View Bid Results For Magnesium Ducts Tenders

We found 51 Bid Results related to magnesium ducts tenders. You can find Contractor details who won magnesium ducts tenders along with contract details in Bid awards announcements section.

Indian Tenders
1
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
32
14
5
Tender Publishing Platform
1
50
State / UT
10
18
16
3
3
3
3
2
1
1
1
Contract Value
20
1
23
7
Publish Date
0
0
0
0
0
Sector
7
21
14
11
2
1
1
1
Ownership
4
34
14
2
1
Within keyword
Active filters:
Showing 1–2 of 51 tenders matching your filters
1.
Health and Family Welfare #10506364 Price Bid
Supply Of Medicine Under Mnnry Rate Contract For Supply Of Medicine Under Mnnry , Chest Drainage Catheter ( I.C.D. ) ( Thoracic Catheter ) Size : Fg: 16, 20, 24, 28, 32, 36 & 40. , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein -O-Line ) Size 10 Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein -O-Line ) Size 100 Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein -O-Line ) Size 150 Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein -O-Line ) Size 50 Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 ( Details In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 ( Details In Rc ) , Abdominal Suction Set , Absorbable Gelatin Sponge 80 X 50X 10Mm ( Details In Rc ) , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property ( Details In Rc ) , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) , Absorbent Cotton Wool Ip 500 Gm , Acebrophylline Tablet 100 Mg , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg , Acetazolamide Tab Ip 250Mg , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Acyclovir Cream 5% , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Acyclovir Oral Suspension Ip 400Mg / 5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Adenosine Injection Ip 6 Mg / 2Ml , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use , Albendazole Oral Suspension Ip 400 Mg / 10Ml , Albendazole Tablets Ip 400 Mg ( Detail In Rc ) , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) , Allopurinol Tablets Ip 100 Mg , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Alpha+Lipoic Acid + Leycopen +Multivitamin And Miltiminerals , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amikacin Inj Ip 100 Mg , Amikacin Inj Ip 250 Mg , Amikacin Inj Ip 500 Mg , Aminophylline Inj Ip 25 Mg / Ml , Amiodarone Hydrochloride Inj 50 Mg / Ml , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amitriptyline Tab Ip 25Mg Film Coated , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mg , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Ampicillin Cap Ip 500Mg , Ampicillin Injection Ip 500 Mg , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) , Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) , Anti Cold15 Ml , Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg , Anti-Oxidants Capsule ( Beta Carotene-10 Mg, Vit-E 25Mg, Vit-C 100 Mg, Copper 1.5 Mg, Managanese 1.5 Mg, Zinc 7.5 Mg, Selenium 150 Microgram ) , Aprebitant 125 / 80 , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) , Ascorbic Acid Tab Ip 500 Mg , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg , Atenolol Tab Ip 25 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Atorvastatin Tablets Ip 40 Mg , Atracurium Inj 10 Mg / Ml , Atropine Eye Ointment Ip 1% , Atropine Sulphate Injection 0.6Mg / Ml , Atropine Sulphate Ophthalmic Solution Usp 1% , Azathioprine Tab Ip 50 Mg , Azithromycin Tab 100 Mg Dispersible Tabs , Azithromycin Tab Ip 500 Mg , Azithromycin Tablets Ip 250Mg , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 ( Details In Rc ) , Baby Diaper Small Size For Infents , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Bain Circuit Adult , Bain Circuit Ped. , Bains Circuit Paediatric / Adult , Beclomethasone Inhalation Ip 200 Mcg / Dose , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Betahistine Tab Ip 16 Mg , Betahistine Tab Ip 8 Mg , Betamethasone Dipropionate Cream Ip 0.05% , Betamethasone Lotion Ip 0.05 O / O , Betamethasone Sod Phos Inj Ip 4Mg / Ml , Betamethasone Tab Ip 0.5Mg , Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) , Bipolar Prosthesis Set , Bisacodyl Tab Ip 5 Mg , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) , Blood Administration Set Blood Transfusion Set ( Details In Rc ) , Bone Cement , Bone Wax Sterilised , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Budesonide Nebulizer Suspension 0.25Mg / Ml , Budesonide Powder For Inhalation 200 Mcg , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg , Bupivacaine Inj Ip 0.5% , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) , Caffein 10 Mg , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size , Calamine Lotion Ip 100Ml , Calcitriol Capsules Ip 0.25 Mcg , Calcium30 Ml , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Calcium Gluconate Inj Ip 10% ( Iv Use ) , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml , Carbamazepine Tab Ip 100 Mg ( Film Coated ) , Carbamazepine Tab Ip 200 Mg ( Film Coated ) , Carbimazole Tabs Ip 5 Mg ( Film Coated ) , Carboplatin Injection Ip 150 Mg , Carboplatin Injection Ip 450 Mg , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg / Ml , Carboxymethylcellulose + Glycerin , Carboxymethylcellulose Eye Drops Ip 0.5% , Carvedilol Tablet 3.125 Mg , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Cefadroxil Tablet 250 Mg , Cefadroxil Tablet 500 Mg , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) , Cefotaxime Inj Ip 250 Mg , Cefotaxime Injection Ip 1 G , Cefpodoxime 100 Mg , Cefpodoxime Dispersible Tab 50 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G / Vial , Ceftriaxone Inj Ip 250 Mg / Vial , Ceftriaxone Inj Ip 500Mg / Vial , Cefuroxime Axetil Tab Ip 250 Mg , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O , Cetirizine Syrup Ip 5Mg / 5 Ml , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetrimide Cream Ip 15 Gm , Chemotherapy Port &Non-Coring Needles ( Pediatric ) ( Detail In Rc ) , Chemotherapy Port And Non-Coring Needles ( Adult ) ( Detail In Rc ) , Chlorambucil Tab Ip 5 Mg , Chloramphenicol +Polymycine , Chloramphenicol +Polymycine + Dexamethason , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size , Chloramphenicol Eye Drops Ip 0.5 0 / 0 , Chlordiazepoxide Tablets Ip 10Mg , Chlorhexidine Gluconate Solution 5% 250 Ml , Chlorhexidine Mouthwash Ip 0.2 O / O , Chloroquine Phosphate Inj Ip 40 Mg / Ml , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated , Chlorpheniramine Maleate Tab Ip 4Mg , Chlorpromazine Inj. Ip 25Mg / Ml , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) , Cholecalciferol Granules 60, 000 Iu / Gm , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 ( Details In Rc ) , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 ( Details In Rc ) , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 ( Details In Rc ) , Chymotrysin 1 Lacr More Unit , Cinnarizine Tablet Ip 75 Mg , Cinnarizine Tablets Ip 25 Mg , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp , Ciprofloxacin Eye Drops Ip 0.3 O / O W / V , Ciprofloxacin Injection Ip 200Mg / 100Ml , Ciprofloxacin Ophthalmic Ointment Usp 0.3% , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Cisplatin Inj Ip 10 Mg / 10 Ml , Cisplatin Inj Ip 50 Mg / 50 Ml , Citicoline 250 / 500 Mg , Citicoline 400 Mg , Clarithromycin 500Mg , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Clindamycin Phosphate Gel Usp 1 O / O , Clindamycin Phosphate Injection Ip 300 Mg , Clobazam Tablet / Capsule 10 Mg , Clobazam Tablet / Capsule 5 Mg , Clobetasol Propionate Cream Ip 0.05 O / O , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Clonazepam Tablet 0.5 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Clopidogrel Tab Ip 75 Mg , Close Circuit , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, ( All Size ) , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 ( Details In Rc ) , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 ( Details In Rc ) , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops , Clotrimazole Cream Ip 2% W / W , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) , Clotrimazole Vaginal Tab Ip 500Mg , Cloxacillin Sodium Inj Ip 500Mg , Coal Tar 6% & Salicylic Acid 3% Ointment , Colistine 10 Lakh Unit , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O , Compound Benzoin Tincture Ip , Compound Sodium Lactate Inj. Ip , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Conjugated Estrogen Tabs Usp 0.625 Mg. , Corrugated Drainage Sheet - All Sizes ( Details In Rc ) , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Co-Trimoxazole Tablet Ip ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S. , Cough Syrup / Expectorant ( 50 ) Ml , Cream Luliconazole 1% W / W , Creep Bandage 10 Inch , Creep Bandage 2 Inch , Creep Bandage 4 Inch , Creep Bandage 6 Inch , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cyclosporin Capsule Usp / Ip 50 Mg , Cyproheptidine 4 Mg , Cytarabine Injection Bp 500Mg , Dacarbazine Injection 500 Mg Usp / Bp , Danazol Cap Ip 50 Mg , Dapagliflozin 10Mg , Daunorubicin Inj Ip 20 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Deflazacort 6 Mg , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) , Dexamethasone Inj Ip 8Mg / 2Ml , Dexamethasone Tab Ip 0.5 Mg , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml , Dextrose Inj Ip 10% , Dextrose Inj Ip 25% W / V , Dextrose Inj Ip 5% , Diagnostic Sticks For Multiple Use Strip ( Sugar, Ketone, Albumin ) , Diagnostic Strip For Glucose, Ketone , Diagnostic Strip For Glucose, Protein , Diaper Adult ( S / M / L ) , Diastasepepsin With Simethicone 15 Ml , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) , Diazepam Tab Ip 5 Mg , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg , Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) , Diclofence Prolonged Release Tablet Ip 100 Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml , Dicyclomine Inj Ip 10 Mg / Ml , Dicyclomine Tab Ip 10 Mg , Diethylcarbamazine Tab Ip 100 Mg , Digestive Enzyme 15 Ml , Digoxin Inj Ip 0.25 Mg / Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe , Diphtheria Antitoxin 10000 Iu , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) , Dobutamine Inj Ip 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Ip 250 Mg / 5Ml ( Amp ) , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) , Domperidone Suspension Ip 5Mg / 5Ml , Domperidone Tab Ip 10 Mg , Dopamine Hydrochloride Inj Ip 40 Mg / Ml , Dorzolamide Eye Drop , Doxorubicin Inj Ip 50 Mg / 25 Ml , Doxycycline Cap Ip 100 Mg , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml , Drotaverine Tab Ip 40 Mg , Dulexitim 20Mg , Dulexitim 30Mg , Dutasteride Tablet 0.5 Mg , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg , Ecg Electrode ( Detail In Rc ) , Elastic Adhesive Bandage Bp 1M X 10Cm Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) , Enalapril Maleate Tab Ip 2.5Mg , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tablets Ip 10 Mg , Endotracheal Tube, Cuff - Size 4.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 5 Details In Rc , Endotracheal Tube, Cuff - Size 6 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 7 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 7.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 8 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 8.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 9 ( Details In Rc ) , Endotracheal Tube, Cuff- Size 6.5 ( Details In Rc ) , Endotracheal Tube, Cuffed - Size 4 ( Details In Rc ) , Endotracheal Tube, Plain - Size 2.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 3 ( Details In Rc ) , Endotracheal Tube, Plain - Size 3.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 4 ( Details In Rc ) , Endotracheal Tube, Plain - Size 4.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 5.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 6 ( Details In Rc ) , Endotracheal Tube, Plain - Size 7 ( Details In Rc ) , Endotracheal Tube, Plain - Size 7.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 8 ( Details In Rc ) , Endotracheal Tube, Plain - Size 8.5 ( Details In Rc ) , Endotracheal Tube, Plain -Size 6.5 ( Details In Rc ) , Enoxaparin Sodium Inj Ip 60 Mg , Escitalopram Tab Ip 10 Mg , Esomeprazole 40 Mg , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) , Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) , Ethinyloestradiol Tabs Ip 50 Mcg , Etomidate 10Ml , Etomidate 20 Mg , Etoposide Inj Ip 100 Mg , Etoricoxib Tab Ip 120Mg , Etoricoxib Tablet 90 Mg , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size , Face Mask, Disposable ( Details In Rc ) , Factor Ix Concentrate ( Purified ) Ip 600 I.U. ( Human Coagulation Factor Ix ) , Febuxastat 40 Mg , Febuxastat 80 Mg , Fenofibrate Capsules / Tab Ip 200 Mg , Fentanyl Citrate Injection 50Mcg / Ml , Fentanyl Citrate Injection Ip 2 Ml , Feracrylum 1% W / W Sterile Solution 100 Ml , Ferric Carbo Maltose 500Mg / 10 Ml Vial , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Flavoxate Tablets Ip 200 Mg ( Coated Tablet ) , Fluconazole Eye Drops 0.3% , Fluconazole Tablets Ip 150Mg , Flunarizine Tab 5 Mg , Fluorouracil Inj Ip 250 Mg / 5Ml , Fluoxetine Cap Ip 20 Mg , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 11 To 17.5 , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 18 To 24 , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 24.5 To 28.5 , Foleys Catheter No. 14 ( Detail In Rc ) , Folic Acid Tab Ip 5 Mg , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Framycetin Sulphate Cream 1 O / O 100 Gm Pack , Framycetin Sulphate Cream 1 O / O 30Gm Pack , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) , Fusidic Acid Cream Ip 2% , Gabapentine Tablet / Capsule 100Mg , Gabapentine Tablet / Capsule 300Mg , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) , Gatifloxacin And Prednisolone Eye Drop , Gemcitabine For Injection 200 Mg , Gemcitabine For Injection Ip 1Gm , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) , Gentian Violet Topical Solution Usp 1O / O , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) , Glibenclamide Tab Ip 5 Mg , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 1Mg , Glimepiride Tab Ip 2 Mg , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) , Glipizide Tab Ip 5Mg , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 .5 Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Glucosamine + Chloride +Msm 750+50+250 Mg , Glucosamine + Diacerein 50 Mg Tab , Gluteraldehyde Solution 2% , Glycerin Ip 100 Ml , Glycerin Ip 400 Gm , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Glycopyrrolate Inj Ip 0.2 Mg / Ml , Griseofulvin Tab Ip 125 Mg , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% , Haloperidol Inj Ip 5 Mg / Ml , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Halothane Bp , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) , Hepatitis B Immunologlobin Injection Ip 100 I.U , Homatropine Eye Drops Ip 2% , Human Albumin Solution Ip 20% , Human Anti D Immunoglobulin 150 Mcg , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) , Human Chorionic Gonadotropin Injection Ip 5000 I.U. , Human Rabies Immunoglobulin Inj 150 Iu / Ml , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Hydrochlorothiazide ( 12.5Mg ) + Olmesartan Medoxomil ( 20Mg ) , Hydrochlorothiazide ( 12.5Mg ) + Olmesartan Medoxomil ( 40Mg ) , Hydrochlorthiazide Tab Ip 12.5 Mg , Hydrochlorthiazide Tab Ip 25Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) , Hydroxychloroquine Sulphate Tablets 200Mg , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion , Hydroxyprogesterone Inj Ip 250Mg / Ml , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml , Hydroxyzine 15 Ml , Hydroxyzine Tab Ip 25 Mg , Hyoscine Butyl Bromide Tablets Ip 10Mg , Hyoscine Butylbromide Inj Ip 20 Mg / Ml , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml , Ibuprofen Tab Ip 200 Mg ( Coated ) , Ibuprofen Tab Ip 400 Mg ( Coated ) , Ifosfamide Injection Ip / Bp / Usp 1Gm , Imatinib Tab Ip 400Mg , Imipramine Tab Ip 25 Mg ( Coated Tab ) , Imipramine Tab Ip 75 Mg ( Coated ) , Indomethacin Cap Ip 25 Mg , Infant Feeding Tube Size 10Fg ( Details In Rc ) , Infant Feeding Tube Size 5Fg ( Details In Rc ) , Infant Feeding Tube Size 8Fg ( Details In Rc ) , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable ( Details In Rc ) , Inj Poractant Alpha 80 Mg / Ml In Pack Of 1.5 Ml ( Detail In Rc ) , Inj. Diltiazem , Inj. Mephenteramine , Inj. Ns 3% 100 Ml , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml , Ipratropium Powder For Inhalation Ip 40 Mcg , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg , Isoflurane Usp , Isophane Insulin Inj Ip 40 Iu / Ml , Isosorbide Dinitrate Tab Ip 5 Mg , Isosorbide Mononitrate Tabs Ip 20 Mg , Isoxsuprine Inj Ip 5 Mg / Ml , Isoxsuprine Tab Ip 20 Mg , Itraconazole Cap 100 Mg , K Wire, Length 375 Mm; 1.6Mm ( Details In Rc ) , K Wire, Length 375 Mm; 1.8Mm ( Details In Rc ) , K Wire, Length 375 Mm; 1Mm ( Details In Rc ) , Ketamine Inj Ip 50 Mg / Ml , Ketoconazole Cream 2% , Ketorolac 10 Mg , Ketorolac Tablet 10 Mg , Knee Cap , Labetalol Hcl Inj Ip 20Mg / 4Ml , Labetalol Tab Ip 100Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg ) , L-Asparaginase Inj 10000 Iu , Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml , Levetiracetam Injection 500Mg / 5Ml , Levetiracetam Oral Solution / Suspension 100Mg / Ml , Levetiracetam Tablet Ip 500 Mg , Levoceitrizine Tablet 5Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levofloxacin Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) , Levofloxacin Tablets Ip 250 Mg , Levofloxacine 100 Ml , Levofloxacine 250 Mg , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) , Levothyroxine Sodium Tablet 25 Mcg , Lidocaine Hcl Topical Solution Usp 4% , Lignocain 10 % Spray , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg , Lignocaine Gel Ip 2% , Lignocaine Inj Ip 2 O / O , Lignocaine Ointment 5 O / O , Liquid Paraffin Ip 100 Ml , Liquid Paraffin Ip 400 Ml , Lisinopril Tab Ip 2.5 Mg , Lisinopril Tab Ip 5 Mg , Lisinopril Tablets Ip 10 Mg , Lithium Carbonate Tab Ip 300 Mg , Loperamide Tab Ip 2 Mg , Lorazepam Inj Ip 2 Mg / Ml , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , L-Ornithine L-Aspartate 10 Ml , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) , Losartan Tab Ip 25 Mg , Losartan Tab Ip 50 Mg , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) , Magnesium Sulphate Inj. Ip 500Mg / Ml ( 50%W / V ) , Mannitol Inj Ip 20% W / V , Mecobalamin Inj 500 Mcg / Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Mefenamic Acid Tablets Bp 500 Mg , Mefenamice Acid 100Mg / 5Ml , Melphalan Tab Ip 5 Mg , Mephentermine 30Ml / Ml , Mercaptopurine Tab Ip 50 Mg , Meropenem Inj Ip 500 Mg , Meropenem Inj. Ip 1Gm , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets Ip ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg , Metformin Tab Ip 500 Mg ( Film Coated ) , Methotrexate Inj Ip 50 Mg / 2 Ml , Methotrexate Tab Ip 2.5 Mg , Methotrexate Tablets Ip 10 Mg , Methyl Cobalmine Tablet 1500Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Methyldopa Tab Ip 250Mg Film Coated , Methylergometrine Inj Ip 0.2 Mg / Ml , Methylergometrine Tab Ip 0.125 Mg , Methylpredinisolone 16 Mg , Methylpredinisolone 8 Mg , Methylprednisolon Injection 40Mg , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml , Metoclopramide Inj Ip 10Mg / 2Ml , Metoclopramide Tab Ip 10 Mg , Metoprolol Succinate Extended Release Tablets Ip 50 Mg , Metoprolol Tablets Ip 25 Mg , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml , Metronidazole Inj Ip 500 Mg / 100Ml , Metronidazole Tablets Ip 200 Mg ( Film Coated ) , Metronidazole Tablets Ip 400 Mg ( Film Coated ) , Miconazole Nitrate Cream Ip 2% , Midazolam Inj Ip 1 Mg / Ml , Mifepristone Tab Ip 200Mg , Misoprostol Tab Ip 200 Mcg , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) , Montelucast+Levocetrizine 10+5 Mg , Morphine Sulphate Inj Ip 10Mg / Ml , Moxifloxacilline+ Dyliprednate Eye Drop , Moxifloxacilline+ Prednisone Eye Drop , Moxifloxacin400 Mg , Moxifloxacin 100Ml , Moxifloxacin And Prednisolone Eye Drop , Mucus Extractor Sterile ( Details In Rc ) , Multi Vitamin Syrup 10Ml , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection ) , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size , Naloxone Inj Ip 0.4Mg / Ml , Nandrolone Decanoate 50 Mg Inj , Naproxen Tablet Ip 250Mg , Naproxen Tablet Ip 500Mg , Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc ) , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics ( Details In Rc ) , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) , Natamycin 5% , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) , Nebulization Mask Adult ( Detail In Rc ) , Nebulization Mask Paediatric ( Detail In Rc ) , Needle ( All Size 14 To 27 G ) , Nelaton Catheter Size 14 Fg ( Detail In Rc ) , Neomycin Bacitracin And Sulphacetamide Powder ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Neostigmine Inj Ip 0.5 Mg / Ml , Neostigmine Injection Ip 2.5Mg / 5Ml , Neostigmine Tab Ip 15 Mg , Nicorandil 48 Mg , Nicumalone 1 Mg , Nicumalone 4 Mg , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) , Nitrazepam 10 Mg , Nitrofurantoin Tab Ip 100Mg , Nitroglycerin Inj 5 Mg / Ml , Niv Mask ( Noninvasive Ventilation Mask ) Adult Large Size Single Use For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Adult Large Size Single Use For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Adult Medium Size Single Use For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Adult Medium Size Single Use For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Paediatric Small Size Single Use With Bronchoscopy And Co2 And O2 Port With Chin Support ( Detail In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Noradrenaline Injection Ip 2 Mg / Ml , Norethisterone Tab Ip 5 Mg , Norfloxacin Tab Ip 400Mg Film Coated , Normal Saline 500 Ml Glass Bottle , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size , Ofloxacin Oral Suspension Ip 50Mg / 5Ml , Ofloxacin Tab Ip 200 Mg , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O , Oitment Mupirocin Ip 2% , Olanzapine Tab Ip 5 Mg , Olaptadine & Ketrolac Eye Drop , Omeprazole Cap Ip 20 Mg , Ondansetron 2 Ml , Ondansetron 8 Mg , Ondansetron Inj Ip 2Mg / Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Ondensetrone 30 Ml , Ors Powder Ip , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oxaliplatin Injection Usp 50 Mg , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) , Oxygen Mask ( Adult ) , Oxygen Mask ( Pediatric ) , Oxytocin Inj Ip 5 Iu / Ml , Paclitaxel Inj Ip 100 Mg , Paclitaxel Inj Ip 260 Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paracetamol 650 Mg , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) , Paracetamol Infusion Ip 1% W / V 100Ml Size , Paracetamol Inj. 150 Mg / Ml , Paracetamol Syrup Ip 125 Mg / 5Ml ( Detail In Rc ) , Paracetamol Tab Ip 500 Mg , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) , Pentoprazole 40 + Levosulpiride 150 Mgcap , Pentoprazole Inj 40 Mg , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable ( Details In Rc ) , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable ( Details In Rc ) , Peritonial Dialysis Solution Ip , Permethrin Cream 5% , Permethrin Lotion 5% , Phenazopyridine Tablet 5 Mg , Pheniramine Inj Ip 22.75Mg / Ml , Phenobarbitone 20Mg / 5Ml, 100 Ml , Phenobarbitone Inj Ip 200Mg / Ml , Phenobarbitone Tab Ip 30 Mg , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% , Phenytoin Injection Bp 50Mg / Ml , Phenytoin Oral Suspension Ip 25Mg / Ml , Phenytoin Tab Ip 100 Mg ( Film Coated ) , Pilocarpine 0.5 %V / V , Pioglitazone Tab Ip 15 Mg , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg , Piracetam 200 Mg , Plaster Of Paris Bandage 10Cm X 2.7Mts , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Polymyxin B 10000Iu / Gm + Neomycin 3400Iu / Gm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Potassium Chloride Inj. 0.15 Gm / Ml , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml , Povidone Iodine Ointment 5% 15 Gm , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) , Povidone Iodine Solution Ip 10 % , Povidone Iodine Solution Ip 5 % 500 Ml , Povidone Iodine Solution Ip 5% 100Ml Bottle , Powder Clotrimazole 1% W / W 30 Gm , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg , Prazosin Tablets ( Extended Release ) 2.5 Mg , Prednisolone 10 Ml , Prednisolone Tab Ip 20 Mg , Prednisolone Tab Ip 5 Mg , Prednisolone Tablet Ip 10 Mg , Pregabalin Cap Ip 75 Mg , Pressure Monitoring Line / High Pressure Extension Line ( Details In Rc ) , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size , Progesterone Inj 200 Mg / 2Ml , Promethazine Inj Ip 25Mg / Ml , Promethazine Syrup Ip 5 Mg / 5Ml , Promethazine Tab Ip 25 Mg , Propofol Inj Ip 10 Mg / Ml , Propranolol Tab Ip 40 Mg , Propylthiouracial 100 Mg , Pyridostigmine Tablet Usp 60 Mg ( Each Tablet Contains Pyridostigmine Usp 60 Mg ) , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Quinine Dihydrochloride Inj Ip 300 Mg / Ml , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose , Racecadotril 100Mg , Ramipril Tablets Ip 2.5 Mg , Ranitidine Hcl Injection Ip 50Mg / 2Ml , Ranitidine Tab Ip 150Mg Film Coated , Ranitidine Tab Ip 300Mg Film Coated , Ravici 5 Ml , Rebeprazole +Levosulpiride 20+75 Mg , Repaglinide And Voglibose ( 0.5+0.3 ) , Reteplase 18 Mg , Rh-Erythropoetin Inj Ip 2000Iu , Rifaximin 500Mg , Ringer Acetate Infusion 500 Ml , Risperidone Tab 1 Mg , Risperidone Tab 2Mg , Rosuvastatin 160Mg + Finofib 10Mg , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large ( Details In Rc ) , Rubber Examination Gloves, Non-Sterile, Extra Small ( Details In Rc ) , Rubber Examination Gloves, Size Medium ( Details In Rc ) , Rubber Examination Gloves, Size Small ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 10 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 12 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 16 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 18 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size:14 ( Details In Rc ) , Salbutamol Inhalation 100 Mcg / Dose , Salbutamol Nebuliser Solution Bp 5 Mg / Ml , Salbutamol Syrup Ip 2Mg / 5Ml , Salbutamol Tab Ip 2 Mg , Salbutamol Tablet Ip 4 Mg , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) , Sanitary Napkin Beltless With Wings ( Details In Rc ) , Sanitary Napkin Beltless ( Details In Rc ) , Sanitary Pads Belt Type ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 18G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 20G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 22G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 24 G ( Details In Rc ) , Serratiopeptidase 10Mg , Sertraline Tab Ip 50 Mg , Sevoflurane , Silodocin 4 Mg Cap , Silodocin 8 Mg Cap , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Sitagliptin 50Mg , Skin Graft Knife Blade ( Sterile ) ( Details In Rc ) , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) , Sodium Bicarbonate Inj Ip 7.5% W / V , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) , Sodium Chloride 0.45% W / V Polypack 500 Ml , Sodium Chloride 5% , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Sodium Valproate Inj 100 Mg / Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg , Sotalol Hydrochloride Tablet Usp / Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40Mg ) , Spironolactone Tab Ip 25Mg , Spironolactone Tablets Ip 50 Mg , Standard Pama Intra Ocular Lenses ( Details In Rc ) 11 To 17.5 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 18 To 24 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 24.5 To 28.5 , Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G ( Detail In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G ( Details In Rc ) , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G ( Details In Rc ) , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch ( Details In Rc ) , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch ( Details In Rc ) , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml ( Detail In Rc ) , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm ( Details In Rc ) , Streptokinase Injection 15 Lac Units Ip , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) , Suction Catheter, Sterile. Size: F G-10 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-12 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-14 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-16 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-18 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-20 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-22 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-6 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-8 ( Details In Rc ) , Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc ) , Sulphasalazine 500 Mg , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) , Surgical Blade Sterile, Size 11 ( Details In Rc ) , Surgical Blade Sterile, Size 15 ( Details In Rc ) , Surgical Blade Sterile, Size 22 ( Details In Rc ) , Surgical Blade Sterile, Size 23 ( Detail In Rc ) , Surgical Cap Disposable ( For Surgeons ) ( Details In Rc ) , Surgical Cap, Disposable ( For Nurses ) ( Details In Rc ) ( Details In Rc ) , Surgical Spirit Ip ( 100 Ml ) , Surgical Spirit Ip ( 500 Ml ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 ( Details In Rc ) , Suture Needles Curved And Cutting Size 1-5 ( Details In Rc ) , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) , T. Ritodrine 10 Mg , Tamoxifen Tab Ip 10 Mg , Tamsulosin Hcl Tablets / Capsule 0.4 Mg , Telmisartan Tablets Ip 40 Mg , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg ) , Tenaligliptin Tablet 20Mg , Terbinafine Cream 1%W / W ( 10 Gm Tube ) , Terbinafine Hydrochloride Tablet 250 Mg , Terbutalin , Terbutaline Tablets Ip 2.5 Mg , Tetanus Immunoglobulin Ip 250 Iu / Vial , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) , Thiamine Tablets Ip 100 Mg , Thiocolchicosite 4 Mg , Thiopentone Inj Ip 0.5 G , Thyroxine Sodium Tablets Ip 100Mcg , Thyroxine Tablets Ip 50 Mcg , Timolol Eye Drops Ip 0.5 O / O W / V , Tinidazole Tab Ip 300 Mg ( Film Coated ) , Tinidazole Tab Ip 500 Mg ( Film Coated ) , Tirofiban 0.5 Mg , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O , Tobramycin Eye Drops 0.3% [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) , Torsemide Inj 10 Mg / Ml , Torsemide Tab 10 Ip Mg , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes ( Details In Rc ) , Tracheostomy Tube, Plain - All Sizes ( Details In Rc ) , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg / Ml , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size , Tranexamic Acid Tablets Ip / Bp 500 Mg , Travoprost Eye Drops Ip 0.004 O / O , Tretenoin Cream Usp 0.025% , Trifluperazine Tab Ip 5 Mg Coated , Trihexyphenidyl Hcl Tab Ip 2 Mg , Tropicamide + Phenlyephrine Eye Drop , Tropicamide Eye Drop Ip 1O / O , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- ( Details In Rc ) , Umbilical Catheter For New Born, All Sizes - ( Details In Rc ) , Umbilical Cord Clamp ( Details In Rc ) , Urethral Catheter 90 ( Fg-14 ) Made Up Of Medical Grade Pvc ( Detail In Rc ) , Urethral Catheter 91 ( Fg-10 ) , Made Up Of Medical Grade Pvc ( Detail In Rc ) , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml ( Details In Rc ) , Urine Collecting Bag, Disposable 2000 Ml ( Details In Rc ) , Urokinase Injection 5 Lac Unit ( Lyophilized ) , Ursodeoxycholic Acid Tablets Ip 300 Mg , Vaccum Suction Set, 2.5 Meter Length ( Detail In Rc ) , Valethamate Bromide Inj 8Mg / Ml , Vancomycin For Intravenous Infusion Ip 500 Mg , Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) , Verapamil Tab Ip 40 Mg Film Coated , Vildagliptine 50Mg , Vinblastine Inj Ip 10Mg / 10Ml , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) , Vitamin D ( 600000 Iu ) , Vitamin D3 Oral Solution 60000 Iu , Vitamin E Capsule 400 Mg , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) , Vitamin K-1 ( Phytomenadione ) Ip 1Mg / 0.5Ml Injection ( Detail In Rc ) , Vitamind3 400 Iu , Vitamind3 800 Iu , Voglibose 0.2 Mg Tab , Voglibose 0.3 Mg Tab , Warfarin Sodium. Tab Ip 5Mg , Water For Inj Ip , Xylometazoline Nasal Drops Ip 0.1% , Zinc 50Mg , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Zink 20 Mg, 100 Ml , Zoledronic Acid Injection Ip 4Mg / 100Ml 100Ml Size , Zolpidem Tablet 5 Mg
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
2.
Health and Family Welfare #10497612 Price Bid
Tender For Yearly Rate Contract For Drugs And Medicine Tender For Yearly Rate Contract For Drugs And Medicine , 01. Anaesthetics , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg , Bupivacaine Inj Ip 0.5% , Halothane Bp , Isoflurane Usp , Ketamine Inj Ip 50 Mg / Ml , Lignocaine Ointment 5 O / O , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg , Lignocaine Gel Ip 2% , Lignocaine Inj Ip 2% , Propofol Inj Ip / Bp / Usp 10 Mg / Ml , Thiopentone Inj Ip 0.5 G , Sevoflurane , Atropine Sulphate Injection 0.6Mg / Ml , Liquid Medical Oxygen ( Lmo ) , 02. Analgesic Antipyretices And Anti Inflammatory Drugs , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) , Fentanyl Citrate Injection Ip 2 Ml , Ibuprofen And Paracetamol Tablets Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Tab Ip 200 Mg ( Coated ) , Ibuprofen Tab Ip 400 Mg ( Coated ) , Morphine Sulphate Inj Ip 10Mg / Ml , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) , Paracetamol Syrup Ip 125 Mg / 5Ml , Paracetamol Tab Ip 500 Mg , Paracetamol Inj. 150 Mg / Ml , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg / Ml , Indomethacin Cap Ip 25 Mg , Diclofence Prolonged Release Tablet Ip 100 Mg , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml , Diclofenac Sod + Paracetamol Tablets Diclofenac Sod 50 Mg + Paracetamol 325 , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% , Etoricoxib Tab Ip 120Mg , Mefenamic Acid Tablets Bp 500 Mg , Fentanyl Citrate Injection 50Mcg / Ml , Naproxen Tablet Ip 500Mg , Naproxen Tablet Ip 250Mg , Etoricoxib Tablet 90 Mg , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size , Diclofenac Sodium Aqueous Injection 75 Mg / Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip1% W / V 100Ml Size , Ketorolac Tablet 10 Mg , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) , 03. Antiallergics And Drugs Used In Anaphylaxis , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use , Betamethasone Tab Ip 0.5Mg , Chlorpheniramine Maleate Tab Ip 4Mg , Dexamethasone Inj Ip 8Mg / 2Ml , Dexamethasone Tab Ip 0.5 Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) , Hydroxyzine Tab Ip 25 Mg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Pheniramine Inj Ip 22.75Mg / Ml , Prednisolone Tab Ip 5 Mg , Promethazine Syrup Ip 5 Mg / 5Ml , Promethazine Inj Ip 25Mg / Ml , Promethazine Tab Ip 25 Mg , Betamethasone Sod Phos Inj Ip 4Mg / Ml , Prednisolone Tablet Ip 10 Mg , Prednisolone Tab 20 Mg , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetirizine Syrup Ip 5Mg / 5 Ml , Levoceitrizine Tablet 5Mg , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexametasone Ip 4 Mg ) , 04. Antidotes And Other Substances Used In Poisoning , Naloxone Inj Ip 0.4Mg / Ml , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml , 05. Anti Epileptic Drugs , Carbamazepine Tab Ip 200 Mg ( Film Coated ) , Carbamazepine Tab Ip 100 Mg ( Film Coated ) , Phenobarbitone Tab Ip 30 Mg , Phenytoin Injection 50Mg / Ml , Phenytoin Oral Suspension Ip 25Mg / Ml , Phenytoin Tab Ip 100 Mg ( Film Coated ) , Sodium Valproate Inj 100 Mg / Ml , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Phenobarbitone Inj Ip 200Mg / Ml , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg , Clobazam Tablet / Capsule 5 Mg , Clobazam Tablet / Capsule 10 Mg , Levetiracetam Tablet 500 Mg , Levetiracetam Oral Suspension 100Mg / Ml , Levetiracetam Injection 500Mg / 5Ml , Gabapentine Tablet / Capsule 100Mg , Gabapentine Tablet / Capsule 300Mg , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Release Tablet Contains Lamotrigine Ip 50 Mg ) , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) , Lacosamide Tablet 100 Mg ( Each Film Coated Tablet Contains Lacosamide 100 Mg ) , Topiramate Tablet Ip 25 Mg ( Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , 06. Anti Infective Drugs , Acyclovir Oral Suspension Ip 400Mg / 5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Albendazole Oral Suspension Ip 400 Mg / 10Ml , Albendazole Tablets Ip 400 Mg , Amikacin Inj Ip 100 Mg , Amikacin Inj Ip 500 Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mg , Amphotericin B Inj Ip 50 Mg , Ampicillin Injection Ip 500 Mg , Azithromycin Tab 100 Mg Dispersible Tabs ( 3 Tab Strip 10X3x3 ) , Azithromycin Tablets Ip 250Mg , Azithromycin Tab Ip 500 Mg , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) , Cefotaxime Injection 1 G , Cefotaxime Inj Ip 250 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G / Vial , Ceftriaxone Inj Ip 250 Mg / Vial , Ceftriaxone Inj Ip 500Mg / Vial , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Chloroquine Phosphate Inj Ip 40 Mg / Ml , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml , Ciprofloxacin Injection Ip 200Mg / 100Ml , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Clotrimazole Cream Ip 2% W / W , Clotrimazole Vaginal Tab Ip 500Mg , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Diethylcarbamazine Tab Ip 100 Mg , Doxycycline Cap Ip 100 Mg , Fluconazole Tablets Ip 150Mg , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) , Griseofulvin Tab Ip 125 Mg , Itraconazole Cap 100 Mg , Meropenem Inj Ip 500 Mg , Metronidazole Inj Ip 500 Mg / 100Ml , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml , Metronidazole Tablets Ip 200 Mg ( Film Coated ) , Metronidazole Tablets Ip 400 Mg ( Film Coated ) , Norfloxacin Tab Ip 400Mg Film Coated , Ofloxacin Tab Ip 200 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Quinine Dihydrochloride Inj Ip 300 Mg / Ml , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) , Ampicillin Cap Ip 500Mg , Nitrofurantoin Tab Ip 100Mg , Cloxacillin Sodium Inj Ip 500Mg , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml , Ofloxacin Oral Suspension Ip 50Mg / 5Ml , Tinidazole Tab Ip 300 Mg ( Film Coated ) , Tinidazole Tab Ip 500 Mg ( Film Coated ) , Piperacillin + Tazobactum For Injection Usp 4Gm+500Mg , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml , Cefpodoxime Dispersible Tab 50 Mg , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) , Meropenem Inj. Ip 1Gm , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Amikacin Inj Ip 250 Mg , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) , Aztreonam Injection Usp 500 Mg , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) , Cefuroxime Axetil Tab Ip 250 Mg , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Levofloxacin Tablets Ip 250 Mg , Linezolid Tablets Ip 600 Mg , Linezolid Inj 200Mg / 100Ml , Mefloquine Tablets Ip 250 Mg , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) , Vancomycin For Intravenous Infusion Ip 500 Mg , Vancomycin For Intravenous Infusion Ip 1 Gm , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) , Co-Trimoxazole Tablet ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) , Aztreonam Injection 1Gm , Framycetin Sulphate Cream 1 O / O 30Gm Pack , Framycetin Sulphate Cream 1 O / O 100 Gm Pack , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) , Amoxycillin Tablet 250 Mg + Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Piperacillin Injection 2 Gm + Tazobactom 250 Mg Ip , Ceftriaxone Injection 1 Gm + Tazobactum 1.25 Mg , Cefadraxil Tablet 250 Mg , Cefadraxil Tablet 500 Mg , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size , Levofloxacin Tablets Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) , Faropenem Tablet Sodium 200 Mg ( Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg ) , Clindamycin Phosphate Injection Ip 300 Mg , Imipenem + Cilaatatin Injection 500Mg / 500Mg Ip Powder For Solution , Polymixin Sulphate B Injection Usp 5 Lac I.U. , Meropenem Injection Ip 250 Mg , Colistimethate Injection Ip 1M Iu Powder For Solution , Voriconazole Injection 200 Mg / Vial , Terbinafine Hydrochloride Tablet 250 Mg , Valganciclovir Tablet 450 Mg , Entecavir Tablet Ip 0.5 Mg ( Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg ) , Ganciclovir Sodium Injection 500 Mg ( Lyophilized Powder For Reconstitution ) , 07. Anti Neoplastic And Immuno Suppressant Drugs Palliative Care , Azathioprine Tab Ip 50 Mg , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) , Chlorambucil Tab Ip 5 Mg , Cisplatin Inj Ip 50 Mg / 50 Ml , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cytarabine Injection Bp 500Mg , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Doxorubicin Inj Ip 50 Mg / 25 Ml , Etoposide Inj Ip 100 Mg , Fluorouracil Inj Ip 250 Mg / 5Ml , L-Asparaginase Inj 10000 Iu , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Methotrexate Inj Ip 50 Mg / 2 Ml , Methotrexate Tab Ip 2.5 Mg , Paclitaxel Inj Ip 260 Mg , Paclitaxel Inj Ip 100 Mg , Tamoxifen Tab Ip 10 Mg , Vinblastine Inj Ip 10Mg / 10Ml , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Carboplatin Injection 150 Mg , Carboplatin Injection 450 Mg , Cisplatin Inj Ip 10 Mg / 10 Ml , Dacarbazine Injection 500 Mg Usp / Bp , Filgrastim Injection ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcg , Gemcitabine For Injection 200 Mg , Gemcitabine For Injection 1Gm , Ifosfamide Injection Ip / Bp / Usp 1Gm , Imatinib Tab 400Mg , Methotrexate Tablets Ip 10 Mg , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg , Oxaliplatin Injection Usp 50 Mg , Cyclosporin Capsule Usp / Ip 50 Mg , Procarbazine Hydrochloride Capsule Usp 50 Mg ( Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg ) , Bendamustine Injection 100 Mg , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) , Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100 Mg ) , Bortezomib Injection 2Mg , Abiraterone Acetate Tablet Ip 250 Mg ( Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg ) , Lomustine Capsule Ip 40 Mg ( Each Capsule Contains Lomustine Ip 40 Mg ) , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) , Bevacizumab Injection 400 Mg , Bevacizumab Injection 100 Mg , Cyclophosphamide Tablet Ip 50 Mg ( Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg ) , Gefitinib Tablet Ip 250 Mg ( Each Film Coated Tablet Contains Gefitinib Ip 250 Mg ) , Mycophenolate Mofetil Capsule Ip 250 Mg ( Each Capsule Conatin Mycophenolate Mofetil Ip 250 Mg ) , Tacrolimus Capsule Ip 0.5 Mg ( Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg ) , Mycophenolate Sodium Tablet 360 Mg ( Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg ) , Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) , Zoledronic Acid Injection Ip 4Mg / 100Ml 100 Ml Size , Dasatinib Tab 100 Mg , 08. Anti Parkinsonism Drugs , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Trihexyphenidyl Hcl Tab Ip 2 Mg , Bromocriptine Tablets Ip 2.5 Mg , 09. Drugs Affecting The Blood , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) , Enoxaparin Sodium Inj Ip 60 Mg , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) , Human Albumin Solution Ip 20% , Rh-Erythropoetin Inj 10000 Iu , Rh-Erythropoetin Inj 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Factor Ix Concentrate ( Purified ) 600 I.U. ( Human Coagulation Factor Ix ) , Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial ) , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion , Tranexamic Acid Tablets Ip / Bp 500 Mg , Warfarin Sodium. Tab Ip 5Mg , Vitamin K-1 ( Phytomenadione ) 1Mg / 0.5Ml Injection ( Detail In Rc ) , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial , Recombinant Coagulation Factor Viia 1Mg , Recombinant Coagulation Factor Viia 2Mg , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size , Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) , Feracrylum 1% W / W Sterile Solution 100 Ml , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size , Recombinant F Ix 500 Iu With Diluent , 3Rd Generation Recombinant F Viii 250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , 10. Cardio Vascular Drugs , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amiodarone Hydrochloride Inj 50 Mg / Ml , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Clopidogrel Tab Ip 75 Mg , Digoxin Inj Ip 0.25 Mg / Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dobutamine Inj Ip / Bp 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Usp250 Mg / 5Ml ( Amp ) , Dopamine Hydrochloride Inj 40 Mg / Ml , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tab Ip 2.5Mg , Isosorbide Dinitrate Tab Ip 5 Mg , Isosorbide Mononitrate Tabs Ip 20 Mg , Lisinopril Tab Ip 5 Mg , Losartan Tab Ip 50 Mg , Magnesium Sulphate Inj. 500Mg / Ml ( 50%W / V ) , Methyldopa Tab Ip 250Mg Film Coated , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) , Nitroglycerin Inj 5 Mg / Ml , Propranolol Tab Ip 40 Mg , Streptokinase Injection 15 Lac Units , Verapamil Tab Ip 40 Mg Film Coated , Labetalol Tab Ip 100Mg , Labetalol Hcl Inj Ip 20Mg / 4Ml , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) , Atenolol Tab Ip 25 Mg , Enalapril Maleate Tablets Ip 10 Mg , Lisinopril Tablets Ip 10 Mg , Lisinopril Tab Ip 2.5 Mg , Losartan Tab Ip 25 Mg , Adenosine Injection 6 Mg / 2Ml , Atorvastatin Tablets Ip 40 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Fenofibrate Capsules / Tab Ip 200 Mg , Isoprenaline Injection Ip 2Mg / Ml , Metoprolol Tablets Ip 25 Mg , Metoprolol Succinate Extended Release Tablets Ip / Usp 50 Mg , Noradrenaline Injection Ip 2 Mg / Ml , Prazosin Tablets ( Extended Release ) 2.5 Mg , Telmisartan Tablets Ip 40 Mg , Urokinase Injection 5 Lac Unit ( Lyophilized ) , Ramipril Tablets Ip 2.5 Mg , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Clonidine Hydrochloride Tablet Ip 0.1 Mg ( Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg ) , Sotalol Hydrochloride Tablet Usp / Bp 40 Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40 Mg ) , Esmolol Hydrochloride Injection 10Mg / Ml 10 Ml Size , Sodium Nitroprusside Injection 25 Mg / Ml 2Ml Size , Carvedilol Tablet 3.125 Mg , Rosuvastatin Tablet Ip 20 Mg ( Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg ) , Rosuvastatin Tablet10 Mg , Sacubitril 24 Mg And Valsartan 26 Mg Tablet , 11. Dental Drugs , Chlorhexidine Mouthwash Ip / Bp 0.2 O / O , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel , 12. Dermatological Drugs , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O , Acyclovir Cream 5% , Cetrimide Cream Ip 15 Gm , Fusidic Acid Cream Ip 2% , Glycerin Ip 400 Gm , Liquid Paraffin Ip 400 Ml , Miconazole Nitrate Cream Ip 2% , Povidone Iodine Ointment 5% 15 Gm , Neomycin Bacitracin And Sulphacetamide Power ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Gentian Violet Topical Solution Usp 1O / O , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) , Betamethasone Dipropionate Cream Ip 0.05% , Betamethasone Lotion Ip 0.05 O / O , Clindamycin Phosphate Gel Usp 1 O / O , Clobetasol Propionate Cream 0.05 O / O , Glycerin Ip 100 Ml , Ketoconazole Cream 2% , Permethrin Lotion 5% , Permethrin Cream 5% , Tretenoin Cream Usp 0.025% , Coal Tar 6% & Salicylic Acid 3% Ointment , Calamine Lotion Ip 100Ml , Powder Clotrimazole 1% W / W 30 Gm , Terbinafine Cream 1% W / W ( 10Gm Tube ) , Olopatadine Hydrochloride Ophthalmic Solution 0.1 , Oitment Mupirocin Ip 2% , 13. Reagents And Diagnostic Agents , Multi Stix Test Strip , Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) , Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) , Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) , Gadodiamide Inj. 0.5Mml / Ml Vial , Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. , 14. Disinfectants And Antiseptics , Povidone Iodine Solution Ip 5 % 500 Ml , Compound Benzoin Tincture Ip , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) , Gluteraldehyde Solution 2% , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) , Surgical Spirit Ip / Bp ( 500 Ml ) , Chlorhexidine Gluconate Solution 5% 250 Ml , Surgical Spirit Ip / Bp ( 100 Ml ) , Povidone Iodine Solution Ip 5% 100Ml Bottle , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Solution Ip 10 % , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , 15. Diuretics , Acetazolamide Tab Ip 250Mg , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) , Hydrochlorthiazide Tab Ip 12.5 Mg , Mannitol Inj Ip 20% W / V , Spironolactone Tab Ip 25Mg , Torsemide Tab 10 Mg , Hydrochlorthiazide Tab Ip 25Mg , Torsemide Inj 10 Mg / Ml , Spironolactone Tablets Ip 50 Mg , 16. Drugs For Ear Ailments , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O , 17. Gastro Intestinal Drugs , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Bisacodyl Tab Ip 5 Mg , Dicyclomine Tab Ip 10 Mg , Dicyclomine Inj Ip 10 Mg / Ml , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml , Domperidone Suspension Ip 5Mg / 5Ml , Domperidone Tab Ip 10 Mg , Hyoscine Butylbromide Inj Ip 20 Mg / Ml , Loperamide Tab Ip 2 Mg , Metoclopramide Inj Ip 10Mg / 2Ml , Metoclopramide Tab Ip 10 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg / Ml , Ors Powder Ip , Pentoprazole Inj 40 Mg , Ranitidine Hcl Injection Ip 50Mg / 2Ml , Ranitidine Tab Ip 150Mg Film Coated , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O , Hyoscine Butyl Bromide Tablets Ip 10Mg , Drotaverine Tab Ip 40 Mg , Ranitidine Tab Ip 300Mg Film Coated , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml , Liquid Paraffin Ip 100 Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Ursodeoxycholic Acid Tablets 300 Mg , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) , 18. Gout And Rheumatiod Arthritis , Allopurinol Tablets Ip 100 Mg , Hydroxychloroquine Sulphate Tablets 200Mg , Leflunomide Tablets Ip / Usp 10Mg ( Film Coated ) , Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) , Sulfasalazine Delayed Release Tablets Usp / Gastroresistant Sulfasalazine Tablets Bp 500 Mg , 19. Hormones Other Endocrine Drugs And Contraceptives , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) , Carbimazole Tabs Ip 5 Mg ( Film Coated ) , Carboprost Tromethamine Injection Each Ml Contains Carboprost 0.25 Mg / Ml , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Conjugated Estrogen Tabs Usp 0.625 Mg. , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe , Ethinyloestradiol Tabs Ip 50 Mcg , Glibenclamide Tab Ip 5 Mg , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 2 Mg , Glimepiride Tab Ip 1Mg , Glipizide Tab Ip 5Mg , Hydroxyprogesterone Inj Ip 250Mg / Ml , Isophane Insulin Inj Ip 40 Iu / Ml , Metformin Tab Ip 500 Mg ( Film Coated ) , Norethisterone Tab Ip 5 Mg , Pioglitazone Tab Ip 15 Mg , Progesterone Inj 200 Mg / 2Ml , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) , Thyroxine Sodium Tablets Ip 100Mcg , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 , Glucagon For Injection Usp 1 Mg / Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Thyroxine Tablets Ip 50 Mcg , Octreotide Injection 50 Mcg / Ml , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges , Tenaligliptin Tablet 20Mg , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle , 20. Immunologicals , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) , Human Anti D Immunoglobulin 150 Mcg , Human Rabies Immunoglobulin Inj 150 Iu / Ml , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) , Tetanus Immunoglobulin 250 Iu / Vial , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) , Diphtheria Antitoxin 10000 Iu , Hepatitis B Immunologlobin Injection Ip 200 I.U , Human Immunoglbulin Ing With 12% Lgm, 12%Lga , 76%Lgg In Pack Of 10 Ml ( 0.5Mg ) , 21. Muscle Relaxants And Cholinestrase Inhibitors , Atracurium Inj 10 Mg / Ml , Glycopyrrolate Inj Usp 0.2 Mg / Ml , Midazolam Inj Ip 1 Mg / Ml , Neostigmine Inj Ip 0.5 Mg / Ml , Neostigmine Tab Ip 15 Mg , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) , Valethamate Bromide Inj 8Mg / Ml , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) , Neostigmine Injection Ip 2.5Mg / 5Ml , Cis Atracurium Besylate Injection 2 Mg / Ml In 5 Ml Vial , 22. Opthamological Preparations , Tropicamide Eye Drop Ip 1O / O , Atropine Eye Ointment Ip 1% , Atropine Sulphate Ophthalmic Solution Usp 1% , Chloramphenicol Eye Drops Ip 0.5 0 / 0 , Ciprofloxacin Eye Drops 0.3 O / O W / V , Ciprofloxacin Ophthalmic Ointment Usp 0.3% , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O , Tobramycin Eye Drops 0.3% [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Lidocaine Hcl Topical Solution Usp 4% , Fluconazole Eye Drops 0.3% , Timolol Eye Drops Ip 0.5 O / O W / V , Homatropine Eye Drops Ip 2% , Travoprost Eye Drops Ip 0.004 O / O , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Betaxolol Eye Drops 0.5 O / O , Carboxymethylcellulose Eye Drops 0.5% , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size , 23. Oxytocics And Antioxytocics , Isoxsuprine Inj Ip 5 Mg / Ml , Isoxsuprine Tab Ip 20 Mg , Methylergometrine Inj Ip 0.2 Mg / Ml , Methylergometrine Tab Ip 0.125 Mg , Misoprostol Tab Ip 200 Mcg , Oxytocin Inj Ip 5 Iu / Ml , Mifepristone Tab Ip 200Mg , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) , Human Chorionic Gonadotropin Injection Ip 5000 I.U. , Leurprolide Acetate Depot 3.75 Mg , Leurprolide Acetate Depot 11.25 Mg , 24. Psychotropic Drugs , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amitriptyline Tab Ip 25Mg Film Coated , Chlordiazepoxide Tablets Ip 10Mg , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) , Chlorpromazine Inj. Ip 25Mg / Ml , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) , Diazepam Tab Ip 5 Mg , Escitalopram Tab Ip 10 Mg , Fluoxetine Cap Ip 20 Mg , Haloperidol Inj Ip 5 Mg / Ml , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Imipramine Tab Ip 25 Mg ( Coated Tab ) , Imipramine Tab Ip 75 Mg ( Coated ) , Lithium Carbonate Tab Ip 300 Mg , Lorazepam Inj 2 Mg / Ml , Olanzapine Tab Ip 5 Mg , Risperidone Tab 2Mg , Risperidone Tab 1 Mg , Sertraline Tab 50 Mg , Trifluperazine Tab Ip 5 Mg Coated , Quetiapine Tablet Ip 50Mg , Quetiapine Tablet Ip 25Mg , Clonazepam Tablet 0.5 Mg , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Zolpidem Tablet 5 Mg , 25. Drugs Acting On The Respiratory Tract , Aminophylline Inj Ip 25 Mg / Ml , Beclomethasone Inhalation Ip 200 Mcg / Dose , Budesonide Nebulizer Suspension 0.25Mg / Ml , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S. , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml , Salbutamol Tablet Ip 4 Mg , Salbutamol Inhalation 100 Mcg / Dose , Salbutamol Nebuliser Solution Bp 5 Mg / Ml , Salbutamol Tab Ip 2 Mg , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) , Salbutamol Syrup Ip 2Mg / 5Ml , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Budesonide Powder For Inhalation 200 Mcg , Ipratropium Powder For Inhalation Ip 40 Mcg , Terbutaline Tablets Ip 2.5 Mg , Xylometazoline Nasal Drops Ip 0.1% , Cough Syrup / Expectorant ( 50 ) Ml , Acebrophylline Tablet 100 Mg , 26. Solution Correcting Water Electrolyte And Acid Base Disturbance , Compound Sodium Lactate Inj. Ip , Dextrose Inj Ip 25% W / V , Dextrose Inj Ip 10% , Dextrose Inj Ip 5% , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Potassium Chloride Inj. 0.15 Gm / Ml , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W / V Polypack 500 Ml , 27. Drugs For Urology , Finasteride Tablets Ip 5 Mg , Tamsulosin Hcl Tablets / Capsule 0.4 Mg , Flavoxate Tablets Ip / Bp 200 Mg ( Coated Tablet ) , Savelamer Carbonate Tablet 400 Mg ( Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg ) , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) , Levamisol Hydrochloride Tablet Ip 50 Mg ( Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg ) , Phenazopyridine Tablet 5 Mg , Dutasteride Tablet 0.5 Mg , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) , 28. Antivertigo , Betahistine Tab Ip 8 Mg , Betahistine Tab Ip 16 Mg , Cinnarizine Tablets Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , 29. Vitamins And Minerals , Ascorbic Acid Tab Ip 500 Mg , Calcium Gluconate Inj Ip 10% ( Iv Use ) , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Folic Acid Tab Ip 5 Mg , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) , Cholecalciferol Granules 60, 000 Iu / Gm , Mecobalamin Inj 500 Mcg / Ml , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Thiamine Tablets Ip 100 Mg , Calcitriol Capsules Ip 0.25 Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Cobalmine Tablet 1500Mcg , Vitamin D3 Oral Solution 60000 Iu , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size , Multi Vitamin Syrup , 30. Miscellaneous Drugs , Flunarizine Tab 5 Mg , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Peritonial Dialysis Solution Ip , Sodium Bicarbonate Inj Ip 7.5% W / V , Water For Inj Ip , Alendronate Sodium Tablets Usp / Bp 35 Mg , Mannitol With Glycerin Injection 10 O / O + 10 O / O W / V ( For Intravenous Infusion ) , Normal Human Intravenous Immunoglobulin 5G / 100Ml , Pregabalin Cap Ip 75 Mg , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Intravenous Fat Emulsion 20% W / V 250Ml , Pyridostigmine Tablet Usp 60 Mg ( Each Tablet Contains Pyridostigmine Usp 60 Mg ) , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size , Amino Acid 10% Injection 100Ml Size , Vitamin E Capsule 400 Mg , Inj Practant Alpha 80 Mg / Ml In Pack Of I05 Ml ( Detail In Rc ) , 31. Absorbable Sutures , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 , Absorbable Surgical Suture ( Sterile Catgut ) , Needled Suture Chromic Size-3 / 0 ( 3 / 8 Cir Rcutting Needle 26Mm, Length 76 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 , 32. Non Absorbable Surgical Suture Sterilised Surgical Needled Suture , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 4 / 0 ( 3 / 8 Conventional Cutting Needle 19Mm Length 60 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 5 / 0 ( 3 / 8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb 13 Mm Needle, Length 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8Cir Rb Taper Point Double Needle 9.3Mmlength 60 Cm ) / ( 3 / 8Cir Rb 16 Mm Needle, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 7 / 0 ( 3 / 8Cir Rb Double 8Mm Needle, Length 60 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb Double Needle 17Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Tapercut Double Needle 17Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Tapercut Needle 17Mm Length 75 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Tapercut Needle, 25 Mm Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Rb Needle 16 Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 8 / 0 ( 3 / 8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Circle Tapercut 13Mm Double Needle 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Circle Cc 13Mm Needle, Suture Length Of 70Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Suture Length Of 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 4 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 75 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2 / 0 1 / 2 Circle Taper Cut, 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2-0 1 / 2 Circle Taper Cut, 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green / White Or Blue / White Coated Polyster Braided ( Green / Blue ) With Size 3 / 0 1 / 2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 10 / 0 ( 3 / 8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 , B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 , 34. Polyglecraprone 25 Monofilament Sutures , Absorbable Surgical Sutures, Sterilised Needled Polyglecaprone / Polyglyconate, Monofilament Sutures Size 2 / 0 ( 1 / 2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate, Size 3 / 0 ( 1 / 2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 4 / 0 ( 1 / 2 Circle Cutting 16Mm Needle, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) , 35. Monofilament Polydioxanone Suture , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 ( 1 / 2 Circle Reverse Cutting 50 Mm Length 90Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2 / 0 ( 1 / 2 Circle Rb 31Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) , 36. Antibacterial Coated Suture , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm , 37. Surgicals , Absorbable Gelatin Sponge 80 X 50X 10Mm , Absorbent Cotton Wool Ip 500 Gm ( Net Weight ) , Ortho Cotton Roll 5 Inch 200 Gm Ortho C ( Net Weight ) , Ortho Cotton Roll 10 Inch 500 Gm Ortho C ( Net Weight ) , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set Blood Transfusion Set , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) , Suction Catheter, Sterile.Size: Fg 5 , Suction Catheter, Sterile. Size: F G-6 , Suction Catheter, Sterile. Size: F G-8 , Suction Catheter, Sterile. Size: F G-10 , Suction Catheter, Sterile. Size: F G-12 , Suction Catheter, Sterile. Size: F G-14 , Suction Catheter, Sterile. Size: F G-16 , Suction Catheter, Sterile. Size: F G-18 , Suction Catheter, Sterile. Size: F G-20 , Suction Catheter, Sterile. Size: F G-22 , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Infant Feeding Tube Size 10Fg , Infant Feeding Tube Size 8Fg , Infant Feeding Tube Size 5Fg , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G , Mucus Extractor Sterile , Nasal Oxygen Set, Twin Bore All Sizes Adult , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll , Plaster Of Paris Bandage 10Cm X 2.7Mts , Ryles Tube / Nasogastric Tube Size: 10 , Ryles Tube / Nasogastric Tube Size: 12 , Ryles Tube / Nasogastric Tube Size:14 , Ryles Tube / Nasogastric Tube Size: 16 , Ryles Tube / Nasogastric Tube Size: 18 , Scalp Vein Set ( Disposable ) Size 18G , Scalp Vein Set ( Disposable ) Size 20G , Scalp Vein Set ( Disposable ) Size 22G , Scalp Vein Set ( Disposable ) Size 24 G , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable , Surgical Blade Sterile, Size 11 , Surgical Blade Sterile, Size 15 , Surgical Blade Sterile, Size 22 , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 , Suture Needles Curved And Cutting Size 1-5 , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch , Urine Collecting Bag, Disposable 2000 Ml , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Plain - Size 2.5 , Endotracheal Tube, Plain - Size 3 , Endotracheal Tube, Plain - Size 3.5 , Endotracheal Tube, Plain - Size 4 , Endotracheal Tube, Plain - Size 4.5 , Endotracheal Tube, Plain - Size 5 , Endotracheal Tube, Plain - Size 5.5 , Endotracheal Tube, Plain - Size 6 , Endotracheal Tube, Plain -Size 6.5 , Endotracheal Tube, Plain - Size 7 , Endotracheal Tube, Plain - Size 7.5 , Endotracheal Tube, Plain - Size 8 , Endotracheal Tube, Plain - Size 8.5 , Endotracheal Tube, Cuffed - Size 4 , Endotracheal Tube, Cuff - Size 4.5 , Endotracheal Tube, Cuff - Size 5 , Endotracheal Tube, Cuff - Size 6 , Endotracheal Tube, Cuff- Size 6.5 , Endotracheal Tube, Cuff - Size 7 , Endotracheal Tube, Cuff - Size 7.5 , Endotracheal Tube, Cuff - Size 8 , Endotracheal Tube, Cuff - Size 8.5 , Endotracheal Tube, Cuff - Size 9 , Tracheostomy Tube, Plain - All Sizes , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 , Corrugated Drainage Sheet - All Sizes , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm , Bone Wax Sterilised , Temporary Cardiac Pacing Wire ( Electrode ) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Skin Graft Knife Blade ( Sterile ) & Handle , K Wire, Length 375 Mm; 1Mm , K Wire, Length 375 Mm; 1.6Mm , K Wire, Length 375 Mm; 1.8Mm , Face Mask, Disposable , Surgical Cap Disposable ( For Surgeons ) , Surgical Cap, Disposable ( For Nurses ) , Foldable Intra Ocular Lense With Injector 11 To 17.5 , Foldable Intra Ocular Lense With Injector18 To 24 , Foldable Intra Ocular Lense With Injector 24.5 To 28.5 , Standard Pama Intra Ocular Lenses 11 To 17.5 ( Pc-Iol ) , Standard Pama Intra Ocular Lenses ) 18 To 24 ( Pc-Iol ) , Standard Pama Intra Ocular Lenses24.5 To 28.5 ( Pc-Iol ) , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free , Rubber Examination Gloves, Non-Sterile, Extra Small , Rubber Examination Gloves, Size Small , Rubber Examination Gloves, Size Medium , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large , Pressure Monitoring Line / High Pressure Extension Line , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml , Umbilical Catheter For New Born, All Sizes - , Umbilical Cord Clamp , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- , Bone Cement , Sanitary Napkin Beltless , Sanitary Pads Belt Type , Sanitary Napkin Beltless With Wings , Oxygen Mask ( Adult ) , Oxygen Mask ( Pediatric ) , Foleys Catheter No. 14 , Nelaton Catheter Size 14 Fg , Ecg Electorde ( Details In Rc ) , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is3319 ( Details In Rc ) , Sterile Hyoidemic Syringe With Needle Attached 22 G Single Use 50 Ml ( Details In Rc ) , Urethralcatheter 90 ( Fg-14 ) Made Of Medical Grade Pvc ( Details In Rc ) , Urethralcatheter 91 ( Fg-10 ) Made Of Medical Grade Pvc ( Details In Rc ) , Vaccum Suction Set, 2.5Meter Length ( Details In Rc ) , Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 10Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 50Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 100Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 150Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) ( Detail In Rc ) , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) , Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support ( Detail In Rc ) , Nebulization Mask Adult ( Detail In Rc ) , Nebulization Mask Paediatric ( Detail In Rc ) , Chemotherapy Port And Non-Coring Needles ( Adult ) ( Detail In Rc ) , Chemotherapy Port & Non-Coring Needles ( Pediatric ) ( Detail In Rc ) , 38. Swine Flu Drugs , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , 40 Anti-Malerial Drugs , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg , Group Name ( 1 ) :: 42 Covid19 , Liposomol Amphotericine Injection B 50Mg , Group Name ( 2 ) :: Eye , Creseent 2.5Mm , Lens Tip 15 Dgree Angal , Kerotone 2.8Mm , Needle No.26 , Needle No.24 , Pilo Carpine Nittrate 0.5% Injection , Drop Proparacaine Hcl Opthalmic Solution 0.5% , Droptropicamide With Phenylephrine Opthalmic 5 Ml Solution , In R, L. 500Ml Glass Bottle ( Compund Sodium Lactate Injection 500Ml ) , Korsolex Rapid 500Ml ( Glutaraldehyde 15 Gm 1.6 Dihydroxy 2.5 Dioxahexane 19.7 Gm Rust Inhibitions ) , Trypen Blue Dye 2Ml , Gauzethan Unmedicated ( 120Cmx9mtr ) Weight 325 Grm , Ordinary Bandage ( 15Cmx4mtr ) Weight 412 Grm , Ordinary Bandage ( 10Cmx4mtr ) Weight 275 Grm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
3.
Health and Family Welfare #10248496 Price Bid
Generic Medicine Medicine For Hospitals , Medicines , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg , Bupivacaine Inj Ip 0.5% , Halothane Bp , Isoflurane Usp , Ketamine Inj Ip 50 Mg/Ml , Lignocaine Ointment 5 O/O , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose (Monohydrate) 75 Mg , Lignocaine Gel Ip 2% , Lignocaine Inj Ip 2 O/O , Propofol Inj Ip 10 Mg/Ml , Thiopentone Inj Ip 0.5 G , Sevoflurane , Atropine Sulphate Injection 0.6Mg/Ml , Liquid Medical Oxygen (Lmo) , Diclofenac Sodium Inj Ip 25 Mg/ Ml (Im/Iv Use) , Diclofenac Gastro Resistant Tablet Ip 50 Mg(Enteric Coated) , Fentanyl Citrate Injection Ip 2 Ml , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Tab Ip 200 Mg (Coated) , Ibuprofen Tab Ip 400 Mg (Coated) , Morphine Sulphate Inj Ip 10Mg/Ml , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip(Each Ml Contains Paracetamol 150Mg) , Paracetamol Syrup Ip 125 Mg/5Ml (Detail In Rc) , Paracetamol Tab Ip 500 Mg , Paracetamol Inj. 150 Mg/Ml , Pentazocine Inj Ip 30Mg/Ml (Im/Iv Use) , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg/Ml , Indomethacin Cap Ip 25 Mg , Diclofence Prolonged Release Tablet Ip 100 Mg , Ibuprofen Oral Suspension Bp /Usp 100 Mg/ 5 Ml , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% , Etoricoxib Tab Ip 120Mg , Mefenamic Acid Tablets Bp 500 Mg , Fentanyl Citrate Injection 50Mcg/Ml , Naproxen Tablet Ip 500Mg , Naproxen Tablet Ip 250Mg , Etoricoxib Tablet Ip 90 Mg , Aspirin Tablet Ip (Gastro-Resistant) 150 Mg , Butorphanol Tartrate Injection Usp 1Mg/Ml 1Ml Size , Diclofenac Sodium Aqueous Injection 75Mg/Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip 1% W/V 100Ml Size , Ketorolac Tromethamine Dispersible Tablet 10 Mg(Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg) , Baclofen Tablet Ip 10 Mg (Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tizanidine Hydrochloride Tablet Ip 2 Mg (Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg) , Adrenaline Injection Ip 1Mg/Ml Im/Iv Use , Betamethasone Tab Ip 0.5Mg , Chlorpheniramine Maleate Tab Ip 4Mg , Dexamethasone Inj Ip 8Mg/2Ml , Dexamethasone Tab Ip 0.5 Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial (Im/Iv Use) , Hydroxyzine Tab Ip 25 Mg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Pheniramine Inj Ip 22.75Mg /Ml , Prednisolone Tab Ip 5 Mg , Promethazine Syrup Ip 5 Mg/5Ml , Promethazine Inj Ip 25Mg/Ml , Promethazine Tab Ip 25 Mg , Betamethasone Sod Phos Inj Ip 4Mg/Ml , Prednisolone Tablet Ip 10 Mg , Prednisolone Tab Ip 20 Mg , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg , Cetirizine,Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg,Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetirizine Syrup Ip 5Mg/5 Ml , Levoceitrizine Tablet 5Mg , Montelucast(10Mg) + Levocetrizine Tablet (5Mg) , Dexamethasone Tablet Ip 4 Mg (Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg) , Naloxone Inj Ip 0.4Mg/ Ml , Pralidoxime Chloride Injection Ip 25 Mg/Ml / 500 Mg , Acetylcystine Solution Usp (Injection) 200 Mg/Ml , Carbamazepine Tab Ip 200 Mg , Carbamazepine Tab Ip 100 Mg , Phenobarbitone Tab Ip 30 Mg , Phenytoin Injection Bp 50Mg/Ml , Phenytoin Oral Suspension Ip 25Mg/Ml , Phenytoin Tab Ip 100 Mg (Film Coated) , Sodium Valproate Inj 100 Mg/ Ml , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Phenobarbitone Inj Ip 200Mg/Ml , Carbamazepine Oral Suspension Usp 100 Mg/5Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml , Sodium Valproate Tablet(Gastro Resistant) Ip 500Mg , Clobazam Tablet/Capsule 5 Mg , Clobazam Tablet/Capsule 10 Mg , Levetiracetam Tablet Ip 500 Mg , Levetiracetam Oral Solution/Suspension 100Mg/Ml , Levetiracetam Injection 500Mg/5Ml , Gabapentine Tablet/Capsule 100Mg , Gabapentine Tablet/Capsule 300Mg , Lamotrigine Tablet Ip 50 Mg (Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg) , Divalproex Extended Release Tablet Ip 250 Mg (Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg) , Oxcarbazepine Tablet Ip 150 Mg (Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg) , Lacosamide Tablet 100 Mg (Each Film Coated Tablet Contains Lacosamide 100 Mg) , Topiramate Tablet Ip 25 Mg (Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , Acyclovir Oral Suspension Ip 400Mg/5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Albendazole Oral Suspension Ip 400 Mg/10Ml , Albendazole Tablets Ip 400 Mg(Detail In Rc) , Amikacin Inj Ip 100 Mg , Amikacin Inj Ip 500 Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mg , Amphotericin B Inj Ip 50 Mg , Ampicillin Injection Ip 500 Mg , Azithromycin Tab 100 Mg Dispersible Tabs (3 Tab Strip 10X3x3) , Azithromycin Tablets Ip 250Mg , Azithromycin Tab Ip 500 Mg , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj (Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm)(Im/Iv Use) , Cefotaxime Injection Ip 1 G , Cefotaxime Inj Ip 250 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G /Vial , Ceftriaxone Inj Ip 250 Mg/Vial , Ceftriaxone Inj Ip 500Mg/Vial , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Chloroquine Phosphate Inj Ip 40 Mg/ Ml , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated , Chloroquine Phosphate Suspension Ip 50 Mg/5Ml , Ciprofloxacin Injection Ip 200Mg/100Ml , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Clotrimazole Cream Ip 2% W/W , Clotrimazole Vaginal Tab Ip 500Mg , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Diethylcarbamazine Tab Ip 100 Mg , Doxycycline Cap Ip 100 Mg , Fluconazole Tablets Ip 150Mg , Gentamycin Injection Ip 80Mg/2Ml (Im/ Iv Use) , Griseofulvin Tab Ip 125 Mg , Itraconazole Cap 100 Mg , Meropenem Inj Ip 500 Mg , Metronidazole Inj Ip 500 Mg/100Ml , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base/5Ml , Metronidazole Tablets Ip 200 Mg (Film Coated) , Metronidazole Tablets Ip 400 Mg (Film Coated) , Norfloxacin Tab Ip 400Mg Film Coated , Ofloxacin Tab Ip 200 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Quinine Dihydrochloride Inj Ip 300 Mg/Ml , Quinine Sulphate Tablets Ip 300 Mg (Film Coated) , Ampicillin Cap Ip 500Mg , Nitrofurantoin Tab Ip 100Mg , Cloxacillin Sodium Inj Ip 500Mg , Cephalexin Oral Suspension Ip (Cephalexin Dry Syrup Ip) 125Mg/ 5 Ml , Ofloxacin Oral Suspension Ip 50Mg/ 5Ml , Tinidazole Tab Ip 300 Mg (Film Coated) , Tinidazole Tab Ip 500 Mg (Film Coated) , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg , Amoxycillin Oral Suspension Ip (Dry Syrup) 125 Mg/5Ml , Cefpodoxime Dispersible Tab 50 Mg , Cephalexin Tablets 125 Mg (Dispersible Tablets) , Meropenem Inj. Ip 1Gm , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Amikacin Inj Ip 250 Mg , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg/5 Ml (30Ml Bottle) , Artesunate Injection 60 Mg (I.M. I.V.Use) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O/O W/V (1Ml Ampoule),Sodium Chloride Injection Ip 0.9O/O W/V (5Ml Ampoule) , Aztreonam Injection Usp 500 Mg , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg/Ml (Paediatric Drops) , Cefuroxime Axetil Tab Ip 250 Mg , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Levofloxacin Tablets Ip 250 Mg , Linezolid Tablets Ip 600 Mg , Linezolid Inj 200Mg/100Ml , Mefloquine Tablets Ip 250 Mg , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml(In Nacl Inj) , Vancomycin For Intravenous Infusion Ip 500 Mg , Vancomycin For Intravenous Infusion Ip 1 Gm , Artemether And Leumefantrine Tablet (80 Mg And 480 Mg) , Co-Trimoxazole Tablet Ip (Trimethoprim 160Mg+Sulphamethoxazole 800Mg) , Aztreonam Injection 1Gm , Framycetin Sulphate Cream 1 O/O 30Gm Pack , Framycetin Sulphate Cream 1 O/O 100 Gm Pack , Artemether And Leumefantrine Tablet (40 Mg And 240 Mg) , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Piperacillin Injection 2 Gm + Tazobactom 250Mg Ip , Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection , Cefadroxil Dispersible Tablet 250 Mg(Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg) , Cefadroxil Tablet 500 Mg , Ofloxacin Oral Suspension Ip (Each 5Ml Contains Ofloxacin Ip 100 Mg) 30 Ml Size , Levofloxacin Tablet Ip 500 Mg (Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg) , Faropenem Tablet Sodium 200 Mg (Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg) , Clindamycin Phosphate Injection Ip 300 Mg , Imipenem + Cilastatin Injection 500Mg/500Mg Ip Powder For Solution , Polymixin Sulphate B Injection Usp 5 Lac I.U. , Meropenem Injection Ip 250 Mg , Colistimethate Injection Ip 1M Iu Powder For Solution , Voriconazole Injection 200Mg/Vial , Terbinafine Hydrochloride Tablet 250 Mg , Valganciclovir Tablet 450 Mg , Entecavir Tablet Ip 0.5 Mg (Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg) , Ganciclovir Sodium Injection 500Mg (Lyophilized Powder For Reconstitution) , Azathioprine Tab Ip 50 Mg , Bleomycin Injection Ip 15Mg (Bleomycin Sulphate Injection 15 Units) , Chlorambucil Tab Ip 5 Mg , Cisplatin Inj Ip 50 Mg/ 50 Ml , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cytarabine Injection Bp 500Mg , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Doxorubicin Inj Ip 50 Mg/ 25 Ml , Etoposide Inj Ip 100 Mg , Fluorouracil Inj Ip 250 Mg/ 5Ml , L-Asparaginase Inj 10000 Iu , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg /Ml , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Methotrexate Inj Ip 50 Mg/2 Ml , Methotrexate Tab Ip 2.5 Mg , Paclitaxel Inj Ip 260 Mg , Paclitaxel Inj Ip 100 Mg , Tamoxifen Tab Ip 10 Mg , Vinblastine Inj Ip 10Mg/ 10Ml , Vincristine Inj Ip 1Mg(Vial)/Vincristin Injection Usp 1Mg/Ml (Amp) , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Carboplatin Injection Ip 150 Mg , Carboplatin Injection Ip 450 Mg , Cisplatin Inj Ip 10 Mg/10 Ml , Dacarbazine Injection 500 Mg Usp/ Bp , Filgrastim Injection Ip (Granulocyte Colony Stimulating Factor) (Sc/Iv Use) 300 Mcg , Gemcitabine For Injection 200 Mg , Gemcitabine For Injection Ip 1Gm , Ifosfamide Injection Ip/Bp/Usp 1Gm , Imatinib Tab Ip 400Mg , Methotrexate Tablets Ip 10 Mg , Mitomycine Injection Ip 10 Mg/Mitomycine For Injection Usp 10 Mg , Oxaliplatin Injection Usp 50 Mg , Cyclosporin Capsule Usp/Ip 50 Mg , Procarbazine Hydrochloride Capsule Usp 50 Mg (Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg) , Bendamustine Injection 100 Mg , Capecitabine Tablet Ip 500 Mg (Each Film Coated Tablet Contains Capecitabine Ip 500 Mg) , Letrozole Tablet Ip 2.5 Mg (Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg) , Temozolomide Capsule Ip 100 Mg (Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg) , Bortezomib Injection 2Mg , Abiraterone Acetate Tablet Ip 250 Mg (Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg) , Lomustine Capsule Ip 40 Mg (Each Capsule Contains Lomustine Ip 40 Mg) , Thalidomide Capsule Usp 100 Mg (Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg) , Bevacizumab Injection 400 Mg , Bevacizumab Injection 100 Mg , Cyclophosphamide Tablet Ip 50 Mg (Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg) , Gefitinib Tablet Ip 250 Mg (Each Film Coated Tablet Contains Gefitinib Ip 250 Mg) , Mycophenolate Mofetil Capsule/Tablets Ip 250 Mg (Each Capsule/Tablets Conatin Mycophenolate Mofetil Ip 250 Mg) , Tacrolimus Capsule Ip 0.5 Mg (Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg) , Mycophenolate Sodium Tablet 360 Mg (Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg) , Bicalutamide Tablet Ip 50 Mg (Each Film Tablet Contains Bicalutamide Ip 50 Mg) , 6 Thioguanine Tablet Usp 40 Mg (Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg) , Zoledronic Acid Injection Ip 4Mg Vial , Dasatinib Tab 100 Mg , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Trihexyphenidyl Hcl Tab Ip 2 Mg , Bromocriptine Tablets Ip 2.5 Mg , Acenocoumarol Tab Ip/ Nicoumalone Tab Ip 2 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Desferrioxamine Injection Ip 500 Mg / Vial (For I.M. Inj And I.V S.C. Infusion) , Dried Human Anti Haemophlic Fraction Ip (Dried Factor Viii Fraction Ip) 250 Iu/ Vial (Iv Use) , Enoxaparin Sodium Inj Ip 60 Mg , Ethamsylate Inj 250 Mg/ 2Ml (Im/Iv) , Heparin Sodium Inj Ip 5000 Iu/Ml (Im/Iv Use) , Human Albumin Solution Ip 20% , Rh-Erythropoetin Inj Ip 10000 Iu , Rh-Erythropoetin Inj Ip 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. (Aqueous Solution) , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Factor Ix Concentrate (Purified) Ip 600 I.U.(Human Coagulation Factor Ix) , Anti Inhibitor Coagulation Complex (Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial) , Hydroxyethyl Starch (130/0.4) 6 O/O W/V With Sodium Chloride 0.9 O/O W/V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion , Tranexamic Acid Tablets Ip 500 Mg , Warfarin Sodium. Tab Ip 5Mg , Vitamin K-1 (Phytomenadione) Ip 1Mg/0.5Ml Injection (Detail In Rc) , Dried Factor Viii Fraction Ip (Iv Use) 500 Iu/Vial , Dried Factor Viii Fraction Ip (Iv Use) 1000 Iu/Vial , Recombinant Coagulation Factor Viia 1Mg , Recombinant Coagulation Factor Viia 2Mg , N Butyl Alcohol Injection 0.26Mg/5Ml, Citric Acid 2.5Mg/5Ml And Sod. Chloride Solution 5 Ml Size , Ethamsylate Tablet 500 Mg (Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg) , Feracrylum 1% W/V Sterile Solution 100 Ml , Tranexamic Acid Injection Ip 100Mg/Ml 5Ml Size , Recombinant F Ix 500 Iu With Diluent , 3Rd Generation Recombinant F Viii 250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amiodarone Hydrochloride Inj 50 Mg/Ml , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Clopidogrel Tab Ip 75 Mg , Digoxin Inj Ip 0.25 Mg/Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dobutamine Inj Ip 50Mg/Ml/250Mg (Vial/)Dobutamine Inj Ip 250 Mg/5Ml(Amp) , Dopamine Hydrochloride Inj Ip 40 Mg/Ml , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tab Ip 2.5Mg , Isosorbide Dinitrate Tab Ip 5 Mg , Isosorbide Mononitrate Tabs Ip 20 Mg , Lisinopril Tab Ip 5 Mg , Losartan Tab Ip 50 Mg , Magnesium Sulphate Inj. Ip 500Mg/Ml (50%W/V) , Methyldopa Tab Ip 250Mg Film Coated , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg (Sustained Release) , Nitroglycerin Inj 5 Mg/ Ml , Propranolol Tab Ip 40 Mg , Streptokinase Injection 15 Lac Units Ip , Verapamil Tab Ip 40 Mg Film Coated , Labetalol Tab Ip 100Mg , Labetalol Hcl Inj Ip 20Mg/4Ml , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip (Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg) , Amlodipine And Enalapril Maleate Tablets (Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg) , Losartan Potassium And Amlodipine Tablets Ip (Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg) , Losartan Potassium And Hydrochlorothiazide Tablets Ip(Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril (Anhydrous) 5 Mg , Amlodipine And Atenolol Tablet (Amlodipine Besilate Equivalent To Amlodipine 5Mg,Atenolol 50Mg) , Atenolol Tab Ip 25 Mg , Enalapril Maleate Tablets Ip 10 Mg , Lisinopril Tablets Ip 10 Mg , Lisinopril Tab Ip 2.5 Mg , Losartan Tab Ip 25 Mg , Adenosine Injection Ip 6 Mg/2Ml , Atorvastatin Tablets Ip 40 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Fenofibrate Capsules/ Tab Ip 200 Mg , Isoprenaline Injection Ip 2Mg / Ml , Metoprolol Tablets Ip 25 Mg , Metoprolol Succinate Extended Release Tablets Ip 50 Mg , Noradrenaline Injection Ip 2 Mg/Ml , Prazosin Tablets (Extended Release) 2.5 Mg , Telmisartan Tablets Ip 40 Mg , Urokinase Injection 5 Lac Unit (Lyophilized) , Ramipril Tablets Ip 2.5 Mg , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Clonidine Hydrochloride Tablet Ip 0.1 Mg (Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg) , Sotalol Hydrochloride Tablet Usp/Bp 40Mg (Each Film Coated Tablet Contains Sotalol Hydrochloride Usp/Bp 40Mg) , Esmolol Hydrochloride Injection 10Mg/Ml 10Ml Size , Sodium Nitroprusside Injection 25Mg/Ml 2Ml Size , Carvedilol Tablet 3.125 Mg , Rosuvastatin Tablet Ip 20 Mg (Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg) , Rosuvastatin Tablet 10 Mg , Sacubitril 24 Mg And Valsartan 26 Mg Tablet , Chlorhexidine Mouthwash Ip 0.2 O/O , Dental Gel Choline Salicylate 8.7 O/O, Benzalkonium Chloride 0.01 O/O, Lignocaine Hcl 2 O/O (Flavoured Gel Base) , Tooth Gel Sodium Monofluorophosphate 0.7 O/O And Potassium Nitrate 5 O/O (In Flavoured Base) , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O/O + Salicylic Acid 3 O/O , Acyclovir Cream 5% , Cetrimide Cream Ip 15 Gm , Fusidic Acid Cream Ip 2% , Glycerin Ip 400 Gm , Liquid Paraffin Ip 400 Ml , Miconazole Nitrate Cream Ip 2% , Povidone Iodine Ointment 5% 15 Gm , Neomycin Bacitracin And Sulphacetamide Powder (Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg) , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Gentian Violet Topical Solution Usp 1O/O , Clotrimazole Mouth Paint (Clotrimazole 1 O/O W/V) , Beclomethasone, Neomycin And Clotrimazole Cream (Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 %) , Gamma Benzene Hexachloride Lotion 1%(Lindane Lotion Usp) , Betamethasone Dipropionate Cream Ip 0.05% , Betamethasone Lotion Ip 0.05 O/O , Clindamycin Phosphate Gel Usp 1 O/O , Clobetasol Propionate Cream Ip 0.05 O/O , Glycerin Ip 100 Ml , Ketoconazole Cream 2% , Permethrin Lotion 5% , Permethrin Cream 5% , Tretenoin Cream Usp 0.025% , Coal Tar 6% & Salicylic Acid 3% Ointment , Calamine Lotion Ip 100Ml , Powder Clotrimazole 1% W/W 30 Gm , Terbinafine Cream 1%W/W (10 Gm Tube) , Olopatadine Hydrochloride Ophthalmic Solution 0.1% W/V Ip (E/D) 5Ml Size , Oitment Mupirocin Ip 2% , Anti A Blood Grouping Serum Ip(Anti A Monoclonal Serum) , Anti B Blood Grouping Serum Ip(Anti B Mono Clonal Serum) , Anti D(Rh) Blood Grouping Serum Ip/Anti D Blood Grouping Serum Ip , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% (Iodine Conc.= 292 Mg/Ml) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W/V (Iodine = 370 Mg/Ml) , Gadodiamide Inj. 0.5Mml/Ml Vial , Vdrl Antigen (With + Ve And - Ve Control) / Rpr Slide Kit , Iohexol Usp (Solution For Injection) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine/Ml , Iohexol Usp(Solution For Injection) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine/Ml. , Multistix Test Strip , Povidone Iodine Solution Ip 5 % 500 Ml , Compound Benzoin Tincture Ip , Formaldehyde Solution (34.5 Per. - 38 Per.) , Gluteraldehyde Solution 2% , Hydrogen Peroxide Solution Ip 6 O/O (20 Vol) , Lysol (Cresol With Soap Solution) Ip (Cresol 50 O/O + Soap 50 O/O) , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O/O W/V Povidone Iodine (Suitable For Hand Wash) , Surgical Spirit Ip (500 Ml) , Chlorhexidine Gluconate Solution 5% 250 Ml , Surgical Spirit Ip (100 Ml) , Povidone Iodine Solution Ip 5% 100Ml Bottle , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Solution Ip 10 % , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , Acetazolamide Tab Ip 250Mg , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg/Ml (Im And Iv Use) , Hydrochlorthiazide Tab Ip 12.5 Mg , Mannitol Inj Ip 20% W/V , Spironolactone Tab Ip 25Mg , Torsemide Tab 10 Ip Mg , Hydrochlorthiazide Tab Ip 25Mg , Torsemide Inj 10 Mg/Ml , Spironolactone Tablets Ip 50 Mg , Ciprofloxacin 0.3 O/O And Dexamethasone 0.1 O/O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp , Clotrimazole 1 O/O With Beclomethasone Dipropionate 0.025 O/O Ear Drops , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Ceruminolytic Drops (Wax Dissolving Ear Drops) Paradichlorobenzene 2 O/O , Benzocaine 2.7 O/O , Chlorbutol 5 O/O, Turpentine Oil 15 O/O , Drotaverine Hydrochloride Inj 40 Mg/2 Ml , Ointment Containing Lidocaine Ip 3 O/O Zinc Oxide Ip 5 O/O , Hydrocortisone Ip 0.25 O/O, Allantoin Ip 0.5 O/O , Antacid Tablets.Formula,Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Antacid Liquid,Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Bisacodyl Tab Ip 5 Mg , Dicyclomine Tab Ip 10 Mg , Dicyclomine Inj Ip 10 Mg /Ml , Dicyclomine Hydrochloride Oral Solution Ip 10Mg /5Ml , Domperidone Suspension Ip 5Mg/5Ml , Domperidone Tab Ip 10 Mg , Hyoscine Butylbromide Inj Ip 20 Mg/ Ml , Loperamide Tab Ip 2 Mg , Metoclopramide Inj Ip 10Mg/2Ml , Metoclopramide Tab Ip 10 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg/Ml , Ors Powder Ip , Pentoprazole Inj 40 Mg , Ranitidine Hcl Injection Ip 50Mg/2Ml , Ranitidine Tab Ip 150Mg Film Coated , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O/O Disodium Hydrogen Phosphate Dodecahydrate 8 O/O , Hyoscine Butyl Bromide Tablets Ip 10Mg , Drotaverine Tab Ip 40 Mg , Ranitidine Tab Ip 300Mg Film Coated , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Metoclopramide Hydrochloride Syrup Ip 5 Mg/ 5Ml , Domperidone Oral Drops 10Mg/ Ml (10Ml) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp/Bp 10Gm/15Ml Or 3.35 Gm/5Ml , Liquid Paraffin Ip 100 Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Ursodeoxycholic Acid Tablets Ip 300 Mg , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet (Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Prochlorperazine Mesylate Injection 12.5Mg/Ml 5Ml Size , Probiotic Sachets 1 Gm Size (Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores) , Mesalamine Tablet Usp 1.2 Gm Enteric Coated (Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm) , Allopurinol Tablets Ip 100 Mg , Hydroxychloroquine Sulphate Tablets 200Mg , Leflunomide Tablets Ip 10Mg(Film Coated) , Leflunomide Tablets Ip/Usp 20Mg (Film Coated) , Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip , Biphasic Isophane Insulin Inj Ip (30 % Soluble Insulin And 70 % Isophane Insulin) Inj. 40 Iu/Ml(R-Dna Origin) , Carbimazole Tabs Ip 5 Mg (Film Coated) , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg/Ml , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Conjugated Estrogen Tabs Usp 0.625 Mg. , Dinoprostone Cream/ Gel 0.5 Mg Dinoprostone In Syringe , Ethinyloestradiol Tabs Ip 50 Mcg , Glibenclamide Tab Ip 5 Mg , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 2 Mg , Glimepiride Tab Ip 1Mg , Glipizide Tab Ip 5Mg , Hydroxyprogesterone Inj Ip 250Mg /Ml , Isophane Insulin Inj Ip 40 Iu /Ml , Metformin Tab Ip 500 Mg(Film Coated) , Norethisterone Tab Ip 5 Mg , Pioglitazone Tab Ip 15 Mg , Progesterone Inj 200 Mg/ 2Ml , Insulin Injection Ip (Soluble Insulin/Neutral Insulin Injection)40 Iu/Ml(R.Dna Origin) , Thyroxine Sodium Tablets Ip 100Mcg , Metformin Hydrochloride(Sustained Release Tablets Ip 1000 Mg , Glipizide And Metformin Hydrochloride Tablets Usp (Glipizide 5 Mg, Metformin Hydrochloride 500 Mg) , Glibenclamide And Metformin Hydrochloride (Sr) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg (Sustained Release) , Metformin Hcl (Sustained Release) And Glimepiride Tab Metformin Hcl (Sustained Release) 500Mg ,Glimepiride 1Mg , Metformin Hydrochloride (Sustained Release) And Glimepiride Tablets Ip (Metformin Hydrochloride(Sustained Release) 500 Mg, Glimipiride 2Mg) , Glimepiride, Pioglitazone And Metformin Hydrochloride (Sustained Release) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride (Sustained Release) 500 Mg , Gliclazide And Metformin Tablets (Gliclazide 80 Mg And Metformin Hcl 500 Mg) , Glucagon For Injection Usp 1 Mg/Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Thyroxine Tablets Ip 50 Mcg , Octreotide Injection 50 Mcg/Ml , Insulin Glargine 3Ml (100Iu/Ml) With 15 Insulin Syringes And Needles/Cartridge 3Ml (100Iu/Ml) With 15 Needles And 1 Pen Per 20 Cartridges , Tenaligliptin Tablet Ip 20Mg , Insulin Glargine 10 Ml Vial (100 Iu/Ml) With 30 Insuline Syringes With Needle , Human Anti D Immunoglobulin Injection 300Mcg (Im Use) , Human Anti D Immunoglobulin 150 Mcg , Human Rabies Immunoglobulin Inj 150 Iu/ Ml , Rabies Vaccine Human (Cell Culture) Ip (Intradermal) 2.5 Iu , Rabies Vaccine Human (Cell Culture) Ip (Intramuscular) 2.5 Iu/ Dose , Snake Venum Anti Serum Ip (Lyophilized)Polyvalent Anti Snake Venum,Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum,0.45 Mg Of Common Kraite(Bungaras)Venum(Details In Rc) , Tetanus Immunoglobulin Ip 250 Iu/ Vial , Tetanus Vaccine (Adsorbed) Ip 5 Ml Vial , Rabies Antiserum Ip (Equine) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments (I.M./Sc Use) , Diphtheria Antitoxin 10000 Iu , Hepatitis B Immunologlobin Injection Ip 200 I.U , Human Immunoglobulin Inj With 12%Igm,12%Iga,76%Igg In Pack Of 10Ml(0.5Gm) , Atracurium Inj 10 Mg/Ml , Glycopyrrolate Inj Ip 0.2 Mg/Ml , Midazolam Inj Ip 1 Mg/Ml , Neostigmine Inj Ip 0.5 Mg/Ml , Neostigmine Tab Ip 15 Mg , Succinylcholine Inj. Ip 50 Mg/Ml (Iv Use) , Valethamate Bromide Inj 8Mg / Ml , Vecuronium Bromide For Injection 4Mg (Freeze Dried) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets (Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg) , Neostigmine Injection Ip 2.5Mg/5Ml , Cis Atracurium Besylate Injection 2 Mg/Ml In 5 Ml Vial , Tropicamide Eye Drop Ip 1O/O , Atropine Eye Ointment Ip 1% , Atropine Sulphate Ophthalmic Solution Usp 1% , Chloramphenicol Eye Drops Ip 0.5 0/0 , Ciprofloxacin Eye Drops Ip 0.3 O/O W/V , Ciprofloxacin Ophthalmic Ointment Usp 0.3% , Hydroxypropylmethyl Cellulose Solution 20 Mg/ Ml , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O/O +0.1 O/O , Tobramycin Eye Drops 0.3% [331] , Tobramycin Ophthalmic Ointment Usp 0.3% , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O/O W/V , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Lidocaine Hcl Topical Solution Usp 4% , Fluconazole Eye Drops 0.3% , Timolol Eye Drops Ip 0.5 O/O W/V , Homatropine Eye Drops Ip 2% , Travoprost Eye Drops Ip 0.004 O/O , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Betaxolol Eye Drops 0.5 O/O , Carboxymethylcellulose Eye Drops Ip 0.5% , Phenylephrine Hydrochloride Opthalmic Solution Usp/Phenylephrine Eye Drops Bp 5% , Acyclovir Eye Ointment Ip 3% W/W 5Gm Size , Eye Drop Moxifloxacin 0.5% W/V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W/W Eye Ointment Ip, 3Gm Size , Isoxsuprine Inj Ip 5 Mg/Ml , Isoxsuprine Tab Ip 20 Mg , Methylergometrine Inj Ip 0.2 Mg/Ml , Methylergometrine Tab Ip 0.125 Mg , Misoprostol Tab Ip 200 Mcg , Oxytocin Inj Ip 5 Iu/Ml , Mifepristone Tab Ip 200Mg , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg (Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg)/Natural Micronised Progesteron Tablet 200 Mg (Each Tablet Contains Progesteron Ip 200 Mg) , Cabergoline Tablet Ip 0.5Mg (Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg) , Human Chorionic Gonadotropin Injection Ip 5000 I.U. , Leurprolide Acetate Depot 3.75 Mg , Leurprolide Acetate Depot 11.25 Mg , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amitriptyline Tab Ip 25Mg Film Coated , Chlordiazepoxide Tablets Ip 10Mg , Chlorpromazine Tablets Ip 100 Mg (Coated Tablet) , Chlorpromazine Tablets Ip 25 Mg (Sugar Coated) , Chlorpromazine Tablets Ip 50 Mg (Coated Tablets) , Chlorpromazine Inj. Ip 25Mg/Ml , Diazepam Inj Ip 10Mg/2Ml (1M/Iv Use) , Diazepam Tab Ip 5 Mg , Escitalopram Tab Ip 10 Mg , Fluoxetine Cap Ip 20 Mg , Haloperidol Inj Ip 5 Mg/Ml , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Imipramine Tab Ip 25 Mg (Coated Tab) , Imipramine Tab Ip 75 Mg (Coated) , Lithium Carbonate Tab Ip 300 Mg , Lorazepam Inj Ip 2 Mg/Ml , Olanzapine Tab Ip 5 Mg , Risperidone Tab 2Mg , Risperidone Tab 1 Mg , Sertraline Tab Ip 50 Mg , Trifluperazine Tab Ip 5 Mg Coated , Quetiapine Tablet Ip 50Mg , Quetiapine Tablet Ip 25Mg , Clonazepam Tablet 0.5 Mg , Levosulpiride Tablet 25 Mg (Each Uncoated Tablet Contains Levosulpiride 25 Mg) , Lorazepam Tablet Ip 2 Mg (Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Zolpidem Tablet 5 Mg , Aminophylline Inj Ip 25 Mg/Ml , Beclomethasone Inhalation Ip 200 Mcg/Dose , Budesonide Nebulizer Suspension 0.25Mg/Ml , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg,Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg,Menthol 0.5 Mg, Syrup Q.S. , Ipratropium Bromide Nebulizer Solution 250 Mcg/ Ml , Salbutamol Tablet Ip 4 Mg , Salbutamol Inhalation 100 Mcg /Dose , Salbutamol Nebuliser Solution Bp 5 Mg/Ml , Salbutamol Tab Ip 2 Mg , Theophylline And Etofylline Injection (Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg) , Theophylline And Etofylline Tablets (Theophylline Ip 23Mg + Etofylline 77 Mg) , Theophylline Tablet 400Mg Sustained Release/ Controlled Release (Theophylline Prolonged Released Tablet Ip) , Salbutamol Syrup Ip 2Mg/ 5Ml , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml , Saline Nasal Solution (Drops) (Sodium Chloride 0.65 O/O) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Budesonide Powder For Inhalation 200 Mcg , Ipratropium Powder For Inhalation Ip 40 Mcg , Terbutaline Tablets Ip 2.5 Mg , Xylometazoline Nasal Drops Ip 0.1% , Cough Syrup/Expectorant(50) Ml , Acebrophylline Tablet/Capsule 100 Mg , Compound Sodium Lactate Inj. Ip , Dextrose Inj Ip 25% W/V , Dextrose Inj Ip 10% , Dextrose Inj Ip 5% , Multiple Electrolytes And Dextrose Injection Type I Ip (Electrolyte P Injection ) , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Potassium Chloride Inj. 0.15 Gm/Ml , Potassium Chloride Oral Solution U.S.P 500Mg/ 5Ml , Sodium Chloride And Dextrose Injection Ip 0.9 O/O + 5 O/O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W/V Polypack 500 Ml , Finasteride Tablets Ip 5 Mg , Tamsulosin Hcl Tablets/Capsule 0.4 Mg , Flavoxate Tablets Ip 200 Mg (Coated Tablet) , Savelamer Carbonate Tablet 400 Mg (Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg) , Sodium Bicarbonate Tablet Usp 1 Gm (Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm) , Levamisol Hydrochloride Tablet Ip 50 Mg (Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg) , Phenazopyridine Tablet 5 Mg , Dutasteride Tablet 0.5 Mg , Alkylizer Syrup 1.4 Gm/5 Ml( 100 Ml )(Disodium Hydrogen Citrate) , Betahistine Tab Ip 8 Mg , Betahistine Tab Ip 16 Mg , Cinnarizine Tablets Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , Ascorbic Acid Tab Ip 500 Mg , Calcium Gluconate Inj Ip 10% (Iv Use) , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Ferrous Sulphate With Folic Acid Tab (Paediatric) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Folic Acid Tab Ip 5 Mg , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi (Prophylactic) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg (With Appropriate Overages) , Vitamin A Paediatric Oral Solution Ip(Vitamin A Concentrate Oil Ip)Each Ml Contains Vitamin A 100000 Iu , Calcium And Vitamin D3 Suspension (Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Iron Sucrose Injection Usp/Bp 20Mg/Ml (For Iv Use) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg , Calcium With Vitamin D Tablets Usp /Calcium And Colecalciferol Tablets Bp/Calcium And Vitamin D3 Tablets Ip(Elemental Calcium 500 Mg, Vitamin D3-250 Iu) (Non-Chewable) , Cholecalciferol Granules 60,000 Iu /Gm , Mecobalamin Inj 500 Mcg/Ml , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Thiamine Tablets Ip 100 Mg , Calcitriol Capsules Ip 0.25 Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Cobalmine Tablet 1500Mcg , Vitamin D3 Oral Solution 60000 Iu , Ferric Carboxymaltose Injection 50 Mg/Ml 10 Ml Size , Multi Vitamin Syrup , Flunarizine Tab 5 Mg , Black Disinfectant Fluid (Phenyl) As Per Schedule O Grade Iii , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Peritonial Dialysis Solution Ip , Sodium Bicarbonate Inj Ip 7.5% W/V , Water For Inj Ip , Alendronate Sodium Tablets Usp / Bp 35 Mg , Mannitol With Glycerin Injection 10 O/O + 10 O/O W/V (For Intravenous Infusion) , Normal Human Intravenous Immunoglobulin 5G/100Ml , Pregabalin Cap Ip 75 Mg , Surfactant For Intratrecheal Instillation (Natural Bovine Lung Surfactant) , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Intravenous Fat Emulsion 20% W/V 250Ml , Pyridostigmine Tablet Ip 60 Mg (Each Tablet Contains Pyridostigmine Ip 60 Mg ) , Caffeine Citrate Usp Injection 20Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml) 3Ml Size , Amino Acid 10% Injection 100Ml Size , Vitamin E Capsule 400 Mg , Inj Poractant Alpha 80 Mg/Ml In Pack Of 1.5 Ml (Detail In Rc) , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 30 Mm Length 76 Cm) Size-2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic Size-3/0 (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size - 3/0 1/2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)1/2 Cir Rb Needle Size-1/0 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 1 1/2 Cir Tapercut Needle (Heavy) 40Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1 1/2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-3/0(1/2 Cir Conventional 25Mm Length 90 Cm)Undyed , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-4/0 (1/2 Cir Rb Needle 20Mm Length 70 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1/0(1/2 Cir Rb Needle 40Mm Length 90 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 3/0 3/8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-4/0 3/8 Circle Cutting 16Mm Needle,Suture Length 70Cm , Chromic Catgut Suture(3/8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm) Size 5/0 (Details In Rc) , Chromic Catgut Suture(3/8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm) Size 6/0 (Details In Rc) , Chromic Catgut Suture(3/8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm) Size 4/0 (Details In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(1/2 Cir Rb Needle 20Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2/0(3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 8/0 (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 3/0 (3/8 Conventional Cutting Needle 16Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 4/0 (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) , Non Absorbable Surgical Suture,Sterilised Needled Polyamide Monofilament Black (Nylon)Size 5/0(3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 2/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 1/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle,Length 90 Cm)Size 6/0 , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 7/0 (3/8Cir Rb Double 8Mm Needle, Length 60 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(3/8Cir Rb 16 Mm Needle, Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1/0(1/2 Cir Rb Needle 30Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1(1/2 Cir Rb Heavy Needle 45Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb Double Needle 17Mm Length 90 Cm)(Detail In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Cir Tapercut Double Needle 17Mm Length 70 Cm)(Detail In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Cir Rb Needle 30Mm, Length 90 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0(1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 4/0(1/2 Cir Rb Needle 16 Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0(3/8 Cir Cutting Needle 25Mm Length 45 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 8/0 (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Circle Tapercut 13Mm Double Needle 70Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 5/0 (1/2 Circle Cc 13Mm Needle, Suture Length Of 70Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/ Blue Size 4/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2/0 (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/Blue Size 2/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm)(Detail In Rc) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2/0 1/2 Circle Taper Cut,17Mm Double Armed Needle,Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2-0 1/2 Circle Taper Cut,25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With Size 3/0 1/2 Circle Tapercut Double Needle 25Mm,Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 10/0 (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , B.B Silk Suture (3/8 Cir Rb Needle 20Mm, Length 76 Cm Size 4/0 (Details In Rc) , B.B Silk Suture (3/8 Cir Rb Needle 16Mm, Length 76 Cm Size 5/0 (Details In Rc) , Absorbable Surgical Sutures,Sterilised Needled Polyglecaprone/Polyglyconate,Monofilament Sutures Size 2/0 (1/2 Circle Oval Rb Needle 26Mm Needle,Suture Length Of 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate,Size 3/0 (1/2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 4/0 (1/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 3/0 (3/8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 (1/2 Circle Reverse Cutting 50 Mm Length 90Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2/0 (1/2 Circle Rb 31Mm Needle, Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1/0(1/2 Circle Rb 30Mm Needle,Length 70Cm) , Absorbable Surgical Suture(Synthetic)Antibacterial Coated Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial With Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1/0 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 2/0 1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 1 1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 1/0 1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 3/0 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic)Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 3/0 3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm , Absorbable Gelatin Sponge 80 X 50X 10Mm(Details In Rc) , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set Blood Transfusion Set (Details In Rc) , Gloves Size 6.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 6.5 Inches,Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 Inches,Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 .5Inches,Powder Free (Disposablesterile Surgical Rubber Gloves)(Details In Rc) , Suction Catheter, Sterile.Size: Fg 5 (Details In Rc) , Suction Catheter, Sterile. Size: F G-6 (Details In Rc) , Suction Catheter, Sterile. Size: F G-8 (Details In Rc) , Suction Catheter, Sterile. Size: F G-10 (Details In Rc) , Suction Catheter, Sterile. Size: F G-12 (Details In Rc) , Suction Catheter, Sterile. Size: F G-14 (Details In Rc) , Suction Catheter, Sterile. Size: F G-16 (Details In Rc) , Suction Catheter, Sterile. Size: F G-18 (Details In Rc) , Suction Catheter, Sterile. Size: F G-20 (Details In Rc) , Suction Catheter, Sterile. Size: F G-22 (Details In Rc) , Catheter,Size 8(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 10(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 16(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 18(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 20(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 22(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 24(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Infant Feeding Tube Size 10Fg(Details In Rc) , Infant Feeding Tube Size 8Fg(Details In Rc) , Infant Feeding Tube Size 5Fg(Details In Rc) , Perfusion Set With Airway And Needle,(Adult Use) Sterile Disposable(Details In Rc) , Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use)Sterile Disposable(Details In Rc) , Infusion Set With Microdrip,(I.V.)Sterile Disposable(Details In Rc) , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conforn To Is 12227 , Sterile Disposable (Single Use) Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G (Details In Rc) , Sterile Disposable (Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.) Size 18G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G (Details In Rc) , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port Size 24G (Details In Rc) , Mucus Extractor Sterile(Details In Rc) , Nasal Oxygen Set, Twin Bore All Sizes Adult (Details In Rc) , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics (Details In Rc) , Paper Adhesive Plaster 1 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Plaster Of Paris Bandage 15Cm X 2.7 Mts/Roll , Plaster Of Paris Bandage 10Cm X 2.7Mts , Ryles Tube / Nasogastric Tube Size: 10(Details In Rc) , Ryles Tube / Nasogastric Tube Size: 12(Details In Rc) , Ryles Tube / Nasogastric Tube Size:14 (Details In Rc) , Ryles Tube / Nasogastric Tube Size: 16 (Details In Rc) , Ryles Tube / Nasogastric Tube Size: 18 (Details In Rc) , Scalp Vein Set (Disposable) Size 18G (Details In Rc) , Scalp Vein Set (Disposable) Size 20G (Details In Rc) , Scalp Vein Set (Disposable) Size 22G (Details In Rc) , Scalp Vein Set (Disposable) Size 24 G (Details In Rc) , Syringe 2 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Syringe 5 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Syringe 10 Ml Hypodermic With Needle Attached 22G,Sterile,Single Use Disposable(Details In Rc) , Syringe 20 Ml Hypodermic With Needle Attached 22G,Sterile,Single Use Disposable(Details In Rc) , Surgical Blade Sterile, Size 11(Details In Rc) , Surgical Blade Sterile, Size 15(Details In Rc) , Surgical Blade Sterile, Size 22(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 11-15(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 1-5(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 16-20(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 6-10(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Cutting Size 6-10(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Size 11-15(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Size 16-20(Details In Rc) , Suture Needles Curved And Cutting Size 1-5(Details In Rc) , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1/2 Inch (Details In Rc) , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1/2 Inch (Details In Rc) , Urine Collecting Bag, Disposable 2000 Ml(Details In Rc) , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Plain - Size 2.5 (Details In Rc) , Endotracheal Tube, Plain - Size 3 (Details In Rc) , Endotracheal Tube, Plain - Size 3.5 (Details In Rc) , Endotracheal Tube, Plain - Size 4 (Details In Rc) , Endotracheal Tube, Plain - Size 4.5 (Details In Rc) , Endotracheal Tube, Plain - Size 5 (Details In Rc) , Endotracheal Tube, Plain - Size 5.5 (Details In Rc) , Endotracheal Tube, Plain - Size 6 (Details In Rc) , Endotracheal Tube, Plain -Size 6.5 (Details In Rc) , Endotracheal Tube, Plain - Size 7 (Details In Rc) , Endotracheal Tube, Plain - Size 7.5 (Details In Rc) , Endotracheal Tube, Plain - Size 8 (Details In Rc) , Endotracheal Tube, Plain - Size 8.5 (Details In Rc) , Endotracheal Tube, Cuffed - Size 4 (Details In Rc) , Endotracheal Tube, Cuff - Size 4.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 5 Details In Rc , Endotracheal Tube, Cuff - Size 6 (Details In Rc) , Endotracheal Tube, Cuff- Size 6.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 7 (Details In Rc) , Endotracheal Tube, Cuff - Size 7.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 8 (Details In Rc) , Endotracheal Tube, Cuff - Size 8.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 9 (Details In Rc) , Tracheostomy Tube, Plain - All Sizes(Details In Rc) , Tracheostomy Tube (Pvc), Cuffed - All Sizes(Details In Rc) , Abdominal Drain Kit (With Collection Bag 2000 Ml Size 24 (Details In Rc) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) Size 28 (Details In Rc) , Abdominal Drain Kit,Sterile,Having Drainage Cather And Collection Bag(2000) Ml Size 32 (Details In Rc) , Corrugated Drainage Sheet - All Sizes(Details In Rc) , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm(Details In Rc) , Bone Wax Sterilised , Temporary Cardiac Pacing Wire (Electrode) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Skin Graft Knife Blade (Sterile)(Details In Rc) , K Wire, Length 375 Mm; 1Mm(Details In Rc) , K Wire, Length 375 Mm; 1.6Mm(Details In Rc) , K Wire, Length 375 Mm; 1.8Mm(Details In Rc) , Face Mask, Disposable(Triple Layer) , Surgical Cap Disposable (For Surgeons)(Details In Rc) , Surgical Cap, Disposable (For Nurses) (Details In Rc)(Details In Rc) , Foldable Intra Ocular Lense With Injector (Details In Rc) 11 To 17.5 , Foldable Intra Ocular Lense With Injector (Details In Rc) 18 To 24 , Foldable Intra Ocular Lense With Injector (Details In Rc) 24.5 To 28.5 , Standard Pama Intra Ocular Lenses (Details In Rc) 11 To 17.5 , Standard Pama Intra Ocular Lenses (Details In Rc) 18 To 24 , Standard Pama Intra Ocular Lenses (Details In Rc) 24.5 To 28.5 , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powdered , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powder Free , Rubber Examination Gloves, Non-Sterile, Extra Small(Details In Rc) , Rubber Examination Gloves,Size Small (Details In Rc) , Rubber Examination Gloves,Size Medium (Details In Rc) , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large (Details In Rc) , Pressure Monitoring Line / High Pressure Extension Line (Details In Rc) , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml (Details In Rc) , Umbilical Catheter For New Born, All Sizes -(Details In Rc) , Umbilical Cord Clamp (Details In Rc) , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property(Details In Rc) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 16 (Details In Rc) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 18 (Details In Rc) , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- (Details In Rc) , Bone Cement , Sanitary Napkin Beltless(Details In Rc) , Sanitary Pads Belt Type(Details In Rc) , Sanitary Napkin Beltless With Wings (Details In Rc) , Oxygen Mask (Adult) , Oxygen Mask (Pediatric) , Foleys Catheter No. 14 (Detail In Rc) , Nelaton Catheter Size 14 Fg(Detail In Rc) , Ecg Electrode (Detail In Rc) , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 (Detail In Rc) , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml (Detail In Rc) , Urethral Catheter 90 (Fg-14) Made Up Of Medical Grade Pvc (Detail In Rc) , Urethral Catheter 91 (Fg-10), Made Up Of Medical Grade Pvc (Detail In Rc) , Vaccum Suction Set, 2.5 Meter Length (Detail In Rc) , Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile (Detail In Rc) , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm (Longline Iv) (Detail In Rc) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm (Longline Iv) (Detail In Rc) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm (Longline Iv) (Detail In Rc) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm (Longline Iv) (Detail In Rc) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm (Longline Iv) (Detail In Rc) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm (Longline Iv) (Detail In Rc) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm (Longline Iv) (Detail In Rc) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm (Longline Iv) (Detail In Rc) , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements (Detail In Rc) , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 10Cm (Non Pyrogenic & Single Use) (Detail In Rc) , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 50Cm (Non Pyrogenic & Single Use) (Detail In Rc) , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 100Cm (Non Pyrogenic & Single Use) (Detail In Rc) , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 150Cm (Non Pyrogenic & Single Use) (Detail In Rc) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) (Detail In Rc) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) (Detail In Rc) , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube (Detail In Rc) , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property (Detail In Rc) , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G (Detail In Rc) , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Large Size For Ventilator Without Vent (Detail In Rc) , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Medium Size For Ventilator Without Vent (Detail In Rc) , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Large Size For Bipap With Vent (Detail In Rc) , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Medium Size For Bipap With Vent (Detail In Rc) , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support (Detail In Rc) , Nebulization Mask Adult (Detail In Rc) , Nebulization Mask Paediatric (Detail In Rc) , Chemotherapy Port And Non-Coring Needles(Adult) (Detail In Rc) , Chemotherapy Port & Non-Coring Needles(Pediatric) (Detail In Rc) , Oseltamivir Capsule Ip 75 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg) , Oseltamivir Capsule Ip 45 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg) , Oseltamivir Capsule Ip 30 Mg (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg/Ml (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg/Ml (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Act Kit Containing 3 Tablets Of Artesunate(25Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(250Mg+12.5Mg) , Act Kit Containing 3 Tablets Of Artesunate(50 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(500Mg+25Mg) , Act Kit Containing 3 Tablets Of Artesunate(100 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(750Mg+37.5Mg) , Act Kit Containing 3 Tablets Of Artesunate(150 Mg Each) And 2 Tablet Of Sulphadoxine And Pyrimethamine(500Mg+25Mg) , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate(200 Mg Each) And 2 Tablet Of Sulphadoxine Pyrimethamine(750Mg+37.5Mg)Each Or 3 Tablets Of Sulphadoxine Pyrimethamine(500+25)Mg , Liposomol Amphotericine Injection B 50Mg , Hydrochlorothiazide (12.5Mg) + Olmesartan Medoxomil (20Mg) , Hydrochlorothiazide (12.5Mg) + Olmesartan Medoxomil (40Mg) , Nicumalone 1 Mg , Nicumalone 4 Mg , Chymotrysin , Citicoline , Clarithromycin 500Mg , Dapagliflozin 10Mg , Deflazacort 6 Mg , Esomeprazole 40 Mg , Febuxastat 40 Mg , Febuxastat 80 Mg , Glucosamine + Diacerein 50 Mg Tab , Ketorolac 10 Mg , Levothyroxine Sodium Tablet 25 Mcg , Methylpredinisolone 16 Mg , Methylpredinisolone 8 Mg , Moxifloxacin400 Mg , Nitrazepam 10 Mg , Paracetamol 650 Mg , Pentoprazole 40 + Levosulpiride 150 Mgcap , Propylthiouracial 100 Mg , Repaglinide And Voglibose (0.5+0.3) , Rifaximin 500Mg , Rosuvastatin 160Mg + Finofib 10Mg , Serratiopeptidase 10Mg , Silodocin 4 Mg Cap , Silodocin 8 Mg Cap , Sitagliptin 50Mg , Sulphasalazine 500 Mg , Thiocolchicosite 4 Mg , Vildagliptine 50Mg , Voglibose 0.2 Mg Tab , Voglibose 0.3 Mg Tab , Zinc 50Mg , Azithromycine 100 Mg , Azithromycine 200 Mg , Cefpodoxime 100 Mg , Cyproheptidine , Drotavarine , Mefenamice Acid 100Mg/5Ml , Montelucast+Levocetrizine , Phenobarbitone 20Mg/5Ml, 100 Ml , Levofloxacine , Ondansetron , Zink 20 Mg, 100 Ml , Abdominal Suction Set , Arterial Line , Av Blood Line , Av Fistula Needle 16G , Av Fistula Needle 17G , Baby Diaper Small Size For Infents , Bain Circuit Adult , Bain Circuit Ped. , Bains Circuit Paediatric/ Adult , Bipolar Prosthesis Set , Calcanum Plate All Size , Ccs Screw 4 Mm, 6Mm, 5Mm , Chest Drainage Catheter (I.C.D.) (Thoracic Catheter) Size : Fg: 16, 32, 36 , Chlorhexidine Inpregnade Paraffin Gauze 10X10 , Chlorhexidine Inpregnade Paraffin Gauze 30X10 , Chlorhexidine Inpregnade Paraffin Gauze Roll , Clavical Plate All Size , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, (All Size) , Creep Bandage 10 Inch , Creep Bandage 2 Inch , Creep Bandage 4 Inch , Creep Bandage 6 Inch , Diaper Adult(S/M/L) , Distal Femur Plate All Size , Distal Humerus (Posterial & Medial) Plate All Size , Distal Humerus Extra Artecuilar Plate All Size (Right & Left) , Distal Radius T/Oblique Plate All Size , Distal Tebia Medial Plate All Size , Dynamic Hip Screw Size 80 To 110With Plate Long Barrer & Short Barrer All Size , Endres Nail 2.5Mm,3 Mm,3.5Mm,4Mm,4.5Mm , Febulla Tubualar Plate All Size , Femur Nail No. 9/32, 9/34, 9/36, 9/38, 9/40, 9/42, 10/32, 10/34, 10/36, 10/38, 10/40, 10/42, 11/32, 11/34, 11/36, 11/38, 11/40, 11/42, 12/32, 12/34, 12/36, 12/38, 12/40, 12/42 , Fistula Needle 16 G , Fixator Set , Gudel Airway Size 3,4,5 , Hook Plate All Size , Humerus Nail All Size , I/L Femur Nail Set , I/L Tibile Nail With Bolt Set , Knee Cap , Lignocain 10 % Spray , Locking Plateall Size , Merocel Nasal Pack , Needle 1.5 22G , Pedicle Screw Titanium With Set All Size , Poteriomedial Proximal Tebia Plate All Size , Proximal Femur Nail Long & Short No. 9/32,9/34,9/36,9/38,9/40,9/42, 10/32,10/34,10/36,10/38,10/40,11/4211/32,11/34,11/36,11/38,11/40,11/4,29/25,10/25,11/25,12/25 , Proximal Hocky Plate Set , Proximal Humerus Plate All Size , Proximal Tebia T Plate All Size , Raft Plate (Right & Left) All Size , Recon Plate All Size , Spine Feusion Cage All Size , Square Nail 2 Mm, 2.5Mm,3 Mm,3.5Mm , Tibia Nail & Femur Nail No. 8/28, 8/30, 8/32, 8/34, 8/36, 8/38, 9/28, 9/30, 9/32, 9/34, 9/36, 9/38, 10/28, 10/30, 10/32, 10/34, 10/36, 10/38, 11/28, 11/30, 11/32, 11/34, 11/36, 11/38 , Cream Luliconazole 1% W/W , Lignocain Mouth Paint , Alpha Beta Arteether [Lp.26]-[M] , Multivitamine , Azithromycin 10 Ml Vial Equivalent To 500 Mg , Caffein 10 Mg , Citicoline 250/500 Mg , Colistine 10 Lakh Unit , Compound Sodium 500Ml, Glass Bottel , Dexmedetomidine 100Mcg/Ml , Doxcyline100 Mg , Etomidate 10Ml , Etomidate 20 Mg , Ferric Carbo Maltose 500Mg/ 10 Ml Vial , Fluconazole 200Mg , Gdw 5% Glass Bottle , Levofloxacine 100 Ml , L-Ornithine L-Aspartate 10 Ml , Mephentermine 30Ml/Ml , Methylprednisolon Injection 40Mg , Moxifloxacin 100Ml , Nandrolone Decanoate 50 Mg Inj , Nicorandil 48 Mg , Normal Saline 500 Ml Glass Bottle , Ondansetron 8 Mg , Pilocarpine 0.5 %V/V , Piracetam 200 Mg , Ravici 5 Ml , Reteplase 18 Mg , Tirofiban 0.5 Mg , Vitamin D (600000 Iu) , Chloramphenicol +Polymycine , Chloramphenicol +Polymycine + Dexamethason , Carboxymethylcellulose + Glycerin , Gatifloxacin And Prednisolone , Moxifloxacilline+ Dyliprednate , Moxifloxacilline+ Prednisone , Natamycin 5% , Sodium Chloride 5% , Tropicamide + Phenlyephrine , Dorzolamide , Moxifloxacin And Prednisolone Eye Drop , Olaptadine & Ketrolac , Polymyxin B 10000Iu/Gm + Neomycin 3400Iu/Gm , Anti Cold15 Ml , Calcium30 Ml , Diastasepepsin With Simethicone 15 Ml , Digestive Enzyme 15 Ml , Hydroxyzine 15 Ml , Ondensetrone 30 Ml , Prednisolone 10 Ml , Terbutalin , Vitamind3 400 Iu , Vitamind3 800 Iu , Alpha+Lipoic Acid + Leycopen +Multivitamin And Miltiminerals , Anti-Oxidants Capsule(Beta Carotene-10 Mg,Vit-E 25Mg,Vit-C 100 Mg,Copper 1.5 Mg,Managanese 1.5 Mg,Zinc 7.5 Mg,Selenium 150 Microgram) , Aprebitant 125/80 , Dulexitim 20Mg , Dulexitim 30Mg , Glucosamine + Chloride +Msm , Racecadotril 100Mg , Rebeprazole +Levosulpiride , Tab Nicotin Gum 2 Mg , Tab Nicotin Gum 4 Mg , Tab Bupropion 150 Mg. , N 95 Mask , Tab Chlorine (Water Purification)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Rajasthan View Result →
4.
Health and Family Welfare #9943386 Price Bid
Tender For Supply Of L Medicine,Surgical And Dental Items- Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg [2] , Bupivacaine Inj Ip 0.5% [4] , Halothane Bp [6] , Isoflurane Usp [7] , Ketamine Inj Ip 50 Mg/ Ml [8] , Lignocaine Ointment 5 O/O [9] , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg [ 10] , Lignocaine Gel Ip 2% [ 12] , Lignocaine Inj Ip 2 O/O [ 13] , Propofol Inj Ip 10 Mg/ Ml [14] , Thiopentone Inj Ip 0.5 G [15] , Sevoflurane [491] , Atropine Sulphate Injection 0.6Mg/Ml [654] , Liquid Medical Oxygen (Lmo) [799] , Diclofenac Sodium Inj Ip 25 Mg/ Ml (Im/Iv Use) [19] , Diclofenac Gastro Resistant Tablet Ip 50 Mg(Enteric Coated) [20] , Fentanyl Citrate Injection Ip 2 Ml [21] , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+ Paracetamol 325 Mg [22 ] , Ibuprofen Tab Ip 200 Mg (Coated) [23] , Ibuprofen Tab Ip 400 Mg (Coated) [24] , Morphine Sulphate Inj Ip 10Mg/Ml [25] , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip(Each Ml Contains Paracetamol 150Mg) [26] , Paracetamol Syrup Ip 125 Mg/5Ml (Detail In Rc) [27] , Paracetamol Tab Ip 500 Mg [28] , Paracetamol Inj. 150 Mg /Ml [29] , Pentazocine Inj Ip 30Mg /Ml (Im/Iv Use) [30] , Tramadol Cap Ip 50 Mg [32] , Tramadol Inj 50 Mg/Ml [33] , Indomethacin Cap Ip 25 Mg [436] , Diclofence Prolonged Release Tablet Ip 100 Mg [437] , Ibuprofen Oral Suspension Bp /Usp 100 Mg/ 5 Ml [477] , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg [ 483] , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg [ 492] , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% [ 493] , Etoricoxib Tab Ip 120Mg [495] , Mefenamic Acid Tablets Bp 500 Mg [496] , Fentanyl Citrate Injection 50Mcg/Ml [655 ] , Naproxen Tablet Ip 500Mg [656] , Naproxen Tablet Ip 250Mg [657] , Etoricoxib Tablet Ip 90 Mg [658] , Aspirin Tablet Ip ( Gastro-Resistant) 150 Mg [679] , Diclofenac Sodium Aqueous Injection 75Mg/ Ml 1Ml Size, Iv & Im Use [695] , Paracetamol Infusion Ip 1% W/V 100Ml Size [696 ] , Ketorolac Tromethamine Dispersible Tablet 10 Mg(Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg) [ 697] , Baclofen Tablet Ip 10 Mg (Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) [698] , Tizanidine Hydrochloride Tablet Ip 2 Mg (Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg) [699] , Adrenaline Injection Ip 1Mg/Ml Im/Iv Use [34] , Betamethasone Tab Ip 0.5Mg [35] , Chlorpheniramine Maleate Tab Ip 4Mg [37 ] , Dexamethasone Inj Ip 8Mg/2Ml [39] , Dexamethasone Tab Ip 0.5 Mg [40] , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial (Im/ Iv Use) [42] , Hydroxyzine Tab Ip 25 Mg [43] , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg [ 44] , Pheniramine Inj Ip 22.75Mg /Ml [45] , Prednisolone Tab Ip 5 Mg [47] , Promethazine Syrup Ip 5 Mg/5Ml [48] , Promethazine Inj Ip 25Mg/Ml [49] , Promethazine Tab Ip 25 Mg [50] , Betamethasone Sod Phos Inj Ip 4Mg/Ml [418 ] , Prednisolone Tablet Ip 10 Mg [469] , Prednisolone Tab Ip 20 Mg [470] , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg [ 497] , Cetirizine Syrup Ip 5Mg/ 5 Ml [499] , Levoceitrizine Tablet 5Mg [659] , Montelucast(10Mg) + Levocetrizine Tablet ( 5Mg) [660] , Dexamethasone Tablet Ip 4 Mg (Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg) [700] , Naloxone Inj Ip 0.4Mg/ Ml [51] , Pralidoxime Chloride Injection Ip 25 Mg/Ml / 500 Mg [52] , Acetylcystine Solution Usp (Injection) 200 Mg/ Ml [500] , Carbamazepine Tab Ip 200 Mg [53] , Carbamazepine Tab Ip 100 Mg [54] , Phenobarbitone Tab Ip 30 Mg [56] , Phenytoin Injection Bp 50Mg/Ml [57] , Phenytoin Oral Suspension Ip 25Mg/Ml [58] , Phenytoin Tab Ip 100 Mg (Film Coated) [59] , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg [61] , Phenobarbitone Inj Ip 200Mg/Ml [420] , Carbamazepine Oral Suspension Usp 100 Mg/5Ml [474] , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml [479] , Sodium Valproate Tablet(Gastro Resistant) Ip 500Mg [661] , Clobazam Tablet Ip/Capsule 5 Mg [662] , Clobazam Tablet/ Capsule 10 Mg [663] , Levetiracetam Tablet Ip 500 Mg [664] , Levetiracetam Oral Solution/Suspension 100Mg/Ml [665] , Levetiracetam Injection 500Mg/5Ml [666] , Gabapentine Tablet/ Capsule 100Mg [667] , Gabapentine Tablet/ Capsule 300Mg [668] , Lamotrigine Tablet Ip 50 Mg (Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg) [ 701] , Divalproex Extended Release Tablet Ip 250 Mg (Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg) [702] , Oxcarbazepine Tablet Ip 150 Mg (Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg) [703] , Topiramate Tablet Ip 25 Mg (Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) [ 705] , Acyclovir Oral Suspension Ip 400Mg/ 5Ml [62] , Acyclovir Tab Ip 200 Mg [63] , Acyclovir Tab Ip 800 Mg [64] , Albendazole Oral Suspension Ip 400 Mg/ 10Ml [65] , Albendazole Tablets Ip 400 Mg(Detail In Rc) [ 66A] , Amikacin Inj Ip 100 Mg [67] , Amikacin Inj Ip 500 Mg [68] , Amoxycillin And Cloxacillin Cap 250 + 250 Mg [69] , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg [70] , Amoxycillin Cap Ip 250Mg [71] , Amoxycillin Cap Ip 500Mg [72] , Amoxycillin Dispersible Tablets Ip 125 Mg [73] , Ampicillin Injection Ip 500 Mg [75] , Azithromycin Tab 100 Mg Dispersible Tabs (3 Tab Strip 10X3X3) [78A] , Azithromycin Tablets Ip 250Mg [79A] , Azithromycin Tab Ip 500 Mg [80A] , Benzathine Benzylpenicillin Inj Ip 12 Lac Units [81] , Benzathine Benzylpenicillin Inj Ip 6 Lac Units [82] , Cefixime Tab Ip 100 Mg /Cefixime Dispersible Tab Ip 100 Mg [84] , Cefixime Tab Ip 200 Mg [85] , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm) (Im/Iv Use) [86] , Cefotaxime Injection Ip 1 G [87] , Cefotaxime Inj Ip 250 Mg [88] , Ceftazidime Inj Ip 1G [ 89] , Ceftazidime Inj Ip 250 Mg [90] , Ceftazidime Inj Ip 500 Mg [91] , Ceftriaxone Inj Ip 1G / Vial [93] , Ceftriaxone Inj Ip 250 Mg/Vial [94] , Ceftriaxone Inj Ip 500Mg/Vial [95] , Cephalexin Cap Ip 250 Mg [96] , Cephalexin Cap Ip 500 Mg [97] , Chloroquine Phosphate Inj Ip 40 Mg/ Ml [98] , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated [99] , Chloroquine Phosphate Suspension Ip 50 Mg/ 5Ml [100A] , Ciprofloxacin Injection Ip 200Mg/100Ml [101] , Ciprofloxacin Tablets Ip 250 Mg Film Coated [ 102] , Ciprofloxacin Tablet Ip 500 Mg Film Coated [ 103] , Clotrimazole Cream Ip 2% W/W [104] , Clotrimazole Vaginal Tab Ip 500Mg [105] , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg [107] , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg [108] , Diethylcarbamazine Tab Ip 100 Mg [110] , Doxycycline Cap Ip 100 Mg [111] , Fluconazole Tablets Ip 150Mg [114A] , Gentamycin Injection Ip 80Mg/2Ml (Im/ Iv Use) [116] , Griseofulvin Tab Ip 125 Mg , Itraconazole Cap 100 Mg [118] , Meropenem Inj Ip 500 Mg [119] , Metronidazole Inj Ip 500 Mg/100Ml [120] , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base/5Ml [121] , Metronidazole Tablets Ip 200 Mg (Film Coated ) [122] , Metronidazole Tablets Ip 400 Mg (Film Coated) [123] , Norfloxacin Tab Ip 400Mg Film Coated [ 124] , Ofloxacin Tab Ip 200 Mg [125] , Primaquine Tab Ip 2.5 Mg [128] , Primaquine Tab Ip 7.5 Mg [129] , Quinine Dihydrochloride Inj Ip 300 Mg/Ml [131] , Quinine Sulphate Tablets Ip 300 Mg (Film Coated) [132] , Ampicillin Cap Ip 500Mg [412] , Nitrofurantoin Tab Ip 100Mg [413] , Cloxacillin Sodium Inj Ip 500Mg [417] , Cephalexin Oral Suspension Ip (Cephalexin Dry Syrup Ip) 125Mg/ 5 Ml [427] , Ofloxacin Oral Suspension Ip 50Mg/ 5Ml [428] , Tinidazole Tab Ip 300 Mg (Film Coated) [430] , Tinidazole Tab Ip 500 Mg (Film Coated) [431] , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg [468] , Amoxycillin Oral Suspension Ip (Dry Syrup) 125 Mg/5Ml [473] , Cefpodoxime Dispersible Tab 50 Mg [ 475] , Cephalexin Tablets 125 Mg (Dispersible Tablets) [476] , Meropenem Inj. Ip 1Gm [481] , Acyclovir Intravenous Infusion Ip 250Mg [502] , Acyclovir Intravenous Infusion Ip 500Mg [503] , Amikacin Inj Ip 250 Mg [504] , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg [505] , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm [506] , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200Mg +28.5 Mg/5 Ml ( 30Ml Bottle) [507] , Artesunate Injection 60 Mg (I.M. I.V.Use) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O/O W/V (1Ml Ampoule) ,Sodium Chloride Injection Ip 0.9O/O W/V ( 5Ml Ampoule) [508A] , Cefepime Injection Ip 500 Mg [510] , Cefixime Oral Suspension Ip 25Mg/Ml (Paediatric Drops) [511] , Cefuroxime Axetil Tab Ip 250 Mg [512] , Clindamycin Capsule Ip 150Mg [513] , Clindamycin Capsule Ip 300 Mg [514] , Levofloxacin Tablets Ip 250 Mg [515] , Linezolid Tablets Ip 600 Mg [516] , Linezolid Inj 200Mg/ 100Ml [517] , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg [520 ] , Ofloxacin Infusion Ip 200Mg / 100 Ml(In Nacl Inj) [521] , Vancomycin For Intravenous Infusion Ip 500Mg , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg) [651 ] , Co-Trimoxazole Tablet Ip (Trimethoprim 160Mg+ Sulphamethoxazole 800Mg) [669] , Framycetin Sulphate Cream 1 O/O 30Gm Pack [684] , Framycetin Sulphate Cream 1 O/O 100 Gm Pack [685] , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg) [686 ] , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg [ 706] , Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection [708] , Cefadroxil Dispersible Tablet 250 Mg(Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg) [709] , Cefadroxil Tablet 500 Mg [710] , Ofloxacin Oral Suspension Ip (Each 5Ml Contains Ofloxacin Ip 100 Mg) 30 Ml Size [ 711] , Levofloxacin Tablet Ip 500 Mg (Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg) [712] , Clindamycin Phosphate Injection Ip 300 Mg [714 ] , Terbinafine Hydrochloride Tablet 250 Mg [721] , Azathioprine Tab Ip 50 Mg [133] , Bleomycin Injection Ip 15Mg (Bleomycin Sulphate Injection 15 Units) [134] , Chlorambucil Tab Ip 5 Mg [136] , Cisplatin Inj Ip 50 Mg/ 50 Ml [137] , Cyclophosphamide Inj Ip 200 Mg [138] , Cyclophosphamide Inj Ip 500 Mg [139] , Cytarabine Injection Bp 500Mg [141] , Danazol Cap Ip 50 Mg [ 142] , Daunorubicin Inj Ip 20 Mg [143] , Doxorubicin Inj Ip 50 Mg/ 25 Ml [144] , Etoposide Inj Ip 100 Mg [146] , Fluorouracil Inj Ip 250 Mg/ 5Ml [148] , L-Asparaginase Inj 10000 Iu [149] , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg /Ml [150] , Melphalan Tab Ip 5 Mg [151] , Mercaptopurine Tab Ip 50 Mg [152] , Methotrexate Inj Ip 50 Mg/2 Ml [153] , Methotrexate Tab Ip 2.5 Mg [154] , Paclitaxel Inj Ip 260 Mg [155] , Paclitaxel Inj Ip 100 Mg [156] , Tamoxifen Tab Ip 10 Mg [157] , Vinblastine Inj Ip 10Mg/ 10Ml [158] , Vincristine Inj Ip 1Mg( Vial)/Vincristin Injection Usp 1Mg/Ml (Amp) [ 159] , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit [525] , Carboplatin Injection Ip 150 Mg [526] , Carboplatin Injection Ip 450 Mg [527] , Cisplatin Inj Ip 10 Mg/ 10 Ml [528] , Dacarbazine Injection 500 Mg Ip [529] , Filgrastim Injection Ip ( Granulocyte Colony Stimulating Factor) (Sc/ Iv Use) 300 Mcg [530] , Gemcitabine For Injection 200 Mg [531] , Gemcitabine For Injection Ip 1Gm [532] , Ifosfamide Injection Ip 1Gm [533] , Imatinib Tab Ip 400Mg [ 534] , Methotrexate Tablets Ip 10 Mg [536] , Oxaliplatin Injection Usp 50 Mg [538] , Cyclosporin Capsule Ip 50 Mg [677] , Capecitabine Tablet Ip 500 Mg (Each Film Coated Tablet Contains Capecitabine Ip 500 Mg) [727] , Letrozole Tablet Ip 2.5 Mg (Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg) [ 728] , Temozolomide Capsule Ip 100 Mg (Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg) [729] , Thalidomide Capsule Usp 100 Mg (Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg) [733] , Bicalutamide Tablet Ip 50 Mg (Each Film Tablet Contains Bicalutamide Ip 50 Mg) [741] , 6 Thioguanine Tablet Usp 40 Mg (Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg) [742] , Zoledronic Acid Injection Ip 4Mg Vial [ 743] , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg [160] , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg [161] , Trihexyphenidyl Hcl Tab Ip 2 Mg [162] , Acenocoumarol Tab Ip/ Nicoumalone Tab Ip 2 Mg [163] , Deferasirox Tab 100 Mg [165] , Deferasirox Tab 500 Mg [166] , Deferiprone Cap 250 Mg [167] , Deferiprone Cap 500 Mg [168] , Desferrioxamine Injection Ip 500 Mg / Vial (For I.M. Inj And I.V S.C. Infusion) , Dried Human Anti Haemophlic Fraction Ip (Dried Factor Viii Fraction Ip) 250 Iu/ Vial (Iv Use) [171] , Enoxaparin Sodium Inj Ip 60 Mg [172] , Ethamsylate Inj 250 Mg/ 2Ml (Im/Iv) [173] , Heparin Sodium Inj Ip 5000 Iu/Ml (Im/Iv Use) [174] , Human Albumin Solution Ip 20% [175] , Rh-Erythropoetin Inj Ip 10000 Iu [176] , Rh-Erythropoetin Inj Ip 2000Iu [177] , Rh-Erythropoetin Inj 4000 Iu [179] , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. (Aqueous Solution) [180] , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion [405] , Factor Ix Concentrate ( Purified) Ip 500-600 I.U. (Human Coagulation Factor Ix) [406] , Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial With 10 Ml Solvent) [407] , Hydroxyethyl Starch ( 130/0.4) 6 O/O W/V With Sodium Chloride 0.9 O/O W/V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion [416] , Tranexamic Acid Tablets Ip 500 Mg [545] , Warfarin Sodium. Tab Ip 5Mg [546] , Vitamin K-1 ( Phytomenadione) Ip 1Mg/0.5Ml Injection ( Detail In Rc) [644] , Dried Factor Viii Fraction Ip (Iv Use) 500 Iu/Vial [688] , Dried Factor Viii Fraction Ip (Iv Use) 1000 Iu/Vial [689] , Recombinant Coagulation Factor Viia 1Mg [690] , Recombinant Coagulation Factor Viia 2Mg [691] , Ethamsylate Tablet 500 Mg (Each Uncoated Coated Tablet Contains Ethamsylate Bp 500 Mg) , Feracrylum 1% W/V Sterile Solution 100 Ml [ 746] , Tranexamic Acid Injection Ip 100Mg/Ml 5Ml Size [747] , Recombinant F Ix 500 Iu With Diluent [748] , 3Rd Generation Recombinant F Viii 250 Iu With Diluent [749 ] , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent [ 750] , Amiodarone Tab Ip 100 Mg [181] , Amiodarone Tab Ip 200 Mg [182] , Amiodarone Hydrochloride Inj 50 Mg /Ml [183] , Amlodipine Tab Ip 2.5 Mg [184] , Amlodipine Tablets Ip 5 Mg [185] , Atenolol Tab Ip 50 Mg [ 186] , Atorvastatin Tab Ip 10Mg [187] , Clopidogrel Tab Ip 75 Mg [188] , Digoxin Inj Ip 0.25 Mg/ Ml [189] , Digoxin Tab Ip 0.25 Mg. [190] , Diltiazem Tabs Ip 30 Mg Film Coated [191] , Dobutamine Inj Ip 50Mg /Ml/250Mg (Vial/) Dobutamine Inj Ip 250 Mg/5Ml(Amp) [192] , Dopamine Hydrochloride Inj Ip 40 Mg/Ml [193] , Enalapril Maleate Tab Ip 5Mg [194] , Enalapril Maleate Tab Ip 2.5Mg [195] , Isosorbide Dinitrate Tab Ip 5 Mg [197] , Isosorbide Mononitrate Tabs Ip 20 Mg [198] , Lisinopril Tab Ip 5 Mg [ 199] , Losartan Tab Ip 50 Mg [ 200] , Magnesium Sulphate Inj. Ip 500Mg/Ml (50%W/V) [201] , Methyldopa Tab Ip 250Mg Film Coated [ 202] , Nifedipine Cap Ip 5Mg [ 203] , Nifedipine Tablets Ip 10 Mg (Sustained Release) [204] , Nitroglycerin Inj 5 Mg/ Ml [205] , Propranolol Tab Ip 40 Mg [207] , Streptokinase Injection 15 Lac Units Ip [209] , Verapamil Tab Ip 40 Mg Film Coated [211] , Labetalol Tab Ip 100Mg [410] , Labetalol Hcl Inj Ip 20Mg/4Ml [411] , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg) [ 444] , Amlodipine And Enalapril Maleate Tablets (Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg) [457] , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) [458] , Losartan Potassium And Hydrochlorothiazide Tablets Ip(Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg) [459] , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril (Anhydrous) 5 Mg [460] , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg) [461] , Atenolol Tab Ip 25 Mg [ 462] , Enalapril Maleate Tablets Ip 10 Mg [463] , Lisinopril Tablets Ip 10 Mg [465] , Lisinopril Tab Ip 2.5 Mg [466] , Losartan Tab Ip 25 Mg [ 467] , Adenosine Injection Ip 6 Mg/2Ml [547] , Atorvastatin Tablets Ip 40 Mg [548] , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg [ 549] , Fenofibrate Capsules/ Tab Ip 200 Mg [550] , Isoprenaline Injection Ip 2Mg / Ml [551] , Metoprolol Tablets Ip 25 Mg [552] , Metoprolol Succinate Extended Release Tablets Ip 50 Mg [553] , Noradrenaline Injection Ip 2 Mg/Ml [554] , Prazosin Tablets ( Extended Release) 2.5 Mg [555] , Telmisartan Tablets Ip 40 Mg [556] , Urokinase Injection 5 Lac Unit (Lyophilized) [ 557] , Ramipril Tablets Ip 2.5 Mg [636] , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets [650] , Clonidine Hydrochloride Tablet Ip 0.1 Mg (Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg) [751] , Sotalol Hydrochloride Tablet Usp/Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp/Bp 40Mg) [752] , Esmolol Hydrochloride Injection 10Mg/Ml 10Ml Size [753] , Carvedilol Tablet 3.125 Mg [755] , Rosuvastatin Tablet Ip 20 Mg (Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg) [ 756] , Rosuvastatin Tablet 10 Mg [757] , Sacubitril 24 Mg And Valsartan 26 Mg Tablet [ 758] , Chlorhexidine Mouthwash Ip 0.2 O/O [ 580] , Dental Gel Choline Salicylate 8.7 O/O, Benzalkonium Chloride 0.01 O/O, Lignocaine Hcl 2 O/O (Flavoured Gel Base) [581] , Tooth Gel Sodium Monofluorophosphate 0.7 O/O And Potassium Nitrate 5 O/O (In Flavoured Base) [582] , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% [583] , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel [ 584] , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O/O + Salicylic Acid 3 O/O [106 ] , Acyclovir Cream 5% [ 213] , Cetrimide Cream Ip 0.50 O/O [215A] , Fusidic Acid Cream Ip 2 % [216A] , Glycerin Ip 400 Gm [217 ] , Liquid Paraffin Ip 400 Ml [218] , Miconazole Nitrate Cream Ip 2% [220] , Povidone Iodine Ointment 5% 15 Gm [221 ] , Neomycin Bacitracin And Sulphacetamide Powder (Neomycin 5 Mg , Bacitracin 250 Units, Sulphacetamide 60 Mg) [ 223] , Silver Sulphadiazine Cream Ip 1% 50Gm Tube [224] , Gentian Violet Topical Solution Usp 1O/O [246] , Clotrimazole Mouth Paint (Clotrimazole 1 O/O W/V) [443] , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) [445] , Gamma Benzene Hexachloride Lotion 1% (Lindane Lotion Usp) [ 446] , Betamethasone Dipropionate Cream Ip 0.05% [558] , Betamethasone Lotion Ip 0.05 O/O [559] , Clindamycin Phosphate Gel Usp 1 O/O [560] , Clobetasol Propionate Cream Ip 0.05 O/O [561] , Glycerin Ip [564] , Ketoconazole Cream Bp 2% [565] , Permethrin Lotion 5% [ , Permethrin Cream 5% [ 569] , Tretenoin Cream Usp 0.025% [570] , Coal Tar 6% & Salicylic Acid 3% Ointment [670] , Calamine Lotion Ip 100Ml [671] , Powder Clotrimazole 1 % W/W 30 Gm [759] , Terbinafine Cream 1%W/ W (10 Gm Tube) [760] , Oitment Mupirocin Ip 2 % [762] , Anti Blood Grouping Serum/Reagent ( Combi Kit Of Anti A, B & D Monoclonal Serum/ Reagent) [802] , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% (Iodine Conc.= 292 Mg/Ml) [232 ] , Diatrizoate Meglumine And Diat Sod Inj Usp 76 %W/V (Iodine = 370 Mg/ Ml) [233] , Vdrl Antigen (With + Ve And - Ve Control) / Rpr Slide Kit [242] , Iohexol Usp (Solution For Injection) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine/Ml [482] , Iohexol Usp(Solution For Injection) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine/Ml [672] , Multistix Test Strip [801 ] , Povidone Iodine Solution Ip 5 % 500 Ml [222] , Compound Benzoin Tincture Ip [244] , Formaldehyde Solution ( 34.5 Per. - 38 Per.) [245] , Gluteraldehyde Solution 2% [247] , Hydrogen Peroxide Solution Ip 6 O/O (20 Vol) [248] , Lysol (Cresol With Soap Solution) Ip (Cresol 50 O /O + Soap 50 O/O) [249] , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O/O W/V Povidone Iodine ( Suitable For Hand Wash) [ 250] , Surgical Spirit Ip (500 Ml) [252] , Chlorhexidine Gluconate Solution 5% 250 Ml [ 447] , Surgical Spirit Ip (100 Ml) [449] , Povidone Iodine Solution Ip 5% 100Ml Bottle [ 450] , Povidone Iodine Ointment Usp 5 O/O 250 Gm [571] , Povidone Iodine Solution Ip 10 % [572] , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar [573] , Acetazolamide Tab Ip 250Mg [253] , Frusemide Tab Ip 40 Mg [254] , Furosemide Injection Ip 10Mg/Ml (Im And Iv Use) [255] , Hydrochlorthiazide Tab Ip 12.5 Mg [256] , Mannitol Inj Ip 20% W/V [257A] , Spironolactone Tab Ip 25Mg [258] , Torsemide Tab 10 Ip Mg [259] , Hydrochlorthiazide Tab Ip 25Mg [464] , Spironolactone Tablets Ip 50 Mg [574] , Ciprofloxacin 0.3 O/O And Dexamethasone 0.1 O/O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp/ Ciprofloxacin 0.3 O/O And Dexamethasone 0.1 O/O Eye Drops/Ear Drops [585] , Clotrimazole 1 O/O With Beclomethasone Dipropionate 0.025 O/O Ear Drops [586] , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp [588] , Ceruminolytic Drops ( Wax Dissolving Ear Drops) Paradichlorobenzene 2 O /O , Benzocaine 2.7 O/O , Chlorbutol 5 O/O, Turpentine Oil 15 O/O [ 589] , Drotaverine Hydrochloride Inj 40 Mg /2 Ml [5] , Ointment Containing Lidocaine Ip 3 O/O Zinc Oxide Ip 5 O/O , Hydrocortisone Ip 0.25 O/O, Allantoin Ip 0.5 O/O [219] , Antacid Tablets.Formula ,Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil [260A] , Antacid Liquid,Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg [261A] , Bisacodyl Tab Ip 5 Mg [ , Dicyclomine Tab Ip 10 Mg [263] , Dicyclomine Inj Ip 10 Mg /Ml [264] , Dicyclomine Hydrochloride Oral Solution Ip 10Mg /5Ml [ 265] , Domperidone Suspension Ip 5Mg/5Ml [266] , Domperidone Tab Ip 10 Mg [267] , Hyoscine Butylbromide Inj Ip 20 Mg/ Ml [268] , Loperamide Tab Ip 2 Mg [269] , Metoclopramide Inj Ip 10Mg/2Ml [270] , Metoclopramide Tab Ip 10 Mg [271] , Omeprazole Cap Ip 20 Mg [272] , Ondansetron Inj Ip 2Mg/ Ml [273] , Ors Powder Ip [274] , Pentoprazole Inj 40 Mg [275] , Ranitidine Hcl Injection Ip 50Mg/2Ml [ 276] , Ranitidine Tab Ip 150Mg Film Coated [ 277] , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O/O Disodium Hydrogen Phosphate Dodecahydrate 8 O/O [ 278] , Hyoscine Butyl Bromide Tablets Ip 10Mg [414] , Drotaverine Tab Ip 40 Mg [415] , Ranitidine Tab Ip 300Mg Film Coated [ 433] , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg [438] , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets [439A] , Metoclopramide Hydrochloride Syrup Ip 5 Mg/ 5Ml [478] , Domperidone Oral Drops Ip 10Mg/ Ml ( 10Ml) [590] , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg [591] , Lactic Acid Bacillus Tab 60 Million Spores [592] , Lactulose Solution Usp/ Bp 10Gm/15Ml Or 3.35 Gm/5Ml [593] , Liquid Paraffin Ip 100 Ml [594] , Ondansetron Orally Disintegrating Tablets Ip 4Mg [595] , Pantoprazole 40Mg And Domperidone 30Mg Special Repair Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Special Repair Pellets [596] , Ursodeoxycholic Acid Tablets Ip 300 Mg [597] , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet (Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) [763] , Probiotic Sachets 1 Gm Size (Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores) [765] , Mesalamine Tablet Ip 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Ip 1.2 Gm) [ 766] , Allopurinol Tablets Ip 100 Mg [598] , Hydroxychloroquine Sulphate Tablets Ip 200Mg [599] , Leflunomide Tablets Ip 10Mg(Film Coated) [600 ] , Leflunomide Tablets Ip 20Mg (Film Coated) [601 ] , Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip [602] , Biphasic Isophane Insulin Inj Ip (30 % Soluble Insulin And 70 % Isophane Insulin) Inj. 40 Iu/Ml(R-Dna Origin) [ 279] , Carbimazole Tabs Ip 5 Mg [280] , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg/Ml [ 281] , Clomifene Tab Ip 25 Mg [282] , Clomiphene Tab Ip 50 Mg [283] , Conjugated Estrogen Tabs Usp 0.625 Mg. [ 284] , Dinoprostone Cream/ Gel 0.5 Mg Dinoprostone In Syringe [285] , Ethinyloestradiol Tabs Ip 50 Mcg [286] , Glibenclamide Tab Ip 5 Mg , Gliclazide Tab Ip 40 Mg [288] , Glimepiride Tab Ip 2 Mg [289] , Glimepiride Tab Ip 1Mg [290] , Glipizide Tab Ip 5Mg [ 291] , Hydroxyprogesterone Inj Ip 250Mg /Ml [293] , Isophane Insulin Inj Ip 40 Iu /Ml [294] , Metformin Tab Ip 500 Mg [295] , Norethisterone Tab Ip 5 Mg [296] , Pioglitazone Tab Ip 15 Mg [297] , Progesterone Inj Ip 200 Mg/ 2Ml [298] , Insulin Injection Ip ( Soluble Insulin/Neutral Insulin Injection)40 Iu/ Ml(R.Dna Origin) [300] , Thyroxine Sodium Tablets Ip 100Mcg [301] , Metformin Hydrochloride(Sustained Release Tablets Ip 1000 Mg [451] , Glipizide And Metformin Hydrochloride Tablets Usp (Glipizide 5 Mg, Metformin Hydrochloride 500 Mg) [ 452] , Glibenclamide And Metformin Hydrochloride (Sr) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release) [453] , Metformin Hcl ( Sustained Release) And Glimepiride Tab Metformin Hcl ( Sustained Release) 500Mg ,Glimepiride 1Mg [454] , Metformin Hydrochloride ( Sustained Release) And Glimepiride Tablets Ip ( Metformin Hydrochloride(Sustained Release) 500 Mg, Glimipiride 2Mg) [455] , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg , Metformin Hydrochloride ( Sustained Release) 500 Mg [456] , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) [603] , Medroxyprogesterone Acetate Tablets Ip 10 Mg [605] , Thyroxine Tablets Ip 50 Mcg , Insulin Glargine 3Ml ( 100Iu/Ml) With 15 Insulin Syringes And Needles/Cartridge 3Ml ( 100Iu/Ml) With 15 Needles And 1 Pen Per 20 Cartridges [680] , Tenaligliptin Tablet Ip 20Mg [682] , Insulin Glargine 10 Ml Vial (100 Iu/Ml) With 30 Insuline Syringes With Needle [693] , Human Anti D Immunoglobulin Injection 300Mcg (Im Use) [303] , Human Anti D Immunoglobulin 150 Mcg [304] , Human Rabies Immunoglobulin Inj 150 Iu/ Ml [305] , Rabies Vaccine Human ( Cell Culture) Ip ( Intradermal) 2.5 Iu [ 306] , Rabies Vaccine Human ( Cell Culture) Ip ( Intramuscular) 2.5 Iu/ Dose [307] , Snake Venum Anti Serum Ip (Lyophilized) Polyvalent Anti Snake Venum,Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum,0.45 Mg Of Common Kraite( Bungaras)Venum(Details In Rc) [308] , Tetanus Immunoglobulin Ip 250 Iu/ Vial [309] , Tetanus Vaccine ( Adsorbed) Ip 5 Ml Vial [ 310] , Rabies Antiserum Ip ( Equine) 300 Units Per Ml Contains Equine Anti- Rabies Immunoglobulin Fragments (I.M./Sc Use) [408] , Diphtheria Antitoxin 10000 Iu [480] , Hepatitis B Immunologlobin Injection Ip 200 I.U [767 ] , Atracurium Inj 10 Mg/Ml [311] , Glycopyrrolate Inj Ip 0.2 Mg/Ml [312] , Midazolam Inj Ip 1 Mg/ Ml [313] , Neostigmine Inj Ip 0.5 Mg/Ml [314] , Succinylcholine Inj. Ip 50 Mg/Ml (Iv Use) [317] , Valethamate Bromide Inj 8Mg / Ml [318] , Vecuronium Bromide For Injection 4Mg ( Freeze Dried) [419] , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets (Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325Mg) [610] , Neostigmine Injection Ip 2.5Mg/5Ml [638] , Tropicamide Eye Drop Ip 1O/O [241] , Atropine Eye Ointment Ip 1% [319] , Atropine Sulphate Ophthalmic Solution Usp 1% [320] , Chloramphenicol Eye Drops Ip 0.5 0/0 [321] , Ciprofloxacin Eye Drops Ip 0.3 O/O W/V / Ciprofloxacin Eye/Ear Drops Ip 0.3 O/O W/V [ 322] , Ciprofloxacin Ophthalmic Ointment Usp 0.3% [323] , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml [324] , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O/O +0.1 O/O [ 330] , Tobramycin Eye Drops 0.3% [331] , Tobramycin Ophthalmic Ointment Usp 0.3% [ 332] , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O/O W/V [421] , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. [423] , Lidocaine Hcl Topical Solution Usp 4% [424] , Fluconazole Eye/Ear Drops 0.3% [425] , Timolol Eye Drops Ip 0.5 O/O W/V [484] , Homatropine Eye Drops Ip 2% [485] , Travoprost Eye Drops Ip 0.004 O/O [486] , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% [ 487] , Betaxolol Eye Drops 0.5 O/O [612] , Carboxymethylcellulose Eye Drops Ip 0.5% [613 ] , Acyclovir Eye Ointment Ip 3% W/W 5Gm Size [ 769] , Eye Drop Moxifloxacin 0.5% W/V Ophthalmic Solution Ip 5Ml Size [ 770] , Chloramphenicol 1% W/ W Eye Ointment Ip, 3Gm Size [771] , Isoxsuprine Inj Ip 5 Mg/ Ml [333] , Isoxsuprine Tab Ip 20 Mg [334] , Methylergometrine Inj Ip 0.2 Mg/Ml [335] , Methylergometrine Tab Ip 0.125 Mg [336] , Misoprostol Tab Ip 200 Mcg [337] , Oxytocin Inj Ip 5 Iu/Ml [338] , Mifepristone Tab Ip 200Mg [615] , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg (Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg)/Natural Micronised Progesteron Tablet 200 Mg (Each Tablet Contains Progesteron Ip 200 Mg) [772] , Cabergoline Tablet Ip 0.5Mg (Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg) [ 773] , Human Chorionic Gonadotropin Injection Ip 5000 I.U. [774] , Alprazolam Tab Ip 0.25 Mg [339] , Alprazolam Tab Ip 0.5Mg [340] , Amitriptyline Tab Ip 25Mg Film Coated [341 ] , Chlordiazepoxide Tablets Ip 10Mg [342] , Chlorpromazine Tablets Ip 100 Mg (Coated Tablet) [343] , Chlorpromazine Tablets Ip 25 Mg [344] , Chlorpromazine Tablets Ip 50 Mg (Coated Tablets) [345] , Diazepam Inj Ip 10Mg/ 2Ml (1M/Iv Use) [349] , Diazepam Tab Ip 5 Mg [350] , Escitalopram Tab Ip 10 Mg [351] , Fluoxetine Cap/Tab Ip 20Mg [352] , Haloperidol Inj Ip 5 Mg/ Ml [353] , Haloperidol Tab Ip 1.5 Mg [354] , Haloperidol Tab Ip 5 Mg [355] , Imipramine Tab Ip 25 Mg (Coated Tab) [356] , Imipramine Tab Ip 75 Mg (Coated) [357] , Lithium Carbonate Tab Ip 300 Mg [358] , Lorazepam Inj Ip 2 Mg/ Ml [359] , Olanzapine Tab Ip 5 Mg [360] , Risperidone Tab 2Mg [ 361] , Risperidone Tab 1 Mg [ 362] , Sertraline Tab Ip 50 Mg [363] , Trifluperazine Tab Ip 5 Mg Coated [364] , Clonazepam Tablet 0.5Mg , Levosulpiride Tablet 25 Mg (Each Uncoated Tablet Contains Levosulpiride 25 Mg) [ 777] , Lorazepam Tablet Ip 2 Mg (Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) [ 778] , Zolpidem Tablet 5 Mg [ 779] , Aminophylline Inj Ip 25 Mg/Ml [365] , Beclomethasone Inhalation Ip 200 Mcg/ Dose [366] , Budesonide Nebulizer Suspension 0.25Mg/Ml [ 367] , Ipratropium Bromide Nebulizer Solution 250 Mcg/ Ml [369] , Salbutamol Tablet Ip 4 Mg [370] , Salbutamol Inhalation 100 Mcg /Dose [371] , Salbutamol Nebuliser Solution Bp 5 Mg/Ml [ 372] , Salbutamol Tab Ip 2 Mg [373] , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg) [374] , Theophylline And Etofylline Tablets Ip ( Theophylline Ip 23Mg + Etofylline Ip 77 Mg) [ 375] , Theophylline Tablet 400Mg Sustained Release/ Controlled Release (Theophylline Prolonged Released Tablet Ip) [376] , Salbutamol Syrup Ip 2Mg/ 5Ml [432] , Saline Nasal Solution ( Drops) (Sodium Chloride 0.65 O/O) [442] , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg [616] , Budesonide Powder For Inhalation Ip 200 Mcg [ 617] , Ipratropium Powder For Inhalation Ip 40 Mcg [ 618] , Terbutaline Tablets Ip 2.5 Mg [619] , Xylometazoline Nasal Drops Ip 0.1% [620] , Cough Syrup/ Expectorant(50) Ml ( Detail In Rc) [692] , Acebrophylline Tablet/ Capsule 100 Mg [780] , Compound Sodium Lactate Inj. Ip [377] , Dextrose Inj Ip 25% W/ V [378] , Dextrose Inj Ip 10% [ , Dextrose Inj Ip 5% [380 ] , Multiple Electrolytes And Dextrose Injection Type I Ip (Electrolyte P Injection ) [381] , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) [382] , Potassium Chloride Inj. Ip 0.15 Gm/Ml [383] , Potassium Chloride Oral Solution U.S.P 500Mg/ 5Ml [384] , Sodium Chloride And Dextrose Injection Ip 0.9 O/O + 5 O/O [385] , Sodium Chloride Inj Ip 500 Ml [386] , Sodium Chloride Injection Ip 100 Ml [621 ] , Ringer Acetate Infusion 500 Ml [781] , Sodium Chloride 0.45% W/V Polypack 500 Ml [ 782] , Finasteride Tablets Ip 5 Mg [575] , Tamsulosin Hcl Tablets/ Capsule 0.4 Mg [576] , Flavoxate Tablets Ip 200 Mg (Coated Tablet) [ 579] , Sodium Bicarbonate Tablet Usp 1 Gm (Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm) [784] , Dutasteride Tablet 0.5 Mg [787] , Alkylizer 1.4Gm To 1.53 Gm Per 5 Ml(Disodium Hydrogen Citrate) Syrup /Solution [788] , Betahistine Tab Ip 8 Mg [541] , Betahistine Tab Ip 16 Mg [542] , Cinnarizine Tablets Ip 25 Mg [543] , Cinnarizine Tablet Ip 75 Mg [544] , Ascorbic Acid Tab Ip 500 Mg [387] , Calcium Gluconate Inj Ip 10% (Iv Use) [388] , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip- Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg [390] , Ferrous Sulphate With Folic Acid Tab ( Paediatric) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg [391] , Folic Acid Tab Ip 5 Mg [392] , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D- Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg [393 ] , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6- 0.5Mg Vit-C-50Mg Calcium Pantothenate- 1Mg Vit-D3-200Iu Vit- B2-2 Mg Niacinamide- 25Mg Folic Acid-0.2 Mg [394] , Vitamin B Complex Inj Nfi [395] , Vitamin B Complex Tablet Nfi (Prophylactic) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg (With Appropriate Overages) [ 397] , Vitamin A Paediatric Oral Solution Ip( Vitamin A Concentrate Oil Ip)Each Ml Contains Vitamin A 100000 Iu [ 409] , Calcium And Vitamin D3 Suspension (Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) [441] , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg [448 ] , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg [ 472] , Iron Sucrose Injection Usp/Bp 20Mg/Ml (For Iv Use) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg [ 488] , Calcium With Vitamin D Tablets Usp /Calcium And Colecalciferol Tablets Bp/Calcium And Vitamin D3 Tablets Ip( Elemental Calcium 500 Mg, Vitamin D3-250 Iu) (Non-Chewable) [622] , Cholecalciferol Granules 60000 Iu /Gm Or Soft Gelatin Capsule/Tablet 60000 Iu/Capsule / Tablet [623] , Mecobalamin Inj 500 Mcg/Ml [624] , Pyridoxine Tablet Ip 40Mg [627] , Thiamine Tablets Ip 100 Mg [629] , Calcitriol Capsules Ip 0.25 Mcg [630] , Methyl Cobalmine Tablet 500Mcg [652] , Methyl Cobalmine Tablet 1500Mcg [653] , Vitamin D3 Oral Solution 60000 Iu [676] , Ferric Carboxymaltose Injection 50 Mg/Ml 10 Ml Size [789] , Multi Vitamin Syrup [ 790] , Flunarizine Tab 5 Mg [ 147] , Black Disinfectant Fluid (Phenyl) As Per Schedule O Grade Iii [ 398] , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can [399] , Peritonial Dialysis Solution Ip [401] , Sodium Bicarbonate Inj Ip 7.5% W/V [402] , Water For Inj Ip [404] , Normal Human Intravenous Immunoglobulin 5G/ 100Ml [633] , Pregabalin Cap Ip 75 Mg [634] , Surfactant For Intratrecheal Instillation (Natural Bovine Lung Surfactant) [635] , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans [687] , Pyridostigmine Tablet Ip 60 Mg (Each Tablet Contains Pyridostigmine Ip 60 Mg ) [792] , Caffeine Citrate Usp Injection 20Mg/Ml ( Equivalent To 10 Mg Caffeine Base/Ml) 3Ml Size [793] , Vitamin E Soft Gelatin Capsule 400 Mg [795] , Inj Poractant Alpha 80 Mg/Ml In Pack Of 1.5 Ml (Detail In Rc) [796] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 [R1] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 [R2] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 [R3] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -1/0 [R4] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 [R5] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 30 Mm Length 76 Cm) Size-2/0 [R6] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 [R7] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size - 3/0 1/2Cir Rb Needle 20Mm Length 70 Cm [R9] , Absorbable Surgical Suture (Synthetic) Sterilised Needled ( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-2/0 1/2 Cir Rb Needle 30Mm Length 90 Cm [R10] , Absorbable Surgicalsuture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle Size- 1/0 30Mm Length 90 Cm [R11] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co -L-Lactide)Size 1 1/2 Cir Tapercut Needle (Heavy ) 40Mm Length 90 Cm [ R12] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-1 1/2 Cir Rb Needle40Mm Length 90 Cm [R13] , Absorbable Surgical Suture(Synthetic) Sterilised Needled( Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co -L-Lactide)Size-3/0(1/2 Cir Conventional 25Mm Length 90 Cm)Undyed [ R14] , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-4/0 (1/2 Cir Rb Needle 20Mm Length 70 Cm) [R15] , Absorbable Surgical Suture (Synthetic) Sterilised Needled ( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm [ R16] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin / Polyglycolic Acid / Poly (Glycolide-Co-L-Lactide) Size-1/0(1/2 Cir Rb Needle 40Mm Length 90 Cm) [R17] , Absorbable Surgical Suture (Synthetic) Sterilised Needled( Braided) Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co -L-Lactide)Size 3/0 3/8 Circle Cutting Needle 22Mm Length 45 Cm [ R18] , Absorbable Surgical Suture(Synthetic) Sterilised Needled( Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co -L-Lactide)Size-4/0 3/8 Circle Cutting 16Mm Needle,Suture Length 70Cm [R19] , Chromic Catgut Suture(3/ 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm) Size 5/0 (Details In Rc) [R76] , Chromic Catgut Suture(3/ 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm) Size 6/0 (Details In Rc) [R77] , Chromic Catgut Suture(3/ 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm) Size 4/0 ( Details In Rc) [R80] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0 (1/2 Cir Rb Needle 20Mm, Length 76 Cm) [ R20] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/ 0(3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) [R21] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2/0 (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) [R22] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 8/0 (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) [R23] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 3/0 (3/8 Conventional Cutting Needle 16Mm Length 70 Cm) [R24] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 2/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) [R27] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 1/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(3/8Cir Rb 16 Mm Needle, Length 70 Cm) [R32] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1/0(1/2 Cir Rb Needle 30Mm Length 90 Cm) [R33] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1(1/2 Cir Rb Heavy Needle 45Mm Length 90 Cm) [R34] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm [R37] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Cir Rb Needle 30Mm, Length 90 Cm) [R38] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0(3/8 Cir Cutting Needle 25Mm Length 45 Cm) [R44] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) [R45] , B.B Silk Suture (3/8 Cir Rb Needle 20Mm, Length 76 Cm Size 4/0 ( Details In Rc) [R78] , B.B Silk Suture (3/8 Cir Rb Needle 16Mm, Length 76 Cm Size 5/0 ( Details In Rc) [R79] , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecap /Polyglyconate Size 3/0 (3/8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm) [R64] , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1/0(1/2 Circle Rb 30Mm Needle,Length 70Cm) [R67] , Absorbable Surgical Suture(Synthetic) Antibacterial Coated Sterilised Needled( Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm [R68] , Absorbable Surgical Suture(Synthetic) Antibacterial With Sterilised Needled( Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1/0 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm [R69] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 2/0 1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm [ R70] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet )Size 1 1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm [R71] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet )Size 1/0 1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm [R72] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture( Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 3/0 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm [R73] , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet )Size 3/0 3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm [ R74] , Absorbable Gelatin Sponge 80 X 50X 10Mm( Details In Rc) [S1] , Asepto Syringe With Transparent Bulb Sterile, 60 Ml [S3] , Blood Administration Set Blood Transfusion Set (Details In Rc) [S4] , Gloves Size 6.5 Inches, Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S5.A] , Gloves Size 6.5 Inches, Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S5.B] , Gloves Size 7 Inches, Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S6.A] , Gloves Size 7 Inches, Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S6.B] , Gloves Size 7.5 Inches, Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) [ S7.A] , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves) (Details In Rc) [S7.B] , Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc) [S8.A] , Suction Catheter, Sterile.Size: F G-6 (Details In Rc) [S8.B] , Suction Catheter, Sterile. Size: F G-8 (Details In Rc) [S8.C] , Suction Catheter, Sterile. Size: F G-10 (Details In Rc) [S8.D] , Suction Catheter, Sterile. Size: F G-12 (Details In Rc) [S8.E] , Suction Catheter, Sterile. Size: F G-14 (Details In Rc) [S8.F] , Suction Catheter, Sterile. Size: F G-16 (Details In Rc) [S8.G] , Suction Catheter, Sterile. Size: F G-18 (Details In Rc) [S8.H] , Suction Catheter, Sterile. Size: F G-20 (Details In Rc) [S8.I] , Suction Catheter, Sterile. Size: F G-22 (Details In Rc) [S8.J] , Catheter,Size 8(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.A] , Catheter,Size 10(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.B] , Catheter,Size 16(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.C] , Catheter,Size 18(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.D] , Catheter,Size 20(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.E] , Catheter,Size 22(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.F] , Catheter,Size 24(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,) Silicon Coated Natural Latex Material(Details In Rc) [S9.G] , Infant Feeding Tube Size 10Fg(Details In Rc ) [S10.A] , Infant Feeding Tube Size 8Fg(Details In Rc) [S10.B] , Infant Feeding Tube Size 5Fg(Details In Rc) [S10.C] , Perfusion Set With Airway And Needle,( Adult Use) Sterile Disposable(Details In Rc) [S11] , Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use) Sterile Disposable( Details In Rc) [S12] , Infusion Set With Microdrip,(I.V.)Sterile Disposable(Details In Rc) [S13] , Insulin Syringe ( 40 Units ) With (Fixed) 30 G Needle Shall Conforn To Is 12227 [S14] , Sterile Disposable ( Single Use) Teflon/ Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G (Details In Rc) [S15.A] , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.) Size 18G (Details In Rc) [S15.B] , Sterile Disposable ( Single Use) Teflon/ Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G (Details In Rc) [S15.C] , Sterile Disposable ( Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G (Details In Rc) [S15.D] , Sterile Disposable ( Single Use) Teflon/ Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc) [S15.E] , Mucus Extractor Sterile( Details In Rc) [S16] , Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc) [S17.A] , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics (Details In Rc) [S17.B] , Paper Adhesive Plaster 1Inx9 Mts(With Cutter), Non Woven, Non Allergic And Strong Adhesive But Gentle To Skin, Should Conform To The Standards And Test As Per Is And Bp Standard (Detail In Rc) [S18] , Paper Adhesive Plaster 2In X 9.0 Mts(With Cutter), Non Woven, Non Allergic And Strong Adhesive But Gentle To Skin, Should Conform To The Standards And Test As Per Is And Bp Standard (Detail In Rc) [S19] , Paper Adhesive Plaster 3Inx9Mts(With Cutter), Non Woven, Non Allergic And Strong Adhesive But Gentle To Skin, Should Conform To The Standards And Test As Per Is And Bp Standard (Detail In Rc) [S20] , Plaster Of Paris Bandage 15Cm X 2.7 Mts/Roll [ S21] , Plaster Of Paris Bandage 10Cm X 2.7Mts [S22] , Ryles Tube / Nasogastric Tube Size: 10(Details In Rc) [S23.A] , Ryles Tube / Nasogastric Tube Size: 12(Details In Rc) [S23.B] , Ryles Tube / Nasogastric Tube Size:14 (Details In Rc) [S24.A] , Ryles Tube / Nasogastric Tube Size: 16 (Details In Rc) [S24.B] , Ryles Tube / Nasogastric Tube Size: 18 (Details In Rc) [S24.C] , Scalp Vein Set ( Disposable) Size 18G ( Details In Rc) [S25.A] , Scalp Vein Set ( Disposable) Size 20G ( Details In Rc) [S25.B] , Scalp Vein Set ( Disposable) Size 22G ( Details In Rc) [S25.C] , Scalp Vein Set ( Disposable) Size 24 G ( Details In Rc) [S25.D] , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile,Single Use Disposable(Details In Rc ) [S26] , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile,Single Use Disposable(Details In Rc) [S27] , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile,Single Use Disposable(Details In Rc) [S28] , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile,Single Use Disposable(Details In Rc) [S29] , Surgical Blade Sterile, Size 11(Details In Rc) [ S30.A] , Surgical Blade Sterile, Size 15(Details In Rc) [ S30.B] , Surgical Blade Sterile, Size 22(Details In Rc) [ S30.C] , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1/2 Inch ( Details In Rc) [S39.A] , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1/2 Inch ( Details In Rc) [S39.B] , Urine Collecting Bag, Disposable 2000 Ml( Details In Rc) [S40] , Endotracheal Tube, Plain - Size 2.5 (Details In Rc) [S43.A] , Endotracheal Tube, Plain - Size 3 (Details In Rc) [S43.B] , Endotracheal Tube, Plain - Size 3.5 (Details In Rc) [S43.C] , Endotracheal Tube, Plain - Size 4 (Details In Rc) [S43.D] , Endotracheal Tube, Plain - Size 4.5 (Details In Rc) [S43.E] , Endotracheal Tube, Plain - Size 5 (Details In Rc) [S43.F] , Endotracheal Tube, Plain - Size 5.5 (Details In Rc) [S43.G] , Endotracheal Tube, Plain - Size 6 (Details In Rc) [S43.H] , Endotracheal Tube, Plain -Size 6.5 (Details In Rc) [S43.I] , Endotracheal Tube, Plain - Size 7 (Details In Rc) [S43.J] , Endotracheal Tube, Plain - Size 7.5 (Details In Rc) [S43.K] , Endotracheal Tube, Plain - Size 8 (Details In Rc) [S43.L] , Endotracheal Tube, Plain - Size 8.5 (Details In Rc) [S43.M] , Endotracheal Tube, Cuffed - Size 4 (Details In Rc) [S44.A] , Endotracheal Tube, Cuff - Size 4.5 (Details In Rc) [S44.B] , Endotracheal Tube, Cuff - Size 5 Details In Rc [ S44.C] , Endotracheal Tube, Cuff - Size 6 (Details In Rc) [ S44.D] , Endotracheal Tube, Cuff - Size 6.5 (Details In Rc ) [S44.E] , Endotracheal Tube, Cuff - Size 7 (Details In Rc) [S44.F] , Endotracheal Tube, Cuff - Size 7.5 (Details In Rc ) [S44.G] , Endotracheal Tube, Cuff - Size 8 (Details In Rc) [ S44.H] , Endotracheal Tube, Cuff - Size 8.5 (Details In Rc) [S44.I] , Endotracheal Tube, Cuff - Size 9 (Details In Rc) [ S44.J] , Tracheostomy Tube, Plain - All Sizes(Details In Rc) [S45] , Tracheostomy Tube ( Pvc), Cuffed - All Sizes (Details In Rc) [S46] , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc) [S47.A] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) Size 28 ( Details In Rc) [S47.B] , Abdominal Drain Kit, Sterile,Having Drainage Cather And Collection Bag(2000) Ml Size 32 ( Details In Rc) [S47.C] , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm [S73] , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm [S74] , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm( Details In Rc) [S79] , Bone Wax Sterilised [ S80] , Skin Graft Knife Blade ( Sterile)(Details In Rc) [ S82] , K Wire, Length 375 Mm; 1Mm(Details In Rc) [ S84.A] , K Wire, Length 375 Mm; 1.6Mm(Details In Rc) [ S84.B] , K Wire, Length 375 Mm; 1.8Mm(Details In Rc) [ , Face Mask, Disposable( Details In Rc) [S85] , Surgical Cap Disposable (For Surgeons)(Details In Rc) [S86.A] , Surgical Cap, Disposable (For Nurses) (Details In Rc)(Details In Rc) [S86.B] , Foldable Intra Ocular Lense With Injector ( Details In Rc) 11 To 17.5 [S87.A] , Foldable Intra Ocular Lense With Injector ( Details In Rc) 18 To 24 [ S87.B] , Foldable Intra Ocular Lense With Injector ( Details In Rc) 24.5 To 28.5 [S87.C] , Standard Pama Intra Ocular Lenses (Details In Rc) 11 To 17.5 [S88.A ] , Standard Pama Intra Ocular Lenses (Details In Rc) 18 To 24 [S88.B] , Standard Pama Intra Ocular Lenses (Details In Rc) 24.5 To 28.5 [S88 .C] , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powdered [S89.A] , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powder , Rubber Examination Gloves, Non-Sterile, Extra Small(Details In Rc) [S90.A] , Rubber Examination Gloves,Size Small ( Details In Rc) [S90.B] , Rubber Examination Gloves,Size Medium ( Details In Rc) [S90.C] , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile , Size Large (Details In Rc) [S90.D] , Pressure Monitoring Line / High Pressure Extension Line (Details In Rc) [S91] , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml (Details In Rc) [S92] , Umbilical Catheter For New Born, All Sizes -( Details In Rc) [S93] , Umbilical Cord Clamp ( Details In Rc) [S94] , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property( Details In Rc) [S95] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 16 (Details In Rc) [ S96.A] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 18 (Details In Rc) [ S96.B] , Bone Cement [S98] , Sanitary Napkin Beltless (Details In Rc) [S99.A] , Sanitary Pads Belt Type( Details In Rc) [S99.B] , Oxygen Mask (Adult) [ S100] , Oxygen Mask (Pediatric ) [S101] , Foleys Catheter No. 14 ( Detail In Rc) [S102] , Nelaton Catheter Size 14 Fg(Detail In Rc) [S103 ] , Ecg Electrode (Detail In Rc) [S104] , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 (Detail In Rc) [S105] , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml (Detail In Rc) [S106] , Urethral Catheter 90 ( Fg-14) Made Up Of Medical Grade Pvc ( , Urethral Catheter 91 ( Fg-10), Made Up Of Medical Grade Pvc ( Detail In Rc) [S108] , Vaccum Suction Set, 2.5 Meter Length (Detail In Rc) [S109] , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements (Detail In Rc) [S119] , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 10Cm (Non Pyrogenic & Single Use) (Detail In Rc) [S120] , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 50Cm (Non Pyrogenic & Single Use) (Detail In Rc) [S121] , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 100Cm (Non Pyrogenic & Single Use) (Detail In Rc) [S122] , 3 Way Stop Cock With Extension Tube (Vein-O Extension Line) Size 150Cm (Non Pyrogenic & Single Use) (Detail In Rc) [S123] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) (Detail In Rc) [S124] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) (Detail In Rc) [S125] , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube (Detail In Rc) [S126] , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property (Detail In Rc) [S127] , Sterile Disposable ( Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G (Detail In Rc) [S128] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Large Size For Ventilator Without Vent (Detail In Rc) [S129] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc) [S130] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Large Size For Bipap With Vent (Detail In Rc) [S131] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Covering (Nose & Mouth) Mask Adult Medium Size For Bipap With Vent (Detail In Rc) [S132] , Niv Mask (Noninvasive Ventilation Mask) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support (Detail In Rc) [S133] , Nebulization Mask Adult (Detail In Rc) [ S134] , Nebulization Mask Paediatric (Detail In Rc) [S135] , Eyelid Occlusion Dressing [S140] , Eye Pressure Shield [ S141] , Oseltamivir Capsule Ip 75 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg) [639 ] , Oseltamivir Capsule Ip 45 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg) [640 ] , Oseltamivir Capsule Ip 30 Mg (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg) [641 ] , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg/Ml (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) [642] , Act Kit Containing 3 Tablets Of Artesunate( 25Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(250Mg+ 12.5Mg) [645] , Act Kit Containing 3 Tablets Of Artesunate(50 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(500Mg+ 25Mg) [646] , Act Kit Containing 3 Tablets Of Artesunate( 100 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine( 750Mg+37.5Mg) [647] , Act Kit Containing 3 Tablets Of Artesunate( 150 Mg Each) And 2 Tablet Of Sulphadoxine And Pyrimethamine( 500Mg+25Mg) [648] , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate(200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine(750Mg+ 37.5Mg)Each Or 3 Tablets Of Sulphadoxine Pyrimethamine(500+25) Mg [649] , Racecadotril 100Mg Cap . Ip [Nrd-5] , Anti Oxidants (Beta Carotene 10 Mg,Vit E 25Mg,Vit C 100 Mg, Copper 1.5 Mg, Managanese 1.5 Mg, Zinc 7.5 Mg,Selenium 150 Microgram) Cap. [ Nrd-11] , Aprepitant 125 / 80 Mg Capsule / Tablet Kit ( Each Kit Contains 1 Capsule / Tablet Of 125 Mg And 2 Capsule / Tablet Of 80Mg) [Nrd- 12] , Formetrol 12Mcg And Budesonide 400 Mcg. Powder For Inhalation [ Nrd-24] , Indacaterol And Glycopyronium Inhalation Powder 110/ 50 Mcg Cap. [Nrd-25] , Ramipril Ip 5 Mg Capsule / Tablet Ip [ Nrd-32] , Silodosin 4 Mg Tablet / Capsule [Nrd-35] , Silodosin 8 Mg Tablet / Capsule [Nrd-36] , Benzoyl Peroxide Gel 2.5 % Ip [Nrd-48] , Hydroquinone 2% Cream Usp [Nrd-53] , Luliconazole 1% Cream Ip [Nrd-55] , Mometasone 0.1 % Cream Ip [Nrd-56] , Salmetrol 50Mcg And Fluticasone 500 Mcg Dpi Ip [Nrd-65] , Levosalbutamol 100Mcg And Ipratropium Bromide 40Mcg Dpi [ Nrd-70] , Diastase, Pepsin With Simethicone 15Ml Drop Each Ml Contains Diastase (1:1200) 33.33Mg, Pepsin (1:3000 ) 5Mg And Simethicone Emulsion 40Mg [Nrd- 71] , Hydroxyzine Hydrochloride Oral Solution / Drop 6Mg/Ml [Nrd-76] , Anticold Drop (Each Ml Contains Paracetamol 125Mg, Chlorpheniramine Maleate 1Mg And Phenylepherine Hydrochloride 2.5 Mg) 15 Ml [Nrd-78] , Vitamin D3 400Iu/Ml Drop [Nrd-84] , Vitamin D3 800Iu/Ml Drop [Nrd-85] , Natamycin Opthalmic Suspension 5% Eye Drop Ip [Nrd-94] , Olapatadine 0.1% And Ketorolac 0.4% Ophthalmic Solution [ Nrd-95] , Dorzolamide 2% Eye Drop Ip [Nrd-101] , Gatifloxacin 0.30% And Prednisolone Acetate 1 % Ophthalmic Suspension /Solution/ Eye Drop [Nrd-103] , Moxifloxacin 0.5% And Prednisolone 1% Ophthalmic Suspension / Solution/ Eye Drop [ Nrd-109] , Sodium Chloride 5 % Eye Drop Bp [Nrd-115 ] , Tropicamide 0.8% W/V And Phenylphrine Hcl 5 % W/V Eye Drop [Nrd- 118] , Chloramphenicol 1%, Polymyxin B Sulphate ( 10000 Units) And Dexamethasone 0.1% Sodium Phosphate Eye Ointment [Nrd-123] , Povidone Iodine Gargle 0.5% W/V [Nrd-128] , Azithromycin 10 Ml Vial Equaivelent To 500 Mg Inj. [Nrd-161] , Hepato Protective Tablet Each Film Coated Tablet To Contain: Matadoxine 500Mg, Silymarin 140Mg, L- Ornithine L-Aspartate 150Mg, Pyridoxine Hydrochloride 3Mg, Folic Acid 1.5Mg [Nrd -171] , Ceftriaxone 1000Mg And Salbactum 500Mg And Disodium Edetate 37Mg Inj [Nrd-185] , Degludec Insulin 100Iu/ Ml Injection 3Ml [Nrd- 211] , Doxycycline For Injection 100 Mg Inj. Usp [Nrd-221] , Fluconazole 200 Mg Inj. [Nrd-236] , Telmisartan40Mg And Hydroclorothiazide12.5 Mg, I.P. Each Tablet Contain Telmisartan40Mg And Hydroclorithiazide12.5 Mg, [Nrd-247] , Mefenamic Acid 250Mg And Dicyclomine Hydrochloride10Mg Each Tablet Contain Mefenamic Acid 250Mg And Dicyclomine Hydrochloride10Mg [ Nrd-259] , Combikit Of (Tab Fluconazole150Mg And Azithromycin 1Gm And Secnidazole1Gm) Each Kit Contain 1Tab Fluconazole150Mg And 1 Tab.Azithromycin 1Gm And 2 Tab.Secnidazole1Gm . [ Nrd-270] , Levofloxacine 500Mg/ 100 Ml Inj. Ip 100Ml Infusion [Nrd-273] , Mephentermine 30Mg/ Ml Injection 10Ml Vial [ Nrd-285] , Methylprednisolon Acetate 40Mg Inj. Ip [ Nrd-291] , Moxifloxin 400Mg/ 100Ml Inj. [Nrd-301] , Nandrolone Decanoate 50 Mg Inj. Ip [Nrd-305 ] , Sodium Chloride 0.9 O/O 500 Ml Glass Bottle Injection Ip [Nrd-315] , Piracetam 200Mg Inj. [ Nrd-336] , Reteplase 18 Mg Inj. [ Nrd-352] , Dolutegravir 50, Each Film Coated Tablet Contain Dolutegravir Sodium 50 Mg [Nrd- 388] , Vitamin D3 (600000 Iu) Inj. Ip [Nrd-402] , Fluticasone Propionate Nasal Spray Ip 50Mcg [ Nrd-429] , Levosalbutamol 1.25Mg And Ipratropium 500Mcg Respiratory Solution 2.5Ml [Nrd-454] , Budesonide 0.5 Mg/2Ml Respiratory Suspension [ , Nevirapine 200 Each Tablet Contain Nevirapine 200Mg [ Nrd-457] , Atazanavir300 Andritonavir100, Each Tablet Contain Atazanavir Sulphate Ip 300Mg Andritonavir Ip100Mg [Nrd-470] , Codiene Phosphate And Tripolidine Syrup (Each 5Ml Contains Codiene Phosphate 10Mg And Tripolidine 1.25Mg) [ Nrd-476] , Cefixime Oral Suspension/Dry Syrup 50Mg Each 5 Ml Contain Cefixime Oral Suspension/Dry Syrup 50Mg [Nrd-482] , Cefixime Oral Suspension / Dry Syrup 100Mg Each 5 Ml Contain Cefixime Oral Suspension/Dry Syrup100Mg [Nrd-483] , Cyproheptadine Hcl 2Mg / 5Ml Syrup I.P. [ Nrd-491] , Drotavarine Hcl 20Mg / 5Ml Syrup/Suspension [ Nrd-494] , Liquid Paraffin And Milk Of Magnesia Suspension (Each 15 Ml Contains: Milk Of Magnesia 11.25 Ml And Liquid Paraffin 3.75 Ml 170 Ml) [Nrd-495] , Paracetamol And Ibuprofen Syrup (Each 5Ml Contains Paracetamol 162.5Mg And Ibuprofen 100 Mg) 60Ml [Nrd-496] , Enzyme Syrup (Each 5Ml Contains Diastase 50Mg And Pepsin 10Mg ) 100Ml [Nrd-497] , Levofloxacin Oral Solution/ Syrup 125Mg / 5Ml [Nrd-503] , Mefenamic Acid 100 Mg/5Ml Suspension ( Each 5Ml Contains Mefenamic Acid 100 Mg) [Nrd-505] , Montelucast And Levocetrizine Syrup/ Suspension Each 5Ml Contains Montelucast 4Mg And Levocetrizine 2.5 Mg [Nrd-508] , Ondansetron Oral Suspension/Solution/ Syrup 2Mg/5Ml [Nrd- 510] , Phenobarbitone 20Mg/ 5Ml In 100Ml Syrup [ Nrd-512] , Sucralphate Syrup/ Suspension Each 5Ml Contains Sucralphate 500Mg [Nrd-521] , Zinc Oral Syrup / Solution / Suspension 20 Mg / 5Ml [Nrd-524] , Azithromycin 100Mg/5Ml Oral Syrup / Suspension [Nrd-525] , Azithromycin 200Mg/ 5Ml Oral Syrup / Suspension [Nrd-526] , Hydroxyurea 500Mg Tab./Cap. I.P. [Nrd- 528] , Aceclofenac And Paracetamol And Serratiopeptidase (100 And 325 And 15 Mg) Tab. [Nrd-538] , Cefpodoxime Proxetil Tablet 100Mg / Cefpodoxime Proxetil Dispersibletablet 100Mg [Nrd-571] , Cefpodoxime 200Mg Tab. I.P. [Nrd-572] , Clarithromycin 500Mg Tab. I.P. [Nrd-581] , Construction Of Trimoxazole Tablet Ip 480Mg ( Trimethoprim 80Mg And Sulphamethoxazole 400Mg) [Nrd-590] , Cefuroxime Axetil 500 Mg. Tab. I.P. [Nrd-591] , Dabigatran 150 Mg Cap [Nrd-594] , Dabigatran 110 Mg Cap [Nrd-595] , Dapagliflozin 10 Mg Tab. [Nrd-599] , Deflazacort 6Mg Tab. [ Nrd-602] , Deflazacort 12 Mg Tab. [Nrd-603] , Diclofenac Sodium 50Mg And Paracetamol 325Mg And Serratiopeptidase 10Mg Tablet [Nrd-605] , Duloxetine Gastro Resistant 20 Mg Tab. I.P. [Nrd-614] , Duloxitine Gastro Resistant30 Mg Tab. I.P. [Nrd-615] , Esomeprazole 40 Mg Tab. I.P. [Nrd-624] , Febuxostat 40 Mg Tab. [ Nrd-632] , Febuxostat 80 Mg Tab. [ Nrd-633] , Fexofenadine 120 Mg Tab. I.P. [Nrd-634] , Furosemide 20Mg And Spironolactone 50Mg Tab. [Nrd-643] , Ivermectin 6Mg Tab. I.P. [Nrd-650] , Ivermectin 12Mg Tab. I.P. [Nrd-651] , Thyroxine/ Levothyroxine Sodium 25 Mcg Tab. I.P [Nrd- 665] , Methylprednisolone 16Mg Tab. I.P. [Nrd- 683] , Methylprednisolone 8Mg Tab. I.P. [Nrd-684] , Montelukast 10 Mg Tab. I.P. [Nrd-694] , Moxifloxacin 400 Mg Tab. B.P. [Nrd-697] , Nicoumalone 1 Mg Tab. I.P. [Nrd-705] , Nicoumalone 4 Mg Tab. I.P. [Nrd-707] , Nitrazepam 5Mg Tab. I.P. [Nrd-714] , Paracetomol 650 Mg Tab . I.P. [Nrd-726] , Propranolol 10Mg Tablet / Capsule [Nrd-751] , Rosuvastatin 10Mg And Fenofibrate 160Mg Tab. I.P. [Nrd-771] , Serratiopeptidase 10Mg Tab. I.P. [Nrd-777] , Tramadol 37.5Mg And Paracetamol 325Mg Tab. [Nrd-802] , Trypsin Chymotripsin Tablet (Each Enteric Coated Tablet Contains 1 Lacks Unit Of Enzymetic Activity) [Nrd-807] , Vildagliptin 50Mg Tab. I.P. [Nrd-812] , Voglibose 0.2 Mg Tab Tab. I.P. [Nrd-813] , Voglibose 0.3 Mg Tab Tab. I.P. [Nrd-814] , Zinc 50Mg Tab. [Nrd- 818] , Tiotropium Inhalation 9Mcg [Nrd-822] , Tetanus Vaccine ( Adsorbed) Ip In 0.5 Ml Inj. [Nrd-824] , Abacavir300 Each Tablet Contain Abacavir 300Mg Ip [Nrd-825] , Lamivudine 100 Each Tablet Contain Lamivudine 100 Mg [ Nrd-826] , Zideovudine 60Mg And Lamivudine 30Mg [Nrd -828] , Triamcinolone Oromucosal Paste Bp 0.1% W/W [Nrd-886] , Glycopegylated Extended Half Life Nonacog Beta Pegol F Ix 500Iu [Nrd-889] , Glycopegylated Extended Half Life Nonacog Beta Pegol F Ix 1000Iu [Nrd-890] , Glycopegylated Extended Half Life Factor Viii 500Iu [Nrd -891] , Glycopegylated Extended Half Life Factor Viii 1000Iu [ Nrd-892] , Entecavir 1Mg Tab./Cap Film Coated [Nrd-894] , Nicotine 2Mg Flavoured Gum/Oral Thin Film/ Ods [Nrd-899] , Nicotine 4Mg Tab [Nrd -900] , Dapagliflozin 5Mg Tablet [Nrd-901] , Chlorthalidone 12.5 Mg Tab [Nrd-902] , Chlorthalidone 25Mg Tablet , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1 /2 Circle Taper Point [Nrr-1] , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3Omm1/2 Circle Taper Point [Nrr-2] , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/ 2 Circle Reverse Cutting [Nrr-3] , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% And Above, Violet 1/2 Circle Taper Point, 17-20Mm Needle, Length 70Cm Size 3-0 [Nrr-16] , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan , Violet 1/2 Circle Taper Point Rb-1, 17 Mm Needle, Length 70Cm Size 4-0 [Nrr-17] , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 1/ 2 Circle Taper Point Rb- 2, Double Needle, 13 Mm Needle, Length 70Cm Size 5-0 [Nrr- 18] , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 3/ 8 Circle Taper Point, Bb Sgle Armed Needle 17 Mm Needle, Length 70Cm Size 5-0 [Nrr- 19] , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6- 0 Rb 17 Mm Needle Length 90 Cm [Nrr- 22] , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6- 0 Rb 11 Mm Needle Length 90 Cm [Nrr- 23] , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5- 0 Rb 11 Mm Needle Length 90 Cm [Nrr- , Absorbable Surgical Suture Sterilized Surgical Single Armed Needled Suture Monofilament Polydiaxanone Violet 5- 0 Rb 17 Mm Needle Length 90 Cm [Nrr- 25] , Non Absorbable Surgical Suture, Sterilized Surical Needled Black Braided Silk With Needle 1/2 Circle Round Bodied 30 Mm Needle , Length 70 Cm Size 2-0 [Nrr-35] , Braided Coated Non Absorbable Suture Usp 1-0 75 Cm X 2 [Nrr-36 ] , Braided Coated Non Absorbable Suture Usp 2-0 75 Cm X 2 [Nrr-37 ] , Braided Coated Non Absorbable Suture Usp 3-0 75 Cm X 2 [Nrr-38 ] , Silk Reel 4-0 [Nrr-39] , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop Or Tab End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Tp [Nrr-65] , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop Or Tab End Made Up With Polyglyconate 2-0 26- 30 Mm 30 Cm 1/2 Circle Taper Point [Nrr -67] , Polyester Ethylene Terephthalate Nonabsorbable Surgical Braided, Sterile, Surgical Suture Composed Of Poly ( Ethylene Terephthalate.) Long-Chain, Linear Polyesters 1 /2 Circle Tapercut 2 X V-5 Double Needle 26 Mm 90 Cm Green Color Size 2-0 [Nrr-73] , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper Point 17 Mm & 32Cm [ Nrr-74] , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Voilet Monofilament 1/2 Circle Taper Point Ct-1 40 Mm Needle 90 Cm Suture Size 1 [Nrr-75] , Nonabsorbable Polypropylene Light Weight Macroporous Mesh. Usfda/Ce Certificate With Nnotified Body [Nrs-1] , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body [Nrs-2] , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body [Nrs-4] , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm. Circular Usfda/Ce Certificate With Notified Body [Nrs-5] , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm.Circular Usfda/Ce Certificate With Notified Body [Nrs-6] , Non Absorbable 5 Mm Hernia Mesh Fixation Device With 30 Helical Shaped Titanium Tacks 3.96 Mm Width And 0.61 Mm Diameter Usfda/Ce Certificate With Notified Body [ Nrs-7] , Light Weight Monofilament Polypropylene Mesh Size Large Left 10.8* 16Cm /15*10 Cm [Nrs- 10] , Light Weight Monofilament Polypropylene Mesh Size Large Right 10.8* 16Cm /15*10 Cm [Nrs- 11] , Light Weight Monofilament Polypropylene Mesh Size Extra Large Left 12.4Cm * 17.3 /16*12 Cm [Nrs-12] , Light Weight Monofilament Polypropylene Mesh Size Extra Large Right 12.4Cm * 17.3/16*12 Cm [Nrs-13] , Linear Cutter 55Mm With Six Rows [Nrs-15 ] , Linear Cutter 75Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/ 1.8Mm/2Mm In One Cartridge Only [Nrs-16 ] , Universal Linear Cutter Cartridge 75Mm Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 75Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only 6 Rows 3-D Staple Technology [Nrs-17] , Universal Linear Cutter Cartridge 55-60 Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 55-60 Mm.Option Of Closed Staple Height Of 1.5Mm /1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology [ Nrs-18] , Curved Cutter Stapler 40 Mm Linear Cutter Or Curved Shaped Radial Stapler Cartridge For Simultaneous Cutting And Stapling [Nrs-19] , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm( Detail In Rc) [Nrs-20] , Circular Stapler 33Mm With Controlled Tissue Compression With Adjustable Staple Hight (1.5-2.2 Mm) For Controlled Tissue Compression Longer Staple Leg 5.2 Mm To 5.5Mm, Non Slip Grip Surface [Nrs-23] , Laparoscopic Cartridge For Stapler 60 Mm Blue, 1.5 Mm [Nrs-24] , Procedure For Prolapse And Hemorrhoids Stapler 33Mm - Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Stapler [Nrs-26] , Optically Guided Bladeless Trocar 12Mm Length 100Mm [Nrs- 28] , Facial Closure Device Contain - Optical Bladeless Trocar With Facial Closure Device Comaptible With Clear Cannula Have Two Side Opening Meant For Uniform Port Closure [ Nrs-29] , Varied Staple Height Reloads/Cartridges For 80 Mm Gia [Nrs-31] , Linear Cutter With Varied Staple Height Tri -Staple Gia 60 Mm [ Nrs-32] , Eea Circular Stapler Purple Colour Medium Thick [Nrs-33] , Linear Cutter With Varied Staple Height Tri -Staple Gia 80 Mm [ Nrs-34] , Disposable Laparoscopic Clip Applier Preloaded With 15/16 Clips, 5Mm Diameter With Clip Logic Technology/Over Load Mechanism And Digital Display/Clip Indicator Titanium Alloy Clips- U Shaped [Nrs- 39] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates - 2 Mm Thickness (2*2 ) Hole [Nrs-57] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates - 2 Mm Thickness (1*2 ) Hole [Nrs-58] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Plates - 2 Mm Thickness (1*1 ) Hole [Nrs-59] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (2 Mm ) [Nrs- 60] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (1.5 Mm ) [Nrs- 61] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (2.5 Mm ) [Nrs- 62] , Platting For Maxillary Swing And Mandibular Fixation Surgeries Screw- (3 Mm ) [Nrs- 63] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) 8 No [ Nrs-98] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) 10 No [ Nrs-99] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) No. 14 [ Nrs-100] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) No. 12 [ Nrs-101] , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter [ Nrs-103] , Central Neck Line Double Lumen (Antimicrobial Coated/ Chlorhexidine , Silver Sulfadiazine Coated) Central Lumen Catheter, Double Lumen) 7 Fr Usfda/Bis With Testing Standard [Nrs-104] , Self-Adherent Moist Wound Foam Dressing Made Up Of Multilayer Matrix With Soft Silicon Adhesive Layer For Pressure Ulcers/Bed Sores At Sacrum 16 Cms X 20 Cms And More [Nrs-149] , Double/Single Wall Resuscitator With Peep Valve In Adult Made Of Silicone Rubber (1300 Ml Or More) Weight Adult (415 G) And More [Nrs-151] , Double Wall Resuscitator With Peep Valve In Paediatrics [ Nrs-152] , Single Patient Use Sebs Resuscitator (With Peep Valve In Neonatal 220- 300Ml) [Nrs-155] , Pre-Formed Sga With Gastric Access & Intubation Sizes ‒ 3 [ Nrs-160] , Pre-Formed Sga With Gastric Access & Intubation Size 4 [Nrs- 161] , Silicone Pre-Formed Sga Size 2 [Nrs-166] , Silicone Pre-Formed Sga Size 3 [Nrs-168] , Silicone Pre-Formed Sga Size 4 [Nrs-169] , Offset Connector Cardio Sensor Electrodes Sizes ‒Adult [Nrs-174] , Disposable Sga Anatomical Curve Size 3 [Nrs-188] , Disposable Sga Anatomical Curve Size 4 [Nrs-189] , Over-The-Ear Nasal Cannula Usfda/Bis With Testing Standard. [Nrs- 196] , Pediatric Nasal Cannula Softech With Universal Oxygen Connector, 7 Cm Star-Lumen Tubing [Nrs-197] , Volumetric Incentive Spirometer (Adult) 4000 Ml And Above With Handle (Detail In Rc) [ Nrs-199] , Volumetric Incentive Spirometer (Pediatric) 2500 Ml With Handle ( Detail In Rc) [Nrs-200] , Adult Conventional Single Water Trap (Non- Heated) [Nrs-207A] , Adult Conventional Single Water Trap ( Heated) [Nrs-207B] , Adult Ventilator Circuit With Universal Single Limb [Nrs-208] , Adult Ventilator Circuit Single Water Trap (Non- Heated) Available In A Variety Of Different Configurations And Styles. All Adult Conventional Circuits With 70-72 Inch. Long, Manufacturer Must Be Us- Fda/ Eu Ce Four Digit Notify/ Iso [Nrs- 209] , Infant Prong Cpap Cannula Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K And Ce Certification. [Nrs-211 ] , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters [Nrs-212] , Tracheostomy Hme [ Nrs-213] , Closed Suction Catheter For Paediatrics 5Fr [ Nrs-255] , Closed Suction Catheter For Paediatrics 6Fr [ Nrs-256] , Closed Suction Catheter For Paediatrics 7Fr [ Nrs-257] , Closed Suction Catheter For Paediatrics Number And Color Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors For Different Tubes In The Pack. Catheter Is Made By Medical Grade Silicon/ Poly Urethane Material. Sizes 8Fr. [ Nrs-258] , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations Made Of Medical Grade Silicon/ Poly Urethane Material. Sizes Are 10Fr (Detail In Rc) [Nrs-259] , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 12Fr ( Detail In Rc) [Nrs-260] , Paediatric Endotracheal Tube Size 3Mm [Nrs- 261] , Paediatric Endotracheal Tube Size 3.5Mm [Nrs- 262] , Paediatric Endotracheal Tube Size 5.5Mm [Nrs- 263] , Catheter Mount Double Swivel Connector With Bronchoscopy Port Approved By Us Fda [ Nrs-269] , Anti Microbial Gloves 6 Inches [Nrs-308.A] , Anti Microbial Gloves 6.5 Inches [Nrs-308.B] , Anti Microbial Gloves 7 Inches [Nrs-308.C] , Anti Microbial Gloves 7.5 Inches [Nrs-308.D] , Anti Microbial Gloves 8 Inches [Nrs-308.E] , Anterior Chamber Iol Pmma Material Single Piece Kelman Multiflex Design 5-6 Mm Optic Size With 12-13Mm Overall Size Biconvex Power Range 12 To 24 [Nrs- 309] , Neonatal High Flow Nasal Cannula Having 8 Litre Flow With Soft Tip [ Nrs-326] , Silicone Foleys Catheter Size 12 Fr,2-Way With Three Noble Metal Alloy Coating Consisting Of Gold, Silver And Palladium [Nrs-537] , Silicone Foleys Catheter Size-14 Fr,2-Way With Three Noble Metal Alloy Coating Consisting Of Gold, Silver And Palladium [Nrs-538] , Silicone Foleys Catheter Size-16 Fr ,2-Way With Three Noble Metal Alloy Coating Consisting Of Gold, Silver And Palladium (Coated Internally And Externally Surfaces) [Nrs-539] , Silicone Foleys Catheter (18Fr, 2-Way) 100% Medical-Grade Silicone. Radiopaque Stripe Throughout The Catheter Length For X- Ray Visibility. Standard (Rounded) Tip. Color- Coded System To Identify French Sizes [Nrs-540] , Double Lumen Catheter With Kit Internal Juglar/ Straight (Madeup Of Flexible Radiopaque Polyurethane With Tip, Easy Visualization In X- Ray. Accessory Should Be Provided Like Catheter ,Dialator , Introducer, Needle 18 G, Size- 12 Frx16 Cm [Nrs-552] , Double Lumen Catheter With Kit Internal Juglar/ Straight Madeup Of Flexible Radiopaque Polyurethane With Tip, Needle 18G, Size- 12 Frx13 Cm (Detail In Rc) [Nrs-553] , Long Term Double Lumen Dialysis Catheter With Kit Accessories, Symmetrical Tip Retrograde And Antigrade Size-15 Frx27 Cm (Detail In Rc) [Nrs-555] , Long Term Double Lumen Dialysis Catheter With Kit Retrograde And Antigrade Long Term Double Lumen Dialysis Catheter Size- 15 Fr X 19 Cm [ Nrs-556] , Long Term Double Lumen Dialysis Catheter With Kit Retrograde And Antigrade Long Term Double Lumen Dialysis Catheter Size 15 Fr X 23 Cm [Nrs -557] , Transperant Surgical Wound Dressing Size- 5Cm X 5.72Cm [Nrs- 558] , Transperant Surgical Wound Dressing Size- 10X15 [Nrs-559] , Multi-Vent Mask Pediatric,Air Entrainment Masks, Each Mask Includes Color-Coded Diluters Green For Low Concentration, White For Medium Concentration. Locking Ring. Complete Kit With 7-Ft Oxygen Tubing (Detail In Rc) [ Nrs-564] , Central Line With Triple Lumen With Y Needle With Syringe And Guide Wire 7Fr To 8.5Fr With 15 Cm To 20 Cm Catheter With Tecoflex/ Polyurathane Material With Usfda Approved. [ Nrs-593] , Nasal Haemostatic Sponge Pack With Out Airway 8Cm [Nrs-686] , Nasal Haemostatic Sponge Pack With Out Airway 10Cm [Nrs-687 ] , Nasal Haemostatic Sponge Pack (With Airway) 8Cm [Nrs-688 ] , Dialyzer Size 1.3 Sqm With Blood Tubing Set. Dialyzer Should Be Synthetic Membrane ( Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Of The Same Company [Nrs- 732] , Dialyzer Size 1.4 Sqm With Blood Tubing Set. Dialyzer Should Be Synthetic Membrane ( Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Of The Same Company [Nrs- 733] , Dialyzer Size 1.6 Sqm With Blood Tubing Set. Dialyzer Should Be Synthetic Membrane ( Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Of The Same Company [Nrs- 734] , Dialyzer Size 1.8 Sqm With Blood Tubing Set. Dialyzer Should Be Synthetic Membrane ( Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Of The Same Company [Nrs- 735] , Padiatric Dialyzer Size 0.6 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/ Polyethersulfon) With 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector [Nrs-736] , Padiatric Dialyzer Size 0.8 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/ Polyethersulfon) With 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector [Nrs-737] , Miscellaneous Drugs , Alendronate Sodium Tablets Usp / Bp 35 Mg , Amphotericin B Inj Ip 50 Mg , Aztreonam Injection 1Gm , Aztreonam Injection Usp 500 Mg , Bromocriptine Tablets Ip 2.5 Mg , Cetrizine,Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg,Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg,Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg,Menthol 0.5 Mg, Syrup Q.S. (50Ml.) , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml (30 Ml.) , Diagnostic Sticks For Multiple Use Strip (Sugar, Ketone, Albumin) , Gadodiamide Inj. 0.5Mml/Ml Vial , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose (Monohydrate) 75 Mg , Mannitol With Glycerin Injection 10 O/O + 10 O/O W/V (For Intravenous Infusion) , Mefloquine Tablets Ip 250 Mg , Mitomycine Injection Ip 10 Mg/Mitomycine For Injection Usp 10 Mg , Neostigmine Tab Ip 15 Mg , Octreotide Injection 50 Mcg/Ml , Amino Acid Inj 200 Ml , Black Googles , Bleeching Powder Bags 25 Kg , Blood Collection Bags 350 Ml , Botroclot Lotion , Cannula Fixer , Carbolic Acid Crystalline , Cefipime Inj 1Gm , Cefuroxime 250 Mg Inj , Cefuroxime 500 Mg Inj , Compound Sodium In Glass 500 Ml , Corneal Scissor Curved , Cotton Bandage 3 Inch[Lp.25]-[M] , Cotton Bandage 4 Inch[Lp.6]-[St] , Cotton Bandage 6 Inch[Lp.7]-[St] , Cough Syp (Seddative Formula) , Crescent Blade , Crescent Sics Blade , Cup Googles , Disposable Needle No. 23[Lp.2]-[St] , Disposable Needle No. 24[Lp.3]-[St] , Disposable Needle No. 26[Lp.4]-[St] , Disposable Needle No.22[Lp.1]-[St] , Ecoshield Solution For Ulv-Fogger Maschine , Elastoplast 10Cmx1Mt , Elastoplast 10Cmx2/3Mt , Enzyme Drops 100 Ml , Esmolol 10 Ml Inj , Ethamsylate Tab 250 Mg , Fexofenadine Syp , Gauze Than[Lp.5]-[St] ( 120 Cm X 9 Mtr.) Claim 108 Cmx8.10 Mtr. , Haemaccel Inj , Hand Sanitizer Solution , Hepatiti Vaccine 1 Ml , Hmt Inj , Hydrodisection Cannula , Irrigation Cannula G20,22,22 , Keratone 2.8Mm Sics Blades Inj , Keratone Blades For Eye , Lense Dialer , Limbs Forceps , Mephentermine Inj 1 Ml , Mephentermine Inj 10 Ml , Microscope Bulb /Blade , Moxifloxacin & Dexamethasone Eye Drops , Moxifloxacin Eye Drops , Neotach Inj , Pampers(Sanitary Pads For Kids) , Pilocarpine Sulphate Inj , Plastic Apron , Plastic Bags ( Biogradable 0, Minimum 50 Micron Size( Black,Red, Blue, Yellow) , Refractive Spectacals , Side Port , Silk Suture 10-0 With Needle , Simco Cannula 22 G , Simco Cannula 22 G , Skin Traction Kit (Adult) Sponge , Skin Traction Kit (Kid) Sponge , Snitary Napkins Handloom , Sodium Hypochloride Solution 5 Litre , Sterile Disposable Spinal Needle For Single Use. 23G X 3 1/2 Inch , Sterle Catheter K-90 , Sterle Catheter K-91 , Swab Stick(Buds) , Trypan Blue Dye , Tst Sterilzer Strips (For Bowie & Dick Test) , Vitamin B Complex Syp , Xylocard 2% Inj , Zinc Sulphate Drops , Puncture Proof Box , Three Bucket System , Bins 30 Ltr , Bins 40 Ltr , Bins 50 Ltr , Bins With Paddle 30 Ltr , Bins With Paddle 40 Ltr , Bins With Paddle 50 Ltr , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 30 Mm Length 76 Cm) Size-2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic Size-3/0 (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 1/0 1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 2/0 1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 1 1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 3/0 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 (1/2 Circle Reverse Cutting 50 Mm Length 90Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1/0(1/2 Circle Rb 30Mm Needle,Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2/0 (1/2 Circle Rb 31Mm Needle, Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)1/2 Cir Rb Needle Size-1/0 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size - 3/0 1/2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1 1/2 Cir Rb Needle40Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1/0(1/2 Cir Rb Needle 40Mm Length 90 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-4/0 (1/2 Cir Rb Needle 20Mm Length 70 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 3/0 3/8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture (Synthetic)Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 3/0 3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 1 1/2 Cir Tapercut Needle (Heavy) 40Mm Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial Coated Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial With Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1/0 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-3/0(1/2 Cir Conventional 25Mm Length 90 Cm)Undyed , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-4/0 3/8 Circle Cutting 16Mm Needle,Suture Length 70Cm , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate,Size 3/0 (1/2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 3/0 (3/8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 4/0 (1/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) , Absorbable Surgical Sutures,Sterilised Needled Polyglecaprone/Polyglyconate,Monofilament Sutures Size 2/0 (1/2 Circle Oval Rb Needle 26Mm Needle,Suture Length Of 70Cm) , Absorbent Cotton Wool Ip 500 Gm , Corrugated Drainage Sheet - All Sizes(Details In Rc) , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2/0 1/2 Circle Taper Cut,17Mm Double Armed Needle,Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2-0 1/2 Circle Taper Cut,25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2/0(3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(1/2 Cir Rb Needle 20Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With Size 3/0 1/2 Circle Tapercut Double Needle 25Mm,Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1(1/2 Cir Rb Heavy Needle 45Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1/0(1/2 Cir Rb Needle 30Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Cir Rb Needle 30Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0(1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0(3/8 Cir Cutting Needle 25Mm Length 45 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Cir Tapercut Double Needle 17Mm Length 70 Cm)(Detail In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Circle Tapercut 13Mm Double Needle 70Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb Double Needle 17Mm Length 90 Cm)(Detail In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(3/8Cir Rb 16 Mm Needle, Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 10/0 (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 8/0 (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 1/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 2/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 3/0 (3/8 Conventional Cutting Needle 16Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 4/0 (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2/0 (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/ Blue Size 4/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/Blue Size 2/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm)(Detail In Rc) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 4/0(1/2 Cir Rb Needle 16 Mm Length 70 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 5/0 (1/2 Circle Cement Concrete 13Mm Needle, Suture Length Of 70Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8Cir Rb Taper Point Double Needle 9.3Mmlength 60 Cm)/(3/8Cir Rb 16 Mm Needle,Length 90 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 7/0 (3/8Cir Rb Double 8Mm Needle, Length 60 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 8/0 (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) , Non Absorbable Surgical Suture,Sterilised Needled Polyamide Monofilament Black (Nylon)Size 5/0(3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) , Sanitary Napkin Beltless With Wings (Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 11-15(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 1-5(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 16-20(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 6-10(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Cutting Size 6-10(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Size 11-15(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Size 16-20(Details In Rc) , Suture Needles Curved And Cutting Size 1-5(Details In Rc) , Syringe 50 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Temporary Cardiac Pacing Wire (Electrode) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- (Details In Rc) , Scissors (Large) , Bone Ronger , Bone Curette , Bone Chiesal , Tissue Forecep , Explorer , Cement Spatula , Amalgum Carrier , Amalgum Condenser , Composite Material , Instrument Sterilizer , Stericlav 15 Ltr , Dental Opd , Composite Filling Instrument (Api) , Elevators (Api) , Cryer (Api) , Straight (Api) , Grooved (Api) , Tooth Extraction Forceps Kit Upper , Tooth Extraction Forceps Kit Lower , Luxators , Mouth Mirror , Probe , Twizzer , Third Molar Forcep Upper , Third Molar Forcep Lower , Gic Filling Instrument (Api) , Diamond Bur Ball Round (Mani) , Diamond Bur Straight (Mani) , Diamond Bur Taper Fissure (Mani) , Diamond Bur Inverted Cone (Mani) , Diamond Bur Ocelusal Reduction Bur (Mani) , Carbide Bur Round (Mani) , Carbide Bur Straight Fissure(Mani) , Bone Cutting Bur (Mani) , Chisel Unibevol (Api) , Mallet (Teflon Coated) (Api) , Periosteal Elevator (Api) , Bone File (Api) , Artery Forecep , Niddle Holder , Scissors (Small) , Monns Probe , Surgical Curette , Gic Filling Material (Gc9) (Gc) , Root Canal Selant (Zno Base) (Amdent) , Endodontick File (15-40) 21 Mm (Mani) , Endodontick File (15-40) 25 Mm (Mani) , Endodontick File (45-80) 28 Mm , G.P Point 2% (15-40) (Densply) , G.P Point 2% (45-80) (Densply) , Zinc Oxide Powder (100 Gm) , Eugenol 100 Ml , Calcium Hydroxide Paste 2 Gm , Edta Paste 2 Gm , B.P Knife Handle , Iodoform 50 Gm. , Silver Alloy 30 Gm. , Mercury 30 Gm.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
5.
