and 2nd IF amplifierCentral frequency: 455KHz, Load impedance: Variable R-L-CGain: 40db with automatic gain control, Diode envelope detectorDetection of the envelop with variable RC filter. Audio output:Amplifier with audio jack, Audio amplifier gain: 26Db, Receiving media :MW coil antennaFM radio receiver, Reception range: 88MHz ~ 108MHz with continuous tuningTuning circuit: Using GANG capacitorIntermediate frequency: 10.7 MHz with ceramic filterEXPERIMENTS:Study of double sideband AM reception using envelope diode detector,Study of single sideband AM reception using product detector,Study of image frequencies,Study of adjustment of receiver tuned circuits,Voice reception using DSB/ SSB AM receiver (super heterodyne receiver)Effects of switch faults FM detection output level: 77.5Vrms (typical)FM detection output distortion factor: 0.3% (typical)Audio amplifier: Gain up to 46DbReceiving media: Adjustable telescopic antennaPower supply: -12V,+12V,+5V,GNDOutput volume regulation, output load impedance of 8 OhmEXPERIMENTS AM radio receiverTo study AM radio receiverTo study of image frequencies for AMFM radio receiverTo study FM radio receiverTo measure the frequency response of Audio amplifier 29 Pulse code Modulation and Demodulation system trainerInbuilt variable DC and 1 kHz AC Modulating Signals, Facility for applying external AC or DC Modulating Signal, Modulating circuit consists of a Positive Clamper, Sample and Hold (S and H), Analog to Digital Converter (ADC), Parallel to Serial Converter and Control Signal Generator, Observation of binary coded analog information by the LED status for both Modulation and Demodulation, PCM Modulation technique using IC, Built-in Pulse Code Demodulation circuit using a Serial to Parallel Converter and Parallel Shift Register DAC, Low Pass Filter for both AC & DC, Observation of Modulated & Demodulated waveform, Provision to monitor output on CRO, Clock to be provided from the Pulse Code Modulator to Demodulator circuit, Built-in IC based DC Regulated Power Supply with indication for power ON & fuse, 4 mm Patch Cords – 4 nos, Supply required 230V, 50 Hz and 1 phase AC, Comprehensive instruction manual complete with theory and operating details. 30 Frequency Modulation andDemodulation kitFM Modulators :Audio Oscillator : Sine wave (10Vpp adjustable) Frequency (300 Hz - 3.4 KHz) FM Modulators : 3 nos. • Reactance Modulator : Carrier Frequency - 455 KHz (± 3KHz) Varactor Modulator : Carrier Frequency - 455 KHz (± 2KHz) VCO Based Modulator : Carrier Frequency - 10 KHz - 200KHz (adjustable) ,Mixer / Amplifier adjustment FM Demodulator:Detuned Resonant DetectorQuadrature DetectorFoster-Seeley DetectorRatio DetectorPhase-Locked Loop Detector (IC HEF4046 based)Phase-Locked Loop Detector (IC LM565 based), Low Pass Filter : 3.4 KHz Cut off Frequency Amplifier (with adjustable gain) 31 DPCM & ADPCM MODULATION / DEMODULATION KITDPCM & ADPCM MODULATION / DEMODULATION KITOn Board Signals:. Frequency: 500KHz, Amplitude: 0 to 4 v pp 32 CONSUMER ELECTRONICS LAB (4TH SEM) 33 Black & White TV Trainer kit with provision of fault findingSystem: CCIR-B, 625 lines, Power supply :230V Ac, 50 Hz, Regulation range170v Ac to 270v Ac.,Power consumption :70 watts,Gain Limited sensitivity:55 dB for Video & 25 dB for AudioSound output :2.0 watts maximum. Screen size :20 Diagonal. Channel :VHF 2 to 12, UHF 21 to 68,S-band and Hyper-band. Isolated shockproof chassis. Sections:Electronic tuner, VideoI.F Section, Sound I.F, Video amplifier, Horizontal oscillator, Horizontal driver and EHT, Verticaloscillator, and output, S.M.P.S power ,Controls: Volume, tone, Brightness, contrast. Distortion :10 to 15% in Live program due to expanded P.C.B. All parts are soldered on Tags on SINGLE PCB of size 19x15” with complete circuit diagramSCREEN PRINTED in different colors with FAULT CREATING FACILITIES to create more than 25 faults. Standard Accessories : 1. Frame with PCB mounting.2. Picture tube fitted in wooden cabinet 3. A Manual having 20 practical. 34 DTH TV and SET TOP BOX TRAINER KITPower supply 230 V ,50 Hz, Input frequency: KU Band, Output frequency: 950-1450 Mhz.Noise temp: 35 degree,DISH ANTENA ,LNBIF FREQUENCY: 70 MHz 35 Colour TV Trainer with provision of fault findingStandard : CCIR-B-PAL-G, 625 Lines Channels : 230, 2 - 4 VHP I (VL), 5 - 12 VHP III (VH), 12 - 100 : BAND IV & V, else : S BAND & HYPER BAND Picture Tube Size : 36 cms. Diagonal RF Input Impedance : 75 W (Ohm) 36 DIGITAL & MICROWAVE COMMUNICATION ENGG. LAB 37 Spectrum AnalyzerFrequency range:9 KHz to 26.5 GHz,Phase noise :-102dBc/Hz, Max third order dynamic range, 1 GHz: 111dB, Displayed average niose level,1GHz:-163dBm,Standard attenuator range/step:50dB/10dB,70dB/10 squaredb,Overall amplitude accuracy:+/- 0.50dB 38 Antenna Trainer 86 - 860 MHZSPECIFICATIONS:Radiation pattern plotting software• Stepper motor controlled receiver stand.Antenna Measurement System:RF Source•Source types :PLL Synthesized with integrated VCO• Frequency range :100MHz to 3GHz• Dynamic range :85dBm• Transmitted power min:-50dBm• Transmitted power max:+5dBm • Impedance :50W / SMA RF Detector• Detector type: logarithmicdetector• Frequency range : 1MHz to 8GHz• Resolution: 0.1dB• Dynamic range : 85dB (±3dB)• Noise level : -90dbm• Impedance: 50W /SMA• Representation of RF level : dBmDisplay•128x64 Graphic LCD Display with backlit. Keypad•15 Key Membrane Keypad for user entry.Stepper motor controller•1.80 Resolutions.List of Standard 22 Antenna Suppliedwith the setupWire Antenna1.Monopole Plane base ground2.Dipole (2nos.) 3.Yagi4.Folded Dipole 5.Vee Dipole6.Rectangular Loop 7.HelicalMicrostrip Antenna 1.Planar Dipole 2.Planar Monopole3.CMSA 4.TMSA5.2X1 ARRAY 6.Annular ring7.Chip Antenna8.RMSA9.RMSA- Circular PolarizedAperture Antenna 1.E- Horn2.Open ended Waveguide Rectangular Array Antenna 1.Broadside Array2.Collinear ArrayReflector Antenna 1. Corner reflectorSOFTWARE• Radiation pattern plotting and analysis software suitable for windows environment Antenna PositionerThe Transmitter and Receiver Antenna stand is made of special material which is inhert to EM frequency and it has engraved height and angle scale on It. It has facility to adjust the height and level. Universal plug and fix Antenna mounts are provided to hold the antenna assembly in vertical and horizontalorientation for co and cross polarization.ACCESSORIES • SMA (M) to SMA (M) 50W flexible cable : 02nos• USB cable ( Male A to Male B): 01no• 3 Pin 6 Amp Power chord: 01no • Manual : 01no • Software on CD: 01no EXPERIMENTS• Measure the variation of field strength /inverse square law• Prove the reciprocity theorem of antenna• Plot Radiation pattern of WIRED Antenna Omni directional antenna• Plot Radiation pattern of all Aperture Antenna• Plot Radiation pattern of all Reflector Antenna• Plot Radiation pattern of all Array Antenna• Measure co-polarization, cross polarization 39 Microwave Test Bench (KLYSTRONBased)Klystron Power Supply: Specifications:Input Voltage -230V+/- 10%, 50Hz AC, Beam supply- Voltage:200-450V continuously variable; Current:Regulation: better than 0.5% for +/-10% variation in mains supply voltage; Ripple: less than 5mV rms ,Repeller Supply -Voltage:-10V to -270V continuously variable with respect to klystron cathodeRegulation: better than 0.25% for +/-10% variation in mains supply volt , Heater Supply - 6.3V DC (regulated)Modulation- Square Wave : Frequency 500Hz to 2000Hz; Max. Amplitude- +110V peak to peak, Amplitude and frequency continuously variable; Sawtooth- Frequency 50Hz to 150Hz; Max. Amplitude- 60V peak to peak, Amplitude and frequency continuously variable.VSWR Meter: (Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Power : 230 Volts AC, 50Hz, mains supply) 40 ASK / PSK / FSK Modulation And Demodulation KitFEATURES•VLSI based design •Separate component and operational area •Acrylic cover for component safety •Modular organization of circuit functions •Test points to access signals at every stage of circuit operation •Multimedia based interactive e-manual Data Simulator: Onboard 8-bit variable NRZ-L pattern,Crystal Oscillator: 32.768 MHz,Data Clock: 256 KHz,Data Format: NRZ (L),Onboard Carrier Sine Waves : 1MHz (0°), 1MHz (180°), 500 KHz (0°),Power Supply: +12V, -12V, +5V, GND. 41 Microwave Test Bench (GUNN Based)Gunn microwave test bench:Gunn Power Supply (0 - 12 Volts variable,1 Amp. Max,Modulation Frequency: 1KHz +/- 10% (900-1100 Hz),Output Connector: BNC(F) for Gunn Oscillator & TNC(F) for Pin Modulator,Modulation: Square Wave, Frequency : 500Hz to 2000Hz)• Gunn Oscillator • Isolator• PIN modulator• Variable attenuator • Detector Mount• SWR meter(Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Powe : 230 Volts AC, 50Hz, mains supply) 42 1 GHz spectrum Analyser1 GHz spectrum Analyser with tracking generatorFrequency range: 150 KHz to 1000 MHzFreqency Resolution: 1 KHz CF entry 40 Hz sweep resolution at 2 KHz per Division,Frequency Display: 61/2 digitFrqency Control: Digital Phase LockResolution Bandwidth: 3 KHz, 30 KHz, 220 KHz, 4 MHz. 43 INDUSTRIAL ELECTRONICS LAB -I (5TH SEM) 44 Trainer Kit to study Reverse Recovery Characteristics of Power DiodesThe single Board trainer Kit should contain IC Regulated Power Supply, Different types power diodes, Digital Ammeter and Voltmeter and other necessary passive components 45 To study drive circuit of SCRIsolated 230 V/40 W AC Power Supply1.2 V to + 15 V/500 mA DC Power Supply* 0-18 V/500 mA,50 Hz, AC Power Supply* Variable frequency triggering pulses* DC Gate signal control, Pulse gate signal * Synchronous AC gate control signal through DIAC* UJT Triggering* 10:1 On- board resistive attenuator * Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 46 To study a single phase rectifier—output waveform with phase control circuitTrainer Kit to study Single Phase Full wave Bridge Rectifier for fixedDC output, Half Controlled and fully controlled rectification facilities with R and RL, loads 1000 Ohms 10 Watts, 14 ma @ 0.05 A inductive loads.The Single Board Trainer Kit contains :(i) Source for rectification of 4 to 24 V DC fixed and variable output @ a max of 500 ma helps to construct and study Series and Parallel resonance Circuit.(ii) Four Diodes and 4 SCRs in bridge configuration with gradual firing controls and necessary capacitive, inductive and Pie filter components.(iii) Digital Ammeter and Voltmeter. 47 To study a polyphase rectifierIsolated 230 V/40 W AC Power Supply Isolated stepped down 3 PH supply. * 3 Phase diode rectifier in open condition*Provision for Load& CRO output.* Electronic phase sequence finder.*Set of Patch Chords & user Manual 48 INDUSTRIAL ELECTRONICS LAB-II (6TH SEM) 49 Servo Regulator Stabilizer Study Kit500VA Servo stabilizer , 2 Amp Variac, Digital input & output meters, Lamp load, Set of Patch Chords & userManual. 50 To study a Jones chopperIsolated 230 V/40 W DC Power Supply, + 5 V/500 mA DC Power Supply* SCR Jones chopper* Gate firing pulses for Jones Chopper* 10:1 On-board Resistive Attenuator* Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 51 To study speed control of induction motor by voltage and frequency variationV/F CONTROLLER 1 HP, AC SQ. CAGE IND. MOTOR 1 HP,DIGITAL VOLT & AMMETER. 1 PHASE I/P & 3 PHASE O/P,3 PH & 1PH MCB PROTECTION 52 To study the speed control of DC motor by:(a) varying field current keeping armature voltage constant; and,(b) varying armature voltage keeping field current constant DC SHUNT MOTOR (FULL COPPER WINDING) .5 HP WITH BASE MOUNT FRAME 1 No VARIAC CONTROLLED 2 DC POWER SUPPLY ( 1 FOR FIELD & 1 FOR ARMATURE)DC VOLT & AMMETER DIGITAL………4 NosPANEL MOUNTED RPM METER………1 No.WHITE BAKELITE FRONT WITH CONN. DIAGRAM & WOODEN SAFETY BOX.METAL FRAME TABLE (Ply board with sun mica) CUM STAND FOR PANEL 53 Power Electronics Devices Trainer KitShould have Built in power supplyDC supply : +/- 12V, 500mA,Power supply 17V / 750mA,Regulated 13.5V/3A O/P mustbe provided as 12V Battery charging supply. Isolated DC supply +12V/ 300mA with isolated common.On board Inverter transformer of Primary : 230V & Secondaries 12-11-0-11-12/3AOn board Lamp load of 15W (100W) should be provided.AC supply : 230V AC line voltage must be made available on two banana 4mm socketsMust have Two pulse transformers of 1:1:1 are provided for isolation & supplying firing pulsesalong with required DC Power supply to experiment panel under test through 15 pin female ‘D’connector.R-L-C Load PanelMust have Load resistor of 10W / 40W --- 1no.Must have Centre tapped 3A choke 4mH/ 16mH each ----2nos.Must have Commutation capacitors of 10mF/100V -------4nos.Must have AC Paper capacitor of 4mF/440V ---1no. 54 PLC Trainer (EXPERIMENT 1-Use of simulation package for different function of PLC. EXPERIMENT 2- Verify function of logic gates by using PLC. EXPERIMENT 3- Write and verify ladder program for motor ON-OFF Control with two push button)HARDWARE SPECIFICATION:TTL Input Switches : 8 Nos,TTL Momentary Switches : 8 Nos., Proximity Switch : 1 No.,Optical Transducer (two state) : 1 No., Programmable LEDs : 8 Nos., Analog input 0 to 5V DC : 8 channels, Analog output 0 to 5V DC : 1 No., 4 to 20mA Transmitter : 1No., 4 to 20mA Receiver : 1No., Current Meter : 25mA FSD 1No.,Voltmeter : 10V FSD 1 No., Piezo Electric Alarm : 1 bit.Built-in power supply.Dedicated I/O interface card suitable for IBM computer suitable for ISA slot. SOFTWARE SPECIFICATION:This is a GUI based LADDER LOGIC SOFTWAREDRAG AND DROP (D&D) an instruction instead of typing an instruction. This eliminates errors in typing. All the instructions are displayed ON-SCREEN during Design time. Each and every element is directly addressed with their NAMES not by numbers or codes, which are very difficult to remember. Ex: At design time, you call a SWITCH#0 in your Ladder program by D&D the component called SWITCH#0, and that’s it, not by typing a few digits numbers or codes.Appropriate LIST boxes (input, output) open as you D&D an instruction in LADDER WORKSPACE.Ladder workspace is 24X100 instruction CELLs are available for your use.TOOL TIP features are available at the end of each instruction prompting you “what to do next”Very user friendly.Extensive ON-LINE HELP menu available.GUI based STATUS of the entire PLC is displayed during RUN TIME.Programs are saved, retrieved, edited by simply clicking on Menu list box.Extensive EDIT features are available. 55 Power Electronics Development TrainerSize of Breadboard : 172.5 mm × 128.5mmDC Power Supply :+5 V, -5 V 500 mA,+12V, -12 V 500 mA+15 V, 250 mA+35V, -35V, 250 mAAC Power Supply :18V-0V-18V ,0V-15VOn board Firing CircuitsFrequency range : 30Hz to 900Hz variableAmplitude : 12VPWM control of G1, G2, G3 and G4Duty cycle control of “Gate”Signal is 0 to 100%SCR Assembly : 4 SCRs 2P4M, 400V/2APower Devices : IGBT-G4BC20S, MOSFETIRFZ44N,UJT-2N2646, DIACDB3,TRIAC-BT136, PUT-2N6027Circuit Components on board : Electrolytic Capacitor 10µF, 63V,Electrolytic Capacitor 1µF, 63V ,Met. Capacitor 0.33µF, 63V ,Diode 1N4007, Inductor 220uH, 4.7µH, 10mH.Pulse transformer on board :2 nos. PT4502 1:1 and one is PT4503 1:1:1Load selector : 6 load resistances- 47E/7W,1K/1W, 1K/10W, 10K/10W,120E/5W, 2K2/2W.Test points : 10 nos (Gold plated)Power Supply (Mains) : 220V/110V, 50Hz/60HzIncluded Accessories :Bread boards : 2 nos.Connecting wires : 20 nos.2mm to 1mm Patch cords : 15 nos.2mm Patch cords (Red) 16” : 4 nos.2mm Patch cords (Black)16’’ : 4 nos.2mm Patch cords (Blue) 16’’ : 12 nos.Mains cord : 1 no.with i) Power Semiconductor Application Experiment Panel ii)CON / INV Panel iii)Triggering circuit / dv/dt Protection panel 56 ELECTRICAL & ELECTRONICS MEASUREMENT LAB (6TH SEM) 57 Digital LCR meterVariable measured- L,C,R and loss angle (D factor ) Measured frequencies: 1 KHz, 100KHzDisplay: 3⅟₂ digit , Resistance: 0 to 20 MΩ, 0.1 Ω , Capacitance: 0 to 20000μF, 0.1 pF Inductance: 0 to 20000 H, 0.1μH ,D factor: 0.01 to 8.0 with 1% error 58 Distortion Factor MeterFrequency : 20 Hz to 200KHz Distortion:0.1% to 100% f.s.d. in steps ,Input sensitivity: 100mV (r.m.s.), Input impedance: 1MΩ/160pF, Voltmeter range: 300μv to 300v f.s.d. in 13 range 59 To measure L & Q by Maxwell methodFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 60 To measure the unknown capacitance by Schering bridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 61 To measure the unknown frequency by Wein BridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER WITH FREQ. COUNTER & CRO SIG. O/P INBUILT& CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., BACKLIGHT LED & WOODEN HARD BOX 62 MICROCONTROLLER AND EMBEDDED LAB (5TH SEM) 63 Microcontroller Trainer Kit 1.Write a Simple Assembly Programs fora. Addition b. Subtraction b. Multiplication d. Division2. Write a Programs for (any two of the following)i. 4 x 4 Matrix Keypad Interfaceii. character based LCD Interfaceiii. Analog to Digital Conversion (On chip ADC)iv. Serial EEPROMv. Seven Segment LED Display Interfacevi. Interfacing With Temperature Sensorvii. Stepper Motor Interface8 BIT EMBEDDED MICROCONTROLLER TRAINERFEATURES•Single board design with various resources•Excellent training platform for embedded applications•Software development tools include assembler and ‘C’ compiler•Easy adaptability to different versions of microcontroller in the same family SPECIFICATIONS•Experimental board for 40 pin MCS51 and AVR family of microcontrollers•In-system programming (ISP) facility for many microcontrollers•Double RESET signal with manual key•Crystal frequency: 11.0592MHz•On-board RS232 compatible serial interface terminated in a 9 Pin D female connector•4×4 matrix keyboard•16×2 alphanumeric LCD connector (4-bit interface) and trimmer for contrast adjustment•Four 7-segment LED displays•I2C EEPROM (24Cxx)•Real time clock (DS1307) with lithium battery and SRAM•8-high current output port (500mA) for driving external loads•Two 12V sugar cube relays•Continuous tone piezo buzzer•Temperature sensor socket with thermostat functions•Four 8-bit A/D converter, one 8-bit D/A converter provided by PCF8591•All port-pins available on 10-pin box header•8 LEDs for easy logic state monitoring•8 input trigger switches using 8 push buttons•ISP programming with Flash ISP for AT89S51/52/8252/AVR•Infrared remote control receiver module IC supported•P89V51RD2BN•AT89S52 Installable software on CD•Programmers notepad : Free, open source, text editor•Flash ISP programmer software for 89SXX•Bascom basic compiler (demo version)•MIDE-51: An IDE for MCS-51 microcontroller•WinAVR : open source C compiler for AVR•Sample programs for peripherals DC 12V/500mA output power supplyEXPERIMENTS• Study of LED blink• Study of dancing light• Study of LCD display• Study of LCD-keyboard display• Study of 7 –segment display• Study of RC5 remote control test program• Study of analog to digital converter• Study of real time clock (RTC) 64 ADVANCE COMMUNICATION ENGINEERING LAB 65 To be familiar with the following network components:THIS WILL BE A FULL PACKAGE OF THE FOLLOWINGS:-** RJ5/CAT5CABLES 100 METERSRJ 45CONNECTORS 100 PCSCUTTER & CRIMPING TOOLS FOR RJ45/CAT-5CABLESCABLE TESTER/TRACKER…….. 4 PCSHUBS WITH ACCESSORIES & TOOL KIT NETWORK INTERFACE DIFFERENT CARD 66 COMPUTER NETWORK LAB 67 Network ComponentsCAT 5/5E/6 cable :100mtrs (Rs 2000/-), RJ 45 Connectors: 200pcs (Rs. 500/- )RJ 45 Crimping Tools: 05(Rs. 800/- each)LAN Cable Tester (RJ 45): 05 (Rs 1000/- each) 68 24 Port managed switchNo. of Ports: 10/100 Mbps 24 Ethernet ports, Switch Fabric: 32 Gbps, Form Factor: Rack Mountable,OS: LAN base Image, Console port: Availavble for configuration, Mac Address table: 4000 or higher, VLAN: Supported, MTU: 9100 with support for jumbo frames, Warranty: 3 years onsite comprehensive warranty including parts and labor plus onsite technical support with 24x7 69 24 Port Unmanaged switch24-port 10/100/1000Mbps Ethernet switch Wifi Router: 300 Mbps wireless router with 4 LAN ports and 1 WAN port 70 8 port HubExternal Power Supply, 8 Nos RJ-45 connectors for 10BASE-T/100BASE-TX,Ethernet Ports 8-Port, Capacity 1.6 Gbps, Wireless Speed 10 / 100 Mbps 71 Access points54 Mbps Access point for wifi network: No.of Channel: Dual channel for support upto 108 Mbps ( 2x54Mbps), Backbone connectivity: connect over Fast Ethernet through backbone switches, Security: Security enabled Wifi connectivity with option for Broadcast of SSID,Network:802.11 a/b/g/n network support, PoE: PoE enabled, Form factor: Wall or ceilling mountable with physical lock suppor. Warranty and support: 3 years on site comprehensive warranty including parts and labour plus on site technical support with 24 X 7 72 LAN TrainerEthernet (IEEE 802.3 wireless LAN (802.11),Token bus ( 802.4) Token ring ( 802.5), Data rate : 10/100 Mbps for ethernet, 1, 2, 5.5, 11 Mbps for wirless & LAN as per IEEE 802.11b, connectivity through RJ 45 connector. 73 Installation & commissioning of network(i) Laying ofOFC & CAT 6 Cable (ii) splicing (iii) Installation & network testing 74 INSTRUMENTATION AND CONTROL LAB (6th sem) 75 To measure displacement with LVDT ACTUAL LVDT WITHINSTRUMENTATION AMPLIFIERDC O/P WITH DIGITAL METER, 3and 1/2 digit LED display with polarity indicator, sensitivity of 10mV/mm in the range of 10mm. 76 To measure temperature with thermocoupleTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 77 To measure temperature with thermistorTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 78 To measure pressure with strain gauge STRAIN GAUGE SENSOR WITH WAIGHT LOADING SYSYTEM SAMPLE WEIGHTS.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR 79 To plot the Characteristics of RTD (PT-100)RTD 3 WAIR SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 80 Temperature controller with on-off controller, Temperature controller with PI controller, Temperature controller with PID controllerTemperature controller with facilities for P, I, D and relay control blocks, Operating temperature: Ambient to 90°C, Separate controls for P, I, D channel gains,Two settings for relay hysteresis, Fast 25W oven fitted with IC temperature sensor, Forced cooling option to ready oven for next experiment, Digital display of set and measured temperature on a 3½ digit built-in DVM, 0-9999 sec, timer on panel for a convenient temperature response experiment, Buffered output for recorder 81 CIRCUIT THEORY LAB 82 Determine the permeability of magnetic material by plotting its B-H curveHysteresis Loop Tracer/ BH Curve apparatus220volt AC, 50Hz supply 83 Series parallel resonance of R-L-C cktKit for Series parallel resonance of R-L-C ckt: The Set-up consist of Power supply (with variable frequency), audio oscillator with digital readout, digital RMS meters and different number of inductors (smoothly variable), capacitors, Rheostat, patch cord & manual. 84 SWITCH GEAR LAB 85 Speed control of Induction motor 1ph by using SCR3Φ, 400V ac, 50HZ.,1HP, 1440 rpm. Speed control using ac back to back configuration of SCRs and to note Speed vs. Load Characteristics at open loop condition. This unit should consist of AC 3Φ Induction Motor (1HP) coupled with a (i) DC Shunt Generator (1HP) for loading and (ii) a DC Tachogenerator to be used for speed feedback control. A DC meter must be provided for displaying the speed of the motor from the Tachogenerator with suitable AC Ammeter and Voltmeter for the measurement (AE Make Panel Type or digital) Sheet Metal enclosure with powder coating paint must be provided. (with foundation & Experiment Table) 86 C.T. & P.T. testing trainer kit C.T. & P.T.testing trainer kit - Variable AC voltage source (0-220V)& variable AC current source (0-25A), CT for 25/5A, PT for 220/110V, Autotransformer for voltage & current adjustment, MCB protection, To determine Ratio error, Phase angle error of CT & PT, with Burden box. , polarity check indicator , range selector switch. 87 Induction type electromagnetic relay* Over Current (IDMTL Electro- Mechanical Type , Model CDG-11 or equivalent) Relay,*PSM, TSM setting* Auxiliary Relay,* Counter /Timer,* D.W. Transformer, * Variac,* Knife Switch,* DC power supply for DC auxiliary relay and the relay,* Portable Ammeter.Necessary panel for the complete set up with wooden (teak wood) table (4x3x2.5) 88 Air Circuit BreakerCut section model 89 Transmission line protection simulation KitOver Current, Earth Fault, Over Voltage, Under Voltage, Directional, Differential, Distance protection 90 POWER PLANT LAB 91 Diesel generator power plantmodel of small diesel generator power plant 92 Hydro power plantmodel of micro Hydro power plant 93 Horizontal axis small wind turbinemodel 94 CSP plantmodel 95 MEASUREMENT LAB 96 Kelvin double bridgeCompletely self contained, stand alone unit with built in power supply, required meters, Standard Resistance, wooden bench, high sensitivity spot light type galvanometer, connecting patch chords and operating manuals. 97 RENEWABLE ENERGY LAB 98 Renewable Energy Labsolar PV plant- Model 99 Renewable Energy Labvertical axis small wind turbine- Model 100 ELECTRIC MACHINE LAB 101 VoltmeterVoltmeter (M.I type) 0-150V/300V/500V 102 VoltmeterVoltmeter (M.I type) 0-20V/50V 103 AmmeterAmmeter (M.I type) 0-5A/10A/20A 104 AmmeterAmmeter (M.I type) 0-1A/2A/5A 105 MultimeterAnalog Multi-meter of ISI marked: DC : 0-200 mV/ 1000 V & 0- 2mA – 10 A,AC : 0 – 200mV/1000V &0-2 mA – 20 A, Resistance : 0 – 200 Megaohm, with shock proof protection & other facilities and operatingmanuals. 106 MultimeterDigital Multi-meter of ISI marked: DC : 0-200 mV – 1000 V & 0-2mA – 10 A,AC : 0 – 1000 V & 0- 2mA– 20 A, Resistance : 0 – 200 Megaohm, with diodetesting, data hold, shock proof protection , auto power off etcfacilities and operating manuals. 107 WattmeterDynamometer Wattmeterof ISI marked : Low Power Factor ( 0.2 ) : Current Rating : 5/10 A , Voltage Rating : 150/300 / 600 V , with anti-parallax mirror , 120 mm scale length , knife edge pointer, mouldedBakelite body, portable. 108 VoltmeterVoltmeter (PMMC type) 0-150V/300V 109 AmmeterAmmeter (PMMC type) 0-2A/5A 110 StarterDC 3-point Starter : 220 V DC , 15 A 111 StarterDC 4-point Starter : 220 V DC , 15 A 112 DC Power SupplyDC Power Supply : Input : 415V, #-Phase AC, 50 Hz;Output : 220V DC , 5 KW of a standard make . 113 RheostatRheostat with sliding Jockey : 100 Ohm , 5 A 114 RheostatRheostat with sliding Jockey : 500 Ohm , 5 A 115 Digital Energy MeterDigital Energy Meter of ISI marked: Three Phase AC , 440 V , Maximum 30 A, 50 Hz with operatingmanual. 116 Digital MeggerDigital Megger for measuring insulation resistance of ISI marked: 250 / 500 V, Maximum 200 Mega ohmwith operating manual 117 VariacSingle Phase Variac of ISI marked : Input:– 230 V AC, Output : 0 – 270 V AC , 1 KVA, 50 Hzof a standard make 118 VariacThree Phase Variac of ISI marked : Input:– 415 V AC, Output : 0 – 500 V AC , 3 KVA, 50 Hzof a standard make 119 Clamp on MeterClamp on Meter of ISI marked : Digital type : For measuring Voltage ( AC/DC ), Current ( AC/DC ) , resistance, Power & Power Factor with operating manuals 120 Phase Sequence IndicatorPhase Sequence Indicator of ISI marked : 50 – 500 V AC, 25 – 60 Hz 121 Frequency MeterFrequency Meter of ISI marked: Digital Type : 240 V, 47 – 99 Hz 122 TransformerSingle-Phase Transformer : 1 KVA , 230 V/115V , 50 Hz( Air Cooled) 123 TransformerThree-Phase Transformer : 3 KVA , 415/230 V , 50 Hz 124 3-Ph Resistive LoadThree phase resistive load : 400 V , 6 KW 125 3-Ph Inductive LoadThree phase inductive load : 400 V , 3 KW 126 3-Ph Capacitive LoadThree phase capacitive load : 400 V , 3 KW 127 3-Ph StarterStar Delta automatic starter for 3 Phase,400 V, 5 Hpmotor 128 3-Ph DOL StarterDOL & Auto -Transformer Starter : 3-phase AC , 400V, 10A, 50 Hz 129 StroboscopeDigital Stroboscope - 10,000 rpm 130 DCGenerator Voltage build UPSupply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Building up Voltage in DC Generator ( Open Circuit / Saturation Characteristics: DC Shunt Motor of ISI marked : 2HP or 5HP, 220 V. Machines will have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and operating manual isalso must.(with foundation & Experiment Table) 131 Brake test in DC Series Motor Supply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , Spring balance & loadings, protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Brake test in DC Series Motor& load Characteristics: DC Series Motor of ISI marked : 2HP, 220 V.Machineswill have to be set on M.S.Channel base with suitable footing/ fixtures and screws etc. and operatingmanual is also must.(with foundation & Experiment Table) 132 Speed Controlof 3-Phase Squirrel cage Induction motorSupply, Installation , Commissioning & Testing with necessary & suitable ISI marked meters such as ammeter, voltmeter, frequency meter , starter, protective devices and all other accessories mounted on a standing panel board as per following specification :For Speed Controlof 3-Phase Squirrel cage Induction motorby – (i) volt /freq control method : Three phase Squirrel cage induction motor : 2HP, 400V with v/f controller.Machineswill have to be set on M.S.Channel base with suitablefooting/fixturesandscrewsetc.includingtheoperating manual.(with foundation & Experiment Table) 133 Load Test of an Alternator & % regulation at various loads with Unity Power factorSupply, Installation , Commissioning & Testing with suitable ISI marked ammeter, voltmeter, starter, star connected load , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Load Test of an Alternator and Determination of%-age regulation at various loads with unity power factor : DC Shunt Motor of ISI marked : 3HP, 220 V , AlternatorISI marked: 2 KVA, 415 V , 50 Hz.Machineswill have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and andoperating manual is also must.(with foundation & Experiment Table) 134 Measurement of Slip of 3-Phase induction motorSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter, stroboscope etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :Measurement of Slip of 3-Phase induction motor by –(i) Stroboscopic& (ii ) Tachometer methods and reversing the direction of rotation of the motor : Three phase squirrel cage induction motor of ISI marked: 2 HP , 415 V , 50 Hz .Machineswill have to be set on M.S.Channel base withsuitable footing/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 135 Synchronization of two 3-Phase alternatorsSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification : Synchronization of 3-Phase alternator ( 2 SETS ) by– (a) Three Lamp & (b) Synchroscope Methods : DC Shunt Motors of ISI marked : 5HP, 220 V ,Alternators of ISI marked: 3 KVA, 400 V, 50 Hz.Machineswill have to be set on M.S.Channel base withsuitable footings/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 136 POWER SYSTEM LAB 137 KIT FOR STUDY OF ACTIVE & REACTIVE POWERWITH SIMULATIOL KIT & LAPTOPStudy of Active & Reactive power with simulator Kit and Laptop with appropriate software, The kit should consist of variable Inductive & Capacitive load to observe change in active & Reactive power 138 MODEL OF VARIOUS TYPES OF TURBINES USED IN POWER GENERATING STATIONSModel Piece of each type of Turbine 139 PYRANOMETERMEASUREMENT OF SOLAR RADIATION BY PYRANOMETER 140 PHOTO VOLATIC SYSTEM USED IN STREET LIGHTWITH SOLAR PLATE,PV CELL,BATTERY,CHARGER 141 STUDY OF POWER SYSTEM OF 6.6 KV/400 V SUBSTATION USED FOR A HOUSING CONPLEXMODEL 142 D.C NETWORK ANALYSERD.C NETWORK ANALYSER FOR STUDY OF DIFFERENT TYPES OF FAULTS 143 DIFFERENT TYPE OF EXCITATIONS SYSTEM USED IN ALTERNATORSTATIC EXCITER,SHAFT MOUNTED,ROTATNG TYPE EXCITER & Brushless exciter ( Model only) 144 MISCELLANEOUS 145 MOTOR-ALTERNATOR SET FOR SYNCHRONISATION OF TWO ALTERNATOR WITH SYCHRONISING PANEL INCLUDING CHECK SYNCHROSCOPE & BULB ARRANGEMENT TO PERFORM TWO BRIGHT ONE DARK LAMP METHOD1.TWO SET OF D.C MOTOR 2.5 KW,230 VOLT,3000 R.P.M WITH SPEED CONTROL ARRANGEMENT 2. TWO SET OF 1 KVA,3 PHASE,440 VOLT,3000 R.P.M ALTERNATOR WITH BASE MOUNTING & EXCITATION SYSTEM. 146 PlierPlier of good quality 147 TesterTester Screwdriver of reputed brand 148 Screwdriver setScrewdriver set of reputed brand
Contract Date: Mar 12, 2026 Contract Value : 33.87 Lakh
Government Departments No of Bidders 9
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : 1.25 Crore
Government Departments No of Bidders 4
Contract Date: Ref. Documents Contract Value : 47.16 Lakh
Government Departments No of Bidders 3
16.
Educational and Research Institute #9596587 AOC
E-Tender For Procurement Of Equipment, Instrument, Machineries, Tools Etc. Related To Laboratories Of Mechanical Engineering, Civil Engineering, Electrical Engineering, Electronics And Telecommunication, Physics Laboratory And Chemistry Laboratory Of K.G. Engineering Institute, West Bengal--1 Colorimeter 2 Ph Meter 3 Conductivity Meter 4 Redwood Viscometer 5 Ables Flash Point Apparatus 6 Inverse Square Law And Compare The Difference In Output Luminisence Of Incandescent, Fluroscent, Cfl Study Panel 7 Schering Bridge 8 A Panel Containing All Individual Pilot Devices Fully Operational , Their No, Nc Contact Can Be Used In The Circuit And Their Operation Can Be Monitored Through Output Led Indication Light 9 Variable Inductance Box 10 Trainer Kit To Study Series Inverter Using Scr 11 Panel For Speed Control Of Ac Induction Motor By V / F 12 Digital Ic Trainer 13 1. To Study Dol Starter Using Induction Motor 2. Automatic Star Delta Starter Using Plc 3. Speed Control Of Dc Shunt Motor With Pid Control Using Plc4. Control Circuit Operation Of 3 Sequential Motor Operation Using Plc 14 Motor Braking Method System 15 To Calibrate Single Phase Energy Meter Using Resistive And Inductive Loads. 16 Demonstrate Different System Faults Using Dc Network Analyser. 17 Single Stage Rc Coupled Fet Amplifier 18 Anderson Bridge 19 To Demonstrate D / A Conversion Using Kit 20 To Demonstrate A / D Conversion Using Kit 21 1. To Fabricate An Op-Amp Integrator, Determine Its Amplitude, Phase Relation With Input, Duration Of Output Pulse Compared To Input. 2. To Fabricate An Op-Amp Differentiator, Determine Its Amplitude, Phase Relation With Input, Duration Of Output Pulse Compared To Input For A Triangular Input. 22 To Fabricated With Ic-555 ( A ) Astable Multivibrator & To Determine Duration Of High Pulse And Duty Cycle. ( B ) Monostable Multivibrator & To Determine The Duration Of High And Low Pulses Triggered Condition With Different R-C Values.A Pulse Width Modulation Circuit To Observe The Variation Of Duration Of High Pulse With The Various Values Of Control Voltage At Control Input Terminal Of Ic-555. 23 Ups Trainer Kit 24 To Determine Candle Power Of A Lamp In Comparison To Standard C.P. Of Lamp By Optical Bench Method. 25 Bh Curve Apparatus 26 Digital Multimeter ( 200 Mv To 1000 V Dc, 200Mv To 500 V Ac ; 10A, 1Ωto 20Mω , 1000 Μf, Transistor & Diode Testing ) 27 Variable Dcpower Supply ( Dual Supply , 0V - ±30V , 2A , ±3 -±15V , 1A, 5V, 5A Fixed, Digital Display ) 28 Diode Trainer 29 Rectifier Trainer 30 Oscillator Trainer 31 Multivibrator Trainer 32 Amplifier Trainer : Bjt 33 Feedback Amplifier Trainer 34 Tuned Amplifier Trainer 35 Clipper & Clamper Trainer 36 Trainer Kit For Two Stage Rc Coupled Transistorized Amplifier : 37 Trainer Kit Transistorized Complimentary Symmetry Push Pull Amplifier : 38 Frequency Modulation / Demoduiation Trainer 39 Ask / Psk / Fsk Modulation And Demodulation Kit 40 Pulse Code Demodulation System Trainer 41 Function Generator 42 Trainer Kit To Study Reverse Recovery Characteristics Of Power Diodes 43 Single Phase Reectifier &Controlled Rectifier Ckt Using Scr Kit 44 Dc Motor Thyristorised Speed Control Trainerkit 45 Single Phase Bridge Invertertrainer 46 Step Up Chopper Trainer 47 Smps Trainer 48 Single Phase Controlled Rectifier Trainer Using Scr 49 Advanced 8051 Microcontroller Tariner With Pc And Accessories 50 Advance Microprocessor Trainer 8086 / 88 With Pc And Accessories 51 Strain Gauge Trainer Kit 52 Lvdt Trainer Kit 53 Thermocouple Trainer Kit 54 Thermister Trainer Kit 55 Rtd Trainer Kit 56 Calibration Of Compression Testing Machine ( 1000 Kn Capacity ) 57 Replacement Of Touch Pannel Box Of Compression Testing Machine ( 2000 Kn Capacity ) 58 Replacement Of Sensorof Compression Testing Machine ( 2000 Kn Capacity ) 59 Repair And Servicing Of Old Universal Testing Machine 60 Concrete Core Cutter ( Portable ) 61 Rebar Locator ( Metric Scale Hand-Held Unit With Charger In Carrying Case ) / Profometer 62 Digital Rebound Hammer With Calibration Anvil ( For Concrete Compressive Strength Analysis In The Field And Material Hardness Testing ) 63 Ductility Testing Apparatus 64 Metric Chain 20 M 65 Metric Chain 30 M 66 Ranging Rod ( Made Of G.I. / M.S. ) 67 Total Station 68 Permeability Test Apparatus With Accessories 69 Liquid Limit Device, Motorised 70 Triaxial Test ( With Pore Pressure Arrangement, Digital ) 71 Unconfined Compression Test Apparatus 72 Cbr Test Apparatus 73 Sand Replacement Apparatus [ Big ] 74 Sand Replacement Apparatus [ Small ] 75 Digital Analytical Balance ( 220 G / 0.1Mg ) 76 Electronic Balance, Capacity 2 Kg. 77 Electronic Digital Balance ( 25Kg / 1G ) 78 Jar Test Apparatus ( Digital ) 79 Epicyclic Gear Train & Holding Torque Apparatus 80 Rope Brake Dynamometer 81 Stainless Steel Four Bar Chain Mechanism 82 Cam Analysis Apparatus 83 Universal Governor 84 Impact Of Jet On Vanes Apparatus 85 Flow Over Notch Apparatus 86 Pelton Wheel Turbine 87 Reciprocating Pump Test Rig 88 Centrifugal Pump Test Rig 89 Bernoullis Theorem Apparatus 90 Vmc Double Pallet Kira Vertical Machining Center 91 Fostex Universal Dividing Head 92 Digital Rockwell Cum Brinell Tester 93 Izod Charpy Impact Testing Machine 94 Torsion Testing Machine 95 Mild Steel Universal Testing Machine 96 Tools For Lathe And Milling 97 Vapour Compression Refrigeration Test Rig 98 Portable Tig And Arc Welding Machine Setup With Argon Cylinder And Regulator 99 Separating Throttling Calorimeter For Dryness Fraction Measurement 100 Models Of Lancashire, Cochran, Babcock And Wilcox Boiler 101 Slide Calipers / Vernier Calipers 102 Screw Gauge / Micrometer 103 Optical Bench Set-Up 104 Hookes Law Apparatus 105 Friction Table Set-Up 106 Spring Balance ( Hanging Type With Rectangular Shape ) 107 Retort Stand 108 Laboratory Flywheel ( Wall Mountable ) 109 Linear Expansion Apparatus / Pullingers Apparatus ( Vertical Type ) 110 Steam Boiler With Bung / Stopper 111 Electrical Bunsen Burner 112 Lpg Gas Hose Pipe 113 Rubber Tube 114 Fortin’S Barometer With Case 115 Ohms Law Apparatus 116 Kirchoffs Law Apparatus 117 Resistance Box 118 Fractional Resistance Box 119 Galvanometer To Ammeter Box Set-Up 120 Galvanometer To Voltmeter Box Set-Up 121 P-N Junction Diode Set-Up 122 Galvanometer 123 Spirit Level 124 Multimeter 125 Screwdriver Kit
Contract Date: Nov 14, 2024 Contract Value : 64.02 Lakh
Government Departments No of Bidders 15
West Bengal View Result →
18.
Drinking Water Supply and Sanitation #9513897 Technical Bid
Tender for Kalpi Npp Water Supply Scheme District Jalaun Construction Of Intake Footbridge Wtp Oht Rising Main Distribution System And Electrical Mechanical Works Under Kalpi Npp Water Supply Scheme District Jalaun - W.T.P -Design (hydraulic and structural ), construction, (including topographical survey, geotechnical investigation and other Surveys as required) for specified capacity of WTP based on 20 Hrs. operation including inlet chamber, aeration fountain / cascade, inlet channels ,chemical building ,including mechanical/manual fine/coarse screens, flash mixer, mixing channel with Parshall flume and flow measuring arrangement, clariflocculator with conventional, filter house and filter plant including back wash tank and back wash pumps with 100% standby, chemical house, coagulant feed tank with feed mechanism, poly aluminium chloride (PAC) or other coagulant tank of specified capacity and nos. with mixing and dosing arrangement complete, vacuum feed gas chlorinator with 100% standby ,safety equipment’s &EOTcrane,pressureandleveltransmitterfor pumpingplant,turbidity, TDS, PHAnalyzer,chlorineanalyzer,ROFTandLOHTforfilter house,flowtransmitterultrasonic/electromagneticatinletandoutletandFilter backwashwithentirepipingsystem , sludge handling unit and recycling of collected water from sludge , etc. complete to achieve desired perameters of clear wateras specified in tender document andin accordace letest C.P.H.E.E.O.Manual,/ltest guidline/ I.S. Codes/Govtt. Orders . All WTP scada Opratedexternal and internal electrification, laboratory building with all specified lab equipment, admin building,Sub station building (L.T./H.T. Room), Platform for Transformer,Meter Room ,chlorine Room,Staff Quarter (Type III-one Number), sanitary block with necessary water supply and drainage arrangement, campus roads (Interlocking Road/C.C.Road), landscaping( earth filling up to 115.00level including levelling and dressing of Campus )and other campus development works with rain water harvesting and garden, etc. all required works complete as per the direction of Engineer-in-Charge in Pile Foundation .The WTP shall be fully automatic prefrablybased onRapid sand gravity filter or any proven technologysuitable to treat Raw water from yamuna river throug out the year , PLC/SCADA with real time remote monitoring system and online contineuous effluent monitoring systemincluding Soil testing, Design ,S/o all labour ,material T&P etc. required for proper completion of the work as per letest IS Codes ,manuals ,instruction of engineer in charge and tender document. 2 INTAKE WELL- Supply of all materials, labour, T&P etc.as requiredforDesign and construction of Intake- well - cum - pump house of 9.0 m. internal dia. The intake well upto floor level shallbe firmly based on suitable foundation made with well sinking tecgnology including construction of coffer damand Annular raft/ well foundation , including construction of 1.20 m. wide R.C.C. balcony at plinth level, construction of Pump House made of brick masonry, duly embraced within R.C.C. column, and fitting of doors and windows, making opening arrangement at floor level of pump house (9.00 m. dia and 6 m. height)and construction of 1.20 m. wide R.C.C. balcony at Pump house floor levelincluding S.S. Rolling Shutter, steel cage hinged with locking arrangement, duly supported on steel girder. Plateform for transformer ,meter room andSubstation Building (HT pannel room,LT pannel room ) Ventilator arrangement along with fixing of required size dia. DID/F pipesand Sluice Valves- 3 Noat inlet etc. as per site requirement or as per the design. The work also includes steelrailing(grad 304 ) in three rows on both sides of pump house balcony and fixing of 0.5m. wide M.S. ladder made of 50 x 50x 6mm. angle iron ladder from floor of pump house to floor of intake well, duly supported on R.C.C.landing at suitable interval. The ladder shall run spirally inside the intake well and each landing shall be supported on R.C.C. M.S. channelpost, spaced not more than 1.5 m. interval including Construction of R.C.C. foundation block as required also include provision for dismantling and reinstatement of stone pitching,removal earth of Coffer dam to maintain flow through-out the year ,Approch roadup to Approch bridge etc up to completion of work as per insrtuction of engineer in charge and tender document . 3 The floor of pump house & balcony shall be of Kota Stone etc. complete. Frames for doors / Shutter shall be made of 50x50x5 mm. M.S. angle iron and ionized and shall be partly panelled and glazed, made of suitable steel sections, conforming to relevant BIS. The work also includes painting of all concrete surfaces with three coats of approved paint and painting of pipes, doors, windows with anticorrosive paints including design of intake well, foot bridge, pump house etc. considering seismic and other forces as per relevant BIS requirements. 4 Design and construction of 4.0 mts. wide R.C.C Foot bridge from Intake well to bank of river for length of 350 mtsminimum height of foot over bridgeslab should be equal to level of floor level of Pump House. pier of bridge in well shinking foundation minimum two Beam below deck slab with bearing support. Provision for padestal construction to rising main pipe fixing with anchor Clamping ,casing pipe for electric cables . Also including Supply& fixing ofstainless steel (gread 304) railing both sides of foot bridge , floor shall be plain chequered tiles, Statinless steel gate at entry gate of Approch bridge with locking arrangmentsup to completion of work as per insrtuction of engineer in charge and tender document . 5 Construction of R.C.C Over Head Tank (OHT)Supply of all the materials, labour T&P and construction of a R.C.C. Over head tank above ground level with main components, based on IS-3370 and IS 11682 or liquid storage concrete in over head tank and foundation concrete as per specification in I.S. 2911.Following capacity/StagingAll Components of OHT will be casted in M-30 concrete with cement, coarse sand and approved stone grit asI.S. 456.Minimum depth of founditation below original ground level will be 2.0 M and in pile Foundation .Seismic effects and wind load should be taken into consideration as I.S. 1893for earthquake resistance and I.S. 875 part-III for wind load on structure. The asumed bearing capacity of soil has been taken as 8 M.T. sqm.1m wide RCC stair case from ground lavel to balcony.M.S. ladder made of 50 X 50 X 6 mm angle section and 20 mm plain M.S. bars (specification of M.S. should be as per IS 800-2007) with hand rails of 20 mm medium class G.I. pipes on both sides in three rows from balcony to top dome resting on an RCC plateform (75 X 75 cm and 10 cm thick) projecting from top ring beam and one alluminium ladder inside the tank body (from manhole to tope domto bootom dome). 6 1 m wide R.C.C. balcony around the tank at the junction point of vertical wall and conical wall.Proper R.C.C. railing and 20 mm dia medium class G.I. pipe (in 3 rows) on both sides of stair case, arround the balcony at each landing from landing with top ring beam upto manhole on the top dome and at the periphery. The G.I. pipes will be supported on R.C.C. postsof 100 mm dia or on the posts made of 50 X 50 X 6 mm M.S. angle section, spaced at intervals not more than 1.5 m.Proper ventilator at top dome in circular shape of 1.2 m dia along with an R.C.C. cover of minimum 1.50 m dia and 7.5 cm thickness, pillar of vintilator should be minimum 50 cm dia. The space between top dome and R.C.C. cover should be covered with mosquito net of standered qualitity along with expended mentaled jail.Electro Megnatic Flow Meter.Lightening conductor as per I.S.S. 2309 of its latest amendments of latest electricity rules. It should consistproper elevation rod with 5 or more fork points proper down conductors of prescribed mental of proper size prescribed by ISS 2309-1969 and ISS 3013-1966.D.I. manhole of min 60 X 60 cm size made of M.S. channel section with adequate cover made of M.S. sheet of minimum 3mm thickness hinged with manhole with locking arrangment. This manhole should be fixe at top dome at proper place.including soil testing from govt institute as per tender document andrelevent IS codes. 7 Zone -1 1300KL/22M 8 Zone -21100KL/25M 9 Zone -3 2400KL/22M 10 Zone -4 300KL/25M 11 CONSTRUCTION OF R.C.C CLEAR WATER RESERVIOUR (C.W.R) CUM PUMP HOUSE OF VARIOUS AT DIFFERENT SITE Design & supply of allmaterial T&P etc and constructRCC CWR cum pump house offollowing capacity with HT, L.T and meter room, GI pipes railling consisting of 3 rows of 20 mm dia G.I pipe and angle iron posts of the dome periphery, S.S ladder from ground level to top of tank and inside the tank, locking device, ventilator, supply and fixing digital level indicator, 25mm PCC 1:2:4 over 80mm PCC 1:4:8 in apron, 150 mm semicircular drain around the tank, two coats of apex paint and testing of tank for water tightness etc. and also including the cost of supply and fixing of all necessary pipes and valves etc all complete as per approved design and drawing.including soil testing from govt institute as per tender document andrelevent IS codes. 12 1200kl (MCWR) 13 Demolition of R.C.C Over Head Tank (OHT)Dismantling of ESRs of various capacities and heights using crane (10 MT capacity) and handing over M.S./ C.I./G.I. pipes, valves, bends, etc. to the Department. However taking steel reinforcement by the dismantling agency and other defung buildings like staff quarters, damaged pump house including removing dismantled materials from site and disposing them at suitable place as directed, etc. complete.Capacity of E.S.R. upto 2 lakh litres and staging upto 12 M heightZone -1 500KL/12M 14 Zone -2 -400KL/12M 15 Raw Water Rising Mains From Intake To WTPExcavation for pipe line in ordinary soil (loam, clay, sand) with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 50 meters. 16 500 mm DI K-7(yamuna river to WTP) 17 Supply of ISI mark DI K-7 S&S pipes (push on joints) with supply of allDI specials of following class and diameters inclusive of jointing material (Rubber gasket of EPDM Quality IS 12820 / 1989) conforming to IS 8329/2000 for its latest ammendment F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection chacking and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete 18 500 mm DI K-7(yamuna river to WTP) 19 Lowering, laying and jointing with ruber gasketsD.I. K-7/ D.I. K-9 of various classes with DI / MS specials of following diameter in proper position also fixing of pipe on foot over bridge, grade and alignment including conveyance of material to site of work. It also includes cost of jointing materials and rubber rings labour,hydraulic testing etc. complete. 20 500 mm DI K-7(yamuna river to WTP) 21 Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete. 22 Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 - 500 mm 23 -Air valves as per IS 14845 : 2000-100 mm 24 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge. 25 Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 - 500 mm 26 Kinetic Double Air Valves-Air valves as per IS 14845 : 2000-100 mm 27 R.C.C. Thrust block with cement, core sand, and 20mm gauges stone ballast in propotion of 1: 1.5:3 in thrust block of pipe line including reinforcementand its bending the same with 0.08 mm thick binding wire in position and necessary shuttring including proper curing and supply of all materials, labour and T&P etc required for proper completion of work. 28 Providing reinforcementincluding cutting bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete (including cost of binding wire and MS Bar) 29 Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design. 30 Sluice valve Chamber 500mm 31 Air valve Chambers -Air valves as per IS 14845 : 2000-100 mm 32 Rising MainsSupply of ISI mark DI K-7/K-9 S&S pipes (push on joints) of following with D.I. specials and diameters inclusive of jointing material (Rubber gasket of EPDM Quality IS 12820 / 1989) conforming to IS 8329/2000 for its latest ammendment F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection chacking and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete 33 125 D.I K-9 34 200 D.I K-9 35 350 D.I K-9 36 400 D.I K-9 37 Excavation for pipe line in ordinary soil (loam, clay, sand) with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 50 meters.0 to 1.5 m depth 38 Lowering, laying and jointing with SBR ruber gasketsD.I. K-7/ D.I. K-9 of various classes with DI / MS specials of following diameter in proper position, grade and alignment including conveyance of material to site of work. It also includes cost of jointing materials and rubber rings labour,hydraulic testing etc. complete. 39 125 D.I K-9 40 200 D.I K-9 41 350 D.I K-9 42 400 D.I K-9 43 Supply of following type ofDI valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. completeDouble flanged Ductile Iron Sluice valves as per IS 14840 : 2000./Air valves as per IS 14845 : 2000 including Sluice valve of Isolation 44 125 mm D.I D.F. 45 200 mm D.I D.F. 46 350mm D.I D.F. 47 400 mm D.I D.F. 48 25 mm D.I D.F. 49 50 mm D.I D.F. 50 80 mm D.I D.F. 51 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 /Air valves as per IS 14845 : 2000 52 125 mm D.I D.F. 53 200 mm D.I D.F. 54 350mm D.I D.F. 55 400 mm D.I D.F. 56 25 mm D.I D.F. 57 50 mm D.I D.F. 58 80 mm D.I D.F. 59 Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design. 60 Sluice valve Chamber (MASONRY TYPE) 61 Air Valve Chamber 62 R.C.C. Thrust block with cement, core sand, and 20mm gauges stone ballast in propotion of 1: 1.5:3 in thrust block of pipe line including reinforcementand its bending the same with 0.08 mm thick binding wire in position and necessary shuttring including proper curing and supply of all materials, labour and T&P etc required for proper completion of work. 63 MS work in plain RCC incluiding bending supply wastage overlaping etc complete 64 Provision for crossing of Nalas/culvert for laying of pipe line usingsuitable dia. and length 0.60 m more than the outer width of nala, labour, T&P, necessary arrangement for diversion & pumping of water if required, barricading etc required for proper completion of work as per directions of engineer-in-charge.(up to 3.50m wide) 65 NHAI crossing by trenchless technologyProviding and laying of 700 mm dia MS casing pipe 12 mm thick by trenchless technology under railway track with outside PU coating of 1000 micron and inside PU Coating of 500 micron alongwith Providing & Laying of Carrier pipe of dia 400 mm, 8.0 mm thick with outside PU coating of 1000 micron & inside PU Coatingof 500 micron including, providing and fixing of speed restriction caution board as per railway norms and 80 mm. dia GI drain and vent pipe, Providing and fixing the end seal on both ends to plug the annular space between casing and carrier pipe & under ground probe radar survey to check any underground abstruction before finalizing the alignment and to take precautionary measures from power supply distribution. 66 Railway crossing by trenchless technologyProviding and laying of 250 mm dia MS casing pipe 12 mm thick by trenchless technology under railway track with outside PU coating of 1000 micron and inside PU Coating of 500 micron alongwith Providing & Laying of Carrier pipe of dia 125 mm, 8.0 mm thick with outside PU coating of 1000 micron & inside PU Coatingof 500 micron including, providing and fixing of speed restriction caution board as per railway norms and 80 mm. dia GI drain and vent pipe, Providing and fixing the end seal on both ends to plug the annular space between casing and carrier pipe & under ground probe radar survey to check any underground abstruction before finalizing the alignment and to take precautionary measures from power supply. 67 Dismantling of following type of road surfaces for laying of pipe line n work including sorting out of serviceable materials and disposal of unserviceable materials. 68 Bituminious Road 69 Cement Concrete Road 70 Re-instatement of following type of road surfaces after laying of pipe linework including supply of all materials, labour, T&P etc. requuired for proper completion of the work as per direction of engineer-in-charge. The quantity of re-instatement has been increased by thirty percent in the view of additional damaged of dismantled road due to traffic / vehicle movement. 71 Bituminious Road 72 Cement Concrete Road 73 Distribution Network .Supply of ISI Marked or its relevant code HDPE Pipes and Electrofusion specialsof follwing sizes (Dia in mm) with jointing materials, specials of sizes required during constructionas per latest I.S.Samandement upto site of work included loading unloading cartage insurance, etc all completed but exclusive of GST in various zone as per the drawing and approval to Engineer 74 HDPE PIPE GRADE PE 100/ PN 6- 90 mm 75 HDPE PIPE GRADE PE 100/ PN 6- 110 mm 76 HDPE PIPE GRADE PE 100/ PN 6- 140 mm 77 HDPE PIPE GRADE PE 100/ PN 6- 160 mm 78 Supply of ISI Marked or its relevant code DI K-7 Pipes and Specials of follwing sizes (Dia in mm) with jointing materials, during construction as per latest I.S amendement upto site of work included loading, unloading, cartage insurance, etc all completed but exclusive of GST in various zone as per the drawing and approval to Engineer 79 D.I. K-7/ 200 mm 80 D.I. K-7/ 250 mm 81 D.I. K-7/ 300 mm 82 D.I. K-7/ 350 mm 83 D.I. K-7/ 400 mm 84 D.I. K-7/ 450 mm 85 Supply of following size ofSluice Valves/ Scour Valves,capable for working pressure of 10 kg/cm2 Fire hydrants & Air Valves as per relerelavent I.S.I or its latest amandement. Up to store Including loading, unloading & cartage, taxes duties insurance etc all complete. As per IS: 2906-1969. /Air Valve as per as I.S : 14845D.I. D/F Sluice valve/ Scour valve 86 25 mm. dia DI D/F 87 50 mm. dia DI D/F 88 100 mm. dia DI D/F 89 150 mm. dia DI D/F 90 200 mm. dia DI D/F 91 250 mm. dia DI D/F 92 350mm. dia DI D/F 93 Fire hydrant (80 mm dia.) 94 Excavation for pipe line trenches in Ordinary soil requiring use ofspecialT&P etc. with lift upto 1.5 m lead upto 50 mincluding filling back of excavated earth into trenches and watering ranmming dressing and removal of surpluas earth upto 50.m including supply of alllabour T&P etc complete and as per direction of engineer incharge. 95 Cartage fromstore to site of work for following size (dia in mm)HDPE pipes andElecrofusion Specialsand lowering the same into trenches and laying true to alignment and gradiant including testing of pipe lines cuttings of pipes for making up the length and making joints with electrofusion couplers, bands, tees, endcap etc. with electrofusion machinery including all jointing materials, labour, T&P etc required for proper completion of work. (excluding cost of trenching) 96 HDPE PIPE GRADE PE 100/ PN 6- 90 mm 97 HDPE PIPE GRADE PE 100/ PN 6- 110 mm 98 HDPE PIPE GRADE PE 100/ PN 6- 140 mm 99 HDPE PIPE GRADE PE 100/ PN 6- 160 mm 100 Cartage of DI K-7 pipes and specials of following size (dia in mm) , lowering them into trenches and laying true to alignment and gradiant including testing of pipe line but excluding cost of trenching including all supply of Labour T&P etc complete required for proper completion of work. 101 D.I. K-7/ 200 mm 102 D.I. K-7/ 250 mm 103 D.I. K-7/ 300 mm 104 D.I. K-7/ 350 mm 105 D.I. K-7/ 400 mm 106 D.I. K-7/ 450 mm 107 Carting of following size of Sluice Valves/ Scour Valves Fire hydrants & Air Valves from store to site of work and lowering them into the trenches, fixing in position and jointing them with Pipe line and testing etc including supply of jointing materialand also including supply of all material and construction of suitable P.C.C Support below fittings etc. complete.D.I. D/F Sluice valve/ Scour valve/ air valve 108 25mm dia 109 50 mm dia 110 100 mm dia. 111 150 mm dia. 112 200 mm dia. 113 250 mm dia. 114 350 mm dia. 115 Fire hydrant (80 mm dia.) 116 R.C.C. Thrust block with cement, core sand, and 20mm gauges stone ballast in propotion of 1: 1.5:3 in thrust block of pipe line including reinforcementand its bending the same with 0.08 mm thick binding wire in position and necessary shuttring including proper curing and supply of all materials, labour and T&P etc required for proper completion of work. 117 Thrust Block 118 Supply of all matarial labour T&P etc and constuction of following type of chamber as per type design & drawing & as per diretion of engineer incharge . 119 Sluice valve chamber 120 Scour Valve Chamber 121 Air Valve chamber 122 Fire hydrant chamber 123 Flow Meter chamber 124 Provision for Nala/ Culvert crossing including all materials, labour and T&P etc. complete. It includes supply of D.I. pipe of necessary size for encasing, cement concrete and Brickwork for pillars and any other job for proper completion of work. 125 For crossing ofnalla/culvert upto 3.5 m wide(90mm dia to 110mm dia ) 126 For crossing ofRoad upto3.5 m wide(90mm to 110mm ) 127 For crossing ofRoad upto7.0. m wide(90mm to 110mm) 128 Dismantling of following types of roads including sorting out of servicable matarials stacking and disposal of unservicable matarials with in a distance of 50 m. including supply of labour specials T&P etc. required for proper completion of work 129 Interlocking tile 130 C.C Road 131 Bituminous Road 132 B.O.E Road 133 Reinstatement of following types of roads including sorting out of servicable matarials stacking and disposal of unservicable matarials with in a distance of 50 m. including supply of required new matarials & reinstatement the same includng supply of labour T&P etc. required for proper completion of work. 134 Interlocking tile 135 C.C Road 136 Bitumenous Road 137 B.O.E Road 138 NEW HOUSE CONNECTIONMaking House Connectionwith Distribution main with elecrofusion saddle and fittings ,brass ferrule and Tap ,HDPE /GI pipe , including Reinstatement of road after Dismantling of road , supply, cartingofspecialsloweringtheminto trenches , fixing them including bailing out of water necessary excavation for connection including all labour , T&P etc. required for proper completion of the work as per instruction of engineer in charge and tender document. 139 In C.C. Roads 140 For 90 mm to 110mm dia 141 For 125 mm to 160 mm dia 142 For 200 mm to 250 mm dia 143 For 300 mm to 350mm dia 144 For 400 mm to 500mm dia 145 In Bitumenous Roads 146 For 90 mm to 110mm dia 147 For 125 mm to 160 mm dia 148 For 200 mm to 250 mm dia 149 For 300 mm to 350mm dia 150 For 400 mm to 500mm dia 151 In B.O.E. Roads 152 For 90 mm to 110mm dia 153 For 125 mm to 160 mm dia 154 For 200 mm to 250 mm dia 155 In C.C. Interlocking Tiles Roads 156 For 90 mm to 110mm dia 157 For 125 mm to 160 mm dia 158 For 200 mm to 250 mm dia 159 For 300 mm to 350mm dia 160 For 400 mm to 500mm dia 161 In Kacha Roads 162 For 90 mm to 110mm dia 163 For 125 mm to 160 mm dia 164 For 200 mm to 250 mm dia 165 For 300 mm to 350mm dia 166 SHIFTING OF HOUSE CONNECTIONMaking House Connection with Distribution mainwith elecrofusion saddle and fittings ,brass ferrule and Tap ,HDPE /GI pipe ,including Reinstatement of road after Dismantling of road , supply, cartingofspecialsloweringtheminto trenches ,fixing them including bailing out of water necessary excavation for connection including all labour , T&P etc. required for proper completion of the work as per instruction of engineer in charge and tender document. 167 In C.C. Roads 168 For 90 mm to 110mm dia 169 For 125 mm to 160 mm dia 170 For 200 mm to 250 mm dia 171 For 300 mm to 350mm dia 172 For 400 mm to 500mm dia 173 In Bitumenous Roads 174 For 90 mm to 110mm dia 175 For 125 mm to 160 mm dia 176 For 200 mm to 250 mm dia 177 For 300 mm to 350mm dia 178 For 400 mm to 500mm dia 179 In B.O.E. Roads 180 For 90 mm to 110mm dia 181 For 125 mm to 160 mm dia 182 For 200 mm to 250 mm dia 183 In C.C. Interlocking Tiles Roads 184 For 90 mm to 110mm dia 185 For 125 mm to 160 mm dia 186 For 200 mm to 250 mm dia 187 For 300 mm to 350mm dia 188 For 400 mm to 500mm dia 189 In Kacha Roads 190 For 90 mm to 110mm dia 191 For 125 mm to 160 mm dia 192 For 200 mm to 250 mm dia 193 For 300 mm to 350mm dia 194 Building worksSupply of all materials, labour, T& P, complete and construnction of a Half set of One No.Single Roomed staff quarters for Operator staff, pump operator, chaukidaar, pump attendent and other as per approved design in pile Foundation. 195 Zone-1 196 Zone-2 197 Zone-3 198 Zone-4 199 At wtp campus 200 Supply of all materials, labour, T& P, complete and construnction other as per approved design in pile Foundation.For Construction of general resedential staff quarters(type-II) 1nos of 2 half set of area 57.70sqm. 201 Supply of all materials, labour, T& P, complete and construnction other as per approved design in pile Foundation for Construction of following type of ancliary buildings Master Control Room(5x4.5x4m) 202 Construnction of Boundary Wall including supply all materials, labour, T&P etc required for proper completion of work as per Approved design in pile foundation. 203 Water Campus Zone 1 204 Water Campus Zone 2 205 Water Campus Zone 3 206 Water Campus Zone 4 207 AT wtp campus 208 Supply and fixing 3.60 M & 1.20 M wide MS Gate with pillars including fabrication and supply of steel and construnction ofboundary pillars etc complete. 209 Provide all materials, labour, T&P etc Required for proper completion of work and construct Interlocking Tiles approach road, laid dry and joints intact with coarse sand mortar including preparation of base etc 210 Water Campus Zone 1 211 Water Campus Zone 2 212 Water Campus Zone 3 213 Water Campus Zone 4 214 Construnction of Drain in Water works Campus30 x 30 cm including labour material and t&p all complete 215 Zone-1 216 Zone-2 217 Zone-3 218 Zone-4 219 Filling of earth of lower portion including levelling and dressing at water works 220 E&M works 221 RAW WATER PUMPING PLANT ATINTAKE WELL 222 Supply of Vertical type oil lubricated statically, dynamically, hydraulicallybalancedturbinepumpcapableofdischargingat980 rpm the following duty condition as given below due to all causes with surface discharge head confirming to IS:1710 and as amended as on date with accessories as per IS 5120/1977(Reconfirmed 2011) and as amended thereafter to suit the site condition.The Pump Bowl assembly shall be FG: 260with 2% NiCi with CF8M impeller running at 980 rpm., head shaft, SS-410 line shaft , Rubber line shaft bearing , C.I. Bearing retainer, Suction bell mouth, strainer, oil tube and 24mtr/suitablelengthcolumnassembly,withverticalSolidshaft Squirrel cage induction motor copper wounded and die cast copper rotor (IS:126152011/IEC 60034-1) suitable for the above pump continuousratedTEFCIP-55withClassFinsulation,antirotation locking arrengementfor operation in AC, three Phase/50 HZ (±5%), 415V (±10%), running with a speed of pump.CAPACITY:- 6000 LPM / 35 Mtr. HEAD / 75 HP MOTOR (2w+1s) 223 MAIN PIPING AND VALVES :- 224 Supplyof250 mm dia DIDFSingleDoor/MultiDoorNonreturn/refluxvalve conforming to IS:5312/2003(part I & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 225 SupplyofDIDFsluicevalvewith Electricallyintegratedactuater (Totally enclosed, weather-proof and dust proof construction with IP- 67 (IP-68 for field installation),protectionclasssuitableforinstallation inanypositionwithout lubrication, leakage or other operational difficulty with special grease filledgearboxandsuitableformanualoperationforemergency which will automatically dis-engage on restoration of power to motor andwith10wattsinglephasespaceheaterandcontinuouslocal mechanicalpositionindicatorandindividuallyreplaceablecounter gear assembly and with two torque and four limit switches with S.S. flapandoperatedwithgeardrivencamsandofrating250Volt,5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated with positioning card suitable to SCADA operation sluice valve havingBody : DI GGG 40 / IS 1865 Gr. 400/15, Wedge : DI GGG 40 /IS 1865 Gr. 400/15, Dome : DI GGG 40 / IS 1865 Gr. 400/15, Wedge Nut: Brass / Al. Bronze , Spindle : SS AISI 410 , Seat Rings : LTB IS : 318 Gr. LTB 2,Spindle Nut : LTB IS : 318 Gr. LTB 2 .Valves generally conform to IS:5312.Flanges to be drilled as per IS:1538 Part-IV &VI.Valvesare suitablefor hydrostatictestpressureof10Kg./Cm2forseatand15Kg./Cm2for body(PN-1.0)of following sizes 226 250 mm dia size at Pump delivery 227 350 mm dia size at common header 228 SupplyofDIDF manuallyoperatedsluicevalvehavingBody : DI GGG 40 / IS 1865 Gr. 400/15, Wedge : DI GGG 40 /IS 1865 Gr. 400/15, Dome : DI GGG 40 / IS 1865 Gr. 400/15, Wedge Nut: Brass / Al. Bronze , Spindle : SS AISI 410 , Seat Rings : LTB IS : 318 Gr. LTB 2,Spindle Nut : LTB IS : 318 Gr. LTB 2 .Valves generally conform to IS:5312.Flanges tobedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0 Rating) Sluice Valve of 350 mm dia size at By-pass 229 Supply and fabrication of main piping of following sizes350 x 250 x 350 mm MS D/F Tee (10 mm thickness) -3 No250 mm MS D/F Pipe 0.50 mt. (10 mm thickness) - 3 No 250 mm MS D/F Pipe 1.00 mt.(10 mm thickness) - 3 No 350 mm MS D/F Pipe 1.00 mt.(10 mm thickness) - 3 No 350 mm MS D/F Pipe 2.00 mt. (10 mm thickness) -1 No 350 mm MS D/F (10 mm thickness) Bend 90o - 2 No 350 mm Blind Flange - 1 NoNecessary G.I. Nut Bolt’s & Rubber Packing - 1 Lot 230 SupplyofD.I./D.F.DismantlingJointsisavariablelengthDouble Flanged Short Piece constituted by a flange / Spigot Tailpiece inserted into the other Tailpiece which allows the distance between the two flangestobevariedwithincertainlimitsthusprovidingavariable distance piece between two fixed flange end devices like Pumps and Valves. The Dismantling Joint to be supplied complete with Sealing RubberGasketsofEPDMquality(IS:5382/1985Type-4),CastIron Follower Glands and Mild Steel (Zinc Coated) Nut Bolts of Following size 231 Dismantling joint 200 mm dia size at pump delivery 232 Dismantling joint 350 mm dia size at common header 233 Suitable capacity heavy duty handoperatedoverheadTravelling(HOT)crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. with clear lift upto 6 M including gear type chain pulley block and geared Travelling trolley complete with all accessories including girder. 