Housing Urban and Rular Development #9786076 Price Bid
Tender For Mow/Deposit Work Under Jail-3 Sub Dn, Pwd Bhopal-1 1.2 Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. 1.2.1 Lime, moorum, building rubbish 1.2.2 Earth 1.2.3 Manure or sludge 1.2.4 Excavated rock 1.2.5 Sand, stone aggregate below 40mm nominal size 1.2.6 Stone aggregate 40mm nominal size and above 1.2.7 Stone soling 1.2.8 Bricks 1.2.9 S.W. Pipes 1.2.9.1 100 mm dia 1.2.9.2 150 mm dia 1.2.9.3 200 mm dia 1.2.9.4 250 mm dia 1.2.9.5 300 mm dia 1.2.9.6 350 mm dia 1.2.9.7 400 mm dia 1.2.9.8 450 mm dia 1.2.9.9 500 mm dia 1.2.9.10 600 mm dia 1.2.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 1.2.10.1 100 mm dia 1.2.10.2 125 mm dia 1.2.10.3 150 mm dia 1.2.10.4 200 mm dia 1.2.10.5 250 mm dia 1.2.10.6 300 mm dia 1.2.10.7 350 mm dia 1.2.10.8 400 mm dia 1.2.10.9 450 and 500 mm dia 1.2.10.10 600, 700, 750 and 800 mm dia 2 1.3 Add extra for every additional lead of 50 metre or part thereof. 1.3.1 Lime, moorum, building rubbish 1.3.2 Earth 1.3.3 Manure or sludge 1.3.4 Excavated rock 1.3.5 Sand, stone aggregate below 40mm nominal size 1.3.6 Stone aggregate 40mm nominal size and above 1.3.7 Stone soling 1.3.8 Bricks 1.3.9 S.W. Pipes 1.3.9.1 100 mm dia 1.3.9.2 150 mm dia 1.3.9.3 200 mm dia 1.3.9.4 250 mm dia 1.3.9.5 300 mm dia 1.3.9.6 350 mm dia 1.3.9.7 400 mm dia 1.3.9.8 450 mm dia 1.3.9.9 500 mm dia 1.3.9.10 600 mm dia 1.3.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 1.3.10.1 100 mm dia 1.3.10.2 125 mm dia 1.3.10.3 150 mm dia 1.3.10.4 200 mm dia 1.3.10.5 250 mm dia 1.3.10.6 300 mm dia 1.3.10.7 350 mm dia 1.3.10.8 400 mm dia 1.3.10.9 450 and 500 mm dia 1.3.10.10 600, 700, 750 and 800 mm dia 3 2.1 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. 2 2.2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 5 2.3 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 6 2.4 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.4.1 beyond 30 cm girth up to and including 60 cm girth 2.4.2 beyond 60 cm girth up to and including 120 cm girth 2.4.3 beyond 120 cm girth up to and including 240 cm girth 2.4.4 above 240 cm girth 7 2.5 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil 8 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil 9 2.7 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.7.1 Ordinary rock 2.7.2 Hard rock (requiring blasting) 2.7.3 Hard rock (blasting prohibited) 10 2.8 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day 2.8.1 Ordinary rock 2.8.2 Hard rock (requiring blasting) 2.8.3 Hard rock (blasting prohibited) 11 2.9 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil 2.9.1 Pipes, cables etc., not exceeding 80 mm dia. 2.9.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.9.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. 12 2.10 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). 13 2.11 Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 14 2.12 Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : 2.12.1 Ordinary rock : 2.12.1.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 2.12.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia 2.12.2 Hard rock (requiring blasting) 2.12.2.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia 2.12.3 Hard rock (blasting prohibited) 2.12.3.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.3.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. 15 2.13 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 16 2.14 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 17 2.15 Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). 2.15.1 Depth not exceeding 1.5 m. 2.15.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.15.3 Depth exceeding 3 m but not exceeding 4.5 m. 18 2.16 Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). 2.16.1 Depth not exceeding 1.5 m. 2.16.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.16.3 Depth exceeding 3 m but not exceeding 4.5 m. 19 2.17 Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : 2.17.1 Depth not exceeding 1.5 m. 2.17.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.17.3 Depth exceeding 3 m but not exceeding 4.5 m. 20 2.18 Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). 21 2.23 Extra rates for quantities of works, executed: 2.23.1 In or under water and/or liquid mud, including pumping out water as required. 2.23.2 In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. 22 2.24 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 23 2.25 Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) 2.25.1 All kinds of soil. 2.25.2 Ordinary or hard rock. 24 2.26 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. 25 2.27 Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. 26 2.28 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. 2.28.1 All kinds of soil. 2.28.2 Ordinary rock 2.28.3 Hard rock (requiring blasting) 2.28.4 Hard rock (blasting prohibited) 27 2.29 Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) 28 2.30 Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.30.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. 29 2.31 Deduct for disposed soil not levelled and neatly dressed. 30 2.32 Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. 31 2.33 Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). 32 2.34 Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. 33 2.35 Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. 34 2.36 Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. 35 2.37 Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. 36 2.38 Deduct for not watering with the excavated earth for bankingfilling 37 2.39 Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. 2.39.1 Permanent piping system with Junction boxes 2.39.2 Anti-termite chemical injected area 38 2.40 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) 39 3.1 Cement mortar 1:1 (1 cement: 1 sand) 40 3.2 Cement mortar 1:2 (1 cement: 2 sand). 41 3.3 Cement mortar 1:3 (1 cement: 3 sand). 42 3.4 Cement mortar 1:4 (1 cement: 4 sand). 43 3.5 Cement mortar 1:5 (1 cement: 5 sand). 44 3.6 Cement mortar 1:6 (1 cement: 6 sand). 45 3.7 Cement mortar 1:2 (1 cement: 2 stone dust). 46 3.8 Cement mortar 1:2 (1 cement: 2 marble dust). 47 3.9 White cement mortar 1:2 (1 white cement: 2 marble dust). 48 3.10 Cement mortar 1:5 (1 cement: 5 marble dust). 49 3.11 White cement mortar 1:3 (1 white cement: 3 marble dust). 50 3.12 White cement mortar 1:5 (1 white cement: 5 marble dust). 51 3.13 Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 52 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete 4.1.1.2 M-20 – Grade concrete 4.1.1.3 M-15 – Grade concrete 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 4.1.3 With fly ash. 4.1.3.1 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 4.1.3.2 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. 53 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete 4.2.1.2 M 20 – Grade concrete 4.2.1.3 M 15 – Grade concrete 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 54 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. 4.3.3 Above plinth: Columns, pillars, posts and struts. 55 4.4 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . 4.4.1 M-15 (With 20mm nominal size graded stone aggregate) 4.4.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 56 4.5 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) 57 4.6 Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 58 4.7 Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : 4.7.1 M-15 (With 20mm nominal size graded stone aggregate) 4.7.2 M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 59 4.8 Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. 4.8.1 M-15 (With 20mm nominal size graded stone aggregate) 4.8.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 60 4.9 Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of 61 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). 62 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). 63 4.12 Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. 64 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 65 4.14 Extra for concrete work in superstructure above floor two level for each floors or part thereof 66 4.15 Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. 67 4.16 Extra for laying concrete in or under foul positions. 68 4.17 Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) 69 4.18 Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. 70 4.19 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. 71 4.20 Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 72 4.21 Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 73 4.22 Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 74 4.23 Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. 4.23.1 All works up to plinth level: 4.23.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.23.2 All works above plinth and upto floor two level 4.23.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 75 4.24 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. 4.24.1 All works up to plinth level: 4.24.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.24.2 All works above plinth and upto floor two level 4.24.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 76 4.25 Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. 77 4.26 Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering 78 5.1 Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 M-20 Grade Concrete 5.1.2 M-15 Grade Concrete 79 5.2 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: 5.2.1 M-20 Grade Concrete 80 5.3 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. 5.3.1 M-20 Grade Concrete 81 5.4 Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. 5.4.1 M-20 Grade Concrete 82 5.5 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. 5.5.1 M-20 Grade Concrete 83 5.6 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with 5.6.1 M-20 Grade Concrete 88 5.7 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with 5.7.1 M-20 Grade Concrete 84 5.8 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete 85 5.9 Centering and shuttering in cluding strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. 5.9.2.2 Above plinth upto 3.6 m height from plinth level 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. 5.9.3 Suspended floors, roofs, landings, balconies and access platform. 5.9.4 Shelves(Cast in situ) 5.9.5 Lintels, beams, girders, bressumers and cantilevers 5.9.6 Columns, P i l l a r s , Piers, Abutments, Posts and Struts. 5.9.7 Stairs, (excluding landings) except spiral- Staircases. 5.9.8 Spiral staircases (including landing). 5.9.9 Arches, domes,vaults upto 6m span 5.9.10 Extra for arches, domes, vaults exceeding 6 m span 5.9.11 Chimneys and shafts 5.9.12 Coffer/waffle slab of any size or shape as shown in the drawing. 5.9.13 Well steining 5.9.14 Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. 5.9.15 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). 5.9.16 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. 5.9.17 Cornices and mouldings 5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. 5.9.19 Weather shade, Chajjas, corbels etc., including Edges. 5.9.20 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) 5.9.21 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) 86 5.10 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). 87 5.11 Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. 88 5.12 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 5.12.1 50 mm thick 5.12.2 40 mm thick 5.12.3 25 mm thick 89 5.13 Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. 80 5.14 Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. 91 5.15 Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. 92 5.16 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) 5.16.1 Mild steel and Medium Tensile steel bars. 5.16.2 Hard drawn steel wire 5.16.3 Cold twisted bars (CTD) 5.16.4 Hot rolled deformed bars 5.16.5 Hard drawn steel wire fabric 5.16.6 Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 93 5.17 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. 94 5.18 Providing and fixing in position copper plate as per design for expansion joints. 95 5.19 Providing and filling in position, blown bitumen in expansion joints. 96 5.20 Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. 97 5.21 Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. 98 5.22 Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 5. 22.1 12 mm thick 5. 22.2 25 mm thick 5. 22.3 50 mm thick 99 5.23 Providing and fixing sheet covering over expansion joints with iron screws as per design. 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. 5. 23.1.2 200mm wide. 5. 23.1.3 250mm wide. 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. 5. 23.2.2 200 mm wide. 5. 23.2.3 250 mm wide. 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. 5. 23.3.2 200 mm wide. 5. 23.3.3 250 mm wide. 100 5.24 Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 101 5.25 Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition 102 5.26 Extra for laying reinforced cement concrete in or under foul positions. 103 5.27 Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. 5.27.1 All works upto plinth level. 5.27.2 All works above plinth level and upto floor five level. 5.27.3 Add extra for each floor for all works above floor five level. 104 5.28 Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) 5. 28.1 Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) 5. 28.2 Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) 5. 28.3 Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) 5. 28.4 Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) 105 5.29 Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. 106 5.30 Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) 5.30.1 All works upto plinth level. 5.30.2 All works above plinth level and upto floor V level. 5.30.3 Extra for each additional floor for all works above floor five level 107 5.31 Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) 108 5.32 Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. 5.32.1 Non pigmented wet curing compound 5.32.2 Pigmented wet curing compound. 109 5.33 Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. 5. 33.1. Frame 125 mmx 60 mm (double rebate) 5. 33.2. Frame 100mmx 60 mm (Single rebate) 5. 33.3 Frame 85mmx 60 mm (Single rebate) 110 5.34 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). 111 5.35 Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 5. 35.1 12 mm thick 5. 35.2 25 mm thick. 5. 35.3 50 mm thick. 112 5.36 Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. 113 5.37 Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 5.37.1 150mm wide 5.37.2 200mm wide 5.37.3 250mm wide 114 5.38 Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. 115 5.39 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). 5. 39.1 Floor Joint of 100 mm gap 5. 39.2 Floor Joint of 150 mm gap 5. 39.3 Floor Joint of 200 mm gap 116 5.40 Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 5. 40.1 Wall Joint of 100 mm gap 5. 40.2 Wall Joint of 150 mm gap 5. 40.3 Wall Joint of 200 mm gap 117 5.41 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) 5.41.1 Roof Joint for 100 mm gap 5.41.2 Roof Joint for 150 mm gap 5.41.3 Roof Joint for 200 mm gap 118 5.42 Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) 119 6.1 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) 120 6.2 Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) 121 6.3 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). 122 6.4 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). 123 6.5 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). 124 6.6 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) 125 6.7 Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) 126 6.8 Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) 127 6.9 Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) 128 6.10 Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). 129 6.11 Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. 130 6.12 Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) 131 6.13 Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) 132 6.14 Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) 133 6.15 Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) 134 6.16 Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. 135 6.17 Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. 136 6.18 Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). 137 6.19 Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design 138 6.20 Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). 139 6.21 Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% 140 6.22 Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. 141 6.23 Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 142 6.24 Extra for laying brick work in or under foul position. 143 6.25 Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. 144 6.26 Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. 6.26.1 AAC Masonry in polymer modified mortar 145 6.27 Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof 146 6.28 Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. 147 6.29 Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. 148 6.30 Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. 149 6.32 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) 6.32.1 From ground level upto plinth level 6.32.2 Above plinth level upto floor II level 150 6.33 Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) 6.33.1 From ground level upto plinth level 6.33.2 Above plinth level upto floor II level 151 6.34 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 152 6.35 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. 153 7.1 Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 sand) 154 7.2 Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1cement: 6 sand). 155 7.3 Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof 156 7.4 Extra for random rubble masonry with hard stone in : 7.4.1 Square or rectangular pillars 7.4.2 Circular pillars. 157 7.5 Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. 158 7.6 Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. 7.6.1 Cement mortar 1:6 (1 cement : 6 sand) 7.6.2 Cement mortar 1:6 (1 cement : 6 sand) 159 7.7 Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. 7.7.1 Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) 7.7.2 Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) 160 7.8 Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof 161 7.9 Extra for coursed rubble masonry with hard stone (first or second sort) in : 7.9.1 Square or rectangular pillars 7.9.2 Circular pillars. 7.9.3 Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. 162 7.10 Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : 7.10.1 One face dressed. 7.10.1.1 Red sand stone 7.10.1.2 White sand stone 7.10.2 Both face dressed. 7.10.2.1 Red sand stone. 7.11.2.2 White sand stone 163 7.11 Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.11.1 One face dressed. 7.11.1.1 Red sand stone 7.11.1.2 White sand stone 7.11.2 Both face dressed. 7.11.2.1 Red sand stone. 7.11.2.2 White sand stone 164 7.12 Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.12.1 One face dressed 7.12.1.1 Red sand stone 7.12.1.2 White sand stone 7.12.2 Both face dressed. 7.12.2.1 Red sand stone. 7.12.2.2 White sand stone. 165 7.13 Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.13.1 Red sand stone one face punched. 7.13.2 Red sand stone both face punched 7.13.3 White sand stone one face punched. 7.13.4 White sand stone double face punched 166 7.14 Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. 167 7.15 Extra for plain ashlar or ashlar punched in : 7.15.1 Square or rectangular pillars 168 7.16 Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. 169 7.17 Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). 170 7.18 Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : 7.18.1 Red sand stone 7.18.2 White sand stone 171 7.19 Extra for stone work sunk or moulded or sunk and moulded or carved in : 7.19.1 Triangular or Square or rectangular pillars 7.19.2 Circular or polygonal pillars 172 7.20 Extra for stone work sunk or moulded in cornices. 173 7.21 Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): 7.21.1 Red sand stone - exposed face fine dressed with rough backing. 7.21.1.1 70 mm thick. 7.21.1.2 60 mm thick. 7.21.1.3 50 mm thick 7.21.1.4 40 mm thick. 7.21.1.5 30 mm thick. 7.21.2 Red sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.2.1 70 mm thick. 7.21.2.2 60 mm thick. 7.21.2.3 50 mm thick 7.21.2.4 40 mm thick. 7.21.2.5 30 mm thick. 7.21.3 White sand stone - exposed face fine dressed with rough backing. 7.21.3.1 70 mm thick. 7.21.3.2 60 mm thick. 7.21.3.3 50 mm thick 7.21.3.4 40 mm thick. 7.21.3.5 30 mm thick. 7.21.4 White sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.4.1 70 mm thick. 7.21.4.2 60 mm thick. 7.21.4.3 50 mm thick 7.21.4.4 40 mm thick. 7.21.4.5 30 mm thick. 174 7.22 Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. 175 7.23 Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. 176 7.24 Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases 177 7.25 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. 178 7.26 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: 7.26.1 Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 7.26.2 White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 179 7.27 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: 7.27.1 Red sand stone 7.27.2 White sand stone 180 7.28 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. 181 7.29 Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. 182 7.30 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.30.1 Red sand stone 7.30.2 White sand stone 183 7.31 Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. 7.31.1 Red sand stone 7.31.2 White sand stone 184 7.32 Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 185 7.33 Extra for laying stone work in or under foul position. 186 7.34 Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. 187 7.35 Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 7.35.1 25mm thick Kota stone slabs exposed face dressed and rubbed. 7.35.2 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 7.35.3 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 7.35.4 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. 188 7.36 Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.36.1 Granite stone of any colour and shade 7.36.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble 189 7.37 Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 190 7.38 Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) 7.38.1 Red sand stone. 7.38.2 White sand stone 191 7.39 Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) 192 7.40 Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame 193 8.1 Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). 194 8.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary 195 8.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. 196 8.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. 197 8.5 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. 198 8.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 199 8.7 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 8.7.1 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 8.7.2 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 8.7.3 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 200 8.8 Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., 201 8.9 Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. 202 8.10 Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. 203 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood 9.1.2 Sal wood 9.1.3 Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) 9.1.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 9.1.4.1 Frame of size 100mmX60mm single or double rebate 9.1.4.2 Frame of size 120mmX60mm double rebate. 205 9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). 206 9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) 9.3.1 Sal wood 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 207 9.4 Extra for additional labour wood work in circular shape, such as in frames of fan light : 9.4.1 Second class teak wood 9.4.2 Sal wood 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 208 9.5 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters 9.5.1.2 30 mm thick shutters 9.5.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.5.2.1 35 mm thick shutters 9.5.2.2 30 mm thick shutters 9.5.3 Kiln seasoned selected planks of sheesham wood. 9.5.3.1 35 mm thick shutters 9.5.3.2 30 mm thick shutters 9.5.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 9.5.4.1 35 mm thick 9.5.4.2 30 mm thick 209 9.6 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: 9.6.1 Second class teak wood 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum 210 9.7 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 9.7.1 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 9.7.2 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 9.7.3 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: 211 9.8 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 9.8.1 Second class teak wood 9.8.1.1 35 mm thick 9.8.1.2 30 mm thick 9.8.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.8.2.1 35 mm thick 9.8.2.2 30 mm thick 9.8.3 Kiln seasoned selected planks of sheesham wood. 9.8.3.1 35 mm thick 9.8.3.2 30 mm thick 9.8.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 9. 8.4.1 30 mm thick shutters 9. 8.4.2 35 mm thick shutters 212 9.9 Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. 213 9.10 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 9.10.1 5 mm thick instead of 4 mm thick. 9.10.2 10 to 12 mm float glass 9.10.3 5.5 mm safety glass 9.10.4 10-12mm safety glass 214 9.11 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 215 9.12 Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). 216 9.13 Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). 217 9.14 Deduct for not providing hinges in doors, windows or clerestory window shutters with : 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. 218 9.15 Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 9.15.2. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 219 9.16 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 9.16.1 12 mm thick 9.16.2 18 mm thick 220 9.17 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 9.17.1 18 mm thick 9.17.2 25 mm thick 221 9.18 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. 222 9.19 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 223 9.20 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. 224 9.21 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 225 9.22 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.22.1 Rectangular or square. 9.22.2 Circular. 226 9.23 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). 227 9.24 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 228 9.25 Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.1.3 Kiln seasoned selected class of sheesham wood. 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.2.3 Kiln seasoned selected class of sheesham wood. 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.3.3 Kiln seasoned selected class of sheesham wood. 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.4.3 Kiln seasoned selected class of sheesham wood. 229 9.26 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 9.26.1 35 mm thick shutters 9.26.2 30 mm thick shutters 230 9.27 Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. 231 9.28 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 9.28.1 25 mm long 9.28.2 32 mm long 9.28.3 40 mm long 9.28.4 50 mm long 9.28.5 60 mm long 232 9.29 Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 9.29.1 40 mm thick. 9.29.2 25 mm thick. 9.29.3 20 mm thick 9.29.4 12 mm thick 233 9.30 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 9.30.1 12 mm thick 9.30.2 18 mm thick 9.30.3 25 mm thick 234 9.31 Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 235 9.32 Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. 236 9.33 Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. 237 9.34 Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 9.34.1 18 mm thick 9.34.2 25 mm thick 238 9.35 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 9.35.1 2nd class teak wood 9.35.1.1 50x12 mm 9.35.1.2 50 x 20 mm 9.35.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.35.2.1 50x12 mm 9.35.2.2 50x20 mm 239 9.36 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. 240 9.37 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 241 9.38 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 242 9.39 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. 9.39.1 Non decorative veneer on both sides. 9.39.2 Particle board with decorative veneering on both sides. 243 9.40 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. 244 9.41 Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 9.41.1 12 mm dia. 9.41.2 20 mm dia. 9.41.3 25 mm dia. 245 9.42 Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 9.42.1 20 mm dia (heavy type) 9.42.2 25 mm dia (heavy type) 246 9.43 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.43.1 Fixed to steel windows by welding. 9.43.2 Fixed to openings /wooden frames with rawl plugs screws etc. 247 9.44 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. 248 9.45 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. 249 9.46 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. 9.46.1 With 2nd class teak wood beading 62x19 mm. 9.46.2 With 12 mm mild steel U beading. 250 9.47 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. 251 9.48 Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) 252 9.49 Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : 9.49.1 Sal wood. 9.49.2 Haldu, Kail, Bija wood. 253 9.50 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 9.50.1 125x65x2.12 mm 9.50.2 100x58x1.90 mm 9.50.3 75x47x1.70 mm 9.50.4 50x37x1.50 mm 254 9.51 Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 9.51.1 125x90x4.00 mm 9.51.2 100x75x3.50 mm 9.51.3 75x60x3.10 mm 9.51.4 50x40x2.50 mm 255 9.52 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 9.52.1 125x65x2.12 mm 9.52.2 100x58x1.90 mm 9.52.3 75x47x1.70 mm 9.52.4 50x37x1.50 mm 256 9.53 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 9.53.1 150x125x27x2.80 mm 9.53.2 125x125x27x2.80 mm 9.53.3 100x125x27x2.80 mm 9.53.4 75x100x20x2.24 mm 257 9.54 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 9.54.1 150 mm 9.54.2 125 mm 9.54.3 100 mm 258 9.55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 9.55.1 150 mm 9.55.2 125 mm 9.55.3 100 mm 259 9.56 Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. 9.56.1 Overall width 35 mm. 9.56.2 Overall width 50 mm. 9.56.3 Overall width 65 mm. 260 9.57 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 9.57.1 300x16 mm 9.57.2 250x16 mm 261 9.58 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.58.1 250x10 mm 9.58.2 200x10 mm 9.58.3 150x10 mm 9.58.4 100x10 mm 262 9.59 Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete 263 9.60 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 9.60.1 300x20x6 mm 9.60.2 250x20x6 mm 264 9.61 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 9.61.1 125 mm 9.61.2 100 mm 9.61.3 75 mm 265 9.62 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 9.62.1 150 mm 9.62.2 115 mm 9.62.3 90 mm 266 9.63 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 9.63.1 300 mm weighing not less than 200 gms. 9.63.2 250 mm weighing not less than 150 gms. 9.63.3 200 mm weighing not less than 120 gms. 267 9.64 Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) 268 9.65 Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 9.65.1 300x16 mm 9.65.2 250x16 mm 269 9.66 Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.66.1 250x10 mm 9.66.2 200x10 mm 9.66.3 150x10 mm 9.66.4 100x10 mm 270 9.67 Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. 271 9.68 Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 9.68.1 300x20x6 mm 9.68.2 250x20x6 mm 272 9.69 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 9.69.1 125 mm 9.69.2 100 mm 9.69.3 75 mm 273 9.70 Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 9.70.1 150 mm 9.70.2 115 mm 9.70.3 90 mm 274 9.71 Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 9.71.1 300 mm weighing not less than 200 gms. 9.71.2 250 mm weighing not less than 150 gms. 9.71.3 200 mm weighing not less than 120 gms. 275 9.72 Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) 276 9.73 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 9.73.1 125x64x1.90 mm 9.73.2 100X58X1.90 mm 9.73.3 75x47x1.80 mm 9.73.4 50x37x1.50 mm 277 9.74 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 9.74.1 125x64x2.50 mm 9.74.2 100x60x2.50 mm 9.74.3 75x50x2.50 mm 278 9.75 Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) 279 9.76 Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. 280 9.77 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.77.1 125x85x5.5 mm (heavy type) 9.77.2 125x70x4 mm (ordinary type) 9.77.3 100x85x5.5 mm (heavy type) 9.77.4 100x70x4 mm (ordinary type) 9.77.5 75x65x4 mm (heavy type) 9.77.6 75x40x2.5 mm (ordinary type) 9.77.7 50x40x2.5 mm (ordinary type) 281 9.78 Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 9.78.1 150x125x27x5 mm 9.78.2 125x125x27x5 mm 9.78.3 100x125x27x5 mm 9.78.4 75x100x20x3.2 mm 282 9.79 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.79.1 400x10 mm 9.79.2 250x10 mm 9.79.3 200x10 mm 9.79.4 150x10 mm 9.79.5 100x10 mm 283 9.80 Providing and fixing bright finished brass door latch with necessary screws etc. complete. 9.80.1 300x16x5 mm 9.80.2 250x16x5 mm 284 9.81 Providing and fixing bright finished brass handles with necessary screws etc. complete. 9.81.1 125 mm 9.81.2 100 mm 9.81.3 75 mm 285 9.82 Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 9.82.1 300x16mm 9.82.2 250x16mm 286 9.83 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 287 9.84 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). 288 9.85 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 289 9.86 Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). 290 9.87 Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 9.87.1 40 mm 9.87.2 50 mm 9.87.3 65 mm 9.87.4 75 mm 291 9.88 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) 292 9.89 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 293 9.90 Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. 294 9.91 Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 9.91.1 300 mm weighing not less than 330 gms 9.91.2 250 mm weighing not less than 280 gms 9.91.3 200 mm weighing not less than 240 gms 295 9.92 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 9.92.1 150 mm 9.92.2 115 mm 9.92.3 90 mm 296 9.93 Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. 297 9.94 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. 298 9.95 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. 299 9.96 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 300 9.97 Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 301 9.98 Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). 302 9.99 Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : 9.99.1 Size 40 mm 9.99.2 Size 50 mm 9.99.3 Size 65 mm 9.99.4 Size 75 mm 303 9.100 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. 304 9.101 Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 9.101.1 300x16mm 9.101.2 250x16mm 305 9.102 Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 9.102.1 400X10mm 9.102.2 300x10mm 9.102.3 250x10mm 9.102.4 200x10 mm 9.102.5 150x10 mm 9.102.6 100x10 mm 306 9.103 Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 9.103.1 300x16x5mm 9.103.2 250x16x5mm 307 9.104 Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. 308 9.105 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 9.105.1 125 mm 9.105.2 100 mm 9.105.3 75 mm 309 9.106 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. 310 9.107 Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 9.107.1 300 mm weighing not less than 330 gms 9.107.2 250 mm weighing not less than 280 gms 9.107.3 200 mm weighing not less than 240 gms 311 9.108 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 9.108.1 125x75x4 mm 9.108.2 125x63x4 mm 9.108.3 100x75x4 mm 9.108.4 100x63x4 mm 9.108.5 100x63x3.2 mm 9.108.6 75x63x4 mm 9.108.7 75x63x3.2 mm 9.108.8 75x45x3.2 mm 312 9.109 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 9.109.1 300x16 mm 9.109.2 250x16 mm 313 9.110 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.110.1 400X10mm 9.110.2 300x10 mm 9.110.3 250x10 mm 9.110.4 200x10 mm 9.110.5 150x10 mm 9.110.6 100x10 mm 314 9.111 Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. 315 9.112 Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 316 9.113 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.113.1 125 mm 9.113.2 100 mm 9.113.3 75 mm 317 9.114 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 9.114.1 Single rubber stopper 9.114.2 Twin rubber stopper 318 9.115 Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 319 9.116 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 9.117 Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. 321 9.118 Providing and fixing PTMT handles with necessary screws etc. complete. 9.118.1 125x34x24 mm weighing not less than 23 gms. 9.118.2 150x34x24 mm weighing not less than 26 gms. 322 9.119 Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 9.119.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 9.119.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. 323 9.120 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 9.120.1 152x42x18 mm weighing not less than 60 gms. 9.120.2 202x42x18 mm weighing not less than 78 gms. 324 9.121 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. 325 9.122 Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. 326 9.123 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 9.123.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.1.1 Second class teak wood. 9.123.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.1.3 Kiln seasoned selected class of sheesham wood. 9.123.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.2.1 Second class teak wood. 9.123.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.2.3 Kiln seasoned selected class of sheesham wood. 9.123.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.3.1 Second class teak wood. 9.123.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.3.3 Kiln seasoned selected class of sheesham wood. 9.123.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.4.1 Second class teak wood. 9.123.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.4.3 Kiln seasoned selected class of sheesham wood. 327 9.124 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 9.124.1 With 2nd class teak wood beading 62x19 mm. 9.124.2 With 12 mm mild steel U beading. 328 9.125 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. 329 9.126 Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). 330 9.127 Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. 331 9.128 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 332 9.129 Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). 9.129.1 Triple strip vertical type. 9.129.2 Double strip (horizontal type). 333 9.130 Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). 334 9.131 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 9.131.1 300mm long 9.131.2 450mm long 9.131.3 500mm long 335 9.132 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 336 9.133 Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. 9.133.1 Marine plywood conforming to IS: 710 9.133.2 Fire retardant plywood conforming to IS: 5509. 337 9.134 Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 9.134.1 1.5 mm thick. 9.134.2 1.0 mm thick. 338 9.135 Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. 339 9.136 Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. 9.136.1 With decorative veneering on one side and commercial veneering on other side. 9.136.2 With non decorative veneering on both sides. 340 9.137 Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). 341 9.138 Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 9.138.1 12 mm thick. 9.138.2 18 mm thick. 9.138.3 25 mm thick. 342 9.139 Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete 343 9.140 Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 9.140.1 18 mm thick 9.140.2 25 mm thick 344 9.141 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 9.141.1 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 9.141.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 9.141.3 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 9.141.4 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 9.141.5 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 9.141.6 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 345 9.142 Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 9.142.1 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 9.142.2 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 9.142.3 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 9.142.4 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9.142.5 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. 346 9.143 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. 347 9.144 Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 348 9.145 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). 9.145.1 Board 12 mm thick 9.145.2 Board 18 mm thick 349 9.146 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 9.146.1 18 mm thick 9.146.2 25 mm thick 350 9.147 Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. 351 9.148 Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. 352 9.149 Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. 9.149.1 Wt. 8.20 kg/m2 9.149.2 Wt. 4.2 kg/m2 353 9.150 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 9.150.1 12mm thick commercial ply conforming to IS: 1328 BWR type. 9.150.2 18mm thick commercial ply conforming to IS: 1328 BWR type. 354 9.151 Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. 355 9.152 Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. 356 9.153 Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. 357 9.154 Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. 358 9.155 Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. 9.155.1 Using 8mm thick magnesia block 9.155.2 Using10mm thick magnesia block 9.155.3 Using12mm thick magnesia block 9.155.4 Using12mm thick magnesia block 359 9.156 Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. 360 9.157 Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. 361 9.158 Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: 9.158.1 Extruded section Profile size 48x40 mm. 9.158.2 Extruded section Profile size 42x50 mm. 362 9.159 Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 363 9.160 Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. 364 9.161 Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. 365 9.162 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. 366 9.163 Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. 367 9.164 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. 368 9.165 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. 369 9.166 Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. 9.166.1 Plain PVC door shutters. 9.166.2 Pre laminated PVC door shutters. 370 9.167 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. 371 9.168 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: 9.168.1 Non decorative finish. 9.168.2 Decorative finish (both side wood grained finish). 372 9.169 Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) 9.169.1 Single rebate (75 mm X 50 mm) 9.169.2 Single rebate (100 mm X50 mm) 9.169.3 Single or double rebate (125 mm X 65 mm) 373 9.170 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter 374 9.171 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 9.171.1 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 9.171.2 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 375 9.172 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 9.172.1 18 mm thick 9.172.2 25 mm thick 376 9.173 Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 9.173.1 6 mm thick 9.173.2 12 mm thick 377 9.174 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. 378 9.175 Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 379 9.176 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. 9.176.1 Non decorative finish (matt finish). 9.176.2 Decorative finish (wood grained finish). 380 9.177 Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. 381 9.178 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided 382 9.179 Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. 383 9.180 Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 384 9.181 Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. 385 9.182 Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). 386 9.183 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). 387 9.184 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. 388 9.185 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 389 9.186 Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. 390 9.187 Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) 9.187.1.4 ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) 9.187.1.5 Glazing bead (12mm x 18mm) 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) 9.187.2.3 Casement Glazing bead (35mm x 18 mm) 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) 9.187.3.2 Sliding window Sash (60mm x 44mm) 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) 9.187.4.2 Sliding Door Sash (80mm x 44mm) 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) 391 9.188 Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 9.188.1 200 x 19 x 1.9 mm 9.188.2 250 x 19 x 1.9 mm 9.188.3 300 x 19 x 1.9 mm 9.188.4 350 x 19 x 1.9 mm 9.188.5 400 x 19 x 1.9 mm 392 9.189 Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. 393 9.190 Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. 394 9.191 Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. 395 9.192 Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. 396 9.193 Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. 397 9.194 Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) 398 9.195 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) 399 9.196 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). 400 9.197 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) 401 9.198 Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). 402 9.199 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) 403 9.200 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. 404 9.201 Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter 405 9.202 Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 9.202.1 1mm thick laminated sheet 9.202.2 0.12 mm thick laminated sheet 406 9.203 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 9.203.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.2 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.3 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 407 9.204 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 9.204.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 9.204.2 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.204.3 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 408 9.205 Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. 409 9.206 Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. 9.206.1 Acrylic Solid Surface sheet – Glacier white designer white 9.206.1.1 6 mm thick sheet 9.206.1.2 12 mm thick sheet 9.206.2 Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 9.206.2.1 6 mm thick sheet 9.206.2.2 12 mm thick sheet 9.206.3 Acrylic Solid Surface sheet - Any other 9.206.3.1 6 mm thick sheet 9.206.3.2 12 mm thick sheet 410 9.207 Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). 411 9.208 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.208.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 412 9.209 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.209.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.209.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 9.209.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 413 9.210 Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.210.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.210.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 414 9.211 HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.211.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.211.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 415 9.212 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.212.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.2 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. 416 9.213 Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 9.213.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 417 9.214 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 9.214.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 418 9.215 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 9.215.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.3 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 419 9.216 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 9.216.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 420 9.217 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. 421 9.218 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. 422 10.1 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 423 10.2 Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 424 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. 425 10.4 Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. 426 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6mm for diagonal braces 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece. 427 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. 10.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 10.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover. 428 10.7 Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. 10.7.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area. 10.7.2 Exceeding 16.80 sqm in area. 429 10.8 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). 430 10.9 Providing and fixing ball bearing for rolling shutters. 431 10.10 Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). 10.10.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.10.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.10.3 Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. 432 10.11 Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.11.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 433 10.12 Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: 10.12.1 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.2 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.3 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.4 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.5 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.6 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 434 10.13 Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. 10.13.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.13.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 435 10.14 Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.14.1 Hot finished welded type tubes 10.14.2 Hot finished seamless type tubes 10.14.3 Electric resistance or induction butt welded tubes. 436 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. 437 10.16 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. 438 10.17 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. 439 10.18 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 440 10.19 Providing and fixing bolts including nuts and washers complete. 441 10.20 Providing and fixing M.S. rivets of sizes in position. 442 10.21 Welding by gas or electric plant including transportation of plant at site etc. complete. 443 10.22 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 444 10.23 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. 10.23.1 M.S. tube. 10.23.2 E.R.W. tubes. 445 10.24 Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10.24.1 10x60 mm 10.24.2 10x80 mm 10.24.3 10x120 mm 10.24.4 10x140 mm 10.24.5 10x160mm 446 10.25 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 447 10.26 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 448 10.27 Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. 10.27.1 With 4.0 mm thick glass panes 10.27.2 With 5.50 mm thick glass panes 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 449 10.28 Add extra for providing and fixing froasted glass instead of float glass. 10.28.1 With 4.0 mm thick glass panes. 10.28.2 With 5.5 mm thick glass panes. 450 10.29 Supplying at site: 10.29.1 R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). 10.29.2 Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) 10.29.3 Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). 451 10.30 Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). 452 10.31 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. 453 10.32 Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. 454 10.33 Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). 455 10.34 Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) 10.34.1 Made of G.I. wire. 10.34.2 Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. 456 10.35 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) 457 10.36 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). 458 10.37 Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer 459 10.38 Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 10.38.1 Openable window 10.38.2 Fixed windows 460 10.39 Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. 10.39.1 Openable single rebate window 10.39.2 Fixed single rebate window 461 10.40 Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. 10.40.1 Openable double rebate window 10.40.2 Fixed double rebate window 462 10.41 Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) 463 10.42 Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 464 10.43 Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 465 11.1 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 466 11.2 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 467 11.3 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 468 11.4 Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. 469 11.5 Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. 470 11.6 Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 471 11.7 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.7.1 Dark shade pigment with ordinary cement. 11.7.2 Light shade pigment with white cement. 11.7.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.7.4 White cement without any pigment. 11.7.5 Light shade pigment with ordinary cement. 11.7.6 Ordinary cement without any pigment. 472 11.8 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) 11.8.1 Dark shade pigment with Ordinary cement. 11.8.2 Light shade pigment with white cement. 11.8.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.8.4 White cement without any pigment. 11.8.5 Light shade pigment with ordinary cement. 11.8.6 Ordinary cement without any pigment. 473 11.9 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.9.1 Dark shade pigment with ordinary cement. 11.9.2 Light shade pigment with white cement. 11.9.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.9.4 White cement without any pigment. 11.9.5 Light shade pigment with ordinary cement. 11.9.6 Ordinary cement without any pigment. 474 11.10 Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : 11.10.1 Dark shade pigment with ordinary cement. 11.10.2 Light shade pigment with white cement. 11.10.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.10.4 White cement without any pigment. 11.10.5 Light shade pigment with ordinary cement. 11.10.6 Ordinary cement without any pigment. 475 11.11 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. 476 11.12 Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 477 11.13 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . 478 11.14 Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.14.1 Light shade using white cement. 11.14.2 Medium shade using 50%white cement and 50% ordinary cement. 11.14.3 Dark shade using ordinary cement. 11.14.4 Ordinary cement without any pigment. 479 11.15 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. 480 11.16 Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : 11.16.1 Light shade pigment using white cement. 11.16.2 Medium shades pigment using 50% white cement and 50% ordinary cement. 11.16.3 Dark shade pigment using ordinary cement. 11.16.4 Ordinary cement without any pigment. 481 11.17 Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.17.1 Light shade pigment using white cement. 11.17.2 Medium shade pigment using 50% white cement, 50% ordinary cement. 11.17.3 Dark shade pigment using ordinary cement. 11.17.4 Ordinary cement without any pigment. 482 11.18 Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. 11.18.1 Light shade pigment using white cement. 11.18.2 Medium shade pigment using 50% white cement 50% Grey cement. 11.18.3 Dark shade pigment using ordinary cement. 11.18.4 Ordinary cement without any pigment. 483 11.19 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) 11.19.1 Makrana white second quality. 11.19.2 Raj Nagar plain. 11.19.3 Agaria White/Morgarh 11.19.4 Katni marble 11.19.5 Black Zebra. 11.19.6 Udaipur / Baroda green marble 11.19.7 Pink plain marble. 11.19.8 Jaisalmer Yellow 484 11.20 Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) 11.20.1 Makrana white second quality. 11.20.2 Raj Nagar plain. 11.20.3 Agaria White/Morgarh 11.20.4 Katni marble 11.20.5 Black Zebra. 11.20.6 Udaipur / Baroda green marble 11.20.7 Pink plain marble. 11.20.8 Jaisalmer Yellow 485 11.21 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) 11.21.1 Makrana white second quality. 11.21.2 Raj Nagar plain. 11.21.3 Agaria White/Morgarh 11.21.4 Katni marble 11.21.5 Black Zebra. 11.21.6 Udaipur / Baroda green marble 11.21.7 Pink plain marble. 11.21.8 Jaisalmer Yellow 486 11.22 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black 11.22.2.1 Granite fine grained dark crystal of other colours and various patterns 11.22.2.2 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns 11.22.2.3 Granite grey/pink/brown with various patterns 11.22.3 Cuddpah stone 487 11.23 Extra for prefinished nosing to treads of steps of marble stone. 488 11.24 Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. 489 11.25 Extra for prefinished grooves to treads of steps of granite stone 490 11.26 Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 491 11.27 Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 492 11.28 Italian marble flooring in required design and patterns 11.28.1 Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. 493 11.29 Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 111.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns 494 11.30 Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns 11.90.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns 492 11.31 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) 11.31.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.3 Gray/Pink/Brown or equivalent with various patterns 495 11.32 Deduct for not polishing granite flooring (item no 11.29 & 11.30) 496 11.33 Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, 11.33.1 Flamed Finish Polish 11.33.2 Leather Finish Polish 497 11.34 Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. 498 11.35 Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. 499 11.36 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) 500 11.37 Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 501 11.38 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 502 11.38.1 10-12 mm thick 11.38.2 20 mm thick 503 11.39 Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) 504 11.40 Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 11.40.1 Marble work 11.40.2 Granite work. 505 11.41 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. 506 11.42 Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 507 11.43 Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. 508 11.44 Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. 11.44.1 Red sand stone 11.44.2 White sand stone 11.44.3 Grey lime stone 11.44.4 Kota stone 509 11.45 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. 11.45.1 Red sand stone 11.45.2 White sand stone 510 11.46 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar 11.46.1 Red sand stone 11.46.2 White sand stone 511 11.47 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 512 11.48 Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. 513 11.49 Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 514 11.50 Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. 515 11.51 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. 516 11.52 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. 517 11.53 Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. 518 11.54 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. 519 11.55 Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. 520 11.56 Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 521 11.57 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 522 11.58 Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: 523 11.59 Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. 524 11.60 Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. 525 11.60.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. 526 11.60.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 527 11.61 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 11.61.1 Marble tiles (polished) Raj Nagar. 11.61.2 Granite tile of any colour /shade 528 11.62 Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). 11.62.1 Gunmetal cramps. 11.62.2 Stainless steel cramps. 529 11.63 Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 11.63.1 Fastener with threaded dia 6 mm. 11.63.2 Fastener with threaded dia 10 mm. 11.63.3 Fastener with threaded dia 12 mm. 530 11.64 Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. 11.64.1 White Agaria Marble Stone. 11.64.2 Granite Stone of approved shade. 531 11.65 Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 11.65.1 300 mm Finished Floor Height (FFH) 11.65.2 450 mm Finished Floor Height (FFH). 532 11.66 Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. 533 11.67 Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 11.67.1 1 mm thick 11.67.2 2 mm thick 11.67.3 3 mm thick 534 11.68 Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. 535 11.69 Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. 536 11.70 Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. 537 11.71 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 11.71.1 100 mm thick 11.71.2 200mm thick 538 11.72 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 11.72.1 80 mm thick C.C. paver block of M-35 grade 11.72.2 60 mm thick C.C. paver block of M-35 grade 11.72.3 60 mm thick C.C. paver block of M-30 grade 539 11.73 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). 540 11.74 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. 541 11.75 Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. 11.75.1 Granite Door frame for 100mm thick wall Thickness. 11.75.2 Granite Door frame for 200mm thick wall Thickness. 542 11.76 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11.76.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11.76.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 543 11.77 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 77.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11. 77.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 544 11.78 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 78.1 In light shade glossy/ rustic /stain finished 11. 78.1.1 Size 600X600 mm thickness 9-10 mm 11. 78.1.2 Size 800X800mm thickness 11-12mm 11. 78.1.3 Size 800X1200 mm thickness 11-12mm 11. 78.2 In dark shade glossy/ rustic /stain finished 11. 78.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 78.2.2 (b) Size 800X800mm thickness 11-12mm 11. 78.2.3 (c) Size 800X1200 mm thickness 11-12mm 545 11.79 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 79.1 In light shade glossy/ rustic /stain finished 11. 79.1.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.1.2 (b) Size 800X800mm thickness 11-12mm 11. 79.1.3 (c) Size 800X1200 mm thickness 11-12mm 11. 79.2 In dark shade glossy/rustic/stain finished 11. 79.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.2.2 (b) Size 800X800mm thickness 11-12mm 11. 79.2.3 (c) Size 800X1200 mm thickness 11-12mm 546 11.80 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 80.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 80.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.1.2 (b) Size 600X600mm thickness 9-10mm 11. 80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 11. 80.2 In dark colour and shade etc. 11. 80.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.2.2 (b) Size 600X600mm thickness 9-10mm 11. 80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 547 11.81 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm 548 11.82 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm 11. 82.1.2 Size 800X800mm thickness 11-12mm 11.82.1.3 Size 800X1600 mm thickness 11-12mm 11.82.1.4 Size 1000X1000 mm thickness 11-12mm 11. 82.1.5 Size 600X1200 mm thickness 11-12mm 11. 82.1.6 Size 800X1200 mm thickness 11-12mm 11. 82.1.7 Size 1200X1200 mm thickness 11-12mm 11.82.1.8 Size 1200X1800 mm thickness 11-12mm 11.82.1.9 Size 1200X2400 mm thickness 11-12mm 11. 82.2 For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm 11. 82.3 For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm 549 11.83 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete 11. 83.1 For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades 11. 83.1.1 Size 600X600 mm thickness 9-10 mm 11. 83.1.2 Size 800X800mm thickness 11-12mm 11. 83.1.3 Size 600X1200 mm thickness 11-12mm 11. 83.1.4 Size 800X1200 mm thickness 11-12mm 550 11.84 Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 84.1.3 Gray/Pink/Brown with various patterns 551 11.85 Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 85.1.3 Gray/Pink/Brown with various patterns 552 11. 86 Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. 11. 86.1 Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. 11. 86.2 Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. 553 11.87 Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. 554 11.88 Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. 555 11.89 Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. 556 11.90 Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. 557 11.91 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 11. 91.1 300x300mm 11. 91.2 400x400mm 11. 91.3 600x600mm 558 11.92 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. 559 12.1 Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00mm thick with zinc coating not less than 275gm/m² 12.1.2 0.80mm thick with zinc coating not less than 275gm/m² 12.1.3 0.63 mm thick with zinc coating not less than 275gm/m² 560 12.2 Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. 561 12.3 Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : 562 12.4 Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 12.4.1 0.80mm thick with zinc coating not less than 275gm/m² 12.4.2 0.63mm thick with zinc coating not less than 275gm/m² 563 12.5 Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² 564 12.6 Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² 565 12.7 Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 12.7.1 0.80mm thick with zinc coating not less than 275gm/m² 12.7.2 0.63mm thick with zinc coating not less than 275gm/m² 566 12.8 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. 567 12.9 Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. 568 12.10 Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. 569 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. 570 12.12 Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. 12.12.1 Corrugated serrated adjustable ridges 12.12.2 Plain wing adjustable ridges 12.12.3 Close fitting adjustable ridges 12.12.4 Unserrated adjustable hips 571 12.13 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: 12.13.1 Corrugated apron pieces 12.13.2 Eaves filler pieces 12.13.3 North light curves 12.13.4 ventilator curves 12.13.5 Barge boards 12.13.6 Ridge finials 12.13.7 Special north light curves 12.13.8 S type louvers 572 12.14 Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. 573 12.15 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 574 12.16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : 12.16.1 Ridges plain (500 - 600mm). 12.16.2 Flashings/ Aprons.( Upto 600 mm) 12.16.3 North light curves. 12.16.4 Barge board (Upto 300 mm) 12.16.5 Crimp curve 12.16.6 Gutter. (600 mm over all girth) 575 12.17 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 12.17.2 2mm thick flat. 576 12.18 Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 12.18.1 10mm thick 12.18.2 16mm thick 577 12.19 Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : 12.19.1 Red sand stone slab 12.19.2 White sand stone slab : 578 12.20 Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 579 12.21 Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. 580 12.22 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 581 12.23 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. 582 12.24 Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) 583 12.25 Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) 584 12.26 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase 585 12.27 Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. 586 12.28 Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 12.28.1 100 mm diameter 12.28.2 150 mm diameter 587 12.29 Providing and fixing ISI marked sand cast iron rain water pipes. 12.29.1 100 mm dia minimum wall thickness 5mm 12.29.2 150 mm dia minimum wall thickness 5mm 588 12.30 Providing lead caulked joints to sand cast iron rain water pipes and fittings : 12.30.1 100 mm dia. Pipe 12.30.2 150 mm dia. Pipe 589 12.31 Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : 12.31.1 Sand cast iron bend : 12.31.1.1 100 mm diameter 12.31.1.2 150 mm diameter 12.31.2 Sand cast iron plain shoes : 12.31.2.1 100 mm diameter 12.31.2.2 150 mm diameter 590 12.32 Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) 591 12.33 Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) 12.33.1.2 110 mm (minimum wall thickness 2.2mm) 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) 12.33.2.2 110 mm (minimum wall thickness 2.2mm) 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) 592 12.34 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.34.1 75 mm (minimum wall thickness 1.8mm) 12.34.2 110 mm (minimum wall thickness 2.2mm) 593 12.35 Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. 594 12.36 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. 595 12.37 Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) 12.37.1 Stone ware spout 12.37.2 Upvc spout (Pipe dia.110 mm) 596 12.38 Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. 12.38.1 Base metal thickness 0.8mm up to span 15 meter 12.38.2 Base metal thickness 0.9mm , up to span 18 meter 12.38.3 Base metal thickness 1.0 mm, up to span 21 meter 12.38.4 Base metal thickness 1.1 mm, up to span 23 meter 12.38.5 Base metal thickness 1.2mm, up to span 25meter 12.38.6 Base metal thickness 1.3 mm, up to span 27 meter 12.38.7 Base metal thickness 1.4mm, up to span 29meter 12.38.8 Base metal thickness 1.5 mm, up to span 31 meter 12.38.9 Base metal thickness 1.6 mm, up to span 33 meter 12.38.10 Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. 12.38.11 Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 12.38.12 Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 597 12.39 Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. 598 12.40 Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). 599 12.41 Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. 600 12.42 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 601 12.43 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. 602 12.44 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : 603 12.44.1 With Type N - Normal 50 mm thick 604 12.44.2 With Type SE - Self Extinguishing type 50 mm thick. 605 12.45 Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. 606 12.46 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. 607 12.47 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 608 12.48 Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. 609 12.49 Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. 610 12.50 Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 611 12.51 Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 612 12.52 Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 613 12.53 Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 614 12.54 Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 615 12.55 Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. 12.55.1 Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. 12.55.2 Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. 12.55.3 Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. 616 12.56 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. 617 12.57 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 618 12.58 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board 12.58.1.1 Flat surfaces 12.58.1.2 Curved surfaces 12.58.1.3 Sunk or raised mouldings 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). 12.58.2.2 Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 12.58.2.3 Gypsum moisture resistant board. 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 619 12.59 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.59.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.59.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.59.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.59.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. 12.59.5 Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 12.59.6 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 12.59.7 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. 620 12.60 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with 12.60.1 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.60.2 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. 621 12.61 Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). 622 12.62 Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12.62.1 12mm thick insulating board 12.62.1.1 Natural colour insulating board 12.62.1.2 White face insulating board 12.62.1.3 Flame retardant face insulating board 12.62.2 Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 12.62.3 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 12.62.4 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 12.62.5 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns 623 12.63 Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. 624 12.64 Extra for providing and fixing ceiling to curved surfaces in narrow widths 625 12.65 Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). 626 12.66 Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape 627 12.67 Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. 628 12.68 Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : 12.68.1 With Type N - Normal 50 mm thick 12.68.2 With Type SE - Self Extinguishing type 50 mm thick 629 12.69 Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). 12.69.1 costing upto 70/- per metre, 12.69.2 Rs 70- 150 per meter 12.69.3 Upto 200 per meter 630 12.70 Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.70.1 With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick 12.70.2 With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick 12.70.3 With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick 631 12.71 Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 632 12.72 Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. 12.72.1 Standard White / Natural Satin Shade 12.72.2 Wooden Finish 633 12.73 Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.73.1 Tile of 600 mm wide ,600 mm long and 0.5 mm thick 12.73.2 Plank of 600mm wide ,1200 mm long and 0.6mm thick 634 12.74 Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 635 12.75 Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 636 12.76 Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 637 12.77 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) 638 12.78 Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 639 12.79 Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 640 12.80 Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. 641 12.81 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 12.81.1 With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. 12.81.2 With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. 642 12.82 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 643 12.83 Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . 644 12.84 Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) 645 12.85 Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric 12.85.1 With precontraint tensile membrane 1050 GSM (20 years Warranty) 12.85.2 With precontraint tensile membrane 1050 GSM (15 Years warranty) 646 13.1 12 mm cement plaster of mix : 13.1.1 1:4 (1 cement : 4 sand) 13.1.2 1:6 (1 cement : 6 sand) 647 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix 13.2.1 1:4 (1 cement : 4 sand) 13.2.2 1:6 (1 cement : 6 sand) 648 13.3 20 mm cement plaster of mix : 13.3.1 1:4 (1 cement : 4 sand) 13.3.2 1:6 (1 cement : 6 sand) 649 13.4 12 mm cement plaster finished with a floating coat of neat cement of mix : 13.4.1 1:3 (1 cement : 3 sand) 13.4.2 1:4 (1 cement : 4 sand) 650 13.5 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 13.5.1 1:3 (1 cement : 3 sand) 13.5.2 1:4 (1 cement : 4 sand) 651 13.6 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 652 13.7 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 653 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 654 13.9 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 655 13.10 Neat cement punning 656 13.11 Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. 657 13.12 Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. 658 13.13 Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. 659 13.14 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 660 13.15 Extra for plastering 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof 661 13.16 Extra for plastering on circular work not exceeding 6 m in radius: 13.16.1 In one coat 13.16.2 In two coats 662 13.17 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 13.17.1 In one coat 13.17.2 In two coats 663 13.18 Extra for plastering Spherical, Groined ceiling, Flewing soffits. 13.18.1 Spherical ceiling 13.18.2 Groined ceiling 13.18.3 Flewing soffits 664 13.19 Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). 665 13.20 Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 666 13.21 Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. 667 13.22 Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). 668 13.23 Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 669 13.24 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. 670 13.25 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. 671 13.26 Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. 672 13.27 Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete 673 13.27.1 G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. 13.27.2 Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 674 13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : 13.28.1 Flush Band 13.28.2 Sunk Band 13.28.3 Raised Band 13.28.4 Moulded Band 675 13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): 13. 29.1 Flush Band 13. 29.2 Sunk Band 13. 29.3 Raised Band 13. 29.4 Moulded Band 676 13.30 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). 677 13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : 13.31.1 Flush / Ruled/ Struck or weathered pointing. 13.31.2 Raised and cut pointing 13.31.3 Sunk pointing 678 13.32 Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). 13.32.1 Flush/ Ruled pointing 13.32.2 Raised and cut pointing 679 13.33 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) 680 13.34 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing 681 13.35 Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. 682 13.36 Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. 683 13.37 Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. 13.37.1 size 1200mmx1800mm 13.37.2 size 1200mmx2400mm 13.37.3 size 1200mmx3000mm 684 13.38 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 685 13.39 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. 686 13.40 Extra for lining out plaster to imitate stone or concrete blocks walling. 687 13.41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 688 13.42 Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. 689 13.43 White washing with lime to give an even shade: New work (three or more coats) 690 13.44 Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. 691 13.45 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. 692 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 693 13.47 Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.47.1 One coat. 13.47.2 Two coats. 694 13.48 Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.48.1 One coat. 13.48.2 Two coats. 695 13.49 Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. 696 13.50 Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). 697 13.51 Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. 698 13.52 Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface 699 13.53 Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) 700 13.54 Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.54.1 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture 13.54.2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. 13.54.3 Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. 701 13.55 Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: 13.55.1 One coat 13.55.2 Two coats 702 13.56 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. 13.56.1 On steel work 13.56.2 On concrete work 703 13.57 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. 704 13.58 Applying a coat of mordant solution on G.S. sheet : 13.58.1 With a solution of 38 gms of copper acetate in a litre of soft water 13.58.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. 705 13.59 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 13.59.1 75 mm diameter pipes 13.59.2 100 mm diameter pipes 13.59.3 150 mm diameter pipes 706 13.60 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 13.60.1 75 mm diameter pipes 13.60.2 100 mm diameter pipes 13.60.3 150 mm diameter pipes 707 13.61 Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) 708 13.62 Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 709 13.63 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. 710 13.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 711 13.65 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 712 13.66 Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.66.1 One coat. 13.66.2 Two coats. 713 13.67 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.67.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 13.67.2 With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. 13.67.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. 714 13.68 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. 715 13.69 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. 716 13.70 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 717 13.71 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work 718 13.72 Varnishing with varnish of approved brand and manufacture: 13.72.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. 13.72.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. 719 13.73 French spirit polishing: Two or more coats on new works including a coat of wood filler. 720 13.74 Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. 721 13.75 Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. 722 13.76 Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. 723 13.77 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. 724 13.78 Lettering with black Japan paint of approved brand and manufacture. 725 13.79 Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. 726 13.80 Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 13.80.1 0.8-1.2mm thickness 13.80.2 2.0-2.5mm thickness 727 13.81 Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. 728 13.82 Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 13.82.1 6 mm thick plaster for internal walls 13.82.2 8 mm thick plaster for external walls exposed to weather. 729 13.83 Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) 13.83.1 ACP sheet 2mm thick 13.83.2 ACP sheet 3mm thick 13.83.3 ACP sheet 4mm thick 730 13.84 Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) 13.84.1 PVC foam sheet 3.0 mm thick 13.84.2 PVC foam sheet 5.0 mm thick 13.84.3 PVC foam sheet 8.0 mm thick 731 13.85 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 732 13.86 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. 733 13.87 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 734 13.88 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 735 13.89 Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. 736 13.90 Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. 737 13.91 Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. 738 13.92 Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. 739 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). 740 14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : 14.2.1 Door chowkhats 14.2.2 Window chowkhats 14.2.3 Clerestory window chowkhats 741 14.3 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. 742 14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. 743 14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.1 Float glass panes of thickness 4 mm 14.5.2 Float glass panes of thickness 5.5 mm 744 14.6 Renewing glass panes with now wooden fillets wherever necessary: 14.6.1 Float glass panes of thickness 4 mm 14.6.2 Float glass panes of thickness 5.5 mm 745 14.7 Renewing glass panes and refixing existing wooden fillets: 14.7.1 Float glass panes of thickness 4 mm 14.7.2 Float glass panes of thickness 5.5 mm 746 14.8 Supplying and fixing new wooden fillets wherever necessary: 14.8.1 2nd class teak wood fillets 14.8.2 Haldu/Bija/Kail wood fillets. 747 14.9 Renewal of old putty of glass panes (length). 748 14.10 Refixing old glass panes with putty and nails. 749 14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets). 750 14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 751 14.13 Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : 14.13.1 Red/ white sand stone slabs 30 to 50 mm thick. 752 14.14 Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.14.1 Sal wood battens. 753 14.15 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.15.1 Not exceeding 4.00 metres in length. 14.15.1.1 Sal wood beams 14.15.1.2 Haldu/Bija/Kail wood fillets. 14.15.2 Above 4.00 metres and upto 5.00 metres length. 14.15.2.1 Sal wood beams 14.15.2.2 Haldu/Bija/Kail wood fillets. 754 14.16 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 755 14.17 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. 756 14.18 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. 757 14.19 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. 758 14.20 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. 14.20.1 Wheel 50 mm dia. and below. 14.20.2 Wheel above 50 mm dia. 759 14.21 Providing and fixing 25 mm thick shutters for cupboard etc. : 14.21.1 Panelled or panelled and glazed shutters : 14.21.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2 Glazed shutters : 14.21.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 760 14.22 Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: 14.22.1 Second class teak wood. 14.22.2 Hard wood, finger jointed 761 14.23 Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.23.1 20 mm diameter. 14.23.2 25 mm diameter. 762 14.24 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. 763 14.25 Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: 14.25.1 Sal wood. 14.25.2 Haldu/Bija/Kail wood. 764 14.26 White washing with lime old work to give an even shade : 14.26.1 two or more coats 14.26.2 one or more coats 765 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 766 14.28 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. 767 14.29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). 768 14.30 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 769 14.31 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). 770 14.32 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 14.32.1 75 mm diameter pipes 14.32.2 100 mm diameter pipes 14.32.3 150 mm diameter pipes 771 14.33 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 14.33.1 75 mm diameter pipes 14.33.2 100 mm diameter pipes 14.33.3 150 mm diameter pipes 772 14.34 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 14.34.1 75 mm diameter pipes 14.34.2 100 mm diameter pipes 14.34.3 150 mm diameter pipes 773 14.35 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 774 14.36 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. 775 14.37 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 776 14.38 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. 777 14.39 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 778 14.40 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. 779 14.41 French spirit polishing: One or more coats on old work. 780 14.42 Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. 781 14.43 Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor 14.43.1 One or more coats on old work. 782 14.44 Polishing on wood work with readymade wax polish of approved brand and manufacture : 14.44.1 Old work 783 14.45 Re-lettering with black Japan paint of approved brand and manufacture. 784 14.46 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 785 14.47 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 14.47.1 32 mm dia 14.47.2 40 mm dia 786 14.48 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. 787 14.49 Finishing walls with water proofing cement paint of required shade : 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 788 14.50 Finishing walls with textured exterior paint of required shade : 14.50.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 14.50.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 789 14.51 Finishing walls with Acrylic Smooth exterior paint of required shade : 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). 790 14.52 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). 791 14.53 Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. 14.53.2 Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm 14.53.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. 792 14.54 Varnishing with varnish of approved brand and manufacture: 14.54.1 One or more coats with copal varnish. 14.54.2 One or more coats with spar varnish. 793 14.55 Melamine polishing on wood work (one or more coat). Old work 794 14.56 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 795 14.57 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 796 14.58 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. 14.58.1 Rough chiseled dressed stone 14.58.2 Fine dressed stone 797 14.59 Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) 798 14.60 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 799 14.61 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). 800 14.62 Colour washing with lime to give an even shade: 14.62.1 (one or more coats) 14.62.2 (two or more coats) 801 14.63 Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. 802 14.64 Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. 803 14.70 Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 14.70.1 8 mm dia bar 10 mm dia hole 14.70.2 10 mm dia bar 12 mm dia hole 14.70.3 12 mm dia bar 16 mm dia hole 14.70.4 16 mm dia bar 20 mm dia hole 14.70.5 20 mm dia bar 25 mm dia hole 14.70.6 25 mm dia bar 32 mm dia hole 14.70.7 32 mm dia bar 40 mm dia hole 804 14.71 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 14.71.1 125x70x4 mm (ordinary type) 14.71.2 100x70x4 mm (ordinary type) 14.71.3 75x65x4 mm (heavy type) 14.71.4 75x40x2.5 mm (ordinary type) 14.71.5 50x40x2.5 mm (ordinary type) 805 14.72 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. 806 14.73 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. 807 14.74 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 808 14.75 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. 809 14.77 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 14.77.1 Bars upto 12 mm diameter 14.77.2 Bars above 12 mm diameter 810 14.78 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. 14.78.1 Upto and including 12mm dia 811 14.83 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) 14.83.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work 14.83.2 Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. 14.83.3 Epoxy injection grout in concrete/RCC work of approved make 812 14.85 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 813 14.88 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. 814 15.1 Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. 815 15.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). 816 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 817 15.4 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. 818 15.5 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. 819 15.6 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 820 15.6.1 In lime mortar with old mughal bricks. 15.6.2 In lime mortar. 15.6.3 In cement mortar. 821 15.7 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : 15.7.1 From brick work in lime mortar. 15.7.2 From brick work in cement mortar. 822 15.8 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: 15.8.1 In lime mortar. 15.8.2 In cement mortar. 823 15.9 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: 15.9.1 In lime mortar. 15.9.2 In cement mortar. 824 15.10 Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : 15.10.1 In lime mortar. 15.10.2 In cement mortar. 825 15.11 Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. 15.11.1 For thickness of tiles 10 mm to 25 mm. 15.11.2 For thickness of tiles above 25 mm and upto 40 mm. 826 15.12 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 827 15.13 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 828 15.14 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.14.1 Of area 3 sq. metres and below. 15.14.2 Of area beyond 3 sq. metres. 829 15.15 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.15.1 Of area 3 sq. metres and below. 15.15.2 Of area beyond 3 sq. metres. 830 15.16 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: 15.16.1 Of sectional area below 40 square centimetres. 15.16.2 Of sectional area 40 square centimetres and above. 831 15.17 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : 15.17.1 Of sectional area below 40 square centimetres. 15.17.2 Of sectional area 40 square centimetres and above. 832 15.18 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : 15.18.2 Of sectional area below 40 square centimetres. 15.18.1 Of sectional area 40 square centimetres and above. 833 15.19 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: 15.19.1 R.S. Joists 15.19.2 Channels, angles, tees and flats 834 15.20 Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. 835 15.21 Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. 836 15.22 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres 837 15.23 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. 838 15.24 Extra for marking of structural steel work required to be re- erected. 839 15.25 Removal of old Tarfelt i/c disposal as directed by Engineer in charge. 840 15.26 Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 841 15.27 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: 15.27.1 G.S. Sheet 15.27.2 Asbestos/ Non asbestors sheet 842 15.28 Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 843 15.29 Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 844 15.30 Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. 845 15.31 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : 15.31.1 T’ or ‘L’ iron or pipe 15.31.2 R.C.C. 846 15.32 Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. 847 15.33 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 848 15.34 Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. 849 15.35 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. 850 15.36 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 15.36.1 Upto 10 mm thick 15.36.2 Thickness above 10 mm upto 25 mm 15.36.3 Thickness above 25 mm upto 40 mm 851 15.37 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: 15.37.1 Thickness upto 40 mm 15.37.2 Thickness above 40 mm upto 75 mm 852 15.38 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 853 15.39 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 15.39.1 75 to 80 mm dia pipe. 15.39.2 100 mm dia pipe 15.39.3 150 mm dia pipe 854 15.40 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15.40.1 15 mm to 40 mm nominal bore 15.40.2 Above 40 mm nominal bore 855 15.41 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: 15.41.1 Upto 150 mm diameter 15.41.2 Above 150 mm dia upto 300 mm dia. 15.41.3 Above 300 mm diameter 856 15.42 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 857 15.43 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 858 15.44 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 859 15.45 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 860 15.46 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 15.46.1 Upto 150 mm diameter 15.46.2 Above 150 mm diameter 861 15.47 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 862 15.48 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 863 15.49 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. 864 15.50 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 15.50.1 100 mm diameter 15.50.2 150 mm diameter 15.50.3 200 mm diameter 15.50.4 250 mm diameter 15.50.5 300 mm diameter 15.50.6 350 mm diameter 15.50.7 400 mm diameter 15.50.8 440 mm diameter 865 15.51 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep 866 15.52 Extra for depth of manholes dismantled: 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). 867 15.53 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. 868 15.54 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : 869 15.55 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 870 15.56 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 871 15.57 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 872 15.58 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : 15.58.1 Water bound macadam road 15.58.2 Bituminous road 873 15.59 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : 15.59.1 Up to 600 mm diameter 15.59.2 Above 600 mm diameter 874 15.60 Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge 15.60.1 Up to 150 mm diameter 15.60.2 Above 150 mm diameter 875 15.61 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. 876 15.62 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 15.62.1 120 x 120 cm (outside to outside) 15.62.2 210 x 120 cm (outside to outside) 877 15.63 Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. 878 15.64 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 879 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. 880 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. 881 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. 882 17.4 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. 883 17.5 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 884 17.6 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.6.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 17.6.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. 17.6.3 Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. 17.6.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. 885 17.7 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require 17.7.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. 17.7.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. 17.7.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. 17.7.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. 886 17.8 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.8.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. 17.8.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. 17.8.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. 17.8.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. 887 17.9 Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. 888 17.10 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. 889 17.11 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 17.11.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. 17.11.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. 17.11.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. 17.11.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. 17.11.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. 17.11.10 Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). 17.11.11 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap 17.11.12 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. 890 17.12 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 891 17.13 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. 892 17.14 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. 17.14.1.2 510x1040 mm bowl depth 225mm. 17.14.1.3 510x1040 mm bowl depth 200mm. 17.14.1.4 510x1040 mm bowl depth 178mm. 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. 17.14.2.2 610x460 mm bowl depth 200 mm. 17.14.2.3 470x420 mm bowl depth 178 mm. 893 17.15 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : 17.15.1 Size450x300x150mm 17.15.2 Size600x450x200mm 894 17.16 Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. 895 17.17 Providing and fixing white vitreous china water closet squatting pan (Indian type) 17.17.1 Long pattern W.C. pan of size 580 mm 17.17.2 Orissa pattern W.C. pan of size 580x440 mm 896 17.18 Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm 897 17.19 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 898 17.20 Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. 899 17.21 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 17.21.1 250x130x30 mm 17.21.2 250x125x25 mm 900 17.22 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity 17.22.1 White 17.22.2 coloured 901 17.23 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) 17.23.1 White 17.23.2 Coloured 902 17.24 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.24.1 White 17.24.2 Black 17.24.3 Coloured (other than black and white) 903 17.25 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 904 17.26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. 905 17.27 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. 906 17.28 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 907 17.29 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 17.29.1 Flat back wash basin of size 630x450mm. 17.29.2 Flat back wash basin of size 550x400mm. 17.29.3 Angle back wash basin of size 600x480mm. 17.29.4 Angle back wash basin of size 400x400mm. 17.29.5 Flat back wash basin of size 450x300mm. 17.29.6 Surgeon type wash basin of size 660x460mm. 908 17.30 Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. 909 17.31 Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: 17.31.1 Size 450x300x150 mm. 17.31.2 Size 600x450x200 mm. 910 17.32 Providing and fixing soil, waste and vent pipes: 17.32.1 Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 17.32.1.1 75 mm dia with wall thickness of 5 mm 17.32.1.2 100 mm dia with wall thickness of 5 mm 17.32.2 Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 17.32.2.1 75 mm dia with wall thickness of 3.5 mm 17.32.2.2 100 mm dia with wall thickness of 4 mm 17.32.2.3 150mm dia with wall thickness of 5mm 17.32.3 Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 17.32.3.1 75 mm dia with wall thickness of 3.5 mm 17.32.3.2 100 mm dia with wall thickness of 3.5mm 17.32.3.3 150mm dia with wall thickness of 4 mm 911 17.33 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 17.33.1 75 mm dia pipe 17.33.2 100 mm dia pipe 912 17.34 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : 17.34.1 For 75 mm dia pipe 17.34.2 For 100 mm dia pipe 17.34.3 For 150 mm dia pipe 913 17.35 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.35.1 150 mm dia 17.35.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.35.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.35.2 100 mm dia 17.35.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.35.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.35.3 75 mm dia 17.35.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm 17.35.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.35.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 914 17.36 Providing and fixing plain bend of required degree. 17.36.1 150 mm dia 17.36.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.36.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.36.2 100 mm dia 17.36.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.36.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.36.3 75 mm dia 17.36.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.36.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 915 17.37 Providing and fixing heel rest sanitary bend 17.37.1 100 mm dia 17.37.1.1 Sand cast iron as per IS - 1729 17.37.1.2 Spun cast iron as per IS - 3989 17.37.2 75 mm dia 17.37.2.1 Sand cast iron as per IS - 1729 17.37.2.2 Spun cast iron as per IS - 3989 916 17.38 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 17.38.1.1 150X150X150X150 17.38.1.2 Sand cast iron as per IS - 3989 17.38.2 100x100x100x100mm 17.38.2.1 Sand cast iron as per IS - 1729 17.38.2.2 Spun cast iron as per IS - 3989 17.38.3 75x75x75x75mm 17.38.3.1 Sand cast iron as per IS - 1729 17.38.3.2 Spun cast iron as per IS - 3989 917 17.39 Providing and fixing double equal plain junction of required degree. 17.39.1 150X150X150X150 mm 17.39.1.1 Sand cast iron as per IS - 3989 17.39.2 100x100x100x100mm 17.39.2.1 Sand cast iron as per IS – 1729 17.39.2.2 Spun cast iron as per IS – 3989 17.39.2.3 Hubless cast(spun) iron as per IS- 15905 17.39.3 75x75x75x75 mm 17.39.3.1 Sand cast iron as per IS – 1729 17.39.3.2 Spun cast iron as per IS – 3989 17.39.3.3 Hubless cast(spun) iron as per IS- 15905 918 17.40 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.40.1 150X150X150 mm 17.40.1.1 Spun cast iron as per IS - 3989 17.40.2 100x100x100 mm 17.40.2.1 Sand cast iron as per IS - 1729 17.40.2.2 Spun cast iron as per IS - 3989 17.40.3 75x75x75 mm 17.40.3.1 Sand cast iron as per IS - 1729 17.40.3.2 Spun cast iron as per IS - 3989 919 17.41 Providing and fixing single equal plain junction of required degree : 17.41.1 150X150X150 mm 17.41.1.1 Spun cast iron as per IS - 3989 17.41.2 100x100x100 mm 17.41.2.1 Sand cast iron as per IS – 1729 17.41.2.2 Spun cast iron as per IS – 3989 17.41.2.3 Hubless cast(spun) iron as per IS- 15905 17.41.3 75x75x75 mm 17.41.3.1 Sand cast iron as per IS – 1729 17.41.3.2 Spun cast iron as per IS – 3989 17.41.3.3 Hubless cast(spun) iron as per IS- 15905 920 17.42 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm 17.42.1 Sand cast iron as per IS - 1729 17.42.2 Spun cast iron as per IS - 3989 921 17.43 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm 17.43.1.1 Sand cast iron as per IS – 1729 17.43.1.2 Spun cast iron as per IS – 3989 17.43.1.3 Hubless cast(spun) iron as per IS- 15905 922 17.44 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm 17.44.1 Sand cast iron as per IS - 1729 17.44.2 Spun cast iron as per IS - 3989 923 17.45 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm 17.45.1 Sand cast iron as per IS – 1729 17.45.2 Spun cast iron as per IS – 3989 17.45.3 Hubless cast(spun) iron as per IS- 15905 924 17.46 Providing and fixing double equal plain invert branch of required degree: 17.46.1 100x100x100x100 mm 17.46.1.1 Sand cast iron as per IS - 1729 17.46.1.2 Sand cast iron as per IS - 3989 17.46.1.3 Hubless cast(spun) iron as per IS- 15905 17.46.2 75x75x75x75 mm 17.46.2.1 Sand cast iron as per IS - 1729 17.46.2.2 Spun cast iron as per IS - 3989 925 17.47 Providing and fixing single equal plain invert branch of required degree: 17.47.1 100x100x100 mm 17.47.1.1 Sand cast iron as per IS - 1729 17.47.1.2 Sand cast iron as per IS - 3989 17.47.1.3 Hubless cast(spun) iron as per IS- 15905 17.47.2 75x75x75 mm 17.47.2.1 Sand cast iron as per IS - 1729 17.47.2.2 Sand cast iron as per IS - 3989 17.47.2.3 Hubless cast(spun) iron as per IS- 15905 926 17.48 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm 17.48.1 Sand cast iron as per IS - 1729 17.48.2 Spun cast iron as per IS - 3989 927 17.49 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm 17.49.1 Sand cast iron as per IS - 1729 17.49.2 Spun cast iron as per IS - 3989 17.49.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 928 17.50 Providing and fixing sand cast iron S&S off sets as per IS: 1729 17.50.1 76 mm off sets 17.50.1.1 With 75 mm dia pipe 17.50.1.2 With 100 mm dia pipe 17.50.2 114 mm off sets 17.50.2.1 With 75 mm dia pipe 17.50.2.2 With 100 mm dia pipe 17.50.3 152 mm off sets 17.50.3.1 With 75 mm dia pipe 17.50.3.2 With 100 mm dia pipe 929 17.51 Providing and fixing sand cast iron S&S off sets as per IS: 3989. 17.51.1 75 mm off sets 17.51.1.1 With 75 mm dia pipe 17.51.1.2 With 100 mm dia pipe 17.51.1.3 With 150 mm dia pipe 17.51.2 150 mm off sets 17.51.2.1 With 75 mm dia pipe 17.51.2.2 With 100 mm dia pipe 17.51.2.3 With 150 mm dia pipe 930 17.52 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 17.52.1 100 mm 17.52.1.1 Sand cast iron as per IS - 1729 17.52.1.2 Spun cast iron as per IS - 3989 17.52.2 75 mm 17.52.2.1 Sand cast iron as per IS - 1729 17.52.2.2 Spun cast iron as per IS - 3989 931 17.53 Providing and fixing terminal guard: 17.53.1 150mm 17.53.1.1 Sand cast iron as per IS - 1729 17.53.1.2 Spun cast iron as per IS - 3989 17.53.1.3 Hubless cast(spun) iron as per IS- 15905 17.53.2 100 mm 17.53.2.1 Sand cast iron as per IS - 1729 17.53.2.2 Spun cast iron as per IS - 3989 17.35.2.3 Hubless cast(spun) iron as per IS-15905 17.53.3 75 mm 17.53.3.1 Sand cast iron as per IS - 1729 17.53.3.2 Spun cast iron as per IS - 3989 17.53.3.3 Hubless cast(spun) iron as per IS- 15905 932 17.54 Providing and fixing collar: 17.54.1 100 mm 17.54.1.1 Sand cast iron S & S as per IS - 1729 17.54.1.2 Sand cast iron S & S as per IS - 3989 17.54.2 75 mm 17.54.2.1 Sand cast iron S & S as per IS - 1729 17.54.2.2 Sand cast iron S & S as per IS- 3989 933 17.55 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 17.55.1 150mm 17.55.2 100 mm 17.55.3 75 mm 934 17.56 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 17.56.1 100 mm dia 17.56.2 75 mm dia 935 17.57 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.57.1 100 mm inlet and 100 mm outlet 17.57.1.1 Spun cast iron S & S as per IS: 3989. 17.57.1.2 Sand Cast iron S & S as per IS: 1729. 17.57.1.3 Hubless cast(spun) iron as per IS-15905 17.57.2 100 mm inlet and 75 mm outlet 17.57.2.1 Sand cast iron S & S as per IS - 3989 17.57.2.2 Spun Cast iron S & S as per IS- 1729. 17.57.2.3 Hubless cast(spun) iron as per IS- 15905 936 17.58 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 17.58.1 75 mm diameter 17.58.2 110 mm diameter 937 17.59 Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 17.59.1 Coupler 17.59.1.1 75 mm 17.59.1.2 110 mm 17.59.2 Single pushfit Coupler 17.59.2.1 75 mm 17.59.2.2 110 mm 17.59.3 Single tee with door 17.59.3.1 75x75x75 mm 17.59.3.2 110x110x110 mm 17.59.4 Single tee without door 17.59.4.1 75x75x75 mm 17.59.4.2 110x110x110 mm 17.59.5 Bend 87.50 17.59.5.1 75 mm bend 17.59.5.2 110 mm bend 938 17.60 Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 17.60.1 75 mm 17.60.2 110 mm 939 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet 940 17.62 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. 17.62.1 Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). 17.62.2 Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). 17.62.3 Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). 941 17.63 Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 17.63.1 100 mm dia 17.63.2 75 mm dia 17.63.3 50 mm dia 942 17.64 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia 17.64.1.2 40 mm dia 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia 17.64.2.2 40 mm dia 943 17.65 Providing and fixing 100 mm sand cast Iron grating for gully trap. 944 17.66 Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. 945 17.67 Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 946 17.68 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing 17.68.1 Circular shape 450mm dia. 17.68.2 Rectangular shape 453x357mm 17.68.3 Oval shape 450x350mm (outer dimensions) 17.68.4 Rectangular shape 1500x450 mm 947 17.69 Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 948 17.70 Providing and fixing toilet paper holder: 17.70.1 C.P. brass 17.70.2 Vitreous china 949 17.71 Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. 17.71.1 Waste coupling 31mm of 79mm length and 62mm breadth 17.71.2 Waste coupling 38mm of 83mm length and 77mm breadth 950 17.72 Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. 951 17.73 Providing and fixing CP brass towel rail of approved quality and make 17.73.1 600x20mm 17.73.2 450x20mm 952 17.74 Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring 953 17.75 Providing and fixing CP brass soap dish of approved quality and make 954 17.76 Providing and fixing CP brass Urinal spreader of approved quality and make 955 17.77 Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. 956 17.78 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 17.78.1 100 mm dia. 957 17.79 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.79.1 Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. 17.79.2 Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. 958 17.80 Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.80.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. 17.80.2 Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. 959 17.81 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. 960 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 961 17.83 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 17.83.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 17.83.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. 962 17.84 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. 963 17.85 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 964 17.86 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. 965 17.87 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 966 17.88 Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. 967 17.89 Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. 968 17.90 Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. 969 17.91 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 17.91.1 75 mm diameter pipe 17.91.2 100 mm diameter pipe 17.91.3 150 mm diameter pipe 970 17.92 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 17.92.1 75 mm diameter pipe 17.92.2 100 mm diameter pipe 17.92.3 150 mm diameter pipe 971 17.93 Repainting bath tub of size 1700x730x430mm with enamel paint. 972 17.94 Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 17.94.1 100 mm dia half round pipe 17.94.2 150 mm dia half round pipe 17.94.3 200mm dia half round pipe 973 17.99 Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 17.99.1 For ground floor buildings. 17.99.2 For Ground floor & Ist floor buildings. 17.99.3 Add extra for every additional floor above Ist floor. 974 17.95 Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) 975 18.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia Pipes. 18.6.1.2 20 mm nominal outer dia .Pipes. 18.6.1.3 25 mm nominal outer dia .Pipes. 18.6.1.4 32 mm nominal outer dia Pipes. 18.6.1.5 40 mm nominal outer dia Pipes. 18.6.1.6 50 mm nominal outer dia .Pipes. 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes. 18.6.2.2 20 mm nominal outer dia .Pipes. 18.6.2.3 25 mm nominal outer dia Pipes. 18.6.2.4 32 mm nominal outer dia Pipes. 976 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 18.7.1 15 mm nominal outer dia Pipes. 18.7.2 20 mm nominal outer dia .Pipes. 18.7.3 25 mm nominal outer dia Pipes. 18.7.4 32 mm nominal outer dia .Pipes. 18.7.5 40 mm nominal outer dia Pipes. 18.7.6 50 mm nominal outer dia .Pipes. 18.7.7 62.50 mm nominal inner dia Pipes. 18.7.8 75 mm nominal inner dia .Pipes. 18.7.9 100mm nominal inner dia .Pipes. 18.7.10 150 mm nominal inner dia Pipes. 977 18.8 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 18.8.1 Internal work - Exposed on wall 18.8.1.1 15 mm dia. nominal bore 18.8.1.2 20 mm dia. nominal bore 18.8.1.3 25 mm dia. nominal bore 18.8.1.4 32 mm dia. nominal bore 18.8.1.5 40 mm dia. nominal bore 18.8.1.6 50 mm dia. nominal bore 18.8.2 Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 18.8.2.1 15 mm dia nominal bore 18.8.2.2 20 mm dia nominal bore 18.8.3 External work : including trenching and refilling etc. 18.8.3.1 15 mm dia. nominal bore 18.8.3.2 20 mm dia. nominal bore 18.8.3.3 25 mm dia. nominal bore 18.8.3.4 32 mm dia. nominal bore 18.8.3.5 40 mm dia. nominal bore 18.8.3.6 50 mm dia. nominal bore 18.8.3.7 65 mm dia. nominal bore 18.8.3.8 80 mm dia. nominal bore 978 18.9 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) 18.9.1 Internal work - Exposed on wall 18.9.1.1 15.88 mm outer diapipe 18.9. 1.2 22.22 mm outer diapipe 18.9.1.3 28.58 mm outer diapipe 18.9.1.4 34.00 mm outer dia Pipe 18.9.1.5 42.70 mm outer dia Pipe 18.9.1.6 48.60 mm outer dia Pipe 18.9.2 Internal work - Concealed Pipe 18.9.2.1 15.88 mm outer dia .Pipes. 18.9.2.2 22.22 mm Outer diaPipes 979 18.12 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.12.1 With C.I. wheel of approved quality (screwed end) 18.12.1.1 25 mm nominal bore 18.12.1.2 32 mm nominal bore. 18.12.1.3 40 mm nominal bore 18.12.1.4 50 mm nominal bore 18.12.1.5 65 mm nominal bore 18.12.1.6 80 mm nominal bore 18.12.2 With brass lever handle of approved quality. 18.12.2.1 25 mm nominal bore 18.12.2.2 32 mm nominal bore. 18.12.2.3 40 mm nominal bore 18.12.2.4 50 mm nominal bore 980 18.13 Providing and fixing CPVC gate valve with knob of approved quality. 18.13.1 25 mm nominal bore 18.13.2 32 mm nominal bore. 18.13.3 40 mm nominal bore 18.13.4 50 mm nominal bore 981 18.14 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.14.1 15 mm nominal bore 18.14.2 20 mm nominal bore 18.14 3 25 mm nominal bore 982 18.15 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.15.1 25 mm nominal bore 18.15.1.1 Horizontal 18.15.1.2 Vertical 18.15.2 32 mm nominal bore 18.15.2.1 Horizontal 18.15.2.2 Vertical 18.15.3 40 mm nominal bore 18.15.3.1 Horizontal 18.15.3.2 Vertical 18.15.4 50 mm nominal bore 18.15.4.1 Horizontal 18.15.4.2 Vertical 18.15.5 65 mm nominal bore 18.15.5.1 Horizontal 18.15.5.2 Vertical 18.15.6 80 mm nominal bore 18.15.6.1 Horizontal 18.15.6.2 Vertical 983 18.16 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 18.16.1 15 mm nominal bore 18.16.2 20 mm nominal bore 18.16.3 25 mm nominal bore 984 18.17 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore 18.17.1.2 20 mm nominal bore 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore 18.17.2.2 20 mm nominal bore 985 18.18 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. 986 18.19 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design 18.19.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.19.2 With flyash bricks of 50 kg/cm2 strength 987 18.20 Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.20.1 With common burnt clay bricks of 25 kg/cm2 compressive strength. 18.20.2 With flyash bricks of 50kg/cm2 strength. 988 18.21 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.21.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.21.2 With flyash bricks of 50kg/sqm compressive strength. 989 18.22 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 18.22.1 15 mm diameter pipe. 18.22.2 20 mm diameter pipe. 18.22.3 25 mm diameter pipe. 18.22.4 32 mm diameter pipe. 18.22.5 40 mm diameter pipe. 18.22.6 50 mm diameter pipe. 990 18.23 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 18.23.1 15 mm diameter pipe. 18.23.2 20 mm diameter pipe. 18.23.3 25 mm diameter pipe 18.23.4 32 mm diameter pipe 18.23.5 40 mm diameter pipe 18.23.6 50 mm diameter pipe 991 18.24 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 18.24.1 15 mm diameter pipe 18.24.2 20 mm diameter pipe 18.24.3 25 mm diameter pipe 18.24.4 32 mm diameter pipe 18.24.5 40 mm diameter pipe 18.24.6 50 mm diameter pipe 18.24.7 65 mm diameter pipe 18.24.8 80 mm diameter pipe 992 18.25 Providing and filling sand all-round the G.I. pipes in external work. 18.25.1 15 mm diameter pipe 18.25.2 20 mm diameter pipe 18.25.3 25 mm diameter pipe 18.25.4 32 mm diameter pipe 18.25.5 40 mm diameter pipe 18.25.6 50 mm diameter pipe 18.25.7 65 mm diameter pipe 18.25.8 80 mm diameter pipe 993 18.26 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 18.26.1 15 mm nominal bore 18.26.2 20 mm nominal bore 18.26.3 25 mm nominal bore 18.26.4 32 mm nominal bore 18.26.5 40 mm nominal bore 18.26.6 50mm nominal bore 18.26.7 65mm nominal bore 18.26.8 80 mm nominal bore 994 18.27 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.27.1 15 mm nominal bore. 18.27.2 20 mm nominal bore. 18.27.3 25 mm nominal bore. 18.27.4 32 mm nominal bore. 18.27.5 40 mm nominal bore. 18.27.6 50 mm nominal bore. 18.27.7 65 mm nominal bore. 18.27.8 80 mm nominal bore. 995 18.28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 996 18.29 Providing and fixing brass bib cock of approved quality 18.29.1 15 mm nominal bore 18.29.2 20 mm nominal bore 997 18.30 Providing and fixing brass stop cock of approved quality : 18.30.1 15 mm nominal bore 18.30.2 20 mm nominal bore 998 18.31 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. 999 18.32 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. 1000 18.33 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore 1001 18.34 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. 1002 18.35 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore 1003 18.36 Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. 1004 18.37 Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. 1005 18.38 Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. 1006 18.39 Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1007 18.40 Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1008 18.41 Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1009 18.42 Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1010 18.43 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.43.1 100 mm diameter 18.43.2 150 mm diameter 18.43.3 200 mm diameter 1011 18.44 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 18.44.1 86 mm long weighing not less than 88 gm 18.44.2 122 mm long weighing not less than 99 gm 18.44.3 165mm long weighing not less than 110 gm 18.44.4 90mm long weighing not less than 93 gm 1012 18.45 Providing and fixing PTMT stop cock of approved quality and colour. 18.45.1 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 18.45.2 20mm nominal bore, 89mm long. Weighing not less than 88 gms. 18.45.3 Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. 1013 18.46 Providing and fixing PTMT pillar cock of approved quality and colour. 18.46.1 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 18.46.2 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. 1014 18.47 Providing and fixing PTMT, push cock of approved quality and colour. 18.47.1 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 18.47.2 15 mm nominal bore, 80mm long weighing not less than 46 gms. 1015 18.48 Providing and fixing PTMT grating of approved quality and colour. 18.48.1 Circular type. 18.48.1.1 100 mm nominal dia. 18.48.1.2 125 mm nominal dia with 25 mm waste hole. 18.48.2 Rectangular type with openable circular lid. 18.48.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating. 1016 18.49 Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. 1017 18.50 Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. 1018 18.51 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.51.1 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 18.51.2 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 18.51.3 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 18.51.4 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 18.51.5 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. 1019 18.52 Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 18.52.1 30cm length. 18.52.2 45 cm length. 1020 18.53 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 18.53.1 15 mm nominal bore.Weighing not less than 32 gms. 18.53.2 20mm nominal bore.Weighing not less than 40gms. 18.53.3 25mm nominal bore.Weighing not less than 62 gms. 1021 18.54 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 18.54.1 80 mm nominal bore 18.54.2 100 mm nominal bore 18.54.3 150 mm nominal bore 18.54.4 200 mm nominal bore 1022 18.55 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 18.55.1 80 mm nominal bore 18.55.2 100 mm nominal bore 18.55.3 150 mm nominal bore 18.55.4 200 mm nominal bore 1023 18.56 Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. 1024 18.57 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. 1025 18.58 Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 1026 18.59 Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 1027 18.60 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.60.1 25 to 40 mm nominal bore 18.60.2 50 to 80 mm nominal bore 1028 18.61 Providing and fixing CP jet assembly to including connection etc complete. 1029 18.62 Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. 1030 18.63 Add extra for additional floor lift beyond 5.0M.height. 1031 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.1.1 100 mm diameter 19.1.2 150 mm diameter 19.1.3 200 mm diameter 19.1.4 230 mm diameter 19.1.5 250 mm diameter 19.1.6 300 mm diameter 1032 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 19.2.1 100 mm diameter S.W. pipe 19.2.2 150 mm diameter S.W. pipe 19.2.3 200 mm diameter S.W. pipe 19.2.4 230 mm diameter S.W. pipe 19.2.5 250 mm diameter S.W. pipe 19.2.6 300 mm diameter S.W. pipe 1033 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 19.3.1 100 mm diameter S.W. pipe 19.3.2 150 mm diameter S.W. pipe 19.3.3 200 mm diameter S.W. pipe 19.3.4 230 mm diameter S.W. pipe 19.3.5 250 mm diameter S.W. pipe 19.3.6 300 mm diameter S.W. pipe 1034 19.4 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) 19.4.2 160 mm diameter OD (min. wall thickness 4.0mm) 19.4.3 200 mm diameter OD (min. wall thickness 4.9mm) 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) 1035 19.5 Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 19.5.1 110 mm diameter PVC. pipe 19.5.2 160 mm diameter PVC. pipe 19.5.3 200 mm diameter PVC. pipe 19.5.4 250 mm diameter PVC. pipe 19.5.5 300 mm diameter PVC pipe 1036 19.6 Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 19.6.1 110 mm diameter PVC. pipe 19.6.2 160 mm diameter PVC. pipe 19.6.3 200 mm diameter PVC. pipe 19.6.4 250 mm diameter PVC. Pipe 19.6.5 300 mm diameter PVC pipe 1037 19.7 Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks 19.7.1.2 With Sewer bricks conforming to IS : 4885 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks 19.7.2.2 With sewer bricks conforming to IS : 4885 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks 19.7.3.2 With Sewer bricks conforming to IS : 4885 1038 19.8 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 19.8.1 100 mm dia. R.C.C. pipe 19.8.2 150 mm dia. R.C.C. pipe 19.8.3 250 mm dia. R.C.C. pipe 19.8.4 300 mm dia. R.C.C. pipe 19.8.5 450 mm dia. R.C.C. pipe 19.8.6 500 mm dia. R.C.C. pipe 19.8.7 600 mm dia. R.C.C. pipe 1039 19.9 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks 19.9.1.2 With Sewer bricks conforming to IS : 4885 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 19.9.2.1 With well burnt bricks 19.9.2.2 With Sewer bricks conforming to IS : 4885 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : 19.9.3.1 With well burnt bricks 19.9.3.2 With Sewer bricks conforming to IS : 4885 1040 19.10 Extra for depth for manholes 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks 19.10.1.2 With Sewer bricks conforming to IS : 4885 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks 19.10.2.2 With Sewer bricks conforming to IS : 4885 1041 19.11 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 19.11.1 With well burnt bricks 19.11.2 With Sewer bricks conforming to IS : 4885 1042 19.12 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m 19.12.1 With well burnt bricks 19.12.2 With Sewer bricks conforming IS : 4885 1043 19.13 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) 19.13.1 With well burnt bricks 19.13.2 With Sewer bricks conforming IS : 4885 1044 19.14 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : 19.14.1 With well burnt bricks 19.14.2 With Sewer bricks conforming IS : 4885 1045 19.15 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.15.1 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.15.1.1 With well burnt bricks 19.15.1.2 With Sewer bricks conforming IS : 4885 1046 19.16 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : 19.16.1 With well burnt bricks 19.16.2 With Sewer bricks conforming IS : 4885 1047 19.17 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 19.17.1 With 20x20 mm square bar 19.17.2 With 20 mm diameter round bar 1048 19.18 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 1049 19.19 Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): 19.19.1 With 20x20 mm square bar 19.19.2 With 20 mm diameter round bar 1050 19.20 Supplying and fixing C.I. cover without frame for manholes : 19.20.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 19.20.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 19.20.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. 1051 19.21 Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality 19.21.1 Light duty D- 2.5 19.21.1.1 Rectangular shape 600x450mm internal dimensions 19.21.1.2 Square shape 450mm internal dimensions 19.21.1.3 Circular shape 450mm internal diameter 19.21.2 Medium duty - 10 19.21.2.1 Square shape 450mm internal dimension 19.21.2.2 Circular shape 500mm internal diameter 19.21.3 Heavy duty D - 20 19.21.3.1 Circular shape 560 mm internal diameter 19.21.4 Extra Heavy Duty - 35 19.21.4.1 Circular shape 560 mm internal dia. 1052 19.22 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. 1053 19.23 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 19.23.1 For pipes 100 to 230 mm diameter 19.23.2 For pipes 250 to 300 mm diameter 19.23.3 For pipes 350 to 450 mm diameter 1054 19.24 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 19.24.1 100 mm dia. sand cast iron drop connection 19.24.2 150 mm dia. sand cast iron drop connection 1055 19.25 Extra for depths beyond 60 cm of sand cast iron drop connection complete : 19.25.1 For 100 mm dia. sand cast iron drop connection 19.25.2 For 150 mm dia. sand cast iron drop connection 1056 19.26 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : 19.26.1 Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 19.26.2 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 19.26.3 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 19.26.4 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 1057 19.27 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With well burnt bricks 19.27.2 With fly ash bricks 100 key/cm2 strangth 1058 19.28 Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With well burnt bricks 19.28.2 With fly ash bricks 100 kg/cm2 strength 1059 19.29 Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : 19.29.1 With well burnt bricks 19.29.2 With fly ash bricks 100 kg/cm2 strength 1060 19.30 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.30.1 With well burnt bricks 1061 19.31 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. 1062 19.32 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 19.32.1 100 mm dia 19.32.2 150 mm dia 1063 19.33 Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.33.1 100 mm dia 19.33.2 150 mm dia 19.33.3 200 mm dia 19.33.4 230 mm dia 19.33.5 250 mm dia 19.33.6 300 mm dia 1064 19.34 Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.34.1 100 mm dia. Half round R.C.C. pipe 19.34.2 150 mm dia. Half round R.C.C. pipe 19.34.3 250 mm dia. Half round R.C.C. pipe 19.34.4 300 mm dia. Half round R.C.C. pipe 1065 19.35.1 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 19.35.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 19.35.3 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 1066 19.36 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1067 19.37 Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1068 19.38 Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. 1069 19.39 Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1070 19.40 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1071 19.41 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1072 19.42 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1073 19.43 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1074 19.44 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1075 19.45 Deduct for not providing and installing FRP/GRP manhole cover size 19.45.1 900mmx450mm (weight of cover 43.76kg ± 10%) 19.45.2 450mmx600mm (weight of cover 14.2kg ± 10%) 19.45.3 300mmx300mm (weight of cover 4.1kg ± 10%) 19.45.4 600mm (weight of cover 41.78kg ± 10%) 19.45.5 500mm (weight of cover 43.1kg ± 10%) 1076 19.46 Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 19.46.1 100 mm dia to 110 mm dia 19.46.2 150 mm dia to 160 mm dia 19.46.3 200 mm dia 19.46.4 250 mm dia 19.46.5 300 mm dia 1077 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. 1078 21.2 Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 21.2.2 Pre-laminated particle board with decorative lamination on both sides. 1079 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1080 21.4 Add extra for providing and fixing froasted glass instead of float glass 21.4.1 With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.4.2 With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.4.3 With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1081 21.5 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness 21.5.2 With brass cover plate - minimum 1.25 mm thickness. 1082 21.6 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). 1083 21.7 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. 1084 21.8 Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : 21.8.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.8.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) 1085 21.9 Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width 1086 21.10 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators 1087 21.11 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. 1088 21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. 21.12.1 Anodized (AC 15 ) aluminium tubular handle bar 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. 21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. 1089 21.13 Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 1090 21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). 1091 21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. 21.15.1 Anodized (AC15) aluminium 21.15.2 Powder coated minimum thickness 50 micron aluminium. 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium. 1092 21.16 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge 21.16.1 Anodized (AC15 ) aluminium 21.16.2 Powder coated minimum thickness 50 micron aluminium 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. 1093 21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). 1094 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). 1095 21.19 Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1096 21.20 Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1097 21.21 Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. 1098 21.22 Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. 1099 21.24 Extra for froasted glass (with eching film) in item No. 21.22 1100 22.1 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. 1101 22.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. 1102 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) 1103 22.4 Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) 22.4.1 Serrated with central bulb (225mm wide, 8- 11mm thick). 22.4.2 Dumb bell with central bulb (180mm wide, 8mm thick). 22.4.3 Kickers (320mm wide, 5mm thick). 1104 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 1105 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. 1106 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. 1107 22.8 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. 1108 22.9 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). 1109 22.10 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). 1110 22.11 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) 1111 22.12 Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. 1112 22.13 Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. 1113 22.14 Grading roof for receiving water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) 22.14.3 Cement mortar 1:4 (1cement : 4 sand) 1114 22.15 Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) 1115 22.16 Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). 1116 22.17 Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). 1117 22.18 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). 1118 22.19 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) 1119 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). 1120 22.21 Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] 1121 22.22 Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) 1122 22.23 Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. 1123 22.24 Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. 1124 22.25 Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. 1125 22.26 Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. 1126 22.27 Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). 1127 22.28 Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. 1128 22.29 Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. 1129 22.30 Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge 1130 22.31 Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. 22.31.1 For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 22.31.2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 1131 22.32 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1132 22.33 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.33.1 For vertical surface two coats @ 0.70 kg per sqm 22.33.2 For horizontal surface one coat @1.10 kg per sqm. 1133 22.34 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. 1134 22.35 Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. 22.35.1 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. 22.35.2 For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) 1135 22.36 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1136 22.37 Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. 1137 23.11 Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. 1138 23.12 Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. 1139 23.13 Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. 1140 23.14 Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc 1141 23.15 Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. 1142 24.8 Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. 1143 24.9 Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. 24.9.1 Providing and fixing insulation with resin bonded Glass wool 24.9.2 Providing and fixing insulation with resin bonded Rock wool 1144 24.11 Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1145 24.12 Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : 24.12.1 Ridges plain (500 - 600mm). 24.12.2 Flashings/ Aprons.( Upto 600 mm) 24.12.3 North light curves. 24.12.4 Barge board (Upto 300 mm). 24.12.5 Crimp curve 24.12.6 Gutter. (600 mm over all girth). 1146 25.1 Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) 1147 25.2 Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 1148 25.3 Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) 1149 25.4 Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 1150 25.5 Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.3 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 1151 25.6 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) 1152 25.7 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 1153 25.8 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.8.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) 1154 25.9 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) 1155 25.10 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) 1156 25.11 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) 25.11.2 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) 25.11.3 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) 1157 25.12 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) 1158 25.13 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) 1159 25.14 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. 25.14.1 White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) 1160 25.15 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) 1161 25.16 Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) 1162 25.17 Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) 1163 25.18 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) 1164 25.19 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) 1165 25.20 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) 1166 25.21 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) 1167 25.22 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) 1168 25.23 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) 1169 25.24 Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) 1170 25.25 Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1171 25.26 Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) 1172 25.27 Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1173 25.28 Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1174 25.29 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1175 25.30 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) 1176 25.31 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) 1177 25.32 Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) 1178 25.33 Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1179 25.34 Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) 1180 25.35 Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1181 25.36 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) 1182 25.37 Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) 1183 25.38 Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) 1184 25.39 Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) 1185 25.40 Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) 1186 25.41 Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) 1187 25.42 Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) 1188 25.43 Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1189 25.44 Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1190 25.45 Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) 1191 25.46 Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) 1192 25.47 Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) 1193 25.48 Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) 1194 25.49 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) 1195 25.50 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) 1196 25.51 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) 1197 25.52 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) 1198 25.53 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) 1199 25.54 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) 1200 25.55 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) 1201 25.56 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) 1202 25.57 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) 1203 25.58 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) 1204 25.59 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) 1205 25.60 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) 1206 25.61 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) 1207 25.62 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) 1208 25.63 Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) 25.63.4 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) 25.63.5 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) 1209 25.64 Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) 1210 25.65 Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1211 25.66 Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1212 25.67 Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.67.1 Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) 25.67.2 Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) 25.67.3 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1213 25.68 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1214 25.69 providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. 1215 25.70 Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1216 25.71 Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) 1217 25.72 Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1218 25.73 Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1219 25.74 Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1220 25.75 Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1221 25.76 Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1222 25.77 Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) 1223 25.78 Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1224 25.79 Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1225 25.80 Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1226 25.81 Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1227 25.82 Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) 1228 27.4 Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1229 27.5 Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1230 27.6 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. 1231 27.7 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. 1232 27.8 Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. 1233 27.10 Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. 1234 27.11 Extra for every additional height of 0.3 m up to height of wall 3 m 1235 28.35 Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. 1236 28.36 Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. 1237 28.37 Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. 1238 28.38 Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. 1239 29.1 Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) 29. 1.1 Upto 1 Hectare 29.1.2 1 Hectare to 2 Hectare 29.1.3 Add extra for each additional one Hectare or part there off 29.1.4 Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. 1240 29.2 Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. 1241 29.3 Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. 1242 29.4 Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). 1243 29.5 Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) 1244 29.6 Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. 29.6.1 Up to 100km (both way) 29.6.2 Add extra for distance beyond 100km and upto 150km. (both way) 29.6.3 Add extra for every additional km beyond 150km (both way) 1245 29.7 Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. 1246 29.8 Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. 1247 29.9 Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. 29.9.1 First time design work 29.9.1.1 Built up area upto 500 sqm 29.9.1.2 Built up area more than 500 sqm and upto 3000 sqm 29.9.1.3 Built up area more than 3000 sqm. 29.9.2 Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) 29.9.2.1 Plinth area upto 500 sqm 29.9.2.2 Plinth area more than 500 sqm and upto 3000 sqm 29.9.2.3 Plinth area more than 3000 sqm 1248 29.10 Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). 1249 29.11 Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Madhya Pradesh View Result →
6.
Defence #9609235 AOC
Tender For Additional / Alternator To Bldg. No P-51 (Or Md Accn), Provision Of Main Lt Panel With Three Phase Energy Meter In Dd Line And Provision Of 01 X Toilet Bathroom In Adm Area At Mil Stn Yol.; 1 Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, complete all as specified and directed. 2 Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, complete all as specified and directed. 3 Pressed steel frames of size 105x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed. 4 Pressed steel frames of size 125x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed. 5 PCC M-10, nominal mix, C-0, using 12.5mm graded mechanically crushed stone aggregate as in filling in door frame and mass concrete, complete all as specified and directed. 6 Flush door shutters 35mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and directed by Engr-In-Charge. 7 Factory made 2nd class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified and directed. 8 Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter (for glass and wire gauge)ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thickincluding cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 Nos for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel butt hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07. Make : As per Appendix C. Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day. 9 M&L WPC (Wood Polymer Composit) Double Prelam Door Frame (Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheetC shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long L brackets of 19 x 19 mm MS square, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm MS square Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. complete as per manufactures specification & direction of engineer-in charge. 10 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm (5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufactures specification and drawing. 11 Sheet glass 3mm thick ordinary quality and glazingwith oil putty/aluminium beads in squares, not exc. 0.5 Sqm in each pane, complete all as specified and directed. 12 Figured glass, pin head type3mm thick and glazing with oil putty in squares n exc 0.5 Sqm in each pane, complete all as specified and directed. 13 Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks of glavanised wire staple fixed with stainless steel wire staples, fixed, complete all as specified and directed. 14 Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed. 15 Extruded aluminium alloy handles (ISI marked, fabricated type, anodised, of size 150mm, complete all as specified and directed. 16 Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 200mm, fixed, complete all as specified and directed. 17 Butt hinges (ISI marked), medium weight, cold rolled, mild steel 100mm long, complete all as specified and directed. 18 Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match, complete all as specified and directed. 19 Ordinary rat tail rod pattern springs 300mm, including roller and roller plate complete all as specified and directed. 20 S&F for Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size all as specified. 21 Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed. 22 2nd classhard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as as specified and directed. 23 Prelaminted particle board 18/19mm thick interior grade prelaminated both side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber frame work as on wall panelling cup boards shutters/shelves (sliding or fixed), complete all as specified and directed. 24 Extra over rates of 18/19mm thick block board or veneered particle board/ prelaminated board for external teak wood lipping, 6mm thick fixed with nails, complete all as specified and directed. 25 Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm, complete all as specified and directed. 26 Extruded aluminium alloy handles (ISI marked), fabricated type, anodised, of size 75mm, complete all as specified and directed. 27 Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. 28 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed. 29 Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed. 30 Non skid, Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. 31 Non skid, Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. 32 Non skid, Premium class Igrade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, as in skirting, dado etc . set and jointed in neat cement slurry and includingincluding 10mm thick rendering in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, complete all as specified and directed. 33 Glazed coloured tiles of size 450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:3 (1 cement : 3 coarse sand), complete all as specified and directed. 34 Machine cut kota stone slab flooring 18-20mm thick of size not less than 550 mm X 550mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC sub base, complete all as specified and directed. 35 Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. 36 Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as inflooring, 25mm thick, surface finished even and rough to receive top finish or chamfering of RCC chajja with proper slope to drain off storm water surface, complete all as specified and directed. 37 Plain cement concrete M-10, nominal mix, type C-2, using 40mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5cm deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. Note:- The unit rate include for use of form work (straight or curved). 38 Demolition of cement concrete (un-reinforced) of any description and any position not otherwise specifically provided for, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. 39 Plain cement concrete 1:5:10, nominal mix, type E-2, using 40mm graded mechanically crushed stone aggregate as in sunken floors, filling and mass concrete, complete all as specified and directed. 40 Water proofing treatment of sunken floor using SHALIURETHANE- BTD OF STP MAKE OR EQUIVALENT as approved by GE, high solid content single component water based liquid applied elastomeric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 1.5mm, having solid content of more than 80% elongation of 500+(-) 50%, laid over reinforcing layer on non woven geo-textile mesh of 40/50, 50 gms, including applying self primer coat by diluting with 1:1 ratio @ 0.4 kg per sqm and surface including 10 mm thick 1:3 plaster including cleaning of existing treatment complete all as specified and directed 41 Rendering cement plaster 10mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers ( 5mm thick first layers and 5mm thick 2nd layer) mixed with WPC @ 3% weight of cement on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and as directed by Engr-In-Charge. 42 Plain cement concrete M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate as in sunken floor, 25mm thick, surface finished even and fair, complete all as specified and directed. 43 Mild steel galvanized iron water tubing 32mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. as in spout of sunken floor, including taking down old pipe, complete, all as specified and directed. 44 75mm thick Plain cement concrete M-10 nominal mix, C-2, using 40mm graded mechanically crushed stone aggregate as in sub base flooring, complete all as specified and directed. 45 Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. 46 Dismantling stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc.including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. 47 Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided for, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. 48 TMT steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 49 TMT steel bars 5 to 10mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips as in stirrups, spacers and binders, complete all as specified and directed. 50 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)etc. for fair finished flat surfaces of concrete, complete all as specified and directed. 51 Marble 18 to 20mm thick, green marble, (table rubbed and polished and moulding of outer edges) as in kitchen cooking platform /shelf and verticle surfaces duly machine cut in skirting /dado and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade green marble type, complete all as specified and directed. 52 Reinforced cement concrete, M-15 (Nominal mix), type B-1, (with 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including formwork, complete all as specified and directed. 53 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations 54 Dismantling and breaking up PVC drain pipes 75/110mm dia, fixed to walls, laid in floors or in trenches and removal of demolished materials from the site, complete all as specified and directed. 55 PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, fixed, complete all as specified and directed. 56 PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors, trenches, of bore 110mm, complete all as specified and directed. 57 PVC (SWR) pipes single socketed, in any length with rubber ring joints, in floors, trenches, of bore 75mm, complete all as specified and directed. 58 PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with adjustable clamps of bore 110mm, complete all as specified and directed. 59 PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with adjustable clamps of bore 75mm, complete all as specified and directed. 60 PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, provided with oval access door, fixed in repair, complete all as specified and directed. 61 PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, provided with oval access door, fixed in repair, complete all as specified and directed. 62 PVC (SWR) bends any radius, 110mm bore jointed with solvent cement (fitted with or without oval access door), fixed in repair, complete all as specified and directed. 63 PVC (SWR) bends any radius, 75mm bore jointed with solvent cement (fitted with or without oval access door), fixed in repair, complete all as specified and directed. 64 PVC (SWR) vent cowl 110mm bore fixed in repair, complete all as specified and directed 65 Rotational moulded polyethylene water storage tank 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including PVC float ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, complete including taking down old tank and removng to store all as specified and directed. 66 Brass chromium plated Wall mixer with provision of long bend pipe with connecting legs and wall flanges screwed down for iron pipe and fixed, complete all as specified and directed. Make:Cat. No.: F2002401 of CERA orequivalent in makes specified in Appendix C. 67 Brass CP sink mixer swan neck for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. Make:Cat. No.: F1020501of CERA or equivalent in makes specified in Appendix C. 68 Chromium plated centre hole Mixer for Wash hand basin for mixing hot or cold water with 450mm braided connection pipe (without pop-up) screwed for iron pipe, complete all as specified and directed.Make:Cat. No.: F12002461 of CERA or equivalent in makes specified in Appendix C. 69 Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with Cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-1 using 20mm graded crushed stone aggregate and making connection to trap complete all as specified, fixed in repair, complete all as specified and directed. Cat. No.: CABLE 3020105of CERA or equivalent in makes specified in Appendix C 70 Supply and fixed in repair PVC valveless, crystal white, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handlewith brackets including 32mm dia PVC long bend flush pipe 90cm long snd 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed, complete all as specified and directed. 71 Wash basins, Vitreous China of size 450mmx300mm, crystal white and including cutting for and pinning on ends of brackets, excluding tap, waste, chain & plug but including brackets fixed in repair, complete all as specified and directed. 72 Polyethlene and unplastcised PVC pipe, 32mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm all as specified and directed. 73 Sink with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connectingunion to pipe, including 40mm dia waste pipe & CP waste coupling, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, Cat No Blue Star SSSB-52 Silver Shine or overall size 940mm x 455mm of make Cera (cat No B4622101- Gloss finish Diana Lite)fixed in repair complete all as specified and directed. 74 Sheet glass shelf assembly 55cm long consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, selected quality as approved by GE, fixed in repair, complete all as specified and directed. 75 Chromium plated brass shower rose, fancy type (as approved by GE/Engr-In-Charge), 125mm size with shower arm, chromium plated, 195mm longh with bend of 45 degree with flange suitable for 15mm bore pipe with or without swivel joint fixed to pipe, Make : Cat. No.: F7020306ABof CERA or equivalent in makes specified in Appendix C fixed in repair, complete all as specified. 76 Angle/stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle,screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed. Make : Cat. No.: F2002201of CERA or equivalent in makes specified in Appendix C 77 Stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs, complete all as specified and directed. Make : Cat. No.: F4060103 (Concealed part & F2002751 (Exposed part)of CERA or equivalent in makes specified in Appendix C 78 600mmx450mm bevelled edge looking mirror of selected quality with 6mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repair, complete all as specified and directed. 79 Bib taps, fancy type 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed.Make : Cat. No.: F2002151of CERA or equivalent in makes specified in Appendix C 80 PVC connection 15mm size with PTMT nuts at both end 600mm long, complete all as specified and directed. 81 32mm or 40mm Waste coupling, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair, complete all as specified and directed. 82 Soap dish, chromium plated, fixed to plugs with chromium plated, brass screws, fixed in repair, complete all as specified and directed.Make : Cat. No.: F5003106of CERA or equivalent in makes specified in Appendix C 83 Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) and fixed in repair, complete all as specified and directed. 84 Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. 85 Rendering cement plaster 20mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on internal fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. 86 Rendering cement plaster 20mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers on fair faces of brick or stone walls finished even and smooth without using extra cement, mixed with WPC, complete all as specified and directed.Note : Supply only Water proofing compound shall be measured and paid for seperately. 87 Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. 88 Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over & including 2mm thick wall care putty, complete all as specified and directed. 89 Preparation of old treated plastered surface of wall by complete removal of existing treatment and applying two coats of oil bound distemper over & including 2mm thick wall care putty, complete all as specified and directed. 90 Preparation of new plastered or unplastered surfaces of wall to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed. 91 Preparation of old plastered or unplastered surfaces of wall including complete removal of existing treatment and finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed. 92 Material and Labour for waterproofing of exterior walls, including complete removal of existing plaster including raking out joints and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k). The treatment shall be done from ground level and providing 15mm thick cement plaster in CM 1:4 finished even and smooth all as directed. Make: ASIAN PAINTS/BERGER/NEROLAC 93 Preparation of new plastered surfaces of ceiling with 2mm thick wall care putty and applying one coat of oil bound distemper, complete all as specified and directed. 94 Preparation of old treated plastered surfaces of ceiling by complete removal of existing treatment, applying 1mm thick layer of wall care putty where required and one coat of oil bound distemper, complete all as specified and directed. 95 Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick cement rendering in two layers of 10mm each (top/final layer shall be rendered after final setting of under layer) in CM 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs ect, complete all as specified and directed. 96 Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. 97 Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. 98 Taking up or down 25 mm to 32mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. 99 Supplying and laying of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 100 Supplying and laying of CPVC pipes 32mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 101 Tank Adaptor CPVC pipes of 32mm dia SDR 11 & Plain CPVC SDR 11 all as specified and directed. 102 Union for pipes of CPVC 20mm dia SDR 11 & Plain CPVC SDR 11 all as specified and directed. 103 Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipes of 20mm dia SDR 11 & Plain CPVC SDR 11 all as specified and directed. 104 Brass Elbow for pipes of CPVC 20mm dia SDR 11 & Plain CPVC SDR 11 all as specified and directed. 105 Brass Elbow reducer (3/4 X ½) for CPVC pipes of 20mm dia SDR 11 & Plain CPVC SDR 11 all as specified and directed. 106 Brass Tee for pipes of CPVC 20mm dia SDR 11 & Plain CPVC SDR 11 all as specified and directed. 107 Taking up or down 25 mm to 32mm bore, steel tubing and connections, including cleaning for refixing or removal from site and refixing on same or new position complete all as specified and directed. 108 Supply only intergal water proofing compound, complete all as specified and directed. 109 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed. 110 Plain cement concrete M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as in lintels upto 1.50 metre clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, chamfered angles and throating, complete all as specified and directed.Note :- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. 111 Plain cement concrete M-10 nominal mix, type C-1 using 20mm graded mechanically crushed stone aggregate as in surface channel and drains, complete all as specified and directed. 112 Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches, pillars, including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and directed. 113 Walling random rubble masonry with best quality locally available stone, uncoursed, well bonded, bedded, solidly hearted and built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. 114 All as per item No. 113 above but except stone. 115 Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. 116 Brick work with old sizefly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. 117 S&F in repair 25mm dia powder coated mild steel, chromium plated curtain rod including brackets, complete all as specified and directed. 118 Rolled sections as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240s, steel work, complete all as specified and directed. 119 Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290 Gde E-165, steel work, complete all as specified and directed. 120 S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 121 S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 122 Preparetion of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. 123 Plain cement concrete 1:4:8, type D-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed. 124 Reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, all as specified. 125 Reinforced cement concrete 1:2:4 type B-1, ( using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, all as specified. 126 Reinforced cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintel over 1.50m span, complete all as specified and directed. Note:- Reinforcement and form work shall be measured and paid separately. 127 Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for roughly finished flat surfaces of concrete, all as specified 128 Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for roughly finished flat surfaces of concrete, all as specified. 129 Formwork to sides of pillars, posts, struts, piers, columns and stanchions, for roughly finished square,rectangular or polygonal surfaces of concrete, all as specified. 130 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. For fair finished flat surfaces of concrete, complete all as specified and directed. 131 Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. 132 Hardcore of broken stone or boulders of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed. 133 Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on internal fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. 134 Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers on fair faces of brick or stone walls finished even and smooth without using extra cement, mixed with WPC, complete all as specified and directed.Note : Supply only Water proofing compound shall be measured and paid for seperately. 135 Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat ofchalk whitening, complete all as specified and directed. 136 Applying two coats of cement base paint on newly plastered or previously undecorated wall surfaces over one coat of alkali based primer including preparation of surface, tint and shade as approved by Engr-in-Charge, complete all as specified and directed. 137 Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete, all as specified 138 Vitreous China wash down water closet (pedestal pattern), white including traps, connection to drain or outgoing pipe, anti-syphonage pipe complete including necessary fittings, fixed, complete all as specified and directed. 139 Wash basins, Vitreous China (Flat back) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450mm long PVC connections 15mm size long with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia, chain and plug, porcelain stopper, and fixed, complete all as specified and directed. 140 Brass Chromium Plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified. 141 Rotational moulded polyethylene water storage tank 500 Ltrs capacity (cylindrical vertical with closed top) three layer, hoisted and fixed in position including PVC float ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, complete all as specified and directed. 142 Gun metal, globe or gate valves, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed complete, all as specified. 143 Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed. 144 Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor, complete all as specified and directed. 145 S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms, complete all as specified. 146 Damp proof course 25mm thick cement mortar 1:2 to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed by Engr-In-Charge. 147 Factory made solid PVC Door/window/ventilator Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges shall be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 180 of MES SSR 2020 Part-II, complete all as specified and directed. 148 Factory made fully glazed PVC (frosted/ground/obscured) window/ventilator shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; complete all as specified and directed.Note:- Glass gauges inclusive of quoted rates. 149 Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as specified and directed. 150 Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, fixed, complete all as specified and directed. 151 Chromium plated over headshower rose, 150mm x 150mm size square shape single flow suitable for 15mm bore pipe with rapid cleaning system, complete all as specified 152 Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed. 153 Taking down submain wiring any type and any size and making good disturbed surface by using cement mortar, white cement, putty etc. and match with existing surfaces of walls, floors etc., complete all as specified and as directed. 154 Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. 155 M & L for point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and includingconcealed PVC conduit(ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable sizeincluding concealedMS pressed steel (Modular sunken box) terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and Modular cover plate as top cover (ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/Exhaust fan point controlled by one switch, complete all as specified and directed. Note : i)Wiring Colour code i.e. Red/Yellow/Bluefor Phase, Black for neutral and Green for earth shall be maintained.ii) Rate of cutting chases, cement plaster, white wash and making surface good as existing surface included in quoted rate.iii) Point wiring is considered for Modular Switches and sockets. Rate of Metallic Sunken box and modular sheet cover plate and other connected accessories required for modular point wiring included in quoted rate.iv) Rate of modular switch and sockets will be paid seperately under relevant item. 156 All as per serial item No 155 above, but for ceiling fan/ exhaust fan/ wall fan controlled by one switch 6 Amp, SP, ony way, 240V, complete all as specified and directed. 157 All as per serial item No 155 above, but for one 3 pin 5 Amps socket outlet on the independent board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed. 158 All as per serial item No 155 above, but for one 3 pin 5 Amps socket outlet on the same board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed. 159 All as per serial item No 155 above, but for bell/buzzer point controlled by one bell push, 240 volts, complete all as specified and directed. 160 All as per serial item No 155 above, but for one light point controlled by two way switches, complete all as specified and directed. 161 All as per serial item No 155 above, but for 5 pin 15 amps socket out let on independentwith 2.50 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.50 Sqmm stranded copper conductor cable as continuous earth wire, complete all as specified and directed. 162 S & F for modular switch 6A one way, single module, complete all as specified and directed. 163 S & F for modular switch 16A one way 16A one way with indicator, single module, complete all as specified and directed. 164 S & F for modular bell push 6A, single module, complete all as specified and directed. 165 S & F for modular switch two way 6A, single module, complete all as specified and directed. 166 S & F for modular socket for 6A 2/3 pin combined, 2 module, complete all as specified and directed. 167 S & F for modular socket for 6A/16A 3 pin combined, 2 module, complete all as specified and directed. 168 S & F infor lamp holder polycarbonate body (Metal ring) with back bakelite plate suitable for batten fittings, complete all as specified and directed. 169 M & L for ceiling rose 65 x 50mm three terminals, fixed, complete all as specified and directed. 170 Supply and fixing electronic bell ding-dong AC 230 Volts single pole, complete all as specified and diercted. 171 Supply and fiximgr Switch piano6 A SP 230 Volts 2 way, complete all as specified and directed. 172 S&F Socket outlet 2 in 1, 3 pin 6 Amps Flush type, complete all as specified and directed. 173 S&F Switch Socket combination outlet 2 in 1, 3/5 pin 5 and 15 Amps flush type, complete all as specified and directed. 174 Taking down carefully ceiling fan/exhaust fan any size/make with cable and all accessoreis removing from site to store for repair/overhaulling, complete all as specified and diercted. 175 Supply and fixed high speed stepped type electronic fan regulator 120W, 230 volts, complete all as specified and directed. 176 Dismantling of ceiling fan 1200mm sweep, removing burnt winding and Material and labour for rewinding the same with supper enamelled copper wire of existing size, gauge and turns including cleaning the slots properly and testing, complete all as specified and diercted. 177 Material and labour for one coat of synthetic enamel paint in situ by spray machine of ceiling fans any size/any make complete including filling cavities with filler, cleaning all dust etc and writing MES Nos, complete all as specified and diercted. 178 Supply & fixing bearing of ceiling fan 1200mm sweepas per existing bearing including necessary greasing, complete all as specified and directed. Make:-NBC/SKF/FAG/Norma 179 Supply & fixing in repair pair of three blades of 1200mm sweep ceiling fan, complete all as specified and directed. 180 Supply & fixing in repair top and bottom canopy of plastic with steel screw suitable for rod for fan of 1200/ 1400mm sweep, complete all as specified and directed. 181 Supply & fixing in repair down rod 15mm bore, 600mm long fixed one end with mild steel U clamp, nut, lockable bolt, rubber reel, lock pin and other end having threaded/ drilled hole end, suitable nut, bolt, split pin and check nut or aluminium clamp duly white painted suitable for all size and makes of ceiling fan, complete all as specified and directed. 182 Hanging only ceiling fan after checking serviceability of safety pins, clamps, rubber bushes, nuts, bolt, canopy and electric connections, making connections with fan including provision of cable for connection, complete all as specified and as directed by Enge-In-Charge. 183 M&L for painting with one coat of synthetic enamel paint (black) using spray machine painting on the surface of exhaust fan of size upto 300mm sweep (including louvers and other parts of exhaust fan) complete after preparation of surface i.ecleaning, washing of surfaces filling cavities with filler, cleaning dust and dirt, complete all as specified and directed by Engr-in-Charge. 184 Dismantling of exhaust fan 300mm sweep, removing the burnt winding and Material and labour for rewinding the same with supper enamelled copper wire of existing size, gauge and turns including cleaning the slots properly and testing, complete all as specified and diercted. 185 Supply & fixing in repairofsteel blade suitable for exhuast fan upto 300mm/600mm sweep, complete all as specified and directed. 186 Fixing only exhaust fan of any size/make upto 600mm sweep after checking serviceability of nuts, bolt and electric connections, making connections to fan including provision of cable for connection, complete all as specified and as directed by Enge-In-Charge. 187 Supply and fixing in replacement of unserviceable condenser ISI marked 2.5 mfd, complete all as specified and diercted. 188 Supply and fixing in replacement of unserviceable condenser ISI marked 3.15 mfd, complete all as specified and diercted. 189 Supply and fixing for AC Ceiling Fan, single phase, 230 volts, 1200 mm sweep includinggrouting the ragged bolts in wall, fixing the frame on the exhaust side and connecting up with PVC insulated three core 1.50 sqmm copper cable from ceiling rose to exhaust fan, complete all as specified and diercted. 190 Supply and fixing for AC exhaust fans, Steel body, with louver shutter, single phase, 230 volts, 50 Hz, 1200 RPM, copper winding 300 mm sweep including grouting the ragged bolts in wall, fixing the frame on the exhaust side and connecting up with PVC insulated three core 1.50 sqmm copper cablefrom ceiling rose to exhaust fan, complete all as specified and diercted. 191 Taking down carefully storage type water heaters (Geyser) of any type and make of capacity upto 50 litres, after disconnecting their electrical and water connections.De-scaling the inner container, heating element, base assembly using diluted hydrochloric acid and cleaning thoroughly.Filling the inner container with water and detecting leakage including brazing as required to stop the leakage, if any, reassembling the geysers after replacing the u/s spare parts, filling water and testing the geysers by applying pressure by means of hand/foot operated pump, to ensure leak proof. Refixing geyser in the same original position/location and making the electrical/water supply connections incl testing on completion, complete all as specified and diercted. (Note : Items required to be replaced will be measured and paid separately under relevent items of the Schedule) 192 Supply and fixing Geyser Indicating lamp as per sample, complete all as specified and diercted. 193 Supply and fixing Thermostat rod suitable for Geyser 25/35/50 ltr, complete all as specified and diercted. 194 Supply and fixingGeyser Element 1000/1500 Watt. Make:Remson/Microking, complete all as specified and diercted. 195 Supply and fixing Geyser connection pipe 12/18 long with sockets on both ends, made of steel, complete all as specified and diercted. 196 Material and labour for Apparatus plate suitable for 25/35/50 ltr geyser all as per sample, complete all as specified and diercted. 197 Material and labour for painting of geyser of any size at site, white in colour including removing and refixing in its original or any other position properly, complete all as specified and diercted. 198 Supply only with replacement of inner container fabricated out of copper plate of 1.3 mm thick as per the existing size and suitable for up to 50 lts capacity vertical type geyser of any make as per the existing, complete all as specified and diercted. 199 S&F in replacement, insulating materials (new glass wool) fixed/punned properly in existing geysers of capacities 25 to 50 ltrs, complete all as specified and diercted. 200 M & L forLED tube light fitting 20 watt, 6000 K, 220 volt, decoarative type complete with driver, holders, and LED tube of 20 watt complete with all accessories internally pre wired battenincluding connecting up with three core twisted flexible copper conductor cable ofsuitable size from ceiling rose to connector of light fitting including mounted on PVC square block, complete all as specified and diercted. 201 M & L forLED light fitting mirror type with high output diffuser 2 feet, 10 watt, 6000 K, 220 volts, AC decorative type with extruded polycarbonate having efficiency 120 lumens /watt with driver holder including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and diercted. 202 S&F in repairLED tube light fitting inverter type 1x 20 W, 230V, LEDtube light fitting, 4 batten shatter resistant cool day white, environment friendly, energy efficient ready to use completewith all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincluding dismantling of unserviceable tube light, complete all as specified and directed. 203 Supply and fixing 12 Watt Led Bulb, 6500K, 2000lm, 230 volts, 50Hz, complete all as specified and diercted. 204 Supply and fixing LED security light of capacity 45 watt, 230 volts, 5700K, housing made of die cast aluminum with street optic lens with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.50 sqmm from ceiling rose to security light drawn through GI light grade security light bracket not less than 1.50 mtrs in length alongwith fixing on wall, complete all as specified and diercted. 205 S&F LED tube light fitting integral type 1x 10 W,230V, ultra slim square profile LED lighting fixture with extruded polycarbonate, environment friendly, energy efficient ready to use completewith all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincluding dismantling of unserviceable tube light, complete all as specified and directed. 206 S&F LED tube light fitting integral type 1x 20 W,230V, ultra slim square profile LED lighting fixture with extruded polycarbonate, environment friendly, energy efficient ready to use completewith all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincluding dismantling of unserviceable tube light, complete all as specified and directed. 207 Supply and fixing security light 35 Watt New generation energy saving and environmental friendly long life LED Bldg security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having Top Opening seperate toughtned glass/verminproof driver compartment, SPDs with IP66 protectionconnecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of size 32 mm dia length 1.2 mtr along with clamps, complete all as specified and directed by Engr - in - Charge. 208 Endura Pearl 35 Watt new generation energy saving and environmental friendly long life LED Bldg security light made up of pressure die case aluminium housing with high power LED as lighting source an lens enbedded PC cover having TOP opening seperate toughted glass/verminproof driver compartment, SPDs with IP66 protenction and impact rresistancee of IK07 connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of suitable size, Make : Havells HSN Code-8537 or equivalent in Crompton/ Wipro/ Bajaj/Philips. 209 S & F for MCB SP 6 to 32 amps 240 Volt,10 KA, B series, complete all as specified and diercted. 210 S & F for MCB SPN 32 to 40 amps 240 Volt, 10 KA, B series, complete all as specified and diercted. 211 S & F MCCB four pole 125 amps adjustable type, 415 volts, 50 Hz ,breaking capacity, 16 KA including making all connections using bottle /pin copper thimbles, complete all as specified and diercted. 212 Supply and fixing sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 12 ways, complete all as specified and diercted.Note: MCBs shall be measure and paid seprately. 213 S & F of sheet metal enclosures distribution boards, double door, VTPN, 415 volts 4 ways, as per IEC 61439-3, degree of protection IP-43 (one incoming three phase & twelve out goings single phase) for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed for the following:-(a) MCCB FOUR POLE 160 amps, AC,415 VOLTS25 KA=01 No (for incoming).(b) MCB SP 06- 40 amps = 12 Nos (for outgoings) complete with 125 amps fully insulated copper bus bar for each phase and neutral link, prefitted masking sheet fixed flush in wall including chases wall for fixing DB, complete all as specified and diercted.Note :- (i) TheDB shall be VTPN seriesof Make : Indoasian Cat No 811888, or Eqvlmake of L&T/ ABB/legrand. (ii) Connection of the MCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble properly crimped.(iii)All the vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) Double continuous earth wire shall be provided for each three phase DB from earthing mains duly.(v) Cutting chasing shall be part of job at no extra cost.(vi) MCCB & MCB shall be measured and paid seperately. 214 Supply and Fixing sheet metal enclosure with socket plugtop with MCB of a two pin and earth plug and a socket complete with one double pole MCB of 20 Amps rated, complete all as specified and directed. 215 Sheet metal enclosures factory made flush fixed for DBs when MCBs to be used, single pole and neutral (double Door powder coated), 4 way, 240 volts with 200 Amp rated bus bar, complete all as specified and directed. 216 Sheet metal enclosures factory made flush fixed for DBs when MCBs to be used, single pole and neutral (double Door powder coated), 8 way, 240 volts with 200 Amp rated bus bar, complete all as specified and directed. 217 M & L for submain wiring in and including PVC conduit 1.8 mm thick, 20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 6 sqmm (FRLS) and one run of PVC insulated, unsheathed multistranded copper conductor 6 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two run of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM).Note: (a) Insulation test of point wiring to be carried out on completion of work.(b) Proper colour coding is to be maintained. (Ph-Red, N-Black,Earth- Green)(c) Two runs of single core cable with one run of earth cable and suitable size of conduit shall be measured as one RM.(d) Cutting chases for sub main wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item. 218 Supply and laying Rigid Non-metallic PVC conduit for TV socket/telephone line 25mm external dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories nuts, saddles, pipe hooks etc, complete all as specified and diercted. 219 Supply and fixing of junction boxes for TV socket/telephone line (1 to 4 way), complete all as specified and diercted. 220 Supply and fixing of TV socket/telephone socket is fitted in Robust designed assembly plates smug fit on the wall with assembly plates with suitable modules, white in colour, dust free glossy finish, complete all as specified and diercted. 221 Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 25 sqmm x 4 core, 1100 Volts grade, complete all as specified and diercted. 222 Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 16 sqmm x 2 core, 1100 Volts grade, complete all as specified and diercted. 223 Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 50 sqmm x 3.5 core, 1100 Volts grade, complete all as specified and diercted. 224 Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 Sqmm 2 Core nominal cross section in service connections complete all as specified and diercted. 225 Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5m in depth and getting out, complete all as specified and diercted. 226 Returning, filling in, trenches including spreading leveling, watering and well ramming in layers not exc 25 cm, complete all as specified and diercted. 227 Removing excavated material to a distance not exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and diercted. 228 Sand cushioning to under ground cables, 8cm thick layer before laying and testing the cable and 15cm thick after laying and testing of the cable in trenches complete all as specified in Clause 19.75 of MES SSR 2009 Part-I, complete all as specified and directed by Engr-in-Charge. 229 Supply and Laying Un-reinforced precast concrete cable cover class LV Type 1, flat size 250mm x 150 mm x 40 mm thick, complete all as specified and diercted. 230 Sub class B bricks old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed. 231 Supply and fixing Single phase 240 volts Prepaid digital energy meter, complete all as specified and diercted. 232 M & L for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in theground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron strip 25x4mm as earth leadby means of bolts, nuts and washers of GIup to test point, GI tubing 15mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as specified and diercted.Notes: 1.Earth lead & protection pipes length upto & including 7.50 metre is included in the quoted rate.2.Soil should be free from stone, boulders, aggregate, gravels etc. 233 Supply and installing of the electric water storage heater (Geyser) of ABS body type of 25 litre capacity with rated power 2 KW, BEE, 5 star rated, vertical type, thermally insulated Mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostate, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm dia bore GI hexagonal adopters/Nuts on both side of inlet (cold water supply) and outlet (hot water supply) and including provision of wall mounting arrangement and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation, complete all as specified and as directed by Engr-In-Charge. 234 Mild steel galvanised tubing light grade 40mm diawith all fitting; laid in trenches, across road or on pole, complete all as specified and directed. 235 Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.50m below ground level, connecting to galvanised iron wire 4.00mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixingarrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m, all as per electricalplate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.NOTE :- Item of earthing includes the cost of 7.5 m long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work. 236 Dismantling old exsting fuse unit with cover, meter unit with MCCB box and unwanted wires, removing from site, shifting of changeover switch to required location and else depositing to store all as directed by Engineer in charge 237 Supply, installation, Commissiong and Testing LT panel board outdoor type, suitable for operation on 415 Volts, AC 3 phase, 4 wire 50 Hz electric supply system, double door type, having outer body made out of 3.15 mm thick MS Sheet CRCA Sheet and inner shell made out of 2mm thick CRCA sheet of size suitable to accomodate following accessories with front and rear hinged opening doors, handle type locking arrangement,powder coated internally and externally making it dust and virmin proof conforming to IEC 61436 Part-I & II. The cubical shall have frame work of angle iron 75x75X6mm, Alumninium Bus bar of incomer switch gear duly sleeved with heat shrink sleeve colour coated for 3 Phase 4 wire electric supply system and control wiring with multistranded PVC insulated copper wire size not less than 1.5 Sqmm. Panel shall have angle iron legs of appropriate size and embedded in PCC foundation of size as required or approved by manufacturers in PCC 1:2:4 Type B-2, using 40 mm graded crushed stone aggregate. Cost of PCC foundation, earth work and following accessories shall be deemed included in quoted rates: 238 Incoming:(a) MCCB 250 Amps, 4 pole AC with rupturing cap 36 KA,LT 415 Volts, 50 Hzcomplete with adjustable thermal setting, extended rotary handle, spreader, phase barrier = 01 No(b) On/ Off/ trip Indicator : 01 Set (c) Auxillary 1 C/O + TAC 1 C/O = 01 No(d) Control MCB 6 Amp SP, 10 KA = 01 No.Outgoing: (a) MCCB having current rating 200 Amp with rupturing cap 36 KA, AC 415 Volts, 4 pole complete with adjustable thermal setting, extended rotary handle, spreader, phase barrier =02 Nos. (b) On/ Off/ trip Indicator = 03 Set. (c) Auxillary 1 C/O + TAC 1 C/O= 02 Nos(d) Control MCB 6 Amp SP, 10 KA = 02 Nos. 239 Outgoing: (a) MCCB having current rating 160 Amp with rupturing cap 36 KA, AC 415 Volts, 4 polewith with adjustable thermal setting, extended rotary handle, spreader, phase barrier = 03 Nos. (b) On/ Off/ trip Indicator = 03 Set (c) Auxillary 1 C/O + TAC 1 C/O= 03 Nos(d) Control MCB 6 Amp SP, 10 KA = 03 Nos.(e) Digital VAF + PF Meter =01 No (f) LED Phase Indicator Lamp (R, Y, B) = 01 Set of 03(g) Control MCB 2 Amp SP, 10 KA = 03 Nos(h) 3 Phase 4 wire CT operated Energy Meter LCD Type = 01 No (Duly tested by HPSEBL (Make: Secure Premier 300 Type : E3T055 IS 14697) 240 Notes:(i) Incoming and outgoing cable shall be connected to panel with proper size of metallic cable glands and thimbles.(ii) Apron shall be provided at bottom of protection of coble to avoid entry of vermin, reptiles(iii) Layout diagram of panel shall be produced by contractor for approval of GE before placing order to manufacturer and the same shall be brought to site as per approved drawing.
Contract Date: Jan 21, 2026 Contract Value : ₹ 35.83 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Himachal Pradesh View Result →
7.
Defence #9609227 AOC
Tender For Special Repair To Building No. P-25 (Or Md Accommodation) At 28/2 Camp, Provision Of Interlocking Tiles Pathway In Dd Line And Provision Of Eight Chemical Earthingat Mil Stn Yol; 1 Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, complete all as specified and directed. 2 Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, complete all as specified and directed. 3 Pressed steel frames of size 105x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed. 4 Pressed steel frames of size 125x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed. 5 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and directed by Engr-In-Charge. 6 Factory made 2nd class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified and directed. 7 Factory made solid PVC Door/window/ventilator Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges shall be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 180 of MES SSR 2020 Part-II, complete all as specified and directed. 8 Factory made fully glazed PVC (frosted/ground/obscured) window/ventilator shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; complete all as specified and directed.Note:- Glass gauges inclusive of quoted rates. 9 Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter (for glass and wire gauge)ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thickincluding cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 Nos for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel butt hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07. Make : As per Appendix C. Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day. 10 M&L WPC (Wood Polymer Composit) Double Prelam Door Frame (Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheetC shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long L brackets of 19 x 19 mm MS square, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm MS square Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. complete as per manufactures specification & direction of engineer-in charge. 11 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm (5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufactures specification and drawing. 12 Sheet glass 3mm thick ordinary quality and glazingwith oil putty/aluminium beads in squares, not exc. 0.5 Sqm in each pane, complete all as specified and directed. 13 Figured glass, pin head type3mm thick and glazing with oil putty in squares n exc 0.5 Sqm in each pane, complete all as specified and directed. 14 Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks of glavanised wire staple fixed with stainless steel wire staples, fixed, complete all as specified and directed. 15 Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed. 16 Butt hinges (ISI marked), medium weight, cold rolled, mild steel 100mm long, complete all as specified and directed. 17 Extruded aluminium alloy handles (ISI marked, fabricated type, anodised, of size 150mm, complete all as specified and directed. 18 Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, fixed, complete all as specified and directed. 19 Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match, complete all as specified and directed. 20 Ordinary rat tail rod pattern springs 300mm, including roller and roller plate complete all as specified and directed. 21 S&F for Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size all as specified. 22 Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed. 23 2nd classhard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as as specified and directed. 24 Prelaminted particle board 18/19mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber frame work as on wall panelling cup boards shutters/shelves (sliding or fixed), complete all as specified and directed. 25 Extra over rates of 18/19mm thick block board or veneered particle board/ prelaminated board for external teak wood lipping, 6mm thick fixed with nails, complete all as specified and directed. 26 Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm, complete all as specified and directed. 27 Extruded aluminium alloy handles (ISI marked), fabricated type, anodised, of size 75mm, complete all as specified and directed. 28 Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. 29 Dismantling timber scantlings 40 sqcm and over in section, any position, any description not otherwise provided for,complete all as specified and directed. 30 Dismantling boarding, any discription fixed in any postion with nails, complete all as specified and directed. 31 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed. 32 Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed. 33 Non skid, Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. 34 Non skid, Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. 35 Non skid, Premium class Igrade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, as in skirting, dado etc . set and jointed in neat cement slurry and includingincluding 10mm thick rendering in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, complete all as specified and directed. 36 Glazed coloured tiles of size 450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:3 (1 cement : 3 coarse sand), complete all as specified and directed. 37 Machine cut kota stone slab flooring 18-20mm thick of size not less than 550 mm X 550mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC sub base, complete all as specified and directed. 38 Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as inflooring, 25mm thick, surface finished even and rough to receive top finish or chamfering of RCC chajja with proper slope to drain off storm water, complete all as specified and directed. 39 Plain cement concrete M-10, nominal mix, type C-2, using 40mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5cm deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. Note:- The unit rate include for use of form work (straight or curved). 40 Demolition of cement concrete (un-reinforced) of any description and any position not otherwise specifically provided for, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. 41 Plain cement concrete 1:5:10, nominal mix, type E-2, using 40mm graded mechanically crushed stone aggregate as in sunken floors, filling and mass concrete, complete all as specified and directed. 42 Water proofing treatment of sunken floor using SHALIURETHANE- BTD OF STP MAKE OR EQUIVALENT as approved by GE, high solid content single component water based liquid applied elastomeric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 1.5mm, having solid content of more than 80% elongation of 500+(-) 50%, laid over reinforcing layer on non woven geo-textile mesh of 40/50, 50 gms, including applying self primer coat by diluting with 1:1 ratio @ 0.4 kg per sqm and surface including 10 mm thick 1:3 plaster including cleaning of existing treatment complete all as specified and directed 43 Rendering cement plaster 10mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (5mm thick first layers and 5mm thick 2nd layer) mixed with WPC @ 3% weight of cement on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and as directed by Engr-In-Charge. 44 Plain cement concrete M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate as in sunken floor, 25mm thick, surface finished even and fair, complete all as specified and directed. 45 Mild steel galvanized iron water tubing 32mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings as in spout of sunken floor, including taking down old pipe, complete, all as specified and directed. 46 75mm thick Plain cement concrete M-10 nominal mix, C-2, using 40mm graded mechanically crushed stone aggregate as in sub base flooring, complete all as specified and directed. 47 Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. 48 Dismantling stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc.including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. 49 Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided for, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. 50 TMT steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 51 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)etc. for fair finished flat surfaces of concrete, complete all as specified and directed. 52 Marble 18 to 20mm thick, green marble, (table rubbed and polished and moulding of outer edges) as in kitchen cooking platform /shelf and verticle surfaces duly machine cut in skirting /dado and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade green marble type, complete all as specified and directed. 53 Reinforced cement concrete, M-15 (Nominal mix), type B-1, (with 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including formwork, complete all as specified and directed. 54 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed. 55 S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 56 S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 57 Dismantling and breaking up PVC drain pipes 75/110mm dia, fixed to walls, laid in floors or in trenches and removal of demolished materials from the site, complete all as specified and directed. 58 PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, fixed, complete all as specified and directed. 59 PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors, trenches, of bore 110mm, complete all as specified and directed. 60 PVC (SWR) pipes single socketed, in any length with rubber ring joints, in floors, trenches, of bore 75mm, complete all as specified and directed. 61 PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with adjustable clamps of bore 110mm, complete all as specified and directed. 62 PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with adjustable clamps of bore 75mm, complete all as specified and directed. 63 PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, provided with oval access door, fixed in repair, complete all as specified and directed. 64 PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, provided with oval access door, fixed in repair, complete all as specified and directed. 65 PVC (SWR) bends any radius, 110mm bore jointed with solvent cement (fitted with or without oval access door), fixed in repair, complete all as specified and directed. 66 PVC (SWR) bends any radius, 75mm bore jointed with solvent cement (fitted with or without oval access door), fixed in repair, complete all as specified and directed. 67 PVC (SWR) vent cowl 110mm bore fixed in repair, complete all as specified and directed 68 Rotational moulded polyethylene water storage tank 500 Litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including PVC float ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, complete including taking down old tank and removng to store all as specified and directed. 69 Sink with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connectingunion to pipe, including 40mm dia waste pipe & CP waste coupling, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, Cat No Blue Star SSSB-52 Silver Shine or equivalent in makes specified in Appendix C fixed in repair complete all as specified and directed. 70 Soap dish, chromium plated, fixed to plugs with chromium plated, brass screws and fixed in repair, complete all as specified and directed. 71 Sheet glass shelf assembly 55cm long consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, selected quality as approved by GE, fixed in repair, complete all as specified and directed. 72 Chromium plated brass shower rose, fancy type (as approved by GE/Engr-In-Charge), 125mm size with shower arm, chromium plated, 195mm longh with bend of 45 degree with flange suitable for 15mm bore pipe with or without swivel joint fixed to pipe, fixed in repair, complete all as specified. 73 Angle/stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle,screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed. Make : Cat. No.360006 of Hindware orF1016201of CERA or 8110 of Prayag or TQT-526N of Essco or equivalent in makes specified in Appendix C 74 Stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs, complete all as specified and directed. Make : Cat. No.360007 of Hindware orF2014361 of CERA or 8118/8120 of Prayag or TQT-514A of Essco or equivalent in makes specified in Appendix C 75 Bib taps, fancy type 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed.Make : Cat. No.360004 of Hindware orF2002152 of CERA or 8108 of Prayag or TQT-512 of Essco or equivalent in makes specified in Appendix C 76 Supply and fixed in repair PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handlewith brackets including 32mm dia PVC long bend flush pipe 90cm long and 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixed, complete all as specified and directed. Make : Cat. No. 504 of Prayag or B1010105of CERA or equivalent in makes specified in Appendix C 77 Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with PVC ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-1 using 20mm graded crushed stone aggregate complete all as specified, fixed in repair, complete all as specified and directed. Make : Cat. No.: CABLE 3020105of CERA orECS-WHT-453 of Essco or 20004 of Hindware or 4053/4054/4056 of Prayag equivalent in makes specified in Appendix C 78 Brass Chromium Plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified. 79 Wash basins, Vitreous China (corner or Flat) size 450mmx300mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed in repair, complete all as specified and directed. Make : Cat. No.: S2040161of CERA orECS-WHT-841 of Essco or 10055 of Hindware or 4053/4054/4056 of Prayag equivalent in makes specified in Appendix C 80 600mmx450mm bevelled edge looking mirror of selected quality with 6mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repair, complete all as specified and directed. 81 Brass CP sink mixer (wall mounted) with 165mm long swivel spout, connecting legs and wall flanges screwed down for iron pipe and fixed, complete all as specified and directed. Make:Cat. No.: F1020501of CERA or equivalent in makes specified in Appendix C. 82 Chromium plated centre hole Mixer for Wash hand basin for mixing hot or cold water with 450mm braided connection pipe (without pop-up) screwed for iron pipe, complete all as specified and directed.Make:Cat. No.: F12002461 of CERA or equivalent in makes specified in Appendix C. 83 Brass CP wall Mixer for mixing hot or cold water in bath screwed for iron pipe, complete all as specified and directed.Make:Cat. No.: F12002511 of CERA or equivalent in makes specified in Appendix C. 84 Polyethlene and unplastcised PVC pipe, 32mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm all as specified and directed. 85 Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. 86 Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on internal fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. 87 Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers on fair faces of brick or stone walls finished even and smooth without using extra cement, mixed with WPC, complete all as specified and directed.Note : Supply only Water proofing compound shall be measured and paid for seperately. 88 Material and Labour for waterproofing of exterior walls, including complete removal of existing plaster including raking out joints and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k). The treatment shall be done from ground level and providing 15mm thick cement plaster in CM 1:4 finished even and smooth all as directed. Make: ASIAN PAINTS/BERGER/NEROLAC 89 Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. 90 Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over & including 2mm thick wall care putty, complete all as specified and directed. 91 Preparation of old treated plastered surface of wall by complete removal of existing treatment and applying two coats of oil bound distemper over & including 2mm thick wall care putty, complete all as specified and directed. 92 Preparation of new plastered or unplastered surfaces of wall to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed. 93 Preparation of old plastered or unplastered surfaces of wall including complete removal of existing treatment and finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed. 94 Preparation of new plastered surfaces of ceiling with 2mm thick wall care putty and applying one coat of oil bound distemper, complete all as specified and directed. 95 Preparation of old treated plastered surfaces of ceiling by complete removal of existing treatment, applying 1mm thick layer of wall care putty where required and one coat of oil bound distemper, complete all as specified and directed. 96 Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick cement rendering in two layers of 10mm each (top/final layer shall be rendered after final setting of under layer) in CM 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs ect, complete all as specified and directed. 97 Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. 98 Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. 99 Taking up or down 25 mm to 32mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. 100 Supplying and laying of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 101 Supplying and laying of CPVC pipes 32mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 102 Tank Adaptor CPVC pipes of 32mm dia SDR 11 & Plain CPVC SDR 11 all as specified and directed. 103 Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipes of 20mm dia SDR 11 & Plain CPVC SDR 11 all as specified and directed. 104 Supply only intergal water proofing compound, complete all as specified and directed. 105 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed. 106 Plain cement concrete M-15, nominal mix, B-0 using 12.5mm graded mechanically crushed stone aggregate as in lintels upto 1.50 metre clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, chamfered angles and throating, complete all as specified and directed.Note :- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. 107 Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches, pillars, including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and directed. 108 Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. 109 Brick work with old sizefly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. 110 S&F in repair 25mm dia powder coated mild steel, chromium plated curtain rod including brackets, complete all as specified and directed. 111 Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290 Gde E-165, steel work, complete all as specified and directed. 112 Preparetion of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. 113 Steel plate rack of size 600mmx750mmx250mm made of stainless steel 0.60mm thick fixed with plugs,washers and steel screws including fixed inwall with screws ands PVCsleeve of required or fixing arrangement complete all as specified 114 Preparation of old painted steel surfaces by complete removal existing treatment of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paintover existing painted surface complete all as specified and as directed. 115 Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, fixed in repair, complete all as specified and directed. 116 Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5m in depth and getting out, complete all as specified and diercted. 117 Removing excavated material to a distance not exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and diercted. 118 Plain cement concrete M-10 nominal mix, type C-1 using 20mm graded mechanically crushed stone aggregate as in surface channel and drains, complete all as specified and directed. 119 Returning, filling in, trenches including spreading leveling, watering and well ramming in layers not exc 25 cm, complete all as specified and diercted. 120 Surface excavationnot exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified. 121 Hardcore of broken stone or boulders of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, all as specified. 122 Demolition and breaking up drain pipes (Salt glazed stone ware, AC, RCC pipes) 150mm dia and removal of debris to a distance exc 5 km outside station boundary, complete all as specified and directed. 123 Reinforced concrete pipes, class NP2, laid and jointed complete with collars, bore of pipe 150mm (Internal dia), complete all as specified and directed. 124 Plain cement concrete 1:4:8, type D-2 nominal mix using 40mm graded aggregate as in concrete bed to drain pipes including forming cradles, packing under and haunching against the sides of pipes after they are laid and tested for dia of pipe 150mm, complete all as specified and directed.Note:- (i) The unit rate includes for use of form work.(ii) For width and depth of PCC bed - refer preamble (a) (i) (ii) on page 356 of SSR Pt-II). (iii) Haunching shall be as per MES SSR-part-I/Part-II 125 Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed. 126 Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. 127 M & L for point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and includingconcealed PVC conduit(ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable sizeincluding concealedMS pressed steel (Modular sunken box) terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and Modular cover plate as top cover (ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/Exhaust fan point controlled by one switch, complete all as specified and directed. Note : i)Wiring Colour code i.e. Red/Yellow/Bluefor Phase, Black for neutral and Green for earth shall be maintained.ii) Rate of cutting chases, cement plaster, white wash and making surface good as existing surface included in quoted rate.iii) Point wiring is considered for Modular Switches and sockets. Rate of Metallic Sunken box and modular sheet cover plate and other connected accessories required for modular point wiring included in quoted rate.iv) Rate of modular switch and sockets will be paid seperately under relevant item. 128 All as per serial item No 127 above, but for one 3 pin 5 Amps socket outlet on the same board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed. 129 All as per serial item No 132 above, but for one 3 pin 5 Amps socket outlet on the independent board with 1.50 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 1.50 sqmm stranded copper conductor cable as continous earth wire, complete all as specified and directed. 130 All as per serial item No 127 above, but for one light point controlled by two way switches, complete all as specified and directed. 131 All as per serial item No 127 above, but for 5 pin 15 amps socket out let on independentwith 2.50 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.50 Sqmm stranded copper conductor cable as continuous earth wire, complete all as specified and directed. 132 S & F for modular switch 6A one way, single module, complete all as specified and directed. 133 S & F for modular switch 16A one way, single module, complete all as specified and directed. 134 S & F for modular socket for 6A 2/3 pin combined, 2 module, complete all as specified and directed. 135 S & F for modular socket for 6A/16A, 5 pin combined, 2 module, complete all as specified and directed. 136 S & F for modular bell push 6A, single module, complete all as specified and directed. 137 Supply and fix modular Bell Push with indicator 6 Amps, 1 moduleincluding all As per existing make, complete all as specified and directed by Engr-in- Charge, 138 Supply and Fixing sheet metal enclosure with socket plugtop with MCB of a two pin and earth plug and a socket complete with one double pole MCB of 20 Amps rated, complete all as specified and directed. 139 S & F for modular switch 6A two way, single module, complete all as specified and directed. 140 Supply and fixing high speed stepped type electronic fan regulator 120W, 2 module, complete all as specified and directed. 141 M & L for ceiling rose 65 x 50mm three terminals, fixed, complete all as specified and directed. 142 Sheet metal enclosures factory made flush fixed for DBs when MCBs to be used, single pole and neutral (double Door powder coated), 8 way, 240 volts with 200 Amp rated bus bar, complete all as specified and directed. 143 Sheet metal enclosures factory made flush fixed for DBs when MCBs to be used, single pole and neutral (double Door powder coated), 4 way, 240 volts with 200 Amp rated bus bar, complete all as specified and directed. 144 S & F for MCB SP 6 to 40 amps 240 Volt,10 KA, B series, complete all as specified and diercted. 145 S & F for MCB SPN 32 amps 240 Volt, 10 KA, B series, complete all as specified and diercted. 146 S & F MCB, TPN,63 A capacity, 415 V, 10 KA, C series including taking down old MCB TPN, complete all as specified and directed.Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs. 147 M & L for submain wiring in and including PVC conduit 1.8 mm thick, 20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 6 sqmm (FRLS) and one run of PVC insulated, unsheathed multistranded copper conductor 6 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two run of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM).Note: (a) Insulation test of point wiring to be carried out on completion of work.(b) Proper colour coding is to be maintained. (Ph-Red, N-Black,Earth- Green)(c) Two runs of single core cable with one run of earth cable and suitable size of conduit shall be measured as one RM.(d) Cutting chases for sub main wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item. 148 S&F in Replacement basic all purpose surface and wall mountedLED tube light fitting integral type 1x 10 W, 230V, completewith all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed. 149 S&F in Replacement basic all purpose surface and wall mountedLED tube light fitting integral type 1x 20 W, 230V, completewith all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed. 150 Taking down ceiling fan/exhaust fan of 1200/300/250 mm sweep, any size/make from existing position of any height by disconnecting electrical connections and transporting to store for Inspection in presence of Engr-in-charge/JE (or rep of department) after dismentling spares parts complete all as required at site and directed by Engr - in - Charge. 151 Taking down water storage heater(Geyser) of 25/35/50 liters capacity from electric socket and disconnecting PVC connection, water supply, screwed down and transporting to store for Inspection in presence of Engr-in-charge/JE (or rep of department) after dismentling spares parts complete all as required at site and directed by Engr - in - Charge. 152 Supply and installing of the electric water storage heater (Geyser) of ABS body type of 25 litre capacity with rated power 2 KW, BEE, 5 star rated, vertical type, thermally insulated Mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostate, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm dia bore GI hexagonal adopters/Nuts on both side of inlet (cold water supply) and outlet (hot water supply) and including provision of wall mounting arrangement and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation, complete all as specified and as directed by Engr-In-Charge. 153 Supply and fixing for AC Ceiling Fan, single phase, 230 volts, 1200 mm sweep includinggrouting the ragged bolts in wall, fixing the frame on the exhaust side and connecting up with PVC insulated three core 1.50 sqmm copper cable from ceiling rose to exhaust fan, complete all as specified and diercted. 154 Supply and fixing for AC exhaust fans, Steel body, single phase, 230 volts, 250 mm sweep including grouting the ragged bolts in wall, fixing the frame on the exhaust side and connecting up with PVC insulated three core 1.50 sqmm copper cablefrom ceiling rose to exhaust fan, complete all as specified and diercted. 155 Endura Pearl 35 Watt new generation energy saving and environmental friendly long life LED Bldg security light made up of pressure die case aluminium housing with high power LED as lighting source an lens enbedded PC cover having TOP opening seperate toughted glass/verminproof driver compartment, SPDs with IP66 protenction and impact rresistancee of IK07 connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of suitable size, Make : Havells HSN Code-8537 or equivalent in Crompton/ Wipro/ Bajaj/Philips. 156 Taking down AC Meter, checking and repairing at site by repair/replacement of contacts, terminals, indicators, glass cover, plate screws, electronic cicrcuits etc and refixing in same position complete all as specified. 157 Supply & fixing wooden box suitable to accommodate 4 Nos meter boxes and TPN DB double door -01 No, size of box shall be 80 cm x80 cm x30cm with board thickness 20mm fixed on wall with suitable opening shutter duly hinged, locking arrangements with provision for mounting metered TPN box and cable incoming/outgoing for connections including painting the box, complete all as specified and directed by Engr - in - Charge. 158 Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 35 sqmm x 3.5 core, 1100 Volts grade, complete all as specified and diercted. 159 Sand cushioning to under ground cables, 8cm thick layer before laying and testing the cable and 15cm thick after laying and testing of the cable in trenches complete all as specified in Clause 19.75 of MES SSR 2009 Part-I, complete all as specified and directed by Engr-in-Charge. 160 Sub class B bricks old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed. 161 Mild steel galvanised tubing light grade 50mm diawith all fitting; laid in trenches, across road or on pole, complete all as specified and directed. 162 Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.50m below ground level, connecting to galvanised iron wire 4.00mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixingarrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m, all as per electricalplate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.NOTE :- Item of earthing includes the cost of 7.5 m long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work. 163 Chemical Earthing complete with copper earth plate electrode 60cm x 60cm x 3.15mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.50m below ground level, connecting to copper eath strip of size 32x6mm (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised iron and connected to power and sensitive equipments and lightening arrestor upto 7.5m away from earth electrode, earth strip protected by provision of galvanised iron pipe light grade 40mm bore including earth work in ype of strata, PCC chamber in plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates with 80mm thick cover of reinforced cement concrete 1:2:4 reinforced with TMT steel bars 8mm dia @ 140mm c/c bothways and frame of angle iron 50x50x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape with fixingarrangement, funnel, wire mesh, galvanised iron medium grade 40mm bore watering pipe perforated at bottom including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m, all as specified and testing on completion. 164 Notes: The rate quoted is deemed to be inclusive of following:(a)Excavation & earth work for earth pit (size 1.20m x 1.20m x 4.00m)in any type of soil including filling in ramming in layers, watering & removal of surplus soil etc as directed .(b)GI tubing light grade 40mm bore dia 7.5 mtrs long for strip protection and medium grade 40mm watering pipe.(c)The chemicals viz Bentonite Clay, Graphite Powder, Copper Sulphate, Sodium Chloride and Ground Enhancement Material (like conductive cement, carbon) of brands like Marconite, FurseCEM as requied to improve soil conductivity and maintain low earth resistance over time, especially in dry or rocky soil conditions. (d)A layer of magnesium sulphate (MgSO4) at top of earthing pit but below the PCC foundation as directed. (i.e. 150 Kg in weight)(e)Earth pit of internal size 600mmx600mmx600mm, with built in PCC (1:3:6) coping 15cm above, embedded with MS angle 50x50x3mm frame work duly painted with anti -corrosive bituminous paint, with and including RCC slab 80mm thick in cement concrete (1:2:4) type B1 reinforced with TMT steel bars 8mm dia having lifting arrangement duly painted in red color and marking earth pit as directed. Name Plate ofEarth pit icluded in rated quote. 165 (f)On testing, after completion, if the earth resistance < 1.0 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obatined.(g)M&L for copper strip of any size for earthing lead connected to equipments/DBs. (Brazing will be done at earthing lead joints except terminal connection). 166 S&F Copper strip 32 x 6 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed. 167 S&F Air termination, single pointed, copper rod 12mm dia and 300mm long as specified and directed. 168 S&F Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screws all as specified and directed.
Contract Date: Jan 14, 2026 Contract Value : ₹ 33.56 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Himachal Pradesh View Result →
8.