234 MOTOR CONTROL CENTER (MCC) PANEL :-Singlefront,Indoor&floormounted,cubicaltypePanelfactory fabricated(2mmthickforsructure,1.6mmthickfordoor,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coated dust andvermin proof IP-54 /IS:2147, consideredEarth Bus-Bar-Copper Strip compitable to SCADA operation with RS485 Port consisting of INCOMMING SECTION400 A, 50KA, TPN, MCCB microprocessor baseed(O/C,S/C) release - 1No,SpreaderLinks&ExtendedROHfor-1No,3PhaseDigital Multifunction Meter- 1 No, Digital Voltmeter 0-500V- 3 No, Digital Amperemeter0-1000A -3Nos,CTFormeterResinCastCL- 1000A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No.OUTGOING SECTION200 A, 50KA, TPN, MCCBmicroprocessor based (O/C,S/C) RELEASE - 3 No, Spreader Links & Extended ROH for MCCB - 3 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 235 SupplyofAirCooledDigitalsoftstartersuitablefortheLTmotor offered for operation in AC three Phase 50Hz (+/- 5%), 415V(+/-10%) including line contactors suitable for next standard higher KW rating, Over & Under load protection, short circuit & single phasing protection with frequency meter, Ampere meter, Voltmeter, indicating lamp6Nos,LEDON/OFFtypeandStart/Stoppushbuttonand InstrumentFuses,suitabletoSCADAoperationwithRS485Port rating capacity 75 HP / 55 KW 236 Supply & laying of 1.1KV grade XLPE insulated armured multi strand copperconductorcableof3Cx50sq.mm fromcontrolPanelto respective Motors with lugs etc. (copper conductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I/ IS :7098 P-I) 237 Supply & Fixing of Powder coated GI Cable Tray 150mmx50mmx1.6mm 238 Earthing with GI earth plate 1200 mm X 1200 mm X 12 mm thick includingaccessories, and providing masonryenclosurewith cover plate having locking arrangement and watering pipe of 3 metre long etc.withcharcoal/cokeandsaltasrequiredaccordingtolatest IS:3043 :2018 239 Supplying and laying 50 mm X 12 mm G.I.strip at 0.50 metre below groundasstripearthelectrode,includingconnection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done byoverlappingandwith2setsofbrassnutbolt&springwasher spaced at 50mm) 240 Supply of ABC Dry Powder type Fire Extinguisher 4.5 kg conforming to IS: 15683:2006 241 Supply of CE/UL Certified Surge protector for control panel 242 Supply of Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of 400 Amp 243 S& F of all in one solar LED street light fixture with Integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro PhosphatebatterywithBISapprovedmake.luminaireshouldbe secondary optic lenses for better distribution with delivered efficacy of >100 Lumen per watt. Luminaire can be supplied with Hybrid switch along with indicator to understand the source of power( either from solar or AC supply).shall have certificate tested fromMNRE approved Lab.Guaranteefortotalsystemistwoyears.Note:Alltheabove should be integrated and should be 1 system. make: Bajaj/ Philips / Crompton. Compact SolarLED Street Light- 60W/12V/27Ah with GI pole 244 Internal & External electrification of Pump house :- 245 Twin tube light covered LED 20 Watt 246 450 mm dia exhaust fan 247 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material 60 Watt Flood light 248 CompletewiringofPumphouse with1.5 Sqmm& 2.5Sqmm multistarndcopperconductorwire1.1KVwithrequired5A&15A switches, ceiling rose 249 RubbermatsforelectricalpurposeasperIS:5425-1969, plain/chequered (1mX2m) - 19mm thickness 250 INSTRUMENTATIONWORKS AT INTAKE WELL 251 Supply of CE/UL Full Bore Electromagnetic Flow Meter of approved makeoffollowing dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Process temp:-50degC, Flow/MeterTube:SS304, Electrode:SS AISI 316L /Hastelloy C276/Tantalum,LiningMaterial:Hard Rubber/ Neoprene/Poly-urethane(PU) , Flange : SS /CS, Flange Standard&Rating:ANSI150,Coilhousing:SSAISI304/Carbon Steel/DieCastAluminium, withanticorrosivepaint &provide completelysealed(leakproof)constructionasperrequirement ‘of IEC60529,Accuracy:+0.5%M.V.-velocity0.3to10m/s, Transmitter/signaconvertor Enclosure :DieCast Aluminium, Power Supply : 80-240V AC - 5OHz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart,Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable(size - 350 mm dia at common header) 252 SupplyofCE/ULCertifiedpressuretransmitterCEmarkdwith following technical parametersand Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 253 Supply of CE/UL cirtified ofRadar level transmitter CE marked with following technical parametersand Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 254 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with intelligent GSM Based modem unit with CPU and PowerSupplywithanalogandDigitalParameterandfeaturesas specified tostoreandtransmitdataonGSMbackbone,RTU/PLC designedwithlogictotansferdataatmultiplestationsandalso compatible for satellite communication. 255 Control panel with IP 54 Protection, Industrial grade forall equipment and 24V and power supply 256 GSM/GPRS based wirelesscommunicationwith 4G modem for RTU/PLC Capable to transfer and gather data from remotesites to control stations all accessories included with signal enhancer, antenna made for pumping plantwith SIM andrecharge 257 CE & UL Certified 10 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters 258 CE/UL Certified Intelligent energy meters 259 Complete cabling for instrumentation works with power cabeling to panel of automation 260 SecuritySurvelliance IP 4.0 MP HD Bullet Guard + AudioCamerawith NVR 2 SATA, 2 TB HDD, HDMI cable, CAT 6 cable etc allrequiredaccessoriesfor pump house, substation and campus. 261 Installation, testing and comissioning of pumping plant & associated allequipmentsasperapproveddrawingshallbedonebybidder includingchequerredplateandpaintingofpumpingplant&main piping-valves. 262 Testing of Pumping Plant & Control Panel & valves etc at Manufacturer Works 263 CLEAR WATER PUMPING PLANT AT MCWR 264 SupplyofVerticaltypeselfwaterlubricatedstatically,dynamically, hydraulically balanced turbine pump capable of discharging at 1450 rpm thefollowingdutyconditionasgivenbelowduetoallcauseswith surfacedischargeheadconfirmingtoIS:1710andasamendedason datewithaccessoriesasperIS5120/1977(Reconfirmed2011)andas amended thereafter to suit the site condition.The Pump Bowl assembly shall be FG: 260 with 2% NiCi with CF8M impeller running at 1450 rpm., head shaft, SS-410 line shaft , Rubber line shaft bearing , C.I. Bearing retainer,Suctionbellmouth,strainer,oiltubeand05mtr/suitable lengthcolumnassembly,withverticalSolidshaft Squirrelcage induction motor copper wounded and die cast copper rotor (IS:126152011/IEC 60034-1) suitable for the above pump continuous rated TEFC IP-55 with Class F insulation, anti rotation locking arrengement for operation in AC, three Phase/50 HZ (±5%), 415V (±10%), running with a speed of pump.CAPACITY:- 5300 LPM / 50 Mtr. HEAD / 100 HP MOTOR (2w+2s) 265 MAIN PIPING AND VALVES :- 266 SupplyofDIDFSingleDoor/MultiDoorNonreturn/refluxvalve conforming to IS:5312/2003(part I & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing 250 mm 267 SupplyofDIDFsluicevalvewith Electricallyintegratedactuater (Totally enclosed, weather-proof and dust proof construction with IP- 67(IP-68 for field installation),protectionclasssuitableforinstallationinanypositionwithout lubrication, leakage or other operational difficulty with special grease filled gear box and suitable for manual operation for emergency which willautomaticallydis-engageonrestorationofpowertomotorand with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated with positioning card suitable to SCADAoperation sluice valve having Body : DI GGG 40 / IS 1865 Gr. 400/15, Wedge : DI GGG 40 /IS 1865 Gr. 400/15, Dome : DI GGG 40 / IS 1865 Gr. 400/15, Wedge Nut: Brass / Al. Bronze , Spindle : SS AISI 410 , Seat Rings : LTB IS : 318 Gr. LTB 2,Spindle Nut : LTB IS : 318 Gr. LTB 2 . Valves aresuitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0)of following sizes :- 268 250 mm dia size at Pump delivery 269 350 mm dia size at common header 270 Supply of DIDFmanually operated sluice valve having body Body : DI GGG 40 / IS 1865 Gr. 400/15, Wedge : DI GGG 40 /IS 1865 Gr. 400/15, Dome : DI GGG 40 / IS 1865 Gr. 400/15, Wedge Nut: Brass / Al. Bronze , Spindle : SS AISI 410 , Seat Rings : LTB IS : 318 Gr. LTB 2,Spindle Nut : LTB IS : 318 Gr. LTB 2 . Valves generally conform to IS:5312.Flanges tobedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0 Rating) Sluice Valve of 350 mm dia size at By-pass 271 Supply and fabrication of main piping of following sizes350 x 250 x 350 mm MS D/F Tee (10 mm thickness) -4 No250 mm MS D/F Pipe 0.50 mt. (10 mm thickness) - 4 No 250 mm MS D/F Pipe 1.00 mt.(10 mm thickness) - 4 No 350 mm MS D/F Pipe 1.00 mt.(10 mm thickness) - 4 No 350 mm MS D/F Pipe 2.00 mt. (10 mm thickness) -2 No 350 mm MS D/F (10 mm thickness) Bend 90o - 2 No 350 mm Blind Flange - 1 NoNecessary G.I. Nut Bolt’s & Rubber Packing - 1 Lot 272 SupplyofD.I./D.F.DismantlingJointsisavariablelengthDouble Flanged Short Piece constituted by a flange / Spigot Tailpiece inserted intotheotherTailpiecewhichallowsthedistancebetweenthetwo flangestobevariedwithincertainlimitsthusprovidingavariable distance piece between two fixed flange end devices like Pumps and Valves.TheDismantlingJointtobesuppliedcompletewithSealing RubberGasketsofEPDMquality(IS:5382/1985Type-4),CastIron Follower Glands andMildSteel (ZincCoated)NutBoltsof Following size 273 Dismantling joint 200 mm dia size at pump delivery 274 Dismantling joint 350 mm dia size at common header 275 3 Ton capacity hand operated over head Travelling (HOT) crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. with clear lift upto 6 M including gear type chain pulley block and geared Travelling trolley complete with all accessories including girder. 276 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated(2mmthickforsructure,1.6mmthickfordoor,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coated dustandverminproofIP-54/IS:2147,consideredEarthBus-Bar-Copper Strip compitable to SCADA operation with RS485 Port consisting of INCOMMING SECTION400 A, 50KA, TPN, MCCBmicroprocessor baseed(O/C,S/C) release - 1 No,SpreaderLinks&ExtendedROHfor-1No,3PhaseDigital MultifunctionMeter-1No,DigitalVoltmeter0-500V-1No,Digital Amperemeter0-400A -3Nos,CTFormeterResinCastCL- 200A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, ControlMCBSP6A,10KA-3Nos,CTShortingTerminal-4Nos, Neutral Link - 1 No.OUTGOING SECTION250 A, 50KA, TPN, MCCBmicroprocessor based (O/C,S/C) RELEASE - 4 No, Spreader Links & Extended ROH for MCCB - 4 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 277 SupplyofAirCooledDigitalsoftstartersuitablefortheLTmotor offeredforoperationinACthreePhase50Hz(+/-5%), 415V(+/-10%) including line contactors suitable for next standard higher KW rating, Over & Under load protection, short circuit & single phasing protection with frequency meter, Ammeter, Voltmeter, indicating lamp 6Nos, LED ON/OFFtypeandStart/StoppushbuttonandInstrumentFuses, suitable to SCADA operation with RS485 Port rating capacity 100 HP / 75 KW 278 Supply & laying of 1.1KV grade XLPE insulatedarmured multi strand copperconductorcableof3Cx95sq.mm fromcontrolPanelto respective Motors with lugs etc. (copper conductor should be electrlytic grade coppe, purity >99.97 % ISI marked as per IS:1554 P-I / IS:7098 P- I) 279 Supply & Fixing of Powder coated GI Cable Tray 150mmx50mmx1.6mm 280 EarthingwithGIearthplate1200mmX1200mmX12mmthick includingaccessories,andprovidingmasonryenclosurewithcover plate having locking arrangement and watering pipe of 3 metre long etc. with charcoal/ coke and salt as required according to latest IS:3043:2018 281 Supplyingandlaying50mmX12mmG.I.stripat0.50metrebelow ground as strip earth electrode, including connection/ terminating with nut,bolt,spring,washeretc.asrequired.(Jointingshallbedone by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 282 Supply of ABC Dry Powder type Fire Extinguisher 4.5 kg conforming to IS: 15683:2006 283 Internal & External electrification of Pump house :- 284 Twin tube light covered LED 20 Watt 285 450 mm dia exhaust fan 286 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material 60 Watt Flood light 287 Complete wiring of Pump house with 1.5 Sqmm & 2.5 Sqmm multistarnd copper conductor wire 1.1 KV with required 5A & 15A switches, ceiling rose 288 Supply of CE/UL Certified Surge protector for control panel 289 RubbermatsforelectricalpurposeasperIS:5425-1969, plain/chequered (1mX2m) - 19mm thickness 290 INSTRUMENTATION WORKS 291 SupplyofCE/ULFullBoreElectromagneticFlowMeterofapproved makeoffollowingdiaandspecificationscomplete: Media: Water ( Chlorinated) , Pressure : up to 1.0MPa, Process temp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI 316L /Hastelloy C276/Tantalum,LiningMaterial:HardRubber/ Neoprene/Poly-urethane(PU) , Flange : SS /CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, withanticorrosivepaint&providecompletely sealed (leakproof) construction as per requirement ‘of IEC 60529, Accuracy:+0.5%M.V.-velocity0.3to10m/s,Transmitter/signa convertorEnclosure: Die CastAluminium,Power Supply : 80-240V AC - 5OHz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart,Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category-IP68forsensor(flowtube)andIP67fortransmitter/ convertor, including Surge Arrester, cable, of of following sizes :- 292 350 mm dia. Size at common header of pumping plant 293 350 mm dia. Size at OHT outlet of zone-1 294 350 mm dia. Size at OHT outlet of zone-2 295 450 mm dia. Size at OHT outlet of zone-3 296 200 mm dia. Size at OHT outlet of zone-4 297 Supply of Electrically Motor operated actuator with positioning card and bracketforsluicevalvesuitableforSCADAoperationwithlimit switches, auto de clutch for manual operation in emergency etcas per relevant IS suitable forOHT outlet of following sizes 298 350 mm dia. Size at OHT outlet of zone-1 299 350 mm dia. Size at OHT outlet of zone-2 300 450 mm dia. Size at OHT outlet of zone-3 301 200 mm dia. Size at OHT outlet of zone-4 302 SupplyofD.I./D.F.DismantlingJointsisavariablelengthDouble Flanged Short Piece constituted by a flange / Spigot Tailpiece inserted intotheotherTailpiecewhichallowsthedistancebetweenthetwo flangestobevariedwithincertainlimitsthusprovidingavariable distance piece between two fixed flange end devices like Pumps and Valves.TheDismantlingJointtobesuppliedcompletewithSealing RubberGasketsofEPDMquality(IS:5382/1985Type-4),CastIron Follower Glands andMildSteel (ZincCoated)NutBoltsof Following size 303 Dismantling joint 350 mm dia size at OHT outlet of zone-1 304 Dismantling joint 350 mm dia size OHT outlet of zone-2 305 Dismantling joint 450 mm dia size at OHT outlet of zone-3 306 Dismantling joint 200 mm dia size at OHT outlet of zone-4 307 Supply of CE/UL Certified pressure transmitter CE markd with following technical parametersand Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 308 Supply of CE/UL cirtified ofRadarlevel transmitter CE marked with following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 309 CE & UL Certified PLC/ RTU with redundent CPU & power supply in IP 54 enclosure suitable to communicate with GSMBasedmodemwith redundentCPU andPower Supply with analog and Digital Parameter and features as specified for each ZPSto store and transmit data on GSM backbone, RTU/PLC designed with logic to tansferdataatmultiplestationsandalsocompatibleforsatellite communication for CWR. 310 Control panel with IP 54 Protection , Industrial grade for all equipment and 24V and power supply 311 GSM/GPRS based wireless communication with 4G modem for RTU/PLCCapabletotransferandgatherdatafromremotesitesto control stations all accessories included with signal enhancer, antenna made for pumping plantwith SIM and recharge for CWR & OHT 312 CE & UL Certified 10 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 313 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with intelligentGSMBasedmodemunit with CPU andPower Supply with analog and Digital Parameter and features as specifiedto store and transmit data on GSM backbone, RTU/PLC designed with logic to tansferdataatmultiplestationsandalsocompatibleforsatellite communication for OHT 314 Control panel with IP 54 Protection , Industrial grade for all equipment and 24V and power supply 315 GSM/GPRS based wireless communication with 4G modem for RTU/PLCCapabletotransferandgatherdatafromremotesitesto control stations all accessories included with signal enhancer, antenna made for pumping plantwith SIM and recharge for OHT 316 CE/UL Certified Intelligent energy meters 317 Complete cabling of instrumentation equipments with power supply of panels for CWR & OHT 318 SecuritySurvelliance IP 4.0 MP HD Bullet Guard + AudioCamerawith NVR 2 SATA, 2 TB HDD, HDMI cable, CAT 6 cable etc allrequiredaccessoriesfor pump house, substation and campus. 319 Installation, testing and comissioning of pumping plant & associated all equipments as per approved drawing shall be done by bidder including chequerred plate and painting of pumping plant & main piping-valves. 320 Testing of Pumping Plant & Control Panel & valves etc at Manufacturer Works 321 11/0.44KV SUB STATION AT INTAKE WELL 322 Supply of star rated Copper wound distribution Transformer ( All the distributiontransformermustbestarratedaspernotificationof (BEE)ministryofpower,GoverenmentofIndia)offollowingrating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11, ONAN Cooled & as per BEE star level- 2 & BIS approved as per IS 2026-1977 & losses as defined as per IS 1180 part (I) 2014 including standard accessories like conservator, silica gel breather,Bucholz relay, radiator, fins, HT cablebox99.6 % & as per IS:1554 P-I / IS :7098 P - (I)from UPPCLmetering panel to H.T. Switch gear panel and panel to transformers 120 Sq.mm. size 326 Supply of H.T. Cable end termination heat shrinkable type indoor joint kit 120 sq.mm. 327 SupplyofH.T.Cableendterminationheatshrinkabletypeoutdoor joint kit 120 sq.mm. 328 Supply & laying of L.T. XLPE insulatedarmoured aluminium conductor cableof1.1KVgradeMaterial:-H4-Gradealuminium conductorofpurity>99.6%&asperIS:1554P-I/IS:7098P- (I),conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999.From transformer to Main LT panel and main LT panel to MCC panel of 3.5C x 300 Sq.mm. 329 Earthing with copper earth plate 1200 mm X 1200 mm X 12 mm thick includingaccessories,andprovidingmasonryenclosurewith cover plate having locking arrangement and watering pipe of 3 metre long etc.withcharcoal/cokeandsaltasrequiredaccordingtolatest IS:3043 330 Supplying and laying 50 mm X 12 mm G.I.strip at 0.50 metre below groundasstripearthelectrode,includingconnection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done byoverlappingandwith2setsofbrassnutbolt&springwasher spaced at 50mm) 331 Supply and Fixing of fire extinguisher of 5 Kg. capacity conforming to IS: 15683:2006 332 RubbermatsforelectricalpurposeasperIS:5425-1969, plain/chequered (1mX2m) - 19mm thickness 333 NOC from electrical safety Dept. Govt. of UP 334 Fancing of substation in 2mtr height made from MS iron Jali & MS flat, angleironandgroutinginpropermannerasperrelevantIScode including supply and laying of stone grit. 335 Internal & External electrification of HT & LT panel room :- 336 Twin tube light covered LED 20 Watt 337 450 mm dia exhaust fan 338 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material 60 Watt Flood light 339 CompletewiringofHTandLTroom with1.5Sqmm&2.5Sqmm multistarndcopperconductorwire1.1KVwithrequired5A&15A switches, ceiling rose 340 S& F of all in one solar LED street light fixture with Integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro PhosphatebatterywithBISapprovedmake.luminaireshouldbe secondary optic lenses for better distribution with delivered efficacy of >100 Lumen per watt. Luminaire can be supplied with Hybrid switch along with indicator to understand the source of power( either from solar or AC supply).shall have certificate tested fromMNRE approved Lab.Guaranteefortotalsystemistwoyears.Note:Alltheabove should be integrated and should be 1 system. make: Bajaj/ Philips / Crompton. CompactSolarLEDStreetLight- 60W/12V/27Ah with GI pole 341 Supplyofmicroprocessorbasedthreephasesensingpowerfactor correction relay panel , IEC / EN 61000-6- (2&4) having 3 CT sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor,lag/leadcapacitorswitchingstatus,alarmoutputforunder current, over current, insufficient compensation, communication interface with RS 485, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR rating capacity of 100 KVAR 342 SITC of 01 No. DG Set of Capacity 180 KVA 415+ volt with AMF control Panel cabling,copper earthing etc. complete in all respect.( As per Lataest CPCB- IV Emission Norm ) 343 Installation, testing and commissioning of 11 KV /.44 KV substations includingH.T.panelandL.T.panelincludingchequeredplates,all labour T&P complete in all respect. 344 Testing of DG., Transformer, HT and LT Panel etc at Manufacturer Works 345 11/0.44KV SUB STATION AT MCWR 346 SupplyofstarratedCopperwounddistributionTransformer(Allthe distribution transformer must be star rated as per notification of (BEE) ministry of power, Goverenment of India) of following rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11, ONAN Cooled & as per BEE star level- 2 & BIS approved as per IS 2026-1977 & losses as defined as per IS 1180 part (I) 2014 including standard accessories like conservator, silica gel breather,Bucholz relay, radiator, fins, HT cable box & LT cable boxes, Off -LTC (+7.5% to - 15% @ 2.5%) temperature rise of 40 degree C inoil/45degreeCinwinding,ISImarkeddrainvalve,Dialtype Temperature gauge, OTI & WTI, marshalling box, first filling of transformer oil as per IS :335-1953, Epoxy based paint.Rating capacity - 400 KVA (1w+1s) 347 Supply of SCADA Compatible with RS 485 port 11KV,800 A, 25kA / 1 Sec, VCBIndoortypepanelHTboard,freestandingmotoroperated& withdrawaltypefabricatedfrom2mmthickCRCAsheetsteel,With copper busbar, Ammeter, Voltmeter, PF Meter, KWH Meter, MDI Meter, Selector Switches as required, CRT-CT of required ratio (15VA ; Cl-1.0 / 0.5 ) PT (11 KV /110V/√3) , Fuses , IP42 Protection, 10 / 12-window Annunciation Panel, AC/ DC Control voltage 24/48/ 110/230V , LED Indication lamps , S/C, O/C & E/F Protection (IDMT) Relays Alarm & trip contacts for Transformer protection(High oil temperature, Buchholz protection, high winding temperature, power pack 2 x 12 V,etc complete in all respect ready to use(RTU),OEM Must have BIS certificate incuding 1no incoming & 2 no outgoing VCB 348 Singlefront,Indoor&floormounted,cubicaltypeLTPanelfactory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-Copper Strip compitable to SCADA operation with RS485 Port consisting of INCOMMING SECTION800 A, 50KA, TPN, ACB, EDOmicroprocessor baseed(O/C,S/C) release-2No SpreaderLinks&ExtendedROH -2No,3PhaseDigital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A -1No, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No.OUTGOING SECTION400 A,50KA,TPN, MCCB microprocessor based (O/C,S/C) RELEASE-2 No, 200 A,50KA,TPN, MCCB microprocessor based (O/C,S/C) RELEASE-2No, spreader Links & Extended ROH for MCCB - 4 Nos., 63A TPN MCCB 32KA- 2 Nos. Terminal 63A 349 Supplyandlayingof11/12KVgradeXLPEinsulatedH.T. armouerd cableasper IS:7098 / II/85,H4- Grade aluminium conductor of purity >99.6 % & as perIS:1554P-I/IS:7098P-(I)fromUPPCL meteringpaneltoH.T. Switch gear panel and panel to transformers 120 Sq.mm. size 350 Supply of H.T. Cable end termination heat shrinkable type indoor joint kit 120 sq.mm. 351 Supply of H.T. Cable end termination heat shrinkable type outdoor joint kit 120 sq.mm. 352 Supply & laying of L.T. XLPE insulatedarmoured aluminiumconductor cableof1.1KVgradeMaterial:-H4-Gradealuminiumconductorof purity >99.6 % & as per IS:1554 P-I / IS :7098 P-(I),conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999.From transformer to Main LT panel of 3.5C x 300 Sq.mm. (in 2 run for each transformer) 353 Supply & laying of L.T.XLPE insulatedarmoured aluminiumconductor cableof1.1KVgradeMaterial:-H4-Gradealuminiumconductorof purity >99.6 % & as per IS:1554 P-I / IS :7098 P-(I),conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999.From Main LT panel to MCC Panel at WTP of 3.5C x 150 Sq.mm. 354 Supply & laying of L.T.XLPE insulatedarmoured aluminiumconductor cableof1.1KVgradeMaterial:-H4-Gradealuminiumconductorof purity >99.6 % & as per IS:1554 P-I / IS :7098 P-(I),conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999.From Main LT panel to MCC Panel at MCWR of 3.5C x 400 Sq.mm. 355 EarthingwithGIearthplate1200mmX1200mmX12mmthick includingaccessories,andprovidingmasonryenclosurewithcover plate having locking arrangement and watering pipe of 3 metre long etc. with charcoal/ coke and salt as required according to latest IS:3043:2018 356 Supplyingandlaying50mmX12mmG.I. stripat0.50metrebelow ground as strip earth electrode, including connection/ terminating with nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 357 Supply and Fixing of fire extinguisher of 5 Kg. capacity conforming to IS: 15683:2006 358 Rubber mats for electrical purpose as per IS:5425-1969, plain/chequered (1mX2m) - 19mm thickness 359 NOC from electrical safety Dept. Govt. of UP 360 Fancing of substation in 2.5mtr height made from MS iron Jali & MS flat, angleironandgroutinginpropermannerasperrelevantIScode including supply and laying of stone grit. 361 Internal & External electrification of Pump house :- 362 Twin tube light covered LED 20 Watt 363 450 mm dia exhaust fan 364 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material 60 Watt Flood light 365 CompletewiringofHTandLTroom with1.5Sqmm&2.5Sqmm multistarndcopperconductorwire1.1KVwithrequired5A&15A switches, ceiling rose 366 Supply of Auto Phase reversal unit / Automatic switch with inbuilt the delay&enclosure(Confirms to IEC:60947-1&IEC: 60947-6-1)of 630 Amp 367 Supplyofmicroprocessorbasedthreephasesensing auto powerfactor correction relay panel , IEC / EN 61000-6- (2&4) having 3 CT sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current,insufficientcompensation,communicationinterfacewithRS 485, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR rating capacity of 200 KVAR 368 SITC of 01 No. DG Set of Capacity 380 KVA 415+ volt with AMF control Panel cabling, earthing etc. complete in all respect. ( As per Lataest CPCB- IV Emission Norm ) 369 Installation,testingandcommissioningof11KV/.44KVsubstations including H.T. panel and L.T. panel including chequered plates, all labour T&P complete in all respect. 370 Testing of D.G, Transformer, HT and LT Panel etc at Manufacturer Works 371 Automation of DMA 372 Flow Control Valve 373 Supplying, installing ,commissioning & testing of Flow Control Valvefor inlet with flow measuring, flow controlling, pressure monitoringandweb based with cable PLC etc Complete.Pattern Hydraulically operated self actuated flow & level control valve (either with float or altitude pilot) with downstream orifice having Ductile Iron valve body, Y - Pattern, Double Chamber, unitized actuator, Fusion bonded epoxy coating, copper control tubing with Latching Solenoid & Pilot operated as per design, additional speed control feature, drip tight sealing, In-line serviceable, internals stainless steel & protected diaphragm suitable for drinking water. 374 For Zone -1 375 300 mm ( for OHT Inlet) 376 250 mm ( DMA-1) 377 250 mm ( DMA-2) 378 250 mm ( DMA-3) 379 For Zone -2 380 300 mm ( for OHT Inlet) 381 200 mm ( DMA-1) 382 250 mm ( DMA-2) 383 250 mm ( DMA-3) 384 For Zone -3 385 450 mm ( for OHT Inlet) 386 300 mm ( DMA-1) 387 400 mm ( DMA-2) 388 300 mm ( DMA-3) 389 For Zone -4 390 100 mm ( for OHT Inlet) 391 200 mm ( DMA-1) 392 IsolationValve 393 Supplying, installing ,commissioning & testing of DI Isolationvalve with electric acuator for isolation of DMA flow controling with cable PLC etc Complete. 394 For Zone -1 395 250 mm ( DMA-1) 396 250 mm ( DMA-2) 397 250 mm ( DMA-3) 398 For Zone -2 399 200 mm ( DMA-1) 400 250 mm ( DMA-2) 401 250 mm ( DMA-3) 402 For Zone -3 403 300 mm ( DMA-1) 404 400 mm ( DMA-2) 405 300 mm ( DMA-3) 406 For Zone -4 407 200 mm ( DMA-1) 408 Pressure Transmitter 409 Supplying, installing ,commissioning & testing of CE/UL Certified Pressure Transmitterfor pressure monitoring web based with cable PLC etc Complete for all 10 DMA,s of All 4 Zones 410 Electromagnetic Flow Meter 411 Supplying, installing ,commissioning & testing of CE/UL Certified Electromagnetic Flow Meterfor Flow monitoringweb based with cable PLC etc Complete 412 For Zone -1 413 250 mm ( DMA-1) 414 250 mm ( DMA-2) 415 250 mm ( DMA-3) 416 For Zone -2 417 200 mm ( DMA-1) 418 250 mm ( DMA-2) 419 250 mm ( DMA-3) 420 For Zone -3 421 300 mm ( DMA-1) 422 400 mm ( DMA-2) 423 300 mm ( DMA-3) 424 For Zone -4 425 200 mm ( DMA-1) 426 Residual Chlorine Analyser 427 SITC of Chlorine Analyser with MODBUS RTU having Following specification - (a) FRC senser range 0-5 ppm (b) Analyser with RS 485 O/P suitable to OHT distribution line and compatible with SCADA system toofor all 10 DMA,s of All 4 Zones 428 Chlorine Dozer For DMA 429 SITC of SCADA Compatible Chlorination Systemfor all 10 DMA,s of All 4 Zones 430 SCADA For DMA 431 CE & UL Certified PLC/RTUin IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Powersupply with annlog & digital parameter & featuers as specified, for each DMA to store and transmit dataon GSM backbone, RTU/PLC desgined with logic to transfer data at multiple stations with control panel as specified intender technical specifications. 432 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories include with signal enhancer antenna made for pumping plant internetcharges as specified in tender technical specification . 433 Intelligent energy meters 434 Control Panel with IP 54 Protection, Industrial Grade for all equipment. (Separate for control (24 V) and power equipments.) upto 3 pumps. 435 CE/ UL Certified 10 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 436 CE/UL Certified 1 KVA UPS with Batteries for data backup. 437 CE/UL Certified 10 KVA UPS with Batteries for valve operation of each OHT . 438 Cabling 439 Complete Cabling for Intake well including all power & control cable of all equipments at ZPS and OHT. 440 SecuritySurvelliance IP 4.0 MP HD Bullet Guard + AudioCamerawith NVR 2 SATA, 2 TB HDD, HDMI cable, CAT 6 cable etc allrequiredaccessories . 441 MASTER CONTROL STATION (MCS) AT WTP 442 CE/UL & BIS Certified industrial grade LED MONITOR with latestconfiguration as per specification 65 443 Video call media player of same OEM 444 Core i7 10th gen Desktop/ laptop with 32 GB RAM and 256 GB SSD + 1TB HDD 445 CE/UL Certified 5 KVA UPS with Batteries required for mentioned work wih 01 hrs backup 446 Full Development version of TAGS SCADA software with costomization of software for MCS for unlimited digital and analog Input / output features as per requirements 447 CE/ULcertifiedmastercontrolroomPLCwithredundantCPU&power supply at MCS in IP-54 enclosure as per site requirement and specification required to complete in all respect 448 CE/UL certified Field gateway agent for transfering data forMCS/control room 449 GSM/GPRSbasedwireless/Broadband/equivelentcommunicationsystem for PLC Capable to transfer and receive data & gather data from remote sitestocontrolstationsallaccessoriesincludedwithsignalenhancer,antenna along with running expences 450 CE/UL certified Firewall for network protection 451 CE/UL Certified Surge protector for Ethernet communication protection 452 CE/UL Certified industrial grade Ethernet switch 453 Mobile app facility system architecture (industries internet based & viewed through mobile apps for increasedblocal & remote visibility) 454 Canon/HP or equivalent Laser Printer 1018 or equivalent. 455 Hp or equivalent multifunctioning Laser Printer with scanner 456 BEE : 5 Star rating 1.5 Ton capacity air conditioner with voltage satbilizer 457 Office furniture ( office table - 2 No, revolving chair- 2No, Office chair-3 No, Godrej almirah - 1No) 458 SecuritySurvelliance IP 4.0 MP HD Bullet Guard + AudioCamerawith NVR 2 SATA, 2 TB HDD, HDMI cable, CAT 6 cable etc allrequiredaccessories. 459 Installation, Commissioning and testing of all above equipments for MCS with all power cables 460 TRAIL & RUN FOR 3 MONTHS WITHOUT ELECTRICITY CHARGES
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
Uttar Pradesh View Result →
19.
Drinking Water Supply and Sanitation #9470718 Technical Bid
Tender For Bilari Nagar Palika Parishad Reorganization Water Supply Scheme Under Amrut 2.0 Programme - Supply of all the materials, labour T&P and construction of a R.C.C. Over head tank above ground level with main components, based on IS-3370 or liquid storage concrete in over head tank and foundation concrete as per specification in I.S. 2911.All Components of OHT will be casted in M-30 concrete with cement, coarse sand and approved stone grit as per I.S. 11682 and I.S. 456.The steel for RCC shall be epoxy coated TMT bars- Fe 500/415 as per IS code IS 2062:2011.Minimum depth of foundation below original ground level will be 2.0 M.Seismic effects and wind load should be taken into consideration as I.S. 1893for earthquake resistance and I.S. 875 part-III for wind load on structure. The assumed bearing capacity of soil has been taken as 8 M.T. sqm.1m wide RCC stair case from ground lavel to balcony.M.S. ladder made of 50 X 50 X 6 mm angle section and 20 mm plain M.S. bars (specification of M.S. should be as per IS 800-2007) with hand rails of 20 mm medium class G.I. pipes on both sides in three rows from balcony to top dome resting on an RCC platform (75 X 75 cm and 10 cm thick) projecting from top ring beam and one aluminium ladder inside the tank body ( from manhole in top dome to bottom dome).1 m wide R.C.C. balcony around the tank at the junction point of vertical wall and conical wall.Proper R.C.C. railing and 20 mm dia medium class G.I. pipe (in 3 rows) on both sides of stair case, arround the balcony at each landing from landing with top ring beam upto manhole on the top dome and at the periphery. The G.I. pipes will be supported on R.C.C. postsof 100 mm dia or on the posts made of 50 X 50 X 6 mm M.S. angle section, spaced at intervals not more than 1.5 m.Proper ventilator at top dome in circular shape of 1.2 m dia along with an R.C.C. cover of minimum 1.50 m dia and 7.5 cm thickness, pillar of ventilator should be minimum 50 cm dia. The space between top dome and R.C.C. cover should be covered with mosquito net of standard quality along with expanded metaled jali.Electro Magnetic Flow MeterLightening conductor as per I.S.S. 2309 of its latest amendments of latest electricity rules. It should consist proper elevation rod with 5 or more fork points proper down conductors of prescribed metal of proper size prescribed by ISS 2309-1969 and ISS 3013-1966.D.I. manhole of min 60 X 60 cm size made of M.S. channel section with adequate cover made of M.S. sheet of minimum 3mm thickness hinged with manhole with locking arrangment. This manhole should be fixed at top dome at proper place. 2 Supply, fixing, jointing of following size of D.I. D/F Pipes with D.I. D/F specials conforming to IS 8329/2000as vertical pipes for inlet, outlet, over flow and washout as per latest / relevent I.S. specifications with all jointing materials for proper completion of work including other appurtenant works and excavation in all types of soil. Zone-3:- Inlet 200 mm 200 mm Outlet 300 mm, Over flow 200mm & Wash out 100 mm. Zone-4:- Inlet 150 mm & 150 mm Outlet 300 mm, Over flow 150mm & Wash out 100 mm.Supply and Fixing of following sizes D.I. D/F sluice valves with hand wheels as per I.S.S. 700/1969 or its latest pressure 10 kg/sqcm including cartage from its store to the site of work, lowering them into trenches, fixing in position & testing etc. complete.Zone-3:- Inlet 200 mm & 200 mm Outlet 300 mm & Wash out 100 mmZone-4:- Inlet 150 mm & 150 mm Outlet 300 mm & Wash out 100 mmConstruction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit under each duck foot bend to support the vertical pipes. These bed blocks should supported on the raft not on the soil.Construction of surface box type Sluice valve chamber for above sluice valve (3 No.) as per departmental type design and drawing including supply and fixing of 150 mm x 150 mm size C.I. surface box including locking arrangement.Construction of washout/ overflow chamber as per departmental type design and drawing.Construction of P. C. C. Floor & Drain and all other necessary work as per departmental type drawing and design.Painting of all concrete surface and steel pipe worrks with three coats of approved cement paint and anticorrosive paints.Testing & Commission etc. all complete work.Testing and submission of test report of bearing capacity of soil from a recognized Govt. institute.Submission of 5 sets of detailed design and drawing of O.H.T and mix design of M30 concrete done and vetted by Head of the department from any IITs/Central University as per direction of Engineer-in -charge. The design of tank & foundation will be based upon the soil investigation report which shall be done from any Govt. institute. 3 1700 KL / 18.0 M Staging (ZONE-03) 4 500 KL / 18.0 M Staging (ZONE-04) 5 RISING MAINSupply of the following sizes of D.I. pipes Class K-9 conforming to latest I.S. 8329/2000 andD.I. S/S or flanged Specials conforming to I.S. 8329/2000 Suitable for above C.I.S/S pipe F.O.R destinationfrom tubewell to OHT including bypass including all Taxes and insurance. complete in all respect. 6 150 mm dia K-9 7 200mm dia K-9 8 Excavation for DIpipe line trenches in ordinary soil,(lime, clay or sand including lift up to 1.5m and lead up To 50m and refilling, watering, ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the centre of the foundation trenches. 9 Carting from the store (up to 8 Km.) The following sizes of D.I. double K-9 pipeand specials to the site of work lowering them into trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complete but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. 10 150 mm dia K-9 11 200mm dia K-9 12 Supply of all materials, labour, T & P etc. required and construct thrust blocks at the bends and below the Valves. 13 DISTRIBUTION SYSTEMSupply of the following sizes of DI K-7 & HDPE pipes(PN-6, PE-100) confirming to latest relevant I.S.Codes with DI/HDPE Specials conforming to I.S.- 8329/2000 and I.S.- 4984/2016 respectively etc complete in all respect F.O.R. destination including all taxes and insurance. 14 450 mm dia DI K-7 15 400 mm dia DI K-7 16 350 mm dia DI K-7 17 300 mm dia DI K-7 18 250 mm dia DI K-7 19 200 mm dia DI K-7 20 160 mm dia HDPE PN-6/PE100 21 140 mm dia HDPE PN-6/PE100 22 125 mm dia HDPE PN-6/PE100 23 110 mm dia HDPE PN-6/PE100 24 90 mm dia HDPE PN-6/PE100 25 Supply of the following sizes of Hand Wheel operated with Sluice Valves destination including all taxes and insurance. 26 350 mm dia 27 300 mm dia 28 250 mm dia 29 150 mm dia 30 125 mm dia 31 100 mm dia 32 80 mm dia 33 Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance. (80mm dia) 34 Supply of 25 mm dia screwed down type air valve with gun metal seat at site stone including all taxes. 35 Supply of underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot bend and 63 mm dia standard make iron coupling with cap and chain etc. complete to ISS 909 at site including all taxes. 36 Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches. 37 Dismantlingof following type of surface including all layers, sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 50 m. 38 B.O.E. ROAD 39 BITUMINOUS ROAD 40 C.C. ROAD 41 INTERLOCKING TILES ROAD 42 Reinstatement of following type of road surface. 43 B.O.E. Road with 40% new bricks and 60%used old bricks over 30mm compacted local sand including all materials,labour,T&P etc complete 44 Bituminous Roads with granule sub base (G1-100mm, G2-75mm, G3-75mm thick),50mm thick bituminous macadam over priming coat and tack coat and 30mm thick SDBC/BC over tack coat & disposal of all debris and surplus earthwithin8 Km. distance as per direction of Engineer-in-charge, including all materials,labour,T&P etc complete 45 C.C. Road will be prepared with 10 cm thick P.C.C. 1:2:4 Cement: Coarse Sand & 20 mm Stone grit over base concrete 15 cm. P.C.C. 1:4:8 with cement coarse sand & 40 mm stone ballast after compacting the earth surface properly. The C.C. surface must be compacted with surface vibrator, including all materials,labour,T&P etc complete. 46 Interlocking Tile road:Tiles must be of the thickness & grade similar to that of the dismantled tiles over base concrete 75 mm thick PCC 1:4:8 cement: local sand: stone ballast as per existing road. The thickness of tiles shall be same as that of existing road, including all materials,labour,T&P etc complete. 47 Carting from the store (up to 8 Km.) the following sizes ofD.I & HDPE pipe and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. complete but excluding cost of trenching but including making joints. 48 450 mm dia DI K-7 49 400 mm dia DI K-7 50 350 mm dia DI K-7 51 300 mm dia DI K-7 52 250 mm dia DI K-7 53 200 mm dia DI K-7 54 160 mm dia HDPE PN-6/PE100 55 140 mm dia HDPE PN-6/PE100 56 125 mm dia HDPE PN-6/PE100 57 110 mm dia HDPE PN-6/PE100 58 90 mm dia HDPE PN-6/PE100 59 Carting of D/F Sluice valves of Following sizes to the site of worksLowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valve and specials Required but including the testing etc. complete 60 350 mm dia 61 300 mm dia 62 250 mm dia 63 150 mm dia 64 125 mm dia 65 100 mm dia 66 80 mm dia 67 Carting of 80 mm dia scour valves to the site of workslowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete. 68 Carting of 25 mm dia screwed down air valves to the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete 69 Carting of 80 mm dia flanges fire hydrant to the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete. 70 Supply of all materials, labour T&P etc. required and construct surface box/masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete. 71 Surface box type 72 Masonry type 73 Supply of all materials, labour T&P Etc. required and construct 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia CI manhole cover. 74 Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover. 75 Provision for Large crossing of nala,raod & culverts including shifting of telephone cable etc.along the alignment of pipe line including supply of C.I Tyton pipe and special and also jointing material their laying and iointing testing etc,complete.(FOR 7.0 M WIDE) 76 Provision for Small crossing of nala,raod & culverts including shifting of telephone cable etc.along the alignment of pipe line including supply of C.I Tyton pipe and special and also jointing material their laying and jiointing testing etc,complete.(FOR 3.5 M WIDE) 77 Pump House cumchlorinating room(3.60x3.0x3.0)m and (2.5 x 1.8x 3.00)m 78 Excavation of earth in ordinary soil (loam clay or and) including lift upto 1.5 m and lead upto 50 m.filling, watering and ramming of excavated earth in between the building and sides of the foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50 m from the center of the foundation trenches. 79 Concrete with 40 mm gauge Ist class brick ballast, coarse sand and cement in proportion (8:4:1) in foundation including supply of all materials, labour,T&P etc required for proper completion of work. 80 Ist class brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour,T&P etc required for proper completion of work. 81 150 mm thick RCC plinth bend With cement and approved coarse sand with 20 mm stone grit 1 :1.5:3 including supply of 5% water proofing material, labour, T&P etc required for proper completion of work. 82 Ist class brick work in 1:6 cement and Coarse sand mortar in super structure including supply of all materials, labour,T&P etc required for proper completion of work. 83 M.S. Angle iron chaukhat of 40mm x 40mm size supply and fixing including simple moulding straight work as in chaukhat and also supply of all material, labour, T&P etc. required for proper completion of the work. 84 Supply and fixing of 1mm thick sheet iron panelled door, windows shutter including supply and fixing and adjustment of hinges , bolts, locks, handles, springs and other fittings but excluding supply and painting of fittings. 85 Supply and fixing of hold fast in doors and windows of size 25cm x 4cm x 9mm flat iron including their cutting and moulding and welding to required shape also including other material such as nails and screws etc. required for proper completion of the work. 86 R.C.C. Work cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering and shuttering supply of all materials, labour,T&P etc required for proper completion of work. 87 R.C.C in sun shade with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and bindingits fixing in position with centering, curing supply of all materials, labour,T&P etc required for proper completion of work. 88 R.C.C in lintel with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and bindingits fixing in position with centering, curing, supply of all materials, labour,T&P etc required for proper completion of work. 89 R.C.C in slab with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and bindingits fixing in position with centering, curing, supply of all materials, labour,T&P etc required for proper completion of work. 90 Mild steel or Iron work in plain work such asR.C.C. Work wrought to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work. 91 Mild steel gril in windows, wrought to required heavy/ small size form including supply of all materials,labour,T&P etc. Required for proper completion of the work. 92 Supply and lay complete 40 mm thick insulation layer of sand and clay over reinforcement brick or cement concrete. 93 Providing & lying of Brick Coba 12mm thick laid with M-150 class brick bat Coba 7.50 cm thick with gap of 15mm to each (As per PWD specification) including supply of all materials , labour T&P etc. required for proper completion of the work. 94 12 mm thick plaster with cement coarse sand mortar in 1:6 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper completion of work. From GL upto super structure. 95 12 mm thick plaster with cement coarse sand mortar in 1:4 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper completion of work on ceiling. 96 40 mm thick 1:2:4 plan cement concretefloor with cement,coarse sand and 20 mm gauge approved stone ballast laid in panel finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cement,4 part of coarse sand and 8 part ist class brick ballast 40 cm gauge(1:4:8) and removing any over lapping of mortar at the joist of panel if any and giving them uniform finished including supplymaterial, labour,T&P etc required for proper completion of work. 97 Supply and fix 32 mm thick Flush door shutter including supply and fixing and adjustment of hinges,bolt,locks,handles,spring and other fittings but excluding painting and supply of fitting. 98 Same as above but windows shutters. 99 Supply and fixing of oxidised iron fitting of approved make for doors and windows. 100 Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work. 101 White washing in one coat including supply of all materials, labour, T&P etc required proper completion of work. 102 Providing wall putty on new surface with approvel quality material of Berger/J.K./Birla or similar make 2 coates. 103 Finishing wall with one coat of water proof cementpaint. Weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all marerials, labour, Tools & plant etc. required for proper completion of the work. 104 Same as above but over previously painted surface weather coat. 105 Provide and fixed RCC precast Jalies of 30 cm x 60 cm size including supply of all materials, labour, T&P etc required proper completion of work. 106 Supply and fixing of rolled steel Joist 150 mm x 100 mm including its painting with approved paint and also one coat of primer. 107 Cartage & cost of earth work in filling in plinth including supply of excavated earth from distance of eight km. 108 Supply of all materials, labour, T&P etc. required for construction of 250 mm dia S.C. Drain. 109 Supply of all materials, labour, T&P etc. required for the construction of stilling / Byepass chamber V notch chamber including supply of V notch etc. all complete. 110 Rain water down pipe 100 mm dia PVC with fixed MS clamp etc including supply of all materials, labour, T&P etc required proper completion of work. 111 Boundary WallConstruction of Boundary wall 0.23 m thick and 1.5 m height above plinth level with all materials, labour T&P etc. required for proper completion of work. 112 Construction of pillars as per type design including fixing of gate 3.6 m wide gate and 1.2 m wide wicket gate with all materials, labour T&P etc. required for proper completion of work. 113 Construction of interlocking tile road with 80 mm thick M-30 grade tile over base concrete 75mm thick PCC 1:4:8, cement:local sand:stone ballastfor approach road & water works campus with all materials, labour T&P etc. required for proper completion of work. 114 Provision for inside square drain including supply of all materials labour and T & P etc. complete. 115 Repairing of Existing Building Works (Staff Quarter, Pump House & Boundary Wall) 116 Ist class brick work in 1:6 cement and Coarse sand mortar in super structure, supply of all materials, labour,T&P etc required for proper completion of work.(Old Water Works Campus) 117 12mm thick plaster with cement and coarse sand mortar in 1:6 over existing brick work minimum thickness not to be less than 12mm including supply of all materials, labour, T&P etc. required for proper completion of the work. 118 Supply & fixing of all materials, labours, T&P etc. required for making door shutters by M.S sheet 18mm gauge including supply and fixing M.S 40x40x6 mm size also including angle iron chaukhat supply & fixing of oxidized iron fittings etc. complete. 119 Painting and varnishing all iron work one coat priming and two coat of approved paint oe varnish including supply of all material, labour, T&P etc. required for proper completion of the work 120 weather coats with approved coloring including supply of all material, labour, T&P etc. required for proper completion of the work 121 40 mm thick 1:2:4 plan cement concretefloor with cement,coarse sand and 20 mm gauge approved stone ballast laid in panel finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cement,4 part of coarse sand and 8 part Ist class brick ballast 40 cm gauge(1:4:8) and removing any over lapping of mortar at the joist of panel if any and giving them uniform finished including supplymaterial, labour,T&P etc required for proper completion of work. 122 White washing in three coats including supply of all materials, labour, T&P etc required proper completion of work. 123 Making ferrule connection of various nominal dia of new distribution mains in different type of roads with fixing of saddle piece, service connections, fittings, and fixing of brass ferrule of 15mm size includingtapping the main. Include the cost of excavation and subsequent backfill of trenchs and cost of fittings and specials, including labour charges for cutting, threading &fitting of GI pipe and specials including supply of binding materialssuch as safeda and teflon tape etc.Including making hole in the wall for crossing of GI pipe also repairing the same with mortar and also including crossing of drain with all labour T&Petc. complete. including material i.e.3 meter 20mm dia (OD) HDPE Pipe (12.5 kg/cm2), 2 meter 20mm (OD)GI pipe Class-B, EL-bow 20mm (OD) GI for above pipe Class -B, Clamp with Saddle, TAP/Stop Cock (Brass) 15mm, Ferrule brass HDPE 15mm with end cap (heavy duty),20 mm dia PP-Adopter and 20 mm dia GI - Union. 124 FOR BOE ROAD 125 For 90mmto 110mm dia 126 For 125mm to 160mm dia 127 For 180mm to 250mm dia 128 For 300mm dia 129 For 350mm to 500mm dia 130 FOR CC ROAD 131 For 90mmto 110mm dia 132 For 125mm to 160mm dia 133 For 180mm to 250mm dia 134 For 300mm dia 135 For 350mm to 500mm dia 136 FOR BITUMINOUS ROAD 137 For 90mmto 110mm dia 138 For 125mm to 160mm dia 139 For 180mm to 250mm dia 140 For 300mm dia 141 For 350mm to 500mm dia 142 FOR INTERLOCKING TILES ROAD 143 For 90mmto 110mm dia 144 For 125mm to 160mm dia 145 For 180mm to 250mm dia 146 For 300mm dia 147 For 350mm to 500mm dia 148 FOR KACHHA ROAD 149 For 90mmto 110mm dia 150 For 125mm to 160mm dia 151 For 180mm to 250mm dia 152 For 300mm dia 153 For 350mm to 500mm dia 154 Variation in 20 mm (OD) dia HDPE Pipe w.r.t 3.0 mtr 155 Variation in 20 mm (OD) dia GI Pipe w.r.t 2.0 mtr 156 Construction of LCS/MCS Room 157 Excavation of earth in foundation in ordinary soil (loam, clay or sand) including lift upto 1.50m and lead upto 50m and refilling, watering, ramming of excavated earth into the space between the building and sides of foundation trenches or into the plinth and disposal of surplus earth upto the distance of 50m from the center of the foundation trenches. 158 Cement concrete with 10-12mm gauge approved stone ballast, coarse sand and cement in proportion of 1:1½:3 including supply of all materials, labour, T&P etc. required for proper completion of the work by hand for column 350mm dia 5m high including floor beam and floor slab. 159 First class brick work with cement coarse sand in proportion 1:3 in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of the work. 160 Same as above but in super structure 4.5m high. 161 20mm thick damp proof coarse sand with cement and approved coarse sand 1:2 including waterproofing materials or in the proportion as specified by the manufacturers including supply of all materials, labour, T&P etc. required for proper completion of the work. 162 R.C.C. work with cement, coarse and 20mm gauge approved stone ballast in proportion 1:1½:3 in slab and wall etc. excluding supply of reinforcement and its bending (but including its fixing and binding the same with 0.50 mmthick binding wire) shuttering, centering and supply of all materials, labours T&P etc. required for proper completion of work. 163 * Lintel and sunshades 164 * Slab 165 Providing form work including centering, shuttering and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work in walls. 166 Mild Steel or iron work in plain work such as reinforced concrete brick work (when not including in all over rates) brought to required shape as necessary including bending and cutting for proper completion of workincluding supply of steel and its wastage. 167 12mm thick plaster with cement and coarse sand mortar in 1:4 over brick work including supply of all materials, labour T&P etc. complete. 168 White wash in one coat including supply all materials, labour, T&P etc. complete. 169 Providing wall putty on new surface with approvel quality material of Berger/J.K./Birla or similar make 2 coates. 170 Finishing wall with one coat of water proof cementpaint. Weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all marerials, labour, Tools & plant etc. required for proper completion of the work. 171 Same as above but over previously painted surface weather coat. 172 Supply and fixing 40 mm thick C.P. Teak wood all paneled door and window shutter including supply and fixing of wooden cleat and stops and fitting but exculding their supply and including painting with the two coats of black Japan on all iron fitting of necessary and including fixing the glass pane with putty and board glass to be 0.6Kg. fitting with necessary screen for to be supplied by department. 173 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with that iron diagonal 20x5mm size with top and bottom rails of iron 40x40x6mm with 38mm dia steel pulley with bolts, nuts locking arrangements stopppers, supply and painting one coat of approved red lead paint. 174 Providing and fixing in position rolling shutters of approved make of 80x125mm gauge called rolled M.S. lotha interlocked throughout their entire length and jointed together at the end by end locks and mounted on specially designed pipe shaft with branches shade girder and arrangement for inside and outside locking with push and pull operation complete but excluding the cost of top cover and spring. 175 Mild steel or iron work in small size and section such as holding down bolts, holdfasts, tie rods, grating (when not included in all over al rates) wrought to required terms including suppply of steel bolts and wastage etc. their fixing. 176 Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. From site of work and including watering, dressing etc. complete. 177 Supply and fixing of exhaust fan including supply of all materials, labour, T&P etc. required for proper completion of the work. 178 Supply and fixing of 150 mm, S.W. drain pipe including supply of all materials, labour, T&P etc. required for proper completion of the work. 179 Supply and fixing of 150mm dia A.C. pipe for comb including supply of all materials, labour, T&P etc. required for proper completion of the work. 180 Staff Quarter 181 Excavation of earth in ordinary soil (loam clay or and) including lift upto 1.5 m and lead upto 50 m.filling, watering and ramming of excavated earth in between the building and sides of the foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50 m from the center of the foundation trenches. 182 Concrete with 40 mm gauge Ist class brick ballast,localsand and cement in proportion (8:4:1) in foundation including supply of all materials, labour,T&P etc required for proper compltion of work. 183 Ist class brik work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour,T&P etc required for proper compltion of work. 184 150 mm thick RCC plinth bend With cement and approved coarse sand with 20 mmm stone gritt 1 :1.5:3 including supply of 5% water proofing material, labour, T&P etc required for proper completion of work. 185 Same as item no 3 but in super structure for wall up to 1 brick thick) 186 Supply and fix 32 mm thick Flush door shutter on doors and window including supply and fixing and adjustment of hinges,bolt,locks,handles,spring and other fittings but excluding painting and supply of fitting. 187 R.C.C. Work cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and it bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering nd shuttering supply of all materials, labour,T&P etc required for proper compltion of work. 188 Mild steel or Iron work in plain work such asR.C.C. Work wrough to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work. 189 12 mm thick plaster with cement local sand mortar in 1:4 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper compltion of work. From GL upto supper structure. 190 Same as above but in proprtion 1:4 with cement and fine sand mortar on ceiling 191 40 mm thick 1:2:4 plan cement concretefloor with cement,coarse sand and 20 mm gauge approved stone ballast laid in penel finished with 3 mm loating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cemnet,4 part of local sand and 8 part ist class brick ballast 4 cm gauge(1:4:8) and removing any over lapping of mortar at the joist of panel if an and giving them uniform finished including supplymaterial, labour,T&P etc required for proper compltion of work. 192 Same as above but base concrete of 1:4:8 in cement , local sand and 40mm gauge first class brick ballast etc complete. 193 B.O.E. Flooring in 1:6 cement mortar over 75 mm thick brick ballast base concrete (1:4:8) and surface painted with 1:2 in court Yard. including supplymaterial, labour,T&P etc required for proper compltion of work. 194 Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work. 195 White washing in one coat including supply of all materials, labour, T&P etc required proper completion of work. 196 Providing wall putty on new surface with approvel quality material of Berger/J.K./Birla or similar make 2 coates. 197 Finishing wall with one coat of water proof cementpaint. Weather coat of approved quality on previously new surface with this paint to give an even shade including supply of all marerials, labour, Tools & plant etc. required for proper completion of the work. 198 Same as above but over previously painted surface weather coat. 199 Rain water down pipe 100 mm dia PVC with fixed MS clamp etc including supply of all materials, labour, T&P etc required proper completion of work. 200 Mild steel gril in windows, wrought to required form including supply of all materials,labour,T&P etc. Required for proper completion of the work. 201 Construction of semi circular drain 200 mm dia including supply of all material, labour, T&P etc. complete. 202 Electrification work complete. 203 Sanitation workWater supply work complete. 204 CONSTRUCTION OF TUBEWELL (300x200mm dia) for Zone-3 205 Transportation, Erection, Dismantling of Rig Machine and its T&P 206 Transportation, Erection, Dismantling of Compressor 250/350 PSI 207 Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test 208 Supply of Tubewell AssemblyM.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. (Note- Axial Length of Reducer without Ring shall be measured with casing pipe) 209 300 mm dia M.S. Pipe 210 200 mm dia M.S. Plain/slotted 211 PEA-GRAVEL (As per IS:4097)1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at sitefor Tubewell 212 Drilling of bore by rig machine As Per IS:2800(Part I & II): 213 Drilling of bore by 600 mm dia bit GL to 45 mt. BGL. 214 Drilling of bore by 500 mm dia bit from 45 mt GL to 100 mt. BGL. 215 Drilling of bore by 500 mm dia bit 100 m BGL to 140 m. BGL. 216 Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding: 217 Lowering of 300 mm dia M.S. Housing pipe from GL to 42 m.BGL 218 Lowering of 200 mm dia M.S. Plain/slotted pipe 42 m. BGL to 100 m. BGL 219 Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 126 m. BGL 220 Development of tube well by 250 PSI air compressor and 2/3 cusec O.P. Unit to yield sand free discharge. 221 Development and testing of tube well by Air Compressor. 222 Development and testing of tube Well O.P.Unit to yield sand free Discharge. 223 Chemical and Bacteriologicaltest (Analysis of water sample) 224 Logging of borehole by departmental/approved electric logger 225 CONSTRUCTION OF TUBEWELL (300x150mm dia) for Zone-4 226 Transportation, Erection, Dismantling of Rig Machine and its T&P 227 Transportation, Erection, Dismantling of Compressor 250/350 PSI 228 Transportation, Erection, Dismantling of 1 Cusec/ 3 Cusec O.P. Unit and Yield test 229 Supply of Tubewell AssemblyM.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. (Note- Axial Length of Reducer without Ring shall be measured with casing pipe) 230 300 mm dia M.S. Pipe 231 150 mm dia M.S. Plain/slotted 232 PEA-GRAVEL (As per IS:4097)1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at sitefor Tubewell 233 Drilling of bore by rig machine As Per IS:2800(Part I & II): 234 Drilling of bore by 600 mm dia bit GL to 48 mt. BGL. 235 Drilling of bore by 500 mm dia bit from 48 mt GL to 100 mt. BGL. 236 Drilling of bore by 500 mm dia bit 100 m BGL to 140 m. BGL. 237 Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding: 238 Lowering of 300 mm dia M.S. Housing pipe from GL to 42 m.BGL 239 Lowering of 200 mm dia M.S. Plain/slotted pipe 42 m. BGL to 100 m. BGL 240 Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 126 m. BGL 241 Development of tube well by 250 PSI air compressor and 2/3 cusec O.P. Unit to yield sand free discharge. 242 Development and testing of tube well by Air Compressor. 243 Development and testing of tube Well O.P.Unit to yield sand free Discharge. 244 Chemical and Bacteriologicaltest (Analysis of water sample) 245 Logging of borehole by departmental/approved electric logger 246 PUMPING PLANT AND Voltage STABILIZER for Zone -3 247 Supply, Installation, testing and Commissioning of 2000 lpm , 55 mtr Head Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset, wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc. 248 SITC of 150 mm dia size motor operated actuators with metal sheeted sluice valves 249 SITC of Soft starter for above 40 HP pumpset with RS 485 Port-400V Class for above pumpset 250 SITC of 60 kva stabilizer for above pumpset 251 SITC of equipments for the items as given below : 252 Pressure transmitter 253 Misc. Items such as Protection Ring, Cutout, Electric resistance Rubber sheet, Transformer oil etc.-2019 254 Coloumn Pipe 5 mtr long 255 SITC of NEW PUMPING PLANT & VOLTAGE STABILIZERfor Zone-4 256 Supply, Installation, testing and Commissioning of 600 lpm ,53 mtr Head Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset,wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc. 257 SITC of suitable capacity soft starter with RS485 port- 400 V Class. 258 SITC of 100 mm dia size motor operated actuators with metal sheeted sluice valves 259 SITC of 25 kva stabilizer for above 260 SITC of equipments for the items as given below : 261 Pressure transmitter 262 Misc. Items such as Prtection Ring, Cutout, Electric resistance Rubber sheet, Transformer oil etc.-Sor 2019 263 Coloumn Pipe 5 mtr long 264 SITC OFREQUIRED E&M WORK AS GIVEN AT EXISTING TUBEWELL OF ZONE-1 265 SITC of Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset 266 CE/UL certifeid Actuator for existing valves 267 CE/UL Certifeid Electromagnetic Flow Meter of suitable size 268 SITC of suitable size stabilizer for above pumpset 269 Pressure transmitter 270 Internal electrification of pump house 271 SITC OFREQUIRED E&M WORK AT EXISTING TUBEWELL OF ZONE-2 272 SITC of Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset 273 CE/UL certifeid Actuator for existing valves 274 CE/UL Certifeid Electromagnetic Flow Meter of suitable size 275 SITC of suitable size stabilizer for above pumpset 276 Pressure transmitter 277 Internal electrification of pump house 278 SITC OFREQUIRED E&M WORK AT EXISTING TUBEWELL OF ZONE-4 279 Supply, Installation, testing and Commissioning of 600 lpm ,53 mtr Head Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset,wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc. 280 SITC of Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset 281 CE/UL certifeid Actuator with metal sheeted newvalves 282 CE/UL Certifeid Electromagnetic Flow Meter of suitable size 283 SITC of 25 kva stabilizer for above pumpset 284 Pressure transmitter 285 SITC OF SCADA /AUTOMATION WORK OF EXISTING PUMPING PLANTZONE-1,2 & 4 286 CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid. 287 GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid 288 CE/UL certifeid Intelligent Smart Energy Meter 289 auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc. 290 CE/UL certifeid Surge Protecter for control panel. 291 CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters 292 Complete cabling including power cables of all equipment. 293 control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor. 294 Installation, commissioning & testing trial for tubewell 295 SITC OF SCADA /AUTOMATION WORK OF NEW PUMPING PLANTFOR ZONE 3 & 4 296 CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid. 297 GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid 298 CE/UL certifeid Intelligent Smart Energy Meter 299 CE/UL Certifeid Electromagnetic Flow Meter 150 mm size 300 CE/UL Certifeid Electromagnetic Flow Meter 100 mm size 301 auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc. 302 CE/UL certifeid Surge Protecter for control panel. 303 CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters 304 Complete cabling including power cables of all equipment. 305 control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor. 306 Installation, commissioning & testing trial for tubewell 307 SITC OF AUTOMATIC CHLORINATION SYSTEM 308 Automatic Chlorination System compatible to SCADA system 309 SITC OFAUTOMATION SYSTEM AT EXISTING OHT FOR ZONE 1,2 & 4 310 CE/UL certifeid Radar Type level transmitter for OHT. 311 SITC of actuator for existing metal sheeted sluicevalve 312 CE/UL certifeid Electromagnetic Flowmeter forexistingOHT outlet pipe 313 Installation, commissioning & testing trial for OHT 314 SITC of UPS 3 kva 1phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply 315 Lighting at Water works campus with solar panel and LED light of 1 set 316 SITC OFAUTOMATION SYSTEM AT NEW OHT FOR ZONE 3 317 CE/UL certifeid Radar Type level transmitter for OHT. 318 Actuator of 300 mm dia size with new metal sheeted sluicevalve 319 CE/UL certifeid Electromagnetic Flowmeter 300 mm size 320 Installation, commissioning & testing trial for OHT 321 SITC of UPS 10 kva 3phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply 322 Lighting at Water works campus with solar panel and LED light of 1 set 323 SITC OF CHLORINE ANALYZER FOROHT FOR ZONE 1, 2,3&4 324 Supply, Installation, Testing & Commissioning of Chlorine analyser with MODBUS RTU as per given specification a) FRC sensors(range 0-5ppm)b) Analyzer with RS 485 O/P 325 TRIAL RUN OFTHREEMONTHS FOR ALL ZONE 326 Three months trial run of electro mechanical work with Expenditure on hypo chloride solution,Chaukidar, watch & ward etc for whole scheme 327 SITC OF ELECTRO MECHANICAL EQUIPMENTS ATLOCAL CONTROL STATION 328 CE/UL & BIS Certified industrial grade LARGE SIZE LED MONITOR with lates configuration as per specification. 329 Desktop/PC with i5/i7 processor for as per spec mentioned in tachnical bid documents. 330 CE/UL Certified 3 KVA UPS with batteries as perspec mentioned in tachnical bid documents.( 1 No.For LCS and 4 Nos for tubewells which are not constructed in OHT Campus) 331 Full development version of required TAGS SCADA Software with coustomization of software for LCS as per spec mentioned in tachnical bid documents. 332 GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & receive data & gather data form remote sites to control station,All accessories include signal enhancer antenna along with running expences till DLP. 333 CE/UL certified Firewall for network protection. 334 Surge protector for eternet communication protection. 335 industrial grade Ethernet Switch. 336 canon/hp Laser printer1018 or equivalent 337 Installation,Commissioning ,testing including required furniture,internal wiring,PVC panelling of walls/false ceiling work and Split A/C . 338 Security Survelliance IP Camera with required hard drive to store data of atleast 15 Days 339 Trial run charges for LCS for 3 months
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
Uttar Pradesh View Result →
20.