Educational and Research Institute #9407553 AOC
supply of Medicine And Consumable Items , Medicine / Consumable Items / X-Ray Items / Suture Items , 0.035 Coaxial Delivery Catheter 0.035 Distal Jd Coaxial Delivery Catheter Should Be Dgci And Usfda Approved , 0.068’’ Reperfusion Catheter 6F Proximal And Distal Od, 0.068’’ Proximal And Distal Id Should Be Dgci And Usfda Approved , 1.3 / 1.4 A Adult Dialyzer ( Dialyzer- Multiple Use ) , 2 Octyl Cynoacrylate Topical Skin Adhesive 0.5Ml Pen Shaped , 2 Octyl Cynoacrylate Topical Skin Adhesive 0.5Ml Vial , 2-Octyl Cyanoacrylate Liquid Topical Skin Adhesive Packaged Within A Pen Applicator Along-With A Self-Adhering Mesh Of 22Cm , 2-Octyl Cyanoacrylate Liquid Topical Skin Adhesive Packaged Within A Pen Applicator Along-With A Self-Adhering Mesh Of 60Cm , 9.0 Fr, Single Lumen Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Apositioning System For Lap Ventral Hernia Consisting Of A Echo Ps Balloon For Positioning With An Uncoated Light Weight Polypropylene Mesh On One Side And An Absorbable Hydrogel Based Barrier With Bio Resorbable Pga Fibres Based On Sepra Technology On The Other.Various Sizes ( 4.5 / 4.6 / 6 / 6*8 ) , A.V Blood Lines With Av Pressure Transducer Protector For All Machine Types And Dialysizer ( Acceptable For Fitting To All Standard Dializer ) , Set , A.V Fistula Needle 16 G , A.V Fistula Needle 17 G , Abatacept 250Mg. Inj. , Abdaminal Binder 28No. , Abdaminal Binder 30No. , Abdaminal Binder 32No. , Abdaminal Binder 34No. , Abdaminal Binder 36No. , Abdaminal Binder 38No. , Abdaminal Binder 40No. , Abdaminal Binder 42No. , Abdominal Drainage Kit ( Adk Drain ) ( Size - 20, 24, 28, 32 No. ) , Abdominal Drainage Kit 28, 30, 32, 34 , Abdominal Drainage Kit; 16 Size, 2Litre Bag Capacity , Abdominal Drainage Kit; 22 Size, 2Litre Bag Capacity , Abdominal Dressing With Viceral Protective Layer For Compartment Syndrom To Reduce Medial Tension, Ce Certified, Forthird Generation Npwt System, 66.5*80.2 Cm , Abg Sampling Syringe With Pre Heparin Dry Lithium ( 23.5 Iu / Ml ) , Above 40 Microns Sterile , Abscess / Bilary Drinage Catheter ( Pigtail ) With Needle , Abscess / Biliary Drinage Catheter ( Straight ) , Abscess / Biliary Drinage Catheter ( Pigtail ) , Abscess Biliary Drinage Sets Pigtail Type , Abscess / Biliary Drinage Sets Malecot Type , Absolute Ethanol100 Mlsolutions , Absorbable Adhension Prevention Orc Knitted Film 3X4 , Absorbable Gelatin Based Topical Absorbable Flowable Hemostat With 6Cc Syringe Pre-Filled With Hemostatic Matrix. With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexible Applicator Tip , Absorbable Gelatin Based Topical Absorbable Flowable Hemostat With 6Cc Syringe Pre-Filled With Hemostatic Matrix. With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexible Applicator Tip , Absorbable Gelatin Spongeu.S.P Regular80mmx 50Mmx10mm ( 2 Pcs. Packet ) , Absorbable Gelatin Sponge Based Topical Absorbable Hemostat Without Formaldehyde. Should Be Sterilized By Dry Heat, 20Cmx7cmx0.05Cm. , Absorbable Gelatin Sponge Based Topical Absorbable Hemostat Without Formaldehyde. Should Be Sterilized By E-Beam Irradiationm 0.3X8cm , Absorbable Gelatin Sponge Should Not Be Cross Linked By Formaldehyde. Should Be Sterilized By Dry Heat, 7Cm X 5Cm X 1Cm. , Absorbable Hemostat Powder With Microporous Polysaccharide Hemosphere ( Mph ) Technology In One Single Sterile Pack For 5Gm In Bellow Applicator , Absorbable Hemostat Powder With Mph ( Microporous Polysaccharide Hemosphere ) Technology In One Single Sterile Pack Of 1Gm In Bellow Applicator-Us Fda Approved , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 0, 1 / 2 Circle Taper Point, 30Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 0, 1 / 2 Circle Taper Point, 45Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 30Cm, 26Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 30Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 45Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 3-0, 1 / 2 Circle Taper Point, 45Cm, 26Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 3-0, 3 / 8 Circle Rc, 45Cm, 19Mm. Unidirectional , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4204 Size : 2-0, Chromic-Straight R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4205 Size : 0, Chromic-Straight R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4208 Size : 2-0, Chromic-Straight R B, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4213 Size : 0, Chromic-Straight R B, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4216 Size : 2-0, Chromic-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4217 Size : 0, Chromic-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4220 Size : 2-0, Chromic-3 / 8 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4221 Size : 0, Chromic-3 / 8 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4225 Size : 0, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4275 Size : 1, Chromic-1 / 2 Circler B & 1 / 2 Circle R C Da, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4276 Size : 0, Chromic-1 / 2 Circler B &1 / 2 Circle R C Da, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4277 Size : 2-0, Chromic-1 / 2 Circler B &1 / 2 Circle R C Da, 36Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4278 Size : 2, Chromic-1 / 2 Circle R B, 65Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4279 Size : 0, Chromic-1 / 2 Circle T C Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4280 Size : 4-0, Chromic-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4281 Size : 5-0, Chromic-3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4288 Size : 3-0, Plain-Straight Cutting, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4295 Size : 2-0, Chromic-1 / 2 Circle R B, 38Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4296 Size : 0, Chromic-1 / 2 Circle R B, 38Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4297 Size : 1, Chromic-1 / 2 Circle T C Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4297A Size : 1, Chromic-1 / 2 Circle T C Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4826 Size : 1, Chromic-3 / 8 Circle R B D A, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5007 Size : 3-0, Plain-Straight R B, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5010 Size : 3-0, Plain-3 / 8 Circle Cutting, 22Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5020 Size : 3-0, Plain-3 / 8 Circle Cutting, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5033 Size : 2-0, Plain-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5048 Size : 4-0, Chromic-3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures4237 Size : 3-0, Chromic-1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2003 Ldl Size : 2-0, 1 / 2 Circle Cutting 30Mm, Da, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2214 Size : 0, Chromic-1 / 2 Circle R B, 30Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2215 Size : 1, Chromic-1 / 2 Cirle R B Heavy, 40Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2216 Size : 2, Chromic-1 / 2 Circle R.B.Mayo, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4113 Size : 2-0, Chromic-3 / 8 Circle R B, 32Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4114 Size : 0, Chromic-3 / 8 Circle R B, 32Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4123 Size : 2-0, Chromic-1 / 2 Circle R B, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4124 Size : 0, Chromic-1 / 2 Circle R B, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4200 Size : 2-0, Chromic-Straight R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4201 Size : 3-0, Chromic-3 / 8 Circle Cutting, 22Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4226 Size : 1, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4226T Size : 1, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4227 Size : 1, Chromic-1 / 2 Circle R B Mayo, 45Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4228 Size : 2, 1 / 2 Circle Rb 45Mm Mayo, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4229 Size : 0, Chromic-1 / 2 Circle R B Mayo, 45Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4232 Size : 2-0, Chromic-3 / 8 Circle R B, 65Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4233 Size : 0, Chromic-3 / 8 Circle R B, 65Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4237 Size : 3-0, Chromic-1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4238 Size : 3-0, Plain-1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4239 Size : 1, Chromic-1 / 2 Circle Tr P Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4241 Size : 2-0, Chromic-1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4242 Size : 0, Chromic-1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4244 Size : 2, Chromic-1 / 2 Circle Tr P Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4245 Size : 2-0, Chromic-1 / 2 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4246 Size : 0, Chromic-1 / 2 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4248 Size : 1, Chromic-1 / 2 Circle R B Heavy, 50Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4249 Size : 2-0, Chromic-1 / 2 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4250 Size : 0, Chromic-1 / 2 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4255 Size : 2-0, Chromic-1 / 2 Circle Cutting Heavy, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4258 Size : 0, Chromic-1 / 2 Circle R B Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4259 Size : 1, Chromic-1 / 2 Circle R B Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4262 Size : 1, Chromic-3 / 8 Circle Cutting, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4264 Size : 0, Chromic-5 / 8 Circle R B, 35Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4267 Size : 1, Chromic-3 / 8 Circle R B Blunt, 63Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4268 Size : 5-0, Chromic-3 / 8 Circle R C , 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4269 Size : 5-0, Plain-3 / 8 Circle R C , 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4270 Size : 4-0, Plain-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4271 Size : 3-0, Plain-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4272 Size : 3-0, Chromic-1 / 2 Circle R C, 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4273 Size : 1, Chromic-1 / 2 Circle R C, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4274 Size : 3-0, Chromic-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 26Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 36Mm 1 / 2 Circle Reverse Cutting Os-6 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 40Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 48Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 48Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Reverse Cutting Os-6 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 40Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 48Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 48Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 26Mm 1 / 2 Circle Taper Point Ct-2 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 26Mm 1 / 2 Circle Taper Point Sh Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 19Mm 3 / 8 Circle Reverse Cutting Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 24Mm 3 / 8 Circle Reverse Cutting Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 26Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbent Cotton Roll 100 Gm Each Consumable , Absorbent Cotton Wool Ip 500 Grms. , Aceborophylline 100 Mg Cap , Aceclofenac 200 Mg+Cyclobenzaprine 15Mg Tab. , Aceclofenac 200 Mg+Thiocolchicoside 16 Mg Tab. , Aceclofenac Ip 1.5%W / W + Linseed Oil 3.0%W / W + Capsaicin 0.025%W / W + Methyl Salicylate I Ip 10%W / W + Menthol Usp / Bp 5%W / W + Benzyl Alcohol 1%W / W - 30Gm Ointmentointment , Acitrom 2Mg Tablets , Actinomycin-D ( 0.5Mg Vial ) , Vial , Acyclovir 0.5 %W / Wointment , Acyclovir Ip- 400Mg / 5Ml ( 100Ml Bottle ) Syp , Acyclovir Ip- 800Mg Tab. , Adapalene 1 %W / W Gel , Adhesion Barrier Matrix2x2 Inch 2X2 Inch , Adhesion Barrier Matrix3x3 Inch 3X3 Inch , Adhesion Barrier Matrix ( 1X1 ) . , Adhesion Barrier Matrix ( 1X3 ) . , Adhesion Barrier Matrix ( 2X2 ) . , Adhesion Barrier Matrix ( 3X3 ) . , Adhesion Barrier Matrix ( 4X5 ) . , Adhesion Barrier Matrix 1X1 Inch , Adhesion Barrier Matrix 1X3 Inch , Adhesion Barrier Matrix 4X5 Inch , Adhesive Plaster 10 Cm X 8 Mtrs Each Roll , Adhesive Plaster 7.5 Cm X 10 Mtrs Each Roll , Adhesive Plasters Usp 7.5 Cm X 5 Mts / Roll , Adrenaline 0.005 Mg+ Lignocaine 2 %W / V Injection , Adrenochrome Monosemicarbazone0.75 Mg.Ml 2Ml Amp. Inj. , Adultarterial Filter Withbypass Loopthe Arterial Filter Should Be For Adult Use. Priming Volume Should Not Be More Than 120Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or 3 / 8. The Filter Should Allow Maximum Blood Flow Rate Of 4.0 To 6.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Adult Arterial Cannulae For Arch Cannulation Dlp Metal Tip Curved Arterial Cannulae Without Vented 3 / 8 Inch Connector, Sizes- 20, 22, 24 , Adult Arterial Cannulaefor Arch Cannulation. Dlp Straight Tip Arterial Cannulae, Connection Site 3 / 8 Inch, Sizes -16, 18, Fr , Adult Double Lumen Catheter Setfr-12 Fr, 16 Cm ( Curved ) , Adult Double Lumen Catheter Set Fr-12 Fr, 13 Cm. ( Curved ) , Adult Double Lumen Catheter Set Fr-12 Fr, 13 Cm. ( Straight ) , Adult Double Lumen Catheter Set Fr-12 Fr, 16 Cm ( Straight ) , Adult Penile Clamp; Made Of Soft Material, Reusable And Washable , Advance Bipolar Hand Activated Probe For Open Surgery With 13Mm Shaft Diameter And 20 Cm Shaft Length, 6 Mm Wide Straight Jaw Design With Jaw Length Of 38 Mm , Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy , Having Separate Seal And Cut Buttons, Capable Of 360 Degrees Rotation , Advanced Rf Energy Hand Instruments Of 12Mm Shaft Diameter For Open Procedureswith Shaft Lengths 22Cm And Should Be Both Hand & Foot Activated. Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm With 55 Degree Articulation And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 45Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedures With Shaft Lengths 14Cm And Should Be Both Hand & Foot Activated. Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedureswith Shaft Lengths 25Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Aicd Device+ Leads ( Fda Approved Not Ce Approved ) , Air Mattress , Albendazole Tab ( 200 Mg ) , Tablet , Albumin 25% Injection , Aldehyde Free Instand Surface Disinfectant Low Lintwipe, Size 12 X 12.5 Inches In Bucket Each 100Gms Contanins- 1 Propanol 6Gm 2 Orioabik 9Gms Abd Etgabik 10Gms , Aldehyde Free Surface Disinfactant Cleaner ( Conc. ) With Material Protection Factor Containing Dodecylbispropylene Triamine 5 Gm With Surfactants, Antifoaming Agents 500 Ml Solution , Alendronate 70 Mg Tab. , Alkyldimethyl Benzyl Ammonium Chloride ( Bkc ) I.P- 13.80%W / V, Didecyl Dimethyl Ammonium Chloride - 9.2% , Alkyldimethyl Benzyl Ammonium Chloride ( Bkc ) Ip- 13.6% W / V, Didecyl Dimethyl Ammonium Chloride 13.0% W / V, Polymeric Biguanide Hydrochloride ( Phmb ) - 5.0% , All Human ( Bovine Aprotinin Free ) Fibrin Sealant - 1Mla Package ( Different Skus - 1Ml, Containing : One Vial Of Bac2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions All Human Formulation Free Of Bovine Aprotinin Triple-Lumen Tip To Prevent Clogging Inside The Applicator Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , All Human ( Bovine Aprotinin Free ) Fibrin Sealant - 2Mla Package ( Different Skus - 1Ml, Containing : One Vial Of Bac2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions All Human Formulation Free Of Bovine Aprotinin Triple-Lumen Tip To Prevent Clogging Inside The Applicator Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , All In One Hand Control Device For Laparoscopic Suction, Irrigation, , Cut, Coag Assembly , All In One Ptfe Coated Ez Clean Laparoscopic Electrosurgical Electordes Compatible With All In One Hand Control Device , All-Human ( Bovine Aprotinin Free ) Fibrin Sealant , All-Human Formulation Free Of Bovine Aprotinin , Alprostadil ( Prostaglandin E1 ) Usp 500Mcg / 1Ml Inj. , Alteplase 50Mg.Inj. , Aluminium Hydroxide + Aluminium Hydroxide + Magnesium Hydroxide + Simethicone 200Ml Syp. , Ambo Bag Silicone Ruber Complete Set All Size , Ambo Lmadisposable Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. Sizes- 1, 2, 3, 4 5, 6 , Ambo Lma Reusable Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. Sizes- 1, 2, 3, 4, 5, 6 , Ambu Bag Adult ( Silicon ) , Ambu Bag Child ( Silicon ) , Amikacin + Dexa5gm. Ointment , Amikacin + Dexa 5Ml 5Ml Eye Drop , Amikacin Eye Dropeye Drop , Amino Acid 10% 500Ml With Taurine ( 51G ) Without Sorbitol & Xylitol Iv , Amino Acid 5% 250Ml Without Sorbitol ( 12.5G ) Iv , Amino Acid With Tauin 500Ml Ffs Bottle 500Ml ( 10% ) Iv , Aminoacid ( Essential ) Infusion ( 10% 100Ml Ffs Bottle ) , Bottle , Aminoacid 5% - Ivf ( 100Ml Bottle ) , Infusion , Aminocaproic Acid 5 Mg Inj. , Aminophylline 250 Mg / 10 Ml Vial Injection , Aminophylline 25Mg / Ml 10Ml Amp Inj. , Amiodarone 150Mg Tablets , Amipriprazol-10Mg. Tab. , Ammoidine 0.75 Solution , Ammoidine0.75%+Amminobenzoic Acid2% ( Melanocyl Ointmentment ) Ointment , Amniotomy Spike Cot. Inbuilt With Plastic Hook, Sterilized Single Pack . , Amoxicillin Cloxacillin And Lactic Acid Bacillus Capsules 250Mg , Amoxycylline+ Cloxacillinic 125Mg / 31.25Mg ( 30Ml ) Syp. , Ampicillin Trihydrate- 500Mgcap. , Amplatz Extra Stiff Guide Wire , Amplatz Extra Stiff Guide Wire Floppy Tip 0.035X150 & 260 Cm , Amplatz Extra Stiff Guide Wire J Tip 0.035X150 & 260 Cm , Amplatz Sheath With Dilator, No.20 , Amplatz Sheath With Dilator, No.26 , Amplatz Sheath With Dilator, No.28 , Amplatz Sheath With Dilator, No.30 , Analyser Cell Counter Printing Roll 5Cm. , Anattomical Facemask With Inflatable Seal Size 0 , Anattomical Facemask With Inflatable Seal Size 00 , Anattomical Facemask With Inflatable Seal Size 00, 0, 1, 2, 3, 4, 5 , Anattomical Facemask With Inflatable Seal Size 1 , Anattomical Facemask With Inflatable Seal Size 2 , Anattomical Facemask With Inflatable Seal Size 3 , Anattomical Facemask With Inflatable Seal Size 4 , Anattomical Facemask With Inflatable Seal Size 5 , Anesthesia Breathing Circuits - 16 - 40 ( 41Cm - 101Cm ) Adult Expandable Circuits . , Anesthesia Breathing Circuits - 20-40-60 ( 51 Cm-101 Cm-152 Cm ) Segmented Expandable Extension Set . , Anesthesia Breathing Circuits - 33-87 ( 84 Cm-221 Cm ) Adult Expandable Circuits . , Anesthesia Breathing Circuits - 72 ( 183 Cm ) Adult Circuits With Gas Sampling Connectors . , Anesthesia Silicon Airwaysize - 000, 00, 0, 1, 2, 3, 4, 5, 6 , Angio Kit , Angiographic Catheters 5F Al 1.0 , Angiographic Catheters 5F Al 2.0 , Angiographic Catheters 5F Ar 1.0 , Angiographic Catheters 5F Ar 2.0 , Angiographic Catheters 5F Ima 1.0 , Angiographic Catheters 5F Jl 3.0 , Angiographic Catheters 5F Jl 3.5 , Angiographic Catheters 5F Jl 4.0 , Angiographic Catheters 5F Jr 3.5 , Angiographic Catheters 5F Jr 4.0 , Angiographic Catheters 5F Mpa 1.0 , Angiographic Catheters 5F Ntr , Angiographic Catheters 5F Pigtail 110Cm , Angiographic Catheters 5F Pigtail 150Cm , Angiographic Catheters 5F, 6F , Angiographic Catheters 5Ftig 1 , Angiographic Catheters 6F Al 1.0 , Angiographic Catheters 6F Al 2.0 , Angiographic Catheters 6F Ar 1.0 , Angiographic Catheters 6F Ar 2.0 , Angiographic Catheters 6F Ima 1.0 , Angiographic Catheters 6F Jl 3.5 , Angiographic Catheters 6F Jl 4.0 , Angiographic Catheters 6F Jr 3.5 , Angiographic Catheters 6F Jr 4.0 , Angiographic Catheters 6F Mpa 1.0 , Angiographic Catheters 6F Ntr , Angiographic Catheters 6F Pigtail 110Cm , Angiographic Catheters 6F Pigtail 150Cm , Angiographyintroducer Set 5, 6, 7, 9 Fr With 15 & 23 Cm , Angiographyintroducer Sheath 5, 6 , 7, 9 Fr 15 Cm, 23Cm , Angiojet Boston , Ankle Brace S / M / L , Ankle Wrap S / M / L , Anti - D 50Iu Inj. , Anti Fungal Eye Ointmentointment , Anti Microbial Gloves Size - 6 To 8 , Anti Rabies Immunoglobulininj. , Anti Rabies Vaccines Curently Aooroved For Use In India Through Id Route Are Rabipur ( Pcec ) ( Verv ) , Abhayrab ( Pvrv ) And Pasteur Institute Of India, Coonoor ( Pvrv ) 1Ml Inj. , Anti Snake Venom Antiserum30 Ml Vial Polyvalent Anti Snake Venum Serum Enzyme Refined Reconstitute With10 Ml Of Sterile Water For Ection. Contain Equivalent Of 10 Ml Ofpurified Equine Globulin, 1 Ml Of Reconstitutedserum ( Powder Foam ) Inj. , Anti Uv Impregnated Pe Extension Tube For Light Sensitive Drugs.L-200Cm.. , Anti Uv Impregnated Pe Extension Tube For Light Sensitive Drugs. L-150Cm.. , Anti- Uv Impregnated Polyethylene Extention Tube For Light Sensitive Drugs, L- 150Cm, 200Cm. , Antibiotic Impregnated Medium Pressure Shunt / Shunt Should Be Impregnated With Rifampicin And Clindamycin Hydrochloride. It Should Leach Out For At Least 28 Days. Both Catheters To Have An Inner Diameter Of 1.3 Mm And An Outer Diameter Of 2.5 Mm And Should Have X-Ray Deductible Markings. . , Antimicrobial Silver Dressing With Nanocrystalline Technology 10X120 Cm , Antirust Solution With > 30% Phosphoric Acid- 1 Ltrsolution , Antiseptic Lotion ( Hospotal Const. ) Chlorodemine Glouconatesolu Ip 7.5%V / V +Cetrimide Ip15%W / V 1 Lt.Bot. Liquid , Aortic Punch Long Handle A Conical Tip Should Be There For Easy Insertion By Straight Orbutton Hole Technique, Ten Blade Sizes Fortrimming To Desired Size And Shape. Sizes - 3.5, 4Mm , Aortic Root Cannula With Vent Lineradioopaquetipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 , Aortic Root Cannula With Vent Line Radioopaque Tipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 12, 14Fr , Aortic Root Cannula With Vent Line Radioopaquetipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 , Applic-Instr F / Sternal Closure Implants , Aprin Polyster Std Size , Aqueous Solution Of Haemocoagulase, Isolated From Bothrops Atrox 0.2 Cu , Chlorhexidine Gluconate Solution Ip 0.1% V / V ( As Preservative ) 10Mlnasal Drop , Arm Pouch ( Regular ) S / M / L , Armored Tube Made Of100% Siliconized Latex, Radio Opague, Mounted Connector, Pilot Balloon With Universal Port Size- 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 . , Armored Tube Made Of 100% Silicon, Radio Opaque, Should Have Prefilled Stylet Mounted Connector, Pilot Balloon With Universal Port.All Sizes. Fda / Ce Approved All Sizes. Fr- 2, 2.5 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 , Arterialcatheter With Flow Switch Andstraight Guide Wire, G-18, L-6 / 13Cm . , Arterialcatheter With Flow Switch Andstraight Guide Wire, G-20, L-6 / 13Cm . , Arterial Cannulawith Flow Switchmechanism20 G , Arterial Catheter Made Of Polyurethanematerialwith Integral Extension Line.Havingangeled Suture Wingswith Lowprofile . Size 20 G , Arterial Catheter Made Of Polyurethanematerialwith Integral Extension Line.Havingangeled Suture Wingswith Lowprofile . Size - 18 G , Arterial Catheter With Straight Guide Wire G-20, L-8Cm, G-18, L- 10Cm . , Arterial Filter Adult The Arterial Filter Should Be For Adult Use. , Arterial Line 20G X 8Cm , Arterial Line 22G X 6Cms / 8Cms , Arterial Puncture Needle18 G , Arteriotomy Shunts ( Intracoronary Long Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.5, 2.0 , Arteriotomy Shunts ( Intracoronary Long Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.5, 2.0 , Arteriotomy Shunts ( Intracoronary Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.25, 1.5, 1.75, 2.0, 2.25, 2.5, 2.75 & 3.0 , Arteriotomy Shunts ( Intracoronary Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.00, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5, 2.75 & 3.0 , Artesunate + Sulphadoxine + Pyrimethamineip ( Age Group 15 Or Above ) ( 200 Mg ( 3Tab ) + 750 Mg ( 2Tab ) + 37.5 Mg ( 1Tab ) ) , Combi Blister Pack , Artesunate 100 Mg ( 3 ) + Sulphadoxine750mg + Pyrimethamine 37.5Mg Ip ( 1 ) Age Group Between 5 To 8 Years Tab. , Artesunate Lets ( 3 ) 200 Mg And 2Lets Of Sulphadoxine 750 Mg + Pyrimethamine 37.5 Mg Lets Ip ( Age Group 15 Or Above ) Tab , Artificial Heart Valve Bileaflet Mitralmade Up Of Pure Pyrolytic Carbon, Optimal Profile Height, Should Have 80-90 Degree Leaflet Opening Angle, Should Have Flared Inlet At Inflow Sizes- 25, 27, 29, 31 , Artificial Heart Valve Bileaflet Mitral Bileaflet Mechanical Heart Valve Rotatable, The Material Used Is Pyrolytic Carbon On A Graphite Substrate, 80-90 Degree Opening Angle Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Artificial Heart Valve Single Leaflet Mitralmade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle, Should Have Flared Inlet At Inflow, Sizes- 25Mm, 27Mm, 29Mm, 31Mm , Artificial Heart Valve Single Leaflet Mitral Sinlge Leaflet Tilting Disc Mechanical Heart Valve Rotatable Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Ascorbic Acid ( 75 Mcg ) + Vitamin D3 ( 400 Iu ) + Biotin ( 150 Mcg ) + Cyanocobalamin ( 7.5 Mcg ) + Zinc Sulphate Monohydrate ( 63 Mg ) Tab , Ascorbic Acid ( Vitamin C ) I.P. 500Mgtab , Ash Brace S / M / L , Aspiration Catheter , Aspiration Catheter 6F, 7F , Aspiration Pump Aspiration Pump , Along With 1000Mi Disposable Vacuum Cannister Capable For Maintaining And Delivering Pure Vacuum Should Be Dgci And Usfda Approved , Aspiration Pumpaspiration Pump , Along With 1000Ml Disposable Vacuum Cannister Capable For Maintaining And Delivering Pure Vacuum Should Be Dgci And Usfda Approved , Aspiration Tubing For Connection With Aspiration Pump Should Be Dgci And Usfda Approved , Aspiration Tubingfor Connection With Aspiration Pump Should Be Dgci And Usfda Approved , Aspirin ( 75Mg ) + Atorvastatin ( 20Mg ) + Clopidogrel ( 75Mg ) Tab. , Aspirin Low Dose 75Mgtab , Asthalin Nebulization Solution1 Solution , Atenolol . - 100Mg Tab. , Atraumatic Dual Density, Flexible, Ultra Soft, Round Distal Tip Catheter For Closed Suctioning With Bronchoscopy Provision , Atropine Sulphate Eye Drops - 1% ( 5 Ml Vial ) Eye Drop , Atropine Sulphate Eye Ointment 1% ( 3 Gm Tube ) Eye Ointment , Auto Collect Single Device Blood Container For Collection And Storage With Plain Polystyrene Crystals. Sterilized, Needle1, Red Cap1, Female Luer White Lock Cap, Self Destroy Plunger , Capacity- 3Ml, 5Ml. . , Av Cassette Blood Lines Adult + Filtrate Line ( A / V 143 Ml ) Compatible With Multifiltrate Machine , Avigomicro Guide Wire , Avigo Micro Guide Catheter , Azathioprine 50Mg. Cap. , Azithromycin Eye Ointment , B.B Silk ( 12 Foils / Pkt ) ( 3 / 8 Rcut Needle 45 Mm Length 76 Cm, Size 2 / 0 ) ) , Consumable , B.B Silk Size-3 / 0 ( 12 Foils / Pkt ) ( 3 / 8Cir Rcut Needle 26Mm Length 76 Cm ) , Needle , B.B Silk With 1 / 2 Cir Rb Needle Size:1 / 0 20 Mm Length 75 Cm Non Absorbable Surgical Sutures Usp Surgical Material , B.B Silk With 1 / 2 Cir Rb / Cutting Needle 30 Mm Length 75 Cm Non Absorbable ( Size 2-0, 12 Foils / Pkt ) , Consumable , B.B. Silk 6 Reels X 25 Mts Length 25 Mts.Black Braided Silk Without Needle In Reels Non Absorbable Surgical Sutures Usp-, 2-0 ( 6 Reels Is Per Box Rate Should Be Quoted For 6 Reels ) , Surgical Material , B.B. Silk 6 Reels X 25 Mts Size:1 / 0 ( 6 Reels Is Per Box Rate Should Be Quoted For 6 Reels ) , Surgical Material , B12.500Mg. Inj. , Baby Care Sheets Super Absorption Surface, Spill Proof, Antimicrobial Finish, Easy To Wash, Size: 0.7M X 0.5 M , Baby Drape Translucent Soft Polyfilm ( Size-1.2X1.2M ) Incise Area 25X20cm. . , Baclofen 25 Mg Tab. , Baclofen 30 Mg Tab. , Baclofen 5 Mg Tab. , Bain Circuit , Bains Circuit ( Ce Certified ) ( Set Comprisingpatient End Mount, 22Mm Corrugated Plastic Hose X 1.6 Mtrs Long, Short Tubing Nipple, 22Mm / 22Mm Male / Female Circuit Adaptors X2, Distal End Mound, Long Tubing Nipple, Pvc Tubing X3mtrs, 22Mm Heidbrink Expiratory Valve 158Mm / 22Mm Angle Mount, 2Ltr. Breathing Bag, With Mount, 23Mm Male Plug In Mount ( 9012 ) , 23Mm / 23Mm, Female / Famale Circuit Adaptor ( 9036 ) In A Plastic Bag Finish. . , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 10Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 10 Mm. Used Tor Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 10Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 10 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 15Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 15 Mm. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved. , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 15Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 15 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved. , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 20Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 20 Mm. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 20Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 20 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcation Aneurysm Coiling 4Mm Diameter Intracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 4 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascuiar Purpose.Shouldbe Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcation Aneurysm Coiling 4Mm Diameterintracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 4 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcationaneurysm Coiling 7Mmdiameter Intracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 7 Mm Used For Treatment Of Vascular Occlusive Disease & Bai|Oon Assisted Coiling Of Termina & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcationaneurysm Coiling 7Mmdiameterintracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 7 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Baloon Cahtheter4, 5, 6, 7, 8 Mm With 4, 6, 8, 10 Cm , Baloon Inflammation Pump20, 40Atm , Band Ligator Set , Bandage, Cast Plaster, 6X 5 . , Bandage, Cast Plaster, 6X 5Y . , Bandage, Plaster, Xfst 5X5yd . , Barium Sulphate500 Gm.Powder , Barium Sulphate Power Susp 95% W / V, Powder ( Hd ) 95% W / V 250% W / V 400 Gram100 Solution , Battery Operated Articulating Laparoscopic Vascular Stapler With 4 Rows Staple Line Of 35Mm, 30Mm Cut Line, 360 Degrees Rotation, 50 Degrees Articulation On Both Sides, 9Mm Shaft Width , Battery Operated Powered Circular Stapler With 3 Dimensional Stapler Design And Atraumatic Gripping Surface For End To End Anastomosis Size 21Mm / 23Mm / 25Mm / 29Mm / 31Mm , Bcg ( 1 Ml Each ) , Syrings , Beclomethasone Inhalation I.P. 200 Mcg Per Dose Inhaler , Benzathine Penicillin 6 Lac Inj. , Benzyl Nicotinate ( 2Mg ) + Heparin ( 50Iu ) Ointment , Benzyl Penicillin, I.P 10 Lac Vial Inj. , Betamathasone 0.1%, 5Ml Eye Drop , Betamethasone Dipropionate Ointment 0.05% ( 15Gm ) Tube Ointment , Betamethasone Valerate + Gentamicine Sulphatetolnafrate+ Iodochlorhydroxyquin Ointment , Betamethasone Valerate +Gentamycine Cream 0.1% + 3%, 10Gm. 0.1% + 3%10 Gm Cream , Betamethasone Valerate 0.0012 Ointment , Betamethosome Valerate Ointment Cream Ip 0.12% 15Gmointment , Bilary Stent Double Pigtail 10 Fr - 10 Cm Length , Bilary Stent Double Pigtail 10 Fr - 7 Cm Length , Bilary Stent Double Pigtail 7 Fr - 10 Cm Length , Bilary Stent Straight 10 Fr - 10 Cm Length , Bilary Stent Straight 10 Fr - 7 Cm Length , Bilary Stent Straight 7 Fr - 10 Cm Length , Bilary Stent Straight 7 Fr - 7 Cm Length , Bilary Stentdouble Pigtail 7 Fr - 7 Cm Length , Bilary Stents , Bilbao Dotter , Bilbao-Dotter Hypotonic Duodunography Sets- 14F, Tube Length125 Cm, Tube Sideports 06, Tube Tip- Closed End, Torque Cable Diameter- 0.0625, Torque Cable Length -125Cm. , Biliary Balloon Catheter ( Triple Lumen ) Disposable , Biliary Stent - Tannebaum , Biliary Stents10x100, 10X120 And 10X80 , Bioabsorbable & Biocompatible Highly Porous & Sponge Based Adhesion Free Wound Dressing For Sinu-Nasal Cavity Size 8Cm X 2Cm , Bioabsorbable& Biocompatible Highly Porous & Sponge Based Adhesion Free Wound Dressing For Sinu-Nasal Cavity Size 8Cm X 2Cm , Biodegradable Material Biomatress Cover Mattress Protection Sheath For Infant And Neonates Non Allergic, Latex Free, Environmental Friendly Size.Fda / Ce Certified. . , Biopsy Forcep For Endoscopic Upper Gi , Biopsy Forceps Lower Gi Endoscopy , Bioresorbable High Absorbent Pur Easter Foam For Endoscopic Sinus Surgery. Size-4 / 8Cm. Fda Approved . , Bi-Pap Full Face Mask Kit ( Adlut ) , Bi-Pap Full Face Mask Kit ( Pediatrics ) , Biphasic Isophane Insulin30 / 70 40Iu / Ml ( 10 Ml Vial ) Inj. , Biphasic Isophane Insulinip ( 30% As Soluble Insulin & 70% As Isophane Insulin ) , Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Suspension Contains 40 Iu ( 10Ml Vial ) Inj. , Bipolar Cautery Forceps Bayonet Shaped 6 Inches Working Length, 1Mm Tip , Bipolar Cautery Forcepsbayonet Shaped 8 Inches Working Length, 1Mm Tip , Bisacodyl - 5Mg Tab , Bisacodyl ( 5 Mg ) , Suppository , Bishmuth 500 Gm Powder , Bisoprolol 10Mg Tablets , Bi-Spectral Index Monitor For Measuring The Depth Of Anaesthesia , Black Braide Silk Reel 2-0, 25Mtr , Black Braide Silk Reel 3-0, 25Mtr , Black Braide Silk Reel 4-0, 25 Mtr , Black Braided Silk - Reels -Size 1 , Black Braided Silk - Reels -Size 2-0 , Black Braided Silk - Reels -Size 3-0 , Black Braided Silk - Size : 1-0, 1 / 2 Circle R C, 38Mm, 75Cm ( Each Foil ) , Black Braided Silk - Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm ( Each Foil ) , Black Braided Silk Nonabsorable Suture Usp Size 0 30Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Oval Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 22Mm, 1 / 2 Circle Oval Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 6 / 0 10Mm, 3 / 8 Circle Rc Micro Point, 38Cms , Black Braided Silk Nonabsorable Suture Usp Size 6 / 0 8Mm, 3 / 8 Circle Rc Micro Point, 38Cms , Black Braided Silk Nonabsorable Suture Usp Size 8 / 0 8Mm, 3 / 8 Circle Spatulated Micropoint, 38Cms Virginsilk , Black Braided Silk Reels Non Sterile Size 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 1 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 2 / 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 3 / 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 4 / 0 ( 25 Mtr ) , Black Braided Silk With Needle Suture , 1 / 2 Circle Round Body , 30Mm, 90Cm, 2-0 , Black Braided Silk With Needle Suture , 3 / 8 Circle Cutting, 45Mm, 76Cm, 2-0. , Black Braided Silk With Needle Suture , 3 / 8 Circle Cutting, 60Mm, 76Cm, 1No. , Black Braided Silk* 1 75Cm , 37Mm, 1 / 2 Circle, Taper Point, Black , Black Braided Silk* 2-0 75-76Cm , 25-26Mm, 1 / 2 Circle, Tapercut, Black , Black Braided Silk* 3-0 75-76Cm , 20Mm, 1 / 2 Circle, Taper Point, Black , Bladder Wash Syringe, 60Ml Or 70Ml, Piston Type , Blades For Craniotome ( Manman ) , Bleaching Powder Gr-Ii Is 1065 / 1989 With Upto Date Amendment Packed In 25 Kg Hdpe Bags Isi Marked Stable , Blood Administrations Set , Blood Bag Double 350 Ml . , Blood Bag Single 350 Ml . , Blood Bag Transfer 350 Ml . , Blood Bag Triple 350 Ml . , Blood Bag Triple 350 Ml Sagm . , Blood Glucose Testing Strip For Glucometer ( Compatible Glucometer Should Be Made Available Without Cost One For Every 500 Strip With Replacement Guarenty ) ( 50 Strip Box ) . , Bluthane Stent , Bmv Set 22, 24, 26 , Body Double Arm Needle , Bone Wax , Bone Wax , Bone Wax Sterile 2Gm , Bone Wax Sterile Usp , Boric Acid Ear Drops 10Ml Vial , Bosentan 62.5Mgtablets , Boswellin Cg 1.00% W / W Arbutin 0.5 % W / W Licorice Extract 40% Ca 1% W / W Coriander Seed Oil 0.3 % W / W In A Cream Base Tube Of 15 Gmcream , Bougie With Oxygen Port -Adult Size , Bougie With Oxygen Port -Adult Size And Paediatric Size , Bougie With Oxygen Port -Paediatric Size , Bovinebio Prosthetic Heart Valve Mitralshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Bovine Bio Prosthetic Heart Valve Aorticshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size- 19Mm, 21Mm, 23Mm , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 8In X 10In ( 20Cm X 25Cm ) 8In X 10In ( 20Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 2In X 2In ( 5Cm X 5Cm ) 2In X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 4In X 10In ( 10Cm X 25Cm ) 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 4In X 5In ( 10Cm X 12.5Cm ) 4In X 5In ( 10Cm X 12.5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer-Meshed ) Integra Meshed Dermal Regeneration Template ( 4In X 10In ( 10Cm X 25Cm ) 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer2in X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer8in X 10In ( 20Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer 4In X 5In ( 10Cm X 12.5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin2in X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin 4In X 5In ( 10Cm X 12.5Cm ) , Braided Coated Polyester Non Absorbable Suture Usp Size - 2, 44.8Mm, 1 / 2 Circle Tc Heavy, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Rb Sh, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 3 / 0 26Mm, 1 / 2 Circle Rb Sh, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 4 / 0 8Mm, 1 / 4 Circle Spatulated Micro Point, Green 90Cms , Braided Coated Polyester Non Absorbable Suture Usp Size 5 55Mm, 1 / 2 Circle Tc Heavy, 75Cms Green , Braided Long Sheath 6Fx45cm , Braided Long Sheath 6Fx65cm , Braided Long Sheath 7Fx45cm , Braided Long Sheath 7Fx65cm , Braided Polyamide * 0 6X45cm Pre-Cut , Blackmm , Braided Polyamide * 0 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 1 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 2-0 12X45cm Pre-Cut , Blackmm , Braided Polyamide * 2-0 7X75cm Pre-Cut , Blackmm , Braided Polyester ( Green / Blue / White ) 75 Cm, 2-0, Ptfe Firm Pledget ( Oval / Square ) 3Mm X 6Mm X 1.5 Mm, 25Mm 1 / 2 Circle Taper Point / Cut Double Arm ( 10 / 8 Sutures Per Foil ) ( Preferably Us Fda Aproved ) , Braided Polyester ( Green / Blue / White ) 75 Cm, 2-0, Ptfe Firm Pledget ( Oval / Square ) 3Mm X 6Mm X 1.5 Mm, 16-17 Mm 1 / 2 Circle Taper Point / Cut Double Arm ( 10 / 8 Sutures Per Foil ) ( Preferably Us Fda Aproved ) , Braided Polyester 2-0 1X30 / 75Cm Da, Oval / Squarepledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm ( Preferably Us Fda Aproved ) , Braided Polyester 2-0 Blue 1X30 / 75Cm Da, Oval Pledget 3X6mm, Soft Pledget, Taper Point, 1 / 2 Circle, 16Mm ( Preferably Us Fda Aproved ) , Braided Polyester 75 Cm 2, 45Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Braided Polyester 75-76 Cm 2-0, 16-17 Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Braided Polyester 90 Cm 2-0, 25Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Breast Tissue Marker 17G. Rigid Needles Dual Trigger With Lifetime Visibility . , Bromelain 90 Mg+Rutoside Trihydrate 100 Mg+Trypsin-Chymotrypsin 50000 Au Tab. , Bromfenac, 5Ml Eye Drop , Bromocriptine 2.5 Mg Tab. , Broviac 2.7Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff With Basic Tray. , Broviac 4.2Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Broviac 6.6Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Bs Oxygen Connector For Ventilator , Bt Set With Luerlock , Budesonide Nasalspray , Budesonide Nebulising Suspension ( 0.5Mg / 2Ml Respule ) -Pack Of 5Respules , Budesonide Respules 0.25Mg / 2Mlrespule , Buprenorphine 0.3 Mg / Ml 1 Injection , Buprenorphine T.D. Patch 1 Mg Td Patch , Buprinorphine Patch 5, 7.5, 10, 15, 20 Micro Gm Per Hr , Buretteinfusion Set , Burs For Craniotome ( Manman ) , Butorphanol 1 Mg 2 Ml Ampoule Injection , Button Switch Pencil With Ptfe Coated Ez Clean Electrosurgical Tip , Button Switch Pencil With Ptfe Coated Modified Ez Clean Electrosurgical Tip , C 1, 2, 3Catheter5 F 90Cmand 65Cm , C ) Triple-Lumen Tip To Prevent Clogging Inside The Applicator , C.T.G. Paper Roll . Roll , Cabergoline 0.25Mg. Tab , Cable Plastic Strap Tie Lock Locked Tie , Caffeine ( 1Ml ) Syp. , Caffeine ( 1Ml ) Vial Inj. , Caffeine ( 2Ml ) Syp. , Caffeine ( 2Ml ) Vialinj. , Caffeine 60 Mg / 3Ml Injection , Calamine 500 Gm Powder , Calcitonin 200 Iu ( Nasal Spray ) , Calcitriol 0.25 Mcg+Elemental Calcium 200 Mg+Elemental Zinc 7.5 Mg+Ibandronic Acid 150 Mg Tab. , Calcitriol 0.25 Mcg+Elemental Calcium 500 Mg+Elemental Magnesium 50 Mg+Elemental Zinc 7.5 Mg+Ibandronic Acid 150 Mg+Vitamin K2-7 50 Mcg Tab. , Calcitriol 0.25 Mcg+Elemental Calcium 500 Mg+Elemental Zinc 20 Mg+Ibandronic Acid 150 Mg Tab. , Calcium 500 Mg + Vit D3 Sup , Calcium Aspartate Anhydrous 560 Mg Eq. To Elemental Calcium 75 Mgcap. , Calcium Carbonate 500 Mg Tab. , Calcium Chlorideinj. , Calcium Citrate 500Mg With Vitamin D3 200Mcg Tablet , Calcium Gluconate 10% 0F 10 Ml Ampoule Injection , Calcium Plolystyrene Sulphonate Powder 15Gm. Powder , Calcium With Vitamin D Tablets Usp Calcium Carbonate 1.25G Eq. To Elemental ( Calcium 500Mg And Cholecalciferol Ip 250 Iu ) , Tablet , Camera Cover , Canister With Gel Contains Isolizer & Filter. Size 500 Ml. Usfda Approved . , Canula Hub Protector Device Integrated With 70% Isopropyl Alcohal. Single Pack Sterilized . , Capamantadine 100Mg. Tab. , Carbamazepine 400Mg Tab. , Carbamizepine ( Standard Size ) Syp. , Carboxy Methyl Cellulose And Lipophillic - Tlc Agdressing, Size 10 Cm X 12 Cm , Carboxy Methyl Cellulose And Lipophillic - Tlc Ag Dressing, Size 15 Cm X 20 Cm , Cardioplegia Adapters - Y Types , Cardioplegia Heat Exchanger ( Bcd ) It Should Have Priming Volume Less Than 50 Ml, Blood Flow Rate Should Be Between 0 To 600 Ml / Min, Filter Pore Should Be Around 100 Um, Inlet Connection Should Be 1 / 4 , Outlet Connection Should Be 3 / 16. Heat Exchange Surface Area Should Be ?.20M 2, Heat Exchange Should Be Of Stainless Steelcorrugated / Convoluted Pipes. Bubble Trap Should Be Integrated For Highly Efficient Debubbling, Exchangeable Water In / Water Out Blood Flow Path Bottom Up It Should Have A Stopcockprime / Perfusion For Easypriming. It Should Have Tip In The Surgeon Pack So That It Can Beconnected To Cardioplegia Cannula. It Should Be Available Both In 4:1 Configurations. , C-Arm Cover , Carnitine 10 Ml Inj. , Cassette ( Blue Sensitivity ) 10 X 12 , Cassette ( Blue Sensitivity ) 12 X 12 , Cassette ( Blue Sensitivity ) 12 X 15 , Cassette ( Blue Sensitivity ) 12 X 6 , Cassette ( Blue Sensitivity ) 14 X 14 , Cassette ( Blue Sensitivity ) 14 X 17 , Cassette ( Blue Sensitivity ) 15 X 6 , Cassette ( Blue Sensitivity ) 6½ X 8½ , Cassette ( Blue Sensitivity ) 8 X 10 , Cassette With Intensifying Screen ( Blue Sensitivity ) 10 X 12 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 12 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 15 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 6 , Cassette With Intensifying Screen ( Blue Sensitivity ) 14 X 14 , Cassette With Intensifying Screen ( Blue Sensitivity ) 14 X 17 , Cassette With Intensifying Screen ( Blue Sensitivity ) 15 X 6 , Cassette With Intensifying Screen ( Blue Sensitivity ) 6½ X 8½ , Cassette With Intensifying Screen ( Blue Sensitivity ) 8 X 10 , Cast Bendage . , Cath Tap , Catheter Mount Expandable , Catheter Stabilization Device With Medical Grade Pvc Clamp Should Have Chlorhexidine Sterilizing Swab And Id Tag ( Large ) . , Catheter Stabilization Device With Medical Grade Pvc Clamp Should Have Chlorhexidine Sterilizing Swab And Id Tag ( Medium ) . , Catheter With Distally Mounted Non Compliant Balloon All Sizes , Cefdinir 1Gam. Inj. , Cefdinir 300 Mgcap. , Cefuroxime 30 Ml Syp. , Cencentrat Acidic Solution For Bicarbonat Dialysis 1.34, 1.83 Proporationing Solution - ( A ) , Sodium Bicarbonate Ip 600Gms. ( B ) , Sodium Chloride Ip Salts 235Gms.- ( C ) ( Abc ) Ffs Bottle 10 Lit.Can Iv , Centesis Drinage Sets , Cerebral & Somatic Oximeter Which Measures Rso2 ( Regional Blood Oxygen Saturation ) In The Brain And Skeletal Muscles ( Somatic ) Tissues Of The Body With The Help Of Nirs ( Near Infra Red Spectroscopy ) Technology. , Cerebral Protection Device , Cervical Ripering Baloon For Mechanical Dilation L-40Cm. Fr.-18, Balloon Capacity 80Ml . , Cetrimide + Choline Salicylate Gel For Oral Ulcer ( 0.01%+8%All / W / V ) 15 Ml 1 Solution , Cetrimide Cream Bp 20Gmointment , Chalk Powder 400Gms , Channel Hangers 10 X 12 , Channel Hangers 12 X 12 , Channel Hangers 12 X 15 , Channel Hangers 12 X 6 , Channel Hangers 14 X 14 , Channel Hangers 14 X 17 , Channel Hangers 15 X 6 , Channel Hangers 6½ X 8½ , Channel Hangers 8 X 10 , Cheprhonguiding Catheter6 Fr. , Chest Bag Size - 20, 24, 28, 32 , Chest Drainage Bottle Under Water Seal Drainage System. Double Chamber Compactunit With 2000 Ml Capacity , Chest Stand , Chibaneedle 21Gwith15 & 20 Cm Long , Chicken Pox Vaccine > 2000 Pfu Inj. , Chloramphenicol 250Mg Cap. , Chloramphenicol Eye Applicaps 1% ( 1X100 ) 1X100 Eye Drop , Chloramphenicol Eye Drops 1%, 5Ml Eye Drop , Chloramphenicol With Ploymyxin B Sulphate, 0.5%+5000Iu+0.5%, 5Ml 0.5%+5000Iu+0.5%5 Ml. Eye Drop , Chloramphenicol, Hydrocortisone 5Gm. Ointment Tube , Chlordipoxide-25Mg. Tab. , Chlorhexidine Gauze Dressing10cm X 10Cm. , Chlorhexidine Gluconate + Metronidazoe 20 Gm Tubeointment , Chlorhexidrine200 Solution , Chlorocol 0.5% Eye Drops , Chlorocresol 0.100%W / W, Clobetasol Propionate 0.050 % W / W, Miconazole Nitrate 2% W / W, Neomycin Sulphate 0.500 % W / W 15Gmointment , Chloroquine Phosphate - 250Mgtab , Chloroquine Phosphate40mg / Ml ( 5 Ml Amp ) Inj. , Chloroquine Phosphate60mg / Ml 3Ml Vial Inj. , Chloroquine Phosphate Suspension Equivalent To Chloroquine 50Mg / 5Ml ( 60 Ml Bottle ) Syp. , Chloroxylehol 4.8 W / V Terpineol 9% Alcohol 1800 Solution , Chlorphenamine 10Mg / Ml Solution For Injection , Chlorphenamine Maleate 100Ml Syp. , Chlorphenamine Maleate Amp / Vial 22.7Mg. Inj. , Chlorpheniramine Maleate Ip, 0.01% W V Eye Drops 5Ml 5Ml Eye Drop , Chlorpromazine 100Mg. Tab. , Chlorpromazine 50Mg. Tab. , Chlorpromazine Ip 25Mg Inj. , Chlorpromazine, 25Mg / Ml, 2Ml Amps Injection , Choline Salicylate Ip 9% W / V, Benzalkonium Chloride Solution Ip 0.02% 10Ml 10Ml Ointment , Chromium 0.4Mg., Copper 0.4Mg., Manganese 0.1Mg., Selenium 0.02Mg. Inj. , Chromostate 2Ml Inj. , Cilostazol 50 Mg Tab. , Cinacalcet 30Mg Tablets , Cinitapride 3Mg Extended Release Tab , Ciprofloxacin Eye Ointment 0.3% ( 3Gm Tube ) Eye Ointment , Citicholine 60Ml Syp. , Clavical Brace With Velcro S / M / L , Click Type Y Connector With Extn. Line Kit , Clindamycin 150 Mg Cap. , Clinical Thermometer. , Clobetasol Propionate 0.05 %W / Vlotion , Clobetasol Propionate 0.05 %W / W+Fusidic Acid 2 %W / Wointment , Clobetasol Propionate Bp 0.05% W / W Salicylic Acid 3.0% 30Gm Ointment , Clobetasol Propionate Bp, 0.05% W / W Gentamicin ( As Gentamicin Sulphate Ip ) 0.1% W / W Chlorocresolip ( As Preservative ) 0.1% W / W20gmointment , Clobetasone 0.05% + Gentamycinointment , Clobetasone 17 Butyrate 0.0005 Ointment , Clobitasol Proprionate 0.5% ( Lobate ) 15Gm Tube Cream , Clofazimine 100Mg. Cap. , Clomiphene Citrate 25 Mg Tab , Clomiphene Citrate 50 Mg Tab. , Clonazepam 2 Mg Inj. , Clonidine 150 Micro Gm / Ml Injection , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Large 26Cmx16cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing - Pu Foam Size Small 10Cmx8cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing - Pu Foam Size Small 18Cmx13cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Suction Drainage System All Size , Closed Suction Systemsystem Should Have Filtration System Along With Rotating Patient Access Valve To Enable Complete Isolation Of The Sleeved Suction Catheter From Patient Airway When Suctioning Is Not Required.System Should Have 03 Micron Hydrophobic Filter For Immediate Visual Identification Of Ch Size And Flushing Port Which Should Swivels 360 Degrees And Should Be Equipped With Built-In Non-Return Valve , Closed System For Hourly Urine Measurement - Closed Urine Measuring System With Graduated Transparent Chamber Starting From 1 Ml To 500Ml Capacity, Consisting Of Fine Measuring Sections With A Capacity And Two Non Return Valve, Collection Chamber. Dual Chambered 120Cm Kink Resistant Tubing, Tapered Connector With Kombicon Needle Free Sampling Port, Flexible Fastening Strap For Easy Hanging. Sterile Individually Packed In Peel Open Pack With 2 L Storage Capacity, , Closed Wound Suction Unit Size 12Fg , Closed Wound Suction Unit Size 14Fg With 800 Ml Chamber , Closed Wound Suction Unit Size 16Fg , Closed Wound Suction Unit Size 18Fg , Clotrimazole ( Vaginal Tab ) 500 Mg ( With Applicator ) , Tablet , Clotrimazole + Beclomethasone Eye Drop, 5Ml Eye Drop , Clotrimazole Ear Drop, 10Mleye Drop , Clotrimazole Vaginali.P. - 100Mg ( With Applicator ) Tab , Cloxacillin 500 Mg Cap , Cmc And Lipophillic - Tlc Colloid Contact Layer, Size 10 Cm X 10 Cm , Cmc And Lipophillic - Tlc Colloid Contact Layer, Size 15 Cm X 20 Cm , Coated, Braided Lactomer 91* 0 90Cm, Violet37mm1 / 2 Circlereverse Cutting , Coated, Braided Lactomer 91* 0 90Cm, Violet40mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 1 90Cm, Violet40mm1 / 2 Circlereverse Cutting , Coated, Braided Lactomer 91* 1 90Cm , Violet40mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 2-0 75Cm, Violet30mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 2-0 90Cm, Violet37mm1 / 2 Circlereverse Cutting , Coaxial Breathing Circuit -- It Should Be 1.8 Meterin Length+ T Piece+ Swivel Elbow Withleur Port And Cap + One 50 Cm Collapsible Circuit Adult , Codan Iv Drip Set , Codeine Phosphate 10 Mg+Triprolidine 1.25 Mg / 5Ml 100Ml Syp. , Codman Scalp Clip Forceps . , Coils For Embolization 35-5-5 / 35-5-6 / 35-5-7 , Colchicine 0.6 Mg Tablets , Collegin Dressing 2X2 & 4X4 , Colobag25 X 14Cm. , Colostomybag All Size , Colostomy Kit , Compact Portable Bedside Pulse Oximeter For Continuous Monitoring Of Spo2, Pulse Rate & Signal Strength , Complete Absorbable Mesh Fixation Device With Minimum Strap Length 7.0 Mm2 Point Fixation To Hold The Mesh And Device. 25 Absorbable Straps , Conectors For Cp Bypass 1 / 2X 1 / 2 X1 / 2 - ( Y Connector ) , Conectors For Cp Bypass 1 / 2X1 / 2 ( Single Connector ) , Conectors For Cp Bypass 1 / 2X3 / 8 ( Single Connector ) , Conectors For Cp Bypass 1 / 2X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass 1 / 4X Male Connector , Conectors For Cp Bypass 1 / 4X1 / 4 Luer Lock , Conectors For Cp Bypass 1 / 4X1 / 4 ( Single Connector ) , Conectors For Cp Bypass 1 / 4X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X1 / 4 ( Single Connector ) , Conectors For Cp Bypass 3 / 8X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8 ( Single Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8 Luer Lock , Conectors For Cp Bypass 3 / 8X3 / 8X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass1 / 2X1 / 2 ( Single Connector ) , Conectors For Cp Bypass1 / 2X3 / 8 ( Single Connector ) , Conectors For Cp Bypass1 / 2X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass1 / 4X Male Connector , Conectors For Cp Bypass1 / 4X1 / 4 Luer Lock , Conectors For Cp Bypass1 / 4X1 / 4 ( Single Connector ) , Conectors For Cp Bypass1 / 4X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X1 / 4 ( Single Connector ) , Conectors For Cp Bypass3 / 8X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X3 / 8 ( Single Connector ) , Conectors For Cp Bypass3 / 8X3 / 8 Luer Lock , Conectors For Cp Bypass3 / 8X3 / 8X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X3 / 8X3 / 8 ( Y Connector ) , Connector Y&W , Multi , Connector 1 / 2X1 / 2X1 / 2Y Type Connectors , Conquest 40 High Pressure Balloon Non Compliant, Multilayer Peripheral Balloon With Ultra High Pressure Of 40 Atm. With Choice Of 2 Shaft Lengths Of 75 And 120 Cmdiameter ( 5Mm To 12Mm ) & Lengths ( 2, 4, 6, Cm ) . , Conquest Pro 12 , Conquest Pro 9.0 , Container Contains Isolizer To Convert Liquid Into Gel And Filter For Moisture Trap And Odour , Control Syringe 12Ml Rotate Luer , Control Syringe 20Ml Rotate Luer , Controle Syringe 20, 12Ml , Controller Should Be Indicated For Use : Deep Vein Thrombosis And Pulmonary, Embolism Prophylaxis.Controller Should Have Graphic User Interface Of 3.2-Inch Color Lcd & Provide Greater Visibility, Should Have Venous Refill Detection Technology For Superior Emptying Of Veins, Personalize Decompression Cycles For Individual Patients, Should Have Different Compression Level At All The Points ( Ankle, Calf And Thigh ) , Consumables Sleeves Should Have Three Bladders For Giving Optimal, Compression In Different Areas Of The Leg , Convective Patient Warming System For Delivering Warm Air Uniformly To The Patients Through Disposable Blankets , Copper Pipe 12Mm ( Per Meter ) , Copper Pipe 15Mm ( Per Meter ) , Copper Pipe 22Mm ( Per Meter ) , Corbolic Acid 400Gms Powder , Cord Clamp. , Coronary Balloons Abott Complete Sizes Sequencenc , Coronary Balloonsabott Complete Sizes Sequence Sc , Coronary Balloons Otwabott Complete Sizes Sequence , Coronary Dilators , Coronary Snare For Retrieval Of Intravascular Foreign Objects Neurovascular Snare For Retrieval Of Intravascular Foreign Objects Nitinol Shaft With Snare Catheter, Introducer & Torquedevice.Should Be Dcgi And Usfda Approved , Coronary Snare For Retrieval Of Intravascular Foreign Objectsneurovascular Snare For Retrieval Of Intravascular Foreign Objects Nitinol Shaft With Snare Catheter, Introducer & Torquedevice.Should Be Dcgi And Usfda Approved , Corrugated Drainage Sheet Pvc Disposable , Cotrimaxazole Ds 160Mg Tablets , Cotrimaxazole Ds 800Mg Tablets , Cotton Crape Bandage 10Cm X 4M ( Box Of 10 Bandages ) , Craniotome Cutter , Craniotomy Drape Sheet Size 1.6X3.2M. Adhesive Area 20Cm Dia 2 Pockets 15X18cm. 2 Tube And Cable Holders Side Channels And Collecting Funnel Side Channels And Collecting Funnel. Poly Sheet Lining 1.20Cm.X120.M. . , Crape Bandage 2 4 Mt . , Crape Bandage 4 4 Mt. . , Crape Bandage 6 4Mt. . , Cre Balloon 12Mm, 13.5Mm, 15Mm Each , Cross Over Sheath , Crtd Device+ Leads ( Fda Approved Not Ce Approved ) , Crtp Device+ Leads ( Fda Approved Not Ce Approved ) , Crystallineinsulin40 Inj. , Cse Kit- Pencil Point Spinal Needle - 115Mm, Locking Needle Hub, 10Ml Lor Syringe, Flat Filter, Hydrophilic Supported Membrance. . , Curved Blade Having Shaft Diameter 3 Cm & Shaft Leghth 4-9 Cmwith Integrated Hand Activation Control Buttons.Compatible With Gen 11 , Curved Cartridge Having Close Staple Height Of 1.5 Mm ( Blue ) , 2.0 Mm ( Green ) Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Curved Cutter Curved Cutter Closed Staple Height 2.00Mm , Curved Cutter Reloadcurved Cutter Reload Closed Staple Height 2.00Mm , Curved Cutter Stapler Delivering Curvelinear 4 Rows Of Staple And 40 Mm Cut Line In 30Mm Width Having Tissue Retaining Pin, Intermediate Locking Position , Customisedtubing Pack With ( Pediatric ) Design P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Silicon Headsuction / Gas Line 1 / 4 , Customised Tubing Pack With [ Adult ] Designp.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction Silicon / Gas Line 1 / 4 , Customised Tubing Pack With Arterial Filter ( Pediatric ) P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction / Gas Line 1 / 4 , Customised Tubing Pack With Arterial Filter [ Adult ] P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction / Gas Line 1 / 4 , Cutting Burr 4Mm , Cutting Loop, Bipolar, 24 / 26 Fr, For Use With Hopkins Telescope 27005 Fa / Ba, , Cutting Loops ( Single Stem ) Monopolar, For 26Fr Tur , Cvp Manometer , Cyanoacrylate Glue Ection Therapy ( For Oesophageal And Gastric Varices ) , Inj. , Cyanocobalamin 400Mcg + Folic Acid 1Mg + Pyridoxine 10Mg Tablets , Cyanocobalamin 500 Mcg+Folic Acid 15 Mg+Niacinamide 200 Mg - ( Vitcofol 10Ml Inj. ) , Cyclobenzerpine 15 Mg Tab. , Cyclophosphamide 50 Mg Tab , Cytology Brush , Dabigatran100 Mg Tab. , Dabigatran 110Mg Capsule , Dabigatran 150Mg Tab. , Dacron Marking Patch ( Filamentous Fabric ) Should Be Nominal Thickness; Around 0.6 Mm, Water Permeability Approximately 1800Ml, Popularly Known AsMarking Patch.Sizes - ( 2 X2 ) , ( 4X4 ) , ( 6X 6 ) , Dacron Marking Patch ( Filamentous Fabric ) Should Be Nominal Thickness; Around 0.6 Mm, Water Permeability Approximately 1800Ml, Popularly Known AsMarking Patch.Sizes - ( 2 X2 ) , ( 4X4 ) , ( 6X 6 ) , Dafflon ( Micronized Flavonoid Fraction 1000 Mg ) Tab. , Dafflon ( Micronized Flavonoid Fraction 500 Mg ) Tab. , Dalela Female Self Urethral Dilator , Dalela Triple J Stent , Danazol50 Mg Cap. , Dark Room Tank ( 22.5 Lit. ) , Datascopeintra Aortic Balloon 35Cc , Datascopeintra Aortic Balloon 40Cc , Daunorubicin 50 Mg / Vial Vial , Daunorubicin ( 20 Mg / Vial ) , Injection , Deferasirox Dispersible 100Mg Tab. , Deferasirox Dispersible 250Mg Tab. , Deferasirox Dispersible 500Mg Tab. , Deflazacort 12 Mg Tab. , Deflazacort 18 Mg Tab. , Deflux - E- Needle Inj. , Deionized Water 5 Liter 1 Solution , Denali Ivc Filter Optional Ivc Filter With One Piece Nitinol Body, Electropolished Conical Shaped Designwith Dual Level Filtration Having Both Caudal And Cranial Migration Resistant With Anchors Benefit With Highly Visible Snare Tip Seamlessly Welded To The Body For Easy Filter Retrieval Even After Long In-Dwell Times. Gives You Both Femoral And Jugular Approachesfemoral & Juglar , Depo-Provera 150Mg / Ml Ection Inj. , Desferrioxamine 500Mg. Inj. , Desmopressin Acetate Nasal Spray 0.1 Mg / Ml 5 Ml Vial , Desmopressin Inj. , Desmopressin Tab. , Dexamethasone ( 4 Mg ) , Tablet , Dexamethasone 0.1%+ Polyimexin+Chloromphenical 1% 0.1%+1%5 Ml. Eye Drop , Dexamethasone Acetate 0.1 %Ointment , Dexmedetomidine 50 Mcg / 0.5 Mlampoule Injection , Dexrabeprazole Sodium 10Mg Tab. , Dextran70 % Ffs Bottle 500 Ml Iv , Dextran 10 % Dextrose 5 % Nacl 0.9 % Ffs Bottle 500 Ml Iv , Dextromethorphan 10Mg / 5Ml Syrup ( 60Ml Bottle ) Syp. , Dextromethorphan Hydrobromide Ip 10Mg + Chlorpheniramine Maleate Ip 2Mg + Phenylephrine Hydrochloride Ip 5Mg Sugar Free And In Mouth Dissolving Form Tab. , Dextromethorphan Hydrobromide Syrup 13.5 Mg / 5Ml ( 30 Ml Bottle ) Syp , Dextromethorphane Hydrobromide Phenylephrine Hcl Softgel Cap , Dextrose 200 Gm Powder , Dextrose 50% Ffs Bottle 25Ml Iv. , Dextrose 500 Gm Powder , Diagnostic Catheter Sim 1 , Diagnostic Catheter Sim 1 , Diagnostic Catheter Sim2 , Diagnostic Catheter Sim2 , Diagnostic Catheter Vertebral , Diagnostic Catheter Vertebral , Diagnostic Catheterc2 , Diagnostic Catheterc2 , Dialysis Starting Kit Disposable :A Sterile Tray With Top , Dialyzer 1.6- Multiple Use , Diamond Burr 15 Cm X 4 Mm , Diamond Drill Bits Cutting 4 Mm, 6Mm, 8Mm For Asceulaphand Drill , Diazepam ( 5 Mg ) , Tablet , Diclofenac Sodium 0.1, %5 Ml. Eye Drop , Diclofenac Sodium Mouth Garglesolution , Diclofenac Suppository 12.5Mg Suppository , Diclofenac Suppository 25Mg Suppository , Diclofenac Suppository 50Mg Suppository , Dicyclomine- 10Mgtab , Diethylcarbamazine- 100Mg Tab. , Difluprednate5ml Eye Drop , Difluprednate 0.5 Mg+ Moxifloxacin 5Mg 5Ml Eye Drop , Digital X-Ray Cassetts10 X 12 , Digital X-Ray Cassetts14 X 17 , Digital X-Ray Cassetts8 X 10 , Digital X-Ray Cr Machine Films Fuzi Machine ( 8X10, 14X17, 11X14 ) , Digital X-Ray Cr Machine Films Kodak Machine ( 8X10, 14X17, 10X12 ) , Digital X-Ray Dr Machine Films Konika Machine ( 8X10, 14X17, 10X12 ) , Digital X-Ray Filmsize 8 X 10 ( 150 Film Per Pack ) , Digital X-Ray Film ( Make- Fuji ) Size 11X14 , Digital X-Ray Film ( Make- Fuji ) Size 14X17 , Digital X-Ray Film ( Make- Fuji ) Size 8X10 , Digital X-Ray Film ( Make- Kodak ) Size 11X14 , Digital X-Ray Film ( Make- Kodak ) Size 14X17 , Digital X-Ray Film ( Make- Kodak ) Size 8X10 , Digital X-Ray Film ( Make- Konika ) Size 11X14 , Digital X-Ray Film ( Make- Konika ) Size 14X17 , Digital X-Ray Film ( Make- Konika ) Size 8X10 , Digoxin 250Mcg ( 0.25Mg. ) / Ml ( 2Ml Amp ) , Injection , Digoxin I.P. 500Mcg, ( 0.5Mg ) / 2Ml Inj. , Digoxin Syp 30Ml Syp. , Diltiazem 2% W / W In Organogel Basegel , Diltiazem 25 Mg / 5Ml Vial Injection , Diltiazem 5Mg / 1Ml ( 5 Ml ) , Injection , Dimethyl Fumarate 240Mg. Tab. , Dinoprostone Gel 5%Gel , Diosmin 500Mg Tab. , Diphenhydramine + Ammonium Chloride + Sodium Citrate Cough Syrup 60Ml , Diphenhydramine 25Mg. Tab. , Diphenhydramine Syrup ( 12.5Mg / 5Ml ( 100 Ml Bottle ) ) , Syrup , Diphtheria Antitoxin 10000 Iu ( 10Ml Vial ) Inj. , Dispersible Zinc 20Mg Tab. , Disposablesteriledual Drape Sheath { 140*210Cms } Integrated With High Absorbent Capacity Fabric Sheath With Absorption Area 24*27 And C Shape Incision Window ( 6 ) , Self Adherent Adhesive, Iso / Ce Certified . , Disposable Amniotic Fluid Collection Spillage Free Sac. , Disposable Bilayered Leak Proof Sheet 23.5X35.4 With Absorbent Surface . , Disposable Breathing Circuit ( Ventilator Circuit ) Adultsize , Disposable Breathing Circuit ( Ventilator Circuit ) Paediatricsize , Disposable Closed System A.F.C. Pouch, Embossed Leak Proof, Eto Sterile. Ce Certified . , Disposable Electrosurgical Control Pencil , Disposable Endoscopic Cutting And Stapling Devices 45 Mm 45 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator , 22Mm Distal Jaw Opening And 8 Mm Proximal, Shaft Length Of 340Mm. , Disposable Endoscopic Cutting And Stapling Devices 60Mm 60 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator, 22Mm Distal Jaw Opening And 8 Mm Proximal, With Single Handed Articulation Shaft Length Of 280, 340Mm & 440 Mm. , Disposable Eye Shield Protectoragainst U / V Light For Infant And Neonates , Steriloized, Single Pack . , Disposable Gynaec Dressing Kit, Ce Certified . , Disposable High Absorbent Lscs Drape Sheath With Self Adherent Incisional Window , Disposable Hiv Pack, 1 Kit , Disposable Insuline Syringe . , Disposable Intraluminal Stapler 19 To 25 Mm Curved Circular Stapler 19 To 25 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses. It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 25 To 29 Mm Curved Circular Stapler 25 To 29 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses. It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 29 To 33 Mm Curved Circular Stapler 29 To 33 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 33 Mm Curved Circular Stapler 33 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Linear Cutter- 55Mm Linear Cutterof 55 Mm With Inbuilt Selectable Staple Height. , Disposable Linear Cutter- 75Mm Linear Cutterof 75 Mm With Inbuilt Selectable Staple Height. , Disposable Linear Cutter Reloads- 55Mmuniversal Black Reload Compatible With The 55Mm Linear Cutter With Inbuilt Selectable Staple Height. , Disposable Linear Cutter Reloads - 75Mmuniversal Black Reload Compatible With The 75Mm Linear Cutter With Inbuilt Selectable Staple Height. , Disposable Linear Stapler 30Mmlinear Stapler 30 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler 60 Mm Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler 90 Mmlinear Stapler 90 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 30 Mm Reload For Linear Stapler 30 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 60 Mm Reload Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 90 Mm Reload Linear Stapler 90 Mm Size With Controlled Tissue Compression. , Disposable Liner Cutter 55 Mm Disposable Liner Cutter 55Mm , Disposable Liner Cutter 75 Mm Disposable Liner Cutter 75 Mm , Disposable Multifire Cliip Applier Long Size-15 Clips , Disposable Multifire Cliip Applier Long Size-15 Clips , Disposable Multifire Clip Applier Small Size 20 Clip , Disposable Multifire Clip Applier Small Size 20 Clip , Disposable Needles , Disposable Needles - 18G. , Disposable Needles - 20G. , Disposable Needles - 22G. , Disposable Needles - 23G. , Disposable Needles - 26G. , Disposable Needles 14 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 16 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 18 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 21 Gneedle ( 11 / 2 Inch ) , Disposable Needles 24 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 26 Gneedle ( 1 Inch ) , Disposable Paper Gloves Size 7 Inches Consumable , Disposable Patient Body Cover With Six Holders, Weight Bearing Capacity > 100 Kgs. , Disposable Patient Body Cover With Six Holders, Weight Bearing Capacity > 125 Kgs. , Disposable Patient Wrap With An A.F. Drain Bag With Measuring Device For The Assessment Of Blood Loss. Iso / Ce Certified . , Disposable Pcnl Drapes Kit; Size: 150 X 275 Cms, Adhesive Area : 20 Cms X 25Cms , Disposable Plastic Aprons ( Specs As Per Pollution Control Board ) , Disposable Plastic Aprons ( Specs As Per Pollution Control Board ) , Above 40 Microns Sterile , Disposable Plastic Leggings , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 1.5Mm ) Endoscopic Cutting And Stapling Devices 45Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of1.5Mm And Open Staple Leg Length Of 3.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 1.8Mm ) Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 2.0Mm ) Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of2 Mm And Open Staple Leg Length Of 4.1 Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - 1Mm Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 1.5Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1.5Mm And Open Staple Leg Length Of 3.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 1.8Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 2.0Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of2 Mm And Open Staple Leg Length Of 4.1 Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - 1Mm Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Disposable Reloads For Reusable Linear Cutter-55 Knife Blade Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Disposable Reloads For Reusable Linear Cutter-55 No Knife Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Disposable Reloads For Reusable Linear Cutter-55 Reloads For Re-Usable Linear Cutter 55 Mm With Closed Staple Height Of 1.5 Mm & 2 Mm , Disposable Scalp Vein Set Size 20 No , Disposable Scalp Vein Set Size 22 No ( Each ) , Consumable , Disposable Spinal Needle 22 No , Disposable Spinal Needle 23 No , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized6 Inch / Pair , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized6.5 Inch / Pair, Consumable , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized 7 Inch / Pair , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized7 Inch / Pair , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized ( 7.5 Inch / Pair ) , Consumable , Disposable Suction Cather Size 12, . , Disposable Suction Catheter Assorted Covering All Sizes 10, 12, 14, 16, 18Consumable , Disposable Suction Catheter Size 14 . , Disposable Surgen Cap ( 100 Pcs Packet ) , Disposable Syringe ( For Vitamin K Inj ) ( 1Ml With Needle 26G ) , Consumable , Disposable Syringe With Needle - 10Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 20Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 2Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 3Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 50Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 5Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Three Layer Face Mask ( 100 Pcs Packet ) , Disposable Tuberculin Syringe. 1Ml , Dissecting Hook Having Shaft Diameter 3Cm & Shaft Length 4-9 Cm .Compatible With Gen 11 , Distal Embolic Protection Device , Dj Stent Removal Forceps, 4, 5 Fr, , Doc Extension145 / 165 Cm , Domperidone + Ranitidine 10Mg+150Mg Tab , Dormia Basket , Double J Stent; 3Fr, 18Cm, One End Open , Double J Stent; 4Fr, 18Cm, One End Open , Double J Stent; 5Fr, 22Cm, One End Open , Double Lumen Catheter Full Set With Rolleson Syringe. , Double Lumen Endobronchial Tubewith Ezee One Side Blockerno- 35, 37, 39, 40 ( Right Side ) , Double Lumen Endobronchial Tube With Ezee One Side Blocker No- 35, 37, 39, 40 ( Left Side ) , Double Lumen Hemo Dialysis Catheter Kit 15 Fr - 19Cm / 23Cm / 25Cm / 28Cm / 33Cm , Double Lumen Low Pressure Tracheal And Bronchial Cuffs Tubes For Minimising The Risk Of Mucosal Damage , Double Lumen Tube 33F , Double Lumen Tube 35F , Double Lumen Tube 37F , Double Lumen Tube 39F , Drain Under Water Seal Drainage System - 1000Ml , Dressing Tray , Dried Lvyleaf Extract 0.7Gm S - 100 Ml Syp. , Drill Bittool 15Ba30 Legend 15Cm 3Mm Ball , Drill Bittool 15Ba40 Legend 15Cm 4Mm Ba Compatible With Drill , Drill Bittool T15mg25 Legend 15Cm 2.5Mm Mh Compatible With Drill , Drill Bittool T15mh30d Legend 15Cm 3Mm Diam Compatible With Drill , Drill Bittool15ba20d Legend 15Cm 2Mm Ba Diam Compatible With Drill , Drill Bits Cutting 4 Mm, 6Mm, 8Mm For Asceulap Hand Drill , Drop Evion ( Standard Size ) , Drug Coated Balloon With 2 ?G / Mm2 Dose Of Paclitaxel With Polysorbate & Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time. Size- 035 With 120Cm Shaft: Diameter 4Mm -6Mm , Lengthupto 150Mm / 035 With 75Cm Shaft Diameter 5-12Mm Length 60Mm / 014 With Shaft 150Cm Diameter 1.5Mm -3Mm Length Upto 120Mm , Drugs Affecting Hr , Dry Laser Films 125Sh 10X12cm Dvb , Dual ( Parietal And Visceral Sides ) Composite Mesh Made Of Polyesterand Absorbable Collagen Film For Laparoscopic Hernia Repair Surgery With Size Of 15X15 Cm, Us Fda Approved , Dual Layer Hydrophilic Coating & Checker Flex Points For Unmatched Trackability With Innovative Reinforced Inner Lumen For Better Pushability. Size-Diameter :1.5 Mm To 5.0 Mm & Length: 20- 300 Mm , Dulcolaxsuppository 10 Mg Bisacodyl -16 Per Pack , Duraflex T Stent ( Tumorstent ) , Duraform / The Dural Graft Substitute Should Be Onlay With One Side Rough For Better Handling During Surgery, Should Be Of Absorbable Collagen Material. On Wetting In Saline, Should Not Shrink And Should Be Capable Of Being Used Sutureless. The Dural Graft Substitute Should Be Fda / Ce Approvedsize -3X3 . , Duraform / The Dural Graft Substitute Should Be Onlay With One Side Rough For Better Handling During Surgery, Should Be Of Absorbable Collagen Material. On Wetting In Saline, Should Not Shrink And Should Be Capable Of Being Used Sutureless. The Dural Graft Substitute Should Be Fda / Ce Approvedsize -4X 5 . , Durapore Surgical Tape Plaster 2.5Cm X9.1 Meter , Durasil Stent , Duropotch10x12 , Duropotch8x10 , Dusting Powder, 10 Gm ( Neomycin Sulphate 5 Mg, Baccitracin 250 Unit, Sulphacetamide Sodium 60 Mg ) , Dynaplast 15Cm X 4.5Meter , Dynaplast Plaster 10 Cmx 4.5 Meter , E Ptfe Stretch Re-In Forced Removable Ringed Thin Wall Vascular Graftsize: 6Mm / 8Mm Diameter X 50Cm / 70Cm / 80Cm Length , E Ptfe Stretch Re-In Forced Removable Ringed Thin Wallvascular Graft Size: 6Mm / 8Mm Diameter X 50Cm / 70Cm / 80Cm Length , E ) Maintains Fibronectin / Fibrinogen Ratio Within Physiologic Ranges , E.C.G.Roll Three Chanel . , E.C.G.Roll Two Chenal. , Each Pre-Filled Syringe Contains 44 Micrograms ( 12 Miu ) Of Interferon Beta-1A In 0.5 Ml Solution.Other Ingredients : Benzyl Alcohol, D-Mannitol, L-Methionine, Poloxamer 188 And 0.01 M Sodium Acetatebuffer Ph 4.2 , Easy To Carry Power Source To Attach 3 Silicon Ring Mounted Illumination Consumable.With Three Switch Assembly For Each Silicon Ring.Robust Design Rectangle 3Kg Medical Devices. , Eberconazole 10Mg + Methylparaben Ip 0.25% W / W Cream Of 10 Gm Tube , Eberconazole Nitrate Equivalent To Eberconazole - 1.0% W / W Mometasoe Furoate Ip 0.1% W / W In A Cream Base Preservative Methylparaben Ip 0.25% W / W Cream Of 10 Gm Cream , Eberconazole+Mometasoneointment , Ecg Cable 10 Lead , Ecg Electrodes As Perdrugs Act. , Ecg Electrodes With Offset Connector. Should Have Highly Conductive Wet Gel, Combination Of Instant And Long-Term Adhesives, Mri Compatible Breathable Micro Porous Material, Special Soft Sponge, Offset Connector Concept, High-Quality Ag / Agcl Sensor. Adultfda / Ce Approved Adult, , Ecg Electrodes With Offset Connector. Should Have Highly Conductive Wet Gel, Combination Of Instant And Long-Term Adhesives, Mri Compatible Breathable Micro Porous Material, Special Soft Sponge, Offset Connector Concept, High-Quality Ag / Agcl Sensor. Adultfda / Ce Approved Paediatric , Ecg Gel 250 Gm / Bottle 250 Gm , Ecg Paper Computerizesd Triple Channel 20M , Ecg Paper Roll 80Mm X 20Cm , Ecg Paper ( Chemical Coated ) 50Mm X 20Mm Roll. , Ecg Paper ( Wax Coated ) 50Mm X 30 Mtr, Roll. , Ecg Plastic And Silicone Ecg Clamp And Chest Electrodes , Echo Jelly 20Ml Bottle , Ecosprin 150Mgtablets , Edaravone 1.5Mg / Ml, 20Ml Amp.Inj. , Elastic Adeshiv Bandage10cm. X 4 / 6 M. , Elastic Knee Support With Hinges . , Electro Surgical Cautery Lead , Electrocorticography Connecting Cabie4 Contact , Electrocorticography Grid 4 X 5 Inch , Electrocorticography Grid I X 4 Inch , Electrosurgical Patient Plate , Elemental Calcium 150 Mgcap. , Elemental Calcium 225 Mg+Ibandronic Acid 150 Mg+Vitamin D3 800 Iu Tab. , Elemental Iron ( 50 Mg / 5 Ml 150 Ml Bottle ) , Syrup , Embolic Protection Device Carotid 3 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 3 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 - 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 4 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 4 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 5 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 5 Mm Affixed To A 0.014 Sta Inless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Ofsr.No 1 -10 Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 6 Mm With Variable Wire Distalembolicprotectiondevicewithnitinolmeshofsize6 Mm Affixed To A 0.014 Stainless Steel Guidewirecompatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 7 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 7 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Enalapril 1.25 Mg Inj. , Endo Applicator- Matt Finishing Stainless Steel Applier, With Us Fda Approved Sizes- A- 32.5Cmfor Ml / L / Xl, B- 45Cm For Ml / L / Xl , Endobronchial Blocker Arndt Endobronchial Blocker , Endobronchial Blocker Cohen Endobronchial Blocker , Endobronchial Blocker Ez-Blocker Endobronchial Blocker , Endobronchial Tubes: The Endobronchial Tube Made Of Highly Flexible And Thermoplastic Materials With Excellent I.O. To O.D. Ratio As Well As The Continuous X-Ray Markers And Special X-Ray Indicators In The Cuff Area. Available In Extensive Range Of Sizes Starting From Smallest Available I.E. 26Fr. The Complete Set Contains Tube With Suction Catheter, Angled Connectors, Y- Connectors. No Latex Contents. Usfda Approved , Endocryl , Endopath Basx Bladeless 12Mm Trocar, Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Seal, Integrated Universal Seal, 100Mm Length. , Endopath Basx Bladeless 5Mm Trocar, Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Seal, Integrated Universal Seal, 100Mm Length. , Endopyelotomy Stent , Endoscope Mask Forpainless Gastroscopy And Fiberoptic Bronchoscopy For Continuous Ventilation, Should Havebite Block, Should Have Sealing Valve For Sealability Of The Mask.Allow Fiberoptic Bronchoscopy Through Nasal Cavity When Upper Airway Obstruction Occurs, Size-3, 4, 5. , Endoscopic Disposable Medium Large Clip Applicator 5Mm 1. It Should Go Through A 5Mm Port. 2. It Should Have A 8.8Mm Closed Clip Length.And The Jaws Should Be 8.4Mm Length. 3.It Hould Have 15 Titanium Clips With Lateral And Transverse Groove. 4. It Should Have Secure Clip For Confident Ligation. 5. It Should Have Long Thin Angled Jaws Which Provides Outstanding Access And Visibility.And Have A Lind Of Demarcation 6. It Should Have A 33Cm Long Shaft For Additional Reach. 7. It Should Have A Antibackup Ratchet Mechanism Which Provides Control Over Placement Closure. 8.It Should Have A Low Clip Indicator And A Last Clip Lockout , Endoscopic Evl Bands .Multiband Barrel , Endoscopic Foreign Body Forceps - Rotatable , Endoscopic Guidwire . , Endoscopic Linear Cutter Cartridge Having 35Mm Staple Line, 30 Mm Cut Line, Having Closed Staple Height Of 1 Mm And 4 Rows Of Staple Line , Endoscopic Linear Cutter Catridge With Reload Surface Having Pocket Extensions, 6 Rows Of Staples With Asymetric Bent Tip And Option Of Closed Staple Height Of 1 Mm ( White ) , 1.5Mm ( Blue ) , 1.8Mm ( Gold ) , 2Mm ( Green ) , Endoscopic Multi Band Shooter , Endoscopic Sclerotherapy Needle Upper Gi Endoscopy , Endoscopic Sphincterotome , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Large Size Clips , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Medium Size Clips , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Medium / Large Size Clips , Endoscopy Biopsy Forceps , Endoscopy Sclerotherapy Needle Lower Gi Endoscopy 21 G & 23 G Each , Endotoxin Iv Bacterial Filter With 0.22 Um Polyether Sulphone Material And Can Prevent Air Embolism. . , Endotracheal Tube - Cuffedno 4.5 Mm Internal Diameter , Endotracheal Tube - Cuffedno. 4.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.5.0 Mm Internal Diameter , Endotracheal Tube - Cuffedno.5.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.6.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.6.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.7.0 Mm Internal Diameter , Endotracheal Tube - Cuffedno.7.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.8.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.8.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.9.0 Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 2.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 3.0 Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 3.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 4.0Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 4.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 5.0Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 5.5Mm Internal Diameter , Endotracheal Tube- The Endotracheal Tube Made Of Ruschelit™ Pvc Technology With Right Degree Of Stiffness I.E. Thermo Sensitive, Flexibility, And Kink Resistance. Comply With Astm Standard Requirements And Are Marked Withf29 Notation. Tubes Feature An Outstanding I.D. To O.D. Ratio. Available In A Full Range Of Paediatric And Adult Sizes Starting From 2.5Mm In Cuffed & 2Mm In Uncuffed. No Latex Contents. Usfda Approved , Endotracheal Tubes Size 7 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue , Endotracheal Tubes Size 8.5 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue , Entacapone , Enteral Feeding Devise-Should Have Both Feed And Flush Options With Mistic Technology, Should Be Able To Set Feed And Flush Rates Up To 24Hrs, And It Should Have Compatibility For Both Intermittent And Bolus Feed, Should Be Compact And Easy To Use, Feeding Bags Should Of 1000M, Feeding Bags Should Be Dehp Free, , Envoyguiding Catheter6 Fr. , Ephedrine 10Ml 0.75%, 10 Ml Nasal Drop , Epidural Anesthesia Kit- 16G. Catheter, Filter, Tuohy Needle, Lor Syringeswith Fixationspad. . , Epidural Anesthesia Kit- 18G.Catheter, Filter, Tuohy Needle, Lor Syringes Withfixationspad. . , Epidural Needle ( Tuohy Needle Of 80Mm Length And 10Mm Graduations With Internal Stylet And Optional Snap On Wings ) . , Epinephrine Hydrochiloride . 1Mg / Ml Inj. , Ercp Accerssories ( Bloon / Sphinterotome ) . , Erythromycin 0.02 Ointment , Erythromycin 250Mg. Tab. , Erythromycin 30Ml ( 100 Mg. / 5 Ml. ) Syp. , Erythromycin 500Mg. Tab. , Erythropoietin10000 Units / Ml Inj. , Erythropoietin2000 Units / Ml Inj. , Erythropoietin3000 Units / Ml Inj. , Erythropoietin4000 Units / Ml Inj. , Esophageal Stent . , Esophageal Stent 20 Mm, Length 10Cm , Esophageal Stent 20 Mm, Length 12Cm , Est Needle 21G . , Est Needle 23G . , Esterified Fatty Acid Complex Gel , Ethanol 85% With Emoilients 475 Ml Solution , Ethiodized Oil Injection , Ethyl Glycerin Ear Drops 1 Eye Drop , Etiophylline ( 77 Mg ) + Theophylline ( 23 Mg ) Tab. , Etiophylline + Theophylline Pead ( 46.5+14Mg / 5Ml ) 100Ml Syp. , Etodolac 400 Mg+Paracetamol 325 Mg Tab. , Etodolac 400 Mg+Paracetamol 500 Mg Tab. , Etodolac 400 Mg+Thiocolchicoside 4 Mg Tab. , Etodolac 400 Mg+Thiocolchicoside 8 Mg Tab. , Etodolac 400Mg+Paracetamol 500Mg+Serratiopeptidase 15 Mg Tab. , Etophylline 231Mg. + Theophyllin 69Mg.Sr 300 Mg Tab. , Etoposide 50Mgcapsule , Etoricoxib 120Mg Tab. , Etoricoxib 60 Mg+Thiocolchicoside 4 Mg Tab. , Etoricoxib 60 Mg+Thiocolchicoside 8 Mg Tab. , Etoricoxib 60Mg Tab. , Euphorbia Prostrate 10 Mg +Lidocaine 30 Mg Cream Basecream , Evd Catheters / The External Ventricular Drainage Catheter Should Be Impregnated With Rifampicin And Clindamycin. The Catheters Should Be Soft, Flexible. The Catheters Should Have 20 Large Holes 0.46Mm Dia And 20 Small Holes 0.23Mm Diaandtotal Drainage Area Of 4.15Mm Square To Facilitate Drainage Of Csf, Blood & Proteins. The Catheter Should Have Tantalum Tip And Depth Makers For X-Ray Visualization.It Should Be Fda / Ce Approved . , Evd- Venticular External Drainage System Contains One Bag. One 30Cm. Ventricular Catheter With Stylet Connecter, Trocar, Catheter Anchoring Collar And Connecting Tube. . , Evoh ( Ethylene Vinyl Alcohol ) Copolymer Dissolved In Dmso ( Dimethyl Sulfoxide ) , And Suspended Micronized Tantalum Powder , Expandable Anaesthesia Circuits With Maximum Lenghth Of 1.8 Meter. +1 Pc X Y-Piece Connector +1 Pc X Swivel Elbow With Leur Port And Cap +2 Pc End Connector , 22F Adult , Expandable Anaesthesia Circuits With Maximum Lenghth Of 1.8 Meter. +1 Pc X Y-Piece Connector +1 Pc X Swivel Elbow With Leur Port And Cap +2 Pc End Connector , 22F Paediatric , Extension Line With Male Luer Lock And3-Way Stop Cock . , Extension Line With Two Female Luer Lock Length- 15Cm , Extention For Breathing Circuit ( Catheter Mount ) 15Cm , Externalpigtaildrainagecatheter8 F And 9Fand 45 Cm , External Ventricular Drainage System , External Ventricular Drainage System , Extra Large Acetyl Polymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Extranal Diameter 34Mm, 3Rows, Closed Stapel Hight 0.75Mm, Houshing Capacity 14Cc. , Extranal Diameter 36Mm, 3Rows, Closed Stapel Hight 0.75Mm, Houshing Capacity 14Cc. , Eye Drape With Drain Pouch Size - 100X75cm Adhesive 7X9 Cm. . , Eye Dress With Eye Pad . , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 3Mm Diamond Burr , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 4Mm Cutting Burr , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 4Mm Diamond Burr , F2 / 8Ta23 Dissecting Tool Midas Rex. Drill 2Mm Cutting Burr , F2 / 8Ta23 Dissecting Tool Midas Rex. Drill 2Mm Diamond Burr , Face Shield For Covid 19 As Per Who Guidelines , Facial Dilators Set, Teflon Make ( For Pcn ) Each Pack Consisting Of Dailator Size 6, 8, 10, 12, 14, 16Fr - 1 Each , Fallopiantuberecanalizationset. , Faramycetine 20 Gmointment , Faramycetine 250Gointment , Faropenem 300Mg.Tabtab. , Fax Paper Roll . , Feeding Tube 10. , Feeding Tube 6, . , Feeding Tube 7, . , Feeding Tube 8, . , Feeding Tube 9, . , Femoral Cathetor Double Lumen Kit Curved , Femoral Puncture Needle 18G , Femoral Sheath 10Fx11cm , Femoral Sheath 5F , Femoral Sheath 5F , Femoral Sheath 5Fx11cm , Femoral Sheath 6Fx11cm , Femoral Sheath 7Fx11cm , Femoral Sheath 8F , Femoral Sheath 8F , Femoral Sheath 8Fx11cm , Femoral Sheath 9Fx11cm , Fentanyl 100 Microgran ( 2 Ml ) Inj. , Feracrylum 1% ( 100Ml ) Solution Solution , Feracryylum 1% Sterile Solution 100Ml Solution , Ferocrylion 1%Solution , Ferrous Ascorbate Equivalent To Elemental Iron 100 Mg + Folic Acid 1.1 Mg Tab. , Fibrin Sealantlyo 2Ml Kit , Fibrin Sealant Lyo 4Ml Kit , Fielderxtr , Fielder Fc , Fielder Xt , Filgrastim 300 Mcg ( Prefilled Syrings ) , Vial , Film Corner Cutter , Film Cutter , Film Cutters Big Size , Filter Paper Sheet ( ( Whatmann No 01 ) Sheets ) , Consumable , Filtrate Bag 10 L ( Drainage Bag 10 L ) Compatible With Multifiltrate Machine , Fixerpowder 22.5Ltrs. , Flatus Tube All Size , Flexometallictube Internal Diameter ( 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5 ) Mm , Flow Diverterflow Diverter:Fully Re-Sheathable, 48 Wire Braded Made Up Of Cobalt Cromium & Platinium Tungusten Alloy With Shoft Distal And Angled Tip, Fda Approved. , Flucinalone .025 + Neomycin.5% 20Gm. Ointment , Fluconazoleffs Bottle 100Ml Iv. , Fluconazole Eye Drop 3 Mg / Ml ( 10 Ml Vial ) Eye Drop , Fluconazole Ip, 0.5% W / W 15Gmointment , Fluency Self Expandable Stent Graft Self Expanding Nitinol Stent Encapsulated Between Two Ultrathin Layers Of Eptfe Grafts ( Both Luminal And External Surface Covered By Graft ) . Flared Ends To Ensure Proper Wall Apposition. Carbon Coated Luminal Surface To Reduce Early Stage Platelet Adhesion. Stent Graft Mounted On Multifunctional Tip-Less Braided Catheters With Stent Loc Mechanism.Diameter : 5Mm To 13.5 Mm Lengths: 20Mm, 30Mm, 40Mm, 60Mm, 80 Mm, 100Mm, 120M , Flumazenil 0.1 Mg / Ml5 Ml Multiple Dose Vial , Fluorescein Sodium Opthalmic Strips , Fluorscein Sodium 20% 3 Ml For Iv Use ( Inj. ) , Fluoxetine 10Mg Tab. , Flupenthixol 20 Mg / Ml. Inj. , Fluphenazine Deconate 25 Mg. Inj. , Flurbiprofen + Hpmc Ophthalmic Solution Eye Drops1 Eye Drop , Fluroscin Sodium Injection 10%Inj. , Fluticasonerespules0.5 Mg / 2 Mlinhaler , Fluticasone 0.05 % 10Gmcream , Fluticasone 0.05 % 20Gmointment , Fluvoxamine-100Mg Tab , Foamlite Dressings Transleucent Foam Dressings With Protective Barrier Against Water, Bacteria And Viruses, Water Proof Orshower Proof With Perforated With Gentle, Skin-Friendly Silicone Adhesive, Easy To Apply & Re-Position Designed To Absorb Low Exudate Levels And Helping Maintain A Moist Wound Healingenvironment Size 5X5 Cm , Fogarty Arterial Emblectomy Catheterfor Arterial Embolectomy Procedure, Usable Length 60-80 Cm. Sizes 3Fr, 4Fr, 5Fr, 6Fr, 7Fr , Foleys Urinary Bloon Catheter 3 Way Size 10. , Foleys Urinary Bloon Catheter 3 Way Size 12. , Foleys Urinary Bloon Catheter 3 Way Size 14 . , Foleys Urinary Bloon Catheter 3 Way Size 16 . , Foleys Urinary Bloon Catheter 3 Way Size 8. , Foleys Urinary Catheter Size8 - 2 Way. , Foleys Urinary Catheter Size 10 - 2 Way. , Foleys Urinary Catheter Size 12 - 2 Way. , Foleys Urinary Catheter Size 14 - 2 Way. , Foleys Urinary Catheter Size 16 - 2 Way. , Foleys Urinary Catheter Size 18 - 2 Way. , Folic Acid Tab ( 400 Mcg ) , Tablet , Fondaparinox 10 Mg / 0.8 Ml 1 Unitinj. , Formaldehyde ( Formalin ) 37% Acq Dilute 34 Ml Formaledehyde Solution With Water To Produce 100Ml ( 450 Ml Bottle ) , Formalin Tab. Bottle Of 100 Tab. , Formaline 450Ml Solution , Framycetin Drops 5Ml Eye Drop , Framycetin Sulfate 100Gm. Cream , Fully Automatic Disposable Biopsy Gun Should Have Penetration Depth 18 Mm, And Angle Sample Notch And Two Firing Bottom Option, With Color Coding For Easy Detection Of Gauzeall Size , Fully Automatic Disposable Biopsy Gun Should Have Penetration Depth 22Mm, And Angle Sample Notch And Single Firing Bottom Option, With Color Coding For Easy Detection Of Gauzeall Size , Furesemide 30Ml Syp. , Furosemide 20Mg. Tab , Furosemide 40Mg. Tab. , Fusidic Acid Ip 2% Betametasone Valerate Ipeq. To Betametasone--0.10% Preservative Chlorocresol Ip 0.12% 10Gmointment , G - Plast Non Woven Tape , G Lions For G8 Navigationndi Passive Sphere , G.V.Paint 500 Ml. Liquid , Gabapentin 300Mg Tablets , Gabapentin / Nortryptaline 300 + 10Mg Tablets , Gabapentine ( 100 Mg ) , Tablet , Gaia Wire 1 , Gaia Wire 2 , Ganciclovir 1.5 Mgointment , Gas Gangrene Antitoxin 10000 Iu / Ml 40000 Iuinj. , Gatifloxacin 100Ml Inj. , Gel Arm Rest , Gelofuscin 500 Ml Iv , Gentamycin + Betamethasone Eye / Ear Drop 3% 10Mleye Drop , Gentamycin Ear Drops + Hydrocortisone Ear Drops10mleye Drop , Gentamycine Cream , Gigli Saw Wire . , Glibenclamide Sr 5Mg Tab. , Glide Sheath Slender Terumo 7F , Glider Torque Device , Glucose In Glycerine Drop 25% 15Ml / Vial 1 Eye Drop , Glue ( N - Butyl Cyanoacrylate ) , Glycerine + Magnesium Sulphate Crystal250ml Jar , Glycerine Ip Solution ( 100Ml Bottle ) , Bottle , Glyceryl Cocoate, Cocoamidopropyl Betain, Glycerine, Disodium Laurth Sulfosuccinate , Sodium Citrate With Normal Ph Of 5.5 Offering Log 3 Reduction Virucidal And Bactericidal Hand Disinfection Products ( Hand Lotion ) 500 Mlbot. Liquid , Glyceryl Trinitrate 5Mg / Ml10ml Vial ( Nitroglycerine ) Inj. , Graft Master ( Covered Stent ) Complete Sizes Sequence1 Sets , Guide Catheter For Neurointervention 0.088 Id Full Length Stainless Steel Braid Reinforced Proximal Support Zone Transitioning To 4 Cm Distal Flexible Zone With Large .088 Inner Lumen Distal Shaft Hydrophilic Coating For Optimal Trackability 80 Cm Cm Lengths With Straight Tip Shape Should Be Dgci And Usfda Approved , Guide Catheter For Neurointervention 0.088’’ Idfull Length Stainless Steel Braid Reinforced Proximal Support Zone Transitioning To 4 Cm Distal Flexible Zone With Large .088 Inner Lumen Distal Shaft Hydrophilic Coating For Optimal Trackability 80 Cm Cm Lengths With Straight Tip Shape Should Be Dgci And Usfda Approved , Guide Liner V3 6F , Guide Wire - Teflon Coated - 0. 032 X 150 Cm J , Guide Wire - Teflon Coated - 0. 035 X 150 Cm J , Guide Wire - Teflon Coated - 0. 035 X 260 Cm J , Guide Wire ( Staight ) 0.035 Inch , Guide Wire 0.035 ( 0.89 Mm ) Hydrophilic Tip At Both End , Guide Wire 0.35 No . , Guide Wire 0.38 No . , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip, 0.014, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Compatable With Item Of Sr. No 3, 4, 52.Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip, 0.014, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 300 Cm Length High Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014, 300 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Should Be Compatable With Item Of Sr. No 3, 4 And S2. Used For Neurovascularpurpose Should Be Dcgi And Usa-Da Approved. , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 300Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014, 300 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascularpurpose Should Be Dcgi And Usfda Approved. , Guide Wire For Microcatheter For Avm Management Size 0.008 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.008, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Guide Wire Hydrophyliccoated Floppy Tip Straight; 0.018 , Guide Wire Hydrophyliccoated Floppy Tip Straight; 150Cm-0.025 , Guide Wire Hydrophyliccoated Floppy Tip Straight; 150Cm-0.035 , Guide Wire Hydrophylic Coated J-Tipped; 150Cm-0.035 , Guide Wire Ptfe, Straight Tip; 150Cm-0.025 , Guide Wire Ptfe, Straight Tip; 150Cm-0.035 , Guide Wire, Zebra, Straight Tip; 150Cm-0.035 , Guidewire 0.035, 150 Cms 0.035 , Hydrophilic Guidewire 150 Cms Length , Guidewire 0.035, 150 Cms0.035 , Hydrophilic Guidewire 150 Cms Length , Guiding Catheter 6F Jl Sh 3.0 , Guiding Catheter 6F Jl Sh 3.5 , Guiding Catheter 6F Jl Sh 4.0 , Guiding Catheter 6F Rdc , Guiding Catheter 7F Jl 3.0 , Guiding Catheter For Neurointervention 5F Neurovascular Guiding Catheter 5F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 6F Neurovascular Guiding Catheter 6F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 6F6 Fr Intracranial Support Catheterwith 0.072 Id, Upto 130 Cm Long With Flat Pitch Nitinol Braiding , Guiding Catheter For Neurointervention 7F Neurovascular Guiding Catheter 7F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 8F Neurovascular Guiding Catheter 8F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointerventiondistal Access Catheter: 5 Fr Intracranial Support Catheterwith 0.058 Id, Upto 130 Cm Long With Flat Pitch Nitinol Braiding , Guiding Catheters 6F 3D Rc , Guiding Catheters 6F Al 0.75 , Guiding Catheters 6F Al 1.0 , Guiding Catheters 6F Al 2.0 , Guiding Catheters 6F Ar 1.0 , Guiding Catheters 6F Ar 2.0 , Guiding Catheters 6F Ebu 3.0 , Guiding Catheters 6F Ebu 3.5 , Guiding Catheters 6F Ebu 4.0 , Guiding Catheters 6F Hockey Stick , Guiding Catheters 6F Jl 3.0 , Guiding Catheters 6F Jl 3.5 , Guiding Catheters 6F Jl 4.0 , Guiding Catheters 6F Jl 4.5 , Guiding Catheters 6F Jr Sh 3.0 , Guiding Catheters 6F Jr Sh 3.5 , Guiding Catheters 6F Jr Sh 4.0 , Guiding Catheters 6F M Radial , Guiding Catheters 6F Mpa 1.0 , Guiding Catheters 6F Mpa 2.0 , Guiding Catheters 6F Mpa 3.0 , Guiding Catheters 6F Rrd , Guiding Catheters 6F Xb 3.0 , Guiding Catheters 6F Xb 3.5 , Guiding Catheters 6F Xb 4.0 , Guiding Catheters 6F Xb Lad 3.0 , Guiding Catheters 6F Xb Lad 3.0 , Guiding Catheters 6F Xb Lad 3.5 , Guiding Catheters 6F Xb Lad 4.0 , Guiding Catheters 6F Xb Rc 3.5 , Guiding Catheters 7F 3D Rc , Guiding Catheters 7F Al 0.75 , Guiding Catheters 7F Al 1.0 , Guiding Catheters 7F Al 2.0 , Guiding Catheters 7F Ar 1.0 , Guiding Catheters 7F Ar 2.0 , Guiding Catheters 7F Ebu 3.0 , Guiding Catheters 7F Ebu 3.5 , Guiding Catheters 7F Ebu 4.0 , Guiding Catheters 7F Hockey Stick , Guiding Catheters 7F Jl 3.5 , Guiding Catheters 7F Jl 4.0 , Guiding Catheters 7F Jl 4.5 , Guiding Catheters 7F Jr 3.5 , Guiding Catheters 7F Jr 4.0 , Guiding Catheters 7F Jr Sh 3.0 , Guiding Catheters 7F Jr Sh 3.5 , Guiding Catheters 7F Jr Sh 4.0 , Guiding Catheters 7F M Radial , Guiding Catheters 7F Mpa 1.0 , Guiding Catheters 7F Mpa 2.0 , Guiding Catheters 7F Mpa 3.0 , Guiding Catheters 7F Rdc , Guiding Catheters 7F Xb 3.0 , Guiding Catheters 7F Xb 3.5 , Guiding Catheters 7F Xb 4.0 , Guiding Catheters 7F Xb Lad 3.0 , Guiding Catheters 7F Xb Lad 3.5 , Guiding Catheters 7F Xb Lad 3.5 , Guiding Catheters 7F Xb Lad 4.0 , Guiding Catheters 7F Xb Rc 3.5 , Guiding Catheters 7F Xb Sh 3.0 , Guiding Catheters 7F Xb Sh 3.5 , Guiding Catheters 7F Xb Sh 4.0 , Guiding Sheath , Guioe Wire For Microcatheter For Avm Management Size 0.008 Inch 200Cm Length High Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.008, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Compatabie With Item Of Sr. No 1, 2 And 3. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Gynae Belt . , H 1, 2, 3 Catheter5 F , H1 Catheter4 F , H1n1 Vaccine ( Swaine Flu Vaccine ) , Haemophilous Influenze B ( Hib ) Vaccine , Haemostasis Dressing , Halometasone 0.05%Ointment , Halometasone 0.05% Andfusidic Acid 2% W / Wointment , Halometasone Monohydrate 0.05% W / W + Fusidic Acid Ip 2.00% W / W + Propylparaben Ip 0.015% W / W Cream Of 10 Gm Tube , Halometasone Monohydrate 0.05% W / W, + Cholorocresol Ip 0.1 % W / W Cream Of 10Gm Tube , Haloperidol5mg / Ml ( 1 Ml Amp ) Inj. , Haloperidolnasal Drops , Haloperidol ( Long Acting ) Deconate 50 Mg. Inj. , Halothane 250Ml , Hand Activated Blade With Flat Tip For Spot Coagulation Sharp Edges For Cutting, Blunt Convex Surface For Broadest Area Of Coagulation And Concave Surface For Sealing Vessels, Compatible With Gen11 , Hand Activated Dissecting Hook Blunt Outer Radius For Captive Coagulating, 60-Degree Sharp Inner Radius For Cutting, Compatible With Gen11 , Hand Pressure Gauge For Intra Cuff Pressure Monitoring , Handpiece ( Blue ) Compatible With Gen 11 , Handpiece ( Transducer ) Compatible With Gen 11 , Hanger Channel Type 10 X 12 , Hanger Channel Type 12 X 12 , Hanger Channel Type 12 X 15 , Hanger Channel Type 12 X 6 , Hanger Channel Type 14 X 14 , Hanger Channel Type 14 X 17 , Hanger Channel Type 15 X 6 , Hanger Channel Type 6½ X 8½ , Hanger Channel Type 8 X 10 , Hanger Clip 10 X 12 , Hanger Clip 12 X 12 , Hanger Clip 12 X 15 , Hanger Clip 12 X 6 , Hanger Clip 14 X 14 , Hanger Clip 15 X 6 , Hanger Clip 6½ X 8½ , Hanger Clip 8 X 10 , Hcg5000 Iu 1Ml / Amp Unit Inj. , Hcg 2500 Iu 1Ml / Amp Unit Inj. , Heart Positioner For Beating Heartshould Be A Low Profile Positioner For Apex And Off Apex Position And To Lift The Heart. , Heart Positioner For Beating Heart Should Be A Low Profile Positioner For Apex And Off Apex Position And To Lift The Heart. , Heart Rail Ii Terumo , Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients , Hem - O - Lock Polymerclip, Usfda Approved , Hemmorhoidal Circular Staple Hemmorhoidal Circular Stapler 33Mm With Controlled Tissue Compression For Variable Tissue Thickness, Leg Length Of 4Mm. , Hemodaylasis - Blood Tubbing Full Set ( Ce Certified ) . , Hemodaylasis - Post Pum. , Hemodialysis Fluid For Bicarb Made ( Part A 10 Ltr +Part B 500Gm 2 / Pkt ) Solution , Hemodialysis Fluid For Bicarb Made ( Part A 10 Ltr +Part B 500Gm 2 / Pkt ) , Consumable , Hemodilaysis Catheter8f , Hemorrhoidal ( 33Mm ) Circular Stapler ( With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm - 1.5 Mm, Staple Open Leg Length Of 5.5 Mm ) , Hemostatic Gelatin Thrombin Matrix 10 Ml Kit , Hepatitis A Vaccine - Administered By Ection Into The Muscle Of The Upper Arm. Two Separate Shots Of 0.5 Ml For Children Inj. , Hepatitis A Vaccine - Administered By Ection Into The Muscle Of The Upper Arm. Two Separate Shots Of 1Ml For Adults Inj. , Hernia Kit Containingpolypropylene Mesh 7.6Cm X 15Cm Polypropylene Suture Size 2-O, 90Cm , 30Mm ½ Circle Rb Needlepolyglactin910 , Triclosan Coated Usfda Approved Suture Size 2-O, 70Cm, 30Mm ½ Circle Rb Needle , Hernia Kit Containing Polypropylene Mesh 6Cm X 11Cm Polypropylene Suture Size 2-O, 90Cm , 30Mm ½ Circle Rb Needlepolyglactin910 , Triclosan Coated Usfda Approved Suture Size 2-O, 70Cm, 30Mm ½ Circle Rb Needle , Hf-Female Spike Adapter Compatible With Multifiltrate Machine , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma Silicon Elastomer Coated- 2 Way , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma. Silicon Elastomer Coated - 3 Way , High Flow Triple Lumen Polyurethanecatheter Tray.Fr-7, G-16X16x18, L-15 / 16Cm. With Guide Wire, Triple Lumen Catheter, Puncture Needle, Short Iv Canula, Rollerson Syringe, Dilator, Scalpel, 3 Injection Cap, Drape.. , High Pressure Line , High Speed Screen 10X12 X-Ray , High Speed Screen 6.5X8.5 X-Ray , High Speed Screen 8X10 X-Ray , High Torque Bmwpreformedj 190Cm , High Torque Bmw 0.014X 260Cm , High-Volume, Low-Pressure Cuff Preformed Oral And Nasal Rae Tubes For Reducing The Risk Of Kinking And Also To Allow Unobstructed Access For Surgical Procedures At Head And Neck , Hiv Disposable Preventive Kit ( For Surgeon ) , Homatropine Hydrobromide 2 %W / V 5Ml Eye Drop , Hormonal Intrauterine System Hius - B Erinna , Hubsite Huber Bebel Needle ( G-20, G-22, Length-22, 25Cm ) With Wings And Flexible Polyurethane Extension Tube ( L-30Cm ) . , Human Anti-D Immunoglobulin 300 Mcg , Human Hepatitis B Immunoglobulin ( 100Iu ) / 1Ml Injection , Human Mixtard 40Iu 10Ml Inj , Human Normal Immuneglobulin ( I.P. / E.P. ) 5Gm. / 100Ml Inj. , Humbeysknife Disposable Blade . , Humidifier { Hme Filter } Adultsize , Humidifier { Hme Filter } Paediatricssize , Hyaluronidase ( 1500Iu ) Amp. Injection , Hydralazine Hydrochloride 20Mg / Ml ( 1 Ml Amp / Vial ) Inj. , Hydrazaline 1 Lac Iu Inj. , Hydro Twister Guide Wire , Hydro Wire , Hydrocephalus Shunt System Complete Set Regular Size Vp Lp With Bacterial Resistant Tubing . , Hydrocephalus Shunt System Complete Set Regular Size Vp Mp With Bacterial Resistant Tubing . , Hydrocolloid Dressings Self Adherent Moist Wound Dressing Made Up Of Triple Hydrocolloid Matrix With Elastomeric Polymer Forpressure Ulcers / Dry Woundssize, 7.5X7.5 Cm, Oval, 15X15cm, 10X10cm , Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified. , Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified. , Hydrogel Barrier Based On Sepra Technology Swells Once In Contact With Moisture To Minimize Tissue Attachment , Hydromorphone 1Mg Tablets , Hydromorphone 2Mg Tablets , Hydrophilic Coated .032”, .035” X 150 Cm Angled & Straighttip Guide Wire With Glider Torque Device , Hydrophilic Guide Wire ( Terumo ) , Straight Tip, 150Cm, 0.035 Diameter , Hydroquinone 2 %W / W + Mometasone Furoate 0.1 %W / W + Tretinoin 0.025 %W / Wcream , Hydroquinone 2% + Oxybenzone 2.5% +Octinoxate 9% ( Melalite 15% ) 0.04 Ointment , Hydroquinone Usp..2.0% W / W Tretinoin Usp .0.025 % W / W Mometasone Furoate Usp ..0.1 % W / W 20Gmointment , Hydroxy Chloroquin 200 Mg Tablets , Hydroxy Chloroquin 400 Mg Tablets , Hydroxy Propyl Methyl Cellulose ( Hpmc ) 2 %W / W-Pfs With Cannula Injection , Hydroxypropyl Methylcellulose Opthalmic Solution ( Hpmc ) 2 %W / W , 5Gm. Gel ( Pfs Syringe ) , Hyoscine Butylbromide 10Mg. Tab. , Hyoscine Butyldromide 20Mg. / 1Ml Amp. For Im / Iv Use Injection , Hypoallergenicporous Adhesive 10Cm. X 2M. , Hypodermic Needles For Single Use -Gauze 23 Bis Length, 25 +1 / -2 , Hystocryl , I P Needle ( With Echogenic Tip ) , Ibandronic Acid 150 Mg Tab. , Ibandronic Acid 50 Mg Tab. , Ibuprofen - 400Mg Tab. , Ibuprofen 400 + Paracetamol 500Mg. Tab. , Ibuprofen Syrup 100Mg / 5Ml ( 60 Ml Bottle ) Syp. , Icp Monitor Patient Transducer Kit Compatible With Codeman Monitor , I-Gel Size-3 , I-Gel Size - 4 , I-Gel Size - 5 , Image Intensitycover , Impregnated Vascular Hemostatic Pec Porous Sponge For Control Of Traumatic Arterial & Venous Bleeding. Effective On Patient On Anticoagulants. Size 5Cmx 5Cm , Impregnated Vascular Hemostatic Pec Porous Sponge For Control Of Traumatic Arterial & Venous Bleeding. Effective On Patient On Anticoagulants. Size 7Cmx 7Cm , Impression Compound. , Incentive Spirometer 3 Balls With 3 Different Chambers , Indocyanine Greeninjection10ml , Indomethacin 1% 5Ml Eye Drop , Indomethacin 25Mg Cap. , Infaltion Device With Survival Kit , Infant Feeding Tube ( Catheter ) All Size . , Inflation Device , Inflation Device Gun Type , Influenza Vaccine 0.5 Ml Vaccine , Infusion Line With Three Way Extension Port And Closed Iv Connection Device . , Infusion Line With Two Way Extension Port And Closed Iv Connection Device. , Injection Protamine50mg. / Per 5Ml , Injection Tirofiban , Instillaion Mapc Tube , Instillaion Therapy Dressing Made Of Black Polyurethane Ester Spiral Cut Sheet Pore Size 400 To 600 Micronsize 12.5 X18 X3.3Cm , Instillaion Therapy Dressing Made Of Black Polyurethane Ester Spiral Cut Sheet Pore Size 400 To 600 Micron, Size 7.5X10 X3.3Cm , Instillation Therapy Largepu Foam. Pore Size 400-600 Micron , Insulin Glargine 100Iu - 10Ml Vialinj. , Insulin Pen Needle 32G ( 4Mm ) Packing 100 Units. , Insulin Syringe ( 1Ml With 31 G Needle ) , Intensifying Screen ( Blue Sensitivity ) 10 X 12 , Intensifying Screen ( Blue Sensitivity ) 12 X 12 , Intensifying Screen ( Blue Sensitivity ) 12 X 15 , Intensifying Screen ( Blue Sensitivity ) 12 X 6 , Intensifying Screen ( Blue Sensitivity ) 14 X 14 , Intensifying Screen ( Blue Sensitivity ) 14 X 17 , Intensifying Screen ( Blue Sensitivity ) 15 X 6 , Intensifying Screen ( Blue Sensitivity ) 6½ X 8½ , Intensifying Screen ( Blue Sensitivity ) 8 X 10 , Intercostal Drainage Bag All Size , Interferon Beta-1A 30Mcginj. , Intermittent Electric Pneumatic Leg Compression Device With Pump Per Pair , Internal - External Biliary Drinage Catheter , Internal Externalbiliarydrainagecatheter 8 F And 10F , Internal External Biliary Drinage Catheter Set , Intra Cameral Epitrate Inj. , Intra Cameral Pilocarpineinj. , Intra Cameral Xylocaine Inj. , Intracath 16G. , Intracranial Stent16 Wire Nitinol Braiding With Sliding Cell Technology Like Leo+. Two Radio-Opaque Helicoidal Markers Which Run On Entire Body Of Stent.Flared Ends For Better Wall Apposition In Tight Curves.Compatible With Vasco 21 / 25 / 28, Included Inside Stent Packing. Re-Sheathable Upto 90%, Available In Diameter Of 3.5 / 4.5 / 5.5 Mm Sizes With Various Lengths Like 18Mm To 75Mm. , Intracranial Stentlow Profile 16 Wire Nitinol Braiding With Sliding Cell Technology Like Leo+ Baby. Two Radio-Opaque Helicoidal Markers Which Run On Entire Body Of Stent.Flared Ends For Better Wall Apposition In Tight Curves.Compatible With Vasco 10 ( 0.017 ) , Eclipse 2L. Re-Sheathable Upto 90, Available In Diameter Of 2.0 / 2.5 / 3.0 Mm Sizes With Various Lengths Like 12Mm To 35Mm. , Intrauterine Access Balloon Catheter9f , Intravenous Set With Airway And Needle ( Adult ) As Per Drugs Act. Specification , Intravenous Set With Airway And Needle ( Pediatrics ) As Per Drugs Act. Specification , Intravesical Bcg Vaccine ( Oncovac ) ; 40Mg / Vial , Introducer Needle 18G X 7Cm , Introducer Needle 20G X 4Cm , Introducer Needle 21G X 4Cm , Introducer Sheath 5F Femoral , Introducer Sheath 6F Femoral , Introducer Sheath 7F Femoral , Intubating Lma ( Ilma ) Size ( 3, 4, 5 ) Size ( 3, 4, 5 ) , Intubating Stylets , Iodinated Non Ionic Contrast Iohexol 100Ml ( Omnipaque ) 350 , Iodoform 500 Gm Powder , Ionic Contrast Media 60% 20 Ml.Inj. , Ionic Contrast Media 60% 50 Ml.Inj. , Ionic Contrast Media 76% 50 Mlinj. , Ipratropium Bromide 40 Mcg + Solbutamol200 Mcginhaler , Irinotecan 100 Mg Inj ( 1 Ml Amp ) , Iron + Folic Acid 300Mg+ 0.5Mg Cap. , Iron 2Ml Inj. , Iron And Folic Acid Enteric Coated . Ferrous Sulphate Ip To Ferrous Iron 100 Mg And Folic Acid Ip 0.5 Mg Granulestab , Iron And Folic Acid Enteric Coated . Ferrous Sulphate Ip To Ferrous Iron 100 Mg And Folic Acid Ip 0.5 Mg Granules Tab. , Iron And Folic Acid Enteric Coated Tab Dried Ferrous Sulphate Equ. To Ferrous Iron 100 Mg And Folic Acid 0.5 Mg ( Blue Tablet ) , Iron Dextran50 Mg El Iron / Ml Inj. , Iron Drop15ml Eye Drop , Iron Sorbitolinj. , Isoflavones 60 Mg. In Control Release Form Cap , Isoflavones 60 Mg. In Control Release Form Cap. , Isophane Insulinip, Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Suspension Contains 40 Iu ( 10Ml Vial ) Inj. , Isoprenaline 2 Mg / Ml Inj. , Isoprenaline 2Mg / Ml Ampoule Injection , Isopropyl Alcohol Ip 55.0% W / W, Purified Water Ip 10.0% W / W, Propellant Hydrocarbon 35.0% W / Waerosol Spray 200Gm . Spray , Isosorbide Dinitrate ( 10Mg ) Tab. , Isosorbide Dinitrate ( 5Mg ) Tab. , Isosorbide Dinitrate Ip - 5Mg Tab. , Itraconazoleointment , Itraconazole Eye Drops 1% 1Ml Eye Drop , Iv C Filter , Iv Cannula Butterfly Sizes - 20G, 22G, 24G, , Iv Cannula With Inthracathsize 20G With Inj.Valve ( Port ) . , Iv Cannula With Inthracathsize 26G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 16G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 18G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 22G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 24G With Inj.Valve ( Port ) . , Iv Codan Drip Set . , Iv Extension Set With Three Way --10 Cm , Iv Extension Set With Three Way --100 Cm , Iv Extension Set With Three Way --150 Cm , Iv Set - 4X1.5 ( 0.80 X 38Mm ) Diameter . , Iv Set With Luer Lock , J Tipterrumoglidewire Beta0.022, 0.027 Inch, 150 Cms , J Tipultra Stiff / Super Spport Wire0.018 & 0.014Inch , J Tip Amplatz Ultra Stiff Wire0.035 Inch, 260 Cm, 300 Cm , J Tip Terrumoglidewire0.035 Inch 150Cm , J Tip Terrumoglidewire0.035 Inch, 150Cm, 260Cm , Jejunal Feeding Tube , Jelly Ecg Jelly 250 Gms , Jelly Ecg Jelly 250 Gms Jelly , Jelly Ultra Sound Jelly 250Ml Bottle , Jelly Ultra Sound Jelly 250Ml Bottlejelly , Kallis Pad. , Kenamycin 75Gm. Inj. , Ketamine 100 Mg2ml Inj. , Ketamine Hydrochloride 10Mg / Ml ( 10Ml Vial ) Inj. , Keto Diastix Strip 100Pcs , Ketoconazole 0.02 Ointment , Ketoconazole Ointment 2% 15Gm Tube ( 15 Gm ) , Ointment , Ketorolac Tromethamine + Ofloxacin 5Ml Eye Drop , Ketotifen 5Ml Eye Drop , Knee Cap Large . , Knee Cap Medium . , Knee Cap Small . , Knee Cap With Hinges . , Kojic Acid+Arbutin+Mulberry Extract+Octinoxateointment , Kojic Acid+Vit Cointment , L- Alanyl-L-Glutamine Ffs Bottle 50Ml Iv , L Argine Garanules 5Gms. , L- Isoleucine 560 Mg I - Methoionine 6.8 Mg I - Tryptophan 3 Mg I- Leucine 10 Mg & Arginine Combinationffs Bottle 200 Ml Iv , L S Belt Padded With Dc S / M / L , L S Belt With Pelvic Support S / M / L , L S Frame S / M / L , Labetalol 100 Mgtab , Labetalol 100 Mg Tab. , Labetalol ( 100 Mg ) , Tablet , Lacosamide 100 Mginj. , Lacosamide 200Mg / Vials Injection , Lactic Acid I P 6%W / Wglycine I P 3%W / Wammonium Chloride I P 0.5%W / Wsodium Chloride I P 0.5%W / Wpotassium Chloride I P 0.5%W / Wclacium Lactate I P 0.5%W / Wmagnesium Chloride I P 0. 3%W / Wsodium Dihydrogen Phosphate Dihydrte I P 0.5%W / W 50Gm.. , Lactobacillus Acidophilus & Bifidobacterium Capsulecap Cap , Lactobacillus ( ( Lactobacillus 60 Million Spores ) ) , Tablet , Lactogen Powder No-1, 400Gms Powder , Lactulose 10 G / 15 Ml Oral Solution Sachets Sachet , Lactulose Solution Usp Each 5 Ml Cointains Lactulose Concentrate Usp Equaient To Lactulose 3.325Gm Aqueous Base Q.S ( 200Ml ) Syp , Lactulose Solution Usp Each 5 Ml Cointains Lactulose Concentrate Usp Equivaient To Lactulose 3.325Gm Aqueous Base Q.S ( 200Ml ) Syp. , Lactulose Syrup 200Mlsolution , Lalanine 8.2G + Lglutamine13.46 Inj. , Lamino Spinal Material 50Gsm. Sms Polypropylene Water Repallant Sheet Size 1.5X3m. Incise Sheet 15X35cm. Poly Sheet Lining 1.20X1.20M . , Lamotrigine25 / 50 Tab. , Lancet Point Spinal Needle Sets ( Quincke ) All Size . , Laparoscopic ( 33Cm ) L Hook With Ptfe Coated Ez Clean Electrosurgicla Tip , Laparoscopic Absorbable Mesh Tacker 5 Mm With 30 Preloaded Pgla Tacks Having Ratcheted Mechanism Providing Tactile Feedback When Firing. Us Fda Approved , Laparoscopic Non-Absorbable Mesh Tacker 5 Mm With 30 Preloaded Titanium Tacks Having Ratcheted Mechanism Providing Tactile Feedback When Firing. Us Fda Approved. Us Fda Approved , Laproscopic Drape, Size:150 X 250 Cm, Aperture:30 X 35Cms, 1 Kit , Laproscopic Port Washers, For 10Mm Trocar , Laproscopic Port Washers, For 5Mm Trocar , Large Acetyl Homopolymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Large Size ( 26X15x3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Large Size ( 6.2 X 12.5Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Large Size Abdominal Dressing With Non Adherent For Abdominal Wounds. Usfda Approved. . , L-Arginine I.P. 3Gm Proanthocyanidin 75 Mgrespule , Larygenal Mask Airway Protector- Sterile, Phthalate Free, Single Use Silicone Material Airway Tube With Dynamic Curve And Elongated Cuff To Facilitate The Upper Esophageal Seal. Recommended Maximum Intracuff Pressure Of 60 Cm H20, Unique Cuff Pilot Technology ( In-Built Manometry ) For Continuous Cuff Pressure Monitoring, Allows Direct Intubation With Dual Gastric Access And Mr Safe, Available In Size 3, 4, 5 With Intubating Ability Of Et Tube Having Size Ranging From 6.5 To 7.5 And Larger Og Tube Insertion Ability Of 16 To 18 Fr Respectively. , Laryngeal Mask Airway Blockbuster Disposable Silicone .Fourway Connector Makes It Easy To Fix After Placement, Itegrated Bite Block Prevents Airway Occlusion, Airway Tube Is More Than 95 Degree Angulated Short Airway Tube Provides Easy Insertion And Matches Oropharyngeal Curve, Inlet And Outlet Of Gastric Access Channel Design For Easy Insertion Of Gastric Tube, Sputum Collection Device Can Collect Small Quantity Of Sputum, Guidance Device Allows The Et Tube To Direct Towards Laryngeal Opening At 30 Degree Angle, Which Enhances Success Rate Of Endotracheal Intubation, Better Flexibility And Biocompatibility With Silicone Material. Size - 1, 1.5, 2, 2.5, 3, 4, 5, Should Have Fda And Ce Marked , Laser Fiber - End Firing, 365 Micrometre, Compatible With 100W Laser System , Laser Fiber - End Firing, 550 Micrometre, Compatible With 100W Laser System , Laser Fiber - Side Firing, 550 Micrometre, Compatible With 100W Laser System , Lasilactone 40Mg Tablets , Latanoprost 50Mcg / Ml. 2.5Ml Eye Drop , Latex & Pvc Free Three Chambered Bag 625 Ml ( 740 Kcal ) With Mct Lct Ratio 1:1 For Central Venous Infusion. , Latex & Pvc Free Three Chambered Bag 625 Ml ( 740 Kcal ) With Mct Lct Ratio 1:1 For Central Venous Infusion. , Latex Free Porous & Permeable Elastic Adhesive Bandage 15 Cm , Latex Free Porous & Permeable Elastic Adhesive Bandage 15 Cm , Latovision 0.005% Latanoprost Eye Drop 2.5Mleye Drop , Lead Appron -Skirt / Waist Type , Lead Aprons Adult Size , Lead Aprons With Detachable Thyroid Shield; Size: Large 0.5 Mm Lead Equivalent Radiation Protection , Lead Aprons With Detachable Thyroid Shield; Size: Medium 0.5 Mm Lead Equivalent Radiation Protection , Lead Aprons With Detachable Thyroid Shield; Size: Small, 0.5 Mm Lead Equivalent Radiation Protection , Lead Curtain , Lead Divider 12 X 5 , Lead Divider 15 X 6 , Lead Glass For Dsa 2X4 , Lead Gloves; 6.5 Size , Lead Gloves; 7 Size , Lead Gloves; 7.5 Size , Lead Gown Adult Size , Lead Lettersa To Z , Lead Letters R & L , Lead Markar , Lead Numbers 0 To 9 , Lead Pass Box , Lead Sheilds 11 X 6 , Lead Sheilds 12 X 6 , Lead Sheilds 14 X 17 , Lead Sheilds 14 X 7 , Lead Sheilds 15 X 6 , Lead Sheilds 17 X 7 , Lead Sheilds 7 X 4 , Lead Sheilds 9 X 5 , Lead Table Shield; Saddle Bag Style, Around 52 X 18 1 / 2 X 12 Size, 0.5 Mm Lead Equivalent Radiation Protection , Lead Under-Table Shield; For Attachable Into Table Side Rails, Around 36 X 36 Size0.5 Mm Lead Equivalent Radiation Protection , Lectodex 500Gm. Powder , Led Shield Cover , Led Viewing Box Size 14 X 17 , Left Heart Vent Catheterswith Perforated Tip, Malleable Bodies With Depth Mark, All Vents Should Terminate With A Vented Or Nonvented ¼ Inch Connector, Sizes- 15, 16, 18 , Left Heart Vent Catheters With Perforated Tip, Malleable Bodies With Depth Mark, All Vents Should Terminate With A Vented Or Nonvented ¼ Inch Connector, Sizes- 15, 16, 18 Fr , Lenolidamide 20Mg. Capsule , Leuprobide Depot3.75Iu Inj. , Leuprolide Depot Inj ( 3.75Mg ) , Injection , Levipril 65Mg / Ml Injection , Levodropropizine Ph Eur 30 Mg+Chlorpheniramine Maleate Ip 2Mg / 5Ml, 120Ml Bottle Syp. , Levolin ( 0.6Mg / 2.5Ml ) --Pack Of 5Respules , Levosalbutamol 0.31Mg, Each Respule 2.5 Ml , Levosalbutamol 0.63Mg, Each Respule 2.5 Ml , Levosalbutamol 1.25Mg, Each Respule 2.5 Ml , Levosimendan 12.5Mg / 5Ml Vial Injection , Lidocaine 4%Injection 30Ml Vial , Lidocaine And Prilocaine Cream Usp30gmcream , Lidocaine Hydrochloride 1% ( 10Mg / Ml ) Inj. , Lidocaine Usp 1.0% W / W, Cetrimoide Ip 0.1% W / W, Polyvinyl Polymer 2.8% W / W, Solvent And Propellant Q.S. To 100.0% W / Waerosol Spray 50Gsolution , Lidocaine Usp 1.0% W / W, Cetrimoide Ip 0.1% W / W, Polyvinyl Polymer 2.8% W / W, Solvent And Propellant Q.S. To 100.0% W / Waerosol Spray 50G . Spray , Lifestent:Sfa Stent Self Expending Usfda Approved For Sfa And Popliteal Nitinol Stent With Unique Triple Helix Design Structure For Multi-Dimensional Flexibility With Unique Delivery System Having Both Thumb Wheel And Pin & Pull Mechanism. Diameter 5Mm -7Mm Length: 40Mm, 60Mm, 80Mm, 100Mm, 120Mm, 150Mm &170Mm With Shaft Length 80 Cm And 135 Cm , Ligation Metal Clips Small , Ligation Polymer Clips Large , Ligation Polymer Clips Medium , Ligation Polymer Clips Medium And Large , Lignocaine 5% Spinal, 2Mlinj. , Lignocaine Hydrochloride 4% Eye5ml Vial5ml Eye Drop , Lignocaine Topical 10%. Solution , Lignocaine Topical 4%. Solution , Lignocaine Tropical Sol. Ups 30Ml Eye Drop , Lignocaine Viscousointment , Lipid Emulsion 20% 500Ml With Fish Oil, Soybean Oil And Vitamin E ( 1000 Kcal ) Iv , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 10 Cm X 25 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 13 Cm X 13 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 15 Cm X 15 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 20 Cm X 20 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 8 Cm X 8 Cm , Liquid Embolic System Used For Avm Management Liquid Embolic System Evoh Co-Polymer For Complete Occlusion In Controlled Embolization Procedures Like Avm, Compatable With Item Of Sr. No 1, 2 And 3. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Liquid Embolic System Used For Avm Managementliquid Embolic System Evoh Co-Polymer For Complete Occlusion In Controlled Embolization Procedures Like Avm, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approvedpack With 1.5Ml Liquid Embolic And 1.5Ml Dmso Per Pack , Liquid Hand Wash Solution With Dispenser ( 500Ml ) , Liquid Paraffin?: ?3.75 Ml, Magnesium Hydroxide, Milk Of Magnesia 170Ml Syp. , Liquid Soap 1Ltrsoap , Lithium -450Mg. Tab. , Lma Supreme Size ( 3, 4, 5 ) , Lomustin 40 Mg Cap. , Long 440 Mm, Battery Operated 60 Mm Articulating Endo Cutter ( 45 Degree Both Side ) With A Disposable Battery Pack, 360 Degree Rotation Shaft, 6 Row Staples Offering 60Mm Staple Line And 57 Mm Cut Line, Closed Channel Anvil, Delivering System Wide Pre Compression, ( Proximal 8 Mm, Distal 22 Mm ) , 3 Point Gap Control, Manual Override Safety Feature, Interchangeable Cartridge Options Of 1.0, 1.5, 1.8, 2.0 Closed Staple Height , Long Ergonomic ( 36Cm ) , 5Mm Laparoscopic Shears With 18Mm Curved Coated Blade, Capable Of Sealing, Vessels Up To And Including 7Mm, 360 Degrees Rotation, With Att Compatible With Gen 11 , Long Ergonomic 23Cm, 5Mm Laparoscopic Shears With 15Mm Curved Coated Blade, Capable Of Sealing Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, With Att Compatible With Gen11 , Long Term Hemodialysis Catheter Doluble Lumen 15 Fr , 19, 21, 23, 24, 28, 30, 32, 36, 40 Cm , Long Term Runnel Cuffed With Split Tip, Pre Loaded Hollow Style Hd Antimicrobialcatheter, Should Have Air Guard Valve L-23Cm. = Fr-14.5 . , Long Term Runnel Cuffed With Split Tip, Pre Loaded Hollow Style Hd Antimicrobial Catheter, Should Have Air Guard Valve L-19Cm. = Fr-14.5 . , Long-Term Heamo-Dialysis Catheter Double-Lumen Radio Opaque Split-Tip Catheter 14.5 Fr X 19 Cm With Air Guard Valves Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guide Wire 0.97 Mm X 70 Cm, Tunneled, 18 G Needle & 8 Fr Vessel Dilator , Long-Term Hemo-Dialysis Catheter Duble-Lumen Radioopaque Split-Tip Catheter 14.5 Fr X 19 Cm With Airguard Valved Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guidewire 0.97 Mm X 70 Cm, Tunneler, 18 G Needle & 8 Fr Vessel Dilator , Long-Term Hemo-Dialysis Catheter Duble-Lumen Radioopaque Split-Tip Catheter 14.5 Fr X 27 Cm With Airguard Valved Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guidewire 0.97 Mm X 70 Cm, Tunneler, 18 G Needle & 8 Fr Vessel Dilator , Loop Nylon, 0, 72, ½ Circle, Round Body , Loperamide 2Mg. Tablet , Lorazepam2 Mg / Ml1 Ml Vial , Lorazepam2 Mg / Ml2 Ml Vial , Lorezepam 4Mg. / Ml Inj. , Loteprojnal Etabnate 02%10Mleye Drop , Low Adherent Absorbent Wound Dressing With A Polyester Perforated Wound Contact Layer Size 50Cmx7mtr Roll , Low Molecular Weight Dextran 40000 Inj. , Low Pressure Cuffed Tracheostomy Canula With Sterile Disposable Or Reusable Inner Canula , Low Profile Chemo Plastic Port With Silicon Catheter, Desilet Anti Kinking Sleeves, Fr-9.6, 6.6, 3.9. . , Lp Needle16 G , Lp Shunt , Lp Shunt . , Ls Corset , Lumbar Drainage System ( Lumbar Drain ) , Lumbar Drainage System ( Lumbar Drain ) , Lumbar Puncture Needle20g , Lumber Peritonal Shunt System - Each System Is Supplied Complete With One Lumbar Catheter 40Cm Long. One Periitoneal Catheter 60Cm Long One Special Lumbar Catheter Connecters, Two Suture Collar & One 14 Gauge Thin Wall Touhey Needle. The System Is Sterilized By Ethylene Oxide Gas And Packed In Double Peel Open Packaging. . , Lung Excer Sizer. , Lutein + Zeaxanthin , Vita , C, E, S, Zinc Cap , Lutonix Drug Coated Balloon Drug Coated Balloon With 2 ?G / Mm2 Dose Of Paclitaxel With Polysorbate & Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time035 With 120Cm Shaft: Diameter 4Mm -6Mm , Lengthupto 150Mm / 035 With 75Cm Shaft Diameter 5-12Mm Length 60Mm / 014 With Shaft 150Cm Diameter 1.5Mm -3Mm Length Upto 120Mm , Mac Intosh , Mackintosh -Size 1100Mm Width X 30 Meters Length Double Colour Water Proof Rubber Marked Isi Hospital Rubber Sheeting Is:4135-1974 Packing And Making : As Per Clause No 4.1 And 4.3 / Mtr . , Mackintosh Double Colour Water Proof Rubber Marked Isi Hospital Rubber Sheeting Is:4135-1974 Packing And Making : As Per Clause No 4.1 And 4.3 / Mtr , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene. 6X12 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.7.6X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.10X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.15X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.15X30 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.30X30 Cm Sterile , Magills Forcepsadult Size , Magills Forcepspaediatric Size , Mag-Mag Oint Ointment , Magnesium Hydroxide + Aluminium Hydroxide Simethecon 250 Mg + 250 Mg + 50 Mg / 5 Ml 170 Ml Bottle ( Syrup ) , Syrup , Magnesium Sulphate25% W / V, Amp Inj. , Magnesium Suplhate Ection I.P.50 % W / V 10Ml Ampinj. , Magnesium Suplhate Injection I.P.50 % W / V ( 1 Ml Amp ) ( 1 Ml Amp ) , Ampule , Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures , Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures , Maleurethral Dilator Set; Teflon / Latex , Malecot Catheter , Malecot Catheter ( With Needele ) , Malvix Band . , Mammography Casette With Intensifying Screen 18X24 Cm 18X24cm , Management , Ce Approved., 1000 Ml , Manifold Right Off 3-Way , Mannitol Inj. 10% 350Ml Bottle ( ) , Injection Solution For , Marker Bands Are Designed To Increase Procedure Efficiency By Minimizing Fluoroscopy Exposure With Sheath Profile 5F Compatible Up To 8 X 80 Mm*. Size- Diameters: 3 - 12 Mm, & Lengths: 20 - 300 Mm. , Material Of Housingpolycarbonate ( Pc ) , Mattress Protectorshould Made Up Of Breathable And Spacer Fibers. Breathable, Antimicrobial Finish, Elastic Fit, Washable, 36 X 72 Inches, Colour White, Blue And Freen , Measure Volume Drip Set. , Meatal Dilator - Male , Mechanical Bileaflet Aortic Heart Valvemade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle Should Have Leaflet Guard Design Should Have Flared Inlet At Inflow. Sizes 19Mm, 21Mm, 23Mm, , Mechanical Bileaflet Aortic Heart Valve Bileaflet Mechanical Heart Valve Rotatable, The Material Used Is Pyrolytic Carbon On A Graphite Substrate, 80-90 Degree Opening Angle Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Mechanical Single Leaflet Aortic Heart Valvemade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle Should Have Leaflet Guard Design Should Have Flared Inlet At Inflow. Sizes- 19Mm, 21Mm, 23Mm , Mechanical Single Leaflet Aortic Heart Valve Sinlge Leaflet Tilting Disc Mechanical Heart Valve Rotatable Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Meclizine 25 Mg Tab. , Meclizine 25Mg. Tab. , Mecobalamin Jp 1000Mcg ( B12 ) , Pyridoxine Hydrochloride Ip 100Mg ( B6 ) , Nicotinamide Ip 100Mg ( B3 ) 2Ml Inj. , Medical Oxygen Central Gas Pipe Line Oxygen Outlet , Medical Oxygen Central Gas Pipe Line Vacuum Jar , Medical Oxygen Central Gas Pipe Line Vacuum Outlet , Medical Oxygen Sensor ( Oom202 ) For Ventilator , Medical Penlights , Medicast 3 , Medicated Spirit 1Ltr. Solution , Medicated Spirit 5Ltr. Solution , Medium Large Acetyl Homopolymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Medium Size ( 18X12.5X3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Medium Size ( 3.5 X 5.2Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Medium Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Medium / Large Size ( 5.5 X 8.8Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Mefenamic Acid + Drotaverine Hcl ( 250 Mg + 80 Mg ) , Tablet , Melatonin 3Mg Tab. , Menadione 10Mg / 1Ml Inj. ( Vitamin K-3 And Vitamint K ) , Meningococcal Polysaccharide Vaccine Inj. , Meningococcal Vaccine , Mercaptopurine 50Mg.Tablet , Mersilene Polyester Fibre Tap U.S.P 30Cm X 5Mm With D.A. Needle , Mesalamine 800Mg. Cap. , Methacarbamol 100 Mg. Inj. , Methotrexate 10 Mg Tab. , Methotrexate 15 Mg Tab. , Methotrexate 20 Mg Tab. , Methotrexate 5 Mg Tab. , Methotrexate 7.5 Mg Tab. , Methotrexate ( 10 Mg ) , Tablet , Methyl Cellulose Drops2%10Mleye Drop , Methyl Cellulose / Visco Elastic Pfs 2Ml Eye Drop , Methyl Prednisolone - 32 Mg Tab. , Methyl Prednisolone - 8 Mgcap. , Methyl Prednisolone ( 8Mg ) , Tablet , Methylcellulose Eye Drops , Metoclopramide- 10Mg Tab. , Metoprolol ( 5Mg / 5Ml Ampoule Injection , Metoprolol 1Mg. / Ml Inj. , Metoprolol Inj 1 Mg / Ml ( 5Ml Vial ) , Injection Solution For , Metresses 3X6 With Raxine Cover 4 Density , Metronidazole 100Mg / 5Ml Syrup ( 30Ml ) Syp. , Metronidazole 15Gm 0.01 Ointment , Miconazole 1% + Beclamethasone Dipropionate 0.025%Ointment , Miconazole Ear Drops 5Ml Eye Drop , Micro Catheter 1.8F Fine Cross / Corsier / Unirail 150Cm , Micro Drip Set With Chamber As Per Drugs Act. Specification . , Micro Laryngeal Tube- Clear Micro Laryngeal Tube Is Made Of Pvc With High-Volume Low-Pressure Cuff. Having Thinner And 360Mm Longer Length Tube Body With Smaller Diameter, Designed For Interventions In The Laryngeal Space. Clear Micro Laryngeal Tube, Has Semi-Seated Connector, Valve For Luer And Luer-Lock Syringes, Continuous X-Ray Marker And Graduated. Usfda Approved , Micro Titanium Ligation Device With Locking Mechanism, Sterile, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. , Micro Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing And Precise Tip To Tip Closure. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Microcatheter Superselective Braidedfor Avm Embolisation Super-Selective Flow Directed Braided Micro Catheter Usable Length At Least165cm With Hydrophilic Coating Used For Brain Avm Treatment. Dmso And Compatable With Item Of Sr No 5. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved. , Microcatheter Straight Endhole For Intracranial Stenting 0.027Inch Id 2.8 / 2.8F Od Compatable With 0.014 Inch Guide Wire Straight Tip Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.027 Id 2.8 / 2.8F Od Braided, 145 Cm Usable Length, Permitting 0.014“ Guide Wire Used For Intracranial Stenting, Should Be Compatable With Item Of Sr No 53 — 58. Used Forneurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight Endhole For Intracranial Stenting 0.027Inch Id 2.8 / 2.8F Od Compatable With 0.014 Inch Guide Wirestraight Tip Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.027 Id 2.8 / 2.8F Od Braided, 145 Cm Usable Length, Permitting 0.014 Guide Wire Used For Intracranial Stenting, Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight / Preshaped For Aneurysm Coiling 0.017 Inch Id 2.1 / 1.7F Od 150 Cm Length Compatable With 0.014 Inch Guide Wire Straight Tip / Preshaped 45* & 90* Endhole Single- Lumen Microtatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting0.024 Guide Wire For Intracranial Aneurysm Coiling, Should Be Compatable With Item Of Sr. No. 1, 2 & 5-45. Used For Neurovascular Purpose.Should Be Dcgiand Usfda Approved , Microcatheter Straight / Preshaped For Aneurysm Coiling 0.017 Inch Id 2.1 / 1.7F Od 150 Cm Length Compatable With 0.014 Inch Guide Wirestraight Tip / Preshaped 45* & 90* Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight / Preshpaed Foraneurysm Coiling 0.017 Inch Id 2.4 / 1.9F Od 150 Cm Length Compatable With 0.014 Inch Guide Wirestraight Tip / Preshaped 45* & 90* Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approvedmechanically / Electrically Detachable Bare Paltinum , Microcatheter Straight / Preshpaed For Aneurysm Coiling 0.017 Inch 10 2.4 / 1.9F Od 150 Cm Lengthcompatable With 0.014 Inch Guide Wire Straight Tip / Preshaped 45* & 90” Endhole Single Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7 F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Should Be Compatable With Item Of Sr. No. 1, 2 &5-45. Used For Neurovascular Purpose. Should Be Dcg I And Usfda Approved Mechanically / Electrically Oetachable Bare Paltinum , Microcatheter Superselective Braided For Avm Embolisationsuper-Selective Flow Directed Braided Micro Catheter Usable Length At Least165cm With Hydrophilic Coating Used For Brain Avm Treatment. Dmso Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved. , Microcatheter Superselective Detachable For Avm Embolisation Super-Selective High Flow Directed Micro Catheter With Detachable Tip With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Detachable For Avm Embolisationsuper-Selective High Flow Directed Micro Catheter With Detachable Tip With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Non Braided For Avm Embolisation Super-Selective High Flow Directed Non-Braided Micro Catheter Single Lumen, Endhole, Usable Length L70cm, With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Non Braided For Avm Embolisationsuper-Selective High Flow Directed Non-Braided Micro Catheter Single Lumen, Endhole, Usable Length 170Cm, With Hydrophilic Coating Used For Brain Avm Treatment, Dmso Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcoilsfor Embolization , Micronised Flavonoid Extract 500Mg Tab. , Micronized Progesterone 200 Ml Syp. , Micronized Purified Flavonoid Fraction 500Mg. Tab. , Microporesurgical Tape 3, Inch , Microporesurgical Tape 4, Inch , Microporesurgical Tape 6 Inch , Microporous Antimicrobial Fabric Tape All Size , Micropuncture Set4 F , Micropuncture Set4 Fr , Micropuncture Set 7Cm & 11Cm , Microscope Cover , Microwire For Catheter Tracking 0.014 Inch 200 Cm Length High Torque Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014 200 Cm Hydrophilic Guidewire With Torque Device For Use With Infusion Catheters Compatible With Sr No. 2. Used For Use Neurovascular Purpose, Should Be Dgci And Usfda Approved , Microwire For Catheter Tracking 0.014 Inch 200 Cm Lengthhigh Torque Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014 200 Cm Hydrophilic Guidewire With Torque Device For Use With Infusion Catheters Compatible With Sr No. 2. Used For Use Neurovascular Purpose, Should Be Dgci And Usfda Approved , Midazolam 5 Mg / Ml-Nassal Spray Nasal Spray , Mifepristone 200 Mg + Misoprostol 200 Mcg Kit Of 5 Tab , Mifepristone 200 Mg + Misoprostol 200 Mcg Kit Of 5 Tab , Milkywhite Gel Based Hand Sanitizer, Ethanol ( 60%-65%, Benzalkonium Chloride 0.09% - 1% 100Ml Gel , Milrinnone 1Mg / Ml, 10 Ml Vial ( Inj. ) , Milrinone 1Mg / Ml, 10Ml Vialsinj. , Mini Suction Drain Set , Minicap For Pd Catheter , Minoxidil Ip .....2.0% W / V In A Solution Base Ethyl Alcohol Ip Eq. To Absolute Alcohol ...60% V / V 60Mlointment , Miracle 3.0 , Miracle 6.0 , Mirage Micro Guide Catheter , Mirage Micro Guide Wire , Miscellanous Tablets , Misoprostol- 200Mcgtab , Mist Blowerwith Specialized Nozzle Utilizing A Micro Orifice For Fluid Delivery And A Separate Orifice For Gas Delivery With Malleable Shaft , Mist Blower With Specialized Nozzle Utilizing A Micro Orifice For Fluid Delivery And A Separate Orifice For Gas Delivery With Malleable Shaft , Mitrazapine-7.5Mg. Tab. , Mmr-Vialinj. , Mobile And Single Use Negative Pressure Wound , Modafinil 100Mg. Tab. , Moderate Indwelling Pur Catheter With 70%Isopropyl Alcohol Cap For Peripheral Veins With Siliconized Additional Port. . Sterilized . , Molded Cup Style Surgical N-95 Respirator Mask -Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified , Monifilament Polyamide3-0, 70-75Cm , 24-26Mm, 3 / 8 Circle, Reverse Cutting, , Monifilament Polyamide 2-0 75Cm , 39Mm, 3 / 8 Circle, Reverse Cutting, , Mono Components Insulin 5Mg. Inj. , Mono J Stent , Monofilament Black Polyamide Non Absorable Suture Usp Size 0 40Mm, 1 / 2 Circle Heavy Rb, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 48Mm, 1 / 2 Circle Heavy Rb Loop, 150Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 48Mm, 1 / 2 Circle Heavy Rc, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 4Mm, 3 / 8 Circle Rb Micro Point, 25Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point Da, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 90Mm, 3 / 8 Circle Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 / 0 45Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 / 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 10Mm, 3 / 8 Circle Rc, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 19Mm, 3 / 8 Circle Cutting Pc-5, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 19Mm, 3 / 8 Circle Prime Cutting Pc-5, 60Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 13Mm, 3 / 8 Circle Prime Rc P-3, 60Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Prime Cutting, 35Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 6 / 0 10Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 6 / 0 13Mm, 3 / 8 Circle Prime Cutting Pc-5, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 8 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point, 38Cms , Monofilament Glycomer3-0 75Cm, Undyed19mm3 / 8 Circlereverse Cutting , Monofilament Glycomer3-0 75Cm, Undyed19mm3 / 8 Circlereverse Cutting ( Preferably Us Fda Aproved ) , Monofilament Glycomer3-0 75Cm, Violet26mm1 / 2 Circletaper Point , Monofilament Glycomer3-0 75Cm, Violet26mm1 / 2 Circletaper Point ( Preferably Us Fda Aproved ) , Monofilament Glycomer 631* 0 75Cm, Undyed37mm1 / 2 Circlereverse Cutting , Monofilament Glycomer 631* 0, 90Cm, Violet40mm1 / 2 Circletaper Point , Monofilament Glycomer 631* 1 , 90Cm, Violet40mm1 / 2 Circletaper Point , Monofilament Glycomer 631* 2-0 75Cm, Undyed37mm1 / 2 Circlereverse Cutting , Monofilament Glycomer 631* 2-0 75Cm , Violet26mm1 / 2 Circletaper Point , Monofilament Polyamide * 1 100Cm, Black40mm1 / 2 Circletaper Point , Monofilament Polyglyconate* Cv 5-0 75Cm , Green13mm1 / 2 Circletaper Point , Double Arm , Monofilament Polyglyconate* Cv 5-0 75Cm , Green13mm1 / 2 Circletaper Point , Double Arm ( Preferably Us Fda Aproved ) , Monofilament Polypropylene Mesh With Bioresorbable Polyglycolic Acid Fibers & Hydrogel Coating , Hydrogel Barrier To Minimize Tissue Attachment, Bioresorbable Coating = Sodium Hyaluronate ( Ha ) Carboxymethylcellulose ( Cmc ) , And Polyethylene Glycol ( Peg ) , Ability To Tailor ( Can Easily Be Cut To Customize Shape And Size ) Various Sizes , Monofilament Stainless Steel 2 5X45cm, 40Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 4 2X45cm, 48Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 5 2X75cm, 45Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 5 4X45cm, 48Mm1 / 2 Circleconventional Cutting , Monofilament Stainless Steel 6 2X45cm, 45Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 6 4X45cm, 48Mm1 / 2 Circleconventional Cutting , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 14Cms X 14Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 24Cms X 24Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 30Cms X 30Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1-0 36Mm, 1 / 2 Circle Tp Da 14Cms X 14 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1-0 36Mm, 1 / 2 Circle Tp Da 24Cms X 24 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 2-0 36Mm, 1 / 2 Circle Tp 20 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 2-0 36Mm, 1 / 2 Circle Tp 30 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 40Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 45Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 50Mm, 1 / 2 Circle Rb Heavy Loop 150Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 2 / 0 31Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 3 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 4 / 0 16Mm, 3 / 8 Circle Rc 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 4 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 5 / 0 13Mm, 3 / 8 Circle Tp Da 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 5 / 0 16Mm, 3 / 8 Circle Rc 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 6 / 0 11Mm, 3 / 8 Circle Rb Da 45Cms Dyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 6 / 0 13Mm, 3 / 8 Circle Cc Pc1 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 7 / 0 9.3Mm, 3 / 8 Circle Tp Da 70Cms Violet , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 0 30Mm, 1 / 2 Circle Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Prime Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 26Mm, 1 / 2 Circle Angiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 60Mm, Straight Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Rc, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Prime Rc Ps-3, 45Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 1 40Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 1 50Mm, 1 / 2 Circle Rb Heavy Loop 150Cms Violet 65Mm & 122Cms , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 2 / 0 31Mm, 1 / 2 Circle Rb 70Cms Violet 26Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 3 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 3 / 0 30Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 4 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 2 / 0 26Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 2 / 0 30Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 3 / 0 25Mm, 3 / 8 Circle Prime Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 3 / 0 26 Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 4 / 0 16 Mm, 3 / 8 Circle Rc, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 5 / 0 16 Mm, 3 / 8 Circle Rc, 70Cms Undyed , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Heavy Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 30Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 30Mm, 1 / 2 Circle Heavy Tc , 100Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 45Mm, 1 / 2 Circle Heavy Rc , 100Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 22Mm, 1 / 2 Circle Cutting, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 1 / 2 Circle Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Cutting Pc-3, 60Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Cutting Pc-3, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb Da, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 6 / 0 13Mm ( 282 Microns ) , 3 / 8 Circle Rb Da, 102Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 6 / 0 15Mm, 3 / 8 Circle Cutting Pc-3, 70Cms , Monopolar Cautery Forceps , Morphine Sulphate 1 Ml / Amp Inj. , Morphine Sulphate 20Mg. Tablet , Moxifloxacin Ophthalmic Solution Usp 0.5% Pfs 1. Solution , Moxinidine 100Mg. Tab. , Mpff, 450 Mg Diosmin Plus 50 Mg Hesperidin , Mri Implantable Port With Close-Ended Attachable Groshong Silicone Catheter 8 Fr, J Tip Guide Wire 0.89Mm X 45Cm, 18G Introducer Peel-Apart Sheath 8 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Port With Open-Ended Attachable Hickman Silicone Catheter 9.6 Fr, J Tip Guide Wire 0.97Mm X 50Cm, 18G Introducer Peel-Apart Sheath 10 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Port With Open-Ended Pre Attached Hickman Silicone Catheter 6.6 Fr, J Tip Guide Wire 0.97Mm X 50Cm, 18G Introducer Peel-Apart Sheath 7 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Power Port With Close-Ended Attachable Groshong Silicone Catheter 8 Fr, J Tip Guide Wire 0.89Mm X 45Cm, 18G Introducer Peel-Apart Sheath 8 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mucopolyssacharide Polysulfate ( Heparinoid ) Corresponding To 250 Iuointment , Mucus Extator . , Multi Vitamin Syrup 200Ml Syp , Multiband Trigger ( Gi Band ) . , Multifiltrate Dialysate Line ( 158 Ml ) Compatible With Multifiltrate Machine , Multifiltrate Substitute Line -1 Heater Bag ( Cvvhd / Cvvhdf=159 Ml ) Compatible With Multifiltrate Machine , Multifunctional Mask With The Attachment Of Nebulizer Mask, Venture Mask, Oxygen Mask, Aerosol Mask, Bipap, Cpap Mask With 7 Oxygen Tube. Fda Approved. ( Adult ) , Multifunctional Mask With The Attachment Of Nebulizer Mask, Venture Mask, Oxygen Mask, Aerosol Mask, Bipap, Cpap Mask With 7 Oxygen Tube. Fda Approved. ( Paediatric ) , Multiple Perfusion Set Withpressure Monitoring Lines;Multiport Tip / Integral Stopcock.Femaleluer On Single Inlet With 4 Legs. 7.6 Cm Length Leg With Wide Clamps. , Multiside Pore Catheter / Spary5 Fr , Multivitamin Syrup 60 Ml ( Each 5Ml Contains-Vitamin A ( Palmitate ) Ip 1600 Iu+Vitamin D3 Ip 200 Iu ( +Vitamin B2 Ip 1.00Mg+Vitamin B6 Ip 0.50Mg+Niacinamide Ip 15.00Mg+D-Panthenol Ip 1.00Mg ) , Syrup , Mupriocin 2% + Beclomethasone Diprop. .025%Ointment , Mycophenolate 1000 Mg Tablets , Mycophenolate 720 Mg Tablets , N.G.Tube 5, 6, 7, 8, 10 . , Nadifloxacine Ointment 15 Gmointment , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 10Cm.X10cm , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 10Cm.X20cm. , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 5Cm.X5cm. , Naproxen Sodium 500Mg. Tab. , Nasal Prongs Adult Size , Nasal Prongs Paediatricssize , Naso Biliary Drinage , Naso Billary Drain Catheter 10 Fr , Nasogastrictube { Fr ) 10Fr , Nasogastrictube { Fr ) 12Fr , Nasogastrictube { Fr ) 14Fr , Nasogastrictube { Fr ) 16Fr , Nasogastrictube { Fr ) 8Fr , Nasogastric Tubes ( Ng Tube ) Size -14, 16, 18. , Nasogastric Tubes ( Ng Tube ) Size -5, 6, 7, , Nasogastric Tubes ( Ng Tube ) Size -8, 10, 12, , Nasopharyngealairway5mm , Nasopharyngealairway5mm, 6Mm, 7Mm, 8Mm , Nasopharyngealairway 6Mm , Nasopharyngealairway 7Mm , Nasopharyngealairway 8Mm , N-Butyl-2Cyanoacrylate 0.25Ml / Unit Each Mesh , Nebulization Full Kit ( Adult ) As Per Drugs Act. Specification , Nebulization Full Kit ( Pediatrics ) As Per Drugs Act. Specification , Nebulizinginhalation Cap.Inhaler , Needle Burner & Syringe Destroyer , Needle Knife Sphincterotome , Needle Of Nerve Locator ( Length 100Mm ) . , Needle Of Nerve Locator ( Length 150Mm ) . , Needle Of Nerve Locator ( Length 25Mm ) . , Needle Of Nerve Locator ( Length 50Mm ) . , Nekethamide Amp Inj. , Neomycin + Polyxmycin ( Nevasulf ) 10Gm. Powder , Neomycine1700 Iu5 Gm. Ointment , Neosporin + Dexamethasone 10 Gm. Ointment , Neosporin 10 Gm. Powder , Neosporin 5Gm.Eye Ointment , Neosporin Ear Drop+ Hydrocortisone Ear5ml Eye Drop , Neosporin Ear / Eye Drop 5Ml Eye Drop , Neostigmine 2.5Mg / 5Ml5 Ml Ampoule Injection , Neostigmine ( 0.5Mg / Ml ( 1Ml Amp ) , Injection , Nephazoline 5Ml Eye Drop , Nephrostomy Tube , Nerve Locator Needle ( 5Cm, 10Cm ) 5Cm , 10 Cm , Nicorandil 2Mg / Ml Vial Injection , Nicorandil 5 Mg Tab. , Nicotinamide ( 20 Mg ) + Riboflavin ( 5 Mg ) + Clavulanic Acid ( 125 Mg ) + Phosphate ( 0.6 Mg ) + L-Ornithine L-Aspartate ( 250 Mg ) 60Ml Syp. , Nifedipine- 5Mg Tab. , Nifedipine - 10Mg Tab. , Nifedipine 0.3% W / W + Lidocaine 1.5% W / W In Organogel Basecream , Nimodipine 20Mg / Vial Injection , Nimodipine 60 Mg Tablets , Nitroglycerine Patch 5 Mlointment , Nitrous Regulater With Tubing Set , Niv Mask ( Full Face ) . , Niv Mask ( Medium ) . , Non - Sterile Examination Latex Gloves Long Couf6, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf6.5, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf7, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf7½, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf8isi Mark . , Non - Sterile Surgical Latex Gloves6, Isi Mark . , Non - Sterile Surgical Latex Gloves6.5, Isi Mark . , Non - Sterile Surgical Latex Gloves7, Isi Mark . , Non - Sterile Surgical Latex Gloves7½, Isi Mark . , Non - Sterile Surgical Latex Gloves8 Isi Mark . , Non Absorbable 3 / 8 Circle, 9.3 Mm Polypropyleneblue 6-0, Round Body, Tungsten-Rhenium’S Needle, Cc Double ( 220 Microns ) Double Needle Monofilament 60 Cm , Non Absorbable 3 / 8 Circle, 9.3 Mm Polypropyleneblue 6-0, Taper Point, Bv-1, Tungsten-Rhenium’S Needle, Double Needle Monofilament 60 Cm , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate Coated With Polyster Braided Greenwith Size 5, 1 / 2 Circle Taper Cutv-55, 55Mm Braided 75 Cm, 4 Suture Per Foil ) , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate Coated With Polyster Braided Green Size 4-0 1 / 2 Circle Taper Cut 2 X V-5Double Needle 17Mm, 90Cm , Non Absorbable Surgical Suture, ( Synthetic ) Monofilament Polypropylene Blue, Prolene Size 2-0 1 / 2 Circle V-7 Tapercut Double Needle 26Mm , Non Absorbable Surgical Suture, ( Synthetic ) Monofilament Polypropylene Blue, Prolene Size 5-0 1 / 2 Circle R.B. ( 320 Microns ) 13Mm, Double Needle, Pledgets 3Mm X 3Mm X 1.5 Mm 60Cm , Non Alcohol, Aqueous Base Hand Sanitizer, Benzethonium Chloride Usp 0.2% 100Ml. Solution , Non Alcohol, Aqueous Base Hand Sanitizer, Benzethonium Chloride Usp 0.2% 500Ml. Solution , Non Compliant, Multilayer Peripheral Balloon With Ultra High Pressure Of 40 Atm. With Choice Of 2 Shaft Lengths Of 75 And 120 Cm. Size- Diameter ( 5Mm To 12Mm ) & Lengths ( 2, 4&6Cm ) . , Non Ionic Contrast Media 300 Mg. 10 Ml.Inj. , Non Ionic Contrast Media 350 Mg. 20 Ml.Inj. , Non Shrinkable Polyurethane Material Iv Line For Long Term Iv Therapy, Should Have Infection Control Device Filled With Isopropyl Alcohol Xro, Siliconized Non Return Valve . , Non-Absorbable Polymer Locking Clips Provide Cool Secure Ligation; Clip Locks Onto The Vessel. Clip Sizes Medium, Medium-Large, Large And Extra-Large. The Non-Absorbable Polymer Clip Is Inert, Nonconductive, Radiolucent, And Does Not Interfere With Ct Or X-Ray Diagnostics. Us Fda Approved , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001t Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001vs Size : 4-0, 3 / 8 Circle Cutting 16Mm, 90Cms 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5002 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5003 Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5004 Size : 0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5005 Size : 1, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5006 Size : 2, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5011 Size : 1, 1 / 2 Circle Tc 30Mm, 110Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5017 Size : 0, 3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5028 Size : 3-0, 3 / 8 Circle R C, 26Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5028t Size : 3-0, 3 / 8 Circle R C, 26Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5029 Size : 6-0, 3 / 8 Circle R B, 13Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036 Size : 2-0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036a Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036at Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036t Size : 2-0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037 Size : 0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037a Size : 0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037t Size : 0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5049 Size : 4-0, 1 / 2 Circle R B, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5052 Size : 2-0, 1 / 2 Circle R C, 50Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5061pcm Size : 4, 1 / 2 Circle Rb 35Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5062 Size : 1, 3 / 8 Circle Cutting, 60Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5063 Size :1, 1 / 2 Circle Rb 40Mm, Heavy, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5070 Size : 3-0, 1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5080 Size : 5-0, 3 / 8 Circle R C, 12Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5082 Size : 4-0, 3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5083 Size : 3-0, 1 / 2 Circle R B, 35Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5085 Size ; 3-0, 1 / 2 Circle Rb 25Mm, 90Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5086 Size : 4-0, 1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5087 Size : 3-0, 1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5090 Size : 5-0, Straight R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5096 Size : 5-0, 3 / 8 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5098 Size : 5-0, 1 / 2 Circle T C, 17Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5290 Size : 2-0, Straight Cutting, 60Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5332n Size : 3-0, 1 / 2 Circle Rb 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5333 Size : 2-0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5333t Size : 2-0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5334 Size : 0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5334t Size : 0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5335 Size ; 0, 3 / 8 Circle Rb 25Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5610 Size : 2-0, 1 / 2 Circle T C, 17Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5670 Size : 2-0, 1 / 2 Circle T C, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 617 Size : Green 2-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 617A Size : White 2-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 625 Size : Green 3-0, 1 / 2 Circle R B Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 632 Size : Green 3-0, 1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 635 Size : Green 4-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 636 Size : Green 3-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 637 Size : Green 2-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 637A Size : White 2-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 640 Size : Green 4-0, Sraight Cutting Da, 53Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 643 Size : Green .2, 1 / 2 Circle T C Heavy, 45Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 645 Size : Green 5, 1 / 2 Circle T P Heavy, 55Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 652 Size : Green 3-0, 1 / 2 Circle R B Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 669 Size : Green 3-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 672 Size : Green 4-0, 3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 677 Size : Green 2-0, 1 / 2 Circle T C Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 677A Size : White 2-0, 1 / 2 Circle T C Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 679 Size : Green 0, 1 / 2 Circle R C , 50Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 680 Size : Green1, 1 / 2 Circle R C , 50Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687 Size : Green 2-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687A Size : White 2-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687L Size : White2-0, 1 / 2 Circle Taper Cut, Double Arm26mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 690 Size : Green 5-0, 3 / 8 Circle R B Da, 12Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 691 Size : Green 4-0, 3 / 8 Circle R B Da, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 695 Size : Green 4-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 696 Size : Green 5-0, 3 / 8 Circle R B Da, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3303 Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3304 Size : 0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3305 Size : 1, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3306 Size : 2 , 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3315 Size : 5-0, 3 / 8 Circle Cutting, 16Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3317 Size : 5-0, 3 / 8 Circle R C, 12Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3318 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3318S Size : 4-0, 3 / 8 Circle Cutting 16Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3321 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3326N Size : 4-0, 3 / 8 Circle Cutting, 10Mm, 38Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328 Size : 3-0, 3 / 8 Circle R C, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328A Size : 3-0, 3 / 8 Circle R C, 26Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328At Size : 3-0, 3 / 8 Circle R C, 26Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328T Size : 3-0, 3 / 8 Circle R C, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 6-0, 3 / 8 Circle Cutting, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 7-0, 3 / 8 Circle Cutting, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 8-0, 3 / 8 Circle Cutting, 13Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336 Size : 2-0, 3 / 8 Circle R C, 45Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336A Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336At Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336Dk Size : 2-0, 3 / 8 Circle R C, 45Mm, 110Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336T Size : 2-0, 3 / 8 Circle R C, 45Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3338 Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3338A Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 45Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3340 Size : 0 ( Loop ) , 1 / 2 Circle R B , 40Mm, 150Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3346 Size : 0, 1 / 2 Circle R B Heavy, 40Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3348 Size : 1 ( Loop ) , 1 / 2 Circle R B Heavy , 50Mm, 150Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3388 Size : 3-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3389 Size : 0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3390 Size : 2-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 9038 Size : 8-0, 1 / 2 Circle Cutting, 7Mm, 30Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 9038 Size : 8-0, 1 / 4 Circle Cutting, 6.5Mm, 30Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 18 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2070Lp Size : 7-0, 3 / 8 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2076Lp Size : 7-0, 3 / 8 Circle T P D A, 6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2078Lp Size : 7-0, 3 / 8 Circle T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2078S Lp Size : 7-0, 3 / 8 Circle T P D A, 8Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2079L Lp Size : 7-0, 3 / 8 Circle T P D A, 9.7Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2079Lp Size : 7-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2086Lp Size : 8-0, 3 / 8 Circle T P D A, 6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2087Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2088L Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2088Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 805 Size : 0, 1 / 2 Circle T C, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 806 Size : 2-0, 1 / 2 Circle T C, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 807 Size : 2-0, 1 / 2 Circle T C, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8121B Lp Size : 7-0, 3 / 8 Circle Antiglare T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204 Pl3 Size : 4-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204 Size : 4-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204Vs Size : 4-0, 1 / 2 Circle Rb 13Mm Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8205Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8207 Pl3 Size : 6-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8207Lp Size : 6-0, 1 / 2 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 822 Size : 3-0, 1 / 2 Circle R B Da, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 823 Size : 6-0, 3 / 8 Circle Slim Blade Cutting, 15Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 825 Size : 3-0, 1 / 2 Circle R B, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 829 Size : 6-0, 3 / 8 Circle R B Da, 13Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 830 Size : 0, 1 / 2 Circle R B ( Heavy ) , 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8304B Lp Size : 7-0, 3 / 8 Circle Antiglare T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8305B Lp Size : 6-0, 3 / 8 Circle Antiglare T Pd. A., 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8307B Lp Size : 6-0, 3 / 8 Circle Antiglare T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8321B Lp Size : 5-0, 3 / 8 Circle Antiglare T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 835 Size : 4-0, 1 / 2 Circle T C Da, 17Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 838 Size : 3-0, 1 / 2 Circle R B, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 840 Size : 1, 1 / 2 Circle R B ( Heavy ) , 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 840A Size : 1, 1 / 2 Circle R B ( Heavy ) , 30Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 841 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 842 Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 842T Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843 Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843A Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 35Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843T Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 849 Size : 4-0, 1 / 2 Circle R B, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8521 Size : 4-0, 1 / 2 Circle T P D A, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8522 Size : 3-0, 1 / 2 Circle T P D A, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8526 Size : 2-0, 1 / 2 Circle T P D A, 30Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 853 Size : 4-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8556 Pl3 Size : 5-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8556Lp Size : 5-0, 1 / 2 Circle T P D A, 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8557 Size : 4-0, 1 / 2 Circle T P D A, 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 857 Size : 4-0, 1 / 2 Circle Tc 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Lp Size : 5-0, 1 / 2 Circle T P D A, 10Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Mlp Size : 5-0, 1 / 2 Circle Tp 10Mm Da, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Slp Size : 5-0, 1 / 2 Circle Tp 10Mm, Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Spl3 Size : 5-0, 1 / 2 Circle Tp 10Mm, Da, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8611Lp Size : 6-0, 1 / 2 Circle T P D A, 10Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8612Lp Size : 6-0, 3 / 8 Circle R C, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8613Lp Size : 6-0, 1 / 2 Circle T P D A, 13Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8614B Lp Size : 8-0, 3 / 8 Circle Antiglare T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 867 Size : 4-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 870 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8702Lp Size : 7-0, 3 / 8 Circle T P D A, 9.7Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8703Lp Size : 8-0, 3 / 8 Circle Rb, Cc Needle 9.3Mm, Da , 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710 Pl3 Size : 5-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 13Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710S Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8725B Lp Size :6-0, 3 / 8 Circle Antiglare Tp 13Mm, Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726Lp Size : 6-0, 3 / 8 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726M Lp Size : 6-0, 3 / 8 Circle T P D A, 12.3Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726S Lp Size : 6-0, 3 / 8 Circle T P D A, 13Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8727Lp Size : 6-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8731Lp Size : 7-0, 3 / 8 Circle T P D A, 6.5Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8732Lp Size : 8-0, 3 / 8 Circle T P D A, 6.5Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8735Lp Size : 7-0, 3 / 8 Circle T P D A, 7.6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8741Lp Size : 8-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 878 Size : 6-0, 3 / 8 Circle R C, 12Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 878Vs Size : 6-0, 3 / 8 Circle Rc, 12Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 879 Size : 4-0, 3 / 8 Circle R C, 12Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 880 Size : 5-0, 3 / 8 Circle R C, 12Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804L Lp Size : 6-0, 3 / 8 Circle T P D A, 10Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804Lp Size : 6-0, 3 / 8 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804Vs Lp Size : 6-0, 3 / 8 Circle Rb 10Mm Da, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8805 Lp Size : 6-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8805M Lp Size : 6-0, 3 / 8 Circle T P D A, 9.7Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8806Lp Size : 6-0, 3 / 8 Circle T P D A, 9Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 880Vs Size : 5-0, 3 / 8 Circle Rc, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 881 Size : 5-0, 3 / 8 Circle R B, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 882 Size : 5-0, 3 / 8 Circle R B Da, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 883 Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8832 Size : 3-0, 1 / 2 Circle T P, 26Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 883Mb Size : 1, 1 / 2 Circle Rc Heavy, 40Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 887 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 888 Size : 3-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8935 Pl3 Size : 4-0, 1 / 2 Circle T C ( Pledget 3Mm X 3Mm X 1.5Mm ) , 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8935 Size : 4-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 S Size : 3-0, 1 / 2 Circle Tc 17.5Mm Single Arm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 Sa Size : 3-0, 1 / 2 Circle Tc 17.5Mm, Single Arm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 Size : 3-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8937 Size : 2-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 894 Size : 0, 1 / 2 Circle T C Heavy , 30Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 896 Size : 1, 1 / 2 Circle T C Heavy , 30Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8976 Size : 3-0, 1 / 2 Circle T C Da, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8977 Size : 2-0, 1 / 2 Circle T Cda, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8977L Size : 2-0, 1 / 2 Circle T C Da, 26Mm, 150Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 898 Size : 2-0, 1 / 2 Circle T C Da, 17Mm, 70Cm 1 Foils , Nonabsorbable, Braided, Sterile, Surgical Suture Composed Of Poly ( Ethylene Terephthalate ) . It Is Prepared From Fibers Of High Molecular Weight, Long-Chain, Linear Polyesters Having Recurrent Aromatic Rings As An Integral Component. Size - 5 , Nonabsorbable, Braided, Sterile, Surgical Suture Composed Of Poly ( Ethylene Terephthalate ) . It Is Prepared From Fibers Of High Molecular Weight, Long-Chain, Linear Polyesters Having Recurrent Aromatic Rings As An Integral Component. Size- 2 , Non-Pvcdeph With Micro Needle For Ntg . , Norfloxacin 400 Mg + Lactic Acid 120 Million Spores Tab. , Norfloxacin 400 Mg + Tinidazole 600 Mg + Lactic Acid Bacillus 120 Million Spores Tab. , Norfloxacine Suspension 30Ml ( 30 Ml Bottle ) Syp. , Nylon 2-0 Cutting Body , Nylon 3-0 Cutting Body , O.P.N.C. Ballooncomplete Sizes Sequence , O.P.N.C. Balloon Inflation Device , O2 Regulatore With Tubing Set , Octreotide Lar 30Mg Injection , Oestrogenointment , Ofloxacin 200Mg +Tinidazole 600Mg Tab , Ofloxacin With Dexamethasone0.3 %+0.1%5 Ml. Eye Drop , Ofloxacine + Betamethasone Eye Ointment. 5Gm Ointment , Ofloxacine Eye Ointment.Ointment , Olanzapine 10 Ml Inj. , Olmesartan Medoxomil Bp 20Mg, Amlodipine Besilate Ip, Equivalent To Amlodipine 5Mg, Hydrochlorthiazide Ip 12.5Mg, Colours: Ferric Oxide Usp-Nf ( Yellow ) And Titanium Dioxide Ip Tab. , Olopatadine 0.5% 5Ml Eye Drop , Omega 3 Fatty Acidffs Bottle 50Ml Iv , Omega 3 Fatty Acid Concentration Iv. , Ommaya Reservoir Pediatric Size , Ommaya Reservoiradult Size ( Large ) , Ommaya Reservoirpediatric Size , Onabotulinumtoxina 50Iuinj. , One Action Stent Introduction System , One Vial Each Of Bac2 ( 50-90 Mg / Ml Fibrinogen ) And Thrombin ( 800-1200 Iu / Ml Human Thrombin ) Frozen Solutions ( 1Ml ) , One Vial Each Of Bac2 ( 50-90 Mg / Ml Fibrinogen ) And Thrombin ( 800-1200 Iu / Ml Human Thrombin ) Frozen Solutions ( 2Ml ) , One Vial Of Bac 2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved.Sizes- A- 8 Inch In Size With Curved For Ml / L / Xl. B- 11 Inch In Size With Right Angle 70° , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved. Sizes- 6 And 8 , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Containing An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 10 X10 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 12 X 15 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 15 X 20 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 15 X 25 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 20 X 30 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 25 X 36 Cm , Ophthalmic Irigation Solution 500 Ml.. Solution , Optically Guided Bladeless 12 Mm Trocar With Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal, 100Mm Length. , Optically Guided Bladeless 5 Mm Trocar With Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal, 100Mm Length. , Optional Ivc Filter With One Piece Nitinol Body, Electropolished Conical Shaped Designwith Dual Level Filtration Having Both Caudal And Cranial Migration Resistant With Anchors Benefit With Highly Visible Snare Tip Seamlessly Welded To The Body For Easy Filter Retrieval Even After Long In-Dwell Times. Gives You Both Femoral And Jugular Approaches. Size- Femoral & Juglar , Oral Airways Black , Oral Airways Blue , Oral Airways Blue, Black, White, Green Orange , Yellow, Red , Oral Airways Green , Oral Airways Orange , Oral Airways Red , Oral Airways White , Oral Airways Yellow , Orinidazole Ffs Bottle 100Ml Iv , Oseltamivir H1 N1 Antiviral Cap 40 Mg Tab. , Oseltamivir H1 N1 Antiviral Cap 80 Mg Tab. , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tipflanged, Radiopaque Basket Tips / Soft Tips With 45 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tipflanged, Radiopaque Basket Tips / Soft Tips With 90 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tip Flanged, Radiopaque Basket Tips / Soft Tips With 45 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tip Flanged, Radiopaque Basket Tips / Soft Tips With 90 Degree Angle Tip , Oxcabazepine 300 Tab. , Oxcabazepine 450 Tab. , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 2X 14 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 2X 3 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 4X 8 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 6X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7 Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size -4X4, . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7 Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size - 1X2, . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size 4X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Wovenmaterial, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Approved By Us Fda Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Approved By Us Fda Size 4X4 Inch , Oxidized Regenerated Cellulose, Based Topical Absorbable Hemostat Structured Non-Woven Material With Bactericidal Property. Ease Of Use In Both Open And Minimally Invasive Procedures- 1X 2 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Based Topical Absorbable Hemostat Structured Non-Woven Material With Bactericidal Property. Ease Of Use In Both Open And Minimally Invasive Procedures- 2X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 1X 1 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 1X 3.5 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 3X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 6X 9 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property.Size 1X3.5Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property.Size 3X 4Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 1X1 Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 6X 9Approved By Us Fda , Oxygen Aerosol Mask ( Pediatrics Size ) . , Oxygen Catheter10no. . , Oxygen Catheter2no. . , Oxygen Catheter4no. . , Oxygen Catheter6no. . , Oxygen Catheter8no. . , Oxygen Centar Gas Pipe Line Oxygen Flow Meter Full Set With Ce - Certification ( ??? ?????? ?? ?? ?? ?? ????? ??? ???? ????? ??? ?? ?????? ???? ????? ?? ????? ?????? ???? ?? ?????? ???? ????? ???? ????? ?? ???? ?? ???? ??? ) ???????????? ?? ?????????? ??? ??????? ??????? Point ?? Flow Meter ??? ?? ??? ?? ?? ???? ????? Point ?? Flow Meter ??? ???? ?? ???? ???? ?????? ?? ?????? ???? ???? ???????? , Oxygen Flow Meter With Adjustment Valve Full Set Iso Certifide , Oxygen Mask Adult ( Standard Size ) . , Oxygen Mask Peadiatrics ( Standard Size ) . , Oxygen Mask With Tubing Set All Size , Oxygen Nasal Cannula ( Child ) . , Oxygen Nasal Cannula ( Infant ) . , Oxygen Outlet , Oxygen Regulater With Tubing Set , Oxymetazole Nasal Drops10mleye Drop , Oxymetazoline Nasal Drop 0.25% 10Mleye Drop , Oxymetazoline Nasal Solution Solution , Oxytetracycline Hcl 10 Mg. / Gm5 Gm. Ointment , P.O.P Bandage 4, , P.O.P Bandage 6, , Paediatric - Double Lumen Catheter, 4.5Fr Full Set With Rolleson Syringe. , Paediatric - Triple Lumen Catheter, 5.5 Fr Full Set With Rolleson Syringe. , Paediatric Adjustable Collar For Extrication:- Paediatric One-Piece Immobilisation Device With 12 Precise Setting In One , Collar Suitable To Different Neck Sizes, Dimensions: 56 X 18 X 1.5 Cm, Radio Translucent, Cat Mri Compatible. Iso Certified , Paediatric Arterial Cannulae , For Arch Cannulation.Dlp Pediatric One Piecearterial Cannulae. Vented ¼ Inch Connector With Bluehub, Sizes- 10, 12 , 14, 16 , Paediatric Drip Set. , Paediatric Epidural Setset , Paeditrics Oxygenatorspriming Volume Maximum Should Be Less Than 50Ml.Minimum Operating Volume Approx. 30 Ml • Maximum Blood Flow Rate Should Be 0.2-1.2.Ltrs / Min.• Oxygen Transfer Should Not Be Less • Oxygen Transfer Should Not Be Lessthan 250Ml / Min.• Heat Exchange Efficiency Should Not Be Less Than 0.65.Surface Areaof The Fibers Should Be Approx0.8 To 1.0M2 . • Heat Exchanger Fibre Material Should Be Made Of Polyurethane [ Tpu ] And Surface Area Should Be Approx. 0.22-0.50M2 . Blood Inlet Port 3 / 8 Blood Outlet Port 1 / 4Cardioplegia Port 1 / 4 Gas Inlet Port 1 / 4 Gas Outlet Port 1 / 4Water Port 1 / 2 Maximum Pressure Blood Inlet 1000Mmhg, Water Inlet 42 Psi • Blood Storage Capacity Of Hard Shellreservoir Should Be Max 3000Ml.• Minimum Operative Volume Of Hard Shell Reservoir Should Be 150Ml. , Pancreatic Stent 4 Fr - 7 Cm Length , Pancrunium10 Mg 5 Ml Inj. , Pancuronium 4Mg / 2Ml Ampoule Injection , Pancuronium2 Mg / Ml Inj. , Papain Enzyme Ip _> 481 / Mg Tu Of Activity 5% ( W / W ) + Urea 5% ( W / W ) , Silk Protein Hydrolysate 0.5% Emulsfier Qs 25G. , Papaverine 20Mg / Ml Ampoule Injection , Para Amino Benzoic Acid 100 Mg Biotin 5 Mg Zinc 25 Mg Calcium Pantothrnate 100 Mg Nicinamide 30 Mg Acetyl Cysteine 100 Mgtab1. Tab. , Paracetamolsuppository 160 Mg , Paracetamol 100 Mg / Ml, 150 Ml Drop ( 150 Ml ) , , Paracetamol 75 Mg / Ml ( 10 Ml Inj ) , Injection , Paracetamol Drop 15Ml Eye Drop , Paracetamol Suppositry 125Mg, ( 1X5 Cap ) , Paracetamol Suppositry 250Mg ( 1X5 Cap ) , Paracetamol Syrup / Suspension 125 Mg / 5Ml ( 60Ml Bottle ) Syp. , Paraffin Gauze ( One Box Of 20 Pcs ) Box , Paraffin Liquid ( Liquid Paraffin 1.25Ml + Milk Of Magnesia 3.75Ml + Sodium Picosulphate 3.33Ml ) - Syrup , Parcaine Surface Anesthetic. Solution , Partially Absorbale Intraperitonial Umbilical Hernia Patch With Positioning Pockets, Straps.Pod Sorbaflex Memory Ring, With One Side Light Weight Polypropylene Mesh And A Unique Hydrogel Based Barrier On The Other. Size 6.4 Cm Circle , Partially Absorbale Intraperitonial Umbilical Hernia Patch With Positioning Pockets, Straps.Pod Sorbaflex Memory Ring, With One Side Light Weight Polypropylene Mesh And3a Unique Hydrogel Based Barrier On The Other. Size 4.3 Cm Circle , Patch Buprenorphine ( 20Mcg ) , Consumable , Patient Roller And Transfer Board , Pcn Set, 12Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcn Set, 14Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcn Set, 16Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcnl Alken Metal Dilators With Central Rod , Pcnl Basket , Pcnl Initial Puncture Needle; 18G, 15Cm , Pcnl Initial Puncture Needle;18G, 20Cm , Pcnl Nephrostomy Tube; 20 Fr 40 Cm , Pd ( Peritoneal Dialysis ) Catheter Adult , Pd ( Peritoneal Dialysis ) Catheter Pediatric , Pec Hemostatic Patch For Post Renal Dialysis Size 5Cm X 7Cm , Pec Hemostatic Patch For Post Renal Dialysis Size 5Cm X 7Cmtulle Grass Paraffin Gauze Dressing Sterile Leno Weave With Soft Paraffin Base. Size 15Cm*2Mtr , Pediatricarterial Filter Withbypass Loopthe Arterial Filter Should Be For Pediatric Use. Priming Volume Should Not Be More Than 90Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or ¼. The Filtershould Allow Maximum Blood Flow Rate Of 4.0 To 5.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Pediatric Arterial Filter With Bypass Loopthe Arterial Filter Should Be For Pediatric Use, Priming Volume Should Not Be More Than 90Ml, Filter Pore Size Should Be 30- 40 Micron, The Outlet And Inlet Blood Ports Should Be 3 / 8 Or 1 / 4 Inch, The Filtershould Allow Maximum Blood Flow Rate Of 4.0 To 5.0 L / Min, Thefilter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Pediatrics Endotoxin 0.22 Micron, Triple Layer 96 Hour Iv Filter . , Peg Set , Pegylated + L-Asparginase 3750Iu / 5Ml-Pfs Inj. , Penile Clamp , Pentoxifylline Tab. , Pentoxiphylline 20 Mg / Ml Inj. , Per Cuteneous Endscopic Gasrostomy Tube , Percutaneoustransluminalvalvuloplasty Super Thin Coaxially Constructed , Percutaneous Endoscopic Gastrostomy ( Peg ) Tube Full Set , Percutaneous Nephrostomy ( Pcn ) Catheter With Needle All Size , Percutaneous Nephrostomy Kit Containig Guidewire, Dialators-5 Pigtail Catheter Size- 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 30Cm. , Percutaneous Pigtail Nephrostomy Catheter Sizes-5F, 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 30Cm. , Percutaneous Pigtail Superapubic Catheter Set Containing Pigtail Catheter, S.S. Trocar Needle And Introducer Size- 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 22Cm. , Percutaneous Surgical With Minilapsystem- A Manual Instruments For Direct Introduction To Surgical Site Without Need For Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A- Alligator Thumb Grip Graspers ( 2.3Mm ) B- Clutch Thumb Grip Graspers ( 2.3Mm ) C- Babcock Thumb Grip Graspers ( 2.3Mm ) D- Bowel Thumb Grip Graspers ( 2.3Mm ) , Percutaneous Surgical With Monopolar System- Direct Introduction To Surgical Site Without Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes-A-Curved Spatulaprobes ( 2.4Mm ) B-Straight Spatulaprobes ( 2.4Mm ) C-Hook Probes ( 2.4Mm ) D-Conical Probes ( 2.4Mm ) , Percutaneous Surgical With Monopolar System- Direct Introduction To Surgical Site Without Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes-A-Curved Spatulaprobes ( 2.4Mm ) B-Straight Spatulaprobes ( 2.4Mm ) C-Hook Probes ( 2.4Mm ) , D-Conical Probes ( 2.4Mm ) , Percutaneous Tracheostomy Tubesize 7 And Size 8 , Perforator Adult Size , Pericardial Sumps Size 20 Frshould Feature A Fluted Tip, Should Be Encased In A Stainless Steel Spring And Should Have Weight At The End. , Pericardial Sumps Size 20 Fr Should Feature A Fluted Tip, Should Be Encased In A Stainless Steel Spring And Should Have Weight At The End. , Perindopril 4Mg Tablets , Perindopril 8Mg Tablets , Peripheral L.V. Catheters . , Peripherally Inserted Central Cathetersize 22X40 , Peripherally Inserted Central Cathetersize 22X60 , Peripherally Inserted Central Cathetersize 22X80 , Peripherally Inseted Central Catheter With Distally Located Valve And Close-Ended 5 French Single-Lumen, 45Cm., 55Cm. . , Peritoneal Dialysis Transfer Set , Peritoneal Fluid -Dianeal 1.5% , Peritoneal Fluid -Dianeal 2.5% , Peritoneal Fluid -Dianeal 4.25% , Peritoneal Fluid -Extraneal 7.5% , Permanent Fixation Device Made Of 316L Stainless Steel Having Cannula Lenth Of 37Cm With Smooth Polyetheretherketone ( Peek ) Cap To Eliminate Exposed Metal Tip And Help Minimize Adhesions To The Fastener And Also With Fastner Level Indicator With Metric Scale To Facilitate Lap Measurments- 30 Fastners , Permanent Pacemaker Dual Chamber+ Leads ( Fda Approved Not Ce Approved ) , Permanent Tunnel Catheter19 Cm & 21 Cm , Permethrine 0.01 Ointment , Permethrine 0.05 Ointment , Pethidine 100 Mg Injection , Pethidine 50 Mginj. , Phenethyl 50 Mg Inj. , Phenibarbitone ( 250Mg / 5Ml ) Injection , Phenobarbitone100mg / Ml 1Ml Amp.Inj. , Phenobarbitone - 30 Mgcap. , Phenobarbitone ( 100Ml ) Syp. , Phenobarbitone . - 200 Mg / Mlinj. , Phenoxybenzamine 1Vial Inj. , Phenoxybenzamine 50 Mg / Ml Ampoule Injection , Phenylepherineophthal. Sol 5Ml Eye Drop , Phenylephrine 10Mg / Mlampoule Injection , Phenylephrine Hcl 10Mg / 1Ml Inj. , Phenytion Sodium Susp. 25Mg / Ml ( 200Ml ) Syp. , Phenytoin Sodium 250 Mg / 5 Ml ( 5Ml Vial ) Inj. , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. Ophy1010 - 10 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1215 - 12 Cm X 15 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1520 - 15 Cm X 20 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1525 - 15 Cm X 25 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy2030 - 20 Cm X 30 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy2536 - 25 Cm X 37.5 Cm , Picc Silicon Line For Infant. Xro, F-26, L-50Cm, Fr-1.9, With Peelable Canula, Protective Sleeves, Silicon Hub, Fda Approved Trimming Tool. . , Pigtailmarkercatheter5 Fr With 100 Cm , Pigtail Catheter Single Puncture With Dilator Set 14, 16 & 18 Each - 45 Cm Length , Pigtail Cathter ( Angiography ) 5Fr Long And Short , Pigtail Drainage Catheter Set With 10F / 12F Locking Catheterwith Dilator Set, Guide Wire, Connector, 2 Way Stop Cork, Needle, Scalpel In A Tray Pack , Pilocarpin Pfs Vialinj. , Pilocarpine 0.5 % / 1Mlinj. , Pilocarpine Eye Drops 2%5Ml Eye Drop , Pistol Grip Curved Coagulating Shears Ergonomic Handle With Att, Shaft Lengths 45Cm. Can Seal Blood Vessels Upto And Including 7Mm In Diameter, Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle In The Following Shaft Lengths 3 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 7Mm In Diameter With Att.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 45 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter.Compatible With Gen 11 , Placentntrex Inj. , Plain Catheter 14, 16, 17, 18, 20 , Plain Disposable Drape Sheet, 120Cm X 150Cm , Plain Sheet Size- 120X210cm ( Sky Blue ) , Plasma Expander Inferon 500Ml Ffs / Bfs Bottle . Solution , Plasma Filter For Plasmapheresis , Plasma Lyte-A- 500 Mla Sterile Non Pyrogenic Isotonic Solution , Plasma Lyte-A- 500 Ml A Sterile Nonpyrogenic Isotonic Solution , Plastar Of Paris ( Per Kg ) Per Kg , Plastic Apron ( Disposible ) . , Plastic Apron ( Reusable ) . , Platinum Coil$ For Aneurysm Embolisation 3D 7Mm X 20Cm Mechanically / Electritally Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 7 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneufiysm Embolisation 3D Smm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgl And Usfda Approved , Platinum Coils For Aneurysm Embolisation 30 16Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriale & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 16 Mm X 30 — 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgjand Usfda Approved , Platinum Coils For Aneurysm Embolisation 30 4Mm X Jocm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 10 Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 10 Mm X 30 Cm, Compatable With Sr. No.3 & 4. Used For Neurovascular Purpose .Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 10Mm X 20Cm Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 10 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfoa Approved , Platinum Coils For Aneurysm Embolisation 3D 12Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 12 Mm X 30 - 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 14Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 14 Mm X 30 - 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 18Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 18 Mm X 30 - 40 Cm, Comparable With Sr. No 3 & 4. Used For Neurovascular Purpose. , Platinum Coils For Aneurysm Embolisation 3D 20Mm X 30 - Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 20 Mm X 30 - S0 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 22Mm X Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 22 Mm X 50 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 25Mm X Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 25 Mm X 50 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 2Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 2Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 3Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 3Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 30 Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 4Mm X 12Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 12 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 4Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 20Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 7Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 7 Mm X I5 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 9Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropr ( Ate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 9 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 9Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 9 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D Smm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 2Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size2 Mm X 2 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 6 Cm, Compatable With Sr. No‘3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 6 Cm, Compatable With Sr. No 3 & 4.Should Be Dcgi And Usfdaapproved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System Helical Configuration, For Intra-Cranial Aneurysm ’Embolization, Of Size 4 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Pcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix Smm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helixsmm X 20Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Heiicaiconfiguration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular , Platinum Coils For Aneurysm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 2 Cm, Compatable With Sr.No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 4Mm X 8Cm Mechanically / Electrically Detachable Barepaltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra- Cranial Aneurysm Embolization, Of Size 4 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 8Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 8 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 8Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 8 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Pledget 3X3mm Firm 10 Starnds , Pledget Oval 3X6mm Firm 10 Starnds , Pledget Oval 3X6mm Firm 10 Starnds , Pledget Square 4.5X6mm Firm 10 Strands , Plegiocard ( 20Ml ) Potassium Solution , Ployglecaprone 25 & Polypropylene Hernia System Mesh Large With Pollyglicaprone 25 Underlay Film , Ployglecaprone 25 & Polypropylene Hernia System Mesh Meduim With Pollyglicaprone 25 Underlay Film , Ployglecaprone 25 & Polypropylene Hernia System Mesh Oval With Pollyglicaprone 25 Underlay Film , Pm O Line { M- F } ---200 Cm , Pm O Line { M- M } --- 200 Cm , Pneumococcal ( Polysaccharide ) Vaccine 13 Valent / 0.5Ml Inj Vaccine , Pneumococcal Conjugate Vaccine 13 ( O.5 Ml Pfs ) Inj. , Policresulen 50 Mg+ Cinchocaine Hydrochloride 10 Mg30 Mg Tube , Poliglactin 910, Size 2-0 With 26Mm, 5 / 8 Circle, Round Body Needle, 90Cm , Poliglactin 910, Size 2-0 With, 30Mm, Fish Hook Needle, 70Cm, Round Body , Poly Propylene Mono Filament Sterile Precut With 1 / 2 Cir Rb Heavy Needle 30Mm Length 70 Cm Non Absorbable ( Surgical Sutures Usp Size 1 ) , Digonstic , Poly Propylene Mono Filament Sterile Precut With 1 / 2 Cir Rb Needle 30 Mm Length 70 Cm Non Absorbable Surgical Sutures Usp Size 2 / 0 ( 12 Foils / Pkt ) , Surgical Material , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt , Size 6 Cm X6 Cm , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt, Size 10 Cm X 10 Cm , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt, Size 15 Cm X 25 Cm , Polyamide Black Monofilament, 1 / 2 Circle Reverse Cutting Heavy , 1 No., 45Mm , 100Cm , Polyamide Black Monofilament, 3 / 8 Circle Reverse Cutting, 2-0, 45Mm , 70Cm , Polyamide Black Monofilament, 3 / 8 Circle Reverse Cutting, 3-0, 26Mm , 70Cm , Polyamide Black Suture 70 Cm, Size 2-0, 45Mm 3 / 8 Circle Reverse Cutting Needle, 1 Foil , Polybutester With Polytribolate Coating* 2-0 90Cm, Blue26mm1 / 2 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 4-0 90Cm, Blue17mm1 / 2 Circletaper Point, Double Arm , Polybutester With Polytribolate Coating* 5-0 75Cm, Blue12mm3 / 8 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 5-0 90Cm, Blue17mm1 / 2 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 6-0 75Cm, Blue9mm3 / 8 Circletaper Point , Double Arm , Polybutester With Polytribolate Coatingl* 3-0 90Cm, Blue26mm1 / 2 Circletaper Point , Double Arm , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 5Fr 26Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 6Fr 16Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year . , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 6Fr 26Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year . , Polydiaxanone1 No.Voilet Monofilament 150 Cm Loop, 1 / 2 Circle Roundbody Ctx Needle 48Mm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Left Inguinal Hernia Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Left Inguinal Hernia Small Size 12Cm X 8Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia Small Size 12Cm X 8Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia / Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia / Small Size 12Cm X 8Cm , Polyester Monofilament Self Fixing Mesh With Absorbable Polylactic Acid Grips Size 15Cm X 15Cm , Polyester Monofilament Self Fixing Mesh With Absorbable Polylactic Acid Grips / Size 15Cm X 15Cm , Polyester Multifilament Collagen Ipom 3D Weave Mesh With Prefixed Sutures For Lap Ventral Hernia Surgery 20Cm X 15Cm , Polyglactin 910 Violet Sutre 180 Cm.Size 1, 40 Mm 1 / 2 Circle Round Body Tapercut Doubleneedle, 1 Foil , Polyglactin 910 Withtriclosan Coating1, 1 / 2 Circle Reverse Cutting O.S, 40 Mm, 100Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating1, 1 / 2 Circle Round Body, 40 Mm, 100 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating1-0, 1 / 2 Circle Reverse Cutting O.S, 40 Mm, 100 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating3-0, 1 / 2 Circle Round Body, 20 Mm, 75 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating 1-0, 1 / 2 Circle Round Body, 40 Mm, 100Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating 2-0, 1 / 2 Circle Round Body, 30 Mm, 100 Cm, Usfda Approved , Polyglycolic Acid Size -1, 130Cm. At One Suture End 50Mm, 1 / 2 Circle Round Body Heavy Needle And Another Needle 80Mm, Straight Round Body Attached At Loop, 80Cm, Away From Free End Of Suture , Polymaide Mono Filament ( Nylon ) With Cd Cut Needle 20 Mm Length 70 Cm Size 2 / 0 ( 12 Foils / Pkt ) , Polymer From Deagraded Gelaltin + Nitrogen + Elecrolytes Ffs Bottle 500 Ml Iv , Polymer Ligation Device With Locking Mechanism, Sterile, Radiolucent Property, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. Sizes- A- Medium Large Polymer Ligation Device. B- Large Ligation Device. C- Extra Large Ligation Device. , Polymer Ligation Device With Locking Mechanism, Sterile, Radiolucent Property, Usfda Approved. Cartridges Should Have Self-Adhesive Backing.A- Medium Large Polymer Ligation Device. B- Large Ligation Device. C- Extra Large Ligation Device. , Polymer Pledget Ptfe Suture Buttress 6 Pledgets Per Packet, 7 Mm X 3 Mm X 1.5 Mm , Polymer Prosthesis For Cbd / Pancreatic Duct 10 / 12Cm . Single Pg Tail With Flaps At Proximal And Distal End. With Side Holes On Curves End And Spiral Holes At Straight End. Size 7 / 8 / 9 / 10 Fr. , Polymide Suture Size 3-O, 70Cm, 26Mm 3 / 8 Circle Rc Needle , Polymixicn + Chloromphenical +Dexamethasone 10 Gm.10 Gm. Ointment , Polypectomy Snare , Polypen Cannula ( Iv Cannula Without Flang ) 20 G , Polypen Cannula ( Iv Cannula Without Flang ) 22 G , Polypen Cannula ( Iv Cannula Without Flang ) 24 G , Polypropylene2-0 90 Cmblue26mm1 / 2Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene3-0 90 Cm, Blue17mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene4-0 75 Cm, Blue17mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene4-0 90 Cm, Blue22mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue12mm3 / 8 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue13mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue17mm1 / 2 Circletaper Poin, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene6-0 75 Cm, Blue11mm3 / 8 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene6-0 75 Cm, Blue13mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene7-0 60 Cm Blue9mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene7-0 75 Cm Blue10mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene8-0 60 Cm Blue8mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 10 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 15 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 30 X 30 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 6 X 11 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 10 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 15 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 30 X 30 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 6 X 11 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 7.5 X 15 Partialy Absorabable Mesh , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Extended , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Large , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Medium , Polypropylene, Size 6-0 , Polypropylene, Size 7-0 , Polyurethane Catheter With Introducer For Tpn, One Heparin Stopper, Non Return Valve. Should Have Integral Cap With 70% Isopropyl Alcohol Sterilized, Ce. . , Polyurethane Picc Line For Infant. Xro, F-24, L-15 / 20Cm, Fr-2, With Micro Flash Canula. Fda Approved Trimming Tool. . , Polyurethane Picc Line For Newborn. Xro, Fr-28, L-25Cm, Fr-1 With Splitting Canula And Stylet. Fda Approved Trimming Tool. . , Polyvinyl Alcohol 14Mg In 1Ml, Povidone 6Mg5ml Eye Drop , Porcine Bio Prosthetic Heart Valvemitralshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Porcine Bio Prosthetic Heart Valvemitral Should Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Porcine Bio Prosthetic Heart Valve Aortic Should Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size-19Mm, 21Mm, 23Mm , Porcine Bio Prosthetic Heart Valve Aorticshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size-19Mm, 21Mm, 23Mm , Portable Wound Closer System Three Pressure Settings:-75Mmhg, -100Mmhg And -125Mmhg, 7.5X20cm Pu Foam, 3 Layer Drape Canister 200Ml And Silicon Gel Dressing , Post Matum Gloves 6, Isi Mark . , Post Matum Gloves 6.5, Isi Mark . , Post Matum Gloves 7, Isi Mark . , Post Matum Gloves 7½, Isi Mark . , Post Matum Gloves 8 Isi Mark . , Postpartumhemorrhage Balloon Silicon Catheter For Control Of Obstetrical Bleeding Or Management Of Pph. Size- 24Fr, Length- 54Cm, Balloon Capacity-500Ml, . , Potassioum Iodide Calcium Chloride Dihydrate Eye Drops 1 Eye Drop , Potassium Free, Hemodialysis Fluid By Carbo Made ( Part A Part B ) , Povidine Iodine Gargle 1%, 100 Ml Liquid , Povidine Iodine Mouth Wash ( 100Ml ) Solution , Povidone Iodine 1% Eye Drop5ml Eye Drop , Povidone Iodine 7.5% Oitment500gm Ointment , Povidone Iodine Vaginal Pessary200mg. Ointment , Pramipexole 0.5 Tab. , Pramipexole 1.5 Tab. , Prasugrel 10Mg Tablets , Prazosinxl 2.5 Mgtab. , Prazosinxl 5 Mgtab. , Prednisolon Accetate Ophthal 5 Ml 5Ml Eye Drop , Prednisolon Eyrop5ml Eye Drop , Prednisolone 10 Mg Tab. , Premixed Human Insulin Analogue ( R-Dna Origin ) Mixture Of Soluble Insulin Aspart 30% And Protamine Crystallised Insulin Aspart 70% 100 Iu / Ml In 3Mlpfs ( 1 X 3Ml ) Inj. , Premixed Human Insulin Analogue ( R-Dna Origin ) Mixture Of Soluble Insulin Aspart 50% And Protamine Crystallised Insulin Aspart50% 100 Iu / Ml In 3Ml Pfs ( 1X3ml ) Inj. , Prenam 400Gmspowder , Pre-Operative Skin Preparation Solution- Patient Pre-Operative Skin Preparation Solution In One-Step Sterile Applicator Container For Single Use With 2% Chlorhexidine Gluconate ( Chg ) And 70% Isopropyl Alcohol ( Ipa ) With Orange Tint Colour For Easy Visualization, Fda Approved. Size-26 Ml, 10.5 Ml, , Pressure Bag 1000Ml , Pressure Bag 500Ml , Pressure Bags , Pressure Dome , Pressure Garment For Post Burn Deformity Pressure For Various Part Of The Hole Body . , Pressure Monitoring Line= Pm Oline { M- F } 200 Cm , Pressure Monitoring Line= Pm O Line { M- M } 200 Cm , Pressure Tranducer , Pressure Transducer Assembly , Pressure Tubing 200Cm , Primaquin 2.5Mg Tab. , Primaquin 7.5Mg Tab. , Priming Volume Should Not Be More Than 120Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or 3 / 8. The Filter , Prism0cal ( Bicarb 22 ) 5 Litre Bag For Crrt , Prism0cal ( Bicarb 32 ) 5 Litre Bag For Crrt , Prismosol ( Bicarb 22 ) 5 L Bag For Crrt , Prismosol ( Bicarb 32 ) 5 L Bag For Crrt , Procaine Penicillin Powder For0.4Mg Mv / Vial Inj. , Procaine Surface Anesthetic 3Ml Inj. , Procarbazin 50 Mg Cap. , Procedural Kits Henia Kit Size 6Cmx11cm Polypropylene Mesh & 3 Sutures 1 Prolene Mesh, 1 Polyglicapron 25 & 2 Polypropylene Suture , Procedural Kits Henia Kit Size 7.6Cm X15cm Polypropylene Mesh & 3 Sutures 1 Prolene Mesh, 1 Polyglicapron 25 & 2 Polypropylene Suture , Progesteronebp-100Mg Cap , Programmable Vp Shunt One Pack , Prolene Double Ended Round Body 6-0 , Prolene Double Ended Round Body 7-0 , Prolinate Depot Inj. , Promethazine 25 Mg / Ml ( 10 Ml Vail ) Inj. , Promethazine 5Mg / 5Ml ( 100Ml ) Syp. , Promethazine Inj 25 Mg / Ml ( 10 Ml Vail ) , Prone Bolsters , Propylene Glycl Ip 4.96 % W / W Carbomer Ip 0.76% W / W, Colloidal Silver 32 Ppm Triethanolamine Bp 0.32% W / W Purified Water Ip Qs Tube Of 50 Gm1. Solutions , Proseal Lma Size ( 3, 4, 5 ) Size ( 3, 4, 5 ) , Prostegmin Inj. , Protamine 10Mg / Ml-5Ml Ampoule Injection , Protective Disk With Chg Hydrophilic Polyurethane Absorptive Foam With 86.8 Mg Chlorhexidine Gluconate ( Chg ) 1 Disk ( 2.5 Cm ) 7 Mm Center Hole With Radial Slit, , Protein + Vitamins + Minerals + Dha Pwr 200Gm. Powder , Protein + Vitamins + Minerals + Dha Pwr 200Gm. Scrub , Prothrombin Complex Concentrate 1000Iu , Prothrombin Complex Concentrate 1000Iu Inj Injection , Prothrombin Complex Concentrate 500 Iu , Prothrombin Complex Concentrate 500 Iu Inj Injection , Protine Powder 200Gms , Providone Iodine + Metronidazole ( 5 % + 1 % 15 Gm Tube ) , Ointment , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 15X15 Each Mesh , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 30X30 Each Mesh , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 6X11 Each Mesh , Ptfearterial Catheterwith Guide Wireand Introducer Needle Xro. G- 20, Luer Lock. . , Ptfe Coated Cardiac Pacing Wire* 3-0 60Cm -2X12, 17Mm1 / 2 Circletaper Point , Ptfe Coated Cardiac Pacing Wire* 3-0 60Cm, 17Mm1 / 2 Circle Round Body And Straight Cutting Needle With Breakaway Point , Ptfe Feltptfe Felt ( Thick ) ( Nominal Thickness 2.87Mm ) . 4In X 4In, 10.2Cmx10.2Cm ) , Ptfe Feltuniquely Designed To Provide Non Absorbent Tissue Protection , Ptfe Felt Ptfe Felt ( Nominal Thickness 1.65Mm ) . 4In X 4In, 10.2Cmx10.2Cm ) , Ptfe Felt Uniquely Designed To Provide Nonabsorbent Tissue Protection , Ptfe Guide Wire, Straight Tip, 150Cm, 0.035 Diameter , Pu Foam 400 - 600 Microns Pore Size Foam Withtherapeutic Reticulated Accurate Care , Puncture Needle , Puncture Needle 16G, 7Cm Length , Pur Catheter Non Shrinkable Iv Line With Prefilled 70% Isopropyl Alcohol Cap For Peripheral Veins. Xro, And With Non- Return Valve . , Pur Material Xro Needle Prick Freei V Catheter With Metal Introducer. . , Pur Umbilical Venus Catheterwith Xro. Fr-2.5, L-30Cm. Luer Lock, Stopcock. . , Pur Umbilical Venus Catheterwith Xro. Fr-3.5, L-30Cm. Luer Lock, Stopcock. . , Pva Particals300, 500, 700, 1000 Micron , Pvccorrugated Rubber Drain . , Pvc Tubing - 12 Feet , Pyridium, 200Mg Tablets , Pyridoxine 40Mg Tablets , Quadrivalent Human Papillomavirustype 6, 11, 16, 18 Vaccineinj. , Quinine Dihydrochloride - 300Mg / Ml ( 2Ml Amp ) Inj. , Quinine Sulphate - 300Mgtab , Quinine Sulphateip-600Mg Tab. , Rabies Immunoglobines Vialinj. , Radial Introducer Puncture Set4 Fr , Radial Puncture Needle 18G , Radial Puncture Needle 20G , Radial Sheath 5Fx7cm , Radial Sheath 6Fx16cm , Radial Sheath 6Fx7cm , Radial Sheath 7Fx16c , Radial Sheath 7Fx7cm , Radiation Protection Screen6 X 3 , Ramosetron 0.3Mg / 2Ml Vial Inj , Ramosetron 5Mcgcap , Raney Clips / Raney Clips Provides For Hemostasis Of Scalp Flap Edges, Available In Stainless Steel, Plastic Sterile Removable Disposable Clips . , Raneys Clip Pack Of 30 , Ranibizumab 0.3 Mg / Ml Inj. Prefilled Syringe , Ranibizumab 0.5 Mg / Ml Inj. Prefilled Syringe , Ranibizumab 10Mg. / Ml Inj. Prefilled Syringe , Rapid Priming Set Length 35Cm And 40Cm With2 Spike , Rapidure Slab 75 Cm . , Rasigline 0.5Mg Tab. , Rasigline 1Mg Tab. , Rebrithing Beg 0.5 Ltr. , Rebrithing Beg 1 Ltr. . , Rebrithing Beg 1.5 Ltr. , Rebrithing Beg 2 Ltr. , Recombinant Human Growth Hormone 4 Iu / Vial Inj. , Recombinant Human Platelet Derived Growth Factor 100 Mcg Ointment , Reconstitution With The Contents Of The Bacteriostatic Solvent Cartridge Gives A Concentration Of 5.83 Mg Per Ml. , Rectified Spirit ( 90% ) Solution , Regular Human Insulin 40 Iu ( Actrapid ) 10Ml Vial Inj. , Regular Wall Patch Of Ptfe No Pre Clotting, Thickness -0.6Mm Sizes:- 3Cm X 3Cm, , Regular Wall Patch Of Ptfe No Pre Clotting, Thickness -0.6Mmsizes:- 3Cm X 3Cm, , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 5.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 5.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 6.0Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 6.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 7.0Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 7.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 8.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 8.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 9.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection, Sizes- 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 Mm. , Reinforced Epidural Wired Polyurethane Catheter Kit With Stainless Steel Needle. Size- Catheter-19G, Needle-17G. . , Reload For Liner Cutter 55 Mmreload For Liner Cutter 55 Blue , Reload For Liner Cutter 55 Mmreload For Liner Cutter 55 Green , Reload For Liner Cutter 75 Mmreload For Liner Cutter75 Green , Reload For Liner Cutter75 Mmreload For Liner Cutter 75 Blue , Remifentanil 1Mg / 1Ml Inj. , Reservoir Adult Size ( Large ) , Reservoir Bag1 Litr , Reservoir Bag2 Litr , Reservoir Bag500 Ml , Reservoir Bag ( 500Ml, 1Litr, 1.5 Litr, 2 Litr ) 500 Ml, 1;Iter, 1.5 Liter, 2 Liter , , Reservoir Bag 1.5 Litr , Respule Salbutamol 5Mg., 2.5Ml , Respules Budesonide Respules 0.25Mg / 2Ml , Retrieval Snare System , Reusable And Washable Antimicrobial Four Layern 99 Mask. Should Have Adjustable Clips To Prevent Air Leking And Fogging On The Eye Wear. , Reusable Linear Cutter-55 Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings & Separate Knife - Blade Module. , Rh-Erythropoetin ( 2000 I.U ) , Pfs , Riluzole 100Mginj. , Riluzole 50Mg. Tab. , Rinato Wire 190Cm , Ringer Lactateot Packffs Bottle 45 Ml Iv , Risedronate 35 Mg Tab. , Risedronate 70 Mg Tab. , Risperidone 1Mg Tab. , Risperidone Trihexyphenidyl Hydrochloride Lets 2+2Mg. Tab. , Risperidone Trihexyphenidyl Hydrochloride Lets 3+2Mg. Tab. , Rivastigmine 1.5Mg Tab. , Rivastigmine 2 Mg Cap. , Rivastigmine 3Mg Tab. , Ro Antiscalant Chemical 5 Liter Can For Autoclaves Machine , Robertsuterinecatheter 5F , Rocronium Bromide 100Mg / 10Ml Inj. , Rocronium Bromide 50Mg / 5Ml Inj. , Rocuronium 5Mlvial Injection , Ropinirole 0.2% ( 10Ml ) Inj. , Ropinirole 0.75% ( 20Ml ) Inj. , Ropivacaine 0.75%, 20 Ml Vial Injection , Roprinole 0.25 Tab. , Round Gel Head Rest Large Size , Round Gel Head Rest Small Size , Round Gel With Silicon Head Rest Large Size , Round Gel With Silicon Head Rest Small Size , Roxithromycin Ip-150Mg, Colours+Brilliant Blue Lake + Titanium Dioxide Ip. Tab. , Runthrough Ns Floppy Preformedj , Ryles Tube ( Pvc ) Adultsize 14, 16, 18 . , Ryles Tube ( Pvc ) Size : Adult ( 18, Each ) , Tube , Ryles Tube ( Pvc ) Size : Adult: 16 ( Each ) , Consumable , Ryles Tube ( Pvc ) Size : Children: All Size . , Ryles Tube ( Size 14 Each Piece ) , Consumable , Safe Delivery Kits - O Gauze Swab O Abdominal Sponge ( X-Ray Op. ) O Umblical Cord Clamp O Umblical Cord Ties O Umblical Tabular Band ( Elastic ) O Umblical Scissor O Sutures O Needle Holder O Mucus Extractor With Adopter O Syringe ( 20 Ml ) O Baby Wipe ( 60×60 ) O Baby Diapero Baby Blanket O Baby Garment O Feeding Bottle O Maternity Gown O Maternity Pads Omaternity Mesh Pantyo Surgeon Caps O Surgeon Gown O Surgeon Gloves ( Sterile Surgical Latex Glovesbeaded, 6½, 7, 7½, Each Three Pair Isi Mark ) O Lignocaine Gel O Povidone Iodine Solutions O Plastic Tray O Applicator Stick O Perineal Sheet With Legging O Maternity Drape Sheet O Under Pad With Collecting Bag O Instruction Sheet, O Measuring Tape, O Dimension Detail Sheet, O Pen O Id Band ( Pediatric ) , O Id Band Adult , O Waste Bag , Salbutamol 15Ml ( 5Mg. / Ml ) Solution , Salbutamol 2Mg. ( 5Ml ) Inj. , Salbutamol 5Mg., 2.5Ml Powder , Salbutamol Nebuliser Solution Bp-Sabutamol Sulphate Eq. To Salbutamol 1Mg Per Ml ( 2.5 Ml Amp ) , Ampule , Salbutamol Rota 200 Mcginha. , Salbutamol Rotacap ( 30 Caps ) Rotacap , Salbutamol Syp 2Mg / 5Ml 100 Mlsyp. , Salbutomol Solution For Nebulizer 5Mg / Ml Bott. . Solution , Saline ( Sodium Chloride ) 10Mlnasal Drop , Salisylic Acid 500Gm. Powder , Sartacanazole Nitrate 2% 10Gm. Ointment , Schirmer Tear Test Ophthalmic Strips Per 50 Sterip. Solution , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 17 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att.Compatible With Gen 11 , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 9 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att Compatible With Gen 11 , Sclerotherapy Needle , Scoline ( 10 Ml ) Vial ( 50Mg / Ml ) --10 Ml Vial Injection , Securestrap Open 2 Point Fixation Device For Open Hernia Repairs With A Curved Cannula & Strap-Positioning Tip Having A Forward-Tilted Handle & Metric Ruler. It Is A Trigger-Squeeze Mechanical Device With A Curved Cannula, Pre-Loaded With 20 Absorbable Straps Which Are Made Of A Blend Of Polydioxanone Dyed With D&C Violet No. 2 And An L ( - ) -Lactide / Glycolide Copolymer. Inserted Length Of Strap Should Be 6.7 Mm. , Selective Salpingography Catheter , Self Adhering Silicon External Catheter Should Be Built In Band, Clear Coated, Breathable, Odorless, Single . Sterilized, Size:- 6, 8, 10, 12, 14, 16, 18, 20, 22, , Self Expandable Biliary Stent- Electro Polished Self-Expanding Nitinol Stent With Four Tantalum Spoons Of Both Sides Of Stent. All Sizes 6F Sheath Compatible. Multiple Deployment Methods For Controlled And Accurate Deployment, , Self Expanding Nitinol Stent ( 5Mm To 14Mm ) & Lengths ( 2Cm, 4Cm, 6Cm, 8Cm, 10Cm, 12Cm ) With Shaft Length Of 80Cm & 135Cms , Self Expanding Nitinol Stent Encapsulated Between Two Ultrathin Layers Of Eptfe Grafts ( Both Luminal And External Surface Covered By Graft ) . Flared Ends To Ensure Proper Wall Apposition. Carbon Coated Luminal Surface To Reduce Early Stage Platelet Adhesion. Stent Graft Mounted On Multifunctional Tip-Less Braided Catheters With Stent Loc Mechanism. Size- Diameter : 5Mm To 13.5 Mm Lengths: 20Mm, 30Mm, 40Mm, 60Mm, 80 Mm, 100Mm, 120M , Self Expending Usfda Approved For Sfa And Popliteal Nitinol Stent With Unique Triple Helix Design Structure For Multi-Dimensional Flexibility With Unique Delivery System Having Both Thumb Wheel And Pin & Pull Mechanism. Size- Diameter 5Mm -7Mm Length: 40Mm, 60Mm, 80Mm, 100Mm, 120Mm, 150Mm &170Mm With Shaft Length 80 Cm And 135 Cm. , Self Gripping Mesh With Polyester Monofilament Pre-Cut With Absorbable Polylactic Acid Grips For Left Inguinal Hernia / Small Size 12 X 08 Cm, Us Fda Approved , Selodermointment , Senquel Ad Gel Gel , Sequential Compression Device- Should Provide Sequential Gradient And Circumferential Compression Around The Ankle, Calf And Thighcontroller Should Provide The Pressure Of 45 Mmhg At The Ankle Area, 40 Mmhg At The Calf Area & 30 Mmhg At The Thigh Area. , Sequential Compression Sleeves Around The Ankle, Calfand Thigh, • Pressure Range From 45 Mm Hg-130 Hg With Therapeutic Pressure & Highest Pressure For Foot Cuff. • Should Have Different Compression Level At All The Points, • Sleeves Should Have Three Bladders For Giving Optimal Compression And Three Different Chambers With Different Pressure At Each Chamber, • Should Comply All Of This Safety Standard , Should Be Approved By Usfda & Ce , Serenase Nasal Drops 1 Pack , Sertaconazole Nitrate Bp ..20 % W / W Preservative:Benzyl Alcohol Ip 10Gm 0.05 Ointment , Sertraline Hydrochloride 100Mg. Tab. , Sertraline Hydrochloride 25Mg. Tab. , Sevelamer 400 Mg Tablets , Sevelamer 800 Mg Tab. , Shk Catheter1.0, 2.05F , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-10, Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-12Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-4, 22Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-6, 22Cm . , Short Pencil Point Spinal Needle G-25, L-38Mm . , Short Ptfe Material Emergency Catheter With Floswitch And Stabilising Device. G-16, L- 130, 160Mm. . , Should Allow Maximum Blood Flow Rate Of 4.0 To 6.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Sildenafil 25Mg Tablets , Silicon Condom Catheter , Silicon Feeding Tube For Long Term Access. Fr-5. L-125Cm. . , Silicon Feeding Tube For Long Term Access. Fr-6. L-125Cm. , Silicon Feeding Tube For Long Term Access. Fr-9. L-125Cm. , Silicon Nasopharyngeal Airway, With Adjustable Flange And Viden End Sterilized Sizes- 2022, 24, 26, 28, 30, 32, 34, 36, Fr. . , Silicon Ring Mounted Illumination Consumable.For Use With 5-8Mm Open Surgery Medical Devices .40 Gm Assembly With 3Mtr Cable Should Provide Five Hours Illumination, Ce Certified , Silicon Vessel Loop Blue Maxi , Silicon Vessel Loop Red Maxi , Silicone ( 100% ) Catheter Two Way 14 , 16, 18, 20 , Silicone ( 100% ) Catheter Two Way 6 , Silicone ( 100% ) Catheter Two Way 8 . , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X30 / 75Cm Da, Oval Pledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 16Mm , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X30 / 75Cm Da, Oval Pledget 4.5X6 Mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X36 / 90Cm Da, Oval Pledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Coated , Braided Polyester* 2-0 Blue 1X30 / 75Cm Da, Oval Pledget 3X6mm, Soft Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Sheet, Size 10 Cm X 10 Cm , Silicone Sheet, Size 6 Cm X 6 Cm , Silk 2-0 Cutting Body , Silk 2-0 Round Body , Silk 3-0 Round Body , Silk Protein And Antimicrobial Silver Dressing Pu Foam 10X10 Cm , Silk Protein And Silver Oxide Based Mesh Wound Dressing 10X25cm , Silk Protein And Silver Oxide Based Mesh Wound Dressing 20X40 Cm , Silk Protein And Silver Oxide Based Wound Dressing 10X25 Cm , Silk Protein Derived Wound Dressing 10X10 , Silk Reel 2-0 X 25Mtr , Silklikecloth , Hypoallergic Surgical Tape 2.5Cm X9.1 Meter , Silver Filling Instrument . , Silver Nitrate 0.2% Glycerol 2% & Purifired Water 25G. , Silver Nitrate Gel 0.2% W / W 20Ggel , Silver Sulphadiazine Cream Usp 1% W / W 25Gm Cream , Sim Catheter 1, 2 , Single Handed Scalpel Blade Removal. , Single Lumen Catheter Full Set With Rolleson Syringe. , Single Lumen -Cvc , Single Lumen Cvc 22G, 10Cm , Single Lumen Cvc 24G, 20 Cm , Single Lumen --Cvc Arrow , Single Stage Straightvenous Cannula Plastic Multi Port Tips , One Piece, Sizes - 10, 12, 14, 16, 18, 20, 22, 24, 28, 30 , Single Stage Straightvenous Cannula Malleableplastic Multi Port Tips And Malleable, One Piece, Sizes - 18, 20, 22, 24, 28, 30 , Single Stage Straightvenous Cannula Malleableplastic Multi Port Tips And Malleable, One Piece, Sizes - 18, 20, 22, 24, 28, 30, 32 Fr , Single Stage Venous Cannulae Straight Plastic Multi Port Tipsone Piece, Sizes - 10, 12, 14, 16, 18, 20, 22, 24, 28, 30, 32Fr , Single Stage Venous Cannulae With Right Angle Metal Tip Beveled Metal , Multi Port Tips Connectionsite 3 / 8 Inch, Sizes-10, 12, 14, 16, 18, 20, 22, 24 , Single Stage Venous Cannulae With Right Angle Metal Tip Beveled Metal , Multi Port Tips Connectionsite 3 / 8 Inch, Sizes-10, 12, 14, 16, 18, 20, 22, 24Fr , Single Use Portable Negative Pressure Wound Therapy System With A Small Portable Sterile Pump Maintaining A Pressure Of 80Mm Of Hg ( Nominal ) + / - 20Mm Of Hg Size 1 , Sion Blue , Skin Marker And Scale Set Of 1 , Sleeve Of Optically Guided 12Mm Bladeless Trocarwith Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal100mm Length. , Sleeve Of Optically Guided 5Mm Bladeless Trocarwith Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal100mm Length. , Sleeves Should Have Three Different Chambers With Different Pressure At Each Chamber, Should Have Passive Cooling Facility In Sleeves For Better Patient Comfort, Should Comply Ingress Protection Ip23 ( Iec 529 ) , Should Comply All Of Safety Standard, , Small Bore Y Extension Set With 2 Lad & Spin Lock Connector. Latex Free With No Metal Components. , Small Size ( 10X7.5X3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Small Size ( 2.6 X 3.4Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Small Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Small Wide Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Snare 5, 10, 25Mm , Snp ( Nitroprusside ) 50 Mg / 2Ml Vial Injection , Snugger Setall Sizes: Three Pairs Of Smooth Snuggers With Yellow, Blue &Pinkcolors For Vessel Identification. , Snugger Set All Sizes: Three Pairs Of Smooth Snuggers With Yellow, Blue &Pinkcolors For Vessel Identification. , Soda Lime For Anaesthesia Work Station ( Disposable, Carbon Dioxide Absorbent Medisorb Twin Pack, 4.5 Kg. ( 9.9 Lb ) White To Violet ) Inj. , Sodabicarb 1000 Mg Tablets , Sodabicarb 500 Mg Tablets , Sodalime Absorber Cannister , Sodium Bicarbonate 8.4% W / V25 Ml Ampoule Injection , Sodium Bycarb Glycerine Drops 8% 10Mleye Drop , Sodium Flourosceininjection3ml , Sodium Fusidate 0.02 Ointment , Sodium Hyaluronate For The Treatment Of Degenerative Joints Disease, Pre-Filled Syringe:25Mg / 2.5 Ml Pfs - 2.5 Ml / Pfs Inj. , Sodium Hypochlorite 10 %5 Lit. Solution , Sodium Hypochlorite 5% Solution 5Ltrcan , Sodium Nitroprusside 50 Mginj. , Sodium Pantolate Vials Inj. , Sodium Phosphate Enema B.P. ( Proctolysis Enema ) 18Gm / 100Ml 100Ml-Plastic Enema , Sodium Thiopentone0.5Gm Powder / Vial 20Ml Vialinj. , Sodium Valproate 100Mg. Inj. , Sodium Valproate 200Mg. Inj. , Sodium Valproate Sr-200Mg. Tab. , Sodium Valproate Sr-300Mg. Tab. , Sodium Valproate Sr-500Mg. Tab. , Soft Collar S / M / L , Soft Roll 6 . , Soluble Insulinip, Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Solution Contains 40 Iu ( 10Ml Vial ) Inj. , Sorafenib 200Mg, Tablet , Sorbiline 200Ml Syp. , Soya Isoflavone 100 Mg + Calcium Citrate 500 Mg + Zinc 15 Mg + Cromium With Vitamins Tab. , Spangestrongel Ointment , Speaking Valves , Specification Forpaeditric Oxygenator Priming Volume Maximum Should Be Less Than 105Ml.Minimum Operating Volume Approx. 30 Ml O Maximum Blood Flow Rate Should Be 2.8.Ltrs / Min. O Oxygen Transfer Should Not Be Less Than 250Ml / Min.O Pressure Drop Should Be Least-Up To 100Mmhg Or Less.O Heat Exchange Efficiency Should Not Be Less Than 0.65. Surface Area Of The Fibers Should Be Approx0.8 To 1.0M2 . O Heat Exchanger Fibre Material Shouldbe Made Of Polyurethane [ Tpu ] And Surface Area Should Be Approx. 0.13M2 To 0.15M2 . Blood Inlet Port 3 / 8 Blood Outlet Port 1 / 4 Cardioplegia Port 1 / 4 Gas Inlet Port 1 / 4 Gas Outlet Port 1 / 4Water Port 1 / 2 Maximum Pressure Blood Inlet 1000Mmhg, Water Inlet 42 Psi O Blood Storage Capacity Of Hard Shell Reservoir Should Be Max 3000Ml.O Minimum Operative Volume Of Hard Shell Reservoir Should Be 100Ml. , Specification Forsmall Adult Oxygenator Recommended Blood Flow Rating 0.5 - 5 L / Min Priming Volume Upto 140 Ml. Effective Gas Exchange Surface Area1.3 M² Effective Heat Exchange Surface Area0.3 M².Material Of Gas Exchange Fiberpolypropylene ( Pp ) Material Of Heat Exchange Fiber Polyurethane ( Tpu ) Max. Volume Capacity4.2 L Maximum Blood Flow Rates:- Venous Filter 7 L / Min- Cardiotomy Filter 5 L / Min- Combined 7 L / Min Minimum Operating Volume:- At Small Adult Blood Flow Rate Of 5 L / Min 150 Ml Cardiotomy Filter Pore Size 40 ?M Venous Filter Pore Size 68 ?Mmaterial Of Defoamerpolyurethane ( Pu ) Material Of Filterpolyester ( Pet ) , Polypropylene ( Pp ] , Specification For Adult Hemoconcentrator The Priming Volume Should Be 70 Ml O Effective Surface Area Of The Fibers Should Be ?1M 2 . O Blood Port Should Be ¼ With Luer Locks O Filtrate Port Should Be ½ ( 1 / 4Adapter ) . O Blood Flow , Specification For Adult Oxygenatorpriming Volume Should Be Less Than 300 Ml, Blood Flow Range Should Be 0 To 6 Liters / Min, Oxygen Transfer Should Be 400Ml / Min, Heat Exchange Efficiency Should Not Be Less Than 0.50, Housing Material Should Be Of Polycarbonate, Effective Gas Exchange Surface Area Of The Fibers Should Be From 1.2 To 2.4M2 , Gas Exchange Fibre Material Shud Be Polypropylene [ P P ] , Heat Exchanger Fibre Should Be Made Ofpolyurethane [ Tpu ] And Surface Area Should Be Approx. 0.2 To 0 .3 M2, Blood Inlet Port ( From Pump ) 3 / 8, Blood Outlet Port 3 / 8 , Cardioplegia Port 1 / 4, Gas Inlet Port1 / 4, Gas Outlet Port 1 / 4 , Water Port 1 / 2, Maximum Pressure Blood Inlet 1000 Mmhg And Water Inlet 42 Psi , Blood Storage Capacity Of Hard Shellreservoir Should Be 4000-5000Ml Minimum Operating Volume Of Reservoir Should Be 200Ml. , Specification For Adult Oxygenator O Priming Volume Should Be Less Than 190 Ml. O Blood Flow Range Should Be 0-6 Lts / Min.O Oxygen Transfer Should Be Atleast 400Ml / Min.O Heat Exchange Efficiency Should Not Be Less Than 0.50.O Housing Material Should Be Of Polycarbonate. O Effective Gas Exchange Surface Area Of The Fibers Should Be From 1.2 To 2.4M2 Gas Exchange Fibre Material Shud Bepolypropylene [ P P ] O Heat Exchanger Fibre Should Be Made Ofolyurethane [ Tpu ] And Surface Area Should Be Approx. 0.2 To 0 .3 M2 Blood Inlet Port ( From Pump ) 3 / 8 Blood Outlet Port 3 / 8 Cardioplegia Port 1 / 4 Gasinlet Port 1 / 4 Gas Outlet Port 1 / 4 Water Ports ½ Maximum Pressure Blood Inlet 1000 Mmhg Water Inlet 42 Psi O Blood Storage Capacity Of Hard Shell Reservoir Should Be Approx. 4000-5000Mlo Minimum Operating Volume Of Reservoir Should Be 200Ml. , Specification For Pedaitric Hemoconcentrator It Should Have Priming Volume Approx 35Ml. O Effective Surfacearea Of The Fibers Should Be Approx 0.5M 2 . O Blood Port Should Be ¼With Luer Locks. O Filtrate Port Should Be ½. Omaximum Trans-Membrane Pressure Should Be 500Mm Hg. O It Should Have Tubing Lines Along With Reservoir Bag.Should Be ¼With Luer Locks. O Filtrate Port Should Be ½. Opressure Should Not Be More Than 500Mm Hg. O It Should Have Tubing With Reservoir Bag. , Specification For Small Adult Oxygenatorrecommended Blood Flow Rating 0.5 To 5 L / Min, Priming Volume 175 Ml Effective Gas Exchange Surface Area 1.3 M² , Effective Heat Exchange Surface Area 0.3 M², Material Of Gas Exchange Fibershould Bepolypropylene ( Pp ) , Material Of Heat Exchange Fiber Should Be Polyurethane ( Tpu ) , Maximum Volume Capacity 4.2 Litres Maximum Blood Flow Rates:- Venous Filter- 7 L / Min, Cardiotomy Filter- 5L / Min, Minimum Operating Volume:150 Ml, Cardiotomy Filter Pore Size 40 ?M, Venous Filter Pore Size 68 ?M, Material Of Defoamer Should Be Polyurethane ( Pu ) , Material Of Filter Should Be Polyester ( Pet ) / Polypropylene ( Pp ] , Material Of Housing Should Be Polycarbonate ( Pc ) , Specifications For Cardioplegia Heat Exchanger ( Bcd ) It Should Have Priming Volume Less Than 50 Ml, Blood Flow Rate Should Be Between 0 To 600 Ml / Min, Filter Pore Should Be Around 100 Um, Inlet Connection Should Be 1 / 4 , Outlet Connection Should Be 3 / 16. Heat Exchange Surface Area Should Be ?.20M 2, Heat Exchange Should Be Of Stainless Steelcorrugated / Convoluted Pipes. Bubble Trap Should Be Integrated For Highly Efficient Debubbling, Exchangeable Water In / Water Out Blood Flow Path Bottom Up It Should Have A Stopcockprime / Perfusion For Easypriming. It Should Have Tip In The Surgeon Pack So That It Can Beconnected To Cardioplegia Cannula. It Should Be Available Both In 4:1 And 1:4 Configurations. , Spercutaneous Surgical With Minilapsystem- A Manual Instruments For Direct Introduction To Surgical Site Without Need For Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A- Alligator Thumb Grip Graspers ( 2.3Mm ) B- Clutch Thumb Grip Graspers ( 2.3Mm ) C- Babcock Thumb Grip Graspers ( 2.3Mm ) D- Bowel Thumb Grip Graspers ( 2.3Mm ) , Spinal Needle.Ce Certified22 No. L-12Cm . , Spinal Needle.Ce Certified22 No. L-15Cm . , Spinal Needle.Ce Certified23 No. With Introducer And Metal Stylet . , Spinal Needle.Ce Certified26 No. . , Spinal Needle.Ce Certified27 No. L-120Mm . , Spinal Needle.Ce Certified28 No. . , Spinal Needle.Ce Certified29 No., L-120Mm. . , Spinal Needle. Ce Certified18 No. . , Spinal Needle. Ce Certified20 No. . , Spinal Needle. Ce Certified21 No. . , Spinal Needle. Ce Certified24 No. . , Spinal Needle. Iso, Ce Certified16 No. . , Spirally Coiled Pe Pmo Line All Sizes 150, 200, 300, 400 Cm , Spirally Coiled Pvc Pmo Line All Sizes 150, 200, 300, 400 Cm , Spironolactone ( 50 Mg ) + Torsemide ( 10 Mg ) Tab. , Srings 2Ml Leur Lock , Stainless Steel Dual Cuffed For Ventilation During Co2 And Ktp Laser Surgery Of The Laryngeal / Tracheal Area , Stand For Lead Aprons; S.S. Made With Wheels, With Minimum 6 Hangers , Steal Core Guide Wire0.035 Inch , Steam Inhaler , Steel Wire 1 X 45 Cm, 3 X 45 Cm, 6, 48Mm 1 / 2 Circle Cutting 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 2, 40Mm 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 4, 40Mm 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 5, 44Mm 1 / 2 Circle Blunt Point , Stent Delivery Microcathetermicrocatheter : Compatible With Flow Diverter Delivery, Id 0.027 , Stent Neurovascular Self Expandable Nitinol Fully Deplorable Partly Or Completely Retrievable With Radiopaque Markers 4.S Mm X14 - 16Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.S Mm X 14 — 16 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Should Be Dcgi Andusfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 19 - 20Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 19 - 20 Mm, Fully Deployable, Partlyor Completely Retrievabie, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 19 - 20Mmneurovascular Selfexpandablenitinolstentused For Stent Assisted Coiling, Of Size 3.5 Mm X 19 – 20 Mm, Fully Deployable, Partly Orcompletely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 24 - 25Mm Neurovascu |Ar Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 24 - 2S Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter. Should Be Dcgl And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 24 - 25Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 24 - 25 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X 34 - 38Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 34 — 38 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfdaapproved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X 34 - 38Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 34 – 38 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X14 - 16Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 14 – 16 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X22 - 24Mm Neurovascular Self Expandable Nitinolstent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 22 —24 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X22 - 24Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 22 – 24 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X28 - 30Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 28 – 30 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Raoiopaque Markers 4.5 Mm X28 - 30Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 28 — 30 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfda Approved , Stent Retriever Device Tigertriver , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X40 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 7Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 7 Mm X 30 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11- 15. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 7Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 7 Mm X 40 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stentj With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11— 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm H 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11— 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 40 Rum, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr. No 11 - 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 6Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 6 Mm X 30 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid‘ Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11- 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 6Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 6 Mm X 40Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11 Is. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotio Straight / Tapered 6Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 6 Mm X 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfoa Approved , Stent Self Expandable Nitinol Carotio Straight / Tapered 6Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 6 Mm X 40 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotio Straight / Tapereo 10Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Sterilant Cold Disinfectant For Dialysis Containing Peracetic , Sterilant Hot Disinfectant For Dialysis Containing21% , Sterile Absorbable Geltatin Sponge ( Porcine Origine ) , Size 80 X 50 X 10 Mm , Sterile Adhesive Post Op Dressing Large, Silver Impregnated Antibacterial Pu Hydrophilicfoam Dressing Size Should Be 05Cm X 25 Cm And Transparent Adhesive Pu Drape Size 10Cmx30cm , Sterile Adhesive Post Op Dressing Small, Silver Impregnated Antibacterial Pu Hydrophilic Foam Dressing Size Should Be 05Cm X 10 Cm And Transparent Adhesive Pu Drape Size 10Cmx15cm , Sterile Collagen Sheet In Dry Form, Size 10 Cm X 20 Cm , Sterile Collagen Sheet In Dry Form, Size 15 Cm X 30 Cm , Sterile Collagen Sheet In Dry Form, Size 20 Cm X 40 Cm , Sterile Collagen Sponge 10X10cm . , Sterile Collagen Sponge 5X5cm . , Sterile Disposable Large Dressing Pack Tray With Galipot, Cotton Balls, Disposable Dressing Forceps, Dressing Pad, Gauze Swabs, Gloves, Sterile Field, Hand Wipe Tissue, Bandage Roll And Disposal Bag , Sterile Disposable Medium Dressing Pack Tray With Galipot, Gauze Swabs, Dressingpad, Dressing Forceps, Cotton Balls, Hand Wipe Tissue, Disposal Bag And Gloves , Sterile Drum / Container20 Litre , Sterile Gauze Swabs 10X10cm 12 Ply With X-Ray Thread Pack Of 10 , Sterile Haemocoagulase Solution10mleye Drop , Sterile Medicated Collagen Particles10ml ( Approved By Dcgi ) . , Sterile Medicated Collagen Particles, 10 Ml , Sterile Medicated Collagen Sheet In Dry Form 10X10 . , Sterile Medicated Collagen Sheet In Dry Form 15X30 . , Sterile Native Collagen Sheets In Wet Formsize 10X10 . , Sterile Native Collagen Sheets In Wet Formsize 10X25 . , Sterile Native Collagen Sheets In Wet Formsize 15X30 . , Sterile Native Collagen Sheets In Wet Formsize 20X40 . , Sterile Powder Free Surgical Gloves Size - 6 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 6.5 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 7 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 7.5 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 8 ( Pair ) , Sterilized Polypropylene Mesh 10 Cm X 15 Cm , Sterilized Polypropylene Mesh 15 Cm X 15 Cm , Sterilized Polypropylene Mesh 30 Cm X 30 Cm , Sterilized Polypropylene Mesh 6 Cm X 11 Cm , Sterilized Polypropylene Mesh 7.6 Cm X 15 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 15 Cm X 15 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 35.6 Cm X 30 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 6.4 Cm X 11.4 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 7.6 Cm X 15 Cm , Sterlie Surgical Latex Gloves Beaded6, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 6.5, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 7, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 7½, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 8 Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 6, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 6.5, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 7, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 7½, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 8 Isi Mark . , Sternal Closure Implant Made Of Biocompatible Peek ( Polyetheretherketone ) Polymer With Consistent Tension Across Sternotomy Or Fracture Of The Sternum ( Pack Of 5 Bands ) , Stoma Bag Barrier Paste 60 Ml , Stone Basket : Flat Wire ( Stainless Steel ) , Stone Basket : Helical ( Stainless Steel ) , Stone Basket : Nitnol , Stone Basket Flexible , Straight Taper Point Surgical Suture Needles Size: 43Mm , Straight Taper Point Surgical Suture Needles Size: 64Mm , Streptomycin 0.75 Mginj. , Styllet -Adultsize , Styllet -Paediatricsize , Submicronic Eptfe, Anterior Side Is Monofilament Polypropylene Mesh, ( Bard Soft Mesh - Average Pore Size Of 2500-3000 Microns ) , Posterior Side Is 100% Submicronic Eptfe ( Sub Micronic Pore Structure < 1 Micron ) , Overlap Sub Micronic Eptfe Edges Protects The Edge Of Mesh From Visceral Attachment. Various Sizes , Sucral Fate 200 Ml Solution , Suctioncatheter ( Fr ) 10F , Suctioncatheter ( Fr ) 11F , Suctioncatheter ( Fr ) 12F, , Suctioncatheter ( Fr ) 14F, , Suctioncatheter ( Fr ) 16F , Suctioncatheter ( Fr ) 18F , Suctioncatheter ( Fr ) 6F, , Suctioncatheter ( Fr ) 8F , Suction Catheter ( Fr ) 6Fr , Suction Catheter ( Fr ) 8Fr , Sugamadex Vial 5Ml / 500Mg Injection , Sulfacetamide Eye Drops 20%10Mleye Drop , Sulfamethoxazole 100 Mg And Trimethoprim 20Mg Tab. , Sulfamethoxazole 400Mg And Trimethoprim 80Mginj. , Sulfamethoxazole 800Mg And Trimethoprim 160Mginj. , Sumag20g. Ointment , Sumag75g. Ointment , Sumag Oint. Spray , Sumitriptan 25Mg. Tab. , Suprapubic Catheter Set 16 Fr , Surface Disinfectant - 10 Minute Aldehyde Free Disinfectant Containing Potassium Mono Per Sulphate Powder 5Kg Packet , Surfacent5ml / Bovine With Natural Lavageinj. , Surfacent 2Ml / Bovine With Natural Lavageinj. , Surfacent 3Ml / Bovine With Natural Lavageinj. , Surgical Blade Size 11Pkt ( 100Pcs ) , Surgical Blade Size 15 Pkt ( 100Pcs ) . , Surgical Blade Size 22 Pkt ( 100Pcs ) , Surgical Blade Size 23 Pkt ( 100Pcs ) . , Surgical Blade Size 24 Pkt ( 100Pcs ) . , Surgical Blade Size 26 Pkt ( 100Pcs ) , Surgical Clipper- Cutting Height Should Be 0.21 Mm. Should Be Only Ixp-7 Waterproof-Rated Rechargebleclippers Fully- Ubmersible For Thorough Cleaning And Disinfection. Should Have Adeptar Usable In Wet Or / And Dry Clipping. 40 Degree Angled For Seamless Grip. Size- Neuro Clipper , Sensi Clipper , Surgical Cover Dressings Stich Bonded Hydrofiber Dresssings With 1.2% W / W Impregnated Ionic Silver With Sustained And On Demand Broad Spectrum Antimicrobial & Bactricidal Efficacy With High Exudate Management Capability And Self Adherent Waterproof Moist Wound Dressing Made Up Of Triple Hydrocolloid Elastomeric Polymer Matrixsize 9X10cm, 9X15cm, 9X25cm, 9X30 Cm, 9X35cm , Surgical Cover Dressings With Ionic Silver Stich Bonded Hydrofiber Dresssings With 1.2% W / W Impregnated Ionic Silver With Sustained On Demand Broad Spectrum Antimicrobial & Bactricidal Activity With High Exudate Management Capabilities Of Locking In Exudatesin Gelformand Self Adherent Waterpro Of Moistwound Dressing Made Upof Triple Hydrocolloidelastomeric Polymer Matrix Size 9X10cm, 9X15cm, 9X20 Cm, 9X25 Cm, 9X30cm, 9X35 Cm , Surgical Hand Wash, Didecyl Dimethyl Ammonium Chloride 1Gm., 1- Propanol 40Gm. Ph 6. 500Ml. Solution , Surgical Mini Drop 10X10 . , Surgical Pattie / Cottonoid Compressed Rayon Provides The Natural Softness, Absorbency And Pliability Of Cotton. Should Haverayon Fibers To Resist Shedding, Stretching Or Linting. X- Ray Detectable. Available In Sizes 3 X 3 ( 7.62Cm X 7.62Cm ) . , Surgical Pattie / Cottonoid Compressed Rayon Provides The Natural Softness, Absorbency And Pliability Of Cotton. Should Haverayon Fibers To Resist Shedding, Stretching Or Linting. X- Ray Detectable. Available In Sizes 1 X 1 ( 2.54Cm X 2.54Cm ) . , Surgical Skin Marker Pen With Scale , Surgical Sprit500ml Bottle , Surgical / Biopsy Gun- Jamshidi Bone Marrow Biopsy / Aspiration Needle Should Have Light Weight Handle With Bult-In Comfort Knob. Should Have Bevel Tip For Easy Coring Of Bone. Should Have Bevel Cannula Tip. Should Have Tapered Distal Cannula For Easy Recovery Of Sample. Should Be Us Fda Approved.8G*4, 11G*4, 11G*6, 13G*2, 13G*3.5 , Surgical / Drainge Catheter Kit- 15.5 Fr Silicone Catheter Witch Is Soft Flexible And Conforms To The Pleural Or Peritoneal Site Discomfort Comes With Polyester Cuff. Catheter Kit , Surgikit Drape Kit Contents: 3 X Surgeons Gowns ( Large ) , 6 X Hand Towels, 1 X Surgeons Cap, 2 X Nurses Hats, 1 X Patient Cap, 1 X Aperture Drape ( 160X210 Cm ) , 3 X Surface Drapes- Adhesive ( 60X80cm ) , 1 X Tegaderm Site Dressing, 3 X Hose Covers, 1 X Instrument Tray, 1 X Plast One Case Contains 6 Kits , Sustained Release Recombinant Human Growth Hormone 24Mg / Vial Inj. , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 0 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 0 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X35cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 2 / 0 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 2 / 0 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 3 / 0 2X75cm Black Braided Silk , Sutupak, 3-0, 3 X 45Cm , Sutupak; 1, 3 X 45Cm , Sutupak; 2-0, 3 X 45Cm , Suture 0 - Mersilksuture--- Cutting Needle , Suture 2-0 Silk Suture -- Cutting Needle , Suture Dyed Polyester Poly ( P-Dioxanone ) , 1, 36X36 Cm, 1 / 2 Circle Cutting 40Mm, 20 Anchors / Inch Biderctional Usfda Approved , Suture Free Securement Hydrocolloid Device For Picc Line Catheter . , Suture Free Securement Hydrocolloid Device For Umbilical Catheter . , Suture Needles Curved & 1 / 2 Circle Cutting All Size1 X 6 Needle , Swan Ganz Catheter , Switch Arterial Cannula --Bd 20 G , Synthetic Absorable Coated Poliglecaprone 25 With Irgacare Mp, 3 / 8 Circle Reverse Cutting Ps-1 Needle, 24Mm, 70Cm , Synthetic Absorable Coated Polyglactin 910 Usp Size 10 / 0 6.5Mm, 3 / 8 Circle Cs140-6 ( 150 Micron ) , 10Cms , Synthetic Absorable Coated Polyglactin 910 Usp Size 6 / 0 8Mm, 1 / 4 Micro Point Spatulated Da, 45Cms , Synthetic Absorable Coated Polyglactin 910 Usp Size 8 / 0 6Mm, 3 / 8 Micro Point Spatulated Da, 30Cms , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 0 90Cm Violet 40Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 1 90Cm Violet 40Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 2-0 75Cm Violet 26-30Mm 1 / 2 Circle Taper Point / Taper Cut ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 3-0 70-75Cm Violet 20-22Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2228 Size : 2, 1 / 2 Circle R B, 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2228Vs Size : 2, 1 / 2 Circle R B, 45Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2303 Size : 5-0, 1 / 2 Circle R B, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2304 Size : 4-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2304Vs Size : 4-0, 1 / 2 Circle Rb 20Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2305 Size : 4-0, 1 / 2 Circle R B, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2306 Size : 4-0, 3 / 8 Circle Cutting 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317 Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317Da Size : 2-0, 1 / 2 Circle R B & 1 / 2 Circle T C Da, 30Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317T Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2319 Size : 1, 1 / 2 Circle T C , Ob Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2338 Size : 0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2341 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2342 Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2343 Size : 1, 1 / 2 Circle R B Heavy, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2344 Size : 0, 1 / 2 Circle R B Heavy, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2345 Size : 2-0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346 Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346A Size : 0, 1 / 2 Circle R B, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Aa Size : 0, 1 / 2 Circle R B, 40Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Da Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Da / 180 Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Dat Size : 0, 1 / 2 Circle R B & 1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346T Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Vs Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Vst Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347A Size : 1, 1 / 2 Circle R Bheavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Aa Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da Size : 1, 1 / 2 Circle R B Heavy 1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 160 Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 160Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180 Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180N Size : 1, 1 / 2 Circle Rb Heavy 50Mm, Da, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180Rb Size : 1, 1 / 2 Circle Rb 40Mm, Da, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180T Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Dat Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Dat-N Size : 1, 1 / 2 Circle Taper Cutting 40Mm, Da, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347T Size : 1, 1 / 2 Circle R B.Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Vs Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Vst Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2350 Size : 1, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2359 Size : 1, 1 / 2 Circle R Bheavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2361 Size : 0, 1 / 2 Circle T C Heavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2362 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2363 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2364 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2364Vs Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2382 Size : 2-0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2382A Size : 2-0, 1 / 2 Circle Rc 40Mm, 45Cms 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2401 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2407 Size : 3-0, 3 / 8 Circle R C ( Undyed ) , 26Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421 Size : 1, 1 / 2 Circle R C Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421A Size : 1, 1 / 2 Circle Rc 40Mm, Or Needle, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421Da-Or Size : 1, 1 / 2 Circle R B & 1 / 2 Circle R C Or Needle, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421T Size : 1, 1 / 2 Circle Rc 40Mm, Or Needle, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2422 Size : 0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2437 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2437Dasize : 3-0, 3 / 8 Circle Rb 22Mm, Da, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2438 Size : 1, 1 / 2 Circle R C Heavy, 50Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2442 Size : 5-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2448 Size : 1, 1 / 2 Circle R B Heavy, 50Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2465 Size : 4-0, 5 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2471 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2472 Size : 3-0, 1 / 2 Circle Cutting, 22Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2473 Size : 2-0, 5 / 8 Circle R B, 27Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2473Ldl Size : 2-0, 5 / 8 Circle Rb 27Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2478 Size : 2, 1 / 2 Circle Rc 40Mm, Or Needle, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2493 Size : 5-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2494 Size : 4-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2495 Size : 3-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511 Size : 2-0, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511A Size : 2-0, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511Aa Size : 2-0, 1 / 2 Circle T C, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511A-N Size : 2-0, 3 / 8 Circle Rc 45Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2512 Size : 0, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2512A Size : 0, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513 Size : 1, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513A Size : 1, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513Aa Size : 1, 1 / 2 Circle T C, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2515 Size : 3-0, 1 / 2 Circle T C, 17Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2516 Size : 3-0, 1 / 2 Circle T C, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2517 Size : 2-0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2517N Size : 2-0, 3 / 8 Circle Rc 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518 Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518N Size : 0, 1 / 2 Circle Tc 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518T Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518Vs Size : 0, 1 / 2 Circle T C, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518Vst Size : 0, 1 / 2 Circle T C, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2534 Size : 0, 1 / 2 Circle R C Or Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2546 Size : 0, 1 / 2 Circle R B, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2825A Size : 0, 1 / 2 Circle R C, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2826 Size : 1, 1 / 2 Circle R C, 23Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2826A Size : 1, 1 / 2 Circle R C, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2944 Size : 4-0, 3 / 8 Circle R C, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 945 Size : 2-0, 1 / 2 Circle R B Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 946 Size : 0, 1 / 2 Circle R B Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9132 Size : 3-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9133 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9201H Size : 5-0, 1 / 2 Circle R B ( Da ) , 13Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9210 Size : 1-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9221 Size : 1, 1 / 2 Circle Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9233 Size : 1-0, 1 / 2 Circle R B, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9234 Size : 1, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9235Sa Size : 1, 1 / 2 Circle T C, 30Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9237 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9248 Size : 1, 1 / 2 Circle R B, 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9261 Size : 1-0, 1 / 2 Circle R B ( Heavy ) , 50Mm, 150Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9262 Size : 1 Loop, 1 / 2 Circle R B ( Heavy ) , 50Mm, 150Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9304 Size : 4-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9352 Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9371 Size : 1-0, 1 / 2 Circle R B ( Heavy ) , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2160da / 160 Size : 1, 1 / 2 Circle Taper Cut Da , 3 / 8 Circle Rb , 40, 50Mm, 160Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2304 Size : 4-0, 1 / 2 Circle Rb , 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2304sp Size : 4-0, Straight Tp, 19Mm, 75Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317 Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317da Size : 2-0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 30Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317t Size : 2-0, 1 / 2 Circle Rb, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2338 Size : 0, 1 / 2 Circle Rb, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2340 Size : 3-0, 1 / 2 Circle Rb, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2345 Size : 2-0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346 Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346da Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346t Size : 0, 1 / 2 Circle Rb, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346vs Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180 Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180N Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 50, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180-Nn Size : 1, 1 / 2 Circle Rb Heavy, 1 / 2 Circle Tc Heavy Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180T Size : 1, 1 / 2 Circle Rb & 1 / 2 Circle Tc Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347n Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 115Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347t Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347vs Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347vss Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 125Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2350 Size : 1, 1 / 2 Circle Rb, 36Mm, 120Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2360 Size : 1, 1 / 2 Circle Rb, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2363 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2382 Size : 2-0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2401 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2404 Size : 2-0, 3 / 8 Circle Cutting, 26Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2421 Size : 1, 1 / 2 Circle R C Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2421t Size: 1, 1 / 2 Circle Rc Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2437 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2437a Size : 3-0, 1 / 2 Circle Rb, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2438 Size : 1, 1 / 2 Circle Rc , 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2438 Size : 1, 1 / 2 Circle Rc Heavy, 50Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2448 Size : 1, 1 / 2 Circle R B, 50Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2471 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2472 Size : 3-0, 1 / 2 Circle Cutting ( Undyed ) , 22Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2473n Size : 2-0, 5 / 8 Circle Rb, 27Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2494 Size : 4-0, 3 / 8 Circle Rc, 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2516 Size : 3-0, 1 / 2 Circle T C , 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2517ob Size : 0, 1 / 2 Circle Tc, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2518 Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2518da / 180 Size : 0, 1 / 2 Circle Tc, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2519 Size : 1, 1 / 2 Circle T C , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2534 Size : 0, 1 / 2 Circle R C Or Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2825 Size : 0, 1 / 2 Circle Rc, 23Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2826 Size : 1, 1 / 2 Circle Rc, 23Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2826a Size : 1, 1 / 2 Circle Rc, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2944 Size : 4-0, 3 / 8 Circle Rc, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures945 Size : 2-0, 1 / 2 Circle Rb, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures946 Size : 0, 1 / 2 Circle Rb ( Undyed ) , 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures947 Size : 1, 1 / 2 Circle Tp Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size - 0, 30Mm, 1 / 2 Circle Round Body, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 30Mm, 1 / 2 Circle Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 40Mm, 1 / 2 Circle Taper Cut, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 36Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Heavy Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Heavy Round Body, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Taper Cut, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size -1, 23Mm, 1 / 2 Circle Heavy Rc, 35Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 40Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 40Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Rb, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Rb, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Round Body, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Prime Cutting Ps-1, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Prime Cutting Ps-1, 70Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Rc Ps-1, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Rc Ps-1, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Primecutting, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Primecutting, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 36Mm, 1 / 2 Circle Taper Cut, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 36Mm, 1 / 2 Circle Taper Cut, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 4 / 0 20Mm, 1 / 2 Circle Rb, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 4 / 0 20Mm, 1 / 2 Circle Rb, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 36Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-1, 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Casting ( Fiberglass Casting ) 3 . , Synthetic Casting ( Fiberglass Casting ) 4 . , Synthetic Casting ( Fiberglass Casting ) 5 . , Synthetic Fast Absorbable Surgical Suture U.S.P.2516Rb Fast Size : 3-0, 1 / 2 Circle Rb, 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2718 F Size: 4-0, 3 / 8 Circle Rc Cirkum, 16Mm, 45Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2718Rb F Size: 4-0, 3 / 8 Circle Rb Cirkum, 16Mm, 45Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2732 Fast Size : 3-0, 3 / 8 Circle Rc, 26Mm, 75Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2760 Fast Size : 2-0, 3 / 8 Circle Rc, 26Mm, 75Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2761 Fast Size : 2-0, 1 / 2 Circle Rb, 38Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762 Fast Size : 2-0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762 Fs Size : 2-0, 1 / 2 Circle Tc Epicio, 35Mm, 100Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762Dy F Size : 2-0, 1 / 2 Circle Cutting Da, 30Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762F Vs Size : 2-0, 1 / 2 Circle Rb , 35Mm, 110Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2763 Fast Size : 0, 1 / 2 Circle Tc, 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2763 Fs Size : 0, 1 / 2 Circle Tc, 35Mm, 100Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2777 Fast Size: 2-0, 1 / 2 Circle Rc & 1 / 2 Circle Rb Da, 36Mm, 140Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2739 Fast Size : 3-0, 1 / 2 Circle Rb, 30Mm, 70Cm 1 Foils , Synthetic Nonabsorbable Surgical Suturewith Controlled Linear Elongation Process & Plastic Knot Deformitypolypropylene 3-0, 26Mm, 1 / 2 Circle Round Body Taper Point Sh, Ethalloy, Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity Polypropylene 3-0, 17Mm, 1 / 2 Circle Round Body Rb-1, Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 17Mm, 1 / 2 Circle Round Body Rb-1, Blue Monofilament Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 26Mm, 1 / 2 Circle Taper Point Sh, Ethalloy, Double Needle Blue Monofilament, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 6-0 , Tungsten-Rhenium’S Needle, 13Mm , 3 / 8 Circle, Tp, C-1 Double Needle, ( Blue 60Cm ) , , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 13Mm, 1 / 2 Circle Round Body Cc-4 Hemo-Seal Multipass, Double Needle, 75Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 5-0, 13 Mm, 3 / 8 Circle Cc -1 ( 320 Microns ) , Double Needle, 75Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 5-0, 9.3Mm, 3 / 8 Circle Cc Hemo-Seal Multipass, Double Needle, 60Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 6-0, 3 / 8 Circle Round Body, Visi-Black C-1, Ethalloy Needle, 13.0 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0 , Tungsten-Rhenium’S Needle 9.3Mm, 3 / 8 Circle, Bv 175-8 Cc Tp, Double Needle ( Blue 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0, 3 / 8 Circle Round Body, Visi-Black Bv-1, Ethalloy, 9.3 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0, Tungsten-Rhenium’S Needle, 8.0Mm, 3 / 8 Circle Tp, Bv, 175-6, Double Needle ( Blue 60 Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 8-0, 3 / 8 Circle Visi-Black Cc-175-6, 8.0 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 8-0, Tungsten-Rhenium’S Needle, 8.0 Mm, 3 / 8 Circle Tp, Bv, 175-6 Double Needle ( Blue 60Cm ) , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 4 No., ½ Circle Cutting Ccs, 48Mm, Length 4X45cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 5 No., ½ Circle Round Body Blunt Point, 44Mm, Length 75Cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 6 No., ½ Circle Round Body Blunt Point, 44Mm, Length 75Cm , Synthetic Nonabsorbable Surgical Suture, Nonabsorbable Polybutylate Coated, Polyester 5, No. 1 / 2 Circle Tapercut V-55, 55Mm, Green Braided, 75Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 17Mm, 1 / 2 Circle Taper Cut 2X V-5 Double Needle Green Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 17Mm, 1 / 2 Circle Taper Cut V-5 Double Needle White Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 26Mm, 1 / 2 Circle Taper Cut 2X V-7 Double Needle White Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 1 No., 1 / 2 Circle Taper Cut V-37, 40Mm, 4X 45Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 7 No., 1 / 2 Circle Cutting Ccs, 48Mm, 4X 45Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 6 No., 1 / 2 Circle 3- Needles Round Body 1 Conventional Cutting ( Ccs ) Blunt Point, 48Mm, Length 45Cm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 17Mm , 2-0, Green Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 17Mm , 2-0, White Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 26Mm , 2-0, Green Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 26Mm , 2-0, White Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 2-0, 26Mm, 1 / 2 Circle Tapercut V-5 Double Needle, 75 Cm Multistrand 5 Green & 5 White Strands In A Foil Ptfe Polymer Pledget 3Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 2-0, 17Mm, 1 / 2 Circle Tapercut V-5 Double Needle, 75 Cm Multistrand 5 Green & 5 White Strands In A Foil Ptfe Polymer Pledget 3Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 44.8 Mm Green 1 / 2 Circle Tapercut V-39 , 26Mm , 2 No., 75 Cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 2 No., ½ Circle Round Body Blunt Point, 40Mm, Length 45Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 26Mm, 1 / 2 Circle Taper Cut 2X V-7 Double Needle Green Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated, Braided Polyester, 2-0 , 17Mm, 1 / 2 Circle Taper Cut Sx Double Needle, 5-Green, 5-White Sutures, 75Cm With Pledgets ( 6X3x1.5 ) Mm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated, Braided Polyester, 2-0 , 26Mm, 1 / 2 Circle Tapercut Sx Double Needle, 5-Green, 5-White Sutures, 75Cm With Pledgets ( 6X3x1.5 ) Mm , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 1, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 2-0, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 3-0, 3 / 8 Circle Cutting Ps1 Prime, Multi Pass Ethalloy, 24Mm, 70Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Triclosan Coated, Undyed 1-0, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polypropylene 5-0, 17 Mm, 3 / 8 Circle Round Body Sh Double Needle , 90Cm , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732 Fast Size : 3-0, 3 / 8 Circle R C , 26Mm, 75Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732 / 70 Size : 3-0, 3 / 8 Circle R C , 26Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732A Fast Size : 3-0, 3 / 8 Circle R C , 26Mm, 45Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2735A Fast Size : 3-0, 1 / 2 Circle Cutting , 22Mm, 45Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762 Fast Size : 2-0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762A Eco Size : 2-0, 1 / 2 Circle T C , 35Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762F Vs Size : 2-0, 1 / 2 Circle T C, 35Mm, 110Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2763 Fast Size : 0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2763A Eco Size : 0, 1 / 2 Circle T C , 35Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2777 Fast Size : 2-0, 1 / 2 Circle R B &1 / 2 Circle Rcda, 36Mm, 140Cm 1 Foils , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 0 35Mm, 3 / 8 Circle Rc, 60Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 0 36.4Mm, 1 / 2 Circle Tc, 90Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 35Mm, 1 / 2 Circle Tc, 90Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 36Mm, 1 / 2 Circle Rc & 1 / 2 Circle Rb, 140Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 36Mm, 3 / 8 Circle Rc, 60Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 16Mm, 3 / 8 Circle Cutting, 45Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting Pc-3, 75Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 22Mm, 1 / 2 Circle Cutting, 70Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 75Cms , Syringe 1Ml For Inflatin And Deflation Occulaion Balloon System Cadence Precision Injector Syringe 1Mi. For Inflation & Deflation Of Occlusion Balioon System. Should Be Compatable With Item Of Sr. No 46 -50.Should Be Dcgi And Usfda Approved , Syringe 1Ml For Inflatin And Deflation Occulaion Balloon Systemcadence Precision Injector Syringe 1Ml. For Inflation & Deflation Of Occlusion Balloon System. Should Be Dcgi And Usfdaapproved , Syringes With Luer Lock 10Ml , Syringes With Luer Lock 20Ml , Syringes With Luer Lock 50Ml , Syringes With Luer Lock 5Ml, , Syringes Without Luer Lock 10Ml With 21 G Needle , Syringes Without Luer Lock 2 Ml With 24 G Needle , Syringes Without Luer Lock 5Mlwith 21 G Needle , T- Piece With Oxygen Tubing . , Tab. Dabigatran Etexilate ( 110Mg ) , Tab. Dabigatran Etexilate ( 150Mg ) , Tab. Rivaroxaban ( 10Mg ) , Tab. Rivaroxaban ( 20Mg ) , Tacrolimus 0.0003 Ointment , Tamsulosin ( 0.4Mg ) + Dutasteride ( 0.5Mg ) Tab. , Tamsulosin ( 0.4Mg ) + Finasteride ( 5Mg ) Tab. , Tannic Acid ( With Glycerine ) Gum Paint 20% 15 Ml Vial. Solution , Taxes Micro Guide Catheter , Taxes Microguide Wire , Taylor Brace ( Regular ) S / M / L , Technology, Third Generation Npwt System Pu Foam Size 15 X26 X3.3Cm And Absorbent Cotton Gauze Swabs, Transparent Pu Drape, Disposable Scalpel And Gloves , Technology, Third Generation Npwt System, Pu Foam Size 12.5 X18 X3.3Cm And Absorbent Cotton Gauze Swabs, Transparent Pu Drape, Disposable Scalpel And Gloves , Teflon Pledgets 1 / 4, 1 / 8, 1 / 6 , Teflon Wire J Tip .025X150 & 260Cm , Tegaderm ( 8.5X10.5Cm ) , Tegaderm ( 8.5X10.5Cm ) Pack Of 50 , Telmisartan 20 Mg + Amlodipine 2.5 Mg + Hydrochlorothiazide ( Hctz ) 6.25 Mg Tab. , Temporary Pacemaker Dual Chamber , Temporary Pacing Wire 60Mm, Electrode Blu 60Cm, 17Mm 1 / 2 Circle Tapercut & 60Mm Straight , Temporary Pacing Wire 90Mm, Electrode Blu 60Cm, 26Mm 1 / 2 Circle Tapercut & 60Mm Straight , Tenceteplace 50Mg.Inj. , Tenecteplase 30Mg. Inj. , Tenecteplase 40Mg. Inj. , Tension Free Viganal Tape 1.1Cm X 8Cm Soft Polypropylene Mesh , Tension Free Viganal Tape 10Cm Wide X 45Cm Length With 2 Helical Passer For Inside Out , Tension Free Viganal Tape Medurethral Approach, Sling Of 1.1Cm X 8Cm Soft Polypropylene , Terbinafine 200Mg. Tab. , Terbinafine Hydrochloride 0.01 Ointment , Terbutaline Sulphate 2.5Mg Tab. , Teriparatide 250 Mcg / Ml 3Ml Vail Inj. , Terrumo Progreat Microcatheter 0.024 Inch , Terumo Guide Wire 0. 035 X 150 Cm J , Terumo Guide Wire 0. 035 X 260 Cm J , Terumo Guide Wire 0. 035 X 260 Cmst Tip , Testosterone Undecanoate 40 Mg Cap. , Tetanous Immuglobulin Human 1000Iu Inj. , Tetanus Immunoglobulin Usp 250 Iu / Vial Inj. , Tetanus Immunoglobulin Usp 500 Iu / Vialinj. , Tetanus Toxide0.5Ml Ampouleinj. , Tetra Starch 6%Ffs Bottle 500 Ml Iv , Tetrabenazine 25Mg. Tab. , Tetracycline 250Mg. Cap. , Thalidomide Cap. , The Codman Scalp Clip Applier Is A Sterile, Single-Use System Designed To Apply Scalp Clips To The Scalp Flap. Comes With Pre-Loaded Scalp Clips, Permits Rapid Application Of Scalp Clips, Provides Adequate Hemostasis. . , The Deviseshould Be Classified With Respect To Electrical Shock, Fire And Mechanical Hazards In Accordance With: Ul60601-1, Es60601-1:2005 And Standards Classified With Can / Csa C22.2No.60601-1:08 , Theophyline 25.3 Mg 3 Ml Inj. , Therapy System With Pressure Setting 05Cmx25cm Pu Foam, 45Ml Canister, 3 Layer Drape And Silicon Dressing , Thermosensitive Endotracheal Tube - The Usfda Approved Endotracheal Tube Made Of Ruschelit™ Pvc Technology With Right Degree Of Stiffness I.E. Thermosensitive, Flexibility, And Kink Resistance. Comply With Astm Standard Requirements And Are Marked Withf29 Notation. Tubes Feature An Outstanding I.D. To O.D. Ratio. Available In A Full Range Of Paediatric And Adult Sizes Starting From 2.5Mm In Cuffed & 2Mm In Uncuffed. No Latex Contents. , Thiocolchicoside 4 Mg+Aceclofenac 100 Mg Tab. , Thiocolchicoside 8 Mg+Aceclofenac 100 Mg Tab. , Thiopentonesodium ( 500 Gm ) -- Vial Injection , Thoracic Cathetermade Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Size - 24 , Thoracic Cathetermade Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes -28, 32 , Thoracic Catheter Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Size - 24 , Thoracic Catheter Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracicdrainage. Sizes -28, 32 , Thoracic Catheterright Angle ( 90° ) Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes: 24, 28, 32 , Thoracic Catheterright Angle ( 90° ) Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes: 24, 28, 32 , Thoracic Drinage Sets , Three Way Stop Cock . , Threeway Stop Cockwith Leur Lock , Thrombophob Ointment , Thrombus Cutter Catheter , Thymoblobulin Rabbit 25 Gm , Thymocyte Globulin Inj. , Thyroxine Sodium 0.25 Mg Tab , Tianeptine Sodium 12.5 Mg Tab. , Ticagrelor 60Mg. Tab. , Ticagrelor 90Mgtablets , Timolol Moleate - 5Ml 0.25% Eye Drop , Tinidazole300 Mg Tab. , Tinidazole500mg Tab. , Tinidazole Powder For Susp 150Mg / 5Mlsyp. , Tirfiban 5 Mg / 100 Ml Inj. , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 10X15 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 15X15 Square , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 15X20 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 20X25 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 7.5X15 Rectangle , Tissue Stabilizer For Beating Heartshould Be A Low Profile Tissuestabilizer With Auto Spreadfeature Of Pods. , Tissue Stabilizer For Beating Heart Should Be A Low Profile Tissuestabilizer With Auto Spreadfeature Of Pods. , Titanium Clip Applier For Large Size Titanium Clip ( 6.2X12.5Mm ) , 26.7 Cm Long For Open Surgery , Titanium Clip Applier For Medium Size Titanium Clip ( 3.2X5.2Mm ) , 19.0 Cm Long For Open Surgery , Titanium Clip Applier For Medium / Large Size Titanium Clip ( 5.5X8.8Mm ) , 26.7Cm Long For Open Surgery , Titanium Clip Applier For Small Size Titanium Clip ( 2.6X3.4Mm ) , 19.0Cm Long For Open Surgery , Titanium Liga Clips Set Of 10 , Titanium Ligating Clip For Laparoscopy , Titanium Ligating Clip For Laparoscopy Large , Titanium Ligating Clip For Laparoscopy Medium , Titanium Ligating Clip For Laparoscopy Small , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Tmt Graph Paper A4 Size, 100 Piece / Pkt. , Tmt Paper Uniem Concept Aprop. . , Tmt Stickers . , Tobramycine60 Mginj. , Tobramycine + Loteprednoleye Drops 5Ml Eye Drop , Tolperisone150mg Tablets , Tolperisone Sr 450 Mg Tab. , Tolvaptan 15 Mg Tablets , Tolvaptan 30Mg Tablets , Toomey Glass Syringes; 100Ml , Toomey Glass Syringes; 50Ml , Topiramate 100 Mg Tab. , Topiramate 25 Mg Tab. , Topiramate 50 Mg Tab. , Torasemide 20 Mginj. , Torsemide 100 Mg Inj. , Torsemide Tablets , Tpi Lead 5, 6F Balloon Tiped , Tr Band , Tracheostomy Tube ( Pvc ) Sterile Single Use - ( Adult ) ( Size 7 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each ) , Tube , Tracheostomy Tube ( Pvc ) Sterile Single Use - ( Adult ) ( Size 8 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each ) , Tube , Tracheostomy Tube With Inner Canula Brush. All Size , Tracheostomy Tubes Cuffed All Size , Tracheostomy Tubes Fuller Jaction All Size , Tracheostomy Tubes Plain All Size , Tramadol + Paracetamol 50+500Mg Tab , Tramadol 37.5+ Dicyclomine Hydrocloride 20 + Pracetamol 325 Tab. , Tramadol 50Mgcap , Transducer For Intraparenchymal Icp Measurement ( Disposable ) , Transducer Protector , Transobturator Tape Sling 45 Cm Length. , Transparent Non Adherent Intra Venous Fixation Device Size 3Cmx3cm , Transparent Non Adherent Intra Venous Fixation Device Size 3Cmx3cm , Transpore Surgical Tape 2.5Cmx 9.1 Meter , Travoprost 0.004 %W / V, 5Ml Eye Drops , Travoprost 0.004% 3Ml Eye Drop , Travoprost Ip 0.004%W / V + Benzalkonium Chloride Solution Ip 0.02%V / V ( As Preservative ) Eye Drop , Tretinoin 0.1 %W / W, Gel , Tretinoin Usp 0.04% W / W ( As Redispheres ) In Aqueous Gel Base, Preservative: Sorbic Acid Ip 0.1% W / W Benzyl Alcohol Ip 0.5 % W / W, Tubeointment , Triamcinolone Acetonide ( 0.1% W / W ) In Buccal Pastointment , Trichlor Acetic Acid Crystal ( 1 Kg ) Solution , Trichloroacetic Acidointment , Tricholine Citrate 0.275 G , Sorbitol 7.15 G / 10 Ml ( 200Ml ) Syp. , Triclofos Sodium 500 Mg Syp. , Triclofos Sodium Bp 500 Gm In A Flavoured Syrup Base Bottle Of 30 Ml Syp. , Trifluoperazine 5 Mg Tab. , Trineptin 12.5 Mg Tab. , Trioxalen5 Mg Tab. , Trioxalen 25 Mg Tab. , Trioxaleneointment , Triple Layer Molded Face Masks - Fluid Resistant, Latex Free, 50 / Pkg - , Triple Lumen -- Cvc 4.5 Fr / 6 Cm , Triple Lumen -- Cvc 5.5 Fr / 8 Cm , Triple Lumen Catheter Full Set With Rolleson Syringe. , Triple Lumen --Cvc7fr / 12Cm , Triple Lumen --Cvc7fr / 15Cm , Triple Lumen Hd Cath 11Fr , Triple-Lumen Tip To Prevent Clogging Inside The Applicator , Waterproof Transparent Film Dressing Size 6Cm Dia With 3.5 Cm Dia Non Adherent Absorbent Pad , Tripong Forceps For Pcnl , Tripong Forceps For Ursl , Triway Cannuala . , Trucut Biopsy Needle 18 G Length 15 Cm , Trus Guided Prostate Biopsy Gun; Coaxial, Trucut, 18G, 25Cm , Trypan Blue Solution1 Ml Eye Drop , Tryphan Blue Vials Inj. , Trypsin-Chymotrypsin 50000 Au+Diclofenac 50 Mg Tab , Ttravoprost - Timolol 5Ml Eye Drop , Tube Ex Changer With Insertion Aid In One With 15Mm Connectors And Lure Lock Connections Should Have Depath Mark- Sizes - 2.5, 6.0 . , Tube Kojic Acid 2% W / W Arbutin 1.5 % W / W Mulberry Extract 1 % W / W Octinoate 7.5 % W / W Tube Of 15 Gm 1. , Tulle Grass Paraffin Gauze Dressing Sterile Leno Weave With Soft Paraffin Base. Size 15Cm*2Mtr , Tur Set , Tur Sets For Irrigation, Y Shape , Tur Silicon Tubings , Turp Drape; Turp Drape With Release And Absorbent ( 60 Gsm Sms 228 Cm X 178 Cm 5 / Cm Width Release 229 Cm Absorbent Layer 112 Cm X 92 Cm With Release Paper 38 Cm X 38 Cm , Turp Set. , Turpentine Oilointment , Twister Guide Wire , Two Stage Venous Cannulamultiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr. , Two Stage Venous Cannula Multiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr, 36 / 46Fr. , Two Stage Venous Cannula Multiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr. , Typhoid Vaccine Ui25 Mgc Inj. , Tyshak Balloon / Atlas Balloon 20-30Mm , Ultra Guard With 0.02 Micro Pall Filter. , Ultra Sound Jelly 250Ml Bottle . , Ultraflux Av 600S; Effective Surface Area 1.4 Sqm ;Wall Thickness 35 Micrometer;Membrane Polysulphone , Housing Material Polycarbonate , Potting Compound Polyurethane With Inline Steam Sterilisation;Inner Wall Thickness 220 Micrometer;Blood Filling Volume 100 Ml , Ultrasound Thermal Printer Rolls . , Ultraverse 014 -Btk Balloon 014 Dual Layer Hydrophilic Coating & Checker Flex Points For Unmatched Trackability With Innovative Reinforced Inner Lumen For Better Pushabilitydiameter :1.5 Mm To 5.0 Mm & Length: 20- 300 Mm. , Ultraverse 035Atk Balloon 035 Geoalign™ Marker Bands Are Designed To Increase Procedure Efficiency By Minimizing Fluoroscopy Exposure With Sheath Profile 5F Compatible Up To 8 X 80 Mm*Diameters: 3 - 12 Mm, & Lengths: 20 - 300 Mm , Umbilical Cotton Tape Sterile76 Cm X 3 Mm X 2 , Umbilical Cotton Tape Usp 2 Mm Wide X Length 75Cms , Uncoated Bi-Layer Lets Of Paracetamol Ip Er 675 Mg Tab. , Uncoated Bi-Layer Lets Of Paracetamol Ip Ir 325 Mg Tab. , Uncoated Low Profile Lightweight Monofilament Polypropylene Mesh Allows Complete Tissue In Growth , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges. Left Side, Medium Size:8.5 Cm X13.7 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Left Side, Extra Large Size: 12.4 Cm X17.3 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Left Side, Large Size:10.8 Cm X16 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Right Side, Extra Large Size: 12.4 Cm X17.3 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Right Side, Large Size:10.8 Cm X16 Cm , Ureteral Catheter , Ureteral Dialator Set ( Teflon ) ; Serial Teflon Dialator, 6Fr To 16 Fr , Ureteral Indwelling Double Pigtail Stent, Both End Open / One End Closed ( D J Stent ) Sizes - 3, 3.5, 4., 4.5, 5.5, 6, 6.5, 7, 8, 9, 10F , Ureteral Stent Or Double J Stent , Ureteric Balloon Dilator; 5Cm, 15F, Burst Pressure 20 Atm , Ureteric Catheter - 6 Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 3Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 5Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 6Fr, Straight Tip, 70Cm, Open Ended , Ureteroscopic Stone Retrieval Forceps, 3, 4 Fr, Triprong , Urethral Catheter Made Up Of Soft Color Less, Clear, Breathable, Odorless, 100% Silicon Having White Opaque Line And White Cyclindercal Balloon Tip 5 To 10 Ml Balloon Capacity. Sizes- 6, 8. , Urethral Catheter Made Up Of Soft Color Less, Clear, Breathable, Odorless, 100% Silicon Having White Opaque Line And White Cyclindercal Balloon Tip 5 To 10 Ml Balloon Capacity. Sizes-14, 16, 18, 20. , Methacrylate Based Oxygen Permeable Non Adherent 3 Dimensional Transforming Powder Dressing Size-4X4 , Urethral Stent , Urinary Drainage Bag ( Uro Bag ) 1 Lit . , Urinary Drainage Bag 2 Litre Cap With Non Return Valve ( Clinical Grade Pvc Sheet And Specially Designed Hook Facilities ) . , Urinary Drainage Bag 2 Litre Cap With Non Return Valve ( Eo Sterile ) , Urinary Drainage Bag 2 Litre With Uroflow Meter , Urine Sugar Kitone Diagnostic Stick 50 Strip , Uro Bag 100Ml ( Urine Collecting Bag With Measuring & Self Adhesive Facility ) . , Urograffin 76% Solution For Injection 50Ml Vial Bottle , Urokinase 5000 Iu Catheder Flushing Inj. , Ursodeoxy Cholic Acid 75 Mg Tab. , Usg Guided Kidney Biopsy Gun 16 G , Usg Guided Kidney Biopsy Gun 16G , Uv Protection Eye Cover With Adjustable Harnace, Double Protection Uv Filter, Absorbent Inner Layer, Ce Certified. ( With Uv Protection Certtificate. ) . , Vaccum Jar , Vaccum Outlet , Vaku 8 ( Vaccume Blood Collection Tube ) . , Vancomycin + Cefriaxone 1.5 Mg Inj. , Vancomycin 125 Mg Tablets , Varicose Veins Stockings S / M / L , Vascularhaemostatic Pad To Stop External Bleeding And Catheterization Site Bleeding , Chitosin Material, Size-2X2 Single Pack. Sterilized. . , Vascular Closer Device , Vascular Graft ( Ptfe / Ringed Ptfacron ) For Restoring Vascular Continuity, [ Straight Configuration ] Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Graft ( Ptfe / Ringed Ptfacron ) ( Y Configuration ) .Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Graft ( Ptfe / Ringed Ptfe / Dacron ) ( Y Configuration ) .Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Hemostatic Dressing In Sponge / Pad Form Made Of 100% Natural Biopolymer With A Net Positive Charge, Gama Sterilize, Moisture Proof Packing. Ce, Usfda Approved. Sizes- 10*10, 8*8, 5*5, 8*5. , Vasopressin Ection 40 Iu / 1Ml ( Pfs ) Inj. , Vecuronium Bromide Inj 2Mg / Ml ( 2Ml Amp ) , Venlaflaxine 150 Mg Cap. , Venlaflaxine 37.5 Mg Cap. , Venlaflaxine Sr 150 Mg Cap. , Venlaflaxine Sr 75Mg Cap. , Venous Stent- Self Expanding, Nitinol Based, Should Be Designed Specifically For The Venous System, Should Be Self Expanding, Nitnol Based, Tri Axial Catheters And Dual Speed Thumbwheel System For Smooth And Controlled Stent Deployment , Ventricular External Csf Drainage System Contains One Bag 30Cm. Ventricular Catheter With Stylet, Connector, Trocar, Catheter, Anchoring Coller And Connecting Tube. . , Verapamil40 Mg Sugar Coated Tab. , Verapamil80 Mg Sugar Coated Tab. , Verapamil 5 Mg / 2 Ml Inj. , Vessel Cannula With And Without Valve.Should Have Clear And Radiopaque Bodies, With A Female Luer, Beveled And Blunt, Sizes- 3Mm, 4Mm , Vessel Cannula With And Without Valve. Should Have Clear And Radiopaque Bodies, With A Female Luer, Beveled And Blunt, Sizes- 3Mm, 4Mm , Vessel Sealer Rf-60 Proobs - Etrio 314H. , Vessel Sealer Rf-60 Proobs - Etrio 325H. , Vessel Sealer Rf-60 Proobs - Etrio 335H. , Vessel Sealer Rf-60 Proobs - Nseal514 Rh . , Vessel Sealer Rf-60 Proobs - Nseal525 Rh . , Vessel Sealer Rf-60 Proobs - Nseal535 Rh . , Vi B110mg, Vi B2 10Mg, Vi B6 3Mg, Vi B12 15Mcg, Nicotinamide 45Mg, Calcium Pantothenate 50Mg Tab. , Vibratory Positive Expiratory Pressure Device For Bronchial Hygiene Therapy With Green And Blue Color Coded , Vicryl 1 Cutting Body , Vicryl 2-0 Round Body , Vicryl 3-0 Round Body , Vicryl -Size - 1 ( 4.0 Metric ) 40Mm, 1 / 2 Circle Reverse Cutting, ( Os-8 ) 70Cm. , Video Camera Cable Cover Ultra Sound Cover ( Size-15X250cm. ) . , Vit A Syp 100000 Unit / Ml ( 100 Ml Bottle ) Syp. , Vit B12 500 Mcg / Ml 30 Ml Vail Inj. , Vit. E400 Mg Cap , Vitamin - B1 10Mg + B2 10Mg+ B6 3Mg+ B12 15Mcg+ Niacinamide 100Mg+ Calcium Panthenol 50Mg+ Folic Acid 1.5Mg+ Vitamin C 150Mg+ Biotin 100Mcg Tab , Vitamin A - 50000Iu Injection , Vitamin A ( Soft Gelatin ) 50000 I.U Cap , Vitamin A Cap Usp Soft Gelatin Capsule 1 Lakh Iu Tab. , Vitamin A Inj. , Vitamin A Usp Soft Gelatin Sule Each Contains Vitamin A-2 Lac Iucap. , Vitamin B12, 500Mg. Inj. , Vitamin C-100Mg Tab , Vitamin D Sachets 60000 Iu Sachet , Vitamin D3 1000Iutab. , Vitamin D3 2000Iutab. , Vitamin E 200 Mg Capsule , Vitamin. Asyrup. 200Ml Syp. , Vitamin. E400mg Cap. , Vitamin-C, 50Mg + Elemental Iron 30Mg + Folic Acid 200 Mcg + Vitamin B12 0.75 Mcg Film Coated Tablet Tab. , Voldyne Spirometer-Hand Held ( Built-In Handle ) Spirometer With 5000 Ml & 2500Ml Capacity To Measure Inspired Volume ( Volume-Oriented Device ) To Allow Accurate And Easy Recording Of Adult & Pediatric Patient Progress, Flow Rate Cup To Promote Slower Inhalation And Provide Effective Distribution Of Air To All Parts Of The Lung, Individually Calibrated And Tested, Graduations Printed On Both Sides Of Unit With Mouthpiece And Tubing , Volume Incentive Spirometer Oxygen Port. . , Voriconazole 200Mg / Vials Injection , Vp Shunt . , Vpmp Shunt , Warfarin 1Mg Tablets , Warfarin 2.5 Mg Tab. , Warfarin 2Mg Tablets , Warfarin 5Mgtablets , Water Bed . , White Field Ointment Jar 500Gm , White Petroleum Jellyointment , White Threat Coat Make No 10 , White Threat Coat Make No 40 , Winged Infusion Set With Injection Site 20 Gauge X 0.75 Inch . , Winged Infusion Set With Injection Site 20 Gauge X 1.00 Inch . , Winged Infusion Set With Injection Site 20 Gauge X 1.50 Inch . , Winged Infusion Set With Injection Site 22 Gauge X 1.00 Inch . , Winged Infusion Set With Injection Site 22 Gauge X 1.50 Inch . , Wound Irrigation Gel 30 Ml Pvc Free, Dehp Free Tube Containing 0.1% Polihexanide And 0.1% Betaine And Glycerol , Wound Irrigation Solution 350 Ml Pvc Free, Dehp Free Bottle Containing 0.1% Polihexanide And 0.1% Betaine , Wound Irrigation Spary Dressing Containing Silver In The Form Of Silver Nitrate, Peppermint Oil, Glycerol, Buffer & Tween 20, 100Ml , Wound Manager Drain Pouch With Skin Barrier 104-160 Mm / 160-208 Mm / 208-297 Mm , Wound Suctionset No 12 . , Wound Suctionset No 14 . , Wound Suctionset No 16 . , Wound Suction Set No. 18 . , Wrist Forearm Splint ( Left & Right ) S / M / L , Wypoll 10 Pcs With Bacto Foam 180 Ml. Spray , Xanthinol Nicotinate150 Mg Tab. , Xience Xpedition Stent Complete Sizes Sequence , Xpedionmicroguide Wire , Xpedion Micro Guide Catheter , X-Ray Draier , X-Ray Film ( Blue Sensitivity ) 10*12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 12*12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 12*15 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 14*14 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 14*17 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 6 * 12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 6.5 * 8.5 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 8 * 10 ( 50 Sheet Packet ) , X-Ray Lead Apron Heavy , Xylocaine 4% Injection , Xylocaine Spray 10%50Ml. Spray , Xylocan Spary 2% Spary , Y Connector Push & Click , Yankar Suction Catheter . , Yankauer Suction Set ( With Tube & Suction Handle ) , Yankauer Suction Setyankauer Suction Handle With Flexible Kink-Resistant Tube , Y-Connector , Yukon Choice Flex Stent Complete Sizes Sequence , Yukon Choice Pc Stent Complete Sizes Sequence , Z-Fold Paper ( 150 Sheet Packet ) A4-Size Paper , Zinc 50Mg. Tab. , Zinc Sulfate Monohydrate 20Mg Tab. , Ziprasidone20 Mg Tab. , Ziprasidone40 Mg Tab. , Ziprasidone50 Mg Tab. , Zoledronate 5 Mg / 100Ml Inj. , Zuclopenthixol 200 Mg. Inj. , Zuclopenthixol 50 Mg Inj.