Drinking Water Supply and Sanitation #9460338 Technical Bid
Tender For Baragaon Nagar Panchayat Reorganization Water Supply Scheme Under Amrit 2.0; CIVIL WORK Pump House 2 Supply of all materials labour for Construction of Pumphouse (3.60 x 3.00 x 3.00 M) CUM Chloronating Room (2.80 x 1.50 x 3.00 M) Including all material labour t&p etc Complete as per design & drawing. As per type design of Jal Nigam as per direction of engineer incharge. 3 Supply of all materials labour for Construction of Additional Dozer Room at every zone for DMA (2..50 x 3.00 x 4.00 M) Including all material labour t&p etc Complete as per design & drawing. as per direction of engineer incharge 4 Supply of all materials labour for Construction ofMCS Room (8.00 x 5.00 x 4.00 M) Including all material labour t&p etc Complete as per design & drawing. as per direction of engineer incharge 5 RISING MAIN FOR ZONE 1 AND 2& BYE-PASS ARRANGEMENT 6 Supply of the following sizes of D.I. pipes Class K-9 conforming to latest I.S. 8329/2000 complete in all respect F.O.R. destination including all taxes and insurance including speials. 7 150 mm DI K-9 8 Supply of the following sizes of C.I. Double flanged sluice valves as per I.S. 780/1960 for testing 10kg/Sqcm F.O.R Destination including all taxes and Insurance. 9 150 mm. dia. 10 Excavation in ordinary soil (lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 10 KM from the center of the foundation trenches.as per direction of engineer incharge 11 Excavation for pipe line in all type of rock by chieselling /blastingincluding supply ofblasting materials and stacking properly useful materials with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within10 KM.as per direction of engineer incharge 12 Carting from the store (up to 8 Km.) The following sizes of D.I. double pipe K-9 and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. 13 150 mm. dia. 14 Carting of D/F Sluice valves of following sizes to the site of workslowering them into already prepared trenches and fixing them In position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. 15 150 mm. dia. 16 Supply of all materials, labour T&P etc. required and construct masonry type sluice valves chamber as per type design including supply and materials labour, T&P etc. complete. 17 Supply of all materials, labour, T & P etc. required and construct thrust blocks in RCC 1:2:4 at the bends and below the Valves. 18 Dismantling and reinstatement of following type of surface including sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 50 m. as per direction of engineer incharge 19 BITUMINOUS ROAD 20 C.C. ROAD 21 Renovation of O.H.T. :- Dismantiling of OHT Flooring , Removing weak concrete hacked, roughended and clean thoroughly of OHT Coloumn for strenthening of OHT Coloumn M S or Iron Work in Plain work Supply of Aporxy resin for Old surface to joint new surface of cement concrete.Jacketing of Cement Concrete 1:1:5:3 Coment Course Sand, Stone Grit Thickness 60 mm Around old coloumn in OHT Including labour T&P etc complete.Construction of RCC foundation of Coloumn Pedestal with 1:1:5:3 cement concrete Dismantling of inner portion old plaster including disposal of malba (vertical wall, cone wall, bottom dome and top dome ).Repairing of Railing of Stair and Balcony with 20mm GI Pipe including changing of old pipe and reflexing new pipe, 12 mm thick Plaster 1:3 Cement and Course sand andwater Proofing Coumpond Chemical over the tank intenal wall and bottom dome to remove the leakage and seepage of tank(vertical wall, cone wall, bottom dome and top dome ). Changing of old & Damaged manhole cover including its fixing Scafoldingfor repairing & Painting of OHT, Dismantling/ Fixing of Inlet, Outlet, Over Flow washout pipe of OHT ,Changing of inlet outlet and washout unserviceable DI Pipe including dismantiling of old pipeand fixing of new pipe 40mm thick PCC (1:2:4) flooring with cement coarse sand and 20mm gauge stone ballast laid in pannels finished with 3mm thick floating coat of neat cement over base concrete 75mm thick consisting of cement, local sand 40mm brick ballast in 1:4:8 including Painting two coats of approved paint Apex Ultima or varnish including supply of all materials, labour and T&P etc required for Proper completion of the work in OHT. as per direction of engineer incharge 22 Design & Supply of all materials, T&P etc required for construction of specified capacity OHT with specified stagingas per following requirements:- 23 Capacity-As Specified in Item No 1.1 to 1.12Grading of OHT- M--35 The food grade epoxy coating of FOSROC / CIEBA GAIKI or reputated brand on the all inside surface area of water container after treatment of water tightness.Stair case- Seperate two column basedRCC staircase and 1 m wide balcony with box type RCC structure at the entrance of the staircase to protect the entry of unwanted persons & locking arrangement with MS door.Railings- 20 mm dia G.I. Pipe (medium quality steel tubes as per IS 1239) railing consisting of 3 rows of with posts height (50x50x6 mm MS angle) (1.0 m) of same pipe around stair case (both sides), balcony & at the top dome periphery, including epoxy 3mm thick coating above base coat, 65mm dia GI pipe (medium quality steel tubes as per IS 1239) ladder with FRP coating from opening of top dome to inside the tank and top of bottom dome. Supply and fixing of CI man hole cover with locking device at opening on the top dome to go inside the tank. Ventilator and Water level indicator - RCC ventilator with SS grill (10 sqm at the spacing of 30 mm) with steel mosquito mesh,electronic digitalwater level indicator with ultrasonic sensor including supply & fixing of solar energy arrangements. Lightening conductor- A good quality lightening conductor covered with PVC casing Vertical pipes- Inlet Pipe - 150 mm, outlet pipe - 250 mm, overflow - 150 mm & washout pipe - 100 mmC.I. D/F pipe as per design criteria upto 1 m beyond the apron, IVC/Kirloskar sluice valve on inlet, out let & at wash out pipe, duck foot bend, puddle collers and bell mouths. 10 mm thick & 150 mm wide S S plate clamp for fixing of verticle pipes with RCC columns (minimum 2 clamps between ends of each pipe). It also includes bye pass arrangement of OHT. The velocity in the pipes shall not exceed 1.5 m/sFlooring, Apron & Drain- 100 mm thick PCC of 1:2:4 & 100 mm thick CC of 1:1:2 with 6 mm thick glass strips not more than 1 sqm area upto 2 m from outer edge of the columns of OHT, drain of size 200 mm x 200 mm with 150 mm thick CC of 1:1:2 including necessary sluice valve chambers and pipe line required for proper drainage of rain water from the campus.Sluice valve chambers- 3 nos. of sluice valve chamber (minimum size 1.5 x 1.5 x 1.5 m or larger size as per requirements of site) of brick work with 200 mm thick RCC slab..Sluice valve chambers- 3 nos. of sluice valve chamber (minimum size 1.5 x 1.5 x 1.5 m or larger size as per requirements of site) of brick work with 200 mm thick RCC slab.Two coat apex painting over one coat primer of approved colour of asian / berger paints after fixing of RCC surface with grinder, repair of minor holes, unevenness etc. proper completion of work.Soil bearing capacity- Structure shall be design on the basis of maximum bearing capacity of 8 tonne/sqm or minimum as per actual on the basis of test report of soil bearing capacity. as per direction of engineer incharge 24 Sub Zone of Proposed OHT 18 m Staging ( Including 1m made of Gl or as per site condition ) 25 Proposed OHT Zone-II 400 kl Capacity and 18 m Staging 26 Cost of Testing for bearing capacity of soil for various sites of proposed OHT 27 DISTRIBUTION SYSTEM 28 Supply of following sizes D.I. K-7 pipes,as per I.S.- 8329/2000 or its Latest ammenmendsuitable for pipe with rubber gasket, coupling, coupler, including supply of specials DI DF/DI DS like Tees, Vertical / Horizontal Bend, Gap Pieces required for case of sectional testing etc and making S/S joints all materials T&P etc. all complete. as per I.S. F.O.R. destination including all local cartage etc complete.. ( Rising main Purpose ) 29 250 mm dia D.I.K-7 30 200 mm dia D.I K-7 31 Supply of the following HDPE Pipes as per B.I.S. code no. 4984/2016 or its latest amendment including cost of 1 HDPE coupler per pipe length and all bend , reducer, tee and all type of spacial which are required in Electro fusion joint fitting inclusive of all taxes and duties, 3rd party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges etc. F.O.R. destination etc. complete 32 180 mm dia HDPE PN10/PE100 33 160 mm dia HDPE PN10/PE100 34 140 mm dia HDPE PN10/PE100 35 110 mm dia HDPE PN10/PE100 36 Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 37 250 mm dia 38 200 mm dia 39 150 mm dia 40 100 mm dia 41 Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance. 42 80 mm dia 43 Supply of 50 mm dia screwed down type air valve with gun metal seat at site stone including all taxes. 44 Supply of underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot band and 63 mm dia standard make iron coupling with cap and chain etc. complete to IS.369/1995 at site including all taxes. 45 Excavation for pipe line work in ordinary soil(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 10 KM from the center of the foundation trenches. as per direction of engineer incharge 46 Excavation for pipe line in all type of rock by chieselling /blastingincluding supply ofblasting materials and stacking properly useful materials with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 10 KMas per direction of engineer incharge 47 Dismantling and reinstatement of following type of surface including sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 50 m. as per direction of engineer incharge 48 INTERLOCKING ROAD 49 BITUMINOUS ROAD 50 C.C. ROAD 51 Carting from store (upto 8 Km) the following sizes of D.1. Pipes (class K-9) and AC pipes (class-15) and specials to the site of work, lowering them in to trenches and taying true to alignment and gradient including testing of pipeline D.I. (K-9) pipes 52 250 mm dia D.I.K-7 53 200 mm dia D.I K-7 54 Carting of following pipes, specials and fittings from site store to site of work, lowering them into trenches, laying true to alignment and gradient, laying and jointing with electro fusion fitting of pipe line including cutting of pipe for making up lengths as required for proper completion of work. 55 180 mm dia HDPE PN10/PE100 56 160 mm dia HDPE PN10/PE100 57 140 mm dia HDPE PN10/PE100 58 110 mm dia HDPE PN10/PE100 59 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge. Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 60 250 mm dia 61 200 mm dia 62 150 mm dia 63 100 mm dia 64 Carting of scour valves to the site of workslowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 65 80 mm dia 66 Carting of 50 mm dia screwed down air valves of following sizes to the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 67 Carting of 80 mm dia flanges fire hydrant of the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 68 Supply of all materials, labour T&P etc. required and construct masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete. 69 Masonry type 70 Supply of all materials, labour T&P Etc. required and construct 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia CI manhole cover. 71 Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover. 72 Construction of thurst block in RCC 1:2:4 at bends & Tee in feeder main to DMAsincluding supply of all labour, material, T&P etc. complete as per the details given below :-No. of DMAs - 4Total no. of bends & Tee - 120 (considering 3 no. bends & Tee in each DMA)Qty. of concrete - 120 x 0.5 cum = 60 cum. (considering 0.5 cum concrete at each bend) 73 Repairing of drain/ public ramp/other miscellaneous structures which are coming in alignment of pipe line and damaged during the laying of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 74 Brick masonry in cement mortar 1:4 75 12mm thick plaster in cement mortar 1:4 76 Providing and laying in position reinforced cement concrete (mix 1:1.5:3)including batching, mixing, placing, vibrating, curing, formwork, finishing,including cost ofall material (Providing nominal reinforcement @ 0.15% of above itemincluding cutting bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete (including cost of binding wire and MS Bar)) and labour, tools and plants required with transportation, loading, unloading,etc., complete for all leads and lifts etc required for proper completion of the work. 77 Provision for crossing of Nalas (0.5mto 2.0 m width) for laying of pipe line including necessary specials, T&P and arrangement of diversion of water, baricatings etc required, with dismantelling of drains and reconstruction of same as per type design of the existing drain. 78 0.3 - 0.5 m 79 0.5 - 1.0 m 80 1.0 - 1.5 m 81 1.5 - 2.0 m 82 Making House Connection in Distribution main including Dismantling of Road, Supply, carting of Specials lowering them into trenches, fixing them including bailing out of water necessary labour, T&P etc. required for proper completion of worksas per direction of engineer incharge 83 250 mm dia D.I.K-7 84 200 mm dia D.I K-7 85 180 mm dia HDPE PN10/PE100 86 160 mm dia HDPE PN10/PE100 87 140 mm dia HDPE PN10/PE100 88 110 mm dia HDPE PN10/PE100 89 Provision of Shifting water house hold connection. 90 For140 mmto 160 mm dia 91 For110 mm dia 92 Barricading of pipe line trenches by using 2 m high hard MS barricading board 2.5x2.0 M, with red flags, Glow-caution boards, diversion boards & red lights. 93 BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD 94 Construction of compound wall comprising of RCC Columns @ 3.0 m c/c distance with beam at plinth and top, brick work in 1:4 of as per type design including supply of all material, labour, T& P etc complete ( 2m height above plinth level 230 mm thick brick wall )as per direction of engineer incharge 95 Supply and fixing 3.60 m wide MS main gate & 1.0 m wide a wicket gate with RCC Columns as per type design & drawing including primer and painting, meterial, labour, T&P etc all complete, as per direction of engineer incharge 96 Supply and Carting of additional earth required to fill up the site to the required formation level At Zone -I and At Zone -II including leveling dressing ramming with proper compection work completed. as per direction of engineer incharge 97 Provide all materials, labour T&P etc. required for proper completion of work and construction of interlocking approach road in water works campous. At Zone -I and At Zone -IIas per direction of engineer incharge 98 Construction of 250X250 mm size drain at W/W sites At Zone -I and At Zone -IIas per direction of engineer incharge 99 GENERAL RESIDENTIAL QUARTERS 100 Construction of staff quarters (1 G.F) including other miscellaneous works. The plinth area of each staff quarter is 57.706 sqm. As per jal nigam type designas per direction of engineer incharge 101 construction ofStaff Quarter at Zone-I 102 construction ofStaff Quarter at Zone-II 103 E AND M WORKS 104 CONSTRUCTION OF NEW TUBEWELL (ZONE-1) 105 Resistivity and hydrological Survey 106 Transportation from store: 107 Transportation, Erection, Dismantiling of DC/RC/DTH Rig machine 108 Transportation, Erection, Dismantiling of 150 PSI Compressor 109 Transportation, Erection, Dismantiling of 1 Cusec / 3 Cusec OP Unit and Yield test 110 Drilling of Tube well bore : 111 Drilling and reaming of 600mm dia bore from GL to 60 m BGL by DC method 112 Bentonyte Powder Bags 113 Tube Well Assembly : 114 M.S. Tubewell Assembly with all required parts like planin pipe, slotted pipe, rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. 115 300mm dia M.S.E.R.W. houseing plain pipe of wall thickness 7.1 mm. 116 Lowering of Tube well Assembly 117 Electrical logging of the bore 118 Lowering of 300mm. Dia M.S. housing pipe G.L. to 59 mtr. BGL 119 Supply of 1.6 to 4.8mm size pea gravel and shrouding of tube well 120 Development of Tube well 121 By Air Compressor 122 Development of Tube well by 150 PSI capacity air compressor 123 By Over Pumping Unit 124 Development of Tube well by OP Unit 125 Chemical & Bacteriological test of water 126 PUMPING MACHINARY TO FEED 400 KL OHT (ZONE-1) 127 SITC of Pumping Plant including, panel, cable, complete in all respect with all required material T&P labour etc. (1000LPM , 61 m Head , 2900RPM, 25 H.P) 128 SITC of Main piping & Valves with 24 mtr. Column pipe, Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 150 mm dia 129 TOOLS (REPUTED MAKE ) IN A TOOL KIT - 1 Set1. Pipe wrenches - 2 No.2. D/E Spanner 22/6 mm - 6 Pcs3. Adjustable wrench 300 mm- 1No.4. Screw driver5. 250 mm- 1No.6. 200 mm - 1No.7. 150 mm- 1No.8. Combination pliers 200 mm- 1No.9. Nose pliers 150 mm - 1No.10.hammer with handle 1 kg.- 1No.11. Line tester (Taparia make)- 1No. 130 SITC of Soft Starter with RS 485 Port- 400 V Class, 18.5 KW, Rating 131 SITC of Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank. ( SCADA Compatible ) 132 SITC of Motor Operated Actuator with Sluice Valve - 150 mm size 133 SITC of CE/UL Certified Electromagnetic Flowmeter-150 mm size 134 SITC of Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable 135 SITC of Auto Phase reversal unit with inbuilt time delay & enclousare ( confirm to IEC:60947-1 & IEC:-60947-b-1) 136 125 Amp Rating 137 ElectricalWorksfor Zone-1 138 Electrical System ( For Tubewell ) 139 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of 01 tubewell as follows:- 140 Indoor Lighting 141 Surface Mounting 142 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 143 Suspended Mounting / Surface Mounting 144 36W LED light fixture 2×2 with acrylic / prismatic front cover. 145 Outdoor Lighting 146 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 147 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW & MCS 148 Complete wiring of Pump house with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 149 Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories 150 Electrical System ( MCS ) 151 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of MCS as follows:- 152 Indoor Lighting 153 Surface Mounting 154 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 155 Suspended Mounting / Surface Mounting 156 36W LED light fixture 2×2 with acrylic / prismatic front cover. 157 Providing & Fixing of Heavy duty capacitor start, copper wind Double ball bearing 900/1400 RPM single phase Exhaust fan as per PWD specification for electrical Works, conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required.(For MCS) 158 450mm sweep (900/1400 RPM) 159 Outdoor Lighting 160 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 161 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW & MCS 162 Complete wiring of MCS with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 163 Instrumentation Worksfor Zone-1 164 Automation of Proposed OHT ( 400 KL ) with DMA 165 Supply of Motor operated actuator without sluice valve at OHT outlet :- Supply of DI/DF Electrically integrated actuater without sluice valve (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 166 250 mm dia 167 Supply of flow control valve with electric actuator for flow controling,pressure monitoring and web based with cable PLC etc Complete at DMA inlet. 168 200 mm 169 Supply of dismantling joint as per requirement and departments approved drawing and specifications, including machining and rubber ring and suitable for 16 kg/cm2 working pressure with required flanges of suitable side with nut and bolt etc. complete. The joint should have long bolts so that during normal working pressure there should be no sliding movement of sliding flanges LOF (length over flange) should not be less than 75% of dia at DMA inlet. 170 200 mm 171 Supply of CE/UL Certified level transmitter for OHT :- Supply of Radartype leveltransmitter with CEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 172 Supply of CE/UL Certified Electromagnetic flow meter at DMA inlet :- SupplyofCE/ULFullBore ElectromagneticFlowMeterofapproved make for remote placesof following dia and specificationscomplete:Media: Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable and also interfacing with PLC panel. 173 200 mm dia 174 Supply of CE/UL Certified Pressure transmitter at DMA inlet :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 175 Supply of Dosing System at DMA inlet :-Supply of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.( SCADA Compatible ) 176 Supply of Residual chlorine analyser / meter at DMA inlet :-Supply of RCA must have automatic sensor cleaning facility at pure water sump and Interfacing with PLC panel. Residual Chlorine meter shall comprises of 3 components i.e. sensors, flow through assembly and transmitter with indicator andgives 2 outputs one to Local display & other to PLC including Mounting arrangement.Overall Range : 0 - 8 mg/l (ppm)Accuracy : 2% of full scaleSupply Voltage : 230 V ac+B7Output : 4-20 mAMembrane free sensor of 2 gold plated electrodes for long term stability and reference electrode (ag/Agcl) must beprovided to avoid maintenance. IP 65 Nema 4 housing protection class required. 177 Installation, cabling of OHT including all equipments with all power and control cable,testingand commissioning complete in all respect. 178 Master Control Station (MCS) 179 CE & BIS approved manufacturers industrial grade LCD monitor with latest configuration as per specification of size 65 180 Desktop/PC as per spec. mentioned 181 CE/UL approved manufacturers 5 KVA UPS with batteries as spec. mentioned for Computer as per requirement 182 Full development version of required TAGS SCADA Software with customization of software for MCS as per requirement as per specification mentioned. 183 CE & UL approved manufacturers control room PLC with CPU & power supply at MCS in IP65 enclosure as per spec. mentioned 184 CE/UL certified field gateway agent for transfering data from MCS to control room 185 GSM based wireless / broadband/Equipment communication system for PLC capable to transfer and gather data from remote sites to control stations, including all accessories complete 186 CE/UL approved manufacturers Firewall for network protection 187 Lightning surge protector for ethernet communication protection 188 CE/UL approved manufacturers industrial grade ethernet switch 189 Mobile App facility system architecture complete. 190 Canon/HP 1018/equivalent Laser printer 191 Security Survelliance IP camera 192 Installation, testing and commissioning with required furniture,Air Conditioner etc 193 Automation of Tubewells (Zone-1) 194 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 195 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 196 CE & UL certified Inteligent Smart Energy Meter 197 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 198 CE & UL certified pressure transmitter 199 CE & UL certified Surge protector for above control panel 200 CE/UL approved manufacturers 3 KVA UPS with batteries as spec. mentioned for Computer as per requirement 201 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 202 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT both. 203 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 204 Installation, commissioning & testing for tubewells 205 AUTOMATION OF DMA (ZONE-1) 206 CE & UL Certified PLC/RTUin IP 54 enclosure suitable to Communicate with GSM based modem unit withCPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 207 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 208 CE/UL Certified Intelligent energy meters 209 CE/UL Certified Surge protector for control panel 210 CE/UL Certified 1 KVA UPS with batteries as per technical bid documents 211 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 212 Control Panel with IP-54 Protection, industrial grade for all equipment. Separate for control (24V) and power equipments 213 Cable 214 (i) Complete cabling 215 Security Survelliance IP Camera with recorder (optional) 216 Installation, commissioning & testing 217 CONSTRUCTION OF NEW TUBEWELL ( ZONE-2) 218 Resistivity and hydrological Survey 219 Transportation from store: 220 Transportation, Erection, Dismantiling of DC/RC/DTH Rig machine 221 Transportation, Erection, Dismantiling of 150 PSI Compressor 222 Transportation, Erection, Dismantiling of 1 Cusec / 3 Cusec OP Unit and Yield test 223 Drilling of Tube well bore : 224 Drilling and reaming of 600mm dia bore from GL to 60 m BGL by DC method 225 Bentonyte Powder Bags 226 Tube Well Assembly : 227 M.S. Tubewell Assembly with all required parts like planin pipe, slotted pipe, rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. 228 300mm dia M.S.E.R.W. houseing plain pipe of wall thickness 7.1 mm. 229 Lowering of Tube well Assembly 230 Electrical logging of the bore 231 Lowering of 300mm. Dia M.S. housing pipe G.L. to 59 mtr. BGL 232 Supply of 1.6 to 4.8mm size pea gravel and shrouding of tube well 233 Development of Tube well 234 By Air Compressor 235 Development of Tube well by 150 PSI capacity air compressor 236 By Over Pumping Unit 237 Development of Tube well by OP Unit 238 Chemical & Bacteriological test of water 239 PUMPING MACHINARY TO FEED 450 KL OHT (ZONE-2) 240 SITC of Pumping Plant including , panel, cable, complete in all respect with all required material T&P labour etc. (1000LPM , 61 m Head , 2900RPM, 25H.P) 241 SITC of Main piping & Valves with 24 mtr. Column pipe, Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 150 mm dia 242 TOOLS (REPUTED MAKE ) IN A TOOL KIT1. Pipe wrenches - 2 No.2. D/E Spanner 22/6 mm - 6 Pcs3. Adjustable wrench 300 mm - 1 No.4. Screw driver5. 250 mm - 1 No.6. 200 mm- 1 No.7. 150 mm - 1 No.8. Combination pliers 200 mm - 1 No.9. Nose pliers 150 mm - 1 No.10. hammer with handle 1 kg. - 1 No. 243 SITC of Soft Starter with RS 485 Port- 400 V Class, 18.5 KW, Rating 244 SITC of Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank. ( SCADA Compatible ) 245 SITC of Motor Operated Actuator with Sluice Valve - 150 mm size 246 SITC of CE/UL Certified Electromagnetic Flowmeter-150 mm size 247 SITC of Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable 248 SITC of Auto Phase reversal unit with inbuilt time delay & enclousare ( confirm to IEC:60947-1 & IEC:-60947-b-1) 249 125 Amp Rating 250 Electrical Worksfor Zone-2 251 Electrical System ( For Tubewell ) 252 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of 01 tubewell as follows:- 253 Indoor Lighting 254 Surface Mounting 255 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 256 Suspended Mounting / Surface Mounting 257 36W LED light fixture 2×2 with acrylic / prismatic front cover. 258 Outdoor Lighting 259 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 260 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW 261 Complete wiring of Pump house with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 262 Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories 263 Instrumentation Worksfor Zone-2 264 Automation of Proposed OHT ( 450 KL ) with DMA - Zone-2 265 Supply of Motor operated actuator without sluice valve at OHT outlet :- Supply of DI/DF Electrically integrated actuater without sluice valve (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 266 250 mm dia 267 Supply of flow control valve with electric actuator for flow controling,pressure monitoring and web based with cable PLC etc Complete at DMA inlet. 268 200 mm 269 Supply of dismantling joint as per requirement and departments approved drawing and specifications, including machining and rubber ring and suitable for 16 kg/cm2 working pressure with required flanges of suitable side with nut and bolt etc. complete. The joint should have long bolts so that during normal working pressure there should be no sliding movement of sliding flanges LOF (length over flange) should not be less than 75% of dia at DMA inlet. 270 200 mm 271 Supply of CE/UL Certified level transmitter for OHT :- Supply of Radartype leveltransmitter with CEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 272 Supply of CE/UL Certified Electromagnetic flow meter at DMA inlet :- SupplyofCE/ULFullBore ElectromagneticFlowMeterofapproved make for remote placesof following dia and specificationscomplete:Media: Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable and also interfacing with PLC panel. 273 200 mm dia 274 Supply of CE/UL Certified Pressure transmitter at DMA inlet :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 275 Supply of Dosing System at DMA inlet :-Supply of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.( SCADA Compatible ) 276 Supply of Residual chlorine analyser / meter at DMA inlet :-Supply of RCA must have automatic sensor cleaning facility at pure water sump and Interfacing with PLC panel. Residual Chlorine meter shall comprises of 3 components i.e. sensors, flow through assembly and transmitter with indicator andgives 2 outputs one to Local display & other to PLC including Mounting arrangement.Overall Range : 0 - 8 mg/l (ppm)Accuracy : 2% of full scaleSupply Voltage : 230 V ac+B7Output : 4-20 mAMembrane free sensor of 2 gold plated electrodes for long term stability and reference electrode (ag/Agcl) must beprovided to avoid maintenance. IP 65 Nema 4 housing protection class required. 277 Installation, cabling of OHT including all equipments with all power and control cable,testingand commissioning complete in all respect. 278 Automation of Tubewells (Zone-1) 279 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 280 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 281 CE & UL certified Inteligent Smart Energy Meter 282 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 283 CE & UL certified pressure transmitter 284 CE & UL certified Surge protector for above control panel 285 CE/UL approved manufacturers 3 KVA UPS with batteries as spec. mentioned for Computer as per requirement 286 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 287 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT both. 288 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 289 Installation, commissioning & testing for tubewells 290 AUTOMATION OF DMA (ZONE-2) 291 CE & UL Certified PLC/RTUin IP 54 enclosure suitable to Communicate with GSM based modem unit withCPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 292 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 293 CE/UL Certified Intelligent energy meters 294 CE/UL Certified Surge protector for control panel 295 CE/UL Certified 1 KVA UPS with batteries as per technical bid documents 296 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 297 Control Panel with IP-54 Protection, industrial grade for all equipment. Separate for control (24V) and power equipments 298 Cable 299 (i) Complete cabling 300 Security Survelliance IP Camera with recorder (optional) 301 Installation, commissioning & testing 302 TRAIL & RUN (Without Electricity) for03 Months Trial & Run for Zone-1,2
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
22.
Public Administrative Department #9243419 AOC
Supply Of Medical Equipment And Instruments ( 2023-2024, 2024-2025 Two Years ) , Fogger Machine For Fumigation & Disinfectant Tasks ( High Power Jetain Watts Inpleallarfansystem 600 Watts-5 Ltr Tank Capacity , Boyles Appratus ( 2 N2o Provision Safty N2o Cuttoff, O2 Failure Alarm ) :- Specification :- • Anesthesia Work Station With Vantilator & Veporiser ( Qty-01 ) • Diamention:- 1356Mm X 845Mm X 620Mm • Two Gas Machine With Oxygen & Nitrus Oxide With Each Yoke • Vantilator Should Be Minium 8 Inch Touch Screen With Tidal Volumn 20Ml To 1500Ml, Suports Vantilator Mode Iipv, Pcv, Simv-Vc, Manual, Ps / Cpap ( With Apena Backup, Standby ) . • Vanylation Monitaring:- Pressure:Ppeak, Pplat, Peep, Pmean • Volumes:-Mv, Vt Respiratory Freq. Compliance Etc • Waveform Display P-T, F-T, V-T • Sutable For Adult &Paed. • Should Be Double Tube Machanical Flowmeter For Each Gas . • Suport Two Veporiser Mount & Two Drawers • It Should Be Ce Certified. • Alaram -High / Low Airway Pressure, High / Low Minute Volume, Power Failuer, Oxygen Supply Failure, Apnea, High / Low Fio2 Specification :- ? Anesthesia Work Station With Vantilator & Veporiser ( Qty-01 ) ? Diamention:- 1356Mm X 845Mm X 620Mm ? Two Gas Machine With Oxygen & Nitrus Oxide With Each Yoke ? Vantilator Should Be Minium 8 Inch Touch Screen With Tidal Volumn 20Ml To 1500Ml, Suports Vantilator Mode Iipv, Pcv, Simv-Vc, Manual, Ps / Cpap ( With Apena Backup, Standby ) . ? Vanylation Monitaring:- Pressure:Ppeak, Pplat, Peep, Pmean ? Volumes:-Mv, Vt Respiratory Freq. Compliance Etc ? Waveform Display P-T, F-T, V-T ? Sutable For Adult &Paed. ? Should Be Double Tube Machanical Flowmeter For Each Gas . ? Suport Two Veporiser Mount & Two Drawers ? It Should Be Ce Certified. ? Alaram -High / Low Airway Pressure, High / Low Minute Volume, Power Failuer, Oxygen Supply Failure, Apnea, High / Low Fio2 , Baby Radint Warmer With Inbuilt Led Phototherapy Unit • Should Be Micro Controller Base, • Should Control Servo Skin , Pre Warm & Manual. • No Need Of Calibration Required For Temprature Prob. • Heater Modual Should Rotates 90° To Both The Sides To Facitate. • Phototheapy Light Sourc At List 24 Blue Led, 3 White Led. • >Irradiance 45 Uw / Cm2 / Nm At A Distance Of 30Cm. • Should Be Compatible For X-Ray Procedure. • Should Be Iso 13485:2016 , Standard Examination Couch. Size: L 1830Mmxw575mmxh850mm Frame Crca Rectangular Tube. Crca Sheet Cabinet. One Cabinet &One Drawer With Lock Sliding Step Stool &Writing Pad. 100Mm Thick Reversible Foam Mattress. Stainless Steel. , Gyanec Examinaton Table: Size L1820mmxw560mmxh815mm. Frame Bend Press Crca Sheet Top With Back Rest Adjustable On Ratchet. Perinial U Cut At Foot End .Crca Tubular Legs .Step Stool &Mattress .Lithotomy Bars With Stirrups. Stainless Steel. , Myo’S Trolley Tray Size- 410Mmxlx560mm W Stainless Steel, Height Adustment From 890 Mm To1400 Mm, 50Mm Diameter Wheels , Seating Arrangement: Four Seater 72” Length. , Adult Weighing Machine , Adult Weighing Machine , Instrument For Paediatric And Neonatalweighing Scale For Neonatal , Oxygen Hood, S And M, Sector 0 Each Including Conneting Tubes , Resucitor Hand- Operated Nenonatel- 250 Ml , Larygoscope Hand- Operated Neonatel – 500Ml , Larygoscope Set, Neonatal , Suction Machine Foot Operated , Neonatal Pulse Oxymeter , Electronic Weighing Scalefor Baby 10G<5 Kg , Stethoscope For Neonates- Binaural , Electronic Spygmomanometer , Electronic Mobile Light Examination Mobile ( 220-12 V ) , Vinyl Coated Measuring Tap – 1.5 M , Basic Kidney Tray- Stainless Still ( 825 Ml ) , Infusion Stand Withdoubblehook On Castors , Glucometer With Sugerstrips , Sugerstrips , Nebulizer Pulmoaid Type Heavy Duty. Isi Mark. , Re-Breathing Bag With Valve .05 Ltrs. , Re-Breathing Bag With Valve 2 Ltrs. , Laryingo Scope With Ambubag Silicon Caff White Adult. I.S.I Marks. , Electric Sterilizer Stainless Steel Medium Sizes Marks I.S.I , Plaster Cutting Scissor , Plaster Cutting Machine Electric , Plaster Spreader , Silicon Ambubagwith Tubing, Mask , Nebulisation Mask Pediatric , Nebulisation Kit Big , Nebulisation Kitsmall , Needle And Syringe Destroyer ( Hub Cutter ) , Ilr Refrigeratorwiththermometer Ice Lined Refrigerator With Dual Interior Layer Design With Built In Ice Packs To Maintain The Temperature Of The Refrigerator Double Walled With Inner Chamber Made Of S.S. And Outer Of Thick Pcrc Sheet Duly Enamels Painted. Temprature Range From Ambient To -2°C To 8°C Is Achieved By Hermertically Sealed Compressor. Body Mounterd On A Study Angle Iron Frame And Is Mounted Orcaster Wheels. Unit Is Fitted With Solid State Digital Tempreatureindicator- Cum-Controller 6 Cuff. ( 180 Liter ) , Tunning Fork , Knee Hammer S.S. Handle , Instrument &Machines. For Dental Department. Electro- Surgical Cautatory Machine For Dental Use Only Coltence-Valdent Type , Air Rotor Hand Pieces. ( Kavo / Nsk ) , Composite Material Kit. ( Ivoclar-Teric M Cream ) Aesthatic Kit ( Shelf Life ) , Apex Locator Root Zx-Ii , Pro-Taper Files Total - ( Sx, S2, F1, S1, F2 ( 25 Mm Length ) , Teflon Coated Composite Hand Instrument Set , Diamond Burs ( Cavity Cutting ) Set ( 1X5 ) , Mummifying Agent , Glass Inomomer Cement Type -Ix Gc Large , Glass Inomomer Cement Type -Ii , Sponge Holder 10 , Suction Tips. ( Silicon ) , Suture Cutting Scissor , Extraction Forceps Sets ( Pedo ) / Routine Forceps Set , Mouth Mirror ( Anti- Fogging ) , Pro Taper Gutta Parch Filling Material- 6% ( F1, F2 ) ( Gp Points ) , Twizzer , Routine Gp Point ( Red, Yellow, Blue ) , Probes , R.C. Help , Rotary Root Canal Smart Systemdensply Sybron Endo , Rvg System With Laptop And Printer , Dental Loops , Dy Cal , Rct- / H-Hand Files 10 / 15 / 20 / 25 , K Files Hand , Rct-Sealer ( Resin Based ) Ah-Plus , Dental X-Ray Machine , R.C. Cal ( Calcium Hydroxide ) , Root Canal K-Files ( Dentsply ) , Gas Torch With Refill Culinders , Root Canal Dressing Cement Premixed , Lingnocaine Inj Gun For Cartridges With Aspiration , Advance Dental Chair With Accessories Programe Attachment Features: 1.Left-Handed Dental Chair 2-Body- Contoured Electrically Operated Dental Chair With Zero Programme With Right Arm Rotatble ; 6- Programmes 3- Led Operating Lilght Having 30000Lux On / Ofanfintensitucinto By Non Touch Sensor With 3 Directional Movement 4- Chair Side Proreclain Spittoon With Auto Water Connection 5- High Ns Low Vcummotorized :Dryco” Susctionwith Auto Drain And Autoflush System 6- Modular ( Delivery Hanging System ) 7- Airotor Points – 2 Nos. 8- Supreme Micromotor 35000 Rmp With Digital Display Of Speed 9- Beecool Turbo Light Cure 10- Ss Instrument Tray 11- X-Ray Viewer 12- Ultra-Sonic 13- Light Cure Attachment Specification • Electric Lly Operable • Seamlessnseat Upholstery • Ceramic Spittonand Tumble • Halogen Light Packing • Dental Chair With Sto • Ceramic Spitton& Tumbler • Halogen Light • Instrument Tray • Foot Control • Two Threewaysyring • Provision For Three Airotor& A Micdromotor , Instrument For Gynecology / O.T Department Hydraulic Opertion Table With All Function Genral Surgery Specification:- 1. Size – 72 X 24 X 30 2. Table Type – Hydraulic 3. Hight Adjustable Range ( In Mm ) – 750-1000Mm 4. Trendelenburg ( Indegrees ) : + / -25 Degree 5. Table Length – 1900Mm 6. Material – Stainless Steel 7. Table Width ( In Mm ) – 520Mm 8. Lateral Tilt – 20 ( Degree Both Side ) 9. Leg Section–90 ( Degree Down Manual ) 10. Head Suction: + / -60 Degree 11. Back Section : + / -60 Degree 12. Floor Locking System- Manual 13. Center Pillar 14. Inbuild Kidney Bridge 15. Five Sectional Radio- Translucent , Hi- Pressure Steam Sterilizer With All Accesessories • Shape & Dimension : Cylindrical To Fit 3 Drums Of Size 15”X 12” • Capacity : 200 Liters. Size: 20” X 39” ( 500Mm X 1000Mm ) • Mode Of Heating : Electrically Heated By Water Immersion Haters Of 18 Kw Electric Load Wired For Operation On 3-Phase 4-Wire, 400 / 440 Volts 50 Hz. A.C. Supply. • Working Pressure : 30 Lbs / Squ. Inch. 2.20Kgf / Cm2 / Adjustable. • Operation Pressure : 2.10+0.15 Kgf / Cm2 ( 30Psi ) / Adjustable. • Operating Temprature : About 134 Degrees Centrigrade And / Or Adjustable. • Exhaust : Fast Exhaust Withing 1 Minute & Slow Exhasut From 7 To 30 Minutes. • Performance : The Sterlizer Should Be Capable Of Performing The Following Operations Constituting One Full Cycle Of Strelization. • Material Consturction : The Material Should Be Ss Sheet Of Grade 304, Jacket, Boiler, End Ring, Piping & Conecctions, Dished Door, Outer Cover • Multiport Valve : To Control The Cycle Of Strelization As Per Bis Standards. • It Should Be Fitted Safety Valve, Ejector, Drying System, Vaccum Breaker, Plug Screen, Tempreature Gauge, Pressure Gage, Compound Gauge, Steam Trap, Strainer And Check Valve • Boiler ( Steam Generator ) : Fitted To Underside Of Jacket. • Tray ( Stainless Steel ) : Provide In The Chamber Of The Suitable Size. • The Whole Unit Should Mounted On A Tubular Pipe Stand With Levelling Flanges And Duly Painted With Best Heat Resisting Epoxy Paint. , Nerve Locator With All Necessary Accsessories , Operatontheators Shadowless Lamp Celling Model ( 4+3 Petal ) Specification:-Should Be A Surgical Light Unit Incorporating The Latest Led Technology Shadowless Operatinh Light Field With The Following Specifications. A ) Shouldd Have Double Colour High Performance Leds With Life Time More Than 50, 000 Hours. B ) Should Be A Dual Dome And The Main Light And Satellite Should Have The Following Specifications C ) Lux Intensity 1, 35, 000 Lux & Satellite 1, 35, 000 Lux Or Above. D ) Light Field Diameter Should Be Above 210 Mm Or Better. E ) Colour Temperature Should Be Between 3800 To 5000 Degree K F ) Colour Rendering Index Should Not Be Less Than 93 G ) Depth Of Illumination Should Not Be Less Than 125 Cm. H ) Lllumination Adjustment 30% To 100% With Field Indication. I ) Led Done Should Have At Least 8 Nos Of Yellow Leds To Achieve Warm White Light For Surgeons’ Comfort. J ) Each Arm Should Have 320-Degree Rotation K ) Linear Intensity Control Should Be Provided On Main As Well As Satellite Done. L ) White And Yellow Led’S Should Have Individual Control With The Help Of Remote Control. M ) Each Dome Should Have 4 Reflectors With Aluminium Body To Dissipate Heat. I. Intensity Of Each And Yellow Light Should Be Controlled By Feather Touch Button On Dome Arm As Well As By Wirless Remote Control. Ii. Total No Of High Intensity Led’S In Each Dome Should Not Exceed 48 Nos.Led Dome Should Have At Least 8 Nos Of Yellow Led To Achieve Warm Whit Light For Surgeons’ Comforts , Operation Theater Shadow Less Lamp Celling Model ( 3 Petal ) [ Specifiction : As Per Same Above Tender Item No. 79 But This Item Is For 3 Petals ] , Stand Lamp Light With Moving System Shadowless K Floor Model , N.S.T. Machine For Gynocology Dept Usespecification :- Trolley Mounted, Table Top, Features, With Hart Rate Monitor, With Printear, Approx. Weight- 3To 4 Kg, Power Consumption < 20 Watt. , Laproscope For T.L. With All Accessories. Specification – Double Puncturescope, Reusable, Refurbished, For T. Gynacoligy Surgery, Material S.S., Led Light Source With Fibre Optic Cable, Veress Needle, Ring Applicatror And Multifunction S.S. Trocar. , Sim, S Speculumset Large, Medium, Small ( Stainless Stell 304 Certificate Is Must ) 1 Set In 3 Nos ) , Digital Fetal Monitor Doppler Specification:- 1. Size - 135Mm X 95Mm X 35Mm 2. Weight – 500Gm Including Battery Weight 3. Display – 45Mm X 25Mmlcd 4. Battery – 2 Pices Of 1.2V Recharable Battery 5. Performance Parameter – Working Frequancy Of Ultrasonic Is 2.5Mhz, ±10% Nominal Standered , 200Mm Distance From Prove, Intergrated Sensitive >_90Db, Display Range 50-230Bpm ( ±2Bpm ) , Tooth Forceps , Delivery Forceps ( Outlet Blade ) , Bipolar Cautary Machine ( Eclipse ) , M.T.P. Suction Machine ( Electric ) Isi Marks , Vacuum Extractor ( Vacuum For Delivered With Silasble Cup- Metallic Cups ) , Cu S Cos Speculums ( Stainless Steel 304 Certificate Is Must ) , Sim, S Speculum Set Of Large, Medium, Small ( Stainless Steel 304 Certificate Is Must ) , Curved Artery Forceps Size-6 ( Stainless Steel 304 Certificate Is Must ) , Vulcellum Forceps , Curved Mosquito Artery Forceps Size-6 ( Stainless Steel 304 Certificate Is Must ) , Needle Holder Size-6 ( Stainless Steel 304 Certificate Is Must ) , Scissors 8 Straight Only , Stout Scissors 8” , Tailor Scissor Big , Curved S.S Scissor Size-6 ( Stainless Steel 304 Certificate Is Must ) , Curved S.S Scissor Size-8 ( Stainless Steel 304 Certificate Is Must ) , Sharp Scissor Size-8 ( Stainless Steel 304 Certificate Is Must ) Stiles ( Curved ) , Curved Sharp Scissor Size- 8 ( Stainless Steel 304 Certificate Is Must ) Stout , Stainless Steel Dressing Drums- Size – 12”X 15” , Stainless Steel Dressing Drums- Size – 9”X 11” , Stainless Steel Dressing Drums- Size – 9”X 9” , Stainless Steel Dressing Drums- Size – 6”X 6” , Stainless Stell Tray With Cover Size- Large , Stainlesstray With Cover Size- Medium , Stainlesstray With Cover Size- Small , Enamal Tray Size – 20”X14 Without Cover , Enamal Tray Size – 13”X15” Without Cover , Instrument For Laboratory Hot Air Oven Specification- Size- 18X18x18 Two Tray 400 Kw, 230V, 4 Amp With Digital Display &Timer. , Incubator Specification- Size- 18X18x18 Two Tray 400 Kw, 230V, 4 Amp With Digital Display &Timer , Binocular Microscope • Provide With Binacular Observation Head Inclined At 45 Degree Rotable Through360 Degree And With Interpupillary Asdjustment. • With Hygenianeye –Pieces 10X, 15X ( Paired ) Achromatic • Objectives: 5X, 10X, 45X &100X Oil Immersion ( Spring Loaded ) Detachable Mechanical Stage. • Magnification : 50X To 150X , Centrifuge Machine- Specification- 16 Tubes With Digital Display &Timer. , Fully Automedrandam Access Clinical Chemistry Analyser With Ups 1- Indian Made 2- 200 Test / Hour 3- Table Model 4- 45 Hard Glass Cuvettes , Semi Auto Biochemistry Analyser Specification :- Mono &Bichromatic Measurement Photometric Range From 0 To 3.0 Od Photometric Resolution Up To 0.0001 Automatic Zero Setting Static Photometer : 340-630 N.M. Wavelength : 340, 405, 505, 546, 578, 630 N.M. Mult-Point Calibration With Graphical Display Levy-Jennings Graph For Quality Control 1000 Test Patient Pesults Storage Peristalitic Pump Aspiration System With Calibration Facility Dual Cuvette System: • Flow Cell Volume-33?L • 10 Mm External Glass / Polystyrene Aspiration Volume From 350 To 999 ?L Tempreature Control At 25°, 30° & 37° C Repeat Measurement By Read Key Collated Report Date Wise, Id Wise ( Alphanumeric ) Inbuilt Thermal Printer Direct Printer Connectivity Through Usb Port Usb Connectivity To Pc Connectivity To External Incubator ( Optional With 16 Position ) , 3 Part Hematology Analysertotal Parameter :22 Total Parameter :22Specification:-The Instrunment Should Be Fully Automated 3-Part Differential With 22 Parameters Offering Automatic Start Up, Shutdown And Sample Analysis I. The Instrument Should Have Cyanide Free / Colorimetric Method For The Hemoglobin Measurement. Ii. The Instrument Should Report Minimum 22 Parameters Including, Wbc, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Plt, Lym#, Mid#, Grant#, Lym%, Mid%, Grant%, Rdw-Sd, Rdw-Cv, Pdw-Sd, Pdw-Cv, Mpv, Pct, P-Lcc, P-Lcrwith Three Histograms-Wbc, Rbc, Plt Iii. The Instrument Should Have A Throughput Of 60 Samples / Hour Iv. The Instrument Should Have Around 50, 000 Searchable Sample Data Storage. V. The Instrument Should Have Colored 10.4” Lcd Touch Screen With Intuitive Menu Icons For Easy Operation Vi. The Instrument Must Have Provision To Incorporate Morphological Findings & Other Test Results Like Blood Group & Rh Type, Esr, C-Reactive And Reticulocyte Counts Etc. In The Instrument Report Printout Vii. The Instrument Should Have In-Built Thermal Printer And 4 Usb Interface For Connecting External Printer, Keyboard, Mouse, Barcode Scanner Viii. The Sample Volume Should Not Exceed 9 ?L In Manual Mode, 20?L In Pre-Dilute & Capillary Mode Each Ix. To Ensure Economy As Well As Better Reagent Inventory Management, The Number Of Reagent Types “That Are Required To Be Connected To The System” For Operation Should Not Xceed 2 Types Preferably ( Excluding Calibrators, Controls And Other Ancillary Reagents That Are Not Required During Each Sample Analysis ) X. Instrument Should Have In-Built Real Time Inventory Management System To Track Usages Of Reagents Xi. Instrument Should Have Facility To Auto-Dispense Pre-Defined Volume Of Diluents For Pre-Dilute Mode Xii. The Company Supplying The Instrument Should Hav A Good Track Record And Excellent Service And Distributor Network All Over India. Cbc, Wbc, Rbc, Hgb, Hct, Mcv, Mch, Mchc.Pdw-Cv, Rdw-Sd’Plt, Mpv, Pct, Pdw-Cv, Pdw-Sd, Plcr, P-Lcc, 3 Part Diff:Lymp% & #, Mid%&# Grab%&# Throught – 60 Test / Hr. Histogram- 3 ( Wbc / Rbc?Plt ) Data Storage 50, 000 Result With Graps Quality Control -500 Files With L-J Grapj X-Bar Analysis , Electronic Shaker For Lab , Manual Vacuum Aspirator With Carman Canula. , Electric Fumigation Machine For O.T Fumigation Isi Mark , Vision Chart With Plain Mirror. , Trial Box Set , A Scan Biometer Technical Specification :- • Transducer Prob:- • Frequencey -10Mhz + 10% • Fixation- Internal Red Led • Modes- Auto + Save • Measurment Range-Manual 15 To 45Mm Axil Length • Display :- 7” Tfl Display With Touch Screen • Power :- 100-240 Vac, 50-60 Hz, 0.3A • Diamention ( Wxhxd ) :- 8”X5.5”X2.5” • Accessories :- • Usb Thermal Print • Foot Swith • Power Adopter ( 5V, 4A ) • Immersion Shell With Tubing , E.N.T. Microscope-With All Accessories Specification. 1 ) Microscope Body Withapochromatic Optic Having 5- Stepmagnification Changer. 2 ) 12.5 Wide Field Eye Pieces With Locking Diopters 3 ) Objectives 200Mm, 300Mm, 40Mm 4 ) Manual Binocular Tube With 200 Mm Focal Length. 5 ) Tiltable Binocular Tube With 200 Mmfocal Length. 6 ) Movable Floor Mounted Red Dot Stand With Locking Casters. 7 ) 100 Watt 12 Volt Halogen Illumination In Stand With Easy Change Overfacility For The Back Up With Halogen Lamp / Or Led. 8 ) Microscopic Arm Should Be Minimum One Meter In Length. , C- Arm Machine With Table 9 Inch With Stabilizer • Mobail Surgical C- Arm With 9 Inch Immageintenicifire With 3.5 Kv High Frequency Genrator, •2 Monitors / 1 Hd Monitor • Pc Work Station, •Ability To Store More Than 1000 Immages • Application For Orthopedic, Urology, Neorology& Gastro Etc , Drill Machine For Ortho Battery Oprated ( Bell / Manman / Metronik ) , Micro Ear Instruments, , Auto Reftractometer ( Computor For Eye Checkup ) Technical Specification :- • This Equipment Should Be Usefull For Finding Out Automatic Reading Refraction &Kerometer. • Auto Alignement Auto Focus. • Retraction :- 1.Sphere Range :- Minus 25 Plus 22 Dioptersapprox 2. Cylinder Range: Zero To Ten Dioptersapprox 3. Axis Range : 1 To 180° • Keratometry • Corneal Curvature Radius 5Mm To 10Mm Aprox • Corneal Refraction 66 To 33 Dioptersaprox • Built In Printer Facilityshould Be Available • It Should Be Able To Gove Reading With Pupil Size Min2mm • Motoritized Table Should Be Supplied To Keep The Auto Refractometer • Digital Display • Usp Backup , Opthalmic Microscope With Assitant Scope & Integrated Hd Camera Attachment Specification :- • Main Microscope • Binacular Tube – Parallel 45°Inclimedbinacular Tube • Objective Lence – F=200Mm • Eye-Pice -12.5X • Magnification Change Type- Drum Type With Five Change • Total Magnifiaction- 3.4X, 5.3X, 8.5X, 13.5X, 21.2X • Field Of Vew –Ø66.2, Ø42.4, Ø26.5, Ø16.6Ø10.6Mm • X-Y Translator ( Option ) Range :±25Mm • Arm Counter- Balance • Length –F=200Mm • Rotation Angle -12.5X • Column Base • Base Diamention -740Mm • Power Unit: • Primary Voltage Ac100-120 / Ac220-240V • Pawer Frq. :- 50-60Hz • Max Pawer Consuption :-180Va , Remote Control Distance Snellen Chart , Ent Opd Instrument Set , Electronic Shaker For Lab , Post Mar-Tum Set ( Mfg By Tuft ) , Slit Lamp , Double Door Cupboard Type Refrigerator Capacity 868 Ltr , Abg Machine , Defibrilator Machine With Standard Accessories ( For Icu Unit ) ? Monophasic Defibrillator ? Lcd Display 5.7’ ? Event Recording ? Thermal Printing Specification: ? Energy Select With External Internal Paddles ? Charge Led Indicator On Front Panel ? Sync Mode Indication Message On Monitor Screen ? Integrated Adult & Paeditaric Paddles ? Ecg Out 1V / Mv ? Defibrilator Protection , Proctoscope Medical Instrument , 3 K.V. Online U.P.S. , 5 K.V. Online U.P.S.
Contract Date: Jun 22, 2026 Contract Value : 1.05 Crore
Government Departments No of Bidders 15
Maharashtra View Result →
24.