Contract Date: Feb 06, 2026 Contract Value : ₹ 70
Boards / Undertakings / PSU No of Bidders 32
Madhya Pradesh View Result →
9.
Health and Family Welfare #9115379 Technical Bid
Notice Inviting Tender For Medicine As Per Bid Documents , Name Of Item , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg , Acenocoumarol Tab Ip/ Nicoumalone Tab Ip 2 Mg , Acetazolamide Tab Ip 250Mg , Acetylcystine Solution Usp (Injection) 200 Mg/Ml , Act Kit Containing 3 Tablets Of Artesunate(100 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(750Mg+37.5Mg) , Act Kit Containing 3 Tablets Of Artesunate(150 Mg Each) And 2 Tablet Of Sulphadoxine And Pyrimethamine(500Mg+25Mg) , Act Kit Containing 3 Tablets Of Artesunate(25Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(250Mg+12.5Mg) , Act Kit Containing 3 Tablets Of Artesunate(50 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(500Mg+25Mg) , Acyclovir Cream 5% , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Acyclovir Oral Suspension Ip 400Mg/5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Adenosine Injection 6 Mg/2Ml , Adrenaline Injection Ip 1Mg/Ml Im/Iv Use , Albendazole Oral Suspension Ip 400 Mg/10Ml , Albendazole Tablets Ip 400 Mg(Detail In Rc) , Alendronate Sodium Tablets Usp / Bp 35 Mg , Allopurinol Tablets Ip 100 Mg , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amikacin Inj Ip 100 Mg 2Ml Vial , Amikacin Inj Ip 250 Mg 2Ml Vial , Amikacin Inj Ip 500 Mg 2Ml Vial , Aminophylline Inj Ip 25 Mg/Ml 10 Ml Vial , Amiodarone Hydrochloride Inj 50 Mg/Ml , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amitriptyline Tab Ip 25Mg Film Coated , Amlodipine And Atenolol Tablet (Amlodipine Besilate Equivalent To Amlodipine 5Mg,Atenolol 50Mg) , Amlodipine And Enalapril Maleate Tablets (Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril (Anhydrous) 5 Mg , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg/5 Ml (30Ml Bottle) , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mgg , Amoxycillin Oral Suspension Ip (Dry Syrup) 125 Mg/5Ml 30 Ml Bottle. , Amphotericin B Inj Ip 50 Mg , Ampicillin Cap Ip 500Mg , Ampicillin Injection Ip 500 Mg , Antacid Liquid,Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Antacid Tablets.Formula,Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Anti A Blood Grouping Serum Ip(Anti A Monoclonal Serum) , Anti B Blood Grouping Serum Ip(Anti B Mono Clonal Serum) , Anti D(Rh) Blood Grouping Serum Ip/Anti D Blood Grouping Serum Ip , Anti Inhibitor Coagulation Complex (Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial) , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg (30 Ml Bottle). , Artemether And Leumefantrine Tablet (40 Mg And 240 Mg) , Artemether And Leumefantrine Tablet (80 Mg And 480 Mg) , Artesunate Injection 60 Mg (I.M. I.V.Use) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O/O W/V (1Ml Ampoule),Sodium Chloride Injection Ip 0.9O/O W/V (5Ml Ampoule) , Ascorbic Acid Tab Ip 500 Mg , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab (Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg) , Aspirin Tablet Ip (Gastro-Resistant) 150 Mg , Atenolol Tab Ip 25 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Atorvastatin Tablets Ip 40 Mg , Atracurium Inj 10 Mg/Ml , Atropine Eye Ointment Ip 1% (3 Gm. Tube) , Atropine Sulphate Injection 0.6Mg/Ml , Atropine Sulphate Ophthalmic Solution Usp 1% (5 Ml.) , Azathioprine Tab Ip 50 Mg , Azithromycin Tab 100 Mg Dispersible Tabs (3 Tab Strip 10X3x3) , Azithromycin Tab Ip 500 Mg , Azithromycin Tablets Ip 250Mg , Aztreonam Injection 1Gm , Aztreonam Injection Usp 500 Mg , Beclomethasone Inhalation Ip 200 Mcg/Dose , Beclomethasone, Neomycin And Clotrimazole Cream (Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 %)(10 Gm. Tube) , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Betahistine Tab Ip 16 Mg , Betahistine Tab Ip 8 Mg , Betamethasone Dipropionate Cream Ip 0.05% (15 Gm. ) , Betamethasone Lotion Ip 0.05 O/O , Betamethasone Sod Phos Inj Ip 4Mg/Ml , Betamethasone Tab Ip 0.5Mg , Betaxolol Eye Drops 0.5 O/O , Biphasic Isophane Insulin Inj Ip (30 % Soluble Insulin And 70 % Isophane Insulin) Inj. 40 Iu/Ml(R-Dna Origin) , Bisacodyl Tab Ip 5 Mg , Black Disinfectant Fluid (Phenyl) As Per Schedule O Grade Iii5 Ltr Can , Bleomycin Injection Ip 15Mg (Bleomycin Sulphate Injection 15 Units) , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Bromocriptine Tablets Ip 2.5 Mg , Budesonide Nebulizer Suspension 0.25Mg/Ml , Budesonide Powder For Inhalation 200 Mcg , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg (4 Ml.) , Bupivacaine Inj Ip 0.5% (20 Ml.) , Calamine Lotion Ip 100Ml , Calcitriol Capsules Ip 0.25 Mcg , Calcium And Vitamin D3 Suspension (Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Calcium Gluconate Inj Ip 10% (Iv Use) (10Ml. Vial) , Calcium With Vitamin D Tablets Usp /Calcium And Colecalciferol Tablets Bp/Calcium And Vitamin D3 Tablets Ip(Elemental Calcium 500 Mg, Vitamin D3-250 Iu) (Non-Chewable) , Carbamazepine Oral Suspension Usp 100 Mg/5Ml , Carbamazepine Tab Ip 100 Mg (Film Coated) , Carbamazepine Tab Ip 200 Mg (Film Coated) , Carbimazole Tabs Ip 5 Mg (Film Coated) , Carboplatin Injection 150 Mg , Carboplatin Injection 450 Mg , Carboprost Tromethamine Injection Each Ml Contains Carboprost 0.25 Mg/Ml , Carboxymethylcellulose Eye Drops 0.5% (10 Ml. Drop) , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg/Ml (Paediatric Drops) , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj (Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm)(Im/Iv Use) , Cefotaxime Inj Ip 250 Mg , Cefotaxime Injection 1 G , Cefpodoxime Dispersible Tab 50 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G /Vial , Ceftriaxone Inj Ip 250 Mg/Vial , Ceftriaxone Inj Ip 500Mg/Vial , Cefuroxime Axetil Tab Ip 250 Mg , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Cephalexin Oral Suspension Ip (Cephalexin Dry Syrup Ip) 125Mg/ 5 Ml (30 Ml.) , Cephalexin Tablets 125 Mg (Dispersible Tablets) , Ceruminolytic Drops (Wax Dissolving Ear Drops) Paradichlorobenzene 2 O/O , Benzocaine 2.7 O/O , Chlorbutol 5 O/O, Turpentine Oil 15 O/O (10 Ml.) , Cetirizine Syrup Ip 5Mg/5 Ml (30 Ml.) , Cetirizine,Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg,Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetrimide Cream Ip 15 Gm , Chlorambucil Tab Ip 5 Mg , Chloramphenicol Eye Drops Ip 0.5 0/0 , Chlordiazepoxide Tablets Ip 10Mg , Chlorhexidine Gluconate Solution 5% 250 Ml , Chlorhexidine Mouthwash Ip/Bp 0.2 O/O (50 Ml.) , Chloroquine Phosphate Inj Ip 40 Mg/ Ml , Chloroquine Phosphate Suspension Ip 50 Mg/5Ml (60 Ml.) , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated , Chlorpheniramine Maleate Tab Ip 4Mg , Chlorpromazine Inj. Ip 25Mg/Ml , Chlorpromazine Tablets Ip 100 Mg (Coated Tablet) , Chlorpromazine Tablets Ip 25 Mg (Sugar Coated) , Chlorpromazine Tablets Ip 50 Mg (Coated Tablets) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets (Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg) , Cholecalciferol Granules 60,000 Iu /Gm , Cinnarizine Tablet Ip 75 Mg , Cinnarizine Tablets Ip 25 Mg , Ciprofloxacin 0.3 O/O And Dexamethasone 0.1 O/O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp (5 Ml.) , Ciprofloxacin Eye Drops 0.3 O/O W/V (5 Ml.) , Ciprofloxacin Injection Ip 200Mg/100Ml , Ciprofloxacin Ophthalmic Ointment Usp 0.3% (5 Gm.) , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Cisplatin Inj Ip 10 Mg/10 Ml , Cisplatin Inj Ip 50 Mg/ 50 Ml , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Clindamycin Phosphate Gel Usp 1 O/O (20 Gm.) , Clobazam Tablet/Capsule 10 Mg , Clobazam Tablet/Capsule 5 Mg , Clobetasol Propionate Cream 0.05 O/O (20 Gm.) , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Clonazepam Tablet 0.5 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Clopidogrel Tab Ip 75 Mg , Clotrimazole 1 O/O With Beclomethasone Dipropionate 0.025 O/O Ear Drops (5 Ml.) , Clotrimazole Cream Ip 2% W/W (15 Gm.) , Clotrimazole Mouth Paint (Clotrimazole 1 O/O W/V) (15 Ml.) , Clotrimazole Vaginal Tab Ip 500Mg , Cloxacillin Sodium Inj Ip 500Mg , Coal Tar 6% & Salicylic Acid 3% Ointment , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O/O + Salicylic Acid 3 O/O , Compound Benzoin Tincture Ip , Compound Sodium Lactate Inj. Ip , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Conjugated Estrogen Tabs Usp 0.625 Mg. , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg (50 Ml.) , Co-Trimoxazole Tablet (Trimethoprim 160Mg+Sulphamethoxazole 800Mg) , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg,Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg,Menthol 0.5 Mg, Syrup Q.S. (50Ml.) , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cyclosporin Capsule Usp/Ip 50 Mg , Cytarabine Injection Bp 500Mg , Dacarbazine Injection 500 Mg Usp/ Bp , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Dental Gel Choline Salicylate 8.7 O/O, Benzalkonium Chloride 0.01 O/O, Lignocaine Hcl 2 O/O (Flavoured Gel Base) (10 Gm.) , Desferrioxamine Injection Ip 500 Mg / Vial (For I.M. Inj And I.V S.C. Infusion) , Dexamethasone Inj Ip 8Mg/2Ml , Dexamethasone Tab Ip 0.5 Mg , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml (30 Ml.) , Dextrose Inj Ip 10% (500 Ml.) , Dextrose Inj Ip 25% W/V(100 Ml.) , Dextrose Inj Ip 5% (500 Ml.) , Diagnostic Sticks For Multiple Use Strip (Sugar, Ketone, Albumin) , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% (Iodine Conc.= 292 Mg/Ml) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W/V (Iodine = 370 Mg/Ml) , Diazepam Inj Ip 10Mg/2Ml (1M/Iv Use) , Diazepam Tab Ip 5 Mg , Diclofenac Gastro Resistant Tablet Ip 50 Mg(Enteric Coated) , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% (20 Gm.) , Diclofenac Sod + Paracetamol Tablets Diclofenac Sod 50 Mg + Paracetamol 325 Mg , Diclofenac Sodium Inj Ip 25 Mg/ Ml (Im/Iv Use) (3 Ml.) , Diclofence Prolonged Release Tablet Ip 100 Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg (10 Ml With Droper) , Dicyclomine Hydrochloride Oral Solution Ip 10Mg /5Ml , Dicyclomine Inj Ip 10 Mg /Ml , Dicyclomine Tab Ip 10 Mg , Diethylcarbamazine Tab Ip 100 Mg , Digoxin Inj Ip 0.25 Mg/Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dinoprostone Cream/ Gel 0.5 Mg Dinoprostone In Syringe , Diphtheria Antitoxin 10000 Iu , Dobutamine Inj Ip/Bp 50Mg/Ml/250Mg (Vial/)Dobutamine Inj Usp250 Mg/5Ml(Amp) , Domperidone Oral Drops 10Mg/ Ml (10Ml) , Domperidone Suspension Ip 5Mg/5Ml , Domperidone Tab Ip 10 Mg , Dopamine Hydrochloride Inj 40 Mg/Ml (5 Ml. Vial) , Doxorubicin Inj Ip 50 Mg/ 25 Ml , Doxycycline Cap Ip 100 Mg , Dried Factor Viii Fraction Ip (Iv Use) 1000 Iu/Vial , Dried Factor Viii Fraction Ip (Iv Use) 500 Iu/Vial , Dried Human Anti Haemophlic Fraction Ip (Dried Factor Viii Fraction Ip) 250 Iu/ Vial (Iv Use) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Drotaverine Hydrochloride Inj 40 Mg/2 Ml Vial , Drotaverine Tab Ip 40 Mg , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate(200 Mg Each) And 2 Tablet Of Sulphadoxine Pyrimethamine(750Mg+37.5Mg)Each Or 3 Tablets Of Sulphadoxine Pyrimethamine(500+25)Mg , Enalapril Maleate Tab Ip 2.5Mg , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tablets Ip 10 Mg , Enoxaparin Sodium Inj Ip 60 Mg , Escitalopram Tab Ip 10 Mg , Ethamsylate Inj 250 Mg/ 2Ml (Im/Iv) , Ethinyloestradiol Tabs Ip 50 Mcg , Etoposide Inj Ip 100 Mg , Etoricoxib Tab Ip 120Mg , Etoricoxib Tablet 90 Mg , Factor Ix Concentrate (Purified) 600 I.U.(Human Coagulation Factor Ix) , Fenofibrate Capsules/ Tab Ip 200 Mg , Fentanyl Citrate Injection 50Mcg/Ml , Fentanyl Citrate Injection Ip 2 Ml , Ferrous Sulphate With Folic Acid Tab (Paediatric) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Filgrastim Injection (Granulocyte Colony Stimulating Factor) (Sc/Iv Use) 300 Mcg , Finasteride Tablets Ip 5 Mg , Flavoxate Tablets Ip/Bp 200 Mg (Coated Tablet) , Fluconazole Eye Drops 0.3% (5 Ml.) , Fluconazole Tablets Ip 150Mg , Flunarizine Tab 5 Mg , Fluorouracil Inj Ip 250 Mg/ 5Ml , Fluoxetine Cap Ip 20 Mg , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O/O W/V (5 Ml.) , Folic Acid Tab Ip 5 Mg , Formaldehyde Solution (34.5 Per. - 38 Per.) (450Ml.) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Framycetin Sulphate Cream 1 O/O 100 Gm Pack , Framycetin Sulphate Cream 1 O/O 30Gm Pack , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg/Ml (Im And Iv Use) (2 Ml.) , Fusidic Acid Cream Ip 2% (10 Gm.) , Gabapentine Tablet/Capsule 100Mg , Gabapentine Tablet/Capsule 300Mg , Gadodiamide Inj. 0.5Mml/Ml Vial , Gamma Benzene Hexachloride Lotion 1%(Lindane Lotion Usp) 100Ml. , Gemcitabine For Injection 1Gm , Gemcitabine For Injection 200 Mg , Gentamycin Injection Ip 80Mg/2Ml (Im/ Iv Use) (2 Ml.) , Gentian Violet Topical Solution Usp 1O/O , Glibenclamide And Metformin Hydrochloride (Sr) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg (Sustained Release) , Glibenclamide Tab Ip 5 Mg , Gliclazide And Metformin Tablets (Gliclazide 80 Mg And Metformin Hcl 500 Mg) , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 1Mg , Glimepiride Tab Ip 2 Mg , Glimepiride, Pioglitazone And Metformin Hydrochloride (Sustained Release) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride (Sustained Release) 500 Mg , Glipizide And Metformin Hydrochloride Tablets Usp (Glipizide 5 Mg, Metformin Hydrochloride 500 Mg) , Glipizide Tab Ip 5Mg , Glucagon For Injection Usp 1 Mg/Ml , Gluteraldehyde Solution 2% , Glycerin Ip 100 Ml , Glycerin Ip 400 Gm , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Glycopyrrolate Inj Usp 0.2 Mg/Ml (1 Ml.) , Griseofulvin Tab Ip 125 Mg , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% (15 Ml.) , Haloperidol Inj Ip 5 Mg/Ml (1 Ml. Vial) , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Halothane Bp , Heparin Sodium Inj Ip 5000 Iu/Ml (Im/Iv Use) , Homatropine Eye Drops Ip 2% (5 Ml.) , Human Albumin Solution Ip 20% (100 Ml.) , Human Anti D Immunoglobulin 150 Mcg , Human Anti D Immunoglobulin Injection 300Mcg (Im Use) , Human Rabies Immunoglobulin Inj 150 Iu/ Ml , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Hydrochlorthiazide Tab Ip 12.5 Mg , Hydrochlorthiazide Tab Ip 25Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial (Im/Iv Use) , Hydrogen Peroxide Solution Ip 6 O/O (20 Vol) (450 Ml) , Hydroxychloroquine Sulphate Tablets 200Mg , Hydroxyethyl Starch (130/0.4) 6 O/O W/V With Sodium Chloride 0.9 O/O W/V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion (500 Ml) , Hydroxyprogesterone Inj Ip 250Mg /Ml (1 Ml) , Hydroxypropylmethyl Cellulose Solution 20 Mg/ Ml , Hydroxyzine Tab Ip 25 Mg , Hyoscine Butyl Bromide Tablets Ip 10Mg , Hyoscine Butylbromide Inj Ip 20 Mg/ Ml , Ibuprofen And Paracetamol Tablets Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Oral Suspension Bp /Usp 100 Mg/ 5 Ml (60 Ml) , Ibuprofen Tab Ip 200 Mg (Coated) , Ibuprofen Tab Ip 400 Mg (Coated) , Ifosfamide Injection Ip/Bp/Usp 1Gm , Imatinib Tab 400Mg , Imipramine Tab Ip 25 Mg (Coated Tab) , Imipramine Tab Ip 75 Mg (Coated) , Indomethacin Cap Ip 25 Mg , Insulin Glargine 100Iu/Ml 3 Ml Vial , Insulin Glargine 100Iu/Ml 5Ml Vial , Insulin Injection Ip (Soluble Insulin/Neutral Insulin Injection)40 Iu/Ml(R.Dna Origin) , Iohexol Usp (Solution For Injection) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine/Ml , Iohexol Usp(Solution For Injection) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine/Ml. , Ipratropium Bromide Nebulizer Solution 250 Mcg/ Ml , Ipratropium Powder For Inhalation Ip 40 Mcg , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg (100 Ml) , Iron Sucrose Injection Usp/Bp 20Mg/Ml (For Iv Use) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg (10 Ml) , Isoflurane Usp , Isophane Insulin Inj Ip 40 Iu /Ml , Isoprenaline Injection Ip 2Mg / Ml , Isosorbide Dinitrate Tab Ip 5 Mg (15 Gm) , Isosorbide Mononitrate Tabs Ip 20 Mg , Isoxsuprine Inj Ip 5 Mg/Ml , Isoxsuprine Tab Ip 20 Mg , Itraconazole Cap 100 Mg , Ketamine Inj Ip 50 Mg/Ml , Ketoconazole Cream 2% (15 Gm) , Labetalol Hcl Inj Ip 20Mg/4Ml , Labetalol Tab Ip 100Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp/Bp 10Gm/15Ml Or 3.35 Gm/5Ml (100 Ml) , L-Asparaginase Inj 10000 Iu , Leflunomide Tablets Ip/Usp 10Mg(Film Coated) , Leflunomide Tablets Ip/Usp 20Mg (Film Coated) , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg /Ml , Levetiracetam Injection 500Mg/5Ml , Levetiracetam Oral Suspension 100Mg/Ml , Levetiracetam Tablet 500 Mg , Levoceitrizine Tablet 5Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levofloxacin Tablets Ip 250 Mg , Lidocaine Hcl Topical Solution Usp 4% , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg (30 Ml) , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose (Monohydrate) 75 Mg , Lignocaine Gel Ip 2% (30 Gm) , Lignocaine Inj Ip 2% (30 Gm) , Lignocaine Ointment 5 O/O , Linezolid Inj 200Mg/100Ml , Linezolid Tablets Ip 600 Mg , Liquid Paraffin Ip 100 Ml , Liquid Paraffin Ip 400 Ml , Lisinopril Tab Ip 2.5 Mg , Lisinopril Tab Ip 5 Mg , Lisinopril Tablets Ip 10 Mg , Lithium Carbonate Tab Ip 300 Mg , Loperamide Tab Ip 2 Mg , Lorazepam Inj 2 Mg/Ml , Losartan Potassium And Amlodipine Tablets Ip (Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg) , Losartan Potassium And Hydrochlorothiazide Tablets Ip(Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg) , Losartan Tab Ip 25 Mg , Losartan Tab Ip 50 Mg , Lysol (Cresol With Soap Solution) Ip (Cresol 50 O/O + Soap 50 O/O) (5 Ltr. Can) , Magnesium Sulphate Inj. 50Mg/Ml (50%W/V) , Mannitol Inj Ip 20% W/V (100 Ml) , Mannitol With Glycerin Injection 10 O/O + 10 O/O W/V (For Intravenous Infusion) , Mecobalamin Inj 500 Mcg/Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Mefenamic Acid Tablets Bp 500 Mg , Mefloquine Tablets Ip 250 Mg , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Meropenem Inj Ip 500 Mg , Meropenem Inj. Ip 1Gm , Metformin Hcl (Sustained Release) And Glimepiride Tab Metformin Hcl (Sustained Release) 500Mg ,Glimepiride 1Mg , Metformin Hydrochloride (Sustained Release) And Glimepiride Tablets (Metformin Hydrochloride(Sustained Release) 500 Mg, Glimipiride 2Mg) , Metformin Hydrochloride(Sustained Release Tablets Ip 1000 Mg , Metformin Tab Ip 500 Mg(Film Coated) , Methotrexate Inj Ip 50 Mg/2 Ml , Methotrexate Tab Ip 2.5 Mg , Methotrexate Tablets Ip 10 Mg , Methyl Cobalmine Tablet 1500Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Methyldopa Tab Ip 250Mg Film Coated , Methylergometrine Inj Ip 0.2 Mg/Ml , Methylergometrine Tab Ip 0.125 Mg , Metoclopramide Hydrochloride Syrup Ip 5 Mg/ 5Ml , Metoclopramide Inj Ip 10Mg/2Ml , Metoclopramide Tab Ip 10 Mg , Metoprolol Succinate Extended Release Tablets Ip/Usp 50 Mg , Metoprolol Tablets Ip 25 Mg , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel (10 Gm) , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base/5Ml , Metronidazole Inj Ip 500 Mg/100Ml , Metronidazole Tablets Ip 200 Mg (Film Coated) , Metronidazole Tablets Ip 400 Mg (Film Coated) , Miconazole Nitrate Cream Ip 2% (15 Gm) , Midazolam Inj Ip 1 Mg/Ml , Mifepristone Tab Ip 200Mg , Misoprostol Tab Ip 200 Mcg , Mitomycine Injection Ip 10 Mg/Mitomycine For Injection Usp 10 Mg , Montelucast(10Mg) + Levocetrizine Tablet (5Mg) , Morphine Sulphate Inj Ip 10Mg/Ml , Multiple Electrolytes And Dextrose Injection Type I Ip (Electrolyte P Injection ) , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg (15 Ml) , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Naloxone Inj Ip 0.4Mg/ Ml , Naproxen Tablet Ip 250Mg , Naproxen Tablet Ip 500Mg , Neomycin Bacitracin And Sulphacetamide Power (Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg) (10 Gm) , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Neostigmine Inj Ip 0.5 Mg/Ml , Neostigmine Injection Ip 2.5Mg/5Ml , Neostigmine Tab Ip 15 Mg , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg (Sustained Release) , Nitrofurantoin Tab Ip 100Mg , Nitroglycerin Inj 5 Mg/ Ml , Noradrenaline Injection Ip 2 Mg/Ml , Norethisterone Tab Ip 5 Mg , Norfloxacin Tab Ip 400Mg Film Coated , Normal Human Intravenous Immunoglobulin 5G/100Ml , Octreotide Injection 50 Mcg/Ml , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml(In Nacl Inj) , Ofloxacin Oral Suspension Ip 50Mg/ 5Ml (30 Ml) , Ofloxacin Tab Ip 200 Mg , Ointment Containing Lidocaine Ip 3 O/O Zinc Oxide Ip 5 O/O , Hydrocortisone Ip 0.25 O/O, Allantoin Ip 0.5 O/O , Olanzapine Tab Ip 5 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg/Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Ors Powder Ip , Oseltamivir Capsule Ip 30 Mg (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg) , Oseltamivir Capsule Ip 45 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg) , Oseltamivir Capsule Ip 75 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg/Ml (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg/Ml (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Oxaliplatin Injection Usp 50 Mg , Oxytocin Inj Ip 5 Iu/Ml , Paclitaxel Inj Ip 100 Mg , Paclitaxel Inj Ip 260 Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip(Each Ml Contains Paracetamol 150Mg) (15 Ml) , Paracetamol Inj. 150 Mg/Ml , Paracetamol Syrup Ip 125 Mg/5Ml (Detail In Rc) (60 Ml) , Paracetamol Tab Ip 500 Mg , Pentazocine Inj Ip 30Mg/Ml (Im/Iv Use) , Pentoprazole Inj 40 Mg , Peritonial Dialysis Solution Ip , Permethrin Cream 5% , Permethrin Lotion 5% , Pheniramine Inj Ip 22.75Mg /Ml , Phenobarbitone Inj Ip 200Mg/Ml (1 Ml) , Phenobarbitone Tab Ip 30 Mg , Phenylephrine Hydrochloride Opthalmic Solution Usp/Phenylephrine Eye Drops Bp 5% , Phenytoin Injection 50Mg/Ml , Phenytoin Oral Suspension Ip 25Mg/Ml , Phenytoin Tab Ip 100 Mg (Film Coated) , Pilocarpine Eye Drops Ip 2 O/O , Pioglitazone Tab Ip 15 Mg , Piperacillin + Tazobactum For Injection Usp 4Gm+500Mg , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Potassium Chloride Inj. 0.15 Gm/Ml , Potassium Chloride Oral Solution U.S.P 500Mg/ 5Ml , Povidone Iodine Ointment 5% 15 Gm , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O/O W/V Povidone Iodine (Suitable For Hand Wash) (500 Ml) , Povidone Iodine Solution Ip 10 % (100 Ml) , Povidone Iodine Solution Ip 5 % 500 Ml , Povidone Iodine Solution Ip 5% 100Ml Bottle , Pralidoxime Chloride Injection Ip 25 Mg/Ml / 500 Mg , Prazosin Tablets (Extended Release) 2.5 Mg , Prednisolone Tab 20 Mg , Prednisolone Tab Ip 5 Mg , Prednisolone Tablet Ip 10 Mg , Pregabalin Cap Ip 75 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Progesterone Inj 200 Mg/ 2Ml , Promethazine Inj Ip 25Mg/Ml , Promethazine Syrup Ip 5 Mg/5Ml , Promethazine Tab Ip 25 Mg , Propofol Inj Ip/Bp/Usp 10 Mg/Ml , Propranolol Tab Ip 40 Mg , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Quetiapine Tablet Ip 25Mg , Quetiapine Tablet Ip 50Mg , Quinine Dihydrochloride Inj Ip 300 Mg/Ml , Quinine Sulphate Tablets Ip 300 Mg (Film Coated) , Rabies Antiserum Ip (Equine) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments (I.M./Sc Use) , Rabies Vaccine Human (Cell Culture) Ip (Intradermal) 2.5 Iu , Rabies Vaccine Human (Cell Culture) Ip (Intramuscular) 2.5 Iu/ Dose , Ramipril Tablets Ip 2.5 Mg , Ranitidine Hcl Injection Ip 50Mg/2Ml , Ranitidine Tab Ip 150Mg Film Coated , Ranitidine Tab Ip 300Mg Film Coated , Recombinant Coagulation Factor Viia 1Mg , Recombinant Coagulation Factor Viia 2Mg , Rh-Erythropoetin Inj 10000 Iu , Rh-Erythropoetin Inj 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Risperidone Tab 1 Mg , Risperidone Tab 2Mg , Salbutamol Inhalation 100 Mcg /Dose , Salbutamol Nebuliser Solution Bp 5 Mg/Ml (10 Ml) , Salbutamol Syrup Ip 2Mg/ 5Ml (100 Ml) , Salbutamol Tab Ip 2 Mg , Salbutamol Tablet Ip 4 Mg , Saline Nasal Solution (Drops) (Sodium Chloride 0.65 O/O) (10 Ml) , Sertraline Tab 50 Mg , Sevoflurane , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Snake Venum Anti Serum Ip (Lyophilized)Polyvalent Anti Snake Venum,Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum,0.45 Mg Of Common Kraite(Bungaras)Venum(Details In Rc) , Sodium Bicarbonate Inj Ip 7.5% W/V , Sodium Chloride And Dextrose Injection Ip 0.9 O/O + 5 O/O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O/O Disodium Hydrogen Phosphate Dodecahydrate 8 O/O , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Sodium Valproate Inj 100 Mg/ Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml (100 Ml) , Sodium Valproate Tablet(Gastro Resistant) Ip 500Mg , Spironolactone Tab Ip 25Mg , Spironolactone Tablets Ip 50 Mg , Streptokinase Injection 15 Lac Units , Succinylcholine Inj. Ip 50 Mg/Ml (Iv Use) , Sulfasalazine Delayed Release Tablets Usp / Gastroresistant Sulfasalazine Tablets Bp 500 Mg , Surfactant For Intratrecheal Instillation (Natural Bovine Lung Surfactant) , Surgical Spirit Ip/Bp (100 Ml) , Surgical Spirit Ip/Bp (500 Ml) , Tamoxifen Tab Ip 10 Mg , Tamsulosin Hcl Tablets/Capsule 0.4 Mg , Telmisartan Tablets Ip 40 Mg , Tenaligliptin Tablet 20Mg , Terazosin Tab Usp 1 Mg , Terazosin Tablets Usp 2 Mg , Terbutaline Tablets Ip 2.5 Mg , Tetanus Immunoglobulin 250 Iu/ Vial , Tetanus Vaccine (Adsorbed) Ip 5 Ml Vial , Theophylline And Etofylline Injection (Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg) , Theophylline And Etofylline Tablets (Theophylline Ip 23Mg + Etofylline Ip 77 Mg) , Theophylline Tablet 400Mg Sustained Release/ Controlled Release (Theophylline Prolonged Released Tablet Ip) , Thiamine Tablets Ip 100 Mg , Thiopentone Inj Ip 0.5 G , Thyroxine Sodium Tablets Ip 100Mcg , Thyroxine Tablets Ip 50 Mcg , Timolol Eye Drops Ip 0.5 O/O W/V , Tinidazole Tab Ip 300 Mg (Film Coated) , Tinidazole Tab Ip 500 Mg (Film Coated) , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O/O +0.1 O/O (5 Ml) , Tobramycin Eye Drops 0.3% [331] (5 Ml) , Tobramycin Ophthalmic Ointment Usp 0.3% (5 Gm) , Tooth Gel Sodium Monofluorophosphate 0.7 O/O And Potassium Nitrate 5 O/O (In Flavoured Base) (50 Gm) , Torsemide Inj 10 Mg/Ml , Torsemide Tab 10 Mg , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg/Ml , Tranexamic Acid Tablets Ip/Bp 500 Mg , Travoprost Eye Drops Ip 0.004 O/O (5 Ml) , Tretenoin Cream Usp 0.025% (20 Gm) , Trifluperazine Tab Ip 5 Mg Coated , Trihexyphenidyl Hcl Tab Ip 2 Mg , Tropicamide Eye Drop Ip 1O/O , Urokinase Injection 5 Lac Unit (Lyophilized) , Ursodeoxycholic Acid Tablets 300 Mg , Valethamate Bromide Inj 8Mg / Ml , Vancomycin For Intravenous Infusion Ip 1 Gm , Vancomycin For Intravenous Infusion Ip 500 Mg , Vdrl Antigen (With + Ve And - Ve Control) / Rpr Slide Kit , Vecuronium Bromide For Injection 4Mg (Freeze Dried) , Verapamil Tab Ip 40 Mg Film Coated , Vinblastine Inj Ip 10Mg/ 10Ml , Vincristine Inj Ip 1Mg(Vial)/Vincristin Injection Usp 1Mg/Ml (Amp) , Vitamin A Paediatric Oral Solution Ip(Vitamin A Concentrate Oil Ip)Each Ml Contains Vitamin A 100000 Iu (100 Ml) , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi (Prophylactic) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg (With Appropriate Overages) , Vitamin D3 Oral Solution 60000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. (Aqueous Solution) , Vitamin K-1 (Phytomenadione) 1Mg/0.5Ml Injection (Detail In Rc) , Warfarin Sodium. Tab Ip 5Mg , Water For Inj Ip , Xylometazoline Nasal Drops Ip 0.1% (5 Ml) , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Isoflurane Usp [7] , Lignocaine And Dextrose Injection Ip Each Mlcontains Lignocaine 50 Mg And Dextrose(Monohydrate) 75 Mg [11] , Indomethacin Cap Ip 25 Mg [436] , Etoricoxib Tab Ip 120Mg [495] , Etoricoxib Tablet 90 Mg [658] , Diclofenac Sodium Aqueous Injection 75Mg/ Ml 1Ml Size, Iv & Im Use [695] , Paracetamol Infusion Ip 1% W/V 100Ml Size [696 ] (100 Ml) , Ketorolac Tablet 10 Mg [697] , Baclofen Tablet Ip 10 Mg (Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) [698] , Tizanidine Hydrochloride Tablet Ip 2 Mg (Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg) [699] , Naloxone Inj Ip 0.4Mg/ Ml [51] , Gabapentine Tablet/ Capsule 100Mg [667] , Gabapentine Tablet/ Capsule 300Mg [668] , Divalproex Extended Release Tablet Ip 250 Mg (Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg) [702] , Ciprofloxacin Injection Ip 200Mg/100Ml [101] , Griseofulvin Tab Ip 125 Mg [117 , Ofloxacin Infusion Ip 200Mg / 100 Ml(In Nacl Inj) [522] , Cefadroxil Tablet 250 Mg [709] , Cefadroxil Tablet 500 Mg [710] , Levofloxacin Tablet Ip 500 Mg (Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg) [712] , Terbinafine Hydrochloride Tablet 250 Mg [722] , Azathioprine Tab Ip 50 Mg [133] , Methotrexate Tablets Ip 10 Mg [536] , Heparin Sodium Inj Ip 5000 Iu/Ml (Im/Iv Use) [174] , Ethamsylate Tablet Bp 500 Mg (Each Uncoated Coated Tablet Contains Ethamsylate Bp 500 Mg) [745] , Tranexamic Acid Injection Ip 100Mg/Ml 5Ml Size [747] , Digoxin Inj Ip 0.25 Mg/ Ml [189] , Dobutamine Inj Ip 50Mg /Ml/250Mg (Vial/) Dobutamine Inj Ip 250 Mg/5Ml(Amp) [192] , Nitroglycerin Inj 5 Mg/ Ml [205] , Fenofibrate Capsules/ Tab Ip 200 Mg [550] , Urokinase Injection 5 Lac Unit (Lyophilized) [557] , Powder Clotrimazole 1 % W/W 30 Gm [759] , Terbinafine Ointment 1 %W/W (10 Gm Tube) [760] , Mupirocin Cream Usp 2 % (Each Gram Contains 22.5 Mg Mupirocin Calcium Usp In A Mineral Oil Cream Base) 15 Gm Size [762] , Vdrl Antigen (With + Ve And - Ve Control) /Rpr Slide Kit [242] , Diagnostic Sticks For Multiple Use Strip (Sugar Ketone, Albumin) [673] , Diagnostic Strip For Glucose,Ketone [673A] , Diagnostic Strip For Glucose,Protein [673B] , Torsemide Inj 10 Mg/Ml [471] , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet (Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) [763] , Prochlorperazine Mesylate Injection12.5Mg/Ml 5Ml Size [764] , Probiotic Sachets 1 Gm Size (Each Gram Sachet Contains Saccharomyces Boulardii 250Mg &Lactic Acid Bacillus 150 Million Spores) [765] , Carbimazole Tabs Ip 5 Mg (Film Coated) [280] , Tenaligliptin Tablet 20Mg [682] , Hepatitis B Immunologlobin Injection Ip 100 I.U [767] , Eye Drop Moxifloxacin 0.5% W/V Ophthalmic Solution Ip5ml Size [770] , Isoxsuprine Inj Ip 5 Mg/ Ml [333] , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg (Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg) [772] , Human Chorionic Gonadotropin Injection Ip 5000 I.U. [774] , Zolpidem Tablet 5 Mg [779] , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg,Menthol 0.5 Mg,Syrup Q.S. [368] (50 Ml) , Formoterol Fumerate &Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg [616] , Cough Syrup/ Expectorant(50) Ml [692] (50 Ml) , Acebrophylline Tablet 100 Mg [780] , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection(I.V.) [382] , Sodium Chloride 0.45% W/V Polypack 500 Ml [782] , Tamsulosin Hcl Tablets/ Capsule 0.4 Mg [576] , Dutasteride Tablet 0.5 Mg [787] , Alkylizer Syrup 1.4 Gm/ 5 Ml ( 100 Ml ) (Disodium Hydrogen Citrate)[788] (100 Ml) , Betahistine Tab Ip 16 Mg [542] , Mecobalamin Inj 500 Mcg/Ml [624] , Multi Vitamin Syrup [790] , Flunarizine Tab 5 Mg [147] , Pregabalin Cap Ip 75 Mg [634] , Vitamin E Capsule 400 Mg [795] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 [R1] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 [R2] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 [R3] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 [R3] 76 Cm) Size -1/0 [R4] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suturechromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 [R5] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rbneedle 30 Mm Length 76 Cm) Size-2/0 [R6] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 [R7] , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coatedpolyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size - 3/0 1/2Cir Rbneedle 20Mm Length 70Cm [R9] , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm [R16] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0 (1/2 Cir Rb Needle 20Mm, Length 76 Cm) [R20] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 16 (Details In Rc) [S96.A] , Close Wound Drainage Device Under Negative Pressure (Closed Woundsuction Unit) Size Of Bellow 800 Ml, Catheter Size 18 (Details In Rc) [S96.B] , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- (Details In Rc) [S97] , Alkelizer Syp , Amino Acid Inj 200 Ml , Azitromycin 100 Mg Syp , Black Googles , Bleeching Powder Bags 25 Kg , Blood Collection Bags 350 Ml , Botroclot Lotion , Buds , Cannula Fixer , Carbolic Acid Crystalline , Cefipime Inj 1Gm , Cefuroxime 250 Mg Inj , Cefuroxime 500 Mg Inj , Compound Sodium In Glass 500 Ml , Corneal Scissor Curved , Cotton Bandage 3 Inch[Lp.25]-[M] , Cotton Bandage 4 Inch[Lp.6]-[St] , Cotton Bandage 6 Inch[Lp.7]-[St] , Cough Syp (Seddative Formula) , Crescent Blade , Crescent Sics Blade , Cup Googles , Disposable Needle No. 23[Lp.2]-[St] , Disposable Needle No. 24[Lp.3]-[St] , Disposable Needle No. 26[Lp.4]-[St] , Disposable Needle No.22[Lp.1]-[St] , Ecoshield Solution For Ulv-Fogger Maschine , Elastoplast 10Cmx1mt , Elastoplast 10Cmx2/3Mt , Enzyme Drops 100 Ml , Esmolol 10 Ml Inj , Ethamsylate Tab 250 Mg , Fexofenadine Syp , Gauze Than[Lp.5]-[St] ( 120 Cm X 9 Mtr.) Claim 108 Cmx8.10 Mtr. , Haemaccel Inj , Hand Sanitizer Solution , Hepatiti Vaccine 1 Ml , Hmt Inj , Hydrodisection Cannula , Irrigation Cannula G20,22,22 , Keratone 2.8Mm Sics Blades Inj , Keratone Blades For Eye , Lense Dialer , Limbs Forceps , Liquid Soap For Hand Wash , Mephentermine Inj 1 Ml , Mephentermine Inj 10 Ml , Microscope Bulb /Blade , Moxifloxacin & Dexamethasone Eye Drops , Moxifloxacin Eye Drops , Neotach Inj , Pampers(Sanitary Pads For Kids) , Pilocarpine Sulphate Inj , Plastic Apron , Plastic Bags ( Biogradable 0, Minimum 50 Micron Size( Black,Red, Blue, Yellow) , Refractive Spectacals , Side Port , Silk Suture 10-0 With Needle , Simco Cannula 22 G , Simco Cannula 22 G , Skin Traction Kit (Adult) Sponge , Skin Traction Kit (Kid) Sponge , Snitary Napkins Handloom , Sodium Chloride Eye Drops , Sodium Hypochloride Solution 5 Litre , Sterile Disposable Spinal Needle For Single Use. 23G X 3 1/2 Inch , Sterle Catheter K-90 , Sterle Catheter K-91 , Swab Stick(Buds) , Syringe 50 Ml Sterile,Single Use Disposable , Timolol Maleate Eye Drops , Tranexamic Acid Inj , Tropicamidem & Phenylephrineeye Drop , Trypan Blue Dye , Tst Sterilzer Strips (For Bowie & Dick Test) , Vitamin B Complex Syp , Xylocard 2% Inj , Zinc Sulphate Drops , Puncture Proof Box , Three Bucket System , Bins 30 Ltr , Bins 40 Ltr , Bins 50 Ltr , Bins With Paddle 30 Ltr , Bins With Paddle 40 Ltr , Bins With Paddle 50 Ltr , Black Disinfectant Fluid (Phenyl) As Per Schedule O Grade Iii20 Ltr Can , Ethamsylate Tab 500 Mg , Abdominal Drain Kit (With Collection Bag 2000 Ml Size 24 (Details In Rc) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) Size 28 (Details In Rc) , Abdominal Drain Kit,Sterile,Having Drainage Cather And Collection Bag(2000) Ml Size 32 (Details In Rc) , Absorbable Gelatin Sponge 80 X 50X 10Mm(Details In Rc) , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property(Details In Rc) , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 30 Mm Length 76 Cm) Size-2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic Size-3/0 (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 1/0 1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 2/0 1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 1 1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 3/0 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 (1/2 Circle Reverse Cutting 50 Mm Length 90Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1/0(1/2 Circle Rb 30Mm Needle,Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2/0 (1/2 Circle Rb 31Mm Needle, Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)1/2 Cir Rb Needle Size-1/0 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size - 3/0 1/2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1 1/2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1/0(1/2 Cir Rb Needle 40Mm Length 90 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-4/0 (1/2 Cir Rb Needle 20Mm Length 70 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 3/0 3/8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture (Synthetic)Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 3/0 3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 1 1/2 Cir Tapercut Needle (Heavy) 40Mm Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial Coated Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial With Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1/0 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-3/0(1/2 Cir Conventional 25Mm Length 90 Cm)Undyed , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-4/0 3/8 Circle Cutting 16Mm Needle,Suture Length 70Cm , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate,Size 3/0 (1/2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 3/0 (3/8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 4/0 (1/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) , Absorbable Surgical Sutures,Sterilised Needled Polyglecaprone/Polyglyconate,Monofilament Sutures Size 2/0 (1/2 Circle Oval Rb Needle 26Mm Needle,Suture Length Of 70Cm) , Absorbent Cotton Wool Ip 500 Gm , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , B.B Silk Suture (3/8 Cir Rb Needle 16Mm, Length 76 Cm Size 5/0 (Details In Rc) , B.B Silk Suture (3/8 Cir Rb Needle 20Mm, Length 76 Cm Size 4/0 (Details In Rc) , Blood Administration Set Blood Transfusion Set (Details In Rc) , Bone Cement , Bone Wax Sterilised , Catheter,Size 10(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 16(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 18(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 20(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 22(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 24(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 8(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Chromic Catgut Suture(3/8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm) Size 6/0 (Details In Rc) , Chromic Catgut Suture(3/8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm) Size 4/0 (Details In Rc) , Chromic Catgut Suture(3/8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm) Size 5/0 (Details In Rc) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 16 (Details In Rc) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 18 (Details In Rc) , Corrugated Drainage Sheet - All Sizes(Details In Rc) , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powder Free , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powdered , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Cuff - Size 4.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 5 Details In Rc , Endotracheal Tube, Cuff - Size 6 (Details In Rc) , Endotracheal Tube, Cuff - Size 7 (Details In Rc) , Endotracheal Tube, Cuff - Size 7.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 8 (Details In Rc) , Endotracheal Tube, Cuff - Size 8.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 9 (Details In Rc) , Endotracheal Tube, Cuff- Size 6.5 (Details In Rc) , Endotracheal Tube, Cuffed - Size 4 (Details In Rc) , Endotracheal Tube, Plain - Size 2.5 (Details In Rc) , Endotracheal Tube, Plain - Size 3 (Details In Rc) , Endotracheal Tube, Plain - Size 3.5 (Details In Rc) , Endotracheal Tube, Plain - Size 4 (Details In Rc) , Endotracheal Tube, Plain - Size 4.5 (Details In Rc) , Endotracheal Tube, Plain - Size 5 (Details In Rc) , Endotracheal Tube, Plain - Size 5.5 (Details In Rc) , Endotracheal Tube, Plain - Size 6 (Details In Rc) , Endotracheal Tube, Plain - Size 7 (Details In Rc) , Endotracheal Tube, Plain - Size 7.5 (Details In Rc) , Endotracheal Tube, Plain - Size 8 (Details In Rc) , Endotracheal Tube, Plain - Size 8.5 (Details In Rc) , Endotracheal Tube, Plain -Size 6.5 (Details In Rc) , Face Mask, Disposable(Details In Rc) , Foldable Intra Ocular Lense With Injector (Details In Rc) 11 To 17.5 , Foldable Intra Ocular Lense With Injector (Details In Rc) 18 To 24 , Foldable Intra Ocular Lense With Injector (Details In Rc) 24.5 To 28.5 , Foleys Catheter No. 14 (Detail In Rc) , Gloves Size 6.5 Inches,Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 6.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 .5Inches,Powder Free (Disposablesterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 Inches,Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Infant Feeding Tube Size 10Fg(Details In Rc) , Infant Feeding Tube Size 5Fg(Details In Rc) , Infant Feeding Tube Size 8Fg(Details In Rc) , Infusion Set With Microdrip,(I.V.)Sterile Disposable(Details In Rc) , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conforn To Is 12227 , K Wire, Length 375 Mm; 1.6Mm(Details In Rc) , K Wire, Length 375 Mm; 1.8Mm(Details In Rc) , K Wire, Length 375 Mm; 1Mm(Details In Rc) , Mucus Extractor Sterile(Details In Rc) , Nasal Oxygen Set, Twin Bore All Sizes Adult (Details In Rc) , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics (Details In Rc) , Nelaton Catheter Size 14 Fg(Detail In Rc) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2/0 1/2 Circle Taper Cut,17Mm Double Armed Needle,Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2-0 1/2 Circle Taper Cut,25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2/0(3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(1/2 Cir Rb Needle 20Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With Size 3/0 1/2 Circle Tapercut Double Needle 25Mm,Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1(1/2 Cir Rb Heavy Needle 45Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1/0(1/2 Cir Rb Needle 30Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Cir Rb Needle 30Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0(1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0(3/8 Cir Cutting Needle 25Mm Length 45 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Cir Tapercut Double Needle 17Mm Length 70 Cm)(Detail In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Circle Tapercut 13Mm Double Needle 70Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb Double Needle 17Mm Length 90 Cm)(Detail In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(3/8Cir Rb 16 Mm Needle, Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 10/0 (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 8/0 (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 1/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 2/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 3/0 (3/8 Conventional Cutting Needle 16Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 4/0 (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2/0 (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/ Blue Size 4/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/Blue Size 2/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm)(Detail In Rc) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 4/0(1/2 Cir Rb Needle 16 Mm Length 70 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 5/0 (1/2 Circle Cc 13Mm Needle, Suture Length Of 70Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8Cir Rb Taper Point Double Needle 9.3Mmlength 60 Cm)/(3/8Cir Rb 16 Mm Needle,Length 90 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 7/0 (3/8Cir Rb Double 8Mm Needle, Length 60 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 8/0 (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) , Non Absorbable Surgical Suture,Sterilised Needled Polyamide Monofilament Black (Nylon)Size 5/0(3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) , Oxygen Mask (Adult) , Oxygen Mask (Pediatric) , Paper Adhesive Plaster 1 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use)Sterile Disposable(Details In Rc) , Perfusion Set With Airway And Needle,(Adult Use) Sterile Disposable(Details In Rc) , Plaster Of Paris Bandage 10Cm X 2.7Mts , Plaster Of Paris Bandage 15Cm X 2.7 Mts/Roll , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Pressure Monitoring Line / High Pressure Extension Line (Details In Rc) , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large (Details In Rc) , Rubber Examination Gloves, Non-Sterile, Extra Small(Details In Rc) , Rubber Examination Gloves,Size Medium (Details In Rc) , Rubber Examination Gloves,Size Small (Details In Rc) , Ryles Tube / Nasogastric Tube Size: 10(Details In Rc) , Ryles Tube / Nasogastric Tube Size: 12(Details In Rc) , Ryles Tube / Nasogastric Tube Size: 16 (Details In Rc) , Ryles Tube / Nasogastric Tube Size: 18 (Details In Rc) , Ryles Tube / Nasogastric Tube Size:14 (Details In Rc) , Sanitary Napkin Beltless With Wings (Details In Rc) , Sanitary Napkin Beltless(Details In Rc) , Sanitary Pads Belt Type(Details In Rc) , Scalp Vein Set (Disposable) Size 18G (Details In Rc) , Scalp Vein Set (Disposable) Size 20G (Details In Rc) , Scalp Vein Set (Disposable) Size 22G (Details In Rc) , Scalp Vein Set (Disposable) Size 24 G (Details In Rc) , Skin Graft Knife Blade (Sterile) & Handle(Details In Rc) , Standard Pama Intra Ocular Lenses (Details In Rc) 11 To 17.5 , Standard Pama Intra Ocular Lenses (Details In Rc) 18 To 24 , Standard Pama Intra Ocular Lenses (Details In Rc) 24.5 To 28.5 , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port Size 24G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 26G (Details In Rc) , Sterile Disposable (Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.) Size 18G (Details In Rc) , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1/2 Inch (Details In Rc) , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1/2 Inch (Details In Rc) , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm(Details In Rc) , Suction Catheter, Sterile. Size: F G-10 (Details In Rc) , Suction Catheter, Sterile. Size: F G-12 (Details In Rc) , Suction Catheter, Sterile. Size: F G-14 (Details In Rc) , Suction Catheter, Sterile. Size: F G-16 (Details In Rc) , Suction Catheter, Sterile. Size: F G-18 (Details In Rc) , Suction Catheter, Sterile. Size: F G-20 (Details In Rc) , Suction Catheter, Sterile. Size: F G-22 (Details In Rc) , Suction Catheter, Sterile. Size: F G-6 (Details In Rc) , Suction Catheter, Sterile. Size: F G-8 (Details In Rc) , Suction Catheter, Sterile.Size: Fg 5 (Details In Rc) , Surgical Blade Sterile, Size 11(Details In Rc) , Surgical Blade Sterile, Size 15(Details In Rc) , Surgical Blade Sterile, Size 22(Details In Rc) , Surgical Cap Disposable (For Surgeons)(Details In Rc) , Surgical Cap, Disposable (For Nurses) (Details In Rc)(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 11-15(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 1-5(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 16-20(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 6-10(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Cutting Size 6-10(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Size 11-15(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Size 16-20(Details In Rc) , Suture Needles Curved And Cutting Size 1-5(Details In Rc) , Syringe 10 Ml Hypodermic With Needle Attached 22G,Sterile,Single Use Disposable(Details In Rc) , Syringe 2 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Syringe 20 Ml Hypodermic With Needle Attached 22G,Sterile,Single Use Disposable(Details In Rc) , Syringe 5 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Syringe 50 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Temporary Cardiac Pacing Wire (Electrode) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Tracheostomy Tube (Pvc), Cuffed - All Sizes(Details In Rc) , Tracheostomy Tube, Plain - All Sizes(Details In Rc) , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- (Details In Rc) , Umbilical Catheter For New Born, All Sizes -(Details In Rc) , Umbilical Cord Clamp (Details In Rc) , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml (Details In Rc) , Urethral Catheter 90[ S107 ] , Urethral Catheter 91[ S108 ] , Urine Collecting Bag, Disposable 2000 Ml(Details In Rc) , Nasal Pronge Neonatal [ S126 ] , Pampers(Sanitary Pads For Kids) 0 Size , Composite Filling Instrument (Api) , Elevators (Api) , Cryer (Api) , Straight (Api) , Grooved (Api) , Tooth Extraction Forceps Kit Upper , Tooth Extraction Forceps Kit Lower , Luxators , Mouth Mirror , Probe , Twizzer , Third Molar Forcep Upper , Third Molar Forcep Lower , Gic Filling Instrument (Api) , Diamond Bur Ball Round(Mani) , Diamond Bur Straight (Mani) , Diamond Bur Taper Fissure (Mani) , Diamond Bur Inverted Cone (Mani) , Diamond Bur Ocelusal Reduction Bur (Mani) , Carbide Bur Round (Mani) , Carbide Bur Straight Fissure(Mani) , Bone Cutting Bur (Mani) , Chisel Unibevol (Api) , Mallet (Teflon Coated) (Api) , Periosteal Elevator (Api) , Bone File (Api) , Artery Forecep , Niddle Holder , Scissors (Small) , Monn’S Probe , Surgical Curette , Gic Filling Material (Gc9) (Gc) , Root Canal Selant (Zno Base) (Amdent) , Endodontick File (15-40) 21 Mm (Mani) , Endodontick File (15-40) 25 Mm (Mani) , Endodontick File (45-80) 28 Mm , G.P Point 2% (15-40)(Densply) , G.P Point 2% (45-80) (Densply) , Zinc Oxide Powder (100 Gm) , Eugenol 100 Ml , Calcium Hydroxide Paste 2 Gm , Edta Paste 2 Gm , B.P Knife Handle , Iodoform50 Gm. , Silver Alloy30 Gm. , Mercury 30 Gm. , Scissors (Large) , Bone Ronger , Bone Curette , Bone Chiesal , Tissue Forecep , Explorer , Cement Spatula , Amalgum Carrier , Amalgum Condenser , Composite Material , Instrument Sterilizer , Stericlav 15 Ltr
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
10.
Health and Family Welfare #9054733 Technical Bid
Supply Of Medicinal For Life Line Drug Store And Hospital Patient In Govt. Hospital At Hindaun City , Medician Drug Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg , Acenocoumarol Tab Ip/ Nicoumalone Tab Ip 2 Mg , Acetazolamide Tab Ip 250Mg , Acetylcystine Solution Usp (Injection) 200 Mg/Ml , Act Kit Containing 3 Tablets Of Artesunate(100 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(750Mg+37.5Mg) , Act Kit Containing 3 Tablets Of Artesunate(150 Mg Each) And 2 Tablet Of Sulphadoxine And Pyrimethamine(500Mg+25Mg) , Act Kit Containing 3 Tablets Of Artesunate(25Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(250Mg+12.5Mg) , Act Kit Containing 3 Tablets Of Artesunate(50 Mg Each) And 1 Tablet Of Sulphadoxine And Pyrimethamine(500Mg+25Mg) , Acyclovir Cream 5% , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Acyclovir Oral Suspension Ip 400Mg/5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Adenosine Injection 6 Mg/2Ml , Adrenaline Injection Ip 1Mg/Ml Im/Iv Use , Albendazole Oral Suspension Ip 400 Mg/10Ml , Albendazole Tablets Ip 400 Mg(Detail In Rc) , Alendronate Sodium Tablets Usp / Bp 35 Mg , Allopurinol Tablets Ip 100 Mg , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amikacin Inj Ip 100 Mg 2Ml Vial , Amikacin Inj Ip 250 Mg 2Ml Vial , Amikacin Inj Ip 500 Mg 2Ml Vial , Aminophylline Inj Ip 25 Mg/Ml 10 Ml Vial , Amiodarone Hydrochloride Inj 50 Mg/Ml , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amitriptyline Tab Ip 25Mg Film Coated , Amlodipine And Atenolol Tablet (Amlodipine Besilate Equivalent To Amlodipine 5Mg,Atenolol 50Mg) , Amlodipine And Enalapril Maleate Tablets (Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To , Lisinopril (Anhydrous) 5 Mg , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg/5 Ml (30Ml Bottle) , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mgg , Amoxycillin Oral Suspension Ip (Dry Syrup) 125 Mg/5Ml 30 Ml Bottle. , Amphotericin B Inj Ip 50 Mg , Ampicillin Cap Ip 500Mg , Ampicillin Injection Ip 500 Mg , Antacid Liquid,Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Antacid Tablets.Formula,Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Anti A Blood Grouping Serum Ip(Anti A Monoclonal Serum) , Anti B Blood Grouping Serum Ip(Anti B Mono Clonal Serum) , Anti D(Rh) Blood Grouping Serum Ip/Anti D Blood Grouping Serum Ip , Anti Inhibitor Coagulation Complex (Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial) , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg (30 Ml Bottle). , Artemether And Leumefantrine Tablet (40 Mg And 240 Mg) , Artemether And Leumefantrine Tablet (80 Mg And 480 Mg) , Artesunate Injection 60 Mg (I.M. I.V.Use) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O/O W/V (1Ml Ampoule),Sodium Chloride Injection Ip 0.9O/O W/V (5Ml Ampoule) , Ascorbic Acid Tab Ip 500 Mg , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab (Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg) , Aspirin Tablet Ip (Gastro-Resistant) 150 Mg , Atenolol Tab Ip 25 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Atorvastatin Tablets Ip 40 Mg , Atracurium Inj 10 Mg/Ml , Atropine Eye Ointment Ip 1% (3 Gm. Tube) , Atropine Sulphate Injection 0.6Mg/Ml , Atropine Sulphate Ophthalmic Solution Usp 1% (5 Ml.) , Azathioprine Tab Ip 50 Mg , Azithromycin Tab 100 Mg Dispersible Tabs (3 Tab Strip 10X3x3) , Azithromycin Tab Ip 500 Mg , Azithromycin Tablets Ip 250Mg , Aztreonam Injection 1Gm , Aztreonam Injection Usp 500 Mg , Beclomethasone Inhalation Ip 200 Mcg/Dose , Beclomethasone, Neomycin And Clotrimazole Cream (Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 %)(10 Gm. Tube) , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Betahistine Tab Ip 16 Mg , Betahistine Tab Ip 8 Mg , Betamethasone Dipropionate Cream Ip 0.05% (15 Gm. ) , Betamethasone Lotion Ip 0.05 O/O , Betamethasone Sod Phos Inj Ip 4Mg/Ml , Betamethasone Tab Ip 0.5Mg , Betaxolol Eye Drops 0.5 O/O , Biphasic Isophane Insulin Inj Ip (30 % Soluble Insulin And 70 % Isophane Insulin) Inj. 40 Iu/Ml(R-Dna Origin) , Bisacodyl Tab Ip 5 Mg , Black Disinfectant Fluid (Phenyl) As Per Schedule O Grade Iii5 Ltr Can , Bleomycin Injection Ip 15Mg (Bleomycin Sulphate Injection 15 Units) , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Bromocriptine Tablets Ip 2.5 Mg , Budesonide Nebulizer Suspension 0.25Mg/Ml , Budesonide Powder For Inhalation 200 Mcg , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg (4 Ml.) , Bupivacaine Inj Ip 0.5% (20 Ml.) , Calamine Lotion Ip 100Ml , Calcitriol Capsules Ip 0.25 Mcg , Calcium And Vitamin D3 Suspension (Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Calcium Gluconate Inj Ip 10% (Iv Use) (10Ml. Vial) , Calcium With Vitamin D Tablets Usp /Calcium And Colecalciferol Tablets Bp/Calcium And Vitamin D3 Tablets Ip(Elemental Calcium 500 Mg, Vitamin D3-250 Iu) (Non-Chewable) , Carbamazepine Oral Suspension Usp 100 Mg/5Ml , Carbamazepine Tab Ip 100 Mg (Film Coated) , Carbamazepine Tab Ip 200 Mg (Film Coated) , Carbimazole Tabs Ip 5 Mg (Film Coated) , Carboplatin Injection 150 Mg , Carboplatin Injection 450 Mg , Carboprost Tromethamine Injection Each Ml Contains Carboprost 0.25 Mg/Ml , Carboxymethylcellulose Eye Drops 0.5% (10 Ml. Drop) , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg/Ml (Paediatric Drops) , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj (Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm)(Im/Iv Use) , Cefotaxime Inj Ip 250 Mg , Cefotaxime Injection 1 G , Cefpodoxime Dispersible Tab 50 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G /Vial , Ceftriaxone Inj Ip 250 Mg/Vial , Ceftriaxone Inj Ip 500Mg/Vial , Cefuroxime Axetil Tab Ip 250 Mg , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Cephalexin Oral Suspension Ip (Cephalexin Dry Syrup Ip) 125Mg/ 5 Ml (30 Ml.) , Cephalexin Tablets 125 Mg (Dispersible Tablets) , Ceruminolytic Drops (Wax Dissolving Ear Drops) Paradichlorobenzene 2 O/O , Benzocaine 2.7 O/O , Chlorbutol 5 O/O, Turpentine Oil 15 O/O (10 Ml.) , Cetirizine Syrup Ip 5Mg/5 Ml (30 Ml.) , Cetirizine,Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg,Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetrimide Cream Ip 15 Gm , Chlorambucil Tab Ip 5 Mg , Chloramphenicol Eye Drops Ip 0.5 0/0 , Chlordiazepoxide Tablets Ip 10Mg , Chlorhexidine Gluconate Solution 5% 250 Ml , Chlorhexidine Mouthwash Ip/Bp 0.2 O/O (50 Ml.) , Chloroquine Phosphate Inj Ip 40 Mg/ Ml , Chloroquine Phosphate Suspension Ip 50 Mg/5Ml (60 Ml.) , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated , Chlorpheniramine Maleate Tab Ip 4Mg , Chlorpromazine Inj. Ip 25Mg/Ml , Chlorpromazine Tablets Ip 100 Mg (Coated Tablet) , Chlorpromazine Tablets Ip 25 Mg (Sugar Coated) , Chlorpromazine Tablets Ip 50 Mg (Coated Tablets) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets (Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg) , Cholecalciferol Granules 60,000 Iu /Gm , Cinnarizine Tablet Ip 75 Mg , Cinnarizine Tablets Ip 25 Mg , Ciprofloxacin 0.3 O/O And Dexamethasone 0.1 O/O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp (5 Ml.) , Ciprofloxacin Eye Drops 0.3 O/O W/V (5 Ml.) , Ciprofloxacin Injection Ip 200Mg/100Ml , Ciprofloxacin Ophthalmic Ointment Usp 0.3% (5 Gm.) , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Cisplatin Inj Ip 10 Mg/10 Ml , Cisplatin Inj Ip 50 Mg/ 50 Ml , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Clindamycin Phosphate Gel Usp 1 O/O (20 Gm.) , Clobazam Tablet/Capsule 10 Mg , Clobazam Tablet/Capsule 5 Mg , Clobetasol Propionate Cream 0.05 O/O (20 Gm.) , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Clonazepam Tablet 0.5 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Clopidogrel Tab Ip 75 Mg , Clotrimazole 1 O/O With Beclomethasone Dipropionate 0.025 O/O Ear Drops (5 Ml.) , Clotrimazole Cream Ip 2% W/W (15 Gm.) , Clotrimazole Mouth Paint (Clotrimazole 1 O/O W/V) (15 Ml.) , Clotrimazole Vaginal Tab Ip 500Mg , Cloxacillin Sodium Inj Ip 500Mg , Coal Tar 6% & Salicylic Acid 3% Ointment , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O/O + Salicylic Acid 3 O/O , Compound Benzoin Tincture Ip , Compound Sodium Lactate Inj. Ip , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Conjugated Estrogen Tabs Usp 0.625 Mg. , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg (50 Ml.) , Co-Trimoxazole Tablet (Trimethoprim 160Mg+Sulphamethoxazole 800Mg) , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg,Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg,Menthol 0.5 Mg, Syrup Q.S. (50Ml.) , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cyclosporin Capsule Usp/Ip 50 Mg , Cytarabine Injection Bp 500Mg , Dacarbazine Injection 500 Mg Usp/ Bp , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Dental Gel Choline Salicylate 8.7 O/O, Benzalkonium Chloride 0.01 O/O, Lignocaine Hcl 2 O/O (Flavoured Gel Base) (10 Gm.) , Desferrioxamine Injection Ip 500 Mg / Vial (For I.M. Inj And I.V S.C. Infusion) , Dexamethasone Inj Ip 8Mg/2Ml , Dexamethasone Tab Ip 0.5 Mg , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml (30 Ml.) , Dextrose Inj Ip 10% (500 Ml.) , Dextrose Inj Ip 25% W/V(100 Ml.) , Dextrose Inj Ip 5% (500 Ml.) , Diagnostic Sticks For Multiple Use Strip (Sugar, Ketone, Albumin) , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% (Iodine Conc.= 292 Mg/Ml) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W/V (Iodine = 370 Mg/Ml) , Diazepam Inj Ip 10Mg/2Ml (1M/Iv Use) , Diazepam Tab Ip 5 Mg , Diclofenac Gastro Resistant Tablet Ip 50 Mg(Enteric Coated) , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% (20 Gm.) , Diclofenac Sod + Paracetamol Tablets Diclofenac Sod 50 Mg + Paracetamol 325 Mg , Diclofenac Sodium Inj Ip 25 Mg/ Ml (Im/Iv Use) (3 Ml.) , Diclofence Prolonged Release Tablet Ip 100 Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg (10 Ml With Droper) , Dicyclomine Hydrochloride Oral Solution Ip 10Mg /5Ml , Dicyclomine Inj Ip 10 Mg /Ml , Dicyclomine Tab Ip 10 Mg , Diethylcarbamazine Tab Ip 100 Mg , Digoxin Inj Ip 0.25 Mg/Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dinoprostone Cream/ Gel 0.5 Mg Dinoprostone In Syringe , Diphtheria Antitoxin 10000 Iu , Dobutamine Inj Ip/Bp 50Mg/Ml/250Mg (Vial/)Dobutamine Inj Usp250 Mg/5Ml(Amp) , Domperidone Oral Drops 10Mg/ Ml (10Ml) , Domperidone Suspension Ip 5Mg/5Ml , Domperidone Tab Ip 10 Mg , Dopamine Hydrochloride Inj 40 Mg/Ml (5 Ml. Vial) , Doxorubicin Inj Ip 50 Mg/ 25 Ml , Doxycycline Cap Ip 100 Mg , Dried Factor Viii Fraction Ip (Iv Use) 1000 Iu/Vial , Dried Factor Viii Fraction Ip (Iv Use) 500 Iu/Vial , Dried Human Anti Haemophlic Fraction Ip (Dried Factor Viii Fraction Ip) 250 Iu/ Vial (Iv Use) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Drotaverine Hydrochloride Inj 40 Mg/2 Ml Vial , Drotaverine Tab Ip 40 Mg , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate(200 Mg Each) And 2 Tablet Of Sulphadoxine Pyrimethamine(750Mg+37.5Mg)Each Or 3 Tablets Of Sulphadoxine Pyrimethamine(500+25)Mg , Enalapril Maleate Tab Ip 2.5Mg , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tablets Ip 10 Mg , Enoxaparin Sodium Inj Ip 60 Mg , Escitalopram Tab Ip 10 Mg , Ethamsylate Inj 250 Mg/ 2Ml (Im/Iv) , Ethinyloestradiol Tabs Ip 50 Mcg , Etoposide Inj Ip 100 Mg , Etoricoxib Tab Ip 120Mg , Etoricoxib Tablet 90 Mg , Factor Ix Concentrate (Purified) 600 I.U.(Human Coagulation Factor Ix) , Fenofibrate Capsules/ Tab Ip 200 Mg , Fentanyl Citrate Injection 50Mcg/Ml , Fentanyl Citrate Injection Ip 2 Ml , Ferrous Sulphate With Folic Acid Tab (Paediatric) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Filgrastim Injection (Granulocyte Colony Stimulating Factor) (Sc/Iv Use) 300 Mcg , Finasteride Tablets Ip 5 Mg , Flavoxate Tablets Ip/Bp 200 Mg (Coated Tablet) , Fluconazole Eye Drops 0.3% (5 Ml.) , Fluconazole Tablets Ip 150Mg , Flunarizine Tab 5 Mg , Fluorouracil Inj Ip 250 Mg/ 5Ml , Fluoxetine Cap Ip 20 Mg , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O/O W/V (5 Ml.) , Folic Acid Tab Ip 5 Mg , Formaldehyde Solution (34.5 Per. - 38 Per.) (450Ml.) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Framycetin Sulphate Cream 1 O/O 100 Gm Pack , Framycetin Sulphate Cream 1 O/O 30Gm Pack , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg/Ml (Im And Iv Use) (2 Ml.) , Fusidic Acid Cream Ip 2% (10 Gm.) , Gabapentine Tablet/Capsule 100Mg , Gabapentine Tablet/Capsule 300Mg , Gadodiamide Inj. 0.5Mml/Ml Vial , Gamma Benzene Hexachloride Lotion 1%(Lindane Lotion Usp) 100Ml. , Gemcitabine For Injection 1Gm , Gemcitabine For Injection 200 Mg , Gentamycin Injection Ip 80Mg/2Ml (Im/ Iv Use) (2 Ml.) , Gentian Violet Topical Solution Usp 1O/O , Glibenclamide And Metformin Hydrochloride (Sr) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg (Sustained Release) , Glibenclamide Tab Ip 5 Mg , Gliclazide And Metformin Tablets (Gliclazide 80 Mg And Metformin Hcl 500 Mg) , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 1Mg , Glimepiride Tab Ip 2 Mg , Glimepiride, Pioglitazone And Metformin Hydrochloride (Sustained Release) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride (Sustained Release) 500 Mg , Glipizide And Metformin Hydrochloride Tablets Usp (Glipizide 5 Mg, Metformin Hydrochloride 500 Mg) , Glipizide Tab Ip 5Mg , Glucagon For Injection Usp 1 Mg/Ml , Gluteraldehyde Solution 2% , Glycerin Ip 100 Ml , Glycerin Ip 400 Gm , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Glycopyrrolate Inj Usp 0.2 Mg/Ml (1 Ml.) , Griseofulvin Tab Ip 125 Mg , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% (15 Ml.) , Haloperidol Inj Ip 5 Mg/Ml (1 Ml. Vial) , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Halothane Bp , Heparin Sodium Inj Ip 5000 Iu/Ml (Im/Iv Use) , Homatropine Eye Drops Ip 2% (5 Ml.) , Human Albumin Solution Ip 20% (100 Ml.) , Human Anti D Immunoglobulin 150 Mcg , Human Anti D Immunoglobulin Injection 300Mcg (Im Use) , Human Rabies Immunoglobulin Inj 150 Iu/ Ml , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Hydrochlorthiazide Tab Ip 12.5 Mg , Hydrochlorthiazide Tab Ip 25Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial (Im/Iv Use) , Hydrogen Peroxide Solution Ip 6 O/O (20 Vol) (450 Ml) , Hydroxychloroquine Sulphate Tablets 200Mg , Hydroxyethyl Starch (130/0.4) 6 O/O W/V With Sodium Chloride 0.9 O/O W/V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion (500 Ml) , Hydroxyprogesterone Inj Ip 250Mg /Ml (1 Ml) , Hydroxypropylmethyl Cellulose Solution 20 Mg/ Ml , Hydroxyzine Tab Ip 25 Mg , Hyoscine Butyl Bromide Tablets Ip 10Mg , Hyoscine Butylbromide Inj Ip 20 Mg/ Ml , Ibuprofen And Paracetamol Tablets Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Oral Suspension Bp /Usp 100 Mg/ 5 Ml (60 Ml) , Ibuprofen Tab Ip 200 Mg (Coated) , Ibuprofen Tab Ip 400 Mg (Coated) , Ifosfamide Injection Ip/Bp/Usp 1Gm , Imatinib Tab 400Mg , Imipramine Tab Ip 25 Mg (Coated Tab) , Imipramine Tab Ip 75 Mg (Coated) , Indomethacin Cap Ip 25 Mg , Insulin Glargine 100Iu/Ml 3 Ml Vial , Insulin Glargine 100Iu/Ml 5Ml Vial , Insulin Injection Ip (Soluble Insulin/Neutral Insulin Injection)40 Iu/Ml(R.Dna Origin) , Iohexol Usp (Solution For Injection) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine/Ml , Iohexol Usp(Solution For Injection) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine/Ml. , Ipratropium Bromide Nebulizer Solution 250 Mcg/ Ml , Ipratropium Powder For Inhalation Ip 40 Mcg , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg (100 Ml) , Iron Sucrose Injection Usp/Bp 20Mg/Ml (For Iv Use) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg (10 Ml) , Isoflurane Usp , Isophane Insulin Inj Ip 40 Iu /Ml , Isoprenaline Injection Ip 2Mg / Ml , Isosorbide Dinitrate Tab Ip 5 Mg (15 Gm) , Isosorbide Mononitrate Tabs Ip 20 Mg , Isoxsuprine Inj Ip 5 Mg/Ml , Isoxsuprine Tab Ip 20 Mg , Itraconazole Cap 100 Mg , Ketamine Inj Ip 50 Mg/Ml , Ketoconazole Cream 2% (15 Gm) , Labetalol Hcl Inj Ip 20Mg/4Ml , Labetalol Tab Ip 100Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp/Bp 10Gm/15Ml Or 3.35 Gm/5Ml (100 Ml) , L-Asparaginase Inj 10000 Iu , Leflunomide Tablets Ip/Usp 10Mg(Film Coated) , Leflunomide Tablets Ip/Usp 20Mg (Film Coated) , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg /Ml , Levetiracetam Injection 500Mg/5Ml , Levetiracetam Oral Suspension 100Mg/Ml , Levetiracetam Tablet 500 Mg , Levoceitrizine Tablet 5Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levofloxacin Tablets Ip 250 Mg , Lidocaine Hcl Topical Solution Usp 4% , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg (30 Ml) , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose (Monohydrate) 75 Mg , Lignocaine Gel Ip 2% (30 Gm) , Lignocaine Inj Ip 2% (30 Gm) , Lignocaine Ointment 5 O/O , Linezolid Inj 200Mg/100Ml , Linezolid Tablets Ip 600 Mg , Liquid Paraffin Ip 100 Ml , Liquid Paraffin Ip 400 Ml , Lisinopril Tab Ip 2.5 Mg , Lisinopril Tab Ip 5 Mg , Lisinopril Tablets Ip 10 Mg , Lithium Carbonate Tab Ip 300 Mg , Loperamide Tab Ip 2 Mg , Lorazepam Inj 2 Mg/Ml , Losartan Potassium And Amlodipine Tablets Ip (Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg) , Losartan Potassium And Hydrochlorothiazide Tablets Ip(Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg) , Losartan Tab Ip 25 Mg , Losartan Tab Ip 50 Mg , Lysol (Cresol With Soap Solution) Ip (Cresol 50 O/O + Soap 50 O/O) (5 Ltr. Can) , Magnesium Sulphate Inj. 50Mg/Ml (50%W/V) , Mannitol Inj Ip 20% W/V (100 Ml) , Mannitol With Glycerin Injection 10 O/O + 10 O/O W/V (For Intravenous Infusion) , Mecobalamin Inj 500 Mcg/Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Mefenamic Acid Tablets Bp 500 Mg , Mefloquine Tablets Ip 250 Mg , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Meropenem Inj Ip 500 Mg , Meropenem Inj. Ip 1Gm , Metformin Hcl (Sustained Release) And Glimepiride Tab Metformin Hcl (Sustained Release) 500Mg ,Glimepiride 1Mg , Metformin Hydrochloride (Sustained Release) And Glimepiride Tablets (Metformin Hydrochloride(Sustained Release) 500 Mg, Glimipiride 2Mg) , Metformin Hydrochloride(Sustained Release Tablets Ip 1000 Mg , Metformin Tab Ip 500 Mg(Film Coated) , Methotrexate Inj Ip 50 Mg/2 Ml , Methotrexate Tab Ip 2.5 Mg , Methotrexate Tablets Ip 10 Mg , Methyl Cobalmine Tablet 1500Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Methyldopa Tab Ip 250Mg Film Coated , Methylergometrine Inj Ip 0.2 Mg/Ml , Methylergometrine Tab Ip 0.125 Mg , Metoclopramide Hydrochloride Syrup Ip 5 Mg/ 5Ml , Metoclopramide Inj Ip 10Mg/2Ml , Metoclopramide Tab Ip 10 Mg , Metoprolol Succinate Extended Release Tablets Ip/Usp 50 Mg , Metoprolol Tablets Ip 25 Mg , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel (10 Gm) , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base/5Ml , Metronidazole Inj Ip 500 Mg/100Ml , Metronidazole Tablets Ip 200 Mg (Film Coated) , Metronidazole Tablets Ip 400 Mg (Film Coated) , Miconazole Nitrate Cream Ip 2% (15 Gm) , Midazolam Inj Ip 1 Mg/Ml , Mifepristone Tab Ip 200Mg , Misoprostol Tab Ip 200 Mcg , Mitomycine Injection Ip 10 Mg/Mitomycine For Injection Usp 10 Mg , Montelucast(10Mg) + Levocetrizine Tablet (5Mg) , Morphine Sulphate Inj Ip 10Mg/Ml , Multiple Electrolytes And Dextrose Injection Type I Ip (Electrolyte P Injection ) , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg (15 Ml) , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Naloxone Inj Ip 0.4Mg/ Ml , Naproxen Tablet Ip 250Mg , Naproxen Tablet Ip 500Mg , Neomycin Bacitracin And Sulphacetamide Power (Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg) (10 Gm) , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Neostigmine Inj Ip 0.5 Mg/Ml , Neostigmine Injection Ip 2.5Mg/5Ml , Neostigmine Tab Ip 15 Mg , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg (Sustained Release) , Nitrofurantoin Tab Ip 100Mg , Nitroglycerin Inj 5 Mg/ Ml , Noradrenaline Injection Ip 2 Mg/Ml , Norethisterone Tab Ip 5 Mg , Norfloxacin Tab Ip 400Mg Film Coated , Normal Human Intravenous Immunoglobulin 5G/100Ml , Octreotide Injection 50 Mcg/Ml , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml(In Nacl Inj) , Ofloxacin Oral Suspension Ip 50Mg/ 5Ml (30 Ml) , Ofloxacin Tab Ip 200 Mg , Ointment Containing Lidocaine Ip 3 O/O Zinc Oxide Ip 5 O/O , Hydrocortisone Ip 0.25 O/O, Allantoin Ip 0.5 O/O , Olanzapine Tab Ip 5 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg/Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Ors Powder Ip , Oseltamivir Capsule Ip 30 Mg (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg) , Oseltamivir Capsule Ip 45 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg) , Oseltamivir Capsule Ip 75 Mg Capsule(Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg/Ml (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg/Ml (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Oxaliplatin Injection Usp 50 Mg , Oxytocin Inj Ip 5 Iu/Ml , Paclitaxel Inj Ip 100 Mg , Paclitaxel Inj Ip 260 Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip(Each Ml Contains Paracetamol 150Mg) (15 Ml) , Paracetamol Inj. 150 Mg/Ml , Paracetamol Syrup Ip 125 Mg/5Ml (Detail In Rc) (60 Ml) , Paracetamol Tab Ip 500 Mg , Pentazocine Inj Ip 30Mg/Ml (Im/Iv Use) , Pentoprazole Inj 40 Mg , Peritonial Dialysis Solution Ip , Permethrin Cream 5% , Permethrin Lotion 5% , Pheniramine Inj Ip 22.75Mg /Ml , Phenobarbitone Inj Ip 200Mg/Ml (1 Ml) , Phenobarbitone Tab Ip 30 Mg , Phenylephrine Hydrochloride Opthalmic Solution Usp/Phenylephrine Eye Drops Bp 5% , Phenytoin Injection 50Mg/Ml , Phenytoin Oral Suspension Ip 25Mg/Ml , Phenytoin Tab Ip 100 Mg (Film Coated) , Pilocarpine Eye Drops Ip 2 O/O , Pioglitazone Tab Ip 15 Mg , Piperacillin + Tazobactum For Injection Usp 4Gm+500Mg , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Potassium Chloride Inj. 0.15 Gm/Ml , Potassium Chloride Oral Solution U.S.P 500Mg/ 5Ml , Povidone Iodine Ointment 5% 15 Gm , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O/O W/V Povidone Iodine (Suitable For Hand Wash) (500 Ml) , Povidone Iodine Solution Ip 10 % (100 Ml) , Povidone Iodine Solution Ip 5 % 500 Ml , Povidone Iodine Solution Ip 5% 100Ml Bottle , Pralidoxime Chloride Injection Ip 25 Mg/Ml / 500 Mg , Prazosin Tablets (Extended Release) 2.5 Mg , Prednisolone Tab 20 Mg , Prednisolone Tab Ip 5 Mg , Prednisolone Tablet Ip 10 Mg , Pregabalin Cap Ip 75 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Progesterone Inj 200 Mg/ 2Ml , Promethazine Inj Ip 25Mg/Ml , Promethazine Syrup Ip 5 Mg/5Ml , Promethazine Tab Ip 25 Mg , Propofol Inj Ip/Bp/Usp 10 Mg/Ml , Propranolol Tab Ip 40 Mg , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Quetiapine Tablet Ip 25Mg , Quetiapine Tablet Ip 50Mg , Quinine Dihydrochloride Inj Ip 300 Mg/Ml , Quinine Sulphate Tablets Ip 300 Mg (Film Coated) , Rabies Antiserum Ip (Equine) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments (I.M./Sc Use) , Rabies Vaccine Human (Cell Culture) Ip (Intradermal) 2.5 Iu , Rabies Vaccine Human (Cell Culture) Ip (Intramuscular) 2.5 Iu/ Dose , Ramipril Tablets Ip 2.5 Mg , Ranitidine Hcl Injection Ip 50Mg/2Ml , Ranitidine Tab Ip 150Mg Film Coated , Ranitidine Tab Ip 300Mg Film Coated , Recombinant Coagulation Factor Viia 1Mg , Recombinant Coagulation Factor Viia 2Mg , Rh-Erythropoetin Inj 10000 Iu , Rh-Erythropoetin Inj 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Risperidone Tab 1 Mg , Risperidone Tab 2Mg , Salbutamol Inhalation 100 Mcg /Dose , Salbutamol Nebuliser Solution Bp 5 Mg/Ml (10 Ml) , Salbutamol Syrup Ip 2Mg/ 5Ml (100 Ml) , Salbutamol Tab Ip 2 Mg , Salbutamol Tablet Ip 4 Mg , Saline Nasal Solution (Drops) (Sodium Chloride 0.65 O/O) (10 Ml) , Sertraline Tab 50 Mg , Sevoflurane , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Snake Venum Anti Serum Ip (Lyophilized)Polyvalent Anti Snake Venum,Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum,0.45 Mg Of Common Kraite(Bungaras)Venum(Details In Rc) , Sodium Bicarbonate Inj Ip 7.5% W/V , Sodium Chloride And Dextrose Injection Ip 0.9 O/O + 5 O/O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O/O Disodium Hydrogen Phosphate Dodecahydrate 8 O/O , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Sodium Valproate Inj 100 Mg/ Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml (100 Ml) , Sodium Valproate Tablet(Gastro Resistant) Ip 500Mg , Spironolactone Tab Ip 25Mg , Spironolactone Tablets Ip 50 Mg , Streptokinase Injection 15 Lac Units , Succinylcholine Inj. Ip 50 Mg/Ml (Iv Use) , Sulfasalazine Delayed Release Tablets Usp / Gastroresistant Sulfasalazine Tablets Bp 500 Mg , Surfactant For Intratrecheal Instillation (Natural Bovine Lung Surfactant) , Surgical Spirit Ip/Bp (100 Ml) , Surgical Spirit Ip/Bp (500 Ml) , Tamoxifen Tab Ip 10 Mg , Tamsulosin Hcl Tablets/Capsule 0.4 Mg , Telmisartan Tablets Ip 40 Mg , Tenaligliptin Tablet 20Mg , Terazosin Tab Usp 1 Mg , Terazosin Tablets Usp 2 Mg , Terbutaline Tablets Ip 2.5 Mg , Tetanus Immunoglobulin 250 Iu/ Vial , Tetanus Vaccine (Adsorbed) Ip 5 Ml Vial , Theophylline And Etofylline Injection (Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg) , Theophylline And Etofylline Tablets (Theophylline Ip 23Mg + Etofylline Ip 77 Mg) , Theophylline Tablet 400Mg Sustained Release/ Controlled Release (Theophylline Prolonged Released Tablet Ip) , Thiamine Tablets Ip 100 Mg , Thiopentone Inj Ip 0.5 G , Thyroxine Sodium Tablets Ip 100Mcg , Thyroxine Tablets Ip 50 Mcg , Timolol Eye Drops Ip 0.5 O/O W/V , Tinidazole Tab Ip 300 Mg (Film Coated) , Tinidazole Tab Ip 500 Mg (Film Coated) , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O/O +0.1 O/O (5 Ml) , Tobramycin Eye Drops 0.3% [331] (5 Ml) , Tobramycin Ophthalmic Ointment Usp 0.3% (5 Gm) , Tooth Gel Sodium Monofluorophosphate 0.7 O/O And Potassium Nitrate 5 O/O (In Flavoured Base) (50 Gm) , Torsemide Inj 10 Mg/Ml , Torsemide Tab 10 Mg , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg/Ml , Tranexamic Acid Tablets Ip/Bp 500 Mg , Travoprost Eye Drops Ip 0.004 O/O (5 Ml) , Tretenoin Cream Usp 0.025% (20 Gm) , Trifluperazine Tab Ip 5 Mg Coated , Trihexyphenidyl Hcl Tab Ip 2 Mg , Tropicamide Eye Drop Ip 1O/O , Urokinase Injection 5 Lac Unit (Lyophilized) , Ursodeoxycholic Acid Tablets 300 Mg , Valethamate Bromide Inj 8Mg / Ml , Vancomycin For Intravenous Infusion Ip 1 Gm , Vancomycin For Intravenous Infusion Ip 500 Mg , Vdrl Antigen (With + Ve And - Ve Control) / Rpr Slide Kit , Vecuronium Bromide For Injection 4Mg (Freeze Dried) , Verapamil Tab Ip 40 Mg Film Coated , Vinblastine Inj Ip 10Mg/ 10Ml , Vincristine Inj Ip 1Mg(Vial)/Vincristin Injection Usp 1Mg/Ml (Amp) , Vitamin A Paediatric Oral Solution Ip(Vitamin A Concentrate Oil Ip)Each Ml Contains Vitamin A 100000 Iu (100 Ml) , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi (Prophylactic) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg (With Appropriate Overages) , Vitamin D3 Oral Solution 60000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. (Aqueous Solution) , Vitamin K-1 (Phytomenadione) 1Mg/0.5Ml Injection (Detail In Rc) , Warfarin Sodium. Tab Ip 5Mg , Water For Inj Ip , Xylometazoline Nasal Drops Ip 0.1% (5 Ml) , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Isoflurane Usp [7] , Lignocaine And Dextrose Injection Ip Each Mlcontains Lignocaine 50 Mg And Dextrose(Monohydrate) 75 Mg [11] , Indomethacin Cap Ip 25 Mg [436] , Etoricoxib Tab Ip 120Mg [495] , Etoricoxib Tablet 90 Mg [658] , Diclofenac Sodium Aqueous Injection 75Mg/ Ml 1Ml Size, Iv & Im Use [695] , Paracetamol Infusion Ip 1% W/V 100Ml Size [696 ] (100 Ml) , Ketorolac Tablet 10 Mg [697] , Baclofen Tablet Ip 10 Mg (Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) [698] , Tizanidine Hydrochloride Tablet Ip 2 Mg (Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg) [699] , Naloxone Inj Ip 0.4Mg/ Ml [51] , Gabapentine Tablet/ Capsule 100Mg [667] , Gabapentine Tablet/ Capsule 300Mg [668] , Divalproex Extended Release Tablet Ip 250 Mg (Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg) [702] , Ciprofloxacin Injection Ip 200Mg/100Ml [101] , Griseofulvin Tab Ip 125 Mg [117 , Ofloxacin Infusion Ip 200Mg / 100 Ml(In Nacl Inj) [522] , Cefadroxil Tablet 250 Mg [709] , Cefadroxil Tablet 500 Mg [710] , Levofloxacin Tablet Ip 500 Mg (Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg) [712] , Terbinafine Hydrochloride Tablet 250 Mg [722] , Azathioprine Tab Ip 50 Mg [133] , Methotrexate Tablets Ip 10 Mg [536] , Heparin Sodium Inj Ip 5000 Iu/Ml (Im/Iv Use) [174] , Ethamsylate Tablet Bp 500 Mg (Each Uncoated Coated Tablet Contains Ethamsylate Bp 500 Mg) [745] , Tranexamic Acid Injection Ip 100Mg/Ml 5Ml Size [747] , Digoxin Inj Ip 0.25 Mg/ Ml [189] , Dobutamine Inj Ip 50Mg /Ml/250Mg (Vial/) Dobutamine Inj Ip 250 Mg/5Ml(Amp) [192] , Nitroglycerin Inj 5 Mg/ Ml [205] , Fenofibrate Capsules/ Tab Ip 200 Mg [550] , Urokinase Injection 5 Lac Unit (Lyophilized) [557] , Powder Clotrimazole 1 % W/W 30 Gm [759] , Terbinafine Ointment 1 %W/W (10 Gm Tube) [760] , Mupirocin Cream Usp 2 % (Each Gram Contains 22.5 Mg Mupirocin Calcium Usp In A Mineral Oil Cream Base) 15 Gm Size [762] , Vdrl Antigen (With + Ve And - Ve Control) /Rpr Slide Kit [242] , Diagnostic Sticks For Multiple Use Strip (Sugar Ketone, Albumin) [673] , Diagnostic Strip For Glucose,Ketone [673A] , Diagnostic Strip For Glucose,Protein [673B] , Torsemide Inj 10 Mg/Ml [471] , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet (Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) [763] , Prochlorperazine Mesylate Injection12.5Mg/Ml 5Ml Size [764] , Probiotic Sachets 1 Gm Size (Each Gram Sachet Contains Saccharomyces Boulardii 250Mg &Lactic Acid Bacillus 150 Million Spores) [765] , Carbimazole Tabs Ip 5 Mg (Film Coated) [280] , Tenaligliptin Tablet 20Mg [682] , Hepatitis B Immunologlobin Injection Ip 100 I.U [767] , Eye Drop Moxifloxacin 0.5% W/V Ophthalmic Solution Ip5ml Size [770] , Isoxsuprine Inj Ip 5 Mg/ Ml [333] , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg (Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg) [772] , Human Chorionic Gonadotropin Injection Ip 5000 I.U. [774] , Zolpidem Tablet 5 Mg [779] , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg,Menthol 0.5 Mg,Syrup Q.S. [368] (50 Ml) , Formoterol Fumerate &Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg [616] , Cough Syrup/ Expectorant(50) Ml [692] (50 Ml) , Acebrophylline Tablet 100 Mg [780] , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection(I.V.) [382] , Sodium Chloride 0.45% W/V Polypack 500 Ml [782] , Tamsulosin Hcl Tablets/ Capsule 0.4 Mg [576] , Dutasteride Tablet 0.5 Mg [787] , Alkylizer Syrup 1.4 Gm/ 5 Ml ( 100 Ml ) (Disodium Hydrogen Citrate)[788] (100 Ml) , Betahistine Tab Ip 16 Mg [542] , Mecobalamin Inj 500 Mcg/Ml [624] , Multi Vitamin Syrup [790] , Flunarizine Tab 5 Mg [147] , Pregabalin Cap Ip 75 Mg [634] , Vitamin E Capsule 400 Mg [795] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 [R1] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 [R2] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 [R3] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 [R3] 76 Cm) Size -1/0 [R4] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suturechromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 [R5] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rbneedle 30 Mm Length 76 Cm) Size-2/0 [R6] , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 [R7] , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coatedpolyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size - 3/0 1/2Cir Rbneedle 20Mm Length 70Cm [R9] , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm [R16] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0 (1/2 Cir Rb Needle 20Mm, Length 76 Cm) [R20] , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 16 (Details In Rc) [S96.A] , Close Wound Drainage Device Under Negative Pressure (Closed Woundsuction Unit) Size Of Bellow 800 Ml, Catheter Size 18 (Details In Rc) [S96.B] , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- (Details In Rc) [S97] , Miscallenus Drugs , Alkelizer Syp , Amino Acid Inj 200 Ml , Azitromycin 100 Mg Syp , Black Googles , Bleeching Powder Bags 25 Kg , Blood Collection Bags 350 Ml , Botroclot Lotion , Buds , Cannula Fixer , Carbolic Acid Crystalline , Cefipime Inj 1Gm , Cefuroxime 250 Mg Inj , Cefuroxime 500 Mg Inj , Compound Sodium In Glass 500 Ml , Corneal Scissor Curved , Cotton Bandage 3 Inch[Lp.25]-[M] , Cotton Bandage 4 Inch[Lp.6]-[St] , Cotton Bandage 6 Inch[Lp.7]-[St] , Cough Syp (Seddative Formula) , Crescent Blade , Crescent Sics Blade , Cup Googles , Disposable Needle No. 23[Lp.2]-[St] , Disposable Needle No. 24[Lp.3]-[St] , Disposable Needle No. 26[Lp.4]-[St] , Disposable Needle No.22[Lp.1]-[St] , Ecoshield Solution For Ulv-Fogger Maschine , Elastoplast 10Cmx1mt , Elastoplast 10Cmx2/3Mt , Enzyme Drops 100 Ml , Esmolol 10 Ml Inj , Ethamsylate Tab 250 Mg , Fexofenadine Syp , Gauze Than[Lp.5]-[St] ( 120 Cm X 9 Mtr.) Claim 108 Cmx8.10 Mtr. , Haemaccel Inj , Hand Sanitizer Solution , Hepatiti Vaccine 1 Ml , Hmt Inj , Hydrodisection Cannula , Irrigation Cannula G20,22,22 , Keratone 2.8Mm Sics Blades Inj , Keratone Blades For Eye , Lense Dialer , Limbs Forceps , Liquid Soap For Hand Wash , Mephentermine Inj 1 Ml , Mephentermine Inj 10 Ml , Microscope Bulb /Blade , Moxifloxacin & Dexamethasone Eye Drops , Moxifloxacin Eye Drops , Neotach Inj , Pampers(Sanitary Pads For Kids) , Pilocarpine Sulphate Inj , Plastic Apron , Plastic Bags ( Biogradable 0, Minimum 50 Micron Size( Black,Red, Blue, Yellow) , Refractive Spectacals , Side Port , Silk Suture 10-0 With Needle , Simco Cannula 22 G , Simco Cannula 22 G , Skin Traction Kit (Adult) Sponge , Skin Traction Kit (Kid) Sponge , Snitary Napkins Handloom , Sodium Chloride Eye Drops , Sodium Hypochloride Solution 5 Litre , Sterile Disposable Spinal Needle For Single Use. 23G X 3 1/2 Inch , Sterle Catheter K-90 , Sterle Catheter K-91 , Swab Stick(Buds) , Syringe 50 Ml Sterile,Single Use Disposable , Timolol Maleate Eye Drops , Tranexamic Acid Inj , Tropicamidem & Phenylephrineeye Drop , Trypan Blue Dye , Tst Sterilzer Strips (For Bowie & Dick Test) , Vitamin B Complex Syp , Xylocard 2% Inj , Zinc Sulphate Drops , Puncture Proof Box , Three Bucket System , Bins 30 Ltr , Bins 40 Ltr , Bins 50 Ltr , Bins With Paddle 30 Ltr , Bins With Paddle 40 Ltr , Bins With Paddle 50 Ltr , Black Disinfectant Fluid (Phenyl) As Per Schedule O Grade Iii20 Ltr Can , Ethamsylate Tab 500 Mg , Surgicals & Sutures , Abdominal Drain Kit (With Collection Bag 2000 Ml Size 24 (Details In Rc) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) Size 28 (Details In Rc) , Abdominal Drain Kit,Sterile,Having Drainage Cather And Collection Bag(2000) Ml Size 32 (Details In Rc) , Absorbable Gelatin Sponge 80 X 50X 10Mm(Details In Rc) , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property(Details In Rc) , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 20 Mm Length 76 Cm) Size -3/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 30 Mm Length 76 Cm) Size -2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 40Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size-1 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 30 Mm Length 76 Cm) Size-2/0 , Absorbable Surgical Suture (Sterile Catgut) Bp/Usp Needled Suture Chromic(3/8 Cir Rb Needle 40 Mm Length 76 Cm) Size -1/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic Size-3/0 (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 1/0 1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)Size 2/0 1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 1 1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial With Sterilised Needled Suture(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 3/0 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-2/0 1/2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 (1/2 Circle Reverse Cutting 50 Mm Length 90Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1/0(1/2 Circle Rb 30Mm Needle,Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2/0 (1/2 Circle Rb 31Mm Needle, Length 70Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)1/2 Cir Rb Needle Size-1/0 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size - 3/0 1/2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1 1/2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-1/0(1/2 Cir Rb Needle 40Mm Length 90 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)Size-4/0 (1/2 Cir Rb Needle 20Mm Length 70 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 3/0 3/8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture (Synthetic)Antibacterial With Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)Size 3/0 3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size 1 1/2 Cir Tapercut Needle (Heavy) 40Mm Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial Coated Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Antibacterial With Sterilised Needled(Braided Coated Polyglactin/Polyglycolic Acid Violet)Size 1/0 1/2 Circle Ct Round Bodied 40Mm,Gs Needle,Suture Length 90 Cm , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-3/0(1/2 Cir Conventional 25Mm Length 90 Cm)Undyed , Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-Co-L-Lactide)Size-4/0 3/8 Circle Cutting 16Mm Needle,Suture Length 70Cm , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate,Size 3/0 (1/2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 3/0 (3/8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone /Polyglyconate Size 4/0 (1/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) , Absorbable Surgical Sutures,Sterilised Needled Polyglecaprone/Polyglyconate,Monofilament Sutures Size 2/0 (1/2 Circle Oval Rb Needle 26Mm Needle,Suture Length Of 70Cm) , Absorbent Cotton Wool Ip 500 Gm , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , B.B Silk Suture (3/8 Cir Rb Needle 16Mm, Length 76 Cm Size 5/0 (Details In Rc) , B.B Silk Suture (3/8 Cir Rb Needle 20Mm, Length 76 Cm Size 4/0 (Details In Rc) , Blood Administration Set Blood Transfusion Set (Details In Rc) , Bone Cement , Bone Wax Sterilised , Catheter,Size 10(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 16(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 18(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 20(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 22(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 24(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Catheter,Size 8(Foleys Ballon Catheter Sterile,2 Way For Urinary Drainage,Single Use,)Silicon Coated Natural Latex Material(Details In Rc) , Chromic Catgut Suture(3/8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm) Size 6/0 (Details In Rc) , Chromic Catgut Suture(3/8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm) Size 4/0 (Details In Rc) , Chromic Catgut Suture(3/8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm) Size 5/0 (Details In Rc) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 16 (Details In Rc) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) Size Of Bellow 800 Ml, Catheter Size 18 (Details In Rc) , Corrugated Drainage Sheet - All Sizes(Details In Rc) , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powder Free , Disposable Sterile Surgical Rubber Gloves Size 8 Inches,Powdered , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Cuff - Size 4.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 5 Details In Rc , Endotracheal Tube, Cuff - Size 6 (Details In Rc) , Endotracheal Tube, Cuff - Size 7 (Details In Rc) , Endotracheal Tube, Cuff - Size 7.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 8 (Details In Rc) , Endotracheal Tube, Cuff - Size 8.5 (Details In Rc) , Endotracheal Tube, Cuff - Size 9 (Details In Rc) , Endotracheal Tube, Cuff- Size 6.5 (Details In Rc) , Endotracheal Tube, Cuffed - Size 4 (Details In Rc) , Endotracheal Tube, Plain - Size 2.5 (Details In Rc) , Endotracheal Tube, Plain - Size 3 (Details In Rc) , Endotracheal Tube, Plain - Size 3.5 (Details In Rc) , Endotracheal Tube, Plain - Size 4 (Details In Rc) , Endotracheal Tube, Plain - Size 4.5 (Details In Rc) , Endotracheal Tube, Plain - Size 5 (Details In Rc) , Endotracheal Tube, Plain - Size 5.5 (Details In Rc) , Endotracheal Tube, Plain - Size 6 (Details In Rc) , Endotracheal Tube, Plain - Size 7 (Details In Rc) , Endotracheal Tube, Plain - Size 7.5 (Details In Rc) , Endotracheal Tube, Plain - Size 8 (Details In Rc) , Endotracheal Tube, Plain - Size 8.5 (Details In Rc) , Endotracheal Tube, Plain -Size 6.5 (Details In Rc) , Face Mask, Disposable(Details In Rc) , Foldable Intra Ocular Lense With Injector (Details In Rc) 11 To 17.5 , Foldable Intra Ocular Lense With Injector (Details In Rc) 18 To 24 , Foldable Intra Ocular Lense With Injector (Details In Rc) 24.5 To 28.5 , Foleys Catheter No. 14 (Detail In Rc) , Gloves Size 6.5 Inches,Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 6.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 .5Inches,Powder Free (Disposablesterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 Inches,Powder Free (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Gloves Size 7.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details In Rc) , Infant Feeding Tube Size 10Fg(Details In Rc) , Infant Feeding Tube Size 5Fg(Details In Rc) , Infant Feeding Tube Size 8Fg(Details In Rc) , Infusion Set With Microdrip,(I.V.)Sterile Disposable(Details In Rc) , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conforn To Is 12227 , K Wire, Length 375 Mm; 1.6Mm(Details In Rc) , K Wire, Length 375 Mm; 1.8Mm(Details In Rc) , K Wire, Length 375 Mm; 1Mm(Details In Rc) , Mucus Extractor Sterile(Details In Rc) , Nasal Oxygen Set, Twin Bore All Sizes Adult (Details In Rc) , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics (Details In Rc) , Nelaton Catheter Size 14 Fg(Detail In Rc) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2/0 1/2 Circle Taper Cut,17Mm Double Armed Needle,Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate/Silicon Coated With Polyster Braided(Green/Blue)Size 2-0 1/2 Circle Taper Cut,25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2/0(3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(1/2 Cir Rb Needle 20Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3/0(3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With Size 3/0 1/2 Circle Tapercut Double Needle 25Mm,Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 (1/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1(1/2 Cir Rb Heavy Needle 45Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1/0(1/2 Cir Rb Needle 30Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Cir Rb Needle 30Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0 (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2/0(1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3/0(3/8 Cir Cutting Needle 25Mm Length 45 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Cir Tapercut Double Needle 17Mm Length 70 Cm)(Detail In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4/0 (1/2 Circle Tapercut 13Mm Double Needle 70Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(1/2 Cir Rb Double Needle 17Mm Length 90 Cm)(Detail In Rc) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5/0(3/8Cir Rb 16 Mm Needle, Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 10/0 (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon) Size 8/0 (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 1/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 2/0 (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 3/0 (3/8 Conventional Cutting Needle 16Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black (Nylon)Size 4/0 (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2/0 (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/ Blue Size 4/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate/Silicon Coated Polyster Braided Green/Blue Size 2/0(1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm)(Detail In Rc) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 3/0 (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 4/0(1/2 Cir Rb Needle 16 Mm Length 70 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 5/0 (1/2 Circle Cc 13Mm Needle, Suture Length Of 70Cm) Double Arm , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 6/0(3/8Cir Rb Taper Point Double Needle 9.3Mmlength 60 Cm)/(3/8Cir Rb 16 Mm Needle,Length 90 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 7/0 (3/8Cir Rb Double 8Mm Needle, Length 60 Cm) , Non Absorbable Surgical Suture,Sterilised Needled Monofilament Polypropylene Blue Size 8/0 (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) , Non Absorbable Surgical Suture,Sterilised Needled Polyamide Monofilament Black (Nylon)Size 5/0(3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) , Oxygen Mask (Adult) , Oxygen Mask (Pediatric) , Paper Adhesive Plaster 1 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts (With Cutter) Non Woven Adhesive Tape , Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use)Sterile Disposable(Details In Rc) , Perfusion Set With Airway And Needle,(Adult Use) Sterile Disposable(Details In Rc) , Plaster Of Paris Bandage 10Cm X 2.7Mts , Plaster Of Paris Bandage 15Cm X 2.7 Mts/Roll , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Pressure Monitoring Line / High Pressure Extension Line (Details In Rc) , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large (Details In Rc) , Rubber Examination Gloves, Non-Sterile, Extra Small(Details In Rc) , Rubber Examination Gloves,Size Medium (Details In Rc) , Rubber Examination Gloves,Size Small (Details In Rc) , Ryles Tube / Nasogastric Tube Size: 10(Details In Rc) , Ryles Tube / Nasogastric Tube Size: 12(Details In Rc) , Ryles Tube / Nasogastric Tube Size: 16 (Details In Rc) , Ryles Tube / Nasogastric Tube Size: 18 (Details In Rc) , Ryles Tube / Nasogastric Tube Size:14 (Details In Rc) , Sanitary Napkin Beltless With Wings (Details In Rc) , Sanitary Napkin Beltless(Details In Rc) , Sanitary Pads Belt Type(Details In Rc) , Scalp Vein Set (Disposable) Size 18G (Details In Rc) , Scalp Vein Set (Disposable) Size 20G (Details In Rc) , Scalp Vein Set (Disposable) Size 22G (Details In Rc) , Scalp Vein Set (Disposable) Size 24 G (Details In Rc) , Skin Graft Knife Blade (Sterile) & Handle(Details In Rc) , Standard Pama Intra Ocular Lenses (Details In Rc) 11 To 17.5 , Standard Pama Intra Ocular Lenses (Details In Rc) 18 To 24 , Standard Pama Intra Ocular Lenses (Details In Rc) 24.5 To 28.5 , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port Size 24G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G (Details In Rc) , Sterile Disposable (Single Use) Teflon/Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 26G (Details In Rc) , Sterile Disposable (Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.) Size 18G (Details In Rc) , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1/2 Inch (Details In Rc) , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1/2 Inch (Details In Rc) , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm(Details In Rc) , Suction Catheter, Sterile. Size: F G-10 (Details In Rc) , Suction Catheter, Sterile. Size: F G-12 (Details In Rc) , Suction Catheter, Sterile. Size: F G-14 (Details In Rc) , Suction Catheter, Sterile. Size: F G-16 (Details In Rc) , Suction Catheter, Sterile. Size: F G-18 (Details In Rc) , Suction Catheter, Sterile. Size: F G-20 (Details In Rc) , Suction Catheter, Sterile. Size: F G-22 (Details In Rc) , Suction Catheter, Sterile. Size: F G-6 (Details In Rc) , Suction Catheter, Sterile. Size: F G-8 (Details In Rc) , Suction Catheter, Sterile.Size: Fg 5 (Details In Rc) , Surgical Blade Sterile, Size 11(Details In Rc) , Surgical Blade Sterile, Size 15(Details In Rc) , Surgical Blade Sterile, Size 22(Details In Rc) , Surgical Cap Disposable (For Surgeons)(Details In Rc) , Surgical Cap, Disposable (For Nurses) (Details In Rc)(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 11-15(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 1-5(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 16-20(Details In Rc) , Suture Needles Curved 1/2 Circle Round Body Assorted Size 6-10(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Cutting Size 6-10(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Size 11-15(Details In Rc) , Suture Needles Curved And Cutting 1/2 Circle Size 16-20(Details In Rc) , Suture Needles Curved And Cutting Size 1-5(Details In Rc) , Syringe 10 Ml Hypodermic With Needle Attached 22G,Sterile,Single Use Disposable(Details In Rc) , Syringe 2 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Syringe 20 Ml Hypodermic With Needle Attached 22G,Sterile,Single Use Disposable(Details In Rc) , Syringe 5 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Syringe 50 Ml Hypodermic With Needle Attached 24G,Sterile,Single Use Disposable(Details In Rc) , Temporary Cardiac Pacing Wire (Electrode) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Tracheostomy Tube (Pvc), Cuffed - All Sizes(Details In Rc) , Tracheostomy Tube, Plain - All Sizes(Details In Rc) , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- (Details In Rc) , Umbilical Catheter For New Born, All Sizes -(Details In Rc) , Umbilical Cord Clamp (Details In Rc) , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml (Details In Rc) , Urethral Catheter 90[ S107 ] , Urethral Catheter 91[ S108 ] , Urine Collecting Bag, Disposable 2000 Ml(Details In Rc) , Nasal Pronge Neonatal [ S126 ] , Pampers(Sanitary Pads For Kids) 0 Size , Other Medicine , Caffiene Citrate Inj. 20Mg/Ml (3 Ml) , Rh –Erythroprotein Inj 3000 Iu , Surfactant For Intratracheal Instillation Inj. , Tab. Sacubitril 24 Mg And Valsartan 26 Mg , Salmeterol 50 Mcg And Fluticason 500 Mcg , Formatrol 20 Mcg And Budensonide 0.5 Mg Respiratory Solution , Formatrol 6 Mcg And Fluticason250 Mcg Mdi , Formatrol 12 Mcg And Budensonide 400 Mcg Powder For Inhalation , Formatrol 6 Mcg And Budensonide 200 Mcg Mdi , Formatrol 6 Mcg And Budensonide 400 Mcg Mdi , Tab. Formaline , Tab. Furosemide 20 Mg And Spiranalactone 50 Mg , Gatifloxacine 0.30% And Prednisolone Acetate 1% Opthalmic Solution , Olapatadine 0.1% And Ketorlac 0.4% Opthalmic Soln , Tab Olmisartal Medoxanil 20 Mg , Olaptadine Hydrochloride Opthalmic Soln 01% W/V (5 Ml) , Cap Omiprazol And Domperodome , Syp. Ondansetron Oral Susp. 2Mg/5 Ml(30Ml) , Pressure Monitoring Line , Tab. Paracetamol 650 Mg , Paracetamol Infusion 1% W/V (100 Ml) , Peritoneal Dialysis Fluid (Capa) 1.5%, 23%,2.5% (1 Litr) , Peritoneal Dialysis Fluid (Capa) 1.5%, 23%,2.5% (2 Litr) , Peritoneal Dialysis Fluid (Capa) 1.5%, 23%,2.5% , Syp. Phenobarbitone 20 Mg/5 Ml (100 Ml) , Inj Verapamil 2.5Mg/Ml , Phenylephrine Hcl Opthalmic Soln 5% , Inj Pilocarpine 0.5% W/V , Pilocarpine Eye Drop Ip 2% , Tab Piracetam 200 Mg , Tab Aceclofanic 100 Mg And Thiocolchicoside 4 Mg , Tab Aceclofanic And Paracetamol And Serratipetidase (100 Mg +325Mg +15 Mg) , Tab Diclofanic And Paracetamol And Serratipetidase (50 Mg+325Mg+10 Mg) , Absorbant Cotton Wool 100 Gm , Cotton Roll 200 Gm , Lysol (Cresol 50% +Soap 50%) 5 Litr. , Cotton Crape Bendage Bp 8Cmx 4 M , Cotton Crape Bendage Bp 10 Cmx 4 M , Cotton Crape Bendage Bp 6 Cmx 4 M , Syp Azithromycin 100 Mg Per 5 Ml Size 30 Ml , Syp Azithromycin 200 Mg Per 5 Ml Size 30 Ml , Carboximethyle Cellulose And Glycerin Eye Drop , Tab-Carbedilol 3.125 Mg , Cefixime Oral Suspention 100 Mg Per 5 Ml , Cefixime Oral Suspention 50 Mg Per 5 Ml , Cefpodoxime Proxitil Oral Suspension 100 Mg Per 5 Ml , Tab-Cefpodoxime Proxitil50 Mg , Tab-Cefuroxime Axitil 500 Mg , Chloranphenicol 1% W/W Eye Oint , Chloranphenicol 1% Polymyxin Sulphate (1000 Unit) And Dexamethasone 1% Sodium Phosphate Eye Drop , Syp-Codiene Phosphateand Triprolidine Sulphate , Combi Kit Of Fluconazole 150 Mg Azithrimycin 1 Gm And Secnidazole 1 Gm , Tab Deflazacort 12 Mg , Tab Deflazacort 6 Mg , Syp- Dextromethaphan 10 Mg And Chlorpheniramine Melate 2 Mg , Tab Doxylamine Succinate 20 Mg And Pyridoxine Hcl 20 Mg , Factor Ix Concentrate Ip 500-600 Iu , Tab Febuxatol 40Mg , Each 5 Ml Contain Milk Of Megnesaia 11.25Ml+Liquid Perrafin 375Ml 170 Ml Syrup , Enzyme Drop , Enzyme Syrup Each Ml Contain Diastage 50Mg+Pepsin 10Mg , Tab Esmaprazole 40Mg , Inj Ephedrine 30Mg/Ml , Inj Ferric Carboxy Maltose50mg/Ml 10Mi , Glucose Powder (Dextrose Monohydrate) , Inj Hepatitis Bimmunoglobulin 200Iu , Inj Hepatitis B Immunoglobulin 100Iu , Hiv Rapid Test Kit Fourth Generation , Inj Human Chronic Gonadotropine 500Iu , K-Wire Length 375Mm,1.6Mm , K-Wire Length 375Mm,1.8Mm , K-Wire Length 375Mm,1Mm , Cap L-Omithine L Aspartate 150Mg And Pancreatin 100Mg , Levetiracetam Oral Soln 100Mg/Ml , Tab Leviteracetam Ip 250Mg , Syp Levofloxacin 125Mg/Ml , Levosalbutamol 1.25Mcg And Ipratropium 500Mcg Respiratory Soln 2.5Ml , Levosalbutamol 100Mcg And Ipratropium 40Mcg Dpi , Levosalbutamol 50Mcg And Ipratropium 40Mcg Mdi2.5Mg , Tab Levosulpride 25Mg , Cream Luliconazole 1% , Tab Mefenamic Acid 250Mg And Dicyclomine Hcl 10Mg , Inj Mefentermine 30Mg/Ml 10 Ml Size , Inj Esmolol Hcl 10Mg/Ml 10Ml Size , Tab Methyl Prednesolone 16Mg , Tab Methyl Prednesolone 8Mg , Tab Methyl Prednesolone 4Mg , Cream Momentasone 0.1% , Syp Monteleukast 4Mg And Levocetrizine2.5Mg , E/D Moxifloxacin 0.5% And Predenesolone1% , Multistix Test Strip , Inj Nandrolone Deconate 50Mg , Nebulization Mask Adult , Nebulization Mask Paediatric , Oint. Mupirocin 2% , Povidone Iodine Gargle 0.5%W/V , Tab Rosubastatin 10Mg , Tab Rosubastatin 20Mg , Tab Rosubastatin 10Mg And Fenofibrate 160Mg , Tab Telmisartan 40Mg And Hydrochlorthiazide 12.5Mg , Tetanus Vaccine Adsorbed 0.5Ml Inj , Tab Tramadol 37.5 Mg And Paracetamol 325Mg , E/D Tropicamide 0.8 % +Phenylephrine 5%W/V , Tab Trypsin Chymotrypsin 1 Lakh Unit Of Enzyme , Tab Bidagliptine 50 Mg , Vit. D3 400 Iu/Ml Drop , Drop Anticold (Pcm 125 Mg + Chlorpheniraminehmalate 1 Mg + Phenyephrine 2.5Mg) 15 Ml , Dro Hydroxyzine 6Mg /Ml , Cap. Antioxdant , Drop Vitamin D3 800 Iu/Ml , Cap Vit. E 400 Mg , Tab Voglibose 0.2 Mg , Tab Voglibose 0.3 Mg , Vancomycin For Intraveneous Infusion 1 Gm , Vancomycin For Intraveneous Infusion 500 Mg , Syp. Zinc Sulphate 25Mg/5 Ml , Glycopeglyted Extended Half Line Factor Viii 1000 Iu , Glycopeglyted Extended Half Line Factor Viii 500 Iu , Glycopeglyted Extended Half Line Non Cogulant Betafactor Ix 1000 Iu , Glycopeglyted Extended Half Line Non Cogulant Betafactor Ix 500 Iu , Cotton Roll 50 Gm , For Dental Opd , Composite Filling Instrument (Api) , Elevators (Api) , Cryer (Api) , Straight (Api) , Grooved (Api) , Tooth Extraction Forceps Kit Upper , Tooth Extraction Forceps Kit Lower , Luxators , Mouth Mirror , Probe , Twizzer , Third Molar Forcep Upper , Third Molar Forcep Lower , Gic Filling Instrument (Api) , Diamond Bur Ball Round(Mani) , Diamond Bur Straight (Mani) , Diamond Bur Taper Fissure (Mani) , Diamond Bur Inverted Cone (Mani) , Diamond Bur Ocelusal Reduction Bur (Mani) , Carbide Bur Round (Mani) , Carbide Bur Straight Fissure(Mani) , Bone Cutting Bur (Mani) , Chisel Unibevol (Api) , Mallet (Teflon Coated) (Api) , Periosteal Elevator (Api) , Bone File (Api) , Artery Forecep , Niddle Holder , Scissors (Small) , Monn’S Probe , Surgical Curette , Gic Filling Material (Gc9) (Gc) , Root Canal Selant (Zno Base) (Amdent) , Endodontick File (15-40) 21 Mm (Mani) , Endodontick File (15-40) 25 Mm (Mani) , Endodontick File (45-80) 28 Mm , G.P Point 2% (15-40)(Densply) , G.P Point 2% (45-80) (Densply) , Zinc Oxide Powder (100 Gm) , Eugenol 100 Ml , Calcium Hydroxide Paste 2 Gm , Edta Paste 2 Gm , B.P Knife Handle , Iodoform50 Gm. , Silver Alloy30 Gm. , Mercury 30 Gm.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Rajasthan View Result →
11.