Educational and Research Institute #9111244 Technical Bid
Auction-Of-Scrap-Items Auction-Of-Scrap-Items , C½ , Scrap Items- Category ( A ) , Scrap Items- Category ( B ) , Scrap Items- Category ( C ) mputer With Accessories - 386 (20MHz) Non cach/2mb RAM/101keys keyboard / 1x1.2mb FEDH 1x360 kb FDD/1x80MB (F) HDD/ 2Serial and 1 Paralled Parts /387@20MHz/60 mb CTD/4”VGA card /MS DOS 4.01/ Tower Model 2. printer LQ1050epson (132 col. 264 (ps) 3. Floppy 48 TPI (box of 10) 4. floppy 96TPI (box of 10), 5. printer stand 6. Ups 1kva 01 1 Compaq pro 7500 Intel pentium 01 1 Hardening Shed 900 m square 2. UPS 1 KVA Sl. No. 10019840802 01 2 Compaq ij printer 01 3. Online UPS 1 KVA 01 3 Compaq s4100 scanner 01 4. Scanner HP 5590 01 4 Acc pac accounting 01 5. Inverter 2 KVA KTMC Sl. No. 098608 01 5 HP DJ 840C ij printer 01 6. Trolley for Inverter PVC 01 6 1 KVA “UPS supported Exide Battery” 01 7. Online UPS 1 KVA 01 7 HP LJ printer 1150 01 8. 42 AH Excide Power SMF Battery Model No. EP 42-12 02 8 UPS 2 KVA 60 min. backup Excide Battery 01 9. Stand Coated Projector SGP 601 01 9 Godrej Typewriter Hindi Machine No. 988322 01 10. Spare Halogen Bulb 01 10 Godrej Lock 7 liver 01 11. Overhead Projector Trolley 01 11 Harrison lock 04 12. Printer Dot Matric 01 12 Wood chair 06 13. COMAQ Presanio Pro 7500 intel Pentium (computer accessories) 01 13 Wood chair 08 14. Extension Board for computer 01 14 Office chair with plastic cane sheet 05 15. UPS 1 KVA APC Smart UPS model no. SU1000 UXINET M/F No. YSO/28211360 01 15 Wooden armed chair sheet with0 plastic 01 16. HP DJ 840C INK JET printer 01 16 Steel arm chair knitted 01 17. Samsung CD Writer 01 17 Table steel top 1500x900x760mm 01 18. Blank media CD 05 18 Wooden table 1220x750x760mm 01 19. Blank media (predictable CD) 05 19 Wooden Table 4‟x‟2‟x2.5‟ 01 20. Zenith Pentium with computer accessories 01 20 Steel Almirah 1525x 760x 460mm 02 21. Dotmatric Printer Sony make 01 21 Rack wooden 02 22. CVT 1 KVA 01 22 Symphony room cooler 01 23. Sound Card speaker with installation 01 23 Portable leaf area meter cable, conveyor image analyzer cable, 24 pin, 80 column Dot matrix printer manual 01 24. Zenith Pentium with computer accessories 01 24 Soil moisture monitor system 01 25. HP Inkjet Printer 01 25 Infrared thermameter 01 26. CVT 1 KVA 01 26 Tree measuring set and accessories I Tree measuring set and accessories II 1set 27. Photocopier Mx5216 01 27 Analytical balance elect. AA200DS 01 28. Lab Table 7‟x2.5‟x3‟ 02 28 Hero Honda CD 100 motor cycle UP42/6939 01 29. Single Pan Analytical Balance Model K-14 K-ray make 01 29 Single Pan Balance 01 30. Electric Oven 24”x24”x24” Aluminium chamber 01 30 Electric Oven size 24”x24”x24” 01 31. Ph Meter Griph 01 31 pH Meter Griph 01 32. Infrared Moisture Balance 01 32 Infra Red Monitor 01 33. Pocket Calculator 01 33 Pocket Calculator DCM 01 34. Analytical Balance K-ray 01 34 Analytical Balance 01 35. Locks 7 lever Harison make 02 35 SICCO Biochemical Digital Flame 01 36. Remington Standard Typewriter English 20”50.80 cm 01 36 Calcium Filter 01 37. Display Board size 6‟x4‟ 05 37 SICCO YORCO Distillation Unit 01 38. Pharsi Dari 12‟x12‟ 01 38 SICCO YORCOO Hot Plat 02 39. Notice Board Jalidar 4‟x3‟ 01 39 Energy Regulator 02 40. Automatic Slide Projector with Remote Control SUVIRA make 01 40 Steel Spatula 10 41. Pressure Tube 10 mt 10 mt 41 Tree pod stand 12 42. Godrej Coffer Stander 1 pc 42 Wire Guage 12 43. Telephone Lock 02 43 Test Tube stand 12 44. Lock Harison 01 44 Pippet Stand 01 45. Lock Small 01 45 Pestil 04 46. Lock Small 01 46 Bottle Brush 24 47. Lock 01 47 Sprit Lamp 03 48. Vernier Calipers 01 48 Secatier Passi 24 49. Hand Retatry Duster 01 49 Hedge Shear 02 50. Iron Table 3/4 inch +1 inch 01 50 Budding, Grafting Knife 24 51. Iron Stool 125 cm h 18x18 inch 01 51 Pruning Saw 04 52. Calliper digitel 01 52 Bill Hook edge 01 53. Digital moisture meter 01 53 Pruning Dey 02 54. Ravi multimeter 01 54 Loping Shear 02 55. Lab table 7x2.5x3‟ 02 55 Pruning Knife 02 56. Lab stool 2x1.5x1‟ 20 56 Grass Shear 01 57. Single pan analytical K-14 1 57 Sward Lawn 02 58. Perforated board 90x60cm 1 58 Ganesh Head Sprayer 01 59. Electric oven 24”x24”x24” 1 59 Ravi Altimeter 02 60. Ph meter griph 1 60 Ravi multimeter complete in leather case 02 61. Infrared moisture balance advance 1 61 Abneys levels in leather case 02 62. Pocket calculater DCM 1 62 Diameter tape 3meter 10 63. Analytecal balance K- Roy 1 63 Field lens 10xfoalding 02 64. Ravi altimeter complete in leather case 2 64 Bubble spirit level 01 65. Ravi multimeter complete in leather case 2 65 Altimeter Barometric 4500mtrs 01 66. Abneys levelsin leather case 2 66 Lux Meter Digital Range upto 200000 MSW562 02 67. Burette stand 06 67 Top Pan Direct Reading Balance Cap. 1 kg, 5 kg, Spring Balance 100 kg cap 03 68. Sico digital spectro photo meter 01 68 Automatic Slide Projector with Remote Control Model No. MP 410 01 69. Sico Hindustan double distillation appartus 01 69 Extra for Bulb in Timer 01 70. Sico biocamp flame photo meter 01 70 Spare 24 Volt 150 w hylogen lamp 01 71. Sico Yarco kgeldal digestion unit 01 71 Pressure Tube 10m 72. Steel spatula 10nos, tripod stand 12, wire gauge 12, test tube stand12, pipette stand 1, pestil mortar 10cm (4), bottle brush 24, sprit lamp 14 08 72 Plastic Container cap. 35 lit., 10 lit cap. 02 73. Godrej refrigerator 300 lit 01 73 Burette Stand 06 74. Voltage staplaizer 01 74 Office table 48x24x30 with 3 drawl 01 75. Analytical balance 01 75 Steel rack 72”x36‟”x15” 5 shutter 02 76. Soil hydrometer 4 76 VDU Table 36”x24”x20” 02 77. Chemical weight box 50gm physical weight box 200gms 1 77 Tubular chair with arm 04 78. Electrical extention board 3 78 VDU Table 36”x24”x20” 01 79. Stabilizer, vacuum distributor 3 79 Trolly 2 wheel 01 80. Digital PH meter with glass reference electrodes 1 80 Canopy imager Model CI-110 01 81. Lux meter 1 81 Godrej Chair PC 4003.PCH7022 650 mmx 650 mm x 820 mm 02 82. Top pan direct reading 1 82 Godrej Monitor PC3006, Table 750mm(H) x 728 mm (W) x 880 mm (D) 01 83. Lab table 5‟x3‟x3‟ 1 83 Godrej Table PC 3417 610 mm x 445 mm x 750 mm 02 84. Gestetner Rotary duplication model 320 1 84 Voltage Stabilizer 01 85. Getner” Photo micrography equipment 1 85 Soil Hydrometer 04 86. Extra charges above in plywood supplied with standard 1 86 SICCO Hindustan Distillation 01 87. Pocket calculator casio fx 82d 1 87 Digital Direct Reading Conductivity 01 88. Hot Air Oven Model No. YSI 431 Sl. No. 97C1822 1 89. Scientific Calculator CASSIO FX 82TL 1 90. Portable Digital Conductivity Meter 1 91. Spare Condenser for 10 lit. distillation 2 92. Spare Condenser for 5 lit. 1 93. Electric Lamp 3 94. Electric Top Loading Balance Cap. 300 g 1 95. Soil Tensiometer size 90 cm 01 96. Multi Chanel Soil Thermometer 01 97. Probe Length 10 cm, 30 cm, 50 cm, 100 cm 04 98. Deonizer Digital Double Bed 01 99. Analytical weight box 1 mg to 20 gm 01 100. Electric Extension Board 01 101. Portable Digital pH Meter Model No. KI 262(a) 01 102. Metallic Dial Scale Balance 10 kg cap 01 103. Spring Balance cap. 100 kg 01 104. Lab Sink 450x300x150 07 105. Lab Stool 2x1.5x1 fit 40pc 106. Vernier Calipers IME type 05 107. Screw Gage 25 mm 05 108. Water Bath Rectingular size 40x30x10 cm with 12 roles 7.5 cm 01 109. YARCO Instrument Lab Stirrer Mode No. YSI 507 01 110. Kjedal Digestion two distribution combined model 37-121-C 01 111. Glass Part-6 set 01 112. Stop Watch 01 113. SUVIRA Transcope Mode No. MP-340A 01 114. Outdoor use 60x90x3 02 115. Heat Convector apparatus Volt 230 w 02 116. Max. Min. Thermameter 02 117. Dicimal Balance for Direct Reading cap. 3000 gms Model No. AB-D12 01 118. Heating Element 02 119. Plier (Pilas) 01,01, 01,01 01 120. Screw Driver big 01 121. Screw Driver small 01 122. Tester 01 123. 3 Pin Tap 6A 01 124. Frot Dial Plastic Body Balance 5 kg cap. 01 125. Electric Extension Board 16 AMP 01 126. Electric Extension Board 10 x12” 01 set 127. Exhibit Panel 180x120cm 01 128. Heating Mantal cap. 2 lit 01 129. Timber Moisture Meter MSW 544 01 130. Microprocessor based water/Soil Analyser Kit 01 131. ORP Platinum Electrode 01 132. Double Beam UV-V15 Spectrophotometer model SL-160 01 133. Interior Illumination with 3NOS 01 134. Automatic Clyclic Timer 01 135. Multi Magnetic Stirres MAC with Hot Plate cap. 2 lit 01 136. Spectrophotometer Sn. No. 177 01 137. Optical Glass Cuvette 01 138. Tala 10lever 01 139. Heating Element 01 140. Table lamp 01 141. Heating element 02 142. Table Lamp 01 143. Extension Board 01 144. Fourt Dial Plastic Body Tap Pan Balance cap 5kg 01 145. Fourt Dial Plastic Body Tap Pan Balance cap 10kg 01 146. Ajanta Clock 04 147. Scientific Calculator 01 148. Remson Table Lamp with Tube 01 149. Scientific Calculator 01 150. Godrej Chair PC 4003.PCH7022 650 mmx 650 mm x 820 mm 01 151. Godrej Monitor PC3006, Table 750mm(H) x 728 mm (W) x 880 mm (D) 01 152. Godrej Table PC 3417 610 mm x 445 mm x 750 mm 01 153. Developer 1025/5216/5223 01 154. P/REC 1025/5216/5223 01 155. Heating Heater 01 156. Box size 46x28x28 inch 01 157. Revolving Chair 01 158. Table Top Fibre 01 159. Office Table 1200x760x760 mm 2nos 160. Steel Almirah 1980x860x480 mm 01 161. Book Case 1675x840 01 162. Agrosaw Seed Sampling Drier 01 163. Agrosaw Seed Germinator 02 164. Agrosaw Hot Air Oven 01 165. Indosaw Economic Electronic Balance 01 166. Indosaw Intelligent Digital Moisture Testing Machine 01 167. Printer for Above Moisture Testing Machine 01 168. Incubator Model YSI-437 YARCO make 01 169. Enamelled Tray 48pc 170. Scientific Calculator 01 171. Voltage Stabilizer YARCO make 01 172. Scientific Calculator 01 173. LT/LK make starter 01 174. Havells make main switch 01 175. Havells /LT Panel Board 01 176. Rem sem Table lamp 01 177. Scientific Calculator 01 178. Hot air oven YARCO model YSI-430 01 179. Lab Willey Grinder YARCO make model MSW-342 01 1.2. MES Agroforestry 1 Torch (Jeep) 01 - - - - - - 2 Torch with cell (Aveready) 01 3 Torch with 3 cell 01 4 Torch with 3 cell (Jeep) 01 5 Torch with 3 cell (Jeep) 01 6 Hazara 07 7 Hazara with Phuhara 15 8 Hazara with Phuhara 02 9 Kirlosker SV1 Sr.II, 8 HP/1800 RPM with accessories 01 set 10 Sign Board 5x3‟ 01 11 Sign Board 3x1‟ 03 12 Sign Board 6x3‟ 03 13 Sign Board 3x1‟ 04 14 Sign Board 5x3‟, 3x3‟ 01 15 Sign Board 5x3‟ 02 16 Spade TATA 10pc 17 Spade TATA Wooden Handle 25pc 18 Spade TATA 20pc 19 Spade TATA with handle 03pc 20 Spade TATA with handle 22pc 21 Big Khurpa 12pc 22 Khurpa 6pc 23 Khurpa 20pc 24 Khurpi 10pc 25 Tape 30 mt 01 26 Tape 15 mt. 01 27 Tape steel 1 mt 02 28 Tape plastic 30 mt 01 29 Tape steel 01 30 Screw gauge (2.6”) girth 3 sut 05 31 Bark guage 6 cm size 01 32 Spade TATA 50 33 Axes 02 34 Axes 03 35 Balti Suraj make 12” 02 36 Balti 11” 01 37 Balti Iron 10” 01 38 Maruti Foot Sprayer MRI -8/VM3BA 01 39 Garden Cart Singal wheel 01 40 Rich (5 piece) 01 set 41 Screw Rich 300 mm 1 pc 42 Pipe Rinch 1 pc 43 Lalten Champion 02 44 Drum Khali (205 lit. Cap.) 02 45 Container Plastic 35 lit cap and 10 lit cap 2 pc 46 Hasiya 5 pc 47 Kudal 03 pc 48 Lawn Mover 18” TRIMO 1 pc 49 Renti 6 inch 01 50 Renti 6 inch 01 51 Renti 01 52 Sabbal 7 kg 01 53 Torch with Cell 01 54 Torch 3 Cell 01 55 Torch 3 Cell 02 56 Iron Table 3/4 inch +1 inch 01 57 Iron Stool 125 cm h 18x18 inch 01 58 Tyre (118430) 04 59 Thresher Automatic 12 HP 18x30 double wheel hydraulic system with accessories 01 60 Rukhani 01 61 Flinch 4 x 4” 05 62 Nut bolt 5 sut 15 63 Rubber Sheet 4 x 4” 04 64 PVC pipe 4” 01 65 Reflex valve 100 x 100 01 66 Flinch 4” 04 67 Bolt 08 68 Bark gauge 6 cm 01 69 Ravi multimeter 01 70 Ravi altimeter complete in leather case 2 71 Ravi multimeter complete in leather case 2 72 Altimeter Barometric 4500mtrs 1 73 Measuring Tap metallic 15mt. 5 74 Soil thermometer 15cm 2 75 Mettlic tape 10m, 20m,30m 3 76 Secateur passi (4),hedge shear (1) budding Knife (4), bill hook (1), pruning Saw (4), Pruning Dey (2), loopping share (2), pruning knife (2), Grass shear (1), sword (2), Ganesh hand sprayer 11 77 Secateur passi 20 78 Sabbal 7kg 01 79 Khurpa big size 07 80 Khurpa small size 07 81 Tape plastic 01 82 Tape steel 01 83 Spade TATA with handle 03 84 Keel big size 08 85 Enameled Tray size 46x30 cm 38pc 86 3‟x2‟ size board sq fit 01 87 16 gage Chadar with hazara 40Nos 88 Sign Board 4x3 inch 01 89 Spade TATA 04 90 Kudal 01 91 Khurpi 05 92 Gainti 10 93 Metalic Tape 30 mt 02 94 3‟x2‟ size board sq fit 01 95 16 gage Chadar with hazara 43Nos 96 4‟x3‟x9‟ size board sq fit 01 97 Spade 04 98 Kudal 01 99 Khurpi 03 100 3‟x2‟ size board sq fit 01 101 16 gage Chadar with hazara 45Nos 102 Iron chhadar 55pc 103 4‟x3‟x9‟ size board sq fit 01 104 Hazara 10lt with fuhara 02 105 Fawda 04 106 Khurpi 05 107 3‟x2‟ size board sq fit 01 109 16 gage Chadar with hazara 30Nos 109 Bandar chhap balti 12” 04 110 10 Lt Hazara with Fuhara 02 111 Shakti power tillor 130 DI model 01 112 Hitesh Barket Assembly 01 113 Tail Wheel flat 01 114 Wheel Changer 01 115 Lugged Wheel 01 1.3. MES Horticulture Fruit Science 1 Sanyo PLCXU -40 (Sanyo LCD Multimedia projector) Model no. SANYO PLCXU -40 with short zoom lens serial no.G -3805494 2000 ANSILM XGA1024X768 resolution 01 1 Tula man balance Cap.0 -1kg model 40 AP ,MC no 7511043 01 - - - 2 BOD Incubator (automatic)TANCO make model PLT -141 size 610x450x410mm cap4 CUFF Alum Chamber 01 2 Tula man balance Cap.0 -1kg model 41SM ,MC no 7912089 01 3 Macro equipment Digital electric top loading balance cat no. 908 cap.100gm LC 0.005g 01 3 Weight box for chainometric 01 4 Seed Storage cabinet “MAC” 72”x30”x14” cat no. MSW 475 30 trays 01 4 Plant grinder (willy mill) 20mm 01 5 Handy cam video camera model 418E sony 01 5 Hot plate 0 -100 0C size -HP - 3 -SHC Sr.no. 54678 01 6 Servel voltage stabilizer 5KVA wider range automatic & auto cut 01 6 Microscope wes -was Optic model 20660 01 7 Exhibits panel board outdoor size 180x90 cm.codeno.RD -116 -03 02 7 Metallic stand for water distillation with cord and plug 01 8 Projection screen tripod model size 150x150cm code no.RD -207 -03 01 8 Pair of tongs 6” 01 9 Over head projector trolley code no.RD 201 -02 01 9 Wood microtome (incomplete) 01 10 Exhibits panel board outdoor size 180x90 cm.codeno.RD -116 -03 02 10 Hot air Oven electrical size 300x300x300mm AJE 01 11 Perforated board 150x90 cm RD -115 - 0 01 11 Water bath size 24”x12”x12” S 35 0 F Sr. no. 65 01 12 Media sterilization system MSW -101 01 12 Digital pH MAC model MSW 552 with pH range 0 -14 0.01 with automatic temperature controller 01 13 Voltage stabilizer automatic model MAC MSW 582 cap.1KVA 01 13 Digital conductivity MAC model MSW 555 range 0 -200 micro with dust cover and stand 01 14 Water still double walled cap.4 litre/hr. load 3.0KW MSW 197 01 14 Digital photo-electric calorimeter 8 filter model MAC MSW 557 wavelength 400- 680mm cavelles photocell detector with voltage stabilizer automatic model MAC MSW 500 cap.1KVA 01 15 Water still double walled cap.10litre/hr. load 5.0KW MSW 197d 01 15 Media sterilization system (auto clave) 01 16 Flame photometer without automatic ignition cat. No. CL361 Elico optional accesseories calcium fitter for above 01 16 Moisture box aluminium cap.250gm for soil 404 17 Seed germinator size 555x605x910mm cap 308lit. MAC(MSW 123)SS Automatic 0-24 hrs timer for regulating illumination cycle 01 18 Kjeldhal digestion unit micro processor based digital temperature indicator cum controller cat MSW437 01 19 Seed germinator(dual chamber) MAC microprocessor controlled with automatic stabilizer inside chamber size 555x605x910 mm SSMSW124b 01 20 BOD Incubator low temperature MAC microprocessor controlled with automatic stabilizer MSW 121C 505x415x830 mm 01 21 Plant growth chamber MAC micro-processor controlled with automatic stabilizer MSW 130 A size 570x875x555 mm 01 22 Auto clave vertical MAC size 305x550mm cap.50 lit. MSW 101(DX) 01 23 Seed storage cabinet sonar 27”x30”x14” cat no. SSC-10 AC 01 24 UPS 100VA PC smart UPS model SOA 1000Ux1 with rocket SMF battery for 30 min. backup time 01 25 26 Ah Exide power safe SMF battery model EP-26-12 03 26 Water purification unit (miliQ) BM9EN1105A 01 27 Microprocessor universal cooling camfuage cat no.CPR-30 A)Rotor head cat no.C-230 B) Voltage stabilizer VS-03 01 01 01 28 Aapurti and fixing iron sheet 18 gaze sixe 3.2 and 8 feet lamba angle iron sahit board 03 29 PC based automatic absorption spectrophotometer 01 double beam with compressor with three hollow cathode lamp to set RS232 interface background corrector with automatic gas box with auto flame alignment spectro analytical make SA1304 30 Regulator N2O 01 31 Regulator Acetylene 01 32 N2O burner 01 33 Backfire arrestor 01 34 PC PIU Branded 01 35 Printer compatible 01 36 Acetylene gas filled cylinder including cylinder cost 01 37 42 AH Exide power safe SMF battery model EP-42-12 03 38 Laminar Air Flow (Horizontal) with S.S. work RH58-07 size 120x60x60cm 01 39 HP Desktop computer 2000 series as per RC sl.no. 1NA912078 01 40 pH Meter systronic type-362 with glass electrode sr.no.009 1 set 41 Elico digital pH meter model L1-120 with electrodes sr.no.P7950 01 41 Elico soil Bridge type CM 84 with electrodes sr. C4151 01 42 Digital Spectrophotometer systronics type 106 sr no. 2640 01 43 Autoclave vertical size 250x450mm Y.ST.-402 sr no. 288 01 44 Analytical balance model KEROY sr.no. 5558 01 45 Chaino metric balance K-8A05620 (KEROY make) cap.9.210gm 01 46 Chaino metric balance (KEROY make) HC-21141 cap.9.10gm 01 47 Top Pan balance electrical type 75201 ELN no.13862212 01 48 Top Pan balance Avon make Cap.500gm sr.no. 542 01 49 Decimal triple beam balance reading 3000gm model ABD11 Avon make Cap.3.110kg 01 50 Digital conductivity meter model -304 Systronics sr.no. 407 01 51 Digital conductivity meter model -304 Systronics sr.no. 864 01 52 Plant grinder (willy mill) Chamber size 40x20mm with motor 0.25 HP Sr. no. 5877 01 53 Laboratory heating plate 30x45x15 cm 2KW Khera 01 54 Klettsumerson Photo electric calorimeter S.no.44154 with blue and green fitter 01 55 Digestion distillation assembly model K.J.121 AJE make 01 56 Rotatory microtome model1090 01 57 Universal Oven electrical memmerty type size 455x465x432mm model YSI 432 york 01 58 YARCO equipments Hot air Oven (memmert type) size 605 x605x605mm stainless steel cat no. YSI931 S.no.9701815 01 59 Plani meter 01 60 Hand refractometer 0-32% Erima Japan 15163 01 61 Hand refractometer 58-92% Erima Japan No.21 01 62 Hand refractometer 0-32% Erima Japan 02 63 Spirit lamp 01 64 Systronics Extraction unit for six test fitted with regulator sr.no. 3189 01 65 Sieve 20,40,60 mesh 02 66 Water distillation apparatus stand monesty type W.D. 50 01 67 Soil Thermometer 12” long 01 68 Soil Thermometer 18” long 01 69 Soil augar screw type 50mm 01 70 A.I.C. tensiometer 6” length 12” length 24” length Tube augar Soil Moisture metre Leather case Gypsum black with 1 meter lead wire 01 01 01 01 01 01 01 71 Screw Guage 25mm 01 72 Screw Guage 50mm 01 73 Vernier Calipers 05 74 Vernier calipers Super 01 75 Tele counter 01 76 Sambross Servo Controlled voltage stabilizer type SS 102 with over voltage under voltage cut out sr.no. 022 (2 KVA) 01 77 Servo Controlled voltage stabilizer cap.3 KVA 02 78 Water bath size 250x125x125mm YSI 413 01 minisizeYARCO 79 Centrifuge Model R-23 REMI sr.no. C06/300 01 80 Gas Generator for flame photometer (Khera) 01 81 Lux meter 50K LX-101 L-275182 01 82 Vaccum pump with 1.5 H.P.motor (Khera make) 01 83 Godrej Refrigerator cap.300lit. with stabilizer 0.5 KVA 01 84 Moisture box cap.250gm for soil sample 99 85 Rapid moisturemeter 0-50% with wet weight cat no. MB293 01 86 YARCO Shaking machine with covered body fixed speed fitted with timer model YSI516 01 87 YARCO Laboratory mill(villy type)0.5HP YSI 527 01 88 Bacteriological Incubator (TANCO) memmer type model PLT-136-INC-5 stainless steel size 600x600x600mm extra air circulation fan 01 89 Measuring tape 30mtr. 01 90 YARCO B.O.D. Incubator model YSI-440 size 565x865x550mm Optional accessories a. Voltage stabilizer 3.00KVA b. Interior illumination with 3 Nos. fluorescent tube 60m 01 01 01 91 TANCO B.O.D. Incubator (automatic TANCO make model PLT 141 Size 610x450x410mm cap.4 caftaluminium chamber 01 92 Seed storage cabinet „MAC‟ cabinet size 72”x30”x14” (approx.) cat no.MSW 475 30 trays 01 93 Macro equipment Digital electronic top loading balance Cat no.908 L.C. 0.005gm 01 94 Poly pouch sealing machine MAC model 24 pedastal model cat no. MSW-665 01 95 U.V. Radiation seed viewing cabinet MAC make app. Outer size 24”x24” cat no. 508 01 1.5. Veg. Science 1. Darati 05 1. Analytical balance Siughl Park-12 01 - - - 2. Sickle 10 2. Auto mix Remi Make 01 3. Banka 01 3. Analytical weight Box 01 4. Power Tiller 01 4. Automatic Pipette washer 01 5. Five time cultivator 01 5. BOD Ineubater 02 6. Trolley with Jeep tyre 01 6. Burette Stand with clamp 03 7. Logged Wheel 01 7. Bearranges Balance caps Kg. 01 8. Furrower 01 8. China matric balance K -8A Kamidas 01 9. Wheel Charger 01 9. Crossing Kit 05 10. Pully for haular 01 10. Digital Flame photometers 01 11. Mould board Plough 01 11. D.C.M Calculator + Desk Calculator 02 12. Hitech Bracket 01 12. Digital Conductivity meter 01 13. Flat Engine Pully 01 13. Heating mental cap2000ml+500ml 02 14. Seed bin 3 Qt 01 14. Dissecting microscope 06 15. Angle Iron 18 15. Elico Spectro photometer 01 16. Petromax 01 16. Epidias cope Getner Projector both 01 17. Lock 01 17. Electric boiler 01 18. Lock 01 18. Gange meter 02 19. Lock 01 19. Hot air oven 03 20. Lock 07 20. Hand Refractometer 02 21. Heat Convector 02 21. Hygrometer 01 22. Calculator 03 22. Hot Plate 02 23. Spade with Handle 20 23. SEW micro Kgeldal appratus 02 24. Measuring tape 02 24. Leonard &All win refrigerator 02 25. Steel Box 02 25. Laboratory vacuum Pump 01 26. Steel box 01 26. Micro Kjelhal D -apparatus 01 27. Steel box 02 27. Maximum Munimum thermameters 01 28. Steel Bokhari 5 Qt 02 28. Non Refrigerated Centrifuge 01 29. Steel Bokhari 3 Qt. 02 29. Oscar Binacular microscope 01 30. Steel Bokhari 2Qt. 01 30. Pocket calculator 02 31. Balance cast iron Wt. 10 kg 01 31. Physical weight box 01 32. Seed bin 2Qt 02 32. Salter spring balance 1 Kg.to 10 Kg 02 33. Plateform Balance with 100 to 10 kg weights 01 33. Sterio binocular microscope 01 34. Grass cutting Talwar 02 34. Sunmica Cap table 07 35. Gator Rockey Sprayer 01 35. Tri Pod Stand 06 36. Bearanger Balance cap 5 kg with weight 05 36. Tongue Stainless steel 01 37. Balance circular 02 37. Tripole Beam Balance 01 38. Maruti Foot Sprayer 03 38. Tensio meter 6,12 & 18 (4+4+4) 12 39. Maruti Foot Sprayer 01 39. Universal Moisture meter 01 40. Torch with 3cells 01 40. Voltage Stabilizer 01 41. Torch with cells 01 41. Wesiox microscope Lamp 01 42. Torch with cells 02 42. Water Steel 01 43. Steel table 07 43. Willey mill 01 44. Seed bin 5 kg 03 44. Water Bath 01 45. Seed bin 2.5 kg 03 45. Soil auger Post Hole 01 46. Official Armed wooden chair 10 46. Soil auger Scrow type 01 47. Hero Honda Cd 100ss 01 47. Steel Soil Auger 01 48. Lab Stool 2x1.5x1.5 06 48. Soil Sample Box 150 49. Mango rack wooden 01 49. Soil therma meter.6‟‟12‟‟& 18‟‟(3+3+3) 09 50. Katedar Patta 01 50. Shot beam balance 01 51. Kudal 10 51. Standard Analytical weight box 01 52. Hazara 02 52. Screen Projector 150×120cm with stand 01 53. Spade 10 53. Slide Projector & Slide carrier 01 54. Khurpi 10 54. Sam brass Portable gas generator 01 55. Hasiya 12 55. Sam brass horizontal shaker 01 56. Steel Trunk 01 56. Sew Magnetic stirrer 02 57. Maruti foot sprayer 03 57. Muffle Furnace 01 58. Tripoline 02 58. Water distillation apparatus 01 59. Aspe Power Sprayer 01 59. San brass stabilizer 01 60. Digita Lop peati from magnatic scale cap. 150 kg ( Macro) Balance 01 60. Extension board 01 61. Lock 03 61. D.C.M. Solar Desk Calculator 01 62. Kudal with wooden bet 06 62. Official chair 02 63. Khurpi 06 63. Official Maize 01 64. Phawara with wooden bet 04 64. Official wooden chair 02 65. Maruti foot sprayer 01 65. Steel officer Ex. Table Sunmica top 01 66. Hazara 02 66. Remington type machine English 01 67. Counter Scale with weight 01 67. Official Maize Sunmica Top 01 68. Power sprayer Aspee Bolomat rised Sprayer 01 68. Computer, Monitor, Keyboard, Mouse, U.P.S., Printer & C.P.U 1 set 69. Aspee Bolomat oriseed cum duster 01 70. Counter scale 20 kg cap. with weight 10 -50 01 71. Kudal 10 72. Phawara 10 73. Khurpi 05 74. Kudal 10 75. Khurpi 10 76. Hasiya 10 77. Phawara with wooden bet 10 78. Maruti foot sprayer 01 79. Ganesh Hand sprayer 01 80. Hand trailer manually operated 01 81. Pen Drive 02 82. Calculator 02 83. Tripoline 20x14 14x115 03 84. Calculator orpat 02 85. Kudal 06 86. Canon Power shot TS 95 Camera 01 87. Maruti hand sprayer 3 lit. 01 88. Phawada 10 89. Kudal 10 90. Khurpi 10 91. Spec Hand Sprayer 3 lit 01 92. Phawada 04 93. Phawada 10 94. Kudal 10 95. Yarco Incubater 01 96. NP-Based Flame photometer+Printer 2+2 97. Hot air oven 01 98. Hot air oven 01 99. Hand Refractometer 01 100. Hand Refractometer 03 101. Hygro meters 01 102. Whirlpool Refrigerator + stabilizer 01 103. Stabilizer Allivin 15 KVA 01 104. Voltage Stabilizer 15 KVA 01 105. Lab willey mill 01 106. Water bath 01 107. Sarvo Stabilizer 5 KVA 01 108. Vernier Callipers 04 109. Diel Vernier callipers 01 110. Pane balance cop. 1 to 2 Kg. 01 111. Weight box in wooden (cap 1 kg) 01 112. Ganesh hand sprayer 01 113. Stove 01 114. Bhagona with cover, Stealness steal slit cap 01 115. Knifer 12 116. Spoon 12 117. Forks 12 118. Chips cutter 02 119. Bhagona Aluminium with cover 02 120. Nova gas with Burner 01 121. Revaling Stool 15 122. Crown Carking Machine 01 123. Extension board 01 124. Extension board 01 125. Test tube Stand (72 tuber) 01 126. Mixes cum juices 01 127. Heating Mental cap 2 litr 02 128. Water Filter 01 129. Over Head Projector with stand 01 130. Hot Plate 01 131. Magnifying Lenss4”dia& 2”dia 04 132. Forceps fine 12 133. Top Pan Balance 01 134. Autolave Model AC-101 01 135. Getner Microscope 01 136. Lock NavTal 01 137. Rado 10 Liver 01 138. Rado 10 Liver 02 139. Devimal Balance 01 140. Medico Centrifuge Machine 01 141. Slide Cabinet 01 142. Pan Balance with Weight 1Kg 01 143. Hot Plate Coil Type 02 144. Analegue Conductivity Meter 01 145. Disc Electrophotesis apparatus 01 146. KjeldnalDistilation apparatus 01 147. Ph-Meter 01 148. Getnor photomicrography equipment 01 149. Standard Camera Lence for retino photo graphy 01 150. Pasturisation Bleaching Tank 01 151. Mufflle Furnace 01 152. W.T.C Deionises 01 153. Yarco Lux meter 01 154. Lab Heating Plate 01 155. Osaw Universal Masture meter 01 156. AT.CO. Electric Balance 02 157. Phone tonica 01 158. Soxter app. With heating mental 01 159. Extension app. 200ml Flask 06 160. Heating Mental cap,100ml,250ml, 100ml. 2000ml (3+3+3+3) 12 161. Hot air oven 01 162. Digital tap Loading Balance 01 163. Hot Air Oven 01 164. Digital Electric top loading balance 01 165. Plane Paper Copies 01 166. Whirlpool Refrigerator 310 litr 01 167. HP Scan Jet 01 168. Lab Stool 20 No +10 No 30 169. Exhibit Panel for outdoor size 01 170. White board 01 171. Calculator 01 172. Spring Balance 20Kg. Cap 01 173. IBM Nest Vista Computer 01 set 174. Portable Loose Steel yard Type balance (250Kg) 01 175. TUS Start U.P.S 01 176. Sharp Aj 800 colour Printer 01 177. Digital top loading balance 01 178. Godrej Refrigerator cap (300ltr) 01 179. Rakmi lock 7 Liver 03 180. U.P.S (AFC) 01 181. RD -116 -03 -Display Board 02 182. Tray dies (seed driver) 01 183. Seed Cabinet Form 03 184. Seed Cabinet Form 02 185. (1) B.O.D In cabateryorea 01 186. (2) Fluaescaltubeni 01 1.6 . MES Veg. Science 1. Rotavator Tractor Machine 01 - - - 1 Steel Almirah 4Nos 2. Terracer Blade 01 2 Grain bin 12Nos 3. Offset Disk Harrow 01 3 Maruti foot Sprayer 2Nos 4. Tractor Messi Forgussan with all instruments 01 4 Orient Hand Duster 1Nos 5. Bag clear Rebo Model DAR machine Sealing Machine 01 5 Torch 5Nos 6 Drum (200 lt cap.) 2Nos 7 Jack (5to10 tons) 1set 8 Stool wooden 6Nos 9 Iron plates 1500 Nos 10 Watering Cane 6 Nos 11 Weight of Iron 18Nos 12 Hasiya 6Nos 13 Steel Box 6Nos 14 Canester Tin 14Nos 15 Table 2Nos 16 PTO Pully 1Nos 17 Wooden Structure Self 2Nos 18 Laltain 1Nos 19 Sealer 1Nos 20 Chair Wooden 3Nos 21 House Pipe 60m 22 Spring Balance (10 kg cap) 2Nos 23 Balance Wooden Structure 1set 24 Network Component 4Nos 25 Maruti Hand Sprayer 1Nos 26 Lock 10Nos 27 Display Board with Stand 3Nos 28 Pump of diesel 1Nos 29 Measuring Cane (5lit cap) 1Nos 30 Measuring Cane (10 lit cap) 1Nos 31 Room Heater 1Nos 32 Weight Box 1Nos 33 Nap sac Sprayer 1Nos 34 Circular Hanging Balance 2Nos 35 Balance Plate (glass body) 1Nos 36 Galaicha (carpet) 1Nos 37 Sabbal Iron 1Nos 38 Iron Top (tasla) 5Nos 39 Kudal 27Nos 40 Spade (ordinary) 67Nos 41 Spade (TATA) 15Nos 42 Khurpa and Khurpi 62Nos 43 Axe 5Nos 44 Bucket Iron 7Nos 45 Ganesh Hand Sprayer 2Nos 46 Fan 4Nos 47 Plastic Drum 4Nos 48 Check Valve 1Nos 49 C. I band 1Nos 50 Flench 1Nos 51 Pan Balance 2Nos 52 Frant Dail Balance Top Balance 3Nos 53 Palastic Hand Sprayer 1Nos 54 Drum 1Nos 55 Cycle Hind 1Nos 56 Type Writer (Hand) Remington No 625576 1 Nos 57 Tripal 4 Nos 58 Book Self(Wooden) 2 Nos 59 Lock 4Nos 60 Hedge Shear 1 Nos 61 Plas (iron) 1 Nos 62 Punch 1 Nos 63 Steplar 1 Nos 64 Screw rinch 1 Nos 65 Nose Player 1 Nos 66 Chheni 1 Nos 67 Hammer 1 Nos 68 Dirbily 2 Nos 69 Penchcas 1 Nos 70 Reti 2 Nos 71 Tractor engine No 12526 Chasis No 002252 1Nos 72 Tractor Trolly 1Nos 73 Screper 1Nos 74 Disc Harrow 1Nos 75 Cultivator 2 Nos 76 Rickshaw 1Nos 77 Table 3Nos 78 Wooden Structure Self 5Nos 79 Diesel Engine 2Nos 80 Chair Wooden 5Nos 81 Cage Wheel 1 Set 82 Ridger (3 Farrow) 1Nos 83 Hand Pump 1Nos 84 Structure Iron 84Nos 85 Hand Cart 1Nos 86 Table Lab (wooden) 1Nos 87 Disc Plough 1Nos 1.7 . College Administration 1 - Resograph Automatic Master Printer K58001 01 No. 1 - Water Cooler 02 Nos. - - - 2 - Digital Copier/Laser Printer 01 No. 2 - Induction Verner 01 No. 3 - Vacum Cleaner Erodean Acc Model 01 No. 3 - Chair Steel 17 Nos. 4 - Sharp Fax FO 650 Machine 01 No. 4 - Power Inverter 01 No. 1.8 . Land Scape 1.9. Medicinal & Aromatic Plant 1. Pocket Refractometer 01 - - - - - - 2. Electronic top pan balance Model LCB -4B 150 g capacity K -Roy make 01 3. Villey grinder inner chamber, blades 40x25 mm Khera make Model KJ -110 (a) 01 4. Juicer cum grinder (Fisher) cap 1.0 litre 01 5. Semi Micro balance Sortorius Model -2004 01 6. Decimal balance Triple beam cap. 3kg Avon 01 7. Triple beam balance cap 0.111g 01 8. Borer set 01 9. Steel cork borer set 01 10. High speed centrifuge type C-24 Remi 01 11. Centrifuge medico Remi 01 12. Chromatography drier 01 13. Thin layer chromatography kit 01 14. IEC-222 Descicator cabinet of thick guage alluminium stand glass door 01 15. Indian Two bed portable Deionizer model C-A- 20 IU 01 16. Sambrass portable gas generator type-12 with burner 01 17. Glass cutter Kohinoor 01 18. Grinding mill (Villey mill type) 100 mm Yorco 01 19. Heating mantle with energy regulator capacity 5000 ml 1000 ml 500 ml 250 ml 100 ml 50 ml 05 02 02 02 02 02 20. Laboratory heating plate with regulator size 45x60 cm 02 21. Hot plate electric(CICE) round size 12” dia. 01 22. Knife steel 02 23. Micro kjeldoll stand (prequel type) 02 24. Lock 01 25. Lock 01 26. Pump plier 01 27. Screw driver 01 28. Muffle furnace MIC make size 12x6x6 01 29. Melting point apparatus with cooling plug 01 30. Moisture meter optics 01 31. Chromatography oven front opening 650x650x600mm 01 32. Sew make oven vacuum size dia. 300x300 mm 01 33. Systronics griph pH meter portable battery operated 01 34. Flame photometer (Systronics) with spare parts- Burner unit ; Galvanometer ; Compressor Each 01 35. Research Polorimeter- Getnor SP-02 01 36. Leonard refrigerator cap. 286 lit. 01 37. Rotary vacuum flask evaporator-Toshniwal 01 38. Abbo type refractometer 01 39. Burrett stand (iron) without clip 02 40. Tripod stand small size long size 04 02 41. Stand & clamp iron AJE make 10 42. Stand for clavenger apparatus 04 43. Flask shaker for 04 flasks AJE 01 44. Reciprocating shaker 01 45. Sand bath electrically heated double walled 01 46. Spectronic-20 Bush & Lomb model USA 01 47. Spatula stainless steel 05 48. Spatula stainless steel Big Small 03 02 49. Scissor stainless steel 03 50. Remi make medium duty stirrer with1/2 HP motor model R.O.1240 01 51. Magnetic stirrer with hot plate cap 2 lit. 01 52. Stop watch 01 53. Soil spoon set 01 54. Temperature control unit with energy regulator MIC make 01 55. Voltage stabilizer 5kva Khera 01 56. Weight box 01 57. Paraffin embedding water bath cooper 01 58. Water bath cylindrical 25x20 cm 01 59. Water bath cylindrical 25x15 cm 01 60. Water bath rectangular 25x35x10 with 6 hole 7.5cm dia. 01 61. Lock Harison lock Prince 01 01 62. Heating mentle cap. 5 lit. Tanco make PLT 165 02 63. Heating mentle cap. 10 lit. Tanco make 01 64. Enamel trey 8”x6” 12”x10” 18”x12” 05 05 04 65. Lab table size 5′x2.5′x3′ (sun mica top) Lab table 5′x2.5′x3′ (ply top) 02 02 66. Chromatography cabinet wooden size 600x600x300 mm 825x825x225 mm 01 01 67. Flask stand seesham wood 04 68. Lab table Sun mica top with rack 7′x2.5′x3′ 02 69. Stool revolving 18”x12”x12” 04 70. Office chair rectangular pipe 01 71. Physical balance Avon make 01 72. Physical weight box 01 73. Single pan balance model K -14 KRoy make 01 74. Stabilizer 1.0 kva sagar make 01 75. Mixer cum grinder cap 1.0 lit. 01 76. Autoclave vertical 250x450 mm 01 77. Hot plate electric CICE round size 12″ dia. 01 78. Cintex heating mantle cap 2.0 lit. 02 79. Laboratory stool with sun mica top 03 80. Tinocular microscope with accessories model METZ779A 01 set 81. Leetz base slide microtone 1400 with flooring 01 82. Sprit lamp 01 83. Wooden hood show case size 2′x1.5′x2.5′ glass covering 01 84. Glass equipment wet & dry thermometer 01 85. Emergency light with battery 01 86. Scientific calculator 01 87. Maruti foot sprayer 01 88. Hazara 04 2. College of Fisheries 2.1 College of Fisheries Farm 1. Almira Steel size 1525×760×460mm 01 - - - - - - 2. Wooden Table Sunmica Top size 4×2×2.5 01 3. Laboratory Table Wooden Top Sunmica 01 4. Chair Arms Wooden 02 5. Chair Teak Wooden Arms 01 6. C.M.C.Chair Revolving 01 7. Chair Wooden Officer 01 8. Calculator 01 9. Iron Box size 4×2.25×2.5 01 10. Tulaman Balance 5kg Cap. 01 11. Tarch Three Cell 01 12. Centrifugal Machine Han Driven Four tube 01 13. Chair Wooden (Teak)Officer 01 14. Chair Officer Teak Wooden 01 15. Chair Arms 03 07 16. Table Steel size1220×760×760mm. 01 17. Table Wooden 4×2×2.5 01 18. Black Board Tigodiya Size6×2×1.5 01 19. Wall Watch (Quartz) 01 20. Almirah Steel size 1525×760×460mm. 01 21. Air Cooler,Symphony 01 22. Dissecting Stand Wooden 02 23. Air Compressor withoutBatery. 01 24. Refrigerator (Godrej) 01 25. Stablizer 01 26. Stablizer Vilex 01 27. Stablizer Stand 01 28. Stapler Small 02 29. Oxygen Gass Cylinder with Regulator 01 30. Pond Aretor 1.2H.P. 01 31. Stool Wooden size 1.5×2.5×1 01 32. Heater 02 33. White Borad size 120×120cm. 01 34. Exibites Pannel for Indoor use size 120×60cm. 01 35. U.P.S.Battery 01 36. Computer Simence 01 37. Scan jet H.P.2300C 01 38. H.P.Inkjet Printer Model SS50 01 39. Wooden Board (deptt.) Size2×1.5 01 40. Pulli 01 41. Lineva Think Desk top Computer 01 42. Spectro Calorimeter 01 43. Streching plate 01 44. Heatingh mental 01 45. Dissolve Oxygen Meter 01 46. Portable Digital ph meter 01 47. Digital Nephelo -Terbidity Meter 01 48. Hot plate 01 49. Slide Projecter 01 50. Type Riter Hindi 01 51. Type Riter English 01 52. Lejar printer colour hp 01 53. White Board 120×120cm. 01 54. Exhibit panel size120×60cm 01 55 Fawada 2 56 Torch Everready Three cell 1 57 Injan Kriloskar 8 H.P.with Assosries 1 58 Trolly Iron 1 59 Khurpi 1 60 Hansiya 1 61 Motar Strater 7.5H.P. 1 62 Kriloskar Pump HWAD100MMFLP 1 63 Plankton net 1 64 Kriloskar Electric Moter 3 Phase 7.5 H.P. 1 65 Main swith 32 AM. 1 66 Moter Stratar 1 3. Directorate of Research photocopier machine 4. D.W.P 1. Steel Almirah Big Size 1 No. - - - 2- e stfjax V si 15 eh0 01 2. M. S. Conduit pipe ¾ 215 Nos. 3- e stfjax V si 03 eh0 01 3. Damage old high level cistern 25 Nos. 4- :e dwyj dsu0LVkj e sd 01 4. G.I. Hooks 3 Bag 5- QksVks dkfi;j ekMy ,p0ih0 420 01 5. C. I. Pipe 3 & 2 ɸ 6´ long 18 Nos. 6- CY;w fizUV e‛khu 01 6. CI Tee 4 size 30 Nos. 7- vksYM Mªe 04 7. C I Bend 4 size 15 Nos. 8- pSu fVfdy 01 8. C I Cowel 4 25 Nos. 9- ,DlkbM cSV ªh 08 9. Old Main Switch 30 Nos. 10- dEI;wVj ,p0lh0,y0 vksYM ekMy 01 10. Old Starter 4 Nos. 11- Q SDl e‛khu 01 11. Old 63 kVA Gen set with Radiater 1 No. 12. Old NRV 6 size 1 No. 13. Scrap C 1 (Sanitary) L. S. 14. Scrap G 1 (Water Supply) L. S. 15. M. S. Pipe 4 Damage 15 Nos. 16. Scrap M. S. Angle pieces L. S. 17. Diesel Tank 200 Lts. old 1 No. 18. Old PVC Scrap L. S. 19. CID Joint 6 size 15 pair 20. Air cooler without fan 4 Nos. 21. Sodium Light fitting 100 Nos. 22. Genset 15 kVA 01 No. 23. Inverter Old Model 1600 VA 01 No. 24. 7.5 K.V.A. Gense . Sports 1 Allgro Cycle 02 1 Chair Wooden 10 - - - 2 Basket Pole with board 1.30mt.x1.2mt. 01 set 2 Score Board Cricket 01 3 Basket Ball Board Ply 01 set 3 Score Board VolleyBall 01 4 Body Boom 02 4 Score Board Foot Ball 01 5 Back - Hiper 01 5 Score Board Hockey 01 6 Cycle Hero 01 6 Almirah Big 01 7 Climbing Stand 01 7 Parallettes Bar 01 8 Clock 01 8 Aeroline Mini Stopper 01 9 Duplex Twist Machine GYM 01 9 Almirah Small 01 10 Dumbles 02 pc 10 Plcetic Chaur 03 11 Dumbles 04 pc 12 Foot Ball Pole 01 set 13 Fabara ¼ QkSvkjk ½ 03 02 14 Khurpa 04 07 15 Hasiya 02 16 Daroti 01 17 Leg Ext Machine 01 18 Multi Hyper 01 19 Bonch Machine 01 20 Hand Cart Pipe 01 21 Stop Watch 03 22 Hammer 16lb 01 01 8lb 01 23 Hammer 12 lb;16lb 01 01 24 Hurdles 30 25 Hurdles 54 10 26 Hand Ball Pole 01 set 27 Hockey Goal Board 01 set 28 Hand cart 01 29 Hazara 02 30 Locks 02 05 01 31 Locks 01 32 Leg Press Machine 01 33 Line Marking Machine 01 34 Casttle amplifire 01 35 Horn Ahiye 02 36 Lunit Driver 02 37 Microphone 02 38 Microphone 01 39 Sound Colum 02 40 Microphone Stand 02 41 Microphone GTP 01 42 100 mire 100 mt 43 One Are 01 44 One Ballog 01 45 Cassettes 06 46 Extension 01 47 Petro Max 01 (2kg) 48 Biven Back 01 ladies 01 Gents 49 Calculator 01 50 Sector 02 51 Stop Watch Table 01 01 52 Starting Block 02 03 53 Basket Board 1.84x1.22 ply 02 pcs 54 Basket Board ply 04 55 Basket Ball 6” Steel Pipe with ring 01 set 56 Basket Ball Board Fibre 01 set 57 Exercise G202 01 58 Power Mistri functional Shocket 01 59 Jogger 01 60 Power Steeper 01 61 Vibretor Massager Sharp 01 62 Multi Gym Station 01 63 Foot Massager 01 64 Twister 01 7 Hospital 7.1. Hospital (A) scrap 8. College of Home Science 8.1. Home science (Dean Ofc) 1. Zerox W.C. Pro 420 Copier 01 - - - - - - 2. Digital Photo Copier Toshiba ES -163 01 3. Zerox photo Copier 5821 -IV 01 4. Calculator 03 5. Digital Multifunction fax 01 6. Godrej Chair CH -4012 With Desk 11 7. Calculator 02 8. Hindi Manual Type writer 01 9. Calculator 01 8.2. Centrel Store (Dean Ofc) 1. Chair Wooden Armetic 01 2. Chair Wooden Armetic 02 3. Chair Wooden Armetic 05 4. Student Chair Wooden 40 5. English Type Writer 01 6. By Language Type Writer 01 7. Mestetner Duplicating machine 01 8. Canon Plus Paper Copier Machine 01 8.3. Textile & Appareal Designing 1. Hot Plate 01 2. Swing Machine Wooden Box Cover 01 3. Press Table 02 4. USHA Sewing Machine Wooden Cover 03 5. Physical Balance 02 6. Thread Box Fiber 01 7. Threader 01 8. Stove 01 9. Patila With Lid 01 10. Single Pan Balance K-14 super 2 K.G 01 8.4 Family Resource Management& Consumer Science 1. Press 2 2. Scissors big 2 3. Scissors small 2 4. Emergency light (ORPAT) 1 5. Remson O.T.G. 1 6. Victimizers model vis-512 1 7. Softel ice cream machine 1 8. Zirob filter 1 9. Domestic flour mill complete unit 1 10. Stabilizer vucum-4 1 11. Stabilizer veelex 110 to 290 1 12. Teaching and documentary education C.D. 1 13. Video recording documentary education C.D. 1 14. Pedelite C.D. SENSORS 3 15. Bajaj water filter 1 16. Montal 1 17. Refrigerator godrej 300 LIT. 1 18. Godrej Refrigerator 165 lit. 1 19. Stabilizer 0.5 KVA 1 20. Towelstand 1 21. Dressing table with glass 3 1 22. Deewan size 6‟x3‟ sunmica posted with box 1 23. Folding cotsize 6x3x1.5 6 24. Folding chair 4 25. Dining table with 6 chair 1 26. Deval watch Quartz 1 27. Table watch with alarm 1 28. Lock 2 29. Charge 6/12 volt 1 30. Sun Hot Emerson rod 2 31. Stabilizer 2 KVA 1 32. Food Processor 6005A00 1 33. Food Processor Jar 1 34. Kodak Camera with real 1 35. Philips steam iron 1 36. Mops 2 37. Merit Universal umbrella Sewing Machine 1 8.5. Food Science & Nutrition 1. Balance 5kg Dial type 2 2. Balance 1 kg dial type 6 3. Personal weighing machine 1 4. Analytical balance double pan AVON Make Model AB-F1 Capacity 200g 1 5. Voltas Stabilizer Vilex EWR 110-290 1 6. Voltas Stabilizer 1 7. Stabilizer 0.5 KVA for Refrigerator 1 8. Stabilizer 850 VA (fitted in refrigerator coca cola) 1 9. Bomb calorie meter with digital display Telco Make Model PLT-300 1 10. Bhagona St. steel with cover 19 cm 4 11. Bhagonaalluminium with cover 1 12. Knife 10 13. ChaklaBelan 7 14. ChaklaBelan 10 15. Cooker 6.5 lit. Howkins 1 16. Cooker Anupam 4 17. Howkins Pressure cooker 2 lit. 10 18. Idly cooker 1 19. Chhani 5 20. Glass steel 12 21. Gas cylinder 1.8 kg with lamp attachment 5 22. Stove Caption 6 23. Electronic Gas lighter 2 24. Gas tandoor (podimin) 1 25. Jug steel 2 26. Jug steel 2 27. Katori St. steel small 10 28. Katori steel 05 29. Chili cutter 1 30. Fanlastique Vegetable cutter 1 31. Kalchhi steel big 2 32. Greater 2 33. Booti mixer 1 34. Juicer attachment 1 35. Food processor singer 1 36. Mug tea 12 37. Muffles furnish regulator lamp model 5 KW Cap. Size 200x 200x300 mm retery J.K.W.9000C Model K1- 180 khera Make 1 38. Maharaja ketli White Line electric Kettle 1.7 lit. 1 39. O.T.G. bajaj Oven 1 40. Super Flame O.T.G oven with glass door with timer 1 41. Renold hot food cabinet box type 1 42. Knife cum peeler 2 43. Pelicane fitter cap. 20 lit. 1 44. Refrigerator Allvinindia ltd. 165 lit. cap. 1 45. Godrej Refrigerator 300 ltr. cold & gold Blue Compressor no. 146105 cabinet no. 146105 1 46. Stove nootan 5 47. Nootan stove 5 48. Tea spoon 12 49. Laboratory Table sheesam wooden top sunmica 60x30x30 1 50. Tava 2 51. Thali (2.400g) 5 52. Balti 1 53. Tea pot Melton 2 lit. 1 54. Container tin 15 kg 4 55. Vaccum pump (yarko make) cap. 45 lit./mit, 0.25 HP 1 single stage cat no. YSI-538-(-) less special discount @ 2% 56. Vaccum pump single stage cap. 25 lit. H.P. motor .25 model K1-106 1 57. Strainer (chalni) 1 9. Guest House 9.1 VC Residence College of Veterinary Science 1 0.1 Vet. Biochemistry 1 Automatic slide projector Getner MP 410 01 - - - - - - 2 Balance cell colorimeter 102 Systronics 01 3 Chinometric balance 01 4 Clinical chemistry analyzer 171 Systronics 01 5 Densitometer 205 Autoscanning computing Systronics 01 6 Flame Photometer CL360 ELICO 01 7 Glucometer 01 8 Lab Heating Plate with cast iron top 01 9 Lab wooden stool 05 10 Muffel Furnace 18x9x9 01 11 Over head projector RG200 -05 01 12 pH analyzer LI612 ELICO 01 13 Refrigerator 300Lit Capacity Godrej 02 14 Spectroflurometer SL 174 ELICO 01 15 Spectronic 20 Milton Roy 01 16 Triple Beam Blance direct reading 0.1 to 111 Grms 01 17 UV -VIS Spectrophotometer 119 Systronics 01 18 UV -VIS Spectrophotometer 117 Systronics 01 19 Wooden chair 05 20 Kyocera Mita Digital Printer (Taskalfa 180) 01 21 Analytical weight box upto 50grm 01 22 Physical Balance 01 23 R - E - G - N -008 Primary Gradient HPLC System with HD 461 SN003 01 24 VDO Cassette;Cell structural unit of life 01 25 VDO Cassette;Cell & What they Do 01 26 VDO Cassette;Cell Biology cytoplasm 01 27 VDO Cassette;Cell Biology Nucleus 01 28 VDO Cassette;Cell Biology the Plasma membrane 01 29 VDO Cassette;Cell Biology structure & composition 01 30 VDO Cassette;Biotechnology 01 31 VDO Cassette; Genetics:Improving plant and animals 01 32 VDO Cassette; Biological science:Molecular Biology 01 33 Transparency sheet Box Code No. 201 -04 Rescholar 01 34 Projection screen tripod model deluxe code No RO 2007 -01 01 35 Transparency Kit Cat. no.RO2001 -05 01 36 APC Back UPS 800 VA 01 37 HP Laserjet printer 2015 01 38 UPS 500 VA Mega Blue Bird 01 39 HP Computer PC DX 2280 Desktop PC 01 10.2 Animal Breeding & Genetics 1. Table VDO Size 04 1. Inclind Student Microscope 05 - - - 2. HP Laser jet 5 01 2. 3. HP Laser jet 1100 & Printer 01 3. 4. HP Desk Jet 970 01 4. Microscope Inclind Getner 01 5. HP Scan Jet 5200 c 01 5. Over Head Projector with Accessories 01 6. Zenith Pentium PC System with Accessories 02 6. Auto Slide Projector 01 7. 1 KVA Eltech UPS 01 7. Accessories for slide projector spare magazine 50 slide spare Halogen Temp 02 02 8. 1 KVA Eltek UPS 01 8. True Power UPS 1KVA 01 9. 3 KVA Eltek UPS 01 9. Kill buen document Binder 28 mm 01 10. Minolta EP 3170 Copier 01 10 . Duplicater Model 145 01 11. 2 KVA Voltage Stabilizer 01 11 . Godrej Type writer 01 12. 5 KVA Voltage Stabilizer 01 13. Window AC 1.5 ton with Accessories 02 14. Compaq Presario Computer with Accessories 04 15. Compaq Presario Computer with Accessories 03 16. Computer HCL with Accessories 03 17. HP Desktop 8000 series with Accessories 02 18. Tripple Beam Balance 01 10.3 Livestock Products Thechnology 1. HP Compaq PC DX 2280 desktop PC 1 No. 1. pH meter pen type digital microprocessor based with temp. campen 1 No - - - 2. HP Laser Printer 1320 N 1 No. 2. Cream Seperator (hand drive) 1 No 1. Transparency Sheet Box 1 No 3. Bottle washing machine 1 No 4. Ice cream freezer electric drive with electric moter 1 /2 hp 1 No 5. Ice Chamber 3 No 6. Milk Stainer 12 No 7. MBR Bath 1 No 8. Iron Bhatti 1 No 9. HP Colour Laser Printer CP 1215 1 No. 10 . 800 VAPC BACK UPS model BE 800 1 11 . 500 VAPC BACK UPS model BE 800 1 12 . Toner Cartridge 1 13 . Calculator 1 14 Battery 02 . 15. Protein Digestion Assembly 01 16. Kjeldahl Apparatus 01 1 0.4 Pharmacology & Toxicology 1 Vaccum Pump 1 1 Computer Compaq Presario 1 - - - 2 Refrigerator + Stabilizer 1 2 Over Head Projector 1 3 Electro -Convelsometer 1 3 Autoanalyser 1 4 Chinametric Analytical Balance 1 4 Chemical Balance 6 5 Pricription Balance 2 6 Perforated Board 1 7 UPS, APC 1 8 Spectrophotometer 1 9 UP Based Ph Analyser 1 10 Room Heater 2 11 Analgesiometer Tail Flick Method 1 12 Rota Rod Apparatus 1 13 Digital Electronic Top Loading Balance 1 14 APS Back UPS 1 15 Deep Freezer 1 16 Water steel Wall Mounting 1 17 Serological Water Bath 1 18 Vertex Shaker 1 19 Micro Tissue Homogenizer 1 20 Electro -Convalsometer 1 21 Isolated Organ Bath 1 22 Pole Climbing Apparatus 1 23 Singal Pan Electrical Balance 1 1 0.5 Public Health & Epidemiology 1. BOD Incubator “Tanco‟ 1 No - - - - - - 2. Refrigerator Godrej 303 Lit 1 No 3. Low Temp. Freezer “Tanco‟ 1 No 4. Quick Freezer “Mac‟ 1 No 5. pH Meter “Tanco‟ 1 No 6. Desk Top Computer HP 8000 Series 1 No 7. Printer HP(colour Laser Jet cp 1515n) 1 No 8. UPS (APC Back UPS RS 800 1 No 10.6 Gynecology & Obstetrics (Category A) Gynecology & Obstetrics (Category B) 1 HP Desktop PC (CPU+Monitor+Mouse+Key Board) 01 1 Dell Laptop (Accessory item) 01 - - - 2 Digital Electronic Top Loading Balance, capacity 300 gm 01 2 Digital Camera Sony Make (Accessory item) 01 3 Rescholar Overhead Projector Supreme 01 3 HP Deskjet Printer (Accessory item) 01 4 HP Laser Printer 01 5 800 VA APC Back UPS 01 6 Computer Table 01 7 Revolving Chair 01 8 Hand-held UV Lamp 01 9 Ultra Low Temperature Research Cabinet Yarco 01 10 Thermo heating Stage 01 11 Universal Trinocular Research Microscope MDILUX 01 12 Advanced digital colored video system 01 13 HP desktop computer set DX2480 01 14 HP laser printer -1005 01 15 650 VA APC UPS 01 16 Eleco FG LI 614Ph meter 01 17 Quick Freezer (Remi) 265 lit 01 18 Submarine Electrophoresis (Sonar) 01 19 Vertical Slab Electrophoresis (Sonar) 01 20 Digital Power Supply for Electrophoresis (Sonar) 01 21 High precision digital scale (Sonar) 01 22 Air Cartel (Sonar) 01 23 UV Sterile Chamber (Sonar) 01 24 Dell E-5410 Laptop 02 25 Reliance Data card 01 26 Analytical Balance Merck, 234 DE 01 27 Godrej Split AC (1.5 TON) Gse18F 3W 1 M 01 28 Digital Copier with printer & trey WC 5020 01 29 Stabilizer (3 kVA) 01 30 Pass Box Micro Make MSW-183 02 31 Economy Executive Chair 01 1 0.7 Vet. Surgery& Radiology 1 - Refrigerator (300Lt Godrej Cold Gold) 1 - - - - - - 2 - Stablizer Velex 0.5 kva 1 3 - Godrej Revolving Chair CHR -7 1014 1 4 - Weighing Machine( Libra make) 1 5 - Perforated Board 1 6 - Electric Emergency Light (Bpl dry battery) 1 7 - Mechanical Balance (200gm Capacity with .001gm readability & 90mm pan size). 1 8 - Auto razor Sharpener 1 9 - HP Computer ( pcd x 2280 desktop PC With CPU,Monitor,keyboard,Mouse) 1 10 - HP Laser jet Printer 1320 1 11 - UPS (800va apc Back ups modal BE800 1 12 - Over head projector (a) Suvira (b)Rescholar 11 13 - Microtome precision rotary 1 14 Microtome Razor 1 15 - Microtome Knife 120mm khera 1 16 - Magenetic Hot Plate stirrer 1 17 - Lab Table( C Cupboard 8x4x2.1‟) 2 1 0.8 Anotomy & Histology 1 Automatic Tissue Processor Deluxe Model SP 40 01 01 Wooden Chair Officer with Arm 01 - - - 2 Triple Beam Balance for direct Reading 3 Kg (Khera Model) 01 3 Triple Beam Balance for direct Reading 3 Kg (Khera Model) 01 4 Refrigeration with Stabilizer 300 lit. 01 5 Black Board with Stand 01 6 Drill Machine (Electric) 01 7 Stool Sunmica Top 06 8 Lab Stool Wooden 09 9 Godrej Chair PCH-1014 (750 x750 x 920 mm) 01 10 Godrej Chair CHR - 7 (560 x560 x 900 mm) with Arm 03 11 Godrej Chair CHR -7 without Arm 01 12 - Wooden Chair with Arm 03 1 0.9 Vet. Parasitalogy 1 Laboratry Centrifuge Machine (MAC) 4×50ml 1 1 H.P.Compaqe PC D×2280 Desk Top 1 - - - 2 B.O.D. Incubator (MAC) 500×830×415 1 2 800VA APC Back UPS 1 3 H.B.Meter Digital M.S.W. 547 1 3 H.P.Inkjet Printer 1 4 Chair (Revolving) Godrej 1 5 Bench (Wooden) 4 seater cat no.23 1 6 Staff Chair (Wooden) 5 10.10 Physiology&Bio Chemistry 1 Olympus Inclined Binacular Microscope 04 1 Sphignomanometer 05 - - - 2 Medilux-12 01 2 Mercury Sphignomanometer 04 3 Getner Binacular Microscope 01 3 Orpat Telephone 01 4 Godrej Refrigerator 300 Lit. 01 4 Isolated Organbath(MAC)MSW-722 02 5 Over Head Projector SUVIRA-301 01 5 Scientific Calculator 01 6 Mediflame Photometer Model -127 01 6 Medzer Monocular Microscope METZ777 03 7 Flame Photometer Model-CL-360 01 7 Officer Chair Wooden Armed 01 8 Stool Sunmica Top 03 8 Microscope Getner 01 9 UPS 800 VA,APC Model-800 01 9 Spare Cutter for Gel 01 10 IEC Electrophoresis 01 11 Disc Electrophoresis 01 10.11 Vet. Pathology 1 Microtome Precision Rotary YSI 114 01 - - - - - - 2 Microtome Precision Rotary Lip Shaw type MAC Make Cat No. MSW 452 01 3 Shaking Machine Type Yarko Make YSPL-516 01 10.12 Vet. Medicine 1. Deep freezer 01 1. PH metre 01 - - - 2. Milk analyser 01 2. PH metre 01 3. UPS 01 3. Stablizer 01 4. UPS 01 4. Stablizer 01 5. UPS 01 6. UPS 01 7. Printer 01 8. Printer 01 9. Rescholar Over Head Projector 01 10 Stablizer 01 10.13 Vet. L.P.M 1 Compact Centrifuge 1 1 Incline Student Microscope 4 1 Erma scope EP 404 1 2 Single Pan Balance 1 2 Steel table sun mica top with side drawers 1 2 Microtome 1 3 Hot Air Oven 1 3 Steel table sun mica 1 3 Mannual Type Writer 1 4 Lab Heating Plate with cast iron top 1 5 Triple Beam Balance 3 Kg 1 6 Triple Beam Balance 111gm 1 7 Microscope Monocular 2 8 Dissecting Microscope 2 9 Incline binocular Microscope 2 10 Trans Cope Compact Portable over head projector 1 11 Godrej chair without arm 1 12 Godrej chair 2 13 Refrigerator 1 14 Voltage stabilizer 1 15 Micro processor stirrer combined 1 16 Office table 1 17 UPS 800VA 1 18 Enameled kidney trey 8ʺ 1 19 Enameled kidney trey 10ʺ 1 20 Enameled kidney trey 12ʺ 1 21 Bull Holder 5 22 Enameled Mug 7cm 1 23 Enameled Mug 12cm 1 24 Enameled Funnel 6ʺ 1 25 Enameled Wash Basin 30cm 1 26 Enameled Wash Basin 36cm 1 27 Enameled Wash Basin 40cm 1 28 Enameled trey without cover 12x10 1 29 Enameled trey without cover 12x14 1 30 Enameled trey without cover 18x24 1 31 Enameled trey with cover 8x10 1 32 Enameled trey without cover 12x10 1 33 Enameled jug 2 point 1 34 Enameled jug 4 point 1 35 Enameled jug 6 point 1 36 Enameled bucket with cover 10ʺ 1 37 Enameled bucket with cover 11ʺ 1 38 Stomach pump set 1 39 Mouth Gag (Wooden ) 3 40 Mouth Gag Vernels 2 41 Tooth Cutter 2 42 Stomach Pump Complete 2 43 Rumenotomy set 2 44 Rumenotomy set best quality 2 45 Hoof Trimmer 5 46 Hoof Cutter 2 47 Curry Comb (horse) 8 48 Dandy Brush 1 49 Body Brush 2 50 Body Brush Super 4 51 Ridding Briddle (single/double) 2 52 Polo Saddle 1set 53 Driving bridle 2 54 Muzzle leather 2 55 Harness collar 2 56 Hobbles casting hitting for horse 4 57 Tooth Rasp Super Quality 1 58 Head Roap 5 59 Hoof Picker (horse) 2 60 Harness Saddle 1set 61 Harness crupper 2 62 Riding Saddle 1set 63 Cellophane roll 1 1 0.14 Vet. Extension Education 1. Computer -IBM 01 1. Student chair - wooden 03 - - - 2. UPS -IMS, 60 min. backup 01 3. UPS -Kukrej -03 min backup. 01 4. Exhibit panel outdoor -150x90 cm 03 5. Dual purpose, half exhibit& white 01 6. Stool - sunmika top 02 7. Chair armless, wooden 10 1 0.15 Animal Nutrition 1. Chainometric Analytical Balane Macromake 3 - - - 1 Autoclave - 2. Chemical Balance 1 3. Triple Beam Balance (110 g) 1 4. Triple Beam Balance (3000 g) 1 5. Triple Beam Balance (5000 g) 1 6. Refrigerator (Allwyn withstand and stabilizer) 1 7. Refrigerator (Godrej with stabilizer) 1 8. Vaccum pump (0.25 H.P) 1 9. Water Bath (10 ×6 steel round) 1 10. Water Bath (Single Wall size) 1 11. Bomb Calorimeter MSW 1 12. Low cost freezer (MAC) 1 13. H.P. Compaq Desktop with printer and UPS 1 14. H.P. Compaq Desktop with printer and UPS 1 15. Metabolic Shaker Chamber 1 16. Vortex Mixture 1 17. Willey grinder mill (0.25 H.P.) 1 18. U controlled based P.H. System (Systronic) 1 19. Spectrophotometer (Systronic) 1 20. HP printer jet1360 1 21. CD writter 1 22. Over Head projector (SUVIRA) 1 23. Over Head projector (Reschlor) 1 24. Over Head projector (Trolley) 1 25. Projection Screen 1 26. Projection Screen 1 27. Lab stool (Wooden) 5 28. Armed Cushion Chair 3 29. Name Plate(Big Size) 8 30. Name Plate(Small Size) 3 31. Perforated Board(180 × 90) 2 10.16 Teaching Veterinary 1. Armed Office Chair Wooden 05 1. Laminated Chart Framed on 6 mm ply with beading (22”x28”) 24 16 1. Street Light fitting (Removed from VCC building and Electric poles for replacement with LED lights) 7 No 2. Christensan‟s teat Slitting scissors 4 2. Name plate on 12 mm Ply (2‟x1‟) 10 2. Tube light Fittings 20 N0 3. Conical Teat Tumor Extractor 4 3. Name plate on 12 mm Ply (6‟‟x11‟‟) 10 3. Ceiling Fan 02 No 4. Dressing Scissors 4 4. Stethoscope 2 1 4. Fan Rod 20 No 5. Ear Cropping Clamp 4 5. Torch 1 5. Guiser 01 No 6. Intestinal Clamp 4 6. Uterine Catheter 4 6. Metallic Window Frame 02 No 7. Orthopedic Hammer 2 7. Uterine Scissors 2 7. Refrigerator 300 Lit Alwin 01 No 8. Orthopaedic wire Saw 2 8. Hug Teat Lancet 4 8. Metal Net Frame 05 No 9. Pliers/ Plas 2 9. Teat Slitter Single Blade 4 9. Wooden Net Door 01 No 10. UP Bsaed double beam UV -Vis Spectrophotometer with accessories 1 10. Teat Tumor Extractor 2 10. Plastic Water Tank 01 No 11. Suture Cutting Scissors 2 11. Teat Plug 4 11. MCV Box/ Main switch 05 No 12. Shadowless Lamp 1 12. B. P. Handle No - 3 4 13. Thumb Forceps 4 13. B. P. Handle No - 4 4 14. Teat Tumor Extractor 4 14. Bistouri 6 15. Teat bistouri with conceal blade 4 15. Mouth Gag 1 16. Teat canula 4 16. Swab Holder 4 17. Wokman scoup 4 17. Sterilizer Hooks 5 18. HP Desk Jet Printer D 4368 (@ 40% / annum) 1 18. Tooth Forceps 10 19. ECG machine Single Channel (MAC -MSW 734) 1 19. Forceps 4 20. Remi revolutionary gen purpose lab Centrifuge 1 20. Scalpal 1 21. Swingout Head with graduated conical tube cat - R -81 Remi (Fixed in Centrifuge) 1 21. Instrument Tray (30x45 cm) 1 22. Sony handicam Model DCR SC 36 E, Sr no. 294249* (@ 40% / annum) 1 22. Kidney Tray 25 cm 1 23. Compact Multimedia Projector Getner make (@ 40% / annum) 1 24. Digital haemoglobinometer HBI „MAC‟ MSW -547 1 25. Stop watch Tanco 2 26. Plastic coated Projector Screen PS.501 tripod Model Suvira 1 27. Suvira Laser Pointer GP -203 Getner 1 28. PC Based Micro Scan (ELISA Reader) with accessories (@ 40% / annum) 1 29. Hoof Plane 2 30. Long Fine Teat Bistouri 4 31. Long Fine Teat Bistouri Probe pointed 4 32. Green Teat slitter 4 33. Teat lancet 5 34. Farrier‟s Hammer 2 35. Probang 2 36. Hoof tester 2 37. Trefine Teat Knife 4 38. PH Meter with ATC probe and combined electrode (CL -51B) Elico LI -614) 1 39. Rescholar Dual Purpose Half Exhibit Half White 1 (150x120cm Cm) 40. Rescholar Perforated Board (180x90 Cm) 1 41. 800 VA APC Back UPS (BE 800 IN (@ 40% / annum) 1 42. Armless Student Chair wooden 10 43. Four Seater Wooden (Shesham) Bench with Plastic cone seat and back 2 44. Chair X-103 (Methodex) 1 45. Burdizzo Castrator LA 1 46. Trocar and Canula for SA 2 47. Triple Beam Balance (Direct Reading) Model ABTi12) 1 48. Whelping Forceps 2 49. Slide Box for 100 slide 4 50. Instrument Pocket Case 1 51. Bowl SS 20 cm 2 52. Paragon Knife 2 53. Artery Forceps 3 54. Test tube Stand Aluminium 3 55. Triple Stand 6 56. Obstetrics Instrument Complete Set 2 57. Wooden bench (6‟x3‟ 1.5‟) 1 58. Liquid Nitrogen Container Model CB-20 cap 20 Lit 2 59. Dark Room Safe Light 2 60. Film Drying Rack 1 61. Film hanger 6”x8” 3 62. Film hanger 8”x10” 3 63. Film hanger 10”x12” 3 64. Film hanger 12”x15” 1 65. Film Holding Clip 4 66. Lead Apron 2 67. Processing Tank 13.5 Lt with Lid 1 68. X-Ray cassette 6”x8” 4 69. X-Ray cassette 8”x10” 4 70. X-Ray cassette 10”x12” 4 71. X-Ray cassette 12”x15” 3 72. X-Ray Film Viewer (Single Plate) 2 73. Seimens X-ray unit Fixed with Rotary anode 300 1 mA machine with accessories 74. Intensifying screen 6”x8” 4 75. Intensifying screen 8”x10” 4 76. Intensifying screen 10”x12” 4 77. Intensifying screen 12”x15” 3 78. Measuring Caliper 1 1 0 . 1 7 LFC,CVSC & AH 53 Mª sflax Mªe 225X225 yarko 400 YSI 01 54 I.M.S. Make UPS 1 KVA 01 55 Desktop Computer HCL Make Pro BL 1225, CD Writer Windo XP 01 56 Online APC UPS RS 1100 01 57 p s;j IykfLVd 16 58 o qMu ps;j 01 59 vkeZ dqku ps;j 07 11. MCAET Ambedkar Nagar 11.1 Group (A) Group (B) 1. Laboratory cooler motor with water pump 1 1 Budding Crafting knife 1 - - - 2. Drum Cap 200lit 1 2 Fruit catcher with pipe 1 3. Call Bell 1 3 Hedge shear 8ᶥᶥ 1 4. Stapler HP 45 2 4 Loaping shear rol cut type 1 5. Stapler 10No. 2 5 Loaping shear shearing type 1 6. Panching 0.45mm 2 6 2X6 ear Loaper 1 7. Godrej work chair 01 7 Angular Long Reach Pruner 1 8. Godrej printer work 01 8 Fruit Gatherer with pipe 1 9. Godrej INT Computer work 01 9 Pruning Saw 1 10. I.I.S.R sugar cane cutter planter 01 10 Weeding Fork 1 11. Allen key 01 set 11 Hand cultivator 1 12. Water pump plier 250 mm 01 12 Garden tool 1 13. Combination plier 200mm 01 13 Garden hoe 1 14. Bent nose plier 200mm 01 14 Dutch hoe 1 15. Chisel 02 15 Garden Rake (16 teeth) 1 16. Chiisel 02 16 Shovel 1 17. Claw hammer 450 gram 02 17 Digging Fork 1 18. Screwdriver 01 set 18 Khurpa 4 19. Nose plier 02 19 Spade 1 20. CVT 2kva 01 20 Leather Waist Belt 1 21. HP laser printer 01 21 Power tiller oprated Rice transplanter 1 22. Kamco power reaper 01 22 Till Plant Machine 4 23. Auto slide projector 01 23 P.T.Potato Planter 1 24. Display notice board 3 into 4 inch 01 24 Moister Box 50 25. A P kising letter 18,24,12mm 5 box 25 Hazara 1 26. Figure asp 18,24mm 02 box 26 Husk Sow Frame 12 27. Sony camera with accessories 01 27 Screw Driver 8/250 04 28. B.D speed drill 3 row 01 28 Screw Driver Set 2 set 29. Compaq computer 01 29 Screw Driver Tester 2 no. 30. HP laser printer 01 30 Mini Rice Mill 01 31. Photo copier machine Aficio & attachment -1-9 01 31 Nap Sak Sprayer 01 32. Old drum 01 32 Pocket Calculator 01 33. TRAINGULAR FILE 1 33 Spring Balance 03 34. FIRMER CHISEL 1 34 Steel Box 4”*2.5”*2.5” 05 35. DOVETAIL CHISEL 1 35 6 Disk Harrow 01 36. TRAINNEES CHAIR-SS-2 30 36 Working Bench 02 37. Digital Electronic Top loading balance 1 37 Stool 40 38. Laboratory Heater with Power 1 38 Dynamo Pulley 01 39. Calculater cyber desk 1 39 Pulley Small Size 01 40. PoketCalculater cyber 1 40 Pulley Big Size 01 41. Sc. Calculater cyber 3 41 D/E Spanner 04 42. Al. Box (Sample) 30D3h 42 Grease Gun Bucket 02 43. Top Pan Blance 500gm 1 43 Welding Transformer 01 44. Spring Blance 20kg 1 44 Valve Refacer 01 - - - 45. Stop Watch 1 45 Double Shoe Brake Model 01 46. Fawada 5 46 Model Internal Exoanding Shoe Brake 01 47. Box 177 X 66X 66 4 47 Model Band Brake 01 48. Sample Box Al. 10D3h 48 Model Disc Brake 01 49. Duplicater med EF112 1 49 Model Impeller Of Pump 01 50. Parshell Flume 3‟ 2 50 Model Turbine Pump 01 51. Parshell Flume 6‟ 2 51 Model Different Type Of Valve 01 52. Board 8‟X 4‟ 3 52 Model Cam Reciprocating Follower 01 53. Board 3‟X 2‟ 5 53 Model Different Type Of Seal 01 54. Parshell Flume 3‟ 2 54 Model Reciprocating Engine Mechanism 01 55. Board 2x2 13 55 Model Oscillating Cylinder Mechanism 01 56. Hot Air Oven 1 56 Model Single Plate Clutch 01 57. Pan Blance Plastic 1Kg 1 57 Model Multi Plate Clutch 01 58. Plastic Pan Blance 2Kg 1 58 Model Centrifugal Clutch 01 59. Plastic Pan Blance 4Kg 1 59 Lecture Stand 01 60. Parshall Flume 3‟‟ 2 60 Steel Lock 65mm 12 61. ParmeabilityAppratus 2set 61 Steel Lock 40mm 12 62. Core Sampler 1set 62 Godrej Lock 01 63. Core Cylinder 24 pair 63 Wooden Laboratory Bench 7inch*2.5inch 05 64. Tensiometer 2” (22.5 cm.) 10Pc 64 Wooden Table 4inch*2inch 02 65. Tensiometer 2” (30 cm.) 10Pc 65 Ring Spanner 6 -22 08 66. Tensiometer 2” (45 cm.) 10Pc 66 Spirit Level 02 67. Soil infiltometer with set 1 67 Plumb Bob 05 68. Top Pan Balance Mech. Cap-1000g 1 68 Aspa Cyno Gas Pump 01 69. Front Dial Top loading –Balance Cap 500gm 1 69 Cut Model Petrol Engine 01 70. Cooler for complet 20” 2 70 Model End Cam Reciprocating 01 71. Hot –Air Oven Hindustan 1 71 Seesham Table 6”*3”*2.5” 01 72. Bond 1‟ *1‟* 3‟ 30 72 Seesham Table 6”*2.5”*3” 01 73. Lock 65m 2 73 Lab Table 6”*2.5”*3” 10 74. Bycycleherculish ,complete 3 74 Slide Projector Etc 01 75. Lock 65 mm 2 75 Table Wooden 4”*2”*2.5” 02 76. Infrared moisture meter 152720with core cutter 1000mm dia 1 set 76 Table Wooden 4”*2”*2.5” 01 77. Shine Board 3‟ * 2‟-1, i* 1-30 31 77 Table Wooden 4”*2”*2.5” 01 78. Shine Board 2‟ * 2‟*8 -1 12 78 Steel Almirah Small 01 79. Shine Board 3‟ * 2‟ 1 79 Steel Almirah Small 1525*760*460mm 01 80. Angle board 3‟* 2‟ 3 80 Rack Wooden 02 81. Plate 1*1 15 81 Office Chair Wooden 02 82. Aspeejublee duster 1+1 82 Type Writer English 158998 01 83. Triple beam balance box type 1+1 83 Type Writer Hindi 179770 01 84. AspeeNospat sprayer 16lit 1+1 84 Steel Table 1370*760*760mm 01 85. Marutihonda compression stronger cap 3.5 lit 1 85 Steel Table 1370*760*760mm 01 86. U.S.A vivration Pan 2 86 Steel Table 1500*910*760mm 01 - - - 87. Board 1‟* 1‟* 3‟ 60 87 Steel Table 1500*910*760mm 01 88. SLR camara (Asia Painter ) 1 no 88 Steel Table 1830*220*760mm 01 89. Heating Maritles 200ml 1 no 89 Steel Chair 1. With Arm 1. Without Arm 02 90. Lab heating Plate 1 no 90 Wooden Chair With Arm 02 91. Single pan balance 2 kg 2 91 Wooden Chair With Arm 04 92. Spring balance- 20 kg 1 92 Wooden Chair With Arm 03 93. Spring balance -50 kg 1 93 Wooden Chair Teak 02 94. Screw auger 2 94 Steel Chair With Arm 01 95. Digital conductivity metre 1 95 Wooden Chair 03 96. Digital PH meter 1 96 Wooden Chair With Arm 02 97. Water still (barrasted) 1 97 Steel Almirah Big 01 98. Point gauge 7.5 CM 2 98 Steel Almirah Big 01 99. Soil hydrometer 6 99 Steel Almirah Small 01 100. Planimetre 1 100 Steel Almirah Big 01 101. Digital spectro photo meter 1 101 Steel Almirah Big 01 102. Electric sounder 100 deep 1 102 Filing Cabinet 01 103. Stopwatch 2 103 Hind Cycle 01 104. Water current metre small 2 104 Packet Calckulater(Dcm) 01 105. Water current metre medium 1 105 Rack Wooden 01 106. Pressure bomb apparatus 1 106 Wooden Glass Chair 30 107. Self propelled and row rice transplanter 1 108. Wheel hoe 2 109. B.D.Harrowpatela 2 110. B.D. multicrop planter 2 111. B.D. lugged wheel planter 2 112. Compaq desk computer 1 113. H.P. laser jet printer 1 114. Mitshubishishakt power tiller and attachment 1 115. Computer table CT - 1 2 116. Computer chair 1 117. APC -1 KVA 1 118. stop watch 2 119. Sc. calculator 1 120. Calculator official 1 121. Measuring tape 2 122. Motor 1 h.p. P.I. Phase everest 1 123. Vpulley 10” FittedBurrMipp 1 124. Vpulley 4” Fitted motor 1 125. Hot air oven hindustan 1 126. Lock harrson 1 127. Sc. calculator 1 128. Room heater 1 - - - - - - 129. Digital temperature indicator 1 130. Electronic top pan balance 1 131. Slide film projector 1 132. Stop watch 1 133. Starter I Phase 2 134. Main switch 2 135. Oil cane 1 136. Emergency Light 2 137. Display Board-4‟*5‟ 4 138. Lock Nav Tal 2 139. Torpoulin 1 140. Desk Calculator 1 141. Typewriter English 1 142. Plier-8” 1 143. DPR Daff Mill with Motor 1 144. Lock 1 145. Lock (Godrej) 1 146. Combination Plier 1 147. Pipe Wrench-12” 1 148. Screw Driver-934 1 149. Screw Driver-824 1 150. Hack Saw Frame 1 151. Wooden Rasp File 1 152. Drill Machine 1 153. Drill bit Set 1set 154. Scale 2 155. Tap 3M 2 156. Adjustable Wrench 1 157. File square 1 158. File half round 1 159. Hand saw -450mm 1 160. Hand saw -350mm 1 161. Gim pet 1 162. Container 1 163. Imerson rod 1 164. Bhagona 3 165. Kalchul 2 166. Palta 1 167. Parat 1 168. Calculator 10 digit 1 169. Spark regulator for above fillar cabinet sndicator Card and plug 1 170. Nozzeltoslav cap1 lit 1 171. Tripal 7/4 1 172. Tripal7*4 1 173. Portable moning AC voltmeter 20 174. ATCO balance with platform 1 175. Kirbskar motor 7.5 k 10 H.P 1 176. L&T make starter delta rang 6-10 AMP 1 177. Orpet calculator 1 178. Tripal 6*5 squ yard 1 179. Cello tax board a* 2.5 2 180. Sanye LCD Multiprojector model -PLC 2 181. Exhubit Panel with acrylic 120 60 RD-117- 11 1 182. Plastic Body Front Top Balance cap-1Kg 5 183. Plastic Body Front Top Balance cap-1Kg 5 184. Dari Parsi12‟*12‟ 12*15‟ 2 185. Voltage stabilizer 3 kw ----- 186. Kangaroo Heavy duty Stapler ----- 187. Electric Hot Air Oven 01 188. National Power triller attachment 01 189. Tamilnadu conveyor reaper 01 190. Cage wheel 02 191. Scientific calculator DCM 01 192. Hand shearing machine 01 193. Grass cutter 01 194. Mitsubishi power triller attachment 01 195. Thressur with fan 5 HP 01 196. Disc Harrow 8 disc 01 197. Triple beam balance 300 gm 01 198. Triple beam balance 111 gm 01 199. Physical weigh box made from Beam 01 200. Kisan paddy thresher 01 201. Box size 3 * 1.5 *1 inch 01 202. Lock 01 203. Stopwatch 01 204. Hazara 01 205. Hydraulic dynamometer 01 206. Ground Net potato digger 01 207. Temperature indicator 01 208. Temperature probe 02 209. General probe 01 210. KAMCO Power tiller with attachment 01 211. Power tiller auger 01 212. Tall tree duster 01 213. Potato planter 3 row 01 214. Power triller tech book 01 215. Hi tech frame 01 216. Lugged Wheel 02 217. Tail wheel 01 218. Mitsubishi Shakti Power triller 01 219. Calcuater cyber 02 220. Socket set gedor 1 Set 221. Long nose plier 02 222. Side cutting plier 01 223. Socket 10,20,22,24 mm 4 Pc. 224. Night duty drill welf 13mm 01 - - - - - - 225. Angle grinder attachment 01 226. Energy metre 01 227. Vane Shear Apparatus 01 228. Stand MB 343 01 229. I.I.S.R Sett Cutting Machine 01 230. BD sugarcane planter 01 231. G -1 Bin 5Qt &1Qt 2 232. Desk Calculator 1 233. Load Ceff (0 -500kgl) 1 234. Load Ceff (0 -2500kgl) 1 235. Load Ceff indicator 1 236. Knap Sake Sprayer -16 lit 1 237. Gas Analyser Apparatus 1 238. P.T. Repeater 1.6 M 1 239. S - S -column Porapack 1 240. S - S - column Modicular 1 241. Gas sampling syringe 1 242. 8 Row paddy Transplanter 1 243. Oxygen Analyser 1 244. P.T. Axial flow pump 1 245. 6 Row Rice Transplanter 1 246. Stop Watch 1 247. Electronic Top Pan Balance 1 248. Rechargable Battery 1 249. Air Shield Case 1 250. Yorco Hot Air Oven 1 251. Nozzel Tester 1 252. Mechanical Jack 5Ton 1 253. Reamer Set-15 Pc. 1set 254. Steel Scale 30cm 2 255. SARACHI Power Trillerchinease with attachment 1 256. Flexible shaft 5/8 11 x 3 M 1 257. P.T Potato Planter 1 258. Digital Pulse Monitor 1 259. Motor Cycle bajaj Kawasaki 1 260. D.E. Spanner Set 1 set 261. Ring Spanner Set 1 set 262. Pipe Wrench 1 263. Socket S etc
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 5
Uttar Pradesh View Result →
26.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
27.
Drinking Water Supply and Sanitation #8792696 Technical Bid
Supply And Installation Of Modern Scientific And Electronic Instruments For Operation Of Telengiri Dam Instrumentation Of Dam - 1 Providing, Fixing, Testing & Commissioning Electro Digital Water Level Recorder ( Laser Technology With Sms Facility ) Tag To Server Installed At Dam Safety Office, Bhubaneswar With Following Instruments And Structures For Level And Storage Measurement In Reservoir And Opening Depth / Discharge Measurements From Telengiri Dam, Providing Training To The Field Staff Including Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. 2 M.S. Structure: - Providing, Fabricating & Fixing M.S. Structure Of Required Length To Suit The Site Protected From Reservoir At Top Of The Dam, Made Of 50 Mm X 50 Mm X 6 Mm M.S. Angle Frame Fixed At Dam Front And At Every 0.5 Meter Distance, Fitting In Power Fastener, Painting With Three Coats Of Epoxy Anticorrosive Paint Including Providing & Fixing Pvc Pipe Of 6 Diameter As Per Site Condition From Dam Fsl To Required Lowest Level Of Water Etc; All Complete As Directed By The Engineer-In-Charge. 3 M.S. Platform: - Providing, Fabricating & Fixing M.S. Platform Of Size 1.25 Meter X 1.25 Meter, Fixed In Power Fasteners, Painting With Two Coats Of Epoxy Paint, M.S. Chequered Sheet For Base Plate Including Installation Of Frp Cabinet And Laser Unit Box, M.S. Railing From Three Sides Etc; All Complete As Directed By The Engineer-In-Charge. N 4 Electroray Unit:- Providing & Fixing Electroray Unit With Laser Beam Mounted On M.S. Plate, Provision For Adjustment In Both Axis, Foundation Frame Of 40 Mm X 6 Mm Strip Foundation Bolts, Frp Float For Buoyantly Thrust, Powder Coating, Electronic Sensor Holding Mechanism Mounted In Base Plate And Covered With Frp Security Plate And Security Box With Key & Lock Arrangement, Capacity Measurement For Water Head Zero To 100 Meters Etc; All Complete As Directed By The Engineer-In-Charge. 5 Programme Unit:- Supply Of Data Storage Unit Built In Ip 65 Cabinet From Environment Protection With 64 Kbe2 From Data Storage Memory, Transfer Port With Electronic Cartridge [ Dongle ] For Powerless Automatic Data Transmission And / Or Instant Data Transmission [ Like Blue Tooth ] , 6V Lithium-Ion Battery For Life More Than 15 Months, Two Lines Display, Time Stamping At Ten Different Modes, Maxim Rs 485 / 422 Line Drivers With High Esd Protection For Rs 485 / 422 Communications, Microcontroller Internal 13 Bit Khz Watch Crystal, Two Lines Lcd Display On Mains Supply, Wireless Data Transmission Port Etc; All Complete As Directed By The Engineer-In-Charge. 6 Frp Cabinet:- Supply And Installation Of Fiberglass Reinforced Plastic ( Frp ) Cabin Of Size 1.20 Meter X 1.20 Meter X 2.10 Meter, Both Side Finish, One Side Door And Sliding Aluminum Windows, Frp Roof At Top Of Cabin, Installation On M.S. Platform Etc; Complete As Directed By The Engineer-In-Charge. 7 Software :- Supply Of Dl-Meter Software ( Version 2.0 ) & Loading On Computer For Following Analysis: A )      Log-In Operation B )     Administration Menu C )      System Information About Name Of Govt., Organization, Office, Place, Signing Authority Etc. D )     Master Menu Content For Relative Head E )      Measuring Station Configurations About Ms Code, Consumer Code, Name, Jurisdiction, Location, Sample, Interval Etc. F )      View Station Settings G )     Transactions For Data Capture, Head Content Table Etc. H )      Reports For List Of Measuring Station, Authorized Users, Daily / Fortnightly / Monthly Schedule Time Interval History Etc. I )       Charts Numerical And Graphical For Monthly / Yearly Head / Content Consumption Distribution Etc. J )       Help For Operation And Maintenance Of System. 8 Fixing & Commissioning Of Dl-Meter Unit And Programme Unit On Pvc Pipe, Foundation Template, Nut-Bolts And Cabinet In Line & Level Completed Item As Directed By The Engineer-In-Charge. 9 Testing & Training For Dl-Meter To Field Staff And Operator For Handling Troubleshooting, Data Transmission, Software Operation Etc; Complete As Directed By The Engineer-In-Charge. 10 Providing And Fixing Fencing To Recorder Cabin For Extra Protection Including 50 Mm X 50 Mm X 6 Mm M.S. Angle Structure Covered With M.S. Mesh Of Size 2.5 Cm X 2.5 Cm With Two Coats Of Anticorrosive Epoxy Painting Etc; All Complete As Directed By The Engineer-In-Charge. 11 Inverter :- Supplying, Fixing, Testing And Commissioning Inverter For Power Back Up To Recorder, Luminous Brand 12 V 500 W Capacity Operating On Mains On Solar Energy With Auto On / Off Switch Over With M. S. Bracket Luminous Brand Lithium Battery Of Capacity 150 Ah Lpt 12150 Htt With Power Connection, Battery Stand, Brackets, Wooden Planks & Rubber Sheets, Led Candle Light Of 5 Watt Bulb, Cover With Packing, Forwarding, Transportation And Installation At Site With All Electrical Fittings, Cable, Switches, Plugs For Battery & Inverter, Recorder And Light Including Testing & Training To Field Staff Etc; All Complete As Directed By The Engineer-In-Charge. 12 Providing & Fixing V-Notch ( 15 Ltr. / Sec ) Made Of Glass Fibre Improved “Venturi” Plate Conforming To Is: 9108 For Accurate Measurement Of Water Flowing Through Channels Comprising Of Masonry Construction Provided With Pre-Fabricated Glass Fibre Lining On Both Sides, A Side Chamber Provided In One Side Masonry Wall Of The Said V-Notch On The Upstream Side, A Pipe Provided At The Bottom Of The Chamber Connecting The Said Chamber With The Water Flowing Through The Flume, A Float Means Provided In The Said Chamber, Enabling Recording The Rising Or Falling Level Of Water In The Said Chamber Such As A Scale Provided In The Said Chamber, Moulded Engraved Gauge Marking In Lit / Sec And Also In Centimeter Including Moulded And Engraved Discharge Table, Capacity Marking, Flow Direction, Manufacturer Name And M.S Pipe Stiffeners, Hold Fasts, Sand Treatment On The Backside Of Plate Etc; Complete Including Concrete Foundation 2.0 M ( L ) X 0.50 M ( W ) X 0.15M ( D ) With Verticlal Concrete Wall Behind V-Notch Of Thickness 0.10 M And Transition Wall For Up-Stream & Down-Stream For 25 M Length With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. 13 Providing & Fixing Polymer Composite Improved Calibration Marks With Contact Moulding Process, Both Side Finish, M.S. Strip Embedded Inside, Engraved And Molded Marking For Bands And Figures Covered With Radium And Covered With Two Coats Of Polyurethane For Surface Protection With Marking Of Reduced Levels, Sill, Fsl, Frl, Mwl Etc; With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. 14 Providing & Fixing Polymer Composite Improved Calibration Marks With Contact Moulding Process, Both Side Finish, M.S. Strip Embedded Inside, Engraved And Moulded Marking For Bands And Figures Covered With Radium And Covered With Two Coats Of Polyurethane For Surface Protection With Engraved Marking Of Salient Features, Chainages, Numbers And Instructions In Eye Pleasant Colour Combinations As Per Demand For Given Size And Location Including M.S. Frame And Concrete Work With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge ( For Salient Feature Board / Chainage Board / Instruction Board / Data Board Etc. ) 15 Providing, Fixing, Testing And Commissioning Of Vibrating Wire Type Standard Piezometer Of Following Specification To Measure Ground Water Pressure Along With Required Accessories Including Drilling, Boring, Pipe And All Other Statutory Charges Etc; As Per Requirement With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge But Excluding Periodical Read Out Unit & Stop Watch. Specification: *Standard Range : 5-200Ksc *Over Range : 2 X Rated Pressure *Sensitivity : 0.1 % F.S. *Accuracy + / - 0.5 % F.S> * Temp. Range -20ºc To +70º C *Length X Diameter ( 140 Mm X 20 Mm ) / ( 194 Mm X 25.4 Mm ) / ( 140 Mm X 25.4 Mm ) 16 Supplying Periodical Read Out Unit For Piezometer Complete Set With Required Software, Specification And Commissioning With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. Vibrating Wire Read Out Box Shall Be Portable Unit Designed For The Read Out Of All Vibrating Wire Gages And Transducers And Shall Be Capable Of Displaying The Reading In Digits, Frequency ( Hz ) , Period ( Us ) , Or Microstrain ( Μ£ ) . The Read Out Shall Also Display The Temperature Of The Transduer ( Embedded Thermistor ) With A Resolution Of 0.1°C. All Readings Shall Be Transmitted To A Host Computer And Imported Into Spread Sheet And Database Applications. Suitable For All Vibrating Wire Pp Meter To Take The Data From Sensors Directly In Engineering Units. The Unit Shall Store 750 Data With Date & Time And With Rs 232 / Rj45 Port ( Wi-Fi Optional ) To Down Load The Data In A Pc. The Unit Shall Be Rechargeable Battery Operated . Specifications : * Excitation Range : 5 Volt Square Wave * Measuring Resolution: 0.5 Ms. * Memorry: 64K Eprom * Reading Storage : 750 Data In Engineering Mode 17 Supplying & Fixing Digital Display Portable Isi Marked Stop Watch With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. 18 Supplying & Fixing High Resonance Cc Tv Camera System, Gorilla Type, With 8 Ch 4 K Net Work Video Recorder, 8 Channel Ip Camera Input, H.265 / H.264 Dual Video Formats, Support 4 K Resolution Up To 8 Mp Recording, 80 Mbps Incoming / Outgoing Bandwidth, Support 1Sata Hdds Up To 8Tb, 3Usb Ports, Support Multi-Brand Network Cameras, Mobile Software: Android, Ios, Cms Software : Ivms Etc; With Following Accessories With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge 19 Cp Plus 8 Ch Nvr 2Sata 20 Cp Plus 2 Mp Ip Ptz ( Moving Camera ) 21 Cp Plus 3 Mp Ip Motorised Verry Focal ( Fixed Camera ) 22 8 Port Poe Switch 23 Survilance Hdd 4 Tb 24 Point To Point Antena 25 Cat 6 Cable 26 Rj 45 Clips 27 Metal Box At Each Camera & Antena 28 Power Point At Each Camera 29 Pole At Each Camera 30 Display Unit And Installation Charges 31 Providing, Fixing, Testing, Training And Commissioning Total Weather Station Tag To Server With Sms Facility Installed At Dam Safety Office, Bhubaneswar With Gsm Interface Metrological Station, Imd Approved Monitoring Of Hourly Data Of Temperature, Humidity, Wind Velocity And Rain Gauge Of Data Transfer Through Sms For Ten Mobile Numbers, Gsm Recharge By Department And Memory Card And Tag To Code Analyser. Server With Software, Mounting Tripod 3 Meter, Earthling Kit, Usb Weather Link With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. Parameters : In Sms A ) Location, Date, Time B ) Rainfall In Pre-Decided Time And Cumulative Rain Fall C ) Temperature Minimum And Maximum In A Day D ) Relative Humidity Minimum And Maximum In A Day E ) Wind Speed Minimum And Maximum In A Day F ) Wind Direction At Pre-Decided Time 32 Providing & Fixing Joint Meter Of Following Specification With All Required Accessories Including Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. A ) Range: 0 - 50 Mm. B ) Accuracy : + / - 0.5 % Fs. C ) Resolution: 0.05 Mm. D ) Emp Limit: 10 To 70 Deg C. E ) Thermister: Ysi-44005 Or Equivalent. Material: Stainless Steel F ) Materials: Stainless Steel ( To Be Installed Between Block No. 2 & 3; 4 Nos. At Each Block Joint To Monitor The Joint Opening ) 33 Providing & Fixing Ph Meter ( Portable ) 3 1 / 2 Digit Lcd Display In Abs Plastic Body With Touch Switches And Combination Ph Electrode Of Following Salient Features With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. A ) Measurers Ph, Mv And Temperature 5 Point Calibration. B ) 16 X 2 Line Alphanumeric Lcd With Backlit. C ) Auto Buffer Recognition Facility. D ) Storage Up To 1000 Samples. E ) Attachment For Centronics Dot Matrix Printer 34 Supply, Installation & Monitoring Of Seismograph Of Following Specification & Parameters From Sl. No. 10.1 To 10.9 Below With Cost, Conveyance, Labour Charges, Tools & Plants, Taxes ( Excluding Gst ) Etc; All Complete As Per Relevant Specification & Direction Of The Engineer-In-Charge. 35 * Performance Tested By University Of Technology Sydney, University Of Melbourne, Ce Certified. * Records Triaxial Data From Integrated Seismometer Continuously To Sd Card Storage. * Fault Detection - Sd Card Full / Error, Power, Temperature * Real-Time Alarm Output To Relay Circuit During Earthquake * Internal Battery Available ( Optional ) . * Designed For Minimum 10 Years Operation. Kelunji Prism Used In Structural Monitoring Have Operated For Over 20 Years, Producing An Aggregate Mtbf Of Greater Than 5 Years 36 Recorder: * Type : 32-Bit Adc * Data Channels : Three, Synchronously Sampled * Full-Scale Signal ( Standard ) 40 Vpp ( Voltas Peak-To-Peak ) * Sensitivity ( Standard ) 419430.4 Counts Per Volt * Preamplifier Gains Available ( User Selectable ) X1, X2, X4, X8, X16, X32, X64, X128, X256. * Frequency Reasonse Dc To 2000 Hz Sampling Rates Available ( Samples Per Second ) 40, 100, 200, 250, 400, 500, 800, 1000, 1600, 2000 37 Sensor: * Type : Velocity * Data Channels : Triaxial ( East-West, North-South, Up-Down ) . * Sensitivity : 868 V / M / S. * Noise Performance Below Nlnm Between 2 And 9 Second Period, Freqency Response 30 Second Period To 80 Hz. 38 Timing: * Reference Time Stamp With Every Pps ( Pulse Per Second ) From Gps Receiver Accuracy: Rms 30 Nano Seconds. 39 Recording: *File Recording Options: Continuous ( Always On ) * Trigger / Alarm: Algorithms Sta / Lta ( Any / All Channels ) , Level ( Any / All Channels ) , System ( Voltage, Memory, Temperature ) . * Storage Memory Type : Sd Card ( Sdhc Or Micro Sd Using Adaptor. Included Storage 32 Gb ) . * Continuous Triaxial Recording Capacity @ 100 Sps Over 1 Year Of Data Stored In A Ring Buffer ( Oldest Data Over Written When Full ) . * File System Format: Fat32, Readable By Windows, Mac & Linux Operating Systems * Data Format: Mini Seed ( With Companion Text Files Containing Station Data ) 40 Power: * Dc Charger Voltage Input Range 10-36 Vdc. * Consumption ( When Recording Continuous Data ) 1.1W * Runtime On Internal 12 V Battery 12 + Hours 41 Physical: * Housing Cnc Milled From Solid Alumimum, Hard Anodized. * Dust And Water Ingression Protection: Ip 67. * Operating Temperature Range ( Up To 100% R / H ) - 20 Deg. C To + 70 Deg. C * Size ( Excluding Connectors ) Ø 135Mm, 225Mm High * Weight ( Standard, With Internal Battery ) 3.1 Kg. 42 User Interface: * Configuraton Interface In-Built Lcd With 4-Line Text Display And 4- Button Input * Data Telemetry Ip Streaming Over Optional Ethernet Adaptor Or 3G Cellular Modem * Remote Set Up And Communications Via Live Stream Application Or Eqserver Web Interface 43 Connectors & Cables: * Power 2 Pin Circular Push / Pull Lock * On-Off Switch : External Push Button * Power Cable 2 M Length With Bare Wire Ends
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Contract Date: Ref. Documents Contract Value : 63.76 Lakh
Government Departments No of Bidders 3
29.
Defence #8761418 Technical Bid
Supply Of On Site Calibration Of Electrical Rf Instruments , Qty 1 Au:-1 Pulse Generator 2 Damped Sine Generator 3 Function Generator 200Mhz. 4 Signal Generator 10Mhz — 40Ghz 5 Signal Generator 9 Khz — 20 Ghz 6 Signal Generator 100 Khz —20 Ghz 7 Function Generator 8 Signal Generator 250 Khz — 40 Ghz 9 Signal Generator 100 Khz — 20 Ghz 10 Function Generator 80 Mhz 11 Esd Generator ( Gun ) & ( Rc Of 330 0 / 150 Pf & 500 0 / 500 Pf ) Resister & Cap Networks 12 Em Generator 13 Prog. Synthesizer 1 Hz — 2 Ghz 14 Linear Amplifier 15 Linear Amplifier 16 Power Amplifier 10 Khz — 250 Mhz 17 Power Amplifier 80 Mhz — 1000 Mhz 18 Power Amplifier 700 Mhz — 6 Ghz 19 Power Amplifier 6 Ghz — 18 Ghz 20 Preamplifier 20 Mhz — 18 Ghz 21 Power Amplifier 10 Khz — 400 Mhz 22 Low Noise Amplifier 1-18 Ghz, 39 Db 23 Spectrum Analyser 10 Hz — 30 Ghz 24 Vector Network Analyser 25 2 Channel Network Signal Analyser 26 Vector Signal Analyser 27 Signal Analyser 10 Hz — 20 Ghz 28 Hand Held Spectrum Analyser 1 Mhz — 20 Ghz 29 Spectrum Analyser 30 Em Power Meter Plug In Card 31 Em Power Sensor 9 Khz — 6 Ghz 32 Em Power Sensor 80 Mhz —18 Ghz 33 2 Channel Power Meter 34 Power Meter 35 Peak And Average Power Sensor 36 Cw Power Sensor 37 Em Sense Probe Control Laser 38 Electric Field Probes 10Mhz-40Ghz 39 Electric Field Probe 10Khz-1Ghz 40 Emi Receiver, 40 Ghz 41 Emi Receiver, 40 Ghz 42 Lecroy Oscilloscope 600 Mhz, 2.5Gs / S 43 Lecroy Oscilloscope 44 Lecroy Oscilloscope 100 Mhz, 1Gs / S 45 Lecroy Oscilloscope 46 Lecroy Oscilloscope 47 Tektronix Oscilloscope 100Mhz, 1.25Gs / S 48 Dso, 4 Ghz, 4 Gs / S 49 Power Supply, 36 V, 6 Amp 50 Measuring Scale 1 Meter ( For Measuring 1 Meter Distance ) 51 Site Anaizer 25- 6000Mhz 52 Mixed Oscilloscope 53 Mixed Oscilloscope 54 Mixed Signal Oscilloscope 55 Mixed Signal Oscilloscope 56 Mixed Signal Oscilloscope 57 Mixed Signal Oscilloscope 58 Dual Channel Digital Storage Oscilloscope 59 Dual Channel Digital Storage Oscilloscope 60 Mixed Oscilloscope 61 Signal Generator 62 Universal Power Meter Withsensor 80601 63 Signal Generator 64 Function Arbitary Wave Form Generator 65 Signal Generator 66 Esd Simulator 67 250Ms / S Waveform Generator 68 80Mhz Waveform Generator 69 Recorder 70 Timer / Counter / Anal Zer 71 P-Series Power Meter 72 With Power Senso 73 Oscilloscope 74 Mixed Signal Oscilloscope 75 Signal Generator 76 Mxa Signal Analyzer 77 Function Arbitrary Wave 78 Function Arbitrary Wave 79 Signal Generator 80 250Ms / S Waveform 81 Mixed Signal Oscilloscope 82 Oscilloscope 83 Signal Generator 84 Exa Signal Analyzer 85 Dual Channal Arbitrary 86 Dual Channal Arbitrary 87 Dual Channal Arbitrary 88 Rf Signal Generator 89 Power Supply 90 Exa Signal Analyzer 91 40Ghz Signal Generator 92 Psa Series Spectrum 93 Dual Channal Arbitrary 94 Signal Generator 95 Rf Signal Generator 96 Dual Channal Arbitrary 97 Psg Analog Signal 98 Esa-L-Signal Analyzer 99 Oscilloscope 100 Oscilloscope 101 Oscilloscope 102 Spectrum Analyzer 103 Counter / Power Meter / Dvb 104 Pan Serie Network 105 Arbitrary Generator 106 Network Analyzer 107 Cw Microwave Ferquency 108 Oscilloscope 109 Oscilloscope 110 Esg Dp Series Signal 111 Counter / Power / Met Er 112 Spectrum Analyzer 113 Handeel Power Meter 114 Handeel Power Meter 115 Esa-E-Series Spectrum 116 Oscilloscope 117 Syntesizer Signal 118 Spectrum Analyzer 119 Syntesizer Signal Generator 120 Spectrum Analyzer 121 Power Meter 122 Synthesized Signal Gen 123 Analog Signal Generator 124 Attenuator 125 Dc Power Supply 126 Frequency Response Analyzer 127 Dc Power Supply 128 Spectrum Analyzer 129 Spectrum Analyzer 130 Digital Phosphoroscope 131 Scope Ordwe 132 Mso 500Mhz 133 Mso1ghz 134 Rf Signal Generator 135 Oscilloscope 1Ghz 136 Dso 200 Mhz 137 Dso 200 Mhz 138 Dc Regulated Power Supply 139 Scope Coder 140 Digital Multimeter 141 Dc Power Supply 142 Dc Power Supply 143 Spectrum Analyzer 144 Spectrum Analyzer 145 Microwave Generator 146 Signal Generator 9K-30G 147 Frequency Response Analyzer 148 Arbitrary Function Generator 149 Signal Generator 100K-43.5G 150 Recorder 151 Digital Multimeter 152 Rf Power Meter 153 Rf Power Meter 154 Pulse / Microwave Frq Counter 155 Spectrum Analyzer 156 Frq Response Analyzer 157 Site Analyzer 158 Network Analyzer 159 Network Analyzer 160 Dc Powe Supply 161 Signal Generator 162 Esa-L Series Spec Analyzer 163 Synthesizer Signal Generator 164 Agilent Signal Analyzer 165 Attenuator 166 Network Analyser
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
30.
Defence #8734329 Technical Bid
Invitation Of Bids For Supply And Installation Of It Equipment For Implementation Of Data Centre Over Academic Lan At Ina, Ezhimala’ At Indian Naval Academy, Ezhimala, Kannur ( Dist. ) , Kerala - 2 Dc Site: Hci Rack Server Including License ( Perpetual ) With Support ( 24 Hour X 7 Days A Week ) With A Software Defined Storage Of 20 Tb ( Usable ) In Total. All Licensing Should Be Academic Licensing In The Name Of Indian Naval Academy ( Ina ) With Minimum Number Of Licences. Minimum 72 Physical Cores ( Minimum Usable 60 Cores ) Comprising All 03 Nodes, 2Ghz Processor Or Above, 256Gb Ram Per Node. 3 Dr Site: Hci Rack Server Including License ( Perpetual ) With Support ( 24 Hour X 7 Days A Week ) With A Software Defined Storage Of 20 Tb ( Usable ) In Total. All Licensing Should Be Academic Licensing In The Name Of Indian Naval Academy ( Ina ) With Minimum Number Of Licences. Minimum 36 Physical Cores Comprising All 03 Nodes, 2Ghz Processor Or Above, 128Gb Ram Per Node. 4 Witness / Management Node Having Fibre Connectivity ( 10G ) With Respective Os And Licenses As Per Hci Solution, Tower Type With Academic Licensing In The Name Of Indian Naval Academy ( Ina ) With Minimum Number Of Licences. 5 Windows Server 2016 R2 Os With License Down Gradable To 2012 R2 With Academic Licensing In The Name Of Indian Naval Academy ( Ina ) . 6 Network Monitoring Software With Perpetual Licensing For A Minimum Of 100 Switches And Nodes And Oem Support With Academic Licensing In The Name Of Indian Naval Academy ( Ina ) . 7 Dc Site And Dr Site: Core Switch 48 Port Sfp ( Supporting 40G / 25G / 10G / 1G ) Supporting Minimum Four 40G Uplink Per Core Switch. 8 40G Modules For Dc-Dr Core Switches. Single Mode. Minimum 03 Per Core Switch. 9 10G Modules For Dc And Dr Core Switches. Single Mode 10 10G Module For Dc And Dr Servers 11 10 G Module For Iscsi Connection To San Dell Emc Scv 3020. ( Multimode ) 12 1G Modules 1310 Nm For Connecting Dc-Dr Core Switches To Existing Switches. Single Mode 13 Backup Software With License To Backup Min 5 Vms To Existing Dell Nx3200 Nas Server With Academic Licensing In The Name Of Indian Naval Academy ( Ina ) . 14 Vcloud Suite Standard ( Perpetual ) Including Oem Support ( 24 Hour X 7 Days A Week ) For Hci Nodes With Academic Licensing In The Name Of Indian Naval Academy ( Ina ) And Minimum Licensing As Applicable. 15 Vcenter Standard ( Perpetual ) Including Oem Support ( 24 Hour X 7 Days A Week ) . All Licensing Should Be Academic Licensing In The Name Of Indian Naval Academy ( Ina ) And Minimum Licensing As Applicable. 16 Racks 42 U With Exhaust Fans, Horizontal And Vertical Cable Managers 1200M X 600M For Dc And Dr 17 Pdu Vertical Server Rack Type With 12 Ports For Dc And Dr 18 Dr: 10 Kva Ups With 6 Hr Backup At 80% Load With 5 Years Warranty 19 Liu - 48 Port, Fully Loaded With Pigtails 20 Liu - 24 Port, Fully Loaded With Pigtails 21 Liu - 12 Port, Fully Loaded With Pigtails 22 Patch Panel – 24 Port Loaded With Cable Manager 23 Cat 6A Utp Cable - White Colour 24 Cat 6A Utp Cable - Grey Colour 25 Rj 45 Jack For Cat 6A ( Pack Of 100 ) 26 12 Core Single Mode Os2 Gel Free Fibre Cable Armoured 27 48 Core Single Mode Os1 Fibre 28 24 Core Single Mode Os1 Fibre 29 Sc To Lc / Lc To Lc Sm Fibre Patch Cords 10M ( Liu To Switch Connection Between Racks ) 30 Sc To Lc / Lc To Lc Sm Fibre Patch Cords 2M ( Liu To Switch Connection Within Racks ) 31 Lc To Lc Sm Fibre Patch Cords 10 M ( For Server Rack To Switch Rack Connection ) 32 Lc To Lc Sm Fibre Patch Cords 2M ( Within Switch Rack ) 33 Nvr 32-Channel With 4Tb Hard Disk 34 Camera - Dome 2 Mp Or Above For Dc And Dr 35 Poe Switch – 8 Port For Dc And Dr 36 Five Star Rated Split Ac – 1.5T With Timer And Stabiliser. 37 Five Star Rated Tower Ac – 2T With Timer And Stabiliser 38 Temperature Sensor, Humidity Sensor, Smoke Sensor, Fire Alarm, Power Sensor, Emergency Lighting. ( 02 Sensors Each ) For Dc And Dr 39 Access Control Biometric Card Reader With Em Lock, Exit Switch, All Allied Accessories And 25 Nos Rfid Cards 40 Utm Firewall With Five Years Bundle Subscription ( Antivirus, Web Filter, Threat Detection, Url Filter, Application Filter ) With Analyser Preferably Academic Licencing For Ina. 41 Single Port I / O Boxes With Keystone And Faceplate 42 Fibre Optic Splicing Closures Min ( 6 In 1 Out ) 43 1U Kvm Console Usb Type With Min 8 Inputs With Inbuilt Display Compatible With All Server. 44 Isi Standard Conduit Pipes Min 25 Mm / 32 Mm 45 Casing And Capping 20 Mm 46 Distribution Box For Dc And Dr 47 Mccb Breakers For Dc And Dr 48 Industrial Socket 16A For Dc And Dr 49 Earthing Conductors For Dc And Dr 50 Dc / Dr Led Lighting 51 Virtual Migrations Of Ubuntu, Linux And Windows Servers From Existing Server Room To New Dc Including All Applications ( 08 Applications ) From Esxi 5.7 / 6.0 To Latest Version. 52 ( A ) Shifting Of All Network Infrastructure ( Racks, Liu Etc. ) From Old Server Room With Otdr Testing. Laying Of Overhead Rail For Network Cabling At Dc ( 20M ) Using Conduit Pipes / Cap And Case As Required With Marking Using Ferrules And Other Internal Cablings As Required At Dc And Dr. N ( B ) Fibre Laying Charges Between Dc And Dr ( 1800 M ) , Aryabhatta-414 To Bhaskara-315 ( 600M ) Including Route Marking, Splicing Fixing And Labelling N ( C ) Integrating Existing San Storage Dell Emc Scv 3020 As Internal File Storage Using Iscsi Protocol. N ( D ) Configuration And Testing Of Dc-Dr And Utm Firewall As Per Customer Requirement. N ( E ) Nud Lan Server Migration. N ( F ) Integrating Existing Nas Server Dell Nx3200 As Backup Solution Using Ethernet Protocol. 53 ( A ) Hardening Of The Existing Room With Fire Rated Wall Panels, Partitioning And Raised Floor And Nitrile Insulation For Dc And Dr. Installation Of Fire Rated Steel Door For Dc, Dr And Lighting For Dc And Dr. Painting Dc & Dr Paint To Restore The Interior Setup As Per The Surroundings With One Coat Of Primer And Two Coats Of Plastic Emulsion. The Shade For Inside And Other Areas Will Be Decided By The Buyer. Installation Of Gi Laying Tile Ceiling With Prelude Grid System N ( B ) Power Cabling With Proper Earthing From Breaker Panel To The Server Racks And Network Rack With Ups Distribution Board / Mcb For Individual Rack And Final Distribution Through Pdu / Mccb For Individual Racks. Integration Of Existing 40Kva Ups With Dc And Installation Of 10 Kva Ups At Dr Site With Wiring, Breakers And Allied Accessories. N ( C ) Installation And Configuration Of Access Control And Surveillance System For Dc And Dr. N ( D ) Installation And Configuration Of Environment Monitoring System With Temperature, Humidity And Smoke Sensor. 54 Comprehensive Amc Charges For All Active And Passive Components In The Entire Solution Implemented By The Vendor During 6Th Year Post Completion Of Warranty. 55 Comprehensive Amc Charges For All Active And Passive Components In The Entire Solution Implemented By The Vendor During 7Th Year Post Completion Of Warranty.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
32.
Rural Development #8523125 AOC
Tender For Regarding Supply Of Various Type Of Material /Goods At Grampanchayat Sakhali Bk. Taluka Buldhana District Buldhana , Pvc Cement Solvent / Pvc Solution For Pipe Line Work 1 Ltr , Swing Check Type Reflux (Non-Return) Valves For Water Works Purposes , Pvc Pipe 4Kg 75 Mm , Pvc Pipe 4Kg 90 Mm , Pvc Pipe 4Kg 120 Mm , Pvc Pipe 6Kg 75 Mm , Pvc Pipe 6Kg 90 Mm , Pvc Pipe 6Kg 120 Mm , Elbow For Pipe 4Kg 75 Mm , Elbow For Pipe 4Kg 90 Mm , Elbow For Pipe 4Kg 120 Mm , Coupling For Pipe 4Kg 75 Mm , Coupling For Pipe 4Kg 90 Mm , Coupling For Pipe 4Kg 120 Mm , T For Pipe 4Kg 75 Mm , T For Pipe 4Kg 90 Mm , T For Pipe 4Kg 120 Mm , Elbow For Pipe 6Kg 75 Mm , Elbow For Pipe 6Kg 90 Mm , Elbow For Pipe 6Kg 120 Mm , Coupling For Pipe 6Kg 75 Mm , Coupling For Pipe 6Kg 90 Mm , Coupling For Pipe 6Kg 120 Mm , T For Pipe 6Kg 75 Mm , T For Pipe 6Kg 90 Mm , T For Pipe 6Kg 120 Mm , Ferrule Cock 15 Mm (Brass) , Water Meter Single Jet Isi Mark 15 Mm Class B , Water Meter Double Jet Isi Mark 15 Mm Class B , Swiss Valve For 2.5 Pipe Line , Swiss Valve For 3 Pipe Line , Swiss Valve For 4 Pipe Line , Swiss Valve For 6 Pipe Line , Pvc Pipe Cid Joint For 2.5 Pipe Line , Pvc Pipe Cid Joint For 3 Pipe Line , Pvc Pipe Cid Joint For 4 Pipe Line , Pvc Pipe Cid Joint For 6 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 2.5 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 3 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 4 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 6 Pipe Line , Resilient Seated Cast Iron Single Air Relief Valves For Water Works Purposes , Resilient Seated Cast Iron Double Air Relief Valves For Water Works Purposes , Pvc Cement Solvent / Pvc Solution For Pipe Line Work 5 Ltr , U-Pvc Pipe 40 Mm , Elbow For U-Pvc Pipe 40 Mm , Coupling For U-Pvc Pipe 40 Mm , T For U- Pvc Pipe 4Kg 40 Mm , Stainless Steel Long Body Bib Cock Tap With Flange 40 Mm , O-Ring For U-Pvc Pipe 40 Mm Plane , Water Tank 4 Layer Food Grade 100 Ltr , Water Tank 4 Layer Food Grade 200 Ltr , Water Tank 4 Layer Food Grade 250 Ltr , Water Tank 4 Layer Food Grade 500 Ltr , Water Tank 4 Layer Food Grade 1000 Ltr , Water Tank 4 Layer Food Grade 1500 Ltr , Water Tank 4 Layer Food Grade 2000 Ltr , Water Tank 4 Layer Food Grade 2500 Ltr , Water Tank 4 Layer Food Grade 3000 Ltr , Water Tank 4 Layer Food Grade 5000 Ltr , Submersible Motor Pump 1 Hp , Submersible Motor Pump 2 Hp , Submersible Motor Pump 3 Hp , Submersible Motor Pump 3Hp Three Phase , Submersible Motor Pump 7.5Hp 5 Stage Three Phase , Submersible Motor Pump 7.5Hp 8 Stage Three Phase , Submersible Motor Pump 7.5Hp 10 Stage Three Phase , Submersible Motor Pump 7.5Hp 12 Stage Three Phase , Submersible Motor Pump 10.5 Hp 5 Stage Three Phase , Submersible Motor Pump 10.5 Hp 8 Stage Three Phase , Submersible Motor Pump 10.5 Hp 12 Stage Three Phase , Submersible Motor Pump 10.5 Hp 20 Stage Three Phase , Centrifugal Monoblock Pump Motor Pump 1 Hp , Centrifugal Monoblock Pump Motor Pump 2 Hp , Centrifugal Monoblock Pump Motor Pump 3 Hp , Centrifugal Monoblock Pump Motor Pump 3Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 5Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 6.5 Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 7Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 7.5 Hp Three Phase , Isi Mark Starter For 5 Hp Submersible Motor Pump , Isi Mark Starter For 12 Hp Motor Pump , Isi Mark Hdpe Pipe Roll For Sub. Pump In Borewell 50Mm X 4Mm X Per Meter , Isi Mark Submersible Cable Diameter 4 Mm Length Per Meter , Isi Mark Submersible Rope Yellow Borewell Submersible Pump Rope,Poly More Virgin And Braided Twisted Cord Twine Rope String (16 Mm,Per Meter Meter) , Auto Switch For Water Moter Starter Upto 12 Hp , Aluminium Armoured Power Cable-50 Sq Mm 3.5 Core , Clorine Dosing Machine Without Stand By System , Clorine Dosing Machine With Inbuilt Stand By System , 11 Ltr Dustbeen Pvc Without Leads , 15 Ltr Dustbeen Pvc Without Leads , 20 Ltr Dustbeen Pvc Without Leads , 35 Ltr Dustbeen Pvc Without Leads , 11 Ltr Dustbeenpvc With Lead , 15 Ltr Dustbeen Pvc With Lead , 20 Ltr Dustbeen Pvc With Lead , 35 Ltr Dustbeen Pvc With Lead , 11 Ltr Dustbeenpvc Swing Bin , 15 Ltr Dustbeen Pvc Swing Bin , 20 Ltr Dustbeen Pvc Swing Bin , 35 Ltr Dustbeen Pvc Swing Bin , 11 Ltr Dustbeenpvc With Pedal , 15 Ltr Dustbeen Pvc With Pedal , 20 Ltr Dustbeen Pvc With Pedal , 35 Ltr Dustbeen Pvc With Pedal , 20 Ltr Twinbin Pedal , 11 Ltr Dustbeensteel With Pedal , 15 Ltr Dustbeen Steel With Pedal , 20 Ltr Dustbeen Steel With Pedal , 30 Ltr Dustbeen Steel With Pedal , Dustbeen Rabbit Shape 10 Ltr , Dustbeen Rabbit Shape 15 Ltr , Dustbeen Rabbit Shape 20 Ltr , Dust Bin Big Double 110 Ltr Pvc With Stand , Dust Bin Big 110 Ltr Pvc , Dust Bin Big 120 Ltr Pvc , Dust Bin Big 100 Ltr Pvc With Wheel , Dust Bin Big 110 Ltr Pvc , Dust Bin Big 120 Ltr Pvc With Wheel , Dust Bin Big 240 Ltr Pvc With Wheel , Green And Blue Garbage Tri-Cyle Rickshaw , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Three Wheeler , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Four Wheeler , Refrigerator For Food Storage 50 Liters - 80 Liters Single Door , Refrigerator For Food Storage 150 Liters - 250 Liters Single Door , Refrigerator For Food Storage 250 Liters - 330 Liters Single Door , Refrigerator For Food Storage 350 Liters - 490 Liters Single Door , Air Condition 1 Ton 3 Star Split Inverter Ac , Air Condition 1.5 Ton 3 Star Split Inverter Ac , Air Condition 2 Ton 3 Star Split Inverter Ac , Air Condition 1 Ton 4 Star Split Inverter Ac , Air Condition 1.5 Ton 4 Star Split Inverter Ac , Air Condition 2 Ton 4 Star Split Inverter Ac , Air Condition 1 Ton 5 Star Split Inverter Ac , Air Condition 1.5 Ton 5 Star Split Inverter Ac , Air Condition 2 Ton 5 Star Split Inverter Ac , Desert Cooler Small , Desert Cooler Medium , Desert Cooler Large , Personal Cooler Small , Personal Cooler Medium , Personal Cooler Large , Led Tv 24 With Hdmi , Led Tv 32 , Smart Led Tv 32 , Android Led Tv 32 , Led Tv 40 , Smart Led Tv 40 , Android Led Tv 40 , Led Tv 42 , Smart Led Tv 42 , Android Led Tv 42 , Led Tv 50 , Smart Led Tv 50 , Android Led Tv 50 , Led Tv 55 , Smart Led Tv 55 , Android Led Tv 55 , Led Tv 75 , Smart Led Tv 75 , Android Led Tv 75 , Wall Mount Kit For Led Tv 24 Inch To 75 Inch , Installation, Labour Charges, Other Charges For All Type Of Tv , Led Screen 19.5 Hd , Lcd/Tft/Led Monitor For Pc - 17 Normal , Lcd/Tft/Led Monitor For Pc - 18 Normal , Lcd/Tft/Led Monitor For Pc - 18 .5 Normal , Lcd/Tft/Led Monitor For Pc - 19 Normal , Led Monitor For Pc - 19 Normal , Led Monitor For Pc - 19 Branded , Led Monitor For Pc - 22 Normal , Led Monitor For Pc - 22 Branded , Led Monitor For Pc - 22 Full Hd Branded , Led Monitor For Pc - 24 Full Hd Branded , Power Cable For Pc 1.5 Mtr , Power Cable For Pc 3 Mtr , Power Cable For Pc 5 Mtr , Power Cable For Pc 10Mtr , Vga Cable 5 Meter For Pc , Vga Cable 10 Meter For Pc , Hdmi Cable 1.5 Meter For Pc , Hdmi Cable 3 Meter For Pc , Hdmi Cable 5 Meter For Pc , Hdmi Cable 10 Meter For Pc , Surge Protector 1.5 Mtr , Surge Protector 3 Mtr , Surge Protector 5 Mtr , Surge Protector 10 Mtr , Aux Audio Cable 10 Mtr For Pc To Speaker , Projector Branded , Projector Un-Branded , Projector Celeing Mount Kit , Projector Screen Size 6X4 , Installation, Labour Charges, Other Charges For Projector , Elerning Syllabus Marathi Software Per Class (1 To 4) , Elerning Syllabus Urdu Software Per Class (1 To 4) , Elerning Syllabus English Software Per Class (1 To 4) , Elerning Syllabus Marathi Software Per Class (5 To 8) , Elerning Syllabus Urdu Software Per Class (5 To 8) , Elerning Syllabus English Software Per Class (5 To 8) , Elerning Syllabus Marathi Software Per Class (9 To 10) , Elerning Syllabus Urdu Software Per Class (9 To 10) , Elerning Syllabus English Software Per Class (9 To 10) , Training Charges For E Learning Software Per Sylabus , Pendrive 8 Gb , Pendrive 16 Gb , Pendrive 32Gb , Pendrive 64 Gb , Pendrive 128 Gb , Pendrive 256 Gb , External Solid State Drives:256 Gb , External Solid State Drives:512 Gb , External Solid State Drives: 1 Tb , External Solid State Drives: 2Tb , Mouse Usb Branded , Mouse Wire Less Branded , Keyboard Usb Branded , Keyboard Mouse Usb Combo Branded , Keyboard Mouse Combo Wire Less Unbranded , Keyboard Mouse Combo Wireless Branded , Speaker / Home Theater 4.1 , Speaker / Home Theater 5.1 , Trolley Spekar 12 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike , Trolley Spekar 18 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike , Trolley Spekar 8X2 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike Option For Two 6.35Mm Port For Mic And Tws Mode , Trolley Spekar 10X2 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike Option For Two 6.35Mm Port For Mic And Tws Mode , All In One Printer (Inkjet Technology Monochrome) With Adf , All In One Printer Lejer Jet All In One , Printer All In One [Print / Scan / Copy] Mini Xerox Machine , Printer All In One [Print / Scan / Copy] Colour-Ink Jet , Printer Only For Print Laserjet Monochrome , Printer Only For Print Inkjet Monochrome , Colour Printer Only For Print Inkjet , Computer System [C2d/2Gb/500Gb Hdd] , Computer System (C2d/2Gb/1Tb Hdd) , Computer System [Ci3 8 Gen 4Gb Ram,1Tb Hdd,20 Screen, ,Keyboard,Mouse] Branded , Computer System [Ci3 9 Gen 4Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 10 Gen 4Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 8 Gen 8Gb Ram,1Tb Hdd,20 Screen, ,Keyboard,Mouse] Branded , Computer System [Ci3 9 Gen 8Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 10 Gen 8Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , All In One Pc (Ryzen 3 Dual Core 4 Gb Ddr4/1 Tb/Windows 10 Home/23.8 Inch Screen) , All In One Pc (Intel Pentium Core/ 4 Gb Ddr4/1 Tb/Windows 10 Home/23.8 Inch Screen) , All In One Computer Systembranded[Core I3,4Gb Ram,1Tb Hdd,,19To 24 Led] , All In One Computer System Branded[Core I5,4Gb Ram,1Tb Hdd,19 To 24 Led, Dos Wifi,Web Cam,Keyboard,Mouse] ] , All In One Computer System Branded[Core I3,4Gb Ram,1Tb Hdd,,19 To 22 Led, Dos Wifi,Web Cam,Keyboard,Mouse] ] , All In One Computer Systembranded[Core I5,8Gb Ram,128 Ssd, 1Tb Hdd,,27 Led,Windows 10 Wifi,Web Cam,Keyboard,Mouse] , All In One Computer Systembranded[Core I5,8Gb Ram,1Tb Ssd,,27 Led,Windows 10 Wifi,Web Cam,Keyboard,Mouse] ] , Ups For Computer System , Dvr 16Ch + 1Ip 2.4Mp , Dvr 16Ch [5 Mp Supported 2Ip Camera Supported] , Dvr 8Ch 2.4Mp Supported , Nvr 8 Ch([5 Mp Supported Ip Camera Supported] , Nvr16 Ch([5 Mp Supported Ip Camera Supported] , Surveillance Internal Hard Drive 4Tb , Surveillance Internal Hard Drive 2Tb , Surveillance Internal Hard Drive 1Tb , Dome Camera 2.4Mp , Bullet Camera 2.4Mp , Dome Camera 2.4Mp Ip Cam , Bullet Camera 2.4Mp Ip Cam , Bnc Connector , Power Connector , Power Supply 20Amp , Cctv Cable Bundle , Ip Camera 2.4 Mp , Poe Switch For 8 Ch , Poe Switch For 16 Ch , Poe Splitter For Ip Camera , Cat6 Cable Per Mtr , Pipe 10Ft Unit For Cctv Setup , Iron Wire In Kg (Min 300Ft) , Hook Packet , Labour Charges For Feeting Of Cctv Equipements , Ceiling Mount Kit For Cctv , Hevy Chairs For Kids , Baby /Kids Chair , Computer Wheel Chair , S Type Chair Non-Revolving And Non-Tilting Chair With Armrest , Office Chair Full Back Wheel , Office Chair Half Back Wheel , Office Chair Mid Back Wheel , Portable Foldable Wheelchairs For Handicap , Fiber Chair , Fibre Chair With Cushion Normal , Round Table With Chair Set , Three Seatervisitor Bench-Metal , Cement Bench For Park , Iron Patient Hospital Basic Examination Table , Wooden School Benches And Desks, Seating Capacity: Double 01 To 04 , Wooden School Benches And Desks, Seating Capacity: Double 5 To 8 , Wooden School Benches And Desks, Seating Capacity: Double 9 To 12 , Office Table 3X6 Feet , Office Table 2.5X5 Feet , Office Table 2X4 Feet , Office Table 2X3 Feet , Office Table Executive , Table Top Glass Thickness 12Mm Sqr Per Feet , Table Top Cloth( Velvet Quilted Cloth, Gsm 150) Per Meter , Table Name Plate( Clear Acrylic 2-Sided V-Shaped Desktop Sign Display Stand Name Plate 2 X 8 Inch) , Office Cupboard 6.5 Feet Steel/Iron , Office Cupboard 5.5 Feet Iron , Office Cupboard 4.5 Feet /Iron , Office Cupboard 6.5Ft With Locker , Industrial Locker Steel Almirah - 8 Locker Number Of Compartments , Book Rack4 Shelves Paint Coated Iron Almirah Bookshelf , Basics Storage Rack 7 Shelf 118X12x36 Inch Udl , Basics Storage Rack 6 Shelf 118X12x36 Inch Udl , Basics Storage Rack 5 Shelf 118X12x36 Inch Udl , Basics Storage Rack 4 Shelf 118X12x36 Inch Udl , Celeing Fan 1200 Mm , Table Fan 16 Inch , Pedestal Fan 16 Inch , Wall Mount Fan 400 Mm , Steel Bucket 10 Ltr , Steel Bucket 15 Ltr , Steel Bucket 20 Ltr , Fiber Bucket 10 Ltr , Fiber Bucket 15 Ltr , Fiber Bucket 20 Ltr , Permenant Marker Pen Box 10 Nos , Sticky Notes Paper Flag 15Mm X 76Mm Multicolour , Stapler Big Size Half Strip All Metal , Stapler Pin Big Pin Size 24/6 Pin Box , Stapler Medium Size Half Strip All Metal , Regular Pin 10 No Not Stapler Pins Box , Paper Punching Machine Small Size , Paper Punching Machine Medium Size , Paper Punching Machine Big Size , Ice Pick(Tocha) , A4 Size Paper Rim Single Psc 65 To 70 Gsm , Legal Size Paper Rim Single Psc 65 To 70 Gsm , Stamp Pad,110 X 69 Mm Small , Stamp Pad 155 X95 Mm Large , Stamp Ink Bottel 25 Ml Voilet/Red/Black , Butter Flow Ball Pen Single Pcs , Gripper Pen Single Pcs , Acrylic Name Plate Size 10X24 Inch , Acrylic Name Plate Size 60X90 Inch , Calculator 112 Step Check And Correct 12 Digit , Glass Paper Weights (Set Of 1, Multicolor) , Cotton Paper Tag, Red Advocate Paper Tie Tags 50 Pieces , File Cotton Laces, (22 Inch Long Each,50 Piece) , Plane Register 1 Quire Set On 1 Piece , Plane Register 2 Quire Set On 1 Piece , Plane Register 3 Quire Set On 1 Piece , Plane Register 4 Quire Set On 1 Piece , Spring File - Fullscape, Multicolour,(Normal File) 1 Piece , Tep Finest Paper File Record File (High Quality File) 1 Piece , Cardboard Box Files 1 Piece , Head Pins Fine Satin Pin Craft Single Box 100 Pcs , Glue Stick 5G , Glue Stick 15G , Gum - Lime 50 , Paste Gum Bottle 100Ml , Paste Gum Bottle 200Ml , Gum - Lime, 200Ml Bottle , Paste Gum Bottle 300Ml , R O Can 20 Ltr , Ro 12 Ltr With Storage Tank With Feetings And Nessesory Parts , Ro 15 Ltr With Storage Tank With Feetings And Nessesory Parts , Ro 25 Ltr With Feetings And Nessesory Parts , Water Cooler 60 Ltr With Two Tap Capasity , Water Cooler 80 Ltr With Two Tap Capasity , Water Cooler 120 Ltr With Two Tap Capasity , Curtnes Per Sq Mtr , Carpate Per Sqr Ft As Per Requirement , Chappal / Shoes Stand , Mat For School Kids 26 Pcs Set , Satranji 10X20 , Satranji 10X15 , Satranji 6X9 , Printed Plastic Floor Mat, Mat Size: 6 X 9 Feet , Bhojan Patti 1.5X 6 Floor Mat , 36 Pieces Alphabet & Number Floor Mats , Mirror Plastic Frame Mirror , Led Light 15 Watt , Led Light 18 Watt , Led Light 20 Watt , Pendent Lam Holder , Led Tubelight - 20W , Led Street Light 40 Watt , Led Street Light 30 Watt , Led Street Light 25 Watt , L Shape Pipe For Led Street Light , Clamp For L Shape Pipe Streetlight And Pole , All In One 9W Solar Street Light With Pole And Installation , All In One 15W Solar Street Light With Pole And Installation , All In One 18W Solar Street Light With Pole And Installation , All In One 25W Solar Street Light With Pole And Installation , All In One 25W Solar Street Light With Decorative Pole With Simple Light And Installation , All In One 25W Solar Street Light With Decorative Pole With Round Shape Of Single Arm And Light With Installation , All In One 25W Solar Street Light With Decorative Pole With Round Shape Of Two Arm And Light With Installation , Wire 1.5 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Wire 2 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Wire 2.5 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity 1 Kva With Installation , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity 2 Kva With Installation , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity3 Kva With Installation , Grid Connected Rooftop Solar System 1Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 2 Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 3 Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 5 Kw Solar System With Installation And Other Charges Are Included , Solar Unit Complete Set With Installation For Anganwadi/School [Fan X 1, Led Bulb X 1 With Fitting & Installation] , Solar Unit Complete Set With Installation For School/Anganwadi/ Office [1 Computer, Fan,2Light,] , Solar Unit Complete Set With Installation [ Fan X 4, Pc X 1, Light X 4, 1Hr Backup With Fitting & Installation]] , Solar Hi Mast Complete 1 Set Of 20 Watt , 50W Spv Solar Combo Including 12V/40Ah Artheon Battery With Installation , Solar Pump 7.5 Hp With All Accessories, Solar Mono Pv Panels And Installation , Inverter 1225 (12V) For Office Ups, Assorted, Standard Isi Mark , Isi Mark Inverter Tubular Battry , Fogging Machine Branded Single Blor , Fogging Machine Un-Branded Single Blor , Sanitary Pad Vending Machine , Sanitary Pad Disposal , Sanitary Pad Product Dimensions: ?21 X 7.3 X 13 Cm Per Nos , Sanitary Pad Extra Long ?Product Dimensions ?23.5 X 9.2 X 13 Cm Per Nos , Custome Face Mask , 3 Ply Face Mask , Ppe Kit , Plastic First Aid Kit With Medicines , Steel/Metal First Aid Kit With Medicines , Baby Rediant Heat Warmar , Stethoscope , Human Body Weight Machine Digital , Baby Weighting Machine Digital , Baby Weight Slater , Digital Infrared Thermometer Gun , Digital Thermometer , Finger Tip Puls Oximeter , Fully Automatic Digital Blood Pressure Monitor , Analog Blood Pressure Monitor , All In One Steam Vaporizer Machine , Hemoglobin Digital Monitor , Sterile Surgical Glove 6-Inch Pre-Powdered-Box Of 50 Pairs , Compressor Nebulizer , Blood Glucose Monitor , 25 Test Strips Glucometer , Electrical Needle Syringe Destroyer , Manual Hub Cutter , Infantometer , Mortuary Cabinet Freezer Single Person/Body , Mortuary Cabinet Freezer Double Person Body , Bleaching Bag 25 Kg , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Iron Patient Hospital Bed Manual Dimension: 3 X 6 Feet , Steel Folding Cot Iron Frame , Laptop Office Bag Multicolour Leather P.U. Office Bag , Rechargeable Led Bulb 9Watt , Rechargeable Ultra Led Torch 0.5 Watt , No Dust Broom Xl , Ceiling Cleaning Broom , Pochha With Bucket , Dust Pan Fibre , Dust Pan Ss/Metal/Iron , Vacuum Cleaner Wet And Dry 1150-Watt , Thermos Stoneware Tea Kettle Set 1000 Ml , Cup And Soucer And Tea Set , Rack For Medicine , Magazine Stand Revolving , Plastic Jar For Water 2 Ltr , Sliding Glass Notice Board 60 X 90 , Sliding Glass Notice Board 90 X 180 , Plastic Mug For Home And Bathroom 1.5Litre , Vehicle Mountable Fogging Machine Operated Electrical Double Blor , Vehicle Mountable Fogging Machine Operated Electrical Single Blor , Commercial Slide Ladder , Presentation Dias Stand Made-Up Stainless - Steel Color Royal Red - Height 4 Ft X 1.5 Ft Width. (For Offices, School, Public Speech & Conferences) , Presentation Dias Stand Made-Up Wooden Width - 61 Cms, Depth - 45 Cms, Height - 123 Cms. Material - Engineered Wood, Laminated Board. Colour - Two-Tone , Photo With Frame Standard Size For Office , Stadiometer (Height Measuring Scale For Adults And Children) , Blanket , Pvc Floor Covering Carpets Width : 1.5 Meter Thickness 0.65, To 1.00 Mm Designs : Mat Finish (Enter Rate In Per Square Meter) , Pvc Floor Covering Carpets Width : 2 Meter Thickness 0.65, To 1.00 Mm Designs : Mat Finish (Enter Rate In Per Square Meter) , Hand Wash Station Foot Operted 1 User With Pvc Water Tank 200 Ltr , Hand Wash Station Foot Operted 2 User With Pvc Water Tank 200 Ltr , Hand Wash Station Foot Operted 3 User , Hand Wash Station Foot Operted 4 User , Automatic Sanitiser Dispenser Machine , Alcohol Based Hand Sanitizer 5 Ltr Can , Alcohol Based Hand Sanitizer/ 500 Ml Sprey Bottle , Alcohol Based Hand Sanitizer 100 Ml Sprey Bottle , Alcohol Based Hand Sanitizer 50 Ml Sprey Bottle , Sodium Hypochlorite 50 Kg Can , Jeevan Drop 100 Ml Bottel , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Iron Patient Hospital Bed Manual Dimension: 3 X 6 Feet , Aluminum Grain Storage Container 100 Kg Capacity , Aluminum Grain Storage Container 50 Kg Capacity , Grain Storage Tank 20 Kg , Water Jar 2 Ltr Capacity Steel , Water Jar 2 Ltr Capacity Pvc , Aluminium Kadai 8 Ltr , Gas Bhatti Single Burner , Gas Bhatti Double Burner , Stainless Steel Round Kitchen Baskset , Aluminium Pot Heavy Patila/Rice Boiler Tope No 18 (10L) Tope 10 L Capacity 26 Cm Diameter , Aluminium Pot Lead For Patila/Rice Boiler Tope No 18 26 Cm Diameter 10L , Water Tank 18 Ltr Steel , Plate Pawbhaji Style , 5 Layer 30 * 30 Inch Wall Mount Modern Kitchen Utensils Dish Rack , Pressure Cooker 5 Ltr , Pressure Cooker 10 Ltr , Pressure Cooker 12 Ltr , Pressure Cooker 14 Ltr , Pressure Cooker 22 Ltr , Ss Milk Can/Oil Can 2 Ltr , Aluminium Pot Heavy Patila/Rice Boiler Tope No 18 (25L) Tope 25 L Capacity 26 Cm Diameter , Aluminium Pot Lead For Patila/Rice Boiler Tope No 18 26 Cm Diameter , Stainless Steel Serving Spoon For Rice Boiler , Stainless Steel Kitchen Pincers/Sandshi/Pakkad , Water Pot/Handa/Beda 10 Ltr Steel Food Grade , Stainless Steel Parat, Material Grade: 202 Size 28 , Stainless Steel Bowl/Vati , Donga Spoon , Spoon Serving Ss To Cqa Steel Sarata , Stainless Steel Serving Tray Large Size , Serving Tray Set Of 3 , Tea Spoon , Break Fast Spoon , Ss Water Glass Standard Size , Chalni/Stainer For Grain , Steel Plate , Chapati/Roti/Papad Manual Maker Press , Stainless Steel Storage Containers With Lead , Capacity: 5Kg , Stainless Steel Storage Containers With Lead , Capacity: 10 Kg , Stainless Steel Storage Containers With Lead , Capacity: 15 Kg , Stainless Steel Storage Containers With Lead , Capacity: 20 Kg , Stainless Steel Storage Containers With Lead , Capacity: 25 Kg , Tople Steel , Tople Plastic/Fibre , Wagrale , Belan Polpat , Iron Kadhai 150 Litre , Aluminium Patila Big 110 Ltr , Stainless Steel 2 Burner Gas Stove, Manual Ignition , Strainer Steel Frying Spoon , Mixer Grinder 550 Watts With 3 Multi Ouroose Grinding Jars , 1.5 Hp Table Top Atta Chakki Mini Flour Mill , Magnetic Sticks Puzzle Game For Kids (36 Pcs) , Interactive Fruit Cutting Game 8-Piece , Tower Block Game , Kids Kitchen Set Game , Rocker Horse/Elephant /Etc Ride On Toy , Fruit Set Multicolour , Abcd Slate And Block , Building Abcd Name , Carrom With Coin, Striker,And Powder , Bat Ball Without Stumps For Kids Up To 12 Year Kids Plastic , Bat Ball With Stump For Kids Up To 12 Year Kids Plastic , Badminton Racket Set Of 2 Bat , Badminton Shuttlecocks 10 Psc Box , Skipping Rope Adjustabe Hights For Kids , Skipping Rope Adjustabe Hights With Counting System , Handcrafted Wooden Indian Traditional Lagori , Teddy Rings - 7 Rings , Magic Speed Rubics Cube Size 2.5 Cube , Standard Cotton Swing , Babys Tricycle (Multi -Colour 86X64x33 Cm, 1-3 Years) , Soft Foam Cricket Bat With Ball For Kids O To 8 Yrs , Vegetable Set, Multi Color , Racket Set With Ball & Shuttlecock For Kids Plastic Table Tennis Set , 12Pc Big Size Animal Kids (12 Pcs Big Animal Set) , Flying Disk For Kids Game 03 To 06 Yrs , Hula Hoop Ring - Multicolour For Kids , Flash Card 9.5 Cmx 1375 Cm Set Of 5 Pcs , Small Board Book Set Of 5 - English - 2 To 5 Year Set Of Five As Per Requirement , Building Block For Kids ,42 Pcs Bag Packing (Multicolour) , Play Ball Set Medium Multicolour Set Of 10 Balls , Play Ball Big Size Set Multicolour Set Of 6 Balls , Abcd/Education Chart 5 Pcs Set 65X55 Cm Aprrox Size , 3D Alphbets Learning And Drawing Book , Magic Slate (Multicolor-Digital Slate Lcd E-Writing Board Electronic Notebook Graphic Tab With Pen) , Basket Ball For Kids , Side Drum Steel 14 Inch With Belt, Stick And 2 Fiber Sheet Free , Thap Dhol Ss,17.2 Inch , Lezim Instruments Standard Size , Wooden Dumbbells For Pt 1 Set , Tennikoit Ring Dotted & Plain(Pack Of 6) , Mrudung / Mridangam , Nickel Plated Handmade Musical Iron Tabla Set , Wooden Standard Harmonium Harmonium , Handmade Jhanjh , Piano Portable Keyboard 61 Keys , Professional Flutes C Sharp Medium Right Hand Bansuri Size 18.5 Inches , Cricket Bat Cricket For Kids 6 To 12 Year Wood , Cricket Ball For Kids 6 To 12 Year , Cricket Stumps For Kids 6 To 12 Year Wood , Cricket Bat Cricket For Kids 12 To 16 Year Wood , Cricket Bat Standard Size , Cricket Tennis Ball Standard Size Box 6 Pcs , Cricket Stumps Standard Size 6 Nos , Foot-Ball Standard Size , Foot-Ball Net Standard Size , Volleyball , Volleyball Net , Kho-Kho Pol Pair Standard Size Wood , Chess Board With Coin , Tent House Jumbo Big Size , Doll House & Accessories For Girls Age 3Y+ , Doll House Playhouse Playset , Doctor Set Kids Game , Toy Counting Frame Plastic , Puzzle Set , Seasaw Toy , Slide , Swing Car L76xw35x48 Approx , Wooden Block Set , Foot Basic Sewing Machine , Frp Indoor Merry Go Round , Outdoor Merry Go Round , Dholki Small For Kids Playing 3 To 12 Yrs , Park Metal Single Swing 10 Feet , Park Metal Double Swing 10 Feet , Park Metal Slide 9 Feet , Magical Handwriting Workbook Pen And Refills , Nursery Board Book , Easy Copy Colouring Book With 12 Shades Wax Crayons , Kids Painting Set , Adjustable 3-In-1 Plastic Swing For Kids With Rope And Accesorries , Dart Game With 2 Dart Pin , Alpha Numeric Plastic Leeter World -Educational Toys , Flash Cards Learning & Education Game , 6 Puzzle Board , Interactive Board , Black Board 4X6 , White/Green Board 3X4 , White-Green Board 4X6 , Writing Chalk Multi Colour 50 Chalk Sticks In The Box , Writing Chalk White Or Single Colour 50 Chalk Sticks In The Box , White Board Marker Pen- Box 10 Nos , Tablet 4 G Sim Supported (10.1) Hd , Mobile 4 G Supported , Mega Phone , Nail Cutter For Kids , Paydan , Round Dust Bin Metal [Blue + Green With 2.5Ft Stand] , Wall Watch Big Size , Fibre Toilet Single User -1 Unit , Fibre Toilet Double User -2 Unit , Fibre Toilet Four User -4 Unit , T-Shirt [24 Number,Pp Cloth] , T-Shirt [26 Number,Pp Cloth] , T-Shirt [28 Number,Pp Cloth] , T-Shirt [30 Number,Pp Cloth] , T-Shirt [32 Number,Pp Cloth] , Lower [24 Number, Sp Cloth] , Lower [26 Number, Sp Cloth] , Lower [28 Number, Sp Cloth] , Lower [30 Number, Sp Cloth] , Lower [32 Number, Sp Cloth] , Shoes & Socks For Boys,Girls 1 Number , Shoes & Socks For Boys,Girls 2 Number , Shoes & Socks For Boys,Girls 3 Number , Shoes & Socks For Boys,Girls 4 Number , Shoes & Socks For Boys,Girls 5 Number , Soft Cotton Washcloths, Napkin, Hankies For Baby , Baby Gift Kit Items Included In The Gift Pack:As Per Technical Sheet , 5 Annual Periodical Maintenance Cable Wire 1 Bundle 80 Meter , 16 Annual Periodical Maintenance Cable Wire 1 Bundle 80 Meter , 5 Annual Periodical Maintenance One Way Electrical Switch , 5 Annual Periodical Maintenance Two Way Electrical Switch , 16 Annual Periodical Maintenance One Way Electrical Switch , 16 Annual Periodical Maintenance Two Way Electrical Switch , 5 Annual Periodical Maintenance Plug Socket 3 Pin , 16 Annual Periodical Maintenance Plug Socket 3 Pin , Fan Regulator Dimmer Switch , 16 Annual Periodical Maintenance Mcb Switch , 32 Annual Periodical Maintenance Mcb Switch , Mcb Swich Box -4 -Door , Mcb Swich Box -8 -Door , Mcb Swich Box -12 -Door , Mcb Swich Box -18 -Door , 16 A Modular Electrical Switch Board, Module Size: 2, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 4, Ip65 , 16 A Modular Electrical Switch Board, Module Size:6, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 8, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 12, Ip65. , 16 A Modular Electrical Switch Board, Module Size: 14, Ip65 , 16 A Modular Electrical Switch Board, Module Size:16, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 18, Ip65 , Dry Soybeans Organic Soybean Seeds 1 Kg Packing(Mahabeej Or Govt A Approved By Nsc,Sfci , Swami Vivekananda Jivan Charitra Motivational Biography Book Marathi , Rashtramata Jijau Charitra Marathi , Bhartache Sanvidhan The Constitution Of India Marathi , Sanskardeep Shraddha Prakashan Marathi Book , Mazi Atmakatha, Autobiography Of Dr. Babasaheb Ambedkar Marathi Book , Lokraja Shahu Maharaj - Vyaktittva Aani Vichar Marathi Book , Yugpravartak Shivaji Maharaj Yanche Charitra Marathi Book , Kalika -V.S. Khandekar Marathi Book , Shyamchi Aai Marathi Book , Ase Ghadale Dr. A.P.J. Abdul Kalam - Marathi Book , Jhansi Chi Rani Laxmi Bai Marathi Book , Rangatdar Goshti Book Set Of (Red,Brown, Yelow,Green,Blue,Pink And Purple Clour Set) Navneet Set Of 7 Books , Hitopadesh Set Of 4 Books Navneet , Gosti Ashya Majach Maja Set Of 4 Book Navneet , Chatur Birbal Set Of 5 Books Navneet , Air Walker Single Out Door Gym , Air Walker Doudle For Out Door Gym , Shoulder Press Single For Out Door Gym , Shouler Press Double For Out Door Gym , Chess Press Single For Out Door Gym , Chess Press Double For Out Door Gym , Horizatial Bar For Out Door Gym , Abdominal Exercise Double For Out Door Gym , Eliticipal Trainer Single For Out Door Gym , Eliticipal Trainer Double For Out Door Gym , Rowing Machine For Out Door Gym , Cycle For Out Door Gym , Sit And Stand Twister For Out Door Gym , Triple Twister For Out Door Gym , Leg Press Double For Out Door Gym , Parallel Bar For Out Door Gym , Surf Board For Out Door Gym , Dipping Bar For Out Door Gym , Bench Press For Out Door Gym , Cross Walker For Out Door Gym , Knee Chair For Out Door Gym , Steeper And Twister For Out Door Gym , Shoulder And Chest Press For Out Door Gym , Horse Rider For Out Door Gym , Leg Stretch For Out Door Gym , Usb Rechargeable Electric Gas Lighter For Kitchen Gas Stove , Rod 4 Feet Zig Zag Indoor Gym , Rod 5 Feet Regular Indoor Gym , Rod 1 Feet Regular Indoor Gym , Standard 28Mm Rubber Weight Plates Indoor Gym , Dumbels Rubber Coated Olympic Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One Indoor Gym , Leg Curl / Leg Extension Indoor Gym , Bicep Curl Machine Indoor Gym , Adjustable Squat Rack Stand Material Alloy Steel Indoor Gym , Calf Muscle Machine Product Indoor Gym , Stepper With Riser For Indoor Gym , Gym Dumbbell Rack Material Iron, Indoor Gym , Weight Plates Storage Rack For Gym Material ? Indoor Gym , Yoga Mat Indoor Gym , Hbnc Kit For Asha Worker Including Including 9 Items As Per Bom , Multicolour-4K, Matte Vinyl Stickers Educational Rate Per Sq Feet Special Repair No Item Name & Its Technical Specification , Dvr 8/16Channel [Min 2.0Mp(1080P),8Ch Turbo Hd Dvr,H264,H264+ & Dual Stream Video Compression,Hd-Tvi,Support Ahd,Analog Camera With Adaptive Access,Rj45,Usbx2,Mouse Support,Upto 6Tb Hdd Support] , Dome Camera [Lance 3.6Mm,1080P,0.01 Lux @F1.2,0 Lux With Ir, True Day, & Night,,Ir Distance 20 Mm,Dc 12V,4W Max] , Bullet Camera [Lance 3.6Mm,1080P,0.01 Lux @F1.2,0 Lux With Ir, True Day, & Night,,Ir Distance 20 Mm,Dc 12V,4W Max] , Hard Disk For Dvr [Capacity Min 2Tb,Sata6.0Gb/S,Min7200 Rpm, Waranty Min 2Yr] , Cable Bundle [Minimum 80Mtr,Copper 3+1,Min 22Gadge] , Bnc Connector Copper [Screw Adjustable] , Power Connector Copper [Screw Adjustable] , Cctv Fitting Labour Charges [Cctv Cable Fitting,Dvr Installation,Camera Installation] , Power Supply [Min 12Volt,10Amp] , Led Display Screen [Size :19.5 Inch (49.5Cm) Hd (1600X900)Tn Panel, Vga Port,Dsiplay Port,Aspect Ratio: 16:9,Brightness (Typical):250Cd/M,Voltage :120Volts,Wattage:15Watt,Waranty Min 1 Year] , Projector [Projector Brightness: 300 Ansi Lumens Projection Technology: Dlp Projector Native Resolution: Wxga (1280X800) Contrast Ratio (Typical): 2200:1 Native Aspect Ratio: 16:10 Screen Size Compatibility: 36.2 - 362.7 Projection Distance: 1.2 - 10 M Service Life Of Lamp: 3000 Hbulb Power: 260 W Service Life Of Lamp (Economic Mode): 5000 H Throw Ratio: 1.28 -1.536 Ceiling Mount : Optional Accessory, Sold Separately Carrying Case : Optional Accessory, Sold Separatelywarranty : 5 Years For Product, 1 Year For Bulb] Mfg Warranty , Projector Screen [Supports Ultra Hd, 3 D And 4 K Technology, Spring Action Mechanism, Autolock/Instalock Mechanism, You Dont Need To Hook The Screen At The Bottom To Stop Size: - 6 Feet (Width) X 4 Feet (Height), In 4:3 Format, 84 Inches/7 Feet Diagonal Length, Comes With 1.2 Gainapprox.Keeps Your Eyes Strain Free While Viewing, Comes With Anti Uv Coating To Protect Eyes, A+++++ Grade Fabric, Ideal For Presentations, Meeting Rooms, Home Cinema.Comes In Imported Easy To Clean Super High Gain Fabric/Material, Black Coated Screen Material From Back Side Eliminates Light Penetration For Superior Color Reproduction, Complimentary Four Side Black Masking Borders Enhances Picture Contrast,.] , Led Tv 40 Inch Hd Ready (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1) Minimum 3 Year Warranty , Smart Led Tv 40 Inch Hd Ready- Smart Tv Minimum Android Version 4.4, Cpu- Minimum Dual Core 1.2 Ghz Storage Min. 4 Gb, Built In Wifi (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1), Pc Audio In , Ypbpr,Lan,Tf Slot,Audio Out, Spdif Out)- Minimum 3 Year Warranty , Led Tv 32 Inch Hd Ready (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1) Minimum 3 Year Warranty , Smart Led Tv 32 Inch Hd Ready- Smart Tv Minimum Android Version 4.4, Cpu- Minimum Dual Core 1.2 Ghz Storage Min. 4 Gb, Built In Wifi (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1), Pc