Educational and Research Institute #9048063 Technical Bid
Annual Tender For Establishment Of Rate Contract For Procurement Of Drugs, Medicine, Medical Consumables And Devices Rate Contract For Procurement Of Drugs, Medicine, Medical Consumables And Devices-1 Dm001 Purified Water, Cyclopentasiloxane, Dimethicone, Isopropyl Myrisate, Shea Butter, Dimethicon, Sodium Polyacrylate, Dimethiconol, Dimethicone, 2 Dm002 Calamine 15% W / V, Zinc Oxide 5% W / V, Bentonite 3% W / V, Sodium Citrate 0.5% W / V, Liquid Phenol .5% V / V, Glycerine 5% V / V 3 Dm003 Purified Water, Alovera Gel, Light Liquid Paraffin, Calamine, Glycerin, Silicone Oil, Dimethiconol Bentonite, Magnesium Aluminium Silicate, Methyl Paraben 4 Dm004 Chlorhexidine Gluconate 0.2%W / V+Sodium Fluoride 0.05%W / V+Zinc Chloride 0.09%W / V, 100Ml 5 Dm005 Hydrocortisone 10% 6 Dm006 Liquid Parafin Ip 7 Dm007 Lactulose 20% W / V Enema 8 Dm008 Mesalazine 4Mg Enema 9 Dm009 White Soft Paraffin 13.2%W / V, Light Liquid Paraffin 10.2%W / V 10 Dm010 Ketaconazole 2%W / V 11 Dm011 Sodium Phosphate Enema 100Ml 12 Dm012 Ketoconazole ( 2% W / V ) + Coal Tar ( 4% W / V ) 13 Dm013 Flucinolone Acetonide 0.01%W / V 14 Dm014 Glycerin 98 % W / W 100 Gm 15 Dm015 Glycerol 85% W / W 100G 16 Dm016 Acetylcysteine 200Mg / Ml Inj 17 Dm017 Aciclovir 25Mg / Ml Inj 18 Dm018 Adalimumab 40Mg / 0.8Ml Inj 19 Dm019 Adenosine 3Mg / Ml Inj 20 Dm020 Adrenaline Bitrate 1Mg / Ml 21 Dm021 Albumin Human 20% 100Ml 22 Dm022 Albumin 5% 250 Ml 23 Dm023 Albumin Human 25%100Ml 24 Dm024 Alteplase 20Mg Inj 25 Dm025 Ambroxol Hcl 15 Mg Resp 26 Dm026 Amikacin Sulphate 250Mg Inj 27 Dm027 Amikacin Sulphate 500 Mg Inj 28 Dm028 Amikacin Sulphate 100Mg Inj 29 Dm029 Aminophylline 25Mg / Ml, 10Ml Inj 30 Dm030 Amiodarone 50Mg / Ml Inj 31 Dm031 Amoxycillin 1G+ Potassium Clauvnate 200 Mg Inj 32 Dm032 Amoxycillin 250 Mg + Potassium Clavunate 50 Mg Inj 33 Dm033 Anidulafungin 100Mg Inj 34 Dm034 Anti Rabies Vaccine- 35 Dm035 Artesunate 60Mg Inj 36 Dm036 Ascorbic Acid 100 Mg / Ml Inj 37 Dm037 Atracurium 100Mg / 10Ml Inj 38 Dm038 Atracurium 10Mg / Ml, 5Ml Inj 39 Dm039 Atropine Sulphate 0.6Mg / 1Ml Inj 40 Dm040 Azithromycin 500Mg Inj 41 Dm041 Aztreonam 1G Inj 42 Dm042 Aztreonam 500Mg Inj 43 Dm043 Budesonide 0.5 Mg Respules 44 Dm044 Bupivacane 5 Mg+Dextrose. 80Mg 45 Dm045 Calcitonin 100 Iu / 1 Ml Inj 46 Dm046 Calcium Chloride 10% 10Ml Inj 47 Dm047 Calcium Gluconate 50 Mg / Ml Inj 48 Dm048 Caspofungin 70Mg Inj49 Dm049 Cefepime 1G Inj 50 Dm050 Cefepime Igm + Sulbactum 500Mg Inj 51 Dm051 Cefoperazone Sodium 1G Inj 52 Dm052 Cefotaxime Na 1Gm Inj 53 Dm053 Ceftazidime 1Gm Inj 54 Dm054 Ceftriaxone 1G +Sulbactum 500Mg Inj 55 Dm055 Ceftriaxone 1G Inj 56 Dm056 Cefuroxime 750Mg Inj 57 Dm057 Testosterone Undecanoate 1G Inj 58 Dm058 Remedesvir 100Mg Inj 59 Dm059 Ciprofloxacin 2Mg / Ml Inj 60 Dm060 Cisatracuriumbesylate 10Mg / 5Ml Inj 61 Dm061 Citicoline 250 Mg / Ml Inj 62 Dm062 Enoxaaparin 20Mg Inj 63 Dm063 Enoxaperin 40Mg / 0.4 Ml Inj 64 Dm064 Enoxaparin 60Mg / 0.6 Ml Inj 65 Dm065 Clindamycin 300Mg Inj 66 Dm066 Clindamycin 600Mg 4Ml Inj 67 Dm067 Colistimethate Na 1 Miu Inj 68 Dm068 Colistimethate Na 3 Miu Inj 69 Dm069 Isavuconazole 200Mg Inj 70 Dm070 Darbepoetin 40 Mcg / 0.4 Ml Inj Pfs 71 Dm071 Denosumab 60Mg / Ml Inj 72 Dm072 Dexamethasone 4 Mg / Ml , 2Ml Inj 73 Dm073 Dexmedetomidine 100 Mcg / Ml Inj 74 Dm074 Dextrose 25% 25Ml Inj 75 Dm075 Diazepam 5Mg / Mlinj 76 Dm076 Diclofenac Na 75Mg / Ml Inj 77 Dm077 Digoxin 0.25Mg / Ml Inj 78 Dm078 Diltiazem 5 Mg / Ml Inj 79 Dm079 Dobutamine Hcl50mg / Ml 80 Dm080 Dopamine Hcl 40Mg / Ml Inj 81 Dm081 Doripenem 500 Mg Inj 82 Dm082 Doxycycline Hcl 100Mg Inj 83 Dm083 Drotaverine Hcl 20Mg / Ml Inj 84 Dm084 Ipratropium 500 Mcg+Levo 1.25 Mg Respules 85 Dm085 Diphtheria Immune Globulin ( 30Iu ) + Haemophilus Type B Conjugate Vaccine ( 10Mcg ) + Pertussis Toxoid ( 4Iu ) + Tetanus Toxoid ( 60Iu ) + Poliomyelitis Virus Type 1 ( 40D Antigen Unit ) + Poliomyelitis Virus Type 2 ( 8D Antigen Unit ) + Poliomyelitis Virus Type 3 ( 32D Antigen Unit ) 86 Dm086 Ferric Carboxymaltose 1G Inj 87 Dm087 Ephedrine Hcl 30Mg / Ml Inj 88 Dm088 Ertapenam Sodium 1G Inj 89 Dm089 Pegylated Erythropoetin 50 Mcg / 0.3Ml Inj Pfs 90 Dm090 Erythropoetin Alfa 5000 Iu / 0.5 Ml Inj Pfs 91 Dm091 Esmolol Hcl 10Mg / Ml Inj 92 Dm092 Ethamsylate 125Mg / Ml Inj 93 Dm093 Etomidate 2Mg / Ml Inj 94 Dm094 Etophyllin 84.7 Mg+Theophyllin 25.3Mg Inj 95 Dm095 Ferric Carboxymaltose 500Mg Inj 96 Dm096 Paracetamol 300 Mg Inj 97 Dm097 Filgrastim 300 Mcg / Ml Inj Pfs 98 Dm098 Fluconazole 200Mg Inj 99 Dm099 Foracort 1Mg Respules 100 Dm100 Fosfomycin Na 4 Gm Inj 101 Dm101 Frusemide 10Mg / Ml , 4Ml Inj 102 Dm102 Ganciclovir 500 Mg Inj 103 Dm103 Gentamycin 40Mg / Ml Inj150 Dm150 Linezolid 600 Mg / 300 Ml Inj 151 Dm151 Liposomal Amphotericin B 50Mg Inj 152 Dm152 Lorazepam 2Mg / Ml, 2Ml Inj 153 Dm153 L-Ornithine-L-Asparate 500 Mg / Ml , 5G Inj 154 Dm154 Lox 2% With Adrenaline 30Ml Inj 155 Dm155 Lignocaine 21.3 Mg+Sodium Chloride 50Ml Inj 156 Dm156 Magnesium Sulphate 25 % 2Ml Inj 157 Dm157 Magnesium Sulphate 50% 2Ml Inj 158 Dm158 Sulbactum 500 Mg+Cefoperazone 500 Mg Inj 159 Dm159 Mecobalamine 500Mcg / Ml Inj 160 Dm160 Meningococcal Vaccine ( Group A, C, Y &W-135 ) 16Mcg+Diphtheria Toxoid 48Mcg , Single Dose Vial 161 Dm161 Mephentermin 30Mg / Ml 10Ml Inj 162 Dm162 Meropenem 1Gm Inj 163 Dm163 Meropenem 500 Mg Inj 164 Dm164 Meropenem Edta 1G Inj 165 Dm165 Mistabron 600 Mg Respules 166 Dm166 Methylene Blue 100 Mg Inj 167 Dm167 Methylprednisolone Sodium Succinate 40 Mg Inj 168 Dm168 Metoclopramide Hcl 5 Mg / Ml Inj 169 Dm169 Metoprolol Tartrate 5Mg Inj 170 Dm170 Micafungin 100 Mg Inj 171 Dm171 Micafungin Na 50 Mg Inj 172 Dm172 Midazolam 10Ml Inj 173 Dm173 Midazolam 5Mg Inj 174 Dm174 Milrineon 10Mg Inj 175 Dm175 Minocycline 100Mg Inj 176 Dm176 Measles Vaccine ( Live ) 1000Ccid 50+Mumps Virus Vaccine 5000Ccid 50+Rubella Vaccine Live 10000Ccid 50 177 Dm177 Moxifloxacin Hcl 400Mg Inj 178 Dm178 Vitamin A ( 1000Iu ) + Thiamine ( Vitamin B1 ) ( 5Mg ) + Vitamin B2 ( 1.40Mg ) + Vitamin D3 ( 100Iu ) + Pantothenic Acid ( Vitamin B5 ) ( 2.50Mg ) 179 Dm179 Glycopyrolate 0.5Mg +Neostigmin 2.5Mg Inj 180 Dm180 Naloxone 400 Mcg Inj 181 Dm181 Nandrolone 25 Mg Inj 182 Dm182 Nandrolone 50 Mg Inj 183 Dm183 Paracetamol 80Mg Suppository 184 Dm184 Neostigmine 2.5Mg Inj 185 Dm185 L-Isolucine Oh.Eur.0.510G+L-Liucine Ph.Eur.1.050G+L-Lysine Monoacetate Usp 1.001G+ Lysine 0.71G+L-Methionine Ph.Eur.0.280G+Acetylcystine 0.050G+Cysteine Ph.Eur.0.037G+L-Phenyalanine Ph.Eur.0.380G+L-Threonine Ph.Eur.0.480G+L-Tryptophan Ph.Eur 0.190G+L-Valine Ph.Eur.0.620G+L-Arginine Ph-Eur.0.490G+L-Histidine Ph.Eur.0.430G+Glycine Ph.Eur.0.320G+L-Alanine Ph.Eur.0.630G+L-Serine Ph.Eur.0.450G+L=Malic Acid Dab 1997 0.150G+Glacial Acetic Acid Ph.Eur 0.138G+Water For Injection Ph.Eur.Q.S. Total Amino Acid 70G / L, Total Nitrogen 10.8G / L, Total Energ 1210Kj / L+Osmolarity 645Mosm / L 186 Dm186 Netilmicin Sul 300Mg / Ml Inj 187 Dm187 Nitroglycerin 5Mg / Ml Inj 188 Dm188 Nivolumab 100Mg Inj189 Dm189 Nivolumab 40Mg Inj 190 Dm190 Piracetam 200Mg / Ml, 15Ml Inj 191 Dm191 Noradrenaline 4Mg Inj 192 Dm192 Eptacog Alfa 2Mg Inj 193 Dm193 Eptacog Alfa 1Mg Inj 194 Dm194 Human Coagulation Factor Ii 280-760+Human Coagulation Factor Vii 180-480+Human Ix 500Iu+Factor X 360-600Iu+Protein C 260-620Iu+Protein S 240-640Iu , Total Protein 260-820Mg, Human Prthrombin Complex 195 Dm195 Octeotide Depot 30Mg Inj 196 Dm196 Octeotride Lar 20Mg Inj 197 Dm197 Octreotide 100Mcg Inj 198 Dm198 Ofloxacin 2Mg / Ml, 200Mg Inj 199 Dm199 Fish Oil 0.1 G Of , 0.012 G Egg Phospholipids, 0.025 G Glycerin, 0.15 To 0.3 Mg Dl-Alpha-Tocopherol, 0.3 Mg Sodium Oleate, Water For Injection, And Sodium Hydroxide For Ph Adjustment ( Ph 6 To 9 ) . / Ml , 50Ml 200 Dm200 Bacillus Calmette Guerin Strain 40Mg Inj 201 Dm201 Ondansetron 4Mg Inj 202 Dm202 Thiamine ( Vitamin B1 ) ( 100Mg ) + Vitamin B6 ( Pyridoxine ) ( 100Mg ) + Cyanocobalamin ( 1000Mcg ) + Vitamin B2 ( 5Mg ) + Nicotinamide ( 100Mg ) + D-Panthenol ( 50Mg ) 203 Dm203 Oxytocin 5Iu Inj 204 Dm204 Pantoprazole 40Mg Inj 205 Dm205 Papaverine 30Mg / Ml Inj 206 Dm206 Paracetamol 1G Inj 207 Dm207 Peginterferon Alfa-2B 100Mcg Inj 208 Dm208 Peginterferon Alfa-2B 80 Mcg Inj 209 Dm209 Pentazocine 30Mg / Ml Inj 210 Dm210 Pheniramine Maleate 22.75 Mg / Ml, 2Ml Inj 211 Dm211 Phenobarbitone 200 Mg Inj 212 Dm212 Phenylephrine 10Mg Inj 213 Dm213 Phenytoin Sodium 100Mg Inj 214 Dm214 Piperacillin 4G+ Tazobactum 500Mg Inj 215 Dm215 Piperacillin Na 2Gm + Tazobactum 250 Mg Inj 216 Dm216 Pneumococcal 13 Valent Conjugate Vaccine 217 Dm217 Pneumococcal Polysachharide Vaccine 25Mcg 218 Dm218 Polidocanol 30Mg / Ml Inj 219 Dm219 Polymixine B So4 5 Lac Inj 220 Dm220 Potassium Chloride 1.5G Inj 221 Dm221 Phosphorus 93Mg + Potassium 170 Mg Inj 222 Dm222 Pregnancy Test Kit 223 Dm223 Prochlorperazine 12.5 Mg / Ml Inj 224 Dm224 Promethazine Hcl 25Mg / Ml Inj 225 Dm225 Propofol 10 Mg / Ml , 20Ml Inj 226 Dm226 Propofol 10 Mg / Ml , 50 Ml Inj 227 Dm227 Propofol 2% W / V With Mct-Lct 50Ml Inj 228 Dm228 Inactivated Influenza Vaccine 229 Dm229 Ranitidine 25 Mg / Ml Inj 230 Dm230 Rocuronium Bromide 100Mg Inj 231 Dm231 Romiplostim 250Mcg Inj 232 Dm232 Salbutamol 2.5Mg / 2.5Ml Respules 233 Dm233 Sargramostim 500Mcg Inj 234 Dm234 Sodium Bicarbonate 8.4% W / V / Ml, 25Ml Ij 235 Dm235 Sodium Chloride 0.9% W / V 25Ml Inj 236 Dm236 Sodium Nitroprusside 50Mg Inj 237 Dm237 Sodium Tetradecyl So4 30Mg / Ml Inj238 Dm238 Sodium Valporate 100Mg / Ml Inj 239 Dm239 Methylprednisolone 500 Mg Inj 240 Dm240 Somatostatin 3 Mg Inj 241 Dm241 Streptomycin 0.75G Inj 242 Dm242 Succinylcholine 50Mg / Ml Inj 243 Dm243 Sulbactum Sodium 1G Inj 244 Dm244 Tetenus / Diphtheria / Pertusis Vaccine 245 Dm245 Teicoplanin 200Mg Inj 246 Dm246 Teicoplanin 400 Mg Inj 247 Dm247 Terlipressin 10Ml Inj 248 Dm248 Testosterone 250Mg Inj 249 Dm249 Thiamine Hcl 250Mg+Riboflavin 4Mg+Pyridoxine Hcl 50Mg / 5Ml ( Part A ) , Ascorbic Acid 500Mg+Nicotinamide 160Mg+Anhydrous Dextrose 1000Mg / 5Ml ( Part B ) Inj 250 Dm250 Thiopentone Sodium 1G Inj 251 Dm251 Thymoglobuline 25Mg / 5Ml Inj 252 Dm252 Ticarcillin 3G+Clavulanic Acid 100Mg Inj 253 Dm253 Tigecycline 50 Mg Inj 254 Dm254 Total Energy 1022 Kcal+Non Protein Energy 862 Kcal+Nitrogen 6.4G+Amino Acids 40G+Dextrose 120G+Lipids 40G+Sodium 18Mmol+Potassium 10Mmol+Magnesium 1.Mmol+Acetate 23.60Mmol+Chlorine 24.80Mmol+H2po4 3.60Mmol+ Maleate 3Mmol+Osmolarity 1158Mosmol / L+Ph 6.05, 1000Ml Inj 255 Dm255 Total Energy 763Kcal+Non Protein Energy 643 Kcal+Nitrogen 4.8G+Amino Acids 30G+Dextrose 80G+Lipids 24G+Sodium 13.50Mmol+Potassium 7.5Mmol+Magnesium 0.75Mmol+Acetate 17.70Mmol+Chlorine 18.60Mmol+H2po4 2.70Mmol+ Maleate 2.25Mmol+Osmolarity 818 Mosmol / L+Ph 5.95, 1000Ml Inj 256 Dm256 Tobamycin 300Mg Inj 257 Dm257 Tocilizumab 400Mg Inj 258 Dm258 Torsemide 20Mg Inj 259 Dm259 Tramadol 100Mg Inj 260 Dm260 Tranexamic Acid 500Mg Inj 261 Dm261 Triamcinolone 40Mg / Ml Inj 262 Dm262 Trimethoprim 80+Sulphamethoxazole 400Mg , 5Ml Inj 263 Dm263 Troponin T Kit 264 Dm264 Purified Vi Polysaccharide Typhoid Vaccine 25Mcg Inj 265 Dm265 Urokinase 5 Lakh Inj 266 Dm266 Vancomycin Hcl 500Mg Inj 267 Dm267 Varicella Vaccine Live Attenuated 2000Pfu, Monodose 0.5Ml Inj 268 Dm268 Vasopressin Inj 269 Dm269 Vecuronium Bromide 10Mg Inj 270 Dm270 Vecuronium Bromide 4Mg / 2Ml 271 Dm271 Vitamin D3 6Lac Iu Inj 272 Dm272 Vitamin -K 10 Mg Inj 273 Dm273 Nicotinamide 200Mg / Ml, Folic Acid 15Mg / Ml, Cyanocobalamin 500Mcg / Ml, 10Ml Inj 274 Dm274 Voriconazole 200Mg Inj 275 Dm275 Water For Injection 10 Ml 276 Dm276 Ceftazidime 2G + Avibactum 0.5G Inj277 Dm277 L-Leucine 5.6Mg + L-Isoleucine 12.5Mg 278 Dm278 Aprepitant 125 / 80Mg Kit 279 Dm279 Atezolizumab 1200Mg Inj 280 Dm280 Atezolizumab 840Mg Inj 281 Dm281 Bevacizumab 100Mg Inj 282 Dm282 Bevacizumab 400 Mg Inj 283 Dm283 Bleomycin 15Mg / 1Ml Inj 284 Dm284 Bortezomib 2Mg Inj 285 Dm285 Carboplatin 150Mg Inj 286 Dm286 Carboplatin 450Mg Inj 287 Dm287 Cetuximab 100Mg / 20Ml Inj 288 Dm288 Cetuximab 500Mg / 100Ml Inj 289 Dm289 Cisplatin 50Mg Inj 290 Dm290 Cyclophosphamide 1000Mg Inj 291 Dm291 Cyclophosphamide 500Mg Inj 292 Dm292 Cytarabine 100Mg / 1Ml Inj ( Biobin ) 293 Dm293 Cytoplatin 10Mg Inj 294 Dm294 Dacarbazine 500Mg Inj 295 Dm295 Daptomycin 350Mg Inj 296 Dm296 Decitabine 50 Mg Inj297 Dm297 Docetaxel 120Mg Inj 298 Dm298 Docetaxel 20Mg Inj 299 Dm299 Docetaxel 80Mg Inj 300 Dm300 Docetaxel Lypholized Lipid Suspension 80Mg Inj 301 Dm301 Docetaxel Lypholized Lipd Suspension 20Mg Inj 302 Dm302 Doxorubicin Plain 50Mg Inj ( Powder Form ) 303 Dm303 Doxorubicin Hcl 50Mg Rtu Inj 304 Dm304 Trastuzumab 150Mg Inj 305 Dm305 Trastuzumab 440Mg Inj 306 Dm306 Epirubicin 10Mg Inj 307 Dm307 Epirubicin 50Mg Inj 308 Dm308 Etoposide 100Mg Inj 309 Dm309 Flurouracil 500Mg Inj 310 Dm310 Fosaprepitant 150Mg Inj 311 Dm311 Gemcitabine 1Gm Inj 312 Dm312 Ibandronate 6Mg Inj 313 Dm313 Irinotecam 100Mg Inj 314 Dm314 Irinotecan 40Mg Inj 315 Dm315 Itolizumab 100Mg Inj316 Dm316 Kadcycla 100Mg Inj 317 Dm317 Kadcycla 160Mg Inj 318 Dm318 Lenalidomide 10Mg Tab 319 Dm319 Lenalidomide 20Mg Tab 320 Dm320 Leucovorine 50Mg Inj 321 Dm321 Liposomal Doxorubicin 50Mg 322 Dm322 Methottrexate 15 Mg, 1Ml Inj Preservative Free 323 Dm323 Mitomycin 10Mg Inj 324 Dm324 Oxaliplatin 50Mg Inj 325 Dm325 Oxaliplatin 100Mg Inj 326 Dm326 Paclitaxel 100Mg Inj 327 Dm327 Paclitaxel 100Mg Protein Bound Inj 328 Dm328 Paclitaxel 30Mg Inj 329 Dm329 Palonosetron Hcl 0.25Mg / 5Ml Inj 330 Dm330 Pegfilgrastim 6Mg Inj 331 Dm331 Pembrolizumab 100Mg Inj 332 Dm332 Rasburicase 1.5Mg Inj 333 Dm333 Rituximab 100Mg Inj 334 Dm334 Rituximab 500Mg Inj335 Dm335 Trastuzumab 440Mg Inj 336 Dm336 Panitumumab 100Mg Inj 337 Dm337 Vinblastin Inj 10Mg Inj 338 Dm338 Vincristine 1Mg / 1Ml Inj 339 Dm339 Zoledronic Acid 4Mg Inj 340 Dm340 Ascorbic Acid ( Vit C ) +Biotin+Cholecalciferol ( Vit D3 ) +Elemental Manganese+Elemental Zinc+Iodine+L Lysine+Molybdenum+Tocopheryl ( Vit E ) +Vitamin A+Vitamin B2+Vitamin B5 341 Dm341 Brinzolamide 1%W / V, Timolol 0.5%W / V Eye Drop 342 Dm342 Ciprofloxacin 0.3%W / V Eye / Ear Drop 343 Dm343 Ferrous Ascorbate 10Mg + Folic Acid 100Mcg / Ml, 15Ml Drop 344 Dm344 Hydroxypropylmethyl Cellulose 0.3%W / V Drop 345 Dm345 Sodium Hyaluronate 0.1%W / V, Drop 346 Dm346 Cholecalciferol 800Iu / Ml , 15Ml Drop 347 Dm347 Naphazoline ( 0.1% W / V ) + Chlorpheniramine Maleate ( 0.01% W / V ) + Methylcellulose ( 0.2% W / V ) 348 Dm348 Sodium Chloride 0.9%W / W , 20 Ml 349 Dm349 Nepafenac 0.1%W / V 350 Dm350 Camphor 0.01 %+Chlorpheniramine 0.1 %+Menthol 0.005 %+Naphazoline 0.05 %+Phenylephrine 0.12 % 351 Dm351 Sorbitol 2%+Xylometazoline 0.1% 352 Dm352 Oxymetazoline Hydrochloride 0.05 %W / V 353 Dm353 Xylometazoline 0.05% 354 Dm354 Carboxy Methyl Cellulose 0.5 % 355 Dm355 Polyvinyl Alcohol 14 Mg+Povidone 6 Mg , 10 Ml 356 Dm356 Phenylephrine+Tropicamide , 3 Ml 357 Dm357 Moxifloxacin 0.5%W / V 358 Dm358 Hydroxypropyl Methylcellulose ( Hpmc ) 0.7 % 359 Dm359 Salbutamol 100Mcg Inhaler 360 Dm360 Budesonide 200Mcg Inhaler 361 Dm361 Levosalbutamol 50Mcg +Ipratropium 20Mcg Inhaler 362 Dm362 Formoterol 6Mcg + Budesonide 200Mcg Inhaler 363 Dm363 Lidocaine 10% W / V 364 Dm364 Salmeterol 25Mcg + Fluticasone Propionate 250Mcg Inhaler 365 Dm365 Tiotropium 9Mcg Inh 366 Dm366 Zerostat Vt Spacer With Flow Gate Valve 367 Dm367 Desmopressin 0.1Mg / Ml Nasal Spray 368 Dm368 Magnesium Chloride Hexahydrate, Sodium Chloride, Sodium Hydrogen Carbonate, Potassium Chloride, Disodium Phosphate Dihydrate369 Dm369 Dextrose 50%W / V 100Ml 370 Dm370 Dextrose 10% 500Ml Plastic Bottle 371 Dm371 Dextrose 25%100Ml Plastic Bottle 372 Dm372 Dextrose 5% 500Ml Glass Bottle 373 Dm373 Dextrose 5% 500Ml Plastic Bottle 374 Dm374 Sodium Chloride 0.33G+Dextrose Anhydrous 5G+Water For Inj Q.S / 100Ml, 500Ml Glass Bottle 375 Dm375 Dns 0.45% 500Ml Glass Bottle 376 Dm376 Sodium Chloride 0.9G+Dextrose Anhydrous 5G / 100Ml , 500Ml Plastic Bottle 377 Dm377 Glycine 1.5% W / V 3Ltr 378 Dm378 Sodium Acetate 0.28G+Sodium Chloride 0.4G+Potassium Chloride 0.15G+Dibasic Potassium Phosphate 0.013G+Dextrose Anhydrous 5G+Water For Inj Q.S / 100Ml , 500Ml Plastic Bottle 379 Dm379 Sodium Acetate 0.32G+Potassium Chloride 0.13G+Dibasic Potassium Phosphate 0.026G+Magnesium Chloride 0.01G+Dextrose Anhydrous 5G+Water For Inj Q.S / 100Ml , 500Ml Plastic Bottle 380 Dm380 Mannitol 20%W / V 100Ml 381 Dm381 Metronidazole 500Mg / 100Ml Plastic Bottle 382 Dm382 Normal Saline 0.9% W / V 500Ml Glass Bottle 383 Dm383 Normal Saline 0.9% W / V 500Ml Plastic Bottle 384 Dm384 Normal Saline 0.9% W / V 1000Ml Plastic Bottle 385 Dm385 Normal Saline 0.9%W / V 100Ml Plastic Bottle 386 Dm386 Normal Saline 0.9% W / V 3Ltr Plastic Bottle 387 Dm387 Sodium Chloride 0.526G+Sodium Gluconate 0.502G+Sodium Acetate Trihydrate 0.368G+Potassium Chloride 0.037G+Magnesium Chloride Hexahydrate 0.030G+Water For Inj Q.S / 100Ml , 500Ml Plastic Bottle 388 Dm388 Sodium Lactate 0.32G+Potassium Chloride 0.04G+Calcium Chloride 0.027G+Sodium Chloride 0.6G+Water For Inj Q.S / 100Ml, 500Ml Plastic Bottle 389 Dm389 Sodium Chloride 0.45%W / V 500 Ml Glass Bottle 390 Dm390 Sodium Chloride 3%W / V 100Ml Glass Bottle 391 Dm391 Normal Saline 0.9% W / V 500Ml, Viaflex 392 Dm392 Acyclovir ( 5% W / W ) 393 Dm393 Phenylephrine ( 0.10% W / W ) + Beclometasone ( 0.025% W / W ) + Lidocaine ( 2.50% W / W ) 394 Dm394 Gabapentin ( 8% W / W ) + Capsaicin Based Rubefacients ( 0.025% W / W ) + Ketoprofen ( 5% W / W ) + Methyl Salicylate ( 5% W / W ) 395 Dm395 Povidone Iodine ( 10% W / W ) , 20 Gm 396 Dm396 Beclometasone ( 0.025% W / W ) + Clotrimazole ( 1% W / W ) , 10 Gm 397 Dm397 Clotrimazole ( 1% W / V ) 398 Dm398 Clobetasol Propionate 15 Gm 399 Dm399 Ostomy Paste 60 Gm 400 Dm400 Hydrocortisone ( 0.25% W / W ) + Crotamiton ( 10% W / W ) 401 Dm401 Diltiazem 2% Oint. 30Gm 402 Dm402 Fluticasone Furoate 0.05%W / W 403 Dm403 Sodium Fusidate 2% 404 Dm404 Fusidic Acid 2 %+Mometasone 0.1 %405 Dm405 Ammonium Chloride 0.5 %W / W+Calcium Lactate 0.5 %W / W+Glycerin 3 %W / W+Lactic Acid 6 %W / W+Magnesium Chloride 0.3 %W / W+Potassium Chloride 0.5 %W / W+Sodium Chloride 0.5 %W / W+Sodium Dihydrogen Phosphate 0.5 %W / W+Urea 12 %W / W 406 Dm406 Betamethasone 0.5 Mg+Calcipotriol 50Mcg 407 Dm407 Triamcinolone Acetonide 0.1% 408 Dm408 Glycerin +Hydroxyethyl Cellulose 409 Dm409 Lignocaine ( Lidocaine ) 2 % , 30 Gm 410 Dm410 Luliconazole 1%W / W 10 Gm 411 Dm411 Magnesium Sulphate 64 %W / W+Phenol 0.5 %W / W 412 Dm412 Colloidal Silver 32 Ppm , 50 Gm 413 Dm413 Chlorhexidine Gluconate ( 0.5% W / W ) + Metronidazole ( 1.5% W / W ) 414 Dm414 Lactic Acid 10%+Liquid Paraffin 10%+Propylene Glycol 10%+Urea 10% 415 Dm415 Mometasone 0.1 % , 15 Gm 416 Dm416 Mometasone ( 0.1% W / W ) + Fusidic Acid ( 2% W / W ) 417 Dm417 Moxifloxacin 5Mg , 418 Dm418 Benzocaine ( 20% W / W ) 419 Dm419 Mupirocin 2%W / W , 5 Gm 420 Dm420 Bacitracin Zinc 400Units+Neomycin 3400Units+Polymyxin B 5000Units , 5 Gm 421 Dm421 Bacitracin ( 400Iu ) + Neomycin ( 3400Iu ) + Polymyxin B ( 5000Iu ) , 15 Gm 422 Dm422 Triamcinolone ( 0.1% W / W ) 423 Dm423 White Soft Paraffin ( 13.2 % ) + Liquid Paraffin ( 10.02 % ) 424 Dm424 Permethrin ( 5% W / W ) 425 Dm425 Terbinafine ( 1% W / W ) 30 Gm 426 Dm426 Calamine 1.5%+Cetrimide 0.01125+Dimethicone 0.2+Zinc Oxide 0.075 427 Dm427 Silver Nitrate 0.2% , 20 Gm 428 Dm428 Framycetin Sulphate 1 % , 30 Gm 429 Dm429 Clobetasol Propionate 0.05 % , 30 Gm 430 Dm430 Benzyl Nicotinate 2Mg+Heparin Sodium 50 Iu , 20 Gm 431 Dm431 Diclofenac+Linseed Oil+Menthol+Methyl Salicylate , 30 Gm 432 Dm432 Choline Salicylate 9 %+Benzalkonium Chloride 0.02 % , 10 Ml 433 Dm433 Turpentine Oilnilgiri Oilwintergreen Oilmint Extract , 15 Gm Ointment 434 Dm434 Clotrimazole 1 % Powder 435 Dm435 Phosphorus 1.936Gm 436 Dm436 200Gm Contains : Protein 69.9 G, Fat 4 G, Dietary Fiber 3 G, L-Arginine 1.5 G, L-Glutamine 1 G, Histidine 1475 Mg, Isoleucine 3710 Mg, Leucine 5516 Mg, Lysine 4457 Mg, Methionine 2253 Mg, Phenylalanine 3822 Mg, Threonine 2982 Mg, Tryptophan 803 Mg, Valine 4177 Mg / 100 G. 437 Dm437 Each 100 Gm Powder Contain Vit B6 2 Mg, Vit C 40 Mg , Vit D 10 Mg , Vit E 10 Mg , Calcium 95 Mg , Magnesium 160 Mg , Iron 25 Mg , Magneese 175 Mg , Copper 125 Mg , Zinc 1 Mg , Molybdenum 50 Mcg , Chronium 62.5 Mcg , Ipdine 75 Mcg , Selenium 32.5 Mcg, Isolucine 4299 Mg Leucine 6150 Mgvaline 5193 Mg 438 Dm438 Cholecalciferol 60000 Iu / Gm Nano 439 Dm439 Cholestyramine 4 Gm440 Dm440 Spaghula 4.8Gm 441 Dm441 Saccharomyces Boulardii ( 250Mg ) 442 Dm442 Wheay Protein Isolate 4200 Mg, Valine 1250 Mg , Leucine 2500 Mg , Isoleucine 1250 Mg 443 Dm443 Maltodextrincalcium Caseinateedible Vegetable Oils ( High Oleic Sunflower Oil, Soy Oil ) Fructose, Cocoa Powderfructooligosaccharide ( Fos ) Soy Polysaccharidem-Inositolvitaminsantioxidants ( Soy Lecithin, Mixed Tocopherols ) Taurinel-Carnitinesucralosewith Diabetic Formula 444 Dm444 Maltodextrinsodium And Calcium Caseinatessucroseedible Vegetable Oil ( High Oleic Sunflower Oil, Soy Oil, And Coconut Oil ) Soy Protein Isolatefructooligosaccharidesmineralsvitamins 445 Dm445 Whey Protein, Soya Protein, Malto Dextrin, Skimmed Milk Powder, Vitamines, Minerals, L-Carnitine, L-Taurine 446 Dm446 Fosfomycin 3G Sachet 447 Dm447 Lactitol Monohydrate 10G + Ispaghula Husk 3.5G / 10G, 150G Pack 448 Dm448 L-Ornithine L-Aspartate Granules 3G / 5G Sachet 449 Dm449 Maltodextrin, Sucrose, Whey Protein Concentrate, Vegetable Fat Powder Containing Permitted Anti-Oxidant, Minerals, Sodium Caseinate And Vitamins, Contains Added Flavour 450 Dm450 L-Leucine, L-Isoleucine, L-Valine ( Bcaas ) 10G 451 Dm451 L-Valine 1144Mg+ L-Isoleucine 952Mg +L-Leucine 1904Mg / 10 Sachet 452 Dm452 Calcium Polystyrene Sulphonate 15G Sachet 453 Dm453 Whey Protein Concentrate 80%, Skimmed Milk Powder, Maltodextrin, High Oleic Acid Sunflower Oil Powder, Choline Bitartrate, S-Adenosyl Methionate, Minerals, Alpha Lipoic Acid, Sweetner ( Ins 955 ) , Vitamins, Taurine 454 Dm454 Maltodextrin, Milk Powder, High Oleic Sunflower Oil Powder ( 75% ) , Minerals, Vitamins, Whey Protein Concentrate 80%, Cholin Bitartate, S-Adenosyl Methionate, Alpha Lipoic Acid, Taucine 455 Dm455 Lactitol Monohydrate 10G + Ispaghula Husk 3.5G / 10G, 90G Pack 456 Dm456 Polyethylene Glycol 3350 8.5G Sachet 457 Dm457 Polyethylene Glycol 3350 17G Sachet 458 Dm458 L-Isoleucine 952 Mg , L-Leucine 1904 Mg And L-Valine 1144 Mg , 10 Gm 459 Dm459 L-Ornithine L-Aspartate ( 3Gm ) 460 Dm460 Polyethylene Glycol ( 6.563G ) , Sodium Chloride ( 175.4Mg ) , Sodium Bicarbonate ( 89.3Mg ) Potassium Chloride 23.3 Mg 461 Dm461 Polyethylene Glycol ( 13.185G ) , Sodium Chloride ( 350.7Mg ) , Sodium Bicarbonate ( 178.5 Mg ) Potassium Chloride 46.6 Mg 462 Dm462 Each 100 Gm Contains Milk Protein 10.7 , 463 Dm463 Isapgol Fibre 100 Gm 464 Dm464 Neomycin Sulphate 5 Mg+Bacitracin 250 Iu+Sulphacetamide Sodium 60 Mg 465 Dm465 Bacitracin 400Iu+Neomycin 3400Iu+Polymyxin B 5000Iu , 10 Gm 466 Dm466 Maltodextrin, Edible Vegetable Oil, Milk Protein Concentrate, Whey Protein Concentrate, Calcium Caseinate, Sucrose, Fructo-Oligosacharides, Flavoring Minerals, Anti Oxidants, Vitamins, L-Carnitine, Taurine 467 Dm467 Fat Emulsion Owder, Maltodextrin, High Oleic Acid Sunflowerseed Oil, Low Erucic Acid Rapeseed Oil, Minerals, Choline Hydrogen Tartrate, Emulsifier, Stabilizer ( 340I ) , L-Carnitine, Vitamins, Maltodextrin, Sugar, Amino Acid Premix. 468 Dm468 Each 100 Gm Powder Contains Protein 63.5 Gm Carbohydrate 20.5 Gm, Saturated Fatty Acid 2.85 Gm , Poly Saturate Fatty Acid 0.17 Gm , Momoounsaturaed Fatty Acid 1.17 G 1.17 G, Trans Fatty Acid 0.16 G Cholestrol 140 Mg Vit A 225 Mcg, Vit D 0.5 Mcg , Vit E 23 Mg , Vit K20 Mcg, Vit C25 Mg , Vit B1 0.56 , Vit B2 0.64 Mg Vit B6 2 Mg , Vit B12 2.3 Mcg , Niacin 7.5 Mg , Folic Acid 250 Mcg Panlothenic Acid 3.8 Mg Biotin 45 Mcg, L- Camitine 63 Mg , Taunine 38 Mg , Calcium 390 Mg , Phosphorus 350 Mg , Magnesium 60 Mg , Sodium 150 Mg , Potassium 510 Mg 469 Dm469 Each 100 Gm Powder Contains Protein 42 Gm , Fat 3.3 Gm, Saturated Fatty Acid 2.1 Gm , Poly Saturate Fatty Acid 0.1 Gm , Momoounsaturaed Fatty Acid 0.8 G , Trans Fatty Acid 0.1 G Cholestrol 75 Mg , Carbohydrate 45 Gm , Calcium 600 Mg , Phosphorus 410Mg , Magnesium 60 Mg , Sodium 200 Mg , Potassium 490 Mg 470 Dm470 Oral Rehydration Salt-Sodium Chloride 2.6G, Potassium Chloride 1.5G, Sodium Citrate 2.9G, Dextrose ( Anhydrous ) 13.5G, Excipients Q.S / 21G Sachet 471 Dm471 Ostomy Powder 25 Gm 472 Dm472 Polyethylene Glycol 118 Gm+Sodium Chloride 2.03 Gm+Potassium Chloride 1.484 Gm+Sodium Bicarbonate 3.370 Gm 473 Dm473 Polyethylene Glycol 3350 Nf 17G / Two Measuring Spoon, 121.1 G 474 Dm474 Maltodextrin, Whey Protein Hydrolysate ( 21.2% ) , Sugar, Medium Chain Triglyceride Oil ( 12.5% ) , Potato Starch, Soyabean Oil, Minerals, Emulsifier ( Soya Lecithin ) , Acidity Regulators ( 525, 330 & 5241 ) , Vitamins, Choline Hydrogen Tartrate, Taurine And L-Carnitine, Vitamins ) 475 Dm475 Potassium Permagnate ( Kmno4 ) Powder 476 Dm476 Whey Protein Isolate; Prebiotic Fibers; Medium Chain Triglycerides; Vitamin E; Minerals. Sunflower Seed Oil 477 Dm477 Whey Protein478 Dm478 Whey Protein Concentrate 45%, Skimmed Milk Powder 40%, Maltodextrin And Insulin 479 Dm479 Sodium Benzoate 20G Powder 480 Dm480 Isabgol, Sonamukhi, Harad, Mulethi, Gulab Dal ( Ingredient ) , Amaltas, And Saunf 481 Dm481 Casein+Proteins+Soya+Sucrose Biscuit 482 Dm482 Casein And Whey Protein. All Essential Amino Acids, Fibre, B Vitamins And Antioxidants Containg Biscuit 483 Dm483 L Isoleucine 1.2 Gm+L Leucine 2.3 Gm+L Valine 1.5 Gm 484 Dm484 Lactobacillus Rhamnosus 6 Billions , 485 Dm485 Sat - Isabgoal 486 Dm486 Bisacodyl Suppository 10Mg Suppository 487 Dm487 Clindamycin 100Mg + Clotrimazole 200Mg Suppository 488 Dm488 Glycerin Suppository 489 Dm489 Paracetamol 125 Suppository 490 Dm490 Diclofenac Suppository 491 Dm491 Multivitamin, Multimineral Syrup 200Ml 492 Dm492 Albendazole 400Mg / 10Ml Oral Suspension 493 Dm493 Disodium Hydrogen Citrate 1.4G / 5Ml, 100Ml Syrup 494 Dm494 Ambroxol 15Mg +Salbutamol 1Mg / 5Ml, 100Ml Syrup 495 Dm495 Ambroxol ( 30Mg ) + Guaifenesin ( 50Mg ) + Menthol ( 0.5Mg ) + Terbutaline ( 1.25Mg ) 496 Dm496 Ambroxol Hcl 30Mg / 5Ml, 100Ml Syrup 497 Dm497 Quduchi 75Mg+Saunt 37.5Mg+Kutki 37.5Mg+Vidanga 18.75Mg+Nagarmotha 18.75Mg+Jeera 18.75Mg+Pippali 18.75Mg+Amalaki 18.75Mg+Yavani 18.75Mg+Preservatives / 5Ml, 175Ml Syrup 498 Dm498 Dastase 50Mg+Pepsin 10Mg / 5Ml, 200Ml Syrup 499 Dm499 Hydroxyzine 10Mg / 5Ml, 100Ml Syrup 500 Dm500 Amoxycillin 200Mg + Clavulanic Acid / 5Ml Syrup 501 Dm501 Azithromycin 200Mg Syrup 502 Dm502 Diphenhydramine 14.08Mg+Ammonium Chloride 138Mg+Sodium Citrate 57.03Mg / 5Ml, 100Ml Syrup 503 Dm503 Povidone Iodine 2% W / V 100Ml Syrup 504 Dm504 Bromhexine 4Mg / 5Ml , 100Ml Syrup 505 Dm505 Lactulose 10G+ Wheat Dextrin 3.5G +Fructo Oligo Sacharides 2.5 + Polydextrose 2.1G +Energy+Protein+Carbohydrate 13.854G+ Total Dietary Fiber 8.1G / 20Ml, 100Ml Syrup 506 Dm506 Phenylephrine ( 5Mg / 5Ml ) + Chlorpheniramine Maleate ( 2Mg / 5Ml ) + Dextromethorphan Hydrobromide ( 10Mg / 5Ml ) 507 Dm507 Chlorpheniramine Maleate 4Mg + Codeine 10Mg / 5Ml , 100Ml Syrup 508 Dm508 Polyethylyne Glycol 13.125G+ Sodium Chloride 0.3507G+ Sodium Hydrogen Carbonate 0.1785G +0.0466G / 25Ml Syrup 509 Dm509 Liquid Paraffin 3.75Ml + Milk Of Magnesia 11.25Ml / 15Ml , 225Ml Syrup510 Dm510 Sodium Picosulfate ( 3.33Mg ) + Liquid Paraffin ( 1.25Ml ) + Milk Of Magnesia ( 3.75Ml ) 511 Dm511 Magnesium Hydroxide 185Mg+ Simethicone 50Mg+Sodium Methyl Carboxymethylcellulose 100Mg+ Dried Aluminium Hydroxide 830Mg / 10Ml, 200Ml Syrup 512 Dm512 Domperidone 1Mg / Ml , 30Ml Syrup 513 Dm513 Ferrous Ascorbate 30Mg / 5Ml , 150Ml Syrup 514 Dm514 Furosemide 10Mg / Ml, 30Ml Syrup 515 Dm515 Phenobarbitone 20Mg / 5Ml, 100Ml Syrup 516 Dm516 Activated Dimethicone Ip 50 Mg, Magnesium Hydroxide Ip 250 Mg, Dried Aluminium Hydroxide Ip 250 Mg, Magnesium Aluminium Silicate Hydrate 50 Mg. 517 Dm517 Terbutaline 2.5Mg+Bromhexine 8Mg / 5Ml , 100Ml Syrup 518 Dm518 Ammonium Chloride ( 60Mg / 5Ml ) + Chlorpheniramine Maleate ( 2.5Mg / 5Ml ) + Dextromethorphan Hydrobromide ( 5Mg / 5Ml ) + Guaifenesin ( 50Mg / 5Ml ) 519 Dm519 Citric Acid ( 334Mg / 5Ml ) + Potassium Citrate ( 1100Mg / 5Ml ) 520 Dm520 Lactitol 10G / 15Ml, 200Ml Syrup 521 Dm521 Lactitil 66.67%W / V, 200Ml Syrup 522 Dm522 Lactulose 10G , 200Ml Syrup 523 Dm523 Chlorpheniramine Maleate ( 2Mg / 5Ml ) + Phenylephrine ( 5Mg / 5Ml ) 524 Dm524 Mefenamc Acid 100Mg / 5Ml, 60Ml Syrup 525 Dm525 Metronidazole 200Mg / 5Ml , 60Ml Syrup 526 Dm526 Oxetacaine ( 10Mg / 5Ml ) + Aluminium Hydroxide ( 0.291Gm / 5Ml ) + Milk Of Magnesia ( 98Mg / 5Ml ) 527 Dm527 Iodised Peptone 0.322Mg+Magnesium Chloride 6.67Mg+ Magnesium Sulphate 1.33Mg +Zinc Sulphate 10.21Mg + 528 Dm528 Nitazoxanide 100Mg / 5Ml, 30Ml Syrup 529 Dm529 Potassium Citrate 1100Mg+ Magnesium Citrate 37.5Mg+Pyridoxine 20Mg / 5Ml, 200Ml 530 Dm530 Ofloxacin Syrup 531 Dm531 Prednisolone 25Mg / 5Ml, 60Ml Syrup 532 Dm532 Alpha Galactosidase 25Mg+Diastase 1:1200 ) 50Mg + Pepsin ( 1:3000 ) 10Mg+ Lipase 10Mg / 5Ml, 100Ml Syrup 533 Dm533 Paracetamol 120Mg / 60Ml Syrup 534 Dm534 Paracetamol 240Mg / 60Ml Syrup 535 Dm535 Triclofos 500Mg / 5Ml, 30Ml Syrup 536 Dm536 Promethazine 5Mg / 5Ml, 30Ml Syrup 537 Dm537 Cyanocobalamin 2 Mcg+D-Panthenol 3 Mg+Niacinamide 15 Mg+Pyridoxine 0.75 Mg+Riboflavine 2.5 Mg+Thiamine 2 Mg / 5Ml, 100Ml 538 Dm538 Posaconazole 40Mg / Ml , 105Ml Syrup 539 Dm539 Potassium Chloride 1.5Gm / 15Ml, 200Ml Syrup 540 Dm540 Cyproheptadine 2Mg / 5Ml, 200Ml Syrup 541 Dm541 Levodropropizine 30Mg / 5Ml, 100Ml Syrup 542 Dm542 Rifampicin 100Mg / 5Ml, 200Ml Syrup 543 Dm543 Rifaximin 100Mg / 5Ml, 60Ml Syrup 544 Dm544 Sulphamethoxazole 200Mg+Trimethoprim 40Mg, 50Ml Syrup 545 Dm545 Elemental Calcium 250Mg And Vitamin D3 125Iu / 5Ml, 200Ml Syrup 546 Dm546 Medium Chain Triglycerides Oil + Permitted Anti-Oxidant ( Tocopheryl Acetate ) , Total Fat 94.5G, Energy 780Kcal, 100Ml Syrup580 Dm580 Glimepride 2Mg +Metformin Hcl500mg 581 Dm581 Amiloride ( 5.0 Mg ) + Frusemide / Furosemide ( 40.0 Mg ) 582 Dm582 Amiodarone Hcl 200M 583 Dm583 Amlodipine 5Mg 584 Dm584 Amoxycillin / Amoxicillin ( 500.0 Mg ) + Clavulanic Acid ( 125.0 Mg ) 585 Dm585 Amlodipine ( 5.0 Mg ) Atenolol ( 50.0 Mg ) 586 Dm586 Selenium ( 200.0 Mcg ) + Elemental Zinc ( 12.0 Mg ) + Vitamin A / Retinol ( 1800.0 Mcg ) + Dl Methionine ( 600.0 Mg ) + Elemental Manganese ( 1.3 Mg ) + Vitamin E / Tocopherol ( 10.0 Mg ) 587 Dm587 L-Methionine ( 550.0 Mg ) + Betacarotene ( 3000.0 Iu ) + Vitamin C / Ascorbic Acid ( 40.0 Mg ) + Selenium ( 200.0 Mcg ) + Vitamin E / Tocopherol ( 10.0 Mg ) 588 Dm588 Beta-Carotene 1 Mg+Chromium Picolinate 0.2 Mg+Copper Sulphate 0.8 Mg+Elemental Zinc 27.45 Mg+Glycine 25 Mg+L-Cysteine 46.37 Mg+L-Glutamic Acid 40 Mg+Magnesium Sulphate 11.5 Mg+Manganese Sulphate 1.12 Mg+Pyridoxine 0.4 Mg+Sodium Selenite 0.1 Mg+Spirulina 175 Mg+Vitamin A 5000 Iu+Vitamin C 75 Mg+Vitamin E 10 Iu 589 Dm589 Vitamin A 25000 Iu 590 Dm590 Hydrochlorothiazide 12.5 Mg 591 Dm591 Clonidine 100 Mcg 592 Dm592 S-Amlodipine 5 Mg 593 Dm593 Hydroxyzine Hydrochloride 25 Mg 594 Dm594 Atenolol 25 Mg 595 Dm595 Lorazepam 1 Mg 596 Dm596 Atorvastatin 10 Mg 597 Dm597 Atorvastatin 10 Mg+Fenofibrate 145 Mg 598 Dm598 Atorvastatin 5 Mg 599 Dm599 Amoxicillin 875 Mg+Clavulanic Acid 125 Mg 600 Dm600 Vitamin B9 / Folic Acid / Folate ( 1.5 Mg ) + Vitamin B12 / Mecobalamin / Cynocobalamin / Methylcobalamin ( 15.0 Mcg ) + Ferrous Fumarate ( 300.0 Mg ) 601 Dm601 Pheniramine Maleate 25Mg Tab 602 Dm602 Azithromycin 500Mg 603 Dm603 Azathioprine 50 Mg 604 Dm604 Albendazole 400 Mg+Ivermectin 6 Mg 605 Dm605 Thiamine Moninitrate ( 10.0 Mg ) + Vitamin B2 / Riboflavin ( 10.0 Mg ) + Vitamin B3 / Nicotinic Acid / Niacin ( 100.0 Mg ) + Vitamin B6 / Pyridoxine ( 3.0 Mg ) + Vitamin B12 / Mecobalamin / Cynocobalamin / Methylcobalamin ( 15.0 Mcg ) + Vitamin B7 / Biotin / Vitamin H ( 100.0 Mcg ) + Calcium Pantothenate ( 50.0 Mg ) + Vitamin B9 / Folic Acid / Folate ( 1.5 Mg ) + Vitamin C / Ascorbic Acid ( 150.0 Mg ) 606 Dm606 Vitamin B3 / Nicotinic Acid / Niacin ( 100.0 Mg ) + Vitamin B1 / Thiamine ( 10.0 Mg ) + Pyridoxine Hydrochloride ( 3.0 Mg ) + Calcium Panthothenate ( 50.0 Mg ) + Zinc Sulphate Monohydrate ( 41.4 Mg ) + Vitamin B7 / Biotin / Vitamin H ( 100.0 Mcg ) + Vitamin C / Ascorbic Acid ( 150.0 Mg ) + Vitamin B9 / Folic Acid / Folate ( 1.5 Mg ) + Vitamin B12 / Mecobalamin / Cynocobalamin / Methylcobalamin ( 15.0 Mcg ) + Vitamin B2 / Riboflavin ( 10.0 Mg ) 607 Dm607 Pyridoxin Hydrochloride 40Mg 608 Dm608 Benfotiamine 100 Mg609 Dm609 Alpha Lipoic Acid 50 Mg+Benfotiamine 150 Mg+Chromium Picolinate 100 Mcg+Inositol 75 Mg+Methylcobalamin 1500 Mcg+Omega-3 Fatty Acid 500 Mg 610 Dm610 Ginkgo Biloba Extract ( 10.0 Mg ) + L Carnitine L Tartrate ( 50.0 Mg ) + Vitamin D3 / Cholecalciferol ( 400.0 Iu ) + Ginseng ( 100.0 Mg ) + Glycyrrhiza Glabra ( 10.0 Mg ) + Green Coffee Bean Extract ( 10.0 Mg ) + Co Enzyme Q 10 ( 100.0 Mg ) + Vitamin B12 / Mecobalamin / Cynocobalamin / Methylcobalamin ( 750.0 Mcg ) + Omega 3 Fatty Acid ( 250.0 Mg ) 611 Dm611 Betamethasone ( 1.0 Mg ) 612 Dm612 Betamethasone ( 0.5 Mg ) 613 Dm613 Metformin 500 Mg 614 Dm614 Streptococus Faecalis T-110 Jpc 30Million+ Clostridium Butyricum Bacillus 1Million+ Mesenericus To-A Jpc 1 Million+ Lactic Acid Bacillus 50Million Capsule 615 Dm615 Streptococus Faecalis T-110 Jpc 60Million+ Clostridium Butyricum Bacillus 4 Million+ Mesenericus To-A Jpc 2Million + Lactic Acid Bacillus 100Million Capsule 616 Dm616 Bilastine 20Mg 617 Dm617 Saroglitazar 4Mg 618 Dm618 Calcitriol 0.25 Mcg 619 Dm619 Calcitriol 0.25 Mcg+Calcium Carbonate 500 Mg+Docosahexaenoic Acid 120 Mg+Eicosapentaenoic Acid ( Epa ) 180 Mg+Elemental Boron 1.5 Mg+Folic Acid 400 Mcg+Methylcobalamin 1500 Mcg 620 Dm620 Calcitriol 0.25 Mcg+Elemental Calcium 200 Mg 621 Dm621 Bisoprolol 2.5Mg 622 Dm622 Solifenacin Succinate 5 Mg 623 Dm623 Calcitriol 0.25 Mcg+Elemental Calcium 200 Mg+Folic Acid 1.5 Mg+Methylcobalamin 1500 Mcg+Pyridoxine 3 Mg 624 Dm624 Budesonide 3 Mg 625 Dm625 Hyoscine Butylbromide 10 Mg 626 Dm626 Calcium Citrate ( 500.0 Mg ) + Vitamin D3 / Cholecalciferol ( 250.0 Iu ) 627 Dm627 Capecitabine 500Mg 628 Dm628 Ramipril 5 Mg 629 Dm629 Carvedilol 12.5Mg 630 Dm630 Carvedilol 3.125 Mg 631 Dm631 Carvedilol 6.25 Mg 632 Dm632 Carvedilol 20 Mg 633 Dm633 Cefuroxime 500 Mg 634 Dm634 Mycophenolate Mofetil 250 Mg 635 Dm635 Mycophenolate Mofetil 500Mg 636 Dm636 Everolimus 0.25 Mg 637 Dm637 Chlorpromazine 50 M 638 Dm638 Chlorthalidone 12.5Mg 639 Dm639 Trypsin-Chymotrypsin 200000 Au 640 Dm640 Cilnidipine 10 Mg 641 Dm641 Cilnidipine 10 Mg+Telmisartan 40 Mg 642 Dm642 Penicillamine 250 Mg 643 Dm643 Propranolol 10 Mg 644 Dm644 Propranolol 40Mg 645 Dm645 Propranolol 20 Mg 646 Dm646 Propranolol 40Mg Long Acting 647 Dm647 Ciprofloxacin 500 Mg 648 Dm648 Ciprofloxacin 500 Mg+Tinidazole 600 Mg649 Dm649 Serratiopeptidase 10 Mg 650 Dm650 S-Adenosyl Methionine 400 Mg 651 Dm651 Chlordiazepoxide 5 Mg+Mebeverine 135 Mg 652 Dm652 Clarithromycin 500 Mg 653 Dm653 Clobazam 5 Mg 654 Dm654 Clonazepam 0.25Mg 655 Dm655 Clopidogrel 75Mg 656 Dm656 Mebeverine 135 Mg 657 Dm657 Mebeverine Hydrochloride Retard 200Mg 658 Dm658 Paracetamol 325 Mg+Ibuprofen 400 Mg 659 Dm659 Ethambutol 1000 Mg 660 Dm660 Ethambutol 200 Mg 661 Dm661 Ethambutol 400 Mg 662 Dm662 Ethambutol 800 Mg 663 Dm663 Tamsulosin 0.4 Mg 664 Dm664 Trimethoprim 160 Mg+Sulphamethoxazole 800 Mg 665 Dm665 Escitalopram 5 Mg 666 Dm666 Sodium Picosulphate 10 Mg 667 Dm667 Pancreatin Minimicrospheres 150 Mg 668 Dm668 Pancreatin Minimicro Sphere 300Mg 669 Dm669 Pancreatin Minimicrospheres 400 Mg 670 Dm670 Coenzyme Q10 100 Mg+Levocarnitine 500 Mg+Lycopene 20 Mg 671 Dm671 Paracetamol 650Mg 672 Dm672 Paracetamol 500Mg 673 Dm673 Caffeine 50Mg+Paracetamol 650Mg 674 Dm674 Nano Curcumin ( 500.0 Mg ) + Piperine ( 5.0 Mg ) 675 Dm675 Cycloserin 250Mg 676 Dm676 Cyclosporin 100Mg 677 Dm677 Micronized Flavonoid Fraction 500 Mg 678 Dm678 Clindamycin 150 Mg 679 Dm679 Clindamycin 300 Mg 680 Dm680 Dexlansoprazole 60 Mg 681 Dm681 Dexamethasone 4 Mg 682 Dm682 Deflazacort 6 Mg 683 Dm683 Calcium Citrate 1000 Mg+Elemental Magnesium 22.5 Mg+Vitamin D3 250 Iu 684 Dm684 Nifedipine 5 Mg 685 Dm685 Etofylline 115 Mg+Theophylline 35 Mg 686 Dm686 Etofylline 231 Mg+Theophylline 69 Mg 687 Dm687 Dexamethasone 0.5 Mg 688 Dm688 Acetazolamide 250 Mg 689 Dm689 Diazepam 5Mg 690 Dm690 Magnesium Hydroxide I.P. 25Mg, Simethicone I.P. 25Mg, Dried Aluminum Hydroxide I.P. 300Mg And Magnesium Aluminium Silicate Hydrate 50 Mg. 691 Dm691 Diltiazem 30 Mg 692 Dm692 Diltiazem 60 Mg 693 Dm693 Diltiazem 90 Mg 694 Dm694 Trypsin 96 Mg+Bromelain 180 Mg+Rutoside Trihydrate 200 Mg 695 Dm695 Acetylsalicylic Acid ( 325.0 Mg ) 696 Dm696 Divalproex 500Mg Tablet 697 Dm697 Digoxin 0.25 Mg 698 Dm698 Domperidone 10 Mg 699 Dm699 Doxofylline 400 Mg 700 Dm700 Doxycycline 100 Mg+Lactobacillus 5 Billion Spores 701 Dm701 Drotaverine 40 Mg 702 Dm702 Drotaverine 80 Mg703 Dm703 Drotaverine 80 Mg+Mefenamic Acid 250 Mg 704 Dm704 Bisacodyl 5 Mg 705 Dm705 Equivalent To Iron 500 Mg+Sucroferric Oxyhydroxide 25000 Mg 706 Dm706 Torsemide 10 Mg 707 Dm707 Torsemide 20 Mg 708 Dm708 Torsemide 40 Mg 709 Dm709 Torsemide 5 Mg 710 Dm710 Torsemide 10 Mg+Spironolactone 50 Mg 711 Dm711 Torsemide 5 Mg+Spironolactone 50 Mg 712 Dm712 Saccharomyces Boulardii 250 Mg 713 Dm713 Atorvastatin 10 Mg+Aspirin 75 Mg 714 Dm714 Aspirin 75 Mg 715 Dm715 Efavirenz 600 Mg 716 Dm716 Cyanocobalamin 15 Mcg+Methyltetrahydrofolate 1.5 Mg+S-Adenosyl Methionine 400 Mg 717 Dm717 Alpha-Tocopherol 400 Mg+Omega-3 Fatty Acid 500 Mg 718 Dm718 Biotin 300 Mcg+Calcium Pantothenate 6 Mg+Elemental Iron 200 Mg+Folic Acid 10 Mg+Methylcobalamin 500 Mcg+Niacinamide 25 Mg+Pyridoxine 10 Mg+Riboflavine 3 Mg+Thiamine 2 Mg+Vitamin C 50 Mg 719 Dm719 Apixaban 2.5 Mg 720 Dm720 Thyroxine Sodium 75 Mcg 721 Dm721 Ondansetron 4 Mg 722 Dm722 Entecavir 0.5Mg 723 Dm723 Enalapril 2.5 Mg 724 Dm724 Enalapril 5 Mg 725 Dm725 Bacillus Clausii 2 Billion Spores 726 Dm726 Phenytoin 100Mg 727 Dm727 Esomeprazole 40 Mg+Itopride 150 Mg 728 Dm728 Esomeprazole 40 Mg 729 Dm729 Esomeprazole 40 Mg+Levosulpiride 75 Mg 730 Dm730 Esomeprazole 20 Mg+Domperidone 30 Mg 731 Dm731 Lecithin 1000 Mg 732 Dm732 Ethionamide 250Mg 733 Dm733 Etizolam 0.5Mg Tab 734 Dm734 Repaglinide 0.5 Mg 735 Dm735 Everolimus 10 Mg 736 Dm736 Everolimus 5 Mg 737 Dm737 Vitamin E / Tocopherol 200 Mg 738 Dm738 Vitamin E / Tocopherol ( 400.0 Mg ) 739 Dm739 Vitamin E / Tocopherol ( 200.0 Mg ) + L-Carnitine / Levocarnitine / Carnitine ( 150.0 Mg ) 740 Dm740 Favipiravir 400Mg 741 Dm741 Famotidine 20Mg 742 Dm742 Famotidine 40Mg 743 Dm743 Faropenem 200Mg 744 Dm744 Febuxostat 40Mg 745 Dm745 Carbonyl Iron 50Mg+Zinc Sulphatemonohydrate 61.8Mg+Folic Acid 0.5Mg+ 746 Dm746 Fenofibrate 145Mg 747 Dm747 Ferrous Ascorbate 100Mg +Folic Acid 1.5Mg 748 Dm748 Fexofenadine 180Mg 749 Dm749 Trimetazidine Modified Release 35Mg 750 Dm750 Ibuprofen 400Mg+Paracetamol 325Mg +Chlorzoxazone 250Mg 751 Dm751 Fludrocortisone 100Mcg 752 Dm752 Fluoxetine 20Mg 753 Dm753 Flunarizine 10 Mg754 Dm754 Fluconazole 150Mg 755 Dm755 Fluconazole 200Mg 756 Dm756 Cefuroxime 250Mg 757 Dm757 Gabapentin 100Mg 758 Dm758 Gabapentin 300Mg 759 Dm759 Itopride 50Mg 760 Dm760 Itopride Hydrochloridesustained Release 150Mg 761 Dm761 Enteric Coated Pantoprazole Sodium 40Mg + Itopride Hydrochloride Sustained Release 150Mg 762 Dm762 Garlic Pearls 763 Dm763 Calcitrol 0.25Mcg+Calcium Carbonate 500Mg +Zinc 7.5Mg 764 Dm764 Gliclazide 40Mg 765 Dm765 Gliclazide 80Mg 766 Dm766 Glimepride 1Mg + Metformin 500Mg 767 Dm767 Metformin Hydrochloride Prolonged Release 500Mg +Glimepride 2Mg 768 Dm768 Metformin Hydrochloride Prolonged Release 500Mg +Glimepride 1Mg 769 Dm769 Metformin 500Mg Sustained Release 770 Dm770 Metformin 850Mg Sustained Release 771 Dm771 Clidinium 2.5Mg +Chlordiazepoxide 5Mg + Dicyclomine 10Mg 772 Dm772 Midodrine 2.5Mg 773 Dm773 Minerals, Diluent, Vitaminscholine Bitartrate, Stabilizer ( Ins1201 ) , Gildant, Anti Caking Agent 774 Dm774 Calcium Pantothenate 2.5Mg +Carnitine 50Mg +Elemental Zinc 5Mg+Folic Acid 0.05Mg+L-Ornithine -L-Aspartate 50Mg+Lecithin 75Mg+N-Acetylcysteine 50Mg+Silymarin 200Mg +Vitamin B1 0.8Mg+Vitamin B2 1Mg+Vitamin B6 1Mg +Vitamin C 20Mg+Vitamin D3 200Iu+Vitamin E 5Iu 775 Dm775 Combination Of Amoxycillin 750Mg+Tinidazole 500Mg +Omeprazole 20Mg 776 Dm776 Hydroxy Chloroquine 400Mg 777 Dm777 Hydroxyurea 500Mg 778 Dm778 Ramosetron 5 Microgram 779 Dm779 Imatinib 100Mg 780 Dm780 Loperamide 2Mg 781 Dm781 Indomethacin 25Mg 782 Dm782 Indomethacin 50Mg 783 Dm783 Midodrine 5Mg 784 Dm784 Benidipine 8Mg 785 Dm785 Isosorbide Mononitrate 10Mg 786 Dm786 Isosorbide Mononitrate 20Mg 787 Dm787 Isosorbide Dinitrate 20Mg + Hydralazine 37.5Mg 788 Dm788 Isvaconazole 100Mg 789 Dm789 Ivabradine 5Mg 790 Dm790 Ivermectin 12Mg 791 Dm791 Vildagliptin 50Mg + Metformin 1000Mg 792 Dm792 Metformin 500Mg +Vildagliptin 50 Mg 793 Dm793 Metformin 1000Mg +Sitagliptin 50Mg 794 Dm794 Metformin 500Mg +Sitagliptin 50Mg 795 Dm795 Sitagliptin 100Mg 796 Dm796 Siragliptin 50Mg 797 Dm797 Empagliflozin 10Mg 798 Dm798 Empagliflozin 25Mg 799 Dm799 Empagliflozin 12.5Mg +Metformin 500Mg 800 Dm800 Co-Enzyme Q 50Mg+L-Carnitine Tartarate 500Mg+Lycopene 10% 2500Mcg+L Glutamine 10Mg+Vitamin E 50% 200Mg + 801 Dm801 Lansoprazole Dispersible 15Mg802 Dm802 Camphor+Chlorothymol+Eucalyptol+ Menthol+Terpineol Soft Gelatin Capsules 803 Dm803 Phytomenadione 10Mg 804 Dm804 Labetalol 100Mg 805 Dm805 Lacosamide 50Mg 806 Dm806 Lamivudine 100Mg 807 Dm807 Chloroquine Phosphate 500Mg 808 Dm808 Frusemide 20Mg +Spironolactone 50Mg 809 Dm809 Furosemide 40Mg Tab 810 Dm810 Lenalidomide 10Mg 811 Dm811 Lenvatinib 10Mg 812 Dm812 Lenvatinib 4Mg 813 Dm813 Levosulpiride 25Mg 814 Dm814 Levetiracetam 250Mg 815 Dm815 Levetiracetam 500Mg 816 Dm816 Levocetrizine 5Mg 817 Dm817 Levofloxacin 750Mg 818 Dm818 Levofloxacin 500Mg 819 Dm819 Levonadifloxacin 500Mg 820 Dm820 Amitryptilline 12.5Mg +Chlordiazepoxide 5Mg 821 Dm821 Chlordiazepoxide 5Mg +Clidinium 2.5Mg 822 Dm822 Chlordiazepoxide 10Mg 823 Dm823 Chlordiazepoxide 25Mg 824 Dm824 Baclofen 10Mg 825 Dm825 Ferrous Fumarate + Folic Acid 826 Dm826 Linezolid 600Mg 827 Dm827 Diphenoxylate 2.5Mg +Atropine 0.025Mg 828 Dm828 Minoxidil 5Mg 829 Dm829 L-Ornitine L - Aspartate 500Mg 830 Dm830 Losartan Potassium 25Mg 831 Dm831 Losartan 50Mg + Hydrochlothiazide 12.5Mg 832 Dm832 Artemether 60Mg + Lumefantrine 360Mg 833 Dm833 Artemether 80Mg + Lumefantrine 480Mg 834 Dm834 Magnesium Orotate 500Mg 835 Dm835 Primaquine Phoshpate 15Mg 836 Dm836 Nitrofurantoin 100Mg 837 Dm837 Amitryptiline 10Mg +Pregablin 75Mg 838 Dm838 Methylcobalamine 1500Mcg +Vitamin B6 Pyridoxine 20Mg +Folic Acid 5Mg 839 Dm839 Mebendazole 100Mg 840 Dm840 Mebeverine Hydrochloride Modified Release 200Mg 841 Dm841 Methylcobalamine 1500Mcg+Alpha Lipoic Acid 100Mg +Folic Acid 1.5Mg +Pyridoxine Hydrocgloride 3Mg 842 Dm842 Methylprednisolone 4Mg 843 Dm843 Mefenemic Acid 250Mg +Dicyclomine 10Mg 844 Dm844 Omega 3 Acid Ethyl Esters Soft Gelatin 1000Mg 845 Dm845 Docosahexaenoic Acid 180Mg +Eicosapentaneoic Acid ( Epa ) 240Mg +Vitamin E 400Mg 846 Dm846 Megestrol Acetate 160Mg 847 Dm847 Melatonin 3Mg 848 Dm848 Methylcobalamin 1500Mcg +Pregabalain 75Mg 849 Dm849 Mesalazine 400Mg 850 Dm850 Mesalazine 800Mg 851 Dm851 Mesalazine 1200Mg Prolonged Release 852 Dm852 Methylcobal 500Mcg Tab 853 Dm853 Methylprednisolone 8Mg Tab 854 Dm854 Metoprolol 25Mg 855 Dm855 Metoprolol 50Mg 856 Dm856 Metoprolol Succinate Extended Release 25Mg857 Dm857 Metoprolol Succinate Extended Release 50Mg 858 Dm858 Metronidazole 400Mg 859 Dm859 Mirtazapine 7.5Mg 860 Dm860 Misoprostol 200Mcg 861 Dm861 Modafinil 100Mg 862 Dm862 Tadalafil 5Mg 863 Dm863 Cefpodoxime Proxetil 200Mg 864 Dm864 Montelukast 10Mg 865 Dm865 Montelukast 10Mg +Levocetrizine 5Mg 866 Dm866 Moxifloxacin 400Mg 867 Dm867 Moxonidine 0.2Mg 868 Dm868 Moxonidine 0.3Mg 869 Dm869 Acetylcysteine 600Mg 870 Dm870 Multivitamin And Multimineral Soft Gel Cap 871 Dm871 Mycophenolate Mofetil 360Mg 872 Dm872 Sofosbuvir 400Mg +Velpatasvir 100Mg 873 Dm873 Ademetionine 400Mg 874 Dm874 Paracetamol 500Mg +Chlorzoxazone 250Mg 875 Dm875 Diclofenac Sustained Release 100Mg 876 Dm876 Naltrexone 50Mg 877 Dm877 Naproxen 500Mg 878 Dm878 Naproxen 250Mg +Domperidone 10Mg 879 Dm879 Naproxen 500Mg +Domperidone 10Mg 880 Dm880 Nano Curcumin 300Mg 881 Dm881 Nebivolol Hydrochloride 2.5Mg 882 Dm882 Nebivolol Hydrochloride 5Mg 883 Dm883 Essential Vitamins Tablet 884 Dm884 Pregabalin 75Mg 885 Dm885 Vitamin B Complex With Vitamin B12 886 Dm886 Clonazepam 0.5Mg +Escitalopram Oxalate 5Mg 887 Dm887 Nifedipine Retard 10Mg 888 Dm888 Nifedipine Retard 20Mg 889 Dm889 Nicotine Transdermal Patch 7Mg ( Lp 18 ) 890 Dm890 Nicorandil 5Mg Tab 891 Dm891 Nitroglycerin 2.6Mg 892 Dm892 Nitazoxanide 500Mg 893 Dm893 Sodium Bicarbonate 500Ng 894 Dm894 Norfloxacin 400Mg + Lactobacillus 120Million Spores Tablet 895 Dm895 Norfloxacin 400Mg +Tinidazole 600Mg 896 Dm896 Chlordiazepoxide 5Mg +Clidinium 2.5Mg +Dicyclomine 10Mg +Rabeprazole 10Mg 897 Dm897 Chlordiazepoxide 5Mg +Clidinium 2.5Mg +Dicyclomine 10Mg 898 Dm898 Amoxycillin 500Mg 899 Dm899 Calcium Citrate 1000Mg +Vitamin D3 1000Iu 900 Dm900 Vitamin D3 60K 901 Dm901 Calcium Citrate Maleate 500Mg + Vit D 3 1000 Iu+Eicosapentaneoic Acid 90Mg +Docosahexaenoic Acid 60Mg +Vit B 12 1500Mcg 902 Dm902 Heme Iron Polypeptide 12Mg 903 Dm903 Omeprazole 20Mg 904 Dm904 Ofloxacin 200Mg 905 Dm905 Ofloxacin 400Mg Tablet 906 Dm906 Ofloxacin 200Mg +Tinidazole 600Mg 907 Dm907 Olanzapine 2.5Mg 908 Dm908 Olanzapine 10Mg 909 Dm909 Olmesartan Medoxomil 40Mgh 910 Dm910 Prednisolone 40Mg 911 Dm911 Ondansetron Mouth Dissolving 4Mg912 Dm912 Ofloxacin 200Mg +Ornidazole 500Mg 913 Dm913 Oseltamivir 75Mg Tab 914 Dm914 Alendronate Sodium 35Mg 915 Dm915 Dapagliflozin Propanediol Monohydrate 10 Mg 916 Dm916 Dapagliflozin Propanediol Monohydrate 5 Mg 917 Dm917 Trihexyphenidyl 2Mg 918 Dm918 Tacrolimus 0.25Mg 919 Dm919 Pantoprazole 40Mg 920 Dm920 Pantoprazole 80 Mg 921 Dm921 Itopride Hydrochloride Sr 150 Mg+Pantoprazole Sodium 40 Mg 922 Dm922 Levosulpiride Sr 75 Mg+Pantoprazole Sodium 40 Mg 923 Dm923 Domperidone 10Mg+Pantoprazole 20Mg 924 Dm924 Pantoprazole 40Mg+Domperidone Sr 30Mg 925 Dm925 Mesalazine ( Mesalamine / 5 Amino Salicylic Acid ) Pr 500 Mg 926 Dm926 Metoclopramide 10Mg 927 Dm927 Sevelamer Carbonate 800 Mg 928 Dm928 Calcium Acetate 929 Dm929 Pirfenidone 200 Mg 930 Dm930 Posaconazole 100Mg Tablet 931 Dm931 Cyproheptadine 4Mg 932 Dm932 Dabigatran Etexilate 150Mg 933 Dm933 Pramipexole Dihydrochloride 0.125Mg 934 Dm934 Pramipexole Dihydrochloride 1 Mg 935 Dm935 Prazosin Hydrochloride 1Mg 936 Dm936 Prazosin Hydrochloride 2Mg 937 Dm937 Prazosin Hydrochloride 2.5 Mg 938 Dm938 Prazosin Hydrochloride 5 Mg 939 Dm939 Mecobalamin ( Methylcobalamin ) 750Mcg+Pregabalin 75Mg 940 Dm940 Nortriptyline 10 Mg+Pregabalin 75 Mg 941 Dm941 Pregabalin 150Mg 942 Dm942 Tacrolimus 0.5 Mg 943 Dm943 Tacrolimus 1.0 Mg 944 Dm944 Lactobacillus Acidophilus 1 Million Cells 945 Dm945 Prucalopride 1Mg 946 Dm946 Prucalopride 2Mg 947 Dm947 Prulifloxacin 600Mg 948 Dm948 Cinacalcet 30Mg 949 Dm949 Ambrisentan 10Mg 950 Dm950 Ambrisentan 5Mg 951 Dm951 Lactobacillus Reuteri 100 Mg 952 Dm952 Amoxicillin 750 Mg+Clarithromycin 500 Mg+Esomeprazole 40 Mg 953 Dm953 Tinidazole 500Mg+Clarithromycin 250Mg+Lansoprazole 30Mg 954 Dm954 Pyrazinamide 500Mg 955 Dm955 Pyrazinamide 750Mg 956 Dm956 Quetiapine 25Mg Tablet 957 Dm957 Coenzyme Q10 100Mg+Levocarnitine 500 Mg+Lycopene 5000 Mcg+Mecobalamin ( Methylcobalamin ) 750 Mcg Tablet 958 Dm958 Ramipril 2.5Mg Tablet 959 Dm959 Ranolazine 500Mg Tablet 960 Dm960 Ranitidine ( 150Mg ) 961 Dm961 Rabeprazole ( 20Mg ) 962 Dm962 Domperidone ( 30Mg ) + Rabeprazole ( 20Mg ) 963 Dm963 Rifampicin 150 Mg964 Dm964 Rifampicin 450Mg 965 Dm965 Rifampicin 600Mg 966 Dm966 Isoniazid 300Mg + Rifampicin 450Mg 967 Dm967 Rifampicin 600Mg + Isoniazid 300Mg 968 Dm968 Gliclazide ( 60Mg ) 969 Dm969 Racecadotril ( 100Mg ) 970 Dm970 Eltrombopag ( 25Mg ) 971 Dm971 Eltrombopag ( 50Mg ) 972 Dm972 Ribavirin 200Mg 973 Dm973 Tenofovir Disoproxil Fumarate ( 300Mg ) 974 Dm974 Rifaximin 550Mg 975 Dm975 Rifaximin 200Mg 976 Dm976 Rifaximin 400Mg 977 Dm977 Riociguat 0.5Mg 978 Dm978 Risperidone 1Mg Tablet 979 Dm979 Rosuvastatin 5Mg 980 Dm980 Rosuvastatin 10Mg 981 Dm981 Rosuvastatin 20Mg 982 Dm982 Fenofibrate 160Mg+Rosuvastatin 10Mg 983 Dm983 Escitalopram 10Mg 984 Dm984 Cod Liver Oil 300 Mg 985 Dm985 Secnidazole 1000Mg 986 Dm986 Sulfamethoxazole 400Mg + Trimethoprim 80Mg 987 Dm987 Haloperidol ( 0.25Mg ) 988 Dm988 Sertraline 25Mg 989 Dm989 Sevelamer Carbonate 400Mg 990 Dm990 Calcium Carbonate 500 Mg+Calcitriol 0.25 Mcg 991 Dm991 Cholecalciferol ( Vit D3 ) +Elemental Boron+Elemental Calcium+Elemental Copper+Elemental Magnesium+Elemental Manganese+Elemental Zinc 992 Dm992 Cholecalciferol ( Vit D3 ) 250Iu+Elemental Calcium 500Mg 993 Dm993 Bromocriptine ( 2.5Mg ) 994 Dm994 Aceclofenac ( 100Mg ) + Paracetamol ( 325Mg ) + Serratiopeptidase ( 15Mg ) 995 Dm995 Sildenafil Citrate 25Mg 996 Dm996 Silodosin 8Mg 997 Dm997 Silodosin 8Mg + Dutasteride 0.5Mg 998 Dm998 Silodosin 4Mg + Dutasteride 0.5Mg 999 Dm999 Simvastatin 10Mg 1000 Dm1000 Simvastatin 20Mg 1001 Dm1001 Simvastatin 40Mg 1002 Dm1002 Paracetamol ( 500 Mg ) + Phenylephrine ( 10 Mg ) + Chlorpheniramine ( 2 Mg ) + Caffeine ( Anhydrous ) ( 30 Mg ) 1003 Dm1003 Sirolimus 1Mg 1004 Dm1004 Risperidone 0.5Mg 1005 Dm1005 Docusate 100 Mg + Calcium Dobesilate 1006 Dm1006 S-Amlodipine 2.5 Mg 1007 Dm1007 Sofosbuvir 400 Mg 1008 Dm1008 Isoniazid 100 Mg 1009 Dm1009 Isoniazid 300 Mg 1010 Dm1010 Esmoperazole 20 Mg 1011 Dm1011 Amoxycillin 750 Mg + Clarithromycin 500 Mg+ Esomeprazole 40 Mg 1012 Dm1012 Sorafenib 200 Mg 1013 Dm1013 Isosorbide Dinitrate 50M Tablet 1014 Dm1014 Prochlorperazine 50 Mg 1015 Dm1015 Atorvastatin 20 Mg1016 Dm1016 Citicoline 500 Mg 1017 Dm1017 Multivitamin With Minerals And Trace Elements 1018 Dm1018 Levodopa 100 Mg + Carbidopa 10 Mg 1019 Dm1019 Levodopa 110 Mg + Carbidopa 25 Mg 1020 Dm1020 Folic Acid 5 Mg 1021 Dm1021 Tamsulosin 0.4 Mg + Dutasteride 0.5 Mg 1022 Dm1022 Tamsulosin Hydrochloride Prolonged Release 0.4 Mg 1023 Dm1023 Tapentadol 50 Mg 1024 Dm1024 Cefixime 200 Mg 1025 Dm1025 Montelukast 10 Mg + Fexofenadine 120 Mg 1026 Dm1026 Telmisartan 40 Mg + Hydrochlorothiazide 12.5 Mg 1027 Dm1027 Telmisartan 20 Mg 1028 Dm1028 Telmisartan 40 Mg 1029 Dm1029 Telmisartan 40 Mg+ Amlodipine 50 Mg 1030 Dm1030 Temozolamide 20 Mg 1031 Dm1031 Temozolamide 100 Mg 1032 Dm1032 Teneligliptin 20 Mg 1033 Dm1033 Tenofovir Alafenamide 25 Mg 1034 Dm1034 Emtricitabine 200 Mg + Tenofovir Disoproxil Fumarate 300 Mg 1035 Dm1035 Terizidone 250 Mg 1036 Dm1036 Tetrabenazine 25Mg 1037 Dm1037 Thalidomide 50Mg 1038 Dm1038 Thalidomide 100Mg 1039 Dm1039 Glutathione 500 Mg 1040 Dm1040 Thyroxine Sodium 100 Mcg 1041 Dm1041 Thyroxine Sodium 12.5 Mcg 1042 Dm1042 Thyroxine Sodium 25 Mcg 1043 Dm1043 Thyroxine Sodium 50 Mcg 1044 Dm1044 Mecobalamine+Alpha Lipoic Acid+Benfothiamine+Pyridoxine Hcl+Biotin+Folic Acid+Chromium 1045 Dm1045 Tinidazole 500 Mg 1046 Dm1046 Tofacitinib 5 Mg 1047 Dm1047 Tolvaptan 15 Mg 1048 Dm1048 Linagliptin 5 Mg 1049 Dm1049 Metformin 500 Mg + Linagliptin 2.5 Mg 1050 Dm1050 Tramadol Hydrochloride 50 Mg 1051 Dm1051 Tranexamic Acid 500 Mg 1052 Dm1052 Pentoxyfyline 400 Mg 1053 Dm1053 Oxybutinine 2.5Mg Tab 1054 Dm1054 Amitriptyline 10Mg 1055 Dm1055 Amitriptyline 25Mg 1056 Dm1056 Tapentadol 100 Mg 1057 Dm1057 Ursodeoxycholic Acid 300 Mg 1058 Dm1058 Ursodeoxycholic Acid 600 Mg 1059 Dm1059 Paracetamol / Acetaminophen 162.5 Mg + Tramadol 18.75 Mg 1060 Dm1060 Paracetamol / Acetaminophen 325 Mg + Tramadol 37.5 Mg 1061 Dm1061 Rosuvastatin 20 Mg + Aspirin 75 Mg 1062 Dm1062 Cholecalciferol 60 K 1063 Dm1063 Tamsulosin Hydrochloride Modified Release 0.4Mg 1064 Dm1064 Flavoxate 200 Mg 1065 Dm1065 Ursodeoxycholic Acid 150 Mg 1066 Dm1066 Ursodeoxycholic Acid 450 Mg 1067 Dm1067 Valganciclovir 450 Mg 1068 Dm1068 Valacyclovir 1000 Mg1069 Dm1069 Sodium Valproate 500 Mg 1070 Dm1070 Vancomycin 250 Mg 1071 Dm1071 Domperidone 30 Mg + Rabeprazole 20 Mg 1072 Dm1072 Levosulpiride 75 Mg + Rabeprazole 20 Mg 1073 Dm1073 Desvenlafaxine 25 Mg 1074 Dm1074 Betahistine 16 Mg 1075 Dm1075 Betahistine 8 Mg 1076 Dm1076 Darifenacin 7.5 Mg 1077 Dm1077 Multivitamin With Zinc And Curcuma Longa Extract 1078 Dm1078 Metadoxine 500 Mg 1079 Dm1079 Famciclovir 250 Mg 1080 Dm1080 Famciclovir 500 Mg 1081 Dm1081 Vitamin C 500 Mg 1082 Dm1082 Vitamin D 3+Methycobalamin+Alpha Lipoic Acid+Folic Acid 1083 Dm1083 Alpha Lipoic Acid 100 Mg, Benfotiamine 50 Mg, Biotin 5 Mg, Chromium Picolinate 100 Mcg, Folic Acid 1500Mcg, Methylcobalamin 1500 Mcg, And Pyridoxine 5 Mg 1084 Dm1084 Coenzyme Q10 100Mg+ Chromium Picolinate 65Mcg+ Eicosapentaenoic Acid 90Mg + Docosahexaenoic Acid 60Mg+L-Arginine 100Mg+ Excepients Q.S , Soft Gelatin Capsule 1085 Dm1085 Lactobacillus 120Million Spores Capsule 1086 Dm1086 Voriconazole 200 Mg 1087 Dm1087 Live Freeze Dried Lactic Acid Bacteria And Bifidobacteria 112.5Billion Cfu Capsule 1088 Dm1088 Sacubitril 24 Mg + Valsartan 26 Mg 1089 Dm1089 Warfarin 1 Mg 1090 Dm1090 Warfarin 2 Mg 1091 Dm1091 Prednisolone 10 Mg 1092 Dm1092 Prednisolone 20 Mg 1093 Dm1093 Prednisolone 5 Mg 1094 Dm1094 Rivaroxaban 10 Mg 1095 Dm1095 Clonazepam 0.5 Mg 1096 Dm1096 Carbamazepine 200 Mg 1097 Dm1097 Albendazole 400 Mg 1098 Dm1098 Zinc Acetate 50 Mg 1099 Dm1099 Vitamins A, B Complex, C, D, And E Along With Minerals Such As Magnesium, Manganese, Iodine, Copper, Selenium, Chromium, Zinc, And Grape Seed Extracts. 1100 Dm1100 Fluconazole 50 Mg 1101 Dm1101 Zolpidem 10 Mg 1102 Dm1102 Zolpidem 5 Mg 1103 Dm1103 Clotrimazole 1104 Dm1104 Hydroxychloroquine 200 Mg 1105 Dm1105 Colchicine 0.5Mg 1106 Dm1106 Allopurinol 100 Mg 1107 Dm1107 Metolazone 2.5 Mg 1108 Dm1108 Metolazone 5 Mg 1109 Dm1109 Gadodiamide 0.5Mmol / Ml, 10Ml 1110 Dm1110 Iohexol 350Mg / 100Ml 1111 Dm1111 Iohexol 350Mg / 50Ml 1112 Dm1112 Iomeprol 81.65G Corresponding To 40G Of Iodine At The Concentration Of 400Mg Iodine / Ml. Inactive Components:Trometamol 100Mg+Hcl 24Mg+Water For Inj Q.S.A 100Ml1113 Dm1113 Contains 1Ml : Gadobenic Acid 334Mg ( 0.5M ) As Dimeglumine Salt ( Gadobenate Dimeglumine 529Mg=Gadobenic Acid 334Mg+Meglumine 195Mg ) , Water For Inj, 20Ml 1114 Dm1114 Iodixanol 320Mg / Ml, 100Ml 1115 Dm1115 Iodixanol 320Mg / Ml, 50Ml 1116 Dm1116 Ethiodized Oil 1117 Dm1117 Diatrizoate Sodium 30Ml 1118 Dm1118 Sulphur Hexa Fluoride 45Mcg / Ml 1119 Dm1119 Diatrizoic Acid 76% 20Ml 1120 Dm1120 Ethyl Alcohol 70% W / V, Chlorhexidine Gluconate 2.5%W / V / 500Ml 1121 Dm1121 Ethyl Alcohol 70% W / V, Chlorhexidine Gluconate 2.5%W / V / 100Ml 1122 Dm1122 Basiliximab 20Mg 1123 Dm1123 Daunomycin 20Mg 1124 Dm1124 L Asparginase 10000 1125 Dm1125 Pegylated L Aspraginase 1126 Dm1126 Non Albumen Bound Paclitaxel Cremohor Free : Genexo L Pm 1127 Dm1127 Carfilzomib 60Mg 1128 Dm1128 Darzalex : Daratumumub 100Mg 1129 Dm1129 Darzalex : Daratumumub 400Mg 1130 Dm1130 Obnituzumab : Gazya 1131 Dm1131 Trastuzumab : 375 Mg Strength 1132 Dm1132 Rasby : Rasburicase 1133 Dm1133 Perjeta : Pertuzumab 1134 Dm1134 Pemetrexed 100 1135 Dm1135 Pemetrexed 500 1136 Dm1136 Cabazitaxel 60 1137 Dm1137 Fludarabine 50 1138 Dm1138 Bendamsutine 100Mg 1139 Dm1139 Bendamsutine 180Mg 1140 Dm1140 Bendamsutine 45Mg 1141 Dm1141 Methotraxate : 500 Mg 1142 Dm1142 Methotraxate 1 Gm 1143 Dm1143 Ifofsamide : Holoxan 1144 Dm1144 Pleraxifor 1145 Dm1145 Topotecan 2.5Mg 1146 Dm1146 Ivig 10% Generic 1147 Dm1147 Duragesic Patches 1148 Dm1148 Waterless Body Bath: Deionised Water, Coamidopropyl Betaine, Capryl Glucoside, Sodium Hydroxide, Propylene Glycol, Sodium Benzoate, Dehydroacetic Acid, Citric Acid, Chlorhexidine Gluconate 1149 Dm1149 Meropenem 1.5 Gm With Sulbactum With Edta 1150 Dm1150 L-Ornithine L-Aspartate With Silymarin Sachet 1151 Dm1151 Vitamin E ( 400 ) + Omega 3 Fatty Acids+ Co-Enzyme Q10+ Nanocurcumin+ Piperine Tablets 1152 Dm1152 Reteplase 1153 Dm1153 Cefepime 1Mg And Tazobactum 1Mg 1154 Dm1154 Glutathione 2Gm 1155 Dm1155 Meropenam 1Gm And Sulbactum 1Gm 1156 Dm1156 Flucloxacilline 2Gm 1157 Dm1157 Glutathion 600Mg And 1000 Vitamin C 1158 Dm1158 Polymixin B With Renal Guard Technology 1159 Dm1159 Iron Carboxymaltose 100Mg Inj 1160 Dm1160 Magenessium Oxide 400Mg Tab 1161 Dm1161 Azelnidipine 8Mg Tab1209 Dm1209 Branched Chain Amino Acids, L-Leucine-2760Mg, L-Isoleucine-1920Mg, L-Valine-1656Mg 1210 Dm1210 Cefepime 1Gm And Tazobactum 1Gm 1211 Dm1211 Cefepime Igm + Sulbactum 1Gm Inj 1212 Dm1212 Ceftizoxime 2Gm 1213 Dm1213 Ceftizoxime 3Gm 1214 Dm1214 Dorpenem 500Mg & Salbactum 500Mg 1215 Dm1215 Meropenem 1Gm & Salbactum 500Mg With Edta 1216 Dm1216 Merozyme 2Gm 1217 Dm1217 Polymixin 5 Lac With Edta 1218 Dm1218 Serocit 46.7% ( Sodium Citrate 46.7% ) 1219 Dm1219 Amphotericin B 50Mg ( Lyophilized ) 1220 Dm1220 Each 15Ml Emulsion Contains N-Acetylcysteine 600Mg & Simethicone 150Mg 1221 Dm1221 Liposamal Amphotericin B Suspension In Saline 50Mg 1222 Dm1222 Liposamal Amphotericin B Suspension In Saline 10Mg 1223 Dm1223 Liposamal Amphotericin B Gel 0.1% W / W For Tropical Application 1224 Dm1224 Liposamal Dithranol Gel 0.5% W / W For Tropical Application 1225 Dm1225 Liposamal Diclofenac Gel For Tropical Application 1226 Dm1226 Coal Tar & Salicylic Phospholipid Structured Gel 2% W / W For Tropical Application 1227 Dm1227 Carica Papaya Ext. Tinospora Cordifolia 1228 Dm1228 Nano Curcumin Piperine Lycopene 1229 Dm1229 Tab Metronidazole Extended Release 600Mg 1230 Dm1230 Tab Ofloxacin 200Mg Metronidazole 500Mg 1231 Dm1231 4 Factor Pcc ( Prothrombin Complex Concentrate ) 500Iu 1232 Dm1232 Novoseven 1Mg ( Factor Vii ) 1233 Dm1233 Novoseven 2Mg ( Factor Vii ) 1234 Dm1234 Blood Glucos Test Strips ( Glucometer To Be Provided As Foc ) 1235 Dm1235 Chlorhexedine Gluconate 4% Solution 500Ml 1236 Dm1236 Chlorhexidine Gluconate + Cetrimide Solution 1000Ml 1237 Dm1237 Chlorinated Lime & Boric Acid In Aqueous Base ( Eusol ) 400Ml 1238 Dm1238 Cidex Opa Test Strip 1239 Dm1239 Cidex Opa, Asp-5Ltr ( Ortho-Phthalaldehyde0.55% ) 1240 Dm1240 Compund Benzoine Tincture 400 Ml 1241 Dm1241 Alkyl Di Methyl Benzyl Ammonium Chloride- 2.37%, Alkyl Di Methyl Ethyl Benzyl Ammonium Chloride -2.37%, Inert Ingredients -95.26% ) 1242 Dm1242 Desflurane 1243 Dm1243 Distilled Water-5Ltr 1244 Dm1244 Formalin Solution 34% To 38% 400Gm 1245 Dm1245 Hydrogen Peroxide 6.5% 400Ml 1246 Dm1246 Isoflurane 250 Ml 1247 Dm1247 Isoflurane Inhalant Solution 30 Ml 1248 Dm1248 Medical Enzyme Detergent 1Ltr ( Multi Enzyme Cleaner For Surgical, Medical Instruments Cleaning Flexible & Rigid Endoscopes ) 1249 Dm1249 Povidone Iodine Solution10% 1250 Dm1250 Providone Iodine Cleaning Solution 7.5%- Surgical Scrub 500 Ml 1251 Dm1251 Provodine Iodine Cleaning Solution 5%W / V 500Ml1252 Dm1252 Sevoflurane Inhalant 250 Ml 1253 Dm1253 Sevoflurane Inhalant 50 Ml 1254 Dm1254 Soda Lime- 5 Kg 1255 Dm1255 Sterliq Solution 1256 Dm1256 Ultrasound Jelly ( Kiran Sonogel ) 250Ml 1257 Dm1257 Ultrasound Jelly 250Ml 1258 Dm1258 Sugammadex Injection 100Mg 1259 Dm1259 Akynzio ( Netupitant + Palanosetron ) 1260 Dm1260 Azacitadine 1261 Dm1261 Denosumab 120Mg 1262 Dm1262 Eribulin Myselate 1263 Dm1263 Pembrolizumab 100Mg 1264 Dm1264 Durvalumab 500Mg 1265 Dm1265 Durvalumab 120Mg 1266 Dm1266 Posaconazole 300Mg Injection 1267 Dm1267 Humi Insulin 40Iu ( Monocomponent Biosynthetic R-Dna Insulin 40Iu 1268 Dm1268 Influenza Vaccine Adult 1269 Dm1269 Meropenem 1Gm+Tazobactum 125 Mg Injections 1270 Dm1270 Tobramycin Respules 1271 Dm1271 Disodium Guanosine 5 Monophosphate-5Mg + Elemental Iron-30Mg + Lactoferrin-50Mg 1272 Dm1272 Essential Branch Chain Amino Acids With Curcumin 1273 Dm1273 Abiraterone 250Mg 1274 Dm1274 Abiraterone 500Mg 1275 Dm1275 Alphaketoanalogue Dubble Strenth 1276 Dm1276 Calcium Citrate Malate 1000 Mg + Vitamin D-3 800 Iu + Magnesium Hydroxide 250 Mg 1277 Dm1277 Calcium Citrate Malate 500 Mg Vitamin D-3 1000 Iu, Eicosapentaenoic Acid 90 Mg, Docosahexaenoic Acid 60 Mg Vitamin B12 1500 Mcg 1278 Dm1278 Carbozantinib 20Mg Tab 1279 Dm1279 Carbozantinib 40Mg Tab 1280 Dm1280 Carbozantinib 60Mg Tab 1281 Dm1281 Co Enzyme Q10 100 Mg+L-Arginine 100Mg + Eicosapentaenoic Acid90 Mg + Docosahexaenoic Acid 60 Mg Soft Gel +Chromium Picolinate 65 Mcg 1282 Dm1282 Dabigatran Etexilate Mesylate 150Mg 1283 Dm1283 Erlotinib 150Mg 1284 Dm1284 Everolimus 0.5Mg 1285 Dm1285 Lapatinib 250Mg 1286 Dm1286 Orciprenaline 10Mg 1287 Dm1287 Posaconazole 100Mg 1288 Dm1288 Pre-Pro Biotic 90 Billion Cfu 1289 Dm1289 Probiotic 21 Billion Cfu With 100Mg Inulin 1290 Dm1290 Sildenafi 20Mg 1291 Dm1291 Sodium Bicarbonate Enteric Coated 1000Mg 1292 Dm1292 Sodium Bicarbonate Enteric Coated 500Mg 1293 Dm1293 Sucroferric Oxyhydroxide ( 2500Mg ) 1294 Dm1294 Thiamine Hydrochloride Ip 250Mg+Riboflovin 4Mg+Pyridoxine Hydrochloride Ip 50Mg 1295 Dm1295 Ruxolitinib 20Mg 1296 Dm1296 Humi Insulin Biphasic 40Iu 30% Soluble Insulin & 70% Isophane Insulin ) Metacresol U.S.P 1.5Mg Pheno Ip - 0.65Mg 1297 Dm1297 100 % Whey Protein ( 65% ) Curcumin Essential Multivitamins1298 Dm1298 Albumen Powder, Probiotic ( Lactobacillus Rhamnosus ) Lactose Free, Gluten Free, Sugar Free, Cholestrol Freeprotein 65Gmcalories Aprox 298 Kcal 1299 Dm1299 Whey Protein Concentrate, Whey Protein Hydrolysates Lactose Free, Gluten Free, Sugar Free, Cholestrol Free, Trans Fat Free Protein 40Gm Calories Aprox 480 Kcal 1300 Dm1300 Alpha Ketoanalogue - Ds 1301 Dm1301 Thiamine Mononitrate, Pyridoxin, Folic Acid, Zinc, Sele 1302 Dm1302 Desidustat 50Mg Tablet 1303 Dm1303 Calcium Polystyrene Sulphonate Suspension 15Gm 1304 Dm1304 Desidustat 100Mg Tablet 1305 Dm1305 Omega 3 Fatty Acids, Eicosapentaenoic Acid ( Epa ) ( 90.0 Mg ) , Docosahexaenoic Acid ( Dha ) ( 60.0 Mg ) , Coenzyme Q10 / Ubidecarenone ( 100.0 Mg ) , Lycopene 10% ( 5000.0 Mcg ) , Mixed Carotene ( 10.33 Mg ) , Wheat Germ Oil [ Vit E ] ( 25.0 Mg ) , Calcium Ascorbate ( 75.0 Mg ) , Piperine ( 5.0 Mg ) , Vitamin B12 Mecobalamin / Cynocobalamin / Methylcobalamin ( 5.0 Mcg ) , Zinc Sulphate Monohydrate ( 27.45 Mg ) , Selenium Dioxide 1306 Dm1306 Cinitapride ( 3Mg ) + Pantoprazole ( 40Mg ) 1307 Dm1307 Vitamin D3 1308 Dm1308 Vitamins K-2-7, D3, And Calcium. 1309 Dm1309 Nano Curcumin 200 Mg + Vitamin E 10 Mg+ Omega 3 Fatty Acid 250 Mg +Co Enzyme Q10 100 Mg+ Piperine 5 Mg 1310 Dm1310 L-Carnitine 1000 Mg + Branched Chain Amino Acids [ L-Leucine 2760 Mg + L-Isoleucine 1920 + L-Valine 1656 Mg ] 1311 Dm1311 L-Ornithine L -Aspartate 3 G + Silymarine 25 Mg 1312 Dm1312 L-Ornithine L -Aspartate 3 G + Silymarine 1000 Mg 1313 Dm1313 Thiamine 300 Mg +Pyridoxine 70 Mg + Methylcobalamin 750 Mcg +Magnesium Oxide 50 Mg + Copper Sulphate 20 Mg + Folic Acid 1.5 Mg + Zinc Sulphate 50 Mg + Selenium Oxide 200 Mcg 1314 Dm1314 Atorvastatin 10 Mg + Fenofibrate 160 Mg 1315 Dm1315 L-Glutamine 10 Gm+ Zinc Sulphate 3 Mg + Selenium 7 Mcg 1316 Dm1316 Glutathione 500 Mg + L-Cysteine 200 Mg + Vitamin C 40 Mg + Fructooligosaccaharides 50 Mg + 2.5 Billion Cfu Probiotics [ Lactobacillus / Saccharomyces / Bifidobacteroum / Bacilllus Subtilis ] 1317 Dm1317 Cholecalciferol 60 K Iu Nano Shots 1318 Dm1318 Bifidoba Lactobaccilus Sporogenes ( 45 Billion Cfu ) +Cterium Longum ( 45 Billion Cfu ) + Streptococcus Thermophilus ( 45 Billion Cfu ) +Lactobaccilus Acidophilus ( 45 Billion Cfu ) + Saccharomyces Boulardi ( 7.5 Billion Cfu ) + Fructooligosaccharides 100 Mg 1319 Dm1319 Baclofen ( 20Mg ) 1320 Dm1320 Pregabalin 75-Amytritiline 10 Mg 1321 Dm1321 Naltrexone 50 Mg 1322 Dm1322 Escitalopram 5 Mg 1323 Dm1323 Lorazepam 2 Mg 1324 Dm1324 Haloperidol Ampule1325 Dm1325 Whey Protein Concentration, Whey Protein Hydrolysates 40Gm, Carbohydrates 43.66Gm ( Sugar 0Gm ) , Dietary Fibre 3Gm, Fructooligosaccharide 3Gm, Fat 16.44Gm, Mct 1.64Gm, Trans Fat / Cholesterol 0Gm, Probiotic ( Lactobacillus Acidophilus ) 5Billion, Leucine 6.51Mg, Isoleucine 2.2Mg, Valine 17.22Mg, 30Viltamins&Minerals, Caloric Content 482Kcal, 1326 Dm1326 Albumen Protein 65.60Gm, Carbohydrates 8Gm ( Sugar 0Gm ) , Fat 0.40Gm, Trans Fat / Cholesterol 0Gm, Probiotic ( Lactobacillus Rhamnosus Lgg ) 5Billion, Leucine 6820Mg, Isoleucine 4336Mg, Valine 5577Mg, 26Viltamins&Minerals, Caloric Content 298Kcal, 1327 Dm1327 Nutrition Formula For Liver / Hepatic Disorders, Per 100 Gm-Calorie Density = 1.25 – 1.75 Kcal / Ml, Cho = > 50% Of Total Calorie, Protein: 23-25 Gm, Fat: 15 - 30% Of Total Calorie, Sodium-140-150 Mg, Branched Chain Amino Acid Enriched: At Least 22% Of Total Protein, Whether Gluten Free Or Not Must Be Mentioned, Suitable For Tube Feeding As Well As Oral Administration, Powder Format, Tin Size: 400G Packing, Attach Nabl Report For All Key Nutrients 1328 Dm1328 Nutritional Formula To Meet Nutritional Needs Of Patients With Type1& Type2 Diabetes Per 100 Gm-Total Calorie - 420 – 430 Kcal / Ml, Carbohydrate- 45-50% Of Total Calorie, Protein -20-25% Of Total Calorie, Fat- 30-35% Of Total Calorie, Mufa 3-5 Gm, Dietary Fibre- Equal Or More Than 6G / 100Gm, Suitable For Tube As Well As Oralpowder Format, Tin Size 400Gm, Attach Nabl Report For All Key Nutrients 1329 Dm1329 Peptide Based Semi Elemental Formula Calorie Delivery:460-470 Kcal, Per 100 Gm-Protein Content:18-20 Gm, Flexible Calorie Density Feed Preparations, Mct Enriched ( >68% Of Total Fat ) , Carbohydrate = 45-55% Of Total Calorie, 100% Whey Peptide-Based Formula ( Small Peptide ) , Clinically Lactose Free, Gluten Free, Sugar Content – 10-15 Gm 100Gm, Suitable For Tube Feeding As Well As Oral Administration, Low Osmolality ( <400M0s ) , Packaging Size: 400Gm, Attach Proof For Small Peptides, 1330 Dm1330 Fiber Formulations Plant Based Fibre -Partially Hydrolysed Gaur Gum, Sachet Format, Should Contain, Selenium , Zinc , Vit A, D, C And Meet 30% Rda 1331 Dm1331 High Protein, High Calorie, Low Electrolyte Formula For Dialysis Patients Per 100 Gm-Energy: 430 – 440 Kcal, Protein : 26-28 Gm ( Whey+ Casein ) , Energy From Carbohydrate:40%-45%Kcal, Energy From Fat-30%-35% Kcal, Fibre-5 Gm, Sodium – 140- 150 Mg Potassium – 340- 350 Mg, Phosphorous – 230-235 Mg, Calorie Density:1.5-1.7K Cal / Ml, Tin Size – 400 Gm, Powder Format, Attach Nabl Report For All Key Nutrients 1332 Dm1332 Complete Balanced Formula Energy Delivery: 420-430 Kcal, Carbohydrate ( Cho ) -50-60% Of Total Caloriesprotein-15-20% Of Total Calorie, Fat-25-35%Of Total Calorie, Fibre:6Gm / 100Gm, Suitable For Tube Feeding As Well As Oral Administration, Powder Format, Tin Size:400 Gm, Attach Nabl Report For All Key Nutrients 1333 Dm1333 High Protein Formula Energy Delivery:340-350 Kcal, Per 100 Gm-Protein 75-80% Whey Protein 20-25% Casein Combination, Providing 42 Gm Protein / 100 Gm, Fiber:5 Gm, Suitable For Tube Feeding As Well As Oral Administration, 400 Gm Packing, Powder Format, Attach Nabl Report For All Key Nutrients 1334 Dm1334 100% Whey Isolate Formulation ( Indias First Whey Isolate Formulation ) , Low Fat.- .50G / 100G, High In Bcaa, Sucrose Free, 400 Gm 1335 Dm1335 Modified Carbohydrate With Adequate Protein, Low Glycemic Index ( 36 ) & Low Glycemic Load ( 7 ) , High In Dietary Fiber And High In Mufa ( 9Gm &15.2Gm ) , 400 Gm 1336 Dm1336 India 1St Symbiotic ( Pre & Probiotic Both ) Balance Meal Replacement Feed For *Gut Dysbiosis* , Complete Calories & Protein ( 22Gm / 100Gm ) Requirement As A Balence Meal, Comes With Lycopene ( Oxidative Stress ) , 400 Gm 1337 Dm1337 Sodium Alginate 205Mg + Sodium Biocarbonate ( 133.5Mg ) + Calcium Carbonate ( 80Mg ) 1338 Dm1338 Elemental Calcium 50 + Vit D3 400Iu + Vit K27 ( 25Mcg ) 1339 Dm1339 Sucralfate 500Mg + Oxetacaine 10Mg / 5Ml, Sugar Free 50Ml Syrup 1340 Dm1340 Daptomycin 500Mg Inj 1341 Dm1341 Chromium Chloride ( 4Mcg ) + Copper Sulphate ( 0.40Mg ) + Manganese Sulphate ( 0.1Mg ) + Selenium ( 20Mcg ) + Zinc Sulfate ( 1Mg ) 1342 Dm1342 Sodium Bicarbonate ( 8.4% W / V ) 100Ml 1343 Dm1343 Trimethoprim 240Mg + Sulphamethoxazole 1200Mg 1344 Dm1344 Tab. Metformin Sr ( 1000Mg ) 1345 Dm1345 Pneumococcal Polysaccharide Vaccine 25Mcg 1346 Dm1346 Herpes Zoster Vaccine ( Recombinant, Adjuvanted ) ( 50Mcg ) 1347 Dm1347 Amino Acids ( Na ) 1348 Medcon001 0.012, 0.014 & 0.016” Guidewire With Outstanding Torque Control, Extremely Flexible Excellent Visibility Available In Tip Angle Of 45, 90 And Double Angle 90+150 1349 Medcon002 0.018 Weighted Tip Cto Guide Wire With Hydrophilic And Hydrophobic Coating ( Us Fda Approved ) 1350 Medcon003 10 Lead Ecg Cable For Mac 2000 Ecg M / C 1351 Medcon004 10 Lead Ecg Cable For Niscomed Ecg M / C 1352 Medcon005 15.5 Fr. Indwelling Pleural & Peritoneal Silicone Catheter, Comes With Polyester Cuff, Safety Valve Barium Stripe Fenestrations, ( Along With Drainage Line & Kit ) 1353 Medcon006 19Cm Insertion Length, 36 Cm 14.5 Fr Two Lumen Tunneled Cuffed Catheter For Dialysis 1354 Medcon007 2.7 F Microcatheter With Microglide Wire ( 0.18 ) Set 1355 Medcon008 5 Lead Ecg Cable For Monet 512 ( Rm ) 1356 Medcon009 A.V Fistula Needle 16G X 300 Mm 1357 Medcon010 A.V. Fistula Needle 17 G X 300Mm 1358 Medcon011 Abdominal Binder- Extra Large ( Flexible Metal Splint Prevents Edge Roll Over During Usage And Breathable 10 Inch Elastic Construction With Veloraclosure After Good Compression Support ) 1359 Medcon012 Abdominal Binder- Large ( Flexible Metal Splint Prevents Edge Roll Over During Usage And Breathable 10 Inch Elastic Construction With Veloraclosure After Good Compression Support ) 1360 Medcon013 Abdominal Binder- Medium ( Flexible Metal Splint Prevents Edge Roll Over During Usage And Breathable 10 Inch Elastic Construction With Veloraclosure After Good Compression Support ) 1361 Medcon014 Abdominal Binder- Small ( Flexible Metal Splint Prevents Edge Roll Over During Usage And Breathable 10 Inch Elastic Construction With Veloraclosure After Good Compression Support ) 1362 Medcon015 Abdominal Drain ( Pvc ) Set With Drainage Bags And Connector. Size 24 1363 Medcon016 Abdominal Drain ( Pvc ) Set With Drainage Bags And Connector. Size 28 1364 Medcon017 Abdominal Drain ( Pvc ) Set With Drainage Bags And Connector. Size 32 1365 Medcon018 Abdominal Sponge With Radio Opaque 50X30x12 Ply 1366 Medcon019 Absorbant Cotton Roll 500Gm 1367 Medcon020 Accustick Ii Introducer ( 4F Coaxial Dilator / 6F Sheath With Ro ) With Locking Stiffening Cannula And Diag Needle With Stylet 21G + 0.038 J -Tip And 0.018 Nitinol Wire 1368 Medcon021 Acquire Us Flexible Fnb Needle 19 G / 1.14Mm ( Ref-M00555580 ) 1369 Medcon022 Adaptor For Etco2 Sensor Mainstream Of Mp 60 Philips 1370 Medcon023 Adaptor For Etco2 Sensor Mainstream Of Mx 750 Philips 1371 Medcon024 Adaptor For Etco2 Sensor Mainstream Of Bpl Monitor 1372 Medcon025 Adaptor For Etco2 Sensor Mainstream Of Dash 5000 Ge 1373 Medcon026 Adaptor For Etco2 Sensor Mainstream Of Teama Ventilator Extend Masimo 1374 Medcon027 Adjustable Balloon System 1375 Medcon028 Adult Cannula For Airvo2 1376 Medcon029 Adult Cannula For Airvo2 - All Sizes ( Compatible With Fisher & Paykel Machine ) 1377 Medcon030 Allevyn Sacrum Adhesive 17X17cm ( Bedsore Dressing ) 1378 Medcon031 Alliance Gun Device 1379 Medcon032 Ambu Mask, Size-01 ( Silicon Reusable ) 1380 Medcon033 Ambu Mask, Size-02 ( Silicon Reusable ) 1381 Medcon034 Ambu Mask, Size-03 ( Silicon Reusable ) 1382 Medcon035 Ambu Mask, Size-04 ( Silicon Reusable ) 1383 Medcon036 Ambu Mask, Size-05 ( Silicon Reusable ) 1384 Medcon037 Ambu Bag Adult 1385 Medcon038 Ambu Bag Paedeatric 1386 Medcon039 Ammonia Filter ( Disp Hemoprfsn Cartr Renal ) Ha330ii 1387 Medcon040 Amplatz Renal Dilator Set ( 075000 ) , 6 - 30Fr. 1388 Medcon041 Amplatz Renal Dilator Set 6 -30Fr 1389 Medcon042 Amplatz Sheath 20Fr16cm 1390 Medcon043 Amplatz Sheath 24Fr20cm 1391 Medcon044 Amplatz Sheath 28Fr16cm 1392 Medcon045 Amplatz Superstiff 35 X 260 1393 Medcon046 Amplatz Ultrastiff Guidewire 0.35 150Cm / 145Cm 1394 Medcon047 Amplatz Ultrastiff Guidewire 0.35260Cm 1395 Medcon048 Amplatzer Vascular Plug With A Sturdy And Smooth Delivery System 22Mm1396 Medcon049 Amplatzer Vascular Plug With A Sturdy And Smooth Delivery System ( Avp ) 8Mmx13.5Mm 1397 Medcon050 Amplatzer Vascular Plug With A Sturdy And Smooth Delivery System 14Mm 1398 Medcon051 Amplatzer Vascular Plug With A Sturdy And Smooth Delivery System 16Mm 1399 Medcon052 Amplatzer Vascular Plug With A Sturdy And Smooth Delivery System 18Mm 1400 Medcon053 Amplatzer Vascular Plug With A Sturdy And Smooth Delivery System 20Mm 1401 Medcon054 Anes Face Mask No. 1 ( Cushioned ) 1402 Medcon055 Anes Face Mask No. 2 ( Cushioned ) 1403 Medcon056 Anes Face Mask No. 3 ( Cushioned ) 1404 Medcon057 Anes Face Mask No. 4 ( Cushioned ) 1405 Medcon058 Anes Face Mask No. 5 ( Cushioned ) 1406 Medcon059 Angiojet Aspiration Kit 6 Fr Arterial & * Fr Venous Designed For Thrombolysis And Aspiration 1407 Medcon060 Angioplasty Balloon 10 X 40Mm, High Pressure, Non Compliant 1408 Medcon061 Angioplasty Balloon 12 X 40Mm, High Pressure, Non Compliant 1409 Medcon062 Angioplasty Balloon 14X40mm, High Pressure 1410 Medcon063 Angioplasty Balloon 20 X 2.0 Cm 1411 Medcon064 Angioplasty Balloon 20Mmx4cm, High Pressure, Non Compliant 1412 Medcon065 Angioplasty Balloon 22Mm X 2Cm, High Pressure, Non Compliant 1413 Medcon066 Angioplasty Balloon 4X40mm, High Pressure, Non Compliant 1414 Medcon067 Angioplasty Balloon 6X40mm , High Pressure, Non Compliant 1415 Medcon068 Angioplasty Balloon 6X60, High Pressure, Non Compliant 1416 Medcon069 Angioplasty Balloon 7X40, High Pressure, Non Compliant 1417 Medcon070 Angioplasty Balloon 8Mmx40cm , High Pressure, Non Compliant 1418 Medcon071 Angioplasty Balloon Cath.4Mmx20mm ( 018 Compatible ) High Pressure, Non Compliant 1419 Medcon072 Angioplasty Balloon Cath.5Mmx20mm ( 018 Compatible ) High Pressure, Non Compliant 1420 Medcon073 Angioplasty Balloon High Pressure, Non Compliant ( All Sizes ) 1421 Medcon074 Angioplasty Balloon14x40, High Pressure, Non Compliant 1422 Medcon075 Anti-Bacterial Filter 1423 Medcon076 Anti-Embolism Stocking, Knee Length - Extra Large 1424 Medcon077 Anti-Embolism Stocking, Knee Length - Large 1425 Medcon078 Anti-Embolism Stocking, Knee Length - Medium 1426 Medcon079 Anti-Embolism Stocking, Knee Length - Small1427 Medcon080 Anti-Embolism Stocking, Knee Length - Xxl 1428 Medcon081 Antimicrobial And Antithrombogenic Picc Line With Both Internal And External Catheter Surfaces Protected With Chlorhexidine And Having Pressure Injectable Radiopaque Polyurethane With Blue Flextip And Taper Free Catheter Design With No Latex And Must Be Available 4.5 Fr & 5.5 Fr In Single And Double Lumen 55Cm 1429 Medcon082 Aortic Punch 3.5 1430 Medcon083 Aortic Punch 4.5 1431 Medcon084 Apc Probe 2.3Mm L 2.2Mm ( End Firing ) ( Compatible With Erbe Machine ) 1432 Medcon085 Apc Probe 3.2Mm L 2.2Mm ( End Firing ) ( Compatible With Erbe Machine ) 1433 Medcon086 Apc Probe Entroscopy 1.5Mm L 3Mm ( Compatible With Erbe Machine ) 1434 Medcon087 Apron Plastic-Disposible 1435 Medcon088 Aquire Eus Fna Needle 22G 1436 Medcon089 Arterial Cannula 20 G 1437 Medcon090 Arterial Kit Double ( Pressure Monitoring Kit ( Double ) Contents 1. Truwave Disposable Pressure Transducer .2. Bifurcated Iv Set 3. Flush Device 3 Ml / Hr4.48 ( 120 Cm ) Pressure Tubing With M / F Connector 4. 12 ( 30 Cm ) Pressure Tubing M / F Connector 5.3 Way Stopcock 6. Male Non Vented Cap ) 1438 Medcon091 Arterial Kit Single ( Pressure Monitoring Kit ( Double ) Contents 1. Truwave Disposable Pressure Transducer .2. Bifurcated Iv Set 3. Flush Device 3 Ml / Hr4.48 ( 120 Cm ) Pressure Tubing With M / F Connector 4. 12 ( 30 Cm ) Pressure Tubing M / F Connector 5.3 Way Stopcock 6. Male Non Vented Cap ) 1439 Medcon092 Arterial Leadercath 10Cm 18G 1440 Medcon093 Ascend Uretral Dilated Balloon Catheter 5Mm 4Cm 1441 Medcon094 Asepto Syringes ( Disposable ) 1442 Medcon095 Aspiration Needle Size 21 Transbronchial 1443 Medcon096 Autoclave Tape 18 Mm X 50 Mtr 1444 Medcon097 Automatic Disposable Core Biopsy Gun - Should Be Spring Loaded Automated Gun, Should Have One Hand Cocking Mechanism With Notch Roll Handle Design, Should Have Angled Sample Notch To Enhanced Needle Action. Gun Should Have A Choice Of Two Firing Buttons. Should Be Available In 14, 16, 18 & 20 Gauge With Length 10Cm, 16Cm, 20Cm & 25Cm, Should Comply International Safety Standard Like; Ce ( Eu ) / Fda ( Us ) 1445 Medcon098 Av-Set-E Tubing 1446 Medcon099 Axalpro Salt Tablet For Dialysis Ro Plant, 1447 Medcon1240 Ayres T Piece 1448 Medcon100 Bactigrass Dressing 10 Cm X 10 Cm1477 Medcon129 Biopsy Forceps 2.3Mm 230-240 Cm Without Spike 1478 Medcon130 Bis Peadiatric Sensor 1479 Medcon131 Black Braided Silk 1-0, 3 / 8 Circle Reverse Cutting Needle 45Mm, 76Cm 1480 Medcon132 Black Braided Silk 2-0 With Needle Suture 1 / 2 Circle Tapercut 25 Mm Needle , 76 Cm 1481 Medcon133 Black Braided Silk 2-0 With Needle Suture 3 / 8 Circle Reverse Cutting 45 Mm, 76 Cm 1482 Medcon134 Black Braided Silk 3-0 With Needle Suture 1 / 2 Circle Round Body 20 Mm Needle , 76 Cm 1483 Medcon135 Black Hood, For Lgi Endoscope, Round Shaped Distal Attachment Black Cap, Black Color Hood Will Prevent Halation And Provide Better Image, During Zoom Endocsopy, 1484 Medcon136 Black Hood, For Ugi Endoscope, Round Shaped Distal Attachment Black Cap, Black Color Hood Will Prevent Halation And Provide Better Image, During Zoom Endocsopy 1485 Medcon137 Black Silic. Filform Dp Stent 6F / 26Cm 1486 Medcon138 Blanket Long Pediatric 1487 Medcon139 Blue Neem Internal External Denssiflo Ptbd Metal Band 10Fr 1488 Medcon140 Blue Neem Internal External Denssiflo Ptbd Metal Band 12Fr 1489 Medcon141 Blue Neem Internal External Denssiflo Ptbd Metal Band 14Fr 1490 Medcon142 Blue Neem Internal External Denssiflo Ptbd Metal Band 16Fr 1491 Medcon143 Blue Neem Internal External Denssiflo Ptbd Metal Band 8Fr 1492 Medcon144 Bmc Multipurp. Biliary Manipulation Cath 1493 Medcon145 Bone Marrow Biopsy Needle 13 G X 100 Mm 1494 Medcon146 Bone Marrow Biopsy Needle-11 G X 10 Cm 1495 Medcon147 Bone Marrow Needle 16G ( Aspiration Needle ) 1496 Medcon148 Bougie 36Fr Gct360 1497 Medcon149 Bowie Dick Test Pack For Steam Sterilization 1498 Medcon150 Bp Cuff For Schiller Truescope Elite A5 Monitor ( Adult ) 1499 Medcon151 Braided Long Sheath With Atraumatic Tip For Carotid & Distal Procedures, Hemostatic Valves ( Cross Cut Valve & Tbv- Detachable Valves For Thrombus Management ) , Gold Coil Marker – For Distal Visibility, Ptfe Coating – Seamless Device Transition, • Distal Hydrophilic Coating And Available In 6F, 7F, 8F And Lengths 45Cm, 65 Cm, 90 Cm 1500 Medcon152 Broncoflex Aglie ( Pediatric ) 1501 Medcon153 Broncoflex Aglie ( Pediatric ) 1502 Medcon154 Broncoflex Vortex ( Adult ) 1503 Medcon155 Bt Set, Blood Transfusion Set With Luer Lock 40 Micron Filter& 200Micron 1504 Medcon156 Bubble Electrode Set Ecg Machine 1505 Medcon157 Bulldog Clamp Medi Ang. White 1001-501 ( 25-30Grams ) 1506 Medcon158 Bulldog Clamp Mini St. Red 1001-502 ( 10-15Grams ) 1507 Medcon159 C Circuit ( Adult ) Mapleson “C” Circuit W Ith Breathing Bags Connectors And Breathing Valve 1508 Medcon160 C Circuit ( Paed ) ( C Circuit Mapleson “C” Circuit With Breathing Bags Connectors And Breathing Valve ) 1509 Medcon161 C1 Catheter 5Fr Optitorque 65Cm 1510 Medcon162 C-1 Catheter5fr / 65Cm 1511 Medcon163 C2 Cath.65Cm-5Fr 1512 Medcon164 C2 Catheter 5Fr Opti Torque 80Cm / 65Cm 1513 Medcon165 Cadd Medication Casette Reservoir 250Ml With Cadd Extension Set 1514 Medcon166 Calibration Pigtail Cath.5Fr 1515 Medcon167 Camera Cover Laparoscopic Camera Sterile Cover ( Disposable ) 1516 Medcon168 Canula 20 Ga 1.161N / 1.1X30mm Insyte Autoguard Winged Bd Vialan Material Wit 1517 Medcon169 Canula 22 Ga 1.001N / 0.9X25mm Insyte Winged Without Injport Bd Vialan Materi 1518 Medcon170 Capd Fluid 1.5% 2Lt. 1519 Medcon171 Capd Fluid 2.5% 2Ltr. 1520 Medcon172 Capd Fluid 4.5% 2Ltr. 1521 Medcon173 Capd Icodextrin Fluid 7.5% 2 Ltr. 1522 Medcon174 Cardiac Output Disposable Catheter ( Make Pulsion Getinge ) 1523 Medcon175 Cardiac Output Injectate Housing ( Make: - Pulsion Getinge ) 1524 Medcon176 C-Arm Cover Set 1525 Medcon177 Cartridge For Linear Stapler Without Knife 90Mm: Green Compatible 1526 Medcon178 Cartridge For Ta 30Mm 3.5Mm 1527 Medcon179 Cartridge Tr45w For Ets45 2.5Mm, 45Mm Stapler 1528 Medcon180 Cartridges For Linear Stapler 100Mm: Blue Compatible 1529 Medcon181 Cartridges For Linear Stapler 100Mm: Green Compatible 1530 Medcon182 Cartridges For Linear Stapler 55-60Mm: Blue Compatible 1531 Medcon183 Cartridges For Linear Stapler 55-60Mm: Green Compatible 1532 Medcon184 Cartridges For Linear Stapler 75-80Mm: Blue Compatible1533 Medcon185 Catheter Mount -With Swivel End And Port For Suction And Fibre Optic Bronchoscope.It Must Have A Mechanism / Provision For Minimizing Loss Of Ventilatory Gases. It Should Have Standard Size Ends For Connecting The Breathing Circuit And Et Tube. ) 1534 Medcon186 Cavafix 16G* 70 Cm 1535 Medcon187 Central Venous Catheter 8.5Fr, 13Cm Four Lumen 1536 Medcon188 Central Venous Catheter Bactiguard Coating 3 Lumen 16Cm 1537 Medcon189 Central Venous Catheter Set For Seldinger Technque 5F X 3 ( 8Cm ) Paediatric 1538 Medcon190 Central Venous Catheterization Set 16 G 1539 Medcon191 Certofix Trio Paed 3 Lumen 5 Fr 8 Cm 1540 Medcon192 Check Flow 3Way, 5Fr, 7.5Cm Sheath 1541 Medcon193 Check Flow 3Way, 9Fr Sheath 1542 Medcon194 Check Flow Introducer 4 Fr, 5Fr, 6Fr, 7Fr, 8Fr & 9Fr., Length 7Cm, 7.5 Cm & 11Cm 1543 Medcon195 Chemical Indicator Eto Class 5 1544 Medcon196 Chemical Indicator Eto Class 6 1545 Medcon197 Chemical Indicator H2o2 Plasma 1546 Medcon198 Chemical Indicator Steam Class 5 1547 Medcon199 Chemical Indicator Steam Class 6 1548 Medcon200 Chemical Indicator Tape H2o2 Plasma 1549 Medcon201 Chemoport Needle Size 20 ( Wing Hubber Needle Set With Injection Site Port ) 1550 Medcon202 Chemoport Size - 7.2 And 9.2 1551 Medcon203 Chest Drainage Catheter, Without Trocar, 20Fr Drainage Catheter - Locking Loop ( Without Trocar ) 1552 Medcon204 Chest Drainage Catheter, Without Trocar, 24Fr Drainage Catheter - Locking Loop ( Without Trocar ) 1553 Medcon205 Chest Drainage Catheter, Without Trocar, 28Fr Drainage Catheter - Locking Loop ( Without Trocar ) 1554 Medcon206 Chibba Biopsy Needle 18G / 15Cm 1555 Medcon207 Chitosan Haemostatic Dressing Size 2.0 X2.0Cm 1556 Medcon208 Chitosan Haemostatic Dressing Size 3.5 X3.5Cm 1557 Medcon209 Circular End To End Anastomosis Stapler ( Curved ) 21Mm 1558 Medcon210 Circular End To End Anastomosis Stapler ( Curved ) 25Mm 1559 Medcon211 Circular End To End Anastomosis Stapler ( Curved ) 28Mm 1560 Medcon212 Circular End To End Anastomosis Stapler ( Curved ) 29Mm 1561 Medcon213 Circular End To End Anastomosis Stapler ( Curved ) 31Mm 1562 Medcon214 Circular End To End Anastomosis Stapler ( Curved ) 33Mm 1563 Medcon215 Clamp Electrode Set Ecg Machine1564 Medcon216 Clip For Colostomy Bag 1565 Medcon217 Closed Suction Catheter 14 Fr 1566 Medcon218 Closed Suction Catheter 8 Fr 1567 Medcon219 Co2 Side Stream M2741a For Philips Mp 60 1568 Medcon220 Coated Blade Extended Electrode Length 10.16Cm , 6 1569 Medcon221 Coated Blade Extended Electrode Length 16.51Cm , 4 1570 Medcon222 Coaxial Semi Automatic ( 2 Step ) Core Biopsy Gun With 1Cm / 2Cm Throw Length With Variable Needle Length ( 10Cm / 15Cm / 20Cm ) 1571 Medcon223 Codon Set 1572 Medcon224 Coil 0.018 “ Platinum Coil 0.018 “ Platinum Fibered All Size 1573 Medcon225 Cold Disinfectant For Haemodialysis Machine Based On Peracetic Acid 1574 Medcon226 Colonoscope Cytol Brush 1575 Medcon227 Combined Epidural 27G / 18G 1576 Medcon228 Compatible Cartridges For Linear Cutting Stapler 75-80Mm: Green 1577 Medcon229 Compatible Roticulating Cartridge With Blade For Universal Endoscopic Cutting Stapler 45 Mm : Blue 1578 Medcon230 Compatible Roticulating Cartridge With Blade For Universal Endoscopic Cutting Stapler 45 Mm : Green 1579 Medcon231 Compatible Roticulating Cartridge With Blade For Universal Endoscopic Cutting Stapler 45 Mm : White 1580 Medcon232 Compatible Roticulating Cartridge With Blade For Universal Endoscopic Cutting Stapler 60 Mm : Blue 1581 Medcon233 Compatible Roticulating Cartridge With Blade For Universal Endoscopic Cutting Stapler 60 Mm : Green 1582 Medcon234 Compatible Roticulating Cartridge With Blade For Universal Endoscopic Cutting Stapler 60 Mm : White 1583 Medcon235 Compatible Straight Cartridge With Blade For Universal Endoscopic Cutting Stapler 60 Mm : Blue 1584 Medcon236 Complete Evl Band Set With Handle 1585 Medcon237 Comptible Probe For Haemostatic Powder 1586 Medcon238 Cotton Leung Biliary Stent - All Sizes 1587 Medcon239 Crape Bandage 15Cm X 4Mtr 1588 Medcon240 Crape Paper 100 Cm X 100 Cm 1589 Medcon241 Crape Paper 120 Cm X 120 Cm 1590 Medcon242 Crape Paper 90 Cm X 90 Cm 1591 Medcon243 Crrt Kit Prismaflex Oxiris Cytokin Filter 1592 Medcon244 Ct Single 155Cm Coiled Line 1593 Medcon245 Cvp Catheter 4.5Fr. 6Cm Triple Lumen 1594 Medcon246 Cvp Catheter 4.5Fr. 8Cm Triple Lumen 1595 Medcon247 Cvp Manometer ( Non Toxic , Sterile , Pyrogen Free ) 1596 Medcon248 Cystotome 8.5Fr. 1597 Medcon249 Cytosorb Filter 1598 Medcon250 Densimac Single Step Drainage Set 5F 1599 Medcon251 Densimac Single Step Drainage Set 6Fr1636 Medcon288 Double J Stent 6 / 26Cm ( Both End Open ) 1637 Medcon289 Double J Stent 6Fr 20Cm 1638 Medcon290 Double J Stent 6Fr 22Cm 1639 Medcon291 Double J Stent 6Fr, 24Cm 1640 Medcon292 Double Lumen Bionectar Clamps 1641 Medcon293 Double Lumen Cytology Brush For Biliary Cytology 1642 Medcon294 Double Lumen Dialysis Catheter 12 Fr. 1643 Medcon295 Dpmas Filter 1644 Medcon296 Drain Bag 2Ltr. 1645 Medcon297 Drainable Pediatric One-Piece Ostomy Pouch – Flat Barrier 1646 Medcon298 Drainage Cath, Multipurpose, With Trocar, 10Fr 1647 Medcon299 Drainage Cath, Multipurpose, With Trocar, 12Fr 1648 Medcon300 Drainage Cath, Multipurpose, With Trocar, 6Fr 1649 Medcon301 Drainage Cath, Multipurpose, With Trocar, 8Fr 1650 Medcon302 Dressing Kit 1651 Medcon303 Dry Cartidge Soda Bicarbonate 1652 Medcon304 Dual Knite J ( Kd-655 ) ( Olympus ) 1653 Medcon305 Dvt Sleeves, Thigh Length - Large 1654 Medcon306 Dvt Sleeves, Thigh Length - Medium 1655 Medcon307 Dvt Sleeves, Thigh Length - Small 1656 Medcon308 E.T. Styllet ( A ) -10Fr ( 4.7 / 5Mm ) 1657 Medcon309 E.T.Tube Cuffed Size - 2.5 Fr 1658 Medcon310 E.T.Tube Cuffed Size - 3.0 Fr 1659 Medcon311 E.T.Tube Cuffed Size - 3.5 Fr 1660 Medcon312 E.T.Tube Cuffed Size - 4.0 Fr 1661 Medcon313 E.T.Tube Cuffed Size - 4.5 Fr 1662 Medcon314 E.T.Tube Cuffed Size - 5 Fr 1663 Medcon315 E.T.Tube Cuffed Size - 5.5 Fr 1664 Medcon316 E.T.Tube Cuffed Size - 6.0Fr 1665 Medcon317 E.T.Tube Cuffed Size - 6.5 Fr 1666 Medcon318 E.T.Tube Cuffed Size - 7.0 Fr 1667 Medcon319 E.T.Tube Cuffed Size - 7.5 Fr 1668 Medcon320 E.T.Tube Cuffed Size - 8.0 Fr 1669 Medcon321 E.T.Tube Cuffed Size - 8.5 Fr 1670 Medcon322 E.T.Tube Cuffed Size - 9.0 Fr 1671 Medcon323 E.T.Tube Cuffed Size - 3.5 Fr 1672 Medcon324 E.T.Tube Uncuffed Size - 3.0 Fr 1673 Medcon325 E.T.Tube Uncuffed Size - 2.5 Fr 1674 Medcon326 E.T.Tube Uncuffed Size - 3.5 Fr 1675 Medcon327 E.T.Tube Uncuffed Size - 4.0 Fr 1676 Medcon328 E.T.Tube Uncuffed Size - 4.5 Fr 1677 Medcon329 E.T.Tube Uncuffed Size - 5.0 Fr 1678 Medcon330 E.T.Tube Uncuffed Size - 5.5 1679 Medcon331 E.T.Tube Uncuffed Size - 5.5 Fr 1680 Medcon332 E.T.Tube Uncuffed Size - 6.0 Fr 1681 Medcon333 E.T.Tube Uncuffed Size - 6.5 Fr 1682 Medcon334 E.T.Tube Uncuffed Size - 7.0 Fr 1683 Medcon335 E.T.Tube Uncuffed Size - 7.5 Fr 1684 Medcon336 E.T.Tube Uncuffed Size - 8.0 Fr1685 Medcon337 E.T.Tube Uncuffed Size - 8.5 Fr 1686 Medcon338 Ebus-Fna ( Fine Needle ) Aspiration 21 Gauge 1687 Medcon339 Ecg 10 Lead Cable For Tmt Machine ( Rms ) 1688 Medcon340 Ecg 5 Lead Cable For Anesthesia Machine Avance Cs5 1689 Medcon341 Ecg 5 Lead Cable For Penlon M5 Monitor 1690 Medcon342 Ecg 5 Lead Cable For Schiller Truscope Elite A5 1691 Medcon343 Ecg Cable 3 Lead Of Ultrasound Machine ( Philips Epix ) 1692 Medcon344 Ecg Cable 3 Lead Of Ultrasound Machine Siemens Acusson X 300 1693 Medcon345 Ecg Cable 5 Lead ( Philips-M1668a ) 1694 Medcon346 Ecg Cable Dash 5000 ( 2017003-001 ) 1695 Medcon347 Ecg Cable For M50 Edan Monitor 1696 Medcon348 Ecg Cable For Mac 1200 ( 2029893-001 ) Ecg M / C 1697 Medcon349 Ecg Electrode ( Adult ) Liquid Gel 1698 Medcon350 Ecg Electrode ( Adult ) Solid Gel 1699 Medcon351 Ecg Grabber 5 Lead ( Philips-M1971aicu ) 1700 Medcon352 Ecg Lead Set Philips ( Single Length ) Shenzen 1701 Medcon353 Ecg Lead Wire Dash 5000 ( 414556-001 ) 1702 Medcon354 Ecg-5 Lead Grabber M1974aor-Philips Monitor Mp60 1703 Medcon355 Eeg Gold Disc Electrode 48 1704 Medcon356 Eeg Paste Ten 20 1705 Medcon357 Electrosurgical Tip Cleaner / Scratch Pad 1706 Medcon358 Endo View Solution 1707 Medcon359 Endoscopic Hemoclip ( Disposible Single Use ) Instinct Clip 1708 Medcon360 Endoscopic Jejunal Feeding Tube 12Fr. 1709 Medcon361 Endoscopic Jejunal Feeding Tube 14Fr 1710 Medcon362 Endoscopic Jejunal Feeding Tube 15Fr. 1711 Medcon363 Endoscopic Jejunal Feeding Tube 16Fr. 1712 Medcon364 Endourectostomy Stent External 6-12Fr 1713 Medcon365 Endourectostomy Stent External 7-14Fr 1714 Medcon366 Enternal Feeding Bag With Ice Pouch And Transfer Set ( Non-Toxic, Non Pyrogenic, Sterile , Single Use ) 1715 Medcon367 Eo Gas Cartridge 170 Gm For 8Xl Machine 1716 Medcon368 Eo Gas Cartridge 170 Gm For Sun Sterifaab Machine 1717 Medcon369 Epidural 18G 1718 Medcon370 Epidural Catheter Minipack 19G ( 50Mm ) 1719 Medcon371 Epidural Fixator ( Locket ) -16G 1720 Medcon372 Epidural Fixator ( Locket ) -17G 1721 Medcon373 Ercp Catheter 5.5 Fr. / 200-230Cm 1722 Medcon374 Etco2 Sampling Kit 1723 Medcon375 Etco2 Sensor Mainstream For Bpl Monitor1724 Medcon376 Etco2 Sensor Mainstream For Dash 5000 Ge 1725 Medcon377 Etco2 Sensor Mainstream For Mp 60 Philips 1726 Medcon378 Etco2 Sensor Mainstream For Mx 750 Philips 1727 Medcon379 Etco2 Sensor Mainstream For Teama Ventilator Extend Masimo 1728 Medcon380 Ethibond No-2 Ethicon, 1729 Medcon381 Ethibond No-2 Ethicon, W4843 1730 Medcon382 Ethilon 2 / 0, Reverce Cutting 1731 Medcon383 Eto ( Pcd ) Process Challenge Device 1732 Medcon384 Eto Print Paper Lint Free For 8Xl Machine 1733 Medcon385 Eto Tape 18 Mm X 50 Mtr 1734 Medcon386 Eus Balloon Linear 1735 Medcon387 Eus Balloon Radial 1736 Medcon388 Eus Fna Needle ( 19G, 22G, 25G ) 1737 Medcon389 Eus Fnb Needle 22G & 25G 1738 Medcon390 Eus Needle Echotip 20C Procure 1739 Medcon391 Eus-Cpn Needle ( All Sizes ) 1740 Medcon392 Eusol Solution 1741 Medcon393 Examination Gloves Latex Powdered ( Small, Medium, Large ) 1742 Medcon394 Expect Eus Fna Needle 22G 1743 Medcon395 Expiratory Cassette Assembly For Aeonmed Ventilator 1744 Medcon396 Expiratory Cassette Assembly For Allied Transport Ventilator 1700 1745 Medcon397 Expiratory Cassette Assembly For Ventilator Mek 2000 1746 Medcon398 Expiratory Flow Sensor For Aeonmed Ventilator 1747 Medcon399 Expiratory Flow Sensor For Allied Transport Ventilator 1700 1748 Medcon400 Expiratory Flow Sensor For Teema Ventilator 1749 Medcon401 Expiratory Flow Sensor For Ventilator Mek 2000 1750 Medcon402 Expiratory Valve For Extend Teema Ventilator 1751 Medcon403 Ext.Line With 3 Way Stop Cock With Needle Free With Low Dead Space ( 10Cm ) 1752 Medcon404 Ext.Line With Needle Free Valve Inj Port ( 10Cm ) 1753 Medcon405 Extension Line With Male Luerlock And 3 Way Stop Cock 100Cm 1754 Medcon406 Extension Line With Male Luerlock And 3 Way Stop Cock 200Cm 1755 Medcon407 Extension Line With Male Luerlock And 3 Way Stop Cock 50Cm 1756 Medcon408 External Biliary Drainage Cath 10Fr. 1757 Medcon409 External Biliary Drainage Cath 8Fr. 1758 Medcon410 Extn Cable For Schiller Truscope A51759 Medcon411 Ezdilate Balloon- Multi-Sized Dilatation Function ( 16-17-18Mm ) , Round Edges, Ultra-Clear Material, Centre Visual Marker With Proximal And Distal Radiopaque Markers, Working Length- 2400Mm 1760 Medcon412 Ezdilate Balloon- Multi-Sized Dilatation Function ( 11-12-13Mm ) , Round Edges, Ultra-Clear Material, Centre Visual Marker With Proximal And Distal Radiopaque Markers, Working Length- 2400Mm 1761 Medcon413 Ezdilate Balloon- Multi-Sized Dilatation Function ( 13.5-14.5-15.5Mm ) , Round Edges, Ultra-Clear Material, Centre Visual Marker With Proximal And Distal Radiopaque Markers, Working Length- 2400Mm 1762 Medcon414 Ezdilate Balloon- Multi-Sized Dilatation Function ( 6-7-8Mm ) , Round Edges, Ultra-Clear Material, Centre Visual Marker With Proximal And Distal Radiopaque Markers, Working Length- 2400Mm 1763 Medcon415 Ezdilate Balloon- Multi-Sized Dilatation Function ( 8.5-9.5-10.5Mm ) , Round Edges, Ultra-Clear Material, Centre Visual Marker With Proximal And Distal Radiopaque Markers, Working Length- 2400Mm 1764 Medcon416 Ez-Shot 22G Without Side Hole Nitinol Needle, Coil Sheath With Multi-Layer Construction, Needle Tip Menghini Cut Type 1765 Medcon417 Ez-Shot 3 Plus 19G, Nitinol Needle, Metal Coil Sheath With Multi-Layer Construction, Menghini Cut Type Tip With Resilient Shape, Luer-Lock Connector With Anti-Slip Rubber Grips On Handle 1766 Medcon418 Ez-Shot 3 Plus 22G With Side Hole, Nitinol Needle, Metal Coil Sheath With Multi-Layer Construction, Menghini Cut Type Tip With Resilient Shape, Luer-Lock Connector With Anti-Slip Rubber Grips On Handle 1767 Medcon419 Ez-Shot 3 Plus 25G, Nitinol Needle, Metal Coil Sheath With Multi-Layer Construction, Menghini Cut Type Tip With Resilient Shape, Luer-Lock Connector With Anti-Slip Rubber Grips On Handle 1768 Medcon420 Face Mask - N95 1769 Medcon421 Face Mask 3 Ply ( 100Pcs / Pkt ) 1770 Medcon422 Face Mask Three Layer With Melt Blown Filter 1771 Medcon423 Face Mask 3 Ply ( 50 Pcs / Pkt ) 1772 Medcon424 Film Dressing 9Cm * 10 Cm ( Film Dressing 9Cm * 10 Cm. Sterile, Transparent, Semipermeable Membrane, Should Be Water Proof , Bacteria Proof , Breatheable.Dressing Should Have High Moisture Vapour Transmission Rate ) 1773 Medcon425 Flat Reel 10 Cm X 200 Mtr 1774 Medcon426 Flat Reel 15 Cm X 200 Mtr 1775 Medcon427 Flat Reel 20 Cm X 200 Mtr 1776 Medcon428 Flat Reel 25 Cm X 200 Mtr 1777 Medcon429 Flat Reel 30 Cm X 200 Mtr 1778 Medcon430 Flat Reel 40 Cm X 200 Mtr1779 Medcon431 Flexible, Self-Expanding Prosthesis Comprising Of Dual Layer Eptfe Encapsulation With Carbon Impregnation On Luminal Surface To Reduce Intimal Hyperplasia, It Should Be Highly Flexible And Fracture Resistant For Tortous Vessel Like Cephalic Arch And Sfa.The Stent Should Be Available In Straight And Flared Configurations. Available Diameter Should Be 6Mm To 10 Mm In Different Lengths 1780 Medcon432 Flow Sensor -Aestiva 5 Ge Anesthesia M / C 1781 Medcon433 Flow Sensor-Anesthesia Machine Avance Cs5 1782 Medcon434 Flow Thru Housing 1783 Medcon435 Flow Track Sensor 1784 Medcon436 Fogarty Catheter 4Fr 1785 Medcon437 Fogarty Catheter 5Fr 1786 Medcon438 Foleys Catheter 2 Way Size 06 Fr ( Latex ) 1787 Medcon439 Foleys Catheter 2 Way Size 06 Fr ( Silicon ) 1788 Medcon440 Foleys Catheter 2 Way Size 08 Fr ( Silicon ) 1789 Medcon441 Foleys Catheter 2 Way Size 08Fr ( Latex ) 1790 Medcon442 Foleys Catheter 2 Way Size 10Fr ( Latex ) 1791 Medcon443 Foleys Catheter 2 Way Size 10Fr ( Silicon ) 1792 Medcon444 Foleys Catheter 2 Way Size 12Fr ( Latex ) 1793 Medcon445 Foleys Catheter 2 Way Size 12Fr ( Silicon ) 1794 Medcon446 Foleys Catheter 2 Way Size 14Fr ( Latex ) 1795 Medcon447 Foleys Catheter 2 Way Size 14Fr ( Silicon ) 1796 Medcon448 Foleys Catheter 2 Way Size 16Fr ( Latex ) 1797 Medcon449 Foleys Catheter 2 Way Size 16Fr ( Silicon ) 1798 Medcon450 Foleys Catheter 2 Way Size 18Fr ( Latex ) 1799 Medcon451 Foleys Catheter 2 Way Size 18Fr ( Silicon ) 1800 Medcon452 Foleys Catheter 2 Way Size 22Fr ( Latex ) 1801 Medcon453 Foleys Catheter 3 Way 18 Fr ( Latex ) 1802 Medcon454 Foleys Catheter 3 Way 18 Fr ( Silicon ) 1803 Medcon455 Foleys Catheter 3 Way 20 Fr ( Silicon ) 1804 Medcon456 Foleys Catheter 3 Way 22 Fr ( Silicon ) 1805 Medcon457 Foleys Catheter 3 Way 24 Fr ( Latex ) 1806 Medcon458 Foleys Catheter 3 Way 24 Fr ( Silicon ) 1807 Medcon459 Foleys Catheter 3 Way Size 20Fr ( Latex ) 1808 Medcon460 Foleys Catheter 3 Way Size 22Fr ( Latex ) 1809 Medcon461 Formalin 40% Solution-400Ml 1810 Medcon462 Frame ( Pressure Spring & Magnet ) For Infusomat 1811 Medcon463 Frova Intubating Introducer 14Fr ( Bougie ) 1812 Medcon464 Frova Intubating Introducer 8Fr ( Bougie ) 1813 Medcon465 Gamjee Pad Plain 6X4 Pcs ( Pkt Of 02 Pcs ) 1814 Medcon466 Gamjee Pad Plain 6X4 Pcs ( Pkt Of 03 Pcs ) 1815 Medcon467 Gauze Piece Plain 10 X 10 X 12 Ply ( Pkt. Of 05 Pcs ) 1816 Medcon468 Gauze Piece Plain 7.5 X 7.5 X 12 Ply ( Pkt. Of 05 Pcs ) 1817 Medcon469 Gauze Piece With Radio Opaque Marker 10X10x12 Ply 1818 Medcon470 Gauze Than 90 Cm X 18 Mtr 450 Gm 1819 Medcon471 Gelfoam Hemostat - 7X5x1.0Cm 1820 Medcon472 Gi Fiber Slimline 365 Micron, Finer Length 4.25M 1821 Medcon473 Glidecath 4F All Shapes And Lengths 1822 Medcon474 Glidecath 5F All Shapes And Lenghts 1823 Medcon475 Glidecath Cobra-1, 4F Terumo 1824 Medcon476 Glidecath Headhunter1, 4F / 5F Terumo 1825 Medcon477 Glucon-D Powder 100Gm 1826 Medcon478 Graft Ringed Ptfe Graft, Size 8Mmx40cm 1827 Medcon479 Guesseted Reel 40 Cm X 100 Mtr 1828 Medcon480 Gun For Documentation Label 1829 Medcon481 H.D.Bicarbonate Fluid K ( Potassium ) ++ Free- 5Ltr. 1830 Medcon482 Haemostatic Powder For Endoscopic Use 1831 Medcon483 Hansaplast Spot Bandaid 1832 Medcon484 Harmonic Focus 17 Cm 1833 Medcon485 Harmonic Hand Piece ( Hp Blue ) Compatible Open Surgery1834 Medcon486 Head- 3 Point Fixation - It Should Be Compatible With Our Existing Macromedics Multi-Board Baseplate And Brainlab. Thermoplastic Mask Should Have Superior Molding Properties That Result In Comfortable Patient Immobilization. The Thermoplastic Mask Should Be Of 3.2Mm Thickness For Good Immobilization. The Perforations In The Cast Should Be Between 22-36% Of The Cast Volume. It Should Be Stable Enough To Prevent From Chin-Drop And Shoulder Rotation. The Mask Should Have Superior Stability That Limits Patient Displacement To Less Than 1.5 Mm Within The Mask. Should Provide Non-Sticking Coating To Prevent Sticking To The Patient’S Hair, Skin, The Hardware And From Thermoplast To Thermoplast. The Mask Should Have The Ability To Be Remolded. 1835 Medcon487 Head, Neck &Amp; Shoulder- 5 Point Fixation - It Should Compatible With Our Existing Macromedics Multi-Board Baseplate And Brainlab. The Mask Should Be Of Hybrid Or Reinforced Material For Head &Amp;Neck-5Point Fixation Casts. Thermoplastic Mask Should Have Superior Molding Properties That Result In Comfortable Patient Immobilization. The Thermoplastic Mask Should Of 3.2Mm Thickness For Good Immobilization. The Perforations In The Cast Should Be Between 22-36% Of The Cast Volume. It Should Be Stable Enough To Prevent From Chin-Drop And Shoulder Rotation. The Mask Should Have Superior Stability That Limits Patient Displacement To Less Than 1.5 Mm Within The Mask. Should Provide Non-Sticking Coating To Prevent Sticking To The Patient’S Hair, Skin, The Hardware And From Thermoplast To Thermoplast. The Mask Should Have The Ability To Be Remolded. 1836 Medcon488 Heat Disinfectant For Haemodialysis Machine With Recirculation 1837 Medcon489 Heel & Ankle Protector 1838 Medcon490 Hemolok – Polymer Extra Large Clips ( Box Of 14 Cartridges ) – Code 544250 1839 Medcon491 Hemolok – Polymer Large Clips ( Box Of 14 Cartridges ) Code - 544240 1840 Medcon492 Hemolok – Polymer Medium Large Clips ( Box Of 14 Cartridges ) – Code -544230 1841 Medcon493 Hemolon ( Savlon ) 1842 Medcon494 Hemoprfusion Cartridge Ps Mgm ( Sepsis ( Cytokin Filter ) Ha330 1843 Medcon495 Hemospray 10Fr 1844 Medcon496 Hemospray 7Fr1875 Medcon527 Ibp Transducer Kit ( Cables To Be Provided As Foc Compatible For Ge, Philips, Monet, Schiller, Mintray, Edan & Penlon Monitors Etc As And When Required ) 1876 Medcon528 Incision Drape 48 Cm X 60 Cm 1877 Medcon529 Indwelling Pleural & Peritoneal Drainage Kit ( Vacuum Bottles ) 1878 Medcon530 Infant Feeding Tube Size 05 Fg 1879 Medcon531 Infant Feeding Tube Size 06 Fg 1880 Medcon532 Infant Feeding Tube Size 08 Fg 1881 Medcon533 Infant Feeding Tube Size 10 Fg 1882 Medcon534 Infant / Paed. Crrt Kit Prismaflex Hf20 Set 1883 Medcon535 Infant / Paediatric Crrt Kit Prismaflex Set 1884 Medcon536 Inflation System Esophageal, Pyloric & Colonic Balloons 60Cc Syinge Integrated Inflation System For Esophageal, Pyloric & Colonic Balloons 60Cc Syringe Assembly W Ith Gauge 1885 Medcon537 Infusor Multirate Sv Nominal Flow Rate 2Ml / H 1886 Medcon538 Inj Port ( Single ) One Way Ext Line With Needle Free Valve- 1887 Medcon539 Injection Cassette H2o2 Plasma Sterilizer Sterrad 100 S 1888 Medcon540 Ink Roll For Documentation Label Gun 1889 Medcon541 Instrument Lubricant 1890 Medcon542 Insulin Syringe 100 Iu 1891 Medcon543 Insulin Syringe 40 Iu 1892 Medcon544 Internal External Ptbd Metal Band - All Sizes 1893 Medcon545 Intravascular Retriever Snare Kit Having Interlaced Nitinol Multi Loop. Kit Should Contain Snare And It Compatabile Catheter 1894 Medcon546 Introducer Needle 18G X 2.5 1895 Medcon547 Introducer Set / Pusher Od 10Fr 1896 Medcon548 Introducer Sheath 10Fr - 11Cm Mri Compatible / Plastic Sheath 1897 Medcon549 Invos Sensor ( Adult ) 1898 Medcon550 Invos Sensor ( Paediatric ) 1899 Medcon551 Isolation Bag – For Keeping The Graft Organ 1900 Medcon552 Isopropul Rubbing Alcohol 70% 1 Ltr. 1901 Medcon553 It Knite 2 ( Kd-611L ) 1902 Medcon554 It Knite Nano ( Olympus ) 1903 Medcon555 Iv Cannula - 24G 1904 Medcon556 Iv Cannula With Safety Lock-14 G 1905 Medcon557 Iv Cannula With Safety Lock-16G 1906 Medcon558 Iv Cannula With Safety Lock-18 G 1907 Medcon559 Iv Cannula With Safety Lock-20G 1908 Medcon560 Iv Cannula With Safety Lock-22G 1909 Medcon561 Iv Flow Regulator Expansion Set 1910 Medcon562 Iv Set ( Infusion Set Non-Vented ) 1911 Medcon563 Iv Set ( Vented Iv Drip Set ) 1912 Medcon564 Iv Set Safeset1913 Medcon565 Iv Set Vented Leur Slip 1914 Medcon566 Iv Transp. Dressing ( Velfix-Edge ( 10 Cm*12 Cm ) 1915 Medcon567 Ivc Filter With Low Profile 5F Inner Diameter Delivery System, Electro-Polished One-Piece Nitinol Filter Body Available In Femoral And Jugular Approach Having Conical Shape & Dual Level Filtration With Curved Anchors Help Prevent Cranial And Caudal Migration, Same Filter Assembly For Both Femoral And Jugular Approach 1916 Medcon568 Kmp 5.0Fr 1917 Medcon569 Knee Pad 1918 Medcon570 L-70 Tubing Hotline Fluid Warmer Set 1919 Medcon571 Lancet Needle 1920 Medcon572 Laproscopic Shear 5 Mm ( 36Cm ) 1921 Medcon573 Laser Cut Vascular Stent With High Visibility And Radial Stength 10X100 1922 Medcon574 Laser Cut Vascular Stent With High Visibility And Radial Stength 10X120mm 1923 Medcon575 Laser Cut Vascular Stent With High Visibility And Radial Stength 10X60mm 1924 Medcon576 Laser Cut Vascular Stent With High Visibility And Radial Stength 10X80 1925 Medcon577 Laser Cut Vascular Stent With High Visibility And Radial Stength 12X40 1926 Medcon578 Laser Cut Vascular Stent With High Visibility And Radial Stength 14X40 1927 Medcon579 Laser Cut Vascular Stent With High Visibility And Radial Stength 8Mm X 80Mm 1928 Medcon580 Laser Cut Vascular Stent With High Visibility And Radial Stength 8Mmx40mm 1929 Medcon581 Laser Cut Vascular Stent With High Visibility And Radial Stength 8X60 1930 Medcon582 Leucoplast 10Cm X 5M ( Adhesive Tape ) 1931 Medcon583 Leur Lock Syringe Made Of Polycarbonate Barrel With Size 10Ml 1932 Medcon584 Leur Lock Syringe Made Of Polycarbonate Barrel With Size 1Ml 1933 Medcon585 Leur Lock Syringe Made Of Polycarbonate Barrel With Size 20Ml 1934 Medcon586 Leur Lock Syringe Made Of Polycarbonate Barrel With Size 3Ml 1935 Medcon587 Leur Lock Syringe Made Of Polycarbonate Barrel With Size 60Ml 1936 Medcon588 Leur Lock Syringe Made Of Polycarbonate Barrel With Size 6Ml 1937 Medcon589 Level 1 Normothermic Iv Fluid Admin Set Di100 1938 Medcon590 Liga Clip 100 Liga Clip Cartridges: Size 100 1939 Medcon591 Liga Clip 102 Liga Clip Cartridges: Size 102 1940 Medcon592 Liga Clip 200 Liga Clip Cartridges: Size 2001941 Medcon593 Liga Clip 300 Liga Clip Cartridges: Size 300 1942 Medcon594 Liga Clip 400 Liga Clip Cartridges: Size 400 1943 Medcon595 Ligasure Exact Lf 2019 1944 Medcon596 Ligasure Exact Probe For Open Surgery 1945 Medcon597 Ligasure Lf 1923 1946 Medcon598 Ligasure Maryland Jaw For Open Surgery 1947 Medcon599 Linear Cutting Stapler 100 Mm With Preloaded Blue Cartridge 1948 Medcon600 Linear Cutting Stapler 55-60 Mm With Preloaded Blue Cartridge 1949 Medcon601 Linear Cutting Stapler 75-80 Mm With Preloaded Blue Cartridge 1950 Medcon602 Lipiodol 10Ml ( Single Vial ) 1951 Medcon603 Lithium Ion Battery 12 V 7Ah For Aeonmed Ventilator 1952 Medcon604 Lithium Ion Battery 12 V 7Ah For Allied Transport Ventilator 1700 1953 Medcon605 Lithium Ion Battery 12 V 7Ah For Ventilator Mek 2000 1954 Medcon606 Lithium Ion Battery For Allied Patient Monitor 1955 Medcon607 Lithium Ion Battery For Bamc Patient Monitor 1956 Medcon608 Lithium Ion Battery For Bpl Monitor Ultima 1957 Medcon609 Lithium Ion Battery For Edan Patient Monitor 1958 Medcon610 Lithium Ion Battery For Mindray Patient Monitor 1959 Medcon611 Lithium Ion Battery For Potable Pulse Oximeter Rms 1960 Medcon612 Litho Crush Mechanical Lithotriptor 30Mm 1961 Medcon613 Liver Biopsy Gun 16Gx10cm 1962 Medcon614 Liver Biopsy Gun 16Gx16 1963 Medcon615 Liver Biopsy Gun 18G X 10Cm ( Paediatric ) 1964 Medcon616 Liver Transplant Donor Suture Kit 1965 Medcon617 Liver Transplant Recepient Suture Kit 1966 Medcon618 Lma Classic Size 1.5 ( Disposable ) 1967 Medcon619 Lma Classic Size 1.5 ( Reusable ) 1968 Medcon620 Lma Classic Size 2.0 ( Disposable ) 1969 Medcon621 Lma Classic Size 2.0 ( Reusable ) 1970 Medcon622 Lma Classic Size 2.5 ( Disposable ) 1971 Medcon623 Lma Classic Size 2.5 ( Reusable ) 1972 Medcon624 Lma Proseal Introducer Size 3.0-5.0 1973 Medcon625 Lma Proseal Size 3.0 ( Code-150030 ) 1974 Medcon626 Lma Proseal Size 4.0 ( Code-Seph063 ) 1975 Medcon627 Lma Classic Size 3.0 ( Disposable ) 1976 Medcon628 Lma Classic Size 3.0 ( Reusable ) 1977 Medcon629 Lma Classic Size 4.0 ( Disposable ) 1978 Medcon630 Lma Classic Size 4.0 ( Reusable ) 1979 Medcon631 Lma Classic Size 5.0 ( Disposable ) 1980 Medcon632 Lma Classic Size 5.0 ( Reusable ) 1981 Medcon633 Lma Classic Size1.0 ( Disposable ) 1982 Medcon634 Lma Classic Size1.0 ( Reusable ) 1983 Medcon635 Low Calcium Bicarbonate Based Dialysate Soln For Hd 1984 Medcon636 Low Flux Dialyzer 1.3 M2 Polysulfone 1985 Medcon637 Low Flux Dialyzer 1.8 M2 Polysulfone 1986 Medcon638 Lower Body Blanket With Patient Warming System 1987 Medcon639 Lower Body Warming Blanket Compatible For Bair Hugger, Covidien And Gaymar Warming Machine. 1988 Medcon640 Lp Needle 18G ( Quincke Needle For Lumber Puncture Sharp Bavel For Smoth Insurtion ) 1989 Medcon641 Lp Needle 20G ( Quincke Needle For Lumber Puncture Sharp Bavel For Smoth Insurtion ) 1990 Medcon642 Lp Needle 22G ( Quincke Needle For Lumber Puncture Sharp Bavel For Smoth Insurtion ) 1991 Medcon643 Lp Needle 23G ( Quincke Needle For Lumber Puncture Sharp Bavel For Smoth Insurtion ) 1992 Medcon644 Lp Needle 25G ( Quincke Needle For Lumber Puncture Sharp Bavel For Smoth Insurtion ) 1993 Medcon645 Lp Needle 27G ( Quincke Needle For Lumber Puncture Sharp Bavel For Smoth Insurtion ) 1994 Medcon646 Male To Male Connector 1995 Medcon647 Male-Cath Extrnal Catheter Latex ( Extra Large ) 1996 Medcon648 Male-Cath Extrnal Catheter Latex ( Large ) 1997 Medcon649 Male-Cath Extrnal Catheter Latex ( Medium ) 1998 Medcon650 Male-Cath Extrnal Catheter Latex ( Small ) 1999 Medcon651 Malecot Catheter 10Fr. 2000 Medcon652 Malecot Catheter 12Fr. 2001 Medcon653 Malecot Catheter 14Fr. 2002 Medcon654 Malecot Catheter 16Fr. 2003 Medcon655 Malecot Catheter 18Fr. 2004 Medcon656 Malecot Catheter 20Fr. 2005 Medcon657 Malecot Catheter 24Fr. 2006 Medcon658 Malecot Catheter 8Fr. 2007 Medcon659 Mars-Treatment Kit ( Liver Dilysis Kit ) -Gambro 2008 Medcon660 Maxiocel Wound Dressing 10X10 Cm 2009 Medcon661 Mayo Stand Cover 58X137 Cm With 46X56 Cm Absorbent Area 2010 Medcon662 Mcd Isolation Bag – For Keeping The Graft Organ 2011 Medcon663 Merocel 8 Cm Nasal Pack 2012 Medcon664 Mersilk 2-0 Nw 5331 2013 Medcon665 Microbar Hd 300Gm 2014 Medcon666 Micropuncture Set 21G / 7Cm 2015 Medcon667 Monofilament 4-0 Pds Ii / Lotus ( Ref Code -W9102h ) 2016 Medcon668 Monofilament 5-0 70Cm, 3 / 8 Round Bodied 13 Mm 70Cm2017 Medcon669 Monofilament 6-0 With Curved Round Body 8Mm Double Arm Polydiaxonone Monofilament Suture Size 6-0 With Curved Round Body 8Mm Double Arm Needle, 3 / 8 Circle 2018 Medcon670 Monofilament Polydiaxonone 5-0 Pdsii 3 / 8 Round Bodied 13 Mm 70Cm 2019 Medcon671 Monofilament Polydiaxonone 6-0 Pdsii 2020 Medcon672 Monofilament Polyglyconate Cv 6-0, 75Cm Green, 9Mm, 3 / Circle ( Pack Of 36 ) 2021 Medcon673 Monofilament Polyglyconate-1, 150Cm Loop, Green 48Cm, 1 / 2 Circle Taper Point 2022 Medcon674 Motor Rotation For Syringe Pump ( Agilia Injectomat ) 2023 Medcon675 Mpa Cath 65Cm, 5Fr 2024 Medcon676 Mpa Cath 80Cm 5Fr 2025 Medcon677 Mpa Cath. 5Fr 2026 Medcon678 Mri Compatible Ecg Electrodes 2027 Medcon679 Mucus Extractor 2028 Medcon680 Mulin Sheath 8F / 9F / 10F / 12F 2029 Medcon681 Multi Lumen Central Venous Catheter Set For Dialysis 2030 Medcon682 Multi Stage Dilator Balloon 10-11-12Mm 2031 Medcon683 Multi Stage Dilator Balloon 12-13.5-15Mm 2032 Medcon684 Multi Stage Dilator Balloon 15-16.5-18Mm 2033 Medcon685 Multi Stage Dilator Balloon 8-9-10Mm 2034 Medcon686 Multi-3V Plus Stone Extraction Balloon With Three Different Sizes 8.5 / 11.5 / 15Mm, Working Length 1900Mm, Injection Placement Above Type 2035 Medcon687 Multicath 3 Lumen 2036 Medcon688 Multicath 4 Lumen 8.5Fr-16Cm Bloodless 2037 Medcon689 Multifiltrate Av Cassette 2038 Medcon690 Multifiltrate Dialyset Line. 2039 Medcon691 Multifiltrate Filtrate Bag ( 10 Ltr ) 2040 Medcon692 Multifiltrate Substitue Line 2041 Medcon693 Multilumen 7 Fr 16Cm 2042 Medcon694 Multilumen 7 Fr 16Cm With Nitinol Guide Wire 2043 Medcon695 Multilumen-3 Lumen-5.5 Fr 8Cm 2044 Medcon696 Multilumen-3 Lumen-5.5 Fr 8Cm With Nitinol Guide Wire 2045 Medcon697 Multi-Sideport Catheter Infusion Set ( All Size ) 2046 Medcon698 Nasal Cannula Junior - All Sizes ( Compatible With Fisher And Paykel Machine ) 2047 Medcon699 Nasal Prong - Adult ( Nasal Cannula - Adult Nasal Oxygen Catheter With Twin Prongs, Soft Material, Atraumatic. Adult ) 2048 Medcon700 Nasal Prong ( Oxyset ) - Paed ( Nasal Cannula - Paediatric Nasal Oxygen Catheter With Twin Prongs, Soft Material, Atraumatic. Paediatric ) 2049 Medcon701 Nasal Temperature Probe Adult ( Philips Monitor Mp60 ) Uni-Eh 2050 Medcon702 Nasal Temperature Probe Adult ( Philips ) Mp 602051 Medcon703 Nasal Temperature Probe For Ge Dash 5000 2052 Medcon704 Nasal Temperature Probe For Monitor Mp60 Philips ( Pediatric ) 2053 Medcon705 Nasal Temperature Probe Pediatric ( Philips ) Mp 60 2054 Medcon706 Nasojujunal Tube 12Fr. 120Cm 2055 Medcon707 Nasojujunal Tube 15Fr 100Cm 2056 Medcon708 Nasopharyngeal Airway 6.0 2057 Medcon709 Nasopharyngeal Airway 6.5 2058 Medcon710 Nasopharyngeal Airway 7.0 2059 Medcon711 Nasopharyngeal Airway 7.5 2060 Medcon712 Nasopharyngeal Airway 8.0 2061 Medcon713 Nasopharyngeal Airway 8.5 2062 Medcon714 Nbd Cath 10Fr 2063 Medcon715 Nbd Cath 7Fr 2064 Medcon716 N-Butyl Cyanocrylate ( Glue ) 1Ml 2065 Medcon717 Ncircle ( Ntse-030115-Udh ) 3Fr11cm 2066 Medcon718 Nebulizer Kit Paediatric 2067 Medcon719 Nebulizer Kit-Adult 2068 Medcon720 Needle 18G X 1.5 Inch 2069 Medcon721 Needle 22G X 1.0 Inch 2070 Medcon722 Needle 26G X 1.5 Inch 2071 Medcon723 Needle 26Gx0.5 2072 Medcon724 Needle Master, -Single Use Injection Needle , Extra Stiff Sheath To Enhance Penetration And Prevent Kinking, Large Range For Wide Variety Of Applications, Different Needle Bevels To Suit Both Upper And Lower Gi Applications 2073 Medcon725 Neff Percut.Access Set With Nitinol Wire 2074 Medcon726 Nelaton Catheter 10 Fg 2075 Medcon727 Nelaton Catheter 12 Fg 2076 Medcon728 Nelaton Catheter 14Fr 2077 Medcon729 Nelaton Catheter 16 Fr 2078 Medcon730 Nelaton Catheter 18 Fr 2079 Medcon731 Nelaton Catheter 6 Fg 2080 Medcon732 Nelaton Catheter 8Fr 2081 Medcon733 Nibp Air Hose Adult ( Philips-M1599b ) 2082 Medcon734 Nibp Air Hose Adult ( Philips-M1599b ) 2083 Medcon735 Nibp Cuff Adult ( Philips-M1574a ) 2084 Medcon736 Nibp Cuff Adult ( Philips-M1574a ) 2085 Medcon737 Nibp Cuff Adult E-2203J ( Ge Dash 5000 ) 2086 Medcon738 Nibp Cuff Adult E-2203J ( Ge Dash 5000 ) 2087 Medcon739 Nibp Cuff Adult For Anesthesia Machine Avance Cs5 2088 Medcon740 Nibp Cuff Adult For M50 Edan Monitor 2089 Medcon741 Nibp Cuff Adult For Monet 512 ( Rm ) 2090 Medcon742 Nibp Cuff Adult For Penlon M5 Monitor 2091 Medcon743 Nibp Cuff Adult For Truscope Elite A5 2092 Medcon744 Nibp Cuff Adult Penlon Sp M5 Monitor 2093 Medcon745 Nibp Cuff For M50 Edan Monitor 2094 Medcon746 Nibp Cuff Pediatrci For Anesthesia Machine Avance Cs52095 Medcon747 Nibp Cuff Pediatric For Monet 512 ( Rm ) 2096 Medcon748 Nibp Extn Cable For Anesthesia Machine Avance Cs5 2097 Medcon749 Nibp Extn Tubing For Truscope Elite A5 2098 Medcon750 Nibp Hose Adult For Dash 5000 Monitor 2099 Medcon751 Nibp Hose Adult For Dash 5000 Monitor 2100 Medcon752 Nibp Hose Pipe For Monet 512 ( Rm ) 2101 Medcon753 Nibp Hose Pipe For Monet 512 ( Rm ) 2102 Medcon754 Niv Oronasal Full Face Mask- Large 2103 Medcon755 Niv Oronasal Full Face Mask- Medium 2104 Medcon756 Niv Oronasal Full Face Mask- Small 2105 Medcon757 N-Module 220-240V For Syringe Pump B.Braun ( Power Supply ) 2106 Medcon758 Non Absorb. Polymer Ligation Clips 10Mm ( Extra L ) 2107 Medcon759 Non Absorb. Polymer Ligation Clips 10Mm ( Large ) 2108 Medcon760 Non Absorb. Polymer Ligation Clips 5Mm ( Ml ) 2109 Medcon761 Non Ringed Ptfe Graft Sizes 10 Mm 2110 Medcon762 Non Ringed Ptfe Graft Sizes 8Mm 2111 Medcon763 Non Woven Dressing With Non Adherent Pad 9Cm X 12.5Cm 2112 Medcon764 Nuprep ( Skin Prepping Gel ) 2113 Medcon765 Nut Accroche Kit For Syringe Pump ( Agilla Injectomat ) 2114 Medcon766 O2 Sensor - Penlon Anesthesia M / C 2115 Medcon767 O2 Sensor-Aestiva 5 Ge Anesthesia M / C 2116 Medcon768 Occlusion Balloon Catheter ( Compliant ) 2117 Medcon769 Occulusion Sensor For Infusion Pump ( Infusomat P ) 2118 Medcon770 Optiflow Tracheostomy Director C-Opt970 ( Compatible With Fisher & Paykel Machine ) 2119 Medcon771 Oropharyngeal Airway Size 0 2120 Medcon772 Oropharyngeal Airway Size 00 2121 Medcon773 Oropharyngeal Airway Size 000 2122 Medcon774 Oropharyngeal Airway Size 1 2123 Medcon775 Oropharyngeal Airway Size 2 2124 Medcon776 Oropharyngeal Airway Size 3 2125 Medcon777 Oropharyngeal Airway Size 4 2126 Medcon778 Oropharyngeal Airway Size 5 2127 Medcon779 Otsc System Set 11 / 6T 2128 Medcon780 Otsc System Set 12 / 6T 2129 Medcon781 Otsc System Set 14 / 6T 2130 Medcon782 Over The Wire Long-Term Permacath With Valved Introducer 14.5Fr 19 Cm 2131 Medcon783 Over The Wire Long-Term Permacath With Valved Introducer 14.5Fr 23 Cm 2132 Medcon784 Oxygen Face Mask ( Adult ) ( Oxygen Face Mask - Adult Oxygen Face Mask ( Polymask ) Pvc, Transparent With Connecting Tubing For O2 Flow Meter To Provide Metered Oxygen Supply To Patients At Different Concentration, Soft Material, Good Quality Adult ) 2133 Medcon785 Oxygen Mask-Paed ( Oxygen Face Mask - Paediatric Oxygen Face Mask ( Polymask ) Pvc, Transparent With Connecting Tubing For O2 Flow Meter To Provide Metered Oxygen Supply To Patients At Different Concentration, Soft Material, Good Quality Paediatric ) 2134 Medcon786 Oxygen Sensor For I Vent-201 Ventilator 2135 Medcon787 Oxygen Sensor For Teama Ventilator 2136 Medcon788 Oxygen Sensor-Anesthesia Machine Avance Cs5 2137 Medcon789 Pacing Pad ( Adult ) ( For Model- 7731K ) Nihankodhen Defib. 2138 Medcon790 Pacing Pad ( Adult ) ( For Model- Heartstart ) Philips Defib. 2139 Medcon791 Paediatric ( Measured Volume Set 110Ml ( 60 Drops / Ml ) 2140 Medcon792 Paediatric ( Measured Volume Set 150Ml ( 60 Drops / Ml ) 2141 Medcon793 Pancreatic Stent 5Fr / 10Cm 2142 Medcon794 Pancreatic Stent 5Fr / 5Cm 2143 Medcon795 Pancreatic Stent 5Fr / 7Cm 2144 Medcon796 Pancreatic Stent 7Fr / 10Cm 2145 Medcon797 Paraffin Gauze 10Cm X 10Cm ( 10Pcs / Pkt ) 2146 Medcon798 Paraffin Gauze 10Cm X 10Cm ( 20Pcs / Pkt ) 2147 Medcon799 Patient Heated Breathing Tube&Chamber Kit For Airvo2 ( Fisher And Paykel Machine ) 2148 Medcon800 Patient Hose 250 Cm ( Ulrich Med. ) For Ct 2149 Medcon801 Pds 3-0 Nw 9237 / Mass Lnw-9237 2150 Medcon802 Pe Extension Line Small Bore-High Pressure-Low Volume Male / Female Luerlock, Resistant To 40Kg / Cm2 ( 40 Bar ) 2151 Medcon803 Pediatric Permacath 13Cm Insertion Length 28 Cm 2152 Medcon804 Pelvis- 6 Point - It Should Be Compatible With Our Existing Macromedics Multi-Board Baseplate And Brainlab. Thermoplastic Mask Should Have Superior Molding Properties That Result In Comfortable Patient Immobilization. The Thermoplastic Mask Should Be Of 3.2Mm Thickness For Good Immobilization. The Perforations In The Cast Should Be Between 22-36% Of The Cast Volume. It Should Be Stable Enough To Prevent From Chin-Drop And Shoulder Rotation. The Mask Should Have Superior Stability That Limits Patient Displacement To Less Than 1.5 Mm Within The Mask. Should Provide Non-Sticking Coating To Prevent Sticking To The Patient’S Hair, Skin, The Hardware And From Thermoplast To Thermoplast. The Mask Should Have The Ability To Be Remolded. 2153 Medcon805 Percut. Biliary Drain.Cath Pigtail 42Cm / 10F2154 Medcon806 Percutaneous Biliary Drainage Catheter Without Pig Tail ( All Sizes ) 2155 Medcon807 Percutaneous Dilater 10F / 20Cm 2156 Medcon808 Percutaneous Dilaters 16 F / 20Cm 2157 Medcon809 Percutaneous Dilaters 8Fr / 20Cm 2158 Medcon810 Percutaneous Dilator 12Fr 2159 Medcon811 Percutaneous Dilator 22Fr 2160 Medcon812 Percutaneous Trachestomy Kit – All Sizes 2161 Medcon813 Percutaneous Trachestomy Kit ( Portex ) – All Sizes 2162 Medcon814 Peritoneal Dialysis Fluid 1 .5% Dextrose 2 Litre 2163 Medcon815 Pft Filters 2164 Medcon816 Pharmaco Mechanical Thrombolysis Device With Active Infusion Of Thromblytic Agent And Aspiration Suction In Same Catheter 2165 Medcon817 Picc Line 2Fr Neo Natal 2166 Medcon818 Piccard Cath. 5Fr 2167 Medcon819 Pigtail Drainage Catheter 10F 2168 Medcon820 Pigtail Drainage Catheter 12F 2169 Medcon821 Pigtail Drainage Catheter 14F 2170 Medcon822 Pigtail Drainage Catheter 8F 2171 Medcon823 Plasma Filter For Mos Surface 0.6 M2 2172 Medcon824 Plasma Seperator Filter 2173 Medcon825 Platinum Coil 0.035 “ Platinum Fibered All Size 2174 Medcon826 Poliglecaprone { Monocryl } Undyed Size 3-0, 3 / 8 Circle Cutting Ethiprime 25 Mm Needle Monofilament 70 Cm 2175 Medcon827 Poliglecaprone { Monocryl } Undyed Size 4-0, 3 / 8 Circle Reverse Cutting Ethiprime 16 Mm Needle Monofilament 70 Cm 2176 Medcon828 Polyamide Monofilament 2 / 0, 3 / 8 Circle Reverse Curved Cutting Needle45mm, 70Cm 2177 Medcon829 Polyamide Monofilament 3 / 0, 3 / 8 Circle Reverse Curved Cutting Needle 26Mm, 70Mm 2178 Medcon830 Polybutester With Polytribolate 5-0 75Cm Blue 12Mm 2179 Medcon831 Polybutester With Polytribolate 6-0 60Cm Blue 9Mm 2180 Medcon832 Polybutester With Polytribolate 7-0 60Cm Blue 8Mm 2181 Medcon833 Polydiaxonone Monofilament 4 / 0 -17Mm , 3 / 8 Circle Curved Round Body Needle 45Cm 2182 Medcon834 Polydioxanone 3 / 0 1 / 2 Circle , 25Mm Curved Round Body Needle 2183 Medcon835 Polydioxanone No1 Loop 1 / 2 Circle, 45Mm Needle Polydioxanone No1 Loop 1 / 2 Circle, 45Mm Curved Round Body Needle 2184 Medcon836 Polyethersulfone Dialyzer Surface Area 1.3 M2 2185 Medcon837 Polyglactin Coat 2 / 0 1 / 2 , 30Mm Needle Curved Round Body Needle, 90Cm 2186 Medcon838 Polyglactin Coated 3 / 0 1 / 2 Circle, 17Mm Curved Round Body Needle 2187 Medcon839 Polyglactin, Braided, Coated Suture Size 1 With 1 / 2 Circle ( Heavy ) Needle Reverse Cutting 35Mm2188 Medcon840 Polyglactin, Braided, Suture 1, 1 / 2 Circle 40Mm Needle Polyglactin, Braided, Coated Suture Size 1 With 1 / 2 Circle Round Body ( Heavy ) 40Mm Needle 2189 Medcon841 Polyglatin Braided Coated Size 1-0, 135 Cm 6X45cm 2190 Medcon842 Polyglatin Braided Coated Size 1-0, 135 Cm Violet Sutupack 2191 Medcon843 Polyglatin Braided Coated Size 2-0, 135 Cm Violet Sutupack 2192 Medcon844 Polyglatin Braided Coated Size 3-0, 135 Cm Violet Sutupack 2193 Medcon845 Polyglatin Braided Coated Size 4-0, 135 Cm Violet Sutupack 2194 Medcon846 Polyp Traps 2195 Medcon847 Polyprolene 4-0, 1 / 2 Circle Taper 22Mm, 75Cm, Double Needle 2196 Medcon848 Polypropelene Size 3-0, 1 / 2 Circle Round Body Double Needle , 25 Mm 2197 Medcon849 Polypropylene 5 / 0 1 / 2 Circle, 16Mm Curved Round Body Needle, Single Arm 70Cm 2198 Medcon850 Polypropylene 5 / 0 1 / 2 Circle, 16Mm Curved Round Body Needle, Double Arm , 90Cm 2199 Medcon851 Polypropylene 8 / 0 3 / 8 Circle, 8Mm Curved Round Body Needle, Double Arm , Visiblack Needle 2200 Medcon852 Polypropylene Mesh Size 6 X 3 2201 Medcon853 Polypropylene No 1, 1 / 2 Circle, 40Mm Curved Round Body Heavy Needle, 70Cm 2202 Medcon854 Polypropylene Suture Size 4-0 With 1 / 2 Circle Round Body 16 Mm Needle 2203 Medcon855 Polypropylene Suture Size 6-0 With 3 / 8 Circle Round Body 13 Mm Double Arm Needle 60Cm 2204 Medcon856 Polypure 18 S High Flux Dialy ( Allmed ) 2205 Medcon857 Polysulfone 0.8 M2 Dialyzer Without Tubing 2206 Medcon858 Polyurethane Catheter With Seldinger Kit 20G 12Cm ( Paediatric Polyurathane Catheter With Winged Hub For Skin Fixation For Insertion With Seldinger Technique , Radiopaque Catheter. 2207 Medcon859 Polyurethane Catheter With Seldinger Kit 20G 4Cm ( Paediatric Polyurathane Catheter With Winged Hub For Skin Fixation For Insertion With Seldinger Technique , Radiopaque Catheter. 2208 Medcon860 Polyurethane Catheter With Seldinger Kit 20G 6Cm ( Paediatric Polyurathane Catheter With Winged Hub For Skin Fixation For Insertion With Seldinger Technique , Radiopaque Catheter.2209 Medcon861 Polyurethane Catheter With Seldinger Kit 20G 8Cm ( Paediatric Polyurathane Catheter With Winged Hub For Skin Fixation For Insertion With Seldinger Technique , Radiopaque Catheter. 2210 Medcon862 Polyurethane Catheter With Seldinger Kit 22G 15Cm ( Seldinger Technique , Radiopaque Catheter With Fixation Wings ) 2211 Medcon863 Polyurethane Catheter With Seldinger Kit 22G 20Cm ( Seldinger Technique , Radiopaque Catheter With Fixation Wings ) 2212 Medcon864 Polyurethane Catheter With Seldinger Kit 22G 4Cm ( Seldinger Technique , Radiopaque Catheter With Fixation Wings ) 2213 Medcon865 Polyurethane Catheter With Seldinger Kit 22G 6Cm ( Seldinger Technique , Radiopaque Catheter With Fixation Wings ) 2214 Medcon866 Polyurethane Catheter With Seldinger Kit 22G 8Cm ( Seldinger Technique , Radiopaque Catheter With Fixation Wings ) 2215 Medcon867 Potasium Free Bicarbonate Dialysate Soln For Hd 2216 Medcon868 Potassium Chloride Powder For Dialysate 2217 Medcon869 Power Supply For Agilia Injectomat 2218 Medcon870 Ppk Kit 2219 Medcon871 Premium Surgiclip ( Small ) 9.0 2220 Medcon872 Pressure Infusion Bag 500Ml 2221 Medcon873 Pressure Injectable Radiopaque Polyurethane Picc With Flextip, Taper Free Catheter Design With No Latex, Glidethru Peel-Away, Sizes 4 Fr, 5Fr Single Lumen And Double Lumen, Length 40 Cm-55Cm 2222 Medcon874 Pressure Sensor Kit Injectomat ( Agilia Syringe Pump ) 2223 Medcon875 Print Paper ( Roll ) H2o2 Plasma Sterilizer Sterrad 100 S 2224 Medcon876 Printer Paper Roll 2225 Medcon877 Prismaflex M 60 2226 Medcon878 Prismaflex M100 2227 Medcon879 Prolene 0 ( Loop ) Nw 833 R.Body 2228 Medcon880 Prolene 2-0 Nw 844 R.Body 2229 Medcon881 Prolene 5-0 ( Ref Code -W8556 ) 2230 Medcon882 Prolene Mesh 15*15 Pmm1 2231 Medcon883 Prone Head Rest Medium 2232 Medcon884 Pseudocyst Drainage Metalic Stent Size - 10Mmx10cm 2233 Medcon885 Pseudocyst Drainage Metalic Stent Size - 15Mmx10cm 2234 Medcon886 Pseudocyst Drainage Metalic Stent Size - 20Mmx10cm 2235 Medcon887 Pseudocyst Drainage Metalic Stent Size - 6Mmx8cm 2236 Medcon888 Pseudocyst Drainage Metalic Stent Size - 8Mmx8cm 2237 Medcon889 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility 8X80 Mm2238 Medcon890 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility 10X100 Mm 2239 Medcon891 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility 10X120 Mm 2240 Medcon892 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility 10X60mm 2241 Medcon893 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility 10X80 Mm 2242 Medcon894 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility 8X60mm 2243 Medcon895 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility 9X60 2244 Medcon896 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility Diameter=12Mm-14Mm, Length=40Mm-120Mm 2245 Medcon897 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility Diameter=5Mm-10Mm, Length=100Mm & 120Mm 2246 Medcon898 Ptfe Coated Covered Vascular Stent With High Radial Stength And Visibility Diameter=5Mm-10Mm, Length=40Mm-80Mm 2247 Medcon899 Pump Hose For Ulrich Ct Motion Contrast Injector 2248 Medcon900 Pva 200 2249 Medcon901 Pva Particle 300-500 2250 Medcon902 Pva Particle 500-700 2251 Medcon903 Pylo Dry ( H. Pylori Card Test ) 2252 Medcon904 Quatro Sensor Adult 2253 Medcon905 Quatro Sensor Pediatric 2254 Medcon906 Quick Core Biopsy Needle 19G 2255 Medcon907 Rat Tooth Forcep-230-250Cm Length Reusable 2256 Medcon908 Recovery T Kit 40 % O2 2257 Medcon909 Red Rubber Catheter - All Size 2258 Medcon910 Renal Acess And Biopsy Set 100 2259 Medcon911 Renalin Solution 10Lts 2260 Medcon912 Resolution Endoscopic Clips 2261 Medcon913 Retrival Bag Laproscopic ( All Sizes ) 2262 Medcon914 Retrival Bag Laproscopic Ref Wm-Ebm-200 2263 Medcon915 Rim Angiographic Catheter 5Fr 2264 Medcon916 Ring Biliary Drainage Cath 8Fr 50Cm 2265 Medcon917 Ring Biliary Duct Drainage Cath 10Fr 2266 Medcon918 Ring Biliary Duct Drainage Cath 8.3Fr 2267 Medcon919 Ringed Ptfe Graft Size 10Mm 2268 Medcon920 Ringed Ptfe Graft Size 12Mm 2269 Medcon921 Ringed Ptfe Graft Size 16Mm 2270 Medcon922 Ringed Ptfe Graft Size 6Mm 2271 Medcon923 Ringed Ptfe Graft Size 8Mm 2272 Medcon924 Rita Sb Xl Ele Surg Deviced-3.5L15with Electrode 2273 Medcon925 Rita Star Burst Electrosurg.Deviced-2-3Cm.L-10 Wit 2274 Medcon926 Rita Starburst Electrosurg Device D4-7Cm, L-12Cmwi / 2275 Medcon927 Road Runner 0.018X300cm 2276 Medcon928 Roadrunner 0.35*145Cm 2277 Medcon929 Rotational Thrombectomy System - Ready To Use, Single-Piece System Available In Both Low Profile ( 6F ) System More Robust ( 7F ) System For Larger Vessels 2278 Medcon930 Roth Basket Net 2279 Medcon931 Rups Set Needle 38-62.5 ( Portal Puncture Needle 2280 Medcon932 Ryles Tube, Nasogastric 10Fr Nasogastric Tube With Side Aspiration Channel ( Ryles Tube ) Sizes 10Fr 2281 Medcon933 Ryles Tube, Nasogastric 12Fr Nasogastric Tube With Side Aspiration Channel ( Ryles Tube ) Sizes 12Fr 2282 Medcon934 Ryles Tube, Nasogastric 14Fr Nasogastric Tube With Side Aspiration Channel ( Ryles Tube ) Sizes 14Fr 2283 Medcon935 Ryles Tube, Nasogastric 16Fr Nasogastric Tube With Side Aspiration Channel ( Ryles Tube ) Sizes 16Fr 2284 Medcon936 Ryles Tube, Nasogastric 18Fr Nasogastric Tube With Side Aspiration Channel ( Ryles Tube ) Sizes 18Fr 2285 Medcon937 Ryles Tube, Nasogastric 8Fr Nasogastric Tube With Side Aspiration Channel ( Ryles Tube ) Sizes 8Fr 2286 Medcon938 S / Line Disp. Press. Transducer 2287 Medcon939 S~Curve Urethral Dilator Set - All Sizes 2288 Medcon940 Saccet Cuffed E.T Tube 7.5Mm ( Thermosensitive Clear Pvc, Radio-Opaque Blue-Line, Murphy Eye, Colored Suction Lumen With Suction Hole Located Above The Cuffprofile Soft Seal Cuff, Larger Cuff Resting Diameter, Sensitive Pilot Balloon With One Way Valve Id Of Tube Clearly Marked On Pilot Balloon And Tube, Distinctive Blue Inflation Line, Intubations Depth Marker, Clear Tube Marking 15 Mm Connector With Iso 5356 And Iso 7228, Ce Marks. ) 2289 Medcon941 Saccet Cuffed E.T Tube 7Mm ( Thermosensitive Clear Pvc, Radio-Opaque Blue-Line, Murphy Eye, Colored Suction Lumen With Suction Hole Located Above The Cuff Profile Soft Seal Cuff, Larger Cuff Resting Diameter, Sensitive Pilot Balloon With One Way Valve Id Of Tube Clearly Marked On Pilot Balloon And Tube, Distinctive Blue Inflation Line, Intubations Depth Marker, Clear Tube Marking15 Mm Connector With Iso 5356 And Iso 7228, Ce Marks. ) 2290 Medcon942 Saccet Cuffed E.T Tube 8.0Mm ( Thermosensitive Clear Pvc, Radio-Opaque Blue-Line, Murphy Eye, Colored Suction Lumen With Suction Hole Located Above The Cuffprofile Soft Seal Cuff, Larger Cuff Resting Diameter, Sensitive Pilot Balloon With One Way Valve Id Of Tube Clearly Marked On Pilot Balloon And Tube, Distinctive Blue Inflation Line, Intubations Depth Marker, Clear Tube Marking 15 Mm Connector With Iso 5356 And Iso 7228, Ce Marks. ) 2291 Medcon943 Saccet Cuffed E.T Tube 8.5Mm ( Thermosensitive Clear Pvc, Radio-Opaque Blue-Line, Murphy Eye, Colored Suction Lumen With Suction Hole Located Above The Cuffprofile Soft Seal Cuff, Larger Cuff Resting Diameter, Sensitive Pilot Balloon With One Way Valve Id Of Tube Clearly Marked On Pilot Balloon And Tube, Distinctive Blue Inflation Line, Intubations Depth Marker, Clear Tube Marking 15 Mm Connector With Iso 5356 And Iso 7228, Ce Marks. ) 2292 Medcon944 Saftey Disposable Needle Size 24G*1Inch 2293 Medcon945 Scd Exp. Sleeves Thigh Large Size 2294 Medcon946 Scd Exp. Sleeves Thigh Medium Size 2295 Medcon947 Scd Exp. Sleeves Thigh Small Size 2296 Medcon948 Sceptoshield-1 Wet Wipes ( Pack Of 50 Wipes ) 2297 Medcon949 Sclerotherapy ( Injector ) Needle 21G 175Cm 2298 Medcon950 Sclerotherapy ( Injector ) Needle 23G / 200Cm 2299 Medcon951 Sclerotherapy Needle V-Injector 23Gx180cm 2300 Medcon952 Sclerotherapy Needle V-Jector 21G X180cm 2301 Medcon953 Sclerotherapy Needle V-Jector 23G X 230Cm 2302 Medcon954 Scrotal Support Extra Large 2303 Medcon955 Scrotal Support Large 2304 Medcon956 Scrotal Support Medium 2305 Medcon957 Scrotal Support Xxl 2306 Medcon958 Self Expanding Metallic Stent ( Laser Cut ) With Enhanced Visibility ( All Sizes ) 2307 Medcon959 Self Sealing T-Piece Kit ( Nebuliser Kit ) 2308 Medcon960 Semiautomatic Biopsy Gun 18G X 15Cm, Same Gun Capable Of Taking Biopsy With Throw Length 10 / 20Mm 2309 Medcon961 Semirigid Flexible Ureterrenoscope Disposable 2310 Medcon962 Sems Duod / Pyloric Bare Stent - All Sizes 2311 Medcon963 Sems Biliary Bare Stent 10Mm X 10 Cm 2312 Medcon964 Sems Biliary Bare Stent 10Mm X 6Cm 2313 Medcon965 Sems Biliary Bare Stent 10Mm X 8 Cm 2314 Medcon966 Sems Biliary Stent Covered 10Mmx60mm 2315 Medcon967 Sems Biliary Stent Covered 10Mmx80mm 2316 Medcon968 Sems Biliary Stent Uncvd. 10Mmx60mm 2317 Medcon969 Sems Biliary Stent Uncvd. 10Mmx80mm 2318 Medcon970 Sems Biliary Uncovered Stent 10Mmx Size 6, 8, 10Cm 2319 Medcon971 Sems Enteral Duodenal Stent 22Mmx10cm2320 Medcon972 Sems Enteral Duodenal Stent 22Mmx120mm 2321 Medcon973 Sengstaken Tube Adult 18Fr-Blackmore Tube 2322 Medcon974 Sheath 6Fr 45Cm 2323 Medcon975 Sheath 7Fr 45Cm 2324 Medcon976 Shoe Cover Upto Knee Length ( Spun Boud With Pe Coating ) 2325 Medcon977 Silk Sutu Pack 1 Surgical Silk Tie Size 1 In Sterile Foil Overwrap Pack 2326 Medcon978 Silk Sutu Pack 1-0 Surgical Silk Tie Size 1-0 In Sterile Foil Overwrap Pack 2327 Medcon979 Silk Sutu Pack 2-0 Surgical Silk Tie Size 2-0 In Sterile Foil Overwrap Pack 2328 Medcon980 Silk Sutu Pack 3-0 Surgical Silk Tie Size 3-0 In Sterile Foil Overwrap Pack ( 2 X 75Cm ) 2329 Medcon981 Silk Sutu Pack 4-0 Surgical Silk Tie Size 4-0 In Sterile Foil Overwrap Pack 2330 Medcon982 Sim 1 / Sim2 Catheter 5F 2331 Medcon983 Simethicone Emulsion 2332 Medcon984 Single Lumen Picc 4Fr 2333 Medcon985 Single Stage Venous Cannulae 12 Fr-66112 2334 Medcon986 Single Stage Venous Cannulae 14 Fr Ref-66114 2335 Medcon987 Single Stage Venous Cannulae 16 Fr-66116 2336 Medcon988 Single Stage Venous Cannulae 18 Fr-66118 2337 Medcon989 Single Step Drainage Set - All Sizes 2338 Medcon990 Single Use Dual Knife J, Knife Has Knob Shaped Tip, Ceramic Cover To Faciitae Smooth And Safe Manipulation, 2.0Mm Diameter Sheath For Lgi And 1.5Mm, Has Injection Port For Injecting Saline W / O Exchanging The Device, Catheter Length 2300 Mm 2339 Medcon991 Single Use Dual Knife J, Knife Has Knob Shaped Tip, Ceramic Cover To Faciitae Smooth And Safe Manipulation, 2.0Mm Diameter Sheath For Ugi And 1.5Mm For Lgi, Has Injection Port For Injecting Saline W / O Exchanging The Device, Catheter Length 1600 Mm 2340 Medcon992 Single Use Insulated Tip Knife, Insulated Tip Knife For Disc Shaped Electrode, Knife Length-3.5Mm For Ugi, Catheter Length - 2300Mm 2341 Medcon993 Single Use Insulated Tip Knife, Insulated Tip Knife For Ugi, Disc Shaped Electrode, Knife Length-4Mm For Ugi, Catheter Length - 1650Mm 2342 Medcon994 Single Use Triangular Tip Knife J, Triangular Tip Design Knife Length Of 4.5Mm And Thickness Is 0.3Mm, Cutting Knife Diameter Is 0.4Mm, Injection Port For Water Jet Function, Knife Is Compatible With High Voltage Spray Coagulation Mode Of Esu, 2343 Medcon995 Skin Marker Pen With Scale ( Sterile ) 2344 Medcon996 Skin Staple Extractor 2345 Medcon997 Skin Stapler 2346 Medcon998 Sms 100 Cm X 100 Cm 2347 Medcon999 Sms 120 Cm X 120 Cm2348 Medcon1000 Sms 90 Cm X 90 Cm 2349 Medcon1001 Snare Master Plus ( Sd-400U-15 ) ( Olympus ) 2350 Medcon1002 Snaremaster Plus- Hot And Cold Snares, Ideal For Sessile Polyps Or Flat Lesions, Wide-Opening, Oval Snare With Integrated Spiral To Aid Mucosal Grasp, Braided Wire For Improved Coagulation Effect, Integral Handle With Measurement Markings, 10Mm, 2351 Medcon1003 Snaremaster Plus- Hot And Cold Snares, Ideal For Sessile Polyps Or Flat Lesions, Wide-Opening, Oval Snare With Integrated Spiral To Aid Mucosal Grasp, Braided Wire For Improved Coagulation Effect, Integral Handle With Measurement Markings, 15Mm, 2352 Medcon1004 Sodium Citrate Soln Regional Anticoagulation Crrt 2353 Medcon1005 Sohendra Biliary Dilation Cath 10Fr 2354 Medcon1006 Sohendra Biliary Dilation Cath 6Fr 2355 Medcon1007 Sohendra Biliary Dilation Cath 7Fr 2356 Medcon1008 Sohendra Biliary Dilation Cath 8.5Fr 2357 Medcon1009 Specimen Retrieval Bag Independent ( Without Handle ) - All Sizes 2358 Medcon1010 Specimen Retrieval Bag Independent ( Without Handle ) Large 8-12 2359 Medcon1011 Specimen Retrieval Bag Independent ( Without Handle ) Medium 5-8 2360 Medcon1012 Specimen Retrieval Bag With Handle Small 3-6 2361 Medcon1013 Sphincterotome-Triple Lumen, Distal Tip 5-5.5 Fr, 20Mm Cutting Wire, Long Nose 2362 Medcon1014 Sphintrotome Triple Lumen .035” Guide Wire Compatible Pull Type Pre-Curved With Half Cutting Wire Clever-Cut Coating, With C-Hook Working Length=1700Mm Should Have 3Mm Tip 2363 Medcon1015 Spirometer ( Incentive Spirometer Flow Based Incentive Spirometer: Six Flow Settings From 100Ml / Sec To 600Ml / Sec. Mouthpiece Holder. Large Inspiratory Flow Indicator. U Niversal Graphics. Oxygen Port. Compact Size W / Bedrail Holder. Built-In Handle. Dial Location On Back Of Unit. ) 2364 Medcon1016 Spo2 Cable Nellcor 2021406-001 ( Ge Dash 5000 ) 2365 Medcon1017 Spo2 Extn Cable For Anesthesia Machine Avance Cs5 ( Nellcor ) 2366 Medcon1018 Spo2 Finger Sensor Paediatric ( Philips Mx550 Monitor ) 2367 Medcon1019 Spo2 Finger Sensor Paediatric ( Philips Mx750 Monitor ) 2368 Medcon1020 Spo2 Probe Adult For Monet 512 ( Rm ) 2369 Medcon1021 Spo2 Probe Adult Schiller Truscope A5 2370 Medcon1022 Spo2 Sensor Adult ( Philips Mx 550 ) 2371 Medcon1023 Spo2 Sensor Adult ( Philips Mx 750 ) 2372 Medcon1024 Spo2 Sensor Adult ( Philips-M1191bl ) 2373 Medcon1025 Spo2 Sensor Adult For Anesthesia Machine Avance Cs5 ( Nellcor ) 2374 Medcon1026 Spo2 Sensor Adult For Penlon M5 Monitor 2375 Medcon1027 Spo2 Sensor Adult For Portable Pulse Oximeter ( Rms ) 2376 Medcon1028 Spo2 Sensor Ds-100A Reusable ( Ge Dash 5000 ) 2377 Medcon1029 Spo2 Sensor For M50 Edan Monitor 2378 Medcon1030 Spo2 Sensor For Schiller Truescope Elite A5 ( Pediatric ) 2379 Medcon1031 Spo2 Sensor Neonatal Hand / Foot Warp ( Philips Mx550 Monitor ) 2380 Medcon1032 Spo2 Sensor Pediatric For Portable Pulse Oximeter ( Rms ) 2381 Medcon1033 Spo2 Sensor Pediatric For Anesthesia Machine Avance Cs5 ( Nellcor ) 2382 Medcon1034 Spo2 Sensor Pediatric For Penlon M5 Monitor 2383 Medcon1035 Spy Bite Forceps 2384 Medcon1036 Spy Bite Max Biopsy Forcefs 2385 Medcon1037 Spy Glass Access & Delivery Catheter ( All Sizes ) 2386 Medcon1038 Spy Glass Direct Visualization Probe 2387 Medcon1039 Spyglass Retrieval Basket ( Boston ) 2388 Medcon1040 Spyglass Retrieval Snare ( Boston ) 2389 Medcon1041 Stainless Steel Coil 0.035 And 0.018 All Size 2390 Medcon1042 Standard Tip For Cusa 36 2391 Medcon1043 Start Up Kit 2392 Medcon1044 Steam ( Pcd ) Process Challenge Device 2393 Medcon1045 Stent Pusher Catheter 7Fr., 8.5Fr. & 10Fr. 2394 Medcon1046 Steridrape 360 Degree Plastic Fluid Collection Pouch With Loban Incise Film Of Size 30Cm X 30Cm 2395 Medcon1047 Sterile Gel 20 Gm 2396 Medcon1048 Sterrad Casettes 2397 Medcon1049 Sterrad Velocity Biological Indicator ( 43210-30 ) 2398 Medcon1050 Stocking Knee Length Xl 2399 Medcon1051 Stominal Pouch 2400 Medcon1052 Stone Extraction Balloon 16Mm 2401 Medcon1053 Substitution Fluid For Crrt Calcium Free Lactate Free Solution 2402 Medcon1054 Suction Catheter Size 06 - Should Be Good Quality Without Sharp / Rough Edges / Tip With A Side Hole And A Hole At The Tip Having Thumb Control. 2403 Medcon1055 Suction Catheter Size 08 - Should Be Good Quality Without Sharp / Rough Edges / Tip With A Side Hole And A Hole At The Tip Having Thumb Control. 2404 Medcon1056 Suction Catheter Size 10 - Should Be Good Quality Without Sharp / Rough Edges / Tip With A Side Hole And A Hole At The Tip Having Thumb Control. 2405 Medcon1057 Suction Catheter Size 12 - Should Be Good Quality Without Sharp / Rough Edges / Tip With A Side Hole And A Hole At The Tip Having Thumb Control. 2406 Medcon1058 Suction Catheter Size 14 - Should Be Good Quality Without Sharp / Rough Edges / Tip With A Side Hole And A Hole At The Tip Having Thumb Control. 2407 Medcon1059 Suction Catheter Size 16 - Should Be Good Quality Without Sharp / Rough Edges / Tip With A Side Hole And A Hole At The Tip Having Thumb Control. 2408 Medcon1060 Suction Catheter Size 18 - Should Be Good Quality Without Sharp / Rough Edges / Tip With A Side Hole And A Hole At The Tip Having Thumb Control. 2409 Medcon1061 Suction Drain Set800 Ml - Capacity Size 10 2410 Medcon1062 Suction Drain Set800 Ml - Capacity Size 12 2411 Medcon1063 Suction Drain Set800 Ml - Capacity Size 14 2412 Medcon1064 Suction Drain Set800 Ml - Capacity Size 16 2413 Medcon1065 Suction Drain Set800 Ml - Capacity Size 18 2414 Medcon1066 Suction Set Vaccusuck ( Yankeur Suction Tip With A Side Hole ) 2415 Medcon1067 Suction Tube 11Fr. Shaft With 9Fr. Tapered Tip 2416 Medcon1068 Supra Pubic Catheter 16G 2417 Medcon1069 Suprapubic Catheter 12 Fr 2418 Medcon1070 Sureseal Fistula Pressure Bandage 2419 Medcon1071 Surgeon’S Cap - Female Disposable Made Of High Quality Garment And Provide Comfortable Elastic 2420 Medcon1072 Surgeon’S Cap - Male Disposable Made Of High Quality Garment And Provide Comfortable Elastic 2421 Medcon1073 Surgical Blade ( All Size ) 2422 Medcon1074 Surgical Disposable Drape Set Sterile 2423 Medcon1075 Surgical Gown Disposable ( Extra Large ) 2424 Medcon1076 Surgical Gown Disposable ( Large ) 2425 Medcon1077 Surgical Infusion Set 2426 Medcon1078 Surgical Swab With Radio Opaque Marker 30X30x12 Ply 2427 Medcon1079 Surgical Swab With Radio Opaque Marker 30X30x12 Ply Pkt Of 05 Pcs 2428 Medcon1080 Suture Based Vascula Access Closure System ( Proglide ) 2429 Medcon1081 Swan Ganz 7Fr 2430 Medcon1082 Swanganz Vip Catheter 2431 Medcon1083 Sx Ella Danis Stent ( Esophageal ) 2432 Medcon1084 Syringe 01Ml With Needle Must Be 3Pcs Syring With Natural Rubber Gasket 2433 Medcon1085 Syringe 02Ml With Needle Must Be 3Pcs Syring With Natural Rubber Gasket 2434 Medcon1086 Syringe 03Ml With Needle Luer Lock Must Be 3Pcs Syring With Natural Rubber Gasket 2435 Medcon1087 Syringe 05Ml With Needle Must Be 3Pcs Syring With Natural Rubber Gasket 2436 Medcon1088 Syringe 10Ml Luer Lock With Needle Must Be 3Pcs Syring With Natural Rubber Gasket 2437 Medcon1089 Syringe 10Ml With Needle Must Be 3Pcs Syring With Natural Rubber Gasket2438 Medcon1090 Syringe 20Ml With Needle Must Be 3Pcs Syring With Natural Rubber Gasket 2439 Medcon1091 Syringe 20Ml With Needle Luer Lock Must Be 3Pcs Syring With Natural Rubber Gasket 2440 Medcon1092 Syringe 2Ml Luer Lock With Needle Must Be 3Pcs Syring With Natural Rubber Gasket 2441 Medcon1093 Syringe 5 Ml Leur Lock With Needle Must Be 3Pcs Syring With Natural Rubber Gasket 2442 Medcon1094 Syringe 50Ml Luer Lock Must Be 3Pcs Syring With Natural Rubber Gasket 2443 Medcon1095 Syringe 50Ml Without Needle Must Be 3Pcs Syring With Natural Rubber Gasket 2444 Medcon1096 Syringe Detection Kit For Syringe Pump ( Agilla Injectomat ) 2445 Medcon1097 Syringe For Imaxeon Salient Dual Head Pressure Injector 2446 Medcon1098 T U R Infusion Set 2447 Medcon1099 Tannebum Stent 10Fr / 10Cm 2448 Medcon1100 Tannebum Stent 10Fr / 7Cm 2449 Medcon1101 Tape For Plasma Sterilizer 2450 Medcon1102 Tegaderm 5 Cm X5.7Cm 2451 Medcon1103 Tegaderm 10 Cm*12 Cm 2452 Medcon1104 Tegaderm 1635W / Velfix Edge Ref-5504A ( Transparent Dressing ) 2453 Medcon1105 Temporary Occlusion Balloon Microcatheter Occlusafe Termo 2.7Fr 2454 Medcon1106 Tenckhoff D.Cuff Capdcath ( 42Cm Straight ) With Full Insertion Kit 2455 Medcon1107 Termo Hydrophilic Angio G / Wire 180Cm 0.035 J Tip & Straight Tip 2456 Medcon1108 Termo Hydrophilic Angio Guide Wire 180Cm Std 0.032 J-Tip & Straight Tip 2457 Medcon1109 Termo Hydrophilic Angio Guide Wire 260Cm Std 0.035J Tip & Straight Tip 2458 Medcon1110 Termo Guide Wire 0.032 260Cm Straight 2459 Medcon1111 Termo Guide Wire J-Tip 0.032 260Cm 2460 Medcon1112 Termo Guide Wire Straight 0.032 2461 Medcon1113 Termo Hydrophilic Angio Guide Wire 150Cm Std 0.035 J-Tip & Straight Tip 2462 Medcon1114 Terumo Guide Wire 0.032 X 150 J-Tip 2463 Medcon1115 Terumo Guide Wire 0.032X150cm Straight 2464 Medcon1116 Terumo Guide Wire 0.035, 150Cm , Angled Tip 2465 Medcon1117 Terumo Guide Wire 0.035, 150Cm , Straight Tip 2466 Medcon1118 Terumo Guide Wire 0.25 * 150Cm Straight 2467 Medcon1119 Terumo Guide Wire 0.25 X 150Cm Straight 2468 Medcon1120 Terumo Guide Wire 0.28 X 150 J Tip 2469 Medcon1121 Terumo Guide Wire 0.28 X 150Cm Straight 2470 Medcon1122 Terumo Guide Wire 025 X 150 J Tip 2471 Medcon1123 Terumo Guide Wire ( S ) 0.035 2472 Medcon1124 Tetra Cath Wire Guided Basket2473 Medcon1125 Thal Quick Abscess Drainage Set ( All Sizes ) 2474 Medcon1126 Therapeatic Peritonel Dialysis Tray ( Adult ) 2475 Medcon1127 Thermometer ( Digital ) 2476 Medcon1128 Thorax- 4 Point Fixation - It Should Be Compatible With Existing Macromedics Multi-Board Baseplate And Brainlab. Thermoplastic Mask Should Have Superior Molding Properties That Result In Comfortable Patient Immobilization. The Thermoplastic Mask Should Be Of 3.2Mm Thickness Good Immobilization. The Perforations In The Cast Should Be Between 22-36% Of The Cast Volume. It Should Be Enough To Prevent From Chin-Drop And Shoulder Rotation. The Mask Should Have Superior Stability That Limits Patient Displacement To Less Than 1.5 Mm Within The Mask. Should Provide Non-Sticking Coating To Prevent Sticking To The Patient’S Hair, Skin, The Hardware And From Thermoplast Thermoplast. The Mask Should Have The Ability To Be Remolded. 2477 Medcon1129 Three Way Extn. Wth Stop Cock 10Cm ( Non-Toxic, Non Pyrogenic, Sterile , Unidirectional Controlling Flow System 2478 Medcon1130 Three Way Stop Cock ( Non-Toxic, Non Pyrogenic, Sterile Unidirectional Controlling Flow System ) 2479 Medcon1131 Tincture Benzoine 400 Ml 2480 Medcon1132 Titanium Adaptor 2481 Medcon1133 Toomy Syringe 2482 Medcon1134 Tracheostomy Tube Cuffed No 3.5 2483 Medcon1135 Tracheostomy Tube Cuffed No 4 2484 Medcon1136 Tracheostomy Tube Cuffed No 4.5 2485 Medcon1137 Tracheostomy Tube Cuffed No 5.0 2486 Medcon1138 Tracheostomy Tube Cuffed No 5.5 2487 Medcon1139 Tracheostomy Tube Cuffed No 6.0 2488 Medcon1140 Tracheostomy Tube Cuffed No 6.5 2489 Medcon1141 Tracheostomy Tube Cuffed No 7 2490 Medcon1142 Tracheostomy Tube Cuffed No 7.5 2491 Medcon1143 Tracheostomy Tube Cuffed No 8.0 2492 Medcon1144 Tracheostomy Tube Cuffed No 8.5 2493 Medcon1145 Tracheostomy Tube Uncuffed No 3.5 2494 Medcon1146 Tracheostomy Tube Uncuffed No 4 2495 Medcon1147 Tracheostomy Tube Uncuffed No 4.5 2496 Medcon1148 Tracheostomy Tube Uncuffed No 5.0 2497 Medcon1149 Tracheostomy Tube Uncuffed No 6.0 2498 Medcon1150 Tracheostomy Tube Uncuffed No 7.0 2499 Medcon1151 Tracheostomy Tube With Subglottic Suction : Sizes 7.5 2500 Medcon1152 Tracheostomy Tube With Subglottic Suction : Sizes 8.0 2501 Medcon1153 Tranducer Protector 2502 Medcon1154 Transend 014 / 205 / 190Cm Micro Wire 2503 Medcon1155 Transfer Set 2504 Medcon1156 Transfer Set Cap 2505 Medcon1157 Transjuglar Liver Access Biopsy Set2506 Medcon1158 Transjugular Liver Access Set ( Ref Code -Rups-100 ) 2507 Medcon1159 Transparent Dressing Ported 7X9cm 2508 Medcon1160 Transparent Waterproof Dressing With Absorbent Pad Size 25Cm X 10Cm 2509 Medcon1161 Transparent Waterproof Dressing With Absorbent Pad Size 35Cm X 10Cm 2510 Medcon1162 Trichoice Bag 2511 Medcon1163 Triple Lumen Needle Knife 7Fr-5Fr 2512 Medcon1164 Triple-Lumen Jejunal Feeding And Gastric Decompression Tube 16Fr., 150 Cm 2513 Medcon1165 Trolley Cover Non Woven Hydrophobic Fabric ( Gamma Sterile ) 2514 Medcon1166 True Cut Biopsy Needle 18G Spring Loaded Cutting Needle With Triggering Mechanism ( 18 G X 15 Cm ) 2515 Medcon1167 True Cut Biopsy Needle 18G Spring Loaded Cutting Needle With Triggering Mechanism ( 18 G X 15 Cm ) 2516 Medcon1168 True Cut Biopsy Needle 18G Spring Loaded Cutting Needle With Triggering Mechanism ( 18 G X 6 Cm ) 2517 Medcon1169 Tt Knife Nano 2518 Medcon1170 Tubing For Imaxeon Salient Dual Head Pressure Injector 2519 Medcon1171 Tubing For Imaxeon Salient Pressure Injector 2520 Medcon1172 Tunneled Cuffed Double Lumen Chronic Dialysis Catheter With Radiopaque Polyurethane With Antegrade Configuration, Symmetrical Tip Catheter With Sidehole Design, Tapered Tip For Otw Exchange, The Smartseal Hemostatic Dialysis Sheath, Sizes 15 Fr X 19Cm-55Cm 2521 Medcon1173 Tunneled Cuffed Double Lumen Chronic Dialysis Catheter With Radiopaque Polyurethane With Retrograde Configuration, Separate Hub Connection Assembly For Precise Tip Positioning, Symmetrical Tip Catheter With Sidehole Design, Tapered Tip For Otw Exchange, The Smartseal Hemostatic Dialysis Sheath, Sizes 15 Fr X 19Cm-55Cm 2522 Medcon1174 Two Part Puncture Needle 2523 Medcon1175 Tyvek Reel 10 X 70 Mtr 2524 Medcon1176 Tyvek Reel 14 X 70 Mtr 2525 Medcon1177 Tyvek Reel 18 X 70 Mtr 2526 Medcon1178 Tyvek Reel 3 X 70 Mtr 2527 Medcon1179 Tyvek Reel 6 X 70 Mtr 2528 Medcon1180 Ultra Fine Needle 2529 Medcon1181 Ultra Flux Av600s ( Haemofilter ) 2530 Medcon1182 Ultrasound Biopsy Needle 19G And 25G 2531 Medcon1183 Umbilical Cotton Tape 2532 Medcon1184 Umbilical Cotton Tape Size 75Cmx3mm 2533 Medcon1185 Under Pad 90Cm X 60Cm2534 Medcon1186 Under Water Sealed Drainage System 2535 Medcon1187 Universal Clamp For Infusomat B Braun ( 34509054 ) 2536 Medcon1188 Universal Endoscopic Cutting Stapler Xtra Large 2537 Medcon1189 Upper Bod Case Injectomat ( Agilia Syringe Pump ) 2538 Medcon1190 Upper Case For Syringe Pump ( Agilla Injectomat ) 2539 Medcon1191 Ureteral Access Sheath 9.5Fr / 35Cm 2540 Medcon1192 Ureteral Acs.Shet. 12Fr 35Cm 2541 Medcon1193 Ureteral Catheter 5Fr 2542 Medcon1194 Ureteral Catheter 6Fr 2543 Medcon1195 Urine Bag With Meassured Volume Chamber ( Adult ) 2544 Medcon1196 Urine Bag With Meassured Volume Chamber ( Paediatric ) 2545 Medcon1197 Urine Collection Bag For Pediatric Use 2546 Medcon1198 Uringe Collection Bag Adult 2000Ml 2547 Medcon1199 Valved Picc Line 4Fr / 60Cm 2548 Medcon1200 Vascular Access Sheath 7F, 11Cm 2549 Medcon1201 Vascular Loop 3Mm Blue ( Mini ) 2550 Medcon1202 Vascular Loop 3Mm Red ( Mini ) 2551 Medcon1203 Vascular Loop 3Mm Yellow ( Mini ) 2552 Medcon1204 Vascular Loop 5Mm Blue ( Maxi ) 2553 Medcon1205 Vascular Loop 5Mm Red ( Maxi ) 2554 Medcon1206 Vascular Loop 5Mm Yellow ( Maxi ) 2555 Medcon1207 Vascular Snare Kit With Multiple, Independent, Short Profile Loops With Tips On Each Loop Allow For Self-Sizing To Adjust To Changing Vessel Diameter And Complete Vessel Coverage, Shaft And Loops Made With Nitinol Wire For 1:1 Torque Control And Kink-Resistance, Radiopaque Band On Catheter For Increased Visibility Under Fluoroscopy 2556 Medcon1208 Velfix Easy Pad ( 9X12.5 ) 5513-Primapore 2557 Medcon1209 Velsoft Elastic Adhesive Bandage 2558 Medcon1210 Vena Cava Filter Jugular / Subclavian 0.035 2559 Medcon1211 Venaflow Dispo. Calf Cuff 2560 Medcon1212 Ventilator Circuit ( Paediatric ) Expandable 2561 Medcon1213 Ventilator Circuit Adult 2562 Medcon1214 Ventilator Circuit With Humdifire ( A ) 2563 Medcon1215 Ventilator Circuit With Humdifire ( Paediatric ) 2564 Medcon1216 Venturi Kit With Percent Oxygen Lock Air Entrainment System ( Adult ) 2565 Medcon1217 Vessel Cannulae 2 Inch 2 Mm Blunt Tip-30004 2566 Medcon1218 Vessel Cannulae 2.5 Inch 3Mm Blunt Tip-30003 2567 Medcon1219 Vicryl 1 Nw 2826 / Solus Ref-Lnw2826-910 2568 Medcon1220 Visiglide Guidewire St. Type .025 Diameter With Equivalant Stiffness .035 Should Be 7Cm Hydrophilic Tip And 1 To 1 Torque Ability, Should Have Fluorine Quoting 2569 Medcon1221 Volume View Combo Kit 2570 Medcon1222 Vy Star ( Ramp Of 4 Way M / F ) 2571 Medcon1223 Wallgraft Otw 10X50mm ( Wooven Covered Vascular Stent ) 2572 Medcon1224 Wallgraft Otw 10X70mm ( Wooven Covered Vascular Stent ) 2573 Medcon1225 Wallgraft Otw 8X50mm ( Wooven Covered Vascular Stent ) 2574 Medcon1226 Wallgraft Otw 8X70mm ( Wooven Covered Vascular Stent ) 2575 Medcon1227 Washproof Bandaid Regular 2576 Medcon1228 Water Seal Disposable Plastic Bottles 2577 Medcon1229 Water Trap Bottle Of Heater Block Of Ventilator ( Teama ) 2578 Medcon1230 Wet Wipes ( 6X8 ) Of Alkyl Dimethyl Benzyl Ammonium Cchloride 2.37% And Alkyl Dimethyl Ethyl Benzyl Ammonium Chloride Solution 2.37% ( Pack Of 50 Wipes ) 2579 Medcon1231 Wooven Self Expandable Metallic Stent With High Visibility 10X94x75 2580 Medcon1232 Wooven Self Expandable Metallic Stent With High Visibility 24X45x75cm 2581 Medcon1233 Wooven Self Expandable Metallic Stent With High Visibility ( All Sizes ) 2582 Medcon1234 Wooven Self Expandable Metallic Stent With High Visibility 10Mmx68mmx75cm. 2583 Medcon1235 Wooven Self Expandable Metallic Stent With High Visibility 10Mmx94x135cm 2584 Medcon1236 Wound Drainage - Small 2585 Medcon1237 Wound Drainage Large 2586 Medcon1238 Wound Drainage-Medium 2587 Medcon1239 Zebra Super Stiff Guide Wire 0.035 / 150Cm ( Straight )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 122
Delhi View Result →
12.