Audio In , Ypbpr,Lan,Tf Slot,Audio Out, Spdif Out)- Minimum 3 Year Warranty , Speaker System 4.1 [Min Specifications: Usb + Fm+Sdcard, 1 Main Unit,4 Speaker,1 Remote,1 Audio Cable] , Trolley Speaker Small With Wireless Mic Nos -2:: Technical Specifications Wireless Bluetooth Trolley Speaker Digital Karaoke,Treble And Bass Independent Adjustment Professional Treble And ; Bass Gain Controlling Circuit Built-In Professional Wireless Microphone System Built-In Mp3 Encoding Support Connection Type:Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Micin Compatible With Dvd/Pc And Other Sound Source Intelligent Power Switch Charging Circuit User Friendly Trolley 8 Meters Operating Range , Upto 4.5 Hours Of Playback Total Output 60W Rms Controls: Sound, Mode And Track Controls Two Wireless Mics And ; Remote Included In Box Subwoofer Size : 12 Inch , Trolley Speaker Medium With Wireless Mic Nos -2: Wireless Bluetooth Trolley Speaker . Digital Karaoke,Treble And Bass Independent Adjustment Professional Treble & Bass Gain Controlling Circuit Built-In Professional Wireless Microphone System Built-In Mp3 Encoding Support Connection Type:Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Micin Compatible With Dvd/Pc And Other Sound Source Intelligent Power Switch Charging Circuit User Friendly Trolley 8 Meters Operating Range , Upto 4.5 Hours Of Playback Total Output 80W Rms Controls: Volume, Mode And Track Controls Two Wireless Mics & Remote Included In Box Subwoofer Size : 15 Inch , Trolley Speaker Large With Wireless Mic Nos -2:Wireless Bluetooth Trolley Speaker , Total Output 120W Rms Treble And Bass Independent Adjustment Connection Type: Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Mic In Compatible With Dvd/Pc And Other Sound Source User Friendly & Sturdy Adjustable Trolley With Digital Led Display 10 Meters Operating Range Controls: Volume, Mode And Track Controls Two Wireless Mic. Full Function Remote Subwoofer Size : 18 Inches & Tweeter 8 Internal & External Battery Support , Ups 600Va [Minimum Specifications :Capacity:600Va/360W,Nominal Voltage:230Vac,Output Voltage :230Vac,Battery:12V/7Ahx1,Bkp Time:10-15Mins,Max Net Weight :4.2Kg] , Wall Mount Kit Compatible For 32 Tv , Elerning Syllabus Software [Animated With Sound] , Computer System All In One [Cel Quad Core,4Gb Ram, 1Tb Hdd,20 Screen] , Computer System Cpu [Dual Core,2Gb Ram,160Gb Hdd] , Keyboard [Port : Usb, Type:Standerd,Keys Minimum:104] , Keyboard [Wireless , Type:Standerd,Keys Minimum:104] , Mouse [Port :Usb, Type:Optical,Keys :Minimum :03] , Mouse Wireless Type:Standerd,Keys Minimum:104] , Power Cable 1.8Meter For Pc , Vga Cable 1.8 Meter For Pc , Surge Protector [Minimum 4 Port,1 Fuse] , Training Charges , Installation, Labour Charges,Other Charges , Cricket Bat [5Number Full Size,Kashmir Willow] , Rubber Ball [Hevy Tennis] , Rubber Ball [Light Tennis] , Stump Set (3Qty)[Full Size, Kashmir Willow] , Rubber Ring [Regular Plane] , Badmintan Racket Set [Regular] , Football [5Number, Waterproof] , Flying Ring [Fibre,Size:Regular] , Hoops Ring [Fix] , Lagori Set [Lagori Set, Wooden] , Lagori Ball [Lightweight, Rubber] , Skip Rope [Plastick Handle, Rubber Rope,1Mtr] , Hollyball[5Number,Waterproof] , Hollyball Net[Cotton,14Mesh] , Single Slide Min 3Ft , Double Swing , Single Seasaw [Gf-70A, 6] , Toys Installation Charges , Office Chair [High Back)Product Dimensions: Length (21 Inches), Width (21 Inches), Height (48 Inches) Primary Material: Leatherette Color: Black, Style: Modern Adjustable Seat Height Tilt Mechanism Nylon Wheels , Office Chair [Medium Back)Product Dimensions: Length (20 Inches), Width (20 Inches), Height (41 Inches) Primary Material: Leatherette Style: Modern Adjustable Seat Height Tilt Mechanism Nylon Wheels , Office Chair Fibre Product Dimensions: Length (61 Cm), Width (61 Cm), Height (89 Cm) Style: Modern Stylish, Modern And Sturdy Chair Wide Seat With Arm Rest For Comfortable Sitting Experience Suitable For Indoor As Well As Outdoor Distinct Design For Backrest , Fogging Machine [Black Stone] , Educational Wall Chart Set (5Pcs, Animal, Abcd, Number,Fruits,Vegitables) , Height Charts [Ph6031 W20 X H47] , Animal Set [Ph1400] , Fruit Set [Ph8001+Ph8000] , Rocker Toy [Pgs401/F L36 X W13 X H18] , Rideon [Pgs1404 L28.7 X W10 X H20.5] , Mani Slate [Ph155 Counting Frame] , Tedy Ring [Min 5Ring Set] , Plastic Ball Big , Flying Ring [Ph160,D21.5] , Playball Set [Min 50Pcs,Min D6.6Cm Pgs601] , Two Way Essel Board [Pgs 701 L28 X W24 X H42] , Grain Storage [Capacity Min 50Kg , All In One Printer- Main Input Tray 150 Sheets Of Regular Weight 75 G/M2 (20-Lb Paper )Priority Feed Slot 10 Sheets Of Paper Up To 163 G/M2 (43 Lb) Top (Face Down) Output Bin 100 Sheets Of Regular Weight 75 G/M2 (20-Lb Paper )Output Bin60 To 105 G/M2 (16 Lbsto 28Lbs ) Print Speed14 A4 Pages Per Minute (Ppm), 15 Letter-Size Ppm First Page Out In As Low As 8 Seconds Print Resolution Fastres 600: This Setting Provides 600 Dpi Effective Output Quality. Fastres 1200: This Setting Provides 1200 Dpi Effective Output Quality. Economode: Text Is Printed Using Less Toner. Duty Cycle 8,000 Single-Sided Pages Per Month (Maximum) 1,000 Single-Sided Pages Per Month (Average) Power Consumtionas Per Fcc Compliance , Suppluing And Erecting Street Light Fitting Suitable To 30W Lamp, Including Lamp, With Pf0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete As Per Specification No Fg-Odf/Fls2 Item No.2-9-3 , Suppluing And Erecting Mains With Isi Mark Wp 2 X 4 Sq.Mm. 1100V. Grade Aluminium Pvc Insulated And Pvc Sheathed Wires On G.I. Bearer Wire No. 8 Swg Complete Erected With Required Size Of Porcelain Reel Insulators And 16 Swg Gi Binding Wire , Ro Water Filter 25 Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 50Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 100 Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 200Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Water Tank 4 Layer Tank 500 Ltr , Water Tank 4 Layer Tank 1000 Ltr , Non-Electric Water Purifier It Boasts Of Electro Adsorption Technology (Eat) Based Filter Which Gives The Power Of 4 Filters In One Physical Filter. Water Is Passed Through A 5 Stage Purification Process I.E. One Pre-Filter And 4 Filters Under Eat. The Filter Is Self-Serviceable I.E. We Can Change It Ourself When It Is Required. The Natural Essential Minerals Are Maintained In The Water Thus Giving Us Clean And Healthy Water. This Water Purifier Doesnt Waste Water. Tank Capacity: 6 Litres Flow Rate: 1 Litre Per Minute Life Of Eat Filter: 12 Months 2-Year Warranty And Even Works Under Low Water Pressure Conditions. Non-Electric , Electronic Infant, Baby Weighing Scale Conformity To Indian Standrad, Is:9281-3 (1981) Part I,Ii, Iii & Part Iv (Latest) Yes Bis Marked Yes Display Led Battery Backup True Speed Of Measurement 5 Second Class Type Class-Iii Rated Load/ Capacity(Kg) 20 Kg Backup Time(Hour) 12 Internal Calibration True Power Requirement Mains Operated Battery Operated Battery Type Rechargeable Type Of Sensing Element Load Cell Warranty In Years 1 Tare Provision Manual Number Of Display Single Type Of Electronic Weighing Machine Electronic Infant Weighing Scale Resolution(Gms) 10 G Dc Operating Voltage In Volts 6 Volt Power Supply Single Phasepan/ Platform Size 550 Mm X 300 Mm , Weighing Scale Bis Marked Yes Conformity To Indian Standrad, Is:9281-3 (1981) Part I,Ii, Iii & Part Iv (Latest) Yes Rated Load/ Capacity(Kg) 150 Kg Battery Type Non-Rechargeable Tare Provision Automatic Internal Calibration True Backup Time(Hour) 10 Display Led Power Requirement Battery Operated Type Of Electronic Weighing Machine Electronic Personal Weighing Scale Warranty In Years 1 Number Of Display Single Speed Of Measurement 5 Second Dc Operating Voltage In Volts 6 Volt Power Supply Single Phase Resolution(Gms) 50 Gm Class Type Class-Iii Battery Backup True Type Of Sensing Element Load Cell Pan/ Platform Size 300 Mm X 300 Mm , First Aid Box Dressing Kit Is A Blister Pack With Rigid 3 Chamber Tray Made Of Hard Film Of Min 500 Micron Thicknesses To Provide The Strength While Being Used As A Container The Other Side Should Be Packed With A Medical Grade Paper, With The Thermal Sealing Min 7 Mm Or More As Per International Standard In Easily Peelable Pouch Yes Capacity 30 Milliliter Sterlity Of The Ready To Use Kit Sterile Utility Single Use - Disposable Items In The Kit No Of Gauze Of Different Sizes, 12 Ply, British Pharmacopoeia 17 Type, With All Margins Infolded So That No Loose Thread Is Visible On The Edges 5 No Of Gauze Balls Folded Nicely By Machines Without Any Loose Fibre 5 No Double Teeth Tweezer Made Of Fibre Glass And Polypropylene To Ensure The Adequate Strength In Holding The Articles 1 No Of Non Woven Sheets Of Different Sizes With Excellent Liquid Barrier Properties 1 No Of Dressing Pads Of Different Sizes Highly Absorbable Inner Cellulose Layer Completely Sealed In Nonwoven Covering To Hold The Liquid Inside The Pad And Avoid Seepage 1 No Of White Hand Towels, Made Of Wood Pulp Paper , Tds Meter Type Microprocessor Based Display Led / Lcd / Touch Screen, 3 Digits Calibration Up To 3 Points With Auto Buffer Ph Range (Ph) 0.00 To 14.00 Accuracy (Ph) +- 0.05 Corrosion Resistant Yes Power Requirements 230 V +- 10, 50 Hz Ac Modes Ph Mv- C Parallel Temperature Indication Yes Temperature Compensation Type Automatic Temperature Accuracy (Degree C) +- 0.3 Temperature Compensation Range (Degree C) 0 To 100 Resolution (Ph) 0.01 Operating Humidity: Rh In (%) 0 Operating Temperature (Degree C) -1 , Click Scanner Document Book Scanner Type Table Top (Without Computer And Display Screen) Technology Digital Camera Scanning Image Sensor Chip Ccd Embedded Pc Configuration If Applicable No Size Of Touch Screen Diagonally , If Applicable (Cm) No Glass Plate To Provide Flat Images Not Available If Available, Shape Of Glass Plate Flat Movement Of Glass Plate Manual Number Of Digital Cameras 1 Scan Area (Book Size When Open) A3 Maximum Book Thickness (Mm) 125 Optical Resolution (Dpi) 200 Scan Speed (Sec Per Scan) 1 Processing Time / Cycle Time (Scanning + Image Processing + Storage) (Seconds) 10 Buffer Memory (Mb) 8 Light Source Na Scan Mode (Colour Format) Colour / Black & White / Gray Scale Optical Zoom No Book Holder / Cradle Flat Bed,Manually Adjustable V-Shaped Cradle,Motorized V-Shaped Cradle,Inverted V-Shaped Glass Platen,Folder Mode Book Position During Scanning Face-Down On Flat Bed With Book Edge Working Mode (Page Turning) Manual Scanner Inter Face: (Computer Connection To Scanner Nil Network Interface (Gigabit Fast Ethernet With Tcp/Ip) No Applications Programming Interface (Api) Nil Output Formats Nil Supported Operating Systems Window 10 Image Processing Abilities Nil Overall Dimensions (Lxwxh)(Mm X Mm X Mm) 100X1000 Net Weight (Kg) 1 Max Power Requirements (Watt ) 60 Operating Temperature (Degree C) 45 Operating Humidity (% Rh) 42 Availability Of Test Reports From Central Govt/Nabl/Ilac Accredited Lab Showing Conformity To The Specifications (Test Reports Are To Be Furnished When Demanded By Buyer) Yes If Yes,Test Report Number Na If Yes,Test Report Date Na If Yes,Name Of Test Lab Na If Yes,Address Of The Test Lab Na Free Installation, Commissioning And Demonstration Yes On Site Oem Warranty (Year) 1 , All In One Printer =Minimum Technical Specification Machine Type Mono Laser All-In-One Available Functions Print, Copy And Scan Printer Print Speed Up To 18 Ppm (A4) Printing Method Monochrome Laser Beam Printing Print Quality Up To 1200 X 600 Dpi With Automatic Image Refinement Print Resolution 600 X 400 Dpi First Print Out Time 7.8 Secs Printer Languages Ufrii-Lt Print Margins 5 Mm-Top, 6 Mm- Bottom, 5 Mm-Left And Right Toner Saver Mode Yes Copier Copy Speed Up To 18 Ppm (A4) First Copy Output Time (Fcot) Approx. 12 Seconds Or Less Copy Resolution Up To 600 X 600 Dpi Copy Modes Text, Text/Photo, Text/Photo+, Photo Multiple Copy Up To 9 Copies Reduction / Enlargement 50-200% In 10% Increments Toner Saver Mode No Other Features 2 On 1, Id Card Copy Scanner Type Colour Scan Resolution Optical: Up To 600 X 600 Dpi Enhanced: Up To 9600 X 9600 Dpi Colour Scanning Depth 24 Bit/24 Bit (Input/Output) Greyscales 256 Levels Compatibility Twain, Wia Max. Scan Width 216 Mm Media Handling Scanner Type Flatbed Paper Input (Standard) 150-Sheet Tray Paper Output 100-Sheet Media Types Plain Paper, Heavy Paper, Recycled Paper, Transparency, Label, Envelope, Index Card Media Sizes Tray: A4, B5, A5, Executive, Envelope (Com10, Monarch, Dl, B5, C5), Ltr, Lgl, Statement, Custom Sizes: Width 76 X 216 Mm; Length 127 X 356 Mm. Media Weights Tray: 60 To 163 G/M² Interface & Software Interface Type Usb 2.0 Hi-Speed Operating System Compatibility Windows 7/2000/ Xp/ Vista Mac Os X Version 10.4.9 - 10.7.X¹linux² Software And Printer Management Scanning Tolls General Features Duty Cycle Max. 8,000 Pages Per Month¹ Warm-Up Time Approx. 10 Seconds From Power On Memory64 Mb Control Panel 1 Digit Led Operating Environment Temperature: 10 To 30ºc (50 To 86ºf) Humidity: 20 To 80% Rh (No Condensation) Power Source 220-240 V (±10%), 50/60 Hz (±2 Hz) Power Consumption Maximum: Approx. 960W Active: Approx. 450W Sleep Mode: Approx. 1.4 W Typical Electricity Consumption (Tec): 0.6 Kwh Noise Levels Sound Power Active: 65.3Db Or Less, Standby: 43.0Db Or Less Sound Pressure Active: 50.4Db, Standby: Inaudible Consumables Cartridges Cartridge 725 (1,600 Pages¹)² , Bio Metric Attendance Recorder Machine Specification Type Embedded Linux Based Biometic Attendance System Screen Size (Inch) 3 = N 5 Screen Resolution (Pixels) 800 X 480 Processor Speed (Mhz) 800 Ram (Gb) 1 Internal Storage (Gb) 4 Usb Port (Numbers) 1 Micro Usb Port Yes Battery Back Up Yes Network Connectivity Lan(Ethernet) Interface Only Mifare Card Support Yes Gprs Yes Internal Speakers Yes Queue Throughput (Number Of People To Mark Attendance Within One Minute) (Number) 20 Stqc Certified Biometric Identification Device Single Fingerprint Scanner Operational Endurance 24 X 7 Device Casing Material Polycarbonate Casing Thickness (Mm) 157 Ingress Protection Ip 65 Api/Sdk Stqc Uidai Certified Register Device (Copy Of The Certificate To Be Furnished , If Demanded By The Buyer) Yes Finger Placement The Fingerprint Scanner Should Be Ergonomically Placed To Support Ease Of Usage For Biometric Attendance In Standing Posture Of The User Drop Test Compliance For Casing From A Height Of 1 Meters No Drop Test Compliance For Casing From A Height Of 2 Meters No Separate Charging Non Usb Port Availabilty With Ac Adaptor Yes Rohs Compliant Certificate Yes Bis Under Crs Of Meity Yes Bis Registration Number Na Type Test Certificate Covering All Parameters And Environmental Tests From Stqc Certified Lab No If Yes ,Ttc Number And Date Na If Yes ,Name Of The Lab Na If Yes ,Address Of The Lab Na On Site Oem Warranty 1 , Steel Almarih /Kapat Without Lockers Conformity To Indian Standard Is:3312 Latest True No Of Shelves (Nos) 4 Type Of Shelves Fixed Locker Provided False Cloth Hanging Provision In The Almirah False Number Of Doors (Nos) 2 Door Stiffner Upto Full Door Height Provided With The Almirah Doors True Umber Of Hinges With Each Door (Nos) 3 Construction Welded Lock Three Way Bolting Device Controlled By Lock Material Material M.S Sheet Conforming To Commercial Quality Cr- 1,Grade 340 Of Is 513:2008 (Reaffirmed 2013)(Fifth Revision)Amdt. No.1 Material Of Almirah Doors M S Sheet Sheet Thickness Of Locker 0.8 Mm Sheet Thickness Of Door In Mm 0.8 Mm (Minimum) Sheet Thickness Of Sides,Back , Top And Bottom 0.8 Mm (Minimum) Sheet Thickness Of Shelves 0.6 Mm Sheet Thickness Of Pedestal In Mm 0.8 Mm (Minimum) Material Of Lock Brass And Steel Finish Material Of Keys Steel Dimension Height (Without Pedestal) (In Mm) (+/- 10 Mm) 1855 Width In Mm (± 7 Mm) 910 Millimeter Depth In Mm (±5 Mm) 430 Millimeter Inside Height Of Locker In Mm (± 5 Mm) N.A Inside Width Of Locker I Mm (±5 Mm) 910 Mm Inside Depth Of Locker In Mm (±5 Mm) 430 Mm Width Of Stiffner In Mm (±5 Mm) 115 Mm Thickness Of Ms Sheet Of Stiffner (In Mm) 0.6 Mm Stiffened Pedestal Height In Mm (±2 Mm) 120 Pedestal Width In Mm (±2 Mm) 70 Colour & Finish Finish Synthetic Enamel Colour Of Paint As Per Work Order Packing: Gutta Packing , 80 Kg Home Gym Indoor Package:(Rubber Plates) Of 20 In 1 Bench With 3Ft Curl And 5Ft Plain Rod, Gym Accessories And Dumbbell Rods 80Kg Pure Rubber, Weight 10Kg X 4Pcs 5Kg X 4Pcs 3Kg X 4Pcs 2Kg X 4Pcs 20 In 1 Bench (Features: Incline, Decline, Flat, Leg Curl And Leg Extension, Chest Press/Butterfly, Lat Pull Down, Ground Pulley, And Dips, Arm Curl) 3Ft Curl Rod And 5 Ft (25Mm) Plain Rod One Pair Of Dumbbell Rods, Hand Gripper, Hand Gloves And Skipping Rope , Weight Lifting Bar -4 Feet Utility Men Mass Of Bars 20 Kg ( Men ) Length Of Bar 1220Mm ( Men ) Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Weight Lifting Bar -5 Feet Utility Men Mass Of Bars 20 Kg ( Men )Length Of Bar 1524Mm ( Men )Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Weight Lifting Bar 7 Feet Utility Men Mass Of Bars 20 Kg ( Men ) Length Of Bar 2200Mm ( Men ) Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Dumbels Rod 1Foot Heavy Duty Workout Bars/Dumbbell Rods Length:-14Inches Material:-Steel Rod With Plastic Firm Hold Grip Nickel Electroplated To Protect It From Corrosion 14Inches Rods X2pcs. + Locks To Hold Plates 4Pcs , Dumbels Plate 2.5Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 5 Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainersbest Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 7.5 Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 10Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dips Stand 1Par X450 Easy-Dismantle, Convenient And Portable, Foam Handles Suitable For Power Push Up Training With Daily Use You Can Achieve To Narrow The Abdomen, Hips, Chest While Strengthening Your Upper Abdomen, Chest Shoulder And Triceps, Biceps Suitable For Home Use And Travelling Taking Comes In Compact Design And Ergonomic Handles For A Comfortable And Secure Grip , Bench Press Multy Purpose 6 Versatile Positions Flat, Incline And Decline (F.I.D Bench) Strong Tubular Metal Frame Makes This Machine Extra Sturdy Chip Resistant Frame Coated With Epoxy Powder Easy Self Assembly Required (Full Manual Included) , Garbagecar/Ghantagadi Type Of E Cart Fully Electric, Battery Operated Motor Driven For Carrying Bins Colour Of E Cart Green And Bluethe E Cart Must Fabricated From Good Quality Steel Properly Painted To Avoid Rusting For More Than 5 Years, Yes Name And Grade Of Steel From Which E Cart Body Framed Crca Steel Kerb Weight Of E- Cart (Kg) 370 Kilogram Garbage Carrying Capacity (Kg) 310 Kilogram Run Distance (For A Full Charge Of Battery , To Be Tested With Full Load At Maximum Ais-040 )) (Km) 120 Number Of Bins 2 Capacity Of Individual Bins In Litres (Ltrs) 249 Liter Type Of Chassis For E Cart Monocoque Pressed Section Ground Clearance As Per Is : 9435 (Mm) 180 Wheel Base (Mm) 935 Millimeter Turning Radius (Mm) 1698 Millimeter Power Transmission From Motor Shaft To Wheels Direct Mounting Please Specify The Mechanical Mechanism Otherwise Put Na Na Type Of Battery As Per Ais-048 Lead Acid , Ev Grade , Tubular Deep Discharge Capacity Of The Battery Approved By Icat/Arai (Ah) 100 Battery Voltage ,Nominal (Volts) 48V Maximum Overall Dimensions Of The Battery ( L X Wx H ) (Mm3) 400X170x210 Nominal Filled Weight Of The Battery (Kg) 29.7 Kilogram Motor Controller ( Must Suitable For Starting, Accelerating, Ecelerating, Driving , And Stopping Of E Cart Availabile Battery Charger 220/230 V Nominal Input Voltage , High Efficiency Type Charging Current (A) 15 Type Of Motor Brushless Dc Motor Motor Output Power ,48V/60V At Full Load (Watt) 1209 Overall Efficiency Of The E Cart ( To Be Tested At Full Load With Maximum Speed As Per Concerned Ais Standards (%) 85 Gradeability Of E-Cart , ( To Be Tested At Full Procedure As Per Ais -003 Load (Degree) 75 Certification Vehicle Certification Arai If Vehicle Certification From Others Agency ,Name Of The Agency Otherwise Put Na Arai Vehicle Certification Number And Date Aalb 0283 1 Sep 2016 Constructional Seating Facility For Driver Only Length Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.69 Width Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct, 2014 (Meters) 0.987 Height Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.695 Dimensions Of The Cabin Provided For Bins (Mm X Mm X Mm) (Mm3) 1328X986x356 Size Of Front Tyre (Mm) 3.00-12 Size Of Rear Tyre 3.00-12 Brake Type (Front) Drum Brake Type ( Rear ) Drum Suspension System (Front) Shock Absorbers With Compression Spring Suspension System ( Rear ) Leaf Spring And Hydrolic Reverse Gear Facility Yes The Mounting Of Batteries Yes Vehicle Lighting System Lcd Based Instrument Panel Containing Speedometer And Battery Charging Indicator Yes Glass Windshield With Wiper Motor As Approved By Icat/Arai Yes Battery Make As Per Ais :048:2009 , Kachara Gadi /Hand Trolley (Collecting Garbage) Collection Conforming To Indian Standard Is 4184: 1967: Latest For Two Wheels Type Wheel Barrowproduct Isi Marked No Cm/L Number Na Nominal Capacity Of Wheel Barrow 110 Liters (Two Wheel Type Wheel Barrow) Material Used For Manufacture Steel Sheets (Steel Sheets Shall Be Not Less Than 1.60 Mm In Thickness, And Shall Conform To Is : 1079 ) Type Of Chassis Frame Any Other Suitable Steel Section, Such As Flat Of Size 30 X 6 Mm Wheel Material Ms With Solid Rubber Tyre Minimum Diameter Of The Axle / Spindle (Mm) 25Minimum Nominal Width Of Tyre (Mm) 50 Minimum Diameter Of The Wheel (Mm) 300 Minimum Bearing Length Of Axle/Spindle 25 Mm At Each End Type Of Bearing / Bush Cast Iron Maximum Clearance Between The Bearing And Axle (Mm) 0.5 Finish Of Metal Parts Other Finish Finish Other Than Two Coats Of Black Bituminous Paint And Galvanised Yes Availability Of Test Report From Nabl/ Ilac Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification. Yes , Garden Bench Governing Specification Surface Mount Reinforcement Bench Conforming To Rdso Specn. (Item No. 172020 Of Ussor) Design Conforming To Drawing No. Rdso/Wks/2014/3 Date : 07.11.2014 Technique Compaction Technique And With Reinforcement Conforming To Govng. Specn. Hair Basisscope Of Supply Scope Of Supply Includes Erection And Installation Of Precast Concrete Reinforce Benches With Backrest Construction Of Bench With Concrete Mix Design - Reinforcement Steel - Connections - And Paint Members Of Bench Reinforced Cement Concrete Base Support And Planks Installation Each Seating Plank ( Bottom ) Of Bench Bolted With Leg By Help Of 12 Mm Dia. X 65 Mm Length Galvanized Steel Countersunk Bolts With Eva Washer - Backrest Planks Fitted With Half Threaded Carriage Bolts And Nuts Of Size 165 Mm X 8 Mm Dia With Eva & Steel Washer Material Concrete Mix Design M-30 Grade Concrete Mix In Accordance With Is : 10269/Latest In Gray Cement By Using Vibro - Compaction Technique And With Reinforcement As Detailed In Govng. Specn. Reinforcement Steel Tmt Reinforcement Bars Conforming To Is : 1786/Latest Of Dia 10 Mm Used As Main Reinforcement Bar And 4 Mm Dia Mild Steel Bars Used As Stirrups As Per Drawing Tirrups Details 10 Nos. - 4 Mm Dia Bar @ 150 Mm C/C Main Reinforcement Bar 4 Nos. - 10 Mm Dia Bar Adequate Clean Concrete Cover 15 Mm Minimum Material For Connecting Seating Plank With Leg 12 Mm Dia X 65 Mm Long Galvanized Steel Countersunk Bolts Confmg. To Is : 1367 / Latest With Eva Washer Material For Connecting Back Rest Plank With Leg Half Threaded Carriage Bolts And Nuts Of Size 165 Mm Length X 8 Mm Dia With Eva And Steel Reinforced Cement Concrete Planks Using M-30 Grade Gray Cement Mixed With 3 % Red Pigment Dimension , Inverter With Battry Inverter Governing Specification Generally Conforming To Is:13314 Rating In Kva & Min. Vah Capacity Of Battery 2 Kva/8640 Vah Technology Mosfet-Pwm Energy Star Rating 5 Star Trolley With Trolley Type Of Battery Tubular Battery Confirming To Is:13369 Backup Time (Minutes) Minimum 180 Minutes Constructional Thickness Of Sheet For Trolley (In Mm) Minimum 1.2 Trolley Material Crca Steel Type Of Enclosure Crca Steel Thickness Of Sheet For Enclosure ( In Mm) Minimum 1.2 Inverter Shall Have By Pass Facility Yes Functional Total Harmonic Distortion /=5% Input Single Phase Sine Wave(120 To 260 V) Output Single Phase Sine Wave 230 V Inverter Efficiency (%) /=87% Overload Time (In Minutes) /=10 Overload Of Rated Load (In %) /=10 Protection Battery Cut-Off Voltage To Protect From Overdischarge (In Volt) 10.5 Degree Of Protection Ip 21 Metering And Indications The Inverters Shall Be Provided With Output Voltage And Current Meters Conforming To Is 2419 : 1979 And Of An Accuracy Class Not Inferior To 2.5 In Accordance With Is 1248 : 1983 Yes Certifications Availability Of The Type Test Report From Central Govt. /Nabl/Ilac , Types Of Lead Acid Of Battery Stationary Cells And Batteries, Lead Acid Type (With Tubular Positive Plates) Conforming To Is:1651/1991 Nominal Voltage Of Battery (Volts) 12.0 Volt Material Of Container Polypropylene Batrry 150 Ted Capacity At C20 Discharge (Ah) 200 Warranty (Years) 1 Year Battery Condition Charged Constructional Dimensions (L X W X H) (Mm X Mm X Mm) As Per Relevant Is Specifications Volume Of Electrolyte (Ml) 5000 Weight Of Dry Battery (Kg) Shall Be As Per Relevant Is: Specn., Corresponding Ah Yes. No.Of Cells Per Battery (No.) 6 Cells For 12 Volt Battery , Air Cooler Large General Features For Rooms Up To (Mt.3 *) 142 Engg. Plastic (Blower / Fan) Double Blower Tank Capacity (Up To Brim- L) 110 Remote Control N/A Auto Louver Movement Yes Cool Flow Dispenser Yes Empty Tank Alarm Yes Cooling Media Hybrid Mosquito Repellent Yes Electronic Humidity Control Yes Air Throw Distance (Mt) 7 / 24 Natural Mode Yes Sleep Mode Yes Off Timer Yes Fully Closable Louver Yes Automatic Horizontal Louver Yes Automatic Vertical Louver Yes Ergonomic Handle Of Easy Movement Yes Easy Removable Cooling Pads Yes Voice Assist Yn/A I-Pure Technology Yes Wattage 230V / 50Hz 205 Product Dimensions (Mm) Length 763 Breadth 430 Height 1235 Carton Dimensions (Mm) Length 810 Breadth 450 Height 1275 I-Pure Technology Smell Filter Yes Bacterial Filter Yes Allergy Filter Yes Uvc Germicidal Yes Pm2.5 Wash Filter Yes , Air Cooler Medium General Features For Rooms Up To (Mt.3 *) 127 Engg. Plastic (Blower / Fan) Fan Blower/Fan Diameter (Mm) 358 Speed Control 3 Tank Capacity (Up To Brim- L) 70 Remote Control No Auto Louver Movement Yes Cool Flow Dispenser Yes Empty Tank Alarm No Cooling Media Honeycomb I-Pure Technology Yes Wattage 230V / 50Hz 205 220V / 60Hz 350 110V / 60Hz 365 Product Dimensions (Mm) Length 635 Breadth 500 Height 1125 Carton Dimensions (Mm) Length 600 Breadth 475 Height 1175 Product Weight (Kgs) 14.9 Product Weight Incl. (Pack) (Kgs) 18.8 No Of Units Per 40Ft Container (Hc) 188 I-Pure Technology Smell Filter Yes Bacterial Filter Yes Allergy Filter Yespm2.5 Wash Filter Yes , Air Cooler Small General Features For Rooms Up To (Mt.3 *) 71 Engg. Plastic (Blower / Fan) Double Blower Tank Capacity (Up To Brim- L) 55 Auto Louver Movement Yes Cool Flow Dispenser Yes Cooling Media Aspen Air Throw Distance (Mt) 7 / 24 Automatic Vertical Louver Yes Ergonomic Handle Of Easy Movement Yes Easy Removable Cooling Pads Yes Wattage 230V / 50Hz 205 Product Dimensions (Mm) Length 763 Breadth 430 Height 970 Carton Dimensions (Mm) Length 810 Breadth 450 Height 1010 , Air Condition 1 Ton Split Inverter Ac Capacity (Watts) 3440 Energy Efficiency (Iseer) 5.2 Moisture Removal (L/Hr) No Noise Level (Indoor High/Low) No Compressor Type Invertor Power Consumption 830 Watts Voltage No Auto Restart Yes On Timer Yes Off Timer Yes Dehumidification No Sleep Yes Swing Yes Remote Control Yes (Lcd) Indicators Yes Indoor Unit Size (W X D X H) Cm 84.5 X 18.0 X 27.5 Outdoor Unit Size (W X D X H) Cm 82 X 30 X 54 Indoor Unit Weight (Kg) 12.5 Outdoor Unit Weight (Kg) 33 Warranty 1 Year On Functioning And 10 Year On Compressor 5 Year Condenser Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Air Condition 1.5 Ton Split Inverter Ac Capacity (Watts) 5000 Energy Efficiency (Iseer) 4.9 Moisture Removal (L/Hr) No Noise Level (Indoor High/Low) No Compressor Type Invertor Power Consumption 1350 Watts Voltage No Auto Restart Yes On Timer Yes Off Timer Yes Dehumidification No Sleep Yes Swing Yes Remote Control Yes (Lcd) Indicators Yes Indoor Unit Size (W X D X H) Cm 94 X 20 X 29.8 Outdoor Unit Size (W X D X H) Cm 85 X 40 X 59 Indoor Unit Weight (Kg) 16 Outdoor Unit Weight (Kg) 39 Warranty 1 Year On Functioning ,10 Years Compressor Warranty & 5 Years Condenser Warranty Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Air Condition 2 Ton Split Inverter Ac Capacity: 2 Ton Rating: 5 Star Iseer: 4.9 Capacity: 2 Ton(S) Bee Rating: 5 Star Ac Type: Split Usage: Office Warranty: 3 Year(S) Features: 7 Years Compressor Warranty, Auto Mode, Copper Condenser And Connecting Pipe, Dry Mode, Environment-Friendly R410a Efrigerant Timers: Yes Auto Restart: Yes Sleep Mode: Yes Remote Control: Yes Active Carbon Deodoriser: Yes Catechin Filter: Yes Color: White Dimension: 800X300x690 Weight: 45 Cooling Capacity (Watts): 6155 W Power Input (Watts): 1784 W Copper Condenser 7 Years Compressor Warranty Eco-Friendly Refrigerant Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Color Printer Printer Type - Ink Tank; Functionality - All-In-One (Print, Scan, Copy) , Scanner Type - Flatbed; Printer Output - Colour Connectivity - Usb This Printer Comes With 2 Extra Bottles Black Ink In The Box, In Addition To 1 Each Of Cyan, Yellow, Magenta And Black Pages Per Minute - 33 Pages (Black & White), 15 Pages (Colour) ; Cost Per Page - 7 Paise (Black & White), 18 Paise (Colour) - As Per Iso Standards Ideal Usage - Home And Small Office, Regular / Heavy Usage (More Than 300 Pages Per Month) Page Size Supported - A4, A5, A6, B5, C6, Dl ; Duplex Print - Manual ; Print Resolution - 5760 X 1440 Compatible Ink Bottle - T6641 (Black), T6642 (Cyan), T6643 (Magenta), T6644 (Yellow) ; Page Yield - 4500 Pages (Black & White), 7500 Pages (Colour) Warranty - 1 Year , Supplying Installing Testing & Commissioning Solar Street Light Pole Comparing Of 9 W Led Fitting 12 V Min Ah Maintanance Free Lithium Battry Box Weatherproof Mounted On 75/80 Mm Brackets Foundation Earthing And Nessasaery Accesaries Complite As Per Specification No - Esd-Sol-Stl(4-3-11) , Providing Ms Boxex With Locking Arren- Gement Fitting Etc , Providing And Fixing Of Retro-Reflectorised Informatary Sign Board Rectangular/Square Meter Made Out Of 2Mm Alluminium Sheet Bonded With White Reflective Sheeting Of Class B , Refrigerator Small Number Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 99 L Defrosting Type Direct Cool Shelf Type Wire Number Of Shelves 2 Voltage Range 140-260V Hfc And Cfc Free Yes Color Wine Red Dimension (Mm) 850 X 487 X 568 Warranty 10 Year Compressor Warranty Other Features Interior Light: Bulb Anti-B Technology: Yes 100% Environment Friendly Low Starting Voltage Uninterrupted Cooling Runs On Home Inverter 24 Hour Freshness , Refrigerator Medium Number Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 181 L Defrosting Type Direct Cool Shelf Type Wire Number Of Shelves 2 Voltage Range 140-260V Hfc And Cfc Free Yes Color Candy Wine Dimension (Mm) 1128 X 541 X 661 Warranty 10 Years Compressor Warranty Other Features Door Lock 2.5L Aqua Space In Door Shelf Interior Light: Bulb Anti-B Technology: Yes 100% Environment Friendly Low Starting Voltage Uninterrupted Cooling Runs On Home Inverter 24 Hour Freshness , Refrigerator High Number Of Doors Single Doornumber Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 210 L Defrosting Type Direct Cool Shelf Type Toughened Glass Number Of Shelves 2 Voltage Range 110-260V Hfc And Cfc Free Yes Color Pearl Wine Dimension (Mm) 1341 X 577 X 667 Warranty 10 Years Compressor Warranty Other Features Max Savings With Inverter Technology Runs On Home Inverter 24 Hour Freshness , Sewing Machines Specification Indian Standrad For Household Sewing Machines Is:1610 Latest Certification Isi Marked Yes Cm/L No And Date (If Yes) 23112018 Sewing Mechanism Design Single Needle Design For Producing Two Thread Lock Stitch. Reverse Stitch Mechanism Yes Thread Spool Pin Yes Driving Arrangement Driving Arrangements Foot Operated Machine Electric Motor Conforming To Is 996 Latest For Motor Driven Machine Yes Starting Switch For Electic Motor Yes Speed Controller For Electric Motor Yes Pulley And Belt For Electric Motor Yes Safety Requirements Connforming To Is302(Part I)Latest For Electrical Equipment Used Yes Table/ Base/ Stand Table/ Base/ Stand Integral Part Of Sewingmachine Yes Wooden Table Or Base Conforming To Is 12789 Latest Yes Stand(If Supplied) Conforming To Is 12740 Latest Yes Performance Sewing Machine Accuracy Requirement Conforming To Is 7491 Yes Sewing Requirements Conforming To Is 7492 Yes Durability Requirements Onforming To Is 7493 Yes Other Requirements Nickel Plus Chromium Plated Parts Conforming To Service Condition 1 With Designation Fe/Ni/0Bcr R Of Is 1068 Yes Lubrication Orifices Yes An Automatic Thread Tension Release Yes Sewing Machines Components Conforming To Is Pecifications At Annex B To Is 1610 Latest Yes Accessories Supplied With Each Machine In Service Ox(Interchangeable With Machine Of The Same Make And Model) A) One Oil Bottle Filled With 50Ml Oil Min B) Two Screw Drivers (Engineering),One Large And One Small C)Three Bobbins D)Three Needles E) One Embroidery Plate (Where Drop Feed Arrangement Is Not Provided) F) A Booklet Containing Manufacturer S Operating Instruction And Technical Characteristics G) Spool Pin Pad Or Felt Washers (4 Nos) H) Needle Threader Yes Packing Packing In Accordance With Is 8355 Yes Warranty (Years) 1 , Sanitary Napkin Disposal Machine Specification Type Wall Mountable Purpose Burn Used Sanitary Napkins To Sterile Ash And Stop Automaticallycolor Elephant Greyoperation Mode Electronically Operated, Fully Automatic Loading Type Front Loading Stand Provided No Number Of Chambers Two Trap Door Available Yes All Ms Parts Powder Coated Yes Spare Parts Should Be Available For Minimum 5 Years From Date Of Supply Yes All Electrical Parts Are Isi Marked Yes Dimensions Of Main Unit Thickness Of Thermal Insulation Material (Mm) 40 Millimeter Thickness Of Ms/Ss Sheet Of Housing Cabinet (External) (Mm) 1.2 Millimeter Thickness Of Ms/Ss Sheet Of Burning Chamber (Internal) (Mm) (Min) 5 Millimeter Machine Width(Mm) 200-300 Machine Depth (Mm) 201-300 Machine Hight(Mm) 200-500 Machine Weight(Kg) 16-30 Door Width(Mm) 101-150 Door Height(Mm) 101-150 Thickness Of Door (Mm) 25 Millimeter Internal/Burning Chamber Shape Vertical Cylindrical Flexible Emission Outlet Pipe Dia (Mm) 25 Millimeter Detachable Ash Tray Length (Mm) 100-150 Detachable Ash Tray Width (Mm) 151-200 Detachable Ash Tray Height (Mm) 5-15 Stand Height (Mm) 500 Millimeter Stand Width (Mm) 200-300 Stand Depth (Mm) 201-300 Material Of Machine Unit Material Of Housing Cabinet (External) Mild Steel(Crca) Sheet Material Of Burning Chamber (Internal) Mild Steel(Crca) Sheet Finish Of Ms Parts Of Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Material Of Thermal Insulation High Density Ceramic Fiber Sheet Constructional Features Thermal Insulation Of Burning Chamber Housed In Outer Chamber Yes Burning Chamber Tray Provided Yes Emission Outlet Pipe Location Top Of Machine Means Of Connecting The Unit Outlet With Flue Gas Emission Pipe Flanged Type Of Door Lock Provided Latch Lock Control & Functional Features Temperature Indicator Provided Yes Timer Provided Yes Auto Cut-Off Temperature Display Yes Digital Display To See Actual And Set Temperature Yes Minimum Burning Temperature (Degree C) 800 Burning Capacity Per Day (Number Of Napkins) 200-500 Burning Capacity At A Time (Number Of Napkins) 1-15 Residue Ash Per Napkin (Gms) 1 Gram Burning Time Of Full Capacity Napkins/Pads (Minutes) 10 Minute Skin Temperature Of The Unit Under Operation (Deg C) 0-15 Installation, Training, Demonstration And Plumbing Included Yes Electrical And Safety Features Automatic Digital Controller For Time Yes Automatic Digital Controller For Temperature Yes Equipment On/Off Indicator Provided Yes Power Supply 230V +/-10%, 50Hz, Single Phase, Ac Supply Electrical Power Consumption(Watt) 500-1000 Minimum Length Of Power Chord To Be Supplied Along With Machine (Mtr) 2 Meter Type Of Heater Ceramic Heater Containing Coil Power Saver (Auto Power Cut-Off) Yes Safety Mcb Provided (16A To 30A) Yes Protection Against Electric Shock When Checked As Per Is:302-1/2008 Yes Minimum Insulation Resistance (Ir) At 500 Vdc (Mega Ohm) 2 Maximum Electrical Insulation And Leakage Current As Per Is:302-1/2008, (Ma) 0.21 Maximum Earthing Continuity Test When Tested As Per Is:302-1/2008 (Ohm) 0.1 Hv Test At 1000 V Rms For 1 Sec When Tested As Per Is:302-1/2008 No Reakdown Shall Occur During The Test Smoke Control Unit (Scu) Type Of Scu (Smoke Control Unit) Top Mounted Material Of Housing Of Smoke Control Unit (Scu) Mild Steel(Crca) Cabinetfinish Of Ms Parts Of Scu Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Overall Height Of Scu (Mm) 300 Overall Width Of Scu (Mm) 301-500 Overall Depth Of Scu (Mm) 100-300 Number Of Chambers For Filteration Of Smoke Emission Two Both Carbon Control And Foul Odour Control Chambers For Filteration Of Smoke Emission Yes Number Of Filters In Carbon Control Chamber One Type Of Filters In Carbon Control Chamber Steel Mesh Filterr Number Of Filters In Odour Control Chamber One Type Of Filters In Odour Control Chamber Activated Carbon Filterblower Type Centrifugal, Direct Driven Blower Rpm 1800 Power Supply Of Spu 230V +/-10%, 50Hz, Single Phase, Ac Supplyminimum Length Of Flexible Emission Outlet Pipe To Be Supplied Along With Machine (Mtr) 3 Cost Of Additional Flexible Emission Outlet Pipe, If Required On Actuals To Be Paid By The User Yes Emission Standard For Smoke Conformity To Cpcb, Min Of Environment & Forests Standard Hazwams/30/2005-06 Yes Particulates (Half Hourly Average) (Mg/Nm3) (Max) 50 Hcl (Half Hourly Average) (Mg/Nm3) (Max) 50 So2 (Half Hourly Average) (Mg/Nm3) (Max) 200 Construction Of (Half Hourly Average) (Mg/Nm3) (Max) 100 Construction Of (Daily Average) (Mg/Nm3) (Max) 50 Total Organic Carbon (Half Hourly Average) (Mg/Nm3) (Max) 20 Hf (Half Hourly Average) (Mg/Nm3) (Max) 4 Nox (No And No2 Expressed As No2) (Half Hourly Average) (Mg/Nm3) (Max) 400 Total Dioxins And Furans ( 6 To 8 Hours Sampling Basis, Please Refer Guidelines For 17 Concerned Congeners For Toxic Equivalence Values To Arrive At Total Toxic Equivalence) (Ng Teq/Nm3) (Max) 0.1 Cd + Th + Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Hg And Its Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Sb+As+Pb+Cr+Co+Cu+Mn+Ni+V+Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.5 Loss On Ignition (Max) (% Dry Weight Of The Material) 5 Packing Packing Carton Box Marking And Instructions The Appliance Is Marked As Per Is:302-1/2008 Yes Certification Submission Of Test Report From Central Government /Nabl/Ilac Accredited Lab Specifically Containing Electrical & Electronic Parameters, Thermal Insulation Material Of Burning Chamber Etc In Addition To The Declared Specification Parameters At The Time Of Supply Yes Submission Test Report For Equipment For Compliance Of Flue Gas Emission And Ash Upon Combustion Of Sanitary Napkins/Pads To Central Pollotution Control Board (Cpcb) Norms From Nabl Accredited Lab At The Time Of Supply Yes Certification Available Eu-Cecertificate For Manufacturing Premises Available Iso Compliance Certificate Is To Be Furnished After Conducting Comprehensive Performance Test By The Supplier Yes Submission Of All The Certifications To The Buyer Along With Supplies Yesperformance Requirements Warranty (Yrs) 1 , Fully Automatic Coin Operated Sanitary Napkin Vending Machine -100 Pads Specification Sms Notification By Machine Yes Type Of Machine Automatic Type Of Fitting Wall Mountable Color Others Napkin Size For Loading Any Size Napkin Fold Trifoldoperating Features Coin Operated Multiple Coins Accepted Yes Number Of Napkins/Pads Provided/Loaded With The Vending Machine 4 Multiselection Of Napkin Type No Number Of Selection Options 1 Vending Option Vertical Accessibility For Free Vending Utility Service Na Type Of Loading Spiral Less Vending Napkin Individually Packed Yes Led Illumination Provided For Visibility Of Napkins In The Machine No Visibility Window No Pre-Programmable Facility Available Yes Maximum Storage Capacity (Nos)(Nos) 75-100 Digital Counter For Accounting No No Stock Message Display Available Yes Built-In Program For Automatic Coin Return/Reject System When There Is No Stock Or No Power Yes Built-In Program For Automatic Currency Block/Reject System When There Is No Stock Or No Power Yes Built-In Price Programming Software For Changing The Price Yessales Data Retrieval No Any Additional Built-In Features Available When There Is No Stock, Coin Will Not Be Accepted ,Shock Proof,Light Weight & Compact Design Functional Features Material Of The Outer Body Mild Steel(Ms)Type Of Battery Sealed Maintenance Free Lead Acid Built-In Charger No All Ms Parts Are Duly Painted By Powder Coating Mode Of Function Stand Alone Operating Power Source Electronic Input Power Supply 220V +/- 10%, 50Hz, Single Phase Ac Battery Backup Available No Battery Backup Time (Hrs) Na Power Consumption(Watt) 8 Dimensions Width (Mm) 200-400 Depth (Mm) 100-200 Height (Mm) 800-1000 Weight (Kg) 10-20 Thickness Of Ss/Ms Sheet (Mm) 1.2 Thickness Of Frp/Plastic Sheet (Mm) Na Warranty 0Ne Year , Sanitary Pads Specification Napkin / Pad Consists Of Outer Covering With Sufficient Number Of Channels For Leak Protection Yes Type Of Napkin Large Tabless Napkin / Pad Shall Have A Non-Absorbent Barrier On One Side Which Shall Have An Identifying Hread Or Marking Indicating Clearly The Side Of The Barrier Yes Adhesive Back Strip Yes Color Of Pad White Soft,Comfortable,Breathable,Odorless , Anti-Bacterial , Non-Allergic And Bio-Compatible,Bio-Degradable Yes Ph Of The Absorbent Material Of The Napkin As Per Is : 1390-1961 Yes Absorbency With Prescribed Fluid @50 Ml/Min Instead Of 30 Ml Of Cl 5 (1) Of Is : 5405/1980 (First Revision) Reaffirmed 2012, With Amendment 1, Without Leakage On Bottom And Sides Yes Disposability - Disposable Napkin /Pad With Covering Removed Shall Dis Integrate In The Water In Not More Than 5 Minutes When Immersed In 15 Litres Of Water And Stirred Yes Instructions Indicating Removal Of Non-Absorbent Barrier Before Flushing Of Napkin Yes Standard Conformity To Indian Standard Is: 5405-1980(Latest) Except For Absorbency And Size Yes Product Is Bis Marked No Cm/L No(If Product Is Isi Marked) 0 Dimensions Size Of Napkin (Length X Width X Thickness) (In Mm) (200+-10)X (75+-5) X (10 +-1.5) Weight Of Single Pad (In Grams) 9+-1 The Thickness Of The Pad Shall Be Average Of The Height Measured By Stacking 10 Complete Pads Yes Napkin / Pad Should Have Uniform Thickness Throughout Without Any Wrinkle Or Distortion Yes Material Material Of Inside Cover Rayon Absorbent Filler Material Cellulose Pulp Absorbent Filler Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material Yes The Covering Of The Absorbent Filler Shall Be Of A Good Quality Poly-Perforated Film Sleeve, Gauze Or Non-Woven Fabric With Sufficient Porosity To Permit The Assembled Pad To Meet The Absorbency Requirement Yes If Cotton Gauze Is Used For Covering Of The Absorbent Filler, It Shall Conform To Is 758-1975 Na Packing And Marking Primary Packing (No Of Pads In A Pack) 6 Type Of Primary Packing Polyethylene Bags Of Qualitative Material With Gsm 35-40 Printing On Primary Packing Include Logo In Four Colours Using Weather Proof Ink, Name, Manufacturers License No, Address, Length, Dimensions, Lot/Batch No, Date, Month And Year Of Manufacture, Date, Month And Year Of Expiry, Number Of Napkins, Advice For Storage And Any Other Printing Details Required By The Buyer As Per His Requirement Yes Secondary Packing Corrugated Box Of 5X120gsm Number Of Primary Packages In Secondary Package 125 Printing On Secondary Packaging Shall Include Generic Name Of Product, Lot/Batch No, Date, Month And Year Of Manufacture, Expiration Date, Month And Year, Manufacturers Name And Address, Consignee Address, Number Of Primary Packages, Gross Weight, Instructions For Storage, Disposal Instructions, Method Of Use And Indication As To Which Side Is Absorbent Etc And Any Other Printing Details Required By The Buyer As Per His Requirement Yes Ertifications Submission Of Form Central Govt/Nabl/Ilac Accredited Lab To Prove The Conformity To Declared Specification At The Time Of Supply Yes Certification Available Na , Ambu Bag General Type Self Filling With Air Usage Adult Utility Such As Clinic, Hospital, Ambulance Etc Clinic, Hospital Size Medium Colour Of The Bag Green Transparent Yes Flexible And Durable Yes Reusable Yes Autoclavable Yes Manual Resucitator Or Self-Inflating Bag Or Reservoir Bag For Positive Pressure Ventillating Yes Low Resistance Non-Breathing Expiratory Valve Available Yes Type Of Expiratory Valve Polysulphone Pressure Limiting Valve Available Yes Type Of Pressure Limiting Valve True Dimensions Maximum Bag Volume (Ml) 1000 Milliliter Length (Mm) 125 Millimeter Outer Diameter (Mm) 75 Millimeter Weight Including Patient Connector (Gms) 190 Gram Material Material (Medical Grade, Latex-Free, Non-Toxic, Non-Allergic And Antistatic) Silicon Rubber Functional Application Temperature 20 Deg C To 50 Deg C Yes Storage Temperature - 40 Deg C To 70 Deg C Yes Re-Breathing Bag Should Have An Expiratory Resistance Of 2 Point 2 Cms Of Water Yes Re-Breathing Bag Should Have An Inspiratory Resistance Of 3 Point 3 Cms Of Water Yes Re-Breathing Bag Should Have Controlled Flow Rates And Ventillation And With Reduced Airway Pressure Yes Port Available In The Bag To Connect With Oxygen Reservoir Yes Patient Connector Available Yes Type Of Patient Connector Psu And Silicon , 3 Seater Bench Steel Hevy Type Of Seating Separate Seat And Backrest Style With Arm And Backrest Seating Capacity (Nos) 3 Number Of Arms (Nos) 2 Delivery Status Knocked Down Supply To Be Assembeled By Seller On Site Seat Cushion Without Cushion Backrest Cushion Without Cushion Material Material Of Main Frame Mild Steel Material Of Seat And Backrest Mild Steel Material Of Arms Armrest Are Made Up Of Powder Coated High Pressure Aluminium Dye Cast Material Of Legs Powder Coated High Pressure Aluminium Dye Cast Legs Material Of Side Bar Bracket Made Up Of Chrome Plated Solid Steel Thickness Of Material Of Main Frame In Mm 1.8 Thickness Of Material Of Arms In Mm 1.5 Type Of Bolts M12 Bolts Thickness Of Pu Foam For Seat And Backrest ±2(Mm) N.A Density Of Pu Foam For Seat And Backrest ±2(Kg/Cubic Metre) N.A Covering Material For Seat And Backrest Na Dimension Overall Length In Mm (±10 Mm) 1840 Overall Depth In Mm ( ±5 Mm) 750 Overall Height In Mm (±5 Mm) 800 Seat Height From Floor In Mm (±5 Mm) 500 Mm Thickness Of Material Of Seat And Backrest (Mm) 1.2 Mm Certification Conforming To International Standard For Public Seating (*Bifma X 5 Dot 4 Or Equvalent) Yes Colour & Finish Colour Of Covering Material N.A All M S Strucure Finish Powder Coated Colour Of Paint Silver All Steel Component To Be Epoxy Powder Coated 50 Micron Thick Warantee Warantee Period In Number Of Years 1 Misc Seat And Backrest Are Perforated Yes Adjuster For Legs Yes Arms Chrome Plated Yes Legs Chrome Plated Yes Cushion On Arms No , Cushion Chair Tube Thickness - 1 Mm Tube Diameter - 16 Mm Weight: 5 Kg To 5.5 Kg Seat Material: Rexine Body Material: Steel Seat Color: Any Type Of Product: Visitor Chair Without Arms Style: Modern Primary Material: Metal Dimensions: 23 (L) X 21 (W) X 30 (H) Inch , Two Way Board One Side Black Board And One Side White Board With Magnetic Alphabets And Numbers , T-Shirts For Boys -Specification Utility: Unisex, Leeve Length ( Large Half Sleeve ), Depth Of Hemming/Binding At Neckline, Sleeve End And Bottom Binding 3 Cm, Material: Material ( Composition ), Polyester-42± 2%, Cotton-53± 2% And Lycra- 5± 1% ,Mass Of Material (G/ M²) 200 Gram, Knitting Interlock Knitted, Count Of Yarn (Ne) Double, Ph Value Of Aqueous Extract 6.0 To 8.0 ( Hot Method, As Per Is: 1390 ), Neck Binding / Collar Self Material, Bottom Hem ( Bottom Binding ) Self Material , Sleeve End Binding Self Materiallining Without Lining /Lining , Material 100% Polyester Mesh Mass Of Lining (Gram Per Square Meter) Not Applicable, Netting Mesh No Of Holes On Base & Bias Within 625 Square Millimeter Not Applicable Colour Of Mesh Lining Not Applicable Pattern Neck Type With Collars And Buttons Sleeve Type Set In Sleeve Full Sleeve Number Of Buttons In T Shirt With Collar Not Applicable Side Slit Without, Depth Of Side Slit ( In Case Of T Shirt With Side Slit) (Cm) Not Applicable Pocket Without Pocket, Size And Position Of Pocket ( In Case Of T Shirt With Pocket ) ( Width X Depth ) Not Applicable Stitching Sewing Thread 125 D Tex X 3, Polyester, Raw Edges, If Any Shall Be Bound By Overlock Stitching Yes Stitches Per Dm ( Min ) 36 Colour Colour As Per Buyers Requirements Colourfastness Of Fabric And Departmental Logo Colourfastness To Washing [Is/Iso 105-C10, Test- C (3)] Change In Colour - 4; Staining Of Adjacent Fabric - 4 Colourfastness To Perspiration ( Is 971 ) 4 Colourfastness To Rubbing ( Is 766) Dry - 4 / Wet - 4 Colourfastness To Light ( Is 2454 ) 5, Colour Fastness - Potential To Phenolic Yellowing Of Fabric 4 ( Test Method - Iso 105-X18:2007, Latest) Colourfastness To Washing ( Is/Iso 105-C10, Test- C (3))- Mesh Lining Change In Colour- 4; Staining Of Adjacent Fabric- 4 Colourfastness To Perspiration ( Is 971 )- Mesh Lining 4 Other Requirements Pilling Resistant [After 5 Hours Test As Per Is 10971 (Part 1)], Min 4 Dimensional Stability To Washing, Shrinkage Or Elongation Percentage, Max ( Is 2977 Latest), In Lengthwise And Width Wise Direction 3, Spirality, Percentage, Enumerable +/- 4 N/A Mandatory Max ( After One Wash ) ( Is/Iso 16322-1:2005 ) ( Washing As Per Iso 6330- 2A At 60 Degree C ±4, Label Tagless Logo And Marking Logo Marking As Per Grampanchayat / School/Anganwadi Requirements, Type Of Logo Embroidery Embroidery Thread For Logo Rayon , Pants For Boys -Specification Description Pants (Full Pants) For Anganwadi, Preschool,School Children/Boys Utility Utility Boys Size Size Large ( 0 To 18 Yrs ) Dimensions And Pattern Dimensions And Pattern As Per Sketch And Dimension Chart For Icds Pre-School Uniforms- Shorts For Children Of Anganwadi Centers In Gujarat, Furnished By Commissioner Of Women & Child Development, Gandhinagar, Gujarat ( Uploaded For Reference) Sketch And Dimensional Chart For Pre School Uniform- Shorts Has Been Seen And Understood Yes Material Fibre Composition (Warp & Weft) Polyester Staple Fiber (Psf) - 70% And Viscose - 30% (Tolerence ± 5%) ( Test -Method Is: 3416 , Part - 1 ) Count Of Yarn, Warp (Ne) 2/40S (Tolerence ± 5%) ( Test Method - Is: 3442 ) Count Of Yarn, Weft (Ne) 2/40S (Tolerence ± 5%) ( Test Method - Is: 3442 ) No Of Threads, Warp ( Ends Per Inch ) 64 (Tolerence + 5% / - 2.5%) No Of Threads, Weft ( Picks Per Inch ) 52 (Tolerance + 5% / - 2.5%) Mass ( Gram Per Sq Mtr ) 140G To 150G ( Test Method - Is : 1964 ) Weave Plain Stitching Sewing Thread 125 D Tex X 3, Polyester Stitches Per Dm 35 To 40 Raw Edges, If Any Shall Be Bound By Overlock Stitching No Colour Colour Any Other Colour As Per Buyers Requierment Colour Fastness To Light Change In Colour 4 Or Better ( Test Method - Is : 2454 ) Colour Fastness To Washing Change In Colour 4 Or Better , Stain On Adjacent Fabric 3 - 4 Or Better ( Test Method - Test C (3), Is / Iso 105 - C10 ) Colour Fastness To Perspiration Change In Colour 4 Or Better , Stain On Adjacent Fabric 4 Or Better ( Test Method - Is : 971 ) Colour Fastness To Rubbing Dry 4 Or Better , Wet 3 Or Better (Test Method - Is : 766 ) Other Requierments Pocket 2 Side Pockets Waist Band The Shorts Should Have Elastic For Full Portion Of Waist Band Logo And Marking Logo Marking No Type Of Logo Not Applicable Number Of Logos Not Applicable Size, Design And Location Of Logo As Per Buyers Requirement Yes , Socks For Boys And Girls -Specification Product Description Socks Nylon For Gents, Ladies And Childrens (As Per Indian Standard Is: 5084: 1990: Latest) Size Medium (As Per Ind) Colour Colour Other Colors As Per Buyers Requirement Other Colors As Per Buyers Requirement Yes Construction Type Of Knitting Fancy- Knitted (As Per Is Specification) Pattern Of Stitches (Only For Rib And Fancy Knitted Socks As Per Is) Na Kintting Structure Single Cylinder Heel And Toe Single Heel And Toe Top Of The Socks Plain Knitted Diameter Of Machine (Mm) (As Per Is) (Mm) Gauge Of Machine (As Per Is) (Number Of Needles/ Inch) 12 To 14 , Shoes For Boys -Specification Closure Velcro/Less/Slip On Care Rub Gently With A Damp Cloth And Mild Soap Occasion Formal Outer Material Pvc Sole Material Pvc Colour Black Unisex For Boys A Type Shoes Shoe Width: Medium Material Type: Synthetic Lifestyle: Casual , Shoes For Girls -Specification Closure Strap/Slip On Care Rub Gently With A Damp Cloth And Mild Soap Occasion Formal Outer Material Pvc Sole Material Pvc Colour Black Unisex For Boys A Type Shoes Shoe Width: Medium Material Type: Synthetic Lifestyle: Casual , Desk Bench Fibre For Kids Product Description Colorful Study Table For Childrens. Study Table Comes With Vibrant Colors And It Is Made Of Safe Plastic Material.With This Desk Get An Learning And Educational Feel In Atmosphere.Key Features This Table And Chair Combo Is Perfectly Sized For The Kids It Is Made Of High Quality Plastic Material, Which Is Safe And Durable. Kids Will Love To Sit And Study On The Intellect Desk Specifications Brand - Playgro Toys Type - Desk And Chair Set Carrying Capacity - Up To 20 Kg Color - Red Yellow Dimensions - 71 X 73.5 X 62.2 Cm Age - 3 To 8 Years Material - Plastic Items Included 1 Desk And Chair Set , Metal Tricycle Garbage Rickshaw Color Green, Blue, Etc Capacity 480Kg Type Garbage Length 1280 Mm , Lagori Set Material Type(S) Wood Color Multi Item Weight 499 G Package Dimensions 26.5 X 9 X 7.9 Cm With Rubber Ball , Cricket Bat Standarad , Cricket Ball Standarad , Stump Set Standarad , Skipping Rope Standarad , Badminton Set Standarad , Football Standarad , Volleyball Shape Shape Of Volleyball ( When Inflated ) Spherical Dimensions And Mass Circumference 65 Centimeter Weight 260 Gram Material Material Of Case ( Outer ) Synthetic Leather Thickness Of Material Of Case 2 Millimeter Material Of Inside Bladder Rubber Material Of Bladder If Other Than Rubber False Stitching Thread Linen Stitching Thread As Per Is 417 Part 2 Any Other Stitching Thread As Per Buyers Requirements Yes , Volleyball Net Mater+B14ial Of Net Cord Cotton Breaking Strength Of Cord As Per Is 3345 Not Applicable Circumference Of The Cord Of Net 9.5 Millimeter Rope/ Cord To Tie With Post On Both Sides Nylon Breaking Strength Of Rope/ Cord ( Min ) As Per Is 3345 Not Applicable Material Of The Band At Top, Bottom And Sides White Canvas Material Of Flexible Cable Inserted In The Top Band To Fasten The Net To Posts And Keep Its Top Taut Na Dimensions Length Of Net 9.5 Meter Width Of Net 1 Meter Width Of The Two Fold Band At Top 7 Centimeter Width Of The Two Fold Band At Bottom Through Which A Rope Is Threaded 5 Centimeter Width Of Two- Fold Side Band 5 Centimeter Length Of Net On Each Side Of Side Bands 25 Centimeter Size Of Mesh Size Of Mesh ( Square ) Max 10 Centimeter Colour Colour Of Net As Per Requiremetn , Flying Ring Concept Of Toy This Light Weight Toy Provides Endless Variety Of Activities And Games To Children Configuration Having Flying Disc - Upper Side Of The Disk Imbossed/Engraved With Number/Alphabet/Picture (To Attract The Child) : As Reference Representative Image Uploaded Colour Of Flying Disc Any Style Of Upper Side Of Disk Engraved Upper Disk Designed (Embossed / Engraved) With N.A Approval Of Advance Sample Before Bulk Supply No Advance Sample Material Plastic Fruits And Vegetables Made Up Of Non Toxic Virgin Plastic Virgin Polyethylene Terephthalate Dimension & Mass Approximate Outer Diameter 300 Mm Approximate Weight Of Flying Disc 190 Gms. Colour-Finish & Packing Made-Up Ingredients Should Not Be Harmful To Kids Yes Colour And Finish (Other Indeterminable Parameters) N.A The Complete Set Should Be Properly Packed That It Should Not Damage During Transit Yes Flying Disk Big Should Not Have Sharp Edges Or Corners (Safety Point Of View) Yes , 1 Pairs Dandia Sticks For Traditional Games In School/Anganwadi(Multicolor) (14 Inch) Product Specification Name Of The Product Category Wood Crafts / Wood Carving Name Of The Subcategory Wooden Handicraft Name Of The Product Dandiya For Garba Ku Code Sku Code 390 Description Description 1 Pair Dimensions Dimensions ( Mm ) 14 Inch Mass Mass Material Material Wood , Side Drum , Javelin Stick(Bhala Normal)Dimensions Length Of Antenna 1.8 Meter Diameter Of Antenna 10 Millimeter Colour Colour Of Antenna Antenna Is Marked With 10 Cm Stripes Of Red And White Colour Alternatively. Standards And Certifications Product Generally Conforming To Is 3345- 1989 Latest No Product Confirming To International/ National Federation Requirements Like International Volleyball Federation ( Fivb )/ Volleyball Federation Of India ( Vfi ) Yes Certification From International/ National Federations Like International Volleyball Federation ( Fivb )/ Volleyball Federation Of India ( Vfi ) Yes Date Upto Which Certification Is Valid No Warranty Warranty 1 Year Advance Sample Agree To Provide Advance Sample(S) For Buyers Approval Before Commencement Of Supply Yes , Shot Put (Gola Normal) Utility Competition Material Of The Ball Cast Iron Mass And Diameter Of Shot Put- Competition Mass- 3.005 To 3.025 Kg, Diameter- 85 Mm To 110 Mm ( 3 Kg Shot Put ) Product Generally Conforming To Is 4386: 1988, Latest Yes Product Confirming To International/ National Federation Requirements That Is International Association Of Athletics Federations ( Iaaf )/ Athletics Federation Of India ( Afi ) Yes , Lezim 1 Piece Lezim / Lazium Equipment. Product Dimensions: 33 X 2 X 2 Cm Repeatedly Used In School Dance, Military And Other Organizations As A Fitness Drill Best Sports And Entertainment Tools For Exercise And Entertainment Purposes All Material Used Steel And Wire Is Broad And Plat Is Heavy Steel Number Of Puzzle Pieces 1 Batteries Required No Material Type(S) Wood & Steel Color Multi Item Weight 200 G Product Dimensions 6 X 6 X 33 Cm , Chess Set Description Chessboard With Chess Pieces Dimensions And Mass Size ( Length X Width ) Chess Board 32 Centimeter Size Of Square In Chess Board 4.5 Centimeter Mass Of Chessboard ( Gram ) 100 Pieces Total Chess Pieces Total 32 Pieces Are Used For Playing Chess. Each Player Has 16 Pieces: 1 King, 1 Queen, 2 Rooks, 2 Bishops, 2 Knights And 8 Pawns. Height Of Pieces King - 9.5 Cm, Queen - 8.5 Cm, Bishop - 7 Cm, Knight - 6 Cm, Rook - 5.5 Cm And Pawn - 5 Cm. (These Dimensions May Differ Up To 10% From The Above Recommendation, But The Order (E.G. King Is Higher Than Queen Etc.) Must Be Kept) Diameter Of Pieces Base 40-50% Of Its Height. Material Material Of Chess Board Cardboard Material Of Chess Pieces Hard Plastic Colour Colour Of Chessboard The Colors Of The 64 Squares Alternate In Colour I.E Light And Dark Squares. Colour Of Black Pieces Black Colour Of White Pieces Cream Other Requirement Strong And Durable Yes Style Of Pieces Staunton Foldable Type Yes Provision