Health and Family Welfare #9033893 Technical Bid
supply oof Drugs And Medicine Supply , Category : List Of Drug & Medicine , Budesonide 1Ml Respule , Budesonide 200 Mcg. , Diltiazem 2%P/R Gel , Enterogermina 2Billion Spores 5Mlrespule , Esmoprazole 10Mg Granules , Estradiolvalerate Cream , Fluticasone , Formeterol 20Mcg +Budesonide 0.5Mg Respule , Formeterol 6Mcg.+ Fluticasone 250 Mcg. Inhalation , Formoterol 6 Mcg. + Budesonide 200 Mcg. , Formoterol 6 Mcg. + Budesonide 400 Mcg. , Glycopyrronium 25Mcg. Inhalation 2Ml. Respule , Leosalbutamol 50Mcg.+ Ipratopium 40Mcg. , Levosalbutamol 2.5 Mg +Ipratropium 500 Mcg 2.5 Ml Respule , Minoxidil 2%Lotion , Multi Vitamin Syrup , Nifedipine + Lidocaine P/R Gel , Povidone Iodine Gargle , Sodium Chloride 0.9% 3000Ml(N.S) , Sodium Chloride 3 % Respule , Sodium Chloride Bottel 100Ml , Syrup L-Carnitine 500Mg/5Ml In 30 Ml , Tiotropium + Glycopyrolate 25Mg , Tiotropium Bromide Dry Powder30/Pack Respule , (Medium Chain Triglyceride) Oil , /Susp. Azithromycin Oral Suspension 100Mg/5Ml , /Susp. Azithromycin Oral Suspension 200Mg/5Ml , 1.5% Hydrogen Peroxide Mouthwash , 3Rd Generation Recombinant F Viii250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , Aceclofenac And Paracetamol Tablet 100 Mg + 325 Mg , Acenocoumarol Tablet 2 Mg , Acetazolamide Tablet 250 Mg , Act Kit Containing 3 Tablet Of Artesunate (100 Mg Each) And 1 Tablet Of Sulphadoxine Pyremethamine (750 + 37.5) Mg , Act Kit Containing 3 Tablet Of Artesunate (50Mg Each) And 1Tablet Of Sulphadoxine Pyremethamine (500+25) Mg , Act Kit Containing 3 Tablet Of Artesunate (Each 200 Mg) And 2 Tablet Of Sulphadoxine Pyremethamine (750 + 37.5) Mg Each Or 3 Tablet Sulphadoxine Pyremethamine (500+25) Mg Each , Act Kit Containing 3 Tablet Of Artesunate (Each Tablet Of Artesunate 25Mg Strength) And 1 Tablet Of Sulphadoxine Pyremethamine (250 Mg+ 12.5 Mg) , Act Kit Containing 3 Tablet Of Artesunate 150 Mgand 2 Tablet Of Sulphadoxine Pyremethamine (500 Mg+ 25 Mg) , Acyclovir Cream 5% , Acyclovir Eye Ointment Ip 3% W/W 5Gm Size , Acyclovir Injection250 Mg , Acyclovir Injection500 Mg , Acyclovir Suspension400 Mg/ 5Ml , Acyclovir Tablet200 Mg , Acyclovir Tablet 800 Mg , Adenosine Injection6 Mg/2Ml , Adrenaline Injection 1 Mg/Ml , Albendazole Oral Suspension 400 Mg/ 10 Ml , Albendazole Tablet Ip 400 Mg , Alendronate Sodium Tablets Usp/Bp 35 Mg , Allopurinol Tablet 100 Mg , Alpha Interferon Injection 3 Million Unit , Alprazolam Tablet 0.25 Mg , Alprazolam Tablet 0.5 Mg , Amikacininjection100 Mg , Amikacininjection 500 Mg , Amikacin Injection250 Mg , Aminophylline Injection25 Mg/Ml , Amiodaronetablet 100 Mg , Amiodaronetablet 200 Mg , Amiodarone Hydrochloride Injection 50 Mg/Ml , Amitriptyline Tablets Ip 25 Mg , Amlodipine And Atenolol Tablet 5 Mg +50 Mg , Amlodipine And Enalapril Maleate Tablet 5 Mg +5Mg , Amlodipine And Lisinopril Tablet 5Mg +5 Mg , Amlodipine Tabletip 2.5 Mg , Amlodipine Tablet 5 Mg , Amoxicillin And Clavulanic Acid Injection 600 Mg , Amoxicillin And Potassium Clavulanate Injection1.2 Gm , Amoxycillin& Clavulanic Acid Syrup 200 Mg + 28.5 Mg / 5 Ml , Amoxycillin And Cloxacillin Capsule 250 Mg + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs 500 Mg + 125 Mg , Amoxycillin Capsule 250 Mg , Amoxycillin Capsule 500 Mg , Amoxycillin Oral Suspension (Dry Syrup) 125 Mg/5Ml , Amoxycillin Trihydrate Dispersible Tablet 125 Mg , Amphotericin B Injection 50 Mg , Ampicillin Capsule 500 Mg , Ampicillin Injection Ip 500 Mg , Antacidliquid , Antacid Tablet , Anti A Blood Grouping Serum (Anti A Monoclonal Serum Ip) , Anti B Blood Grouping Serum , Anti Drh Blood Grouping Serum , Anti- Inhibitor Coagulation Complex[Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial 500 Iu] , Anticold Syrup: Phenylephrine Hcl , Chlorpheniramine Maleate, And Paracetamol 2.5 Mg+ 1 Mg+125 Mg/5Ml , Artemether + Leumefantrine Tablet (40 Mg And 240 Mg) , Artemether + Leumefantrine Tablet (80 Mg And 480 Mg) , Artificial Saliva Solution , Artisunate Injection 60 Mg (Combo Pack With 1 Ml Ampoule Of 5% Sodium Bicarbonate Injection And 5 Ml Ampoule Of 0.9% Sodium Chloride Injection) , Asceptic ( Chlorhexadine Gluconate 7.5% +=15%Cetrimide Solu + Isopropyl17%Lotion , Ascorbic Acid Tablet 500 Mg , Aspirintablet Ip (Gastro-Resistant) 150 Mg , Aspirin Delayed Release Tablet(Enteric Coated) 75 Mg , Atenolol Tablet 25 Mg , Atenolol Tablet 50 Mg , Atorvastatin Tablet 10 Mg , Atorvastatin Tablet 40 Mg , Atracurium Injection 10 Mg/Ml , Atropine Eye Ointment 1% , Atropine Sulphate Injection0.6 Mg/Ml , Atropine Sulphate Ophthalmic Solution Usp 1% , Azathioprine Tablet Ip 50 Mg , Azithromycin 1% Eye Ointment , Azithromycin Tablet (Dt) 100 Mg , Azithromycin Tablet 500 Mg , Azithromycin Tablet Ip 250 Mg , Aztreonam 1Gm Injection , Aztreonam Injection 500 Mg , Balanced Salt Calcium Free 1000 Ml [Solution], Non Pvc Polyolefin Sterile Free Flex Bag , Beclomethasone Inhalation 200 Mcg/ Dose , Beclomethasone, Neomycin And Clotrimazole Cream 0.025% + 0.5% + 1% , Benzathine Benzylpenicillin Injection 6 Lac Units , Benzathine Benzylpenicillin Injection Ip12 Lac Units , Betahistine Tabletip 8 Mg , Betahistine Tablet Ip 16 Mg , Betamethasone Dipropionate Cream 0.05% , Betamethasone Lotion0.05% , Betamethasone Sodiumphosphate Injection 4 Mg/Ml , Betamethasone Tablet 0.5 Mg , Betaxolol Eye Drops 0.50% , Biphasic Isophane Insulin Injection30 / 70 (30% Soluble Insulin &70% Isophane Insulin) 40 Iu / Ml , Bisacodyl Tablet 5 Mg , Black Disinfectant Fluid (Phenyl) (As Per Schedule O Grade - Iii , Bleomycin Injection15 Units , Brimonidine Tartrate And Timolol Eye Drops0.15% + 0.5% , Bromocriptine Mesylate Tablet2.5 Mg , Budesonide 0.5Mg/Ml Respule , Budesonide 400 Mcg , Budesonide Nebulizer Suspension0.25 Mg/Ml , Budesonide Rotacap 200 Mcg , Bupivacaine Hydrochloride In Dextrose Injection5mg + 80 Mg Per Ml , Bupivacaine Injection 0.50% , Caffiene Citrate Oral Solution , Calamine Lotion Ip , Calcitriol Capsule0.25 Mcg , Calcium& Vitamin D3 Tablet 500 Mg + 250 Iu , Calcium & Vitamin D3 Suspension(Each 5 Ml Contains Calcium Carbonate Equivalentvto Elemental Calcium 250 Mg + Vitamin D3 -125 Iu) , Calcium Gluconate Injection 10% , Cap Thalidomide Usp 100 Mg(Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg) , Cap. Acitretin 10 Mg , Cap. Acitretin 25 Mg , Cap. Alectinib 150 Mg (Monopoly) , Cap. All Trans Retinoic Acid 10 Mg , Cap. Alpha+Lipoic Acid + Leycopen +Multivitamin And Miltiminerals , Cap. Anti-Oxidants (Beta Carotene-10 Mg,Vit-E 25Mg,Vit-C 100 Mg,Copper 1.5 Mg,Managanese 1.5 Mg,Zinc 7.5 Mg,Selenium 150 Microgram) , Cap. Aprepitant 125 Mg , Cap. Budesonide 9 Mg , Cap. Calcium Dobesilate 500Mg , Cap. Ceritinib 100 Mg , Cap. Ceritinib 200 Mg , Cap. Ceritinib 250Mg , Cap. Ceritinib 50 Mg , Cap. Clomipramineip 25 Mg , Cap. Cyclosporine 100 Mg , Cap. D Penicillamine 250Mg , Cap. Danazol 100Mg , Cap. Eveningprimosa 1000 Mg , Cap. Glucosamine + Hydrochloride +Methylsulfonylmethane , Cap. Indacaterol Andglycopyronium Inhalation Powder110/50 Mcg , Cap. Isotretinoin 10Mg , Cap. Isotretinoin 20 Mg , Cap. Lomustine 40 Mg , Cap. L-Ornithine L-Aspartate (150Mg) + Pancreatin (100Mg) , Cap. Minocycline 100Mg. , Cap. Mycophenolate Mofetil 500Mg , Cap. Netupitant + Palonosetron 300 Mg + 0.5 Mg , Cap. Rabeprazole +Levosulpiride , Cap. Racecadotril 100Mg , Cap. Ramiprilip 5 Mg , Cap. Rucaparib300 Mg , Cap. Rucaparib 200 Mg , Cap. Silodosin 4 Mg , Cap. Silodosin 8 Mg , Cap. Temozolamide 250 Mg , Cap. Trametinib 0.5Mg + Davarafenide 150Mg (Monopoly) , Cap. Vitamin A 25000 Iu , Cap. Vitamin E 400 Mg , Capsuleprocarbazine Hydrochloride Usp 50 Mg (Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg) , Capsule Lomustine Ip 40 Mg(Each Capsule Contains Lomustine Ip 40 Mg) , Capsule Mycophenolate Mofetil Usp 250 Mg (Each Capsule Conatin Mycophenolate Mofetil Usp 250 Mg) , Capsule Tacrolimus Ip 0.5 Mg (Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg) , Capsule Temozolomide Ip 100 Mg (Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg) , Carbamazepinetablet 200 Mg , Carbamazepinetablet Ip 100 Mg , Carbamazepine Oral Suspension Usp 100 Mg/5 Ml , Carbimazole Tablet 5 Mg , Carboplatin Injection 150Mg , Carboplatin Injection 450Mg , Carboprosttromethamine Injection0.25 Mg/Ml , Carboxymethylcellulose Sodium Lubricant Eyedrops 0.50% , Cefepime Injection500 Mg , Cefixime Oral Susp (Drops) 25 Mg/Ml , Cefixime Tablet 100 Mg , Cefixime Tablet 200 Mg , Cefoperazone And Sulbactum For Injection1 G + 0.5 G , Cefotaxime Injection1 G , Cefotaxime Injection 250 Mg , Cefpodoxime Dispersible Tablet 50 Mg , Ceftazidime Injection 1 G , Ceftazidime Injection 250 Mg , Ceftazidime Injection 500 Mg , Ceftriaxone Injection 250 Mg , Ceftriaxone Injection Ip 1 G/Vial , Ceftriaxone Injection Ip 500 Mg/Vial , Cefuroxime Tablet 250 Mg , Cephalexin Capsule 250 Mg , Cephalexin Capsule Ip 500 Mg , Cephalexin Oral Suspension ( Cephalexin Dry Syrup) 125 Mg/ 5Ml , Cephalexin Tablet (Dt) 125 Mg , Cetirizine Syrup 5 Mg/Ml , Cetirizine,Phenylephrine& Paracetamol Tablet 5 Mg + 10 Mg + 325 Mg , Cetrimide Cream Ip 0.50% , Chlorambucil Tablet 5 Mg , Chloramphenicol0.5% Eye Ointment , Chloramphenicol +Polymycin Eye Ointment , Chloramphenicol +Polymycine + Dexamethasone Eye Ointment , Chloramphenicol 1% W/W Eye Ointment Ip, 3Gm Size , Chloramphenicol Eye Drops 0.05% , Chlorhexidine Gluconate Solution 5% , Chlorhexidine Mouthwash Bp 0.20% , Chloridazepoxide Tablets Ip 10 Mg , Chloroquine Phosphate Injection 40 Mg/Ml , Chloroquine Phosphate Suspension 50 Mg/ 5Ml , Chloroquine Phosphate Tablet 250Mg (=155 Mg Of Chloroquine Base) , Chlorpheniramine Maleate Tablet 4 Mg , Chlorpromazineinjection Ip 25 Mg/Ml , Chlorpromazinetabletsip 100 Mg , Chlorpromazinetablets Ip50 Mg , Chlorpromazinetablets Ip 25 Mg , Chlorzoxazone,Diclofenac Sodium& Paracetamoltablet 250Mg+50Mg+325 Mg , Cholecalciferol Granules 60,000 Iu /1Gm , Cinnarizine Tablet Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , Ciprofloxacin And Dexamethasoneear Drops 0.3% + 0.1% , Ciprofloxacin Eye Drops0.30% , Ciprofloxacin Injection 200 Mg/ 100 Ml , Ciprofloxacin Ophthalmic Ointment 0.30% , Ciprofloxacin Tablet 250 Mg , Ciprofloxacin Tablet 500 Mg , Cisplatin Injection 10 Mg/10 Ml , Cisplatin Injection 50 Mg/ 50 Ml , Clindamycincapsule 150 Mg , Clindamycin Capsule 300 Mg , Clindamycin Phosphate Gel Usp 1% , Clobazam Tablet/Capsule 10 Mg , Clobazam Tablet/Capsule 5 Mg , Clobetasol Cream 0.05% , Clobetasol+Salicylic Acid 0.5%+6% , Clomiphene Tablet 50 Mg , Clomiphene Tablet Ip 25 Mg , Clonazepam Tablet 0.5 Mg , Clopidogrel And Aspirin Tablet 75 Mg +75 Mg , Clopidogrel Tablet Ip 75 Mg , Clotrimazole 1% With Beclomethasone Dipropionate 0.025% Ear Drops , Clotrimazole 1%+Beclomethasone 0.25% Lotion , Clotrimazole 10Mg Lozenses , Clotrimazole Cream Ip 2% W/W , Clotrimazole Mouth Paint (Clotrimazole 1% W/V) 1% , Clotrimazole Vaginal Tablet 500 Mg , Cloxacillin Sodium Injection 500 Mg , Coal Tar 6% & Salicylic Acid 3% Onitment , Coloplast60 Gm Paste , Compoundbenzoin Tinctureip , Compound Benzoic Acid Ointment Ip Benzoic Acid 6%+ Salicylic Acid 3% , Compound Sodium Lactate Injection , Concentrated Solution For Haemodialysis B.P Acetate Concentrate In 10 Litre Cans , Conjugated Estrogen Tablet 0.625 Mg , Continuous Ambulatory Peritoneal Dialysis Fluid 2 Ltr , Co-Trimoxazoleoral Suspension 40 Mg + 200 Mg Per 5Ml , Co-Trimoxazole Tablet160 Mg + 800 Mg , Co-Trimoxazole Tablet40 Mg + 200 Mg , Cough Syrup [Each 5Ml Contains Chlorpheniramine Maleate Ip 3Mg Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg] , Cough Syrup/ Expectorant(Ambroxol Hydrochloride Ip 15 Mg, Terbutaline Sulphate Ip 1.5 Mg, Guaiphenesin Ip 50 Mg, Menthol Ip 1 Mg , Creamlidocaine 25 Mg + Prilocaine25mg , Cream /Ointment(Modified Lanolin) , Cream Aloe Vera Moisturizing , Cream Amophous Hydrogel With Colloid Silver Wound Dressing , Cream Amorolfine 0.25% , Cream Azelaic Acid 20% , Cream Benzoyl Peroxide 2.5 % , Cream Desonide0.05% , Cream Fenticonazole 2% , Cream Glycolic Acid 6% , Cream Hydrocortisone 1% , Cream Hydroquinone 2% , Cream Kojic Acid 2%, Arbutin,Niacinamide , Cream Luliconazole 1% , Cream Mometasone 0.1 % , Cream Mometasone 2% , Cream Mupirocin Usp 2% (Each Gram Contains 21.5 Mgmupirocin Calcium Usp In A Mineral Oil Cream Base) 15 Gm Size , Cream Permethrin 1%Rinse , Creamneomycin Sulphate Cream , Cyclophosphamide Injection200 Mg , Cyclophosphamide Injection Ip 500 Mg , Cyclosporine Capsule Usp 50 Mg , Cytarabineinjection100 Mg/5 Ml , Dacarbazine Injection 500 Mg , Danazol Capsule Ip 50 Mg , Daunorubicininjection 20 Mg , Deferasirox Tablet100 Mg , Deferasirox Tablet 500 Mg , Deferiprone Capsule 250 Mg , Deferiprone Capsule 500 Mg , Dental Gel: Choline Salicylate + Benzalkonium + Lignocaine 8.75% , Desensitizing Tooth Gel With Sodium Mono Fluoro Phosphate & Pot. Nitrate 0.7%+ 5 % , Desferrioxamine Injection (For I.M. Inj And I.V., S.C. Infusion) 500 Mg , Dexamethasoneinjection 8 Mg/2Ml , Dexamethasone Tablet 0.5 Mg , Dextromethorphan Hydrobromide Syrup 13.5 Mg/ 5Ml , Dextrose Injection25% , Dextrose Injection 10% , Dextrose Injection 5% , Diagnostic Sticks For Multiple Use Strip (Sugar, Ketone, Albumin) , Diagnostic Stip For Sugar, Ketone , Diagnostic Stip For Sugar, Protein , Diatrizoate Meglumine And Diatrizoate Sodium Inj Usp60% (Iodine Conc.292 Mg/Ml) 60% , Diatrizoate Meglumine And Diatrizoate Sodium Inj Usp 76%W/V (Iodine Conc.370 Mg/Ml)76% , Diazepam Injection10 Mg/ 2Ml , Diazepam Tablet 5 Mg , Diclofenac Each Transdermal Patch Contain 200 Mg Diclofenac , Diclofenac Gel: Diclofenac Diethylamine , Methyl Salicylate , Linseed Oil And Menthol 1.16%+10%+3%+ 5% , Diclofenac Sodium And Paracetamol Tablet 50 + 325 Mg , Diclofenac Sodium Injection - For Im And Iv 25 Mg/Ml , Diclofenac Sodium Tablet 50 Mg , Diclofenac Tablet (Sr) 100 Mg , Dicyclomineinjection 10 Mg/Ml , Dicyclominetablet 10 Mg , Dicyclomine And Paracetamol Tablet 20Mg + 325Mg , Dicyclomine Hydrochloride And Activated Dimethicone Suspension 10Mg + 40Mg Per Ml , Dicyclomine Hydrochloride Oral Solution Ip10 Mg/5Ml , Diethylcarbamazine Tablets Ip 100 Mg , Digoxin 0.25% Elixir , Digoxin Injection 0.25 Mg/Ml , Digoxin Tablet 0.25 Mg , Diltiazem Tablet 30 Mg , Dinoprostone Cream0.5 Mg , Diphtheria Antitoxin 10,000 Iu , Dobutamineinjection 50 Mg/Ml , Domperidone Oral Drops 10 Mg/ Ml , Domperidone Suspension 5 Mg/ 5Ml , Domperidone Tablet 10 Mg , Dopamine Hydrochloride Injection40 Mg/Ml , Doxorubicin Injection50 Mg/ 25 Ml , Doxycycline Capsule 100 Mg , Dried Factor Viii Fraction (Iv Use) 1000 Iu , Dried Factor Viii Fraction (Iv Use) 250 Iu , Dried Factor Viii Fraction (Iv Use) 500 Iu , Dropdiastasepepsin With Simethicone 15 Ml , Drop Ambroxol , Drop Anticold , Drop Astyminec (Vitamin C+ Essential Amino Acid) , Drop Cefpodoxime Oral Suspension 20Mg/Ml , Drop Docosahexaenoic 30Ml , Drop Enzyme , Drop Furosemide 10Mg/Ml , Drop Hydroxyzine Oral Solution 15 Ml , Drop Iron (Ferrous Ascorbate) , Drop Ondansetron Oral Solution 30 Ml , Drop Simethicon 40Mg+Dill Oil 0.005Ml + Fennel Oil 0.0007Ml30 Ml , Drop Terbutalin , Drop Vitamin – E50mg/Ml, 400 Iu , Drop Vitamin D3 400Iu/Ml , Drop Vitamin D3 800Iu/Ml , Drotaverine & Mefenamic Acidtablet 80 Mg + 250 Mg , Drotaverine Hydrochloride Injection 40 Mg/2Ml , Drotaverine Tablet 40 Mg , Ear Dropacetic Acid Otic Solution 2% , Ear Dropgentamycin , Eeg 400Gm Paste , Enalapril Maleate Tablet 10 Mg , Enalapril Maleate Tablet 2.5 Mg , Enalapril Maleate Tablet 5 Mg , Enema Lactulose , Enoxaparin Sodium Injection 60 Mg , Escitalopram Tablets Ip10 Mg , Ethamsylate Injection 250 Mg/ 2Ml , Ethinyloestradiol Tablet Ip 50 Mcg , Etoposide Injection 100 Mg/ 5 Ml , Etoricoxib Tablet 90 Mg , Etoricoxib Tablet Ip 120 Mg , Eye Drop Carboxymethylcellulose + Glycerin , Eye Drop Moxifloxacin+ Difluoprednate , Eye Drop Natamycin Opthalmic Suspension 5% , Eye Drop Olaptadine & Ketorolac , Eye Drop Polymyxin B 10000Iu/Gm + Neomycin 3400Iu/Gm , Eye Dropbetadin 5% , Eye Dropbrinozolamide+Brimonidine , Eye Dropcpm+Cmc+Nephazoline , Eye Dropcyclopentolate 1% , Eye Dropdorzolamide 2% , Eye Dropfluromethalone 0.1% , Eye Dropgatifloxacin+Prednisolone , Eye Drophpmc 0.3% , Eye Dropitraconazole 1% , Eye Droploteprednol 0.25% , Eye Dropmoxifloxacin 0.5%+Ketorolac Tromethamine 0.5% , Eye Dropmoxifloxacin And Dexamethasone , Eye Dropmoxifloxacin And Prednisolone , Eye Dropnepafenac 0.1% , Eye Dropoloptadine Opthalmic Solution0.1% , Eye Droppilocarpine , Eye Dropprednisolone Acetate Opthalmic Suspension 10 Ml , Eye Dropproparacaine 0.5% W/V , Eye Dropsodium Chloride 5 % , Eye Dropsulfacetamide 20% , Eye Droptravapost+Timolol , Eye Droptropicamide+Phenylepherine , Eye Dropvoriconazole , Eye Drop Gatifloxacin 0.3% , Eye Drop Moxifloxacin0.5% W/V Ophthalmic Solutionip 5Ml Size , Factor – Ix Concentrate 600 Iu , Fenofibrate Capsule 200 Mg , Fentanyl 25Iu Patch , Fentanyl 50Iu Patch , Fentanyl Citrate Injection50 Mcg/Ml , Fentanyl Citrate Injection50 Mcg/Ml , Feracrylum 1% W/W Sterile Solution 100 Ml , Ferrous Sulphate And Folic Acid Tablet 100 Mg + 0.5 Mg , Ferrous Sulphate With Folic Acid Tab.(Paediatric) 20 Mg + 0.1 Mg , Filgrastim Injection 300Mcg/Ml , Finasteride Tablet 5 Mg , Flavoxate Tablet 200 Mg , Fluconazole Eye Drops0.3% , Fluconazole Tablet 150 Mg , Flunarizine Tablet 5 Mg , Fluorouracil Injection 250 Mg/ 5 Ml , Fluoxetine Capsule Ip 20 Mg , Flurbiprofen Sodium Ophthalmic Solution 0.03% , Fluticasone Ft Nasal Spray , Folic Acidtablet Ip 5 Mg , Formaldehyde Solution (34.5% - 38%) , Formetrol 12Mcg + Budesonide 400 Mcg. , Formoterol & Budesoniderotacap 6 Mcg+ 200 Mcg , Fosfomycin3gm , Framycetin Sulphate Cream 1% , Framycetin Sulphate Cream 1% , Furosemide Injection 10 Mg/Ml , Furosemide Tablet 40 Mg , Fusidic Acid Cream2% , Gabapentine Tablet/Capsule 100 Mg , Gabapentine Tablet/Capsule 300 Mg , Gadodiamide Injection0.5 Mmol/Ml , Gamma Benzene Hexachloride Lotion(Lindane Lotion Usp) 1% , Ganciclovir 0.15% Eye Ointment , Gel Adaplene (0.1% W/W) , Gemcitabine Injection 1Gm , Gemcitabine Injection 200 Mg , Gentamycin Injection 80 Mg/2Ml , Gentian Violet Topical Solution Usp 1% , Glibenclamide And Metformin Hydrochloride (Sr) Tablet 5 Mg + 500 Mg , Glibenclamide Tablet 5 Mg , Gliclazideand Metformin Tablet 80 Mg + 500 Mg , Gliclazide Tablets Ip 40 Mg , Glimepiride Tablet 1 Mg , Glimepiride Tablet 2 Mg , Glimepiride, Pioglitazone And Metformin Hydrochloride (Sr) Tablet2mg + 15Mg + 500Mg , Glipizide And Metformin Hydrochloride Tablet 5 Mg + 500 Mg , Glipizide Tablet Ip 5 Mg , Glucagon Injection Usp 1 Mg/Ml , Glutaraldehyde Solution 2% , Glycerin2 Gm/Ml , Glycerin Ip 100 Ml , Glycerin Ip 400 Gm , Glyceryl Trinitrate Tablet 2.6 Mg , Glycopyrrolate Injection 0.2 Mg/Ml , Glycopyrronium 25 , Glycopyrronium 25 + Formoterol 6 Mcg , Glycopyrronium 50 , Griseofulvin Tablets 125 Mg , Gum Paint Containing Tannic Acid , Cetrimide , Zinc Chloride 2%+0.1%+1% , Haloperidol Injection 5 Mg/Ml , Haloperidol Tablet5 Mg , Haloperidol Tablet 1.5 Mg , Halothane , Hameodialysis Bicarbonate Solution , Heparin 50 Iu Benzyl Nicotinate 2 Mg , Heparin Sodium Injection 5000 Iu/Ml , Hmffor Pretem , Homatropine Eye Drops 2% , Hormonalintra Uterine Device , Humanalbumin Solution 20% , Human Anti D Immunoglobulin 150 Mcg , Human Anti D Immunoglobulin Injection (Im Use) 300 Mcg , Human Rabies Immunoglobulin Injection 150 Iu/Ml , Hyaluronidase Injection 1500 Iu , Hydrochlorthiazide Tablet 12.5 Mg , Hydrochlorthiazide Tablet 25 Mg , Hydrocortisone Sodium Succinate Injection 100 Mg Base / Vial , Hydrogen Peroxide Solution 6% , Hydroxychloroquine Sulphatetablet 200 Mg , Hydroxyethyl Starch (130/4) 6% W/Vwith Sodium Chloride 0.9% W/V Intravenous Infusion , Hydroxyprogesterone Injection 250 Mg/Ml , Hydroxypropylmethyl Cellulose Solutionwith Prefilled Glass Syringe With Cannula20 Mg/Ml , Hydroxyzine Tablet 25 Mg , Hyoscine Butylbromide Injection Ip 20 Mg/Ml , Hyoscine Butylbromide Tablet 10 Mg , Ibuprofen And Paracetamol Tablet 400 Mg + 325 Mg , Ibuprofen Oral Suspension 100 Mg/5Ml , Ibuprofen Tablet 200 Mg , Ibuprofen Tablet 400 Mg , Ifosfamide Injection 1Gm , Imatinib Tablet 400 Mg , Imipramine Tablet 25 Mg , Imipramine Tablet 75 Mg , Indomethacin Capsule 25 Mg , Injbendamustine 100 Mg , Injclindamycin Phosphate Ip 300 Mg , Injimipenem + Cilastatin 500Mg/500Mg Ip Powder For Solution , Inj Colistimethate Ip 1M Iu Powder For Solution , Inj Diclofenac Sodium Aqueous 75Mg/Ml1ml Size, Iv & Im Use , Inj Human Chorionic Gonadotropin Ip 5000 I.U. , Inj Meropenem Ip 250 Mg , Inj Piperacillin 2 Gm + Tazobactom 250Mg Usp , Inj Poractant Alpha 80 Mg/Ml In Pack Of 1.5 Ml , Inj Prochlorperazine Mesylate 12.5Mg/Ml 5Ml Size , Inj Tranexamic Acid Ip 100Mg/Ml 5Ml Size , Inj Zoledronic Acid Ip 4Mg/100Ml 100Ml Size , Inj.Docetaxel 20Mg , Inj.Docetaxel 80 Mg , Inj.Etanercept 25Mg/0.5Ml , Inj.Folinic Acid 200Mg/Vial , Inj.Sodium Chloride 3% 100Ml , Inj. Acth Synacthen 250 Mcg , Inj. Adalimumab - 40 Mg , Inj. Ado- Trastuzumab 100 Mg , Inj. Ado- Trastuzumab 160 Mg , Inj. Alpha Beta Arteether 2 Ml , Inj. Amino Acid 10% 100Ml Size , Inj. Aminocaproicacid 20Ml , Inj. Amoxycillin & Clavulanic Acid 300 Mg , Inj. Ampicillin + Salbactum 1.5G , Inj. Artesunate 120 Mg , Inj. Atezolizumab 1200 Mg(Monopoly) , Inj. Avelumab 200 Mg (Monopoly) , Inj. Azacitidine 100Mg , Inj. Azacitidine 50Mg , Inj. Azithromycin 10 Ml Vial Equaivelent To 500 Mg , Inj. Bacitracin For Injection 25,000 Iu , Inj. Bevacizumab 100 Mg , Inj. Bevacizumab 400 Mg , Inj. Bortezomib 2.5 , Inj. Bortezomib 2Mg , Inj. Botulinum Toxin Type A For Injection/Botulinum Toxin Type B For Injection100 Iu , Inj. Botulinum Toxin Type A For Injection/Botulinum Toxin Type B For Injection50 Iu , Inj. Busulfan 60Mg/1Ml , Inj. Butorphanol Tartrate Usp 1Mg/Ml 1Ml Size , Inj. Cabazitaxel 20 Mg , Inj. Cabazitaxel 40 Mg , Inj. Caffeine Cirate 20Mg/Ml , Inj. Caffeine Citrate Usp 20Mg/Ml(Equivalent To 10 Mgcaffeine Base/Ml) 3Ml Size , Inj. Calcium Chloride 5Ml Vial , Inj. Calcium Gluconate/Folinate , Inj. Carbetocin 1Ml/100Micro. , Inj. Carfilzomib 20 Mg , Inj. Carfilzomib 60 Mg , Inj. Carmustine 100 Mg , Inj. Caspofungin 50 Mg , Inj. Caspofungin 70 Mg , Inj. Cefipime 1000Mg + Tazobactum 125Mg , Inj. Cefoperazone 1Gm+Tazobactum 125Mg , Inj. Cefoperazone 1Mg Inj. , Inj. Cefoperazone 500Mg , Inj. Ceftazidime 1Gm+Sulbactam500 Mg , Inj. Ceftazidime+ Avibactum 2Gm+500Mg , Inj. Ceftizoxime 1 Gm , Inj. Ceftriaxoneip 125 Mg , Inj. Ceftriaxone +Salbactum+ Disodium Edta , Inj. Ceftriaxone 1 Gm + Tazobactum 1.25 Gm , Inj. Ceftriaxone And Sulbactam 1.5G , Inj. Ceftriaxone1000mg+ Tazobactom125mg , Inj. Cefuroxime 1Gm , Inj. Cetrorelix Acetate 0.25 Mg , Inj. Cetuximab 100 Mg , Inj. Cetuximab 500Mg , Inj. Chloramphenicol 1Gm/Vial , Inj. Cis Atracurium Besylate 2 Mg/Ml In 5 Ml Vial , Inj. Cladrabine 10 Mg , Inj. Clarithromycin 500Mg , Inj. Clindamycin600mg/4Ml , Inj. Clonidine 150Mcg/Ml , Inj. Compound Sodium Lactate (Ringer Lactate) In Glass Bottle 500Ml , Inj. Crystilline Penicillin 2 Lakh , Inj. Cytarabine 1000 Mg , Inj. Dacarbazine 200 Mg , Inj. Daratumumab 100 Mg (Monopoly) , Inj. Daratumumab400 Mg(Monopoly) , Inj. Darbepoietin Alfa 100Mcg , Inj. Darbepoietin Alfa 200 Mcg , Inj. Darbepoietin Alfa 500Mcg , Inj. Decitabine 100 Mg , Inj. Decitabine 50 Mg , Inj. Degarelix 120 Mg , Inj. Degarelix 80 Mg , Inj. Degludec Insulin 300Iu/3Ml , Inj. Denosumab 120 Mg , Inj. Deriphylline 1 Ampul , Inj. Detemir Insuline , Inj. Dexmedetomidine 100Mcg/Ml , Inj. Dextran 40 , Inj. Dextrose 5% 500 Mlglass Bottle , Inj. Diazoxide 300 Mg/20Ml , Inj. Digoxin 2Mg , Inj. Diltiazem 25 Mg , Inj. Distilled Water 10Ml , Inj. Docetaxel 120 Mg , Inj. Doxycycline For Injection 100 Mg , Inj. Durvalumab 120 Mg (Monopoly) , Inj. Durvalumab 500Mg (Monopoly) , Inj. Enalapril1.25 Mg 1 Ml , Inj. Ephedrine 30 Mg/Ml , Inj. Epirubicin 150Mg/Ml , Inj. Epirubicin 50Mg/Ml , Inj. Eribulin 0.5Mg , Inj. Eribulin 1 Mg , Inj. Ertapenem Sodium 1Gm = Ertapenem 1.046 Gm , Inj. Esmolol Hydrochloride 10Mg/Ml 10Ml Size , Inj. Etomidate 20 Mg , Inj. Etomidate Mct/Lct 10Ml Vial , Inj. Ferric Carboxymaltose 50 Mg/Ml 10 Ml Size , Inj. Fluconazole 100Mg , Inj. Fluconazole 200 Mg , Inj. Fludarabine Phosphate Injection 50Mg , Inj. Fluorescien Sodium Ip 20% Vail 3 Ml For Diagnostic Fundus Fluorescien Angiography , Inj. Fluphenazine Deconate Injection (Long Acting) 25Mg/Ml Ampule , Inj. Folic Acid +Methylcobalamine 10 Ml Pack , Inj. Fondaparinux 2.5Mg , Inj. Fosphenytoin Sodium 150Mg/Ml , Inj. Fsh 150 Iu , Inj. Fsh 75 Iu , Inj. Fulvestrant 250Mg , Inj. Ganciclovir Sodium 500Mg (Lyophilized Powder Forreconstitution) , Inj. Gdw 5% Glass Bottle/500Ml , Inj. Glyceryl Trinitrate Injection, Diluted 5Mg/Ml , Inj. Goserelin Acetate Implant 3.6 Mg , Inj. Haemocoagulase1 Ml , Inj. Haloperidol (Long Acting) 50Mg/Ml Ampoule , Inj. Hepatitis B Immunologlobin Ip 100 I.U , Inj. Horse -Atg(Anti Thymocyte Globulin) 250 Mg , Inj. Hp-Hmg (Highly Human Menopausal Parodiedgonadotropin) 150 Iu , Inj. Hp-Hmg (Highly Human Menopausal Parodiedgonadotropin) 75 Iu , Inj. Human Albumin 20% In 50 Ml Vial , Inj. Human Immunologlobin 12%Igm, 12%Iga &76% Igg 10 Ml(0.5 Gm) 100 Mg , Inj. Hydralazine 20Mg/Ml , Inj. Indomethacin Lyophilized Powder 1Mg , Inj. Inotuzumab1 Mg(Monopoly) , Inj. Insulinaspart , Inj. Insulinglulisine(Monocomponent Insulin Glulisine) 100 Iu/Ml/3 Ml Cartridges , Inj. Insulinglulisine (Monocomponent Insulin Glulisine) 100 Iu/Ml/3 Ml Prefilled Pen , Inj. Insulin Glargine300 Iu Per Ml/Prefilled Pen , Inj. Insulin Lispro , Inj. Insuline 50/50 , Inj. Interferon Beta 1-A 30Mg , Inj. Intralipds , Inj. Invert Sugar 10% (Fructodex 10%) 500 Cc , Inj. Iohexol Usp (Solution For Injection) Non Ionic Contrast Medium In Sterile Aqueous Solution, 300 Mg Lodine/Ml Non Ionic 50 Ml , Inj. Ipilimumab 50 Mg , Inj. Irinotecan 100 Mg/5Ml , Inj. Irinotecan 40Mg/5Ml , Inj. Isolyte G , Inj. Isolyte P 10% 500 Ml , Inj. Lacosamide Infusion , Inj. Levobupivacaine 0.5% (20Mg/4Ml) Ampule , Inj. Levofloxacine 500Mg/100 Ml , Inj. Levosulpride 12.5 Mg/Ml , Inj. Lidocaine1% Intra Cameral , Inj. Lignocaine (Preservative Free) 2% , Inj. Lignocaine + Adrenaline (1:10000, 2:10000) , Inj. Lignocaine 10% Spray , Inj. Lignocaine Hydrochloride 2% 50Ml Vial , Inj. Liposomal Doxorubicin 20Mg , Inj. Liposomol Amphotericine B 10 Mg , Inj. Liver Specific Mri Contrast Agent (Gadobenate Disodium (Gd-Bopta), Gadoxetate Disodium (Gd-Eob-Dtpa), Mangafodipirtri Sodium (Mn-Dpdp), Ferumoxide, Ferucarbotran) , Inj. Lorazepam5 Mg , Inj. Lorazepam 1.0 Mg , Inj. L-Orinithine L- Aspartate 10 Ml , Inj. Low Molecular Wt. Heparin 0.4Mg , Inj. Mephentermine 50Mg/Ml , Inj. Meropenem 2Gm , Inj. Mesna 200 Mg/2Ml (Sod. Mercaptoethane Sulphate) , Inj. Methotrexate 1000 Mg , Inj. Methotrexate 250 Mg , Inj. Methylene Blue , Inj. Methylprednisolon Acetate40mg , Inj. Methylprednisolon Acetate 125Mg , Inj. Metoprolol 5Ml Vial , Inj. Metotrexate 15Mg (Preservative Free) , Inj. Midazolam 5Mg/Ml 1 Ml , Inj. Milrinone 10 Mg , Inj. Mitomycin 2 Mg , Inj. Mitomycin 40 Mg , Inj. Mitoxanthrone Infusion 10 Mg , Inj. Mitoxanthrone Infusion 20Mg , Inj. Moxifloxacin Intra Cameral 0.5% , Inj. Moxifloxin 400Mg/100Ml , Inj. Multivitamin 10 Ml , Inj. N Butyl Alcohol 0.26Mg/5Ml, Citric Acid 2.5Mg/5Ml And Sod. Chloride Solution 5 Ml Size , Inj. Nabpaclitaxel (Paclitaxel Nano Particle)100 Mg , Inj. Nandrolone Decanoate 100Mg , Inj. Nandrolone Decanoate 50 Mg , Inj. Natalizumab 300 Mg (Monopoly) , Inj. Neostigmine+ Glycopyrrolate2.5 Mg/ 0.5 Mg , Inj. Netilmycin 300Mg/3Ml , Inj. Nicardipin 10Mg , Inj. Nicorandil 48 Mg , Inj. Nimodipine Infusion 10Mg/50 Ml , Inj. Nimotuzumab 50 Mg , Inj. Nivolumab 100 Mg (Monopoly) , Inj. Nivolumab 40 Mg (Monopoly) , Inj. Normal Saline 1000 Mlglass Bottle , Inj. Normal Saline 500 Mlglass Bottle , Inj. Octreotide 100Mg , Inj. Octreotide-Lar (Long Acting Release) 20 Mg , Inj. Octreotide-Lar (Long Acting Release) 30 Mg , Inj. Omalizumab 150 Mg Vial , Inj. Ornidazole 500Mg , Inj. Palonosetron 0.25Mg , Inj. Paracetamol Infusion 1000 Mg With Both Temper Evident Caps Spray 10% , Inj. Paracetamol Infusion 500 Mg With Both Temper Evident Caps Spray 10% , Inj. Peg Asparaginase 3750 Iu 5 Ml , Inj. Peg Filgrastim Injection 6Mg , Inj. Pembrolizumab 50 Mg (Monopoly) , Inj. Pembrolizumab100 Mg (Monopoly) , Inj. Pemetrexed 100Mg , Inj. Pemetrexed 500 Mg , Inj. Pertuzumab 100 Mg , Inj. Phenylephrine Hydrochloride10 Mg/Ml , Inj. Pilocarpine 0.5% W/V , Inj. Piperacillin 1 Gm + Tazobactum 125 Mg , Inj. Piracetam 200Mg , Inj. Placental Extract 2Ml , Inj. Plerixafor 24 Mg , Inj. Polymixin Sulphate B Usp 5 Lac I.U. , Inj. Potassium Chloride For Injection , Inj. Progesterone Injection 50 , Inj. Prostaglandin 500Mcg/Ml , Inj. Protamine Sulphate 5Ml , Inj. Rabbit-Atg (Anti Thymocyte Globulin) 250 Mg , Inj. Rabbit-Atg (Anti Thymocyte Globulin)100 Mg , Inj. Ramucirumab 100 Mg(Monopoly) , Inj. Ramucirumab 500 Mg (Monopoly) , Inj. Ranizumab 10Mg/Ml , Inj. Rasburicase 1.5 Mg , Inj. Recombinant Fsh 150 Iu , Inj. Recombinant Fsh 300Iu , Inj. Recombinant Hcg 250 Iu , Inj. Recombinant Human Growth Hormone 4Iu Vial With Syringe , Inj. Recombinant Lh 75Iu , Inj. Reteplase 18 Mg , Inj. Risperidone Prolonged Releaseddepot 25 Mg , Inj. Risperidone Prolonged Releaseddepot 50Mg , Inj. Rituximab500 Mg , Inj. Rituximab 100 Mg , Inj. Rocuronium 100Mg/10Ml , Inj. Romiplostim 125 Mcg , Inj. Romiplostim 250 Mcg , Inj. Romiplostim 500 Mcg , Inj. Ropivacaine 0.75% 20Ml Vial , Inj. Ropivacaine 0.75% 3 Ml Ampule (Heavy) , Inj. Secukinumab 150 Mg , Inj. Sildenafil 0.8Mg , Inj. Sodium Bicarbonate Injection , Inj. Sodium Chloride And Dextrose0.45% Infusion 500Ml , Inj. Sodium Fluroresceinedye 20% , Inj. Sodium Hyaluronate 1.4Mg , Inj. Sodium Nitroprusside25mg/Ml2ml Size , Inj. Streptomycin1gm , Inj. Streptomycin500mg , Inj. Sugmadex , Inj. Teicoplanin 200 Mg , Inj. Teicoplanin 400 Mg , Inj. Tenecteplase 20Mg , Inj. Tenecteplase 40 Mg , Inj. Tetanus Vaccine (Adsorbed) Ip In 0.5 Ml , Inj. Thiamine 100Ml , Inj. Ticarcillinand Clavulanic Acid , Inj. Tigecycline For Injection 100Mg , Inj. Tigecycline For Injection 50Mg , Inj. Tobaramycin 80Mg , Inj. Topotecan 2.5 Mg , Inj. Topotecan 4 Mg , Inj. Topotecan1 Mg , Inj. T-Pa 20Mg Alteplase For Injection , Inj. T-Pa 50Mg Alteplase For Injection , Inj. Trabectedin 1 Mg , Inj. Tranexamic Acid 500Mg/5Ml , Inj. Trastuzumab 440 Mg , Inj. Trastuzumab150mg , Inj. Triamcinolone Acetonide 10 Mg Per Ml , Inj. Triamcinolone Acetonide 40 Mg Per Ml , Inj. Triptorelin 0.1 Mg , Inj. Triptorelin 11.25 Mg , Inj. Triptorelin 3.75 Mg , Inj. Trypan Blue 0.6% , Inj. Varicella Immunoglobulin For Iv Use , Inj. Vasopressin 3Ml , Inj. Verapamil2.5 Mg/Ml , Inj. Vinorelbine 10Mg , Inj. Vinorelbine 50Mg , Inj. Vitamin D (600000 Iu) , Inj. Voriconazole200mg/Vial , Inj.Dextrose With Sod.Chloride Polypack 5% 500Ml , Inj.Fludarabine Phosphate Injection 100Mg , Inj.Inj. Liposomal Doxorubicin 50 Mg , Inj.Polymyxin B For Injection 1 Million , Inj.Procaine Penicillin Fortified 2 Lack , Inj.Testosteron Propionate 250Mg , Inj.Testosteron Propionate 50Mg , Insulin Glargine100 Iu/Mlwith 30 Insulin Syringes With Needle , Insulin Glargine 100 Iu/Ml With 15 Insulin Syringes And Needles/Cartridge 100 Iu/Ml With 15 Needles And 1 Pen Per 20 Cartridges , Intravenous Fat Emulsion 20% W/V (Pl/Tg Ratio 0.06) 250Ml , Iohexol ( Non Ionic Contrastmedium In Sterile Aqueous Solution) 300 Mg Iodine/Ml. , Iohexol Usp (Solution For Injection) Non Ionic Contrastmedium In Sterile Aqueous Solution 350 Mg Iodine/Ml. , Ipratropium Bromide Nebulizer Solution 250 Mcg/Ml , Ipratropium Rotacap40 Mcg , Iron And Folic Acid Syrup Each 5 Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100 Mg, Folic Acid 500 Mcg , Iron Sucrose Injection 20 Mg/Ml Usp/Bp 20 Mg/Ml (For Iv Use) Each Ml Contain : Ferric Hydroxide In Comples With Sucrose Equivalent To Elemental Iron 20 Mg , Isoflurane , Isophane Insulin Injection40 Iu / Ml , Isoprenaline Injection 2Mg / Ml , Isosorbide Dinitrate Tablet5 Mg , Isosorbide Mononitrate Tablet 20 Mg , Isoxsuprine Injection 5 Mg/Ml , Isoxsuprine Tablet 20 Mg , Itraconazole 1% Eye Ointment , Itraconazole Capsule 100 Mg , Ketaconazole 2% Lotion , Ketamine Injection 50 Mg/Ml , Ketoconazole Cream 2% , Labetalol Hydrochloride Injection 20 Mg/ 4Ml , Labetalol Tablet 100 Mg , Lactic Acid Bacillus Tablet 60 Million Spores , Lactulose Solution 10Gm/15Ml , L-Arginine+Proanthocynadine Granules 3Mg , L-Asparaginase Injection 10000 Iu , Leflunomide Phosphate Tablet 10 Mg , Leflunomide Phosphate Tablet 20 Mg , Leucovorin Calcium Injection 10 Mg/Ml , Leurprolide Acetate Depot 11.25 Mg , Leurprolide Acetate Depot 3.75 Mg , Levetiracetam Injection 500 Mg/5Ml , Levetiracetam Oral Solution Suspension 100 Mg/Ml , Levetiracetam Tablet 500 Mg , Levoceitrizine Tablet 5Mg , Levodopa And Carbidopa Tablet 100 Mg + 10 Mg , Levodopa And Carbidopa Tablet 250 Mg + 25Mg , Levofloxacin Tablet250 Mg , Levosalbutamol 100Mcg+ Ipratropium Bromide 40Mcg , Levosalbutamol Inhalation Solution 50Ml/Gm , Lidocaine10%20Ml Spray , Lidocaine Hydrochloride Topical Solution Usp 4% , Lignocaineointment 5% , Lignocaine 1% Mouth Paint , Lignocaine 4%30Ml , Lignocaine And Adrenaline Injection 20Mg + 0.01Mg , Lignocaine And Dextrose Injection 50Mg + 75Mg Per Ml , Lignocaine Gelip 2% , Lignocaine Injection 2% , Lignocaine Viscous , Linezolid Injection 200 Mg/100 Ml , Linezolid Tablet Ip 600 Mg , Liquid Paraffin Ip , Liquid Paraffin Ip , Lisinopril Tablet 10 Mg , Lisinopril Tablet 2.5 Mg , Lisinopril Tablet 5 Mg , Lithium Carbonate Tablet 300 Mg , Loperamide Tablet Ip 2 Mg , Lorazepam Injection2 Mg/Ml , Losartan Potassium & Amlodipine Tablet 50 Mg + 5Mg , Losartan Potassium & Hydrochlorothiazide Tablet 50 Mg + 12.5Mg , Losartan Tablet 25 Mg , Losartan Tablet 50 Mg , Lysol(Cresol With Soap Solution) (Cresol 50% + Soap 50%) , Magnesium Sulphate Injection(50% ) 500 Mg/Ml , Magnesium Sulphate, Sulphacetamide, Urea 75 Gm , Mannitolwith Glycerin Injection 10% + 10% , Mannitol Injection 20% , Mecobalamin Injection 500 Mcg/Ml , Medroxyprogesterone Acetate Tablet Ip 10 Mg , Mefenamic Acid Tablet 500 Mg , Mefloquine Tablet250 Mg , Melphalan Tablet 5 Mg , Mercaptopurinetablet Ip 50 Mg , Mercunium Chloride Paint , Meropenem Injection 1 G , Meropenem Injection 500 Mg , Mesalazine , Metformin Hydrochloride (Sr) And Glimepiride Tablet 500 Mg + 1 Mg , Metformin Hydrochloride (Sustained Release) And Glimepiride Tablet500 Mg + 2 Mg , Metformin Hydrochloride Sr Tablet 1000 Mg , Metformin Tablet 500 Mg , Methotrexate Injection 50 Mg/2 Ml , Methotrexate Tablet 2.5 Mg , Methotrexate Tablet Ip 10 Mg , Methyl Prednisolone Sodium Succinate For Injection 500 Mg , Methylcobalmin Tablet 1500 Mcg , Methylcobalmin Tablet 500 Mcg , Methyldopa Tablet 250 Mg , Methylergometrine Injection 0.2 Mg/Ml , Methylergometrine Tablet Ip 0.125 Mg , Metoclopramide Injection 10 Mg/2Ml , Metoclopramide Syrup 5 Mg/ 5Ml , Metoclopramide Tablet 10 Mg , Metoprolol Suscinate Tablet (Extended Release) Usp 50 Mg , Metoprolol Tablet Ip 25 Mg , Metronidazoleinjection 500 Mg/ 100 Ml , Metronidazole And Chlorhexidine Gel 1%+ 0.25% , Metronidazole Benzoate Oral Suspension 100 Mg/ 5 Ml , Metronidazole Tablet 200 Mg , Metronidazole Tablet 400 Mg , Miconazole Nitrate Cream2% , Midazolam 0.5Mg/5Ml Nasal Spray , Midazolam Injection Ip 1 Mg/Ml , Midodrine 5Mg , Mifepristone Tablet200 Mg , Milk Low Birth Formula Powder , Minoxidil 10 % Lotion , Minoxidil 5% Lotion , Misoprostol Tablet 200 Mcg , Mitomycin C Injection 10 Mg , Montelukast 10 Mg + Levocetrizine 5Mg Tablet , Morphine Sulphate Injection Ip 10 Mg/Ml , Moxifloxacin0.5% Eye Ointment , Multiple Electrolytes & Dextrose Injection Type Iip (Electrolyte P Injection ) , Multiple Electrolytes & Dextrose Injection Type Iiiip (Electrolyte M Injection) , Multivitamin Drops Each Ml Contains Vit-A-3000 Iu, Vit D3- 300Iu, Vit-B 1-1Mg, Riboflavine Phosphate Sodium- 2 Mg, D- Pantenol- 2.5 Mg, Niacinamide - 10 Mg, Pyridoxine Hcl - 1 Mg, Cyanocobalamin 1 Mcg, Lysine Hcl 10 Mg , Multivitamin Tablets Nfi Formula Sugar Coated.Vit A 2500 Iu , N- Acetylcystine Injection 200 Mg/Ml , N-Acetylcysteine (Nac) 200Mg/Ml Respule , Naloxone Injection Ip 0.4 Mg/Ml , Naproxen Tablet Ip 250 Mg , Naproxen Tablet Ip 500 Mg , Natural Micronisedprogesteron Soft Gelatin Capsule 200 Mg(Each Soft Gelatin Capsule Containsprogesteron Ip 200 Mg) , Neomycin Sulphate And Bacitracin Zinc Ointment Usp 5 Mg + 500 Iu/Gm , Neomycin, Bacitracin With Sulphacetamide Powder 5Mg + 250Units + 60Mg , Neomycin, Polmyxin And Bacitracin Zinc Ophthalmic 15 Gm Ip , Neomycin, Polymixin B & Hydrocortisone Ear Drops/Otic Solution Usp (Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu And Hydrocortisone 10 Mg Per Ml) , Neostigmine Injection 2.5 Mg/5Ml , Neostigmine Injection Ip 0.5 Mg/Ml , Neostigmine Tablets Ip 15 Mg , Nifedipine Capsule 5 Mg , Nifedipine Tablet (Sustained Release) 10 Mg , Nitrofurantoin Tablet 100 Mg , Nitroglycerininjection 5 Mg/Ml , Noradrenaline Injection 2 Mg/Ml , Norethisterone Tablet 5 Mg , Norfloxacintablet 400 Mg , Normal Human Intravenous Immunoglobulin 5G/100Ml , Octreotide Injection 50 Mcg/Ml , Ofloxacinand Ornidazole Tablet 200 Mg + 500 Mg , Ofloxacin Injection 200Mg / 100 Ml , Ofloxacin Oral Suspension Ip(Each 5Ml Contains Ofloxacin Ip 100 Mg) 30 Ml Size , Ofloxacin Suspension 50 Mg/5 Ml , Ofloxacin Tablet 200 Mg , Oint. Terbinafine 1%W/W (10 Gm Tube) , Ointment Containing : Lidocaine 3%, Zinc Oxide5% , Hydrocortisone0.25%,Allantoin0.5% , Olanzapine Tablet5 Mg , Olopatadine Hydrochloride Ophthalmic Solution 0.1% W/V Usp(E/D) 5Ml Size , Omega 3Fatty Acid 50Ml , Omeprazole Capsule 20 Mg , Ondansetron Injection 2 Mg/Ml , Ondansetron Orally Disintegrating Md Tablet4 Mg , Ors Powder , Oseltamivir 30 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir 45 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir 75 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir Phosphate Oral Suspension Ip 12 Mg/Ml (Each Ml Contains : 12 Mg Oseltamivir After Reconstitution , Oseltamivir Syrup Oseltamivir Phosphate For Oral Suspension 12 Mg/Ml. (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Oxaliplatin Injection 50 Mg , Oxytocin Injection 5 Iu/Ml , Paclitaxel Injection 100 Mg , Paclitaxel Injection 260 Mg , Pantoprazole& Domperidone Sr Capsule 40 Mg+ 30 Mg , Pantoprazole Injection 40 Mg , Paracetamoldrops 150 Mg/Ml , Paracetamolsyrup Ip 125 Mg/5Ml , Paracetamoltablet 500 Mg , Paracetamol 170 Mg Each Suppsitory Contain Paracetamol 170 Mg , Paracetamol Infusion Ip 1% W/V 100Ml Size , Paracetamol Injection 150 Mg/Ml , Pentazocine Injection 30 Mg/Ml , Peritonial Dialysis Solution Ip , Permethrinlotion 5% , Permethrin Cream 5% , Pheniramine Injection 22.75 Mg/Ml , Phenobarbitone Injection Ip 200 Mg/Ml , Phenobarbitone Tablet 30 Mg , Phenylephrine Hydrochloride Ophthalmic Solution Usp/ Phenylephrine Eye Drops Bp 5% , Phenytoin Injection 50 Mg/Ml , Phenytoin Oral Suspension 25 Mg/Ml , Phenytoin Tablet 100 Mg , Pioglitazone Tablet Ip 15 Mg , Piperacillin And Tazobactum For Injection 4 Gm + 500 Mg , Podophyliin Toxin Lotion , Polyethyene Glycol + Sodium Chloride+Sodium Bi Carbonate+Potassium Chloride , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Potassium Chloride Injection0.15 Gm/Ml , Potassium Chloride Oral Solution Usp500 Mg/ 5Ml , Povidone Iodine Ointment 5% , Povidone Iodine Ointment 5% , Povidone Iodine Pessary , Povidone Iodine Scrub Solution / Cleansing Solution 7.5%W/V Povidone Iodine 7.5% , Povidone Iodine Solution10% , Povidone Iodine Solution5% , Povidone Iodine Solution5% , Powder Clotrimazole 1% W/W 30 Gm , Pralidoxime Chloride Injection 25 Mg/Ml , Prazosin Tablet (Extended Release) 2.5 Mg , Prednisoloneip 50Mg , Prednisolone Sodium Phosphate1% Eye/Ear Drop , Prednisolone Tablet 10 Mg , Prednisolone Tablet 20 Mg , Prednisolone Tablet 5 Mg , Pregabalin Capsule Ip 75 Mg , Primaquine Tablet 2.5 Mg , Primaquine Tablet 7.5 Mg , Probiotic Sachets 1 Gm Size (Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores) , Progesteroneinjection 200 Mg /2Ml , Promethazinesyrup Ip 5 Mg/ 5Ml , Promethazine Injection 25 Mg/Ml , Promethazine Tablet 25 Mg , Propofol Injection 10 Mg/Ml , Propranolol Tablet 40 Mg , Pyridoxine Tablet40 Mg , Pyridoxine Tablet 10 Mg , Quetiapine Tablet Ip 25 Mg , Quetiapine Tablet Ip 50 Mg , Quinine Dihydrochlorideinjection 300 Mg/Ml , Quinine Sulphate Tablet 300 Mg , Rabies Antiserum Ip (Equine) (I.M./Sc Use) 300 Units / Ml , Rabies Vaccine Human (Cell Culture) (Intradermal)2.5 Iu , Rabies Vaccine Human (Cell Culture) (Intramuscular) 2.5 Iu/ Dose , Racecadotril Sachet 30 Mg , Ramipril Tablet / Capsule 2.5 Mg , Ranitidine Hcl Injection 50 Mg/2Ml , Ranitidine Tablet 150 Mg , Ranitidine Tablet 300 Mg , Recombinant Coagulation Factor Viia - 1 Mg , Recombinant Coagulation Factor Viia - 2 Mg , Recombinant F Ix500 Iu With Diluent , Revolizer/ Rotahaler Device , Rh-Erythropoetininjection10000 Iu , Rh-Erythropoetininjection 2000 Iu , Rh-Erythropoetininjection 4000 Iu , Ringer Acetate Infusion 500 Ml , Risperidone Tablet2 Mg , Risperidone Tablet 1 Mg , Root Canal Sealer (Calcium Carbonate) , Salbutamoltablet 4 Mg , Salbutamol Inhalation 100 Mcg/ Dose , Salbutamol Nebuliser Solution 5 Mg/Ml , Salbutamol Syrup Ip 2 Mg/5Ml , Salbutamol Tablet 2 Mg , Salicylic Acid 16.7% + Lactic Acid 16.7% Paint , Saline Nasal Solution(Drops)0.65% , Salmetrol 50Mcg+Fluticasone 500 Mcg , Sertraline Tablet 50 Mg , Sevoflurane , Silver Sulphadiazine Cream 1% , Silver Sulphadiazine Cream Ip 1% , Snake Venom Anti Serum(Polyvalent Anti Snake Venom) Lyophillized , Sodium Bicarbonate Injection Ip 7.5% , Sodium Chloride 0.45% W/V Polypack 500 Ml , Sodium Chloride 6% Eye Ointment , Sodium Chloride And Dextrose Injection 0.9 % + 5 % , Sodium Chloride Injection , Sodium Chloride Injection , Sodium Phosphates Enema Bp , Sodium Valproatetablet 200 Mg , Sodium Valproate Ipinjection 100 Mg/Ml , Sodium Valproate Oral Solution Ip 200 Mg/ 5 Ml , Sodium Valproate(Gastro-Resistant) Ip Tablet 500 Mg , Soluble Insulin Injection 40 Iu / Ml , Solution Carbolic Acid 100% In 500 Ml , Solution Carbolic Acid 50% In 500 Ml , Solution Desfluraneusp 240 Ml Bottle , Solution Glycine Irrigation Solution 1.5% 3Ltr , Solution Hydrogen 11% + Silver Nitrate .01% , Solution Polyethyene Glycol With Elctrolyte Approx 130Gm , Spironolactone Tablet 25 Mg , Spironolactone Tablet 50 Mg , Streptokinase Injection 15 Lac Units , Succinylcholine Injection 50 Mg/Ml , Sulfasalazine Delayed Release Tablet 500 Mg , Sulphur + Calamine Lotion , Sunscreen (Octinoxate,Avobenzone , Oxybenzone) Spf 30 Lotion , Superoxidized Spray , Surfactant For Intratrecheal Instillation(Natural Bovine Lung Surfactant) , Surgical Spirit Bp , Surgical Spirit Bp , Syp. Alkylizer 1.4 Gm/5 Ml ( 100 Ml ) (Disodium Hydrogen Citrate) , Syp. Posacozazole 40Mg/Ml , Syrup Amlodipine Oral Solution 1 Mg/ Ml , Syrup Artemether 40Mg + Lumefantrine 240 Mg 30Ml , Syrup B. Complex , Syrup Baclofen Oral Solution 5 Mg /Ml , Syrup Calcium Phosphate 200 Ml , Syrup Cefaclor Each 5 Ml Contain Cefaclor 125 Mg , Syrup Cefixime Oral Suspension50mg , Syrup Cefixime Oral Suspension 100Mg , Syrup Cefpodoxime Proxetil Oral Suspension 100Mg , Syrup Cefpodoxime Proxetil Oral Suspension 50Mg , Syrup Cefuroxime Axetil Oral Suspension 125Mg/5Ml , Syrup Clarithromycin For Oral Suspension 125Mg/5Ml , Syrup Codienephosphate , Syrup Cyclosporine Oral Solution 100Mg/Ml , Syrup Cyproheptadine200ml , Syrup Dextromethorphan Hcl + Chlorpheniramine , Syrup Diatrizoic Acid Salts & Meglumine 66% & Sodium 10% & Iodine Content 370 Mg/Ml 30 Ml , Syrup Drotavarine , Syrup Each 15 Ml Contains: Milk Of Magnesia 11.25 Ml+Liquid Paraffin 3.75 Ml170 Ml , Syrup Each 5 Ml Containing : Paracetamol 125 Mg + Ibuprofen 100 Mg 60 Ml , Syrup Enzyme 100 Ml , Syrup Esomperazole , Syrup Fluconazole Oral Suspension , Syrup Furosemide Oral Solution 10Mg/30Ml , Syrup L-Carnosine 100Mg/5Ml In 200Ml , Syrup Levofloxacin Oral Solution , Syrup Linezolid 100Mg/5Ml In 30Ml , Syrup Mefenamice Acid 100Mg/5Ml , Syrup Mefenemic Acid 50 Mg + Paracetamol 250 Mg /60 Ml , Syrup Melatonin 60 Ml , Syrup Montelucast+Levocetrizine , Syrup Nitrofurantoin Oral Suspension 25Mg/5Ml In 100 , Syrup Ondansetron Oral Suspension , Syrup Oxybutynin Oral Suspension5 Ml , Syrup Phenobarbitone 20Mg/5Ml In 100Ml , Syrup Piracetam 500Mg/5Ml In 100Ml , Syrup Potassium Magnesium Citrate , Syrup Ranitidine Oral Suspension , Syrup Rifaximin , Syrup Sodium Bicarbonate Oral Suspension , Syrup Sodium Picosulphate Oral Suspension , Syrup Sorbitol + Tricholine Citrate , Syrup Sucralphate , Syrup Triclofos Oral Suspension500 Mg/ 5Mlin 30Ml , Syrup Ursodeoxycholic Oral Suspension 125Mg/5Ml In 100Ml , Syrup Zinc Oral Suspension 20 Mg/100 Ml , Tab Abiraterone Acetate Ip 250 Mg(Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg) , Tab Baclofen Ip 10 Mg (Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tab Cabergoline Ip 0.5Mg(Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg) , Tab Capecitabine Ip 500 Mg (Each Film Coated Tablet Contains Capecitabine Ip 500 Mg) , Tab Cyclophosphamide Ip 50 Mg (Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg) , Tab Dasatinib 100 Mg , Tab Dexamethasone Ip 4 Mg (Each Uncoated Tablet Containsdexamethasone Ip 4 Mg) , Tab Divalproex Extended Release Ip 250 Mg (Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg) , Tab Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg (Each Enteric Coated Tablet Contains Doxylamine Succinateusp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg) , Tab Ethamsylate Bp 500 Mg (Each Uncoated Coated Tablet Contains Ethamsylate Bp 500 Mg) , Tab Gefitinib Ip 250 Mg (Each Film Coated Tablet Contains Gefitinib Ip 250 Mg) , Tab Lacosamide 100 Mg (Each Film Coated Tablet Contains Lacosamide 100 Mg) , Tab Lamotrigine Ip50 Mg (Eachsustained Releasetablet Contains Lamotrigineip 50 Mg) , Tab Letrozole Usp2.5 Mg (Each Film Coated Tablet Containsletrozole Usp2.5 Mg) , Tab Levamisol Hydrochloride Ip 50 Mg (Each Uncoated Tablet Conatinlevamisol Hydrochloride Ip 50 Mg) , Tab Oxcarbazepine Ip150 Mg (Each Film Coated Tablet Contains Oxcarbazepine Ip150 Mg) , Tab Pyridostigmine Usp 60 Mg (Each Tabletcontains Pyridostigmine Usp 60 Mg ) , Tab Rosuvastatin 10 Mg , Tab Rosuvastatin Ip 20 Mg (Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg) , Tab Savelamer Carbonate 400 Mg (Each Film Coated Tablet Containssavelamer Carbonate 400 Mg) , Tab Sodium Bicarbonate Usp 1 Gm (Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm) , Tab Tizanidine Hydrochloride Ip 2 Mg (Each Uncoated Tabletcontainstizanidine Hydrochloride Ip 2 Mg) , Tab Topiramate Ip 25 Mg (Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , Tab.Nicoumalone 3 Mg , Tab.Nicoumalone 4 Mg , Tab. 6 Thioguanine Usp 40 Mg (Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg) , Tab. 6-Mercaptopurine 20 Mg , Tab. Acebrophylline 100 Mg , Tab. Acebrophylline Sr 200 Mg , Tab. Aceclofenac + Thiocolchicoside , Tab. Aceclofenac Sr 200 Mg , Tab. Aceclofenac+Paracetamol+ Serratiopeptidase (100+325+15 Mg) , Tab. Afatinib 20 Mg , Tab. Afatinib 30 Mg , Tab. Afatinib 40 Mg , Tab. Alendronate Sodium 70 Mg , Tab. Alfuzosin 10 Mg , Tab. Alpelisib 150 Mg (Monopoly) , Tab. Alpelisib 200 Mg (Monopoly) , Tab. Alpelisib 250 Mg (Monopoly) , Tab. Amantidine 100Mg , Tab. Amisulpride 50 Mg , Tab. Amoxycillin 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg& Potassiumclavulanate Ip 125 Mg , Tab. Apixaban 2.5 Mg , Tab. Apixaban 5Mg , Tab. Aripiprazole 10 Mg , Tab. Aripiprazole 5 Mg , Tab. Aspirinip 300 Mg , Tab. Aspirin Dispresible 325Mg , Tab. Atomoxetin 10 Mg , Tab. Atomoxetin 18 Mg , Tab. Atomoxetin 25 Mg , Tab. Atroxentine 250Mg (Trientine Hcl) , Tab. Axitinib 5 Mg , Tab. Bicalutamide Usp 50 Mg(Each Film Tablet Contains Bicalutamide Usp 50 Mg) , Tab. Bilastin 20 Mg , Tab. Biotin 5 Mg , Tab. Bosentan62.5 Mg , Tab. Bosutinib 500 Mg , Tab. Brivaracetam 50Mg , Tab. Buprinorphine 2 Mg , Tab. Calcium Acetate 667 , Tab. Calcium Folinate 15 Mg , Tab. Capmatinib 200 Mg (Monopoly) , Tab. Carbimazole 10 Mg , Tab. Carvedilol 3.125 Mg , Tab. Cefixime + Potassium Clavulanate 200+125Mg , Tab. Cefpodoxime 200Mg , Tab. Cefpodoxime Cv 375 , Tab. Cefpodoxime Proxetil 100Mg , Tab. Cefuroxime Axetil500 Mg. , Tab. Chlordiazepoxide 25 Mg , Tab. Chlordiazsepoxide 10 Mg + Clidinium 25 Mg , Tab. Chlorthalidone 6.25 Mg , Tab. Cholchicine 0.5Mg , Tab. Cilnidipine 20 Mg , Tab. Cilnidipine 5 Mg , Tab. Cilnidipine10 Mg , Tab. Cilostazol 100Mg , Tab. Cilostazol 50Mg , Tab. Clarithromycin 250 Mg , Tab. Clarithromycin 500Mg , Tab. Clonazepam 0.25 , Tab. Clonazepam 1Mg , Tab. Clonidine Hydrochloride Usp 0.1 Mg (Each Tablet Contains Clonidine Hydrochloride Usp 0.1 Mg) , Tab. Clozapine 100 Mg , Tab. Clozapine 25 Mg , Tab. Clozapine 50 Mg , Tab. Coq 300Mg(Capsule Of Co-Enzyme Q10 With Lycopene,Selenium & Omega 3 Fatty Acid ) , Tab. Cotriamazole 480Mgs , Tab. Cyproheptadine 4Mg , Tab. Cyproterone Acetate 2 Mg +Ethynil Estradiol. 035Mg , Tab. Dabigatran 110 Mg , Tab. Dabigatran 150 Mg , Tab. Dabrafenib 50 Mg , Tab. Dacomitinib 15 Mg (Monopoly) , Tab. Dacomitinib 30 Mg (Monopoly) , Tab. Dapagliflozin 10 Mg , Tab. Dapoxetine 30 Mg , Tab. Dapsone 100 Mg , Tab. Deflazacort 12 Mg , Tab. Deflazacort 6Mg , Tab. Desvenlafaxine 50Mg , Tab. Diclo & Sera& Para. , Tab. Diclofenac + Thiocolchicoside , Tab. Dienogest 2Mg , Tab. Diltiazemprolonged Released90mg , Tab. Dimethyl Fumarate 240Mg , Tab. Dimethyl Fumarate120 Mg , Tab. Disulfiram 125 Mg , Tab. Disulfiram 250Mg , Tab. Donepezil 5 Mg , Tab. Duloxetine Gastro Resistant 20 Mg , Tab. Duloxitine Gastro Resistant30 Mg , Tab. Dutasteride 0.5 Mg , Tab. Dydrogesterone 10Mg , Tab. Eltrombopag 25Mg , Tab. Eltrombopag 50Mg , Tab. Empagliflazone 10Mg , Tab. Empagliflazone 25Mg , Tab. Entacapone 200 Mg , Tab. Entecavir Ip 0.5 Mg (Each Film Coated Tablet Conatinsentecavir Ip 0.5 Mg) , Tab. Enzalupamide 40Mg , Tab. Erlotinib 100Mg , Tab. Erlotinib 150 Mg , Tab. Esomeprazole 40 Mg , Tab. Estradiolvalerate 2 Mg , Tab. Ethynil Estradiol 0.02Mg+ Tab Desogestral 0.15Mg , Tab. Etizolam 0.5 Mg , Tab. Etoricoxib+Thiocolchicoside(60+8 Mg) , Tab. Exemestane 25 Mg , Tab. Faropenem Sodium 200 Mg (Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg) , Tab. Febuxostat 40 Mg , Tab. Febuxostat 80 Mg , Tab. Fexofenadine120 Mg , Tab. Fexofenadine180 Mg , Tab. Fingolimod 0.5 Mg , Tab. Fludrocortisone 100Mcg , Tab. Flunarizine 10Mg , Tab. Fluvoxamine 100 Mg , Tab. Fluvoxamine 50 Mg , Tab. Folinic Acid 15Mg , Tab. Formaline , Tab. Furosemide 20Mg + Spironolactone 50Mg , Tab. Glucosamine Hydrocloride + Diacerin 50 Mg , Tab. Hp Kit(Pantoprazole 40 Mg +Metronidazole 400 Mg +Clarithromycin 500 Mg , Tab. Hydrocortisone Oromucosal 20 Mg , Tab. Hydrocortisone Oromucosal 5 Mg , Tab. Hydrocortisone Oromucosal10 Mg , Tab. Ibrutinib 140Mg , Tab. Indomethacin 75 Mg Sr , Tab. Inositol + Myoinositol 1000Mg , Tab. Ivabradine 5Mg , Tab. Ivermectin 12Mg , Tab. Ivermectin 6 Mg + Albendazole 400 Mg , Tab. Ivermectin 6Mg , Tab. Ketoconazole 200 Mg , Tab. Ketorolac 10 Mg , Tab. Lacosamide 50 Mg , Tab. Lamotrigine Dispersible 100Mg , Tab. Lapatinib 500Mg , Tab. Lenalidomide25mg , Tab. Lenalidomide 10 Mg , Tab. Lenvatinib 10 Mg , Tab. Lenvatinib 4 Mg , Tab. Levetiracetamip 250 Mg , Tab. Levodopa+Carbidopa 125 , Tab. Levodopa+Carbidopa+Entacapone 100Mg/25Mg/200Mg , Tab. Levofloxacin 750 Mg , Tab. Levofloxacin Ip 500 Mg (Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg) , Tab. Levosulpiride 25 Mg (Each Uncoated Tablet Containslevosulpiride 25 Mg) , Tab. Levosulpride 75Mg , Tab. Levothyroxine Sodium25 Mcg , Tab. Levothyroxine Sodium75 Mcg , Tab. Linaglipitin 2.5Mg , Tab. Linaglipitin 5Mg , Tab. Lopinavir 200Mg+Ritonavir 50 Mg , Tab. Loratadine 10 Mg , Tab. Lorazepam Ip 2 Mg (Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Tab. Lorlatinib 100 Mg , Tab. Lorlatinib 25 Mg , Tab. Megestrol Acetate 160 Mg , Tab. Melatonin 3 Mg , Tab. Melphalan 2Mg , Tab. Mesalamine Usp 1.2 Gm Enteric Coated (Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm) , Tab. Methimazole10mg , Tab. Methimazole5 Mg , Tab. Methotrexate 15Mg , Tab. Methotrexate 7.5Mg , Tab. Methylphenidate 10 Mg , Tab. Methylprednisolone4mg , Tab. Methylprednisolone 16Mg , Tab. Methylprednisolone 8Mg , Tab. Metolazone 5Mg , Tab. Meverberine 135 Mg + Chlordiazepoxide 10 Mg , Tab. Midostaurin 25 Mg (Monopoly) , Tab. Mifepristone25mg , Tab. Mirabegeron50 Mg , Tab. Mirabegeron 25 Mg , Tab. Mirtazapine 15Mg , Tab. Mirtazapine 7.5Mg , Tab. Montelukast 10 Mg , Tab. Montelukast 4Mg , Tab. Montelukast 5 Mg , Tab. Morphine10mg , Tab. Morphine30mg , Tab. Moxifloxacin400 Mg , Tab. Moxonidine 0.2 Mg , Tab. Mycophenolate Sodium 360 Mg (Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg) , Tab. N-Acetylecystine Effervescent Form, Orange Flavour, 600 Mg , Tab. Naltrexone50 Mg , Tab. Nebivolol 10Mg , Tab. Nebivolol 5Mg , Tab. Nicorandil 5Mg , Tab. Nicoumalone 1 Mg , Tab. Nifidipine 20Mg , Tab. Nifidipine 20Mg Sr , Tab. Nilotinib200 Mg (Monopoly) , Tab. Nilotinib 150 Mg (Monopoly) , Tab. Nilotinib 300Mg (Monopoly) , Tab. Nitazoxanide 500Mg , Tab. Nitrazepam 10 Mg , Tab. Nitrazepam 5Mg , Tab. Olaparib 150 Mg (Monopoly) , Tab. Olaparib 50 Mg (Monopoly) , Tab. Olmesartan Medoxomil 20 Mg , Tab. Orciprenaline 10 Mg , Tab. Osimertinib 80 Mg (Monopoly) , Tab. Oxazepam 15Mg , Tab. Oxcarbazepine 300Mg , Tab. Oxcarbazepine 450Mg , Tab. Pancreatin Gastroresistant 10,000Mg(With Proteiase & Amylase) , Tab. Pantoprazole 20Mg , Tab. Paracetomol 650 Mg , Tab. Paroxetine 12.5Mg , Tab. Paroxetine 25Mg , Tab. Pazopanib 200Mg , Tab. Pazopanib 400Mg , Tab. Penicillin V 400Mg , Tab. Pentoxifylline Extended Release/Sr 400Mg , Tab. Perampanel 2 Mg , Tab. Perampanel 4Mg , Tab. Pheniramine 25 Mg , Tab. Phenozopyridine 200Mg , Tab. Pirfenidone 200 Mg , Tab. Pirfenidone 400 Mg , Tab. Piroxicam Dt 20Mg , Tab. Pomalidomide 2 Mg , Tab. Pomalidomide 4 Mg , Tab. Posacozazole 100Mg , Tab. Prasugrel 10Mg Tab , Tab. Prazosin 5Mg , Tab. Prednisoloneip 40Mg , Tab. Primidone 250 Mg , Tab. Primidone 50 Mg , Tab. Prochlorperazine 5Mg , Tab. Progesterone Only Pills , Tab. Propranolol 10Mg , Tab. Propranolol 40 Mg Sr , Tab. Propylthiouracil 100 Mg , Tab. Pyridoxine100 Mg , Tab. Ranolazine 500Mg , Tab. Rasagiline1mg , Tab. Regorafenib 40 Mg , Tab. Repaglinamide 0.5Mg , Tab. Repaglinamide 1Mg , Tab. Ribociclib 200 Mg (Monopoly) , Tab. Rifampicin 150 Mg , Tab. Rifampicin 450 Mg , Tab. Rifampicin 600 Mg , Tab. Rifaximin 200 , Tab. Rifaximin 550Mg , Tab. Rivaroxaban 10Mg , Tab. Rivaroxaban 15Mg , Tab. Rivaroxaban 20Mg , Tab. Rizatriptan 10Mg , Tab. Ropinirole 0.25Mg , Tab. Rosuvastatin 10Mg + Fenofibrate 160Mg , Tab. Ruxolitinib 10 Mg , Tab. Ruxolitinib 15 Mg , Tab. Ruxolitinib 20 Mg , Tab. Ruxolitinib 5 Mg , Tab. Sacubitril 24 Mg And Valsartan 26 Mg , Tab. Selegiline 5Mg , Tab. Serratiopeptidase 10Mg , Tab. Serratiopeptidase 20 Mg , Tab. Sevelamer Carbonate 800 Mg , Tab. Sildenafil 20 Mg , Tab. Sildosin + Dutasteride , Tab. Silymarin 70Mg. , Tab. Sitagliptine + Metformin (50/500) , Tab. Sofosbuvir 400 Mg+ Velpatasvir 100 Mg , Tab. Solifenacin Succinate10 Mg , Tab. Sorafenib 200 Mg , Tab. Sotalol Hydrochloride Usp/Bp 40Mg (Each Film Coated Tablet Contains Sotalol Hydrochloride Usp/Bp 40Mg) , Tab. Sultamicin 375 Mg , Tab. Sunitinib 12.5 Mg , Tab. Sunitinib 25 Mg , Tab. Sunitinib 50 Mg , Tab. Tacrolimus 1Mg , Tab. Tamsulosin + Dutasteride , Tab. Tapentadol50mg , Tab. Tegafur + Uracil 100 Mg , Tab. Tenofovir 300Mg , Tab. Terbinafine Hydrochloride 250 Mg , Tab. Tetrabenazine 25Mg , Tab. Ticagrelor 90Mg , Tab. Tofacitinib 5 Mg , Tab. Tolvapatan 15Mg , Tab. Topiramate50mg , Tab. Torsemide20mg , Tab. Tramadol 37.5Mg + Paracetamol 325Mg , Tab. Trimetazidine 35Mg , Tab. Trimetazidine 60Mg , Tab. Trypsin + Rutoside+Bromelain , Tab. Trypsin Chymotripsin , Tab. Ulipristal 5Mg , Tab. Valganciclovir 450 Mg , Tab. Verapamil Hydrochloride Sustained Release 120 , Tab. Verapamil Hydrochloride Sustained Release 40 , Tab. Vildagliptin 50Mg , Tab. Voglibose 0.2 Mg Tab , Tab. Voglibose 0.3 Mg Tab , Tab. Voriconazole 200 Mg , Tab. Warfarin 1Mg , Tab. Warfarin 2Mg , Tab. Warfarin 3Mg , Tab. Zinc 50Mg , Tab. Zolpidem 10Mg , Tab. Zolpidem 5 Mg , Tab. Zonisamide 100 Mg , Tab. Zonisamide 50Mg , Tab./Cap Everolimus 10Mg , Tab./Cap Everolimus 5Mg , Tab./Cap Hydroxyurea 500Mg , Tab./Cap Tacrolimus 0.25 , Tab./Capnintedanib 150Mg , Tab.Cefadroxil 250 Mg , Tab.Cefadroxil 500 Mg , Tab.Phenazopyridine 5 Mg , Tacrolimus 0 .03%15 Gm , Tacrolimus 0 .1% 15 Gm , Tamoxifen Tablet 10 Mg , Tamsulosinhcltablet 0.4 Mg , Telmisartan Tablet Ip 40 Mg , Tenaligliptin Tablet 20 Mg , Terbutaline Sulphate Tablet Ip 2.5 Mg , Tetanus Immunoglobulin 250Iu , Tetanus Vaccine(Adsorbed) Ip , Theophylline And Etophylline Injection 50.6Mg + 169.4Mg , Theophylline And Etophylline Tablet 23Mg + 77Mg , Theophylline Tablet(Sr) 400 Mg , Thiamine Tablet 100 Mg , Thiopentone Injection 0.5 G , Thyroxine Sodium Tablet 100 Mcg , Thyroxine Sodium Tablets Ip 50 Mcg , Timolol Eye Drops 0.50% , Tinidazole Tablet Ip 300 Mg (Film Coated) , Tinidazole Tablet Ip 500 Mg (Film Coated) , Tiotropium 9Mcg Inhaler , Tobramycin And Dexamethasone Ophthalmic Suspension 0.30%+0.10% , Tobramycin Eye Drops 0.30% , Tobramycin Ophthalmic Ointment 0.30% , Torsemide Injection10 Mg/Ml , Torsemide Tablet 10 Mg , Tramadol Capsule 50 Mg , Tramadol Injection 50 Mg/Ml , Tranexamic Acid Tablet 500 Mg , Travoprost Ophthalmic Solution 0.004% , Tretenoin Cream 0.03% , Trifluperazine Tablets Ip5 Mg , Trihexyphenidyl Hydrochloride Tablet 2 Mg , Tropicamide Eye Drops 1% , Urokinase Injection 5 Lac Unit , Ursodeoxycholic Acid Tablet 300 Mg , V Moxonidine 0.3 Mg , Valethamate Bromide Injection 8 Mg/Ml , Vancomycin For Intravenous Infusion Ip 1 Gm , Vancomycin Injection 500 Mg , Vdrl Antigen (With +Ve And -Ve Control) / Rpr Slide Kit , Vecuronium Bromide For Injection 4 Mg (Freeze Dried) , Verapamil Tablets Ip 40 Mg , Vinblastineinjection 10 Mg/10 Ml , Vincristineinjection 1 Mg/Ml , Vitamin A Solution 1 Lac Iu/Ml , Vitamin B Complex Injectionnfi , Vitamin B Complex Tablet Nfi (Prophylactic) , Vitamin D3 Oral Solution 60000 Iu , Vitamin K Injection10 Mg/Ml , Vitamin K-1 (Phytomenadione) 1 Mg/0.5Ml Injection , Warfarin Sod. Tablet 5 Mg , Water For Injection Ip , Wax Dissolving Ear Drops: Paradichlorobenzene , Benzocaine , Chlorobutanol , Turpentine Oil2% + 2.7% + 5% + 15% , Xylocaine Lubricating30gm , Xylometazolinenasal Drops 0.1% , Zinc Oxide +Alo Vera +Semethicone , Zinc Sulphate Dispersible Ip Elemental Tablet 10 Mg , Absorbable Gelatin Sponge Ip 66, Size 80(+-10) Mm X 50 Mm X 10 Mm Should Be Sterlized. , Absorbent Cotton Wool Ip 500 Gm , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set / Blood Transfusion Set • Sharp And Easy Piercing Spike Suitable For Blood Bags And Standard Blood Containers • Transparent Cylindrical Drip Chamber With Filter.Filter Size Should Be 200+20 Micrometer. • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Transfusion Rate • Should Conform To Is 9824(Part 3):1996 , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Shouldconform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powderfree (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Shouldconform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powdered,,Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Shouldconform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powderfree (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Shouldconform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic •Shouldconform To Is 13422 •Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 ½ Inches • Made Of Natural Rubber Latex, Powderfree (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Shouldconform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards , Suction Catheter, Sterile. Size: Fg 5 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 6 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 8(For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 10 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 12 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 14 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 16 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 18(For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 20 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 22 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 8 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specificationfor B,C,D,E,F,G Should Be Mentioned As Per Is 11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size10 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specificationfor B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size16 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity30 ± 1Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specificationfor B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way,Size18 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specificationfor B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way,Size20 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specificationfor B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way,Size22 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity30 ± 1 Ml • Should Conform To Is 11497 •Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specificationfor B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way,Size 24 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specificationfor B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Infant Feeding Tube Size:10Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure •Radio Opaque Line • Sterile , Infant Feeding Tube Size:8Fg, Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure •Radio Opaque Line • Sterile , Infant Feeding Tube Size:5Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure •Radio Opaque Line • Sterile , Sterile Disposable Perfusion Set With Airway And Needle (Adult Use) • For Gravity Feed Only • Sharp And Easy Piercing Spike With Air Vent • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Self Sealing Latex Bulb Which Will Also Act As An Port For Extra Medication • Efficient Roller Clamp To Control And Adjust The Fluid Rate • 21 G Needle • Should Conform To Is 12655 -4 Standard , Sterile Disposable Perfusion Set (Infusion Set) With Airway And Needle(Paediatric Use) • Burette Type Measured Volume Chamber Of 100 Ml • Drop Size Of Approx 60 Drops Per Ml • Injection Port,Latexfree, For Intermittent Medication. • Floating Auto Shut Off Valve (Latex Free) In Burette. • Soft And Kink Resistant Pvc Tubing. • Roller Controller For Flow Control • Tube Length 150 Cm • 23G Needle • Should Conform To Iso 8536-5 , Sterile Disposable Infusion Set With Microdrip (I.V.) • Microdrip Infusion Set With Drop Size Reduced To Approx 60 Drops Per Ml • Sharp And Easy Piercing Spike • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Fluid Rate • Should Conform To Is 12655 - 4 Standard , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conform To Is 12227 , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 16G • Should Be Packed In Transparent, Single Blister Pack. •Should Conform To Is 10555 Standard , Sterile Disposable (Single Use Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.)Size 18G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G • Should Be Packed In Transparent, Single Blister Pack. •Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port.Size 24G • Suitable For Paediatric & Neonatal Use • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Mucus Extractor Sterile • Clear Transparent Container • Antibacterial Filter • Soft, Kink Resistant Pvc Tubing • Tube Size 10 Fg; Length 40 Cm (Min.) • Capacity 25 Ml , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing)All Sizes (Adult) •Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing)All Sizes (Pediatrics) •Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Paper Adhesive Plaster 1 X 9.0 Mts (With Cutter) Non Woven Adhesive Tape,Hypoallergic,Should Have Some Stretch Bonding , Paper Adhesive Plaster 2 X 9.0 Mts (With Cutter) Non Woven Adhesive Tape Hypoallergic, Should Have Some Stretch Bonding , Paper Adhesive Plaster 3 X 9.0 Mts (With Cutter)Non Woven Adhesive Tape Hypoallergic, Should Have Some Stretch Bonding , Plaster Of Paris Bandages15cm X 2.7Mts / Roll Should Conform To Schedulef(Ii) Of Drug And Cosmetic Act 1940 , Plaster Of Paris Bandages 10Cm X 2.7Mts / Roll Should Conform To Schedulef(Ii) Of Drug And Cosmetic Act 1940 , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size:10 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size:12 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size:14 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size:16 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size:18 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Scalp Vein Set (Disposable):Size 18G •Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritanttube • Sterile , Scalp Vein Set (Disposable):Size 20G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded •Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation •Female Luer Fitting At One End •Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable):Size 22G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable):Size 24G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 2 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow •Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Orequivalent Should Be Written On Unit Container , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 5 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow •Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Orequivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 10 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow •Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Orequivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 20 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow •Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Orequivalent Should Be Written On Unit Container. , Surgical Blade Sterile, Size 11 • Single Peel Pack In Metal Foil •The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 15 • Single Peel Pack In Metal Foil •The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 22 • Single Peel Pack In Metal Foil •The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Suture Needles Curved 1/2 Circle Round Body Assorted Size 11-15 • It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Its Point. • Type Of Eye Of The Needle Should Be Mentioned. • Should Conform To Is-9165 , Suture Needles Curved 1/2 Circle Round Body Assorted Size 1-5 • It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Its Point. • Type Of Eye Of The Needle Should Be Mentioned. • Should Conform To Is-9165 , Suture Needles Curved 1/2 Circle Round Body Assorted Size 16-20 • It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Its Point. • Type Of Eye Of The Needle Should Be Mentioned. • Should Conform To Is-9165 , Suture Needles Curved 1/2 Circle Round Body Assorted Size 6-10 • It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Its Point. • Type Of Eye Of The Needle Should Be Mentioned. • Should Conform To Is-9165 , Suture Needles Curved And Cutting 1/2 Circle Cutting Size 6-10 • It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Its Point. • Type Of Eye Of The Needle Should Be Mentioned. • Should Conform To Is-9165 , Suture Needles Curved And Cutting 1/2 Circle Size 11-15 • It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Its Point. • Type Of Eye Of The Needle Should Be Mentioned. • Should Conform To Is-9165 , Suture Needles Curved And Cutting 1/2 Circle Size 16-20 • It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Its Point. • Type Of Eye Of The Needle Should Be Mentioned. • Should Conform To Is-9165 , Suture Needles Curved And Cutting Size 1-5 • It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Its Point. • Type Of Eye Of The Needle Should Be Mentioned. • Should Conform To Is-9165 , Sterile Disposable Spinal Needle For Single Use 22G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Sterile Disposable Spinal Needle For Single Use 25G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Urine Collecting Bag, Disposable 2000 Ml • Transparent Sheet • Kink Resistant Flexible Tubing Not Less Than 90 Cm In Length • Should Have Non-Return Valve • Top Drainage Outlet • Graduated Bag • Moulded Handle For Easy Handling , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Endotracheal Tube, Plain - Size 2.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain- Size 5.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain With Radio-Opaque Line, Sterile, Single Use- Size 6Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 6.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Cuffed - Size 4Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff- Size 4.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff- Size 5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff- Size 7.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 9 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Tracheostomy Tube (Pvc), Plain, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line , Tracheostomy Tube (Pvc), Cuffed, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line • Balloon With Non Return Valve , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 24) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 28) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 32) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Corrugateddrainage Sheet, Sterile, Multichannel, With Radio Opaque Line, Single Use - All Sizes , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.5 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Sterilised Umbilical Cotton Tape Width 3 Mm, Length 75 Cm Should Conform To Schedulef(Iii) Of Drug And Cosmetic Act 1940 , Bone Wax Sterilised , Temporary Cardiac Pacing Wire (Electrode) Sterile ½ Cir, Tapercut, 26 Mm; Straightcutting60 Mm ,Breakaway , Skin Graft Knife Blade (Sterile) (Disposable ) Skin Grafting Knife Blade (Sterile) Made Of Carbon Steel Or Stainless Steel Material 158 Mm Long Individually Wrapped In Wrapper Corrosion Inhibitor Paper In Single Packet,.In Packs Of 10. The Edge Must Be Sharp Enough To Cut The Skin In A Single Shave And Should Snugly Fit In The Handle Should Conform To Is 3759. 2. Skin Grafting Knife Handle (Watson Modification Of Humby’S Knife ) Stainless Steel, Ce Certified, In Which The Blade Specified In (A) Above Should Fit Snugly. Should Conform To 7980-1976. , K Wire, Length 375 Mm; 1Mm Length Of Wire Should Be Mentioned With Specification. Should Conformto Is 8261 , K Wire,Length 375 Mm;1.6Mm • Length Of Wire Should Be Mentioned With Specification. • Should Conformto Is 8261 , K Wire, Length 375 Mm; Size 1.8Mm • Length Of Wire Should Be Mentioned With Specification. •Should Conformto Is 8261 , Face Mask, Disposable • Should Be Manufactured From Non Woven Poly Prop Fabric • Should Be 3 Ply Construction • Should Have High Bacterial Filtration Efficiency • Should Be Heat Sealed To Keep 3 Layers Together • Standard Size 17.5 X9 Cm • Color Green/Blue • There Should Be A String Each At All Four Corners,Length Of String Should Be 40Cm • Nose Clip Should Be There •No Elastic Band. , Surgical Cap, Disposable (For Surgeons) • Should Be Manufactured From Non Woven Fabric. • Strip For Tying The Cap Stitched On The Back For Proper Grip On The Forhead. • Green Colour • Ultrasonically Stitched • Air Permeable/Breathable • Should Retain Skin And Hair Particle. • Strip For Tying The Cap , Surgical Cap, Disposable ( For Nurses) • Should Be Manufactured From Non Wovenfabric • Blue / Green Colour • Round Upon Wearing, With Elastic •Air Permeable / Breathable •Should Retain Skin And Hair Particles , Foldable Intra Ocular Lense With Injector (Size + 11 D To +17.5 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics ( 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 11 D To +17.5 D At 0.5 D Step. 9.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 18 D To + 24 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 18 D To + 24 D At 0.5 D Step. 9.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 24.5 D To + 28.5 D ) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 9.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 11 D To +17.5 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics – Modified C Shaped With 5° -10°Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 11 D To +17.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 18 D To + 24 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics – Modified C Shaped With 5° -10°Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 18 D To + 24 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 24.5 D To + 28.5 D ) 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Bioconvex 3. Iol Haptics – Modified C Shaped With 5° -10°Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Ofnaturalrubberlatexpowdered,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Ofnaturalrubberlatexpowder Free,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Extra Small. Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Small Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Medium Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Large Should Conform To Is 15354 , Pressure Monitoring Line / High Pressure Extension Line • Suitable For High Pressure Monitoring And For Connection Between Syringe Infusion Pump And Patient • Male Luer Lock At One End And Female Luer Lock At Other End ; Should Fit All Standard Equipment. Luer Lock Connectors Should Provide Secure Fitting. • Pressure Upto 800 Psi • Length 200 Cm • Sterile , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml • Should Have Suitability For Both Male And Female Patients • Should Be Provided Withadhesive For Fixation And Good Grip With Minimal Risk Of Allergy And Injury • Capacity 100 Ml • Sterile , Umbilical Catheter (For New Born) All Sizes • Radio Opaque Line • With Female Flexible Mount • Colour Coded Connector • Open Tip Should Be Soft, Rounded, Atraumatic • Length 40 Cm , Umbilical Cord Clamp • Suitable For Clamping Umbilical Cord Of New Born • Security Lock To Prevent Accidental Opening After Clamping • Grooved Clamping Area , Absorbable Oxidizedregenerated Cellulose Net Size 2”X 3” With Surgical Sponge Topical Absorbable Haemostatic Bactericidal Property , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And “Y”Connector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 16 Fg , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And “Y”Connector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter18 Fg , T – Tube For Common Bile Duct Drainage • Kehr’S T Tube Made From Medical Grade Pvc, And Siliconized • Smooth, Kink Resistant • Radio Opaque Line Throughout The Length • Sterile • Length 20 X 60 Cm • Size 10 To 18 Fg , Bone Cement With Antibiotics,Fast And Slow Setting , Sanitary Napkin, Beltless 1. Covering – Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler – The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc. 3. Back Strip – A Back Strip For Sticking The Sanitary Napkin Onto The Underwear Should Be There Using Good Quality Adhesive Material. 4. Size -The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Total Pad Length 210 +_ 10 230 +_ 10 Width60 To 75 70 To 85 Thickness8 +_ 2 5. Weight : Not More Than 10 Gm . . Instructionfor Usage Should Be Mentioned On Every Packet , Sanitary Napkin, Belttype 1. Covering – Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler – The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc 3. Size -The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Pad Length220 +_ 10 Width 70 +_ 5 Thickness17 +_ 3 4.Weight : 12 +_ 3 Gm 5.Pack – Six Napkins In A Pack. 6.Elastic Belt With Loops Shall Be Provided In Each Pack. 7.Absorbency: The Napkin Should Be Able To Absorb Not Less Than 30 Ml Of Normal Saline Or Coloured Water Or Test Fluid When Poured On To The Centre Of The Napkin At The Rate Of 15 Ml Per Minute. .Instruction For Usage Should Be Mentioned On Every Packet. , Belt-Less Sanitary Napkin With Wings 1. Covering (Absorbing Top Sheet Corrector)–Good Quality Knitted Sleeve Or Non Woven Fabric Of Rash Free,Non Irritant And Soft To Touch Material Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet Absorbency Requirements.The Napkins Shall Have A Non Absorbent Barrier On One Side With Adhesive Covered By A Differently Identifiablepaper 2.Overall Length(Mm)230 ± 5 3.Core Length 220 Mm± 10 4.Fluff Core/Padlength220 Mm± 10 5. Over All Width With Wings160mm+_5 6.Fluff Core/Padlength70 Mm± 5 7.Thickness Of A Single Pad9-10Mm 8.Weight Of A Single Pad : 8-10 Gm 9.Packsix Napkins In A Pack. 10Type.-Belt-Less Sanitary Napkin Withwings 11.Minimum Absorbency:50Ml 12.Ph Value Of Absorbent Material6-8.5 B. Disposable Individual Pouch Or Wrapper For Each Sanitary Napkin(As Per Ministry Of Environment,Forest And Climate Change Dated 08.04.2016) Pouch/Wrapper Specifications :- 1. Pouch/Wrapper Should Be Of The Size Of Sanitary Napkin Being Supplied. 2. It Should Have Adhesive To Seal The Sanitary Napkins Within. 3. Pouch/Wrapper Should Not Be Transparent. Note : Instructions For Use Of Disposable Pouch/Wrapper Mst Be Written In Hindi On Disposable Pouch/Wrapper. Blrseky Fd;S Gq;S Lsusvjh Usifdu Dks Eksm Dj Disposable Pouch/Wrapper Esa Mkys ,Oa Disposable Pouch/Wrapper Dks Xksan Yxh Iv~Vh Ls Cun Dj Lqjf{Kr Rjhds Ls Dwmsnku Esa Mkysaa , Oxygen Mask (Adult) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. , Oxygen Mask (Paediatric) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Materialwith Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. • Mask Connector 4M , Sterile Catheter, Single Use, For Urinary Drainage(Foley Baloon Catheter), 2 Way, Size 14 • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For A Traumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30+- 1Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Ballon Capacity Should Be Mentioned As Per Is 11497 • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 , Nelaton - Catheter Size 14 Fg Distal End Is Close And Proximal End Has Female Colour Code Connector • Soft, Kink Resistant Medical Grade Pvc Tube • Length:40 Cm • Individually Packed In Poly And Sterile , Ecg Electrode •Reliable Trace, •High Conductivity,• Easy To Handle , Surgical Blade Sterile, Size 23 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction Duringmovement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Orequivalent Should Be Written On Unit Container. , Urethral Catheter90 (Fg-14), Made Up Of Medical Grade Pvc , Urethral Catheter91 (Fg-10), Made Up Of Medical Grade Pvc , Vaccum Suction Set, 2.5 Meter Length, •Suction Handle With Suctiontube •Sterile,• Pyrogenic Free, •Latex Free,• Single Use , Epidural Minipack 18G, 90 Mm,Metal Stylet For Single Use Only, •Sterile, •Epidural Catheter 20G, L 90 Cm, •6 Lateral Holes Closedend, •Borst Adapter •Epidural Catheter Flat Filter 0.2 Micro Meter •Thread Assist Guide•Lor (Loss Of Resistance) Plastic Syringe 6 Ml , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No.22Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No.18 Double Lumen Size 45 Cm(Longline Iv.) , Vascular Catheter With Metal Guide No.20 Double Lumen Size45 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45Cm (Longline Iv.) , 3 Waystop Cock ,Non Pyrogenic & Single Use,Should Be Leak Proof, With Smooth Movements , 3 Waystop Cock With Extension Tube(Vein -O-Line) Size 10Cm (Non Pyrogenic & Single Use) , 3 Waystop Cock With Extension Tube(Vein -O-Line) Size 50Cm (Non Pyrogenic & Single Use) , 3 Waystop Cock With Extension Tube(Vein -O-Line) Size 100Cm(Non Pyrogenic & Single Use) , 3 Waystop Cock With Extension Tube(Vein -O-Line) Size 150 Cm(Non Pyrogenic & Single Use) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) • Graduated Bag, • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Elastic Adhesive Bandage Bp1m X 10Cm Adhesive Material Should Have Good Quality Sticking Property, Non-Allergic , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G · Should Be Packed In Transparent Single Blister Pack · Should Confirm To Is 10555 Standard · (Neonatal Iv Cannula Size 26) , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof,Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof,Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof,Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof,Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Paediatric · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads In Small Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear · Should Be Single Use With Bronchoscopy And Co2 &O2 Port With Chin Support · Non Allergic, Leak Proof, Contour Should Be Maintained , Nebulization Mask Adult , Nebulization Mask Paediatric , Chemotherapy Port &Non-Coring Needles(Adult) · Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Port With Small Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 8Fr With Silicon Material With Peel Apart Percutaneous Introducer System. · Chemo Port Huber Needle 20G And 22G. , Chemotherapy Port &Non-Coring Needles(Pediatric) · Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Power Port With Large Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 6Fr With Silicon Material With Peel Apart Percutaneous Introducer System · .Chemo Port Huber Needle 20G And 22G. , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (3/8 Cir Rb Needle 40Mm Length 76 Cm)1/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 30Mm Needle, Length70cm) 1/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 31Mm Needle, Length70cm) 2/0 , Absorbablesurgicalsuture(Synthetic) Antibacterial Coatedsterilisedneedledsuture(Braidedcoated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm/ 2/0 , Absorbablesurgicalsuture(Synthetic) Antibacterial Coatedsterilisedneedledsuture(Braidedcoated Polyglactin/Polyglycolic Acidviolet)3/8Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm 3/0 , Absorbablesurgicalsuture(Synthetic) Antibacterial Coatedsterilisedneedledsuture(Braidedcoated Polyglactin/ Polyglycolic Acidviolet)1/2Circle Ctroundbodied40mm,Gsneedle,Suture Length 90 Cm 1/0 , Absorbablesurgicalsuture(Synthetic) Antibacterial Coatedsterilisedneedledsuture(Braidedcoated Polyglactin/ Polyglycolic Acidviolet)1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm 1 , Absorbablesurgicalsuture (Synthetic) Antibacterial Coatedsterilisedneedledsuture (Braidedcoated Polyglactin /Polyglycolic Acid Violet)1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm/ , Absorbablesurgicalsuture (Synthetic) Antibacterial Coatedsterilisedneedledsuture(Braidedcoatedpolyglactin/ Polyglycolic Acidviolet) 1/2 Circle Ctroundbodied40mm,Gsneedle,Suture Length 90 Cm/ 1/0 , Absorbablesurgicalsuture (Synthetic) Antibacterial Coatedsterilisedneedledsuture(Braidedcoated Polyglactin /Polyglycolic Acid Violet) 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm 3/0 , Absorbablesurgical Suturespolyglecaprone / Polyglyconate, Monofilament Sutures(3/8 Circle Cutting24- 26Mm Needle, Suture Length Of 70-90Cm) 3/0 , Absorbable Surgicalsuturesmonofilament Sutures Polyglecaprone /Polyglyconate (L/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) 4/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (3/8 Rb Needle 30Mm Length 76 Cm) 2/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 40Mm Length 76 Cm) 1/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Cutting Needle 8Mm, Length 35 Cm) 6/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16Mm, Length 76 Cm) 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 19Mm Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) 4/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (1/2 Cir Rb Needle 45 Mm Length 100 Cm) 1 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 20Mm Length 76 Cm)3/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanoneviolet (1/2 Circle Reverse Cutting 40-50 Mm Length 70- 90Cm) 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide ) (1/2 Cir Rb Needle 40Mm Length 90 Cm 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)(1/2 Cir Rb Needle 20Mm Length 70 Cm) 4/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide)1/2 Cir Rb Needle 30Mm Length 90 Cm 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Conventional 25Mm Length 90 Cm)Undyed3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 40Mm Length 90 Cm) 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle 20Mm Length 70 Cm 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle40mm Length 90 Cm1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length75- 90 Cm1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Tapercut Needle (Heavy) 35-40Mm Length 75-90 Cm 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting 16Mm Needle, Suture Length70cm 4/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting Needle 22Mm Length 45 Cm3/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglecaprone / Polyglyconate, Monofilament Sutures(1/2 Circle Oval Rbneedle 26Mm Needle, Suture Length Of 70Cm) 2/0 , Absorbable Surgical Suturespolyglecaprone / Polyglyconate, Monofilament Sutures (L/2 Circle Oval Rbcontrast Needle 26Mm, Suture Length 70Cm)3/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) *With 1/2 Circle Taper Cut , 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) 1/2 Circle Taper Cut , 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm2/0 , Non Absorbable Surgical Suture, ,Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/Whitecoated Polyster Braided (Green / Blue)With 1/2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/Whitepolybutylate / Silicon Coated Polyster Braided Green / Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/Whitepolybutylate / Silicon Coated Polyster Braided White (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Sutureblack Braided Silk (1/2 Cir Rb Needle 20Mm, Length 76 Cm)3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Sutureblack Braided Silk (3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Sutureblack Braided Silk (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturebraided Coated Polyster,Green/White Or Blue/Whitepolybutylate / Silicon Coated Polyster Braided Green/ Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm) 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm Length 90 Cm) 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue(1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue(1/2 Cir Tapercut Double Needle 17Mm Length 70-90 Cm)4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue(1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue(1/2 Circle Cc 13Mm Needle,Suture Length Of 70Cm) Double Arm 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Rb13 Mm Needle,Length 75Cm) Double Arm 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Rb Heavy Needle 40-45Mm Length 75-90 Cm) 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Rb Needle 16 Mm Length 70 Cm) 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm, Length 90 Cm) 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle Cutting Size 16-17Mm Length 70-90 Cm)5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Circle Tapercut 13Mm Double Needle 70Cm) 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (3/8 Cir Cutting Needle 25Mm Length 45 Cm) 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle,Length 70 Cm) 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (3/8Cir Rb 16Mm Needle,Length 90 Cm) 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue (L/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturemonofilament Polypropylene Blue Usp(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cirr Cutting Needle 40-45Mm Length 60-70 Cm.) 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 16 Mm Length 70 Cm)3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm 10/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk Withneedle Silk(3/8 Cir Rb Needle 16Mm, Length 76 Cm) 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk Withneedle Silk (3/8 Cir Rb Needle 20Mm, Length 76 Cm) 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon)(3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm)8/0 , Non Absorbable Surgical Suture,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue(3/8Cir Rb Double 8Mm Needle, Length 60 Cm) 7/0 , Medimop(Size 25Cmx252cmx8ply) , Botroclot 10Ml , Et Tube Stylet , Loxigard 2% 50Ml , Inj Methylcobalamine1500mcg , Sumag Cream , Hypodermic Needle 24 , Hypodermic Needle 26 , Hand Sanitizer Solution 5 Liter , Hypochlorite Solution 5 Liter , Suture Silk 4-0 , Suture Vicyryl 8-0 , Suture Nylon 10-0 , Ear Buds(100) , Tuberculin Syringe , Nrbm Mask , Tablet Pappaya Extract(Platisis) , Anti T.B Drugs 3Fdc(150 Mg Rifampicin, 75 Mg Isoniazid,And 275 Mg Ethambutol. ) , Anti T.B Drugs 4Fdc(150 Mg Rifampicin, 75 Mg Isoniazid, 400 Mg Pyrazinamide And 275 Mg Ethambutol. ) , Central Line Triple Lumen With Y Needle And Nitinol Guide Wire 7Fr To 8.5 Fr With 15Cm To 20Cm Catheter With Tecoflex/Polyurathane Material , Central Line Quadra Lumen 8.5 Fr With 15Cm / 20Cm Catheter , Romodrain Bag
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
13.
Health and Family Welfare #8983271 Technical Bid
Tender For Supply Of Generic Drugs - 1 Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg 4Ml Amp ( 10 Ampoules ) 2 Bupivacaine Inj Ip 0.5% 20 Ml Vial 3 Halothane Bp 250 Ml In Amber Colour Bottle 4 Isoflurane Usp 100 Ml Bottle 5 Ketamine Inj Ip 50 Mg / Ml 10 Ml Vial 6 Lignocaine Ointment 5 O / O 10 Gm Tube In Unit Carton 7 Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg 30 Ml Vial 8 Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg Rc Not Exists ( Each ) 9 Lignocaine Gel Ip 2% 30Gm Tube In A Unit Carton 10 Lignocaine Inj Ip 2 O / O 30 Ml Vial 11 Propofol Inj Ip 10 Mg / Ml 20 Ml Vial / Ampoule 12 Thiopentone Inj Ip 0.5 G Vial 13 Sevoflurane 250 Ml Bottle 14 Atropine Sulphate Injection 0.6Mg / Ml 1Ml Amp 25 Ampoules 15 Liquid Medical Oxygen ( Lmo ) Rc Not Exists 16 Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) 3 Ml Amp ( 10 Amp ) 17 Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) 10X10 Tab Strip / Blister 18 Fentanyl Citrate Injection Ip 2 Ml 2 Ml Amp 10 Ampoules 19 Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg 10X10 Tab Blister 20 Ibuprofen Tab Ip 200 Mg ( Coated ) 10X10 Tab Blister 21 Ibuprofen Tab Ip 400 Mg ( Coated ) Rc Not Exists ( 10X10 ) 22 Morphine Sulphate Inj Ip 10Mg / Ml 1 Ml 10 Ampoules 23 Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) 15 Ml Bottle ( With Dropper Which Should Be Able To Screw And Cap The Bottle ) In A Unit Carton 24 Paracetamol Syrup Ip 125 Mg / 5Ml ( Detail In Rc ) 60 Ml Bottle ( With Measuring Cap ) 25 Paracetamol Tab Ip 500 Mg 10X10 Tab Blister 26 Paracetamol Inj. 150 Mg / Ml 2 Ml Amp 50 Ampoules 27 Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) 1Ml Amp 25 Ampoules 28 Tramadol Cap Ip 50 Mg 10X10 Cap Strip / Blister 29 Tramadol Inj 50 Mg / Ml 2 Ml Amp 10 Ampoules 30 Indomethacin Cap Ip 25 Mg 10X10 Cap Strip 31 Diclofence Prolonged Release Tablet Ip 100 Mg 10X10 Tab Strip 32 Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml 60 Ml Bottle ( With Measuring Cap ) 33 Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg 10 X 10 Tab 34 Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg 10 X 10 Tab 35 Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% 20 Gm Tube In Unit Carton 36 Etoricoxib Tab Ip 120Mg 10X10 Tab Blister 37 Mefenamic Acid Tablets Bp 500 Mg 10X10 Tablets 38 Fentanyl Citrate Injection 50Mcg / Ml 10Ml Vial / Amp 39 Naproxen Tablet Ip 500Mg 10X10 Tab Blister 40 Naproxen Tablet Ip 250Mg 10X10 Tab Blister 41 Etoricoxib Tablet Ip 90 Mg 10X10 Tablets 42 Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg 14X10 Tablet 43 Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size Rc Not Exists ( Each Amplue ) 44 Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use 1 Ml. Ampoule 45 Paracetamol Infusion Ip 1% W / V 100Ml Size 100 Ml Bottle 46 Ketorolac Tromethamine Dispersible Tablet 10 Mg ( Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg ) 10X10 Tablets 47 Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) 10X10 Tablets 48 Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) 10X10 Tablets 49 Adrenaline Injection Ip 1Mg / Ml Im / Iv Use 1Ml Amp ( Ambercolor ) 25 Amp 50 Betamethasone Tab Ip 0.5Mg 10X10 Tab Blister 51 Chlorpheniramine Maleate Tab Ip 4Mg 10X10 Tab 52 Dexamethasone Inj Ip 8Mg / 2Ml Rc Not Exists ( Each Amplue ) 53 Dexamethasone Tab Ip 0.5 Mg 10X10 Tab Strip 54 Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) Each Vial 55 Hydroxyzine Tab Ip 25 Mg 10X10 Tab Strip / Blister 56 Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg Vial 57 Pheniramine Inj Ip 22.75Mg / Ml 2 Ml Amp 25 Ampoules 58 Prednisolone Tab Ip 5 Mg 10X10 Tab Strip / Blister 59 Promethazine Syrup Ip 5 Mg / 5Ml 60 Ml Bottle ( With Measuring Cap ) 60 Promethazine Inj Ip 25Mg / Ml 2 Ml Amp ( Amber Color ) ( 10 Ampoules ) 61 Promethazine Tab Ip 25 Mg 10X10 Tab Stri 62 Betamethasone Sod Phos Inj Ip 4Mg / Ml 1 Ml Ampoule / Vial 63 Prednisolone Tablet Ip 10 Mg 10X10 Tab Strip / Blister 64 Prednisolone Tab Ip 20 Mg 10X10 Tab Strip / Blister 65 Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg 30 Ml Bottle With Measuring Cap 66 Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab Rc Not Exists ( 10 X 10 Tab ) 67 Cetirizine Syrup Ip 5Mg / 5 Ml 30 Ml Bottle With Measuring Cap 68 Levoceitrizine Tablet 5Mg 10X10 Tablets 69 Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) 10X10 Tablet Blister / Strip / Alu-Alu Pack 70 Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) 10X10 Tablets 71 Naloxone Inj Ip 0.4Mg / Ml 1 Ml 10 Ampoules 72 Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg Vial 73 Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml Rc Not Exists ( Each Amplue ) 74 Carbamazepine Tab Ip 200 Mg 10X10 Tab Strip / Blister 75 Carbamazepine Tab Ip 100 Mg 10X10 Tab Strip / Blister 76 Phenobarbitone Tab Ip 30 Mg 10X10 Tab Strip 77 Phenytoin Injection Bp 50Mg / Ml 2 Ml Amp ( Amber Colour ) ( 25 Ampoules ) 78 Phenytoin Oral Suspension Ip 25Mg / Ml 100 Ml Glass Bottle With Measuring Cap 79 Phenytoin Tab Ip 100 Mg ( Film Coated ) 10X10 Tab Strip 80 Sodium Valproate Inj 100 Mg / Ml Rc Not Exists ( Each Amplue ) 81 Sodium Valproate Gastro Resistant Tablets Ip 200 Mg 10X10 Tab Strip 82 Phenobarbitone Inj Ip 200Mg / Ml 1 Ml Ampoule / Vial 83 Carbamazepine Oral Suspension Usp 100 Mg / 5Ml 100 Ml Bottle ( With Measuring Cap ) 84 Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml 100 Ml Bottle ( With Measuring Cap ) 85 Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg 10X10 Tab Strip 86 Clobazam Tablet / Capsule 5 Mg 10X10 Tablet / Capsule Blister 87 Clobazam Tablet / Capsule 10 Mg 10X10 Tablet / Capsule Blister 88 Levetiracetam Tablet Ip 500 Mg 10X10 Tab Blister 89 Levetiracetam Oral Solution / Suspension 100Mg / Ml 100Ml 90 Levetiracetam Injection 500Mg / 5Ml Vial 91 Gabapentine Tablet / Capsule 100Mg 10X10 Tablet / Capsule Blister / Strip 92 Gabapentine Tablet / Capsule 300Mg 10X10 Tablet / Capsule Blister / Strip 93 Lamotrigine Tablet Ip 50 Mg ( Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg ) Rc Not Exists ( 10X 10 Tab ) 94 Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) 10X10 Tablets 95 Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) 10X10 Tablets 96 Lacosamide Tablet 100 Mg ( Each Film Coated Tablet Contains Lacosamide 100 Mg ) 10X10 Tablets 97 Topiramate Tablet Ip 25 Mg ( Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) 10X10 Tablets 98 Acyclovir Oral Suspension Ip 400Mg / 5Ml 60 Ml Bottle ( With Measuring Cap ) 99 Acyclovir Tab Ip 200 Mg 10X10 Tab Blister 100 Acyclovir Tab Ip 800 Mg 10X10 Tab Strip 101 Albendazole Oral Suspension Ip 400 Mg / 10Ml 10 Ml Bottle 102 Albendazole Tablets Ip 400 Mg ( Detail In Rc ) 10*10*1 Tablet Strip / Blister 103 Amikacin Inj Ip 100 Mg 2 Ml Vial 104 Amikacin Inj Ip 500 Mg 2 Ml Vial 105 Amoxycillin And Cloxacillin Cap 250 + 250 Mg 10X10 Cap Strip 106 Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg Rc Not Exists ( 10X10 Tab ) 107 Amoxycillin Cap Ip 250Mg 10X10 Cap Strip / Blister 108 Amoxycillin Cap Ip 500Mg 10X10 Cap Strip / Blister 109 Amoxycillin Dispersible Tablets Ip 125 Mg 10X10 Tab Strip 110 Amphotericin B Inj Ip 50 Mg Vial 111 Ampicillin Injection Ip 500 Mg Vial 112 Azithromycin Tab 100 Mg Dispersible Tabs ( 3 Tab Strip 10X3x3 ) 10X3x3 Tab Strip / Blister ( Strip / Blister Of 3 Tab ) 113 Azithromycin Tablets Ip 250Mg 10X3x3 Tab Strip / Blister ( Strip / Blister Of 3 Tab ) 114 Azithromycin Tab Ip 500 Mg 10X3x3 Tab Strip / Blister ( Strip / Blister Of 3 Tab ) 115 Benzathine Benzylpenicillin Inj Ip 12 Lac Units Vial 116 Benzathine Benzylpenicillin Inj Ip 6 Lac Units Vial 117 Cefixime Tab Ip 100 Mg 10X10 Tab Strip 118 Cefixime Tab Ip 200 Mg 10X10 Tab Strip 119 Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) Rc Not Exists ( ( Each Vial ) 120 Cefotaxime Injection Ip 1 G Rc Not Exists ( Each Vial ) 121 Cefotaxime Inj Ip 250 Mg Vial 122 Ceftazidime Inj Ip 1G Vial 123 Ceftazidime Inj Ip 250 Mg Vial 124 Ceftazidime Inj Ip 500 Mg Vial 125 Ceftriaxone Inj Ip 1G / Vial Vial ( Packed In Monocarton ) 126 Ceftriaxone Inj Ip 250 Mg / Vial Vial ( Amber Colour ) 127 Ceftriaxone Inj Ip 500Mg / Vial Vial ( Packed In Monocarton ) 128 Cephalexin Cap Ip 250 Mg 10X10 Cap Blister 129 Cephalexin Cap Ip 500 Mg 10X10 Cap Blister 130 Chloroquine Phosphate Inj Ip 40 Mg / Ml 5 Ml Amp ( 25 Amp ) 131 Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated 10X10 Tab Strip / Blister 132 Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml 60 Ml Bottle ( With Measuring Cap ) 133 Ciprofloxacin Injection Ip 200Mg / 100Ml 100 Ml Ffs / Bfs Bottle 134 Ciprofloxacin Tablets Ip 250 Mg Film Coated 10X10 Tab Blister 135 Ciprofloxacin Tablet Ip 500 Mg Film Coated Rc Not Exists 136 Clotrimazole Cream Ip 2% W / W 15Gm Tube In A Unit Carton 137 Clotrimazole Vaginal Tab Ip 500Mg Single Tablet ( 10 Tabs With An Applicator ) 138 Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg 50 Ml Bottle ( With Measuring Cap ) 139 Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg 10X10 Tab Blister 140 Diethylcarbamazine Tab Ip 100 Mg 10X10 Tab Blister 141 Doxycycline Cap Ip 100 Mg 10X10 Cap Strip / Blister 142 Fluconazole Tablets Ip 150Mg 10*10*1 Tab Strip ( Perforated ) 143 Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) 2 Ml Amp 50 Ampoules 144 Griseofulvin Tab Ip 125 Mg Rc Not Exists ( 10X10 Tab ) 145 Itraconazole Cap 100 Mg 10X4 Cap Strip 146 Meropenem Inj Ip 500 Mg Rc Not Exists ( Each Amplue ) 147 Metronidazole Inj Ip 500 Mg / 100Ml 100 Ml Ffs / Bfs Bottle 148 Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml 60 Ml Bottle ( Amber Colour ) With Measuring Cap 149 Metronidazole Tablets Ip 200 Mg ( Film Coated ) 10X10 Tab Blister 150 Metronidazoletablets Ip 400 Mg ( Film Coated ) Rc Not Exists ( 10X10 Tab ) 151 Norfloxacin Tab Ip 400Mg Film Coated 10X10 Tab Blister 152 Ofloxacin Tab Ip 200 Mg 10X10 Tab Blister 153 Primaquine Tab Ip 2.5 Mg 10X10 Tab Strip / Blister 154 Primaquine Tab Ip 7.5 Mg 10X10 Tab Strip / Blister 155 Quinine Dihydrochloride Inj Ip 300 Mg / Ml 2 Ml Amp 25 Ampoules 156 Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) 10X10 Tab Blister 157 Ampicillin Cap Ip 500Mg 10X10 Cap Blister 158 Nitrofurantoin Tab Ip 100Mg 10X10 Tab Blister 159 Cloxacillin Sodium Inj Ip 500Mg Vial 160 Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml 30 Ml Bottle With Measuring Cap 161 Ofloxacin Oral Suspension Ip 50Mg / 5Ml 30 Ml. Bottle 162 Tinidazole Tab Ip 300 Mg ( Film Coated ) 10X10 Tab Blister 163 Tinidazole Tab Ip 500 Mg ( Film Coated ) 10X10 Tab Blister 164 Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg Vial 165 Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml 30 Ml Bottle With Measuring Cap 166 Cefpodoxime Dispersible Tab 50 Mg 10X10 Tab Strip 167 Cephalexin Tablets 125 Mg ( Dispersible Tablets ) 10X10 Tab Strip 168 Meropenem Inj. Ip 1Gm Rc Not Exists ( Each Amplue ) 169 Acyclovir Intravenous Infusion Ip 250Mg Vial 170 Acyclovir Intravenous Infusion Ip 500Mg Rc Not Exists Vial 171 Amikacin Inj Ip 250 Mg Vial 172 Amoxicillin And Potassium Clavulanic Ip Inj 600Mg 10 Ml Vial 173 Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm Vial 174 Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) 30 Ml Bottle With Measuring Cap 175 Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) Each Combo Pack In A Unit Carton 176 Aztreonam Injection Usp 500 Mg Vial 177 Cefepime Injection Ip 500 Mg Vial 178 Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) 10 Ml Bottle ( With Dropper Which Should Be Able To Screw And Cap The Bottle ) In A Unit Carton 179 Cefuroxime Axetil Tab Ip 250 Mg 10X10 Tab Strip 180 Clindamycin Capsule Ip 150Mg 10X10 Cap Strip / Blister 181 Clindamycin Capsule Ip 300 Mg 10X10 Cap Strip / Blister 182 Levofloxacin Tablets Ip 250 Mg 10X10 Tab Blister 183 Linezolid Tablets Ip 600 Mg 10X10 Tablets 184 Linezolid Inj 200Mg / 100Ml 100Ml 185 Mefloquine Tablets Ip 250 Mg 10X6 Tablet Blister 186 Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg 10X10 Tab Blister 187 Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) 100 Ml Bottle 188 Vancomycin For Intravenous Infusion Ip 500 Mg Vial 189 Vancomycin For Intravenous Infusion Ip 1 Gm Vial 190 Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) 1X6 Tablet Blister 191 Co-Trimoxazole Tablet Ip ( Trimethoprim160mg+Sulphamethoxazole 800Mg ) Rc Not Exists 10X10 Tab 192 Aztreonam Injection 1Gm Vial 193 Framycetin Sulphate Cream 1 O / O 30Gm Pack 30Gm Pack 194 Framycetin Sulphate Cream 1 O / O 100 Gm Pack 100Gm Pack 195 Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) 1X6 Tablet Blister 196 Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg 10X10 Tablets 197 Piperacillin Injection 2 Gm + Tazobactom 250Mg Ip Rc Not Exists Per Vial 198 Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection Rc Not Exists Per Vial 199 Cefadroxil Dispersible Tablet 250 Mg ( Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg ) 10X10 Tablets 200 Cefadroxil Tablet 500 Mg Rc Not Exists 10X10 Tab 201 Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size Rc Not Exists Each Bottal 202 Levofloxacin Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) 10X10 Tablets 203 Faropenem Tablet Sodium 200 Mg ( Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg ) 10X10 Tablets 204 Clindamycin Phosphate Injection Ip 300 Mg Vial / Ampoules 205 Imipenem + Cilastatin Injection 500Mg / 500Mg Ip Powder For Solution Vial 206 Polymixin Sulphate B Injection Usp 5 Lac I.U. Vial 207 Meropenem Injection Ip 250 Mg Rc Not Exists ( Each Amplue ) 208 Colistimethate Injection Ip 1M Iu Powder For Solution Vial 209 Voriconazole Injection 200Mg / Vial Vial 210 Terbinafine Hydrochloride Tablet 250 Mg 10X10 Tablets 211 Valganciclovir Tablet 450 Mg Rc Not Exists 10X10 Tab 212 Entecavir Tablet Ip 0.5 Mg ( Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg ) 10X10 Tablets 213 Ganciclovir Sodium Injection 500Mg ( Lyophilized Powder For Reconstitution ) Vial 214 Azathioprine Tab Ip 50 Mg 10X10 Tab Strip 215 Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) Vial 216 Chlorambucil Tab Ip 5 Mg Rc Not Exists 10X10 Tab 217 Cisplatin Inj Ip 50 Mg / 50 Ml 50 Ml Vial 218 Cyclophosphamide Inj Ip 200 Mg 10 Ml Glass Vial 219 Cyclophosphamide Inj Ip 500 Mg 25Ml Glass Vial 220 Cytarabine Injection Bp 500Mg Rc Not Exists ( Each Amplue ) 221 Danazol Cap Ip 50 Mg 10X10 Cap Blister 222 Daunorubicin Inj Ip 20 Mg 10 Ml Glass Vial 223 Doxorubicin Inj Ip 50 Mg / 25 Ml Vial 224 Etoposide Inj Ip 100 Mg 5 Ml Glass Vial 225 Fluorouracil Inj Ip 250 Mg / 5Ml 5 Ml Ampoule 226 L-Asparaginase Inj 10000 Iu Vial 227 Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml 5 Ml Vial 228 Melphalan Tab Ip 5 Mg Rc Not Exists 10X10 Tab 229 Mercaptopurine Tab Ip 50 Mg 10X10 Tab Strip 230 Methotrexate Inj Ip 50 Mg / 2 Ml Rc Not Exists ( Each Amplue ) 231 Methotrexate Tab Ip 2.5 Mg 10X10 Tab Strip 232 Paclitaxel Inj Ip 260 Mg 43.4 Ml Vial 233 Paclitaxel Inj Ip 100 Mg 16.7 Ml Vial 234 Tamoxifen Tab Ip 10 Mg 10X10 Tab Strip 235 Vinblastine Inj Ip 10Mg / 10Ml Vial 236 Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) Vial / Ampoules 237 Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit Vial 238 Carboplatin Injection Ip 150 Mg15 Ml Vial 239 Carboplatin Injection Ip 450 Mg45 Ml Vial 240 Cisplatin Inj Ip 10 Mg / 10 Ml10 Ml Vial 241 Dacarbazine Injection 500 Mg Usp / Bp Rc Not Exists ( Each Amplue ) 242 Filgrastim Injection Ip ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcgpre Filled Syringe / Vial 243 Gemcitabine For Injection 200 Mgvial 244 Gemcitabine For Injection Ip 1Gmvial 245 Ifosfamide Injection Ip / Bp / Usp 1Gmvial 246 Imatinib Tab Ip 400Mg10x10 Caps / Tab 247 Methotrexate Tablets Ip 10 Mg10x10 Tab Strip 248 Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mgrc Not Exists ( Each Amplue ) 249 Oxaliplatin Injection Usp 50 Mg25 Ml Vial 250 Cyclosporin Capsule Usp / Ip 50 Mg50 Caps Pack 251 Procarbazine Hydrochloride Capsule Usp 50 Mg ( Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg ) Rc Not Exists ( Each Amplue ) 252 Bendamustine Injection 100 Mgvial 253 Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) 10X10 Tablets 254 Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) 10X10 Tablets 255 Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg ) Strip Of 5 Cap / Bottele Of 5 Cap 256 Bortezomib Injection 2Mgvial 257 Abiraterone Acetate Tablet Ip 250 Mg ( Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg ) Bottle Of 30 Tablets 258 Lomustine Capsule Ip 40 Mg ( Each Capsule Contains Lomustine Ip 40 Mg ) Rc Not Exists 10X10 Capsule 259 Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) Rc Not Exists 10X10 Cap. 260 Bevacizumab Injection 400 Mgvial 261 Bevacizumab Injection 100 Mgvial 262 Cyclophosphamide Tablet Ip 50 Mg ( Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg ) 10X10 Tablets 263 Gefitinib Tablet Ip 250 Mg ( Each Film Coated Tablet Contains Gefitinib Ip 250 Mg ) 10X10 Tablets 264 Mycophenolate Mofetil Capsule / Tablets Ip 250 Mg ( Each Capsule / Tablets Conatin Mycophenolate Mofetil Ip 250 Mg ) 10X10 Caps / Tab 265 Tacrolimus Capsule Ip 0.5 Mg ( Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg ) 10 X 10 Capsule 266 Mycophenolate Sodium Tablet 360 Mg ( Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg ) 10X10 Tablets 267 Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) Rc Not Exists 10X10 Tab 268 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) Rc Not Exists 10X10 Tab 269 Zoledronic Acid Injection Ip 4Mg Vialvial 270 Dasatinib Tab 100 Mg60 Tablet 271 Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mgrc Not Exists 10X10 Tab 272 Levodopa And Carbidopa Tab 250 Mg+ 25 Mg10x10 Tab Strip 273 Trihexyphenidyl Hcl Tab Ip 2 Mg10x10 Tab Blister 274 Bromocriptine Tablets Ip 2.5 Mg10x10 Tab Strip 275 Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg10x10 Tab Strip 276 Deferasirox Tab 100 Mg30 Tablets 277 Deferasirox Tab 500 Mg30 Tablets 278 Deferiprone Cap 250 Mg50 Caps 279 Deferiprone Cap 500 Mg50 Caps 280 Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) Vial 281 Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) Vial With Diluent 282 Enoxaparin Sodium Inj Ip 60 Mgvial / Pfs 283 Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) 2 Ml Amp 10 Ampoules 284 Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) Rc Not Exists ( Each Amplue ) 285 Human Albumin Solution Ip 20%100 Ml Bottle 286 Rh-Erythropoetin Inj Ip 10000 Iuvial / Pfs 287 Rh-Erythropoetin Inj Ip 2000Iuvial / Pfs 288 Rh-Erythropoetin Inj 4000 Iuvial / Pfs 289 Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) 1Ml Amp ( Ambercolor ) 25 Amp 290 Polygeline 3.5% Solution With Electrolytes For I.V. Infusionrc Not Exists Per Bottol 291 Factor Ix Concentrate ( Purified ) Ip 500-600 I.U. ( Human Coagulation Factor Ix ) 500 Iu Vial With Solvent 292 Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial ) Vial With 20Ml Solvant 293 Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion500 Ml Plastic Bottle / 500 Ml Free Flex 294 Tranexamic Acid Tablets Ip 500 Mg10x6 Tablet Blister 295 Warfarin Sodium. Tab Ip 5Mg10x10 Tablets 296 Vitamin K-1 ( Phytomenadione ) Ip 1Mg / 0.5Ml Injection ( Detail In Rc ) Each Pack Along With Syringe In A Unit Carton 297 Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vialvial With Diluent 298 Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vialvial With Diluent 299 Recombinant Coagulation Factor Viia 1Mgvial 300 Recombinant Coagulation Factor Viia 2Mgvial 301 N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Sizerc Not Exists ( Each Amplue ) 302 Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) Rc Not Exists 303 Feracrylum 1% W / V Sterile Solution 100 Ml100ml 304 Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size5ml Vial / Amp 305 Recombinant F Ix 500 Iu With Diluentvial With Diluent 306 3Rd Generation Recombinant F Viii 250 Iu With Diluentvial With Diluent 307 3Rd Generation Recombinant F Viii 1000 Iu With Diluentvial With Diluent 308 Amiodarone Tab Ip 100 Mg10x10 Tablets 309 Amiodarone Tab Ip 200 Mg10x10 Tab Strip 310 Amiodarone Hydrochloride Inj 50 Mg / Ml3 Ml Amp ( 10 Amp ) 311 Amlodipine Tab Ip 2.5 Mg10x10 Tab Strip / Blister 312 Amlodipine Tablets Ip 5 Mg10x10 Tab Blister 313 Atenolol Tab Ip 50 Mg10x14 Tab Blister 314 Atorvastatin Tab Ip 10Mg10x10 Tab Strip / Blister 315 Clopidogrel Tab Ip 75 Mg10x10 Tab Strip 316 Digoxin Inj Ip 0.25 Mg / Mlrc Not Exists ( Each Amplue ) 317 Digoxin Tab Ip 0.25 Mg.10X10 Tab Strip 318 Diltiazem Tabs Ip 30 Mg Film Coated10x10 Tab Blister 319 Dobutamine Inj Ip 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Ip 250 Mg / 5Ml ( Amp ) 10 Vial / Amp 320 Dopamine Hydrochloride Inj Ip 40 Mg / Ml5 Ml Amp ( Amber Colour ) 25 Ampo 321 Enalapril Maleate Tab Ip 5Mg10x10 Tab Strip 322 Enalapril Maleate Tab Ip 2.5Mg10x10 Tab Strip 323 Isosorbide Dinitrate Tab Ip 5 Mg10x10 Tab Blister 324 Isosorbide Mononitrate Tabs Ip 20 Mg10x10 Tab Strip 325 Lisinopril Tab Ip 5 Mgrc Not Exists 10X10 Tab 326 Losartan Tab Ip 50 Mg10x10 Tab Strip 327 Magnesium Sulphate Inj. Ip 500Mg / Ml ( 50%W / V ) 2 Ml Amp 25 Ampoules 328 Methyldopa Tab Ip 250Mg Film Coatedrc Not Exists 10X10 Tab 329 Nifedipine Cap Ip 5Mg10x10 Cap Strip 330 Nifedipine Tablets Ip 10 Mg ( Sustained Release ) 10X10 Tab Blister 331 Nitroglycerin Inj 5 Mg / Ml5 Ml Amp ( 10 Ampoules ) 332 Propranolol Tab Ip 40 Mg10x10 Tab Strip / Blister 333 Streptokinase Injection 15 Lac Units Ipvial 334 Verapamil Tab Ip 40 Mg Film Coated10x10 Tab Strip 335 Labetalol Tab Ip 100Mg10x10 Tab Blister 336 Labetalol Hcl Inj Ip 20Mg / 4Ml4 Ml Ampules 337 Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) 10X14 Tab Strips 338 Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) 10X10 Tab Strip 339 Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) 10X10 Tab Strip / Blister 340 Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) 10X10 Tab Blister 341 Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg10x10 Tab Strip / Blister 342 Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) 10X10 Tab Blister 343 Atenolol Tab Ip 25 Mg10x14 Tab Blister 344 Enalapril Maleate Tablets Ip 10 Mg10x10 Tab Strip 345 Lisinopril Tablets Ip 10 Mg10x10 Tab Strip / Blister 346 Lisinopril Tab Ip 2.5 Mg10x10 Tab Strip / Blister 347 Losartan Tab Ip 25 Mg10x10 Tab Blister 348 Adenosine Injection Ip 6 Mg / 2Ml2ml Vial / Ampoule 349 Atorvastatin Tablets Ip 40 Mg10x10 Tablets 350 Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg10x10 Tab Strip 351 Fenofibrate Capsules / Tab Ip 200 Mgrc Not Exists 10X10 Cap 352 Isoprenaline Injection Ip 2Mg / Mlrc Not Exists ( Each Amplue ) 353 Metoprolol Tablets Ip 25 Mg10x10 Tablets 354 Metoprolol Succinate Extended Release Tablets Ip 50 Mg10x10 Tablets 355 Noradrenaline Injection Ip 2 Mg / Ml2ml Vial / Ampoule 356 Prazosin Tablets ( Extended Release ) 2.5 Mgrc Not Exists 10X10 Tab 357 Telmisartan Tablets Ip 40 Mg10x10 Tablets 358 Urokinase Injection 5 Lac Unit ( Lyophilized ) Rc Not Exists ( Each Amplue ) 359 Ramipril Tablets Ip 2.5 Mg10x10 Tablets 360 Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets30 Tab Bottles 361 Clonidine Hydrochloride Tablet Ip 0.1 Mg ( Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg ) 10X10 Tablets 362 Sotalol Hydrochloride Tablet Usp / Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40Mg ) 10X10 Tablets 363 Esmolol Hydrochloride Injection 10Mg / Ml 10Ml Size10 Ml Vial 364 Sodium Nitroprusside Injection 25Mg / Ml 2Ml Size2ml Vial / Ampoule 365 Carvedilol Tablet 3.125 Mg10x10 Tablets 366 Rosuvastatin Tablet Ip 20 Mg ( Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg ) 10X10 Tablets 367 Rosuvastatin Tablet 10 Mg10x10 Tablets 368 Sacubitril 24 Mg And Valsartan 26 Mg Tablet14x2 Tablets 369 Chlorhexidine Mouthwash Ip 0.2 O / O50 Ml Bottle 370 Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) 10 Gm Tube 371 Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) 50 Gm Tube In Unit Carton 372 Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1%15 Ml Squeeze Vial 373 Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel10 Gm Tube In Unit Carton 374 Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O15gm Tube In Mono Carton 375 Acyclovir Cream 5%5 Gm Tube In Unit Carton 376 Cetrimide Cream Ip 15 Gm15gm Tube In A Unit Carton 377 Fusidic Acid Cream Ip 2%10Gm Tube In Mono Carton 378 Glycerin Ip 400 Gmrc Not Exists Per Bottal 379 Liquid Paraffin Ip 400 Ml400 Ml Bottle 380 Miconazole Nitrate Cream Ip 2%15Gm Tube In A Unit Carton 381 Povidone Iodine Ointment 5% 15 Gm15gm Tube In A Unit Carton 382 Neomycin Bacitracin And Sulphacetamide Powder ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) 10 Gm Plastic Bottle With Nozzle To Sprinkle Powder 383 Silver Sulphadiazine Cream Ip 1% 50Gm Tube50 Gm Tube 384 Gentian Violet Topical Solution Usp 1O / O200 Ml Bottle 385 Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) 15 Ml Squeeze Bottle 386 Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) 10 Gm Tube In Unit Carton 387 Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) 100 Ml Bottle 388 Betamethasone Dipropionate Cream Ip 0.05%15Gm Tube In A Unit Carton 389 Betamethasone Lotion Ip 0.05 O / Orc Not Exists ( Each Vial ) 390 Clindamycin Phosphate Gel Usp 1 O / O20gm Tube In Mono Carton 391 Clobetasol Propionate Cream Ip 0.05 O / O20 Gm Tube 392 Glycerin Ip 100 Mlrc Not Exists Each Bottal 393 Ketoconazole Cream 2%15Gm Tube In Mono Carton 394 Permethrin Lotion 5%30 Ml 395 Permethrin Cream 5%30Gm Tube In A Unit Carton 396 Tretenoin Cream Usp 0.025%20 Gm Tube In Unit Carton 397 Coal Tar 6% & Salicylic Acid 3% Ointment20gm 398 Calamine Lotion Ip 100Ml100 Ml Bottle 399 Powder Clotrimazole 1% W / W 30 Gm30 Gm Bottle 400 Terbinafine Cream 1%W / W ( 10 Gm Tube ) 10 Gm Tube 401 Olopatadine Hydrochloride Ophthalmic Solution 0.1% W / V Ip ( E / D ) 5Ml Size5ml Bottle 402 Oitment Mupirocin Ip 2%5 Gm Tube 403 Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) 10 Ml Vial 404 Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) 10 Ml Vial 405 Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip10 Ml Vial 406 Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) 20 Ml Vial / Ampoule 407 Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) 20 Ml Ampoule 408 Gadodiamide Inj. 0.5Mml / Ml Vial10 Ml Vial 409 Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit100-Test Kits 410 Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml20 Ml Pack 411 Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml.Rc Not Exists ( Each Amplue ) 412 Multistix Test Striprc Not Exists 1X100 413 Povidone Iodine Solution Ip 5 % 500 Ml500 Ml Bottle 414 Compound Benzoin Tincture Ip500 Ml Bottle 415 Formaldehyde Solution ( 34.5 Per. - 38 Per. ) Rc Not Exists Each Bottal 416 Gluteraldehyde Solution 2%5 Ltrs Can 417 Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) Rc Not Exists Each Bottal 418 Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) 5 Ltrs Can 419 Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) 500 Ml Bottle 420 Surgical Spirit Ip ( 500 Ml ) 500 Ml Opaque White Bottle With Inner Cap 421 Chlorhexidine Gluconate Solution 5% 250 Ml250 Ml Bottle 422 Surgical Spirit Ip ( 100 Ml ) 100Ml Opaque White Bottle With Inner Cap 423 Povidone Iodine Solution Ip 5% 100Ml Bottle100 Ml Bottle 424 Povidone Iodine Ointment Usp 250 Gm250 Gm Pack 425 Povidone Iodine Solution Ip 10 %100 Ml Bottle 426 Silver Sulphadiazine Cream Ip 1% 500 Gm Jar500 Gm Jar 427 Acetazolamide Tab Ip 250Mg10x10 Tab Blister 428 Frusemide Tab Ip 40 Mg10x10 Tab Strip 429 Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) 2 Ml Ampoule 430 Hydrochlorthiazide Tab Ip 12.5 Mg10x10 Tab Strip 431 Mannitol Inj Ip 20% W / V100 Ml Ffs / Bfs Bottle 432 Spironolactone Tab Ip 25Mg10x10 Tab Blister 433 Torsemide Tab 10 Ip Mg10x10 Tab Strip / Blister 434 Hydrochlorthiazide Tab Ip 25Mg10x10 Tab Strip 435 Torsemide Inj 10 Mg / Mlrc Not Exists ( Each Amplue ) 436 Spironolactone Tablets Ip 50 Mg10x10 Tablets 437 Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp5 Ml. Vial With Sterilized Dropper, Or Squeeze Vial 438 Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops5 Ml Ear Drops 439 Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp5 Ml Vial / Bottle With A Seperate Dropper 440 Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O10 Ml Bottle ( With Dropper Which Should Be Able To Screw And Cap The Bottle ) In A Unit Carton 441 Drotaverine Hydrochloride Inj 40 Mg / 2 Ml2 Ml Amp 10 Ampoules 442 Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O15gm Tube In A Unit Carton 443 Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil10x10 Tab Blister 444 Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg60 Ml Bottle ( With Measuring Cap ) 445 Bisacodyl Tab Ip 5 Mg10x10 Tab Strip 446 Dicyclomine Tab Ip 10 Mg10x10 Tab Strip / Blister 447 Dicyclomine Inj Ip 10 Mg / Ml2 Ml Amp 25 Ampoules 448 Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml30 Ml Bottle With Measuring Cap 449 Domperidone Suspension Ip 5Mg / 5Ml30 Ml Bottle With Measuring Cap 450 Domperidone Tab Ip 10 Mg10x10 Tab Blister 451 Hyoscine Butylbromide Inj Ip 20 Mg / Ml1ml Amp 25 Ampoules 452 Loperamide Tab Ip 2 Mg10x10 Tab Strip 453 Metoclopramide Inj Ip 10Mg / 2Ml2 Ml Amp ( Amber Colour ) ( 25 Ampoules ) 454 Metoclopramide Tab Ip 10 Mg10x10 Tab Blister 455 Omeprazole Cap Ip 20 Mg10x10 Cap Strip / Blister 456 Ondansetron Inj Ip 2Mg / Ml2 Ml Amp 10 Ampoules 457 Ors Powder Iprc Not Exists Each Packit 458 Pentoprazole Inj 40 Mgvial 459 Ranitidine Hcl Injection Ip 50Mg / 2Ml2 Ml Amp ( Amber Colour ) ( 25 Ampoules ) 460 Ranitidine Tab Ip 150Mg Film Coatedrc Not Exists 10X10 Tab 461 Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O100 Ml Polypropylene Pack 462 Hyoscine Butyl Bromide Tablets Ip 10Mg10x10 Tab Blister 463 Drotaverine Tab Ip 40 Mg10x10 Tab Blister 464 Ranitidine Tab Ip 300Mg Film Coatedrc Not Exists 10X10 Tab 465 Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg10 Ml Bottle ( With Dropper Which Should Be Able To Screw And Cap The Bottle ) In A Unit Carton 466 Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets10x10 Tab Blister 467 Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml30 Ml Bottle ( With A Seperate Dropper Which Should Be Able To Screw & Cap The Bottle ) In Unit Carton 468 Domperidone Oral Drops 10Mg / Ml ( 10Ml ) 10 Ml Bottle ( With Dropper Which Should Be Able To Screw And Cap The Bottle ) In A Unit Carton 469 Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg10x10 Tablets 470 Lactic Acid Bacillus Tab 60 Million Spores10x10 Tablets 471 Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml100 Ml Bottle ( With Measuring Cap ) 472 Liquid Paraffin Ip 100 Ml100 Ml Bottle 473 Ondansetron Orally Disintegrating Tablets Ip 4Mg10x10 Tab Strip 474 Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets10x10 Cap Strip 475 Ursodeoxycholic Acid Tablets Ip 300 Mg10x10 Tab Strip / Blister 476 Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) 10X10 Tablets 477 Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Sizerc Not Exists ( Each Amplue ) 478 Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) 1 Gm Each Sachet 479 Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) 10X10 Tablets 480 Allopurinol Tablets Ip 100 Mg10x10 Tablets 481 Hydroxychloroquine Sulphate Tablets 200Mg10x10 Tablets 482 Leflunomide Tablets Ip 10Mg ( Film Coated ) 10X10 Tablets 483 Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) 10X10 Tablets 484 Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip10x10 Tablets 485 Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) 10 Ml Vial 486 Carbimazole Tabs Ip 5 Mg ( Film Coated ) 10X10 Tab Blister 487 Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg / Ml1 Ml Amp / Vials ( 25 Ampoule / Vial ) 488 Clomifene Tab Ip 25 Mg10x10 Tab Strip 489 Clomiphene Tab Ip 50 Mg10x10 Tab Strip 490 Conjugated Estrogen Tabs Usp 0.625 Mg.Rc Not Exists 10X10 Tab 491 Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringesyringe 492 Ethinyloestradiol Tabs Ip 50 Mcg10x10 Tab Strip 493 Glibenclamide Tab Ip 5 Mg10x10 Tab Strip / Blister 494 Gliclazide Tab Ip 40 Mg10x10 Tab Strip / Blister 495 Glimepiride Tab Ip 2 Mg10x10 Tab Strip / Blister 496 Glimepiride Tab Ip 1Mg10x10 Tab Strip / Blister 497 Glipizide Tab Ip 5Mg10x10 Tab Blister 498 Hydroxyprogesterone Inj Ip 250Mg / Ml1ml Amp 25 Ampoules 499 Isophane Insulin Inj Ip 40 Iu / Ml10 Ml Vial 500 Metformin Tab Ip 500 Mg ( Film Coated ) 10X10 Tab Blister 501 Norethisterone Tab Ip 5 Mg10x10 Tab Strip 502 Pioglitazone Tab Ip 15 Mg10x10 Tab Blister 503 Progesterone Inj 200 Mg / 2Ml2 Ml Amp 10 Ampoules 504 Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) 10 Ml Vial 505 Thyroxine Sodium Tablets Ip 100Mcg100 Tablet In A Bottle 506 Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg10x10 Tab Blister 507 Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) 10X10 Tab Blister 508 Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) Rc Not Exists 10X10 Tab 509 Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg10x10 Tab Blister 510 Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets Ip ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) 10X10 Tab Blister 511 Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg10x10 Tab Blister 512 Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) 10X10 Tablets 513 Glucagon For Injection Usp 1 Mg / Mlvial 514 Medroxyprogesterone Acetate Tablets Ip 10 Mg10x10 Tablets 515 Thyroxine Tablets Ip 50 Mcg100 Tablet In A Bottle Or 10X10 Tablet 516 Octreotide Injection 50 Mcg / Ml1 Ml. Ampoule 517 Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges3ml Vial 518 Tenaligliptin Tablet Ip 20Mg10x10 Tablet Blister / Alu-Alu Pack 519 Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle10 Ml Vial 520 Group Name ( 1 ) :: 20. Immunologicals Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) Pre Filled Syringe / Vial 521 Human Anti D Immunoglobulin 150 Mcgpre Filled Syringe / Vial 522 Human Rabies Immunoglobulin Inj 150 Iu / Mlrc Not Exists ( Each Amplue ) 523 Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu1 Ml Vial With 1.0 Ml Diluent 524 Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dosesingle Dose Vial With Diluent And Syringe With Needle 525 Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) Vial 526 Tetanus Immunoglobulin Ip 250 Iu / Vialvial / Ampoules 527 Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vialrc Not Exists 528 Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) 5 Ml Vial 529 Diphtheria Antitoxin 10000 Iuvial 530 Hepatitis B Immunologlobin Injection Ip 200 I.Uvial / Pfs 531 Human Immunoglobulin Inj With 12%Igm, 12%Iga, 76%Igg In Pack Of 10Ml ( 0.5Gm ) 10Ml Vial ( 0.5Gm ) 532 Atracurium Inj 10 Mg / Ml2.5 Ml Amp ( 10 Ampoules ) 533 Glycopyrrolate Inj Ip 0.2 Mg / Ml1 Ml Amp ( 10 Amp ) 534 Midazolam Inj Ip 1 Mg / Ml5 Ml Vial 535 Neostigmine Inj Ip 0.5 Mg / Ml1 Ml 10 Ampoules 536 Neostigmine Tab Ip 15 Mgrc Not Exists10x10 Tab 537 Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) 10 Ml Vial 538 Valethamate Bromide Inj 8Mg / Mlrc Not Exists ( Each Amplue ) 539 Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) Rc Not Exists ( Each Amplue ) 540 Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) Rc Not Exists 10X10 Tab 541 Neostigmine Injection Ip 2.5Mg / 5Ml5 Ml Amp ( 10 Ampoules ) 542 Cis Atracurium Besylate Injection 2 Mg / Ml In 5 Ml Vial5 Ml Vial 543 Tropicamide Eye Drop Ip 1O / O5 Ml. Vial With Sterilized Dropper, Or Squeeze Vial 544 Atropine Eye Ointment Ip 1%Rc Not Exists Each Vial 545 Atropine Sulphate Ophthalmic Solution Usp 1%5 Ml. Vial With Sterilized Dropper, Or Squeeze Vial 546 Chloramphenicol Eye Drops Ip 0.5 0 / 05 Ml. Vial With Sterilized Dropper, Or Squeeze Vial 547 Ciprofloxacin Eye Drops Ip 0.3 O / O W / V5 Ml Squeeze Vial 548 Ciprofloxacin Ophthalmic Ointment Usp 0.3%5 Gm Tube In Unit Carton 549 Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml2ml Glass Syringe ( With Cannula ) 550 Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O5ml Vial With Sterilized Dropper Packed In Seperate Polythene Pack 551 Tobramycin Eye Drops 0.3% [ 331 ] 5 Ml. Vial With Sterilized Dropper, Or Squeeze Vial 552 Tobramycin Ophthalmic Ointment Usp 0.3%Rc Not Exists One Nos 553 Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V5 Ml Squeeze Vial 554 Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U.Vial 555 Lidocaine Hcl Topical Solution Usp 4%Rc Not Exists Each Bottal 556 Fluconazole Eye Drops 0.3%5 Ml. Vial With Sterilized Dropper, Or Squeeze Vial 557 Timolol Eye Drops Ip 0.5 O / O W / V5 Ml Squeeze Vial 558 Homatropine Eye Drops Ip 2%5 Ml Squeeze Vial 559 Travoprost Eye Drops Ip 0.004 O / O3 Ml Squeeze Vial 560 Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5%5 Ml Squeeze Vial 561 Betaxolol Eye Drops 0.5 O / Orc Not Exists Each Vial 562 Carboxymethylcellulose Eye Drops Ip 0.5%10 Ml Squeeze Vial 563 Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5%Rc Not Exists Each Vial 564 Acyclovir Eye Ointment Ip 3% W / W 5Gm Size5 Gm Tube 565 Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size5 Ml. Vial With Sterilized Dropper, Or Squeeze Vial 566 Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Sizerc Not Exists Per Nos 567 Isoxsuprine Inj Ip 5 Mg / Mlrc Not Exists ( Each Amplue ) 568 Isoxsuprine Tab Ip 20 Mg10x10 Tab Strip 569 Methylergometrine Inj Ip 0.2 Mg / Ml1ml Amp ( Ambercolor ) 25 Amp 570 Methylergometrine Tab Ip 0.125 Mg10x10 Tab Strip 571 Misoprostol Tab Ip 200 Mcg10x10 Tablets 572 Oxytocin Inj Ip 5 Iu / Ml1 Ml Ampoule ( Single Unit In Blister Pack ) 573 Mifepristone Tab Ip 200Mgsingle Tablet 574 Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) / Natural Micronised Progesteron Tablet 200 Mg ( Each Tablet Contains Progesteron Ip 200 Mg ) 10X10 Tablet / Capsule Blister / Strip 575 Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) 10X10 Tablets 576 Human Chorionic Gonadotropin Injection Ip 5000 I.U.Vial 577 Leurprolide Acetate Depot 3.75 Mgvial 578 Leurprolide Acetate Depot 11.25 Mgvial 579 Alprazolam Tab Ip 0.25 Mg10x10 Tab Strip / Blister 580 Alprazolam Tab Ip 0.5Mg10x10 Tab Strip / Blister 581 Amitriptyline Tab Ip 25Mg Film Coated10x10 Tab Strip 582 Chlordiazepoxide Tablets Ip 10Mg10x10 Tab Strip 583 Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) 10X10 Tab Strip 584 Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) 10X10 Tab Strip 585 Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) 10X10 Tab Strip 586 Chlorpromazine Inj. Ip 25Mg / Mlrc Not Exists ( Each Amplue ) 587 Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) Rc Not Exists ( Each Amplue ) 588 Diazepam Tab Ip 5 Mg10x10 Tab Strip / Blister 589 Escitalopram Tab Ip 10 Mg10x10 Tab Strip / Blister 590 Fluoxetine Cap Ip 20 Mg10x10 Cap Strip / Blister 591 Haloperidol Inj Ip 5 Mg / Ml1 Ml Amp ( 10 Amp ) 592 Haloperidol Tab Ip 1.5 Mg10x10 Tab Strip 593 Haloperidol Tab Ip 5 Mg10x10 Tab Strip 594 Imipramine Tab Ip 25 Mg ( Coated Tab ) Rc Not Exists 10X10 Tab 595 Imipramine Tab Ip 75 Mg ( Coated ) 10X10 Tab Blister 596 Lithium Carbonate Tab Ip 300 Mg10x10 Tab Strip 597 Lorazepam Inj Ip 2 Mg / Ml2 Ml Amp 25 Ampoules 598 Olanzapine Tab Ip 5 Mg10x10 Tab Strip 599 Risperidone Tab 2Mg10x10 Tab Strip / Blister 600 Risperidone Tab 1 Mg10x10 Tab Strip / Blister 601 Sertraline Tab Ip 50 Mg10x10 Tab Strip / Blister 602 Trifluperazine Tab Ip 5 Mg Coated10x10 Tab Strip / Blister 603 Quetiapine Tablet Ip 50Mg10x10 Tab Blister 604 Quetiapine Tablet Ip 25Mg10x10 Tab Blister 605 Clonazepam Tablet 0.5 Mg10x10 Tablets 606 Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) 10X10 Tablets 607 Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) 10X10 Tablets 608 Zolpidem Tablet 5 Mg10x10 Tablets 609 Aminophylline Inj Ip 25 Mg / Ml10 Ml Amp 25 Ampoules 610 Beclomethasone Inhalation Ip 200 Mcg / Dose200metered Dose Container 611 Budesonide Nebulizer Suspension 0.25Mg / Ml2 Ml Amp 10 Ampoules 612 Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S.50 Ml Bottle ( With Measuring Cap ) 613 Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml15 Ml Glass Bottle 614 Salbutamol Tablet Ip 4 Mg10x10 Tab Strip / Blister 615 Salbutamol Inhalation 100 Mcg / Dose200metered Dose Container 616 Salbutamol Nebuliser Solution Bp 5 Mg / Ml10 Ml Vial 617 Salbutamol Tab Ip 2 Mg10x10 Tab Strip / Blister 618 Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) 2 Ml Amp 25 Ampoules 619 Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) Rc Not Exists 10X10 Tab 620 Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) Rc Not Exists 10X10 Tab 621 Salbutamol Syrup Ip 2Mg / 5Ml100 Ml Bottle ( With Measuring Cap ) 622 Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml30 Ml. Bottle 623 Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) 10 Ml Bottle With Dropper / Squeeze Bottle 624 Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg30 Capsules 625 Budesonide Powder For Inhalation 200 Mcg30 Capsules 626 Ipratropium Powder For Inhalation Ip 40 Mcg30 Capsule ( Rota Caps ) 627 Terbutaline Tablets Ip 2.5 Mg10x10 Tablets 628 Xylometazoline Nasal Drops Ip 0.1%5Ml Vial / Bottle ( With A Seperate Dropper ) In A Unit Carton 629 Cough Syrup / Expectorant ( 50 ) Ml50 Ml Bottle ( With Measuring Cap ) 630 Acebrophylline Tablet / Capsule 100 Mg10x10 Tablets 631 Compound Sodium Lactate Inj. Ip500 Ml Ffs / Bfs Bottle 632 Dextrose Inj Ip 25% W / V100 Ml Ffs / Bfs Bottle 633 Dextrose Inj Ip 10%500 Ml Ffs / Bfs Bottle 634 Dextrose Inj Ip 5%500 Ml Ffs / Bfs Bottle 635 Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection ) 500 Ml Ffs / Bfs Bottle 636 Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) 500 Ml Ffs / Bfs Bottle 637 Potassium Chloride Inj. 0.15 Gm / Ml10 Ml Amp 10 Ampoules 638 Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml200ml Bottle ( Amber Color ) 639 Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O500 Ml Ffs / Bfs Bottle 640 Sodium Chloride Inj Ip 500 Ml500 Ml Ffs / Bfs Bottle 641 Sodium Chloride Injection Ip 100 Ml100 Ml Bottle 642 Ringer Acetate Infusion 500 Ml500 Ml Bottle 643 Sodium Chloride 0.45% W / V Polypack 500 Ml500 Ml Bottle 644 Finasteride Tablets Ip 5 Mg10x10 Tab Strip / Blister 645 Tamsulosin Hcl Tablets / Capsule 0.4 Mg10x10 Tablet / Cap Strip 646 Flavoxate Tablets Ip 200 Mg ( Coated Tablet ) 10X10 Tablets 647 Savelamer Carbonate Tablet 400 Mg ( Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg ) 10X10 Tablets 648 Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) 10X10 Tablets 649 Levamisol Hydrochloride Tablet Ip 50 Mg ( Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg ) 10X10 Tablets 650 Phenazopyridine Tablet 5 Mgrc Not Exists 10X10 Tab 651 Dutasteride Tablet 0.5 Mg10x10 Tablets 652 Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) Rc Not Exists Each Bottal 653 Betahistine Tab Ip 8 Mg10x10 Tablets 654 Betahistine Tab Ip 16 Mg10x10 Tablets 655 Cinnarizine Tablets Ip 25 Mg10x10 Tab Blister 656 Cinnarizine Tablet Ip 75 Mg10x10 Tab Blister 657 Ascorbic Acid Tab Ip 500 Mg10x10 Tab Strip 658 Calcium Gluconate Inj Ip 10% ( Iv Use ) Rc Not Exists ( Each Amplue ) 659 Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg10x10 Tab Strip / Blister 660 Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg10x10 Tab Strip / Blister 661 Folic Acid Tab Ip 5 Mg10x10 Tab Blister 662 Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg15 Ml Bottle ( With Dropper Which Should Be Able To Screw And Cap The Bottle ) In A Unit Carton 663 Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg10x10 Tab Strip / Blister 664 Vitamin B Complex Inj Nfi10 Ml Vial 665 Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) 10X10 Tab Strip / Blister 666 Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu100 Ml Bottle And Spoon With Marking 1 Ml / 2Ml In Unit Carton 667 Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) 100 Ml Bottle ( With Measuring Cap ) 668 Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg100 Ml Bottle In A Unit Carton With A Separate Dropper ( Details In Rc ) 669 Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg10x10 Tab Strip / Blister 670 Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg5 Ml Ampoule ( Amber Colour ) 671 Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) 10X10 Tablets 672 Cholecalciferol Granules 60, 000 Iu / Gm1 Gm Sachet ( 50 Sachets ) 673 Mecobalamin Inj 500 Mcg / Ml1 Ml. Ampoule 674 Pyridoxine Tablet Ip 10 Mgrc Not Exists 675 Pyridoxine Tablet Ip 40Mg10x10 Tab Strip 676 Thiamine Tablets Ip 100 Mg10x10 Tab Strip 677 Calcitriol Capsules Ip 0.25 Mcg10x10 Cap Strip / Blister 678 Methyl Cobalmine Tablet 500Mcg10x10 Tab Strip / Blister 679 Methyl Cobalmine Tablet 1500Mcg10x10 Tab Strip / Blister 680 Vitamin D3 Oral Solution 60000 Iu5ml Glass Bottle In Unit Carton 681 Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size10 Ml Vial 682 Multi Vitamin Syruprc Not Exists Each Bottal 683 Flunarizine Tab 5 Mg10x10 Tab Blister 684 Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii5 Ltrs Can 685 Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Canrc Not Exists Each Bottal 686 Peritonial Dialysis Solution Ip1000 Ml Ffs / Bfs Pack 687 Sodium Bicarbonate Inj Ip 7.5% W / V10 Ml Amp 25 Ampoules 688 Water For Inj Ip Rc Not Exists ( Each Amplue ) 689 Alendronate Sodium Tablets Usp / Bp 35 Mg4 Tablets ( 20 *4Tablet ) 690 Mannitol With Glycerin Injection 10 O / O + 10 O / O W / V ( For Intravenous Infusion ) 100 Ml Ffs / Bfs Bottle 691 Normal Human Intravenous Immunoglobulin 5G / 100Ml100 Ml Vial 692 Pregabalin Cap Ip 75 Mg10 X 10 Capsule 693 Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) 4Ml Vial 694 Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cansrc Not Exists Each Bottal 695 Intravenous Fat Emulsion 20% W / V 250Ml250 Ml Bottle 696 Pyridostigmine Tablet Ip 60 Mg ( Each Tablet Contains Pyridostigmine Ip 60 Mg ) 10X10 Tablets 697 Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size3ml Vial 698 Amino Acid 10% Injection 100Ml Size100 Ml Bottle 699 Vitamin E Capsule 400 Mg10x10 Cap Strip / Blister 700 Inj Poractant Alpha 80 Mg / Ml In Pack Of 1.5 Ml ( Detail In Rc ) 1.5Ml Vial 701 Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) Strip / Blister Of 10 Capsule 702 Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) Strip / Blister Of 10 Capsule 703 Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) Strip / Blister Of 10 Capsule 704 Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) 75 Ml Bottle With Measuring Cap 705 Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) Rc Not Exists Each Bottal 706 Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) One Combi Blister Pack 707 Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) One Combi Blister Pack 708 Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) One Combi Blister Pack 709 Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) One Combi Blister Pack 710 Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mgone Combi Blister Pack 711 Liposomol Amphotericine Injection B 50Mgvial 712 Drug Name ( 4 ) Packing Unit ( 12 ) 713 Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 01X12 Foils 714 Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 01X12 Foils 715 Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 01X12 Foils 716 Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 01X12 Foils 717 Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 01X12 Foils 718 Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 01X12 Foils 719 Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-11X12 Foils 720 Absorbable Surgical Suture ( Sterile Catgut ) , Needled Suture Chromic Size-3 / 0 ( 3 / 8 Cir Rcutting Needle 26Mm, Length 76 Cm ) 1X12 Foils 721 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm1x12 Foils 722 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm1x12 Foils 723 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm1x12 Foils 724 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm1x12 Foils 725 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm1x12 Foils 726 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed1x12 Foils 727 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) 1X12 Foils 728 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm1x12 Foils 729 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) 1X12 Foils 730 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm1x12 Foils 731 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm1x12 Foils 732 Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 ( Details In Rc ) 1X12 Foils 733 Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 ( Details In Rc ) Rc Not Exists Per Nos 734 Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 ( Details In Rc ) 1X12 Foils Per Nos 735 Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) 1X12 Foils 736 Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) 1X12 Foils 737 Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) 1X12 Foils 738 Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) 1X12 Foils 739 Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) 1X12 Foils 740 Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 4 / 0 ( 3 / 8 Conventional Cutting Needle 19Mm Length 60 Cm. ) 1X12 Foils 741 Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 5 / 0 ( 3 / 8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm ) 1X12 Foils 742 Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) 1X12 Foils 743 Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) 1X12 Foils 744 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb 13 Mm Needle, Length 75Cm ) Double Arm1x12 Foils 745 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue ( 3 / 8Cir Rb 16 Mm Needle, Length 90 Cm ) Size 6 / 01X12 Foils 746 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 7 / 0 ( 3 / 8Cir Rb Double 8Mm Needle, Length 60 Cm ) 1X12 Foils 747 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) 1X12 Foils 748 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) 1X12 Foils 749 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) 1X12 Foils 750 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb Double Needle 17Mm Length 90 Cm ) ( Detail In Rc ) 1X12 Foils 751 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Tapercut Double Needle 17Mm Length 70 Cm ) ( Detail In Rc ) 1X12 Foils 752 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm1x12 Foils 753 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) 1X12 Foils 754 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Tapercut Needle 17Mm Length 75 Cm ) Double Arm1x12 Foils 755 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Tapercut Needle, 25 Mm Length 90 Cm ) Double Arm1x12 Foils 756 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm ) 1X12 Foils 757 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm1x12 Foils 758 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Rb Needle 16 Mm Length 70 Cm ) 1X12 Foils 759 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) 1X12 Foils 760 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) 1X12 Foils 761 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm ) 1X12 Foils 762 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 8 / 0 ( 3 / 8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm ) 1X12 Foils 763 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Circle Tapercut 13Mm Double Needle 70Cm ) 1X12 Foils 764 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Circle Cc 13Mm Needle, Suture Length Of 70Cm ) Double Arm1x12 Foils 765 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm ) Double Arm1x12 Foils 766 Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Suture Length Of 75Cm ) Double Arm1x12 Foils 767 Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 4 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 75 Cm ) Rc Not Exists Per Packit 768 Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) 1X12 Foils 769 Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) ( Detail In Rc ) 1X12 Foils 770 Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2 / 0 1 / 2 Circle Taper Cut, 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm1x6 Foils 771 Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2-0 1 / 2 Circle Taper Cut, 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm1x6 Foils 772 Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green / White Or Blue / White Coated Polyster Braided ( Green / Blue ) With Size 3 / 0 1 / 2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm1x12 Foils 773 Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 10 / 0 ( 3 / 8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm1x12 Foils 774 B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 ( Details In Rc ) 1X12 Foils 775 B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 ( Details In Rc ) 1X12 Foils 776 Absorbable Surgical Sutures, Sterilised Needled Polyglecaprone / Polyglyconate, Monofilament Sutures Size 2 / 0 ( 1 / 2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm ) 1X12 Foils 777 Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate, Size 3 / 0 ( 1 / 2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm ) 1X12 Foils 778 Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 4 / 0 ( 1 / 2 Circle Cutting 16Mm Needle, Suture Length 70Cm ) 1X12 Foils 779 Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) 1X12 Foils 780 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 ( 1 / 2 Circle Reverse Cutting 50 Mm Length 90Cm ) 1X12 Foils 781 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2 / 0 ( 1 / 2 Circle Rb 31Mm Needle, Length 70Cm ) 1X36 Foils 782 Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) 1X12 Foils 783 Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm1x12 Foils 784 Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm1x12 Foils 785 Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm1x12 Foils 786 Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm1x12 Foils 787 Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm1x12 Foils 788 Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm1x12 Foils 789 Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm1x12 Foils 790 Absorbable Gelatin Sponge 80 X 50X 10Mm ( Details In Rc ) Piece 791 Asepto Syringe With Transparent Bulb Sterile, 60 Ml Rc Not Exists 792 Blood Administration Set Blood Transfusion Set ( Details In Rc ) Unit 793 Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) Pair 794 Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) Pair 795 Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) Pair 796 Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) Pair 797 Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) Pair 798 Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) ( Details In Rc ) Pair 799 Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc ) Each Piece 800 Suction Catheter, Sterile. Size: F G-6 ( Details In Rc ) Each Piece 801 Suction Catheter, Sterile. Size: F G-8 ( Details In Rc ) Each Piece 802 Suction Catheter, Sterile. Size: F G-10 ( Details In Rc ) Each Piece 803 Suction Catheter, Sterile. Size: F G-12 ( Details In Rc ) Each Piece 804 Suction Catheter, Sterile. Size: F G-14 ( Details In Rc ) Each Piece 805 Suction Catheter, Sterile. Size: F G-16 ( Details In Rc ) Each Piece 806 Suction Catheter, Sterile. Size: F G-18 ( Details In Rc ) Each Piece 807 Suction Catheter, Sterile. Size: F G-20 ( Details In Rc ) Each Piece 808 Suction Catheter, Sterile. Size: F G-22 ( Details In Rc ) Each Piece 809 Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) Each Piece 810 Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) Each Piece 811 Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) Each Piece 812 Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) Each Piece 813 Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) Each Piece 814 Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) Each Piece 815 Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) Each Piece 816 Infant Feeding Tube Size 10Fg ( Details In Rc ) Each Piece 817 Infant Feeding Tube Size 8Fg ( Details In Rc ) Each Piece 818 Infant Feeding Tube Size 5Fg ( Details In Rc ) Each Piece 819 Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable ( Details In Rc ) Unit 820 Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable ( Details In Rc ) Unit 821 Infusion Set With Microdrip, ( I.V. ) Sterile Disposable ( Details In Rc ) Unit 822 Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227Unit 823 Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G ( Details In Rc ) Each Piece 824 Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G ( Details In Rc ) Each Piece 825 Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G ( Details In Rc ) Each Piece 826 Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G ( Details In Rc ) Each Piece 827 Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc ) Each Piece 828 Mucus Extractor Sterile ( Details In Rc ) Unit 829 Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc ) Each Piece 830 Nasal Oxygen Set, Twin Bore All Sizes Paediatrics ( Details In Rc ) Each Piece 831 Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tapeunit 832 Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tapeunit 833 Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tapeunit 834 Plaster Of Paris Bandage 15Cm X 2.7 Mts / Rollunit 835 Plaster Of Paris Bandage 10Cm X 2.7Mtsunit 836 Ryles Tube / Nasogastric Tube Size: 10 ( Details In Rc ) Each Piece 837 Ryles Tube / Nasogastric Tube Size: 12 ( Details In Rc ) Each Piece 838 Ryles Tube / Nasogastric Tube Size:14 ( Details In Rc ) Each Piece 839 Ryles Tube / Nasogastric Tube Size: 16 ( Details In Rc ) Each Piece 840 Ryles Tube / Nasogastric Tube Size: 18 ( Details In Rc ) Each Piece 841 Scalp Vein Set ( Disposable ) Size 18G ( Details In Rc ) Each Piece 842 Scalp Vein Set ( Disposable ) Size 20G ( Details In Rc ) Each Piece 843 Scalp Vein Set ( Disposable ) Size 22G ( Details In Rc ) Each Piece 844 Scalp Vein Set ( Disposable ) Size 24 G ( Details In Rc ) Each Piece 845 Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) Unit 846 Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) Unit 847 Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) Unit 848 Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) Unit 849 Surgical Blade Sterile, Size 11 ( Details In Rc ) 100 Blades / Packet 850 Surgical Blade Sterile, Size 15 ( Details In Rc ) 100 Blades / Packet 851 Surgical Blade Sterile, Size 22 ( Details In Rc ) 100 Blades / Packet 852 Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 ( Details In Rc ) Rc Not Exists Per Packit 853 Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 ( Details In Rc ) Rc Not Exists Per Packit 854 Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 ( Details In Rc ) Rc Not Exists Per Packit 855 Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 ( Details In Rc ) Rc Not Exists Per Packit 856 Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 ( Details In Rc ) Rc Not Exists Per Packit 857 Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 ( Details In Rc ) Rc Not Exists Per Packit 858 Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 ( Details In Rc ) Rc Not Exists Per Packit 859 Suture Needles Curved And Cutting Size 1-5 ( Details In Rc ) Rc Not Exists Per Packit 860 Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch ( Details In Rc ) Each Piece 861 Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch ( Details In Rc ) Each Piece 862 Urine Collecting Bag, Disposable 2000 Ml ( Details In Rc ) Rc Not Exists Per Nos 863 Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cmrc Not Exists 864 Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cmrc Not Exists 865 Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cmrc Not Exists 866 Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cmrc Not Exists 867 Endotracheal Tube, Plain - Size 2.5 ( Details In Rc ) Each Piece 868 Endotracheal Tube, Plain - Size 3 ( Details In Rc ) Each Piece 869 Endotracheal Tube, Plain - Size 3.5 ( Details In Rc ) Each Piece 870 Endotracheal Tube, Plain - Size 4 ( Details In Rc ) Each Piece 871 Endotracheal Tube, Plain - Size 4.5 ( Details In Rc ) Each Piece 872 Endotracheal Tube, Plain - Size 5 ( Details In Rc ) Each Piece 873 Endotracheal Tube, Plain - Size 5.5 ( Details In Rc ) Each Piece 874 Endotracheal Tube, Plain - Size 6 ( Details In Rc ) Each Piece 875 Endotracheal Tube, Plain -Size 6.5 ( Details In Rc ) Each Piece 876 Endotracheal Tube, Plain - Size 7 ( Details In Rc ) Each Piece 877 Endotracheal Tube, Plain - Size 7.5 ( Details In Rc ) Each Piece 878 Endotracheal Tube, Plain - Size 8 ( Details In Rc ) Rc Not Exists Each Nos 879 Endotracheal Tube, Plain - Size 8.5 ( Details In Rc ) Each Piece 880 Endotracheal Tube, Cuffed - Size 4 ( Details In Rc ) Each Piece 881 Endotracheal Tube, Cuff - Size 4.5 ( Details In Rc ) Each Piece 882 Endotracheal Tube, Cuff - Size 5 Details In Rceach Piece 883 Endotracheal Tube, Cuff - Size 6 ( Details In Rc ) Each Piece 884 Endotracheal Tube, Cuff- Size 6.5 ( Details In Rc ) Each Piece 885 Endotracheal Tube, Cuff - Size 7 ( Details In Rc ) Each Piece 886 Endotracheal Tube, Cuff - Size 7.5 ( Details In Rc ) Each Piece 887 Endotracheal Tube, Cuff - Size 8 ( Details In Rc ) Each Piece 888 Endotracheal Tube, Cuff - Size 8.5 ( Details In Rc ) Each Piece 889 Endotracheal Tube, Cuff - Size 9 ( Details In Rc ) Each Piece 890 Tracheostomy Tube, Plain - All Sizes ( Details In Rc ) Each Piece 891 Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes ( Details In Rc ) Each Piece 892 Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc ) Each Piece 893 Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 ( Details In Rc ) Each Piece 894 Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 ( Details In Rc ) Each Piece 895 Corrugated Drainage Sheet - All Sizes ( Details In Rc ) Rc Not Exists Per Packit 896 Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cmpiece 897 Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm Piece 898 Bone Wax Sterilised 2.5 Gram / Packet 899 Temporary Cardiac Pacing Wire ( Electrode ) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mmrc Not Exists 900 Skin Graft Knife Blade ( Sterile ) ( Details In Rc ) One Pack Each 901 K Wire, Length 375 Mm; 1Mm ( Details In Rc ) Rc Not Exists 902 K Wire, Length 375 Mm; 1.6Mm ( Details In Rc ) Rc Not Exists 903 K Wire, Length 375 Mm; 1.8Mm ( Details In Rc ) Rc Not Exists 904 Face Mask, Disposable ( Details In Rc ) Piece 905 Surgical Cap Disposable ( For Surgeons ) ( Details In Rc ) Piece 906 Surgical Cap, Disposable ( For Nurses ) ( Details In Rc ) ( Details In Rc ) Piece 907 Foldable Intra Ocular Lense With Injector ( Details In Rc ) 11 To 17.5Each Piece 908 Foldable Intra Ocular Lense With Injector ( Details In Rc ) 18 To 24Each Piece 909 Foldable Intra Ocular Lense With Injector ( Details In Rc ) 24.5 To 28.5Each Piece 910 Standard Pama Intra Ocular Lenses ( Details In Rc ) 11 To 17.5Each Piece 911 Standard Pama Intra Ocular Lenses ( Details In Rc ) 18 To 24Each Piece 912 Standard Pama Intra Ocular Lenses ( Details In Rc ) 24.5 To 28.5Each Piece 913 Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powderedpair 914 Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Freepair 915 Rubber Examination Gloves, Non-Sterile, Extra Small ( Details In Rc ) Dispenser Box Of100 Gloves 916 Rubber Examination Gloves, Size Small ( Details In Rc ) Dispenser Box Of100 Gloves 917 Rubber Examination Gloves, Size Medium ( Details In Rc ) Dispenser Box Of100 Gloves 918 Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large ( Details In Rc ) Dispenser Box Of100 Gloves 919 Pressure Monitoring Line / High Pressure Extension Line ( Details In Rc ) Each Piece In Blister Pack 920 Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml ( Details In Rc ) Each Piece 921 Umbilical Catheter For New Born, All Sizes - ( Details In Rc ) Each Piece 922 Umbilical Cord Clamp ( Details In Rc ) Each Piece 923 Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property ( Details In Rc ) Rc Not Exists 924 Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 ( Details In Rc ) Each Piece 925 Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 ( Details In Rc ) Each Piece 926 T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- ( Details In Rc ) Rc Not Exists 927 Bone Cementrc Not Exists 928 Sanitary Napkin Beltless ( Details In Rc ) 6 Napkin / Pack 929 Sanitary Pads Belt Type ( Details In Rc ) 6 Napkin / Pack 930 Sanitary Napkin Beltless With Wings ( Details In Rc ) Rc Not Exists Per Packit 931 Oxygen Mask ( Adult ) Unit 932 Oxygen Mask ( Pediatric ) Unit 933 Foleys Catheter No. 14 ( Detail In Rc ) Each Piece 934 Nelaton Catheter Size 14 Fg ( Detail In Rc ) Each Piece 935 Ecg Electrode ( Detail In Rc ) Each Piece 936 Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 ( Detail In Rc ) Each Piece 937 Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml ( Detail In Rc ) Each Piece 938 Urethral Catheter 90 ( Fg-14 ) Made Up Of Medical Grade Pvc ( Detail In Rc ) Each Piece 939 Urethral Catheter 91 ( Fg-10 ) , Made Up Of Medical Grade Pvc ( Detail In Rc ) Each Piece 940 Vaccum Suction Set, 2.5 Meter Length ( Detail In Rc ) Each Piece 941 Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile ( Detail In Rc ) Each Piece 942 Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) Rc Not Exists Per Nos 943 Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) Each Piece 944 Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) Each Piece 945 Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) Each Piece 946 Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) Rc Not Exists Per Nos 947 Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) Rc Not Exists Per Nos 948 Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) Rc Not Exists Per Nos 949 Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) Rc Not Exists Per Nos 950 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements ( Detail In Rc ) Each Piece 951 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 10Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) Each Piece 952 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 50Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) Each Piece 953 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 100Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) Each Piece 954 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 150Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) Each Piece 955 Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) ( Detail In Rc ) Each Piece 956 Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) ( Detail In Rc ) Each Piece 957 Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) Each Piece 958 Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) Each Piece 959 Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G ( Detail In Rc ) Rc Not Exists Per Nos 960 Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Ventilator Without Vent ( Detail In Rc ) Each Piece 961 Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc ) Each Piece 962 Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent ( Detail In Rc ) Each Piece 963 Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Bipap With Vent ( Detail In Rc ) Each Piece 964 Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support ( Detail In Rc ) Each Piece 965 Nebulization Mask Adult ( Detail In Rc ) Each Piece 966 Nebulization Mask Paediatric ( Detail In Rc ) Each Piece 967 Chemotherapy Port And Non-Coring Needles ( Adult ) ( Detail In Rc ) Each Piece 968 Chemotherapy Port & Non-Coring Needles ( Pediatric ) ( Detail In Rc ) Each Piece 969 Cotton 500 Gm Ip ( Net Weight ) Each Piece 970 Cotton 200 Gm Ip ( Net Weight ) Each Piece
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Rajasthan View Result →
14.
Health and Family Welfare #8930148 Technical Bid
Drugs And Medicines Procure For Mg Hospital Sagwara , Medicine And Surgical Equipment : , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg , Acetazolamide Tab Ip 250Mg , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Acyclovir Cream 5% , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Acyclovir Oral Suspension Ip 400Mg / 5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Adenosine Injection 6 Mg / 2Ml , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use , Albendazole Oral Suspension Ip 400 Mg / 10Ml , Albendazole Tablets Ip 400 Mg ( Detail In Rc ) , Alendronate Sodium Tablets Usp / Bp 35 Mg , Allopurinol Tablets Ip 100 Mg , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amikacin Inj Ip 100 Mg , Amikacin Inj Ip 250 Mg , Amikacin Inj Ip 500 Mg , Aminophylline Inj Ip 25 Mg / Ml , Amiodarone Hydrochloride Inj 50 Mg / Ml , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amitriptyline Tab Ip 25Mg Film Coated , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mg , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml , Amphotericin B Inj Ip 50 Mg , Ampicillin Cap Ip 500Mg , Ampicillin Injection Ip 500 Mg , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial ) , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) , Ascorbic Acid Tab Ip 500 Mg , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg , Atenolol Tab Ip 25 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Atorvastatin Tablets Ip 40 Mg , Atracurium Inj 10 Mg / Ml , Atropine Eye Ointment Ip 1% , Atropine Sulphate Injection 0.6Mg / Ml , Atropine Sulphate Ophthalmic Solution Usp 1% , Azathioprine Tab Ip 50 Mg , Azithromycin Tab 100 Mg Dispersible Tabs , Azithromycin Tab Ip 500 Mg , Azithromycin Tablets Ip 250Mg , Aztreonam Injection 1Gm , Aztreonam Injection Usp 500 Mg , Beclomethasone Inhalation Ip 200 Mcg / Dose , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Betahistine Tab Ip 16 Mg , Betahistine Tab Ip 8 Mg , Betamethasone Dipropionate Cream Ip 0.05% , Betamethasone Lotion Ip 0.05 O / O , Betamethasone Sod Phos Inj Ip 4Mg / Ml , Betamethasone Tab Ip 0.5Mg , Betaxolol Eye Drops 0.5 O / O , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) , Bisacodyl Tab Ip 5 Mg , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Bromocriptine Tablets Ip 2.5 Mg , Budesonide Nebulizer Suspension 0.25Mg / Ml , Budesonide Powder For Inhalation 200 Mcg , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg , Bupivacaine Inj Ip 0.5% , Calamine Lotion Ip 100Ml , Calcitriol Capsules Ip 0.25 Mcg , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Calcium Gluconate Inj Ip 10% ( Iv Use ) , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml , Carbamazepine Tab Ip 100 Mg ( Film Coated ) , Carbamazepine Tab Ip 200 Mg ( Film Coated ) , Carbimazole Tabs Ip 5 Mg ( Film Coated ) , Carboplatin Injection 150 Mg , Carboplatin Injection 450 Mg , Carboprost Tromethamine Injection Each Ml Contains Carboprost 0.25 Mg / Ml , Carboxymethylcellulose Eye Drops 0.5% , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) , Cefotaxime Inj Ip 250 Mg , Cefotaxime Injection 1 G , Cefpodoxime Dispersible Tab 50 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G / Vial , Ceftriaxone Inj Ip 250 Mg / Vial , Ceftriaxone Inj Ip 500Mg / Vial , Cefuroxime Axetil Tab Ip 250 Mg , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O , Cetirizine Syrup Ip 5Mg / 5 Ml , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetrimide Cream Ip 15 Gm , Chlorambucil Tab Ip 5 Mg , Chloramphenicol Eye Drops Ip 0.5 0 / 0 , Chlordiazepoxide Tablets Ip 10Mg , Chlorhexidine Gluconate Solution 5% 250 Ml , Chlorhexidine Mouthwash Ip / Bp 0.2 O / O , Chloroquine Phosphate Inj Ip 40 Mg / Ml , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated , Chlorpheniramine Maleate Tab Ip 4Mg , Chlorpromazine Inj. Ip 25Mg / Ml , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) , Cholecalciferol Granules 60, 000 Iu / Gm , Cinnarizine Tablet Ip 75 Mg , Cinnarizine Tablets Ip 25 Mg , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp , Ciprofloxacin Eye Drops 0.3 O / O W / V , Ciprofloxacin Injection Ip 200Mg / 100Ml F-F-S Bottle , Ciprofloxacin Ophthalmic Ointment Usp 0.3% , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Cisplatin Inj Ip 10 Mg / 10 Ml , Cisplatin Inj Ip 50 Mg / 50 Ml , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Clindamycin Phosphate Gel Usp 1 O / O , Clobazam Tablet / Capsule 10 Mg , Clobazam Tablet / Capsule 5 Mg , Clobetasol Propionate Cream 0.05 O / O , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Clonazepam Tablet 0.5 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Clopidogrel Tab Ip 75 Mg , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops , Clotrimazole Cream Ip 2% W / W , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) , Clotrimazole Vaginal Tab Ip 500Mg , Cloxacillin Sodium Inj Ip 500Mg , Coal Tar 6% & Salicylic Acid 3% Ointment , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O , Compound Benzoin Tincture Ip , Compound Sodium Lactate Inj. Ip F-F-S Bottle , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Conjugated Estrogen Tabs Usp 0.625 Mg. , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Co-Trimoxazole Tablet ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Syp.Ambroxal15 Mg+Terbufaline 1.5 Mg+Menthol 1.25Mg+Glucogon 50 Mg , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cyclosporin Capsule Usp / Ip 50 Mg , Cytarabine Injection Bp 500Mg , Dacarbazine Injection 500 Mg Usp / Bp , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) , Dexamethasone Inj Ip 8Mg / 2Ml , Dexamethasone Tab Ip 0.5 Mg , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml , Dextrose Inj Ip 10% F-F-S Bottle 500 Ml , Dextrose Inj Ip 25% W / V F-F-S Bottle 100 Ml , Dextrose Inj Ip 5% F-F-S Bottle 500Ml , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) , Diazepam Tab Ip 5 Mg , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% , Diclofenac Sod + Paracetamol Tablets Diclofenac Sod 50 Mg + Paracetamol 325 Mg , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) , Diclofence Prolonged Release Tablet Ip 100 Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml , Dicyclomine Inj Ip 10 Mg / Ml , Dicyclomine Tab Ip 10 Mg , Diethylcarbamazine Tab Ip 100 Mg , Digoxin Inj Ip 0.25 Mg / Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe , Diphtheria Antitoxin 10000 Iu , Dobutamine Inj Ip / Bp 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Usp250 Mg / 5Ml ( Amp ) , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) , Domperidone Suspension Ip 5Mg / 5Ml 30 Ml , Domperidone Tab Ip 10 Mg , Dopamine Hydrochloride Inj 40 Mg / Ml , Doxorubicin Inj Ip 50 Mg / 25 Ml , Doxycycline Cap Ip 100 Mg , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml , Drotaverine Tab Ip 40 Mg , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg , Enalapril Maleate Tab Ip 2.5Mg , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tablets Ip 10 Mg , Enoxaparin Sodium Inj Ip 60 Mg , Escitalopram Tab Ip 10 Mg , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) , Ethinyloestradiol Tabs Ip 50 Mcg , Etoposide Inj Ip 100 Mg , Etoricoxib Tab Ip 120Mg , Etoricoxib Tablet 90 Mg , Factor Ix Concentrate ( Purified ) 600 I.U. ( Human Coagulation Factor Ix ) , Fenofibrate Capsules / Tab Ip 200 Mg , Fentanyl Citrate Injection 50Mcg / Ml , Fentanyl Citrate Injection Ip 2 Ml , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Filgrastim Injection ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcg , Finasteride Tablets Ip 5 Mg , Flavoxate Tablets Ip / Bp 200 Mg ( Coated Tablet ) , Fluconazole Eye Drops 0.3% , Fluconazole Tablets Ip 150Mg , Flunarizine Tab 5 Mg , Fluorouracil Inj Ip 250 Mg / 5Ml , Fluoxetine Cap Ip 20 Mg , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V , Folic Acid Tab Ip 5 Mg , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Framycetin Sulphate Cream 1 O / O 100 Gm Pack , Framycetin Sulphate Cream 1 O / O 30Gm Pack , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) , Fusidic Acid Cream Ip 2% , Gabapentine Tablet / Capsule 100Mg , Gabapentine Tablet / Capsule 300Mg , Gadodiamide Inj. 0.5Mml / Ml Vial , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) , Gemcitabine For Injection 1Gm , Gemcitabine For Injection 200 Mg , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) , Gentian Violet Topical Solution Usp 1O / O , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) , Glibenclamide Tab Ip 5 Mg , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 1Mg , Glimepiride Tab Ip 2 Mg , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) , Glipizide Tab Ip 5Mg , Glucagon For Injection Usp 1 Mg / Ml , Gluteraldehyde Solution 2% , Glycerin Ip 100 Ml , Glycerin Ip 400 Gm , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Glycopyrrolate Inj Usp 0.2 Mg / Ml , Griseofulvin Tab Ip 125 Mg , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% , Haloperidol Inj Ip 5 Mg / Ml , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Halothane Bp , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) , Homatropine Eye Drops Ip 2% , Human Albumin Solution Ip 20% , Human Anti D Immunoglobulin 150 Mcg , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) , Human Rabies Immunoglobulin Inj 150 Iu / Ml , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Hydrochlorthiazide Tab Ip 12.5 Mg , Hydrochlorthiazide Tab Ip 25Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) , Hydroxychloroquine Sulphate Tablets 200Mg , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion , Hydroxyprogesterone Inj Ip 250Mg / Ml , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml , Hydroxyzine Tab Ip 25 Mg , Hyoscine Butyl Bromide Tablets Ip 10Mg , Hyoscine Butylbromide Inj Ip 20 Mg / Ml , Ibuprofen And Paracetamol Tablets Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml , Ibuprofen Tab Ip 200 Mg ( Coated ) , Ibuprofen Tab Ip 400 Mg ( Coated ) , Ifosfamide Injection Usp / Bp 1Gm , Imatinib Tab 400Mg , Imipramine Tab Ip 25 Mg ( Coated Tab ) , Imipramine Tab Ip 75 Mg ( Coated ) , Indomethacin Cap Ip 25 Mg , Insulin Glargine 100Iu / Ml 3 Ml Vial , Insulin Glargine 100Iu / Ml 5Ml Vial , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml , Ipratropium Powder For Inhalation Ip 40 Mcg , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg , Isoflurane Usp , Isophane Insulin Inj Ip 40 Iu / Ml , Isoprenaline Injection Ip 2Mg / Ml , Isosorbide Dinitrate Tab Ip 5 Mg , Isosorbide Mononitrate Tabs Ip 20 Mg , Isoxsuprine Inj Ip 5 Mg / Ml , Isoxsuprine Tab Ip 20 Mg , Itraconazole Cap 100 Mg , Ketamine Inj Ip 50 Mg / Ml , Ketoconazole Cream 2% , Labetalol Hcl Inj Ip 20Mg / 4Ml , Labetalol Tab Ip 100Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml , L-Asparaginase Inj 10000 Iu , Leflunomide Tablets Ip / Usp 10Mg ( Film Coated ) , Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml , Levetiracetam Injection 500Mg / 5Ml , Levetiracetam Oral Suspension 100Mg / Ml , Levetiracetam Tablet 500 Mg , Levoceitrizine Tablet 5Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levofloxacin Tablets Ip 250 Mg , Lidocaine Hcl Topical Solution Usp 4% , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg , Lignocaine Gel Ip 2% , Lignocaine Inj Ip 2% , Lignocaine Ointment 5 O / O , Linezolid Inj 200Mg / 100Ml , Linezolid Tablets Ip 600 Mg , Liquid Paraffin Ip 100 Ml , Liquid Paraffin Ip 400 Ml , Lisinopril Tab Ip 2.5 Mg , Lisinopril Tab Ip 5 Mg , Lisinopril Tablets Ip 10 Mg , Lithium Carbonate Tab Ip 300 Mg , Loperamide Tab Ip 2 Mg , Lorazepam Inj 2 Mg / Ml , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) , Losartan Tab Ip 25 Mg , Losartan Tab Ip 50 Mg , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) , Magnesium Sulphate Inj. 50Mg / Ml ( 50%W / V ) , Mannitol Inj Ip 20% W / V , Mannitol With Glycerin Injection 10 O / O + 10 O / O W / V ( For Intravenous Infusion ) , Mecobalamin Inj 500 Mcg / Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Mefenamic Acid Tablets Bp 500 Mg , Mefloquine Tablets Ip 250 Mg , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Meropenem Inj Ip 500 Mg , Meropenem Inj. Ip 1Gm , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg , Metformin Tab Ip 500 Mg ( Film Coated ) , Methotrexate Inj Ip 50 Mg / 2 Ml , Methotrexate Tab Ip 2.5 Mg , Methotrexate Tablets Ip 10 Mg , Methyl Cobalmine Tablet 1500Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Methyldopa Tab Ip 250Mg Film Coated , Methylergometrine Inj Ip 0.2 Mg / Ml , Methylergometrine Tab Ip 0.125 Mg , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml , Metoclopramide Inj Ip 10Mg / 2Ml , Metoclopramide Tab Ip 10 Mg , Metoprolol Succinate Extended Release Tablets Ip / Usp 50 Mg , Metoprolol Tablets Ip 25 Mg , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel , Metronidazole And Norfloxacin Suspension 100 Mg + 100 Mg Per 5Ml , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml , Metronidazole Inj Ip 500 Mg / F-F-S Bottle 100 Ml , Metronidazole Tablets Ip 200 Mg ( Film Coated ) , Metronidazole Tablets Ip 400 Mg ( Film Coated ) , Miconazole Nitrate Cream Ip 2% , Midazolam Inj Ip 1 Mg / Ml , Mifepristone Tab Ip 200Mg , Misoprostol Tab Ip 200 Mcg , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) , Morphine Sulphate Inj Ip 10Mg / Ml , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection ) F-F-S Bottle 500 Ml , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) F-F-S Bottle 500 Ml , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Naloxone Inj Ip 0.4Mg / Ml , Naproxen Tablet Ip 250Mg , Naproxen Tablet Ip 500Mg , Neomycin Bacitracin And Sulphacetamide Power ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Neostigmine Inj Ip 0.5 Mg / Ml , Neostigmine Injection Ip 2.5Mg / 5Ml , Neostigmine Tab Ip 15 Mg , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) , Nitrofurantoin Tab Ip 100Mg , Nitroglycerin Inj 5 Mg / Ml , Noradrenaline Injection Ip 2 Mg / Ml , Norethisterone Tab Ip 5 Mg , Norfloxacin Tab Ip 400Mg Film Coated , Normal Human Intravenous Immunoglobulin 5G / 100Ml , Octreotide Injection 50 Mcg / Ml , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml F-F-S Bottle , Ofloxacin Oral Suspension Ip 50Mg / 5Ml , Ofloxacin Tab Ip 200 Mg , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O , Olanzapine Tab Ip 5 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg / Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Ors Powder Ip 21.8 Gram , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oxaliplatin Injection Usp 50 Mg , Oxytocin Inj Ip 5 Iu / Ml , Paclitaxel Inj Ip 100 Mg , Paclitaxel Inj Ip 260 Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) , Paracetamol Inj. 150 Mg / Ml , Paracetamol Syrup Ip 125 Mg / 5Ml ( Detail In Rc ) , Paracetamol Tab Ip 500 Mg , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) , Pentoprazole Inj 40 Mg , Peritonial Dialysis Solution Ip , Permethrin Cream 5% , Permethrin Lotion 5% , Pheniramine Inj Ip 22.75Mg / Ml , Phenobarbitone Inj Ip 200Mg / Ml , Phenobarbitone Tab Ip 30 Mg , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% , Phenytoin Injection 50Mg / Ml , Phenytoin Oral Suspension Ip 25Mg / Ml , Phenytoin Tab Ip 100 Mg ( Film Coated ) , Pilocarpine Eye Drops Ip 2 O / O , Pioglitazone Tab Ip 15 Mg , Piperacillin + Tazobactum For Injection Usp 4Gm+500Mg , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Potassium Chloride Inj. 0.15 Gm / Ml , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml , Povidone Iodine Ointment 5% 15 Gm , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) 500 Ml , Povidone Iodine Solution Ip 10 % 500 Ml , Povidone Iodine Solution Ip 5 % 500 Ml , Povidone Iodine Solution Ip 5% 100Ml Bottle , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg , Prazosin Tablets ( Extended Release ) 2.5 Mg , Prednisolone Tab 20 Mg , Prednisolone Tab Ip 5 Mg , Prednisolone Tablet Ip 10 Mg , Pregabalin Cap Ip 75 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Progesterone Inj 200 Mg / 2Ml , Promethazine Inj Ip 25Mg / Ml , Promethazine Syrup Ip 5 Mg / 5Ml 30 Ml , Promethazine Tab Ip 25 Mg , Propofol Inj Ip / Bp / Usp 10 Mg / Ml , Propranolol Tab Ip 40 Mg , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Quetiapine Tablet Ip 25Mg , Quetiapine Tablet Ip 50Mg , Quinine Dihydrochloride Inj Ip 300 Mg / Ml , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose , Ramipril Tablets Ip 2.5 Mg , Ranitidine Hcl Injection Ip 50Mg / 2Ml , Ranitidine Tab Ip 150Mg Film Coated , Ranitidine Tab Ip 300Mg Film Coated , Rh-Erythropoetin Inj 10000 Iu , Rh-Erythropoetin Inj 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Risperidone Tab 1 Mg , Risperidone Tab 2Mg , Salbutamol Inhalation 100 Mcg / Dose , Salbutamol Nebuliser Solution Bp 5 Mg / Ml , Salbutamol Syrup Ip 2Mg / 5Ml 30Ml , Salbutamol Tab Ip 2 Mg , Salbutamol Tablet Ip 4 Mg , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) , Sertraline Tab 50 Mg , Sevoflurane , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) , Sodium Bicarbonate Inj Ip 7.5% W / V , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O F-F-S Bottle , Sodium Chloride Inj Ip 500 Ml F-F-S Bottle , Sodium Chloride Injection Ip 100 Ml F-F-S Bottle , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Sodium Valproate Inj 100 Mg / Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg , Spironolactone Tab Ip 25Mg , Spironolactone Tablets Ip 50 Mg , Streptokinase Injection 15 Lac Units , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) , Sulfasalazine Delayed Release Tablets Usp / Gastroresistant Sulfasalazine Tablets Bp 500 Mg , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) , Surgical Spirit Ip / Bp ( 100 Ml ) , Surgical Spirit Ip / Bp ( 500 Ml ) , Tamoxifen Tab Ip 10 Mg , Tamsulosin Hcl Tablets / Capsule 0.4 Mg , Telmisartan Tablets Ip 40 Mg , Tenaligliptin Tablet 20Mg , Terazosin Tab Usp 1 Mg , Terazosin Tablets Usp 2 Mg , Terbutaline Tablets Ip 2.5 Mg , Tetanus Immunoglobulin 250 Iu / Vial , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline Ip 77 Mg ) , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) , Thiamine Tablets Ip 100 Mg , Thiopentone Inj Ip 0.5 G , Thyroxine Sodium Tablets Ip 100Mcg , Thyroxine Tablets Ip 50 Mcg , Timolol Eye Drops Ip 0.5 O / O W / V , Tinidazole Tab Ip 300 Mg ( Film Coated ) , Tinidazole Tab Ip 500 Mg ( Film Coated ) , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O , Tobramycin Eye Drops 0.3% [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) , Torsemide Inj 10 Mg / Ml , Torsemide Tab 10 Mg , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg / Ml , Tranexamic Acid Tablets Ip / Bp 500 Mg , Travoprost Eye Drops Ip 0.004 O / O , Tretenoin Cream Usp 0.025% , Trifluperazine Tab Ip 5 Mg Coated , Trihexyphenidyl Hcl Tab Ip 2 Mg , Tropicamide Eye Drop Ip 1O / O , Urokinase Injection 5 Lac Unit ( Lyophilized ) , Ursodeoxycholic Acid Tablets 300 Mg , Valethamate Bromide Inj 8Mg / Ml , Vancomycin For Intravenous Infusion Ip 1 Gm , Vancomycin For Intravenous Infusion Ip 500 Mg , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) , Verapamil Tab Ip 40 Mg Film Coated , Vinblastine Inj Ip 10Mg / 10Ml , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) , Vitamin D3 Oral Solution 60000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) , Vitamin K-1 ( Phytomenadione ) 1Mg / 0.5Ml Injection ( Detail In Rc ) , Warfarin Sodium. Tab Ip 5Mg , Water For Inj Ip , Xylometazoline Nasal Drops Ip 0.1% , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Absorbable Gelatin Sponge 80 X 50X 10Mm ( Details In Rc ) , Absorbent Cotton Wool Ip 500 Gm , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set Blood Transfusion Set ( Details In Rc ) , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) ( Details In Rc ) , Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-6 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-8 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-10 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-12 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-14 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-16 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-18 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-20 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-22 ( Details In Rc ) , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Infant Feeding Tube Size 10Fg ( Details In Rc ) , Infant Feeding Tube Size 8Fg ( Details In Rc ) , Infant Feeding Tube Size 5Fg ( Details In Rc ) , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable ( Details In Rc ) , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable ( Details In Rc ) , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable ( Details In Rc ) , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G ( Details In Rc ) , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc ) , Mucus Extractor Sterile ( Details In Rc ) , Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc ) , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics ( Details In Rc ) , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll , Plaster Of Paris Bandage 10Cm X 2.7Mts , Ryles Tube / Nasogastric Tube Size: 10 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 12 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size:14 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 16 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 18 ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 18G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 20G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 22G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 24 G ( Details In Rc ) , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) , Surgical Blade Sterile, Size 11 ( Details In Rc ) , Surgical Blade Sterile, Size 15 ( Details In Rc ) , Surgical Blade Sterile, Size 22 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 ( Details In Rc ) , Suture Needles Curved And Cutting Size 1-5 ( Details In Rc ) , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch ( Details In Rc ) , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch ( Details In Rc ) , Urine Collecting Bag, Disposable 2000 Ml ( Details In Rc ) , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Plain - Size 2.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 3 ( Details In Rc ) , Endotracheal Tube, Plain - Size 3.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 4 ( Details In Rc ) , Endotracheal Tube, Plain - Size 4.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 5.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 6 ( Details In Rc ) , Endotracheal Tube, Plain -Size 6.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 7 ( Details In Rc ) , Endotracheal Tube, Plain - Size 7.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 8 ( Details In Rc ) , Endotracheal Tube, Plain - Size 8.5 ( Details In Rc ) , Endotracheal Tube, Cuffed - Size 4 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 4.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 5 Details In Rc , Endotracheal Tube, Cuff - Size 6 ( Details In Rc ) , Endotracheal Tube, Cuff- Size 6.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 7 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 7.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 8 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 8.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 9 ( Details In Rc ) , Tracheostomy Tube, Plain - All Sizes ( Details In Rc ) , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes ( Details In Rc ) , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 ( Details In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 ( Details In Rc ) , Corrugated Drainage Sheet - All Sizes ( Details In Rc ) , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm ( Details In Rc ) , Bone Wax Sterilised , Temporary Cardiac Pacing Wire ( Electrode ) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Skin Graft Knife Blade ( Sterile ) & Handle ( Details In Rc ) , K Wire, Length 375 Mm; 1Mm ( Details In Rc ) , K Wire, Length 375 Mm; 1.6Mm ( Details In Rc ) , K Wire, Length 375 Mm; 1.8Mm ( Details In Rc ) , Face Mask, Disposable ( Details In Rc ) , Surgical Cap Disposable ( For Surgeons ) ( Details In Rc ) , Surgical Cap, Disposable ( For Nurses ) ( Details In Rc ) ( Details In Rc ) , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 11 To 17.5 , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 18 To 24 , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 24.5 To 28.5 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 11 To 17.5 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 18 To 24 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 24.5 To 28.5 , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free , Rubber Examination Gloves, Non-Sterile, Extra Small ( Details In Rc ) , Rubber Examination Gloves, Size Small ( Details In Rc ) , Rubber Examination Gloves, Size Medium ( Details In Rc ) , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large ( Details In Rc ) , Pressure Monitoring Line / High Pressure Extension Line ( Details In Rc ) , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml ( Details In Rc ) , Umbilical Catheter For New Born, All Sizes - ( Details In Rc ) , Umbilical Cord Clamp ( Details In Rc ) , Absorbable Oxidized Regenerated Cellulose 2 X 3 Topical Absorbable Haemostatic Bactericidal Property ( Details In Rc ) , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 ( Details In Rc ) , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 ( Details In Rc ) , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- ( Details In Rc ) , Bone Cement , Sanitary Napkin Beltless ( Details In Rc ) , Sanitary Pads Belt Type ( Details In Rc ) , Sanitary Napkin Beltless With Wings ( Details In Rc ) , Oxygen Mask ( Adult ) , Oxygen Mask ( Pediatric ) , Foleys Catheter No. 14 , K-90 Catheter , Vein-O- Line 3 Way With Stock Cork ( For Infusion Pump ) , Cpap Kit , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 , Absorbable Surgical Suture ( Sterile Catgut ) , Needled Suture Chromic Size-3 / 0 ( 3 / 8 Cir Rcutting Needle 26Mm, Length 76 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 ( Details In Rc ) , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 ( Details In Rc ) , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 ( Details In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 4 / 0 ( 3 / 8 Conventional Cutting Needle 19Mm Length 60 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 5 / 0 ( 3 / 8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb 13 Mm Needle, Length 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8Cir Rb Taper Point Double Needle 9.3Mmlength 60 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 7 / 0 ( 3 / 8Cir Rb Double 8Mm Needle, Length 60 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb Double Needle 17Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Tapercut Double Needle 17Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Tapercut Needle 17Mm Length 75 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Tapercut Needle, 25 Mm Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Rb Needle 16 Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 8 / 0 ( 3 / 8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Circle Tapercut 13Mm Double Needle 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Circle Cc 13Mm Needle, Suture Length Of 70Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Suture Length Of 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 4 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 75 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2 / 0 1 / 2 Circle Taper Cut, 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2-0 1 / 2 Circle Taper Cut, 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided ( Green / Blue ) With Size 3 / 0 1 / 2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 10 / 0 ( 3 / 8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 ( Details In Rc ) , B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 ( Details In Rc ) , Absorbable Surgical Sutures, Sterilised Needled Polyglecaprone / Polyglyconate, Monofilament Sutures Size 2 / 0 ( 1 / 2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate, Size 3 / 0 ( 1 / 2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 4 / 0 ( 1 / 2 Circle Cutting 16Mm Needle, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 ( 1 / 2 Circle Reverse Cutting 50 Mm Length 90Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2 / 0 ( 1 / 2 Circle Rb 31Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm , Oxygen Regulator With Humidifier , Surgical Blade No 23 , Vtm , Ppe Kit , Liquid Ecoshield , Utility Rubber Gloves , Liquid Hand Wash 500 Ml , Bleeching Powder 25 Kg , Liquid Hypocloride , Formaldehyde Tablets , Makentosh Rubber Sheet 20 Mtr , Artery Forcep Criles 6 , Artery Forcep Criles 8 , Mosquito Forcep 6 , Scissor 6 , Scissor 8 , Mayo Scissor 6 , Mayo Scissor 8 , Tooth Forcep Criles 6 , Tooth Forcep Criles 8 , Needle Holder 6 , Needle Holder 8 , S.S Drum 12X15 , S.S Drum 10X12 , Electric Sterilizer , S.S Tray 12X15 , Pluse Oxymter & Monitor , Bp Instrument Desk Model , Bp Instrument Stand Model , Fumigation Machine , Kangaroo Gown , Labour Room Apron , Handwash Soap Bar , Safty Dilivary Kit , New Born Baby Kit , Rubber Silar All Size , N95 Mask , Sigma Lock , Mop With Handle , Portable Pulse Oxymeter , Bp Instrument Mercury , Bp Instrument With Stand , Bp Instrument Bulb , Bp Instrument Cuff , Bp Instrument Cloth , Hand Scrub 500Ml , Lead Aprom , Hand Sanitizer 500Ml , Electric Element For Sterlizer 100W / 200W , Autoclave Elemant 600 Kw , Digital Thermometer , Stethoscope , Glass Bottal 30 Ml With Aluminiumcap , Plastic Bottal 150 Ml , Brest Pump Set , Deep Freezer Graph , Record Pen For Graph , Plastic Box ( With Lid ) , Glass Beker 2000Ml Above , Glass Beker 500Ml , Vim Liquid ( Dishwash ) , Colin 500Ml , Harpic 500Ml , Savalon 500Ml , Soap ( Cloth Wash ) 125G , Scrubber , Manual Breast Pump , Steel Contaner , Bottle Brush , Air Router , Air Router Burs Set , Dental Reamer 8K File , B P Handle , Zink Oxide Ugienal Cement , Dental Probe , Mouth Mirror With Probe , Dental Explorer , Tweezer , Gic Cement , Crown Remover , Apec Alocator , Gutta Purcha Point , Arch Bar Wire , Calcium Hydroxide Paste , Carbolic Acid , Zinc Phosphate Paste , Eugenal Oil , Glass Bead Sterlizer , U V Chmber , Patient Apron , Air Roater Oil , Rout Crayers Both Side , Dental Suture Material 3-0 , Needle Holder , Aretery Forcep , Chetal Forcep , Kidney Tray Small , Cotton 200 Gm [ Lp.13 ] - [ U ] , Cotton 400 Gm [ Lp.12 ] - [ U ] , Cotton Roll ( 500 Gm ) [ Lp.39 ] - [ M ] , Cotton Roll 300 Gm Lp21 [ Lp.0 ] - [ U ] , Inj. Gemcitabin 200 Mg , Inj.5 Flurouracil 250 Mg , Inj. Filgrastim 300 Mg , Inj. Carboplatin 450 Mg , Inj. Cyclophosphamide 200 Mg , Inj. Pacilitaxel 260 Mg , Inj. Cisplatin 50 Mg , Inj. Oxaliplatin 50 Mg , Inj. Gemcitabin 1 Gm , Inj. Carboplatin 150 Mg , Inj. Leucovorin 10 Mg , Inj. Cisplatin 10 Mg , Inj. Cyclophosphamide 500 Mg , Inj. Ifosfamide 1 Gm With Mesna , Inj. Pacilitaxel 100 Mg , Inj. Doxombicin 50 Mg , Inj. Trastaumab 440 Mg , Inj. Irinotecan 100 Mg , Inj. Pemetrexed 500 Mg , Inj. Pemetrexed 100 Mg , Inj. Decetaxel 120 Mg , Tab. Tamoxifen 10 Mg , Tab. Methotrexate 2.5 Mg , Tab. Methotrexate 10 Mg , Tab. Capecitabin 500 Mg , Tab. Clophosphamide 50 Mg , Cap. Hysroxyurea 500 Mg , Inj. Mephentermin 10 Ml , Inj. Hepatities B Imunoglobin , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size , Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip 1% W / V 100Ml Size , Ketorolac Tablet 10 Mg , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg ) , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Cefadroxil Tablet 250 Mg , Cefadroxil Tablet 500 Mg , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size , Levofloxacin Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) , Clindamycin Phosphate Injection Ip 300 Mg , Terbinafine Hydrochloride Tablet 250 Mg , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) , Letrozole Tablet Usp 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Usp 2.5 Mg ) , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg ) , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) , Bicalutamide Tablet Usp 50 Mg ( Each Film Tablet Contains Bicalutamide Usp 50 Mg ) , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) , Zoledronic Acid Injection Ip 4Mg / 100Ml 100Ml Size , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size , Ethamsylate Tablet Bp 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate Bp 500 Mg ) , Feracrylum 1% W / W Sterile Solution 100 Ml , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size , Sotalol Hydrochloride Tablet Usp / Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40Mg ) , Carvedilol Tablet 3.125 Mg , Powder Clotrimazole 1% W / W 30 Gm , Terbinafine Ointment 1%W / W ( 10 Gm Tube ) , Mupirocin Cream Usp 2% ( Each Gram Contains 21.5 Mg Mupirocin Calcium Usp In A Mineral Oil Cream Base ) 15 Gm Size , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) , Hepatitis B Immunologlobin Injection Ip 100 I. , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg , Human Chorionic Gonadotropin Injection Ip 5000 I.U. , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Zolpidem Tablet 5 Mg , Acebrophylline Tablet 100 Mg , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W / V Polypack 500 Ml , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) , Phenazopyridine Tablet 5 Mg , Dutasteride Tablet 0.5 Mg , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size , Multi Vitamin Syrup , Pyridostigmine Tablet Usp 60 Mg ( Each Tablet Contains Pyridostigmine Usp 60 Mg ) , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size , Vitamin E Capsule 400 Mg , Inj. Mephentermin 10 Ml , Alpha Beta Arteether Injection [ Lp.26 ] - [ M ] , Swine Flu Vaccine , Triple Layer Mask For Swine Flu, Covid 19 , Inj Hepatitis B Imunoglobin
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Rajasthan View Result →
15.
Health and Family Welfare #8913010 Technical Bid
Genric Dugs, Surgicals Item And Suchers Genric Dugs, Surgicals Item And Suchers , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg , Bupivacaine Inj Ip 0.5% , Halothane Bp , Isoflurane Usp , Ketamine Inj Ip 50 Mg / Ml , Lignocaine Ointment 5 O / O , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg , Lignocaine Gel Ip 2% , Lignocaine Inj Ip 2 O / O , Propofol Inj Ip 10 Mg / Ml , Thiopentone Inj Ip 0.5 G , Sevoflurane , Atropine Sulphate Injection 0.6Mg / Ml , Liquid Medical Oxygen ( Lmo ) , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) , Fentanyl Citrate Injection Ip 2 Ml , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Tab Ip 200 Mg ( Coated ) , Ibuprofen Tab Ip 400 Mg ( Coated ) , Morphine Sulphate Inj Ip 10Mg / Ml , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) , Paracetamol Syrup Ip 125 Mg / 5Ml ( Detail In Rc ) , Paracetamol Tab Ip 500 Mg , Paracetamol Inj. 150 Mg / Ml , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg / Ml , Indomethacin Cap Ip 25 Mg , Diclofence Prolonged Release Tablet Ip 100 Mg , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% , Etoricoxib Tab Ip 120Mg , Mefenamic Acid Tablets Bp 500 Mg , Fentanyl Citrate Injection 50Mcg / Ml , Naproxen Tablet Ip 500Mg , Naproxen Tablet Ip 250Mg , Etoricoxib Tablet Ip 90 Mg , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size , Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip 1% W / V 100Ml Size , Ketorolac Tromethamine Dispersible Tablet 10 Mg ( Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg ) , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use , Betamethasone Tab Ip 0.5Mg , Chlorpheniramine Maleate Tab Ip 4Mg , Dexamethasone Inj Ip 8Mg / 2Ml , Dexamethasone Tab Ip 0.5 Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) , Hydroxyzine Tab Ip 25 Mg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Pheniramine Inj Ip 22.75Mg / Ml , Prednisolone Tab Ip 5 Mg , Promethazine Syrup Ip 5 Mg / 5Ml , Promethazine Inj Ip 25Mg / Ml , Promethazine Tab Ip 25 Mg , Betamethasone Sod Phos Inj Ip 4Mg / Ml , Prednisolone Tablet Ip 10 Mg , Prednisolone Tab Ip 20 Mg , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetirizine Syrup Ip 5Mg / 5 Ml , Levoceitrizine Tablet 5Mg , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) , Naloxone Inj Ip 0.4Mg / Ml , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml , Carbamazepine Tab Ip 200 Mg , Carbamazepine Tab Ip 100 Mg , Phenobarbitone Tab Ip 30 Mg , Phenytoin Injection Bp 50Mg / Ml , Phenytoin Oral Suspension Ip 25Mg / Ml , Phenytoin Tab Ip 100 Mg ( Film Coated ) , Sodium Valproate Inj 100 Mg / Ml , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Phenobarbitone Inj Ip 200Mg / Ml , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg , Clobazam Tablet / Capsule 5 Mg , Clobazam Tablet / Capsule 10 Mg , Levetiracetam Tablet Ip 500 Mg , Levetiracetam Oral Solution / Suspension 100Mg / Ml , Levetiracetam Injection 500Mg / 5Ml , Gabapentine Tablet / Capsule 100Mg , Gabapentine Tablet / Capsule 300Mg , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg ) , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) , Lacosamide Tablet 100 Mg ( Each Film Coated Tablet Contains Lacosamide 100 Mg ) , Topiramate Tablet Ip 25 Mg ( Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , Acyclovir Oral Suspension Ip 400Mg / 5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Albendazole Oral Suspension Ip 400 Mg / 10Ml , Albendazole Tablets Ip 400 Mg ( Detail In Rc ) , Amikacin Inj Ip 100 Mg , Amikacin Inj Ip 500 Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mg , Amphotericin B Inj Ip 50 Mg , Ampicillin Injection Ip 500 Mg , Azithromycin Tab 100 Mg Dispersible Tabs ( 3 Tab Strip 10X3x3 ) , Azithromycin Tablets Ip 250Mg , Azithromycin Tab Ip 500 Mg , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) , Cefotaxime Injection Ip 1 G , Cefotaxime Inj Ip 250 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G / Vial , Ceftriaxone Inj Ip 250 Mg / Vial , Ceftriaxone Inj Ip 500Mg / Vial , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Chloroquine Phosphate Inj Ip 40 Mg / Ml , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml , Ciprofloxacin Injection Ip 200Mg / 100Ml , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Clotrimazole Cream Ip 2% W / W , Clotrimazole Vaginal Tab Ip 500Mg , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Diethylcarbamazine Tab Ip 100 Mg , Doxycycline Cap Ip 100 Mg , Fluconazole Tablets Ip 150Mg , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) , Griseofulvin Tab Ip 125 Mg , Itraconazole Cap 100 Mg , Meropenem Inj Ip 500 Mg , Metronidazole Inj Ip 500 Mg / 100Ml , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml , Metronidazole Tablets Ip 200 Mg ( Film Coated ) , Metronidazole Tablets Ip 400 Mg ( Film Coated ) , Norfloxacin Tab Ip 400Mg Film Coated , Ofloxacin Tab Ip 200 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Quinine Dihydrochloride Inj Ip 300 Mg / Ml , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) , Ampicillin Cap Ip 500Mg , Nitrofurantoin Tab Ip 100Mg , Cloxacillin Sodium Inj Ip 500Mg , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml , Ofloxacin Oral Suspension Ip 50Mg / 5Ml , Tinidazole Tab Ip 300 Mg ( Film Coated ) , Tinidazole Tab Ip 500 Mg ( Film Coated ) , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml , Cefpodoxime Dispersible Tab 50 Mg , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) , Meropenem Inj. Ip 1Gm , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Amikacin Inj Ip 250 Mg , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) , Aztreonam Injection Usp 500 Mg , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) , Cefuroxime Axetil Tab Ip 250 Mg , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Levofloxacin Tablets Ip 250 Mg , Linezolid Tablets Ip 600 Mg , Linezolid Inj 200Mg / 100Ml , Mefloquine Tablets Ip 250 Mg , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) , Vancomycin For Intravenous Infusion Ip 500 Mg , Vancomycin For Intravenous Infusion Ip 1 Gm , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) , Co-Trimoxazole Tablet Ip ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) , Aztreonam Injection 1Gm , Framycetin Sulphate Cream 1 O / O 30Gm Pack , Framycetin Sulphate Cream 1 O / O 100 Gm Pack , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Piperacillin Injection 2 Gm + Tazobactom 250Mg Ip , Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection , Cefadroxil Dispersible Tablet 250 Mg ( Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg ) , Cefadroxil Tablet 500 Mg , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size , Levofloxacin Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) , Faropenem Tablet Sodium 200 Mg ( Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg ) , Clindamycin Phosphate Injection Ip 300 Mg , Imipenem + Cilastatin Injection 500Mg / 500Mg Ip Powder For Solution , Polymixin Sulphate B Injection Usp 5 Lac I.U. , Meropenem Injection Ip 250 Mg , Colistimethate Injection Ip 1M Iu Powder For Solution , Voriconazole Injection 200Mg / Vial , Terbinafine Hydrochloride Tablet 250 Mg , Valganciclovir Tablet 450 Mg , Entecavir Tablet Ip 0.5 Mg ( Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg ) , Ganciclovir Sodium Injection 500Mg ( Lyophilized Powder For Reconstitution ) , Azathioprine Tab Ip 50 Mg , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) , Chlorambucil Tab Ip 5 Mg , Cisplatin Inj Ip 50 Mg / 50 Ml , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cytarabine Injection Bp 500Mg , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Doxorubicin Inj Ip 50 Mg / 25 Ml , Etoposide Inj Ip 100 Mg , Fluorouracil Inj Ip 250 Mg / 5Ml , L-Asparaginase Inj 10000 Iu , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Methotrexate Inj Ip 50 Mg / 2 Ml , Methotrexate Tab Ip 2.5 Mg , Paclitaxel Inj Ip 260 Mg , Paclitaxel Inj Ip 100 Mg , Tamoxifen Tab Ip 10 Mg , Vinblastine Inj Ip 10Mg / 10Ml , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Carboplatin Injection Ip 150 Mg , Carboplatin Injection Ip 450 Mg , Cisplatin Inj Ip 10 Mg / 10 Ml , Dacarbazine Injection 500 Mg Usp / Bp , Filgrastim Injection Ip ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcg , Gemcitabine For Injection 200 Mg , Gemcitabine For Injection Ip 1Gm , Ifosfamide Injection Ip / Bp / Usp 1Gm , Imatinib Tab Ip 400Mg , Methotrexate Tablets Ip 10 Mg , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg , Oxaliplatin Injection Usp 50 Mg , Cyclosporin Capsule Usp / Ip 50 Mg , Procarbazine Hydrochloride Capsule Usp 50 Mg ( Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg ) , Bendamustine Injection 100 Mg , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) , Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg ) , Bortezomib Injection 2Mg , Abiraterone Acetate Tablet Ip 250 Mg ( Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg ) , Lomustine Capsule Ip 40 Mg ( Each Capsule Contains Lomustine Ip 40 Mg ) , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) , Bevacizumab Injection 400 Mg , Bevacizumab Injection 100 Mg , Cyclophosphamide Tablet Ip 50 Mg ( Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg ) , Gefitinib Tablet Ip 250 Mg ( Each Film Coated Tablet Contains Gefitinib Ip 250 Mg ) , Mycophenolate Mofetil Capsule / Tablets Ip 250 Mg ( Each Capsule / Tablets Conatin Mycophenolate Mofetil Ip 250 Mg ) , Tacrolimus Capsule Ip 0.5 Mg ( Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg ) , Mycophenolate Sodium Tablet 360 Mg ( Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg ) , Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) , Zoledronic Acid Injection Ip 4Mg Vial , Dasatinib Tab 100 Mg , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Trihexyphenidyl Hcl Tab Ip 2 Mg , Bromocriptine Tablets Ip 2.5 Mg , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) , Enoxaparin Sodium Inj Ip 60 Mg , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) , Human Albumin Solution Ip 20% , Rh-Erythropoetin Inj Ip 10000 Iu , Rh-Erythropoetin Inj Ip 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Factor Ix Concentrate ( Purified ) Ip 500-600 I.U. ( Human Coagulation Factor Ix ) , Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial ) , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion , Tranexamic Acid Tablets Ip 500 Mg , Warfarin Sodium. Tab Ip 5Mg , Vitamin K-1 ( Phytomenadione ) Ip 1Mg / 0.5Ml Injection ( Detail In Rc ) , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial , Recombinant Coagulation Factor Viia 1Mg , Recombinant Coagulation Factor Viia 2Mg , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size , Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) , Feracrylum 1% W / V Sterile Solution 100 Ml , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size , Recombinant F Ix 500 Iu With Diluent , 3Rd Generation Recombinant F Viii 250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amiodarone Hydrochloride Inj 50 Mg / Ml , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Clopidogrel Tab Ip 75 Mg , Digoxin Inj Ip 0.25 Mg / Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dobutamine Inj Ip 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Ip 250 Mg / 5Ml ( Amp ) , Dopamine Hydrochloride Inj Ip 40 Mg / Ml , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tab Ip 2.5Mg , Isosorbide Dinitrate Tab Ip 5 Mg , Isosorbide Mononitrate Tabs Ip 20 Mg , Lisinopril Tab Ip 5 Mg , Losartan Tab Ip 50 Mg , Magnesium Sulphate Inj. Ip 500Mg / Ml ( 50%W / V ) , Methyldopa Tab Ip 250Mg Film Coated , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) , Nitroglycerin Inj 5 Mg / Ml , Propranolol Tab Ip 40 Mg , Streptokinase Injection 15 Lac Units Ip , Verapamil Tab Ip 40 Mg Film Coated , Labetalol Tab Ip 100Mg , Labetalol Hcl Inj Ip 20Mg / 4Ml , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) , Atenolol Tab Ip 25 Mg , Enalapril Maleate Tablets Ip 10 Mg , Lisinopril Tablets Ip 10 Mg , Lisinopril Tab Ip 2.5 Mg , Losartan Tab Ip 25 Mg , Adenosine Injection Ip 6 Mg / 2Ml , Atorvastatin Tablets Ip 40 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Fenofibrate Capsules / Tab Ip 200 Mg , Isoprenaline Injection Ip 2Mg / Ml , Metoprolol Tablets Ip 25 Mg , Metoprolol Succinate Extended Release Tablets Ip 50 Mg , Noradrenaline Injection Ip 2 Mg / Ml , Prazosin Tablets ( Extended Release ) 2.5 Mg , Telmisartan Tablets Ip 40 Mg , Urokinase Injection 5 Lac Unit ( Lyophilized ) , Ramipril Tablets Ip 2.5 Mg , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Clonidine Hydrochloride Tablet Ip 0.1 Mg ( Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg ) , Sotalol Hydrochloride Tablet Usp / Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40Mg ) , Esmolol Hydrochloride Injection 10Mg / Ml 10Ml Size , Sodium Nitroprusside Injection 25Mg / Ml 2Ml Size , Carvedilol Tablet 3.125 Mg , Rosuvastatin Tablet Ip 20 Mg ( Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg ) , Rosuvastatin Tablet 10 Mg , Sacubitril 24 Mg And Valsartan 26 Mg Tablet , Chlorhexidine Mouthwash Ip 0.2 O / O , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O , Acyclovir Cream 5% , Cetrimide Cream Ip 15 Gm , Fusidic Acid Cream Ip 2% , Glycerin Ip 400 Gm , Liquid Paraffin Ip 400 Ml , Miconazole Nitrate Cream Ip 2% , Povidone Iodine Ointment 5% 15 Gm , Neomycin Bacitracin And Sulphacetamide Powder ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Gentian Violet Topical Solution Usp 1O / O , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) , Betamethasone Dipropionate Cream Ip 0.05% , Betamethasone Lotion Ip 0.05 O / O , Clindamycin Phosphate Gel Usp 1 O / O , Clobetasol Propionate Cream Ip 0.05 O / O , Glycerin Ip 100 Ml , Ketoconazole Cream 2% , Permethrin Lotion 5% , Permethrin Cream 5% , Tretenoin Cream Usp 0.025% , Coal Tar 6% & Salicylic Acid 3% Ointment , Calamine Lotion Ip 100Ml , Powder Clotrimazole 1% W / W 30 Gm , Terbinafine Cream 1%W / W ( 10 Gm Tube ) , Olopatadine Hydrochloride Ophthalmic Solution 0.1% W / V Ip ( E / D ) 5Ml Size , Oitment Mupirocin Ip 2% , Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) , Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) , Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) , Gadodiamide Inj. 0.5Mml / Ml Vial , Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. , Multistix Test Strip , Povidone Iodine Solution Ip 5 % 500 Ml , Compound Benzoin Tincture Ip , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) , Gluteraldehyde Solution 2% , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) , Surgical Spirit Ip ( 500 Ml ) , Chlorhexidine Gluconate Solution 5% 250 Ml , Surgical Spirit Ip ( 100 Ml ) , Povidone Iodine Solution Ip 5% 100Ml Bottle , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Solution Ip 10 % , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , Acetazolamide Tab Ip 250Mg , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) , Hydrochlorthiazide Tab Ip 12.5 Mg , Mannitol Inj Ip 20% W / V , Spironolactone Tab Ip 25Mg , Torsemide Tab 10 Ip Mg , Hydrochlorthiazide Tab Ip 25Mg , Torsemide Inj 10 Mg / Ml , Spironolactone Tablets Ip 50 Mg , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Bisacodyl Tab Ip 5 Mg , Dicyclomine Tab Ip 10 Mg , Dicyclomine Inj Ip 10 Mg / Ml , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml , Domperidone Suspension Ip 5Mg / 5Ml , Domperidone Tab Ip 10 Mg , Hyoscine Butylbromide Inj Ip 20 Mg / Ml , Loperamide Tab Ip 2 Mg , Metoclopramide Inj Ip 10Mg / 2Ml , Metoclopramide Tab Ip 10 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg / Ml , Ors Powder Ip , Pentoprazole Inj 40 Mg , Ranitidine Hcl Injection Ip 50Mg / 2Ml , Ranitidine Tab Ip 150Mg Film Coated , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O , Hyoscine Butyl Bromide Tablets Ip 10Mg , Drotaverine Tab Ip 40 Mg , Ranitidine Tab Ip 300Mg Film Coated , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml , Liquid Paraffin Ip 100 Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Ursodeoxycholic Acid Tablets Ip 300 Mg , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) , Allopurinol Tablets Ip 100 Mg , Hydroxychloroquine Sulphate Tablets 200Mg , Leflunomide Tablets Ip 10Mg ( Film Coated ) , Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) , Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) , Carbimazole Tabs Ip 5 Mg ( Film Coated ) , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg / Ml , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Conjugated Estrogen Tabs Usp 0.625 Mg. , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe , Ethinyloestradiol Tabs Ip 50 Mcg , Glibenclamide Tab Ip 5 Mg , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 2 Mg , Glimepiride Tab Ip 1Mg , Glipizide Tab Ip 5Mg , Hydroxyprogesterone Inj Ip 250Mg / Ml , Isophane Insulin Inj Ip 40 Iu / Ml , Metformin Tab Ip 500 Mg ( Film Coated ) , Norethisterone Tab Ip 5 Mg , Pioglitazone Tab Ip 15 Mg , Progesterone Inj 200 Mg / 2Ml , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) , Thyroxine Sodium Tablets Ip 100Mcg , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets Ip ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) , Glucagon For Injection Usp 1 Mg / Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Thyroxine Tablets Ip 50 Mcg , Octreotide Injection 50 Mcg / Ml , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges , Tenaligliptin Tablet Ip 20Mg , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) , Human Anti D Immunoglobulin 150 Mcg , Human Rabies Immunoglobulin Inj 150 Iu / Ml , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) , Tetanus Immunoglobulin Ip 250 Iu / Vial , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) , Diphtheria Antitoxin 10000 Iu , Hepatitis B Immunologlobin Injection Ip 200 I.U , Human Immunoglobulin Inj With 12%Igm, 12%Iga, 76%Igg In Pack Of 10Ml ( 0.5Gm ) , Atracurium Inj 10 Mg / Ml , Glycopyrrolate Inj Ip 0.2 Mg / Ml , Midazolam Inj Ip 1 Mg / Ml , Neostigmine Inj Ip 0.5 Mg / Ml , Neostigmine Tab Ip 15 Mg , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) , Valethamate Bromide Inj 8Mg / Ml , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) , Neostigmine Injection Ip 2.5Mg / 5Ml , Cis Atracurium Besylate Injection 2 Mg / Ml In 5 Ml Vial , Tropicamide Eye Drop Ip 1O / O , Atropine Eye Ointment Ip 1% , Atropine Sulphate Ophthalmic Solution Usp 1% , Chloramphenicol Eye Drops Ip 0.5 0 / 0 , Ciprofloxacin Eye Drops Ip 0.3 O / O W / V , Ciprofloxacin Ophthalmic Ointment Usp 0.3% , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O , Tobramycin Eye Drops 0.3% [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Lidocaine Hcl Topical Solution Usp 4% , Fluconazole Eye Drops 0.3% , Timolol Eye Drops Ip 0.5 O / O W / V , Homatropine Eye Drops Ip 2% , Travoprost Eye Drops Ip 0.004 O / O , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Betaxolol Eye Drops 0.5 O / O , Carboxymethylcellulose Eye Drops Ip 0.5% , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size , Isoxsuprine Inj Ip 5 Mg / Ml , Isoxsuprine Tab Ip 20 Mg , Methylergometrine Inj Ip 0.2 Mg / Ml , Methylergometrine Tab Ip 0.125 Mg , Misoprostol Tab Ip 200 Mcg , Oxytocin Inj Ip 5 Iu / Ml , Mifepristone Tab Ip 200Mg , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) / Natural Micronised Progesteron Tablet 200 Mg ( Each Tablet Contains Progesteron Ip 200 Mg ) , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) , Human Chorionic Gonadotropin Injection Ip 5000 I.U. , Leurprolide Acetate Depot 3.75 Mg , Leurprolide Acetate Depot 11.25 Mg , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amitriptyline Tab Ip 25Mg Film Coated , Chlordiazepoxide Tablets Ip 10Mg , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) , Chlorpromazine Inj. Ip 25Mg / Ml , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) , Diazepam Tab Ip 5 Mg , Escitalopram Tab Ip 10 Mg , Fluoxetine Cap Ip 20 Mg , Haloperidol Inj Ip 5 Mg / Ml , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Imipramine Tab Ip 25 Mg ( Coated Tab ) , Imipramine Tab Ip 75 Mg ( Coated ) , Lithium Carbonate Tab Ip 300 Mg , Lorazepam Inj Ip 2 Mg / Ml , Olanzapine Tab Ip 5 Mg , Risperidone Tab 2Mg , Risperidone Tab 1 Mg , Sertraline Tab Ip 50 Mg , Trifluperazine Tab Ip 5 Mg Coated , Quetiapine Tablet Ip 50Mg , Quetiapine Tablet Ip 25Mg , Clonazepam Tablet 0.5 Mg , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Zolpidem Tablet 5 Mg , Aminophylline Inj Ip 25 Mg / Ml , Beclomethasone Inhalation Ip 200 Mcg / Dose , Budesonide Nebulizer Suspension 0.25Mg / Ml , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S. , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml , Salbutamol Tablet Ip 4 Mg , Salbutamol Inhalation 100 Mcg / Dose , Salbutamol Nebuliser Solution Bp 5 Mg / Ml , Salbutamol Tab Ip 2 Mg , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) , Salbutamol Syrup Ip 2Mg / 5Ml , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Budesonide Powder For Inhalation 200 Mcg , Ipratropium Powder For Inhalation Ip 40 Mcg , Terbutaline Tablets Ip 2.5 Mg , Xylometazoline Nasal Drops Ip 0.1% , Cough Syrup / Expectorant ( 50 ) Ml , Acebrophylline Tablet / Capsule 100 Mg , Compound Sodium Lactate Inj. Ip , Dextrose Inj Ip 25% W / V , Dextrose Inj Ip 10% , Dextrose Inj Ip 5% , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection ) , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Potassium Chloride Inj. 0.15 Gm / Ml , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W / V Polypack 500 Ml , Finasteride Tablets Ip 5 Mg , Tamsulosin Hcl Tablets / Capsule 0.4 Mg , Flavoxate Tablets Ip 200 Mg ( Coated Tablet ) , Savelamer Carbonate Tablet 400 Mg ( Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg ) , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) , Levamisol Hydrochloride Tablet Ip 50 Mg ( Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg ) , Phenazopyridine Tablet 5 Mg , Dutasteride Tablet 0.5 Mg , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) , Betahistine Tab Ip 8 Mg , Betahistine Tab Ip 16 Mg , Cinnarizine Tablets Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , Ascorbic Acid Tab Ip 500 Mg , Calcium Gluconate Inj Ip 10% ( Iv Use ) , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Folic Acid Tab Ip 5 Mg , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) , Cholecalciferol Granules 60, 000 Iu / Gm , Mecobalamin Inj 500 Mcg / Ml , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Thiamine Tablets Ip 100 Mg , Calcitriol Capsules Ip 0.25 Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Cobalmine Tablet 1500Mcg , Vitamin D3 Oral Solution 60000 Iu , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size , Multi Vitamin Syrup , Flunarizine Tab 5 Mg , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Peritonial Dialysis Solution Ip , Sodium Bicarbonate Inj Ip 7.5% W / V , Water For Inj Ip , Alendronate Sodium Tablets Usp / Bp 35 Mg , Mannitol With Glycerin Injection 10 O / O + 10 O / O W / V ( For Intravenous Infusion ) , Normal Human Intravenous Immunoglobulin 5G / 100Ml , Pregabalin Cap Ip 75 Mg , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Intravenous Fat Emulsion 20% W / V 250Ml , Pyridostigmine Tablet Ip 60 Mg ( Each Tablet Contains Pyridostigmine Ip 60 Mg ) , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size , Amino Acid 10% Injection 100Ml Size , Vitamin E Capsule 400 Mg , Inj Poractant Alpha 80 Mg / Ml In Pack Of 1.5 Ml ( Detail In Rc ) , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg , Liposomol Amphotericine Injection B 50Mg , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 , Absorbable Surgical Suture ( Sterile Catgut ) , Needled Suture Chromic Size-3 / 0 ( 3 / 8 Cir Rcutting Needle 26Mm, Length 76 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 ( Details In Rc ) , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 ( Details In Rc ) , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 ( Details In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 4 / 0 ( 3 / 8 Conventional Cutting Needle 19Mm Length 60 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 5 / 0 ( 3 / 8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb 13 Mm Needle, Length 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue ( 3 / 8Cir Rb 16 Mm Needle, Length 90 Cm ) Size 6 / 0 , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 7 / 0 ( 3 / 8Cir Rb Double 8Mm Needle, Length 60 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb Double Needle 17Mm Length 90 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Tapercut Double Needle 17Mm Length 70 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Tapercut Needle 17Mm Length 75 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Tapercut Needle, 25 Mm Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Rb Needle 16 Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 8 / 0 ( 3 / 8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Circle Tapercut 13Mm Double Needle 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Circle Cc 13Mm Needle, Suture Length Of 70Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Suture Length Of 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 4 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 75 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2 / 0 1 / 2 Circle Taper Cut, 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2-0 1 / 2 Circle Taper Cut, 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green / White Or Blue / White Coated Polyster Braided ( Green / Blue ) With Size 3 / 0 1 / 2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 10 / 0 ( 3 / 8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 ( Details In Rc ) , B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 ( Details In Rc ) , Absorbable Surgical Sutures, Sterilised Needled Polyglecaprone / Polyglyconate, Monofilament Sutures Size 2 / 0 ( 1 / 2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate, Size 3 / 0 ( 1 / 2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 4 / 0 ( 1 / 2 Circle Cutting 16Mm Needle, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 ( 1 / 2 Circle Reverse Cutting 50 Mm Length 90Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2 / 0 ( 1 / 2 Circle Rb 31Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm , Absorbable Gelatin Sponge 80 X 50X 10Mm ( Details In Rc ) , No Item , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set Blood Transfusion Set ( Details In Rc ) , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) ( Details In Rc ) , Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-6 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-8 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-10 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-12 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-14 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-16 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-18 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-20 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-22 ( Details In Rc ) , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Infant Feeding Tube Size 10Fg ( Details In Rc ) , Infant Feeding Tube Size 8Fg ( Details In Rc ) , Infant Feeding Tube Size 5Fg ( Details In Rc ) , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable ( Details In Rc ) , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable ( Details In Rc ) , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable ( Details In Rc ) , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G ( Details In Rc ) , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc ) , Mucus Extractor Sterile ( Details In Rc ) , Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc ) , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics ( Details In Rc ) , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll , Plaster Of Paris Bandage 10Cm X 2.7Mts , Ryles Tube / Nasogastric Tube Size: 10 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 12 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size:14 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 16 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 18 ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 18G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 20G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 22G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 24 G ( Details In Rc ) , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) , Surgical Blade Sterile, Size 11 ( Details In Rc ) , Surgical Blade Sterile, Size 15 ( Details In Rc ) , Surgical Blade Sterile, Size 22 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 ( Details In Rc ) , Suture Needles Curved And Cutting Size 1-5 ( Details In Rc ) , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch ( Details In Rc ) , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch ( Details In Rc ) , Urine Collecting Bag, Disposable 2000 Ml ( Details In Rc ) , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Plain - Size 2.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 3 ( Details In Rc ) , Endotracheal Tube, Plain - Size 3.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 4 ( Details In Rc ) , Endotracheal Tube, Plain - Size 4.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 5.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 6 ( Details In Rc ) , Endotracheal Tube, Plain -Size 6.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 7 ( Details In Rc ) , Endotracheal Tube, Plain - Size 7.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 8 ( Details In Rc ) , Endotracheal Tube, Plain - Size 8.5 ( Details In Rc ) , Endotracheal Tube, Cuffed - Size 4 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 4.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 5 Details In Rc , Endotracheal Tube, Cuff - Size 6 ( Details In Rc ) , Endotracheal Tube, Cuff- Size 6.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 7 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 7.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 8 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 8.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 9 ( Details In Rc ) , Tracheostomy Tube, Plain - All Sizes ( Details In Rc ) , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes ( Details In Rc ) , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 ( Details In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 ( Details In Rc ) , Corrugated Drainage Sheet - All Sizes ( Details In Rc ) , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm ( Details In Rc ) , Bone Wax Sterilised , Temporary Cardiac Pacing Wire ( Electrode ) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Skin Graft Knife Blade ( Sterile ) ( Details In Rc ) , K Wire, Length 375 Mm; 1Mm ( Details In Rc ) , K Wire, Length 375 Mm; 1.6Mm ( Details In Rc ) , K Wire, Length 375 Mm; 1.8Mm ( Details In Rc ) , Face Mask, Disposable ( Details In Rc ) , Surgical Cap Disposable ( For Surgeons ) ( Details In Rc ) , Surgical Cap, Disposable ( For Nurses ) ( Details In Rc ) ( Details In Rc ) , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 11 To 17.5 , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 18 To 24 , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 24.5 To 28.5 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 11 To 17.5 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 18 To 24 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 24.5 To 28.5 , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free , Rubber Examination Gloves, Non-Sterile, Extra Small ( Details In Rc ) , Rubber Examination Gloves, Size Small ( Details In Rc ) , Rubber Examination Gloves, Size Medium ( Details In Rc ) , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large ( Details In Rc ) , Pressure Monitoring Line / High Pressure Extension Line ( Details In Rc ) , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml ( Details In Rc ) , Umbilical Catheter For New Born, All Sizes - ( Details In Rc ) , Umbilical Cord Clamp ( Details In Rc ) , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property ( Details In Rc ) , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 ( Details In Rc ) , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 ( Details In Rc ) , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- ( Details In Rc ) , Bone Cement , Sanitary Napkin Beltless ( Details In Rc ) , Sanitary Pads Belt Type ( Details In Rc ) , Sanitary Napkin Beltless With Wings ( Details In Rc ) , Oxygen Mask ( Adult ) , Oxygen Mask ( Pediatric ) , Foleys Catheter No. 14 ( Detail In Rc ) , Nelaton Catheter Size 14 Fg ( Detail In Rc ) , Ecg Electrode ( Detail In Rc ) , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 ( Detail In Rc ) , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml ( Detail In Rc ) , Urethral Catheter 90 ( Fg-14 ) Made Up Of Medical Grade Pvc ( Detail In Rc ) , Urethral Catheter 91 ( Fg-10 ) , Made Up Of Medical Grade Pvc ( Detail In Rc ) , Vaccum Suction Set, 2.5 Meter Length ( Detail In Rc ) , Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 10Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 50Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 100Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 150Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) ( Detail In Rc ) , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) , Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support ( Detail In Rc ) , Nebulization Mask Adult ( Detail In Rc ) , Nebulization Mask Paediatric ( Detail In Rc ) , Chemotherapy Port And Non-Coring Needles ( Adult ) ( Detail In Rc ) , Chemotherapy Port & Non-Coring Needles ( Pediatric ) ( Detail In Rc )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
16.