For Storage Of Chess Pieces In Chess Board Magnetic Attraction Between Chessboard And Pieces No , Carrom Board With Carrom Man, Striker And Powder Size 26X26 Shape Shape Of Carrom Board Square Playing Surface Of Carrom Carrom Playing Surface Material Lacquered Plywood Size Of Playing Surface (Side Of Square) 73.5 Cm To 74 Cm Thickness Of Playing Surface (Min) 8 Mm Carrom Playing Surface Is Waterproof Yes Surface Finish Completely Smooth (Carrom Board Shall Be Able To Have At Least Three And A Half Runs Of A Normally Smooth Striker Of 15 Gms Weight, When Struck With The Maximum Force, From One Of The Base Lines, To The Opposite Frame Of The Carrom Board.) Carrom Frame Material Of Carrom Frame Any Other Hard Wood With Good Resistance Carrom Frame Breadth 7.2 Centimeter Carrom Frame Height From Playing Surface 2.54 Centimeter Corners Of The Frame Corners Which Are Adjoining The Playing Surface Are Inside Curved Bracing Suitable Bracings Shall Be Provided Underneath The Playing Surface And Fastened With The Frame. Pockets Of Carrom Pockets At Four Corners Pockets Should Be Round Inwardly And 4.45 Cm In Diameter With Admissible Variation Of Not More Than 0.15 Cm Pocket Net Each Pocket Net Shall Have Capacity Of Holding At Least 10 Coins Marking On Playing Surface Of Carrom Board Base Line Two Straight Lines, Black In Colour, Of 47 Cm (± 0.30 Cm) Each In Length On All Four Sides Of The Playing Surface, Parallel To The Frame. The Lower Of These Two Lines, Which Shall Be Between 0.50 Cm And 0.65 Cm In Thickness, Shall Be 10.15 Cm Away From The Frame And The Other One 3.18 Cm Away From The Lower Part Of The Base Line. Base Line Circles The Base Lines Shall Be Closed By Circles Of 3.18 Cm In Diameter At Both Ends. Within This Circle A Portion Of 2.54 Cm In Diameter Shall Be Coloured In Red. These Shall Be Drawn So As To Touch Both The Base Lines And Also The Upper Base Lines Of The Adjacent Side When Imaginably Extended. The Distance Between The Base Circle On One Side And That Of The Other May Be 1.27 Cm Approximately. Arrows Four Arrows, Black In Colour, Of Not More Than 0.15 Cm Thickness Shall Be Drawn At Each Corner Of The Carrom Board At An Angle Of 45 Degrees To Any Of The Adjacent Sides And Each Of Them Shall Pass Through The Gap Between The Two Base Circles And Point Towards The Centre Of The Pocket Leaving A Clear Distance Of 5.00 Cm From The Edge Of The Pocket. The Length Of The Arrows Shall Not Exceed 26.70 Cm. A Decorative Arch Of 6.35 Cm In Diameter With Pointers At Both The Ends, Drawn At The Starting Point Of The Arrows Leading Towards The Pocket, Is Permissible. Centre Circle Exactly In The Centre Of The Carrom Board There Shall Be A Circle Of 3.18 Cm (± 0.16 Cm) In Diameter Drawn Black In Colour. Circle Shall Be Filled In Red Colour.Outer Circle A Circle Of 17.00 Cm (± 0.30 Cm) In Diameter With The Centre Point Of The Carrom Board As Its Centre, Black In Colour. Any Decorative Design In The Circle Is Permissible. , Rubber Ring Approximate Diameter Of Outer Ring 150 Mm Approximate Diameter Of Inner Ring 90 Mm Weight Of Ball With Tolerance Of (-) 10 Gms N.A Weight Of Ring With Tolerance Of (-) 10 Gms 100 Gms. , Wall Fantype Of Fan Mounting Bracket Mounted Fan For Wall Mounting, Method Of Mounting On Fan Base Oscillating, Type Of Fan Motor Non-Capacitor Type, Fan Size 400 Millimeter, Minimum Air Delivery (Cubic Meter/ Min) 65 For 400Mm, Maximum Input Power For Capacitor Type Fan (Watt) 61 For 400Mm, Maximum Input Power For Non - Capacitor Type Fan (Watt) 73 For 400Mm, Ingress Protection For Fan Motor And Regulators Ip 21, Generic Motor Type Ac Type Of Enclosure Of Motor And Regulator Ventilated, Class Of Insulation For Fan And Regulator Class Ii , Rated Voltage 220V Ac Speed Control Mechanism Pull Cord Or String Based Control , Rpm At Maximum Speed 1325, Number Of Blades 3 , Material Of Blade Aluminiums, Body Colour Any, Blade Colour Any ,Fan Guard Yes Fan Guard Material Powder Coated Metal Wire Number Of Speed Steps 3 Adjustable Vertical Tilt Yes Angular Movement 180 Degree, Length Of Cord With Suitable Plug Top (Inclusive In The Scope Of Supply) 2 Meter, Additional Features, If Any High Speed , List Of Items And Quantity Of Each Item Included In The Offer Wall Mounted Clip , Gas Bhatti Single Burner- General Fuel Type Lpg Material Body Material Stainless Steel(304) Leg Material Stainless Steel(304) Shape,Design & Colour Top Shape Square Number Of Burner 1 Regulator With Step In Regulator 1 Stove Leg Withleg Shape Square Pipe Stove Wheel No Number Of Wheel Na Wheel Brake No Finish Polished Dimensions Overall Length(In Mm) 300-320 Overall Width(In Mm) 301-320 Overall Height(In Mm) 300-320 Burner Diameter(In Mm) 50-60 Wheel Diameter(In Mm) 121-130 Ss Sheet Body Thickness(In Mm) 0.61- 0.7 Pipe Size(In Mm) Dia 20 Pipe Thickness(In Mm) 0.8- 0.9 Leg Height(In Mm) 41-50 , Desk Bench For Kid 6 To 10 Yrs Generic Type Of Desking Integrated Desk Cum Seating With Shelf / Storage Under Desk Desking Configuration Three Seater Length Of Desking, Seating And Backrest (If Provided) In Mm (±10 Mm) 1500 Desk / Bench Specifications Material Of Desk Top +/- 2 Mm (For Shelf / Storage +/- 4 Mm) 20 Mm Thick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Or Side Pannel Ss 202 Structure Height Of Desk Top In Mm (±5 Mm) 700 Width Of Desk Top In Mm (± 5 Mm) 400 Seating Specification Material Of Seat And Backrest (If Provided) (+/- 2 Mm (For Back Rest +/- 4 Mm) 20 Mm Hick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Ss 202 Structure Material Of Seat Cushion Without Cushion Width Of Seating In Mm (±10 Mm) 300 Height Of Seat In Mm (±10 Mm) 460 B193width Of Backrest If Provided In Mm (± 5 Mm) 280 Back Support For Seating Of Same Materail As Seating Provided Without Cushion Misc Design As Per Dgs&D Drawing No Dqa/Ge/Rc-208/Schedule 19 (Drg 1,2,3,4,5,6,7,8,9,10) Can Be Configured As Per Buyers Choice Within Offered Technical Details Colour Of Finish As Per Buyers Choice Desk Top Finishing Two Long Sides Shall Have Post Form Half Round Profile And Other Two Sides Edge Banded With 2 Mm Thick Pvc Tape With The Help Of Hot Melt Glue , Desk Bench For Kid 10To 16 Yrs Generic Type Of Desking Integrated Desk Cum Seating With Shelf / Storage Under Desk Desking Configuration Three Seater Length Of Desking, Seating And Backrest (If Provided) In Mm (±10 Mm) 1500 Desk / Bench Specifications Material Of Desk Top +/- 2 Mm (For Shelf / Storage +/- 4 Mm) 20 Mm Thick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Or Side Pannel Ss 202 Structure Height Of Desk Top In Mm (±5 Mm) 700 Width Of Desk Top In Mm (± 5 Mm) 400 Seating Specification Material Of Seat And Backrest (If Provided) (+/- 2 Mm (For Back Rest +/- 4 Mm) 40 Mm Hick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 1 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Ss 202 Structure Material Of Seat Cushion Without Cushion Width Of Seating In Mm (±10 Mm) 300 Height Of Seat In Mm (±10 Mm) 800Mm B193width Of Backrest If Provided In Mm (± 5 Mm) 280 Back Support For Seating Of Same Materail As Seating Provided Without Cushion Misc Design As Per Dgs&D Drawing No Dqa/Ge/Rc-208/Schedule 19 (Drg 1,2,3,4,5,6,7,8,9,10) Can Be Configured As Per Buyers Choice Within Offered Technical Details Colour Of Finish As Per Buyers Choice Desk Top Finishing Two Long Sides Shall Have Post Form Half Round Profile And Other Two Sides Edge Banded With 2 Mm Thick Pvc Tape With The Help Of Hot Melt Glue , Amplifire 800 Watt Power Output 1150W Rms Max., 800W Rms At 10%Thd, 770W Rms At 5% Thd 725W Rms At 2% Thd Output Regulation = 2Db, No Load To Full Load At 1Khz Input Channels 1 × Mic 1Mv / 4.7K?, 1 × Aux 100Mv / 470K?, 1 × Aux 250Mv / 20K?, 1 × Cd 250Mv / 20K?, 1 × Line 1V / 20K? Frequency Response 50Hz-18,000Hz ±3Db Signal To Noise Ratio 60Db Tone Controls Bass (100Hz) : ± 8Db, Treble (10Khz) : ± 8Db Line Output 1V/1K? Speaker Output 2O, 4O & 8O , Speaker Box 700 Watt Pairinput Power 700W Rms Configuration Two Way Frequency Response 40-20,000Hz Components 2 × 15 Lf Speaker, 16 × 7 Dynamic Hf Unit Special (1W/1M) 103Db Max. Rated Special 131Db Nominal Impedance 4O Crossover Frequency 2Khz Port Free Flow Flared Input Connectors 2 Nos. Of Speakon Sockets Dimensions W530 × H1210 × D510mm Weight 65.00Kg , Sound Mixer For Amplifier Power Requirement Ac: 220-240V 50/60Hz, Dc: 12V (1×12V Car Battery) Outputs 2 × Preamp 200Mv/600O, 4 × Line 1V/1K?, 1 × Headphone 120Mv@ 8O Frequency Response 20-20,000Hz (±3Db) Distortion 1% Signal To Noise Ratio 50Db Input Channels 12 × Mic 0.6Mv/4.7K?, 2 × Aux 100Mv/470K?, 1 × Aux 500Mv/100K? Tone Controls Bass: ± 10Db At 100Hz, Treble: ± 10Db At 10Khz Dimensions W350 × H145 × D200 Mm Weight 3.9Kg , Pa Music Horn Input Power 40W Rmspower Taps 40/20/10/5W Impedance 250/500/1K/2K? Frequency Response 120-16,000Hz Special At 1Khz 98Db/1W/1M; 114Db/40W/1M Dimensions W370 × H255 × D300 Mm Weight 6.5Kg Material Abs (Uv Protected) , Mice Stand Type Floor Stand Height 920-1500 Mm Base Dia 230 Mm Weight 4.41Kg , Wireless Mic Type Wireless Form Factor Collar (Lapel) If Wireless, Operating Range (Meter) 30 Meter If Table Top, Length Of Goose-Neck (Mm) 0 Millimeter Polar Pattern / Directionality Cardioid Microphone Transducer Type Condenser Inbuilt Speaker No Frequency Response (Hz) 20-20,000 Hz Equivalent Noise Level (Dba) 15 Signal To Noise Ratio (Db) 15 Electrical Impedance (Ohm) 0Sensitivity -50 Dbv/Pa (3.15 Mv)Led Indicator Availableon/Off Switch Availablevolume Control Yesaudio Connector Type Xlrcasing Material Plasticpower Source Acoperating Temperature Range (Degree C) 5 Operating Humidity (Rh%) 80Dimension (W X H X L) (Mm) 210 X 42 X 152Net Weight (Gram) 250 Gramwarranty (Years) 1 , Wired Mic Specificationtype Wired Form Factor Handheld If Wireless, Operating Range (Meter) 0 Meter If Table Top, Length Of Goose-Neck (Mm) 0 Millimeter Polar Pattern / Directionality Cardioid Microphone Transducer Type Dynamic Inbuilt Speaker No Frequency Response (Hz) 20-20,000 Hz Equivalent Noise Level (Dba) 14 Signal To Noise Ratio (Db) 12 Electrical Impedance (Ohm) 14 Sensitivity -54.5 Dbv/Pa (1.85 Mv) Led Indicator Not Available On/Off Switch Available Volume Control No Audio Connector Type Xlr Casing Material Plastic Power Source Dc Operating Temperature Range (Degree C) 34 Operating Humidity (Rh%) 34 Dimension (W X H X L) (Mm) Na Net Weight (Gram) 1.56 Gram Warranty (Years) 1 , Xlr To Aux 6.5 Mm Cable Xlr Female To 1/4 Ts Cable Is Made Of 100% 4N Ofc For Effective Emi And Rfi Rejection And Flexibility, Extremely Provide Low Fidelity Attenuation During The Long Distance Transmission. ?Hi-Fi Quality?: The Microphone Cable Has Double Shielding (High Density Bc Braid Shielded + Aluminium Foil) Can Provide High Stable Performance And Lowest Loss During The Transmission. Heavy Duty Alloy Metal & Gold-Plating Connectors Increase Durability , Anti-Oxidant, Plugging And Unplugging 6,000 Times To Deliver Pristine Sound. ?High Performance & Rohs Pvc?: The Furui Xlr Female To 6.35Mm 1/4 Ts Cable Has High Resistance Tensile Strength Rohs Pvc Insulation Improves High Frequency Response, Extreme Resistance To High And Low Temperature 14? - 572?(-10?-300?). ?High Strength Nylon Braid & Tensile Resistance Cotton Yarn Wrap?: Ours Microphone Cable Use High Strength Nylon Braided Support 20 - 25 Kg Pulling Force, High Resistance Tensile Strength Cotton Yarn Wrap Provides Amazingly Superior Clarity And The Highest Cancellation Of Noise And Rf Interference. And Ours Xlr Female To 1/4 Ts Cable Is Very Flexible, 23 Awg, Od 6.5 Mm (0.256 Inch), Can Bent 90 Degree. , Cymbal /Zanj Band Pair Cymbal Type Clash Cymbal Material Nickel, Silver Plated Size 20 Inch , Mop / Pocha Package Mop 1, Mop Head 2, Liquid Dispenser Mop Comes With Microfiber Mop Head Works Great Wet Or Dry Banded Strands Make The Mop Super-Absorbent Mop Cleans Easily Around And Under Furniture, In The Bathroom And Along Baseboards And Other Hard-To-Reach Places Keeps Your Hands Out Of Dirty Water Mop Head Disengages With Your Foot So Your Hands Never Have To Touch The Mess Handle Angle May Be Adjusted From 45 To 180 Degrees For The Most Comfortable Mopping Position Mop Head Is Machine , Nail Cuitter For Kids 0 To 12 Yrs Key Features: Stainless Steel Blunt Edge Avoid Hurting Your Babys Skin Easy To Clean Specifications Type - Nail Clipper Age - 2 To 4 Years Package Dimension - 12 X 7 X 5 Cm Product Dimension - 12 X 7 X 5 Cm Weight - 70 Gm Items Included In The Package 1 Nail Clipper The Baby Nail Clipper Are Made In Stainless Steel. It Has Curved Blade With Rounded Ends To Ensure Complete Safety During Use. They Come With A Cover To Hygienically Protect The Blades When Not In Use. The Front Part Of The Scissors Is Round Shape Designed. , Pencil Type And Grade Type Of Pencil General Writing Grade Hb Physical Properties Length Of Pencil (Mm) 177 No. Of Pencils In One Pack (Nos.) 10 Shape And Color Shape Of Pencil Hexagonal Body Colour Blacl Gray , Eraser-Soft And Smooth Erases Graphite Gently Without Damaging Paper Picks Up Dust While Erasing , Sharpner Body Material Plastic / Metal Blade Material Metal Blade Length (Mm) 10 Blade Width (Mm) 5 Diameter Of Sharpening Hole (Range) 9Mm-10Mm Sharpening Holes Singl , Type Ofregisters Plain Register Dimension Of Paper (Length X Width) (Mm X Mm) 148 X 210 Dimension Of Cover (Length X Width) (Mm X Mm) 160 X 215 Grammage Of Paper (Gsm) 70 Grammage Of Cover Paper (Gsm) 150 Brightness Of Paper (%) 72 Smoothness Of Paper (Bendtsen) (Ml/Min) 120 Opacity (%) 80 Number Of Pages 200 Type Of Binding Softcover Cloth Bound Content And Desciption General Format , Two Way Board (One Side Black And One Side White Board Inclidoing Magnetic Alphabets And Numbers) , Cob Web Brush Ape Of Brush Round & Curved Cobweb Brush Head Detachable Type Of Stick Telescopic Material Material Of Bristles Plastic Material Of Stick Plastic Dimensions Length Of Bristle (Mm) 100 Overall Length Of Brush Head (Mm) 225 Length Of The Stick (Full Open) (Mm) 2500 Overall Weight Of Cobweb Brush 170 , Wooden Speech Podium / Lecture Stand/Dias: Mode Of Supply Assembled Ready To Use Frame Type Free Standing Understructure Of Podium Gable End And Modesty Panel Storage No Storage Shelves Without Shelves Reading Surface Angled Surface Top Position Fixed Paper Stop No Wire Management Without Number Of Socket Box 0 In Built Sockets For Lan / Internet No Type Of Socket Box No Socket Box Material Podium Top Material Mdf Board Of Grade Sbg Ii Of Is 12406/Latest Gable End And Modesty Panel Material Flat Single Layer Prelaminated Mdf Board Conforming To Having Designation Plmdf-23 Of Is 14587/Latest Leg Material Teak Wood Misc Podium Top Long Sides To Be Post Form Half Round Profile With Corner Edge Bending Podium Top Plain Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Gable End And Modesty Panel Plain Side N.A Number Of Buffers Provided N.A Dimension Thickness Of Podium Top ±2Mm 12 Millimeter Thickness Of Gable End And Modesty Panel ±2Mm 12 Millimeter Length Of Podium Top ±10Mm 600 Millimeter Depth Of Podium ±10Mm 500 Millimeter Height Of Podium ±10Mm 1100 Millimeter Presenter Side Height ± 10Mm 1050Mm Dimension Of Leg (Mmxmm) ±5Mm No Legs Shelves Width Of Shelves ±10Mm N.A Depth Of Shelves In Mm (±10Mm) Na Footrest Material Of Footrest Flat Single Layer Prelaminated Mdf Board Conforming To Having Designation Plmdf-22 Of Is 14587/Latest Length Of Footrest ±10Mm N.A Depth Of Footrest ±10Mm N.A Height Of Footrest (Front / Back) ±10Mm N.A Finish Of Exposed Edges To Be Banded With 0.5-1.0Mm Thick Pvc Tape With The Help Of Hot Melt Glue Material Thickness Of Footrest ±2Mm N.A Colour & Finish Podium Top Finish Laminate In Colour With Swede Finish 0.6-0.8Mm Thickness Of Type S,F Or P Having Index No.3.2.3 Conforming To Is 2046/Latest With Having Balancing Laminate Of 0.5Mm Thick On Other Sidetable Top Shade Peach Warranty Warranty Period In Number Of Years 1 , Pa Driver Units Weatherproof And Rugged Construction. High Spl, Crisp Penetrating Sound. Voice Coils Precision-Wound On An Aluminium Bobbin For Efficient Heat Dissipation. Degree Of Protection Ip 66 Provided, When Mounted On A Reflex Horn, Against Foreign Particles Such As Dust And Jets Of Water Thus Making Them Ideal For Outdoor Use. Meets En 60529.Input Power 60W Rms/90W Max. Impedance 16O Frequency Response 160-7,000Hz Special At 1Khz 113.5Db/1W/1M, 132Db/60W/1M Temperature Range -30°To + 70°C Throat Coupling 1-3/8 - 18Tpi, Throat Couple No.1 Dimensions Ø125 X H100 Mm Weight 2.05Kg Material Die-Cast Aluminium Acoustic Head (Flange) , Pa Trumpet Horn-Heavy Duty Aluminium Trumpet Is Ideal For Most Of The Large Outdoor Installations. Rugged Construction And Fitted With A Protective Pvc Ring On The Flare. Acoustically Well Designed, It Matches Ahuja Driver Units For An Efficient, Powerful And Clear Sound.Bell Dia 22 Cut-Off Freq. 160Hz Weight 2.27Kg , Amplifire Ideally Suited For A Wide Variety Of Music And Public Address Applications.6 Mic & 2 Aux Inputs.Built-In Mp3 Player With Lcd Display, Remote Control, For Usb, Sd/Mmc Cards.Preamplifier And Line Output For Connecting To A Booster Amplifier And For Recording The Programme.Line Input For Connecting The Output From Any External Mixer Or Permittingamplifire To Be Used As A Booster Power Amplifier Resettable Circuit Breaker For Protection Against Overload And Short Circuit.Instant Transfer To Dc Power (2Ã- 12C Car Battery) If Ac Power Fails.Box Speaker/Driver Unit Selector Switch. Bass Boost Defeated At Driver Unit Position For Safer Operation Of Driver Units. , Mic Microphone Cable 100M Material Plastic Branded Color Black Size 100M Power Source Electric Pack Type Box 2*(28/0.08Mm Bc+1/Tinsel Copper+1.75Mm Pvc)+Filling Cotton Yarn+Alp+112/0.08Mm Bc Braid +5.8Mm Pvc , Mic All Purpose Pa Microphone Reproducing Intelligible, Crisp And A Bright Sound. Suitable For Multi-Purpose Pa Installations. Supplied With Quick Detachable Holder With 3-Pin Professional Xlr Connector & 6 Mtrs. Twin Core Shielded Low Noise Cable. , P A Speaker ? 100 Watts ? Pa Speaker System ? A Compact Superior Quality Speaker System Comprising Of A Single 12 Full Range Dual Cone Speaker And A Piezo Horn Tweeter. The System Is Outstanding For Its Ability To Handle 100W Continuous Power With Undistorted Response And Is Ideal For Small Pa Applications. ? The Speakers Are Housed In A Rugged Closed Box Enclosure Made Of 18Mm Board, And Carpet Covered. ? 16.70Kg ? 12 Months Warranty , Mic Stand Microphone Stand Employ Sturdy Mechanism Ensuring Trouble Free Movement And Positioning Of Microphone. These Stands Are Functional And Resistant To Rust, Due To Superior Quality Of Chrome Plating/Powder Coating. Ahuja Stand With 5/8 27 Tpi To Match All Microphones.Type Floor Stand Height 920-1500 Mm Base Dia 230 Mm Weight 4.60Kg , Map 8 Nos Set As Following 1 Chikhali Taluka,2 Buldana District, 3 Maharashtra State, 4 India Country, 5 World Map, 6 Natural Map Of Maharashtra, 7 Social Map Of Maharashtra, 8 Political Map Of Maharashtra , Hand Held Digital Infrared Medical Thermometer For Measuring Body Temperature General Features Product Description Hand Held Digital Infrared Medical Thermometer For Measuring Body Temperature Purpose Infrared Thermometer Is A Quick And Easy-To-Use Method To Measure Body Temperature Suitable For All Age Group Product Information Type Of Thermometer Non Contact Infrared Thermometer Body Material Of Ir Thermometer Abs Color Of Device White Ergonomic Design Yes Temperature Display Unit Degree Celsius & Degree Fahrenheit Primary Measurement Mode Body Temperature Mode Measuring Site For Body Temperature Ear & Forehead Lowest Measurable Temperature For Body Mode 32°C (89.6°F) Or Lower Highest Measurable Temperature For Body Mode 42°C (107.6°F) Or Higher Accuracy Of Measurement For Body Temperature In °C (±) 0.2 Degree Celsius Accuracy Of Measurement For Body Temperature In °F (±) 0.5 Lowest Measurable Temperature For Room Temperature Mode 0°C (32 °F) Or Lower Highest Measurable Temperature For Room Temperature Mode 50°C (122 °F) Or Higher Sensor Type Thermal Sensor Display Resolution 0.1°C/0.1°F Response Time 1 Second Measuring Distance For Non Contact Type Ir Thermometer 5 Cm Or Better Number Of Recent Readings That Can Be Stored 10 Built-In Laser Pointer Weight Of Device With Battery 150 Gram Dimensions Of Device (Mm X Mm X Mm) 150X75x40 Display Display Type Lcd Display Backlit Display Yes Display Size 1.5 Inch Features Features Available Interchangeable Celsius & Fahrenheit Modes,Low Battery Indicator,Auto Power On,Trigger/Button For Operation,Auto Power Off When Not In Use,Display Of Previous Reading On Screen With Current Reading,Sound Indication When The Thermometer Is Ready To Take Or Show The Temperature,Audible Alarm For Fever,Different Backlight Colours To Differentiate Between The Fever Ranges,Silent Mode,Auto Hold Function,Waterproof Lens Easy To Clean And Disinfect,Data Transfer Facility Of Other Devices Through Usb/Bluetooth/Wifi/Rs 232,Limit Value For The Adjustable Alarm As Programmable Power Source Power Source Non Rechargeable Battery Battery Chemistry Li-Ion Battery Size, If Non Rechargeable Battery Aaa Number Of Batteries Required For Operation 2 Number Of Batteries Supplied (Inclusive In The Scope Of Supply) 2 Nominal Voltage Of Each Battery (V) 1.5 , Finger Tip Adult And Pediatric And Neonatal Pulse Oximeter Performance Parameters Type Of Pulse Oximeter Finger Tip Should Work During Motion And Very Low Perfusion Conditions Yes Special Signal Processing Technology (Motion Artifact Rejection) Nellcor Compatible Spo2 Probes Disposable Oxygen Saturation Range 0-100% Pulse Rate 25-240 Bpm Display Of Spo2 And Periodical Renewal Digital Display With Bar Graph Accuracy ± 5 % Type Of Patient Adult,Pediatric Should Be Shock Proof Yes Display (With Contrast Adjust-Ability) Lcd Display Should Be Readable From At Least 3 Feet Yes Saturation Displayed On The Screen No Pulse Rate Displayed On The Screen Yes Perfusion Index Displayed On The Screen Yes Status Of Battery Charging Displayed On The Screen Yes Sensor Off /On Status Yes Audible And Visual Alarms Yes Alarm Override Facility Should Be Present Yes Trends 72 Hrs Type Of Trend Display Graphical Data Interval In Sec 0 Power Source Battery Operated Automatic Switch From Mains To Battery In Case Of Power Failure Na Rs 232C Interface For Data Communication And Transfer Na Should Have Provisions For Wireless And Blue Tooth Connectivity Na Patient Extension Cable Not Provided Power Consumption In Watts 0 Operating Temperature Ambient Temperature Of 0 To 40 Deg C And Relative Humidity Of 15 To 90% Weight Of The Machine In Kg 10 Protective Splash Proof Case For Clean And Strogage And Safe Transport Provided No Length Of Power Cable Na Noise Level In Db 0 Display Must Allow Easy Viewing In All Ambient Light Levels Yes , Blood Pressure Machine Digital / Appratus Configuration Details Type Of Sphygmomanometers Or Blood Pressure Recording Unit: Digital Conformity To Indian Standrad For Sphygmomanometers Na For Digital Measuring Device Automated Type Portable Isi Marked Na For Digital Cm/L No And Validity Date Bp-(235)01 26/07/17 Measurement Method Oscillometric Display For Digital Bp Instrument: Lcd(Liquid Crystal Digital) Display Range: Pressure Measurement (Mmhg) 0 To 300 Range:Pulse Measurement For Digital With Accuracy &Plusmn; 5%. (Per Minute) 40 To 200 Accuracy:Pressure Measurement (Mmhg) +/- 3 Pressure Detection Capacitive Pressure Sensor Inflation Automatic Pressure Application By Pump Deflation And Rapid Air Release Automatic Pressure Release Valve Cuff Range Medium (22-32)Cm Dimensions Of The Equipment (Mmxmm) 400 X 80 X 90 Dimensions Of The Display Screen (Mmxmm) 59 X 43 Operating Temperature Range 0 To 55 Degree Celsius Stroage Temperature Range (-10) To 55 Degree Celsius Automatic Power Off If System Is Idle For 3 Minutes. Yes Weight (In Gram) 250 Power Power Source: Aa Size Chargeable Battery Set Type Of Aa Size Chargeable Battery (Aa Size) Lithium , Automatic Online Water Chiller 2 Ton Capacity Item Item Industrial Chiller Design No Of Door Single Position Of Door Top Opening Door Type Hinged Air Tight Door Yes No Of Shelves 0 Wheels No Visibility Of Item Stored No Type Of Insulation Poly Urethane Foam Method Of Defrosting Manually Deforested Type Of Cooling Direct Lock Yes Material Material Of Chamber Interior Abs Material Of Chamber Exterior Prepainted Sheet Door Material Polycarbonate Door Polycarbonate Window Door Cooling Coil Material Copper Instrument Temprature Controler Yes On/Off Switch Yes Storage Chamber Temprature Display Yes Audio Alarm Visual Alarm Digital Display No Visual Alarm Yes Digital Display Yes Capacity And Dimension Storage Volume(Net Capacity)(Liters) 1000 Over All Length(Mm) 1500 Over All Width(Mm) 1000 Over All Height(Mm) 1000 Insulation Thickness(In Mm) 60 Holdover Time(Minute) 60 Performance Eco-Friendly Refrigurator Yes Compressor Ac Reciprocating Compressor Set Temperature Range(Delta) 5 Minimum Achievable Temperature At 32 Degree Centigrade 8°C Green Refrigerants Yes Type Of Refrigerants R134a Voltage 220-240, Single Phase , 50 Hz Power Consumption(Kw/Day) 10 , Sink Hand Wash Station Item Stainless Steel Sink Built In Counter Uses Mess/School/Office And Other For Protection Against Covid-19 And Other Viruses Type Of Sink Built In Counter Stainless Steel Single Bowls Single Drain Board Sink Units Design Shape Of Sink Built In Counter Rectangle No Of Tap Holes 2 Design Feature In Stainless Steel Sink Built In Counter Tap Holes,Over Flow Holes,,Under Self Provided,Drainage Pipe Provided,Waste Jali Provided,Stiffener Provided Between Legs,Kitchen Unit Design Should Be Robust,Back Panel Above Table Provided,Three Side Panel Above Table Provided,Left Hand Side Drainage Provided,Right Hand Side Drainage Provided,Heavy Duty Rubber Shoe Dimension Length Of Counter(In Mm) 1200±10 Width Of Counter(In Mm) 700±10 Height Of Counter(In Mm) 900±10 Length Of Sink Bowl(In Mm) 450±10 Width Of Sink Bowl(In Mm) 500±10 Depth Of Sink Bowl(In Mm) 450±10 Length Of Additional Sink Bowl(In Mm) Na Width Of Additional Sink Bowl(In Mm) Na Depth Of Additional Sink Bowl(In Mm) ,Na Height Of Panel Above Counter 300±10 Height Of Panel Below Counter Na Thickness Of Stainless Steel Sheet(In Mm) 1.2 Thickness Of Sink Bowl(In Mm) 1.0 No Of Leg In Sink Built In Counter 6 Stainless Steel Structure Pipe Size 20 Dia Thickness Of Stainless Steel Structure Pipe 1.5 , Leg Operated Sanitizer Dispenser Or Foot Operated Sanitizer Dispenser Item Item Touchless Sanitizer Dispenser Type Of Dispensing Drop Mounting Type Wall Mounted Design Features Available In Touchless Sanitizer Dispenser Replaceable Liquid Bottle Sensing Range 0 - 4 Inch Rated Voltage 230V-50 Hz Material Body Material Of Touchless Sanitizer Dispenser Stainless Steel 304 Dimension Sanitizer Container Capacity (In Ml) 100-150 Dispensing Sanitizer Volume In One Use(In Ml) 10 , Sofa Set With Cushion 10Ft Material Frame Structure Material And Size (±1 Mm) Any Other Wood Of Minimum 25 Mm Thickness Seat Cusion Material Foam Density Of Cushion Of Seat Material ±3 (Kg/Cubic M) 40 Type Of Spring In The Base / Seating No Spring In The Base Generic Total Number Of Seats In The Sofa Set (Nos) 3 Type Of Sofa And Backrest Seat And Backrest Are Permanently Fixed With The Frame Structure Number Of Single Seater Units (Nos) No Single Seater Unit Number Of Two Seater Units (Nos) No Two Seater Unit Number Of Three Seater Units (Nos) 1 Number Of Four Seater Units (Nos) No Four Seater Units Frame Covering Fully Upholstered Sofa Set Is Foldable To Use As Bed No Backrest Cushion Material Foam Density Of Cushion Of Backrest Material (Kg/Cubic M) 40 Covering Material For Seat And Backrest Fabric Dimension Length Of Single Seater Units In Mm (±5 Mm) 750 Length Of Three Seater Units In Mm (±10 Mm) 3000 Depth Of Sofa Units In Mm (±10 Mm) 800 Sofa Height (Without Back Cushion) ±5 (Mm) 450 Millimeter Sofa Height (With Back Cushion) ±5 Mm 800 Millimeter Arm Width ±5 (Mm) 120 Millimeter Arm Height ±5 (Mm) 600 Millimeter Seat Height (With Seat Cushion) ±5 (Mm) 450 Millimeter Sofa Leg Height ±2(Mm) 75 Millimeter Sofa Leg Width / Diameter ±2 (Mm) 100 Millimeter Seat Cushion Length ±5 (Mm) 710 Seat Cushion Width ±5 (Mm) 510 Seat Cusion Thickness ±5 (Mm) 100 Backrest Cushion Length ±5 (Mm) 710 Backrest Cushion Width ±5 (Mm) 508 Backrest Cushion Thickness ±3 (Mm) 100 Thickness Of Foam In Arms ±2 (Mm) 50 Thickness Of Foam In Back ±2 (Mm) 76 Millimeter Thickness Of Foam In Front ±2 (Mm) 76 Millimeter Thickness Of Foam In Sides ±2 (Mm) 76 Millimeter , Wall Lamination, Decoration, Ply Running And Installation Per Feet Mdf, Paper Phenolic, Particleboard, Plywood, Baltic Russian Birch, Acrylic, Glass, Metal, Resin Panels:Thermally Fused Laminate (Tfl), Thermally Fused Melamine (Tfm), High Pressure Laminate (Hpl), Three Dimensional Laminate (3Dl), Wood Veneer, Translucent, Printed Graphic, Whiteboard, Chalkboard, Magnetic, Tackable With Installation And Its Regarding Feeting Materials Enter Rate In Running Sq Feet With Installation Feeting Chargesand Other Regarding Material , Wall Lamination, Decoration, Ply Running And Installation Per Feet Mdf, Paper Phenolic, Particleboard, Plywood, Baltic Russian Birch, Acrylic, Glass, Metal, Resin Panels:Thermally Fused Laminate (Tfl), Thermally Fused Melamine (Tfm), High Pressure Laminate (Hpl), Three Dimensional Laminate (3Dl), Wood Veneer, Translucent, Printed Graphic, Whiteboard, Chalkboard, Magnetic, Tackable With Installation And Its Regarding Feeting Materials Enter Rate In Running Sq Feet , Touchless Sanitizer Dispenser/Automatic Dispenser Item Touchless Sanitizer Dispenser Type Of Dispensing Spray Mounting Type Wall Mounted Design Features Available In Touchless Sanitizer Dispenser Built-In Sensor For Detection Of Hand,Waterproof,Battery Operated,Battery Cum Electric Operated,Anti-Interference,On/Off Button,Indicator Lamp,Speed Dispensing Of Liquid,Electric Adapter,With Battery,Liquid Filling Arrangement,Replaceable Liquid Bottle,Adjustable Dispensing Volume Sensing Range 0 - 4 Inch Rated Voltage Dc 6V,Dc 12V,230V-50 Hz Material Body Material Of Touchless Sanitizer Dispenser Abs Plastic Dimension Sanitizer Container Capacity (In Ml) 1001-1500 Dispensing Sanitizer Volume In One Use(In Ml) 5 , Flash Card 9.5 Cmx 1375 Cm (Alphabet/Fruit/Animal/Vegitable/Other) Set Of 5 Pcs , Small Board Book Set Of 5 - English - 2 To 5 Year (Domestic Aqua Animal/Birds/Wild Animals/Fruit/Vegitable/Abcd ) Any Set Of Five As Per Requirement , Abcd Chart Set Of 5 Pcs 65X55 Cm Aprrox Size (Abcd/Animal/Body Parts/Vegitable/Frouit/Animal Other) As Per Requirement , Basket Ball For Kids Type - Basket Ball Set Age - 3 To 8 Years Package Dimension - 33 X 25 X 13 Cm Ring Diameter - 14 Cm Ball Circumference - 38.5 Cm Weight - 174 Gm , Digital Infrared Thermometer Gun(High-Precision Infrared Sensor - Stable & Reliable Performance - Wide Temperature Ambience Adaptab) , Finger Tip Puls Oximeter ( Oxygen Level, Pulse Rate And Perfusion Index. It Has A Four-Colour Led Display With Adjustable Brightness And Comes With Signal Strength Display Feature.) , Fully Automatic Digital Blood Pressure Monitor( Fully Automatic Blood Pressure Monitor Operating On The Oscillometric Principle For Precise Measurements And Accurate Results. It Measures Your Blood Pressure And Pulse Rate With Easy One Touch Operation Cuff Size - Fits Arm Circumference (22-32Cm) The Device Uses Its Advanced Intellisense Technology For Comfortable Controlled Inflation Without The Need Of Pressure Pre-Setting Or Re-Inflation Even A Slight Pressure Change Can Be Detected Resulting Most Accurate Measurementalong With Blood Pressure Monitoring This Product Detects Irregular Heartbeat. It Is Loaded With Body Movement Indicator And Blinks If Your Systolic Or Diastolic Pressure Is Outside The Standard Range (Above 135 Systolic/85 Diastolic Mmhg)) , All In One Steam Vaporizer Machine For Cold And Cough With Nozzle Inhaler, Facial Sauna And Facial Steamer Machine For Adults And Kids , Hemoglobin Digital Monitor Accurately Detects Both Hb And Hct Levels Quick Hb And Hct Results Within 15 Seconds Simply Insert Strips, Apply Blood Specimen And Read Results Auto Calibration For Added Convenience No Specimen Preparation Required Low Maintenance And Quick Clean Up Urate Precise Result Equivalent To Automatic Hematology Analyser Only A Single Drop Of Fingertip Blood 10 Ul Sample Volume Required Wide Hb Measurement Range Of 5-25.6 G/Dl With Hct Range Of 15-75% Storage Maximum Test Results Portable Operated By Battery Or, Optional Ac Adapter Small And Handled For Immediate Diagnosis Ready To Use In Any Point Of Care Setting Dry Strips Hence Easy To Carry Anywhere , 3 Ply Face Mask Non Woven Disposable Face Mask Made Of Soft Non-Wove. Adjustable, Good Toughness, Good Nose Shaping, No Leakage. High-Quality Elastic Ear Loop, Stretching 19Cm, Suitable For Various Types. , 6-Inch Pre-Powdered Sterile Surgical Gloves-Box Of 50 Pairs Function:Anti-Smash, Anti-Heat, Anti-Cut, Arthritis Therapy, Anti-Static, Touch Screen, Anti-Vibration Material:Latex Aql 1.5 Colour:Blue, Violet, Black, White, Cobolt Blue Type:Powdered Or Powder Free Size:22*11*6, Xs/S/M/L/Xl Weight Of 9 Size:2.5Gsm-8Grms , Compressor Nebulizer Has An Attractive Wall-Mounting Design. The Body Is Made With Abs Plastic For Better Shock Absorption. Provides Anti-Vibration Feet. Doesnt Cause Much Noise. Comes With A Long Shelf-Life Compressor. Has An Attached Handle For Convenient Operation. , Blood Glucose Monitor With 10 Test Strips 1. Measurement Range: 1-33. 3Mmol/L 2. Blood Sample: Fresh Capillary Whole Blood 3. Blood Valume: 0. 5?L Small Blood Sample 4. Test Time: 5 Seconds 5. Operating Temperatuure: 10? To 35? 6. Automatic Alarm Clock Reminder 7. Date Management: 7, 14, 28, 60, 90 Days Averaging , Electrical Needle Syringe Destroyer/Needle Destroyer For Hospital And Laboratory Needle-Destroyers Minimize The Occurrence Of Accidental Needle-Sticks Because They Allow Immediate Removal And Containment Of The Needles, Especially If The Device Is Near The Area Of Use Provision Of On/Off Switch With Pilot Lamp Shock Proof-Main Circuit Breaker Is Provided. Portable, Compact, Handy , Pendent Lam Holder Usage/Application Laboratory Material Pvc Capacity 10L Packaging Type Box Weight Light Weight. Size 385*160*295 Mm Diameter 160 Mm , Pendent Lam Holder Material Plastic Style Classic Switch Installation Type Ceiling Colour White Brand Confident Shade Material Wood, Polycarbonate , Basics Storage Rack 7 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 7 Shelf Type Of Product : Storage Rack , Basics Storage Rack 6 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 6 Shelf Type Of Product : Storage Rack , Basics Storage Rack 5Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 5 Shelf Type Of Product : Storage Rack , Basics Storage Rack 4 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 4 Shelf Type Of Product : Storage Rack , Rechargeable Ultra Led Torch 0.5 Watt Type : Led Torch • Material : Plastic • Color : Assorted • Rechargeable : Yes • No.Of Lumens : 60Lm • Capacity : 0.5 Watts , Mrudung / Mridangam General Shell Material Jackfruit Wood Tuning Type Lace Tuned Color Brown , Product Dimensions ?50 X 30 X 30 Cm; 6 Kilograms Batteries Included ?No Batteries Required ?No Material ?Iron And Leather Item Weight ?6 Kg , Wooden Standard Harmonium Harmonium Material Specification Reed Material Copper Material Wooden Material Of Knobs Nickled Metal Material Of Frame On The Back Keys Glass Wood Type Kail Dimension Details Length 60 Centimeter Height 20 Centimeter Width 30 Centimeter Weight 6 Kilogram General Features Types Standard Harmonium Scale Changer No Coupler Type Na Reed Set Type Na Special Reeds No Extra Notes Na No. Of Drones Na Bellow Type Seven Fold Bellow Top Body Cover No Frequency (Hz) A440 Portable Yes Keyboard With Lock No Special Keys No Number Of Keys 33 Color Brown No Of Stop Knobs 7 , Handmade Jhanjh Percussion Indian Musical Instrument Cymbal Pair (Gold) 5D , Piano Portable Keyboard 61 Keys Product Dimensions ?93 X 25.6 X 7.3 Cm; 93 Grams Batteries ?6 Aa Batteries Required. , Type Of Product: Solar Combooperating Voltage: 12Vsolar Wattage: 50W Spvbattery Include: Artheon Batteryled: Dc Ledbattery: 40Ah , Type Of Solar Module Polycrystalline Module Efficiency =15% Module Product Warranty 1 Year Charger Technology Mppt Warranty Of Pcu 12Month Output Phase Single Rated Power (Kva) 1.5 Efficiency At Stp For Linear Loading =90% Input Phase Single Nominal Battery Dc System Voltage 48 Volt Capacity Of Power Plant (Kva) 1 Battery Warranty 1 Year No Of Battery 1 Battery Capacity (Ah) 150 , Laptop Office Bag Multicolour Leather P.U. Office Bag No. Of Compartments:5 Product Dimension (Lxwxh) Cm:40X20x30 , Mobile 4 G Supported : 48Mp (F2.0) Quad Rear Camera + 8Mp (F2.2) Ultra Wide Camera + 5Mp (F2.4) Depth Camera +5Mp (F2.4) Macro Camera | 20Mp Front Camera 16.21 Centimeters (6.4-Inch) Super Amoled - Infinity U Cut Display, Fhd+ Multi-Touch Capacitive Touchscreen With 1080 X 2400 Ixels Hd+ Resolution, 412 Ppi | 16M Color Support Memory, Storage & Sim: 6Gb Ram | 128Gb Internal Memory Expandable Up To 512Gb | Dual Sim (Nano+Nano) Dual-Standby (4G+4G) Android V10.0 Operating System With 2Ghz+1.7Ghz Mediatek | Mt6768 Octa Core Processor 5000Mah Lithium-Ion Battery 1 Year Manufacturer Warranty For Device And 6 Months Manufacturer Warranty For In-Box Accessories Including Batteries From The Date Of Purchase Box Also Includes: Travel Adapter, Usb Cable And User Manual , Steel Folding Cot Steel/Iron Frame Width Of Frame +/- 5(Mm) 762 Mm Length Of Frame +/- 5(Mm) 1980 Mm Size Of Mdf Board 2100X900x17 Mm Size Of Plywood 2100X900x19 Mm , All In One Printer (Inkjet Technology Monochrome) With Adf , Stapler Big Size Half Strip All Metal Construction With Plastic Cover Quick Loading Machanism Rotating Anvil And Reload Indicator. Ideal For Frequant Stapling , Stapler Pin Big Heavy Duty Staple Pin Size 24/6 Big Staple Pin And Big Stapler Pin Use For School, Offices , Stapler Medium Size Half Strip All Metal Loading Capacity: 50/100 Pins Model: 999 Staple Used: No 10 Stapling Capacity: 20 Pages All Metal Half Strip Stapler Quality Steel Component Quick Loading , Paper Punching Machine Punching Capacity: 11 Sheets Punching Dia: 5.50 Mm Punching Distance: 80 Mm , Paper Punching Machine Medium Size Punching Capacity: 22 Sheets Punching Diameter - 5.5 Millimeters, Punching Distance - 80 Millimeters Medium Size Punch Silky Touch , Hole Diameter 5.5Mm Hole Distance 80Mm Material Metal No. Of Holes 2 Punching Capacity 36 Pages , Ice Pick(Tocha) Handle Wooden / Fibre /Plastic/Steel/ Iron Handle Size Size 4.5 , Tent House Jumbo Big Sizeextremely Light Weight Water Proof Kids Play House Tent For 10 Year Old Girls And Boys Product Dimensions Product Width 73 Cm Product Height 108 Cm Product Weight 0.4 Kg , Product Width 73 Cm Product Height 108 Cm Product Weight 0.4 Kg , Doll House Playhouse Playset Age - 3 Years+ Material - Plastic Dimensions - L 16 X B 8 X H 31 Cm , Thermos Stoneware Tea Kettle Set 1000 Ml Material Material Of Kettle Stoneware Grade Of Glass Embossed Material Of Infuser Stainless Steel Food Grade Infuser With Material Of Handle Stoneware Design Type Of Handle Fixed Artistic Design, Pattern And Logo Over Kettle Yes Artistic Design,Dimension Of Kettle Capacity Of Kettle (Mm) 1000 Wall Thckness Of Kettle (Mm) 2 Additional Items Cup And Saucer Set With Details Of Cup And Saucers Set No Of Cups And Saucers In Each Set (Nos) 2 Capacity Of Cup (Ml) 70 Wall Thickness Of Saucer 3 Overall Diameter Of Saucer (Mm) 60 Colour Of Cup And Saucer Set Na Wall Thickness Of Cup (Mm) 4 Wall Thickness Of Saucer (Mm) 60 Performance Of Kettle Suitable For Heating On Direct Flame Yes Suitable For Heating On Induction Heater Yes Suitable For Heating On Hot Plate Yes Recommended Max. Temperature For Safe Use (Degree C) 90-120 , Stainless Steel Serving Tray (Large Size) For Serving Water And Dishes Product Dimensions ? : ? 43 X 30 X 3 Cm; 330 Grams , Serving Tray Set Of 3 For Coffee/Tea/Breakfast(Printed Design) Product Dimensions ? : ? 43 X 30 X 3 Cm; 330 Grams , Tea Set Items Cup ,Soucer ,Tea Set Number Of Cup In One Tea Set 6 Pcs Number Of Soucer In One Tea Set 6 Pcs Number Of Tea Pot In One Tea Set Na Number Of Milk Pot In One Tea Set Na Number Of Sugar Pot In One Tea Set Na Material Of Tea Set Ceramic/Glass/And Other Nominal Capacity Of Tea Pot ( In Litre ) Na Nominal Capacity Of Milk Pot ( In Litre ) Na Nominal Capacity Of Sugar Pot ( In Gram ) Na Nominal Capacity Of Cup ( In Ml ) 150 Diameter Of Soucer ( In Mm ) 100 Diameter Of Cup Rim ( In Mm ) 50 Height Of Cup ( In Mm ) 50 Required Overall Length Of Tray ( In Mm ) Na Required Overall Width Of Tray ( In Mm ) Na Required Overall Diameter Of Tray ( In Mm ) Na Coller Hole Of Tray Na , Table Topglass Water Glass Lass Tableware Items Water Glass Conformity To Specification Is 1961 Product Is Bis Marked Yes Design On Glass Tableware Na Nominal Capacity Of Glass Tableware For Liquid (Ml) 300 Nominal Capacity Of Glass Tableware For Solid (Gm) Na Minimum Thickness At Any Point(Mm) 3.0 Top Diameter Of Glass Tableware(Mm) 90 Bottom Diameter Of Glass Tableware(Mm) 90, Height Of Glass Tableware(Mm) 100 Length Of Butter Dishes(Mm) Na Width Of Butter Dishes(Mm) Na , Beverage Cup, Stackable Cups, Break-Resistant Commercial Polycarbonate Glasses Table Topglass Water Glass Lass Tableware Items Water Glass Conformity To Product Is Design On Glass Tableware Na Nominal Capacity Of Glass Tableware For Liquid (Ml) 300 Nominal Capacity Of Glass Tableware For Solid (Gm) Na Minimum Thickness At Any Point(Mm) Na Top Diameter Of Glass Tableware(Mm) Na Bottom Diameter Of Glass Tableware(Mm) Na, Height Of Glass Tableware(Mm) 100 Length Of Butter Dishes(Mm) Na Width Of Butter Dishes(Mm) Na , Frame Type Free Standing Understructure Of Table Gable End And Modesty Panel Storage Provided Both Side Keyboard Tray Provided Foot Rest Not Provided Material Table Top Material Three Layer Prelaminated Particle Board(Wood Product) Of Grade Ii Type Ii Of Is 12823/Latest Gable End And Modesty Panel Material Three Layer Prelaminated Particles Board(Wood Product) Of Grade Ii Type Iii Of Is 12823/Latest Leg Material No Legs Misc Table Top Long Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Table Top Plain Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Gable End And Modesty Panel Plain Side Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Number Of Buffers Provided N.A Dimension Thickness Of Table Top ±2 Mm 38 Millimeter Thickness Of Gable End And Modesty Panel ±2Mm 38 Millimeter Length Of Table Top ±10 Mm 1500 Millimeter Depth Of Table ±10 Mm 850 Millimeter Height Of Table ±10 Mm 750 Millimeter Dimension Of Leg(Mmxmm) ±5Mm No Legs Storage Unit Number Of Storage Unit Provided Double Storage Width Of Storage Unit ±10Mm 400Mm Depth Of Storage Unit In Mm (±10Mm) 600 Height Of Smallest Storage Unit ±5Mm 50Mm Height Of Medium Storage Unit ±5Mm 175Mm Height Of Largest Storage Unit ±5Mm 280Mm Keyboard Tray Type Of Keyboard Tray N.A Material Of Keyboard Tray And Right Angle L-Type Supporting Bracket N.A Keyboard Adjustablity N.A Fixing Of Supporting Bracket N.A Length Of Telescopic Channe±L0mm N.A Average Weight Of Telescopic Channel ±50Gms N.A Keyboard Front Width±10Mm N.A Keyboard Depth±10Mm N.A Keyboard Height±10Mm N.A Finish Of Exposed Edges Of Keyboard Tray N.A Material Thickness Of Keyboard Tray ±1Mm N.A Footrest Material Of Footrest N.A Length Of Footrest ±10Mm N.A Depth Of Footrest ±10Mm N.A Height Of Footrest ±10Mm N.A Finish Of Exposed Edges N.A Material Thickness Of Footrest ±2Mm N.A , Table Top Glass Thickness 12Mm Type Of Glass Toughened, Heavey, Break Resistance, Smooth, , Diesel Mechanical Hopper Tipper With Three Wheeler Diesel Mechanical Hopper Tipper With Three Wheeler Generic Parametersdrawing Of The Complete Vehicle Indicating Overall Length, Width, Track And Height Will Be Provided On Demand Of Buyer Yes Vehicle Kerb Weight With Fabrication 704 Kilogram Gross Vehicle Weight 975 Kilogram Pay Load Capacity (Gvw-Vkw With Fabrication) 271 Kilogram Gradebility (Degree) 22 Maximum Speed Of Vehicle (Kmph) 60 Max Engine Bhp 9.4 Rated Rpm At Max Engine Hp 3600 Max Torque (N-M) 23.5 Rated Rpm At Max Torque 2200 Vehicle Emission Compliance Bs-Vi Vehicle Mileage (Kmpl) 26 Type Of Fuel Diesel Fuel Tank Capacity (Ltrs) (Kg In Case Of Lpg/Cng) 10.5 Engine Aspiration Natural Cooling System Liquid Anti-Air Pollution Measures Adopted Yes Electronic Control Unit (Ecu) Yes Battery Volt 12 Volt Type Of Exhaust Gas Re-Circulating System Other If Other, Mention The Type Na Lambda Sensor No Type Of Transmission Mechanical Type Of Clutch Multi Disc Wet Type Gearbox Manual No Of Forward/Speed Gears 5 Gear Ratio 26 Type Of Suspension System Hydraulic Telescopic Speedometer Yes Designation Of Front Wheel 4.5-10, 8 Periodical Renewal Designation Of Rear Wheels 4.5-10, 8 Periodical Renewal Type Of Wheel Rims Sheet Metal Type Of Steering Control Handle Bar Location Of Steering Centre Type Of Front Brakes Drum Type Of Rear Brakes Drum Head Lamp High Beam Yes Head Lamp Dipped Beam Yes Front Position Light Yes Tail / Stop Light Yes Number Plate Illumination Light Yes Direction Indicator Lights, Front And Rear Yes Parking Lights Yes Reversing Light(S) Yes Reflex Reflector Rear Yes Reflex Reflector Side(If Provided) Yes Hazard Warning Lamp (Wherever Applicable) Yes Rear-View Mirrors Yes Constructional Parameters Length Of Chassis 3145 Millimeterwidth Of Chassis 1490 Millimeter Wheelbase 2100 Millimeter Rear Overhang 1130 Millimeter Capacity Of Carrier (Cu-M) 1.25 To 2.5 Mention Capacity Of Carrier (Cu-M) 2 Tipping Facility Available Yes Tipping Angle 45 Degree Tipping Operation Hydraulic Lifting Pump , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Type Of E Cart Fully Electric, Battery Operated Motor Driven For Carrying Bins Model Number Of E- Cart Maxi E Cart Colour Of E Cart Green And Blue The E Cart Must Fabricated From Good Quality Steel Properly Painted To Avoid Rusting For More Than 5 Years, Yes Name And Grade Of Steel From Which E Cart Body Framed Ms And Alloy Steel Kerb Weight Of E- Cart (Kg) 247 Kilogram Garbage Carrying Capacity (Kg) 310 Kilogram Run Distance (For A Full Charge Of Battery , To Be Tested With Full Load At Maximum Ais-040 )) (Km) 95 Number Of Bins 2 Capacity Of Individual Bins In Litres (Ltrs) 155 Liter Type Of Chassis For E Cart Tubular Ground Clearance As Per Is : 9435 (Mm) 180 Wheel Base (Mm) 2090 Millimeter Turning Radius (Mm) 2200 Millimeter Power Transmission From Motor Shaft To Wheels Direct Mounting Please Specify The Mechanical Mechanism Otherwise Put Na Na Tipping Facility Yes Tipping Angle 75 Degree Method Of Tipping Hydraulic If Others, Mention The Method Of Tipping Hydraulic Type Of Battery As Per Ais-048 Lead Acid , Ev Grade , Tubular Deep Dischargecapacity Of The Battery Approved By Icat/Arai (Ah) 110 Battery Voltage ,Nominal (Volts) 48V Maximum Overall Dimensions Of The Battery ( L X Wx H ) (Mm3) 410 X 176 X 210 Nominal Filled Weight Of The Battery (Kg) 120 Kilogram Motor Controller ( Must Suitable For Starting, Accelerating, Decelerating, Driving , And Stopping Of E Cart Yes Battery Charger 220/230 V Nominal Input Voltage , High Efficiency Type Charging Current (A) 12 Type Of Motor Brushless Dc Motor Motor Output Power ,48V/60V At Full Load (Watt) 1200 Overall Efficiency Of The E Cart ( To Be Tested At Full Load With Maximum Speed As Per Concerned Ais Standards (%) 85 Gradeability Of E-Cart , ( To Be Tested At Full Procedure As Per Ais -003 Load (Degree) 15 Constructional Seating Facility For Driver Only Length Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 2.8 Width Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct, 2014 (Meters) 1 Height Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.8 Dimensions Of The Cabin Provided For Bins (Mm X Mm X Mm) (Mm3) 1500 X 900 X 1400 Size Of Front Tyre (Mm) 90 X 90 X 12 Size Of Rear Tyre 90 X 90 X 12 Brake Type (Front) Drum Brake Type ( Rear ) Drum Suspension System (Front) Shockers Suspension System ( Rear ) Leaf Spring Reverse Gear Facility Yes The Mounting Of Batteries Yes Vehicle Lighting System Filament Type Instrument Panel Containing Speedometer And Battery Charging Indicator Yes Glass Windshield With Wiper Motor As Approved By Icat/Arai Yes Battery Make As Per Ais :048:2009 Exide If Others Please Specify The Name Of Brand ,Otherwise Put Na (As Per Ais048 2009) Na Equipped With Start And Stop Button, Parking Lights , Back Lights With Reverse Gear Facility Yes Equipped With Fire Extinguisher Yes Equipped With First Aid Box Yes Yellow Color Reflective Tape On Front And Rear Side Of The E Cart Yes E Cart Integration , Yes Performance Parameters Speed Of The E- Rickshaw As Per Cmvr -2014 With Latest Amndmt (To Be Tested With Full Load ) (Kmph) 23 Battery Warranty 1 Year No. Of Free Service 1 Year Compliance Of Centre Of Gravity Of E Cart As A Compulsory Norms For Safety Yes Confirming To Applicable Environmental Test Yes Noise Level Must Be Low During Operation Yes , Diesel Bs-Vi Hopper Tipper Dumper With Capcity 2.5 Cubic Metres With Four Wheeler Generic Parameters Type Of Tipper Garbage Tipper Type Of Tipper If Other Tipper ,Please Declare Type Of Tipper, Garbage Tipper Make Of Chassis 4 Wheelr Chasis Type Of Chassis Frame Conventional Category Of Vehicle For Which Chassis To Be Used Light Capacity Commercial Vehicles Type Of Chasssis Chassis With Facecowl Type Of Fuel Diesel Vehicle Emission Complaince Bs-Vi Fuel Consumption ( Declared By Oem As Certified By Test Agency Under Rule 115Of Cmvr 1989) (Kmpl) 22Speed, Max (Km/Hr) 60Max Engine Power Bhp (Bhp@Rpm) 20Rated Rpm At Max Engine Power 3600 Max Engine Torque (N-M@Rpm) 45 Rated Rpm At Max Engine Torque 3600 Main Engine Aspiration Natural Aspiration No. Of Cylinder In Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Liter Gradeability Of Vehicle With Load( %) 13.2 Ground Clearance (Mm) 160 Millimeter Wheel Base (Mm) 2100 Millimeter Kerb Weight (Kg) 920 Kilogram Gross Vehicle Weight (Kg) 1675 Kilogram Type Of Bis Marked Vehicle Tyre Radial Chassis Transmission System Manual Number Of Speed/ Forward Gears 5 Type Of Steering Manual Turning Radius,Min (Mm) 4300 Millimeter Speed Governers/Ecu Yes Abs Fitted No Front Vehicle Brake Disc Brake Hydraulic Rear Vehicle Brake Drum Brake Hydraulic Type Of Clutch Single Plate Dry Tipping Angle (Degree) 48 Tipper Container Capacity/Volume(Cubic Metres) 2.5 Consructional Parameters Size Of Front Tyres (Mm) 145 R12 Size Of Rear Tyres (Mm) 145 R12 Size Of Wheel (Mm) 304.8 Millimeter Tipper Body Pivot Length (Mm) 1546 Millimeter Tipper Body Length (Mm) 2000 Millimeter Tipper Body Height (Mm) 670 Millimeter Overall Height Of Tipper From Ground (Mm) 1489 Millimeter Body Plate Thickness (Mm) 2 Main Frame Thickness (Mm) 3 Millimeter Hydraulic System Yes Tipping Hydraulic Cylinders(Make) Liftwell/Dantal/Eqv Hydraulic System Driven By Main Engine Tipper Container Material Mild Steel Thickness Of Sheet From Tipper Collector Container Made (Mm) 2 Millimeter Dumping Height (Mm) 550 Millimeter Engine Oil Pressure Level Indicator In Control Panel Yes Fuel Gauge Indicator In Control Panel Yes Engine Cooling Liquid Temperature Indicator In Control Panel Yes Operating Hour Meter No Locking/Unlocking Of Tipper Discharge Container Yes Lowering/Lifting Of Tipper Discharge Container Yes Counter Weight No If Yes Counter Weight (Kg) 0 Kilogram Paint Automotive Paint Performance Parameters Standard Sparewheel And Tool Kit Yes Warranty Time (Month) 12 Month No. Of Free Service (Nos) 3 Battery Warranty (Months) 12 Month Warranty Distance (Km)(Unlimited During Warranty Period) Yes , Vehicle Mountable Fogging Machine Operated Electrical Single Blor Type And Starting Of Machine Type Vehicle Mountable Starting Electrical Material Chemical Tank Material Stainless Steel Fuel Tank Material Crc Steel (Portable) Chemical Tank Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Fuel Tank (Material)/Thickness Crc Steel/1.0Mm Grade Cr4 Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 75/160 (Vehicle Mountable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) 75/160 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 75/20 Other Physical Characteristics Duration To Operate Without Refuel (Hrs) 1.5 Noise Level (Decibel) 109 Durability After 50 Hrs Auto Cut Off For Elimination Of Fire Accident, Non Pressurized Fuel Tank To Control Temperature Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Vehicle Mountable Fogging Machine Operated Electrical Single Blor Machine Type Vehicle Mountable Starting Electrical Material Chemical Tank Material Stainless Steel Fuel Tank Material Stainless Steel Chemical Tank (Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Fuel Tank (Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 37/75 (Vehicle Mountable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) 37/75 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 37/10 Other Physical Haracteristics Duration To Operate Without Refuel (Hrs) 2 Noise Level (Decibel) 102 Durability After 50 Hrs Auto Cut Off For Elimination Of Fire Accident, Non Pressurized Fuel Tank To Control Temperature Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working + 1 Standby) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Cycle Rickshaw Garbage Container Closed Type, Box Size 12 Cft Capacity. Heavy Duty 5 Bar Frame, And Chassis Of 35X35x3.5Mm. Angle Iron With Box Fitted, Box Made Of 1.25 Mm Sheet And Manual Tilting Arrangement, Complete Painted. , Frp Indoor Merry Go Round Dimensions 44 × 44 × 44 Cm , Outdoor Merry Go Round Dimension Product Area 1500 Mm Dia Safe Play Area 2500 Mm Dia , Slide Ladder (Preschool Kit) Virgin Polyethylene And Full Arch Shape Material Slide Ladder Made Up Of Virgin Grade Polyethylene Plastic Virgin Polyethylene Bolts Quality (To Provide Greater Stability To Slide) To Provide As Per Approved Advance Sample Dimension And Mass Overall Length Of The Product (When Assembled) 2415Mm Overall Width Of The Product (When Assembled) 965Mm (Stare Supporting Base) And 432 Mm (Sliding Part) Length Of Sliding Part 1829 Mm Length Of The Stair Panel 1270 Mm Step Rise Of Each Stair 445 Mm Long Minimum Overall Plastic Weight Of Product 16 Kg , Adjustable Basketball Kids Multicolor Assembly Required ?Yes Batteries Required ?No Batteries Included ?No Material Type(S) ?Plastic Remote Control Included? ?No Color ?Red; Blue Product Dimensions ?35 X 45 X 25 Cm; 7.87 Kilograms , Jeevan Drop 100 Ml Sodium Hypochlorite Solution , Tablet-Processor Qualcomm® Snapdragon™ 429 Processor (4 Cores, 4X A53 @2.0 Ghz) Operating System Android 9 Display Type 25.65Cms (10.1) Hd (1280X800) Ips 300Nits Memory 3 Gb Soldered Lpddr3 Hard Drive 32 Gb Emmc Warranty 1 Year On Tablet, 6 Months On Accessories (Carry-In) Ac Adapter 10W Voice Service Voicecall Graphics Integrated Qualcomm® Adreno 504 Graphics Battery Integrated 4850Mah Camera Front 2.0Mp + Rear 5.0Mp Wireless 4G Calling + Wifi Volte & Bluetooth® 4.2 , Ro 15 Ltr Performance Parameters Maximum Input Water Tds Allowed To The System 2000 Type Of Water Purification Technology Ro Aavailability Of Sediment And Activated Carbon Filter Yes Operation Fully Automatic With Auto Cut Off Conformity To Standard For Ultraviolet System Is 14724 (Latest) For Water Purification System Recovery At 27 Degree Centigrade 30-40 Output Water Forming Standard Is 10500 (Latest) Filtration Capacity In Liter/ Hour 15 Provision Of Arsenic Removal Yes Provision Of Floride Removal Yes Provision Of Chloride Removal Yes Alkaline Filter No Storage Tank Inbuilt Type Of Out Put Water Storage Tank Abs Food Grade Storage Tank Capacity (Storage Tank External For Higher Capacity If Required To Be Arranged By Buyer) 8Ltr Minimum Inlet Pressure 0.6 Kg/Cm2 Maximum Inlet Pressure 3.5 Kg/Cm2 Maximum Inlet Temperature 40 Degree Digital Display No Real Time Tds Display No Real Time Ph Display No High Pressure Pump Yes Raw Water/Chemical Raw Water/Chemical Cleaning Pump Yes Micron Filter Yes Total Dissolved Solids Removal Percentage From Ro Membrane 90% Particulate Filter Porosity 20 Micron Pressure Vessel Sand Filter No Pressure Vessel Carbon Filter Yes Pressure Vessel Dual Media Filter No Membrane Housing Yes Body Of Filter Abs Food Grade Auto Cut Yes Number Of Candles 5 Power Supply 230 Volt Single Phase Installation Type Wall Mounted , Mothe Patele 5 Kg Capacity , Mothe Patele Zakan , Sarata Motha , Chamcha Motha , Plate For Break Fast Ss Food Grade , Mothi Parat , Chhoti Parat , Glass , Water Jar , Handa 10 Ltr , Water Tank 50 Ltr Steel , Fruit Set For Kids , Vegitable Set For Kids , Office Table 4X2 , Office Fibre Chair , Abcd Chart Set Of 5 (Abcd, Number, Animal, Flower, Vehicle) , Hand Wash Station 3 Stand Material Ss Grade Ss304,Ss316,Etc. Length 4-5 Feet Width 2-3 Feet Ss Sink 3 Nos Foot Operated Number Of Tap 3 , Sanitary Pad General Napkin / Pad Consists Of Outer Covering With Sufficient Number Of Channels For Leak Protection Yes Type Of Napkin Large With Tab Napkin / Pad Shall Have A Non-Absorbent Barrier On One Side Which Shall Have An Identifying Thread Or Marking Indicating Clearly The Side Of The Barrier Yes Adhesive Back Strip Yes Color Of Pad White Soft,Comfortable,Breathable,Odorless , Anti-Bacterial , Non-Allergic And Bio-Compatible,Bio-Degradable Yes Ph Of The Absorbent Material Of The Napkin As Per Is : 1390-1961 Yes Absorbency With Prescribed Fluid @50 Ml/Min Instead Of 30 Ml Of Cl 5 (1) Of Is : 5405/1980 (First Revision) Reaffirmed 2012, With Amendment 1, Without Leakage On Bottom And Sides Yes Disposability - Disposable Napkin /Pad With Covering Removed Shall Dis Integrate In The Water In Not More Than 5 Minutes When Immersed In 15 Litres Of Water And Stirred Yes Instructions Indicating Removal Of Non-Absorbent Barrier Before Flushing Of Napkin Yes Standard Conformity To Indian Standard Is: 5405-1980(Latest) Except For Absorbency And Size Yes Product Is Bis Marked No Cm/L No(If Product Is Isi Marked) 0 Dimensions Size Of Napkin (Length X Width X Thickness) (In Mm) (240+-10)X (75+-5) X (10 +-1.5) Weight Of Single Pad (In Grams) 10+-1 The Thickness Of The Pad Shall Be Average Of The Height Measured By Stacking 10 Complete Pads Yes Napkin / Pad Should Have Uniform Thickness Throughout Without Any Wrinkle Or Distortion Yes Material Material Of Outer Cover/Layer Rayon Absorbent Filler Material Cellulose Pulp Absorbent Filler Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material Yes The Covering Of The Absorbent Filler Shall Be Of A Good Quality Poly-Perforated Film Sleeve, Gauze Or Non-Woven Fabric With Sufficient Porosity To Permit The Assembled Pad To Meet The Bsorbency Requirement Yes If Cotton Gauze Is Used For Covering Of The Absorbent Filler, It Shall Conform To Is 758-1975 Na , Automatic Sanitiser Dispenser Machine With Battry Branded 5 Ltr (Blue Mount/Dolphy/Euronics) , Alcohol Based Hand Sanitizer/Hand Cleanser 5 Ltr Can Hand Rub Contains Glycerol-1.45%,Hydrogen Peroxide I.P.