Health and Family Welfare #8913001 Technical Bid
SUPPLY OF Mukhye Mantri Nisulk Dawa Yojnatergat Jenric Dawai Avam Consumable Ki Dar Sambia Suchi Mukhye Mantri Nisulk Dawa Yojnatergat Jenric Dawai Avam Consumable Ki Dar Sambia Suchi , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg [ 2 ] , Bupivacaine Inj Ip 0.5% [ 4 ] , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml [ 5 ] , Halothane Bp [ 6 ] , Isoflurane Usp [ 7 ] , Ketamine Inj Ip 50 Mg / Ml [ 8 ] , Lignocaine Ointment 5 O / O [ 9 ] , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg [ 10 ] , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg [ 11 ] , Lignocaine Gel Ip 2% [ 12 ] , Lignocaine Inj Ip 2 O / O [ 13 ] , Propofol Inj Ip 10 Mg / Ml [ 14 ] , Thiopentone Inj Ip 0.5 G [ 15 ] , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) [ 19 ] , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) [ 20 ] , Fentanyl Citrate Injection Ip 2 Ml [ 21 ] , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg [ 22 ] , Ibuprofen Tab Ip 200 Mg ( Coated ) [ 23 ] , Ibuprofen Tab Ip 400 Mg ( Coated ) [ 24 ] , Morphine Sulphate Inj Ip 10Mg / Ml [ 25 ] , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) [ 26 ] , Paracetamol Syrup Ip 125 Mg / 5Ml ( Detail In Rc ) [ 27 ] , Paracetamol Tab Ip 500 Mg [ 28 ] , Paracetamol Inj. 150 Mg / Ml [ 29 ] , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) [ 30 ] , Tramadol Cap Ip 50 Mg [ 32 ] , Tramadol Inj 50 Mg / Ml [ 33 ] , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use [ 34 ] , Betamethasone Tab Ip 0.5Mg [ 35 ] , Chlorpheniramine Maleate Tab Ip 4Mg [ 37 ] , Dexamethasone Inj Ip 8Mg / 2Ml [ 39 ] , Dexamethasone Tab Ip 0.5 Mg [ 40 ] , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) [ 42 ] , Hydroxyzine Tab Ip 25 Mg [ 43 ] , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg [ 44 ] , Pheniramine Inj Ip 22.75Mg / Ml [ 45 ] , Prednisolone Tab Ip 5 Mg [ 47 ] , Promethazine Syrup Ip 5 Mg / 5Ml [ 48 ] , Promethazine Inj Ip 25Mg / Ml [ 49 ] , Promethazine Tab Ip 25 Mg [ 50 ] , Naloxone Inj Ip 0.4Mg / Ml [ 51 ] , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg [ 52 ] , Carbamazepine Tab Ip 200 Mg [ 53 ] , Carbamazepine Tab Ip 100 Mg [ 54 ] , Phenobarbitone Tab Ip 30 Mg [ 56 ] , Phenytoin Injection Bp 50Mg / Ml [ 57 ] , Phenytoin Oral Suspension Ip 25Mg / Ml [ 58 ] , Phenytoin Tab Ip 100 Mg ( Film Coated ) [ 59 ] , Sodium Valproate Inj 100 Mg / Ml [ 60 ] , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg [ 61 ] , Acyclovir Oral Suspension Ip 400Mg / 5Ml [ 62 ] , Acyclovir Tab Ip 200 Mg [ 63 ] , Acyclovir Tab Ip 800 Mg [ 64 ] , Albendazole Oral Suspension Ip 400 Mg / 10Ml [ 65 ] , Amikacin Inj Ip 100 Mg [ 67 ] , Amikacin Inj Ip 500 Mg [ 68 ] , Amoxycillin And Cloxacillin Cap 250 + 250 Mg [ 69 ] , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg [ 70 ] , Amoxycillin Cap Ip 250Mg [ 71 ] , Amoxycillin Cap Ip 500Mg [ 72 ] , Amoxycillin Dispersible Tablets Ip 125 Mg [ 73 ] , Ampicillin Injection Ip 500 Mg [ 75 ] , Benzathine Benzylpenicillin Inj Ip 12 Lac Units [ 81 ] , Benzathine Benzylpenicillin Inj Ip 6 Lac Units [ 82 ] , Cefixime Tab Ip 100 Mg [ 84 ] , Cefixime Tab Ip 200 Mg [ 85 ] , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) [ 86 ] , Cefotaxime Injection Ip 1 G [ 87 ] , Cefotaxime Inj Ip 250 Mg [ 88 ] , Ceftazidime Inj Ip 1G [ 89 ] , Ceftazidime Inj Ip 250 Mg [ 90 ] , Ceftazidime Inj Ip 500 Mg [ 91 ] , Ceftriaxone Inj Ip 1G / Vial [ 93 ] , Ceftriaxone Inj Ip 250 Mg / Vial [ 94 ] , Ceftriaxone Inj Ip 500Mg / Vial [ 95 ] , Cephalexin Cap Ip 250 Mg [ 96 ] , Cephalexin Cap Ip 500 Mg [ 97 ] , Chloroquine Phosphate Inj Ip 40 Mg / Ml [ 98 ] , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated [ 99 ] , Ciprofloxacin Injection Ip 200Mg / 100Ml [ 101 ] , Ciprofloxacin Tablets Ip 250 Mg Film Coated [ 102 ] , Ciprofloxacin Tablet Ip 500 Mg Film Coated [ 103 ] , Clotrimazole Cream Ip 2% W / W [ 104 ] , Clotrimazole Vaginal Tab Ip 500Mg [ 105 ] , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O [ 106 ] , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg [ 107 ] , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg [ 108 ] , Diethylcarbamazine Tab Ip 100 Mg [ 110 ] , Doxycycline Cap Ip 100 Mg [ 111 ] , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) [ 116 ] , Griseofulvin Tab Ip 125 Mg [ 117 ] , Itraconazole Cap 100 Mg [ 118 ] , Meropenem Inj Ip 500 Mg [ 119 ] , Metronidazole Inj Ip 500 Mg / 100Ml [ 120 ] , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml [ 121 ] , Metronidazole Tablets Ip 200 Mg ( Film Coated ) [ 122 ] , Metronidazole Tablets Ip 400 Mg ( Film Coated ) [ 123 ] , Norfloxacin Tab Ip 400Mg Film Coated [ 124 ] , Ofloxacin Tab Ip 200 Mg [ 125 ] , Primaquine Tab Ip 2.5 Mg [ 128 ] , Primaquine Tab Ip 7.5 Mg [ 129 ] , Quinine Dihydrochloride Inj Ip 300 Mg / Ml [ 131 ] , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) [ 132 ] , Azathioprine Tab Ip 50 Mg [ 133 ] , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) [ 134 ] , Chlorambucil Tab Ip 5 Mg [ 136 ] , Cisplatin Inj Ip 50 Mg / 50 Ml [ 137 ] , Cyclophosphamide Inj Ip 200 Mg [ 138 ] , Cyclophosphamide Inj Ip 500 Mg [ 139 ] , Cytarabine Injection Bp 500Mg [ 141 ] , Danazol Cap Ip 50 Mg [ 142 ] , Daunorubicin Inj Ip 20 Mg [ 143 ] , Doxorubicin Inj Ip 50 Mg / 25 Ml [ 144 ] , Etoposide Inj Ip 100 Mg [ 146 ] , Flunarizine Tab 5 Mg [ 147 ] , Fluorouracil Inj Ip 250 Mg / 5Ml [ 148 ] , L-Asparaginase Inj 10000 Iu [ 149 ] , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml [ 150 ] , Melphalan Tab Ip 5 Mg [ 151 ] , Mercaptopurine Tab Ip 50 Mg [ 152 ] , Methotrexate Inj Ip 50 Mg / 2 Ml [ 153 ] , Methotrexate Tab Ip 2.5 Mg [ 154 ] , Paclitaxel Inj Ip 260 Mg [ 155 ] , Paclitaxel Inj Ip 100 Mg [ 156 ] , Tamoxifen Tab Ip 10 Mg [ 157 ] , Vinblastine Inj Ip 10Mg / 10Ml [ 158 ] , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) [ 159 ] , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg [ 160 ] , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg [ 161 ] , Trihexyphenidyl Hcl Tab Ip 2 Mg [ 162 ] , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg [ 163 ] , Deferasirox Tab 100 Mg [ 165 ] , Deferasirox Tab 500 Mg [ 166 ] , Deferiprone Cap 250 Mg [ 167 ] , Deferiprone Cap 500 Mg [ 168 ] , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) [ 169 ] , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) [ 171 ] , Enoxaparin Sodium Inj Ip 60 Mg [ 172 ] , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) [ 173 ] , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) [ 174 ] , Human Albumin Solution Ip 20% [ 175 ] , Rh-Erythropoetin Inj Ip 10000 Iu [ 176 ] , Rh-Erythropoetin Inj Ip 2000Iu [ 177 ] , Rh-Erythropoetin Inj 4000 Iu [ 179 ] , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) [ 180 ] , Amiodarone Tab Ip 100 Mg [ 181 ] , Amiodarone Tab Ip 200 Mg [ 182 ] , Amiodarone Hydrochloride Inj 50 Mg / Ml [ 183 ] , Amlodipine Tab Ip 2.5 Mg [ 184 ] , Amlodipine Tablets Ip 5 Mg [ 185 ] , Atenolol Tab Ip 50 Mg [ 186 ] , Atorvastatin Tab Ip 10Mg [ 187 ] , Clopidogrel Tab Ip 75 Mg [ 188 ] , Digoxin Inj Ip 0.25 Mg / Ml [ 189 ] , Digoxin Tab Ip 0.25 Mg. [ 190 ] , Diltiazem Tabs Ip 30 Mg Film Coated [ 191 ] , Dobutamine Inj Ip 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Ip 250 Mg / 5Ml ( Amp ) [ 192 ] , Dopamine Hydrochloride Inj Ip 40 Mg / Ml [ 193 ] , Enalapril Maleate Tab Ip 5Mg [ 194 ] , Enalapril Maleate Tab Ip 2.5Mg [ 195 ] , Isosorbide Dinitrate Tab Ip 5 Mg [ 197 ] , Isosorbide Mononitrate Tabs Ip 20 Mg [ 198 ] , Lisinopril Tab Ip 5 Mg [ 199 ] , Losartan Tab Ip 50 Mg [ 200 ] , Magnesium Sulphate Inj. Ip 500Mg / Ml ( 50%W / V ) [ 201 ] , Methyldopa Tab Ip 250Mg Film Coated [ 202 ] , Nifedipine Cap Ip 5Mg [ 203 ] , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) [ 204 ] , Nitroglycerin Inj 5 Mg / Ml [ 205 ] , Propranolol Tab Ip 40 Mg [ 207 ] , Streptokinase Injection 15 Lac Units Ip [ 209 ] , Verapamil Tab Ip 40 Mg Film Coated [ 211 ] , Acyclovir Cream 5% [ 213 ] , Glycerin Ip 400 Gm [ 217 ] , Liquid Paraffin Ip 400 Ml [ 218 ] , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O [ 219 ] , Miconazole Nitrate Cream Ip 2% [ 220 ] , Povidone Iodine Ointment 5% 15 Gm [ 221 ] , Povidone Iodine Solution Ip 5 % 500 Ml [ 222 ] , Neomycin Bacitracin And Sulphacetamide Powder ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) [ 223 ] , Silver Sulphadiazine Cream Ip 1% 50Gm Tube [ 224 ] , Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) [ 225 ] , Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) [ 226 ] , Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip [ 227 ] , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) [ 232 ] , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) [ 233 ] , Tropicamide Eye Drop Ip 1O / O [ 241 ] , Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit [ 242 ] , Compound Benzoin Tincture Ip [ 244 ] , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) [ 245 ] , Gentian Violet Topical Solution Usp 1O / O [ 246 ] , Gluteraldehyde Solution 2% [ 247 ] , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) [ 248 ] , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) [ 249 ] , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) [ 250 ] , Surgical Spirit Ip ( 500 Ml ) [ 252 ] , Acetazolamide Tab Ip 250Mg [ 253 ] , Frusemide Tab Ip 40 Mg [ 254 ] , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) [ 255 ] , Hydrochlorthiazide Tab Ip 12.5 Mg [ 256 ] , Spironolactone Tab Ip 25Mg [ 258 ] , Torsemide Tab 10 Ip Mg [ 259 ] , Bisacodyl Tab Ip 5 Mg [ 262 ] , Dicyclomine Tab Ip 10 Mg [ 263 ] , Dicyclomine Inj Ip 10 Mg / Ml [ 264 ] , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml [ 265 ] , Domperidone Suspension Ip 5Mg / 5Ml [ 266 ] , Domperidone Tab Ip 10 Mg [ 267 ] , Hyoscine Butylbromide Inj Ip 20 Mg / Ml [ 268 ] , Loperamide Tab Ip 2 Mg [ 269 ] , Metoclopramide Inj Ip 10Mg / 2Ml [ 270 ] , Metoclopramide Tab Ip 10 Mg [ 271 ] , Omeprazole Cap Ip 20 Mg [ 272 ] , Ondansetron Inj Ip 2Mg / Ml [ 273 ] , Ors Powder Ip [ 274 ] , Pentoprazole Inj 40 Mg [ 275 ] , Ranitidine Hcl Injection Ip 50Mg / 2Ml [ 276 ] , Ranitidine Tab Ip 150Mg Film Coated [ 277 ] , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O [ 278 ] , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) [ 279 ] , Carbimazole Tabs Ip 5 Mg ( Film Coated ) [ 280 ] , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg / Ml [ 281 ] , Clomifene Tab Ip 25 Mg [ 282 ] , Clomiphene Tab Ip 50 Mg [ 283 ] , Conjugated Estrogen Tabs Usp 0.625 Mg. [ 284 ] , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe [ 285 ] , Ethinyloestradiol Tabs Ip 50 Mcg [ 286 ] , Glibenclamide Tab Ip 5 Mg [ 287 ] , Gliclazide Tab Ip 40 Mg [ 288 ] , Glimepiride Tab Ip 2 Mg [ 289 ] , Glimepiride Tab Ip 1Mg [ 290 ] , Glipizide Tab Ip 5Mg [ 291 ] , Hydroxyprogesterone Inj Ip 250Mg / Ml [ 293 ] , Isophane Insulin Inj Ip 40 Iu / Ml [ 294 ] , Metformin Tab Ip 500 Mg ( Film Coated ) [ 295 ] , Norethisterone Tab Ip 5 Mg [ 296 ] , Pioglitazone Tab Ip 15 Mg [ 297 ] , Progesterone Inj 200 Mg / 2Ml [ 298 ] , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) [ 300 ] , Thyroxine Sodium Tablets Ip 100Mcg [ 301 ] , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) [ 303 ] , Human Anti D Immunoglobulin 150 Mcg [ 304 ] , Human Rabies Immunoglobulin Inj 150 Iu / Ml [ 305 ] , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu [ 306 ] , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose [ 307 ] , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) [ 308 ] , Tetanus Immunoglobulin Ip 250 Iu / Vial [ 309 ] , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial [ 310 ] , Atracurium Inj 10 Mg / Ml [ 311 ] , Glycopyrrolate Inj Ip 0.2 Mg / Ml [ 312 ] , Midazolam Inj Ip 1 Mg / Ml [ 313 ] , Neostigmine Inj Ip 0.5 Mg / Ml [ 314 ] , Neostigmine Tab Ip 15 Mg [ 316 ] , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) [ 317 ] , Valethamate Bromide Inj 8Mg / Ml [ 318 ] , Atropine Eye Ointment Ip 1% [ 319 ] , Atropine Sulphate Ophthalmic Solution Usp 1% [ 320 ] , Chloramphenicol Eye Drops Ip 0.5 0 / 0 [ 321 ] , Ciprofloxacin Eye Drops Ip 0.3 O / O W / V [ 322 ] , Ciprofloxacin Ophthalmic Ointment Usp 0.3% [ 323 ] , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml [ 324 ] , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O [ 330 ] , Tobramycin Eye Drops 0.3% [ 331 ] [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% [ 332 ] , Isoxsuprine Inj Ip 5 Mg / Ml [ 333 ] , Isoxsuprine Tab Ip 20 Mg [ 334 ] , Methylergometrine Inj Ip 0.2 Mg / Ml [ 335 ] , Methylergometrine Tab Ip 0.125 Mg [ 336 ] , Misoprostol Tab Ip 200 Mcg [ 337 ] , Oxytocin Inj Ip 5 Iu / Ml [ 338 ] , Alprazolam Tab Ip 0.25 Mg [ 339 ] , Alprazolam Tab Ip 0.5Mg [ 340 ] , Amitriptyline Tab Ip 25Mg Film Coated [ 341 ] , Chlordiazepoxide Tablets Ip 10Mg [ 342 ] , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) [ 343 ] , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) [ 344 ] , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) [ 345 ] , Chlorpromazine Inj. Ip 25Mg / Ml [ 346 ] , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) [ 349 ] , Diazepam Tab Ip 5 Mg [ 350 ] , Escitalopram Tab Ip 10 Mg [ 351 ] , Fluoxetine Cap Ip 20 Mg [ 352 ] , Haloperidol Inj Ip 5 Mg / Ml [ 353 ] , Haloperidol Tab Ip 1.5 Mg [ 354 ] , Haloperidol Tab Ip 5 Mg [ 355 ] , Imipramine Tab Ip 25 Mg ( Coated Tab ) [ 356 ] , Imipramine Tab Ip 75 Mg ( Coated ) [ 357 ] , Lithium Carbonate Tab Ip 300 Mg [ 358 ] , Lorazepam Inj Ip 2 Mg / Ml [ 359 ] , Olanzapine Tab Ip 5 Mg [ 360 ] , Risperidone Tab 2Mg [ 361 ] , Risperidone Tab 1 Mg [ 362 ] , Sertraline Tab Ip 50 Mg [ 363 ] , Trifluperazine Tab Ip 5 Mg Coated [ 364 ] , Aminophylline Inj Ip 25 Mg / Ml [ 365 ] , Beclomethasone Inhalation Ip 200 Mcg / Dose [ 366 ] , Budesonide Nebulizer Suspension 0.25Mg / Ml [ 367 ] , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S. [ 368 ] , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml [ 369 ] , Salbutamol Tablet Ip 4 Mg [ 370 ] , Salbutamol Inhalation 100 Mcg / Dose [ 371 ] , Salbutamol Nebuliser Solution Bp 5 Mg / Ml [ 372 ] , Salbutamol Tab Ip 2 Mg [ 373 ] , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) [ 374 ] , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) [ 375 ] , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) [ 376 ] , Compound Sodium Lactate Inj. Ip [ 377 ] , Dextrose Inj Ip 25% W / V [ 378 ] , Dextrose Inj Ip 10% [ 379 ] , Dextrose Inj Ip 5% [ 380 ] , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection ) [ 381 ] , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) [ 382 ] , Potassium Chloride Inj. 0.15 Gm / Ml [ 383 ] , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml [ 384 ] , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O [ 385 ] , Sodium Chloride Inj Ip 500 Ml [ 386 ] , Ascorbic Acid Tab Ip 500 Mg [ 387 ] , Calcium Gluconate Inj Ip 10% ( Iv Use ) [ 388 ] , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg [ 390 ] , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg [ 391 ] , Folic Acid Tab Ip 5 Mg [ 392 ] , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg [ 393 ] , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg [ 394 ] , Vitamin B Complex Inj Nfi [ 395 ] , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) [ 397 ] , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii [ 398 ] , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can [ 399 ] , Peritonial Dialysis Solution Ip [ 401 ] , Sodium Bicarbonate Inj Ip 7.5% W / V [ 402 ] , Water For Inj Ip [ 404 ] , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion [ 405 ] , Factor Ix Concentrate ( Purified ) Ip 600 I.U. ( Human Coagulation Factor Ix ) [ 406 ] , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) [ 408 ] , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu [ 409 ] , Labetalol Tab Ip 100Mg [ 410 ] , Labetalol Hcl Inj Ip 20Mg / 4Ml [ 411 ] , Ampicillin Cap Ip 500Mg [ 412 ] , Nitrofurantoin Tab Ip 100Mg [ 413 ] , Hyoscine Butyl Bromide Tablets Ip 10Mg [ 414 ] , Drotaverine Tab Ip 40 Mg [ 415 ] , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion [ 416 ] , Cloxacillin Sodium Inj Ip 500Mg [ 417 ] , Betamethasone Sod Phos Inj Ip 4Mg / Ml [ 418 ] , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) [ 419 ] , Phenobarbitone Inj Ip 200Mg / Ml [ 420 ] , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V [ 421 ] , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. [ 423 ] , Lidocaine Hcl Topical Solution Usp 4% [ 424 ] , Fluconazole Eye Drops 0.3% [ 425 ] , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml [ 427 ] , Ofloxacin Oral Suspension Ip 50Mg / 5Ml [ 428 ] , Tinidazole Tab Ip 300 Mg ( Film Coated ) [ 430 ] , Tinidazole Tab Ip 500 Mg ( Film Coated ) [ 431 ] , Salbutamol Syrup Ip 2Mg / 5Ml [ 432 ] , Ranitidine Tab Ip 300Mg Film Coated [ 433 ] , Indomethacin Cap Ip 25 Mg [ 436 ] , Diclofence Prolonged Release Tablet Ip 100 Mg [ 437 ] , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg [ 438 ] , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml [ 440 ] , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) [ 441 ] , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) [ 442 ] , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) [ 443 ] , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) [ 444 ] , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) [ 445 ] , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) [ 446 ] , Chlorhexidine Gluconate Solution 5% 250 Ml [ 447 ] , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg [ 448 ] , Surgical Spirit Ip ( 100 Ml ) [ 449 ] , Povidone Iodine Solution Ip 5% 100Ml Bottle [ 450 ] , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg [ 451 ] , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) [ 452 ] , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) [ 452 ] , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) [ 453 ] , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg [ 454 ] , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets Ip ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) [ 455 ] , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg [ 456 ] , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) [ 457 ] , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) [ 458 ] , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) [ 459 ] , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg [ 460 ] , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) [ 461 ] , Atenolol Tab Ip 25 Mg [ 462 ] , Enalapril Maleate Tablets Ip 10 Mg [ 463 ] , Hydrochlorthiazide Tab Ip 25Mg [ 464 ] , Lisinopril Tablets Ip 10 Mg [ 465 ] , Lisinopril Tab Ip 2.5 Mg [ 466 ] , Losartan Tab Ip 25 Mg [ 467 ] , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg [ 468 ] , Prednisolone Tablet Ip 10 Mg [ 469 ] , Prednisolone Tab Ip 20 Mg [ 470 ] , Torsemide Inj 10 Mg / Ml [ 471 ] , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg [ 472 ] , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml [ 473 ] , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml [ 474 ] , Cefpodoxime Dispersible Tab 50 Mg [ 475 ] , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) [ 476 ] , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml [ 477 ] , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml [ 478 ] , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml [ 479 ] , Diphtheria Antitoxin 10000 Iu [ 480 ] , Meropenem Inj. Ip 1Gm [ 481 ] , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml [ 482 ] , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg [ 483 ] , Timolol Eye Drops Ip 0.5 O / O W / V [ 484 ] , Homatropine Eye Drops Ip 2% [ 485 ] , Travoprost Eye Drops Ip 0.004 O / O [ 486 ] , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% [ 487 ] , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg [ 488 ] , Sevoflurane [ 491 ] , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg [ 492 ] , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% [ 493 ] , Etoricoxib Tab Ip 120Mg [ 495 ] , Mefenamic Acid Tablets Bp 500 Mg [ 496 ] , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg [ 497 ] , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab [ 498 ] , Cetirizine Syrup Ip 5Mg / 5 Ml [ 499 ] , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml [ 500 ] , Acyclovir Intravenous Infusion Ip 500Mg [ 503 ] , Amikacin Inj Ip 250 Mg [ 504 ] , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg [ 505 ] , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm [ 506 ] , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) [ 507 ] , Cefepime Injection Ip 500 Mg [ 510 ] , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) [ 511 ] , Cefuroxime Axetil Tab Ip 250 Mg [ 512 ] , Clindamycin Capsule Ip 150Mg [ 513 ] , Clindamycin Capsule Ip 300 Mg [ 514 ] , Levofloxacin Tablets Ip 250 Mg [ 515 ] , Linezolid Tablets Ip 600 Mg [ 516 ] , Linezolid Inj 200Mg / 100Ml [ 517 ] , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg [ 520 ] , Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) [ 521 ] , Vancomycin For Intravenous Infusion Ip 500 Mg [ 523 ] , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit [ 525 ] , Carboplatin Injection Ip 150 Mg [ 526 ] , Carboplatin Injection Ip 450 Mg [ 527 ] , Cisplatin Inj Ip 10 Mg / 10 Ml [ 528 ] , Dacarbazine Injection 500 Mg Usp / Bp [ 529 ] , Filgrastim Injection Ip ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcg [ 530 ] , Gemcitabine For Injection 200 Mg [ 531 ] , Gemcitabine For Injection Ip 1Gm [ 532 ] , Ifosfamide Injection Ip / Bp / Usp 1Gm [ 533 ] , Imatinib Tab Ip 400Mg [ 534 ] , Methotrexate Tablets Ip 10 Mg [ 536 ] , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg [ 537 ] , Oxaliplatin Injection Usp 50 Mg [ 538 ] , Betahistine Tab Ip 8 Mg [ 541 ] , Betahistine Tab Ip 16 Mg [ 542 ] , Cinnarizine Tablets Ip 25 Mg [ 543 ] , Cinnarizine Tablet Ip 75 Mg [ 544 ] , Tranexamic Acid Tablets Ip 500 Mg [ 545 ] , Warfarin Sodium. Tab Ip 5Mg [ 546 ] , Adenosine Injection Ip 6 Mg / 2Ml [ 547 ] , Atorvastatin Tablets Ip 40 Mg [ 548 ] , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg [ 549 ] , Fenofibrate Capsules / Tab Ip 200 Mg [ 550 ] , Isoprenaline Injection Ip 2Mg / Ml [ 551 ] , Metoprolol Tablets Ip 25 Mg [ 552 ] , Metoprolol Succinate Extended Release Tablets Ip 50 Mg [ 553 ] , Noradrenaline Injection Ip 2 Mg / Ml [ 554 ] , Prazosin Tablets ( Extended Release ) 2.5 Mg [ 555 ] , Telmisartan Tablets Ip 40 Mg [ 556 ] , Urokinase Injection 5 Lac Unit ( Lyophilized ) [ 557 ] , Betamethasone Dipropionate Cream Ip 0.05% [ 558 ] , Betamethasone Lotion Ip 0.05 O / O [ 559 ] , Clindamycin Phosphate Gel Usp 1 O / O [ 560 ] , Clobetasol Propionate Cream Ip 0.05 O / O [ 561 ] , Glycerin Ip 100 Ml [ 564 ] , Ketoconazole Cream 2% [ 565 ] , Permethrin Lotion 5% [ 568 ] , Permethrin Cream 5% [ 569 ] , Tretenoin Cream Usp 0.025% [ 570 ] , Povidone Iodine Ointment Usp 250 Gm [ 571 ] , Povidone Iodine Solution Ip 10 % [ 572 ] , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar [ 573 ] , Spironolactone Tablets Ip 50 Mg [ 574 ] , Finasteride Tablets Ip 5 Mg [ 575 ] , Tamsulosin Hcl Tablets / Capsule 0.4 Mg [ 576 ] , Flavoxate Tablets Ip 200 Mg ( Coated Tablet ) [ 579 ] , Chlorhexidine Mouthwash Ip 0.2 O / O [ 580 ] , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) [ 581 ] , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) [ 582 ] , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% [ 583 ] , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel [ 584 ] , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp [ 585 ] , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops [ 586 ] , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp [ 588 ] , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O [ 589 ] , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) [ 590 ] , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg [ 591 ] , Lactic Acid Bacillus Tab 60 Million Spores [ 592 ] , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml [ 593 ] , Liquid Paraffin Ip 100 Ml [ 594 ] , Ondansetron Orally Disintegrating Tablets Ip 4Mg [ 595 ] , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets [ 596 ] , Ursodeoxycholic Acid Tablets Ip 300 Mg [ 597 ] , Allopurinol Tablets Ip 100 Mg [ 598 ] , Hydroxychloroquine Sulphate Tablets 200Mg [ 599 ] , Leflunomide Tablets Ip 10Mg ( Film Coated ) [ 600 ] , Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) [ 601 ] , Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip [ 602 ] , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) [ 603 ] , Medroxyprogesterone Acetate Tablets Ip 10 Mg [ 605 ] , Thyroxine Tablets Ip 50 Mcg [ 607 ] , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) [ 610 ] , Betaxolol Eye Drops 0.5 O / O [ 612 ] , Carboxymethylcellulose Eye Drops Ip 0.5% [ 613 ] , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% [ 614 ] , Mifepristone Tab Ip 200Mg [ 615 ] , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg [ 616 ] , Budesonide Powder For Inhalation 200 Mcg [ 617 ] , Ipratropium Powder For Inhalation Ip 40 Mcg [ 618 ] , Terbutaline Tablets Ip 2.5 Mg [ 619 ] , Terbutaline Tablets Ip 2.5 Mg [ 619 ] , Xylometazoline Nasal Drops Ip 0.1% [ 620 ] , Sodium Chloride Injection Ip 100 Ml [ 621 ] , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) [ 622 ] , Cholecalciferol Granules 60, 000 Iu / Gm [ 623 ] , Mecobalamin Inj 500 Mcg / Ml [ 624 ] , Pyridoxine Tablet Ip 10 Mg [ 626 ] , Pyridoxine Tablet Ip 40Mg [ 627 ] , Thiamine Tablets Ip 100 Mg [ 629 ] , Calcitriol Capsules Ip 0.25 Mcg [ 630 ] , Normal Human Intravenous Immunoglobulin 5G / 100Ml [ 633 ] , Pregabalin Cap Ip 75 Mg [ 634 ] , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) [ 635 ] , Ramipril Tablets Ip 2.5 Mg [ 636 ] , Neostigmine Injection Ip 2.5Mg / 5Ml [ 638 ] , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) [ 639 ] , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) [ 640 ] , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) [ 641 ] , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) [ 642 ] , Vitamin K-1 ( Phytomenadione ) Ip 1Mg / 0.5Ml Injection ( Detail In Rc ) [ 644 ] , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) [ 645 ] , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) [ 646 ] , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) [ 647 ] , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) [ 648 ] , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg [ 649 ] , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets [ 650 ] , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) [ 651 ] , Methyl Cobalmine Tablet 500Mcg [ 652 ] , Methyl Cobalmine Tablet 1500Mcg [ 653 ] , Atropine Sulphate Injection 0.6Mg / Ml [ 654 ] , Fentanyl Citrate Injection 50Mcg / Ml [ 655 ] , Naproxen Tablet Ip 500Mg [ 656 ] , Naproxen Tablet Ip 250Mg [ 657 ] , Etoricoxib Tablet 90 Mg [ 658 ] , Levoceitrizine Tablet 5Mg [ 659 ] , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) [ 660 ] , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg [ 661 ] , Clobazam Tablet / Capsule 5 Mg [ 662 ] , Clobazam Tablet / Capsule 10 Mg [ 663 ] , Levetiracetam Tablet Ip 500 Mg [ 664 ] , Levetiracetam Oral Solution / Suspension 100Mg / Ml [ 665 ] , Levetiracetam Injection 500Mg / 5Ml [ 666 ] , Gabapentine Tablet / Capsule 100Mg [ 667 ] , Gabapentine Tablet / Capsule 300Mg [ 668 ] , Co-Trimoxazole Tablet Ip ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) [ 669 ] , Coal Tar 6% & Salicylic Acid 3% Ointment [ 670 ] , Calamine Lotion Ip 100Ml [ 671 ] , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. [ 672 ] , Vitamin D3 Oral Solution 60000 Iu [ 676 ] , Cyclosporin Capsule Usp / Ip 50 Mg [ 677 ] , Clonazepam Tablet 0.5 Mg [ 678 ] , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg [ 679 ] , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges [ 680 ] , Tenaligliptin Tablet Ip 20Mg [ 682 ] , Framycetin Sulphate Cream 1 O / O 30Gm Pack [ 684 ] , Framycetin Sulphate Cream 1 O / O 100 Gm Pack [ 685 ] , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) [ 686 ] , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans [ 687 ] , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial [ 688 ] , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial [ 689 ] , Cough Syrup / Expectorant ( 50 ) Ml [ 692 ] , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle [ 693 ] , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle [ 693 ] , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size [ 694 ] , Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use [ 695 ] , Paracetamol Infusion Ip 1% W / V 100Ml Size [ 696 ] , Ketorolac Tromethamine Dispersible Tablet 10 Mg ( Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg ) [ 697 ] , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) [ 698 ] , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) [ 699 ] , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) [ 700 ] , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg ) [ 701 ] , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) [ 702 ] , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) [ 703 ] , Topiramate Tablet Ip 25 Mg ( Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) [ 705 ] , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg [ 706 ] , Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection [ 708 ] , Cefadroxil Dispersible Tablet 250 Mg ( Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg ) [ 709 ] , Cefadroxil Tablet 500 Mg [ 710 ] , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size [ 711 ] , Levofloxacin Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) [ 712 ] , Clindamycin Phosphate Injection Ip 300 Mg [ 714 ] , Terbinafine Hydrochloride Tablet 250 Mg [ 721 ] , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) [ 727 ] , Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) [ 728 ] , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg ) [ 729 ] , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) [ 733 ] , Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) [ 741 ] , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) [ 742 ] , Zoledronic Acid Injection Ip 4Mg Vial [ 743 ] , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size [ 744 ] , Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) [ 745 ] , Feracrylum 1% W / V Sterile Solution 100 Ml [ 746 ] , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size [ 747 ] , Clonidine Hydrochloride Tablet Ip 0.1 Mg ( Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg ) [ 751 ] , Sotalol Hydrochloride Tablet Usp / Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40Mg ) [ 752 ] , Esmolol Hydrochloride Injection 10Mg / Ml 10Ml Size [ 753 ] , Carvedilol Tablet 3.125 Mg [ 755 ] , Rosuvastatin Tablet Ip 20 Mg ( Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg ) [ 756 ] , Rosuvastatin Tablet 10 Mg [ 757 ] , Sacubitril 24 Mg And Valsartan 26 Mg Tablet [ 758 ] , Powder Clotrimazole 1% W / W 30 Gm [ 759 ] , Terbinafine Cream 1%W / W ( 10 Gm Tube ) [ 760 ] , Oitment Mupirocin Ip 2% [ 762 ] , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) [ 763 ] , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size [ 764 ] , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) [ 765 ] , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) [ 766 ] , Hepatitis B Immunologlobin Injection Ip 200 I.U [ 767 ] , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size [ 769 ] , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size [ 770 ] , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size [ 771 ] , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) / Natural Micronised Progesteron Tablet 200 Mg ( Each Tablet Contains Progesteron Ip 200 Mg ) [ 772 ] , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) [ 773 ] , Human Chorionic Gonadotropin Injection Ip 5000 I.U. [ 774 ] , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) [ 777 ] , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) [ 778 ] , Zolpidem Tablet 5 Mg [ 779 ] , Acebrophylline Tablet / Capsule 100 Mg [ 780 ] , Ringer Acetate Infusion 500 Ml [ 781 ] , Sodium Chloride 0.45% W / V Polypack 500 Ml [ 782 ] , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) [ 784 ] , Phenazopyridine Tablet 5 Mg [ 786 ] , Dutasteride Tablet 0.5 Mg [ 787 ] , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) [ 788 ] , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size [ 789 ] , Multi Vitamin Syrup [ 790 ] , Pyridostigmine Tablet Ip 60 Mg ( Each Tablet Contains Pyridostigmine Ip 60 Mg ) [ 792 ] , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size [ 793 ] , Vitamin E Capsule 400 Mg [ 795 ] , Inj Poractant Alpha 80 Mg / Ml In Pack Of 1.5 Ml ( Detail In Rc ) [ 796 ] , Liquid Medical Oxygen ( Lmo ) [ 799 ] , Liposomol Amphotericine Injection B 50Mg [ 800 ] , Multistix Test Strip [ 801 ] , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml [ 100A ] , Fluconazole Tablets Ip 150Mg [ 114A ] , Cetrimide Cream Ip 15 Gm [ 215A ] , Fusidic Acid Cream Ip 2% [ 216A ] , Mannitol Inj Ip 20% W / V [ 257A ] , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil [ 260A ] , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg [ 261A ] , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets [ 439A ] , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) [ 508A ] , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) [ 642A ] , Albendazole Tablets Ip 400 Mg [ 66A ] , Azithromycin Tab 100 Mg Dispersible Tabs ( 3 Tab Strip 10X3x3 ) [ 78A ] , Azithromycin Tablets Ip 250Mg [ 79A ] , Azithromycin Tab Ip 500 Mg [ 80A ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 [ R1 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 [ R2 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 [ R3 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 [ R4 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 [ R5 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 [ R6 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 [ R7 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm [ R9 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm [ R10 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm [ R11 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm [ R12 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm [ R13 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed [ R14 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) [ R15 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm [ R16 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) [ R17 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm [ R18 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm [ R19 ] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) [ R20 ] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) [ R21 ] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) [ R22 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) [ R23 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) [ R24 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) [ R27 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) [ R28 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) [ R32 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) [ R33 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) [ R34 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm [ R37 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) [ R38 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) [ R44 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) [ R45 ] , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) [ R64 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) [ R67 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm [ R68 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm [ R69 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm [ R70 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm [ R71 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm [ R72 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm [ R73 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm [ R74 ] , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 ( Details In Rc ) [ R76 ] , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 ( Details In Rc ) [ R77 ] , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 ( Details In Rc ) [ R78 ] , B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 ( Details In Rc ) [ R79 ] , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 ( Details In Rc ) [ R80 ] , Absorbable Gelatin Sponge 80 X 50X 10Mm ( Details In Rc ) [ S1 ] , Infant Feeding Tube Size 10Fg ( Details In Rc ) [ S10.A ] , Infant Feeding Tube Size 8Fg ( Details In Rc ) [ S10.B ] , Infant Feeding Tube Size 5Fg ( Details In Rc ) [ S10.C ] , Oxygen Mask ( Adult ) [ S100 ] , Oxygen Mask ( Pediatric ) [ S101 ] , Foleys Catheter No. 14 ( Detail In Rc ) [ S102 ] , Nelaton Catheter Size 14 Fg ( Detail In Rc ) [ S103 ] , Ecg Electrode ( Detail In Rc ) [ S104 ] , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 ( Detail In Rc ) [ S105 ] , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml ( Detail In Rc ) [ S106 ] , Urethral Catheter 90 ( Fg-14 ) Made Up Of Medical Grade Pvc ( Detail In Rc ) [ S107 ] , Urethral Catheter 91 ( Fg-10 ) , Made Up Of Medical Grade Pvc ( Detail In Rc ) [ S108 ] , Vaccum Suction Set, 2.5 Meter Length ( Detail In Rc ) [ S109 ] , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable ( Details In Rc ) [ S11 ] , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements ( Detail In Rc ) [ S119 ] , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable ( Details In Rc ) [ S12 ] , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 10Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) [ S120 ] , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 50Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) [ S121 ] , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 100Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) [ S122 ] , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 150Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) [ S123 ] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) ( Detail In Rc ) [ S124 ] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) ( Detail In Rc ) [ S125 ] , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) [ S126 ] , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) [ S127 ] , Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G ( Detail In Rc ) [ S128 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Ventilator Without Vent ( Detail In Rc ) [ S129 ] , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable ( Details In Rc ) [ S13 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc ) [ S130 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent ( Detail In Rc ) [ S131 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Bipap With Vent ( Detail In Rc ) [ S132 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support ( Detail In Rc ) [ S133 ] , Nebulization Mask Adult ( Detail In Rc ) [ S134 ] , Nebulization Mask Paediatric ( Detail In Rc ) [ S135 ] , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 [ S14 ] , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G ( Details In Rc ) [ S15.A ] , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G ( Details In Rc ) [ S15.B ] , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G ( Details In Rc ) [ S15.C ] , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G ( Details In Rc ) [ S15.D ] , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc ) [ S15.E ] , Mucus Extractor Sterile ( Details In Rc ) [ S16 ] , Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc ) [ S17.A ] , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics ( Details In Rc ) [ S17.B ] , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape [ S18 ] , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape [ S19 ] , Absorbent Cotton Wool Ip 500 Gm [ S2 ] , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape [ S20 ] , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll [ S21 ] , Plaster Of Paris Bandage 10Cm X 2.7Mts [ S22 ] , Ryles Tube / Nasogastric Tube Size: 10 ( Details In Rc ) [ S23.A ] , Ryles Tube / Nasogastric Tube Size: 12 ( Details In Rc ) [ S23.B ] , Ryles Tube / Nasogastric Tube Size:14 ( Details In Rc ) [ S24.A ] , Ryles Tube / Nasogastric Tube Size: 16 ( Details In Rc ) [ S24.B ] , Ryles Tube / Nasogastric Tube Size: 18 ( Details In Rc ) [ S24.C ] , Scalp Vein Set ( Disposable ) Size 18G ( Details In Rc ) [ S25.A ] , Scalp Vein Set ( Disposable ) Size 20G ( Details In Rc ) [ S25.B ] , Scalp Vein Set ( Disposable ) Size 22G ( Details In Rc ) [ S25.C ] , Scalp Vein Set ( Disposable ) Size 24 G ( Details In Rc ) [ S25.D ] , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) [ S26 ] , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) [ S27 ] , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) [ S28 ] , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) [ S29 ] , Asepto Syringe With Transparent Bulb Sterile, 60 Ml [ S3 ] , Surgical Blade Sterile, Size 11 ( Details In Rc ) [ S30.A ] , Surgical Blade Sterile, Size 15 ( Details In Rc ) [ S30.B ] , Surgical Blade Sterile, Size 22 ( Details In Rc ) [ S30.C ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 ( Details In Rc ) [ S31 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 ( Details In Rc ) [ S32 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 ( Details In Rc ) [ S33 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 ( Details In Rc ) [ S34 ] , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 ( Details In Rc ) [ S35 ] , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 ( Details In Rc ) [ S36 ] , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 ( Details In Rc ) [ S37 ] , Suture Needles Curved And Cutting Size 1-5 ( Details In Rc ) [ S38 ] , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch ( Details In Rc ) [ S39.A ] , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch ( Details In Rc ) [ S39.B ] , Blood Administration Set Blood Transfusion Set ( Details In Rc ) [ S4 ] , Urine Collecting Bag, Disposable 2000 Ml ( Details In Rc ) [ S40 ] , Endotracheal Tube, Plain - Size 2.5 ( Details In Rc ) [ S43.A ] , Endotracheal Tube, Plain - Size 3 ( Details In Rc ) [ S43.B ] , Endotracheal Tube, Plain - Size 3.5 ( Details In Rc ) [ S43.C ] , Endotracheal Tube, Plain - Size 4 ( Details In Rc ) [ S43.D ] , Endotracheal Tube, Plain - Size 4.5 ( Details In Rc ) [ S43.E ] , Endotracheal Tube, Plain - Size 5 ( Details In Rc ) [ S43.F ] , Endotracheal Tube, Plain - Size 5.5 ( Details In Rc ) [ S43.G ] , Endotracheal Tube, Plain - Size 6 ( Details In Rc ) [ S43.H ] , Endotracheal Tube, Plain -Size 6.5 ( Details In Rc ) [ S43.I ] , Endotracheal Tube, Plain - Size 7 ( Details In Rc ) [ S43.J ] , Endotracheal Tube, Plain - Size 7.5 ( Details In Rc ) [ S43.K ] , Endotracheal Tube, Plain - Size 8 ( Details In Rc ) [ S43.L ] , Endotracheal Tube, Plain - Size 8.5 ( Details In Rc ) [ S43.M ] , Endotracheal Tube, Cuffed - Size 4 ( Details In Rc ) [ S44.A ] , Endotracheal Tube, Cuff - Size 4.5 ( Details In Rc ) [ S44.B ] , Endotracheal Tube, Cuff - Size 5 Details In Rc [ S44.C ] , Endotracheal Tube, Cuff - Size 6 ( Details In Rc ) [ S44.D ] , Endotracheal Tube, Cuff- Size 6.5 ( Details In Rc ) [ S44.E ] , Endotracheal Tube, Cuff - Size 7 ( Details In Rc ) [ S44.F ] , Endotracheal Tube, Cuff - Size 7.5 ( Details In Rc ) [ S44.G ] , Endotracheal Tube, Cuff - Size 8 ( Details In Rc ) [ S44.H ] , Endotracheal Tube, Cuff - Size 8.5 ( Details In Rc ) [ S44.I ] , Endotracheal Tube, Cuff - Size 9 ( Details In Rc ) [ S44.J ] , Tracheostomy Tube, Plain - All Sizes ( Details In Rc ) [ S45 ] , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes ( Details In Rc ) [ S46 ] , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc ) [ S47.A ] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 ( Details In Rc ) [ S47.B ] , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 ( Details In Rc ) [ S47.C ] , Corrugated Drainage Sheet - All Sizes ( Details In Rc ) [ S48 ] , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S5.A ] , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S5.B ] , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S6.A ] , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S6.B ] , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S7.A ] , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) ( Details In Rc ) [ S7.B ] , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm [ S73 ] , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm [ S74 ] , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm ( Details In Rc ) [ S79 ] , Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc ) [ S8.A ] , Suction Catheter, Sterile. Size: F G-6 ( Details In Rc ) [ S8.B ] , Suction Catheter, Sterile. Size: F G-8 ( Details In Rc ) [ S8.C ] , Suction Catheter, Sterile. Size: F G-10 ( Details In Rc ) [ S8.D ] , Suction Catheter, Sterile. Size: F G-12 ( Details In Rc ) [ S8.E ] , Suction Catheter, Sterile. Size: F G-14 ( Details In Rc ) [ S8.F ] , Suction Catheter, Sterile. Size: F G-16 ( Details In Rc ) [ S8.G ] , Suction Catheter, Sterile. Size: F G-18 ( Details In Rc ) [ S8.H ] , Suction Catheter, Sterile. Size: F G-20 ( Details In Rc ) [ S8.I ] , Suction Catheter, Sterile. Size: F G-22 ( Details In Rc ) [ S8.J ] , Bone Wax Sterilised [ S80 ] , Skin Graft Knife Blade ( Sterile ) ( Details In Rc ) [ S82 ] , K Wire, Length 375 Mm; 1Mm ( Details In Rc ) [ S84.A ] , K Wire, Length 375 Mm; 1.6Mm ( Details In Rc ) [ S84.B ] , K Wire, Length 375 Mm; 1.8Mm ( Details In Rc ) [ S84.C ] , Face Mask, Disposable ( Details In Rc ) [ S85 ] , Surgical Cap Disposable ( For Surgeons ) ( Details In Rc ) [ S86.A ] , Surgical Cap, Disposable ( For Nurses ) ( Details In Rc ) ( Details In Rc ) [ S86.B ] , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 11 To 17.5 [ S87.A ] , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 18 To 24 [ S87.B ] , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 24.5 To 28.5 [ S87.C ] , Standard Pama Intra Ocular Lenses ( Details In Rc ) 11 To 17.5 [ S88.A ] , Standard Pama Intra Ocular Lenses ( Details In Rc ) 18 To 24 [ S88.B ] , Standard Pama Intra Ocular Lenses ( Details In Rc ) 24.5 To 28.5 [ S88.C ] , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered [ S89.A ] , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free [ S89.B ] , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.A ] , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.B ] , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.C ] , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.D ] , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.E ] , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.F ] , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.G ] , Rubber Examination Gloves, Non-Sterile, Extra Small ( Details In Rc ) [ S90.A ] , Rubber Examination Gloves, Size Small ( Details In Rc ) [ S90.B ] , Rubber Examination Gloves, Size Medium ( Details In Rc ) [ S90.C ] , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large ( Details In Rc ) [ S90.D ] , Pressure Monitoring Line / High Pressure Extension Line ( Details In Rc ) [ S91 ] , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml ( Details In Rc ) [ S92 ] , Umbilical Catheter For New Born, All Sizes - ( Details In Rc ) [ S93 ] , Umbilical Cord Clamp ( Details In Rc ) [ S94 ] , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property ( Details In Rc ) [ S95 ] , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 ( Details In Rc ) [ S96.A ] , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 ( Details In Rc ) [ S96.B ] , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- ( Details In Rc ) [ S97 ] , Bone Cement [ S98 ] , Sanitary Napkin Beltless ( Details In Rc ) [ S99.A ] , Sanitary Pads Belt Type ( Details In Rc ) [ S99.B ] , Sanitary Napkin Beltless With Wings ( Details In Rc ) [ S99.P ] , Drug Name :: Alpha And Lipoic Acid And Leycopen And Multivitamin And Miltiminerals Capsule [ Nrd.3 ] , Drug Name :: Cefpodoxime Proxetil Tablet 100Mg [ Nrd.571 ] , Drug Name :: Chloramphenicol And Polymycin Eye Ointment [ Nrd.122 ] , Drug Name :: Chloramphenicol And Polymycine And Dexamethasone Eye Ointment [ Nrd.123 ] , Drug Name :: Clarithromycin Tablet 500Mg [ Nrd.581 ] , Drug Name :: Compound Sodium Lactate ( Ringer Lactate ) In Glass Bottle 500Ml Injection [ Nrd.197 ] , Drug Name :: Cyproheptadine 200Ml Syrup [ Nrd.491 ] , Drug Name :: Dapagliflozin Tablet 10Mg [ Nrd.599 ] , Drug Name :: Deflazacort Tablet 6Mg [ Nrd.602 ] , Drug Name :: Dexmedetomidine 100Mcg / Ml [ Nrd.215 ] , Drug Name :: Diastase Pepsin With Simethicone 15 Ml Drop [ Nrd.71 ] , Drug Name :: Alpha Beta Arteether 2 Ml Injection [ Nrd.150 ] , Drug Name :: Dorzolamide 2% Eye Drop [ Nrd.101 ] , Drug Name :: Doxycycline For Injection 100 Mg Injection [ Nrd.221 ] , Drug Name :: Drotavarine Syrup [ Nrd.494 ] , Drug Name :: Duloxetine Gastro Resistant Tablet 20Mg [ Nrd.614 ] , Drug Name :: Duloxitine Gastro Resistant Tablet 30Mg [ Nrd.615 ] , Drug Name :: Enzyme Drop [ Nrd.80 ] , Drug Name :: Esomeprazole Tablet 40Mg [ Nrd.624 ] , Drug Name :: Etomidate 20 Mg Injection [ Nrd.231 ] , Drug Name :: Febuxostat Tablet 40Mg [ Nrd.632 ] , Drug Name :: Febuxostat Tablet 80Mg [ Nrd.633 ] , Drug Name :: Anticold Drop [ Nrd.78 ] , Drug Name :: Fluconazole 200 Mg Injection [ Nrd.236 ] , Drug Name :: Formaline Tablet [ Nrd.642 ] , Drug Name :: Gatifloxacin And Prednisolone Eye Drop [ Nrd.103 ] , Drug Name :: Gdw 5% Glass Bottle / 500Ml Injection [ Nrd.247 ] , Drug Name :: Glucosamine And Hydrochloride And Methylsulfonylmethane Capsule [ Nrd.4 ] , Drug Name :: Glucosamine Hydrocloride Tablet And Diacerin 50 Tablet Mg [ Nrd.644 ] , Drug Name :: Hydroxyzine Oral Solution 15 Ml Drop [ Nrd.76 ] , Drug Name :: Ivermectin Tablet 12Mg [ Nrd.651 ] , Drug Name :: Ivermectin Tablet 6Mg [ Nrd.650 ] , Drug Name :: Levofloxacin Oral Solution Syrup [ Nrd.503 ] , Drug Name :: Anti-Oxidants Capsule ( Beta Carotene-10 Mg, Vit-E 25Mg, Vit-C 100 Mg, Copper 1.5 Mg, Managanese 1.5 Mg, Z [ Nrd.11 ] , Drug Name :: Levofloxacine 500Mg / 100 Ml Injection [ Nrd.273 ] , Drug Name :: Levothyroxine Sodium Tablet 25Mcg [ Nrd.665 ] , Drug Name :: Lignocaine 1% Mouth Paint [ Nrd.427 ] , Drug Name :: L-Orinithine L- Aspartate 10 Ml Injection [ Nrd.283 ] , Drug Name :: Luliconazole 1% Cream [ Nrd.55 ] , Drug Name :: Mefenamice Acid 100Mg / 5Ml Syrup [ Nrd.505 ] , Drug Name :: Mephentermine 50Mg / Ml Injection [ Nrd.285 ] , Drug Name :: Methylprednisolon Acetate 40Mg Injection [ Nrd.291 ] , Drug Name :: Methylprednisolone Tablet 16Mg [ Nrd.683 ] , Drug Name :: Methylprednisolone Tablet 8Mg [ Nrd.684 ] , Drug Name :: Aprepitant Capsule 125Mg [ Nrd.12 ] , Drug Name :: Montelucast And Levocetrizine Syrup [ Nrd.508 ] , Drug Name :: Moxifloxacin And Difluoprednate Eye Drop [ Nrd.93 ] , Drug Name :: Moxifloxacin And Prednisolone Eye Drop [ Nrd.109 ] , Drug Name :: Moxifloxacin Tablet 400Mg [ Nrd.697 ] , Drug Name :: Moxifloxin 400Mg / 100Ml Injection [ Nrd.301 ] , Drug Name :: Multivitamin 10 Ml Injection [ Nrd.302 ] , Drug Name :: Nandrolone Decanoate 50 Mg Injection [ Nrd.305 ] , Drug Name :: Natamycin Opthalmic Suspension 5% Eye Drop [ Nrd.94 ] , Drug Name :: Nicoumalone Tablet 1Mg [ Nrd.705 ] , Drug Name :: Nicoumalone Tablet 4Mg [ Nrd.707 ] , Drug Name :: Azithromycin 10 Ml Vial Equaivelent To 500 Mg Injection [ Nrd.161 ] , Drug Name :: Nitrazepam Tablet 5Mg [ Nrd.714 ] , Drug Name :: Normal Saline 500 Ml Glass Bottle Injection [ Nrd.315 ] , Drug Name :: Olaptadine & Ketorolac Eye Drop [ Nrd.95 ] , Drug Name :: Ondansetron Oral Solution 30 Ml Drop [ Nrd.73 ] , Drug Name :: Ondansetron Oral Suspension Syrup [ Nrd.510 ] , Drug Name :: Paracetomol Tablet 650Mg [ Nrd.726 ] , Drug Name :: Phenobarbitone 20Mg / 5Ml In 100Ml Syrup [ Nrd.512 ] , Drug Name :: Pilocarpine 0.5% W / V Injection [ Nrd.334 ] , Drug Name :: Piracetam 200Mg Injection [ Nrd.336 ] , Drug Name :: Polymyxin B 10000Iu / Gm And Neomycin 3400Iu / Gm Eye Drop [ Nrd.96 ] , Drug Name :: Azithromycin Oral Suspension 100Mg / 5Ml Syrup [ Nrd.525 ] , Drug Name :: Prednisolone Acetate Opthalmic Suspension 10 Ml Eye Drop [ Nrd.74 ] , Drug Name :: Propylthiouracil Tablet 100Mg [ Nrd.753 ] , Drug Name :: Rabeprazole And Levosulpiride Capsule [ Nrd.6 ] , Drug Name :: Racecadotril Capsule 100Mg [ Nrd.5 ] , Drug Name :: Reteplase 18 Mg Injection [ Nrd.352 ] , Drug Name :: Rosuvastatin Tablet 10Mg And Fenofibrate Tablet 160Mg [ Nrd.771 ] , Drug Name :: Serratiopeptidase Tablet 10Mg [ Nrd.777 ] , Drug Name :: Silodosin Capsule 4Mg [ Nrd.35 ] , Drug Name :: Silodosin Capsule 8Mg [ Nrd.36 ] , Drug Name :: Sodium Chloride 5 % Eye Drop [ Nrd.115 ] , Drug Name :: Azithromycin Oral Suspension 200Mg / 5Ml Syrup [ Nrd.526 ] , Drug Name :: Terbutalin Drop [ Nrd.75 ] , Drug Name :: Tetanus Vaccine ( Adsorbed ) Injection Ip In 0.5 Ml [ Nrd.824 ] , Drug Name :: Tropicamide And Phenylepherine Eye Drop [ Nrd.118 ] , Drug Name :: Trypsin Chymotripsin Tablet [ Nrd.807 ] , Drug Name :: Vildagliptin Tablet 50Mg [ Nrd.812 ] , Drug Name :: Vitamin D ( 600000 Iu ) Injection [ Nrd.402 ] , Drug Name :: Vitamin D3 400Iu / Ml Drop [ Nrd.84 ] , Drug Name :: Vitamin D3 800Iu / Ml Drop [ Nrd.85 ] , Drug Name :: Voglibose Tablet 0.2Mg [ Nrd.813 ] , Drug Name :: Voglibose Tablet 0.3Mg [ Nrd.814 ] , Drug Name :: Carboxymethylcellulose And Glycerin Eye Drop [ Nrd.92 ] , Drug Name :: Zinc Oral Suspension 20 Mg / 100 Ml Syrup [ Nrd.524 ] , Drug Name :: Zinc Tablet 50Mg [ Nrd.818 ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Rajasthan View Result →
17.
Health and Family Welfare #8912979 Technical Bid
Supply Of Medicine And Surgical Items Supply Of Medicine And Surgical Items , Anaesthetics , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg , Bupivacaine Inj Ip 0.5% , Halothane Bp , Isoflurane Usp , Ketamine Inj Ip 50 Mg / Ml , Lignocaine Ointment 5 O / O , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg , Lignocaine Gel Ip 2% , Lignocaine Inj Ip 2 O / O , Propofol Inj Ip 10 Mg / Ml , Thiopentone Inj Ip 0.5 G , Sevoflurane , Atropine Sulphate Injection 0.6Mg / Ml , Liquid Medical Oxygen ( Lmo ) , Analgesic Antipyretices And Anti Inflammatory Drugs , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) , Fentanyl Citrate Injection Ip 2 Ml , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Tab Ip 200 Mg ( Coated ) , Ibuprofen Tab Ip 400 Mg ( Coated ) , Morphine Sulphate Inj Ip 10Mg / Ml , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) , Paracetamol Syrup Ip 125 Mg / 5Ml , Paracetamol Tab Ip 500 Mg , Paracetamol Inj. 150 Mg / Ml , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg / Ml , Indomethacin Cap Ip 25 Mg , Diclofence Prolonged Release Tablet Ip 100 Mg , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% , Etoricoxib Tab Ip 120Mg , Mefenamic Acid Tablets Bp 500 Mg , Fentanyl Citrate Injection 50Mcg / Ml , Naproxen Tablet Ip 500Mg , Naproxen Tablet Ip 250Mg , Etoricoxib Tablet Ip 90 Mg , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size , Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip 1% W / V 100Ml Size , Ketorolac Tromethamine Dispersible Tablet 10 Mg ( Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg ) , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) , Antiallergics And Drugs Used In Anaphylaxis , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use , Betamethasone Tab Ip 0.5Mg , Chlorpheniramine Maleate Tab Ip 4Mg , Dexamethasone Inj Ip 8Mg / 2Ml , Dexamethasone Tab Ip 0.5 Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) , Hydroxyzine Tab Ip 25 Mg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Pheniramine Inj Ip 22.75Mg / Ml , Prednisolone Tab Ip 5 Mg , Promethazine Syrup Ip 5 Mg / 5Ml , Promethazine Inj Ip 25Mg / Ml , Promethazine Tab Ip 25 Mg , Betamethasone Sod Phos Inj Ip 4Mg / Ml , Prednisolone Tablet Ip 10 Mg , Prednisolone Tab Ip 20 Mg , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetirizine Syrup Ip 5Mg / 5 Ml , Levoceitrizine Tablet 5Mg , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) , Antidotes And Other Substances Used In Poisoning , Naloxone Inj Ip 0.4Mg / Ml , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml , Anti Epileptic Drugs , Carbamazepine Tab Ip 200 Mg , Carbamazepine Tab Ip 100 Mg , Phenobarbitone Tab Ip 30 Mg , Phenytoin Injection Bp 50Mg / Ml , Phenytoin Oral Suspension Ip 25Mg / Ml , Phenytoin Tab Ip 100 Mg ( Film Coated ) , Sodium Valproate Inj 100 Mg / Ml , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Phenobarbitone Inj Ip 200Mg / Ml , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg , Clobazam Tablet / Capsule 5 Mg , Clobazam Tablet / Capsule 10 Mg , Levetiracetam Tablet Ip 500 Mg , Levetiracetam Oral Solution / Suspension 100Mg / Ml , Levetiracetam Injection 500Mg / 5Ml , Gabapentine Tablet / Capsule 100Mg , Gabapentine Tablet / Capsule 300Mg , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg ) , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) , Lacosamide Tablet 100 Mg ( Each Film Coated Tablet Contains Lacosamide 100 Mg ) , Topiramate Tablet Ip 25 Mg ( Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , Anti Infective Drugs , Acyclovir Oral Suspension Ip 400Mg / 5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Albendazole Oral Suspension Ip 400 Mg / 10Ml , Albendazole Tablets Ip 400 Mg , Amikacin Inj Ip 100 Mg , Amikacin Inj Ip 500 Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mg , Amphotericin B Inj Ip 50 Mg , Ampicillin Injection Ip 500 Mg , Azithromycin Tab 100 Mg Dispersible Tabs ( 3 Tab Strip 10X3x3 ) , Azithromycin Tablets Ip 250Mg , Azithromycin Tab Ip 500 Mg , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) , Cefotaxime Injection Ip 1 G , Cefotaxime Inj Ip 250 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G / Vial , Ceftriaxone Inj Ip 250 Mg / Vial , Ceftriaxone Inj Ip 500Mg / Vial , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Chloroquine Phosphate Inj Ip 40 Mg / Ml , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml , Ciprofloxacin Injection Ip 200Mg / 100Ml , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Clotrimazole Cream Ip 2% W / W , Clotrimazole Vaginal Tab Ip 500Mg , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Diethylcarbamazine Tab Ip 100 Mg , Doxycycline Cap Ip 100 Mg , Fluconazole Tablets Ip 150Mg , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) , Griseofulvin Tab Ip 125 Mg , Itraconazole Cap 100 Mg , Meropenem Inj Ip 500 Mg , Metronidazole Inj Ip 500 Mg / 100Ml , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml , Metronidazole Tablets Ip 200 Mg ( Film Coated ) , Metronidazole Tablets Ip 400 Mg ( Film Coated ) , Norfloxacin Tab Ip 400Mg Film Coated , Ofloxacin Tab Ip 200 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Quinine Dihydrochloride Inj Ip 300 Mg / Ml , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) , Ampicillin Cap Ip 500Mg , Nitrofurantoin Tab Ip 100Mg , Cloxacillin Sodium Inj Ip 500Mg , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml , Ofloxacin Oral Suspension Ip 50Mg / 5Ml , Tinidazole Tab Ip 300 Mg ( Film Coated ) , Tinidazole Tab Ip 500 Mg ( Film Coated ) , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml , Cefpodoxime Dispersible Tab 50 Mg , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) , Meropenem Inj. Ip 1Gm , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Amikacin Inj Ip 250 Mg , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) , Aztreonam Injection Usp 500 Mg , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) , Cefuroxime Axetil Tab Ip 250 Mg , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Levofloxacin Tablets Ip 250 Mg , Linezolid Tablets Ip 600 Mg , Linezolid Inj 200Mg / 100Ml , Mefloquine Tablets Ip 250 Mg , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) , Vancomycin For Intravenous Infusion Ip 500 Mg , Vancomycin For Intravenous Infusion Ip 1 Gm , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) , Co-Trimoxazole Tablet Ip ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) , Aztreonam Injection 1Gm , Framycetin Sulphate Cream 1 O / O 30Gm Pack , Framycetin Sulphate Cream 1 O / O 100 Gm Pack , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Piperacillin Injection 2 Gm + Tazobactom 250Mg Ip , Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection , Cefadroxil Dispersible Tablet 250 Mg ( Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg ) , Cefadroxil Tablet 500 Mg , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size , Levofloxacin Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) , Faropenem Tablet Sodium 200 Mg ( Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg ) , Clindamycin Phosphate Injection Ip 300 Mg , Imipenem + Cilastatin Injection 500Mg / 500Mg Ip Powder For Solution , Polymixin Sulphate B Injection Usp 5 Lac I.U. , Meropenem Injection Ip 250 Mg , Colistimethate Injection Ip 1M Iu Powder For Solution , Voriconazole Injection 200Mg / Vial , Terbinafine Hydrochloride Tablet 250 Mg , Valganciclovir Tablet 450 Mg , Entecavir Tablet Ip 0.5 Mg ( Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg ) , Ganciclovir Sodium Injection 500Mg ( Lyophilized Powder For Reconstitution ) , Anti Neoplastic And Immuno Suppressant Drugs Palliative Care , Azathioprine Tab Ip 50 Mg , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) , Chlorambucil Tab Ip 5 Mg , Cisplatin Inj Ip 50 Mg / 50 Ml , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cytarabine Injection Bp 500Mg , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Doxorubicin Inj Ip 50 Mg / 25 Ml , Etoposide Inj Ip 100 Mg , Fluorouracil Inj Ip 250 Mg / 5Ml , L-Asparaginase Inj 10000 Iu , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Methotrexate Inj Ip 50 Mg / 2 Ml , Methotrexate Tab Ip 2.5 Mg , Paclitaxel Inj Ip 260 Mg , Paclitaxel Inj Ip 100 Mg , Tamoxifen Tab Ip 10 Mg , Vinblastine Inj Ip 10Mg / 10Ml , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Carboplatin Injection Ip 150 Mg , Carboplatin Injection Ip 450 Mg , Cisplatin Inj Ip 10 Mg / 10 Ml , Dacarbazine Injection 500 Mg Usp / Bp , Filgrastim Injection Ip ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcg , Gemcitabine For Injection 200 Mg , Gemcitabine For Injection Ip 1Gm , Ifosfamide Injection Ip / Bp / Usp 1Gm , Imatinib Tab Ip 400Mg , Methotrexate Tablets Ip 10 Mg , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg , Oxaliplatin Injection Usp 50 Mg , Cyclosporin Capsule Usp / Ip 50 Mg , Procarbazine Hydrochloride Capsule Usp 50 Mg ( Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg ) , Bendamustine Injection 100 Mg , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) , Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg ) , Bortezomib Injection 2Mg , Abiraterone Acetate Tablet Ip 250 Mg ( Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg ) , Lomustine Capsule Ip 40 Mg ( Each Capsule Contains Lomustine Ip 40 Mg ) , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) , Bevacizumab Injection 400 Mg , Bevacizumab Injection 100 Mg , Cyclophosphamide Tablet Ip 50 Mg ( Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg ) , Gefitinib Tablet Ip 250 Mg ( Each Film Coated Tablet Contains Gefitinib Ip 250 Mg ) , Mycophenolate Mofetil Capsule / Tablets Ip 250 Mg ( Each Capsule / Tablets Conatin Mycophenolate Mofetil Ip 250 Mg ) , Tacrolimus Capsule Ip 0.5 Mg ( Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg ) , Mycophenolate Sodium Tablet 360 Mg ( Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg ) , Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) , Zoledronic Acid Injection Ip 4Mg Vial , Dasatinib Tab 100 Mg , Anti Parkinsonism Drugs , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Trihexyphenidyl Hcl Tab Ip 2 Mg , Bromocriptine Tablets Ip 2.5 Mg , Drugs Affecting The Blood , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) , Enoxaparin Sodium Inj Ip 60 Mg , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) , Human Albumin Solution Ip 20% , Rh-Erythropoetin Inj Ip 10000 Iu , Rh-Erythropoetin Inj Ip 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Factor Ix Concentrate ( Purified ) Ip 500-600 I.U. ( Human Coagulation Factor Ix ) , Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial ) , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion , Tranexamic Acid Tablets Ip 500 Mg , Warfarin Sodium. Tab Ip 5Mg , Vitamin K-1 ( Phytomenadione ) Ip 1Mg / 0.5Ml Injection ( Detail In Rc ) , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial , Recombinant Coagulation Factor Viia 1Mg , Recombinant Coagulation Factor Viia 2Mg , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size , Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) , Feracrylum 1% W / V Sterile Solution 100 Ml , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size , Recombinant F Ix 500 Iu With Diluent , 3Rd Generation Recombinant F Viii 250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , Cardio Vascular Drugs , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amiodarone Hydrochloride Inj 50 Mg / Ml , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Clopidogrel Tab Ip 75 Mg , Digoxin Inj Ip 0.25 Mg / Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dobutamine Inj Ip 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Ip 250 Mg / 5Ml ( Amp ) , Dopamine Hydrochloride Inj Ip 40 Mg / Ml , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tab Ip 2.5Mg , Isosorbide Dinitrate Tab Ip 5 Mg , Isosorbide Mononitrate Tabs Ip 20 Mg , Lisinopril Tab Ip 5 Mg , Losartan Tab Ip 50 Mg , Magnesium Sulphate Inj. Ip 500Mg / Ml ( 50%W / V ) , Methyldopa Tab Ip 250Mg Film Coated , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) , Nitroglycerin Inj 5 Mg / Ml , Propranolol Tab Ip 40 Mg , Streptokinase Injection 15 Lac Units Ip , Verapamil Tab Ip 40 Mg Film Coated , Labetalol Tab Ip 100Mg , Labetalol Hcl Inj Ip 20Mg / 4Ml , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) , Atenolol Tab Ip 25 Mg , Enalapril Maleate Tablets Ip 10 Mg , Lisinopril Tablets Ip 10 Mg , Lisinopril Tab Ip 2.5 Mg , Losartan Tab Ip 25 Mg , Adenosine Injection Ip 6 Mg / 2Ml , Atorvastatin Tablets Ip 40 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Fenofibrate Capsules / Tab Ip 200 Mg , Isoprenaline Injection Ip 2Mg / Ml , Metoprolol Tablets Ip 25 Mg , Metoprolol Succinate Extended Release Tablets Ip 50 Mg , Noradrenaline Injection Ip 2 Mg / Ml , Prazosin Tablets ( Extended Release ) 2.5 Mg , Telmisartan Tablets Ip 40 Mg , Urokinase Injection 5 Lac Unit ( Lyophilized ) , Ramipril Tablets Ip 2.5 Mg , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Clonidine Hydrochloride Tablet Ip 0.1 Mg ( Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg ) , Sotalol Hydrochloride Tablet Usp / Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40Mg ) , Esmolol Hydrochloride Injection 10Mg / Ml 10Ml Size , Sodium Nitroprusside Injection 25Mg / Ml 2Ml Size , Carvedilol Tablet 3.125 Mg , Rosuvastatin Tablet Ip 20 Mg ( Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg ) , Rosuvastatin Tablet 10 Mg , Sacubitril 24 Mg And Valsartan 26 Mg Tablet , Dental Drugs , Chlorhexidine Mouthwash Ip 0.2 O / O , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel , Dermatological Drugs , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O , Acyclovir Cream 5% , Cetrimide Cream Ip 15 Gm , Fusidic Acid Cream Ip 2% , Glycerin Ip 400 Gm , Liquid Paraffin Ip 400 Ml , Miconazole Nitrate Cream Ip 2% , Povidone Iodine Ointment 5% 15 Gm , Neomycin Bacitracin And Sulphacetamide Powder ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Gentian Violet Topical Solution Usp 1O / O , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) , Betamethasone Dipropionate Cream Ip 0.05% , Betamethasone Lotion Ip 0.05 O / O , Clindamycin Phosphate Gel Usp 1 O / O , Clobetasol Propionate Cream Ip 0.05 O / O , Glycerin Ip 100 Ml , Ketoconazole Cream 2% , Permethrin Lotion 5% , Permethrin Cream 5% , Tretenoin Cream Usp 0.025% , Coal Tar 6% & Salicylic Acid 3% Ointment , Calamine Lotion Ip 100Ml , Powder Clotrimazole 1% W / W 30 Gm , Terbinafine Cream 1%W / W ( 10 Gm Tube ) , Olopatadine Hydrochloride Ophthalmic Solution 0.1% W / V Ip ( E / D ) 5Ml Size , Oitment Mupirocin Ip 2% , Reagents And Diagnostic Agents , Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) , Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) , Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) , Gadodiamide Inj. 0.5Mml / Ml Vial , Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. , Multistix Test Strip , Disinfectants And Antiseptics , Povidone Iodine Solution Ip 5 % 500 Ml , Compound Benzoin Tincture Ip , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) , Gluteraldehyde Solution 2% , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) , Surgical Spirit Ip ( 500 Ml ) , Chlorhexidine Gluconate Solution 5% 250 Ml , Surgical Spirit Ip ( 100 Ml ) , Povidone Iodine Solution Ip 5% 100Ml Bottle , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Solution Ip 10 % , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , Diuretics , Acetazolamide Tab Ip 250Mg , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) , Hydrochlorthiazide Tab Ip 12.5 Mg , Mannitol Inj Ip 20% W / V , Spironolactone Tab Ip 25Mg , Torsemide Tab 10 Ip Mg , Hydrochlorthiazide Tab Ip 25Mg , Torsemide Inj 10 Mg / Ml , Spironolactone Tablets Ip 50 Mg , Drugs For Ear Ailments , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O , Gastro Intestinal Drugs , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Bisacodyl Tab Ip 5 Mg , Dicyclomine Tab Ip 10 Mg , Dicyclomine Inj Ip 10 Mg / Ml , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml , Domperidone Suspension Ip 5Mg / 5Ml , Domperidone Tab Ip 10 Mg , Hyoscine Butylbromide Inj Ip 20 Mg / Ml , Loperamide Tab Ip 2 Mg , Metoclopramide Inj Ip 10Mg / 2Ml , Metoclopramide Tab Ip 10 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg / Ml , Ors Powder Ip , Pentoprazole Inj 40 Mg , Ranitidine Hcl Injection Ip 50Mg / 2Ml , Ranitidine Tab Ip 150Mg Film Coated , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O , Hyoscine Butyl Bromide Tablets Ip 10Mg , Drotaverine Tab Ip 40 Mg , Ranitidine Tab Ip 300Mg Film Coated , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml , Liquid Paraffin Ip 100 Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Ursodeoxycholic Acid Tablets Ip 300 Mg , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) , Gout And Rheumatiod Arthritis , Allopurinol Tablets Ip 100 Mg , Hydroxychloroquine Sulphate Tablets 200Mg , Leflunomide Tablets Ip 10Mg ( Film Coated ) , Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) , Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip , Hormones Other Endocrine Drugs And Contraceptives , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) , Carbimazole Tabs Ip 5 Mg ( Film Coated ) , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg / Ml , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Conjugated Estrogen Tabs Usp 0.625 Mg. , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe , Ethinyloestradiol Tabs Ip 50 Mcg , Glibenclamide Tab Ip 5 Mg , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 2 Mg , Glimepiride Tab Ip 1Mg , Glipizide Tab Ip 5Mg , Hydroxyprogesterone Inj Ip 250Mg / Ml , Isophane Insulin Inj Ip 40 Iu / Ml , Metformin Tab Ip 500 Mg ( Film Coated ) , Norethisterone Tab Ip 5 Mg , Pioglitazone Tab Ip 15 Mg , Progesterone Inj 200 Mg / 2Ml , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) , Thyroxine Sodium Tablets Ip 100Mcg , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets Ip ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) , Glucagon For Injection Usp 1 Mg / Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Thyroxine Tablets Ip 50 Mcg , Octreotide Injection 50 Mcg / Ml , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges , Tenaligliptin Tablet Ip 20Mg , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle , Immunologicals , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) , Human Anti D Immunoglobulin 150 Mcg , Human Rabies Immunoglobulin Inj 150 Iu / Ml , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum- , Tetanus Immunoglobulin Ip 250 Iu / Vial , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) , Diphtheria Antitoxin 10000 Iu , Hepatitis B Immunologlobin Injection Ip 200 I.U , Human Immunoglobulin Inj With 12%Igm, 12%Iga, 76%Igg In Pack Of 10Ml ( 0.5Gm ) , Muscle Relaxants And Cholinestrase Inhibitors , Atracurium Inj 10 Mg / Ml , Glycopyrrolate Inj Ip 0.2 Mg / Ml , Midazolam Inj Ip 1 Mg / Ml , Neostigmine Inj Ip 0.5 Mg / Ml , Neostigmine Tab Ip 15 Mg , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) , Valethamate Bromide Inj 8Mg / Ml , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) , Neostigmine Injection Ip 2.5Mg / 5Ml , Cis Atracurium Besylate Injection 2 Mg / Ml In 5 Ml Vial , Opthamological Preparations , Tropicamide Eye Drop Ip 1O / O , Atropine Eye Ointment Ip 1% , Atropine Sulphate Ophthalmic Solution Usp 1% , Chloramphenicol Eye Drops Ip 0.5 0 / 0 , Ciprofloxacin Eye Drops Ip 0.3 O / O W / V , Ciprofloxacin Ophthalmic Ointment Usp 0.3% , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O , Tobramycin Eye Drops 0.3% [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Lidocaine Hcl Topical Solution Usp 4% , Fluconazole Eye Drops 0.3% , Timolol Eye Drops Ip 0.5 O / O W / V , Homatropine Eye Drops Ip 2% , Travoprost Eye Drops Ip 0.004 O / O , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Betaxolol Eye Drops 0.5 O / O , Carboxymethylcellulose Eye Drops Ip 0.5% , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size , Oxytocics And Antioxytocics , Isoxsuprine Inj Ip 5 Mg / Ml , Isoxsuprine Tab Ip 20 Mg , Methylergometrine Inj Ip 0.2 Mg / Ml , Methylergometrine Tab Ip 0.125 Mg , Misoprostol Tab Ip 200 Mcg , Oxytocin Inj Ip 5 Iu / Ml , Mifepristone Tab Ip 200Mg , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) / Natural Micronised Progesteron Tablet 200 Mg ( Each Tablet Contains Progesteron Ip 200 Mg ) , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) , Human Chorionic Gonadotropin Injection Ip 5000 I.U. , Leurprolide Acetate Depot 3.75 Mg , Leurprolide Acetate Depot 11.25 Mg , Psychotropic Drugs , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amitriptyline Tab Ip 25Mg Film Coated , Chlordiazepoxide Tablets Ip 10Mg , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) , Chlorpromazine Inj. Ip 25Mg / Ml , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) , Diazepam Tab Ip 5 Mg , Escitalopram Tab Ip 10 Mg , Fluoxetine Cap Ip 20 Mg , Haloperidol Inj Ip 5 Mg / Ml , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Imipramine Tab Ip 25 Mg ( Coated Tab ) , Imipramine Tab Ip 75 Mg ( Coated ) , Lithium Carbonate Tab Ip 300 Mg , Lorazepam Inj Ip 2 Mg / Ml , Olanzapine Tab Ip 5 Mg , Risperidone Tab 2Mg , Risperidone Tab 1 Mg , Sertraline Tab Ip 50 Mg , Trifluperazine Tab Ip 5 Mg Coated , Quetiapine Tablet Ip 50Mg , Quetiapine Tablet Ip 25Mg , Clonazepam Tablet 0.5 Mg , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Zolpidem Tablet 5 Mg , Drugs Acting On The Respiratory Tract , Aminophylline Inj Ip 25 Mg / Ml , Beclomethasone Inhalation Ip 200 Mcg / Dose , Budesonide Nebulizer Suspension 0.25Mg / Ml , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S. , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml , Salbutamol Tablet Ip 4 Mg , Salbutamol Inhalation 100 Mcg / Dose , Salbutamol Nebuliser Solution Bp 5 Mg / Ml , Salbutamol Tab Ip 2 Mg , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) , Salbutamol Syrup Ip 2Mg / 5Ml , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Budesonide Powder For Inhalation 200 Mcg , Ipratropium Powder For Inhalation Ip 40 Mcg , Terbutaline Tablets Ip 2.5 Mg , Xylometazoline Nasal Drops Ip 0.1% , Cough Syrup / Expectorant ( 50 ) Ml , Acebrophylline Tablet / Capsule 100 Mg , Solution Correcting Water Electrolyte And Acid Base Disturbance , Compound Sodium Lactate Inj. Ip , Dextrose Inj Ip 25% W / V , Dextrose Inj Ip 10% , Dextrose Inj Ip 5% , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection ) , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Potassium Chloride Inj. 0.15 Gm / Ml , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W / V Polypack 500 Ml , Drugs For Urology , Finasteride Tablets Ip 5 Mg , Tamsulosin Hcl Tablets / Capsule 0.4 Mg , Flavoxate Tablets Ip 200 Mg ( Coated Tablet ) , Savelamer Carbonate Tablet 400 Mg ( Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg ) , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) , Levamisol Hydrochloride Tablet Ip 50 Mg ( Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg ) , Phenazopyridine Tablet 5 Mg , Dutasteride Tablet 0.5 Mg , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) , Antivertigo , Betahistine Tab Ip 8 Mg , Betahistine Tab Ip 16 Mg , Cinnarizine Tablets Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , Vitamins And Minerals , Ascorbic Acid Tab Ip 500 Mg , Calcium Gluconate Inj Ip 10% ( Iv Use ) , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Folic Acid Tab Ip 5 Mg , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) , Cholecalciferol Granules 60, 000 Iu / Gm , Mecobalamin Inj 500 Mcg / Ml , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Thiamine Tablets Ip 100 Mg , Calcitriol Capsules Ip 0.25 Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Cobalmine Tablet 1500Mcg , Vitamin D3 Oral Solution 60000 Iu , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size , Multi Vitamin Syrup , Miscellaneous Drugs , Flunarizine Tab 5 Mg , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Peritonial Dialysis Solution Ip , Sodium Bicarbonate Inj Ip 7.5% W / V , Water For Inj Ip , Alendronate Sodium Tablets Usp / Bp 35 Mg , Mannitol With Glycerin Injection 10 O / O + 10 O / O W / V ( For Intravenous Infusion ) , Normal Human Intravenous Immunoglobulin 5G / 100Ml , Pregabalin Cap Ip 75 Mg , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Intravenous Fat Emulsion 20% W / V 250Ml , Pyridostigmine Tablet Ip 60 Mg ( Each Tablet Contains Pyridostigmine Ip 60 Mg ) , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size , Amino Acid 10% Injection 100Ml Size , Vitamin E Capsule 400 Mg , Inj Poractant Alpha 80 Mg / Ml In Pack Of 1.5 Ml ( Detail In Rc ) , Absorbable Sutures , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 , Absorbable Surgical Suture ( Sterile Catgut ) , Needled Suture Chromic Size-3 / 0 ( 3 / 8 Cir Rcutting Needle 26Mm, Length 76 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 - , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 - , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 - , Non Absorbable Surgical Suture Sterilised Surgical Needled Suture , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 4 / 0 ( 3 / 8 Conventional Cutting Needle 19Mm Length 60 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 5 / 0 ( 3 / 8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb 13 Mm Needle, Length 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue ( 3 / 8Cir Rb 16 Mm Needle, Length 90 Cm ) Size 6 / 0 , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 7 / 0 ( 3 / 8Cir Rb Double 8Mm Needle, Length 60 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb Double Needle 17Mm Length 90 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Tapercut Double Needle 17Mm Length 70 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Tapercut Needle 17Mm Length 75 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Tapercut Needle, 25 Mm Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Rb Needle 16 Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 8 / 0 ( 3 / 8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Circle Tapercut 13Mm Double Needle 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Circle Cc 13Mm Needle, Suture Length Of 70Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Suture Length Of 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 4 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 75 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2 / 0 1 / 2 Circle Taper Cut, 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2-0 1 / 2 Circle Taper Cut, 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green / White Or Blue / White Coated Polyster Braided ( Green / Blue ) With Size 3 / 0 1 / 2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 10 / 0 ( 3 / 8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 - , B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 - , Polyglecraprone 25 Monofilament Sutures , Absorbable Surgical Sutures, Sterilised Needled Polyglecaprone / Polyglyconate, Monofilament Sutures Size 2 / 0 ( 1 / 2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate, Size 3 / 0 ( 1 / 2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 4 / 0 ( 1 / 2 Circle Cutting 16Mm Needle, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) , Monofilament Polydioxanone Suture , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 ( 1 / 2 Circle Reverse Cutting 50 Mm Length 90Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2 / 0 ( 1 / 2 Circle Rb 31Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) , Antibacterial Coated Suture , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm , Surgicals , Absorbable Gelatin Sponge 80 X 50X 10Mm- , Absorbent Cotton Wool Ip 500 Gm , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set Blood Transfusion Set - , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) - , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) - , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) - , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) - , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) - , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) - , Suction Catheter, Sterile.Size: Fg 5 - , Suction Catheter, Sterile. Size: F G-6 - , Suction Catheter, Sterile. Size: F G-8 - , Suction Catheter, Sterile. Size: F G-10 - , Suction Catheter, Sterile. Size: F G-12 - , Suction Catheter, Sterile. Size: F G-14 - , Suction Catheter, Sterile. Size: F G-16 - , Suction Catheter, Sterile. Size: F G-18 - , Suction Catheter, Sterile. Size: F G-20 - , Suction Catheter, Sterile. Size: F G-22 - , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material- , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material- , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material- , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material- , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material- , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material- , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material- , Infant Feeding Tube Size 10Fg- , Infant Feeding Tube Size 8Fg- , Infant Feeding Tube Size 5Fg- , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable- , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable- , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable- , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G - , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G - , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G - , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G - , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G - , Mucus Extractor Sterile- , Nasal Oxygen Set, Twin Bore All Sizes Adult - , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics - , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll , Plaster Of Paris Bandage 10Cm X 2.7Mts , Ryles Tube / Nasogastric Tube Size: 10- , Ryles Tube / Nasogastric Tube Size: 12- , Ryles Tube / Nasogastric Tube Size:14 - , Ryles Tube / Nasogastric Tube Size: 16 - , Ryles Tube / Nasogastric Tube Size: 18 - , Scalp Vein Set ( Disposable ) Size 18G - , Scalp Vein Set ( Disposable ) Size 20G - , Scalp Vein Set ( Disposable ) Size 22G - , Scalp Vein Set ( Disposable ) Size 24 G - , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable- , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable- , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable- , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable- , Surgical Blade Sterile, Size 11- , Surgical Blade Sterile, Size 15- , Surgical Blade Sterile, Size 22- , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15- , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5- , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20- , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10- , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10- , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15- , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20- , Suture Needles Curved And Cutting Size 1-5- , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch - , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch - , Urine Collecting Bag, Disposable 2000 Ml- , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Plain - Size 2.5 - , Endotracheal Tube, Plain - Size 3 - , Endotracheal Tube, Plain - Size 3.5 - , Endotracheal Tube, Plain - Size 4 - , Endotracheal Tube, Plain - Size 4.5 - , Endotracheal Tube, Plain - Size 5 - , Endotracheal Tube, Plain - Size 5.5 - , Endotracheal Tube, Plain - Size 6 - , Endotracheal Tube, Plain -Size 6.5 - , Endotracheal Tube, Plain - Size 7 - , Endotracheal Tube, Plain - Size 7.5 - , Endotracheal Tube, Plain - Size 8 - , Endotracheal Tube, Plain - Size 8.5 - , Endotracheal Tube, Cuffed - Size 4 - , Endotracheal Tube, Cuff - Size 4.5 - , Endotracheal Tube, Cuff - Size 5 , Endotracheal Tube, Cuff - Size 6 - , Endotracheal Tube, Cuff- Size 6.5 - , Endotracheal Tube, Cuff - Size 7 - , Endotracheal Tube, Cuff - Size 7.5 - , Endotracheal Tube, Cuff - Size 8 - , Endotracheal Tube, Cuff - Size 8.5 - , Endotracheal Tube, Cuff - Size 9 - , Tracheostomy Tube, Plain - All Sizes- , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes- , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 - , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 - , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 - , Corrugated Drainage Sheet - All Sizes- , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm- , Bone Wax Sterilised , Temporary Cardiac Pacing Wire ( Electrode ) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Skin Graft Knife Blade ( Sterile ) - , K Wire, Length 375 Mm; 1Mm- , K Wire, Length 375 Mm; 1.6Mm- , K Wire, Length 375 Mm; 1.8Mm- , Face Mask, Disposable- , Surgical Cap Disposable ( For Surgeons ) - , Surgical Cap, Disposable ( For Nurses ) -- , Foldable Intra Ocular Lense With Injector - 11 To 17.5 , Foldable Intra Ocular Lense With Injector - 18 To 24 , Foldable Intra Ocular Lense With Injector - 24.5 To 28.5 , Standard Pama Intra Ocular Lenses - 11 To 17.5 , Standard Pama Intra Ocular Lenses - 18 To 24 , Standard Pama Intra Ocular Lenses - 24.5 To 28.5 , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free , Rubber Examination Gloves, Non-Sterile, Extra Small- , Rubber Examination Gloves, Size Small - , Rubber Examination Gloves, Size Medium - , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large - , Pressure Monitoring Line / High Pressure Extension Line - , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml - , Umbilical Catheter For New Born, All Sizes -- , Umbilical Cord Clamp - , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property- , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 - , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 - , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- - , Bone Cement , Sanitary Napkin Beltless- , Sanitary Pads Belt Type- , Sanitary Napkin Beltless With Wings - , Oxygen Mask ( Adult ) , Oxygen Mask ( Pediatric ) , Foleys Catheter No. 14 , Nelaton Catheter Size 14 Fg , Ecg Electrode , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml , Urethral Catheter 90 ( Fg-14 ) Made Up Of Medical Grade Pvc , Urethral Catheter 91 ( Fg-10 ) , Made Up Of Medical Grade Pvc , Vaccum Suction Set, 2.5 Meter Length , Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm ( Longline Iv ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm ( Longline Iv ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm ( Longline Iv ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm ( Longline Iv ) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm ( Longline Iv ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm ( Longline Iv ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm ( Longline Iv ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm ( Longline Iv ) , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 10Cm ( Non Pyrogenic & Single Use ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 50Cm ( Non Pyrogenic & Single Use ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 100Cm ( Non Pyrogenic & Single Use ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 150Cm ( Non Pyrogenic & Single Use ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property , Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Ventilator Without Vent , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Ventilator Without Vent , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Bipap With Vent , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support , Nebulization Mask Adult , Nebulization Mask Paediatric , Chemotherapy Port And Non-Coring Needles ( Adult ) , Chemotherapy Port & Non-Coring Needles ( Pediatric ) , Swine Flu Drugs , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Anti-Malerial Drugs , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg , Covid19 , Liposomol Amphotericine Injection B 50Mg , Non Edl Items , Proparacaine Eye Drops , Tryphan Blue Dye , Keratome 2.8 Mm , Crescent , Side Pot 15 Degree , Pilocarpine Injection
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
18.
Health and Family Welfare #8903405 Technical Bid
Drug Rate Contract Drug Rate Contract , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg , Bupivacaine Inj Ip 0.5% , Halothane Bp , Isoflurane Usp , Ketamine Inj Ip 50 Mg / Ml , Lignocaine Ointment 5 O / O , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg , Lignocaine Gel Ip 2% , Lignocaine Inj Ip 2 O / O , Propofol Inj Ip 10 Mg / Ml , Thiopentone Inj Ip 0.5 G , Sevoflurane , Atropine Sulphate Injection 0.6Mg / Ml , Liquid Medical Oxygen ( Lmo ) , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) , Fentanyl Citrate Injection Ip 2 Ml , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Tab Ip 200 Mg ( Coated ) , Ibuprofen Tab Ip 400 Mg ( Coated ) , Morphine Sulphate Inj Ip 10Mg / Ml , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) , Paracetamol Syrup Ip 125 Mg / 5Ml ( Detail In Rc ) , Paracetamol Tab Ip 500 Mg , Paracetamol Inj. 150 Mg / Ml , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg / Ml , Indomethacin Cap Ip 25 Mg , Diclofence Prolonged Release Tablet Ip 100 Mg , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% , Etoricoxib Tab Ip 120Mg , Mefenamic Acid Tablets Bp 500 Mg , Fentanyl Citrate Injection 50Mcg / Ml , Naproxen Tablet Ip 500Mg , Naproxen Tablet Ip 250Mg , Etoricoxib Tablet Ip 90 Mg , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size , Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip 1% W / V 100Ml Size , Ketorolac Tromethamine Dispersible Tablet 10 Mg ( Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg ) , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use , Betamethasone Tab Ip 0.5Mg , Chlorpheniramine Maleate Tab Ip 4Mg , Dexamethasone Inj Ip 8Mg / 2Ml , Dexamethasone Tab Ip 0.5 Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) , Hydroxyzine Tab Ip 25 Mg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Pheniramine Inj Ip 22.75Mg / Ml , Prednisolone Tab Ip 5 Mg , Promethazine Syrup Ip 5 Mg / 5Ml , Promethazine Inj Ip 25Mg / Ml , Promethazine Tab Ip 25 Mg , Betamethasone Sod Phos Inj Ip 4Mg / Ml , Prednisolone Tablet Ip 10 Mg , Prednisolone Tab Ip 20 Mg , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetirizine Syrup Ip 5Mg / 5 Ml , Levoceitrizine Tablet 5Mg , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) , Naloxone Inj Ip 0.4Mg / Ml , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml , Carbamazepine Tab Ip 200 Mg , Carbamazepine Tab Ip 100 Mg , Phenobarbitone Tab Ip 30 Mg , Phenytoin Injection Bp 50Mg / Ml , Phenytoin Oral Suspension Ip 25Mg / Ml , Phenytoin Tab Ip 100 Mg ( Film Coated ) , Sodium Valproate Inj 100 Mg / Ml , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Phenobarbitone Inj Ip 200Mg / Ml , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg , Clobazam Tablet / Capsule 5 Mg , Clobazam Tablet / Capsule 10 Mg , Levetiracetam Tablet Ip 500 Mg , Levetiracetam Oral Solution / Suspension 100Mg / Ml , Levetiracetam Injection 500Mg / 5Ml , Gabapentine Tablet / Capsule 100Mg , Gabapentine Tablet / Capsule 300Mg , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg ) , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) , Lacosamide Tablet 100 Mg ( Each Film Coated Tablet Contains Lacosamide 100 Mg ) , Topiramate Tablet Ip 25 Mg ( Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , Acyclovir Oral Suspension Ip 400Mg / 5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Albendazole Oral Suspension Ip 400 Mg / 10Ml , Albendazole Tablets Ip 400 Mg ( Detail In Rc ) , Amikacin Inj Ip 100 Mg , Amikacin Inj Ip 500 Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mg , Amphotericin B Inj Ip 50 Mg , Ampicillin Injection Ip 500 Mg , Azithromycin Tab 100 Mg Dispersible Tabs ( 3 Tab Strip 10X3x3 ) , Azithromycin Tablets Ip 250Mg , Azithromycin Tab Ip 500 Mg , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) , Cefotaxime Injection Ip 1 G , Cefotaxime Inj Ip 250 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G / Vial , Ceftriaxone Inj Ip 250 Mg / Vial , Ceftriaxone Inj Ip 500Mg / Vial , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Chloroquine Phosphate Inj Ip 40 Mg / Ml , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml , Ciprofloxacin Injection Ip 200Mg / 100Ml , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Clotrimazole Cream Ip 2% W / W , Clotrimazole Vaginal Tab Ip 500Mg , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Diethylcarbamazine Tab Ip 100 Mg , Doxycycline Cap Ip 100 Mg , Fluconazole Tablets Ip 150Mg , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) , Griseofulvin Tab Ip 125 Mg , Itraconazole Cap 100 Mg , Meropenem Inj Ip 500 Mg , Metronidazole Inj Ip 500 Mg / 100Ml , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml , Metronidazole Tablets Ip 200 Mg ( Film Coated ) , Metronidazole Tablets Ip 400 Mg ( Film Coated ) , Norfloxacin Tab Ip 400Mg Film Coated , Ofloxacin Tab Ip 200 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Quinine Dihydrochloride Inj Ip 300 Mg / Ml , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) , Ampicillin Cap Ip 500Mg , Nitrofurantoin Tab Ip 100Mg , Cloxacillin Sodium Inj Ip 500Mg , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml , Ofloxacin Oral Suspension Ip 50Mg / 5Ml , Tinidazole Tab Ip 300 Mg ( Film Coated ) , Tinidazole Tab Ip 500 Mg ( Film Coated ) , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml , Cefpodoxime Dispersible Tab 50 Mg , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) , Meropenem Inj. Ip 1Gm , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Amikacin Inj Ip 250 Mg , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) , Aztreonam Injection Usp 500 Mg , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) , Cefuroxime Axetil Tab Ip 250 Mg , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Levofloxacin Tablets Ip 250 Mg , Linezolid Tablets Ip 600 Mg , Linezolid Inj 200Mg / 100Ml , Mefloquine Tablets Ip 250 Mg , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) , Vancomycin For Intravenous Infusion Ip 500 Mg , Vancomycin For Intravenous Infusion Ip 1 Gm , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) , Co-Trimoxazole Tablet Ip ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) , Aztreonam Injection 1Gm , Framycetin Sulphate Cream 1 O / O 30Gm Pack , Framycetin Sulphate Cream 1 O / O 100 Gm Pack , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Piperacillin Injection 2 Gm + Tazobactom 250Mg Ip , Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection , Cefadroxil Dispersible Tablet 250 Mg ( Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg ) , Cefadroxil Tablet 500 Mg , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size , Levofloxacin Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) , Faropenem Tablet Sodium 200 Mg ( Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg ) , Clindamycin Phosphate Injection Ip 300 Mg , Imipenem + Cilastatin Injection 500Mg / 500Mg Ip Powder For Solution , Polymixin Sulphate B Injection Usp 5 Lac I.U. , Meropenem Injection Ip 250 Mg , Colistimethate Injection Ip 1M Iu Powder For Solution , Voriconazole Injection 200Mg / Vial , Terbinafine Hydrochloride Tablet 250 Mg , Valganciclovir Tablet 450 Mg , Entecavir Tablet Ip 0.5 Mg ( Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg ) , Ganciclovir Sodium Injection 500Mg ( Lyophilized Powder For Reconstitution ) , Azathioprine Tab Ip 50 Mg , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) , Chlorambucil Tab Ip 5 Mg , Cisplatin Inj Ip 50 Mg / 50 Ml , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cytarabine Injection Bp 500Mg , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Doxorubicin Inj Ip 50 Mg / 25 Ml , Etoposide Inj Ip 100 Mg , Fluorouracil Inj Ip 250 Mg / 5Ml , L-Asparaginase Inj 10000 Iu , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Methotrexate Inj Ip 50 Mg / 2 Ml , Methotrexate Tab Ip 2.5 Mg , Paclitaxel Inj Ip 260 Mg , Paclitaxel Inj Ip 100 Mg , Tamoxifen Tab Ip 10 Mg , Vinblastine Inj Ip 10Mg / 10Ml , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Carboplatin Injection Ip 150 Mg , Carboplatin Injection Ip 450 Mg , Cisplatin Inj Ip 10 Mg / 10 Ml , Dacarbazine Injection 500 Mg Usp / Bp , Filgrastim Injection Ip ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcg , Gemcitabine For Injection 200 Mg , Gemcitabine For Injection Ip 1Gm , Ifosfamide Injection Ip / Bp / Usp 1Gm , Imatinib Tab Ip 400Mg , Methotrexate Tablets Ip 10 Mg , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg , Oxaliplatin Injection Usp 50 Mg , Cyclosporin Capsule Usp / Ip 50 Mg , Procarbazine Hydrochloride Capsule Usp 50 Mg ( Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg ) , Bendamustine Injection 100 Mg , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) , Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg ) , Bortezomib Injection 2Mg , Abiraterone Acetate Tablet Ip 250 Mg ( Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg ) , Lomustine Capsule Ip 40 Mg ( Each Capsule Contains Lomustine Ip 40 Mg ) , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) , Bevacizumab Injection 400 Mg , Bevacizumab Injection 100 Mg , Cyclophosphamide Tablet Ip 50 Mg ( Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg ) , Gefitinib Tablet Ip 250 Mg ( Each Film Coated Tablet Contains Gefitinib Ip 250 Mg ) , Mycophenolate Mofetil Capsule / Tablets Ip 250 Mg ( Each Capsule / Tablets Conatin Mycophenolate Mofetil Ip 250 Mg ) , Tacrolimus Capsule Ip 0.5 Mg ( Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg ) , Mycophenolate Sodium Tablet 360 Mg ( Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg ) , Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) , Zoledronic Acid Injection Ip 4Mg Vial , Dasatinib Tab 100 Mg , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Trihexyphenidyl Hcl Tab Ip 2 Mg , Bromocriptine Tablets Ip 2.5 Mg , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) , Enoxaparin Sodium Inj Ip 60 Mg , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) , Human Albumin Solution Ip 20% , Rh-Erythropoetin Inj Ip 10000 Iu , Rh-Erythropoetin Inj Ip 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Factor Ix Concentrate ( Purified ) Ip 500-600 I.U. ( Human Coagulation Factor Ix ) , Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial ) , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion , Tranexamic Acid Tablets Ip 500 Mg , Warfarin Sodium. Tab Ip 5Mg , Vitamin K-1 ( Phytomenadione ) Ip 1Mg / 0.5Ml Injection ( Detail In Rc ) , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial , Recombinant Coagulation Factor Viia 1Mg , Recombinant Coagulation Factor Viia 2Mg , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size , Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) , Feracrylum 1% W / V Sterile Solution 100 Ml , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size , Recombinant F Ix 500 Iu With Diluent , 3Rd Generation Recombinant F Viii 250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amiodarone Hydrochloride Inj 50 Mg / Ml , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Clopidogrel Tab Ip 75 Mg , Digoxin Inj Ip 0.25 Mg / Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dobutamine Inj Ip 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Ip 250 Mg / 5Ml ( Amp ) , Dopamine Hydrochloride Inj Ip 40 Mg / Ml , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tab Ip 2.5Mg , Isosorbide Dinitrate Tab Ip 5 Mg , Isosorbide Mononitrate Tabs Ip 20 Mg , Lisinopril Tab Ip 5 Mg , Losartan Tab Ip 50 Mg , Magnesium Sulphate Inj. Ip 500Mg / Ml ( 50%W / V ) , Methyldopa Tab Ip 250Mg Film Coated , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) , Nitroglycerin Inj 5 Mg / Ml , Propranolol Tab Ip 40 Mg , Streptokinase Injection 15 Lac Units Ip , Verapamil Tab Ip 40 Mg Film Coated , Labetalol Tab Ip 100Mg , Labetalol Hcl Inj Ip 20Mg / 4Ml , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) , Atenolol Tab Ip 25 Mg , Enalapril Maleate Tablets Ip 10 Mg , Lisinopril Tablets Ip 10 Mg , Lisinopril Tab Ip 2.5 Mg , Losartan Tab Ip 25 Mg , Adenosine Injection Ip 6 Mg / 2Ml , Atorvastatin Tablets Ip 40 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Fenofibrate Capsules / Tab Ip 200 Mg , Isoprenaline Injection Ip 2Mg / Ml , Metoprolol Tablets Ip 25 Mg , Metoprolol Succinate Extended Release Tablets Ip 50 Mg , Noradrenaline Injection Ip 2 Mg / Ml , Prazosin Tablets ( Extended Release ) 2.5 Mg , Telmisartan Tablets Ip 40 Mg , Urokinase Injection 5 Lac Unit ( Lyophilized ) , Ramipril Tablets Ip 2.5 Mg , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Clonidine Hydrochloride Tablet Ip 0.1 Mg ( Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg ) , Sotalol Hydrochloride Tablet Usp / Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40Mg ) , Esmolol Hydrochloride Injection 10Mg / Ml 10Ml Size , Sodium Nitroprusside Injection 25Mg / Ml 2Ml Size , Carvedilol Tablet 3.125 Mg , Rosuvastatin Tablet Ip 20 Mg ( Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg ) , Rosuvastatin Tablet 10 Mg , Sacubitril 24 Mg And Valsartan 26 Mg Tablet , Chlorhexidine Mouthwash Ip 0.2 O / O , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O , Acyclovir Cream 5% , Cetrimide Cream Ip 15 Gm , Fusidic Acid Cream Ip 2% , Glycerin Ip 400 Gm , Liquid Paraffin Ip 400 Ml , Miconazole Nitrate Cream Ip 2% , Povidone Iodine Ointment 5% 15 Gm , Neomycin Bacitracin And Sulphacetamide Powder ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Gentian Violet Topical Solution Usp 1O / O , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) , Betamethasone Dipropionate Cream Ip 0.05% , Betamethasone Lotion Ip 0.05 O / O , Clindamycin Phosphate Gel Usp 1 O / O , Clobetasol Propionate Cream Ip 0.05 O / O , Glycerin Ip 100 Ml , Ketoconazole Cream 2% , Permethrin Lotion 5% , Permethrin Cream 5% , Tretenoin Cream Usp 0.025% , Coal Tar 6% & Salicylic Acid 3% Ointment , Calamine Lotion Ip 100Ml , Powder Clotrimazole 1% W / W 30 Gm , Terbinafine Cream 1%W / W ( 10 Gm Tube ) , Olopatadine Hydrochloride Ophthalmic Solution 0.1% W / V Ip ( E / D ) 5Ml Size , Oitment Mupirocin Ip 2% , Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) , Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) , Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) , Gadodiamide Inj. 0.5Mml / Ml Vial , Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. , Multistix Test Strip , Povidone Iodine Solution Ip 5 % 500 Ml , Compound Benzoin Tincture Ip , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) , Gluteraldehyde Solution 2% , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) , Surgical Spirit Ip ( 500 Ml ) , Chlorhexidine Gluconate Solution 5% 250 Ml , Surgical Spirit Ip ( 100 Ml ) , Povidone Iodine Solution Ip 5% 100Ml Bottle , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Solution Ip 10 % , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , Acetazolamide Tab Ip 250Mg , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) , Hydrochlorthiazide Tab Ip 12.5 Mg , Mannitol Inj Ip 20% W / V , Spironolactone Tab Ip 25Mg , Torsemide Tab 10 Ip Mg , Hydrochlorthiazide Tab Ip 25Mg , Torsemide Inj 10 Mg / Ml , Spironolactone Tablets Ip 50 Mg , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Bisacodyl Tab Ip 5 Mg , Dicyclomine Tab Ip 10 Mg , Dicyclomine Inj Ip 10 Mg / Ml , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml , Domperidone Suspension Ip 5Mg / 5Ml , Domperidone Tab Ip 10 Mg , Hyoscine Butylbromide Inj Ip 20 Mg / Ml , Loperamide Tab Ip 2 Mg , Metoclopramide Inj Ip 10Mg / 2Ml , Metoclopramide Tab Ip 10 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg / Ml , Ors Powder Ip , Pentoprazole Inj 40 Mg , Ranitidine Hcl Injection Ip 50Mg / 2Ml , Ranitidine Tab Ip 150Mg Film Coated , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O , Hyoscine Butyl Bromide Tablets Ip 10Mg , Drotaverine Tab Ip 40 Mg , Ranitidine Tab Ip 300Mg Film Coated , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml , Liquid Paraffin Ip 100 Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Ursodeoxycholic Acid Tablets Ip 300 Mg , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) , Allopurinol Tablets Ip 100 Mg , Hydroxychloroquine Sulphate Tablets 200Mg , Leflunomide Tablets Ip 10Mg ( Film Coated ) , Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) , Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) , Carbimazole Tabs Ip 5 Mg ( Film Coated ) , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg / Ml , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Conjugated Estrogen Tabs Usp 0.625 Mg. , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe , Ethinyloestradiol Tabs Ip 50 Mcg , Glibenclamide Tab Ip 5 Mg , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 2 Mg , Glimepiride Tab Ip 1Mg , Glipizide Tab Ip 5Mg , Hydroxyprogesterone Inj Ip 250Mg / Ml , Isophane Insulin Inj Ip 40 Iu / Ml , Metformin Tab Ip 500 Mg ( Film Coated ) , Norethisterone Tab Ip 5 Mg , Pioglitazone Tab Ip 15 Mg , Progesterone Inj 200 Mg / 2Ml , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) , Thyroxine Sodium Tablets Ip 100Mcg , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets Ip ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) , Glucagon For Injection Usp 1 Mg / Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Thyroxine Tablets Ip 50 Mcg , Octreotide Injection 50 Mcg / Ml , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges , Tenaligliptin Tablet Ip 20Mg , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) , Human Anti D Immunoglobulin 150 Mcg , Human Rabies Immunoglobulin Inj 150 Iu / Ml , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) , Tetanus Immunoglobulin Ip 250 Iu / Vial , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) , Diphtheria Antitoxin 10000 Iu , Hepatitis B Immunologlobin Injection Ip 200 I.U , Human Immunoglobulin Inj With 12%Igm, 12%Iga, 76%Igg In Pack Of 10Ml ( 0.5Gm ) , Atracurium Inj 10 Mg / Ml , Glycopyrrolate Inj Ip 0.2 Mg / Ml , Midazolam Inj Ip 1 Mg / Ml , Neostigmine Inj Ip 0.5 Mg / Ml , Neostigmine Tab Ip 15 Mg , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) , Valethamate Bromide Inj 8Mg / Ml , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) , Neostigmine Injection Ip 2.5Mg / 5Ml , Cis Atracurium Besylate Injection 2 Mg / Ml In 5 Ml Vial , Tropicamide Eye Drop Ip 1O / O , Atropine Eye Ointment Ip 1% , Atropine Sulphate Ophthalmic Solution Usp 1% , Chloramphenicol Eye Drops Ip 0.5 0 / 0 , Ciprofloxacin Eye Drops Ip 0.3 O / O W / V , Ciprofloxacin Ophthalmic Ointment Usp 0.3% , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O , Tobramycin Eye Drops 0.3% [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Lidocaine Hcl Topical Solution Usp 4% , Fluconazole Eye Drops 0.3% , Timolol Eye Drops Ip 0.5 O / O W / V , Homatropine Eye Drops Ip 2% , Travoprost Eye Drops Ip 0.004 O / O , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Betaxolol Eye Drops 0.5 O / O , Carboxymethylcellulose Eye Drops Ip 0.5% , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size , Isoxsuprine Inj Ip 5 Mg / Ml , Isoxsuprine Tab Ip 20 Mg , Methylergometrine Inj Ip 0.2 Mg / Ml , Methylergometrine Tab Ip 0.125 Mg , Misoprostol Tab Ip 200 Mcg , Oxytocin Inj Ip 5 Iu / Ml , Mifepristone Tab Ip 200Mg , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) / Natural Micronised Progesteron Tablet 200 Mg ( Each Tablet Contains Progesteron Ip 200 Mg ) , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) , Human Chorionic Gonadotropin Injection Ip 5000 I.U. , Leurprolide Acetate Depot 3.75 Mg , Leurprolide Acetate Depot 11.25 Mg , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amitriptyline Tab Ip 25Mg Film Coated , Chlordiazepoxide Tablets Ip 10Mg , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) , Chlorpromazine Inj. Ip 25Mg / Ml , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) , Diazepam Tab Ip 5 Mg , Escitalopram Tab Ip 10 Mg , Fluoxetine Cap Ip 20 Mg , Haloperidol Inj Ip 5 Mg / Ml , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Imipramine Tab Ip 25 Mg ( Coated Tab ) , Imipramine Tab Ip 75 Mg ( Coated ) , Lithium Carbonate Tab Ip 300 Mg , Lorazepam Inj Ip 2 Mg / Ml , Olanzapine Tab Ip 5 Mg , Risperidone Tab 2Mg , Risperidone Tab 1 Mg , Sertraline Tab Ip 50 Mg , Trifluperazine Tab Ip 5 Mg Coated , Quetiapine Tablet Ip 50Mg , Quetiapine Tablet Ip 25Mg , Clonazepam Tablet 0.5 Mg , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Zolpidem Tablet 5 Mg , Aminophylline Inj Ip 25 Mg / Ml , Beclomethasone Inhalation Ip 200 Mcg / Dose , Budesonide Nebulizer Suspension 0.25Mg / Ml , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S. , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml , Salbutamol Tablet Ip 4 Mg , Salbutamol Inhalation 100 Mcg / Dose , Salbutamol Nebuliser Solution Bp 5 Mg / Ml , Salbutamol Tab Ip 2 Mg , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) , Salbutamol Syrup Ip 2Mg / 5Ml , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Budesonide Powder For Inhalation 200 Mcg , Ipratropium Powder For Inhalation Ip 40 Mcg , Terbutaline Tablets Ip 2.5 Mg , Xylometazoline Nasal Drops Ip 0.1% , Cough Syrup / Expectorant ( 50 ) Ml , Acebrophylline Tablet / Capsule 100 Mg , Compound Sodium Lactate Inj. Ip , Dextrose Inj Ip 25% W / V , Dextrose Inj Ip 10% , Dextrose Inj Ip 5% , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection ) , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Potassium Chloride Inj. 0.15 Gm / Ml , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W / V Polypack 500 Ml , Finasteride Tablets Ip 5 Mg , Tamsulosin Hcl Tablets / Capsule 0.4 Mg , Flavoxate Tablets Ip 200 Mg ( Coated Tablet ) , Savelamer Carbonate Tablet 400 Mg ( Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg ) , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) , Levamisol Hydrochloride Tablet Ip 50 Mg ( Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg ) , Phenazopyridine Tablet 5 Mg , Dutasteride Tablet 0.5 Mg , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) , Betahistine Tab Ip 8 Mg , Betahistine Tab Ip 16 Mg , Cinnarizine Tablets Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , Ascorbic Acid Tab Ip 500 Mg , Calcium Gluconate Inj Ip 10% ( Iv Use ) , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Folic Acid Tab Ip 5 Mg , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) , Cholecalciferol Granules 60, 000 Iu / Gm , Mecobalamin Inj 500 Mcg / Ml , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Thiamine Tablets Ip 100 Mg , Calcitriol Capsules Ip 0.25 Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Cobalmine Tablet 1500Mcg , Vitamin D3 Oral Solution 60000 Iu , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size , Multi Vitamin Syrup , Flunarizine Tab 5 Mg , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Peritonial Dialysis Solution Ip , Sodium Bicarbonate Inj Ip 7.5% W / V , Water For Inj Ip , Alendronate Sodium Tablets Usp / Bp 35 Mg , Mannitol With Glycerin Injection 10 O / O + 10 O / O W / V ( For Intravenous Infusion ) , Normal Human Intravenous Immunoglobulin 5G / 100Ml , Pregabalin Cap Ip 75 Mg , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Intravenous Fat Emulsion 20% W / V 250Ml , Pyridostigmine Tablet Ip 60 Mg ( Each Tablet Contains Pyridostigmine Ip 60 Mg ) , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size , Amino Acid 10% Injection 100Ml Size , Vitamin E Capsule 400 Mg , Inj Poractant Alpha 80 Mg / Ml In Pack Of 1.5 Ml ( Detail In Rc ) , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg , Liposomol Amphotericine Injection B 50Mg , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 , Absorbable Surgical Suture ( Sterile Catgut ) , Needled Suture Chromic Size-3 / 0 ( 3 / 8 Cir Rcutting Needle 26Mm, Length 76 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 ( Details In Rc ) , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 ( Details In Rc ) , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 ( Details In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 4 / 0 ( 3 / 8 Conventional Cutting Needle 19Mm Length 60 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 5 / 0 ( 3 / 8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb 13 Mm Needle, Length 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue ( 3 / 8Cir Rb 16 Mm Needle, Length 90 Cm ) Size 6 / 0 , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 7 / 0 ( 3 / 8Cir Rb Double 8Mm Needle, Length 60 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb Double Needle 17Mm Length 90 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Tapercut Double Needle 17Mm Length 70 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Tapercut Needle 17Mm Length 75 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Tapercut Needle, 25 Mm Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Rb Needle 16 Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 8 / 0 ( 3 / 8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Circle Tapercut 13Mm Double Needle 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Circle Cc 13Mm Needle, Suture Length Of 70Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Suture Length Of 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 4 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 75 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) ( Detail In Rc ) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2 / 0 1 / 2 Circle Taper Cut, 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2-0 1 / 2 Circle Taper Cut, 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green / White Or Blue / White Coated Polyster Braided ( Green / Blue ) With Size 3 / 0 1 / 2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 10 / 0 ( 3 / 8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 ( Details In Rc ) , B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 ( Details In Rc ) , Absorbable Surgical Sutures, Sterilised Needled Polyglecaprone / Polyglyconate, Monofilament Sutures Size 2 / 0 ( 1 / 2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate, Size 3 / 0 ( 1 / 2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 4 / 0 ( 1 / 2 Circle Cutting 16Mm Needle, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 ( 1 / 2 Circle Reverse Cutting 50 Mm Length 90Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2 / 0 ( 1 / 2 Circle Rb 31Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm , Absorbable Gelatin Sponge 80 X 50X 10Mm ( Details In Rc ) , Absorbent Cotton Wool Ip 500 Gm , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set Blood Transfusion Set ( Details In Rc ) , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) ( Details In Rc ) , Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-6 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-8 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-10 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-12 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-14 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-16 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-18 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-20 ( Details In Rc ) , Suction Catheter, Sterile. Size: F G-22 ( Details In Rc ) , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) , Infant Feeding Tube Size 10Fg ( Details In Rc ) , Infant Feeding Tube Size 8Fg ( Details In Rc ) , Infant Feeding Tube Size 5Fg ( Details In Rc ) , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable ( Details In Rc ) , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable ( Details In Rc ) , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable ( Details In Rc ) , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G ( Details In Rc ) , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G ( Details In Rc ) , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc ) , Mucus Extractor Sterile ( Details In Rc ) , Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc ) , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics ( Details In Rc ) , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll , Plaster Of Paris Bandage 10Cm X 2.7Mts , Ryles Tube / Nasogastric Tube Size: 10 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 12 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size:14 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 16 ( Details In Rc ) , Ryles Tube / Nasogastric Tube Size: 18 ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 18G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 20G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 22G ( Details In Rc ) , Scalp Vein Set ( Disposable ) Size 24 G ( Details In Rc ) , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) , Surgical Blade Sterile, Size 11 ( Details In Rc ) , Surgical Blade Sterile, Size 15 ( Details In Rc ) , Surgical Blade Sterile, Size 22 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 ( Details In Rc ) , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 ( Details In Rc ) , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 ( Details In Rc ) , Suture Needles Curved And Cutting Size 1-5 ( Details In Rc ) , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch ( Details In Rc ) , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch ( Details In Rc ) , Urine Collecting Bag, Disposable 2000 Ml ( Details In Rc ) , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Plain - Size 2.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 3 ( Details In Rc ) , Endotracheal Tube, Plain - Size 3.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 4 ( Details In Rc ) , Endotracheal Tube, Plain - Size 4.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 5.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 6 ( Details In Rc ) , Endotracheal Tube, Plain -Size 6.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 7 ( Details In Rc ) , Endotracheal Tube, Plain - Size 7.5 ( Details In Rc ) , Endotracheal Tube, Plain - Size 8 ( Details In Rc ) , Endotracheal Tube, Plain - Size 8.5 ( Details In Rc ) , Endotracheal Tube, Cuffed - Size 4 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 4.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 5 Details In Rc , Endotracheal Tube, Cuff - Size 6 ( Details In Rc ) , Endotracheal Tube, Cuff- Size 6.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 7 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 7.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 8 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 8.5 ( Details In Rc ) , Endotracheal Tube, Cuff - Size 9 ( Details In Rc ) , Tracheostomy Tube, Plain - All Sizes ( Details In Rc ) , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes ( Details In Rc ) , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 ( Details In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 ( Details In Rc ) , Corrugated Drainage Sheet - All Sizes ( Details In Rc ) , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm ( Details In Rc ) , Bone Wax Sterilised , Temporary Cardiac Pacing Wire ( Electrode ) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Skin Graft Knife Blade ( Sterile ) ( Details In Rc ) , K Wire, Length 375 Mm; 1Mm ( Details In Rc ) , K Wire, Length 375 Mm; 1.6Mm ( Details In Rc ) , K Wire, Length 375 Mm; 1.8Mm ( Details In Rc ) , Face Mask, Disposable ( Details In Rc ) , Surgical Cap Disposable ( For Surgeons ) ( Details In Rc ) , Surgical Cap, Disposable ( For Nurses ) ( Details In Rc ) ( Details In Rc ) , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 11 To 17.5 , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 18 To 24 , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 24.5 To 28.5 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 11 To 17.5 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 18 To 24 , Standard Pama Intra Ocular Lenses ( Details In Rc ) 24.5 To 28.5 , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free , Rubber Examination Gloves, Non-Sterile, Extra Small ( Details In Rc ) , Rubber Examination Gloves, Size Small ( Details In Rc ) , Rubber Examination Gloves, Size Medium ( Details In Rc ) , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large ( Details In Rc ) , Pressure Monitoring Line / High Pressure Extension Line ( Details In Rc ) , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml ( Details In Rc ) , Umbilical Catheter For New Born, All Sizes - ( Details In Rc ) , Umbilical Cord Clamp ( Details In Rc ) , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property ( Details In Rc ) , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 ( Details In Rc ) , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 ( Details In Rc ) , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- ( Details In Rc ) , Bone Cement , Sanitary Napkin Beltless ( Details In Rc ) , Sanitary Pads Belt Type ( Details In Rc ) , Sanitary Napkin Beltless With Wings ( Details In Rc ) , Oxygen Mask ( Adult ) , Oxygen Mask ( Pediatric ) , Foleys Catheter No. 14 ( Detail In Rc ) , Nelaton Catheter Size 14 Fg ( Detail In Rc ) , Ecg Electrode ( Detail In Rc ) , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 ( Detail In Rc ) , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml ( Detail In Rc ) , Urethral Catheter 90 ( Fg-14 ) Made Up Of Medical Grade Pvc ( Detail In Rc ) , Urethral Catheter 91 ( Fg-10 ) , Made Up Of Medical Grade Pvc ( Detail In Rc ) , Vaccum Suction Set, 2.5 Meter Length ( Detail In Rc ) , Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 10Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 50Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 100Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 150Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) ( Detail In Rc ) , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) , Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support ( Detail In Rc ) , Nebulization Mask Adult ( Detail In Rc ) , Nebulization Mask Paediatric ( Detail In Rc ) , Chemotherapy Port And Non-Coring Needles ( Adult ) ( Detail In Rc ) , Chemotherapy Port & Non-Coring Needles ( Pediatric ) ( Detail In Rc ) => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Rajasthan View Result →
19.
Health and Family Welfare #8903402 Technical Bid
supply of medicine consumable drugs Mukhye Mantri Nishulk Dawa Yojnatragat Jenrik Dawaiyoo Avam Consuble Ki Dar Sambida Suchi Mukhye Mantri Nishulk Dawa Yojnatragat Jenrik Dawaiyoo Avam Consuble Ki Dar Sambida Suchi , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg [ 2 ] , Bupivacaine Inj Ip 0.5% [ 4 ] , Ketamine Inj Ip 50 Mg / Ml [ 8 ] , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg [ 10 ] , Fentanyl Citrate Injection 50Mcg / Ml [ 655 ] , Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use [ 695 ] , Paracetamol Infusion Ip 1% W / V 100Ml Size [ 696 ] , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) [ 698 ] , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) [ 699 ] , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg [ 44 ] , Prednisolone Tab Ip 20 Mg [ 470 ] , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) [ 700 ] , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml [ 500 ] , Carbamazepine Tab Ip 200 Mg [ 53 ] , Phenytoin Oral Suspension Ip 25Mg / Ml [ 58 ] , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml [ 474 ] , Levetiracetam Tablet Ip 500 Mg [ 664 ] , Gabapentine Tablet / Capsule 100Mg [ 667 ] , Gabapentine Tablet / Capsule 300Mg [ 668 ] , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) [ 702 ] , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) [ 703 ] , Topiramate Tablet Ip 25 Mg ( Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) [ 705 ] , Acyclovir Oral Suspension Ip 400Mg / 5Ml [ 62 ] , Acyclovir Tab Ip 200 Mg [ 63 ] , Acyclovir Tab Ip 800 Mg [ 64 ] , Amikacin Inj Ip 100 Mg [ 67 ] , Cefixime Tab Ip 100 Mg [ 84 ] , Cefixime Tab Ip 200 Mg [ 85 ] , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) [ 86 ] , Ceftazidime Inj Ip 1G [ 89 ] , Ceftazidime Inj Ip 250 Mg [ 90 ] , Ceftazidime Inj Ip 500 Mg [ 91 ] , Itraconazole Cap 100 Mg [ 118 ] , Cloxacillin Sodium Inj Ip 500Mg [ 417 ] , Amikacin Inj Ip 250 Mg [ 504 ] , Cefepime Injection Ip 500 Mg [ 510 ] , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) [ 511 ] , Levofloxacin Tablets Ip 250 Mg [ 515 ] , Linezolid Tablets Ip 600 Mg [ 516 ] , Linezolid Inj 200Mg / 100Ml [ 517 ] , Vancomycin For Intravenous Infusion Ip 500 Mg [ 523 ] , Ceftriaxone 1 Gm + Tazobactum 125 Mg Injection [ 708 ] , Cefadroxil Dispersible Tablet 250 Mg ( Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg ) [ 709 ] , Cefadroxil Tablet 500 Mg [ 710 ] , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size [ 711 ] , Terbinafine Hydrochloride Tablet 250 Mg [ 721 ] , Azathioprine Tab Ip 50 Mg [ 133 ] , Methotrexate Inj Ip 50 Mg / 2 Ml [ 153 ] , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg [ 160 ] , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg [ 161 ] , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg [ 163 ] , Enoxaparin Sodium Inj Ip 60 Mg [ 172 ] , Rh-Erythropoetin Inj Ip 10000 Iu [ 176 ] , Rh-Erythropoetin Inj Ip 2000Iu [ 177 ] , Rh-Erythropoetin Inj 4000 Iu [ 179 ] , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) [ 180 ] , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size [ 747 ] , Amiodarone Tab Ip 100 Mg [ 181 ] , Amiodarone Tab Ip 200 Mg [ 182 ] , Amiodarone Hydrochloride Inj 50 Mg / Ml [ 183 ] , Digoxin Inj Ip 0.25 Mg / Ml [ 189 ] , Digoxin Tab Ip 0.25 Mg. [ 190 ] , Lisinopril Tab Ip 5 Mg [ 199 ] , Streptokinase Injection 15 Lac Units Ip [ 209 ] , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) [ 457 ] , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) [ 458 ] , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg [ 460 ] , Lisinopril Tablets Ip 10 Mg [ 465 ] , Lisinopril Tab Ip 2.5 Mg [ 466 ] , Adenosine Injection Ip 6 Mg / 2Ml [ 547 ] , Isoprenaline Injection Ip 2Mg / Ml [ 551 ] , Prazosin Tablets ( Extended Release ) 2.5 Mg [ 555 ] , Urokinase Injection 5 Lac Unit ( Lyophilized ) [ 557 ] , Ramipril Tablets Ip 2.5 Mg [ 636 ] , Clonidine Hydrochloride Tablet Ip 0.1 Mg ( Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg ) [ 751 ] , Esmolol Hydrochloride Injection 10Mg / Ml 10Ml Size [ 753 ] , Carvedilol Tablet 3.125 Mg [ 755 ] , Rosuvastatin Tablet Ip 20 Mg ( Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg ) [ 756 ] , Rosuvastatin Tablet 10 Mg [ 757 ] , Sacubitril 24 Mg And Valsartan 26 Mg Tablet [ 758 ] , Chlorhexidine Mouthwash Ip 0.2 O / O [ 580 ] , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) [ 581 ] , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel [ 584 ] , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) [ 443 ] , Betamethasone Lotion Ip 0.05 O / O [ 559 ] , Coal Tar 6% & Salicylic Acid 3% Ointment [ 670 ] , Powder Clotrimazole 1% W / W 30 Gm [ 759 ] , Terbinafine Cream 1%W / W ( 10 Gm Tube ) [ 760 ] , Oitment Mupirocin Ip 2% [ 762 ] , Acetazolamide Tab Ip 250Mg [ 253 ] , Mannitol Inj Ip 20% W / V [ 257A ] , Torsemide Tab 10 Ip Mg [ 259 ] , Hydrochlorthiazide Tab Ip 25Mg [ 464 ] , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops [ 586 ] , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp [ 588 ] , Hyoscine Butyl Bromide Tablets Ip 10Mg [ 414 ] , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) [ 765 ] , Allopurinol Tablets Ip 100 Mg [ 598 ] , Hydroxychloroquine Sulphate Tablets 200Mg [ 599 ] , Leflunomide Tablets Ip 10Mg ( Film Coated ) [ 600 ] , Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) [ 601 ] , Sulfasalazine Gastroresistant Tablets Ip 500 Mg Ip [ 602 ] , Carbimazole Tabs Ip 5 Mg ( Film Coated ) [ 280 ] , Clomifene Tab Ip 25 Mg [ 282 ] , Clomiphene Tab Ip 50 Mg [ 283 ] , Pioglitazone Tab Ip 15 Mg [ 297 ] , Progesterone Inj 200 Mg / 2Ml [ 298 ] , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) [ 452 ] , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) [ 453 ] , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges [ 680 ] , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle [ 693 ] , Glycopyrrolate Inj Ip 0.2 Mg / Ml [ 312 ] , Midazolam Inj Ip 1 Mg / Ml [ 313 ] , Atropine Eye Ointment Ip 1% [ 319 ] , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O [ 330 ] , Tobramycin Ophthalmic Ointment Usp 0.3% [ 332 ] , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V [ 421 ] , Lidocaine Hcl Topical Solution Usp 4% [ 424 ] , Fluconazole Eye Drops 0.3% [ 425 ] , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% [ 487 ] , Betaxolol Eye Drops 0.5 O / O [ 612 ] , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size [ 770 ] , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) [ 773 ] , Chlordiazepoxide Tablets Ip 10Mg [ 342 ] , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) [ 343 ] , Escitalopram Tab Ip 10 Mg [ 351 ] , Fluoxetine Cap Ip 20 Mg [ 352 ] , Lorazepam Inj Ip 2 Mg / Ml [ 359 ] , Sertraline Tab Ip 50 Mg [ 363 ] , Clonazepam Tablet 0.5 Mg [ 678 ] , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) [ 778 ] , Zolpidem Tablet 5 Mg [ 779 ] , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml [ 369 ] , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg [ 616 ] , Ipratropium Powder For Inhalation Ip 40 Mcg [ 618 ] , Terbutaline Tablets Ip 2.5 Mg [ 619 ] , Xylometazoline Nasal Drops Ip 0.1% [ 620 ] , Acebrophylline Tablet / Capsule 100 Mg [ 780 ] , Potassium Chloride Inj. 0.15 Gm / Ml [ 383 ] , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml [ 384 ] , Ringer Acetate Infusion 500 Ml [ 781 ] , Sodium Chloride 0.45% W / V Polypack 500 Ml [ 782 ] , Finasteride Tablets Ip 5 Mg [ 575 ] , Tamsulosin Hcl Tablets / Capsule 0.4 Mg [ 576 ] , Flavoxate Tablets Ip 200 Mg ( Coated Tablet ) [ 579 ] , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) [ 784 ] , Dutasteride Tablet 0.5 Mg [ 787 ] , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) [ 788 ] , Betahistine Tab Ip 8 Mg [ 541 ] , Betahistine Tab Ip 16 Mg [ 542 ] , Cholecalciferol Granules 60, 000 Iu / Gm [ 623 ] , Mecobalamin Inj 500 Mcg / Ml [ 624 ] , Pyridoxine Tablet Ip 10 Mg [ 626 ] , Pyridoxine Tablet Ip 40Mg [ 627 ] , Thiamine Tablets Ip 100 Mg [ 629 ] , Calcitriol Capsules Ip 0.25 Mcg [ 630 ] , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size [ 789 ] , Multi Vitamin Syrup [ 790 ] , Flunarizine Tab 5 Mg [ 147 ] , Normal Human Intravenous Immunoglobulin 5G / 100Ml [ 633 ] , Pregabalin Cap Ip 75 Mg [ 634 ] , Vitamin E Capsule 400 Mg [ 795 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 [ R2 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 [ R3 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 [ R4 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 [ R5 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 [ R6 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm [ R9 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm [ R10 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm [ R11 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm [ R12 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm [ R13 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed [ R14 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) [ R15 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm [ R16 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) [ R17 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm [ R18 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm [ R19 ] , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 ( Details In Rc ) [ R76 ] , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 ( Details In Rc ) [ R77 ] , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 ( Details In Rc ) [ R80 ] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) [ R20 ] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) [ R22 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) [ R23 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) [ R24 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) [ R27 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) [ R28 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) [ R33 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm [ R37 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) [ R38 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) [ R44 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) [ R45 ] , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 ( Details In Rc ) [ R78 ] , B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 ( Details In Rc ) [ R79 ] , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) [ R64 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) [ R67 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm [ R68 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm [ R69 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm [ R70 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm [ R71 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm [ R72 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm [ R73 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm [ R74 ] , Plaster Of Paris Bandage 10Cm X 2.7Mts [ S22 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 ( Details In Rc ) [ S31 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 ( Details In Rc ) [ S32 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 ( Details In Rc ) [ S33 ] , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 ( Details In Rc ) [ S35 ] , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 ( Details In Rc ) [ S36 ] , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 ( Details In Rc ) [ S37 ] , Bone Wax Sterilised [ S80 ] , Umbilical Catheter For New Born, All Sizes - ( Details In Rc ) [ S93 ] , Nelaton Catheter Size 14 Fg ( Detail In Rc ) [ S103 ] , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 ( Detail In Rc ) [ S105 ] , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml ( Detail In Rc ) [ S106 ] , Urethral Catheter 90 ( Fg-14 ) Made Up Of Medical Grade Pvc ( Detail In Rc ) [ S107 ] , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) [ S126 ] , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) [ S127 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent ( Detail In Rc ) [ S131 ] , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg [ 2 ] , Bupivacaine Inj Ip 0.5% [ 4 ] , Halothane Bp [ 6 ] , Isoflurane Usp [ 7 ] , Ketamine Inj Ip 50 Mg / Ml [ 8 ] , Lignocaine Ointment 5 O / O [ 9 ] , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg [ 10 ] , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg [ 11 ] , Lignocaine Gel Ip 2% [ 12 ] , Lignocaine Inj Ip 2 O / O [ 13 ] , Propofol Inj Ip 10 Mg / Ml [ 14 ] , Thiopentone Inj Ip 0.5 G [ 15 ] , Sevoflurane [ 491 ] , Atropine Sulphate Injection 0.6Mg / Ml [ 654 ] , Liquid Medical Oxygen ( Lmo ) [ 799 ] , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) [ 19 ] , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) [ 20 ] , Fentanyl Citrate Injection Ip 2 Ml [ 21 ] , Ibuprofen And Paracetamol Tablets Ip Ibuprofen 400 Mg+Paracetamol 325 Mg [ 22 ] , Ibuprofen Tab Ip 200 Mg ( Coated ) [ 23 ] , Ibuprofen Tab Ip 400 Mg ( Coated ) [ 24 ] , Morphine Sulphate Inj Ip 10Mg / Ml [ 25 ] , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) [ 26 ] , Paracetamol Syrup Ip 125 Mg / 5Ml ( Detail In Rc ) [ 27 ] , Paracetamol Tab Ip 500 Mg [ 28 ] , Paracetamol Inj. 150 Mg / Ml [ 29 ] , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) [ 30 ] , Tramadol Cap Ip 50 Mg [ 32 ] , Tramadol Inj 50 Mg / Ml [ 33 ] , Indomethacin Cap Ip 25 Mg [ 436 ] , Diclofence Prolonged Release Tablet Ip 100 Mg [ 437 ] , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml [ 477 ] , Diclofenac Sod + Paracetamol Tablets Ip Diclofenac Sod 50 Mg + Paracetamol 325 Mg [ 483 ] , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 Mg [ 492 ] , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% [ 493 ] , Etoricoxib Tab Ip 120Mg [ 495 ] , Mefenamic Acid Tablets Bp 500 Mg [ 496 ] , Fentanyl Citrate Injection 50Mcg / Ml [ 655 ] , Naproxen Tablet Ip 500Mg [ 656 ] , Naproxen Tablet Ip 250Mg [ 657 ] , Etoricoxib Tablet 90 Mg [ 658 ] , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg [ 679 ] , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size [ 694 ] , Diclofenac Sodium Aqueous Injection 75Mg / Ml 1Ml Size, Iv & Im Use [ 695 ] , Paracetamol Infusion Ip 1% W / V 100Ml Size [ 696 ] , Ketorolac Tromethamine Dispersible Tablet 10 Mg ( Each Uncoated Dispersible Tablet Contains Ketorolac Tromethamine 10 Mg ) [ 697 ] , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) [ 698 ] , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) [ 699 ] , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use [ 34 ] , Betamethasone Tab Ip 0.5Mg [ 35 ] , Chlorpheniramine Maleate Tab Ip 4Mg [ 37 ] , Dexamethasone Inj Ip 8Mg / 2Ml [ 39 ] , Dexamethasone Tab Ip 0.5 Mg [ 40 ] , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) [ 42 ] , Hydroxyzine Tab Ip 25 Mg [ 43 ] , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg [ 44 ] , Pheniramine Inj Ip 22.75Mg / Ml [ 45 ] , Prednisolone Tab Ip 5 Mg [ 47 ] , Promethazine Syrup Ip 5 Mg / 5Ml [ 48 ] , Promethazine Inj Ip 25Mg / Ml [ 49 ] , Promethazine Tab Ip 25 Mg [ 50 ] , Betamethasone Sod Phos Inj Ip 4Mg / Ml [ 418 ] , Prednisolone Tablet Ip 10 Mg [ 469 ] , Prednisolone Tab Ip 20 Mg [ 470 ] , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg [ 497 ] , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab [ 498 ] , Cetirizine Syrup Ip 5Mg / 5 Ml [ 499 ] , Levoceitrizine Tablet 5Mg [ 659 ] , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) [ 660 ] , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg ) [ 700 ] , Naloxone Inj Ip 0.4Mg / Ml [ 51 ] , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg [ 52 ] , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml [ 500 ] , Carbamazepine Tab Ip 200 Mg ( Film Coated ) [ 53 ] , Carbamazepine Tab Ip 100 Mg [ 54 ] , Phenobarbitone Tab Ip 30 Mg [ 56 ] , Phenytoin Injection Bp 50Mg / Ml [ 57 ] , Phenytoin Oral Suspension Ip 25Mg / Ml [ 58 ] , Phenytoin Tab Ip 100 Mg ( Film Coated ) [ 59 ] , Sodium Valproate Inj 100 Mg / Ml [ 60 ] , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg [ 61 ] , Phenobarbitone Inj Ip 200Mg / Ml [ 420 ] , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml [ 474 ] , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml [ 479 ] , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg [ 661 ] , Clobazam Tablet / Capsule 5 Mg [ 662 ] , Clobazam Tablet / Capsule 10 Mg [ 663 ] , Levetiracetam Tablet Ip 500 Mg [ 664 ] , Levetiracetam Oral Solution / Suspension 100Mg / Ml [ 665 ] , Levetiracetam Injection 500Mg / 5Ml [ 666 ] , Gabapentine Tablet / Capsule 100Mg [ 667 ] , Gabapentine Tablet / Capsule 300Mg [ 668 ] , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg ) [ 701 ] , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) [ 702 ] , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) [ 703 ] , Acyclovir Oral Suspension Ip 400Mg / 5Ml [ 62 ] , Acyclovir Tab Ip 200 Mg [ 63 ] , Acyclovir Tab Ip 800 Mg [ 64 ] , Albendazole Oral Suspension Ip 400 Mg / 10Ml [ 65 ] , Albendazole Tablets Ip 400 Mg ( Detail In Rc ) [ 66A ] , Amikacin Inj Ip 100 Mg [ 67 ] , Amikacin Inj Ip 500 Mg [ 68 ] , Amoxycillin And Cloxacillin Cap 250 + 250 Mg [ 69 ] , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg [ 70 ] , Amoxycillin Cap Ip 250Mg [ 71 ] , Amoxycillin Cap Ip 500Mg [ 72 ] , Amoxycillin Dispersible Tablets Ip 125 Mg [ 73 ] , Ampicillin Injection Ip 500 Mg [ 75 ] , Azithromycin Tab 100 Mg Dispersible Tabs ( 3 Tab Strip 10X3x3 ) [ 78A ] , Azithromycin Tablets Ip 250Mg [ 79A ] , Azithromycin Tab Ip 500 Mg [ 80A ] , Benzathine Benzylpenicillin Inj Ip 12 Lac Units [ 81 ] , Benzathine Benzylpenicillin Inj Ip 6 Lac Units [ 82 ] , Cefixime Tab Ip 100 Mg [ 84 ] , Cefixime Tab Ip 200 Mg [ 85 ] , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) [ 86 ] , Cefotaxime Injection Ip 1 G [ 87 ] , Cefotaxime Inj Ip 250 Mg [ 88 ] , Ceftazidime Inj Ip 1G [ 89 ] , Ceftazidime Inj Ip 250 Mg [ 90 ] , Ceftazidime Inj Ip 500 Mg [ 91 ] , Ceftriaxone Inj Ip 1G / Vial [ 93 ] , Ceftriaxone Inj Ip 250 Mg / Vial [ 94 ] , Ceftriaxone Inj Ip 500Mg / Vial [ 95 ] , Cephalexin Cap Ip 250 Mg [ 96 ] , Cephalexin Cap Ip 500 Mg [ 97 ] , Chloroquine Phosphate Inj Ip 40 Mg / Ml [ 98 ] , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film Coated [ 99 ] , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml [ 100A ] , Ciprofloxacin Injection Ip 200Mg / 100Ml [ 101 ] , Ciprofloxacin Tablets Ip 250 Mg Film Coated [ 102 ] , Ciprofloxacin Tablet Ip 500 Mg Film Coated [ 103 ] , Clotrimazole Cream Ip 2% W / W [ 104 ] , Clotrimazole Vaginal Tab Ip 500Mg [ 105 ] , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg [ 107 ] , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg [ 108 ] , Diethylcarbamazine Tab Ip 100 Mg [ 110 ] , Doxycycline Cap Ip 100 Mg [ 111 ] , Fluconazole Tablets Ip 150Mg [ 114A ] , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) [ 116 ] , Griseofulvin Tab Ip 125 Mg [ 117 ] , Itraconazole Cap 100 Mg [ 118 ] , Meropenem Inj Ip 500 Mg [ 119 ] , Metronidazole Inj Ip 500 Mg / 100Ml [ 120 ] , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml [ 121 ] , Metronidazole Tablets Ip 200 Mg ( Film Coated ) [ 122 ] , Metronidazole Tablets Ip 400 Mg ( Film Coated ) [ 123 ] , Norfloxacin Tab Ip 400Mg Film Coated [ 124 ] , Ofloxacin Tab Ip 200 Mg [ 125 ] , Primaquine Tab Ip 2.5 Mg [ 128 ] , Primaquine Tab Ip 7.5 Mg [ 129 ] , Quinine Dihydrochloride Inj Ip 300 Mg / Ml [ 131 ] , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) [ 132 ] , Ampicillin Cap Ip 500Mg [ 412 ] , Nitrofurantoin Tab Ip 100Mg [ 413 ] , Cloxacillin Sodium Inj Ip 500Mg [ 417 ] , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml [ 427 ] , Ofloxacin Oral Suspension Ip 50Mg / 5Ml [ 428 ] , Tinidazole Tab Ip 300 Mg ( Film Coated ) [ 430 ] , Tinidazole Tab Ip 500 Mg ( Film Coated ) [ 431 ] , Piperacillin + Tazobactum For Injection Ip 4Gm+500Mg [ 468 ] , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml [ 473 ] , Cefpodoxime Dispersible Tab 50 Mg [ 475 ] , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) [ 476 ] , Meropenem Inj. Ip 1Gm [ 481 ] , Acyclovir Intravenous Infusion Ip 250Mg [ 502 ] , Acyclovir Intravenous Infusion Ip 500Mg [ 503 ] , Amikacin Inj Ip 250 Mg [ 504 ] , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg [ 505 ] , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm [ 506 ] , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) [ 507 ] , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) [ 508A ] , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) [ 511 ] , Cefuroxime Axetil Tab Ip 250 Mg [ 512 ] , Clindamycin Capsule Ip 150Mg [ 513 ] , Clindamycin Capsule Ip 300 Mg [ 514 ] , Levofloxacin Tablets Ip 250 Mg [ 515 ] , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg [ 520 ] , Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) [ 521 ] , Vancomycin For Intravenous Infusion Ip 500 Mg [ 523 ] , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) [ 651 ] , Co-Trimoxazole Tablet Ip ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) [ 669 ] , Framycetin Sulphate Cream 1 O / O 30Gm Pack [ 684 ] , Framycetin Sulphate Cream 1 O / O 100 Gm Pack [ 685 ] , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) [ 686 ] , Amoxycillin Tablet 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg [ 706 ] , Cefadroxil Dispersible Tablet 250 Mg ( Each Uncoated Dispersible Tablet Contain Cefadroxil Equivalent To Anhydrous Cefadroxil 250 Mg ) [ 709 ] , Cefadroxil Tablet 500 Mg [ 710 ] , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size [ 711 ] , Levofloxacin Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) [ 712 ] , Clindamycin Phosphate Injection Ip 300 Mg [ 714 ] , Terbinafine Hydrochloride Tablet 250 Mg [ 721 ] , Azathioprine Tab Ip 50 Mg [ 133 ] , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) [ 134 ] , Chlorambucil Tab Ip 5 Mg [ 136 ] , Cisplatin Inj Ip 50 Mg / 50 Ml [ 137 ] , Cyclophosphamide Inj Ip 200 Mg [ 138 ] , Cyclophosphamide Inj Ip 500 Mg [ 139 ] , Cytarabine Injection Bp 500Mg [ 141 ] , Danazol Cap Ip 50 Mg [ 142 ] , Daunorubicin Inj Ip 20 Mg [ 143 ] , Doxorubicin Inj Ip 50 Mg / 25 Ml [ 144 ] , Etoposide Inj Ip 100 Mg [ 146 ] , Fluorouracil Inj Ip 250 Mg / 5Ml [ 148 ] , L-Asparaginase Inj 10000 Iu [ 149 ] , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml [ 150 ] , Melphalan Tab Ip 5 Mg [ 151 ] , Mercaptopurine Tab Ip 50 Mg [ 152 ] , Methotrexate Inj Ip 50 Mg / 2 Ml [ 153 ] , Methotrexate Tab Ip 2.5 Mg [ 154 ] , Paclitaxel Inj Ip 260 Mg [ 155 ] , Paclitaxel Inj Ip 100 Mg [ 156 ] , Tamoxifen Tab Ip 10 Mg [ 157 ] , Vinblastine Inj Ip 10Mg / 10Ml [ 158 ] , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) [ 159 ] , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit [ 525 ] , Carboplatin Injection Ip 150 Mg [ 526 ] , Carboplatin Injection Ip 450 Mg [ 527 ] , Cisplatin Inj Ip 10 Mg / 10 Ml [ 528 ] , Dacarbazine Injection 500 Mg Usp / Bp [ 529 ] , Filgrastim Injection Ip ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcg [ 530 ] , Gemcitabine For Injection 200 Mg [ 531 ] , Gemcitabine For Injection Ip 1Gm [ 532 ] , Ifosfamide Injection Ip / Bp / Usp 1Gm [ 533 ] , Imatinib Tab Ip 400Mg [ 534 ] , Methotrexate Tablets Ip 10 Mg [ 536 ] , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg [ 537 ] , Oxaliplatin Injection Usp 50 Mg [ 538 ] , Cyclosporin Capsule Usp / Ip 50 Mg [ 677 ] , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) [ 727 ] , Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) [ 728 ] , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg ) [ 729 ] , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) [ 733 ] , Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) [ 741 ] , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) [ 742 ] , Zoledronic Acid Injection Ip 4Mg Vial [ 743 ] , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg [ 160 ] , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg [ 161 ] , Trihexyphenidyl Hcl Tab Ip 2 Mg [ 162 ] , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg [ 163 ] , Deferasirox Tab 100 Mg [ 165 ] , Deferasirox Tab 500 Mg [ 166 ] , Deferiprone Cap 250 Mg [ 167 ] , Deferiprone Cap 500 Mg [ 168 ] , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) [ 169 ] , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) [ 171 ] , Enoxaparin Sodium Inj Ip 60 Mg [ 172 ] , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) [ 173 ] , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) [ 174 ] , Human Albumin Solution Ip 20% [ 175 ] , Rh-Erythropoetin Inj Ip 2000Iu [ 177 ] , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) [ 180 ] , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion [ 405 ] , Factor Ix Concentrate ( Purified ) Ip 600 I.U. ( Human Coagulation Factor Ix ) [ 406 ] , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion [ 416 ] , Tranexamic Acid Tablets Ip 500 Mg [ 545 ] , Warfarin Sodium. Tab Ip 5Mg [ 546 ] , Vitamin K-1 ( Phytomenadione ) Ip 1Mg / 0.5Ml Injection ( Detail In Rc ) [ 644 ] , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial [ 688 ] , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial [ 689 ] , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size [ 744 ] , Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) [ 745 ] , Feracrylum 1% W / V Sterile Solution 100 Ml [ 746 ] , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size [ 747 ] , Amiodarone Tab Ip 100 Mg [ 181 ] , Amiodarone Tab Ip 200 Mg [ 182 ] , Amiodarone Hydrochloride Inj 50 Mg / Ml [ 183 ] , Amlodipine Tab Ip 2.5 Mg [ 184 ] , Amlodipine Tablets Ip 5 Mg [ 185 ] , Atenolol Tab Ip 50 Mg [ 186 ] , Atorvastatin Tab Ip 10Mg [ 187 ] , Clopidogrel Tab Ip 75 Mg [ 188 ] , Digoxin Inj Ip 0.25 Mg / Ml [ 189 ] , Digoxin Tab Ip 0.25 Mg. [ 190 ] , Diltiazem Tabs Ip 30 Mg Film Coated [ 191 ] , Dobutamine Inj Ip 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Ip 250 Mg / 5Ml ( Amp ) [ 192 ] , Dopamine Hydrochloride Inj Ip 40 Mg / Ml [ 193 ] , Enalapril Maleate Tab Ip 5Mg [ 194 ] , Enalapril Maleate Tab Ip 2.5Mg [ 195 ] , Isosorbide Dinitrate Tab Ip 5 Mg [ 197 ] , Isosorbide Mononitrate Tabs Ip 20 Mg [ 198 ] , Lisinopril Tab Ip 5 Mg [ 199 ] , Losartan Tab Ip 50 Mg [ 200 ] , Magnesium Sulphate Inj. Ip 500Mg / Ml ( 50%W / V ) [ 201 ] , Methyldopa Tab Ip 250Mg Film Coated [ 202 ] , Nifedipine Cap Ip 5Mg [ 203 ] , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) [ 204 ] , Nitroglycerin Inj 5 Mg / Ml [ 205 ] , Propranolol Tab Ip 40 Mg [ 207 ] , Streptokinase Injection 15 Lac Units Ip [ 209 ] , Verapamil Tab Ip 40 Mg Film Coated [ 211 ] , Labetalol Tab Ip 100Mg [ 410 ] , Labetalol Hcl Inj Ip 20Mg / 4Ml [ 411 ] , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab Ip ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) [ 444 ] , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) [ 457 ] , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) [ 458 ] , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) [ 459 ] , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg [ 460 ] , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) [ 461 ] , Atenolol Tab Ip 25 Mg [ 462 ] , Enalapril Maleate Tablets Ip 10 Mg [ 463 ] , Lisinopril Tablets Ip 10 Mg [ 465 ] , Lisinopril Tab Ip 2.5 Mg [ 466 ] , Losartan Tab Ip 25 Mg [ 467 ] , Adenosine Injection Ip 6 Mg / 2Ml [ 547 ] , Atorvastatin Tablets Ip 40 Mg [ 548 ] , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg [ 549 ] , Fenofibrate Capsules / Tab Ip 200 Mg [ 550 ] , Metoprolol Tablets Ip 25 Mg [ 552 ] , Metoprolol Succinate Extended Release Tablets Ip 50 Mg [ 553 ] , Noradrenaline Injection Ip 2 Mg / Ml [ 554 ] , Prazosin Tablets ( Extended Release ) 2.5 Mg [ 555 ] , Telmisartan Tablets Ip 40 Mg [ 556 ] , Urokinase Injection 5 Lac Unit ( Lyophilized ) [ 557 ] , Ramipril Tablets Ip 2.5 Mg [ 636 ] , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets [ 650 ] , Sotalol Hydrochloride Tablet Usp / Bp 40Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40Mg ) [ 752 ] , Carvedilol Tablet 3.125 Mg [ 755 ] , Chlorhexidine Mouthwash Ip 0.2 O / O [ 580 ] , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) [ 581 ] , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) [ 582 ] , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% [ 583 ] , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel [ 584 ] , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O [ 106 ] , Acyclovir Cream 5% [ 213 ] , Cetrimide Cream Ip 15 Gm [ 215A ] , Fusidic Acid Cream Ip 2% [ 216A ] , Glycerin Ip 400 Gm [ 217 ] , Liquid Paraffin Ip 400 Ml [ 218 ] , Miconazole Nitrate Cream Ip 2% [ 220 ] , Povidone Iodine Ointment 5% 15 Gm [ 221 ] , Neomycin Bacitracin And Sulphacetamide Powder ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) [ 223 ] , Silver Sulphadiazine Cream Ip 1% 50Gm Tube [ 224 ] , Gentian Violet Topical Solution Usp 1O / O [ 246 ] , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) [ 443 ] , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) [ 445 ] , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) [ 446 ] , Betamethasone Dipropionate Cream Ip 0.05% [ 558 ] , Betamethasone Lotion Ip 0.05 O / O [ 559 ] , Clindamycin Phosphate Gel Usp 1 O / O [ 560 ] , Clobetasol Propionate Cream Ip 0.05 O / O [ 561 ] , Glycerin Ip 100 Ml [ 564 ] , Ketoconazole Cream 2% [ 565 ] , Permethrin Lotion 5% [ 568 ] , Permethrin Cream 5% [ 569 ] , Tretenoin Cream Usp 0.025% [ 570 ] , Coal Tar 6% & Salicylic Acid 3% Ointment [ 670 ] , Calamine Lotion Ip 100Ml [ 671 ] , Powder Clotrimazole 1% W / W 30 Gm [ 759 ] , Terbinafine Cream 1%W / W ( 10 Gm Tube ) [ 760 ] , Oitment Mupirocin Ip 2% [ 762 ] , Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) [ 225 ] , Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) [ 226 ] , Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip [ 227 ] , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) [ 232 ] , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) [ 233 ] , Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit [ 242 ] , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml [ 482 ] , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. [ 672 ] , Multistix Test Strip [ 801 ] , Povidone Iodine Solution Ip 5 % 500 Ml [ 222 ] , Compound Benzoin Tincture Ip [ 244 ] , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) [ 245 ] , Gluteraldehyde Solution 2% [ 247 ] , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) [ 248 ] , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) [ 249 ] , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) [ 250 ] , Surgical Spirit Ip ( 500 Ml ) [ 252 ] , Chlorhexidine Gluconate Solution 5% 250 Ml [ 447 ] , Surgical Spirit Ip ( 100 Ml ) [ 449 ] , Povidone Iodine Solution Ip 5% 100Ml Bottle [ 450 ] , Povidone Iodine Ointment Usp 250 Gm [ 571 ] , Povidone Iodine Solution Ip 10 % [ 572 ] , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar [ 573 ] , Acetazolamide Tab Ip 250Mg [ 253 ] , Frusemide Tab Ip 40 Mg [ 254 ] , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) [ 255 ] , Hydrochlorthiazide Tab Ip 12.5 Mg [ 256 ] , Mannitol Inj Ip 20% W / V [ 257A ] , Spironolactone Tab Ip 25Mg [ 258 ] , Torsemide Tab 10 Ip Mg [ 259 ] , Hydrochlorthiazide Tab Ip 25Mg [ 464 ] , Torsemide Inj 10 Mg / Ml [ 471 ] , Spironolactone Tablets Ip 50 Mg [ 574 ] , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp [ 585 ] , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops [ 586 ] , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp [ 588 ] , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O [ 589 ] , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml [ 5 ] , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O [ 219 ] , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil [ 260A ] , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg [ 261A ] , Bisacodyl Tab Ip 5 Mg [ 262 ] , Dicyclomine Tab Ip 10 Mg [ 263 ] , Dicyclomine Inj Ip 10 Mg / Ml [ 264 ] , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml [ 265 ] , Domperidone Suspension Ip 5Mg / 5Ml [ 266 ] , Domperidone Tab Ip 10 Mg [ 267 ] , Hyoscine Butylbromide Inj Ip 20 Mg / Ml [ 268 ] , Loperamide Tab Ip 2 Mg [ 269 ] , Metoclopramide Inj Ip 10Mg / 2Ml [ 270 ] , Metoclopramide Tab Ip 10 Mg [ 271 ] , Omeprazole Cap Ip 20 Mg [ 272 ] , Ondansetron Inj Ip 2Mg / Ml [ 273 ] , Ors Powder Ip [ 274 ] , Pentoprazole Inj 40 Mg [ 275 ] , Ranitidine Hcl Injection Ip 50Mg / 2Ml [ 276 ] , Ranitidine Tab Ip 150Mg Film Coated [ 277 ] , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O [ 278 ] , Hyoscine Butyl Bromide Tablets Ip 10Mg [ 414 ] , Drotaverine Tab Ip 40 Mg [ 415 ] , Ranitidine Tab Ip 300Mg Film Coated [ 433 ] , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg [ 438 ] , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets [ 439A ] , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml [ 478 ] , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) [ 590 ] , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg [ 591 ] , Lactic Acid Bacillus Tab 60 Million Spores [ 592 ] , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml [ 593 ] , Liquid Paraffin Ip 100 Ml [ 594 ] , Ondansetron Orally Disintegrating Tablets Ip 4Mg [ 595 ] , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Ip Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets [ 596 ] , Ursodeoxycholic Acid Tablets Ip 300 Mg [ 597 ] , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) [ 763 ] , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size [ 764 ] , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) [ 765 ] , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) [ 766 ] , Allopurinol Tablets Ip 100 Mg [ 598 ] , Hydroxychloroquine Sulphate Tablets 200Mg [ 599 ] , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) [ 279 ] , Carbimazole Tabs Ip 5 Mg ( Film Coated ) [ 280 ] , Carboprost Tromethamine Injection Ip Each Ml Contains Carboprost 0.25 Mg / Ml [ 281 ] , Clomifene Tab Ip 25 Mg [ 282 ] , Clomiphene Tab Ip 50 Mg [ 283 ] , Conjugated Estrogen Tabs Usp 0.625 Mg. [ 284 ] , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe [ 285 ] , Ethinyloestradiol Tabs Ip 50 Mcg [ 286 ] , Glibenclamide Tab Ip 5 Mg [ 287 ] , Gliclazide Tab Ip 40 Mg [ 288 ] , Glimepiride Tab Ip 2 Mg [ 289 ] , Glimepiride Tab Ip 1Mg [ 290 ] , Glipizide Tab Ip 5Mg [ 291 ] , Hydroxyprogesterone Inj Ip 250Mg / Ml [ 293 ] , Isophane Insulin Inj Ip 40 Iu / Ml [ 294 ] , Metformin Tab Ip 500 Mg ( Film Coated ) [ 295 ] , Norethisterone Tab Ip 5 Mg [ 296 ] , Pioglitazone Tab Ip 15 Mg [ 297 ] , Progesterone Inj 200 Mg / 2Ml [ 298 ] , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) [ 300 ] , Thyroxine Sodium Tablets Ip 100Mcg [ 301 ] , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg [ 451 ] , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) [ 452 ] , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) [ 453 ] , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg [ 454 ] , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets Ip ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) [ 455 ] , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg [ 456 ] , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 Mg ) [ 603 ] , Medroxyprogesterone Acetate Tablets Ip 10 Mg [ 605 ] , Thyroxine Tablets Ip 50 Mcg [ 607 ] , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges [ 680 ] , Tenaligliptin Tablet Ip 20Mg [ 682 ] , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle [ 693 ] , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) [ 303 ] , Human Anti D Immunoglobulin 150 Mcg [ 304 ] , Human Rabies Immunoglobulin Inj 150 Iu / Ml [ 305 ] , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu [ 306 ] , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose [ 307 ] , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) [ 308 ] , Tetanus Immunoglobulin Ip 250 Iu / Vial [ 309 ] , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial [ 310 ] , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) [ 408 ] , Diphtheria Antitoxin 10000 Iu [ 480 ] , Hepatitis B Immunologlobin Injection Ip 200 I.U [ 767 ] , Atracurium Inj 10 Mg / Ml [ 311 ] , Glycopyrrolate Inj Ip 0.2 Mg / Ml [ 312 ] , Midazolam Inj Ip 1 Mg / Ml [ 313 ] , Neostigmine Inj Ip 0.5 Mg / Ml [ 314 ] , Neostigmine Tab Ip 15 Mg [ 316 ] , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) [ 317 ] , Valethamate Bromide Inj 8Mg / Ml [ 318 ] , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) [ 419 ] , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) [ 610 ] , Neostigmine Injection Ip 2.5Mg / 5Ml [ 638 ] , Tropicamide Eye Drop Ip 1O / O [ 241 ] , Atropine Eye Ointment Ip 1% [ 319 ] , Atropine Sulphate Ophthalmic Solution Usp 1% [ 320 ] , Chloramphenicol Eye Drops Ip 0.5 0 / 0 [ 321 ] , Ciprofloxacin Eye Drops Ip 0.3 O / O W / V [ 322 ] , Ciprofloxacin Ophthalmic Ointment Usp 0.3% [ 323 ] , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml [ 324 ] , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O [ 330 ] , Tobramycin Eye Drops 0.3% [ 331 ] [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% [ 332 ] , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V [ 421 ] , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. [ 423 ] , Lidocaine Hcl Topical Solution Usp 4% [ 424 ] , Fluconazole Eye Drops 0.3% [ 425 ] , Timolol Eye Drops Ip 0.5 O / O W / V [ 484 ] , Homatropine Eye Drops Ip 2% [ 485 ] , Travoprost Eye Drops Ip 0.004 O / O [ 486 ] , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% [ 487 ] , Carboxymethylcellulose Eye Drops Ip 0.5% [ 613 ] , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% [ 614 ] , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size [ 769 ] , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size [ 770 ] , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size [ 771 ] , Isoxsuprine Inj Ip 5 Mg / Ml [ 333 ] , Isoxsuprine Tab Ip 20 Mg [ 334 ] , Methylergometrine Inj Ip 0.2 Mg / Ml [ 335 ] , Methylergometrine Tab Ip 0.125 Mg [ 336 ] , Misoprostol Tab Ip 200 Mcg [ 337 ] , Oxytocin Inj Ip 5 Iu / Ml [ 338 ] , Mifepristone Tab Ip 200Mg [ 615 ] , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) / Natural Micronised Progesteron Tablet 200 Mg ( Each Tablet Contains Progesteron Ip 200 Mg ) [ 772 ] , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) [ 773 ] , Human Chorionic Gonadotropin Injection Ip 5000 I.U. [ 774 ] , Alprazolam Tab Ip 0.25 Mg [ 339 ] , Alprazolam Tab Ip 0.5Mg [ 340 ] , Amitriptyline Tab Ip 25Mg Film Coated [ 341 ] , Chlordiazepoxide Tablets Ip 10Mg [ 342 ] , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) [ 343 ] , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) [ 344 ] , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) [ 345 ] , Chlorpromazine Inj. Ip 25Mg / Ml [ 346 ] , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) [ 349 ] , Diazepam Tab Ip 5 Mg [ 350 ] , Escitalopram Tab Ip 10 Mg [ 351 ] , Fluoxetine Cap Ip 20 Mg [ 352 ] , Haloperidol Inj Ip 5 Mg / Ml [ 353 ] , Haloperidol Tab Ip 1.5 Mg [ 354 ] , Haloperidol Tab Ip 5 Mg [ 355 ] , Imipramine Tab Ip 25 Mg ( Coated Tab ) [ 356 ] , Imipramine Tab Ip 75 Mg ( Coated ) [ 357 ] , Lithium Carbonate Tab Ip 300 Mg [ 358 ] , Lorazepam Inj Ip 2 Mg / Ml [ 359 ] , Olanzapine Tab Ip 5 Mg [ 360 ] , Risperidone Tab 2Mg [ 361 ] , Risperidone Tab 1 Mg [ 362 ] , Sertraline Tab Ip 50 Mg [ 363 ] , Trifluperazine Tab Ip 5 Mg Coated [ 364 ] , Clonazepam Tablet 0.5 Mg [ 678 ] , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) [ 777 ] , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) [ 778 ] , Zolpidem Tablet 5 Mg [ 779 ] , Aminophylline Inj Ip 25 Mg / Ml [ 365 ] , Beclomethasone Inhalation Ip 200 Mcg / Dose [ 366 ] , Budesonide Nebulizer Suspension 0.25Mg / Ml [ 367 ] , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S. [ 368 ] , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml [ 369 ] , Salbutamol Tablet Ip 4 Mg [ 370 ] , Salbutamol Inhalation 100 Mcg / Dose [ 371 ] , Salbutamol Nebuliser Solution Bp 5 Mg / Ml [ 372 ] , Salbutamol Tab Ip 2 Mg [ 373 ] , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) [ 374 ] , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) [ 375 ] , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) [ 376 ] , Salbutamol Syrup Ip 2Mg / 5Ml [ 432 ] , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml [ 440 ] , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) [ 442 ] , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg [ 616 ] , Budesonide Powder For Inhalation 200 Mcg [ 617 ] , Ipratropium Powder For Inhalation Ip 40 Mcg [ 618 ] , Terbutaline Tablets Ip 2.5 Mg [ 619 ] , Xylometazoline Nasal Drops Ip 0.1% [ 620 ] , Cough Syrup / Expectorant ( 50 ) Ml [ 692 ] , Acebrophylline Tablet / Capsule 100 Mg [ 780 ] , Compound Sodium Lactate Inj. Ip [ 377 ] , Dextrose Inj Ip 25% W / V [ 378 ] , Dextrose Inj Ip 10% [ 379 ] , Dextrose Inj Ip 5% [ 380 ] , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection ) [ 381 ] , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) [ 382 ] , Potassium Chloride Inj. 0.15 Gm / Ml [ 383 ] , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml [ 384 ] , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O [ 385 ] , Sodium Chloride Inj Ip 500 Ml [ 386 ] , Sodium Chloride Injection Ip 100 Ml [ 621 ] , Ringer Acetate Infusion 500 Ml [ 781 ] , Sodium Chloride 0.45% W / V Polypack 500 Ml [ 782 ] , Tamsulosin Hcl Tablets / Capsule 0.4 Mg [ 576 ] , Flavoxate Tablets Ip 200 Mg ( Coated Tablet ) [ 579 ] , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) [ 784 ] , Phenazopyridine Tablet 5 Mg [ 786 ] , Dutasteride Tablet 0.5 Mg [ 787 ] , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) [ 788 ] , Betahistine Tab Ip 8 Mg [ 541 ] , Betahistine Tab Ip 16 Mg [ 542 ] , Cinnarizine Tablets Ip 25 Mg [ 543 ] , Cinnarizine Tablet Ip 75 Mg [ 544 ] , Ascorbic Acid Tab Ip 500 Mg [ 387 ] , Calcium Gluconate Inj Ip 10% ( Iv Use ) [ 388 ] , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg [ 390 ] , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg [ 391 ] , Folic Acid Tab Ip 5 Mg [ 392 ] , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg [ 393 ] , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg [ 394 ] , Vitamin B Complex Inj Nfi [ 395 ] , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) [ 397 ] , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu [ 409 ] , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) [ 441 ] , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg [ 448 ] , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg [ 472 ] , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg [ 488 ] , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) [ 622 ] , Cholecalciferol Granules 60, 000 Iu / Gm [ 623 ] , Mecobalamin Inj 500 Mcg / Ml [ 624 ] , Pyridoxine Tablet Ip 10 Mg [ 626 ] , Pyridoxine Tablet Ip 40Mg [ 627 ] , Thiamine Tablets Ip 100 Mg [ 629 ] , Calcitriol Capsules Ip 0.25 Mcg [ 630 ] , Methyl Cobalmine Tablet 500Mcg [ 652 ] , Methyl Cobalmine Tablet 1500Mcg [ 653 ] , Vitamin D3 Oral Solution 60000 Iu [ 676 ] , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size [ 789 ] , Multi Vitamin Syrup [ 790 ] , Flunarizine Tab 5 Mg [ 147 ] , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii [ 398 ] , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can [ 399 ] , Peritonial Dialysis Solution Ip [ 401 ] , Sodium Bicarbonate Inj Ip 7.5% W / V [ 402 ] , Water For Inj Ip [ 404 ] , Pregabalin Cap Ip 75 Mg [ 634 ] , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) [ 635 ] , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans [ 687 ] , Pyridostigmine Tablet Ip 60 Mg ( Each Tablet Contains Pyridostigmine Ip 60 Mg ) [ 792 ] , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size [ 793 ] , Vitamin E Capsule 400 Mg [ 795 ] , Inj Poractant Alpha 80 Mg / Ml In Pack Of 1.5 Ml ( Detail In Rc ) [ 796 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 [ R1 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 [ R2 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 [ R3 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 [ R4 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 [ R5 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 [ R6 ] , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 [ R7 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm [ R9 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm [ R10 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm [ R11 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm [ R13 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm [ R16 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) [ R17 ] , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 ( Details In Rc ) [ R76 ] , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 ( Details In Rc ) [ R77 ] , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 ( Details In Rc ) [ R80 ] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) [ R20 ] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) [ R21 ] , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) [ R22 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) [ R23 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) [ R27 ] , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) [ R28 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) [ R32 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) [ R33 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) [ R34 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) [ R44 ] , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) [ R45 ] , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 ( Details In Rc ) [ R78 ] , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) [ R64 ] , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) [ R67 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm [ R68 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm [ R69 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm [ R70 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm [ R71 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm [ R72 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm [ R73 ] , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm [ R74 ] , Absorbable Gelatin Sponge 80 X 50X 10Mm ( Details In Rc ) [ S1 ] , Absorbent Cotton Wool Ip 500 Gm [ S2 ] , Asepto Syringe With Transparent Bulb Sterile, 60 Ml [ S3 ] , Blood Administration Set Blood Transfusion Set ( Details In Rc ) [ S4 ] , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S5.A ] , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S5.B ] , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S6.A ] , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S6.B ] , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) ( Details In Rc ) [ S7.A ] , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) ( Details In Rc ) [ S7.B ] , Suction Catheter, Sterile.Size: Fg 5 ( Details In Rc ) [ S8.A ] , Suction Catheter, Sterile. Size: F G-6 ( Details In Rc ) [ S8.B ] , Suction Catheter, Sterile. Size: F G-8 ( Details In Rc ) [ S8.C ] , Suction Catheter, Sterile. Size: F G-10 ( Details In Rc ) [ S8.D ] , Suction Catheter, Sterile. Size: F G-12 ( Details In Rc ) [ S8.E ] , Suction Catheter, Sterile. Size: F G-14 ( Details In Rc ) [ S8.F ] , Suction Catheter, Sterile. Size: F G-16 ( Details In Rc ) [ S8.G ] , Suction Catheter, Sterile. Size: F G-18 ( Details In Rc ) [ S8.H ] , Suction Catheter, Sterile. Size: F G-20 ( Details In Rc ) [ S8.I ] , Suction Catheter, Sterile. Size: F G-22 ( Details In Rc ) [ S8.J ] , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.A ] , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.B ] , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.C ] , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.D ] , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.E ] , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.F ] , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material ( Details In Rc ) [ S9.G ] , Infant Feeding Tube Size 10Fg ( Details In Rc ) [ S10.A ] , Infant Feeding Tube Size 8Fg ( Details In Rc ) [ S10.B ] , Infant Feeding Tube Size 5Fg ( Details In Rc ) [ S10.C ] , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable ( Details In Rc ) [ S11 ] , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable ( Details In Rc ) [ S12 ] , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable ( Details In Rc ) [ S13 ] , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 [ S14 ] , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G ( Details In Rc ) [ S15.A ] , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G ( Details In Rc ) [ S15.B ] , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G ( Details In Rc ) [ S15.C ] , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G ( Details In Rc ) [ S15.D ] , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G ( Details In Rc ) [ S15.E ] , Mucus Extractor Sterile ( Details In Rc ) [ S16 ] , Nasal Oxygen Set, Twin Bore All Sizes Adult ( Details In Rc ) [ S17.A ] , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics ( Details In Rc ) [ S17.B ] , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape [ S18 ] , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape [ S19 ] , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape [ S20 ] , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll [ S21 ] , Plaster Of Paris Bandage 10Cm X 2.7Mts [ S22 ] , Ryles Tube / Nasogastric Tube Size: 10 ( Details In Rc ) [ S23.A ] , Ryles Tube / Nasogastric Tube Size: 12 ( Details In Rc ) [ S23.B ] , Ryles Tube / Nasogastric Tube Size:14 ( Details In Rc ) [ S24.A ] , Ryles Tube / Nasogastric Tube Size: 16 ( Details In Rc ) [ S24.B ] , Ryles Tube / Nasogastric Tube Size: 18 ( Details In Rc ) [ S24.C ] , Scalp Vein Set ( Disposable ) Size 18G ( Details In Rc ) [ S25.A ] , Scalp Vein Set ( Disposable ) Size 20G ( Details In Rc ) [ S25.B ] , Scalp Vein Set ( Disposable ) Size 22G ( Details In Rc ) [ S25.C ] , Scalp Vein Set ( Disposable ) Size 24 G ( Details In Rc ) [ S25.D ] , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) [ S26 ] , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable ( Details In Rc ) [ S27 ] , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) [ S28 ] , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable ( Details In Rc ) [ S29 ] , Surgical Blade Sterile, Size 11 ( Details In Rc ) [ S30.A ] , Surgical Blade Sterile, Size 15 ( Details In Rc ) [ S30.B ] , Surgical Blade Sterile, Size 22 ( Details In Rc ) [ S30.C ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 ( Details In Rc ) [ S31 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 ( Details In Rc ) [ S32 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 ( Details In Rc ) [ S33 ] , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 ( Details In Rc ) [ S34 ] , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 ( Details In Rc ) [ S35 ] , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 ( Details In Rc ) [ S36 ] , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 ( Details In Rc ) [ S37 ] , Suture Needles Curved And Cutting Size 1-5 ( Details In Rc ) [ S38 ] , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch ( Details In Rc ) [ S39.A ] , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch ( Details In Rc ) [ S39.B ] , Urine Collecting Bag, Disposable 2000 Ml ( Details In Rc ) [ S40 ] , Endotracheal Tube, Plain - Size 2.5 ( Details In Rc ) [ S43.A ] , Endotracheal Tube, Plain - Size 3 ( Details In Rc ) [ S43.B ] , Endotracheal Tube, Plain - Size 3.5 ( Details In Rc ) [ S43.C ] , Endotracheal Tube, Plain - Size 4 ( Details In Rc ) [ S43.D ] , Endotracheal Tube, Plain - Size 4.5 ( Details In Rc ) [ S43.E ] , Endotracheal Tube, Plain - Size 5 ( Details In Rc ) [ S43.F ] , Endotracheal Tube, Plain - Size 5.5 ( Details In Rc ) [ S43.G ] , Endotracheal Tube, Plain - Size 6 ( Details In Rc ) [ S43.H ] , Endotracheal Tube, Plain -Size 6.5 ( Details In Rc ) [ S43.I ] , Endotracheal Tube, Plain - Size 7 ( Details In Rc ) [ S43.J ] , Endotracheal Tube, Plain - Size 7.5 ( Details In Rc ) [ S43.K ] , Endotracheal Tube, Plain - Size 8 ( Details In Rc ) [ S43.L ] , Endotracheal Tube, Plain - Size 8.5 ( Details In Rc ) [ S43.M ] , Endotracheal Tube, Cuffed - Size 4 ( Details In Rc ) [ S44.A ] , Endotracheal Tube, Cuff - Size 4.5 ( Details In Rc ) [ S44.B ] , Endotracheal Tube, Cuff - Size 5 Details In Rc [ S44.C ] , Endotracheal Tube, Cuff - Size 6 ( Details In Rc ) [ S44.D ] , Endotracheal Tube, Cuff- Size 6.5 ( Details In Rc ) [ S44.E ] , Endotracheal Tube, Cuff - Size 7 ( Details In Rc ) [ S44.F ] , Endotracheal Tube, Cuff - Size 7.5 ( Details In Rc ) [ S44.G ] , Endotracheal Tube, Cuff - Size 8 ( Details In Rc ) [ S44.H ] , Endotracheal Tube, Cuff - Size 8.5 ( Details In Rc ) [ S44.I ] , Endotracheal Tube, Cuff - Size 9 ( Details In Rc ) [ S44.J ] , Tracheostomy Tube, Plain - All Sizes ( Details In Rc ) [ S45 ] , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes ( Details In Rc ) [ S46 ] , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 ( Details In Rc ) [ S47.A ] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 ( Details In Rc ) [ S47.B ] , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 ( Details In Rc ) [ S47.C ] , Corrugated Drainage Sheet - All Sizes ( Details In Rc ) [ S48 ] , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm [ S73 ] , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm [ S74 ] , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm ( Details In Rc ) [ S79 ] , Bone Wax Sterilised [ S80 ] , Skin Graft Knife Blade ( Sterile ) ( Details In Rc ) [ S82 ] , K Wire, Length 375 Mm; 1Mm ( Details In Rc ) [ S84.A ] , K Wire, Length 375 Mm; 1.6Mm ( Details In Rc ) [ S84.B ] , K Wire, Length 375 Mm; 1.8Mm ( Details In Rc ) [ S84.C ] , Face Mask, Disposable ( Details In Rc ) [ S85 ] , Surgical Cap Disposable ( For Surgeons ) ( Details In Rc ) [ S86.A ] , Surgical Cap, Disposable ( For Nurses ) ( Details In Rc ) ( Details In Rc ) [ S86.B ] , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 11 To 17.5 [ S87.A ] , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 18 To 24 [ S87.B ] , Foldable Intra Ocular Lense With Injector ( Details In Rc ) 24.5 To 28.5 [ S87.C ] , Standard Pama Intra Ocular Lenses ( Details In Rc ) 11 To 17.5 [ S88.A ] , Standard Pama Intra Ocular Lenses ( Details In Rc ) 18 To 24 [ S88.B ] , Standard Pama Intra Ocular Lenses ( Details In Rc ) 24.5 To 28.5 [ S88.C ] , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered [ S89.A ] , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free [ S89.B ] , Rubber Examination Gloves, Non-Sterile, Extra Small ( Details In Rc ) [ S90.A ] , Rubber Examination Gloves, Size Small ( Details In Rc ) [ S90.B ] , Rubber Examination Gloves, Size Medium ( Details In Rc ) [ S90.C ] , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large ( Details In Rc ) [ S90.D ] , Pressure Monitoring Line / High Pressure Extension Line ( Details In Rc ) [ S91 ] , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml ( Details In Rc ) [ S92 ] , Umbilical Catheter For New Born, All Sizes - ( Details In Rc ) [ S93 ] , Umbilical Cord Clamp ( Details In Rc ) [ S94 ] , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property ( Details In Rc ) [ S95 ] , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 ( Details In Rc ) [ S96.A ] , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 ( Details In Rc ) [ S96.B ] , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- ( Details In Rc ) [ S97 ] , Bone Cement [ S98 ] , Sanitary Napkin Beltless ( Details In Rc ) [ S99.A ] , Sanitary Pads Belt Type ( Details In Rc ) [ S99.B ] , Sanitary Napkin Beltless With Wings ( Details In Rc ) [ S99.P ] , Oxygen Mask ( Adult ) [ S100 ] , Oxygen Mask ( Pediatric ) [ S101 ] , Foleys Catheter No. 14 ( Detail In Rc ) [ S102 ] , Nelaton Catheter Size 14 Fg ( Detail In Rc ) [ S103 ] , Ecg Electrode ( Detail In Rc ) [ S104 ] , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is 3319 ( Detail In Rc ) [ S105 ] , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml ( Detail In Rc ) [ S106 ] , Urethral Catheter 90 ( Fg-14 ) Made Up Of Medical Grade Pvc ( Detail In Rc ) [ S107 ] , Urethral Catheter 91 ( Fg-10 ) , Made Up Of Medical Grade Pvc ( Detail In Rc ) [ S108 ] , Vaccum Suction Set, 2.5 Meter Length ( Detail In Rc ) [ S109 ] , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements ( Detail In Rc ) [ S119 ] , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 10Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) [ S120 ] , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 50Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) [ S121 ] , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 100Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) [ S122 ] , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 150Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) [ S123 ] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) ( Detail In Rc ) [ S124 ] , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) ( Detail In Rc ) [ S125 ] , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) [ S126 ] , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) [ S127 ] , Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G ( Detail In Rc ) [ S128 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Ventilator Without Vent ( Detail In Rc ) [ S129 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc ) [ S130 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent ( Detail In Rc ) [ S131 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Bipap With Vent ( Detail In Rc ) [ S132 ] , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support ( Detail In Rc ) [ S133 ] , Nebulization Mask Adult ( Detail In Rc ) [ S134 ] , Nebulization Mask Paediatric ( Detail In Rc ) [ S135 ] , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) [ 639 ] , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) [ 640 ] , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) [ 641 ] , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) [ 642 ] , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) [ 642A ] , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) [ 645 ] , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) [ 646 ] , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) [ 647 ] , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) [ 648 ] , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg [ 649 ] , Liposomol Amphotericine Injection B 50Mg [ 800 ] , Drug Name :: Alpha And Lipoic Acid And Leycopen And Multivitamin And Miltiminerals Capsule [ Nrd.3 ] , Drug Name :: Alpha Beta Arteether 2 Ml Injection [ Nrd.150 ] , Drug Name :: Anticold Drop [ Nrd.78 ] , Drug Name :: Anti-Oxidants Capsule ( Beta Carotene-10 Mg, Vit-E 25Mg, Vit-C 100 Mg, Copper 1.5 Mg, Managanese 1.5 Mg, Z [ Nrd.11 ] , Drug Name :: Aprepitant Capsule 125Mg [ Nrd.12 ] , Drug Name :: Azithromycin 10 Ml Vial Equaivelent To 500 Mg Injection [ Nrd.161 ] , Drug Name :: Azithromycin Oral Suspension 100Mg / 5Ml Syrup [ Nrd.525 ] , Drug Name :: Azithromycin Oral Suspension 200Mg / 5Ml Syrup [ Nrd.526 ] , Drug Name :: Carboxymethylcellulose And Glycerin Eye Drop [ Nrd.92 ] , Drug Name :: Cefpodoxime Proxetil Tablet 100Mg [ Nrd.571 ] , Drug Name :: Chloramphenicol And Polymycin Eye Ointment [ Nrd.122 ] , Drug Name :: Chloramphenicol And Polymycine And Dexamethasone Eye Ointment [ Nrd.123 ] , Drug Name :: Clarithromycin Tablet 500Mg [ Nrd.581 ] , Drug Name :: Compound Sodium Lactate ( Ringer Lactate ) In Glass Bottle 500Ml Injection [ Nrd.197 ] , Drug Name :: Cyproheptadine 200Ml Syrup [ Nrd.491 ] , Drug Name :: Dapagliflozin Tablet 10Mg [ Nrd.599 ] , Drug Name :: Deflazacort Tablet 6Mg [ Nrd.602 ] , Drug Name :: Dexmedetomidine 100Mcg / Ml [ Nrd.215 ] , Drug Name :: Diastase Pepsin With Simethicone 15 Ml Drop [ Nrd.71 ] , Drug Name :: Dorzolamide 2% Eye Drop [ Nrd.101 ] , Drug Name :: Doxycycline For Injection 100 Mg Injection [ Nrd.221 ] , Drug Name :: Drotavarine Syrup [ Nrd.494 ] , Drug Name :: Duloxetine Gastro Resistant Tablet 20Mg [ Nrd.614 ] , Drug Name :: Duloxitine Gastro Resistant Tablet 30Mg [ Nrd.615 ] , Drug Name :: Enzyme Drop [ Nrd.80 ] , Drug Name :: Esomeprazole Tablet 40Mg [ Nrd.624 ] , Drug Name :: Etomidate 20 Mg Injection [ Nrd.231 ] , Drug Name :: Febuxostat Tablet 40Mg [ Nrd.632 ] , Drug Name :: Febuxostat Tablet 80Mg [ Nrd.633 ] , Drug Name :: Fluconazole 200 Mg Injection [ Nrd.236 ] , Drug Name :: Formaline Tablet [ Nrd.642 ] , Drug Name :: Gatifloxacin And Prednisolone Eye Drop [ Nrd.103 ] , Drug Name :: Gdw 5% Glass Bottle / 500Ml Injection [ Nrd.247 ] , Drug Name :: Glucosamine And Hydrochloride And Methylsulfonylmethane Capsule [ Nrd.4 ] , Drug Name :: Glucosamine Hydrocloride Tablet And Diacerin 50 Tablet Mg [ Nrd.644 ] , Drug Name :: Hydroxyzine Oral Solution 15 Ml Drop [ Nrd.76 ] , Drug Name :: Ivermectin Tablet 12Mg [ Nrd.651 ] , Drug Name :: Ivermectin Tablet 6Mg [ Nrd.650 ] , Drug Name :: Levofloxacin Oral Solution Syrup [ Nrd.503 ] , Drug Name :: Levofloxacine 500Mg / 100 Ml Injection [ Nrd.273 ] , Drug Name :: Levothyroxine Sodium Tablet 25Mcg [ Nrd.665 ] , Drug Name :: Lignocaine 1% Mouth Paint [ Nrd.427 ] , Drug Name :: L-Orinithine L- Aspartate 10 Ml Injection [ Nrd.283 ] , Drug Name :: Luliconazole 1% Cream [ Nrd.55 ] , Drug Name :: Mefenamice Acid 100Mg / 5Ml Syrup [ Nrd.505 ] , Drug Name :: Mephentermine 50Mg / Ml Injection [ Nrd.285 ] , Drug Name :: Methylprednisolon Acetate 40Mg Injection [ Nrd.291 ] , Drug Name :: Methylprednisolone Tablet 16Mg [ Nrd.683 ] , Drug Name :: Methylprednisolone Tablet 8Mg [ Nrd.684 ] , Drug Name :: Montelucast And Levocetrizine Syrup [ Nrd.508 ] , Drug Name :: Moxifloxacin And Difluoprednate Eye Drop [ Nrd.93 ] , Drug Name :: Moxifloxacin And Prednisolone Eye Drop [ Nrd.109 ] , Drug Name :: Moxifloxacin Tablet 400Mg [ Nrd.697 ] , Drug Name :: Moxifloxin 400Mg / 100Ml Injection [ Nrd.301 ] , Drug Name :: Multivitamin 10 Ml Injection [ Nrd.302 ] , Drug Name :: Nandrolone Decanoate 50 Mg Injection [ Nrd.305 ] , Drug Name :: Natamycin Opthalmic Suspension 5% Eye Drop [ Nrd.94 ] , Drug Name :: Nicoumalone Tablet 1Mg [ Nrd.705 ] , Drug Name :: Nicoumalone Tablet 4Mg [ Nrd.707 ] , Drug Name :: Nitrazepam Tablet 5Mg [ Nrd.714 ] , Drug Name :: Normal Saline 500 Ml Glass Bottle Injection [ Nrd.315 ] , Drug Name :: Olaptadine & Ketorolac Eye Drop [ Nrd.95 ] , Drug Name :: Ondansetron Oral Solution 30 Ml Drop [ Nrd.73 ] , Drug Name :: Ondansetron Oral Suspension Syrup [ Nrd.510 ] , Drug Name :: Paracetomol Tablet 650Mg [ Nrd.726 ] , Drug Name :: Phenobarbitone 20Mg / 5Ml In 100Ml Syrup [ Nrd.512 ] , Drug Name :: Pilocarpine 0.5% W / V Injection [ Nrd.334 ] , Drug Name :: Piracetam 200Mg Injection [ Nrd.336 ] , Drug Name :: Polymyxin B 10000Iu / Gm And Neomycin 3400Iu / Gm Eye Drop [ Nrd.96 ] , Drug Name :: Prednisolone Acetate Opthalmic Suspension 10 Ml Eye Drop [ Nrd.74 ] , Drug Name :: Propylthiouracil Tablet 100Mg [ Nrd.753 ] , Drug Name :: Rabeprazole And Levosulpiride Capsule [ Nrd.6 ] , Drug Name :: Racecadotril Capsule 100Mg [ Nrd.5 ] , Drug Name :: Reteplase 18 Mg Injection [ Nrd.352 ] , Drug Name :: Rosuvastatin Tablet 10Mg And Fenofibrate Tablet 160Mg [ Nrd.771 ] , Drug Name :: Serratiopeptidase Tablet 10Mg [ Nrd.777 ] , Drug Name :: Silodosin Capsule 4Mg [ Nrd.35 ] , Drug Name :: Silodosin Capsule 8Mg [ Nrd.36 ] , Drug Name :: Sodium Chloride 5 % Eye Drop [ Nrd.115 ] , Drug Name :: Terbutalin Drop [ Nrd.75 ] , Drug Name :: Tetanus Vaccine ( Adsorbed ) Injection Ip In 0.5 Ml [ Nrd.824 ] , Drug Name :: Tropicamide And Phenylepherine Eye Drop [ Nrd.118 ] , Drug Name :: Trypsin Chymotripsin Tablet [ Nrd.807 ] , Drug Name :: Vildagliptin Tablet 50Mg [ Nrd.812 ] , Drug Name :: Vitamin D ( 600000 Iu ) Injection [ Nrd.402 ] , Drug Name :: Vitamin D3 400Iu / Ml Drop [ Nrd.84 ] , Drug Name :: Vitamin D3 800Iu / Ml Drop [ Nrd.85 ] , Drug Name :: Voglibose Tablet 0.2Mg [ Nrd.813 ] , Drug Name :: Voglibose Tablet 0.3Mg [ Nrd.814 ] , Drug Name :: Zinc Oral Suspension 20 Mg / 100 Ml Syrup [ Nrd.524 ] , Drug Name :: Zinc Tablet 50Mg [ Nrd.818 ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
20.