- 0.125% V/V,Ethanol 60-95% W/W Conformity To Standard Ip , Composition Ethanol Form Of Supply Liquid Shelf Life (In Months) From The Date Of Manufacturing 36 Efficacy Of Killing ~ 100% Germs After Contact Yes Hand Rub Shall Be Clear And Colorless Yes Hand Rub Shall Not Have Any Unpleasant Odour Or Smell Yesspecial Precaution For Storage Room Temperature Special Warnings And Precautions For Use Stay Away From Eyes , Sodium Hypochlorite 50 Kg Can Sodium Hypochlorite Solution (Grade 1) Conforming To Indian Standard Is 11673(Latest) Yes Whether Isi Marked No Cm/L Number(Must Declare,If Isi Marked) Na Food And Drug License Available No Test Report Details Availability Of Test Report From Central Govt/Nabl/Ilac Accredited Lab To Prove Conformity To Specification Yes Test Report To Be Submitted To The Buyer On Demand Yes Food And Drug License Number(Write Na ,If Not Available) Ad/006 Physical Characteristics Form Liquid Colour Pale Yellowish Green Requirements For Sodium Hypochlorite Solution Relative Density(At 25?/25?C) 1.18 Available Chlorine Percent By Mass By Volume 10 Total Chlorine Percent By Volume(As Cl) 10 Free Alkali (As Naoh) (Min)G/L 1 Free Sodium Arbonatena2co3 (Max)G/L 0.5 Iron(As Fe)(Max) Ppm 0.4 Sodium Chlorate 0.05 , Shoes Stand , Dustbeen 10 Ltr , Rocker For Kids - Multi-Color Plastic Horse Ride-On Toy For Kids 0 To 5 Year Material:- This Rocker For Kids Is Made Up Of Non-Toxic Harmless Plastic. , Longevity: These Playgro Rockers For Kids Are A Standout Toy For Both Its Quality And Its Longevity And Is 100% Manufactured In India. High Precision: The Parts Of This Kids Rocker And Ride Are Made Using High Precision Machines. , Kids Toy Tricycle With Heavy Iron Pipe & Plastic Product Type Tricycles For Kids Age 6-12 Months;12-24 Months;2-4 Years Ideal For Infants Color N/A Material Plastic;Iron Power Required Yes Product Dimension 55 Cm X 38 Cm X 59 Cm , Tower Block Game Set For Children To Learn Shapes, Colours And Sizes Keeps Kids Engaged By Building Various Structures Safe For Toddlers To Use; Tested In An Nabl Accredited Lab Against 72 Different Safety And Performance Parameters Is9873 Certified Product Meets Quality And Safety Standards Ideal For Homeschooling, Playgroups And Kindergarten Made In India , Shoes Stand Plastic Made , Play Ball (Set Of 10 Ball ) With Different Colours Suitable For Kids Age 0 To 6 Years , Diesel Mechanical Hopper Tipper With Three Wheeler Certification Arai/Vrde/Icat Chassis Certification Arai/Vrde/Icat No Aaon 0406 F01 Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per Cmvr Rules Yes Registration To Local Rto (Regional Transport Office)/Rta(Regional Transport Authority) By Seller Yes Generic Parameters Drawing Of The Complete Vehicle Indicating Overall Length, Width, Track And Height Will Be Provided On Demand Of Buyer Yes Vehicle Kerb Weight With Fabrication 700 Kilogram Gross Vehicle Weight 974 Kilogram Pay Load Capacity (Gvw-Vkw With Fabrication) 496 Kilogram Gradebility (Degree) 23.8 Maximum Speed Of Vehicle (Kmph) 60 Max Engine Bhp 9.4 Rated Rpm At Max Engine Hp 3600 Max Torque (N-M) 23.5 Rated Rpm At Max Torque 2200 Vehicle Emission Compliance Bs-Vi Vehicle Mileage (Kmpl) 30 Type Of Fuel Diesel Fuel Tank Capacity (Ltrs) (Kg In Case Of Lpg/Cng) 10.5 Engine Aspiration Natural Cooling System Liquid Anti-Air Pollution Measures Adopted Yes Electronic Control Unit (Ecu) Yes Battery Volt 12 Volt Type Of Exhaust Gas Re-Circulating System Cooled If Other, Mention The Type Na Lambda Sensor Yes Type Of Transmission Mechanical Type Of Clutch Multi Disc Wet Type Gearbox Manual No Of Forward/Speed Gears 5 Gear Ratio 26 Type Of Suspension System Spring With Damper Speedometer Yes Designation Of Front Wheel 4.50-10.8Pr Designation Of Rear Wheels 4.50-10.8Pr Type Of Wheel Rims Sheet Metal Type Of Steering Control Handle Bar Location Of Steering Centre Type Of Front Brakes Drum Type Of Rear Brakes Drum Head Lamp High Beam Yes Head Lamp Dipped Beam Yes Front Position Light Yes Tail / Stop Light Yes Number Plate Illumination Light Yes Direction Indicator Lights, Front And Rear Yes Parking Lights Yes Reversing Light(S) Yes Reflex Reflector Rear Yes Reflex Reflector Side(If Provided) Yes Hazard Warning Lamp (Wherever Applicable) Yes Rear-View Mirrors Yes Constructional Parameters Length Of Chassis 3145 Millimeter Width Of Chassis 1490 Millimeter Wheelbase 2100 Millimeter Rear Overhang 735 Millimeter Capacity Of Carrier (Cu-M) 1.25 To 2.5 Mention Capacity Of Carrier (Cu-M) 2 Tipping Facility Available Yes Tipping Angle 45 Degree Tipping Operation Hydraulic Lifting Pump , Fogging Machine Single Blor Type And Starting Of Machine Type Portable Pulse Jet Type Starting Manual Material Chemical Tank Material Hdpe Fuel Tank Material Hdpe (Portable) Chemical Tank (Material)/Thickness Hdpe Density:0.935G/Cc,Polymer Content 99.45% Fuel Tank (Material)/Thickness Hdpe Density:0.935G/Cc,Polymer Content 99.45% Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 10/20 (Portable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) (10/17.5)/5 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 10/1.2 Other Physical Characteristics Duration To Operate Without Refuel (Hrs) 1 Noise Level (Decibel) 102 Durability After 50 Hrs 50 Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Sanitary Pad Vending Machine General Type Of Machine Automatic Type Of Fitting Wall Mountable Color Others Napkin Size For Loading Extra-Large Napkin Fold Trifold Operating Features Coin Operated Multiple Coins Accepted Yes Number Of Napkins/Pads Provided/Loaded With The Vending Machine 35 Multiselection Of Napkin Type Yes Number Of Selection Options 1 Vending Option Vertical Accessibility For Free Vending Utility Service Token Type Of Loading Spiral Vending Napkin Individually Packed Yes Led Illumination Provided For Visibility Of Napkins In The Machine No Visibility Window Yes Pre-Programmable Facility Available Yes Maximum Storage Capacity (Nos)(Nos) 25-50 Digital Counter For Accounting Yes No Stock Message Display Available Yes Built-In Program For Automatic Coin Return/Reject System When There Is No Stock Or No Power No Built-In Program For Automatic Currency Block/Reject System When There Is No Stock Or No Power No Built-In Price Programming Software For Changing The Price Yes Sales Data Retrieval Yes Any Additional Built-In Features Available Easy Access To Use Functional Features Material Of The Outer Body Mild Steel(Ms) Type Of Battery Na Built-In Charger No All Ms Parts Are Duly Painted By Powder Coating Mode Of Function Stand Alone Operating Power Source Electronic Input Power Supply 220V +/- 10%, 50Hz, Single Phase Ac Battery Backup Available No Battery Backup Time (Hrs) Na Power Consumption(Watt) Na Dimensions Width (Mm) 100-200 Depth (Mm) 200-400 Height (Mm) 800-1000 Weight (Kg) 10-20 Thickness Of Ss/Ms Sheet (Mm) 1.2 Thickness Of Frp/Plastic Sheet (Mm) 1-2 , Sanitary Pad Disposal / Incinerator Machine General Type Floor Mountable Purpose Burn Used Sanitary Napkins To Sterile Ash And Stop Automatically Color Operation Mode Electronically Operated, Fully Automatic Loading Type Top Loading Stand Provided Yes Number Of Chambers Two Trap Door Available Yes All Ms Parts Powder Coated Yes Spare Parts Should Be Available For Minimum 5 Years From Date Of Supply Yes All Electrical Parts Are Isi Marked Yes Dimensions Of Main Unit Thickness Of Thermal Insulation Material (Mm) 40 Millimeter Thickness Of Ms/Ss Sheet Of Housing Cabinet (External) (Mm) 1.2 Millimeter Thickness Of Ms/Ss Sheet Of Burning Chamber (Internal) (Mm) (Min) 3 Millimeter Machine Width(Mm) 401-500 Machine Depth (Mm) 501-700 Machine Hight(Mm) 901-1200 Machine Weight(Kg) 51-250 Door Width(Mm) 500-100 Door Height(Mm) 151-200 Thickness Of Door Including Insulation (Mm) 25 Millimeter Internal/Burning Chamber Shape Vertical Cylindrical Flexible Emission Outlet Pipe Dia (Mm) 76 Millimeter Detachable Ash Tray Length (Mm) 301-400 Detachable Ash Tray Width (Mm) 151-200 Detachable Ash Tray Height (Mm) 31-50 Stand Height (Mm) 500 Millimeter Stand Width (Mm) 200-300 Stand Depth (Mm) 100-200 Material Of Machine Unit Material Of Housing Cabinet (External) Mild Steel(Crca) Sheet Material Of Burning Chamber (Internal) Stainless Steel Sheet Of Ss-304 Grade Finish Of Ms Parts Of Cabinet Na Material Of Thermal Insulation High Density Ceramic Fiber Sheet Constructional Features Thermal Insulation Of Burning Chamber Housed In Outer Chamber Yes Burning Chamber Tray Provided Yes Emission Outlet Pipe Location Top Of Machine Means Of Connecting The Unit Outlet With Flue Gas Emission Pipe Flanged Type Of Door Lock Provided Latch Lock Control & Functional Features Temperature Indicator Provided Yes Timer Provided Yes Auto Cut-Off Temperature Display Yes Digital Display To See Actual And Set Temperature Yes Minimum Burning Temperature (Degree C) 800 Burning Capacity Per Day (Number Of Napkins) 700-1000 Burning Capacity At A Time (Number Of Napkins) 26-50 Residue Ash Per Napkin (Gms) 2 Gram Burning Time Of Full Capacity Napkins/Pads (Minutes) (Max) 30 Minute Skin Temperature Of The Unit Under Operation (Deg C) 16-20 Installation, Training, Demonstration And Plumbing Included Yes Electrical And Safety Features Automatic Digital Controller For Time Yes Automatic Digital Controller For Temperature Yes Equipment On/Off Indicator Provided Yes Power Supply 230V +/-10%, 50Hz, Single Phase, Ac Supply Electrical Power Consumption(Watt) 500-1000 Minimum Length Of Power Chord To Be Supplied Along With Machine (Mtr) 2 Meter Type Of Heater Ceramic Heater Containing Coil Power Saver (Auto Power Cut-Off) Yes Safety Mcb Provided (16A To 30A) Yes Protection Against Electric Shock When Checked As Per Is:302-1/2008 Yes Minimum Insulation Resistance (Ir) At 500 Vdc (Mega Ohm) 2 Maximum Electrical Insulation And Leakage Current As Per Is:302-1/2008, (Ma) 0.21 Maximum Earthing Continuity Test When Tested As Per Is:302-1/2008 (Ohm) 0.1 Hv Test At 1000 V Rms For 1 Sec When Tested As Per Is:302-1/2008 No Breakdown Shall Occur During The Test Smoke Control Unit (Scu) Type Of Scu (Smoke Control Unit) Top Mounted Material Of Housing Of Smoke Control Unit (Scu) Mild Steel(Crca) Cabinet Finish Of Ms Parts Of Scu Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Overall Height Of Scu (Mm) 300 Overall Width Of Scu (Mm) 100-300 Overall Depth Of Scu (Mm) 100-300 Number Of Chambers For Filteration Of Smoke Emission Two Both Carbon Control And Foul Odour Control Chambers For Filteration Of Smoke Emission Yes Number Of Filters In Carbon Control Chamber One Type Of Filters In Carbon Control Chamber Ceramic Blanket As A Filter Number Of Filters In Odour Control Chamber One Type Of Filters In Odour Control Chamber Activated Carbon Filter Blower Type Centrifugal, Direct Driven Blower Rpm 1800 Power Supply Of Scu 230V +/-10%, 50Hz, Single Phase, Ac Supply Minimum Length Of Flexible Emission Outlet Pipe To Be Supplied Along With Machine (Mtr) 3 Cost Of Additional Flexible Emission Outlet Pipe, If Required On Actuals To Be Paid By The User Yes Emission Standard For Smoke Conformity To Cpcb, Min Of Environment & Forests Standard, Solid Waste Management Rules (Swm), 2016 Yes Particulates (Half Hourly Average) (Mg/Nm3) (Max) 50 Hcl (Half Hourly Average) (Mg/Nm3) (Max) 50 So2 (Half Hourly Average) (Mg/Nm3) (Max) 200 Construction Of (Half Hourly Average) (Mg/Nm3) (Max) 100 Construction Of (Daily Average) (Mg/Nm3) (Max) 50 Total Organic Carbon (Half Hourly Average) (Mg/Nm3) (Max) 20 Hf (Half Hourly Average) (Mg/Nm3) (Max) 4 Nox (No And No2 Expressed As No2) (Half Hourly Average) (Mg/Nm3) (Max) 400 Total Dioxins And Furans ( 6 To 8 Hours Sampling Basis, Please Refer Guidelines For 17 Concerned Congeners For Toxic Equivalence Values To Arrive At Total Toxic Equivalence) (Ng Teq/Nm3) (Max) 0.1 Cd + Th + Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Hg And Its Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Sb+As+Pb+Cr+Co+Cu+Mn+Ni+V+Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.5 Loss On Ignition (Max) (% Dry Weight Of The Material) 5 , Water Cooler 60 Ltr/80 Ltr/100 Ltrtype Storage Cooling Capacity Litres/Hour 60/80/100 Liters/Hour Storage Capacity 80 /60/100 Liter Maximum Energy Consumption (Watt) 775 Watt For 60 Ltr/Hr Cooling Cap. Power Factor 0.85 Eco-Friendly (Non Cfc Refrigerant) Es Water Tank Sheet Material And Thickness Stainless Steel (Grade Aisi 304) With Puf Insulation, Thickness =0.6 Mm Water Tank Cover And Lid Bottom Sheet Material High Impact Polystrene(Hip) Water Tank Cover And Lid Bottom Sheet Thickness 1.5 Millimeter Cooler Cabinet Sheet Material Stainless Steel (Grade Aisi 304) Cooler Cabinet Sheet Thickness 0.8 Millimeter Warranty On Machine 1 Year , Ss Skid- The Basic Assembly Of Ro Is Mounted On The Skid The Quality Of The Skid Is Made Of Stainless Steel 304 -For Suitable For 1000 Ltr Ro , Raw Water Tank The Filtered Product Water Is Stored In This Tank. This Tank, Too Is Maded Pvc 4 Layer Food Grade Tank Capicity : 3000 Ltr-For Suitable For 1000 Ltr Ro , Treated Water Tank . The Filtered Product Water Is Stored In This Tank. This Tank, Too Is Maded Stainless Steel Water Tank Steel Grade 304 Food Grade Tank Capicity : 1000 Ltr. -For Suitable For 1000 Ltr Ro , Raw Water Pump The Rwp Sucks Water From The Raw Water Tank & Forwards It To The Ro System. Having Capacity Of 3000 Lit Per Hr. Of Self Priming Centrifugal Pump Its Make Of Cri/Groundfos .5 To 1Hp Power Consumption And Pressure 3-4 Kg Per Sq.Cm Etc Complete-For Suitable For 1000 Ltr Ro , Pressure Sand Filter Pressure Sand Filter Is Of Vertical Type Of Diameter 13 Inches And 54 Inches In Height Having Volume Of 110Liters (Pentair) Made Up Of Frp Its Operation Type Is Manual Multiport Valves Etc Complete -For Suitable For 1000 Ltr Ro , Pressure Carbon Filter Pressure Carbon Filter Is Of Vertical Type Of Diameter 13 Inches And 54 Inches In Height Having Volume Of 110Liters (Pentair) Made Up Of Frp Its Operation Type Is Manual Multiport Valves Etc Complete -For Suitable For 1000 Ltr Ro , Anti Scalnt Dosing System -Having Pump In A Set Made Of Edose It Is Electronic Diaphragm Type Its Capacity Is 0.3 Liter Per Minute. Having One Hdpe /Plastic Tank Capacity 80 Liters. -For Suitable For 1000 Ltr Ro , Cartidge Jumbo Filter Housing Cartidge Jumbo Filter Housing In Two Numbers Made Of Food Grade Pp And Diamentions Are 20X4 -For Suitable For 1000 Ltr Ro , Jumbo Micron Cartidge Filter 2 Nos - It Is Made Of Poly Propylene And Having Flow Rate Is 5000 Lit Its Diamentions Are 20 X 4 Its Rating Is 5 Micron In 2 Nos-For Suitable For 1000 Ltr Ro , High Pressure Pump -It Has The Power Of 3Hp It Is Vertical Centrifugal Multi Stage Pump Make Of Cri/Cnp/Shakti Hpp Sucks Water From The Micron Filter & Passes It To The Membrance. -For Suitable For 1000 Ltr Ro , Pressure Tube Ro Module Consisting Of Membrane Housing With Ro Membrane Mounted On Skid It Is Made Of Ecoline (Penteir)Uki/Ss Its Size Is 8X40 In A One Number -For Suitable For 1000 Ltr Ro , R.O Membrane The Membrane Contains Minute Holes Of Size 0.0001 Micron.As A Result No Bacteria Or Any Virus Can Pass Through This It Its Tfc Polymide And Size Is 40 Diameter And 40 Length Make Of Hydronautics Cpa-2 Equivalent -For Suitable For 1000 Ltr Ro , Flow Indicator Flow Indicators In Two Numbers Made Up Of Flot Type Pannel Mountedits Max Temp 40 Degree Cal.And Measured At Ro Module Product Flow And Ro Module Reject Flow-For Suitable For 1000 Ltr Ro , Pressure Gauge -Pressure Gauge Are In Two Nos And Range In Between 0 To 20 Kg / Sq Cm Its Location Are At Ro Module Inlet And Ro Module Reject Flow-For Suitable For 1000 Ltr Ro , High Pressure Switch And Low Pressure Switch- These Are In Two Numbers Locations Are One Before High Pressure Pump And Another Is After. -For Suitable For 1000 Ltr Ro , Pressure Controlled Valvex -These Are In Two Numbers Locations Are One Before High Pressure Pump And Another Is After.-For Suitable For 1000 Ltr Ro , Flushing Switch With Solenoid Valve-Size : 3/4 Inch Working 230Volt Ac.-For Suitable For 1000 Ltr Ro , Electronic Panel Board - The Mains Supply Is Connected To The Panel Board. The Ro Is Controlled By The Panel Board. -For Suitable For 1000 Ltr Ro , Water Dispenser Machine(Water Atm)- (Atm)Aster Make With Digital Panel & Control Sensor And 100 Scratch Cards-For Suitable For 1000 Ltr Ro , Supplying Of Water Controller Sensor (Flot Type) At Site As Directed By Incharge Of Work. -For Suitable For 1000 Ltr Ro , Multiport Valve - Supplying Of Multiport Valve Manually Operational Required For The Pressure Sand Filter Including All Charges At Site As Directed By Incharge Of Work -For Suitable For 1000 Ltr Ro , Other Accecories - Providing Walls/ Ceiling/Floors, Medium C.P.V.C. (Chlorinated Poly Vinyl Chloride) Pipe Having Embossed Isi Mark On It, Of Required Diameter With Screwed / Plain Sockets, Joints, Necessary C.P.V.C. And Brass Fittings Such As Sockets, Back Nuts, Elbows, Bends, Tees, Reducers, Enlargers, Plugs, Clamps Etc. - For Suitable For 1000 Ltr Ro , Water Level Switch Providing Ball Cock Medium Type With Pvc Float Including Sockets And Necessary Fittings And Tested As Per Municipal Requirement, Testing Etc. Complete. 40Mm-For Suitable For 1000 Ltr Ro , Chiller -Cooling Capicity : 300 Lph Working Tempreture 25Degree To 15 Deegree.Cerculation Pump. Chiller Ms Stand. Working Full Automatic. Dry Run Indication - For Suitable For 1000 Ltr Ro , Stabilser -Working Up To Volt Single Phase 160V To 260V. 15Kva -For Suitable For 1000 Ltr Ro , Chiller Plumbing -Pvc Pipe Suitable Of 1000 Ltr Ro And Chiller -For Suitable For 1000 Ltr Ro , Green And Blue Garbage Tri-Cyle Rickshaw Color Green And Blue Seating Capacity 1 Maximum Run Unlimited Usage/Application Waste Collection Size/Dimension 250 Litre X 2 , Standard Aluminium Anodized Crutch Under Arm Crutches 1 Pieces Constructional Parameters Type Of Crutches Crutch Under Arm Crutch Tips Size 7/8 Inch Size Type Standard Size In Centimeter 60 Centimeter Material Of The Type Selected Aluminium Anodized Performance Parameters Type Of Hand Grip Na Height Of Rod Adjustable Upto (Centi Meter) 100 Centimeter Fitted With Non - Slip Rubber Shoe Yes Adujstable Rod Type Yes , Medium Aluminium Crutch Elbow Or Forearm Crutches 1 Pieces Constructional Parameters Type Of Crutches Crutch Elbow Or Forearm Crutch Tips Size 3/4 Inch Size Type Medium Size In Centimeter 50 Centimeter Material Of The Type Selected Aluminium Performance Parameters Type Of Hand Grip L Height Of Rod Adjustable Upto (Centi Meter) 86 Centimeter Fitted With Non - Slip Rubber Shoe Yes Adujstable Rod Type Yes , Plastic First Aid Kit With Medicines Crepe Bandage (Unit-1, Size: 6 Cm) Adhesive Bandage (Unite-1) Adhesive Bandage Round 25Mm (Unite-1, Size: 25 Mm) Pain Relief Gel (Unite-1) Povidone Iodine Ointment(Unite-1) Oral Clinical Thermometer (Unite-1) Antiseptic Liquid (Unite-1) Absorbent Cotton I.P. (Unite-1) Microporous Surgical Tape (Unite-1) Paracip/Parachoice (Unite-1) Gauze Swab (Unite-1) Roller Gauze Unite-1, Size: 7.5 Cm) A Pair Of Scissors (Unite-1, Size: Small) First Aid Leaflet Sticker (Unite-1) , Mortuary Cabinet Freezer Door Material Stainless Steel Refrigeration System- Unitary Type Rtu-06 Number Of Bodies 1 Trolley Material Stainless Steel Body Material Stainless Steel Technical Specification Integral Temperature Gauge Yes Electronic Temperature Indicator Cum Controller No Separate Doors And Handles For Each Chamber Yes Refrigerant Gas R134a Temperature Display Led Temperature Of Mortuary Cabinet(Degree Celsius) -15 Degc To 10 Degc Internal Lighting Vapor Proof Incandescent Lamp Insulation Thickness 50 Millimeter Locking System Standard Key Locks Trolley Sliding On Telescopic Rails No Defrosting Type Na Safety Alarm Visual Insulation Between The Walls High Grade Polyurethane Type Of Alarm Temperature Variation Alarm Internal Drainage Yes Air Circulation Forced Air Circulation Power Suppy Voltage,+/-10% 230 Volt Phase Single Phase Frequency 50 Hertz Dimension & Size Height 800 Millimeter Width 800 Millimeter Height With Cooling Unit And Plain Cement Concrete Platform 800 Millimeter Depth 2000 Millimeter , Pre School Uniform For Girls And Boys Including Tie , Socks And Shies In Anganwadi Center (Check Pattern In Colours As Per Buyers Requirements Description Pinafore With Embedded Collar And Sleeves For Anganwadi, Preschool Childrenutility Girls And Boys Size ( 1 To 5 Yrs Kids ) Dimensions And Pattern As Per Sketch And Dimension Chart For Icds Pre-School Uniforms- Pinafore With Embedded Collar And Sleeves For Children Of Anganwadi Centers In Mharashtra , Sketch And Dimensional Chart For Pre School Uniform- Pinafore Has Been Seen And Understood Yescollar Reinforcement With Reinforcementopening Opening At Back Upto Waist Portion With Buttonsbelt At Waist Portion As Per Buyers Requirementsnumber Of Loops For Belt2 Material-Pinafore Fibre Composition (Warp & Weft) Polyester Staple Fiber ( Psf ) - 70% And Viscose - 30% ( Tolerence ± 5% ) ( Test -Method Is: 3416 , Part - 1 ) Count Of Yarn, Warp (Ne) 2/30S ( Tolerence ± 5% ) ( Test Method - Is: 3442 ) Count Of Yarn, Weft (Ne)15S ( Tolerence ± 5% ) ( Test Method - Is: 3442 ) No Of Threads, Warp ( Ends Per Inch )46 (Tolerance + 5% / - 2.5%) No Of Threads, Weft ( Picks Per Inch ) 46 (Tolerance + 5% / - 2.5%) Mass ( Gram Per Sq Mtr ) 145 To 150 Gram ( Test Method - Is : 1964 ) Weave Plain Material- Sleeves| Top Portion Including Collar ( Embedded Stitched Shirt Fabric ) Fibre Composition - Warp 100% Polyester Filament Yarn ( Pfy ) Full Dull Roto Yarn Fiber Composition - Weft White Yarns - 100% Cotton, Colour Tex X 3, Polyester Stitches Per Dm 35 To 40 Raw Edges, If Any Shall Be Bound By Overlock Stitching Yes Colour Of Pinafore Any Other Colour As Per Buyers Requirement Colour/ Pattern Of Embedded Shirt Fabriccheck Pattern In Colours As Per Buyers Requirements Colour Fastness To Light Change In Colour 4 Or Better ( Test Method - Is : 2454 ) Colour Fastness To Washing Change In Colour 4 Or Better , Stain On Adjacent Fabric 3 - 4 Or Better ( Test Method - Test C (3), Is / Iso 105 - C10 ) Colour Fastness To Perspiration Change In Colour 4 Or Better , Stain On Adjacent Fabric 4 Or Better ( Test Method - Is : 971 ) Colour Fastness To Rubbing Dry 4 Or Better , Wet 3 Or Better (Test Method - Is : 766 ) Logo & Marking Logo Marking As Per Buyers Requirements Type Of Logo Embroidery Number Of Logos 2 Size, Design And Location Of Logo As Per Buyers Requirement Yes , Isi Mark Inverter Tubular Battry Battery Type: Tall Tubular Inverter Battery That Provides Many Years Of Service; Construction: Rugged Construction; Water Level Indicators: 6 Nominal Voltage: 12V; Rated Capacity At 27 Degree Celsius: 200 Ah; Electrolyte Volume: 19.90 Liter; Safety: Overload Protection With Auto Reset Dimensions Of The Container (L X W X H): 502Mm X 191Mm X 440 Mm Dry Battery Weight: 34.3Kg; Filled Battery: 59.0 Kg [Charging Current] Boost Mode Starting Current: 20.20; Boost Mode Finishing Current: 10.10;[Trickle Mode] Min: 168 Ma; Max: 672 Charging: Fast Battery Charging With Adaptive Battery Charging Control Technology Efficiency: Highly Efficient Battery Which Is Ideal For Heavy-Duty Application With Excellent Overcharge Tolerance, Superior Performance During Long Frequent Power Cuts, And Minimum Maintenance , Isi Mark Starter For 5 Hp Submersible Motor Pump Provided With 16 Amps Lt1 Type Contactor 4 Pole [Ac3 Motor Duty] With Easy Replaceable Heavy Duty Fixed And Moving Contacts And Coil Voltage Range Between 280-480 Volts With Easy Replacement Of Coil. Thermal Overload Relay Ensures Overload Protection And Manual Reset Facility [Range ?9~14 Amps For 5 Hp Motor Pump] Starter Provided With Red, Yellow And Blue Neon Bulbs For 3 Phase Power Indication. , Photo With Frame Standard Size For Office As Per Requirement Of Photo Like (Chhatrapati Shivaji Maharaj/Rajmata Jijau/Savitribai Fule/Mahatma Gandhi/Dr.Babasaheb Ambedkar Etc) , Foot Basic Sewing Machine Floral Face Plate And Arm Side Cover Round Stitch Indicator Plate Nickel Plated Needle Bar Auto Trimping Spring Loaded Bobbin Winder For Uniform Winding Of Bobbin Sheet Metal Bobbin Winder , Solar Hi Mast Complete 1 Set Of 20 Watt [20 Watt X 4 Light,Panel 75 Watt Panel X Qty, 20Ah Battery X4, 6 Hr Constand After 6Hr Dim With Motion Sensor =Total 12Hr Backup,Oct 6Mtr Pole, Foundation Bolt, Solar Panel Structure X 4, Light Arm X 4, Labour Charges, Foundation Materail, Wire] , All In One 9W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55, Ip66 Lighting Color Cool White Lumens 1170 Features Inbuilt Battery And Solar Panel Battery Capacity 12.8 V 6 Ah Maximum Lumens 1170 Pole Height5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 30W Color Temperature Range 2700K-6500K Cri 70-82 Material Typemetal) , All In One 12W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 1560 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 12 Ah Maximum Lumens 1560 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , All In One 15W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 2000 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 15 Ah Maximum Lumens 2000 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , All In One 18W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 2000 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 15 Ah Maximum Lumens 2000 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 24 X 48 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 60 X 90 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 90 X 180 With Frame Yes , Isi Mark Starter For 12 Hp Motor Pump Provided With 16 Amps Lt1 Type Contactor 4 Pole [Ac3 Motor Duty] With Easy Replaceable Heavy Duty Fixed And Moving Contacts And Coil Voltage Range Between 280-480 Volts With Easy Replacement Of Coil. Thermal Overload Relay Ensures Overload Protection And Manual Reset Facility [Range ?9~14 Amps For 5 Hp Motor Pump] Starter Provided With Red, Yellow And Blue Neon Bulbs For 3 Phase Power Indication. , Belan Polpat Belan Wooden Chapati Maker Circular Board With Rolling Pin Set Wooden Circular Board Hand Made , Flash Cards Learning & Education Game For Kids Alphabets 52 Cards With Pictures , Aluminium Patila Big 110 Ltr Technical Properties Height 14 Inchgrade Nathickness Lid 2 Inchstrong Handle Withdiameter 40 Inchmaterial Stainless Steeltype Patilathickness Body 3.5 Inchcapacity 110 Liter , Iron Kadhai 150 Litre Technical Properties Thickness Of Kadhai (Mm) 6 Outer Diameter Of Kadhai (Mm) 310 Depth Of Kadhai (Mm) 50 Diameter Of Handle Rod In (Mm) 5 Capacity Of Kadhai( In Litre) 150 , Flash Cards Learning & Education Game For Kids Alphabets 52 Cards With Pictures , Alpha Numeric Plastic Leeter World -Educational Toys For 3-8 Year Olds Girls Boys, 105 Pcs See And Spell Learning Toys, Matching Letter Spelling Game Sight Words Games Educational Preschool Toys , Kids Painting Set Including 1 Mini Pre- Drawn Canvas Panel With Easel And 6 Poster Colors Set With A Painting Brush For Kids Hobby Learning Painting Drawing Art And Craft Diy Sets Gift Sets, , Ceiling Cleaning Broom/ Multi Purpose Broom Stick (Spider / Cob Web) , Magical Handwriting Workbook(4 Book) With (1 Pen+4 Refill)Pen And Refills , 6 Puzzle Board - Birds,Flower, Vegetable Fruits, Transport And Animals (Multicolor) , Flexible Long Garden Water Pipe/Pvc Pipe/Garden Outdoors Pipes With Hose Connector Per Mtr , Chalk Multicolour Writing Chalk, 50 Chalk Sticks In The Box , Chalk White Or Single Colour Writing Chalk, 50 Chalk Sticks In The Box , 36 Pieces Alphabet & Number Floor Mats For Kids, Puzzle Eva Foam Mat For Children , Portable Foldable Wheelchairs For Handicap Patient Old People Children Manual Wheelchair (Self-Propelled Wheelchair) , Vacuum Cleaner Wet And Dry 1150-Watt Powerful Suction And Blower Function , Stethoscope Exterior Finish Brass;Chrome Item Dimensions Lxwxh 26 X 13 X 3 Centimeters Material Metal , Toy Counting Frame Plastic Approx: Width320 Mmheight440 Mm , Blanket (Dimension Approx Length Of The Blanket 230 Centimeter Width Of The Blanket 150 Centimeter Mass Mass 685 Gram Mass Per Blanket 2.3 Kilogram) , Round Table With Chair Set [Front Round Table,L54 X W30 X H20,Kids Chair L13 X W15.5,H20 X 5Qty] , Magnetic Board For Kids [2 Way Board One Sude White & One Side Black Board With Magnetic Alphabets & Number L15 X W20 X H54] , Commercial Slide Ladder (Preschool Kit) Virgin Polyethylene And Full Arch Shape , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 24 X 48 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 60 X 90 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 90 X 180 With Frame Yes , Magazine Stand Revolving Made By Iron With Powder Coated Finish. Easy To Move. Having 16 Pockets. , Curtnes For Windows Material Silk Gsm Quality 300 Material Care Machine Wash,Hand Wash,Dry Clean Lining Included Yes Color As Per Grampanchayat Choice. Patterns Plain Fitting Eyelits Per Sq Mtr , Table Top Glass Thickness 12Mm Type Of Glass Toughened, Heavey, Break Resistance, Smooth, Sqr Per Feet , Stainless Steel Serving Tray (Large Size) For Serving Water And Dishes , Serving Tray Set Of 3 For Coffee/Tea/Breakfast(Printed Design) , Head Pins Fine Satin Pin Craft, Stainless Steel, 1 1/16 Inch Single Box 100 Pcs , Stamp Pad, 110 X 69 Mm - Violet/Red /Black Small , Stamp Pad 155 X95 Mm Violet /Red /Black Small Large , Mirror Plastic Frame Mirror In Square Shape With Shelf Display Area Of Mirror Is 8 Inch By 11 Inch Appx , No Dust Broom Xl For Floor Cleaning, Long Handle Broom Stick For Home Floor Cleaning , Electrical Needle Syringe Destroyer/Needle Destroyer For Hospital And Laboratory , Iron Patient Hospital Basic Examination Table 1830 Mm (L) * 575 Mm (W) * 850 Mm (H) , Iron Patient Hospital Bed Manual White Hospital Bed, Stainless Steel/ Iron With Coted, Size/Dimension: 3 X 6 Feet , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Thap Dhol (S.S),17.2 Inch, Silver Steel Drum Duga Nut & Bolts Dholak , Side Drum Steel 14 Inch With Belt, Stick And 2 Fiber Sheet Free Acoustic 1 Drum Kit Set (Professional, Student) , Standard Cotton Swing For Kids Baby Jhula Washable 1-8 Years With Safety Belt , Magic Speed Rubics Cube 3 * 3 * 3Puzzle(Size 2.5 Cube) , Alcohol Based Hand Sanitizer/Hand Cleanser 5 Ltr Can , Alcohol Based Hand Sanitizer/Hand Cleanser 500 Ml Sprey Bottle , Alcohol Based Hand Sanitizer/Hand Cleanser 100 Ml Sprey Bottle , Alcohol Based Hand Sanitizer/Hand Cleanser 50 Ml Sprey Bottle , Trolley Spekar Driver Type 2 Subwoofer, 2 Atellitesbt/Usb/Sd/Fm/2 Wireless Mike , 5 Layer 30 * 30 Inch Wall Mount Modern Kitchen Utensils Dish Rack Stainless Steel Kitchen Rack Utensil Rack Utensil Stand , Baby Weight Slater ( Hanging Scale Tubular Spring Balance Dynamo Meter Up To 5 Kg With 1 Baby Hanging Bag) , Mixer Grinder 550 Watts With 3 Multi Ouroose Grinding Jars Technical Specification: Voltage Supply 230 V Ac 50 Hz Motor Wattage550 Watts... Rating 30 Minutes. . Speed Control Switch 3 Peed With An Incher. Speed 1500 (Rpm) ( No Load). Body Material Abs Plastic .. Jar Material Stainless Steel .. Blade Material Stainless Steel . Dome Material Polycarbonate .. Rated Liquidizer Jar Capacity 1.50 Ltr. Rated Grinding Jar Capacity 150 Ml ... Normal Load 150 Gm Urad Dal Well Soaked In Water , Resilient Seated Cast Iron Double Air Relief Valves For Water Works Purposes Standard Type With In-Built Isolating Valve(Ds 1) Nominal Pressures Pn 1.6 Specificationconformity To Specification Is 14845:Latest Isi Marked Yes Material Material Of Stem High Tensile Brass-Hsb1 Material Of Low Pressure Seat Ring And Face Ring Epdm Material Of High Pressure Orifice High Tensile Brass Material Of Stem Nut High Tensile Brass Material Of Body Seat Ring Stainless Steel Material Of Bolts Stainless Steel Material Of Nuts Carbon Steel Material Of Gland Packing Jute Material Of Float(High Pressure Orifice) Timber Core With Rubber Coating Material Of Float Guide High Tensile Brass Dimension Nominal Size Of Single Air Valve(Small Orifice) S1 Na Nominal Size Of Single Air Valve(Large Orifice) S2 Na Nominal Size Of Standard Double Air Valve With In-Built Isolating Valve(Ds 1) Na Nominal Size Of Standard Double Air Valve Without Isolating Valve(Ds 2) Na Nominal Size Of Kinetic Air Valve(Dk) Na Direction And Colour Direction Of Operation Clock Wise Colour Black/Blue , Resilient Seated Cast Iron Single Air Relief Valves For Water Works Purposes Standards Specification Conforming To Standard As Per Is:14845 (Latest) Whether Product Is To Be Isi Marked? Yes Cml No If Isi Marked (Write Na If Not Isi Marked) Na Generic Valve Types Single Air Valve Temperature Rating Upto 45 Deg C Maximum Permissible Gauge Working Pressure(Mega Pascal) 1.6 End Connection For Single Air Valve Screwed Type According To Is:554 End Connection For Double Air Valve Flanged Type According To Is:1538 End Connection For Kinetic Air Valve Flanged Type According To Is:1538 Size & Dimension Nominal Size Of Single Air Valve 50 Millimeter Nominal Size Of Single Air Valve 50 Millimeter Nominal Size Of Kinetic Air Valve 50 Millimeter Material Body And Component Parts As Per Clause 9.1 Of Is:14845 (Latest) Coating Material Type B Of Is:341 (Latest) Body Thickness As Per Clause 10.2.4 Of Is:14845 (Latest) Float Diameter As Per Clause 10.5.1 Of Is:14845 (Latest) Marking Marking As Per Clause - 15 Of Is:14845 (Latest) , Swing Check Type Reflux (Non-Return) Valves For Water Works Purposes Type Type Illustration Of Reflux Valve With Inclined Seating And Side By-Pass Arrangement Specification Conformity To Specification Is 5312 (Part 1) Latest Product Is Bis Marked Yes Material Material Of Body , Door , Bearing Holder Grey Cast Iron Material Of Hinge Pin , Door Pin And Door Suspension Pin Stainless Steel Material Of Body Seat Rings Stainless Steel Material Of Door Face Ring Stainless Steel Material Of Bearing Bushes/Bearing Block P.T.F.E Material Of Plugs For Hinge Pin/Air Release Plug Stainless Steel Material Of Gaskets Compressed Asbestos Fibre Material Of Hinges Malleable Cast Iron Dimension Nominal Sizes Of Reflux Valve (Mm) 350 Type Of By-Pass Valves (As Per Is 778) Class 1 For Pn 1.0 Mpa , Rod 4 Feet Zig Zag , Rod 5 Feet Regular , Rod 1 Feet Regular , Standard 28Mm Rubber Weight Plates (2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories , Dumbels Rubber Coated 2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One , Leg Curl / Leg Extension Main Frame: Large Rounded Rectangular Pipe,Cushion: Made Of Pu,Shroud: Metal Shroud With One Step Injection Moulding, Seat Adjustment : 5 Level Adjustment System, Adjustable Range : 0-100Mm, Guide Rail : Made Of Alloy Steel, Pulley : Made Of Engineering Aluminium, Handlebar : Pvc, Weight Plate : Alloy Steel, Guide Rod : Stainless Steel Hollow Pipe, Steel Cable : Max Load 1000 Kgs, Passes 100,000 Rounds,Weight Stacks : 110 Kgs , Bicep Curl Machine ,Pulley: Cast Iron, Ø106x20mm, With Sealed Bearing, Cable: Steel Cable Ø3.5 Jacketed With Pvc Ø5.5Mm Outside Diameter, Powder Coating: 2 Rounds (Silver/Black/Dark Grey Varnish), Tube 1: Oval Elliptical Tube, 60*120Mm T.: 3Mm, Tube 2: Round Tube, Dia 90Mm T.: 3.0Mm, Weight Stack: Made Of Cast Iron, Stuffing: Pu Foam With Synthetic Leather, Wrap Around Gas Assist Seat Adjust, Unilateral Motion, Converging Axis, Right And Left Pre-Stretch Positioning, Contoured Upholstery With Lumbar Support, Size: (L)1000*(W)1500*(H)1600Mm Stack Weight 80Kgs-N.W.: 248Kgs , Adjustable Squat Rack Stand Material Alloy Steel, Product Dimensions ?23.54D X 41.8W X 59.5H, Style ?Adjustable, Item Weight16.32 Kilograms, Number Of Racks ?2, Weight Limit?600 Pounds , Calf Muscle Machine Product Dimensions 152.4D X 61W X 48.3H Cm, Frame Material ?Iron, Weight Limit ?250 Kg , Stepper With Riser For Gym Adjustable Height In 3 Steps:15Cm, 20Cm,25 Cm, Non Slip Top Surface, Dimension: 100 X 38 X 15/20/25Cm, Weight Apx. 8 Kg , Gym Dumbbell Rack Material Iron, Product Dimensions 45D X 40W X 60H Centimeters, Style ?Multi-Level, Item Weight ?17000 Grams, Number Of Racks ?3, Weight Limit ?1000 Kg. , Weight Plates Storage Rack For Gym Material ?Iron, Product Dimensions ?68D X 57W X 119H Cm, Style Weight Plate Tree, Item Weight?2Kg, Number Of Racks 6, Weight Limit 300 Kg, Frame Type Weight Plate Tree. , Yoga Mat For Women And Men Material ?Thermoplastic Elastomers, Product Dimensions 182L X 60W X 0.6Th Cm , Submersible Pump Solar Micro Pumping System Capacity 7.5 Hp Specifications: Model Number As Per Mnre Specification Model-Ii Motor Capacity 7.5 Hp, Pv Array (Wp)M Others, Shut Off Dynamic Head 45 Meter, Types Of Motor Pump Set, Submersible Pump, Pump Set Type, A.C. Induction Motor Pump Set With A Suitable Inverter Pv Array Operation Of Spv Pumping System The Spv Water Pumping System Should Be Operated With A Required Pv Array Capacity Measured Under Standard Test Conditions (Stc). Number Of Modules In Series And Parallel Could Be Used To Obtain The Required Pv Array Power Output24 ,The Power Output Of Individual Pv Modules Used In The Pv Array, Under Stc (In Watts Peak)335, Source Of Pv Module Indigenously Produced Pv Module (S) Containing Mono/ Multi Crystalline Silicon Solar Cells Efficiency Of The Pv Module (%)17 Fill Factor For Pv Module (%)70. Types Of Motor Pump Set Submersible Pump Pump Set Typen A.C. Induction Motor Pump Set With A Suitable Inverter, Numbers Of Poles Of Motor2 Motor Speed(In Rpm)2800. Bore Size 6 Inch, Delivery Size 2.5 Inch, Suction Head For Surface Pump 6 Meter, The Suction/ Delivery Pipe (Gi/Hdpe), Electric Cables, Floating Assembly, Civil Work And Other Fittings Required To Install The Motor Pump Set Yes, Inclusive Material Of Suction Pipe,Isi Marked Hdpe Pipe To Is 4985 Length Of Suction Pipe 45 Meter, Material Of Delivery Pipe Isi Marked Hdpe Pipe To Is 4985 Length Of Delivery Pipe 45 Meter, Pump Material Construction Of The Pump Be Made Using Parts Which Have A Much Higher Durability And Do Not Need Replacement Or Corrode For At Least 1 Years.Marking On Motor Pump The Following Details Should Be Marked Indelibly On The Motor Pump Set A) Name Of The Manufacturer Or Distinctive Logo. B) Model Number. C) Serial Number. , Usb Rechargeable Electric Gas Lighter For Kitchen Gas Stove(Windproof , Flameless, Smarter , Safer -Gas Lighter Chargeable Plasma Technology Generates A Windproof Plasma Annual Rate Contract Pulse Hotter Than Fire , Low Sound, Multi-Purpose Usage To Easily And Safely Fulfill All Your Lighting Needs ; No Butane , No Flame , A Eco Friendly , Cleaner , Easier And Safer Way To Light Usb Rechargeable -Long Lighter For Candle Plazmatic Lighter Comes With The Usb Cord , Could Be Charged With Any Usb Power Port ; Gets Fully Charged In About An Hour And Gives More Than 400 Sparks Or 3 Hours Of Use Per Charge ; Excellent Battery Life ,Multipurpose Use : Flexible Gas Lighter Ideal For Gas , Candles , Kitchens , Stovetops , Grill , Barbeque , Fireplaces , Fireworks , Lanterns , Fragrance Lamps , Pipes , Camping , Outdoors And Much More) , Standard 28Mm Rubber Weight Plates (2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Dumbels Rubber Coated Olympic 2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One Indoor Gym , Leg Curl / Leg Extension Main Frame: Large Rounded Rectangular Pipe,Cushion: Made Of Pu,Shroud: Metal Shroud With One Step Injection Moulding, Seat Adjustment : 5 Level Adjustment System, Adjustable Range : 0-100Mm, Guide Rail : Made Of Alloy Steel, Pulley : Made Of Engineering Aluminium, Handlebar : Pvc, Weight Plate : Alloy Steel, Guide Rod : Stainless Steel Hollow Pipe, Steel Cable : Max Load 1000 Kgs, Passes 100,000 Rounds,Weight Stacks : 110 Kgs Indoor Gym , Bicep Curl Machine ,Pulley: Cast Iron, Ø106x20mm, With Sealed Bearing, Cable: Steel Cable Ø3.5 Jacketed With Pvc Ø5.5Mm Outside Diameter, Powder Coating: 2 Rounds (Silver/Black/Dark Grey Varnish), Tube 1: Oval Elliptical Tube, 60*120Mm T.: 3Mm, Tube 2: Round Tube, Dia 90Mm T.: 3.0Mm, Weight Stack: Made Of Cast Iron, Stuffing: Pu Foam With Synthetic Leather, Wrap Around Gas Assist Seat Adjust, Unilateral Motion, Converging Axis, Right And Left Pre-Stretch Positioning, Contoured Upholstery With Lumbar Support, Size: (L)1000*(W)1500*(H)1600Mm Stack Weight 80Kgs-N.W.: 248Kgs Indoor Gym , Adjustable Squat Rack Stand Material Alloy Steel, Product Dimensions ?23.54D X 41.8W X 59.5H, Style ?Adjustable, Item Weight16.32 Kilograms, Number Of Racks ?2, Weight Limit?600 Pounds Indoor Gym , Calf Muscle Machine Product Dimensions 152.4D X 61W X 48.3H Cm, Frame Material ?Iron, Weight Limit ?250 Kg , Stepper With Riser For Gym Adjustable Height In 3 Steps:15Cm, 20Cm,25 Cm, Non Slip Top Surface, Dimension: 100 X 38 X 15/20/25Cm, Weight Apx. 8 Kg Indoor Gym , Gym Dumbbell Rack Material Iron, Product Dimensions 45D X 40W X 60H Centimeters, Style ?Multi-Level, Item Weight ?17000 Grams, Number Of Racks ?3, Weight Limit ?1000 Kg. Indoor Gym , Weight Plates Storage Rack For Gym Material ?Iron, Product Dimensions ?68D X 57W X 119H Cm, Style Weight Plate Tree, Item Weight?2Kg, Number Of Racks 6, Weight Limit 300 Kg, Frame Type Weight Plate Tree.Indoor Gym , Yoga Mat For Women And Men Material ?Thermoplastic Elastomers, Product Dimensions 182L X 60W X 0.6Th Cm Indoor Gym , Hbnc Kit For Asha Worker Including 1. (Baby Weighing Scale With Sling Dial Type Analogue Display Light Weight Portable 25Kg- 1Nos.). 2. (Digital Thermometer, Pocket Type, Digital Display-1 Nos.) 3.(Digital Timer, Led Display, 2 Size -1 Nos.) 4.(A Suitable Bag To Carry All Things (With Nhm Logo)- 1Nos.) 5.(Cotton 400Gm-1 Nos.) 6.( Gauzes Swab 7.5X7.5 Cm(1 Pack Of 50 Nos)-1 Nos) 7.( Soap And Soap Case-1Nos) 8.( Baby Blanket Locally Made, Woollen Type, Size 120Cm X90cm-1Nos) 9.( Palada/Spoon Stainless Steel-1 Nos) , Multicolour-4K, Matte Vinyl Stickers Educational Like (Abcd, Human Body Parts, Good Habits /Bad Habit Etc.)As Per Requirement Wall Stick Chart For Anganwadi Rate Per Sq Feet , Baby Gift Kit Items Included In The Gift Pack: 1) Baby Shampoo - 100 Ml, 2)Diaper Rash Cream - 20 Gm, 3)Baby Massage Oil - 100 Ml, 4) Gentle Baby Soap - 75 Gm, 5) Baby Lotion - 100 Ml, 6) Baby Powder - 100 Gm, 7) Gentle Baby Wipes 12 Pieces(20 X 21 Cm). Branded Himalaya/Mee Mee/Johnsons/The Moms Construction Of Etc , 1.5 Hp Table Top Atta Chakki Mini Flour Mill Specification:Weight Approx.28, Capacity Approx. 10 To 12 Kg, Stone Size 7 Inch X 20 Mm, Electric Motor 1.5 Hp Single Phase, Rpm 960 Rpm, Voltage 220 V, Power Consumption1.2 Unit, Type Semi Automatic. , Grid Connected Rooftop Solar System 1Kw Solar System Specification: Capacity1 Kw Solar Panel, Qty.335 Watt X 3 Nos., Solar Inverter1 Kw (On Grid) ,Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc. ,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 2 Kw Solar System Specification: Solar System 2 Kw, Solar Panel Qty. 335 Watt X 6 Nos., Solar Inverter 2 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 3 Kw Solar System Specification: Solar System 3 Kw, Solar Panel Qty. 335 Watt X 9 Nos., Solar Inverter 3 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 5 Kw Solar System Specification: Solar System 5 Kw, Solar Panel Qty. 335 Watt X 15 Nos., Solar Inverter 5 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Clorine Dosing Machine Without Stand By System Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Clorine Dosing Machine With Inbuilt Stand By System Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Isi Mark Submersible Rope Yellow Borewell Submersible Pump Rope,Poly More Virgin And Braided Twisted Cord Twine Rope String (16 Mm,Per Meter Meter) , Aluminium Armoured Power Cable-50 Sq Mm 3.5 Core Product Category Aluminium Power Cable, Size Of Conductor 50 Sq Mm, Core 3.5 Core, Conductor Material Aluminium, Colour Black, Overall Diameter (Strip/Wire) 29.5 Mm / 27.9 Mm, Current Rating 140 Amp, Thickness Of Pvc Insulation 1 Mm, Min.Thickness Of Pvc Inner Sheath 0.3 Mm, Nominal Dimensions Of Armoui (Strip / Wire) 4 X 0.8 Mm, Min. Thickness Of Pvc Outer Sheath (Strip / Wire) 1.56 Mm, Max Dc Resistance Ohm 0.641 Ohm, Max. Ac Resistance Ohm 0.82 Ohm, Approx. Reactance At 50Hz Ohms/Km 0.08, Capacitance Mfd/Krr 0.24 , Stainless Steel Kitchen Pincers/Sandshi/Pakkad Style Modern, Product Dimensions 26.5L X 1W Cm, Item Weight ?160 Grams. , 1.5 Hp Table Top Atta Chakki Mini Flour Mill Specification:Weight Approx.28, Capacity Approx. 10 To 12 Kg, Stone Size 7 Inch X 20 Mm, Electric Motor 1.5 Hp Single Phase, Rpm 960 Rpm, Voltage 220 V, Power Consumption1.2 Unit, Type Semi Automatic. , Baby Gift Kit Items Included In The Gift Pack: 1) Baby Shampoo - 100 Ml, 2)Diaper Rash Cream - 20 Gm, 3)Baby Massage Oil - 100 Ml, 4) Gentle Baby Soap - 75 Gm, 5) Baby Lotion - 100 Ml, 6) Baby Powder - 100 Gm, 7) Gentle Baby Wipes 12 Pieces(20 X 21 Cm). Branded Himalaya/Mee Mee/Johnsons/The Moms Construction Of Etc , Multicolour-4K, Matte Vinyl Stickers Educational Like (Abcd, Human Body Parts, Good Habits /Bad Habit Etc.)As Per Requirement Wall Stick Chart For Anganwadi Rate Per Sq Feet , Pvc Pipe Cid Joint Rubber Ring For Pipe Line Material Rubber, Pvc Pipe, Structure Pipe, Hydraulic Pipe Brand, Bew Surface Finish, Paint Coated, Cid Joint Size Up To 1000Mm, 3 4 2.5 6 , Cast Iron Detachable Joints Material Ci Application, Pvc Pipe, Structure Pipe, Hydraulic Pipe Brand, Bew Surface Finish, Paint Coated, Cid Joint Size Up To 1000Mm, 3 4 2.5 6 , Stainless Steel Bowl/Vati/Katori-Size5- (9.5Cm Wide)(Capacity 150 Ml)
Contract Date: Dec 31, 2025 Contract Value : 1.57 Crore
Government Departments No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 53,940
Boards / Undertakings / PSU No of Bidders 6
Contract Date: Ref. Documents Contract Value : 17.52 Lakh
Government Departments No of Bidders 4
Contract Date: Ref. Documents Contract Value : 43.95 Lakh
Boards / Undertakings / PSU No of Bidders 4
Contract Date: Ref. Documents Contract Value : 13.65 Lakh
Government Departments No of Bidders 4
Contract Date: Ref. Documents Contract Value : 19.99 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 1.14 Crore
Local Bodies No of Bidders 2
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 21.05 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Contract Date: Ref. Documents Contract Value : 1.24 Crore
Government Departments No of Bidders 3
Contract Date: Ref. Documents Contract Value : 1.26 Lakh
Boards / Undertakings / PSU No of Bidders 1
47.
Housing Urban and Rular Development #7321703 AOC
Tender For Elv Work Of Critical Care Block At Govt Medical College Manjeri-- 1 STRUCTURED CABLING AND ACTIVE DEVICES 2 od240907/2022_2023 : Supply, installation, testing and commissioning of U/UTP cable - Category 6A , 4 pair, 23 AWG solid copper conductor, 500 MHz, LSZH - with Fluke Cable Analyser through existing conduits including termination, numbering tags, cable ties, ferrules and all accessories required at site to complete the work as per technical specification 3 od240912/2022_2023 : Supply, installation, testing and commissioning of U/UTP cable - Category 6, 4 pair, 23 AWG solid copper conductor, 250 MHz, LSZH - with fluke cable analyser through existing conduits including termination, numbering tags, cable ties, ferrules and all accessories required at site to complete the work as per technical specification 4 1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 5 1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 6 od240920/2022_2023 : Supply and installation of concealed metal backbox with all accessories required at site to complete the work as per technical specification 7 od240922/2022_2023 : Supply, installation, testing and commissioning of CAT6A Information Outlet, RJ45 with all accessories required at site to complete the work as per technical specification 8 od240924/2022_2023 : Supply, installation, testing and commissioning of Cat6 Information Outlet, RJ45 with all accessories required at site to complete the work as per technical specification 9 od240926/2022_2023 : Supply, installation, testing and commissioning of Cat6A 24 port patch panel, fully loaded, with all accessories required at site to complete the work as per technical specification 10 od240928/2022_2023 : Supply, installation, testing and commissioning of Cat6 24 port patch panel, fully loaded, with all accessories required at site to complete the work as per technical specification 11 od240929/2022_2023 : Supply, installation, testing and commissioning of Single or Dual Shuttered Face Plate with all accessories required at site to complete the work as per technical specification 12 od240930/2022_2023 : Supply, installation, testing and commissioning of Cat6A Patch Cord - 2m with all accessories required at site to complete the work as per technical specification 13 od240931/2022_2023 : Supply, installation, testing and commissioning of Cat6 Patch Cord - 2m with all accessories required at site to complete the work as per technical specification 14 od240932/2022_2023 : Supply, installation, testing and commissioning of Cat6 Patch Cord - 1m with all accessories required at site to complete the work as per technical specification 15 od240933/2022_2023 : Supply and installation of casing capping with all accessories required at site to complete the work as per technical specification 16 od240934/2022_2023 : Supply, installation, testing and commissioning of covered GI unperforated cable tray with 200 mm width x 50 mm depth x 1.6 mm thickness (ISI Grade) with thread road, anchor fastener, nut, washer, etc. including all accessories required at site to complete the work as per technical specification 17 od240935/2022_2023 : Supply, installation, testing and commissioning of 24 Port Stackable switch - Layer 2, 24 x 10/100/1000Base-TX ports and 2 x 10G Copper / SFP+ ports with all necessary hardware and accessories required at site to complete the work as per technical specification 18 od240936/2022_2023 : Supply, installation, testing and commissioning of Core Switch - Layer 3, with min 12 x 10G Copper ports and min 4 x 10G SFP+ ports and all necessary hardware and accessories, as required at site to complete the work as per technical specification 19 od240937/2022_2023 : Supply, installation, testing and commissioning of next generation Firewall having a capacity of handling 150 concurrent users with logs, monitoring, bandwidth management, security subscriptions, including software, licenses and all accessories required at site to complete the work as per technical specification 20 od240938/2022_2023 : Supply, installation, testing and commissioning of 42U (800mmx1000mm) Network Rack along with all hardware and accessories required at site to complete the work as per technical specification 21 IP-EPABX 22 od240906/2022_2023 : Supply, installation, testing and commissioning of EPABX system expandable upto 120 IP extensions, 2 PRI licenses, 2 nos of 10 channel SIP trunk licenses, including all hardware, software, 1 no of desktop based operator console and all accessories required at site to complete the work as per technical specification 23 od240913/2022_2023 : Supply, installation, testing and commissioning of license of IP extensions with all accessories required at site to complete the work as per technical specification 24 od240916/2022_2023 : Supply, installation, testing and commissioning of Standard IP telephone including all accessories as required at site to complete the work as per technical specification 25 od240923/2022_2023 : Supply, installation, testing and commissioning of 24 Port Stackable PoE+ switch - Layer 2, 24 x 10/100/1000Base-TX PoE+ ports and 2 x 10G Copper / SFP+ ports with all necessary hardware and accessories required at site to complete the work as per technical specification
Contract Date: May 08, 2025 Contract Value : 24.33 Lakh
Government Departments No of Bidders 3
48.
Housing Urban and Rular Development #7309716 AOC
Tender For Development Of Taluk Hospital Malayinkeezhu Elv- 1 STRUCTURED CABLING AND ACTIVE DEVICES 2 od128597/2023_2024 : Supply, installation, testing and commissioning of U/UTP cable - Category 6A, 4 pair, 23 AWG solid copper conductor, 500 MHz, LSZH - with Fluke Cable Analyser through existing conduits including termination, numbering tags, cable ties, ferrules and all accessories required at site as per technical specification 3 od128604/2023_2024 : Supply, Installation, Testing and Commissioning of U/UTP cable - Category 6, 4 pair, 23 AWG solid copper conductor, 250 MHz, LSZH - with Fluke Cable Analyser through existing conduits including termination, numbering tags, cable ties, ferrules and all accessories required at site as per technical specification 4 1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 5 od128608/2023_2024 : Supply, installation, testing and commissioning of metal back box in surface or recess with all accessories required at site including cutting the wall and making good the same in case of recessed back box complete as per technical specification 6 od128612/2023_2024 : Supply, installation, testing and commissioning of CAT6A information Outlet, RJ45 with all accessories required at site including termination complete as per technical specification 7 od128616/2023_2024 : Supply, Installation, Testing and Commissioning of CAT6 information Outlet, RJ45 with all accessories required at site including termination complete as per technical specification 8 od128617/2023_2024 : Supply, installation, testing and commissioning of Category 6A 24 port patch panel, fully loaded with I/Os, including termination as required at site complete as per technical specification 9 od128618/2023_2024 : Supply, installation, testing and commissioning of Category 6 24 port patch panel, fully loaded with I/Os, including termination as required at site complete as per technical specification 10 od128619/2023_2024 : Supply, installation, testing and commissioning of Single / Dual shuttered face plate with all accessories as required at site to complete the work as per technical specification 11 od128620/2023_2024 : Supply, installation, testing and commissioning of Cat6A patch cord - 2m, including all accessories as required at site to complete the work as per technical specification 12 od128621/2023_2024 : Supply, installation, testing and commissioning of Cat6 Patch Cord - 2m including all accessories as required at site to complete the work as per technical specification 13 od128622/2023_2024 : Supply, installation, testing and commissioning of Cat6 Patch Cord - 1m including all accessories as required at site to complete the work as per technical specification 14 od128623/2023_2024 : Supply, installation, testing and commissioning of PVC casing capping with all accessories required at site complete as per technical specification 15 od128624/2023_2024 : Supply, installation, testing and commissioning of unperforated Hot Dipped Galvanised Iron cable tray of size - 200 mm width x 50 mm depth x 1.6 mm thickness with Cover, in convenient sections, joined with connectors, suspended from the ceiling with GI suspenders including GI bolts and nuts, etc and all accessories bends, tees, reducers, etc., required at site complete as per technical specification 16 od128625/2023_2024 : Supply, installation, testing and commissioning of 24 port Stackable switch - Layer 2, 24 x 10/100/1000Base-TX ports with 2 x 10G Copper / SFP+ ports including all necessary hardware, software and accessories as required at site to complete the work as per technical specification 17 od128626/2023_2024 : Supply, installation, testing and commissioning of 24 port Core Switch - Layer 3 Switch with min 12 x 10/100/1000Base-TX ports and min 4x10G Copper / SFP+ ports with all necessary hardware & accessories, etc. as required at site complete as per technical specification 18 od128627/2023_2024 : Supply, installation, testing and commissioning of Next Generation Firewall having capacity of handling 100 concurrent users with logs, monitoring, bandwidth management, security subscriptions, including software, licenses and all accessories required at site to complete the work as per technical specification 19 od128628/2023_2024 : Supply, installation, testing and commissioning of 42U Floor mount Network Rack, size - 800 x 1000mm, along with all necessary hardware and accessories required at site complete as per technical specification 20 od128629/2023_2024 : Supply, installation, testing and commissioning of 27U Floor mount Network Rack, size - 600 x 650mm, along with all necessary hardware and accessories as required at site to complete the work as per technical specification 21 IP-PBX 22 od128598/2023_2024 : Supply, installation, testing and commissioning of IP-PBX system with 2PRIs and 10 channel SIP trunk licenses, expandable up to 120 IP extensions, including all hardware, software, 1 no of desktop based operator console, with all accessories required at site to complete the work as per technical specification 23 od128605/2023_2024 : Supply, installation, testing and commissioning of licence of IP extensions with all accessories as required at site to complete the work as per technical specification 24 od128609/2023_2024 : Supply, installation, testing and commissioning of Standard IP Phones with all accessories required at site complete as per technical specification 25 od128614/2023_2024 : Supply, installation, testing and commissioning of 24 port PoE+ Stackable switch - Layer 2, 24 x 10/100/1000Base-TX PoE+ ports and 2 x 10G Copper / SFP+ ports including all necessary hardware, software and accessories as required at site complete as per technical specification 26 IP SURVEILLANCE 27 od128601/2023_2024 : Supply, installation, testing and commissioning of 2MP varifocal IP camera, PoE, IP66 rated with all accessories as required at site to complete the work as per technical specification 28 od128602/2023_2024 : Supply, installation testing and commissioning of 24 port PoE switch - Layer 2 with 2 SFP ports with all accessories required at site complete as per technical specification 29 od128607/2023_2024 : Supply, installation, testing and commissioning of 16 channel Network Video Recorder, RAID5, H.265, throughput - 320Mbps or above, with SAS/Enterprise HDDs for 30 days archiving (minimum 8TB to be considered), including a client workstation and monitoring software with all hardware, software, cabling and other accessories as required at site complete as per technical specification. The Contractor shall submit storage calculation for video recording at 15 frame/second in minimum HD resolution. 30 od128611/2023_2024 : Supply, installation, testing and commissioning of 55 commercial display 24/7 with HDMI, USB ports with all accessories required at site complete as per technical specification 31 ATTENDANCE SYSTEM 32 od128599/2023_2024 : Supply, installation, testing and commissioning of biometric, password and proximity card based Attendance Machine with software and all accessories as required at site to complete the work as per technical specification 33 PUBLIC ADDRESS AND EVACUATION SYSTEM 34 od128600/2023_2024 : Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Speaker cable Single pair, 2-core, 1.5 sqmm 35 od128603/2023_2024 : Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. 36 od128606/2023_2024 : Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required. 37 od128610/2023_2024 : Supply, installation, testing and commissioning of 120W power amplifier with all accessories required at site complete as per specification 38 od128613/2023_2024 : Supply, Installation, Testing and Commissioning of PA System Controller capable of managing up to 6 individual zones with BGM, announcement, automatic emergency message facility, integration with Fire alarm system and all accessories required at site complete as per technical specification. 39 od128615/2023_2024 : Supply, installation, testing and commissioning of Paging Microphone with multi tone chime and multi channel zone selector with all accessories as required at site to complete the work as per technical specification
Contract Date: May 03, 2025 Contract Value : 36.78 Lakh
Government Departments No of Bidders 2
TenderDetail
Loading tenders