Health and Family Welfare #8880657 Technical Bid
SUPPLY OF Medicine And Surgical Equipment For Mg Hospital Banswara Aceclofenac And Paracetamol Tablets Aceclofenace 100 Mg And Paracetamol 325 Mg, Acenocoumarol Tab Ip / Nicoumalone Tab, Acetazolamide Tab, Acetylcyltine Solution Usp ( Injection ) , Act Kit Containing 3 Tables Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine Etc, For Mg Hospital 1 Medicine and surgical equipment : 2 Aceclofenac and Paracetamol Tablets Aceclofenac 100 mg and Paracetamol 325 mg 3 Acenocoumarol Tab IP/ Nicoumalone Tab IP 2 mg 4 Acetazolamide Tab IP 250mg 5 Acetylcystine Solution USP (Injection) 200 mg/ml 6 ACT Kit Containing 3 tablets of Artesunate(100 mg each) and 1 tablet of Sulphadoxine and Pyrimethamine(750mg+37.5mg) 7 ACT Kit Containing 3 tablets of Artesunate(150 mg each) and 2 tablet of Sulphadoxine and Pyrimethamine(500mg+25mg) 8 ACT Kit Containing 3 tablets of Artesunate(25mg each) and 1 tablet of Sulphadoxine and Pyrimethamine(250mg+12.5mg) 9 ACT Kit Containing 3 tablets of Artesunate(50 mg each) and 1 tablet of Sulphadoxine and Pyrimethamine(500mg+25mg) 10 Acyclovir Cream 5% 11 Acyclovir Intravenous Infusion IP 250mg 12 Acyclovir Intravenous Infusion IP 500mg 13 Acyclovir Oral Suspension IP 400mg/5ml 14 Acyclovir Tab IP 200 mg 15 Acyclovir Tab IP 800 mg 16 Adenosine Injection 6 mg/2ml 17 Adrenaline Injection IP 1mg/ml IM/IV use 18 Albendazole Oral suspension IP 400 mg/10ml 19 Albendazole Tablets IP 400 mg(Detail in RC) 20 Alendronate Sodium Tablets USP / BP 35 mg 21 Allopurinol Tablets IP 100 mg 22 Alpha Interferon Injection Interferon Alpha 2 concentrated Solution IP 3 Million Unit 23 Alprazolam Tab IP 0.25 mg 24 Alprazolam Tab IP 0.5mg 25 Amikacin Inj IP 100 mg 26 Amikacin Inj IP 250 mg 27 Amikacin Inj IP 500 mg 28 Aminophylline Inj IP 25 mg/ml 29 Amiodarone Hydrochloride Inj 50 mg/ml 30 Amiodarone Tab IP 100 mg 31 Amiodarone Tab IP 200 mg 32 Amitriptyline Tab IP 25mg Film Coated 33 Amlodipine and Atenolol Tablet (Amlodipine Besilate Equivalent to Amlodipine 5mg,Atenolol 50mg) 34 Amlodipine and Enalapril Maleate Tablets (Amlodipine Besilate equivalent to Amlodipine 5 mg, Enalapril Maleate 5 mg) 35 Amlodipine and Lisinopril Tablets Amlodipine Besilate equivalent to Amlodipine 5 mg, Lisinopril eq to Lisinopril (anhydrous) 5 mg 36 Amlodipine Tab IP 2.5 mg 37 Amlodipine Tablets IP 5 mg 38 Amoxicillin and Potassium Clavulanate Inj IP 1.2gm 39 Amoxicillin and Potassium Clavulanic IP Inj 600mg 40 Amoxycillin and Cloxacillin Cap 250 + 250 mg 41 Amoxycillin and Potassium Clavulanate Tabs IP 500 mg + 125 mg 42 Amoxycillin and Potassium Clavunate oral suspension Ip 200 mg +28.5 mg/5 ml (30ml Bottle) 43 Amoxycillin Cap IP 250mg 44 Amoxycillin Cap IP 500mg 45 Amoxycillin Dispersible Tablets IP 125 mg 46 Amoxycillin Oral Suspension IP (Dry syrup) 125 mg/5ml 47 Amphotericin B Inj IP 50 mg 48 Ampicillin Cap IP 500mg 49 Ampicillin Injection IP 500 mg 50 Antacid Liquid,Each 5ml contains Dried Aluminium Hydroxide Gel 250 mg, Magnesium Hydroxide 250mg, Activated polydimethyl siloxane 50mg 51 Antacid Tablets.Formula,Each chewable tablet contains Magnesium Trisilicate 250 mg, Dried Aluminium Hydroxide Gel 120 mg, Peppermint Oil 52 Anti Inhibitor Coagulation Complex (Human Plasma Protein with a Factor VIII Inhibitor Bypassing Activity of 500 I.U. per Vial) 53 Anticold syrup Each 5 ml contains Phenylephrine Hydrochloride 2.5mg , Chlorpheniramine maleate 1 mg, and Paracetamol 125 mg 54 Artemether and Leumefantrine Tablet (40 mg and 240 mg) 55 Artemether and Leumefantrine Tablet (80 mg and 480 mg) 56 Artesunate Injection 60 mg (I.M. I.V.USE) Each Combo Pack contains Artesunate Injection 60 mgVial, Sodium Bicarbonate Injection IP 5 o/o w/v (1ml ampoule),Sodium chloride Injection IP 0.9o/o w/v (5ml ampoule) 57 Ascorbic Acid Tab IP 500 mg 58 Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab (Each enteric coated tablet contains acetyl salicylic acid 75 mg) 59 Aspirin Tablet IP (Gastro-Resistant) 150 mg 60 Atenolol Tab IP 25 mg 61 Atenolol Tab IP 50 mg 62 Atorvastatin Tab IP 10mg 63 Atorvastatin Tablets IP 40 mg 64 Atracurium Inj 10 mg/ml 65 Atropine Eye Ointment IP 1% 66 Atropine Sulphate Injection 0.6mg/ml 67 Atropine Sulphate Ophthalmic Solution USP 1% 68 Azathioprine Tab IP 50 mg 69 Azithromycin Tab 100 mg Dispersible Tabs 70 Azithromycin Tab IP 500 mg 71 Azithromycin Tablets IP 250mg 72 Aztreonam Injection 1gm 73 Aztreonam Injection USP 500 mg 74 Beclomethasone Inhalation IP 200 mcg/dose 75 Beclomethasone, Neomycin and Clotrimazole Cream (Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % and Clotrimazole 1 %) 10 gram 76 Benzathine Benzylpenicillin Inj IP 12 lac units 77 Benzathine Benzylpenicillin Inj IP 6 lac units 78 Betahistine Tab IP 16 mg 79 Betahistine Tab IP 8 mg 80 Betamethasone Dipropionate Cream IP 0.05% 10 gram 81 Betamethasone Lotion IP 0.05 o/o 82 Betamethasone Sod Phos Inj IP 4mg/ml 83 Betamethasone Tab IP 0.5mg 84 Betaxolol Eye Drops 0.5 o/o 85 Biphasic Isophane Insulin Inj IP (30 % soluble insulin and 70 % isophane insulin) inj. 40 IU/ml(R-DNA Origin) 86 Bisacodyl Tab IP 5 mg 87 Black Disinfectant Fluid (Phenyl) As per Schedule O Grade III 88 Bleomycin Injection IP 15mg (Bleomycin Sulphate Injection 15 units) 89 Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% 90 Bromocriptine Tablets IP 2.5 mg 91 Budesonide Nebulizer Suspension 0.25mg/ml 92 Budesonide Powder for Inhalation 200 mcg 93 Bupivacaine Hydochloride in Dextrose Injection USP Each ml contains Bupivacaine Hydrochloride 5.0 mg Dextrose 80.0 mg 94 Bupivacaine Inj IP 0.5% 95 Calamine Lotion IP 100ml 96 Calcitriol Capsules IP 0.25 mcg 97 Calcium and Vitamin D3 Suspension (Each 5 ml contains Calcium Carbonate equivalent to elemental Calcium 250 mg, Vitamin D3 125 IU ) 98 Calcium Gluconate Inj IP 10% (IV use) 99 Calcium with Vitamin D Tablets USP /Calcium and Colecalciferol Tablets BP(Elemental Calcium 500 mg, Vitamin D3-250 IU) (Non-Chewable) 100 Carbamazepine Oral Suspension USP 100 mg/5ml 101 Carbamazepine Tab IP 100 mg (Film Coated) 102 Carbamazepine Tab IP 200 mg (Film Coated) 103 Carbimazole Tabs IP 5 mg (Film Coated) 104 Carboplatin Injection 150 mg 105 Carboplatin Injection 450 mg 106 Carboprost Tromethamine Injection Each ml contains Carboprost 0.25 mg/ml 107 Carboxymethylcellulose Eye drops 0.5% 108 Cefepime Injection IP 500 mg 109 Cefixime Oral Suspension IP 25mg/ml (Paediatric Drops) 110 Cefixime Tab IP 100 mg 111 Cefixime Tab IP 200 mg 112 Cefoperazone and Sulbactum for Inj (Cefoperazone Sodium eq.to Cefoperazone 1gm and Sulbactum Sodium eq. to Sulbactum 0.5gm)(IM/IV use) 113 Cefotaxime Inj IP 250 mg 114 Cefotaxime Injection 1 g 115 Cefpodoxime Dispersible Tab 50 mg 116 Ceftazidime Inj IP 1g 117 Ceftazidime Inj IP 250 mg 118 Ceftazidime Inj IP 500 mg 119 Ceftriaxone Inj IP 1g /vial 120 Ceftriaxone Inj IP 250 mg/vial 121 Ceftriaxone Inj IP 500mg/vial 122 Cefuroxime Axetil Tab IP 250 mg 123 Cephalexin Cap IP 250 mg 124 Cephalexin Cap IP 500 mg 125 Cephalexin Oral Suspension IP (Cephalexin Dry Syrup IP) 125mg/ 5 ml 126 Cephalexin Tablets 125 mg (Dispersible Tablets) 127 Ceruminolytic Drops (Wax dissolving ear drops) Paradichlorobenzene 2 o/o , Benzocaine 2.7 o/o , Chlorbutol 5 o/o, Turpentine oil 15 o/o 128 Cetirizine syrup IP 5mg/5 ml 129 Cetirizine,Phenylephrine & Paracetamol Tablets Cetirizine 5 mg,Phenylephrine 10 mg & Paracetamol 325 mg Tab 130 Cetrimide Cream IP 15 gm 131 Chlorambucil Tab IP 5 mg 132 Chloramphenicol Eye Drops IP 0.5 0/0 133 Chlordiazepoxide Tablets IP 10mg 134 Chlorhexidine Gluconate Solution 5% 250 ml 135 Chlorhexidine Mouthwash IP/BP 0.2 o/o 136 Chloroquine Phosphate Inj IP 40 mg/ ml 137 Chloroquine Phosphate Suspension IP 50 mg/5ml 138 Chloroquine Phosphate Tab. IP 250mg Eq to 155 mg of Chloroquine base Film Coated 139 Chlorpheniramine Maleate Tab IP 4mg 140 Chlorpromazine Inj. IP 25mg/ml 141 Chlorpromazine Tablets IP 100 mg (Coated Tablet) 142 Chlorpromazine Tablets IP 25 mg (Sugar Coated) 143 Chlorpromazine Tablets IP 50 mg (Coated Tablets) 144 Chlorzoxazone , Diclofenac sodium & Paracetamol Tablets (Chlorzoxazone 250mg , Diclofenac sodium 50mg Paracetamol 325 mg) 145 Cholecalciferol granules 60,000 IU /gm 146 Cinnarizine Tablet IP 75 mg 147 Cinnarizine Tablets IP 25 mg 148 Ciprofloxacin 0.3 o/o and Dexamethasone 0.1 o/o Ear Drops Ciprofloxacin and Dexamethasone Otic Suspension USP 149 Ciprofloxacin Eye Drops 0.3 o/o w/v 150 Ciprofloxacin Injection IP 200mg/100ml F-F-S bottle 151 Ciprofloxacin Ophthalmic Ointment USP 0.3% 152 Ciprofloxacin Tablet IP 500 mg Film Coated 153 Ciprofloxacin Tablets IP 250 mg Film Coated 154 Cisplatin Inj IP 10 mg/10 ml 155 Cisplatin Inj IP 50 mg/ 50 ml 156 Clindamycin Capsule IP 150mg 157 Clindamycin Capsule Ip 300 mg 158 Clindamycin Phosphate Gel USP 1 o/o 159 Clobazam Tablet/Capsule 10 mg 160 Clobazam Tablet/Capsule 5 mg 161 Clomifene Tab IP 25 mg 162 Clomiphene Tab IP 50 mg 163 Clonazepam Tablet 0.5 mg 164 Clopidogrel and Aspirin Tables, Clopidogrel 75 mg and Aspirin 75 mg 165 Clopidogrel Tab IP 75 mg 166 Clotrimazole 1 o/o with Beclomethasone Dipropionate 0.025 o/o Ear Drops 167 Clotrimazole Cream IP 2% w/w 168 Clotrimazole mouth paint (Clotrimazole 1 o/o w/v) 169 Clotrimazole Vaginal Tab IP 500mg 170 Cloxacillin Sodium Inj IP 500mg 171 Coal tar 6% & Salicylic Acid 3% Ointment 172 Compound Benzoic Acid Ointment IP Benzoic Acid 6 o/o + Salicylic Acid 3 o/o 173 Compound Benzoin Tincture IP 174 Compound Sodium Lactate Inj. IP F-F-S bottle 175 Conc Haemodialysis Fluid B.P Acetate concentrate 10 Litre Can 176 Concentrated Solution for Hameodialysis BP Sodium Hydrogen Carbonate Concentrate in 10 Litre Cans 177 Conjugated Estrogen Tabs USP 0.625 mg. 178 Co-trimoxazole oral suspension IP Each 5 ml contains Trimethoprim 40 mg and Sulphamethoxazole 200 mg 179 Co-trimoxazole Tablet (Trimethoprim 160mg+Sulphamethoxazole 800mg) 180 Co-trimoxazole Tablets IP Trimethoprim 40 mg and Sulphamethoxazole 200 mg 181 Syp.Ambroxal15 mg+Terbufaline 1.5 mg+menthol 1.25mg+glucogon 50 mg 182 Cyclophosphamide Inj IP 200 mg 183 Cyclophosphamide Inj IP 500 mg 184 Cyclosporin Capsule USP/IP 50 mg 185 Cytarabine Injection BP 500mg 186 Dacarbazine Injection 500 mg USP/ BP 187 Danazol Cap IP 50 mg 188 Daunorubicin Inj IP 20 mg 189 Deferasirox Tab 100 mg 190 Deferasirox Tab 500 mg 191 Deferiprone Cap 250 mg 192 Deferiprone Cap 500 mg 193 Dental Gel Choline salicylate 8.7 o/o, Benzalkonium Chloride 0.01 o/o, Lignocaine HCl 2 o/o (flavoured gel base) 194 Desferrioxamine Injection IP 500 mg / Vial (For I.M. Inj and I.V S.C. Infusion) 195 Dexamethasone Inj IP 8mg/2ml 196 Dexamethasone Tab IP 0.5 mg 197 Dextromethorphan HBr Syrup IP 13.5mg / 5ml 198 Dextrose Inj IP 10% F-F-S bottle 500 ml 199 Dextrose Inj IP 25% w/v F-F-S bottle 100 ml 200 Dextrose Inj IP 5% F-F-S bottle 500ml 201 Diatrizoate Meglumine & Diatrizoate Sodium Inj USP 60% (iodine Conc.= 292 mg/ml) 202 Diatrizoate Meglumine and Diat Sod Inj USP 76%w/v (iodine = 370 mg/ml) 203 Diazepam Inj IP 10mg/2ml (1M/IV use) 204 Diazepam Tab IP 5 mg 205 Diclofenac Gastro Resistant Tablet IP 50 mg(Enteric Coated) 206 Diclofenac Gel: Diclofenac diethylamine 1.16%, Methyl salicylate 10%, Linseed oil 3%, Menthol 5% 207 Diclofenac Sod + Paracetamol Tablets Diclofenac Sod 50 mg + Paracetamol 325 mg 208 Diclofenac Sodium Inj IP 25 mg/ ml (IM/IV Use) 209 Diclofence Prolonged Release Tablet IP 100 mg 210 Dicyclomine and Paracetamol Tablets Dicyclomine Hydrochloride 20 mg + Paracetamol 325 mg Tablets 211 Dicyclomine Hydrochloride and Activated Dimethicone suspension Each ml contains Dicyclomine Hydrochloride 10mg Activated Dimethicone 40mg 212 Dicyclomine Hydrochloride Oral Solution IP 10mg /5ml 213 Dicyclomine Inj IP 10 mg /ml 214 Dicyclomine Tab IP 10 mg 215 Diethylcarbamazine Tab IP 100 mg 216 Digoxin Inj IP 0.25 mg/ml 217 Digoxin Tab IP 0.25 mg. 218 Diltiazem Tabs IP 30 mg Film Coated 219 Dinoprostone Cream/ Gel 0.5 mg Dinoprostone in Syringe 220 Diphtheria Antitoxin 10000 IU 221 Dobutamine Inj IP/BP 50mg/ml/250mg (Vial/)Dobutamine Inj USP250 mg/5ml(AMP) 222 Domperidone Oral Drops 10mg/ ml (10ml) 223 Domperidone Suspension IP 5mg/5ml 30 ml 224 Domperidone Tab IP 10 mg 225 Dopamine Hydrochloride Inj 40 mg/ml 226 Doxorubicin Inj IP 50 mg/ 25 ml 227 Doxycycline Cap IP 100 mg 228 Dried Factor VIII Fraction IP (IV use) 1000 IU/Vial 229 Dried Factor VIII Fraction IP (IV use) 500 IU/Vial 230 Dried Human Anti haemophlic Fraction IP (Dried Factor VIII Fraction IP) 250 IU/ Vial (IV use) 231 Drotaverine and Mefenamic Acid Tablets Drotaverine 80 mg and Mefenamic Acid 250 mg 232 Drotaverine Hydrochloride Inj 40 mg/2 ml 233 Drotaverine Tab IP 40 mg 234 Each Combi Bliste pack: Containing 3 tablets of Artesunate(200 mg each) and 2 tablet of Sulphadoxine Pyrimethamine(750mg+37.5mg)each or 3 Tablets of Sulphadoxine Pyrimethamine(500+25)mg 235 Enalapril Maleate Tab IP 2.5mg 236 Enalapril Maleate Tab IP 5mg 237 Enalapril Maleate Tablets IP 10 mg 238 Enoxaparin Sodium Inj IP 60 mg 239 Escitalopram Tab IP 10 mg 240 Ethamsylate Inj 250 mg/ 2ml (IM/IV) 241 Ethinyloestradiol Tabs IP 50 mcg 242 Etoposide Inj IP 100 mg 243 Etoricoxib Tab IP 120mg 244 Etoricoxib Tablet 90 mg 245 Factor IX Concentrate (Purified) 600 I.U.(Human Coagulation Factor IX) 246 Fenofibrate Capsules/ Tab IP 200 mg 247 Fentanyl Citrate Injection 50mcg/ml 248 Fentanyl Citrate Injection IP 2 ml 249 Ferrous Sulphate with Folic Acid Tab (Paediatric) IP Each film coated Tab. Containing Dried Ferrous Sulphate IP-eqivalent to 20mg Elemental Iron and Folic Acid IP-100 mcg 250 Ferrous Sulphate with Folic Acid Tab IP Each film coated Tab. Containing Dried Ferrous Sulphate IP-equiv 100 mg Elemental Iron and Folic Acid IP 0.5 mg 251 Filgrastim Injection (Granulocyte Colony Stimulating Factor) (SC/IV use) 300 mcg 252 Finasteride Tablets IP 5 mg 253 Flavoxate Tablets IP/BP 200 mg (Coated Tablet) 254 Fluconazole Eye Drops 0.3% 255 Fluconazole Tablets IP 150mg 256 Flunarizine Tab 5 mg 257 Fluorouracil Inj IP 250 mg/ 5ml 258 Fluoxetine Cap IP 20 mg 259 Flurbiprofen Sodium Ophthalmic Solution IP 0.03 o/o w/v 260 Folic Acid Tab IP 5 mg 261 Formaldehyde solution (34.5 Per. - 38 Per.) 262 Formoterol Fumerate & Budesonide Powder For Inhalation IP 6 mcg + 200 mcg 263 Framycetin Sulphate Cream 1 o/o 100 gm pack 264 Framycetin Sulphate Cream 1 o/o 30gm Pack 265 Frusemide Tab IP 40 mg 266 Furosemide Injection IP 10mg/ml (IM and IV use) 267 Fusidic Acid Cream IP 2% 268 Gabapentine Tablet/Capsule 100mg 269 Gabapentine Tablet/Capsule 300mg 270 Gadodiamide Inj. 0.5mml/ml Vial 271 Gamma Benzene Hexachloride Lotion 1%(Lindane Lotion USP) 272 Gemcitabine for Injection 1gm 273 Gemcitabine for Injection 200 mg 274 Gentamycin Injection IP 80mg/2ml (IM/ IV use) 275 Gentian Violet Topical Solution USP 1o/o 276 Glibenclamide and Metformin Hydrochloride (SR) Tablets Glibenclamide 5 mg, Metformin Hydrochloride 500 mg (Sustained Release) 277 Glibenclamide Tab IP 5 mg 278 Gliclazide and Metformin Tablets (Gliclazide 80 mg and Metformin HCL 500 mg) 279 Gliclazide Tab IP 40 mg 280 Glimepiride Tab IP 1mg 281 Glimepiride Tab IP 2 mg 282 Glimepiride, Pioglitazone and Metformin Hydrochloride (Sustained release) Tablets Each Tablet contains Glimepiride 2mg, Pioglitazone 15 mg, Metformin Hydrochloride (Sustained Release) 500 mg 283 Glipizide and Metformin Hydrochloride Tablets USP (Glipizide 5 mg, Metformin Hydrochloride 500 mg) 284 Glipizide Tab IP 5mg 285 Glucagon for Injection USP 1 mg/ml 286 Gluteraldehyde Solution 2% 287 Glycerin IP 100 ml 288 Glycerin IP 400 gm 289 Glyceryl Trinitrate Tablets 2.6 mg Controlled Release tablets 290 Glycopyrrolate Inj USP 0.2 mg/ml 291 Griseofulvin Tab IP 125 mg 292 Gum Paint containing Tannic acid 2%, Cetrimide 0.1%, Zinc Chloride 1% 293 Haloperidol Inj IP 5 mg/ml 294 Haloperidol Tab IP 1.5 mg 295 Haloperidol Tab IP 5 mg 296 Halothane BP 297 Heparin Sodium Inj IP 5000 IU/ml (IM/IV use) 298 Homatropine Eye Drops IP 2% 299 Human Albumin Solution IP 20% 300 Human Anti D Immunoglobulin 150 mcg 301 Human Anti D Immunoglobulin Injection 300mcg (IM use) 302 Human Rabies Immunoglobulin Inj 150 IU/ ml 303 Hyaluronidase Injection IP Each vial contains Hyaluronidase IP 1500 I.U. 304 Hydrochlorthiazide Tab IP 12.5 mg 305 Hydrochlorthiazide Tab IP 25mg 306 Hydrocortisone Sodium Succinate Injection IP 100 mg base / vial (IM/IV use) 307 Hydrogen Peroxide Solution IP 6 o/o (20 Vol) 308 Hydroxychloroquine Sulphate Tablets 200mg 309 Hydroxyethyl Starch (130/0.4) 6 o/o w/v with Sodium Chloride 0.9 o/o w/v Intravenous Infusion / Balanced Electrolyte solution of sodium chloride, sodium acetate, potassium chloride, magnesium chloride Intravenous Infusion 310 Hydroxyprogesterone Inj IP 250mg /ml 311 Hydroxypropylmethyl cellulose solution 20 mg/ ml 312 Hydroxyzine Tab IP 25 mg 313 Hyoscine Butyl bromide Tablets IP 10mg 314 Hyoscine Butylbromide Inj IP 20 mg/ ml 315 Ibuprofen and Paracetamol Tablets Ibuprofen 400 mg+Paracetamol 325 mg 316 Ibuprofen Oral Suspension BP /USP 100 mg/ 5 ml 317 Ibuprofen Tab IP 200 mg (Coated) 318 Ibuprofen Tab IP 400 mg (Coated) 319 Ifosfamide Injection USP/BP 1gm 320 Imatinib Tab 400mg 321 Imipramine Tab IP 25 mg (Coated Tab) 322 Imipramine Tab IP 75 mg (Coated) 323 Indomethacin Cap IP 25 mg 324 Insulin Glargine 100IU/ml 3 ml Vial 325 Insulin Glargine 100IU/ml 5ml Vial 326 Insulin Injection IP (Soluble Insulin/Neutral Insulin Injection)40 IU/ml(r.DNA origin) 327 Iohexol USP (Solution For Injection) Non Ionic Contrast Medium in Sterile aquous Solution 300 mg Iodine/ml 328 Iohexol USP(Solution for Injection) Non Ionic contrast medium in Sterile aqueous solution 350 mg Iodine/ml. 329 Ipratropium Bromide Nebulizer Solution 250 mcg/ ml 330 Ipratropium Powder For Inhalation IP 40 mcg 331 Iron and Folic Acid Suspension. Each 5ml contains Ferrous Fumerate equivalent to elemental iron 100mg, Folic Acid 500 mcg 332 Iron Sucrose Injection USP/BP 20mg/ml (For IV use) Each ml contains Ferric Hydroxide in complex with Sucrose equiv. to elemental Iron 20 mg 333 Isoflurane USP 334 Isophane Insulin Inj IP 40 IU /ml 335 Isoprenaline Injection IP 2mg / ml 336 Isosorbide dinitrate Tab IP 5 mg 337 Isosorbide mononitrate Tabs IP 20 mg 338 Isoxsuprine Inj IP 5 mg/ml 339 Isoxsuprine Tab IP 20 mg 340 Itraconazole Cap 100 mg 341 Ketamine Inj IP 50 mg/ml 342 Ketoconazole cream 2% 343 Labetalol HCl Inj IP 20mg/4ml 344 Labetalol Tab IP 100mg 345 Lactic Acid Bacillus Tab 60 million spores 346 Lactulose solution USP/BP 10gm/15ml or 3.35 gm/5ml 347 L-Asparaginase Inj 10000 IU 348 Leflunomide Tablets IP/USP 10mg(Film Coated) 349 Leflunomide Tablets IP/USP 20mg (Film coated) 350 Leucovorin Calcium Inj IP / Calcium Folinate Inj IP 10 mg /ml 351 Levetiracetam Injection 500mg/5ml 352 Levetiracetam Oral Suspension 100mg/ml 353 Levetiracetam Tablet 500 mg 354 Levoceitrizine Tablet 5mg 355 Levodopa and Carbidopa Tab 250 mg+ 25 mg 356 Levodopa and Carbidopa Tablets IP Levodopa 100 mg + Carbidopa 10 mg 357 Levofloxacin Tablets IP 250 mg 358 Lidocaine HCl Topical Solution USP 4% 359 Lignocaine and Adrenaline Inj IP Each ml. Contains Lignocaine Hydrochloride IP 20 mg Adrenaline IP 0.01 mg 360 Lignocaine and Dextrose injection IP Each ml contains Lignocaine 50 mg and Dextrose (monohydrate) 75 mg 361 Lignocaine Gel IP 2% 362 Lignocaine Inj IP 2% 363 Lignocaine Ointment 5 o/o 364 Linezolid Inj 200mg/100ml 365 Linezolid Tablets IP 600 mg 366 Liquid Paraffin IP 100 ml 367 Liquid Paraffin IP 400 ml 368 Lisinopril Tab IP 2.5 mg 369 Lisinopril Tab IP 5 mg 370 Lisinopril Tablets IP 10 mg 371 Lithium Carbonate Tab IP 300 mg 372 Loperamide Tab IP 2 mg 373 Lorazepam Inj 2 mg/ml 374 Losartan Potassium and Amlodipine Tablets IP (Losartan Potassium 50 mg, Amlodipine Besilate eq to Amlopdipine 5mg) 375 Losartan Potassium and Hydrochlorothiazide Tablets IP(Losartan Potassium 50 mg, Hydochlorothiazide 12.5 mg) 376 Losartan Tab IP 25 mg 377 Losartan Tab IP 50 mg 378 Lysol (Cresol with Soap Solution) IP (Cresol 50 o/o + Soap 50 o/o) 379 Magnesium Sulphate Inj. 50mg/ml (50%w/v) 380 Mannitol Inj IP 20% w/v 381 Mannitol with Glycerin Injection 10 o/o + 10 o/o w/v (For Intravenous Infusion) 382 Mecobalamin Inj 500 mcg/ml 383 Medroxyprogesterone acetate Tablets IP 10 mg 384 Mefenamic Acid Tablets BP 500 mg 385 Mefloquine Tablets IP 250 mg 386 Melphalan Tab IP 5 mg 387 Mercaptopurine Tab IP 50 mg 388 Meropenem Inj IP 500 mg 389 Meropenem Inj. IP 1gm 390 Metformin HCL (Sustained Release) and Glimepiride Tab Metformin HCL (Sustained Release) 500mg ,Glimepiride 1mg 391 Metformin Hydrochloride (Sustained Release) and Glimepiride Tablets (Metformin Hydrochloride(Sustained Release) 500 mg, Glimipiride 2mg) 392 Metformin Hydrochloride(Sustained Release Tablets IP 1000 mg 393 Metformin Tab IP 500 mg(Film Coated) 394 Methotrexate Inj IP 50 mg/2 ml 395 Methotrexate Tab IP 2.5 mg 396 Methotrexate Tablets IP 10 mg 397 Methyl Cobalmine Tablet 1500mcg 398 Methyl Cobalmine Tablet 500mcg 399 Methyl Prednisolone Sodium Succinate for Injection USP 500 mg 400 Methyldopa Tab IP 250mg Film Coated 401 Methylergometrine Inj IP 0.2 mg/ml 402 Methylergometrine Tab IP 0.125 mg 403 Metoclopramide Hydrochloride Syrup IP 5 mg/ 5ml 404 Metoclopramide Inj IP 10mg/2ml 405 Metoclopramide Tab IP 10 mg 406 Metoprolol Succinate Extended Release Tablets IP/USP 50 mg 407 Metoprolol Tablets IP 25 mg 408 Metronidazole 1% and Chlorhexidine Gluconade 0.25% Gel 409 Metronidazole and Norfloxacin suspension 100 mg + 100 mg per 5ml 410 Metronidazole Benzoate Oral Suspension IP 100 mg of base/5ml 411 Metronidazole Inj IP 500 mg/ F-F-S bottle 100 ml 412 Metronidazole Tablets IP 200 mg (Film Coated) 413 Metronidazole Tablets IP 400 mg (Film Coated) 414 Miconazole Nitrate Cream IP 2% 415 Midazolam Inj IP 1 mg/ml 416 Mifepristone Tab IP 200mg 417 Misoprostol Tab IP 200 mcg 418 Mitomycine Injection IP 10 mg/Mitomycine for Injection USP 10 mg 419 Montelucast(10mg) + Levocetrizine Tablet (5mg) 420 Morphine Sulphate Inj IP 10mg/ml 421 Multiple Electrolytes and Dextrose Injection Type I IP (Electrolyte P Injection )F-F-S bottle 500 ml 422 Multiple Electrolytes and Dextrose Injection Type III IP Electroylte M Injection ( I.V. )F-F-S bottle 500 ml 423 Multivitamin Drops Each ml contains Vit A 3000 IU, Vit D3 300 IU, Vit B1 1mg, Riboflavine Phosphate Sodium 2mg, D-Panthenol 2.5mg, Niacinamide 10mg, Pyridoxine HCL 1mg, Cyanocobalamin 1mcg, Lysine HCL 10mg 424 Multivitamin Tablets NFI Formula Sugar coated Vit A 2500 IU Vit B1-2mg Vit-B6-0.5mg Vit-C-50mg Calcium Pantothenate-1mg Vit-D3-200IU Vit-B2-2 mg Niacinamide-25mg Folic Acid-0.2 mg 425 Naloxone Inj IP 0.4mg/ ml 426 Naproxen Tablet IP 250mg 427 Naproxen Tablet IP 500mg 428 Neomycin, Polymixin B and Hydrocortisone Ear Drops Neomycin sulphate 3400 IU, Polymixin B Sulphate 10000 IU, and Hydrocortisone 10 mg per ml Neomycin and Polymixin B Sulfate and Hydrocortisone Otic Solution USP 429 Neostigmine Inj IP 0.5 mg/ml 430 Neostigmine Injection IP 2.5mg/5ml 431 Neostigmine Tab IP 15 mg 432 Nifedipine Cap IP 5mg 433 Nifedipine Tablets IP 10 mg (Sustained Release) 434 Nitrofurantoin Tab IP 100mg 435 Nitroglycerin Inj 5 mg/ ml 436 Noradrenaline Injection IP 2 mg/ml 437 Norethisterone Tab IP 5 mg 438 Norfloxacin Tab IP 400mg Film Coated 439 Normal Human Intravenous immunoglobulin 5g/100ml 440 Octreotide Injection 50 mcg/ml 441 Ofloxacin and Ornidazole Tablets Ofloxacin 200 mg and Ornidazole 500 mg 442 Ofloxacin Infusion IP 200mg / 100 ml F-F-S bottle 443 Ofloxacin Oral Suspension IP 50mg/ 5ml 444 Ofloxacin Tab IP 200 mg 445 Ointment containing Lidocaine IP 3 o/o Zinc oxide IP 5 o/o , Hydrocortisone IP 0.25 o/o, Allantoin IP 0.5 o/o 446 Olanzapine Tab IP 5 mg 447 Omeprazole Cap IP 20 mg 448 Ondansetron Inj IP 2mg/ml 449 Ondansetron Orally Disintegrating Tablets IP 4mg 450 ORS Powder IP 21.8 gram 451 Oseltamivir Capsule IP 30 mg (Each Capsule Contains Oseltamivir Phosphate equivalent to Oseltamivir 30 mg) 452 Oseltamivir Capsule IP 45 mg Capsule(each Capsule Contains Oseltamivir Phosphate equivalent to Oseltamivir 45 mg) 453 Oseltamivir Capsule IP 75 mg Capsule(each Capsule Contains Oseltamivir Phosphate equivalent to Oseltamivir 75 mg) 454 Oseltamivir Phosphate for Oral Suspension IP 12 mg/ml (Each ml contains 12 mg Oseltamivir base after reconstitution) 455 Oseltamivir Phosphate for Oral Suspension IP 12 mg/ml (Each ml contains 12 mg Oseltamivir base after reconstitution) 456 Oxaliplatin Injection USP 50 mg 457 Oxytocin Inj IP 5 IU/ml 458 Paclitaxel Inj IP 100 mg 459 Paclitaxel Inj IP 260 mg 460 Pantoprazole 40mg and Domperidone 30mg SR Cap Pantoprazole as enteric coated pellets and Domperidone as SR Pellets 461 Paracetamol Drops Paediatric Paracetamol Oral Suspension IP(Each ml contains Paracetamol 150mg) 462 Paracetamol Inj. 150 mg/ml 463 Paracetamol Syrup IP 125 mg/5ml (Detail in RC) 464 Paracetamol Tab IP 500 mg 465 Pentazocine Inj IP 30mg/ml (IM/IV use) 466 Pentoprazole Inj 40 mg 467 Peritonial Dialysis Solution IP 468 Permethrin Cream 5% 469 Permethrin Lotion 5% 470 Pheniramine Inj IP 22.75mg /ml 471 Phenobarbitone Inj IP 200mg/ml 472 Phenobarbitone Tab IP 30 mg 473 Phenylephrine Hydrochloride opthalmic solution USP/Phenylephrine Eye Drops BP 5% 474 Phenytoin Injection 50mg/ml 475 Phenytoin Oral suspension IP 25mg/ml 476 Phenytoin Tab IP 100 mg (Film Coated) 477 Pilocarpine Eye Drops IP 2 o/o 478 Pioglitazone Tab IP 15 mg 479 Piperacillin + Tazobactum for Injection USP 4gm+500mg 480 Polygeline 3.5% Solution with electrolytes for I.V. Infusion 481 Potassium Chloride Inj. 0.15 gm/ml 482 Potassium chloride Oral Solution U.S.P 500mg/ 5ml 483 Povidone Iodine ointment 5% 15 gm 484 Povidone Iodine Ointment USP 250 gm 485 Povidone Iodine solution IP 5 % 500 ml 486 Povidone Iodine solution IP 5% 100ml bottle 487 Pralidoxime Chloride Injection IP 25 mg/ml / 500 mg 488 Prazosin Tablets (Extended Release) 2.5 mg 489 Prednisolone Tab 20 mg 490 Prednisolone Tab IP 5 mg 491 Prednisolone Tablet IP 10 mg 492 Pregabalin Cap IP 75 mg 493 Primaquine Tab IP 2.5 mg 494 Primaquine Tab IP 7.5 mg 495 Progesterone Inj 200 mg/ 2ml 496 Promethazine Inj IP 25mg/ml 497 Promethazine Syrup IP 5 mg/5ml 30 ml 498 Promethazine Tab IP 25 mg 499 Propofol Inj IP/BP/USP 10 mg/ml 500 Propranolol Tab IP 40 mg 501 Pyridoxine Tablet IP 10 mg 502 Pyridoxine Tablet IP 40mg 503 Quetiapine Tablet IP 25mg 504 Quetiapine Tablet IP 50mg 505 Quinine Dihydrochloride Inj IP 300 mg/ml 506 Quinine Sulphate Tablets IP 300 mg (Film Coated) 507 Rabies Antiserum IP (Equine) 300 units per ml contains equine anti-rabies immunoglobulin fragments (I.M./SC use) 508 Rabies Vaccine Human (Cell Culture) IP (Intradermal) 2.5 IU 509 Rabies Vaccine Human (Cell Culture) IP (Intramuscular) 2.5 IU/ dose 510 Ramipril Tablets IP 2.5 mg 511 Ranitidine HCL Injection IP 50mg/2ml 512 Ranitidine Tab IP 150mg Film Coated 513 Ranitidine Tab IP 300mg Film Coated 514 rh-Erythropoetin Inj 10000 IU 515 rh-Erythropoetin Inj 2000IU 516 rh-Erythropoetin Inj 4000 IU 517 Risperidone Tab 1 mg 518 Risperidone Tab 2mg 519 Salbutamol Inhalation 100 mcg /dose 520 Salbutamol Nebuliser solution BP 5 mg/ml 521 Salbutamol Syrup IP 2mg/ 5ml 30ml 522 Salbutamol Tab IP 2 mg 523 Salbutamol Tablet IP 4 mg 524 Saline Nasal Solution (Drops) (Sodium chloride 0.65 o/o) 525 Sertraline Tab 50 mg 526 Sevoflurane 527 Silver Sulphadiazine cream IP 1% 500 gm Jar 528 Silver Sulphadiazine cream IP 1% 50gm Tube 529 Snake Venum Anti Serum IP (Lyophilized)Polyvalent Anti Snake Venum,Serum Enzyme Refined.Contain purified equine globulins.1 ml of serum neutralizes 0.6 mg of cobra venum,0.45 mg of common kraite(Bungaras)venum(Details in RC) 530 Sodium Bicarbonate Inj IP 7.5% w/v 531 Sodium Chloride Inj IP 500 ml F-F-S bottle 532 Sodium Chloride Injection IP 100 ml F-F-S bottle 533 Sodium Phosphates Enema BP Each 100ml contains Sodium Dihydrogen phosphate Dihydrate 10 o/o Disodium Hydrogen Phosphate Dodecahydrate 8 o/o 534 Sodium Valproate Gastro resistant Tablets IP 200 mg 535 Sodium Valproate Inj 100 mg/ ml 536 Sodium Valproate Oral Solution IP 200 mg / 5 ml 537 Sodium Valproate Tablet(Gastro Resistant) IP 500mg 538 Spironolactone Tab IP 25mg 539 Spironolactone Tablets IP 50 mg 540 Streptokinase Injection 15 lac units 541 Succinylcholine Inj. IP 50 mg/ml (IV use) 542 Sulfasalazine Delayed Release Tablets USP / Gastroresistant Sulfasalazine Tablets BP 500 mg 543 Surfactant for intratrecheal instillation (natural bovine lung surfactant) 544 Surgical Spirit IP/BP (100 ml) 545 Surgical Spirit IP/BP (500 ml) 546 Tamoxifen Tab IP 10 mg 547 Tamsulosin HCl Tablets/capsule 0.4 mg 548 Telmisartan Tablets IP 40 mg 549 Terazosin Tab USP 1 mg 550 Terazosin Tablets USP 2 mg 551 Terbutaline Tablets IP 2.5 mg 552 Tetanus Vaccine (adsorbed) IP 5 ml vial 553 Theophylline and Etofylline Injection (Anhydrous Theophylline 50.6mg + Etofylline 169.4 mg) 554 Theophylline Tablet 400mg Sustained Release/ Controlled Release (Theophylline Prolonged Released Tablet IP) 555 Thiamine Tablets IP 100 mg 556 Thiopentone Inj IP 0.5 g 557 Thyroxine Sodium Tablets IP 100mcg 558 Thyroxine Tablets IP 50 mcg 559 Timolol Eye Drops IP 0.5 o/o w/v 560 Tinidazole Tab IP 300 mg (Film Coated) 561 Tinidazole Tab IP 500 mg (Film Coated) 562 Tobramycin and Dexamethasone Ophthalmic Suspension USP 0.3 o/o +0.1 o/o 563 Tobramycin Eye Drops 0.3% [331] 564 Tobramycin Ophthalmic Ointment USP 0.3% 565 Tooth Gel Sodium Monofluorophosphate 0.7 o/o and Potassium Nitrate 5 o/o (in flavoured base) 566 Torsemide Inj 10 mg/ml 567 Tramadol Cap IP 50 mg 568 Tramadol Inj 50 mg/ml 569 Tranexamic Acid Tablets IP/BP 500 mg 570 Travoprost Eye Drops IP 0.004 o/o 571 Tretenoin cream USP 0.025% 572 Trifluperazine Tab IP 5 mg Coated 573 Trihexyphenidyl HCl Tab IP 2 mg 574 Tropicamide eye drop IP 1o/o 575 Urokinase Injection 5 Lac Unit (Lyophilized) 576 Ursodeoxycholic Acid Tablets 300 mg 577 Valethamate Bromide Inj 8mg / ml 578 Vancomycin For Intravenous Infusion IP 1 gm 579 Vancomycin for Intravenous Infusion IP 500 mg 580 Vecuronium Bromide for Injection 4mg (Freeze Dried) 581 Verapamil Tab IP 40 mg Film Coated 582 Vinblastine Inj IP 10mg/ 10ml 583 Vincristine Inj IP 1mg(vial)/Vincristin Injection USP 1mg/ml (Amp) 584 Vitamin A Paediatric Oral Solution IP(Vitamin A Concentrate Oil IP)Each ml Contains Vitamin A 100000 IU 585 Vitamin B Complex Inj NFI 586 Vitamin B complex tablet NFI (prophylactic) B1 2mg B2-2mg B6- 0.5mg Niacinamide 25mg Calcium pantothenate 1mg (With appropriate overages) 587 Vitamin D3 Oral Solution 60000 IU 588 Vitamin K Injection Each ml Contains Menadione Sodium Bisulphite 10mg Equivalent to 5.2 mg of Menadione. (Aqueous Solution) 589 Vitamin K-1 (Phytomenadione) 1mg/0.5ml injection (Detail in RC) 590 Warfarin Sodium. Tab IP 5mg 591 Water for Inj IP 5 ml 592 Xylometazoline Nasal Drops IP 0.1% 593 Zinc Sulphate Dispersible Tablets IP Elemental Zinc 10 mg 594 Absorbable Gelatin Sponge 80 x 50x 10mm(Details in RC) 595 Absorbent Cotton Wool IP 500 gm 596 Asepto Syringe with Transparent Bulb Sterile, 60 ml 597 Blood Administration Set Blood Transfusion Set (Details in RC) 598 Gloves Size 6.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details in RC) 599 Gloves Size 6.5 Inches,Powder free (Disposable Sterile Surgical Rubber Gloves)(Details in RC) 600 Gloves Size 7 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details in RC) 601 Gloves Size 7 Inches,Powder free (Disposable Sterile Surgical Rubber Gloves)(Details in RC) 602 Gloves Size 7.5 Inches,Powdered (Disposable Sterile Surgical Rubber Gloves)(Details in RC) 603 Gloves Size 7 .5Inches,Powder free (DisposableSterile Surgical Rubber Gloves)(Details in RC) 604 Suction Catheter, Sterile.Size: FG 5 (Details in RC) 605 Suction Catheter, Sterile. Size: F G-6 (Details in RC) 606 Suction Catheter, Sterile. Size: F G-8 (Details in RC) 607 Suction Catheter, Sterile. Size: F G-10 (Details in RC) 608 Suction Catheter, Sterile. Size: F G-12 (Details in RC) 609 Suction Catheter, Sterile. Size: F G-14 (Details in RC) 610 Suction Catheter, Sterile. Size: F G-16 (Details in RC) 611 Suction Catheter, Sterile. Size: F G-18 (Details in RC) 612 Suction Catheter, Sterile. Size: F G-20 (Details in RC) 613 Suction Catheter, Sterile. Size: F G-22 (Details in RC) 614 Catheter,Size 8(Foleys Ballon Catheter Sterile,2 way for Urinary Drainage,Single Use,)Silicon coated natural Latex material(Details in RC) 615 Catheter,Size 10(Foleys Ballon Catheter Sterile,2 way for Urinary Drainage,Single Use,)Silicon coated natural Latex material(Details in RC) 616 Catheter,Size 16(Foleys Ballon Catheter Sterile,2 way for Urinary Drainage,Single Use,)Silicon coated natural Latex material(Details in RC) 617 Catheter,Size 18(Foleys Ballon Catheter Sterile,2 way for Urinary Drainage,Single Use,)Silicon coated natural Latex material(Details in RC) 618 Catheter,Size 20(Foleys Ballon Catheter Sterile,2 way for Urinary Drainage,Single Use,)Silicon coated natural Latex material(Details in RC) 619 Catheter,Size 22(Foleys Ballon Catheter Sterile,2 way for Urinary Drainage,Single Use,)Silicon coated natural Latex material(Details in RC) 620 Catheter,Size 24(Foleys Ballon Catheter Sterile,2 way for Urinary Drainage,Single Use,)Silicon coated natural Latex material(Details in RC) 621 Infant Feeding Tube Size 10FG(Details in RC) 622 Infant Feeding Tube Size 8FG(Details in RC) 623 Infant Feeding Tube Size 5FG(Details in RC) 624 Perfusion Set with Airway and Needle,(Adult Use) Sterile Disposable(Details in RC) 625 Perfusion Set (Infusion set) with Airway and Needle (Paediatric Use)Sterile Disposable(Details in RC) 626 Infusion Set with Microdrip,(I.V.)Sterile Disposable(Details in RC) 627 Insulin syringe ( 40 units) with (fixed) 30 G needle Shall conforn to IS 12227 628 Sterile Disposable (Single Use) Teflon/PTFE I.V Cannula with integrated 3 Way stop cock Size 16G (Details in RC) 629 Sterile Disposable (Single UseTeflon / PTFE I.V. Cannula with integrated 3 Way stop cock.) Size 18G (Details in RC) 630 Sterile Disposable (Single Use) Teflon/PTFE I.V. Cannula with integrated 3 Way stop cock.Size 20 G (Details in RC) 631 Sterile Disposable (Single Use) Teflon/PTFE I.V. Cannula with integrated 3 Way stop cock.Size 22G (Details in RC) 632 Sterile Disposable (Single Use) Teflon/ PTFE I.V. Cannula without port Size 24G (Details in RC) 633 Mucus Extractor Sterile(Details in RC) 634 Nasal Oxygen Set, Twin Bore All Sizes Adult (Details in RC) 635 Nasal Oxygen Set, Twin Bore All Sizes Paediatrics (Details in RC) 636 Paper Adhesive Plaster 1 inch X 9.0 mts (with cutter) Non woven adhesive tape 637 Paper Adhesive Plaster 2 inch X 9.0 mts (with cutter) Non Woven Adhesive Tape 638 Paper Adhesive Plaster 3 inch X 9.0 mts (with cutter) Non woven adhesive tape 639 Plaster of Paris Bandage 15cm X 2.7 mts/Roll 640 Plaster of Paris Bandage 10cm X 2.7mts 641 Ryles Tube / Nasogastric Tube Size: 10(Details in RC) 642 Ryles Tube / Nasogastric Tube Size: 12(Details in RC) 643 Ryles Tube / Nasogastric Tube Size:14 (Details in RC) 644 Ryles Tube / Nasogastric Tube Size: 16 (Details in RC) 645 Ryles Tube / Nasogastric Tube Size: 18 (Details in RC) 646 Scalp Vein Set (Disposable) Size 18G (Details in RC) 647 Scalp Vein Set (Disposable) Size 20G (Details in RC) 648 Scalp Vein Set (Disposable) Size 22G (Details in RC) 649 Scalp Vein Set (Disposable) Size 24 G (Details in RC) 650 Syringe 2 ml Hypodermic with Needle attached 24G,Sterile,Single Use Disposable(Details in RC) 651 Syringe 5 ml Hypodermic with Needle attached 24G,Sterile,Single Use Disposable(Details in RC) 652 Syringe 10 ml Hypodermic with Needle attached 22G,Sterile,Single Use Disposable(Details in RC) 653 Syringe 20 ml Hypodermic with Needle attached 22G,Sterile,Single Use Disposable(Details in RC) 654 Surgical Blade Sterile, Size 11(Details in RC) 655 Surgical Blade Sterile, Size 15(Details in RC) 656 Surgical Blade Sterile, Size 22(Details in RC) 657 Suture Needles Curved 1/2 Circle Round Body Assorted Size 11-15(Details in RC) 658 Suture Needles Curved 1/2 Circle Round Body Assorted Size 1-5(Details in RC) 659 Suture Needles Curved 1/2 Circle Round Body Assorted Size 16-20(Details in RC) 660 Suture Needles Curved 1/2 Circle Round Body Assorted Size 6-10(Details in RC) 661 Suture Needles Curved And Cutting 1/2 Circle Cutting Size 6-10(Details in RC) 662 Suture Needles Curved And Cutting 1/2 Circle Size 11-15(Details in RC) 663 Suture Needles Curved And Cutting 1/2 Circle Size 16-20(Details in RC) 664 Suture Needles Curved And Cutting Size 1-5(Details in RC) 665 Sterile Disposable Spinal Needle for Single Use. 22G x 3 1/2 inch (Details in RC) 666 Sterile Disposable Spinal Needle for Single Use. 25G x 3 1/2 inch (Details in RC) 667 Urine Collecting Bag, Disposable 2000 ml(Details in RC) 668 Double J Stent, Sterile, Both Ends Open - size 4F, length 16 cm 669 Double J Stent, Sterile, Both Ends Open, size 5F, length 20 cm 670 Double J Stent, Sterile, One End Closed - size 4F, length 16 cm 671 Double J Stent, Sterile, One End Closed, size 5F, length 20 cm 672 Endotracheal Tube, Plain - Size 2.5 (Details in RC) 673 Endotracheal Tube, Plain - Size 3 (Details in RC) 674 Endotracheal Tube, Plain - Size 3.5 (Details in RC) 675 Endotracheal Tube, Plain - Size 4 (Details in RC) 676 Endotracheal Tube, Plain - Size 4.5 (Details in RC) 677 Endotracheal Tube, Plain - Size 5 (Details in RC) 678 Endotracheal Tube, Plain - Size 5.5 (Details in RC) 679 Endotracheal Tube, Plain - Size 6 (Details in RC) 680 Endotracheal Tube, Plain -Size 6.5 (Details in RC) 681 Endotracheal Tube, Plain - Size 7 (Details in RC) 682 Endotracheal Tube, Plain - Size 7.5 (Details in RC) 683 Endotracheal Tube, Plain - Size 8 (Details in RC) 684 Endotracheal Tube, Plain - Size 8.5 (Details in RC) 685 Endotracheal Tube, Cuffed - Size 4 (Details in RC) 686 Endotracheal Tube, Cuff - Size 4.5 (Details in RC) 687 Endotracheal Tube, Cuff - size 5 Details in RC 688 Endotracheal Tube, Cuff - size 6 (Details in RC) 689 Endotracheal Tube, Cuff- Size 6.5 (Details in RC) 690 Endotracheal Tube, Cuff - Size 7 (Details in RC) 691 Endotracheal Tube, Cuff - size 7.5 (Details in RC) 692 Endotracheal Tube, Cuff - size 8 (Details in RC) 693 Endotracheal Tube, Cuff - size 8.5 (Details in RC) 694 Endotracheal Tube, Cuff - size 9 (Details in RC) 695 Tracheostomy Tube, Plain - All Sizes(Details in RC) 696 Tracheostomy Tube (PVC), Cuffed - All Sizes(Details in RC) 697 Abdominal Drain Kit (with Collection Bag 2000 ml Size 24 (Details in RC) 698 Abdominal Drain Kit, Sterile, Having drainage catheter and Collection Bag (2000 ml) Size 28 (Details in RC) 699 Abdominal Drain Kit,Sterile,Having Drainage Cather and Collection Bag(2000) ml Size 32 (Details in RC) 700 Corrugated Drainage Sheet - All sizes(Details in RC) 701 Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6cm X 15cm OR 7.5cm X 15cm 702 Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 cm X 15 cm 703 Sterilized Umbilical Cotton Tape Width 3 mm, Length 75 cm(Details in RC) 704 Bone Wax Sterilised 705 Temporary Cardiac Pacing Wire (Electrode) Sterile ½ Cir, Tapercut, 26 mm; Reverse cutting 60 mm 706 Skin Graft Knife Blade (Sterile) & Handle(Details in RC) 707 K Wire, length 375 mm; 1mm(Details in RC) 708 K Wire, length 375 mm; 1.6mm(Details in RC) 709 K Wire, length 375 mm; 1.8mm(Details in RC) 710 Face Mask, Disposable(Details in RC) 711 Surgical Cap Disposable (For Surgeons)(Details in RC) 712 Surgical Cap, Disposable (For Nurses) (Details in RC)(Details in RC) 713 Foldable Intra Ocular lense with Injector (Details in RC) 11 to 17.5 714 Foldable Intra Ocular lense with Injector (Details in RC) 18 to 24 715 Foldable Intra Ocular lense with Injector (Details in RC) 24.5 to 28.5 716 Standard PAMA Intra Ocular Lenses (Details in RC) 11 to 17.5 717 Standard PAMA Intra Ocular Lenses (Details in RC) 18 to 24 718 Standard PAMA Intra Ocular Lenses (Details in RC) 24.5 to 28.5 719 Disposable Sterile Surgical Rubber Gloves Size 8 Inches,powdered 720 Disposable Sterile Surgical Rubber Gloves Size 8 Inches,powder free 721 Rubber Examination gloves, Non-Sterile, Extra small(Details in RC) 722 Rubber Examination gloves,size small (Details in RC) 723 Rubber Examination gloves,size Medium (Details in RC) 724 Rubber Examination gloves made of natural rubber latex, Non-Sterile, Size Large (Details in RC) 725 Pressure Monitoring Line / High Pressure Extension Line (Details in RC) 726 Urine Collecting Bag for new born /Paediatric Urine Collection Bag, capacity 100ml (Details in RC) 727 Umbilical Catheter for new born, all Sizes -(Details in RC) 728 Umbilical cord clamp (Details in RC) 729 Absorbable Oxidized Regenerated Cellulose 2 x 3 Topical Absorbable Haemostatic Bactericidal Property(Details in RC) 730 Close wound drainage device under negative pressure (closed wound suction unit) Size of bellow 800 ml, catheter size 16 (Details in RC) 731 Close wound drainage device under negative pressure (closed wound suction unit) Size of bellow 800 ml, catheter size 18 (Details in RC) 732 T-tube for common bile duct drainage, Length 20x60 cm, Size- (Details in RC) 733 Bone Cement 734 Sanitary Napkin Beltless(Details in RC) 735 Sanitary Pads Belt Type(Details in RC) 736 Sanitary Napkin Beltless With Wings (Details in RC) 737 Oxygen Mask (Adult) 738 Oxygen Mask (Pediatric) 739 Foleys Catheter No. 14 740 K-90 Catheter 741 Vein-o- line 3 way with stock cork (for infusion pump) 742 CPAP kit 743 Absorbable Surgical Suture (Sterile Catgut) BP/USP Needled Suture Chromic(3/8 Cir RB Needle 40 mm Length 76 cm) Size -1/0 744 Absorbable Surgical Suture (Sterile Catgut) BP/USP Needled Suture Chromic(1/2 Cir RB Needle 20 mm Length 76 cm) Size -3/0 745 Absorbable Surgical Suture (Sterile Catgut) BP/USP Needled Suture Chromic(1/2 Cir RB Needle 30 mm Length 76 cm) Size -2/0 746 Absorbable Surgical Suture (Sterile Catgut) BP/USP Needled Suture Chromic(1/2 Cir RB Needle 30 mm Length 76 cm) Size -1/0 747 Absorbable Surgical Suture (Sterile Catgut) BP/USP Needled Suture Chromic(1/2 Cir RB Needle 40mm Length 76 cm) Size -1/0 748 Absorbable Surgical Suture (Sterile Catgut) BP/USP Needled Suture Chromic(3/8 Cir RB Needle 30 mm Length 76 cm) Size-2/0 749 Absorbable Surgical Suture (Sterile Catgut) BP/USP Needled Suture Chromic(1/2 Cir RB Needle 45 mm Length 100 cm) Size-1 750 Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic Size-3/0 (3/8 Cir RCutting Needle 26mm, Length 76 cm) 751 Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-co-L-lactide)Size - 3/0 1/2Cir RB Needle 20mm length 70 cm 752 Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-co-L-lactide)Size-2/0 1/2 Cir RB Needle 30mm length 90 cm 753 Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-co-L-lactide)1/2 Cir RB Needle Size-1/0 30mm length 90 cm 754 Absorbable Surgical Suture (Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-co-L-lactide)Size 1 1/2 Cir Tapercut Needle (Heavy) 40mm length 90 cm 755 Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-co-L-lactide)Size-1 1/2 Cir RB Needle40mm length 90 cm 756 Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-co-L-lactide)Size-3/0(1/2 Cir Conventional 25mm length 90 cm)Undyed 757 Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-co-L-lactide)Size-4/0 (1/2 Cir RB Needle 20mm length 70 cm) 758 Absorbable Surgical Suture (Synthetic) Sterilised Needled (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-co-L-lactide)Size-2/0 1/2 Cir RB Needle 40mm L 90cm 759 Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-co-L-lactide)Size-1/0(1/2 Cir RB Needle 40mm length 90 cm) 760 Absorbable Surgical Suture (Synthetic) Sterilised Needled(Braided) Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-co-L-lactide)Size 3/0 3/8 Circle Cutting Needle 22mm length 45 cm 761 Absorbable Surgical Suture(Synthetic)Sterilised Needled(Braided)Coated Polyglactin/Polyglycolic Acid/Poly(Glycolide-co-L-lactide)Size-4/0 3/8 Circle Cutting 16mm Needle,Suture Length 70cm 762 Chromic catgut suture(3/8 Cir RCutting Needle 16 mm, Suture Length 76 cm) Size 5/0 (Details in RC) 763 Chromic catgut suture(3/8 Cir Cutting Needle 8 mm, Suture Length 35 cm) Size 6/0 (Details in RC) 764 Chromic catgut suture(3/8 Cir R Cutting Needle 19 mm needle, Suture Length 76 cm) Size 4/0 (Details in RC) 765 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED BLACK BRAIDED Silk Size 3/0(1/2 Cir RB Needle 20mm, Length 76 cm) 766 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED BLACK BRAIDED SILK Size 3/0(3/8Cir Reverse Cutting Needle 26mm, Length 76 cm) 767 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED BLACK BRAIDED Silk Size 2/0(3/8Cir Reverse Cutting Needle 45mm, Length 76 cm) 768 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED POLYAMIDE MONOFILAMENT BLACK (NYLON) Size 8/0 (3/8 Cir Micropoint Round Body ,6mm Length 38 cm) 769 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED POLYAMIDE MONOFILAMENT BLACK (NYLON)Size 3/0 (3/8 Conventional Cutting Needle 16mm Length 70 cm) 770 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED POLYAMIDE MONOFILAMENT BLACK (NYLON)Size 4/0 (3/8 Conventional Cutting Needle 19mm Length 60 cm.) 771 NON ABSORBABLE SURGICAL SUTURE,STERILISED NEEDLED POLYAMIDE MONOFILAMENT BLACK (NYLON)Size 5/0(3/8 Cir slim blade Cutting Needle 15mm Length 70 cm) 772 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED POLYAMIDE MONOFILAMENT BLACK (NYLON)Size 2/0 (3/8 Cir R Cutting Needle 45mm Length 70 cm.) 773 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED POLYAMIDE MONOFILAMENT BLACK (NYLON)Size 1/0 (3/8 Cir R Cutting Needle 45mm Length 70 cm.) 774 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 5/0(1/2 Cir RB 13 mm Needle,Length 75cm) Double Arm 775 NON ABSORBABLE SURGICAL SUTURE,STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 6/0(3/8Cir RB Taper point double needle 9.3mmLength 60 cm) 776 NON ABSORBABLE SURGICAL SUTURE,STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 7/0 (3/8Cir RB Double 8mm Needle, Length 60 cm) 777 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 5/0(3/8Cir RB 16 mm Needle, Length 70 cm) 778 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 1/0(1/2 Cir RB Needle 30mm Length 90 cm) 779 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 1(1/2 Cir RB Heavy Needle 45mm Length 90 cm) 780 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 5/0(1/2 Cir RB Double Needle 17mm Length 90 cm) 781 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 4/0 (1/2 Cir Tapercut Double Needle 17mm Length 70 cm) 782 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 3/0 (1/2 Cir RB Needle 25mm, Length 90 cm) Double Arm 783 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 2/0 (1/2 Cir RB Needle 30mm, Length 90 cm) 784 NON ABSORBABLE SURGICAL SUTURE,STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 3/0 (1/2 Cir Tapercut Needle 17mm Length 75 cm) Double Arm 785 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 2/0(1/2 Cir Tapercut needle,25 mm Length 90 cm) Double Arm 786 NON ABSORBABLE SURGICAL SUTURE,STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 6/0(3/8 Cir Conventional Cutting PC-3Needle 15mm Length 60cm) 787 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 6/0(3/8 Cir RB 13mm Needle, Length 90 cm Double Arm 788 NON ABSORBABLE SURGICAL SUTURE,STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 4/0(1/2 Cir RB needle 16 mm Length 70 cm) 789 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 3/0(3/8 Cir Cutting Needle 25mm length 45 cm) 790 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 1 (1/2 Cir RB Heavy 40mm, length 90 cm) 791 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 1 (1/2 Cir Reverse Cutting, 45 mm Needle length 100 cm) 792 NON ABSORBABLE SURGICAL SUTURE,STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 8/0 (3/8 Cir RB , 8mm Double Needle, Suture Length of 70Cm) 793 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 4/0 (1/2 Circle Tapercut 13mm Double Needle 70cm) 794 NON ABSORBABLE SURGICAL SUTURE,STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 5/0 (1/2 Circle CC 13mm Needle, Suture Length of 70cm) DOUBLE ARM 795 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 2/0 (1/2 Circle Tapercut Needle 17mm Suture Length of 90cm) Double Arm 796 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED MONOFILAMENT POLYPROPYLENE BLUE Size 3/0 (1/2 Cir RB Needle 25mm, Suture Length of 75cm) Double Arm 797 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED Polybutylate/Silicon Coated Polyster Braided green/ blue Size 4/0(1/2 Cir Tapercut ,17 mm Double Needle, length 75 cm) 798 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED Polybutylate / Silicon Coated Polyster Braided White Size 2/0 (1/2 Cir Tapercut ,17 mm Double Needle, length 90 cm) 799 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED Polybutylate / Silicon Coated Polyster Braided Green/Blue Size 2/0(1/2 Cir Tapercut ,17 mm Double Needle, length 90 cm) 800 Non absorbable surgical suture sterilized needled Polybutylate/Silicon Coated with Polyster Braided(Green/Blue)Size 2/0 1/2 Circle Taper cut,17mm Double armed Needle,Suture Length of 90cm with pledgets Size 6 X 3 X 1.5mm 801 Non absorbable surgical suture sterilized needled Polybutylate/Silicon Coated with Polyster Braided(Green/blue)Size 2-0 1/2 Circle Taper cut,25mm Double armed Needle, Suture Length of 90cm with pledgets Size 6 X 3 X 1.5mm 802 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED Coated Polyster Braided (Green / Blue) with Size 3/0 1/2 Circle Tapercut Double Needle 25mm,Suture Length 90 cm 803 NON ABSORBABLE SURGICAL SUTURE, STERILISED NEEDLED POLYAMIDE MONOFILAMENT BLACK (NYLON) Size 10/0 (3/8 Cutting spatulated Edge Needle, Double arm Needle 6 mm, Suture length 30-42 cm 804 B.B Silk suture (3/8 Cir RB Needle 20mm, Length 76 cm size 4/0 (Details in RC) 805 B.B Silk suture (3/8 Cir RB Needle 16mm, Length 76 cm Size 5/0 (Details in RC) 806 ABSORBABLE SURGICAL SUTURES,STERILISED NEEDLED POLYGLECAPRONE/Polyglyconate,MONOFILAMENT SUTURES Size 2/0 (1/2 Circle Oval RB Needle 26mm Needle,Suture Length of 70cm) 807 ABSORBABLE SURGICAL SUTURES STERILISED NEEDLED MONOFILAMENT POLYGLECAPRONE / Polyglyconate,Size 3/0 (1/2 Circle OvalRB Contrast Needle 26mm, suture length 70cm) 808 ABSORBABLE SURGICAL SUTURES STERILISED NEEDLED MonofilamentPolyglecaprone /Polyglyconate Size 4/0 (1/2 Circle Cutting 16mm Needle,suture length 70cm) 809 ABSORBABLE SURGICAL SUTURES STERILISED NEEDLED MonofilamentPolyglecaprone /Polyglyconate Size 3/0 (3/8 Circle Cutting 25mm Needle, Suture Length of 70cm) 810 Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 (1/2 Circle Reverse Cutting 50 mm Length 90cm) 811 Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2/0 (1/2 Circle RB 31mm Needle, Length 70cm) 812 Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1/0(1/2 Circle RB 30mm Needle,Length 70cm) 813 Absorbable Surgical Suture(Synthetic)Antibacterial coated sterilised needled(Braided coated Polyglactin/Polyglycolic Acid violet)Size 1 1/2 Circle CT round bodied 40mm,GS needle,suture length 90 cm 814 Absorbable Surgical Suture(Synthetic)Antibacterial with sterilised needled(Braided coated Polyglactin/Polyglycolic Acid violet)Size 1/0 1/2 circle CT round bodied 40mm,GS needle,suture length 90 cm 815 Absorbable Surgical Suture (Synthetic) Antibacterial with sterilised needled suture (Braided coated Polyglactin / Polyglycolic Acid violet)Size 2/0 1/2 circle round bodied 30mm, suture length 90 cm 816 Absorbable Surgical Suture (Synthetic) Antibacterial with sterilised needled suture (Braided coated Polyglactin/ Polyglycolic Acid violet)Size 1 1/2 circle Reverse Cutting,OS 40mm, suture length 90 cm 817 absorbable Surgical Suture (Synthetic) Antibacterial with sterilised needled suture (Braided coated Polyglactin / Polyglycolic Acid violet)Size 1/0 1/2 circle Reverse Cutting 36mm, OS needle, suture length 90 cm 818 Absorbable Surgical Suture (Synthetic) Antibacterial with sterilised needled suture(Braided coated Polyglactin/Polyglycolic Acid violet)Size 3/0 1/2 circle round bodied 20mm, suture length 70 cm 819 Absorbable Surgical Suture (Synthetic)Antibacterial with sterilised needled suture (Braided coated Polyglactin/ Polyglycolic Acid violet)Size 3/0 3/8 circle R Cutting, PS-1,24mm, suture length 70 cm 820 Oxygen Regulator with humidifier 821 surgical blade no 23 822 VTM 823 PPE kit 824 liquid ecoshield 825 utility rubber gloves 826 Liquid hand wash 500 mland 5 Ltr 827 Bleeching powder 25 kg 828 liquid hypocloride 829 formaldehyde tablets 830 Makentosh rubber sheet 20 mtr 831 Artery Forcep Criles 6 832 Artery Forcep Criles 8 833 mosquito Forcep 6 834 Scissor 6 835 Scissor 8 836 mayo Scissor 6 837 mayo Scissor 8 838 Tooth Forcep criles 6 839 Tooth Forcep criles 8 840 Needle Holder 6 841 Needle Holder 8 842 S.S Drum 12x15 843 S.S Drum 10x12 844 electric sterilizer 845 s.s tray 12x15 846 Pluse Oxymter & Monitor 847 BP Instrument Desk model 848 BP Instrument Stand model 849 Fumigation machine 850 Kangaroo gown 851 Labour Room apron 852 handwash soap bar 853 Safty dilivary kit 854 New born baby kit 855 Rubber silar all size 856 N95 mask 857 Sigma lock 858 Mop with handle 859 Portable pulse oxymeter 860 BP instrument mercury 861 BP instrument with stand 862 BP instrument bulb 863 BP instrument cuff 864 Bp instrument cloth 865 hand scrub 500ml 866 Lead aprom 867 hand Sanitizer 500Ml 868 Electric Element for Sterlizer 100w/200w 869 Autoclave Elemant 600 kw 870 Digital thermometer 871 Stethoscope 872 Glass Bottal 30 ml with AluminiumCap 873 Plastic bottal 150 ml 874 Brest pump set 875 Deep freezer Graph 876 Record pen for graph 877 plastic box (with lid ) 878 Glass Beker 2000ml above 879 Glass Beker 500ml 880 Vim Liquid (dishwash) 881 Colin 500ml 882 Harpic 500ml 883 Savalon 500ml 884 soap (cloth wash) 125g 885 Scrubber 886 manual breast pump 887 steel contaner 888 Bottle brush 889 Air router 890 Air router burs set 891 dental reamer 8k file 892 B P handle 893 Zink oxide ugienal cement 894 dental probe 895 mouth mirror with probe 896 Dental explorer 897 tweezer 898 GIC cement 899 Crown remover 900 apec alocator 901 Gutta purcha point 902 Arch bar wire 903 calcium hydroxide paste 904 carbolic acid 905 zinc phosphate paste 906 eugenal oil 907 glass bead sterlizer 908 u v chmber 909 patient apron 910 air roater oil 911 rout crayers both side 912 dental suture material 3-0 913 needle holder 914 aretery forcep 915 chetal forcep 916 kidney tray small 917 Cotton 200 Gm[LP.13]-[U] 918 Cotton 400 Gm[LP.12]-[U] 919 Cotton Roll (500 Gm)[LP.39]-[M] 920 Cotton Roll 300 Gm Lp21[LP.0]-[U] 921 Inj. Gemcitabin 200 mg 922 Inj.5 Flurouracil 250 mg 923 Inj. Filgrastim 300 mg 924 Inj. Carboplatin 450 mg 925 Inj. Cyclophosphamide 200 mg 926 Inj. Pacilitaxel 260 mg 927 Inj. Cisplatin 50 mg 928 Inj. Oxaliplatin 50 mg 929 Inj. Gemcitabin 1 gm 930 Inj. Carboplatin 150 mg 931 Inj. Leucovorin 10 mg 932 Inj. Cisplatin 10 mg 933 Inj. Cyclophosphamide 500 mg 934 Inj. Ifosfamide 1 gm with mesna 935 Inj. Pacilitaxel 100 mg 936 Inj. Doxombicin 50 mg 937 Inj. Trastaumab 440 mg 938 Inj. Irinotecan 100 mg 939 Inj. Pemetrexed 500 mg 940 Inj. Pemetrexed 100 mg 941 Inj. Decetaxel 120 mg 942 Tab. Tamoxifen 10 mg 943 Tab. Methotrexate 2.5 mg 944 Tab. Methotrexate 10 mg 945 Tab. Capecitabin 500 mg 946 Tab. Clophosphamide 50 mg 947 Cap. Hysroxyurea 500 mg 948 Inj. Mephentermin 10 ml 949 Inj. Hepatities B Imunoglobin 100 IU 950 Butorphanol tartrate Injection USP 1mg/ml 1ml Size 951 Diclofenac Sodium aqueous Injection 75mg/ml 1ml Size, IV & IM use 952 Paracetamol infusion IP 1% w/v 100ml Size 953 Ketorolac Tablet 10 mg 954 Baclofen Tablet IP 10 mg (Each Uncoated Tablet contains Baclofen IP 10 mg ) 955 Tizanidine Hydrochloride Tablet IP 2 mg (Each Uncoated Tablet contains Tizanidine Hydrochloride IP 2 mg) 956 Dexamethasone Tablet IP 4 mg (Each Uncoated Tablet contains Dexamethasone IP 4 mg) 957 Lamotrigine Tablet IP 50 mg (Each Sustained ReleaseTablet contains Lamotrigine IP 50 mg) 958 Divalproex Extended Release Tablet IP 250 mg (Each Extended Release Film Coated Tablet contains Divalproex Sodium IP Equivalent to Valproic acid 250 mg) 959 Oxcarbazepine Tablet IP 150 mg (Each Film Coated Tablet contains Oxcarbazepine IP 150 mg 960 Amoxycillin Tablet 250 mg+Calvulanic Acid 125 mg IP Each Film Coated Tab Conatin Amoxycillin Trihydrate IP 250 mg & Potassium Clavulanate IP 125 mg 961 Cefadroxil Tablet 250 mg 962 Cefadroxil Tablet 500 mg 963 Ofloxacin Oral Suspension IP (Each 5ml contains Ofloxacin IP 100 mg) 30 ml Size 964 Levofloxacin Tablet IP 500 mg (Each Film Coated Tablet contains Levofloxacin Hemihydrate IP 500 mg) 965 Clindamycin phosphate Injection IP 300 mg 966 Terbinafine Hydrochloride Tablet 250 mg 967 Capecitabine Tablet IP 500 mg (Each Film Coated Tablet contains Capecitabine IP 500 mg) 968 Letrozole Tablet USP 2.5 mg (Each Film Coated Tablet contains Letrozole USP 2.5 mg) 969 Temozolomide Capsule IP 100 mg (Each hard Gelatin Capsule contains Temozolomide IP 100mg) 970 Thalidomide Capsule USP 100 mg (Each Hard Gelatin Capsule contains Thalidomide USP 100 mg) 971 Bicalutamide Tablet USP 50 mg (Each Film Tablet contains Bicalutamide USP 50 mg) 972 6 Thioguanine Tablet USP 40 mg (Each Uncoated Tablet contains 6 Thioguanine USP 40 mg) 973 Zoledronic acid Injection IP 4mg/100ml 100ml Size 974 n Butyl Alcohol Injection 0.26mg/5ml, Citric Acid 2.5mg/5ml and Sod. Chloride Solution 5 ml Size 975 Ethamsylate Tablet BP 500 mg (Each Uncoated Coated Tablet contains Ethamsylate BP 500 mg) 976 Feracrylum 1% w/w Sterile Solution 100 ml 977 Tranexamic Acid Injection IP 100mg/ml 5ml Size 978 Sotalol Hydrochloride Tablet USP/BP 40mg (Each Film Coated Tablet contains Sotalol Hydrochloride USP/BP 40mg) 979 Carvedilol Tablet 3.125 mg 980 Powder Clotrimazole 1% w/w 30 gm 981 Terbinafine Ointment 1%w/w (10 gm Tube) 982 Mupirocin Cream USP 2% (Each Gram contains 21.5 mg Mupirocin Calcium USP in a mineral oil cream base) 15 gm Size 983 Doxylamine Succinate 20 mg & Pyridoxine Hydrochloride 20 mg Tablet (Each Enteric Coated Tablet contains Doxylamine Succinate USP 20 mg & Pyridoxine Hydrochloride IP 20 mg ) 984 Prochlorperazine mesylate Injection 12.5mg/ml 5ml Size 985 Probiotic Sachets 1 gm Size (Each Gram Sachet contains Saccharomyces Boulardii 250mg & Lactic acid Bacillus 150 million spores) 986 Mesalamine Tablet USP 1.2 gm Enteric Coated (Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine USP 1.2 gm) 987 Acyclovir Eye Ointment IP 3% w/w 5gm Size 988 Eye drop Moxifloxacin 0.5% w/v Ophthalmic Solution IP 5ml Size 989 Chloramphenicol 1% w/w Eye ointment IP, 3gm Size 990 Natural Micronised Progesteron Soft gelatin Capsule 200 mg (Each Soft Gelatin Capsule contains Progesteron IP 200 mg) 991 Cabergoline Tablet IP 0.5mg (Each Uncoated Coated Tablet contains Cabergoline IP 0.5mg 992 Human Chorionic Gonadotropin Injection IP 5000 I.U. 993 Levosulpiride Tablet 25 mg (Each Uncoated Tablet contains Levosulpiride 25 mg) 994 Lorazepam Tablet IP 2 mg (Each Uncoated Tablet contains Lorazepam IP 2 mg ) 995 Zolpidem Tablet 5 mg 996 Acebrophylline Tablet 100 mg 997 Ringer Acetate Infusion 500 ml 998 Sodium Chloride 0.45% w/v Polypack 500 ml 999 Sodium Bicarbonate Tablet USP 1 gm (Each Film Coated Tablet contains Sodium Bicarbonate USP 1 gm) 1000 Phenazopyridine Tablet 5 mg 1001 Dutasteride Tablet 0.5 mg 1002 Alkylizer Syrup 1.4 gm/5 ml ( 100 ml ) (Disodium Hydrogen Citrate) 1003 Ferric Carboxymaltose Injection 50 mg/ml 10 ml size 1004 Multi vitamin Syrup 1005 Pyridostigmine Tablet USP 60 mg (Each Tablet contains Pyridostigmine USP 60 mg ) 1006 Caffeine Citrate USP Injection 20mg/ml (equivalent to 10 mg caffeine base/ml) 3ml Size 1007 Vitamin E Capsule 400 mg 1008 inj. Mephentermin 10 ml 1009 Alpha Beta Arteether Injection[LP.26]-[M] 1010 Swine flu vaccine 1011 Triple layer mask for swine flu, COVID 19 1012 Inj hepatitis B imunoglobin 1013 Thermal Guns 1014 Bi PAP 1015 Disposable Bedsheet 1016 Disposable gown 1017 NRM Mask 1018 Neonatal Resuscitation kit 1019 Padediatric oxygen hood 1020 emergency drug trolly 1021 Autoclave drum 15X12 1022 Nebulizer machine 1023 Nebulizer mask padeatric 1024 paediatric ICU Bed with Mattress 1025 Drug Trolly 1026 IV Stand 1027 Electronic Weight machine neonatel 1028 Electronic Weight machine Paediatric 1029 Paediatric Face Mask Size 00 1030 Paediatric Face Mask Size 0 1031 Paediatric Face Mask Size 01 1032 Paediatric Face Mask Size 02 1033 lip valve 1034 pat membrane 1035 RVG 1036 Endo Motor 1037 Ligature wire roll 1038 3-0 silk Suture 1039 11 No. BP Blade 1040 Orifice Opener 1041 Neoendo Path Finder set of 5 1042 Gp points suitable for endo Motor set 1043 Calcium hydroxide powder 10 gram 1044 Zinc oxide resin modifies Powder 100 gram 1045 Plastic Spatula for GIC mixing 1046 EDTA powder 100 gram 1047 Nummit Spray 100 gram 1048 Burs for micromotor 10 piece set 1049 Endo Box 1050 Bur Box 1051 H2o2 400 ml 1052 Hemostat 1053 Resin Finishing Kit 1054 Gingival Separation Cord 1055 Composit resi shade A1 1056 Composit resi shade A2 1057 Etching n bonding liquid 1058 Diamond Burs straight round taper 1059 Rc seal Cement for obturation 1060 Fibroptic air roater 1061 45 degree air roater 1062 Disposable Glass 1063 Dry Mop with Handle 1064 Steel Container 1065 Acebrophylline Tablet/Capsule 100 mg 1066 Alkylizer Syrup 1.4 gm/5 ml( 100 ml )(Disodium Hydrogen Citrate) 1067 Bicalutamide Tablet IP 50 mg (Each Film Tablet contains Bicalutamide IP 50 mg) 1068 Cabergoline Tablet IP 0.5mg (Each Uncoated Coated Tablet contains Cabergoline IP 0.5mg) 1069 Cefadroxil Dispersible Tablet 250 mg(each uncoated Dispersible tablet contain Cefadroxil equivalent to Anhydrous Cefadroxil 250 mg) 1070 Cough Syrup Each 5 ml contains Chloropheniramine Maleate IP 3 mg,Ammonium Chloride 130 mg, Sodium Citrate 65 mg,Menthol 0.5 mg, Syrup Q.S. 60 ml 1071 Ethamsylate Tablet 500 mg (Each Uncoated Coated Tablet contains Ethamsylate 500 mg) 1072 Feracrylum 1% w/v Sterile Solution 100 ml 1073 Inj Poractant Alpha 80 mg/ml in pack of 1.5 ml (Detail in RC) 1074 Insulin Glargine 10 ml vial (100 IU/ml) with 30 Insuline syringes with Needle 1075 Ketorolac Tromethamine Dispersible Tablet 10 mg(each Uncoated Dispersible tablet contains Ketorolac Tromethamine 10 mg) 1076 Letrozole Tablet IP 2.5 mg (Each Film Coated Tablet contains Letrozole IP 2.5 mg) 1077 Liposomol Amphotericine Injection B 50mg 1078 Liquid Medical Oxygen (LMO) 1079 Natural Micronised Progesteron Soft gelatin Capsule 200 mg (Each Soft Gelatin Capsule contains Progesteron IP 200 mg)/Natural Micronised Progesteron Tablet 200 mg (Each Tablet contains Progesteron IP 200 mg) 1080 Neomycin Bacitracin and Sulphacetamide Powder (Neomycin 5 mg, Bacitracin 250 units, Sulphacetamide 60 mg) 1081 Oitment Mupirocin IP 2% 1082 Oxcarbazepine Tablet IP 150 mg (Each Film Coated Tablet contains Oxcarbazepine IP 150 mg) 1083 Povidone Iodine Scrub Solution / cleansing solution 7.5 o/o w/v Povidone Iodine (suitable for hand wash) 1084 Povidone Iodine Solution IP 10 % 1085 Pyridostigmine Tablet IP 60 mg (Each Tablet contains Pyridostigmine IP 60 mg ) 1086 Sodium Chloride and Dextrose Injection IP 0.9 o/o + 5 o/o 1087 Tenaligliptin Tablet IP 20mg 1088 Terbinafine cream 1%w/w (10 gm Tube) 1089 Tetanus Immunoglobulin IP 250 IU/ Vial 1090 Theophylline and Etofylline Tablets (Theophylline IP 23mg + Etofylline 77 mg) 1091 Torsemide Tab 10 IP mg 1092 Zoledronic acid Injection IP 4mg vial 1093 Absorbable Oxidized Regenerated Cellulose netsize 2 x 3 Topical Absorbable Haemostatic Bactericidal Property(Details in RC) 1094 Nelaton Catheter size 14 FG(Detail in RC) 1095 ECG Electrode (Detail in RC) 1096 Surgical Blade Sterile, Size 23 Single Peel package in metal foil As per IS 3319 (Detail in RC) 1097 Sterile Hypodermic Syringe with Needle attached, 22G, Single Use - 50 ml (Detail in RC) 1098 Urethral Catheter 90 (FG-14) made up of medical grade PVC (Detail in RC) 1099 Urethral Catheter 91 (FG-10), made up of medical grade PVC (Detail in RC) 1100 Vaccum Suction Set, 2.5 meter Length (Detail in RC) 1101 3 Way Stop Cock , Non Pyrogenic and Single Use, should be leak proof, with smooth movements (Detail in RC) 1102 3 Way Stop Cock with extension Tube (Vein-O Extension Line) size 10cm (Non Pyrogenic & Single Use) (Detail in RC) 1103 3 Way Stop Cock with extension Tube (Vein-O Extension Line) size 50cm (Non Pyrogenic & Single Use) (Detail in RC) 1104 3 Way Stop Cock with extension Tube (Vein-O Extension Line) size 100cm (Non Pyrogenic & Single Use) (Detail In RC) 1105 3 Way Stop Cock with extension Tube (Vein-O Extension Line) size 150cm (Non Pyrogenic & Single Use) (Detail In RC) 1106 Abdominal Drain Kit, Sterile, having drainage catheter and Collection Bag (2000 ml) (size 16) (Detail in RC) 1107 Abdominal Drain Kit, Sterile, having drainage catheter and Collection Bag (2000 ml) (size 20) (Detail in RC) 1108 Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube (Detail in RC) 1109 Elastic Adhesive Bandage BP 10cm X 1mtr Stretched Length Adhesive material should have good quality sticking property (Detail in RC) 1110 Sterile Disposable (Single Use Teflon/PTFE I.V Cannula with integrated 3 way stop cock Size 26G (Detail in RC) 1111 NIV Mask (Noninvasive Ventilation Mask) Oro nasal covering (Nose & Mouth) mask Adult Large Size for Ventilator without vent (Detail in RC) 1112 NIV Mask (Noninvasive Ventilation Mask) Oro nasal covering (Nose & Mouth) mask Adult Medium Size for Ventilator without vent (Detail in RC) 1113 NIV Mask (Noninvasive Ventilation Mask) Oro nasal covering (Nose & Mouth) mask Adult Large Size for BiPAP with vent (Detail in RC) 1114 NIV Mask (Noninvasive Ventilation Mask) Oro nasal covering (Nose & Mouth) mask Adult Medium Size for BiPAP with vent (Detail in RC) 1115 NIV Mask (Noninvasive Ventilation Mask) Oro nasal mask Paediatric with Bronchoscopy and CO2 and O2 port with chin support (Detail in RC) 1116 Nebulization Mask Adult (Detail in RC) 1117 Nebulization Mask Paediatric (Detail in RC) 1118 Inj Mephentermin 30mg 1119 Inj.Hepatitis b immunoglobulin 1120 Infant Feeding Tube Size 6FG(Details in RC) 1121 Amoxycillin 500 Mg+Clavulanic Acid 125 Mg Tablets[NE29]-[P] 1122 Anti-Oxidants Capsule(Beta Carotene-10 Mg,Vit-E 25mg,Vit-C 100 Mg,Copper 1.5 Mg,Managanese 1.5 Mg,Zinc 7.5 Mg,Selenium 150 Microgram)[NE12]-[M] 1123 Azithromycin Syrup/Suspension 100mg/5ml[NE55]-[SC] 1124 Azithromycin Syrup/Suspension 200mg/5ml[NE56]-[SC] 1125 Buprenorphine 2mg+ Naloxone 0.5mg Tablet[NE1]-[M] 1126 Clarithromycin Tablets 500 Mg[NE28]-[P] 1127 Cycloserine Capsule 250 Mg[NE21]-[P] 1128 Deferasirox Tablet 180 Mg (Film Coated)[NE37]-[DH] 1129 Deferasirox Tablet 90 Mg (Film Coated)[NE36]-[DH] 1130 Enoxaparin Injection 0.2 Ml[NE57]-[DH] 1131 Enoxaparin Injection 0.4 Ml[NE58]-[DH] 1132 Ethionamide Tablets 250 Mg[NE23]-[P] 1133 Glucose Powder (Dextrose Monohydrate) Energy 300 Kcal Carbohydrate 75 Gm Of Which Sugar (Sucrose) 0.00gm Fat And All Type Of Fatty Acids 0.00gm Protein: 0.00gm [NE35]-[M] 1134 Hand Rub(Detail In Rc)[NE31]-[P] 1135 Injection Rtpa (Recombinant Tissue Plasminogen Activator) For Stroke Management 20mg[NE7]-[M] 1136 Injection Rtpa (Recombinant Tissue Plasminogen Activator) For Stroke Management 50mg[NE8]-[M] 1137 Kanamycin Injection 1000 Mg[NE19]-[P] 1138 Kanamycin Injection 500mg[NE18]-[P] 1139 Levothyroxine Sodium Tablet 25 Mcg[NE9]-[DH] 1140 Levothyroxine Sodium Tablet 50 Mcg[NE10]-[P] 1141 Lopinavir 200mg Ritonavir 50mg Tablet[NE33]-[M] 1142 Methylprednisolon Injection 40mg[NE59]-[P] 1143 Methylprednisolon Tab 16mg[NE66]-[C] 1144 Methylprednisolon Tab 8mg[NE65]-[C] 1145 Misoprostol Tablet 200 Mcg[NE2]-[SC] 1146 Mma Drugs (In A Combination Pack) Blister Strip Containing 1 Tab Mifeprestone 200mg And 4 Tab Of Misoprostol 200mcg)[NE17]-[P] 1147 N95 Mask With Valve[NE67]-[P] 1148 Nitrile Gloves Non Sterlite Powder Free Minimum 280mm Length Size 6.5 Inch[NES1]-[P] 1149 Nitrile Gloves Non Sterlite Powder Free Minimum 280mm Length Size 7 Inch[NES2]-[P] 1150 Nitrile Gloves Non Sterlite Powder Free Minimum 280mm Length Size 7.5 Inch[NES3]-[P] 1151 Nitrile Gloves Non Sterlite Powder Free Minimum 280mm Length Size 8 Inch[NES4]-[P] 1152 Paracetamol Syrup/Suspension 250mg/5ml[NE61]-[P] 1153 Piperacillin And Tazobactum Injection 1gm/125mg[NE60]-[P] 1154 Post Expousure Prophylaxis Drugs For Hiv- Drug Combination: Tenofivir 300mg+ Lamivudin 300mg+ Efavirenz 600mg[NE11]-[DH] 1155 Pyridoxine Tablets 100 Mg[NE30]-[P] 1156 Remdesivir Injection 100mg/20ml (Liquid Form)[NE39A]-[DH] 1157 Zinc Syrup 20mg/5ml[NE64]-[P] 1158 Zinc Tab 20mg[NE62]-[M] 1159 Zinc Tab 50mg[NE63]-[P] 1160 Epidural Minipack 18G, 80mm-90mm, Metal Stylet For Single Use only, Sterile (Detail in RC) 1161 Esmolol hydrochloride Injection 10mg/ml 10ml Size 1162 Tenofovir 300 mg+ lamivudine 300mg + dolutegravir 50 mg Tab 1163 Zidovudine 60mg + lamivudine 30 mgTab 1164 Dolutegravir 50 mg Tab 1165 Lamivudine 300mgTab 1166 Tenofavir 300 mg +Lamivudine 300 Mg Tab 1167 Etravirine 200 mg Tab 1168 Bio Medical waste Bag 25 lit 1169 liquid hypocloride 5 liter 1170 Pluse Oxymter & Monitor 1171 Operating Microscope 1172 c-arm machine 1173 Bone Driller 1174 Ortho Operation Table and Knee adjustement 1175 OT Table 1176 Labour Table 1177 Dressing Trolly 1178 Straeture Trolly 1179 Wheel chair 1180 Sigma lock (autoclave Sticker) 1181 Mop with handle Wet 1182 ECG Bulb 1183 Sterlization Element 1184 HIV Delivery kit 1185 HMF SACHE Pouch 1186 Glycrin supposotries 1187 Probiotic Pouch 1188 bacilloid Liquid 1189 baby diapers Size Small and medium 1190 Dynaplast Elastic Adhesive Bandages 1191 eco shield ultragaurd 500 ml 1192 X-Ray view machine 1193 Needle cutter (destroyer) 1194 SS trey 12x15 1195 Drum 12x15 1196 scissors straight 1197 scissors Mayo 1198 scissors Curved 1199 Bain circuit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Rajasthan View Result →
21.
Health and Family Welfare #8860024 Technical Bid
E- Tender For Rate Contract For Supply Of Generic Medicine And Surgical Items For Mndy And Jssk Dist-Sikar , Essential Medicines List , 1. Anaesthetics , 1.1 General Anaesthetics And Oxygen , Halothane , Isoflurane , Ketamine Injection 50 Mg/Ml , Propofol Injection 10 Mg/Ml , Thiopentone Injection 0.5 G , Sevoflurane , Liquid Medical Oxygen (Lmo) , 1.2 Local Anaesthetics , Lignocaine Ointment 5% , Lignocaine Gel Ip 2% , Lignocaine Injection 2% , Lignocaine And Adrenaline Injection 20Mg + 0.01Mg , Lignocaine And Dextrose Injection 50Mg + 75Mg Per Ml , Bupivacaine Hydrochloride In Dextrose Injection 5Mg + 80 Mg Per Ml , Bupivacaine Injection 0.50% , 1.3 Pre-Operative Medication , Atropine Sulphate Injection 0.6 Mg/Ml , Midazolam Injection Ip 1 Mg/Ml , 2. Analgesic, Antipyretic & Anti-Inflammatory Drugs , 2.1 Opioid Analgesics , Morphine Sulphate Injection Ip 10 Mg/Ml , Tramadol Capsule 50 Mg , Tramadol Injection 50 Mg/Ml , Pentazocine Injection 30 Mg/Ml , Fentanyl Citrate Injection 50 Mcg/Ml , Fentanyl Citrate Injection 50 Mcg/Ml , Naproxen Tablet Ip 500 Mg , Naproxen Tablet Ip 250 Mg , Inj. Butorphanol Tartrate Usp 1Mg/Ml 1Ml Size , 2.2 Non-Steroidal Anti Inflammatory Drugs & Antipyretics , Aspirin Tablet Ip (Gastro-Resistant) 150 Mg , Aceclofenac And Paracetamol Tablet 100 Mg + 325 Mg , Diclofenac Gel: Diclofenac Diethylamine , Methyl Salicylate , Linseed Oil And Menthol 1.16%+10%+3%+ 5% , Diclofenac Sodium And Paracetamol Tablet 50 + 325 Mg , Diclofenac Sodium Injection - For Im And Iv 25 Mg/Ml , Diclofenac Sodium Tablet 50 Mg , Diclofenac Tablet (Sr) 100 Mg , Etoricoxib Tablet 90 Mg , Etoricoxib Tablet Ip 120 Mg , Ibuprofen And Paracetamol Tablet 400 Mg + 325 Mg , Ibuprofen Tablet 200 Mg , Ibuprofen Tablet 400 Mg , Ibuprofen Oral Suspension 100 Mg/5Ml , Indomethacin Capsule 25 Mg , Mefenamic Acid Tablet 500 Mg , Paracetamol Drops 150 Mg/Ml , Paracetamol Syrup Ip 125 Mg/5Ml , Paracetamol Tablet 500 Mg , Paracetamol Injection 150 Mg/Ml , Inj Diclofenac Sodium Aqueous 75Mg/Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip 1% W/V 100Ml Size , Tab. Ketorolac 10 Mg , 2.3 Muscle Relaxants , Chlorzoxazone, Diclofenac Sodium & Paracetamol Tablet 250Mg+50Mg+325 Mg , Tab Baclofen Ip 10 Mg (Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tab Tizanidine Hydrochloride Ip 2 Mg (Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg) , 3. Drugs For Gout & Rheumatoid Arthritis , Allopurinol Tablet 100 Mg , Hydroxychloroquine Sulphate Tablet 200 Mg , Leflunomide Phosphate Tablet 10 Mg , Leflunomide Phosphate Tablet 20 Mg , Sulfasalazine Delayed Release Tablet 500 Mg , 4. Antiallergics & Drugs Used In Anaphylaxis , 4.1 Corticosteroids , Betamethasone Tablet 0.5 Mg , Betamethasone Sodium Phosphate Injection 4 Mg/Ml , Dexamethasone Injection 8 Mg/2Ml , Dexamethasone Tablet 0.5 Mg , Hydrocortisone Sodium Succinate Injection 100 Mg Base / Vial , Methyl Prednisolone Sodium Succinate For Injection 500 Mg , Prednisolone Tablet 5 Mg , Prednisolone Tablet 10 Mg , Prednisolone Tablet 20 Mg , Tab Dexamethasone Ip 4 Mg (Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg) , 4.2 Antihistaminics & Drugs Used In Anaphylaxis , Adrenaline Injection 1 Mg/Ml , Chlorpheniramine Maleate Tablet 4 Mg , Hydroxyzine Tablet 25 Mg , Pheniramine Injection 22.75 Mg/Ml , Promethazine Syrup Ip 5 Mg/ 5Ml , Promethazine Injection 25 Mg/Ml , Promethazine Tablet 25 Mg , Anticold Syrup: Phenylephrine Hcl , Chlorpheniramine Maleate, And Paracetamol 2.5 Mg+ 1 Mg+125 Mg/5Ml , Cetirizine, Phenylephrine& Paracetamol Tablet 5 Mg + 10 Mg + 325 Mg , Cetirizine Syrup 5 Mg/Ml , Levoceitrizine Tablet 5Mg , Montelukast 10 Mg + Levocetrizine 5Mg Tablet , 5. Antidotes And Other Substances Used In Poisoning , Naloxone Injection Ip 0.4 Mg/Ml , Pralidoxime Chloride Injection 25 Mg/Ml , N- Acetylcystine Injection 200 Mg/Ml , 6. Anti Epileptic Drugs , Carbamazepine Tablet 200 Mg , Carbamazepine Tablet Ip 100 Mg , Carbamazepine Oral Suspension Usp 100 Mg/5 Ml , Phenobarbitone Tablet 30 Mg , Phenobarbitone Injection Ip 200 Mg/Ml , Phenytoin Injection 50 Mg/Ml , Phenytoin Oral Suspension 25 Mg/Ml , Phenytoin Tablet 100 Mg , Pregabalin Capsule Ip 75 Mg , Sodium Valproate Ip Injection 100 Mg/Ml , Sodium Valproate Tablet 200 Mg , Sodium Valproate Oral Solution Ip 200 Mg/ 5 Ml , Sodium Valproate(Gastro-Resistant) Ip Tablet 500 Mg , Clobazam Tablet/Capsule 5 Mg , Clobazam Tablet/Capsule 10 Mg , Levetiracetam Tablet 500 Mg , Levetiracetam Oral Solution Suspension 100 Mg/Ml , Levetiracetam Injection 500 Mg/5Ml , Gabapentine Tablet/Capsule 100 Mg , Gabapentine Tablet/Capsule 300 Mg , Tab Lamotrigine Ip 50 Mg (Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg) , Tab Divalproex Extended Release Ip 250 Mg (Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg) , Tab Oxcarbazepine Ip 150 Mg (Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg) , Tab Lacosamide 100 Mg (Each Film Coated Tablet Contains Lacosamide 100 Mg) , Tab Topiramate Ip 25 Mg (Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , 7. Anti- Infective Drugs , 7.1 Antibacterials , 7.1.1 Aminoglycosides , Amikacin Injection 100 Mg , Amikacin Injection 250 Mg , Amikacin Injection 500 Mg , Gentamycin Injection 80 Mg/2Ml , 7.1.2 Betalactam , 7.1.2.1 Penicillins , Amoxycillin Capsule 250 Mg , Amoxycillin Capsule 500 Mg , Amoxycillin Trihydrate Dispersible Tablet 125 Mg , Amoxycillin Oral Suspension (Dry Syrup) 125 Mg/5Ml , Amoxycillin And Cloxacillin Capsule 250 Mg + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs 500 Mg + 125 Mg , Amoxicillin And Clavulanic Acid Injection 600 Mg , Amoxicillin And Potassium Clavulanate Injection 1.2 Gm , Amoxycillin & Clavulanic Acid Syrup 200 Mg + 28.5 Mg / 5 Ml , Ampicillin Capsule 500 Mg , Ampicillin Injection Ip 500 Mg , Benzathine Benzylpenicillin Injection Ip12 Lac Units , Benzathine Benzylpenicillin Injection 6 Lac Units , Cloxacillin Sodium Injection 500 Mg , Piperacillin And Tazobactum For Injection 4 Gm + 500 Mg , Tab. Amoxycillin 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Inj Piperacillin 2 Gm + Tazobactom 250Mg Usp , 7.1.2.2 Cephalosporins , Cefepime Injection 500 Mg , Cefixime Tablet 100 Mg , Cefixime Tablet 200 Mg , Cefixime Oral Susp (Drops) 25 Mg/Ml , Cefoperazone And Sulbactum For Injection 1 G + 0.5 G , Cefotaxime Injection 1 G , Cefotaxime Injection 250 Mg , Cefpodoxime Dispersible Tablet 50 Mg , Ceftazidime Injection 1 G , Ceftazidime Injection 250 Mg , Ceftazidime Injection 500 Mg , Ceftriaxone Injection Ip 1 G/Vial , Ceftriaxone Injection 250 Mg , Ceftriaxone Injection Ip 500 Mg/Vial , Cefuroxime Tablet 250 Mg , Cephalexin Capsule 250 Mg , Cephalexin Capsule Ip 500 Mg , Cephalexin Oral Suspension ( Cephalexin Dry Syrup) 125 Mg/ 5Ml , Cephalexin Tablet (Dt) 125 Mg , Inj. Ceftriaxone 1 Gm + Tazobactum 1.25 Gm , Tab.Cefadroxil 250 Mg , Tab.Cefadroxil 500 Mg , 7.1.3 Macrolides , Azithromycin Tablet (Dt) 100 Mg , Azithromycin Tablet Ip 250 Mg , Azithromycin Tablet 500 Mg , 7.1.4 Quinolones , Ciprofloxacin Injection 200 Mg/ 100 Ml , Ciprofloxacin Tablet 250 Mg , Ciprofloxacin Tablet 500 Mg , Levofloxacin Tablet 250 Mg , Norfloxacin Tablet 400 Mg , Ofloxacin Tablet 200 Mg , Ofloxacin Suspension 50 Mg/5 Ml , Ofloxacin Injection 200Mg / 100 Ml , Ofloxacin And Ornidazole Tablet 200 Mg + 500 Mg , Ofloxacin Oral Suspension Ip (Each 5Ml Contains Ofloxacin Ip 100 Mg) 30 Ml Size , Tab. Levofloxacin Ip 500 Mg (Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg) , 7.1.5 Other Anti Bacterials , Aztreonam Injection 500 Mg , Clindamycin Capsule 150 Mg , Clindamycin Capsule 300 Mg , Co-Trimoxazole Oral Suspension 40 Mg + 200 Mg Per 5Ml , Co-Trimoxazole Tablet 40 Mg + 200 Mg , Co-Trimoxazole Tablet 160 Mg + 800 Mg , Doxycycline Capsule 100 Mg , Linezolid Tablet Ip 600 Mg , Linezolid Injection 200 Mg/100 Ml , Meropenem Injection 500 Mg , Meropenem Injection 1 G , Nitrofurantoin Tablet 100 Mg , Vancomycin Injection 500 Mg , Vancomycin For Intravenous Infusion Ip 1 Gm , Aztreonam 1Gm Injection , Framycetin Sulphate Cream 1% , Framycetin Sulphate Cream 1% , Tab. Faropenem Sodium 200 Mg (Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg) , Inj Clindamycin Phosphate Ip 300 Mg , Inj Imipenem + Cilastatin 500Mg/500Mg Ip Powder For Solution , Inj. Polymixin Sulphate B Usp 5 Lac I.U. , Inj Meropenem Ip 250 Mg , Inj Colistimethate Ip 1M Iu Powder For Solution , 7.2 Anti Amoebic , Metronidazole Injection 500 Mg/ 100 Ml , Metronidazole Benzoate Oral Suspension 100 Mg/ 5 Ml , Metronidazole Tablet 200 Mg , Metronidazole Tablet 400 Mg , Tinidazole Tablet Ip 300 Mg (Film Coated) , Tinidazole Tablet Ip 500 Mg (Film Coated) , 7.3 Anthelmintics , Albendazole Oral Suspension 400 Mg/ 10 Ml , Albendazole Tablet Ip 400 Mg , Diethylcarbamazine Tablets Ip 100 Mg , 7.4 Anti Fungals , Clotrimazole Cream Ip 2% W/W , Clotrimazole Vaginal Tablet 500 Mg , Fluconazole Tablet 150 Mg , Griseofulvin Tablets 125 Mg , Itraconazole Capsule 100 Mg , Amphotericin B Injection 50 Mg , Inj. Liposomol Amphotericine B 10 Mg , Inj. Voriconazole 200Mg/Vial , Tab. Terbinafine Hydrochloride 250 Mg , 7.5 Anti Malarials , Artisunate Injection 60 Mg (Combo Pack With 1 Ml Ampoule Of 5% Sodium Bicarbonate Injection And 5 Ml Ampoule Of 0.9% Sodium Chloride Injection) , Chloroquine Phosphate Injection 40 Mg/Ml , Chloroquine Phosphate Tablet 250Mg (=155 Mg Of Chloroquine Base) , Chloroquine Phosphate Suspension 50 Mg/ 5Ml , Mefloquine Tablet 250 Mg , Primaquine Tablet 2.5 Mg , Primaquine Tablet 7.5 Mg , Quinine Dihydrochloride Injection 300 Mg/Ml , Quinine Sulphate Tablet 300 Mg , Act Kit Containing 3 Tablet Of Artesunate (Each Tablet Of Artesunate 25Mg Strength) And 1 Tablet Of Sulphadoxine Pyremethamine (250 Mg+ 12.5 Mg) , Act Kit Containing 3 Tablet Of Artesunate (50Mg Each) And 1Tablet Of Sulphadoxine Pyremethamine (500+25) Mg , Act Kit Containing 3 Tablet Of Artesunate (100 Mg Each) And 1 Tablet Of Sulphadoxine Pyremethamine (750 + 37.5) Mg , Act Kit Containing 3 Tablet Of Artesunate 150 Mg And 2 Tablet Of Sulphadoxine Pyremethamine (500 Mg+ 25 Mg) , Act Kit Containing 3 Tablet Of Artesunate (Each 200 Mg) And 2 Tablet Of Sulphadoxine Pyremethamine (750 + 37.5) Mg Each Or 3 Tablet Sulphadoxine Pyremethamine (500+25) Mg Each , Artemether + Leumefantrine Tablet (40 Mg And 240 Mg) , Artemether + Leumefantrine Tablet (80 Mg And 480 Mg) , 7.6 Anti Viral , Acyclovir Tablet 200 Mg , Acyclovir Tablet 800 Mg , Acyclovir Suspension 400 Mg/ 5Ml , Acyclovir Injection 250 Mg , Acyclovir Injection 500 Mg , Tab. Valganciclovir 450 Mg , Tab. Entecavir Ip 0.5 Mg (Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg) , Inj. Ganciclovir Sodium 500Mg (Lyophilized Powder For Reconstitution) , 8. Anti Neoplastic And Immuno Suppressant Drugs , Azathioprine Tablet Ip 50 Mg , Bleomycin Injection 15 Units , Chlorambucil Tablet 5 Mg , Cisplatin Injection 50 Mg/ 50 Ml , Cyclophosphamide Injection 200 Mg , Cyclophosphamide Injection Ip 500 Mg , Cyclosporine Capsule Usp 50 Mg , Cytarabine Injection 100 Mg/5 Ml , Danazol Capsule Ip 50 Mg , Daunorubicin Injection 20 Mg , Doxorubicin Injection 50 Mg/ 25 Ml , Etoposide Injection 100 Mg/ 5 Ml , Fluorouracil Injection 250 Mg/ 5 Ml , L-Asparaginase Injection 10000 Iu , Leucovorin Calcium Injection 10 Mg/Ml , Melphalan Tablet 5 Mg , Mercaptopurine Tablet Ip 50 Mg , Methotrexate Injection 50 Mg/2 Ml , Methotrexate Tablet 2.5 Mg , Paclitaxel Injection 260 Mg , Paclitaxel Injection 100 Mg , Tamoxifen Tablet 10 Mg , Vinblastine Injection 10 Mg/10 Ml , Vincristine Injection 1 Mg/Ml , Alpha Interferon Injection 3 Million Unit , Carboplatin Injection 150Mg , Carboplatin Injection 450Mg , Cisplatin Injection 10 Mg/10 Ml , Dacarbazine Injection 500 Mg , Filgrastim Injection 300Mcg/Ml , Gemcitabine Injection 200 Mg , Gemcitabine Injection 1Gm , Ifosfamide Injection 1Gm , Imatinib Tablet 400 Mg , Methotrexate Tablet Ip 10 Mg , Mitomycin C Injection 10 Mg , Oxaliplatin Injection 50 Mg , Capsule Procarbazine Hydrochloride Usp 50 Mg (Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg) , Inj Bendamustine 100 Mg , Tab Capecitabine Ip 500 Mg (Each Film Coated Tablet Contains Capecitabine Ip 500 Mg) , Tab Letrozole Usp 2.5 Mg (Each Film Coated Tablet Contains Letrozole Usp 2.5 Mg) , Capsule Temozolomide Ip 100 Mg (Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg) , Inj. Bortezomib 2Mg , Tab Abiraterone Acetate Ip 250 Mg (Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg) , Capsule Lomustine Ip 40 Mg (Each Capsule Contains Lomustine Ip 40 Mg) , Cap Thalidomide Usp 100 Mg (Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg) , Inj. Bevacizumab 400 Mg , Inj. Bevacizumab 100 Mg , Tab Cyclophosphamide Ip 50 Mg (Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg) , Tab Gefitinib Ip 250 Mg (Each Film Coated Tablet Contains Gefitinib Ip 250 Mg) , Capsule Mycophenolate Mofetil Usp 250 Mg (Each Capsule Conatin Mycophenolate Mofetil Usp 250 Mg) , Capsule Tacrolimus Ip 0.5 Mg (Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg) , Tab. Mycophenolate Sodium 360 Mg (Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg) , Tab. Bicalutamide Usp 50 Mg (Each Film Tablet Contains Bicalutamide Usp 50 Mg) , Tab. 6 Thioguanine Usp 40 Mg (Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg) , Inj Zoledronic Acid Ip 4Mg/100Ml 100Ml Size , Tab Dasatinib 100 Mg , 9. Anti Parkinsonism Drugs , Bromocriptine Mesylate Tablet 2.5 Mg , Levodopa And Carbidopa Tablet 100 Mg + 10 Mg , Levodopa And Carbidopa Tablet 250 Mg + 25Mg , Trihexyphenidyl Hydrochloride Tablet 2 Mg , 10. Drugs Affecting Blood , 10.1 Anticoagulant , Acenocoumarol Tablet 2 Mg , Enoxaparin Sodium Injection 60 Mg , Heparin Sodium Injection 5000 Iu/Ml , Warfarin Sod. Tablet 5 Mg , Inj. N Butyl Alcohol 0.26Mg/5Ml, Citric Acid 2.5Mg/5Ml And Sod. Chloride Solution 5 Ml Size , 10.2 Haemostatic , Ethamsylate Injection 250 Mg/ 2Ml , Tranexamic Acid Tablet 500 Mg , Vitamin K Injection 10 Mg/Ml , Tab Ethamsylate Bp 500 Mg (Each Uncoated Coated Tablet Contains Ethamsylate Bp 500 Mg) , Feracrylum 1% W/W Sterile Solution 100 Ml , Inj Tranexamic Acid Ip 100Mg/Ml 5Ml Size , 10.3 Drugs Used In Haemophilia , Dried Factor Viii Fraction (Iv Use) 250 Iu , Dried Factor Viii Fraction (Iv Use) 500 Iu , Dried Factor Viii Fraction (Iv Use) 1000 Iu , Factor – Ix Concentrate 600 Iu , Anti- Inhibitor Coagulation Complex [Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial 500 Iu] , Recombinant Coagulation Factor Viia - 1 Mg , Recombinant Coagulation Factor Viia - 2 Mg , Recombinant F Ix 500 Iu With Diluent , 3Rd Generation Recombinant F Viii 250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , 10.4 Drugs Used In Thalassaemia , Deferasirox Tablet 100 Mg , Deferasirox Tablet 500 Mg , Deferiprone Capsule 250 Mg , Deferiprone Capsule 500 Mg , Desferrioxamine Injection (For I.M. Inj And I.V., S.C. Infusion) 500 Mg , 10.5 Erythropoetins , Rh-Erythropoetin Injection 10000 Iu , Rh-Erythropoetin Injection 2000 Iu , Rh-Erythropoetin Injection 4000 Iu , 10.6 Plasma Expanders , Human Albumin Solution 20% , Hydroxyethyl Starch (130/4) 6% W/V With Sodium Chloride 0.9% W/V Intravenous Infusion , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , 11. Cardio Vascular Drugs , 11.1 Antiarrhythmic , Adenosine Injection 6 Mg/2Ml , Amiodarone Tablet 100 Mg , Amiodarone Tablet 200 Mg , Amiodarone Hydrochloride Injection 50 Mg/Ml , Verapamil Tablets Ip 40 Mg , 11.2 Thrombolytic , Streptokinase Injection 15 Lac Units , Urokinase Injection 5 Lac Unit , 11.3 Antiplatelet , Aspirin Delayed Release Tablet (Enteric Coated) 75 Mg , Clopidogrel Tablet Ip 75 Mg , Clopidogrel And Aspirin Tablet 75 Mg + 75 Mg , 11.4 Antihypertensive , Amlodipine Tablet Ip 2.5 Mg , Amlodipine Tablet 5 Mg , Atenolol Tablet 50 Mg , Atenolol Tablet 25 Mg , Diltiazem Tablet 30 Mg , Enalapril Maleate Tablet 10 Mg , Enalapril Maleate Tablet 5 Mg , Enalapril Maleate Tablet 2.5 Mg , Labetalol Tablet 100 Mg , Labetalol Hydrochloride Injection 20 Mg/ 4Ml , Lisinopril Tablet 2.5 Mg , Lisinopril Tablet 5 Mg , Lisinopril Tablet 10 Mg , Losartan Tablet 25 Mg , Losartan Tablet 50 Mg , Amlodipine And Enalapril Maleate Tablet 5 Mg +5Mg , Losartan Potassium & Amlodipine Tablet 50 Mg + 5Mg , Losartan Potassium & Hydrochlorothiazide Tablet 50 Mg + 12.5Mg , Amlodipine And Lisinopril Tablet 5Mg +5 Mg , Amlodipine And Atenolol Tablet 5 Mg +50 Mg , Methyldopa Tablet 250 Mg , Metoprolol Tablet Ip 25 Mg , Metoprolol Suscinate Tablet (Extended Release) Usp 50 Mg , Nifedipine Capsule 5 Mg , Nifedipine Tablet (Sustained Release) 10 Mg , Prazosin Tablet (Extended Release) 2.5 Mg , Propranolol Tablet 40 Mg , Ramipril Tablet / Capsule 2.5 Mg , Telmisartan Tablet Ip 40 Mg , Tab. Clonidine Hydrochloride Usp 0.1 Mg (Each Tablet Contains Clonidine Hydrochloride Usp 0.1 Mg) , Tab. Sotalol Hydrochloride Usp/Bp 40Mg (Each Film Coated Tablet Contains Sotalol Hydrochloride Usp/Bp 40Mg) , Inj. Esmolol Hydrochloride 10Mg/Ml 10Ml Size , Inj. Sodium Nitroprusside 25Mg/Ml 2Ml Size , Tab. Carvedilol 3.125 Mg , 11.5 Antianginal , Glyceryl Trinitrate Tablet 2.6 Mg , Isosorbide Dinitrate Tablet 5 Mg , Isosorbide Mononitrate Tablet 20 Mg , Nitroglycerin Injection 5 Mg/Ml , 11.6 Lipid Lowering , Atorvastatin Tablet 10 Mg , Atorvastatin Tablet 40 Mg , Fenofibrate Capsule 200 Mg , Tab Rosuvastatin Ip 20 Mg (Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg) , Tab Rosuvastatin 10 Mg , 11.7 Drugs Used In Heart Failure , Digoxin Injection 0.25 Mg/Ml , Digoxin Tablet 0.25 Mg , Dobutamine Injection 50 Mg/Ml , Dopamine Hydrochloride Injection 40 Mg/Ml , Isoprenaline Injection 2Mg / Ml , Tab. Sacubitril 24 Mg And Valsartan 26 Mg , 11.8 Miscellaneous , Noradrenaline Injection 2 Mg/Ml , Magnesium Sulphate Injection (50% ) 500 Mg/Ml , 12. Dental Drugs , Chlorhexidine Mouthwash Bp 0.20% , Dental Gel: Choline Salicylate + Benzalkonium + Lignocaine 8.75% , Desensitizing Tooth Gel With Sodium Mono Fluoro Phosphate & Pot. Nitrate 0.7%+ 5 % , Gum Paint Containing Tannic Acid , Cetrimide , Zinc Chloride 2%+0.1%+1% , Metronidazole And Chlorhexidine Gel 1%+ 0.25% , 13. Dermatological Drugs , 13.1 Antifungal , Miconazole Nitrate Cream 2% , Clotrimazole Mouth Paint (Clotrimazole 1% W/V) 1% , Ketoconazole Cream 2% , Powder Clotrimazole 1% W/W 30 Gm , Oint. Terbinafine 1%W/W (10 Gm Tube) , 13.2 Anti-Infective , Beclomethasone, Neomycin And Clotrimazole Cream 0.025% + 0.5% + 1% , Clindamycin Phosphate Gel Usp 1% , Fusidic Acid Cream 2% , Neomycin, Bacitracin With Sulphacetamide Powder 5Mg +250Units + 60Mg , Olopatadine Hydrochloride Ophthalmic Solution 0.1% W/V Usp (E/D) 5Ml Size , Cream Mupirocin Usp 2% (Each Gram Contains 21.5 Mg Mupirocin Calcium Usp In A Mineral Oil Cream Base) 15 Gm Size , 13.3 Topical Steroids , Betamethasone Dipropionate Cream 0.05% , Betamethasone Lotion 0.05% , Clobetasol Cream 0.05% , 13.4 Antiviral , Acyclovir Cream 5% , 13.5 Scabicides & Pediculocides , Gamma Benzene Hexachloride Lotion(Lindane Lotion Usp) 1% , Permethrin Cream 5% , Permethrin Lotion 5% , Coal Tar 6% & Salicylic Acid 3% Onitment , 13.6 Others , Glycerin Ip 100 Ml , Glycerin Ip 400 Gm , Calamine Lotion Ip , Compound Benzoic Acid Ointment Ip Benzoic Acid 6%+ Salicylic Acid 3% , Tretenoin Cream 0.03% , 14. Reagents & Diagnostic Agents , 14.1 Blood Grouping , Anti A Blood Grouping Serum (Anti A Monoclonal Serum Ip) , Anti B Blood Grouping Serum , Anti Drh Blood Grouping Serum , 14.2 Dyes & Contrast Media , Diatrizoate Meglumine And Diatrizoate Sodium Inj Usp 60% (Iodine Conc. 292 Mg/Ml) 60% , Diatrizoate Meglumine And Diatrizoate Sodium Inj Usp 76%W/V (Iodine Conc. 370 Mg/Ml) 76% , Gadodiamide Injection 0.5 Mmol/Ml , Iohexol Usp (Solution For Injection) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine/Ml. , Iohexol ( Non Ionic Contrast Medium In Sterile Aqueous Solution) 300 Mg Iodine/Ml. , 14.3 Diagnostic , Diagnostic Sticks For Multiple Use Strip (Sugar, Ketone, Albumin) , Diagnostic Stip For Sugar, Ketone , Diagnostic Stip For Sugar, Protein , Vdrl Antigen (With +Ve And -Ve Control) / Rpr Slide Kit , 15. Disinfectants & Antiseptics , Cetrimide Cream Ip 0.50% , Chlorhexidine Gluconate Solution 5% , Compound Benzoin Tincture Ip , Formaldehyde Solution (34.5% - 38%) , Gentian Violet Topical Solution Usp 1% , Glutaraldehyde Solution 2% , Hydrogen Peroxide Solution 6% , Lysol (Cresol With Soap Solution) (Cresol 50% + Soap 50%) , Povidone Iodine Solution 5% , Povidone Iodine Solution 5% , Povidone Iodine Solution 10% , Povidone Iodine Scrub Solution / Cleansing Solution 7.5% W/V Povidone Iodine 7.5% , Povidone Iodine Ointment 5% , Povidone Iodine Ointment 5% , Silver Sulphadiazine Cream 1% , Silver Sulphadiazine Cream Ip 1% , Surgical Spirit Bp , Surgical Spirit Bp , 16. Diuretics , Acetazolamide Tablet 250 Mg , Furosemide Tablet 40 Mg , Furosemide Injection 10 Mg/Ml , Hydrochlorthiazide Tablet 12.5 Mg , Hydrochlorthiazide Tablet 25 Mg , Mannitol Injection 20% , Spironolactone Tablet 25 Mg , Spironolactone Tablet 50 Mg , Torsemide Tablet 10 Mg , Torsemide Injection 10 Mg/Ml , 17. Drugs For Ear Ailments , Ciprofloxacin And Dexamethasone Ear Drops 0.3% + 0.1% , Clotrimazole 1% With Beclomethasone Dipropionate 0.025% Ear Drops , Neomycin, Polymixin B & Hydrocortisone Ear Drops/Otic Solution Usp (Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu And Hydrocortisone 10 Mg Per Ml) , Wax Dissolving Ear Drops: Paradichlorobenzene , Benzocaine , Chlorobutanol , Turpentine Oil 2% + 2.7% + 5% + 15% , 18. Gastro Intestinal Drugs , 18.1 Antacid , Antacid Tablet , Antacid Liquid , 18.2 Anti-Ulcer , Omeprazole Capsule 20 Mg , Pantoprazole Injection 40 Mg , Pantoprazole & Domperidone Sr Capsule 40 Mg+ 30 Mg , Ranitidine Hcl Injection 50 Mg/2Ml , Ranitidine Tablet 150 Mg , Ranitidine Tablet 300 Mg , 18.3 Abdominal Colic & Antispasmodic , Dicyclomine Tablet 10 Mg , Dicyclomine Injection 10 Mg/Ml , Dicyclomine Hydrochloride Oral Solution Ip10 Mg/5Ml , Dicyclomine Hydrochloride And Activated Dimethicone Suspension 10Mg + 40Mg Per Ml , Dicyclomine And Paracetamol Tablet 20Mg + 325Mg , Drotaverine Tablet 40 Mg , Drotaverine Hydrochloride Injection 40 Mg/2Ml , Drotaverine & Mefenamic Acid Tablet 80 Mg + 250 Mg , Hyoscine Butylbromide Tablet 10 Mg , Hyoscine Butylbromide Injection Ip 20 Mg/Ml , 18.4 Antiemetic , Metoclopramide Injection 10 Mg/2Ml , Metoclopramide Tablet 10 Mg , Metoclopramide Syrup 5 Mg/ 5Ml , Domperidone Tablet 10 Mg , Domperidone Oral Drops 10 Mg/ Ml , Domperidone Suspension 5 Mg/ 5Ml , Ondansetron Orally Disintegrating Md Tablet 4 Mg , Ondansetron Injection 2 Mg/Ml , Tab Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg (Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Inj Prochlorperazine Mesylate 12.5Mg/Ml 5Ml Size , 18.5 Drugs For Constipation, Diarrhoea, Piles , Bisacodyl Tablet 5 Mg , Lactic Acid Bacillus Tablet 60 Million Spores , Lactulose Solution 10Gm/15Ml , Liquid Paraffin Ip , Liquid Paraffin Ip , Loperamide Tablet Ip 2 Mg , Ors Powder , Ointment Containing : Lidocaine 3%, Zinc Oxide 5% , Hydrocortisone 0.25%, Allantoin 0.5% , Sodium Phosphates Enema Bp , Probiotic Sachets 1 Gm Size (Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores) , 18.6 Drugs For Gall Stones , Ursodeoxycholic Acid Tablet 300 Mg , 18.7 Drugs For Ulcerative Colitis , Tab. Mesalamine Usp 1.2 Gm Enteric Coated (Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm) , 19. Hormones, Other Endocrine Drugs , 19.1 Antidiabetics , Biphasic Isophane Insulin Injection 30 / 70 (30% Soluble Insulin & 70% Isophane Insulin) 40 Iu / Ml , Isophane Insulin Injection 40 Iu / Ml , Soluble Insulin Injection 40 Iu / Ml , Glibenclamide Tablet 5 Mg , Gliclazide Tablets Ip 40 Mg , Glimepiride Tablet 2 Mg , Glimepiride Tablet 1 Mg , Glipizide Tablet Ip 5 Mg , Metformin Tablet 500 Mg , Pioglitazone Tablet Ip 15 Mg , Metformin Hydrochloride Sr Tablet 1000 Mg , Glipizide And Metformin Hydrochloride Tablet 5 Mg + 500 Mg , Glibenclamide And Metformin Hydrochloride (Sr) Tablet 5 Mg + 500 Mg , Metformin Hydrochloride (Sr) And Glimepiride Tablet 500 Mg + 1 Mg , Metformin Hydrochloride (Sustained Release) And Glimepiride Tablet 500 Mg + 2 Mg , Glimepiride, Pioglitazone And Metformin Hydrochloride (Sr) Tablet 2Mg + 15Mg + 500Mg , Gliclazide And Metformin Tablet 80 Mg + 500 Mg , Insulin Glargine 100 Iu/Ml With 15 Insulin Syringes And Needles/Cartridge 100 Iu/Ml With 15 Needles And 1 Pen Per 20 Cartridges , Insulin Glargine 100 Iu/Ml With 30 Insulin Syringes With Needle , Tenaligliptin Tablet 20 Mg , 19.2 Female Hormonal Preparations , Carboprost Tromethamine Injection 0.25 Mg/Ml , Clomiphene Tablet Ip 25 Mg , Clomiphene Tablet 50 Mg , Conjugated Estrogen Tablet 0.625 Mg , Dinoprostone Cream 0.5 Mg , Ethinyloestradiol Tablet Ip 50 Mcg , Hydroxyprogesterone Injection 250 Mg/Ml , Norethisterone Tablet 5 Mg , Progesterone Injection 200 Mg /2Ml , Medroxyprogesterone Acetate Tablet Ip 10 Mg , 19.3 Thyroid & Anti-Thyroid , Carbimazole Tablet 5 Mg , Thyroxine Sodium Tablet 100 Mcg , Thyroxine Sodium Tablets Ip 50 Mcg , 19.4 Others , Glucagon Injection Usp 1 Mg/Ml , Octreotide Injection 50 Mcg/Ml , 20. Immunologicals , 20.1 Anti D Immunoglobulin , Human Anti D Immunoglobulin Injection (Im Use) 300 Mcg , Human Anti D Immunoglobulin 150 Mcg , 20.2 Anti Rabies & Anti Snake Venum , Human Rabies Immunoglobulin Injection 150 Iu/Ml , Rabies Vaccine Human (Cell Culture) (Intradermal) 2.5 Iu , Rabies Vaccine Human (Cell Culture) (Intramuscular) 2.5 Iu/ Dose , Rabies Antiserum Ip (Equine) (I.M./Sc Use) 300 Units / Ml , Snake Venom Anti Serum (Polyvalent Anti Snake Venom) Lyophillized , 20.3 Others , Normal Human Intravenous Immunoglobulin 5G/100Ml , Tetanus Immunoglobulin 250 Iu , Tetanus Vaccine (Adsorbed) Ip , Diphtheria Antitoxin 10,000 Iu , Inj. Hepatitis B Immunologlobin Ip 100 I.U , Inj. Human Immunologlobin 12%Igm, 12%Iga &76% Igg 10 Ml(0.5 Gm) , 21. Neuromuscular Blockers & Cholinesterase Inhibitors , Atracurium Injection 10 Mg/Ml , Glycopyrrolate Injection 0.2 Mg/Ml , Neostigmine Injection Ip 0.5 Mg/Ml , Neostigmine Injection 2.5 Mg/5Ml , Neostigmine Tablets Ip 15 Mg , Succinylcholine Injection 50 Mg/Ml , Valethamate Bromide Injection 8 Mg/Ml , Vecuronium Bromide For Injection 4 Mg (Freeze Dried) , Inj. Cis Atracurium Besylate 2 Mg/Ml In 5 Ml Vial , 22. Ophthalmological Preparations , 22.1 Anti Fungal , Fluconazole Eye Drops 0.3% , Acyclovir Eye Ointment Ip 3% W/W 5Gm Size , 22.2 Anti Inflammatory , Flurbiprofen Sodium Ophthalmic Solution 0.03% , 22.3 Anti Glaucoma , Betaxolol Eye Drops 0.50% , Brimonidine Tartrate And Timolol Eye Drops 0.15% + 0.5% , Phenylephrine Hydrochloride Ophthalmic Solution Usp/ Phenylephrine Eye Drops Bp 5% , Timolol Eye Drops 0.50% , Travoprost Ophthalmic Solution 0.004% , 22.4 Pupillary Dialators/Constrictors , Atropine Eye Ointment 1% , Atropine Sulphate Ophthalmic Solution Usp 1% , Homatropine Eye Drops 2% , Tropicamide Eye Drops 1% , 22.5 Antibiotic , Chloramphenicol Eye Drops 0.05% , Ciprofloxacin Eye Drops 0.30% , Ciprofloxacin Ophthalmic Ointment 0.30% , Tobramycin And Dexamethasone Ophthalmic Suspension 0.30%+0.10% , Tobramycin Eye Drops 0.30% , Tobramycin Ophthalmic Ointment 0.30% , Eye Drop Moxifloxacin 0.5% W/V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W/W Eye Ointment Ip, 3Gm Size , 22.6 Local Anaesthetic , Lidocaine Hydrochloride Topical Solution Usp 4% , 22.7 Others , Carboxymethylcellulose Sodium Lubricant Eye Drops 0.50% , Hyaluronidase Injection 1500 Iu , Hydroxypropylmethyl Cellulose Solution With Prefilled Glass Syringe With Cannula 20 Mg/Ml , 23. Drugs Acting On Uterus , Isoxsuprine Injection 5 Mg/Ml , Isoxsuprine Tablet 20 Mg , Methylergometrine Injection 0.2 Mg/Ml , Methylergometrine Tablet Ip 0.125 Mg , Misoprostol Tablet 200 Mcg , Mifepristone Tablet 200 Mg , Oxytocin Injection 5 Iu/Ml , Natural Micronisedprogesteron Soft Gelatin Capsule 200Mg (Each Soft Gelatin Capsule Containsprogesteron Ip 200Mg) , Tab Cabergoline Ip 0.5Mg (Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg) , Inj Human Chorionic Gonadotropin Ip 5000 I.U. , Leurprolide Acetate Depot 3.75 Mg , Leurprolide Acetate Depot 11.25 Mg , 24. Psychotropic Drugs , 24.1 Anti Psychotics , Chloridazepoxide Tablets Ip 10 Mg , Chlorpromazine Tablets Ip 100 Mg , Chlorpromazine Tablets Ip 25 Mg , Chlorpromazine Tablets Ip 50 Mg , Chlorpromazine Injection Ip 25 Mg/Ml , Haloperidol Injection 5 Mg/Ml , Haloperidol Tablet 1.5 Mg , Haloperidol Tablet 5 Mg , Olanzapine Tablet 5 Mg , Risperidone Tablet 2 Mg , Risperidone Tablet 1 Mg , Trifluperazine Tablets Ip 5 Mg , Quetiapine Tablet Ip 50 Mg , Quetiapine Tablet Ip 25 Mg , Tab. Levosulpiride 25 Mg (Each Uncoated Tablet Contains Levosulpiride 25 Mg) , 24.2 Anti Depressants , Amitriptyline Tablets Ip 25 Mg , Escitalopram Tablets Ip 10 Mg , Fluoxetine Capsule Ip 20 Mg , Imipramine Tablet 25 Mg , Imipramine Tablet 75 Mg , Lithium Carbonate Tablet 300 Mg , Sertraline Tablet 50 Mg , 24.3 Sedatives & Tranquilizers , Alprazolam Tablet 0.25 Mg , Alprazolam Tablet 0.5 Mg , Clonazepam Tablet 0.5 Mg , Diazepam Injection 10 Mg/ 2Ml , Diazepam Tablet 5 Mg , Lorazepam Injection 2 Mg/Ml , Tab. Lorazepam Ip 2 Mg (Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Tab. Zolpidem 5 Mg , 25. Drugs Acting On The Respiratory Tract , 25.1 Anti Asthmatic , Aminophylline Injection 25 Mg/Ml , Beclomethasone Inhalation 200 Mcg/ Dose , Budesonide Nebulizer Suspension 0.25 Mg/Ml , Budesonide Rotacap 200 Mcg , Ipratropium Bromide Nebulizer Solution 250 Mcg/Ml , Ipratropium Rotacap 40 Mcg , Salbutamol Tablet 4 Mg , Salbutamol Inhalation 100 Mcg/ Dose , Salbutamol Nebuliser Solution 5 Mg/Ml , Salbutamol Tablet 2 Mg , Salbutamol Syrup Ip 2 Mg/5Ml , Terbutaline Sulphate Tablet Ip 2.5 Mg , Theophylline And Etophylline Injection 50.6Mg + 169.4Mg , Theophylline And Etophylline Tablet 23Mg + 77Mg , Theophylline Tablet (Sr) 400 Mg , Formoterol & Budesonide Rotacap 6 Mcg+ 200 Mcg , Tab. Acebrophylline 100 Mg , 25.2 Antitussives , Cough Syrup [Each 5Ml Contains Chlorpheniramine Maleate Ip 3Mg Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg] , Dextromethorphan Hydrobromide Syrup 13.5 Mg/ 5Ml , Cough Syrup/ Expectorant (Ambroxol Hydrochloride Ip 15 Mg, Terbutaline Sulphate Ip 1.5 Mg, Guaiphenesin Ip 50 Mg, Menthol Ip 1 Mg , 25.3 Local Decongestant , Saline Nasal Solution (Drops) 0.65% , Xylometazoline Nasal Drops 0.1% , 26. Solutions Correcting Water, Electrolyte & Acid Base Disturbance , Compound Sodium Lactate Injection , Dextrose Injection 25% , Dextrose Injection 10% , Dextrose Injection 5% , Multiple Electrolytes & Dextrose Injection Type I Ip (Electrolyte P Injection ) , Multiple Electrolytes & Dextrose Injection Type Iii Ip (Electrolyte M Injection) , Potassium Chloride Injection 0.15 Gm/Ml , Potassium Chloride Oral Solution Usp 500 Mg/ 5Ml , Sodium Chloride And Dextrose Injection 0.9 % + 5 % , Sodium Chloride Injection , Sodium Chloride Injection , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W/V Polypack 500 Ml , 27.Drugs For Urology , Finasteride Tablet 5 Mg , Tamsulosin Hcl Tablet 0.4 Mg , Flavoxate Tablet 200 Mg , Tab Savelamer Carbonate 400 Mg (Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg) , Tab Sodium Bicarbonate Usp 1 Gm (Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm) , Tab Levamisol Hydrochloride Ip 50 Mg (Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg) , Tab.Phenazopyridine 5 Mg , Tab. Dutasteride 0.5 Mg , Syp. Alkylizer 1.4 Gm/5 Ml ( 100 Ml ) (Disodium Hydrogen Citrate) , 28.Antivertigo , Betahistine Tablet Ip 8 Mg , Betahistine Tablet Ip 16 Mg , Cinnarizine Tablet Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , 29. Vita.28Mins & Minerals , Ascorbic Acid Tablet 500 Mg , Calcium Gluconate Injection 10% , Calcium & Vitamin D3 Tablet 500 Mg + 250 Iu , Calcium & Vitamin D3 Suspension (Each 5 Ml Contains Calcium Carbonate Equivalentvto Elemental Calcium 250 Mg + Vitamin D3 -125 Iu) , Calcitriol Capsule 0.25 Mcg , Cholecalciferol Granules 60,000 Iu /1Gm , Ferrous Sulphate And Folic Acid Tablet 100 Mg + 0.5 Mg , Ferrous Sulphate With Folic Acid Tab.(Paediatric) 20 Mg + 0.1 Mg , Folic Acid Tablet Ip 5 Mg , Iron And Folic Acid Syrup Each 5 Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100 Mg, Folic Acid 500 Mcg , Iron Sucrose Injection 20 Mg/Ml Usp/Bp 20 Mg/Ml (For Iv Use) Each Ml Contain : Ferric Hydroxide In Comples With Sucrose Equivalent To Elemental Iron 20 Mg , Mecobalamin Injection 500 Mcg/Ml , Multivitamin Drops Each Ml Contains Vit-A-3000 Iu, Vit D3- 300Iu, Vit-B 1-1Mg, Riboflavine Phosphate Sodium- 2 Mg, D- Pantenol- 2.5 Mg, Niacinamide - 10 Mg, Pyridoxine Hcl - 1 Mg, Cyanocobalamin 1 Mcg, Lysine Hcl 10 Mg , Multivitamin Tablets Nfi Formula Sugar Coated.Vit A 2500 Iu , Pyridoxine Tablet 10 Mg , Pyridoxine Tablet 40 Mg , Thiamine Tablet 100 Mg , Vitamin A Solution 1 Lac Iu/Ml , Vitamin B Complex Tablet Nfi (Prophylactic) , Vitamin B Complex Injection Nfi , Zinc Sulphate Dispersible Ip Elemental Tablet 10 Mg , Methylcobalmin Tablet 500 Mcg , Methylcobalmin Tablet 1500 Mcg , Vitamin D3 Oral Solution 60000 Iu , Inj. Ferric Carboxymaltose 50 Mg/Ml 10 Ml Size , Multi Vitamin Syrup , Flunarizine Tablet 5 Mg , Black Disinfectant Fluid (Phenyl) (As Per Schedule O Grade - Iii , Concentrated Solution For Haemodialysis B.P Acetate Concentrate In 10 Litre Cans , Hameodialysis Bicarbonate Solution , Peritonial Dialysis Solution Ip , Sodium Bicarbonate Injection Ip 7.5% , Water For Injection Ip , Alendronate Sodium Tablets Usp/Bp 35 Mg , Mannitol With Glycerin Injection 10% + 10% , Surfactant For Intratrecheal Instillation(Natural Bovine Lung Surfactant) , Oseltamivir 75 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir 45 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir 30 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Syrup Oseltamivir Phosphate For Oral Suspension 12 Mg/Ml. (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Oseltamivir Phosphate Oral Suspension Ip 12 Mg/Ml (Each Ml Contains : 12 Mg Oseltamivir After Reconstitution , Vitamin K-1 (Phytomenadione) 1 Mg/0.5Ml Injection , Intravenous Fat Emulsion 20% W/V (Pl/Tg Ratio 0.06) 250Ml , Tab Pyridostigmine Usp 60 Mg (Each Tablet Contains Pyridostigmine Usp 60 Mg ) , Inj. Caffeine Citrate Usp 20Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml) 3Ml Size , Inj. Amino Acid 10% 100Ml Size , Cap. Vitamin E 400 Mg , Inj Poractant Alpha 80 Mg/Ml In Pack Of 1.5 Ml , List Of Surgicals , Absorbable Gelatin Sponge Ip 66, Size 80(+-10) Mm X 50 Mm X 10 Mm Should BeSterlized. , Absorbent Cotton Wool Ip 500 Gm , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set / Blood Transfusion Set• Sharp And Easy Piercing Spike Suitable For Blood Bags And Standard Bloodcontainers• Transparent Cylindrical Drip Chamber With Filter.Filter Size Should Be 200+20 Micrometer.• 150 Cm Long Smooth Kink Resistanttubing• Efficient Roller Clamp To Control And Adjust The TransfusionrateShould Conform To Is 9824(Part3):1996 , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches• Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In Apaper• Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Orless• Tensile Strength As Per En455-2• Powder Should Benon-Allergenic• Should Conform To Is13422Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches• Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In Apaper• Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Orless• Tensile Strength As Per En455-2• Should Conform To Is13422Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7 Inches• Made Of Natural Rubber Latex, Powdered,,Without Tear, Properly Folded In Apaper• Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Orless• Tensile Strength As Per En455-2• Powder Should Benon-Allergenic• Should Conform To Is13422Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 Inches• Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In Apaper• Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Orless• Tensile Strength As Per En455-2• Should Conform To Is13422Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7½ Inches• Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In Apaper• Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Orless• Tensile Strength As Per En455-2• Powder Should Benon-Allergenic• Should Conform To Is13422Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 ½ Inches• Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In Apaper• Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Orless• Tensile Strength As Per En455-2• Should Conform To Is13422Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards , Suction Catheter, Sterile. Size: Fg 5 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 6 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 8 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 10 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 12 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 14 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 16 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 18 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 20 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Suction Catheter, Sterile. Size: Fg 22 (For Use In Respiratory Tract)• Soft, Kink Resistanttubing• Rounded Open Tip With Lateraleye• Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment• Length 50 Cm(Min.)Should Conform To Is08836:2014 , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 8 Fg• Made Of Silicone Elastomer Bonded With Latex• Should Have Hard Plasticvalve• Smooth Distal End With Smooth Eyes For Atraumaticintubation• Symmetrical Foleyballoon• Balloon Capacity 3- 5Ml• Should Conform To Is 11497• Color Coding Marking To Identifysize• Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is11497.Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 For Particularsize , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size10 Fg• Made Of Silicone Elastomer Bonded With Latex• Should Have Hard Plasticvalve• Smooth Distal End With Smooth Eyes For Atraumaticintubation• Symmetrical Foleyballoon• Balloon Capacity 3- 5Ml• Should Conform To Is 11497• Color Coding Marking To Identifysize• Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is11497.Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particularsize , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size16 Fg• Made Of Silicone Elastomer Bonded With Latex• Should Have Hard Plasticvalve• Smooth Distal End With Smooth Eyes For Atraumaticintubation• Symmetrical Foleyballoon• Balloon Capacity 30 ± 1Ml• Should Conform To Is 11497• Color Coding Marking To Identifysize• Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is11497.Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particularsize , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size18 Fg• Made Of Silicone Elastomer Bonded With Latex• Should Have Hard Plasticvalve• Smooth Distal End With Smooth Eyes For Atraumaticintubation• Symmetrical Foleyballoon• Balloon Capacity30 ± 1Ml• Should Conform To Is11497• Color Coding Marking To Identifysize• Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is11497.Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particularsize , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size20 Fg• Made Of Silicone Elastomer Bonded With Latex• Should Have Hard Plasticvalve• Smooth Distal End With Smooth Eyes For Atraumaticintubation• Symmetrical Foleyballoon• Balloon Capacity30 ± 1Ml• Should Conform To Is11497• Color Coding Marking To Identifysize• Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is11497.Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particularsize , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size22 Fg• Made Of Silicone Elastomer Bonded With Latex• Should Have Hard Plasticvalve• Smooth Distal End With Smooth Eyes For Atraumaticintubation• Symmetrical Foleyballoon• Balloon Capacity30 ± 1Ml• Should Conform To Is11497• Color Coding Marking To Identifysize• Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is11497.Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particularsize , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 24 Fg• Made Of Silicone Elastomer Bonded With Latex• Should Have Hard Plasticvalve• Smooth Distal End With Smooth Eyes For Atraumaticintubation• Symmetrical Foleyballoon• Balloon Capacity30 ± 1Ml• Should Conform To Is11497• Color Coding Marking To Identifysize• Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is11497.Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particularsize , Infant Feeding Tube Size:10Fg Length 50 Cm (Min.)• Two Lateral Eyes At Distalend• Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicatemucosa• With Female Flexible Mount With In-Builtclosure• Radio OpaquelineSterile , Infant Feeding Tube Size:8Fg, Length 50 Cm (Min.)• Two Lateral Eyes At Distalend• Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicatemucosa• With Female Flexible Mount With In-Builtclosure• Radio OpaquelineSterile , Infant Feeding Tube Size:5Fg Length 50 Cm (Min.)• Two Lateral Eyes At Distalend• Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicatemucosa• With Female Flexible Mount With In-Builtclosure• Radio OpaquelineSterile , Sterile Disposable Perfusion Set With Airway And Needle (Adult Use)• For Gravity Feedonly• Sharp And Easy Piercing Spike With Airvent• Transparent And Flexible Dripchamber• 150 Cm Long Smooth Kink Resistanttubing• Self Sealing Latex Bulb Which Will Also Act As An Port For Extramedication• Efficient Roller Clamp To Control And Adjust The Fluidrate• 21 GneedleShould Conform To Is 12655 -4Standard , Sterile Disposable Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use)• Burette Type Measured Volume Chamber Of 100Ml• Drop Size Of Approx 60 Drops Perml• Injection Port,Latexfree, For Intermittentmedication.• Floating Auto Shut Off Valve (Latex Free) Inburette.• Soft And Kink Resistant Pvctubing.• Roller Controller For Flowcontrol• Tube Length 150Cm• 23GneedleShould Conform To Iso8536-5 , Sterile Disposable Infusion Set With Microdrip (I.V.)• Microdrip Infusion Set With Drop Size Reduced To Approx 60 Drops Perml• Sharp And Easy Piercingspike• Transparent And Flexible Dripchamber• 150 Cm Long Smooth Kink Resistanttubing• Efficient Roller Clamp To Control And Adjust The FluidrateShould Conform To Is 12655 - 4Standard , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conform To Is 12227 , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 16G• Should Be Packed In Transparent, Single Blisterpack.Should Conform To Is 10555Standard , Sterile Disposable (Single Use Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G• Should Be Packed In Transparent, Single Blisterpack.Should Conform To Is 10555Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 20G• Should Be Packed In Transparent, Single Blisterpack.Should Conform To Is 10555Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 22G• Should Be Packed In Transparent, Single Blisterpack.Should Conform To Is 10555Standard , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port. Size 24G• Suitable For Paediatric & Neonatal Use• Should Be Packed In Transparent, Single Blisterpack.Should Conform To Is 10555Standard , Mucus Extractor Sterile• Clear Transparentcontainer• Antibacterialfilter• Soft, Kink Resistant Pvctubing• Tube Size 10 Fg; Length 40 Cm(Min.)Capacity 25Ml , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Adult)• Soft And Kink Resistant Pvctubing• Multichannel / Star Lumen To Preventing Accidentalkinking• Twin Bores Should Ensure Equal Volume Of Oxygen To Both Airpassages• Connector For Easy Connection To The OxygensourceTube Length 200Cm , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Pediatrics)• Soft And Kink Resistant Pvctubing• Multichannel / Star Lumen To Preventing Accidentalkinking• Twin Bores Should Ensure Equal Volume Of Oxygen To Both Airpassages• Connector For Easy Connection To The OxygensourceTube Length 200Cm , Paper Adhesive Plaster 1 X 9.0 Mts (With Cutter) Non Woven AdhesiveTape,Hypoallergic,Should Have Some Stretch Bonding , Paper Adhesive Plaster 2 X 9.0 Mts (With Cutter) Non Woven Adhesive Tape Hypoallergic,Should Have Some Stretch Bonding , Paper Adhesive Plaster 3 X 9.0 Mts (With Cutter) Non Woven Adhesive Tape Hypoallergic,Should Have Some Stretch Bonding , Plaster Of Paris Bandages 15Cm X 2.7Mts / RollShould Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Plaster Of Paris Bandages 10Cm X 2.7Mts / RollShould Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 10• Soft, Kink Resistant Pvc Tubing For Atraumaticintubation• Closed Distal End Should Be Coned With Radio Opaque Material For Accurateintubation• Four Lateral Eyes For Greaterefficiency• Radio Opaqueline• Marking At 50, 60, 70 Cm Fromtip• Colour Codedfunnel• With Luer Connector /ClosureLength 105Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 12• Soft, Kink Resistant Pvc Tubing For Atraumaticintubation• Closed Distal End Should Be Coned With Radio Opaque Material For Accurateintubation• Four Lateral Eyes For Greaterefficiency• Radio Opaqueline• Marking At 50, 60, 70 Cm Fromtip• Colour Codedfunnel• With Luer Connector /ClosureLength 105Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 14• Soft, Kink Resistant Pvc Tubing For Atraumaticintubation• Closed Distal End Should Be Coned With Radio Opaque Material For Accurateintubation• Four Lateral Eyes For Greaterefficiency• Radio Opaqueline• Marking At 50, 60, 70 Cm Fromtip• Colour Codedfunnel• With Luer Connector /ClosureLength 105Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 16• Soft, Kink Resistant Pvc Tubing For Atraumaticintubation• Closed Distal End Should Be Coned With Radio Opaque Material For Accurateintubation• Four Lateral Eyes For Greaterefficiency• Radio Opaqueline• Marking At 50, 60, 70 Cm Fromtip• Colour Codedfunnel• With Luer Connector /ClosureLength 105Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 18• Soft, Kink Resistant Pvc Tubing For Atraumaticintubation• Closed Distal End Should Be Coned With Radio Opaque Material For Accurateintubation• Four Lateral Eyes For Greaterefficiency• Radio Opaqueline• Marking At 50, 60, 70 Cm Fromtip• Colour Codedfunnel• With Luer Connector /ClosureLength 105Cm , Scalp Vein Set (Disposable): Size 18G• Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colourcoded• Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation• Female Luer Fitting At One End• Soft, Kink Resistant, Non-Toxic, Non IrritanttubeSterile , Scalp Vein Set (Disposable): Size 20G• Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colourcoded• Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation• Female Luer Fitting At One End• Soft, Kink Resistant, Non-Toxic, Non IrritanttubeSterile , Scalp Vein Set (Disposable): Size 22G• Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colourcoded• Needle Should Be Bevelled, Siliconised And Should Ensure Atraumaticcannulation• Female Luer Fitting At One End• Soft, Kink Resistant, Non-Toxic, Non IrritanttubeSterile , Scalp Vein Set (Disposable): Size 24G• Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colourcoded• Needle Should Be Bevelled, Siliconised And Should Ensure Atraumaticcannulation• Female Luer Fitting At One End• Soft, Kink Resistant, Non-Toxic, Non IrritanttubeSterile , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 2 Ml• Clear Transparentchamber• Prominentgraduation• Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Backflow• Sharp Needle Ensuring Minimum Trauma Duringpenetration• Shall Conform To Is12050• Packing: Needle Should Be Attached With The Syringe And Packed In Unit RibbonpackThe Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 5 Ml• Clear Transparentchamber• Prominentgraduation• Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Backflow• Sharp Needle Ensuring Minimum Trauma Duringpenetration• Shall Conform To Is12050• Packing: Needle Should Be Attached With The Syringe And Packed In Unit RibbonpackThe Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 10 Ml• Clear Transparentchamber• Prominentgraduation• Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Backflow• Sharp Needle Ensuring Minimum Trauma Duringpenetration• Shall Conform To Is12050• Packing: Needle Should Be Attached With The Syringe And Packed In Unit RibbonpackThe Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 20 Ml• Clear Transparentchamber• Prominentgraduation• Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Backflow• Sharp Needle Ensuring Minimum Trauma Duringpenetration• Shall Conform To Is12050• Packing: Needle Should Be Attached With The Syringe And Packed In Unit RibbonpackThe Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Surgical Blade Sterile, Size11• Single Peel Pack In Metalfoil• The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion.Should Conform To Is 3319 , Surgical Blade Sterile, Size15• Single Peel Pack In Metalfoil• The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion.Should Conform To Is 3319 , Surgical Blade Sterile, Size22• Single Peel Pack In Metalfoil• The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion.Should Conform To Is 3319 , Suture Needles Curved 1/2 Circle Round Body Assorted Size 11-15• It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Itspoint.• Type Of Eye Of The Needle Should Bementioned.Should Conform Tois-9165 , Suture Needles Curved 1/2 Circle Round Body Assorted Size 1-5• It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Itspoint.• Type Of Eye Of The Needle Should Bementioned.Should Conform Tois-9165 , Suture Needles Curved 1/2 Circle Round Body Assorted Size 16-20• It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Itspoint.• Type Of Eye Of The Needle Should Bementioned.Should Conform Tois-9165 , Suture Needles Curved 1/2 Circle Round Body Assorted Size 6-10• It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Itspoint.• Type Of Eye Of The Needle Should Bementioned.Should Conform Tois-9165 , Suture Needles Curved And Cutting 1/2 Circle Cutting Size 6-10• It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Itspoint.• Type Of Eye Of The Needle Should Bementioned.Should Conform Tois-9165 , Suture Needles Curved And Cutting 1/2 Circle Size 11-15• It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Itspoint.• Type Of Eye Of The Needle Should Bementioned.Should Conform Tois-9165 , Suture Needles Curved And Cutting 1/2 Circle Size 16-20• It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Itspoint.• Type Of Eye Of The Needle Should Bementioned.Should Conform Tois-9165 , Suture Needles Curved And Cutting Size 1-5• It Should Be Mentioned Whether Needle Is Pointed Or Blunt With Type Of Itspoint.• Type Of Eye Of The Needle Should Bementioned.Should Conform Tois-9165 , Sterile Disposable Spinal Needle For Single Use 22G X 3 ½ Inch• Clear / TransparenthubSharp Tip Which Should Ensure Minimal Puncturetrauma , Sterile Disposable Spinal Needle For Single Use 25G X 3 ½ Inch• Clear / TransparenthubSharp Tip Which Should Ensure Minimal Puncturetrauma , Urine Collecting Bag, Disposable 2000 Ml• Transparentsheet• Kink Resistant Flexible Tubing Not Less Than 90 Cm Inlength• Should Have Non-Returnvalve• Top Drainageoutlet• GraduatedbagMoulded Handle For Easyhandling , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm• RadioopaqueShould Be Of Inert Material, Non- Irritant Totissue , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm• RadioopaqueShould Be Of Inert Material, Non- Irritant Totissue , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm• RadioopaqueShould Be Of Inert Material, Non- Irritant Totissue , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm• RadioopaqueShould Be Of Inert Material, Non- Irritant Totissue , Endotracheal Tube, Plain - Size 2.5Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 3Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 3.5Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 4Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 4.5Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 5Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 5.5Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain With Radio-Opaque Line, Sterile, Single Use - Size 6Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 6.5Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 7Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 7.5Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 8Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Plain - Size 8.5Mm• Transparent• Standard 15 Mm Connector At Proximalend• Radio-Opaque Line Throughout Thelength• Tip Suitable For Nasal And OralintubationSingle Use,Sterile , Endotracheal Tube, Cuffed - Size 4Mm• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size 4.5Mm• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size 5Mm• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size 6Mm• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size 6.5Mm• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size 7Mm• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size 7.5• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size8• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size 8.5• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Endotracheal Tube, Cuff - Size9• Soft Cuff Towards The Distalend• Kink Resistant Inflationtube• Murphy Eye At Distal End With Polishedsmoothness• Radio-Opaque Line• Standard 15 Mmconnector• Sterile, SingleuseCurved Shaped Blister Pack – Suiting The Shape Ofproduct , Tracheostomy Tube (Pvc), Plain, Sterile, Single Use - All Sizes• Soft Flexible Flange At For Easyfixation• 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degreedirection• Non-IrritantRadio-Opaque Line , Tracheostomy Tube (Pvc), Cuffed, Sterile, Single Use - All Sizes• Soft Flexible Flange At For Easyfixation• 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degreedirection• Non-Irritant• Radio-Opaque LineBalloon With Non Returnvalve , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 24)• Graduatedbag• Should Have Well Fittingcap• Soft Drainage Catheter 50 Cm Long, With Radio Opaqueline• Rounded Open Distal End With Smooth Atraumatic Eyes IncatheterCatheter With Markings At 2 Cminterval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 28)• Graduatedbag• Should Have Well Fittingcap• Soft Drainage Catheter 50 Cm Long, With Radio Opaqueline• Rounded Open Distal End With Smooth Atraumatic Eyes IncatheterCatheter With Markings At 2 Cminterval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 32)• Graduatedbag• Should Have Well Fittingcap• Soft Drainage Catheter 50 Cm Long, With Radio Opaqueline• Rounded Open Distal End With Smooth Atraumatic Eyes IncatheterCatheter With Markings At 2 Cminterval , Corrugated Drainage Sheet, Sterile, Multichannel, With Radio Opaque Line, Single Use -All Sizes , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.5 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Sterilised Umbilical Cotton Tape Width 3 Mm, Length 75 Cm Should Conform To Schedule F(Iii) Of Drug And Cosmetic Act 1940 , Bone Wax Sterilised , Temporary Cardiac Pacing Wire (Electrode) Sterile ½ Cir, Tapercut, 26 Mm; Straight Cutting 60 Mm ,Breakaway , Skin Graft Knife Blade (Sterile) (Disposable )Skin Grafting Knife Blade (Sterile) Made Of Carbon Steel Or Stainless Steel Material 158 Mm Long Individually Wrapped In Wrapper Corrosion Inhibitor Paper In Single Packet,.In Packs Of 10. The Edge Must Be Sharp Enough To Cut The Skin In A Single Shave And Should Snugly Fit In The Handle Should Conform To Is 3759.2. Skin Grafting Knife Handle (Watson Modification Of Humby’S Knife ) Stainless Steel, Ce Certified, In Which The Blade Specified In (A) Above Should Fit Snugly. Should Conform To 7980-1976. , K Wire, Length 375 Mm; 1MmLength Of Wire Should Be Mentioned With Specification. Should Conform To Is 8261 , K Wire, Length 375 Mm;1.6Mm• Length Of Wire Should Be Mentioned Withspecification.Should Conform To Is8261 , K Wire, Length 375 Mm; Size 1.8Mm• Length Of Wire Should Be Mentioned Withspecification.Should Conform To Is8261 , Face Mask, Disposable• Should Be Manufactured From Non Woven Poly Propfabric• Should Be 3 Plyconstruction• Should Have High Bacterial Filtrationefficiency• Should Be Heat Sealed To Keep 3 Layerstogether• Standard Size 17.5 X9cm• Color Green/Blue• There Should Be A String Each At All Four Corners,Length Of String Should Be40cm• Nose Clip Should BethereNo Elasticband. , Surgical Cap, Disposable (For Surgeons)• Should Be Manufactured From Non Wovenfabric.• Strip For Tying The Cap Stitched On The Back For Proper Grip On Theforhead.• Greencolour• Ultrasonicallystitched• Air Permeable/Breathable• Should Retain Skin And Hairparticle.Strip For Tying The Cap , Surgical Cap, Disposable ( For Nurses)• Should Be Manufactured From Non Wovenfabric• Blue / Greencolour• Round Upon Wearing, Withelastic• Air Permeable /BreathableShould Retain Skin And Hairparticles , Foldable Intra Ocular Lense With Injector (Size + 11 D To +17.5 D)Size:6Mm Optics. 12-13Mm Total Diameter1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter.4. Modified C Loop Haptic/Plate Haptics(5. Iol Should Have Uv Blockingcapability6. Iol Should Have 360°Square Edge..7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smallerincision8. Diopters- + 11 D To +17.5 D At 0.5 Dstep.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fdacertified. , Foldable Intra Ocular Lense With Injector (Size + 18 D To + 24 D)Size:6Mm Optics. 12-13Mm Total Diameter1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter.4. Modified C Loop Haptic/Platehaptics5. Iol Should Have Uv Blockingcapability6. Iol Should Have 360°Square Edge..7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smallerincision8. Diopters- + 18 D To + 24 D At 0.5 Dstep.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fdacertified. , Foldable Intra Ocular Lense With Injector (Size + 24.5 D To + 28.5 D )Size:6Mm Optics. 12-13Mm Total Diameter1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter.4. Modified C Loop Haptic/Platehaptics5. Iol Should Have Uv Blockingcapability6. Iol Should Have 360°Square Edge..7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smallerincision8. Diopters- + 24.5 D To + 28.5 D At 0.5 Dstep.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fdacertified. , Standard Pmma Intra Ocular Lenses (Size + 11 D To +17.5 D)• 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter,Biconvex1. Pmma Optics And Haptics Single Piece Withhole2. 6Mm Optic Size 12.5 To 13Mm Total Diameter,Biconvex3. Iol Haptics – Modified C Shaped With 5° -10° Anteriorangulation.4. Should Have 360° Squareedges.5. Iol Should Have Uv Blockingcapability6. Diopters- + 11 D To +17.5 D At 0.5 Dstep.7.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fdacertified , Standard Pmma Intra Ocular Lenses (Size + 18 D To + 24 D)• 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter,Biconvex1. Pmma Optics And Haptics Single Piece Withhole2. 6Mm Optic Size 12.5 To 13Mm Total Diameter,Biconvex3. Iol Haptics – Modified C Shaped With 5° -10° Anteriorangulation.4. Should Have 360° Squareedges.5. Iol Should Have Uv Blockingcapability6. Diopters- + 18 D To + 24 D At 0.5 Dstep.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fdacertified , Standard Pmma Intra Ocular Lenses (Size + 24.5 D To + 28.5 D ) 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex1. Pmma Optics And Haptics Single Piece Withhole2. 6Mm Optic Size 12.5 To 13Mm Total Diameter,Bioconvex3. Iol Haptics – Modified C Shaped With 5° -10° Anteriorangulation.4. Should Have 360° Squareedges.5. Iol Should Have Uv Blockingcapability6. Diopters- + 24.5 D To + 28.5 D At 0.5 Dstep.Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fdacertified. , Disposable Sterile Surgical Rubber Gloves Size 8 Inches• Made Of Natural Rubber Latex Powdered,Without Tear,Properly Folded In Apaper• Should Conform To Is 13422• Isi Marked/Ce Certified/FdaapprovedColour Code Marking To Designatesize , Disposable Sterile Surgical Rubber Gloves Size 8 Inches• Made Of Natural Rubber Latex Powder Free,Without Tear,Properly Folded In Apaper• Should Conform To Is 13422• Isi Marked/Ce Certified/FdaapprovedColour Code Marking To Designatesize , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Extra Small. Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Small Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Medium Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Large Should Conform To Is 15354 , Pressure Monitoring Line / High Pressure Extension Line• Suitable For High Pressure Monitoring And For Connection Between Syringe Infusion Pump Andpatient• Male Luer Lock At One End And Female Luer Lock At Other End ; Should Fit All Standard Equipment. Luer Lock Connectors Should Provide Securefitting.• Pressure Upto 800 Psi• Length 200CmSterile , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml• Should Have Suitability For Both Male And Femalepatients• Should Be Provided With Adhesive For Fixation And Good Grip With Minimal Risk Of Allergy Andinjury• Capacity 100MlSterile , Umbilical Catheter (For New Born) All Sizes• Radio Opaqueline• With Female Flexiblemount• Colour Codedconnector• Open Tip Should Be Soft, Rounded,AtraumaticLength 40Cm , Umbilical Cord Clamp• Suitable For Clamping Umbilical Cord Of Newborn• Security Lock To Prevent Accidental Opening AfterclampingGrooved Clamping Area , Absorbable Oxidized Regenerated Cellulose Net Size 2”X 3” With Surgical Sponge Topical Absorbable HaemostaticBactericidal Property , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit)• Option To Use One Or Two Catheterssimultaneously• Bellow Chamber With Capacity 800Ml• Bellow Unit Withconnector• Graduatedbellow• Connecting Tube With Clamp And“Y”Connector• Curved Needle / Trocar Withcatheter• Multiperforated Catheter / Radon Drain With Radio OpaquelineCatheter 16Fg , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit)• Option To Use One Or Two Catheterssimultaneously• Bellow Chamber With Capacity 800Ml• Bellow Unit Withconnector• Graduatedbellow• Connecting Tube With Clamp And“Y”Connector• Curved Needle / Trocar Withcatheter• Multiperforated Catheter / Radon Drain With Radio OpaquelineCatheter 18Fg , T – Tube For Common Bile Duct Drainage• Kehr’S T Tube Made From Medical Grade Pvc, Andsiliconized• Smooth, Kink Resistant• Radio Opaque Line Throughout Thelength• Sterile• Length 20 X 60CmSize 10 To 18Fg , Bone Cement With Antibiotics,Fast And Slow Setting , Sanitary Napkin, Beltless1. Covering – Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non- Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of Thebarrier.2. Absorbent Filler – The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material,Etc.3. Back Strip – A Back Strip For Sticking The Sanitary Napkin Onto The Underwear Should Be There Using Good Quality Adhesivematerial.4. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm)Absorbentsection TotalPad Length 210+_10 230 +_10Width 60To 75 70 To85Thickness 8 +_2Weight : Not More Than 10 Gm . . Instruction For Usage Should Be Mentioned On Every Packet , Sanitary Napkin, Belttype1. Covering – Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non- Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of Thebarrier.2. Absorbent Filler – The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material,Etc3. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm)Absorbent SectionPadlength 220 +_10Width 70 +_5Thickness 17 +_34. Weight : 12 +_ 3Gm5. Pack – Six Napkins In Apack.6. Elastic Belt With Loops Shall Be Provided In Eachpack.Absorbency: The Napkin Should Be Able To Absorb Not Less Than 30 Ml Of Normal Saline Or Coloured Water Or Test Fluid When Poured On To The Centre Of The Napkin At The Rate Of 15 Ml Per Minute. .Instruction For Usage Should Be Mentioned On Everypacket. , Belt-Less Sanitary Napkin With Wings1. Covering (Absorbing Top Sheet Corrector)–Good Quality Knitted Sleeve Or Non Woven Fabric Of Rash Free,Non Irritant And Soft To Touch Material Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet Absorbency Requirements.The Napkins Shall Have A Non Absorbent Barrier On One Side With Adhesive Covered By A Differently Identifiable Paper2. Overalllength (Mm) 230 ±53. Core Length 220 Mm±104. Fluffcore/Pad Length 220 Mm±105. Over All Widthwithwings 160Mm+_5 6.Fluffcore/Pad Length 70 Mm± 5 7.Thickness Of Asinglepad9-10Mm8. Weight Of A Singlepad: 8-10Gm9. Pack Six Napkins In Apack.10Type.- Belt-Less Sanitarynapkinwith Wings11. Minimumabsorbency: 50Ml 12.Ph Value Of Absorbent Material6-8.5B. Disposable Individual Pouch Or Wrapper For Each Sanitary Napkin(As Per Ministry Of Environment,Forest And Climate Change Dated 08.04.2016)Pouch/Wrapper Specifications :-1. Pouch/Wrapper Should Be Of The Size Of Sanitary Napkin Beingsupplied.2. It Should Have Adhesive To Seal The Sanitary Napkinswithin.3. Pouch/Wrapper Should Not Betransparent.Note : Instructions For Use Of Disposable Pouch/Wrapper Mst Be Written In Hindi On , Oxygen Mask (Adult)• Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area• Friendly Soft Medical Pvc Material With Comfortablefitting.• Aluminium Nasal Clip Provides Betterfixation.• Anatomical Design Provides Lighterseal.Latex Free Elastic Strapavailable. , Oxygen Mask (Paediatric)• Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area• Friendly Soft Medical Pvc Material With Comfortable Fitting.• Aluminium Nasal Clip Provides Betterfixation.• Anatomical Design Provides Lighterseal.• Latex Free Elastic Strapavailable.Mask Connector4m , Sterile Catheter, Single Use, For Urinary Drainage(Foley Baloon Catheter), 2 Way, Size 14• Made Of Silicone Elastomer Bonded With Latex• Should Have Hard Plasticvalve• Smooth Distal End With Smooth Eyes For A Traumaticintubation• Symmetrical Foleyballoon• Balloon Capacity 30+- 1 Ml• Should Conform To Is11497• Color Coding Marking To Identifysize• Length, Wall Thickness And Ballon Capacity Should Be Mentioned As Per Is11497Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 , Nelaton - Catheter Size 14 FgDistal End Is Close And Proximal End Has Female Colour Code Connector• Soft, Kink Resistant Medical Grade Pvctube• Length:40CmIndividually Packed In Poly Andsterile , Ecg ElectrodeReliable Trace, •High Conductivity,• Easy Tohandle , Surgical Blade Sterile, Size23• Single Peel Pack In Metalfoil• The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion.Should Conform To Is 3319 , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml• Clear Transparentchamber• Prominentgraduation• Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Backflow• Sharp Needle Ensuring Minimum Trauma Duringpenetration• Shall Conform To Is12050• Packing: Needle Should Be Attached With The Syringe And Packed In Unit RibbonpackThe Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Urethral Catheter 90 (Fg-14), Made Up Of Medical Grade Pvc , Urethral Catheter 91 (Fg-10), Made Up Of Medical Grade Pvc , Vaccum Suction Set, 2.5 Meter Length,• Suction Handle With SuctiontubeSterile,• Pyrogenic Free, •Latex Free,• Singleuse , Epidural Minipack 18G, 90 Mm, Metal Stylet For Single Use Only, •Sterile,• Epidural Catheter 20G, L 90Cm,• 6 Lateral Holes Closedend,• Borstadapter• Epidural Catheter Flat Filter 0.2 MicrometerThread Assist Guide•Lor (Loss Of Resistance) Plastic Syringe 6Ml , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm (Longline Iv.) , 3 Way Stop Cock , Non Pyrogenic & Single Use, Should Be Leak Proof, With Smooth Movements , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 10 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 50 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 100 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 150 Cm (Non Pyrogenic & Single Use) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16)• Graduatedbag,• Should Have Well Fittingcap• Soft Drainage Catheter 50 Cm Long, With Radio Opaqueline• Rounded Open Distal End With Smooth Atraumatic Eyes IncatheterCatheter With Markings At 2 Cminterval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20)• Graduatedbag• Should Have Well Fittingcap• Soft Drainage Catheter 50 Cm Long, With Radio Opaqueline• Rounded Open Distal End With Smooth Atraumatic Eyes IncatheterCatheter With Markings At 2 Cminterval , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Elastic Adhesive Bandage Bp 1M X 10CmAdhesive Material Should Have Good Quality Sticking Property, Non-Allergic , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G• Should Be Packed In Transparent Single Blisterpack• Should Confirm To Is 10555Standard(Neonatal Iv Cannula Size26) , Niv Mask (Noninvasive Ventilation Mask) Adult• Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Largesize.• Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear.• Should Be Single Use For Ventilator WithoutventNon Allergic, Leak Proof, Contour Should Bemaintained , Niv Mask (Noninvasive Ventilation Mask) Adult• Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Mediumsize.• Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear.• Should Be Single Use For Ventilator WithoutventNon Allergic, Leak Proof, Contour Should Bemaintained , Niv Mask (Noninvasive Ventilation Mask) Adult• Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Largesize.• Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear.• Should Be Single Use For Bipap WithventNon Allergic, Leak Proof, Contour Should Bemaintained , Niv Mask (Noninvasive Ventilation Mask) Adult• Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Mediumsize.• Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear.• Should Be Single Use For Bipap WithventNon Allergic, Leak Proof, Contour Should Bemaintained , Niv Mask (Noninvasive Ventilation Mask) Paediatric• Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads In Smallsize.• Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear• Should Be Single Use With Bronchoscopy And Co2 &O2 Port With ChinsupportNon Allergic, Leak Proof, Contour Should Bemaintained , Nebulization Mask Adult , Nebulization Mask Paediatric , Chemotherapy Port &Non-Coring Needles(Adult)• Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Port With Small Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio- Opaque Ring. 8Fr With Silicon Material With Peel Apart Percutaneous Introducersystem.Chemo Port Huber Needle 20G And22g , Chemotherapy Port &Non-Coring Needles(Pediatric)• Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Power Port With Large Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio- Opaque Ring. 6Fr With Silicon Material With Peel Apart Percutaneous Introducersystem.Chemo Port Huber Needle 20G And22g , List Of Sutures , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (3/8 Cir Rb Needle 40Mm Length 76 Cm), Size- ,1/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 20Mm Length 76 Cm), Size- ,3/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm), Size- ,2/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm), Size- ,1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 40Mm Length 76 Cm), Size- ,1/0 , Absorbablesurgicalsuture(Sterilecatgut),Bp/Uspneedledsuturechromic(3/8Rb Needle 30Mm Length 76 Cm), Size- ,2/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (1/2 Cir R Needle 45 Mm Length 100 Cm), Size- ,1 , Absorbablesurgicalsuture(Sterilecatgut),Needledsuturechromic(3/8Cirrcuttingneedle 26Mm, Length 76 Cm), Size- ,3/0 , Absorbablesurgicalsuture(Synthetic)Sterilisedsurgicalneedledsuture(Braided)Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)½Cirrbneedle20mmlength 70 Cm, Size- ,3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)1/2Cirrbneedle30mmlength 90 Cm, Size- ,2/0 , Absorbablesurgicalsuture(Synthetic)Sterilisedsurgicalneedledsuture(Braided)Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)1/2Cirrbneedle30mm Length75- 90 Cm, Size- ,1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)1/2Cirtapercutneedle(Heavy) 35-40Mm Length 75-90 Cm, Size- ,1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)½Cirrbneedle40mmlength90 Cm, Size- ,1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)(1/2Circonventional25mm Length 90Cm)Undyed, Size- ,3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)(1/2Cirrbneedle20mmlength 70 Cm), Size- ,4/0 , Absorbablesurgicalsuture(Synthetic)Sterilisedsurgicalneedledsuture(Braided)Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)(1/2Cirrbneedle40mm Length 90 Cm, Size- ,2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)(1/2Cirrbneedle40mmlength 90 Cm), Size- ,1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)3/8Circlecuttingneedle22mm Length 45 Cm, Size- ,3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin/Polyglycolicacid/Poly(Glycolide-Co-L-Lactide)3/8Circlecutting16mmneedle, Suture Length 70Cm, Size- ,4/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Black Braided Silk (1/2 Cir Rb Needle 20Mm, Length 76 Cm), Size- ,3/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Black Braided Silk (3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm), Size- ,3/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Black Braided Silk (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm), Size- ,2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm), Size- ,8/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 16 Mm Length 70 Cm), Size- ,3/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.), Size- ,4/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Polyamide Monofilament Black (Nylon) (3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm), Size- ,5/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Polyamidemonofilamentblack(Nylon)(3/8Cirrcuttingneedle40-45Mm Length 60-70 Cm.), Size- ,2/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Polyamidemonofilamentblack(Nylon)(3/8Cirrcuttingneedle45mmlength 70Cm.), Size- ,1/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirrb13mmneedle,Length75cm) Double Arm, Size- ,5/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(3/8Cirrb16mmneedle,Length90cm), Size- ,6/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilament Polypropylene Blue (3/8Cir Rb Double 8Mm Needle, Length 60 Cm), Size- ,7/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(3/8Cirrb16mmneedle,Length70cm), Size- ,5/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirrbneedle30mmlength90cm), Size- ,1/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirrbheavyneedle40-45Mmlength 75-90Cm), Size- ,1 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirtapercutdoubleneedlecuttingsize16- 17Mm Length 70-90Cm), Size- ,5/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle 17Mm Length 70-90 Cm), Size- ,4/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirrbneedle25mm,Length90cm) Double Arm, Size- ,3/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirrbneedle30mm,Length90cm), Size- ,2/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm, Size- ,3/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirtapercutneedle,25Mmlength90 Cm) Doublearm, Size- ,2/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblueusp(3/8Circonventionalcuttingpc- 3Needle 15Mm Length60cm), Size- ,6/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(3/8Cirrb13mmneedle,Length90cm Double Arm, Size- ,6/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 16 Mm Length 70 Cm), Size- ,4/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilament Polypropylene Blue (3/8 Cir Cutting Needle 25Mm Length 45 Cm), Size- ,3/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirrbheavy40mm,Length90cm), Size- ,1 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(L/2Cirreversecutting,45Mmneedlelength 100Cm), Size- ,1 , Non Absorbable Surgical Suture, ,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm), Size- ,8/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Circletapercut13mmdoubleneedle 70Cm), Size- ,4/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilament Polypropylene Blue (1/2 Circle Cc 13Mm Needle, Suture Length Of 70Cm) Double Arm, Size- ,5/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Circletapercutneedle17mmsuture Length Of 90Cm) Doublearm, Size- ,2/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Monofilamentpolypropyleneblue(1/2Cirrbneedle25mm,Suturelengthof 75Cm) Doublearm, Size- ,3/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Braidedcoatedpolyster,Green/Whiteorblue/White Polybutylate/Silicon Coatedpolysterbraidedgreen/Blue(1/2Cirtapercut,17Mmdoubleneedle,Length75cm), Size- ,4/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Braidedcoatedpolyster,Green/Whiteorblue/White Polybutylate/Silicon Coatedpolysterbraidedwhite(1/2Cirtapercut,17Mmdoubleneedle,Length90cm), Size- ,2/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Braidedcoatedpolyster,Green/Whiteorblue/Whitepolybutylate/Silicon Coatedpolysterbraidedgreen/Blue(1/2Cirtapercut,17Mmdoubleneedle,Length90cm), Size- ,2/0 , Nonabsorbablesurgicalsuturesterilizedsurgicalneedledsuturepolybutylate/Siliconcoated Withpolysterbraided(Green/Blue)1/2Circletapercut,17Mmdoublearmedneedle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm, Size- ,2/0 , Nonabsorbablesurgicalsuturesterilizedsurgicalneedledsuturepolybutylate/Siliconcoated Withpolysterbraided(Green/Blue)*With1/2Circletapercut,25Mmdoublearmedneedle, Suture Length Of 90Cm With Pledgets Size 6 X 3 Xl.5Mm, Size- ,2/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Braided Coated Polyster,Green/White Or Blue/White Coatedpolyster Braided (Green / Blue) With 1/2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm, Size- ,3/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglecaprone/Polyglyconate,Monofilamentsutures(1/2Circleovalrb Needle 26Mm Needle, Suture Length Of70cm), Size- ,2/0 , Absorbable Surgical Sutures Polyglecaprone / Polyglyconate, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 26Mm, Suture Length 70Cm), Size- ,3/0 , Absorbable Surgical Sutures Monofilament Sutures Polyglecaprone /Polyglyconate (L/2 Circle Cutting 16Mm Needle,Suture Length 70Cm), Size- ,4/0 , Absorbable Surgical Sutures Polyglecaprone / Polyglyconate, Monofilament Sutures (3/8 Circle Cutting24- 26Mm Needle, Suture Length Of 70- 90Cm), Size- ,3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Reverse Cutting 40-50 Mm Length 70- 90Cm), Size- ,1 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 31Mm Needle, Length 70Cm), Size- ,2/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 30Mm Needle, Length 70Cm), Size- ,1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied40mm, Gs Needle, Suture Length 90 Cm/, Size- ,1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm, Size- ,1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm/, Size- ,2/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm, Size- ,1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acidviolet)1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm/, Size- ,1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needledsuture (Braided Coated Polyglactin / Polyglycolic Acidviolet) 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm, Size- ,3/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm, Size- ,3/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Polyamidemonofilamentblack(Nylon)(3/8Cuttingspatulatededgeneedle, Double Arm Needle 6 Mm, Suture Length 30-42Cm, Size- ,10/0 , Absorbablesurgicalsuture(Sterilecatgut),Needledsuturechromic(3/8Cirrcuttingneedle 16Mm, Length 76 Cm), Size- ,5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Cutting Needle 8Mm, Length 35 Cm), Size- ,6/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 20Mm, Length 76 Cm), Size- ,4/0 , Nonabsorbablesurgicalsuture,Sterilisedsurgicalneedledsuture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 16Mm, Length 76 Cm), Size- ,5/0 , Absorbablesurgicalsuture(Sterilecatgut),Needledsuturechromic(3/8Cirrcuttingneedle 19Mm Length 76 Cm), Size- ,4/0
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
22.
Health and Family Welfare #8782580 Technical Bid
E-Tender For Rate Contract For Supply Of Medicines And Surgical Items S . K . Hospital , Sikar.- 1 Essential Medicine List For Tender 2020-21 2 1.001 1. Anaesthetics 3 1.002 1.1 General Anaesthetics 4 1.003 6- Halothane, 250 Ml Bottle Item1 1 250 Ml Bottle 5 1.004 7- Isoflurane, 100 Ml Item2 1 100 Ml 6 1.005 8- Ketamine Injection 50 Mg / Ml, 10 Ml Vial Item3 1 10 Ml Vial 7 1.006 14- Propofol Injection 10 Mg / Ml, 20 Ml Item4 1 20 Ml 8 1.007 15- Thiopentone Injection 0.5 G, Vial Item5 1 Vial 9 1.008 491- Sevoflurane, 250 Ml Item6 1 250 Ml 10 1.009 1.2 Local Anaesthetics 11 1.01 9- Lignocaine Ointment 5%, 10 Gm Item8 1 10 Gm 12 1.011 12- Lignocaine Gel 2%, 30 Gm Item9 1 30 Gm 13 1.012 13- Lignocaine Injection 2%, 30 Ml Vial Item10 1 30 Ml Vial 14 1.013 10- Lignocaine And Adrenaline Injection 20Mg + 0.01Mg, 30 Ml Vial Item11 1 30 Ml Vial 15 1.014 11- Lignocaine And Dextrose Injection 50Mg + 75Mg Per Ml, 2 Ml Amp Item12 1 2 Ml Amp 16 1.015 2- Bupivacaine Hydrochloride In Dextrose Injection N5mg + 80Mg Per Ml, 4 Ml Amp Item13 1 4 Ml Amp 17 1.016 4- Bupivacaine Injection 0.50%, 20 Ml Vial Item14 1 20 Ml Vial 18 1.017 1.3 Pre-Operative Medication 19 1.018 654- Atropine Sulphate Injection 1 Mg / Ml, 1 Ml Amp Item16 1 1 Ml Amp 20 1.019 313- Midazolam Injection 1 Mg / Ml, 5 Ml Vial Item17 1 5 Ml Vial 21 1.02 2. Analgesic, Antipyretic & Anti-Inflammatory Drugs 22 1.021 2.1 Opioid Analgesics 23 1.022 25- Morphine Sulphate Injection 10 Mg / Ml, 1 Ml Amp Item20 1 1 Ml Amp 24 1.023 32- Tramadol Capsule 50 Mg, 10 Cap Item21 1 10 Cap 25 1.024 33- Tramadol Injection 50 Mg / Ml, 2 Ml Amp Item22 1 2 Ml Amp 26 1.025 30- Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) , 1 Ml Amp Item23 1 1 Ml Amp 27 1.026 21- Fentanyl Citrate Injection 50 Mcg / Ml, 2 Ml Amp Item24 1 2 Ml Amp 28 1.027 655- Fentanyl Citrate Injection 50 Mcg / Ml, 10 Ml Amp Item25 1 10 Ml Amp 29 1.028 656- Naproxen Tablet 500Mg, 10 Tab Item26 1 10 Tab 30 1.029 657- Naproxen Tablet 250Mg, 10 Tab Item27 1 10 Tab 31 1.03 2.2 Non-Steroidal Anti Inflammatory Drugs & Antipyretics 32 1.031 679- Aspirin Tablet 150 Mg, 10 Tab Item29 1 10 Tab 33 1.032 492- Aceclofenac And Paracetamol Tablet 100 Mg + 325 Mg, 10 Tab Item30 1 10 Tab 34 1.033 493- Diclofenac Gel: Diclofenac Diethylamine - Methyl Salicylate - Linseed Oil Nand Menthol 1.16%+10%+3%+ 5%, 20 Gm Item31 1 20 Gm 35 1.034 483- Diclofenac Sodium And Paracetamol Tablet 50 + 325 Mg, 10 Tab Item32 1 10 Tab 36 1.035 19- Diclofenac Sodium Injection - For Im And Iv 25 Mg / Ml, 3 Ml Amp Item33 1 3 Ml Amp 37 1.036 20- Diclofenac Sodium Tablet 50 Mg, 10 Tab Item34 1 10 Tab 38 1.037 437- Diclofenac Prolonged Release Tablet Ip 100Mg, 10 Tab Item35 1 10 Tab 39 1.038 658- Etoricoxib Tablet 90 Mg, 10 Tab Item36 1 10 Tab 40 1.039 495- Etoricoxib Tablet 120 Mg, 10 Tab Item37 1 10 Tab 41 1.04 22- Ibuprofen And Paracetamol Tablet 400 Mg + 325 Mg, 10 Tab Item38 1 10 Tab 42 1.041 23- Ibuprofen Tablet 200 Mg, 10 Tab Item39 1 10 Tab 43 1.042 24- Ibuprofen Tablet 400 Mg, 10 Tab Item40 1 10 Tab 44 1.043 477- Ibuprofen Oral Suspension 100 Mg / 5Ml, 60 Ml Item41 1 60 Ml 45 1.044 436- Indomethacin Capsule 25 Mg, 10 Tab Item42 1 10 Tab 46 1.045 496- Mefenamic Acid Tablet 500 Mg, 10 Tab Item43 1 10 Tab 47 1.046 26- Paracetamol Drops 150 Mg / Ml, 15 Ml Bottle Item44 1 15 Ml Bottle 48 1.047 27- Paracetamol Syrup 125 Mg / 5Ml, 60 Ml Bottle Item45 1 60 Ml Bottle 49 1.048 28- Paracetamol Tablet 500 Mg, 10 Tab Item46 1 10 Tab 50 1.049 29- Paracetamol Injection 150 Mg / Ml, 2 Ml Amp Item47 1 2 Ml Amp 51 1.05 2.3 Muscle Relaxants 52 1.051 610- Chlorzoxazone- Diclofenac Sodium & Paracetamol Tablet N250mg+50Mg+325 Mg, 10 Tab Item49 1 10 Tab 53 1.052 3. Drugs For Gout & Rheumatoid Arthritis 54 1.053 598- Allopurinol Tablet 100 Mg, 10 Tab Item51 1 10 Tab 55 1.054 599- Hydroxychloroquine Sulphate Tablet 200 Mg, 10 Tab Item52 1 10 Tab 56 1.055 600- Leflunomide Phosphate Tablet 10 Mg, 10 Tab Item53 1 10 Tab 57 1.056 601- Leflunomide Phosphate Tablet 20 Mg, 10 Tab Item54 1 10 Tab 58 1.057 602- Sulfasalazine Delayed Release Tablet 500 Mg, 10 Tab Item55 1 10 Tab 59 1.058 4. Antiallergics & Drugs Used In Anaphylaxis 60 1.059 4.1 Corticosteroids 61 1.06 35- Betamethasone Tablet 0.5 Mg, 10 Tab Item58 1 10 Tab 62 1.061 418- Betamethasone Sodium Phosphate Injection 4 Mg / Ml, 1 Ml Vial Item59 1 1 Ml Vial 63 1.062 39- Dexamethasone Injection 8 Mg / 2Ml, 2 Ml Vial Item60 1 2 Ml Vial 64 1.063 40- Dexamethasone Tablet 0.5 Mg, 10 Tab Item61 1 10 Tab 65 1.064 42- Hydrocortisone Sodium Succinate Injection 100 Mg Base / Vial, Vial Item62 1 Vial 66 1.065 44- Methyl Prednisolone Sodium Succinate Nfor Injection 500 Mg, Vial Item63 1 Vial 67 1.066 47- Prednisolone Tablet 5 Mg, 10 Tab Item64 1 10 Tab 68 1.067 469- Prednisolone Tablet 10 Mg, 10 Tab Item65 1 10 Tab 69 1.068 470- Prednisolone Tablet 20 Mg, 10 Tab Item66 1 10 Tab 70 1.069 4.2 Antihistaminics & Drugs Used In Anaphylaxis 71 1.07 34- Adrenaline Injection 1 Mg / Ml, 1 Ml Amp Item68 1 1 Ml Amp 72 1.071 37- Chlorpheniramine Maleate Tablet 4 Mg, 10 Tab Item69 1 10 Tab 73 1.072 43- Hydroxyzine Tablet 25 Mg, 10 Tab Item70 1 10 Tab 74 1.073 45- Pheniramine Injection 22.75 Mg / Ml, 2 Ml Amp Item71 1 2 Ml Amp 75 1.074 48- Promethazine Syrup 5 Mg / 5Ml, 60 Ml Bottle Item72 1 60 Ml Bottle 76 1.075 49- Promethazine Injection 25 Mg / Ml, 2 Ml Amp Item73 1 2 Ml Amp 77 1.076 50- Promethazine Tablet 25 Mg, 10 Tab Item74 1 10 Tab 78 1.077 497- Anticold Syrup: Phenylephrine Hcl - Chlorpheniramine Maleate- And Paracetamol 2.5 Mg+ 1 Mg+125 Mg / 5Ml, 30 Ml Bottle Item75 1 30 Ml Bottle 79 1.078 498- Cetirizine- Phenylephrine& Paracetamol Tablet 5 Mg+ 10 Mg +325 Mg, 10 Tab Item76 1 10 Tab 80 1.079 499- Cetirizine Syrup 5 Mg / Ml, 30 Ml Item77 1 30 Ml 81 1.08 659- Levoceitrizine Tablet 5Mg, 10 Tablet Item78 1 10 Tablet 82 1.081 660- Montelukast + Levocetrizine Tablet, 10 Tablet Item79 1 10 Tablet 83 1.082 5. Antidotes And Other Substances Used In Poisoning 84 1.083 51- Naloxone Injection 0.4 Mg / Ml, 1 Ml Amp Item81 1 1 Ml Amp 85 1.084 52- Pralidoxime Chloride Injection 25 Mg / Ml, 20 Ml Item82 1 20 Ml 86 1.085 500- N- Acetylcystine Injection 200 Mg / Ml, 2 Ml Amp Item83 1 2 Ml Amp 87 1.086 6. Anti Epileptic Drugs 88 1.087 53- Carbamazepine Tablet 200 Mg, 10 Tab Item85 1 10 Tab 89 1.088 54- Carbamazepine Tablet 100 Mg, 10 Tab Item86 1 10 Tab 90 1.089 474- Carbamazepine Oral Suspension 100 Mg / 5Ml, 100 Ml Bottle Item87 1 100 Ml Bottle 91 1.09 56- Phenobarbitone Tablet 30 Mg, 10 Tab Item88 1 10 Tab 92 1.091 420- Phenobarbitone Injection 200 Mg / Ml, 1 Ml Item89 1 1 Ml 93 1.092 57- Phenytoin Injection 50 Mg / Ml, 2 Ml Amp Item90 1 2 Ml Amp 94 1.093 58- Phenytoin Oral Suspension 25 Mg / Ml, 100 Ml Item91 1 100 Ml 95 1.094 59- Phenytoin Tablet 100 Mg, 10 Tab Item92 1 10 Tab 96 1.095 634- Pregabalin Capsule 75 Mg, 10 Cap Item93 1 10 Cap 97 1.096 60- Sodium Valproate Injection 100 Mg / Ml, 5 Ml Vial Item94 1 5 Ml Vial 98 1.097 61- Sodium Valproate Tablet 200 Mg, 10 Tab Item95 1 10 Tab 99 1.098 479- Sodium Valproate Oral Solution 200 Mg / 5Ml, 100 Ml Bottle Item96 1 100 Ml Bottle 100 1.099 661- Sodium Valproate Tablet 500 Mg, 10 Tab Item97 1 10 Tab 101 1.1 662- Clobazam Tablet 5 Mg, 10 Tab Item98 1 10 Tab 102 1.101 663- Clobazam Tablet 10 Mg, 10 Tab Item99 1 10 Tab 103 1.102 664- Levetiracetam Tablet 500 Mg, 10 Tab Item100 1 10 Tab 104 1.103 665- Levetiracetam 100 Mg Suspension, 100 Ml Item101 1 100 Ml 105 1.104 666- Levetiracetam 500 Mg Injection, Vial Item102 1 Vial 106 1.105 667- Gabapentine Tablet 75 Mg, 10 Tab Item103 1 10 Tab 107 1.106 668- Gabapentine Tablet 150 Mg, 10 Tab Item104 1 10 Tab 108 1.107 7. Anti- Infective Drugs 109 1.108 7.1 Antibacterials 110 1.109 7.1.1 Aminoglycosides 111 1.11 67- Amikacin Injection 100 Mg, 2 Ml Vial Item108 1 2 Ml Vial 112 1.111 504- Amikacin Injection 250 Mg, Vial Item109 1 Vial 113 1.112 68- Amikacin Injection 500 Mg, 2 Ml Vial Item110 1 2 Ml Vial 114 1.113 116- Gentamycin Injection 80 Mg / 2Ml, 2 Ml Amp Item111 1 2 Ml Amp 115 1.114 7.1.2 Betalactam 116 1.115 7.1.2.1 Penicillins 117 1.116 71- Amoxycillin Capsule 250 Mg, 10 Cap Item114 1 10 Cap 118 1.117 72- Amoxycillin Capsule 500 Mg, 10 Cap Item115 1 10 Cap 119 1.118 73- Amoxycillin Trihydrate Dispersible Tablet 125 Mg, 10 Tab Item116 1 10 Tab 120 1.119 473- Amoxycillin Oral Suspension ( Dry Syrup ) 125 Mg / 5Ml, 30 Ml Bottle Item117 1 30 Ml Bottle 121 1.12 69- Amoxycillin And Cloxacillin Capsule 250Mg + 250Mg, 10 Cap Item118 1 10 Cap 122 1.121 70- Amoxycillin And Potassium Clavulanate Tabs N500mg + 125Mg, 10 Tab Item119 1 10 Tab 123 1.122 505- Amoxycillin And Clavulanic Acid Injection 600 Mg, Vial Item120 1 Vial 124 1.123 506- Amoxycillin And Clavulanic Acid Injection 1.2 Gm, Vial Item121 1 Vial 125 1.124 507- Amoxycillin & Clavulanic Acid Syrup N200 Mg + 28.5 Mg / 5 Ml, 30 Ml Item122 1 30 Ml 126 1.125 412- Ampicillin Capsule 500 Mg, 10 Cap Item123 1 10 Cap 127 1.126 75- Ampicillin Injection 500 Mg, Vial Item124 1 Vial 128 1.127 81- Benzathine Benzylpenicillin Injection 12 Lac Units, Vial Item125 1 Vial 129 1.128 82- Benzathine Benzylpenicillin Injection 6 Lac Units, Vial Item126 1 Vial 130 1.129 417- Cloxacillin Sodium Injection 500 Mg, Vial Item127 1 Vial 131 1.13 468- Piperacillin And Tazobactum For Injection 4 Gm + 500 Mg, Vial Item128 1 Vial 132 1.131 7.1.2.2 Cephalosporins 133 1.132 510- Cefepime Injection 500 Mg, Vial Item130 1 Vial 134 1.133 84- Cefixime Tablet 100 Mg, 10 Tab Item131 1 10 Tab 135 1.134 85- Cefixime Tablet 200 Mg, 10 Tab Item132 1 10 Tab 136 1.135 511- Cefixime Oral Susp ( Drops ) 25 Mg / Ml, 10 Ml Bottle Item133 1 10 Ml Bottle 137 1.136 86- Cefoperazone And Sulbactum For Injection 1 G + 0.5 G, Vial Item134 1 Vial 138 1.137 87- Cefotaxime Injection 1 G, Vial Item135 1 Vial 139 1.138 88- Cefotaxime Injection 250 Mg, Vial Item136 1 Vial 140 1.139 475- Cefpodoxime Dispersible Tablet 50 Mg, 10 Tab Item137 1 10 Tab 141 1.14 89- Ceftazidime Injection 1 G, Vial Item138 1 Vial 142 1.141 90- Ceftazidime Injection 250 Mg, Vial Item139 1 Vial 143 1.142 91- Ceftazidime Injection 500 Mg, Vial Item140 1 Vial 144 1.143 93- Ceftriaxone Injection 1 G, Vial Item141 1 Vial 145 1.144 94- Ceftriaxone Injection 250 Mg, Vial Item142 1 Vial 146 1.145 95- Ceftriaxone Injection 500 Mg, Vial Item143 1 Vial 147 1.146 512- Cefuroxime Tablet 250 Mg, 10 Tab Item144 1 10 Tab 148 1.147 96- Cephalexin Capsule 250 Mg, 10 Cap Item145 1 10 Cap 149 1.148 97- Cephalexin Capsule 500 Mg, 10 Cap Item146 1 10 Cap 150 1.149 427- Cephalexin Oral Suspension ( Cephalexin Dry Syrup ) 125 Mg / 5Ml, 30 Ml Bottle Item147 1 30 Ml Bottle 151 1.15 476- Cephalexin Tablet ( Dt ) 125 Mg, 10 Tab Item148 1 10 Tab 152 1.151 7.1.3 Macrolides 153 1.152 78- Azithromycin Tablet ( Dt ) 100 Mg, 3 Tab Item150 1 3 Tab 154 1.153 79- Azithromycin Tablet 250 Mg, 3 Tab Item151 1 3 Tab 155 1.154 80- Azithromycin Tablet 500 Mg, 3 Tab Item152 1 3 Tab 156 1.155 7.1.4 Quinolones 157 1.156 101- Ciprofloxacin Injection 200 Mg / 100 Ml, 100 Ml Bottle Item154 1 100 Ml Bottle 158 1.157 102- Ciprofloxacin Tablet 250 Mg, 10 Tab Item155 1 10 Tab 159 1.158 103- Ciprofloxacin Tablet 500 Mg, 10 Tab Item156 1 10 Tab 160 1.159 515- Levofloxacin Tablet 250 Mg, 10 Tab Item157 1 10 Tab 161 1.16 124- Norfloxacin Tablet 400 Mg, 10 Tab Item158 1 10 Tab 162 1.161 125- Ofloxacin Tablet 200 Mg, 10 Tab Item159 1 10 Tab 163 1.162 428- Ofloxacin Suspension 50 Mg / 5Ml, 30 Ml Bottle Item160 1 30 Ml Bottle 164 1.163 521- Ofloxacin Injection 200Mg / 100 Ml, 100 Ml Bottle Item161 1 100 Ml Bottle 165 1.164 520- Ofloxacin And Ornidazole Tablet 200 Mg + 500 Mg, 10 Tab Item162 1 10 Tab 166 1.165 7.1.5 Other Anti Bacterials 167 1.166 509- Aztreonam Injection 500 Mg, Vial Item164 1 Vial 168 1.167 513- Clindamycin Capsule 150 Mg, 10 Cap Item165 1 10 Cap 169 1.168 514- Clindamycin Capsule 300 Mg, 10 Cap Item166 1 10 Cap 170 1.169 107- Co-Trimoxazole Oral Suspension N40mg + 200Mg Per 5Ml, 50 Ml Bottle Item167 1 50 Ml Bottle 171 1.17 108- Co-Trimoxazole Tablet 40Mg + 200Mg, 10 Tab Item168 1 10 Tab 172 1.171 669- Co-Trimoxazole Tablet 160Mg + 800Mg, 10 Tab Item169 1 10 Tab 173 1.172 111- Doxycycline Capsule 100 Mg, 10 Tab Item170 1 10 Tab 174 1.173 516- Linezolid Tablet 600 Mg, 10 Tab Item171 1 10 Tab 175 1.174 517- Linezolid Injection 200 Mg / 100 Ml, 100 Ml Item172 1 100 Ml 176 1.175 119- Meropenem Injection 500 Mg, Vial Item173 1 Vial 177 1.176 481- Meropenem Injection 1 G, Vial Item174 1 Vial 178 1.177 413- Nitrofurantoin Tablet 100 Mg, 10 Tab Item175 1 10 Tab 179 1.178 523- Vancomycin Injection 500 Mg, Vial Item176 1 Vial 180 1.179 524- Vancomycin Injection 1 Gm, Vial Item177 1 Vial 181 1.18 683- Aztreonam 1Gm Injection, Vial Item178 1 Vial 182 1.181 684- Framycetin Sulphate 1% Cream, 30Gm Pack Item179 1 30Gm Pack 183 1.182 685- Framycetin Sulphate 1% Cream, 100Gm Pack Item180 1 100Gm Pack 184 1.183 7.2 Anti Amoebic 185 1.184 120- Metronidazole Injection 500 Mg / 100Ml, 100 Ml Bottle Item182 1 100 Ml Bottle 186 1.185 121- Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml, 60 Ml Bottle Item183 1 60 Ml Bottle 187 1.186 122- Metronidazole Tablet 200 Mg, 10 Tab Item184 1 10 Tab 188 1.187 123- Metronidazole Tablet 400 Mg, 10 Tab Item185 1 10 Tab 189 1.188 519- Metronidazole & Norfloxacin Suspension N100 Mg+ 100 Mg / 5Ml, 30 Ml Bottle Item186 1 30 Ml Bottle 190 1.189 430- Tinidazole Tablet 300 Mg, 10 Tab Item187 1 10 Tab 191 1.19 431- Tinidazole Tablet 500 Mg, 10 Tab Item188 1 10 Tab 192 1.191 7.3 Anthelmintics 193 1.192 65- Albendazole Oral Suspension 400 Mg / 10Ml, 10 Ml Bottle Item190 1 10 Ml Bottle 194 1.193 66- Albendazole Tablet 400 Mg, 10 Tab Item191 1 10 Tab 195 1.194 110- Diethylcarbamazine Tablet 100 Mg, 10 Tab Item192 1 10 Tab 196 1.195 7.4 Anti Fungals 197 1.196 104- Clotrimazole Cream 2%, 15 Gm Tube Item194 1 15 Gm Tube 198 1.197 105- Clotrimazole Vaginal Tablet 500 Mg, Single Tab Item195 1 Single Tab 199 1.198 114- Fluconazole Tablet 150 Mg, 10 Tab Item196 1 10 Tab 200 1.199 117- Griseofulvin Tablet 125 Mg, 10 Tab Item197 1 10 Tab 201 1.2 118- Itraconazole Capsule 100 Mg, 4 Cap Item198 1 4 Cap 202 1.201 74- Amphotericin B Injection 50 Mg, Vial Item199 1 Vial 203 1.202 7.5 Anti Malarials 204 1.203 508- Artisunate Injection 60 Mg ( Combo Pack With 1 Ml Ampoule Of 5% Sodium Bicarbonate Injection And 5 Ml Ampoule Of 0.9% Sodium, Vial Item201 1 Vial 205 1.204 98- Chloroquine Phosphate Injection 40 Mg / Ml, 5 Ml Amp Item202 1 5 Ml Amp 206 1.205 99- Chloroquine Phosphate Tablet 250Mg ( =155 Mg Of Chloroquine Base ) N250 Mg, 10 Tab Item203 1 10 Tab 207 1.206 100A- Chloroquine Suspension 50 Mg / 5Ml, 60 Ml Bottle Item204 1 60 Ml Bottle 208 1.207 518- Mefloquine Tablet 250 Mg, 6 Tab Item205 1 6 Tab 209 1.208 128- Primaquine Tablet 2.5 Mg, 10 Tab Item206 1 10 Tab 210 1.209 129- Primaquine Tablet 7.5 Mg, 10 Tab Item207 1 10 Tab 211 1.21 131- Quinine Dihydrochloride Injection 300 Mg / Ml, 2 Ml Amp Item208 1 2 Ml Amp 212 1.211 132- Quinine Sulphate Tablet 300 Mg, 10 Tab Item209 1 10 Tab 213 1.212 645- Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250 Mg+ 12.5 Mg ) , 3 Tablet Pink Color Pack Item210 1 3 Tablet Pink Color Pack 214 1.213 646- Act Kit Containing 3 Tablets Of Artesunate ( 50Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500+25 ) Mg, 3 Tablet Yellow Color Pack Item211 1 3 Tablet Yellow Color Pack 215 1.214 647- Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750 + 37.5 ) Mg, 3 Tablet Green Color Pack Item212 1 3 Tablet Green Color Pack 216 1.215 648- Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Nof Sulphadoxine And Pyrimethamine ( 500 Mg+ 25 Mg ) , 3 Tablet Red Ncolor Pack Item213 1 3 Tablet Red Ncolor Pack 217 1.216 649- Act Kit Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablets Of Sulphadoxine And Pyrimethamine ( 750 + 37.5 Mg ) Each Or 3 Tablets Of Sulphadoxine And Pyrimethamine ( 500+25Mg ) Each, 3 Tablet White Color Pack Item214 1 3 Tablet White Color Pack 218 1.217 686- Artesunate + Leumefantrine Tablet ( 40 Mg And 240 Mg ) , 6 Tab Item215 1 6 Tab 219 1.218 651- Artesunate + Leumefantrine Tablet ( 80 Mg And 480 Mg ) , 6 Tab Item216 1 6 Tab 220 1.219 7.6 Anti Viral 221 1.22 63- Acyclovir Tablet 200 Mg, 10 Tab Item218 1 10 Tab 222 1.221 64- Acyclovir Tablet 800 Mg, 10 Tab Item219 1 10 Tab 223 1.222 62- Acyclovir Suspension 400 Mg / 5Ml, 60 Ml Bottle Item220 1 60 Ml Bottle 224 1.223 502- Acyclovir Injection 250 Mg, Vial Item221 1 Vial 225 1.224 503- Acyclovir Injection 500 Mg, Vial Item222 1 Vial 226 1.225 8. Anti Neoplastic And Immuno Suppressant Drugs 227 1.226 133- Azathioprine Tablet 50 Mg, 10 Tab Item224 1 10 Tab 228 1.227 134- Bleomycin Injection 15 Units, Vial Item225 1 Vial 229 1.228 136- Chlorambucil Tablet 5 Mg, 30 Tab Bottle Item226 1 30 Tab Bottle 230 1.229 137- Cisplatin Injection 50 Mg / 50Ml, 50 Ml Vial Item227 1 50 Ml Vial 231 1.23 138- Cyclophosphamide Injection 200 Mg, 10 Ml Vial Item228 1 10 Ml Vial 232 1.231 139- Cyclophosphamide Injection 500 Mg, 25 Ml Vial Item229 1 25 Ml Vial 233 1.232 677- Cyclosporine Capsule 50 Mg, 50 Caps Pack Item230 1 50 Caps Pack 234 1.233 141- Cytarabine Injection 100 Mg / 5Ml, 5 Ml Vial Item231 1 5 Ml Vial 235 1.234 142- Danazol Capsule 50 Mg, 10 Cap Item232 1 10 Cap 236 1.235 143- Daunorubicin Injection 20 Mg, 10 Ml Vial Item233 1 10 Ml Vial 237 1.236 144- Doxorubicin Injection 50 Mg / 25Ml, 25 Ml Vial Item234 1 25 Ml Vial 238 1.237 146- Etoposide Injection 100 Mg / 5Ml, 5 Ml Vial Item235 1 5 Ml Vial 239 1.238 148- Fluorouracil Injection 250 Mg / 5Ml, 5 Ml Amp Item236 1 5 Ml Amp 240 1.239 149- L-Asparaginase Injection 10000 Iu, Vial Item237 1 Vial 241 1.24 150- Leucovorin Calcium Injection 10 Mg / Ml, 5 Ml Vial Item238 1 5 Ml Vial 242 1.241 151- Melphalan Tablet 5 Mg, 25 Tab Bottle Item239 1 25 Tab Bottle 243 1.242 152- Mercaptopurine Tablet 50 Mg, 10 Tab Item240 1 10 Tab 244 1.243 153- Methotrexate Injection 50 Mg / 2Ml, 2 Ml Vial Item241 1 2 Ml Vial 245 1.244 154- Methotrexate Tablet 2.5 Mg, 10 Tab Item242 1 10 Tab 246 1.245 155- Paclitaxel Injection 260 Mg, 43.4 Ml Vial Item243 1 43.4 Ml Vial 247 1.246 156- Paclitaxel Injection 100 Mg, 16.7 Ml Vial Item244 1 16.7 Ml Vial 248 1.247 157- Tamoxifen Tablet 10 Mg, 10 Tab Item245 1 10 Tab 249 1.248 158- Vinblastine Injection 10 Mg / 10 Ml, 10 Ml Vial Item246 1 10 Ml Vial 250 1.249 159- Vincristine Injection 1 Mg / Ml, 1 Ml Vial Item247 1 1 Ml Vial 251 1.25 525- Alpha Interferon Injection 3 Million Unit, Vial Item248 1 Vial 252 1.251 526- Carboplatin Injection 150Mg, 15 Ml Vial Item249 1 15 Ml Vial 253 1.252 527- Carboplatin Injection 450Mg, 45 Ml Vial Item250 1 45 Ml Vial 254 1.253 528- Cisplatin Injection 10 Mg / 10 Ml, 10 Ml Vial Item251 1 10 Ml Vial 255 1.254 529- Dacarbazine Injection 500 Mg, Vial Item252 1 Vial 256 1.255 530- Filgrastim Injection 300Mcg / Ml, 1 Ml Pfs Item253 1 1 Ml Pfs 257 1.256 531- Gemcitabine Injection 200 Mg, Vial Item254 1 Vial 258 1.257 532- Gemcitabine Injection 1Gm, Vial Item255 1 Vial 259 1.258 533- Ifosfamide Injection 1Gm, Vial Item256 1 Vial 260 1.259 534- Imatinib Tablet 400 Mg, 10 Tab Item257 1 10 Tab 261 1.26 536- Methotrexate Tablet 10 Mg, 10 Tab Item258 1 10 Tab 262 1.261 537- Mitomycin C Injection 10 Mg, Vial Item259 1 Vial 263 1.262 538- Oxaliplatin Injection 50 Mg, 25 Ml Vial Item260 1 25 Ml Vial 264 1.263 9. Anti Parkinsonism Drugs 265 1.264 540- Bromocriptine Mesylate Tablet 2.5 Mg, 10 Tab Item262 1 10 Tab 266 1.265 160- Levodopa And Carbidopa Tablet 100 Mg + 10 Mg, 10 Tab Item263 1 10 Tab 267 1.266 161- Levodopa And Carbidopa Tablet 250 Mg + 25Mg, 10 Tab Item264 1 10 Tab 268 1.267 162- Trihexyphenidyl Hydrochloride Tablet 2 Mg, 10 Tab Item265 1 10 Tab 269 1.268 10. Drugs Affecting Blood 270 1.269 10.1 Anticoagulant 271 1.27 163- Acenocoumarol Tablet 2 Mg, 10 Tab Item268 1 10 Tab 272 1.271 172- Enoxaparin Sodium Injection 60 Mg, Vial / Pfs Item269 1 Vial / Pfs 273 1.272 174- Heparin Sodium Injection 5000 Iu / Ml, 5 Ml Vial Item270 1 5 Ml Vial 274 1.273 546- Warfarin Sod. Tablet 5 Mg, 10 Tab Item271 1 10 Tab 275 1.274 10.2 Haemostatic 276 1.275 173- Ethamsylate Injection 250 Mg / 2Ml, 2 Ml Amp Item273 1 2 Ml Amp 277 1.276 545- Tranexamic Acid Tablet 500 Mg, 6 Tab Item274 1 6 Tab 278 1.277 180- Vitamin K Injection 10 Mg / Ml, 1 Ml Amp Item275 1 1 Ml Amp 279 1.278 10.3 Drugs Used In Haemophilia 280 1.279 171- Dried Factor Viii Fraction ( Iv Use ) 250 Iu, Vial With Diluent Item277 1 Vial With Diluent 281 1.28 406- Factor – Ix Concentrate 600 Iu, Vial With Solvent Item278 1 Vial With Solvent 282 1.281 407- Anti- Inhibitor Coagulation Complex [ Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial 500 Iu ] , Vial With 20 Ml Solvent Item279 1 Vial With 20 Ml Solvent 283 1.282 10.4 Drugs Used In Thalassaemia 284 1.283 165- Deferasirox Tablet 100 Mg, 30 Tab Item281 1 30 Tab 285 1.284 166- Deferasirox Tablet 500 Mg, 30 Tab Item282 1 30 Tab 286 1.285 167- Deferiprone Capsule 250 Mg, 50 Caps Item283 1 50 Caps 287 1.286 168- Deferiprone Capsule 500 Mg, 50 Caps Item284 1 50 Caps 288 1.287 169- Desferrioxamine Injection ( For I.M. Inj And I.V.- S.C. Infusion ) 500 Mg, Vial Item285 1 Vial 289 1.288 10.5 Erythropoetins 290 1.289 176- Rh-Erythropoetin Injection 10000 Iu, Vial / Pfs Item287 1 Vial / Pfs 291 1.29 177- Rh-Erythropoetin Injection 2000 Iu, Vial / Pfs Item288 1 Vial / Pfs 292 1.291 179- Rh-Erythropoetin Injection 4000 Iu, Vial / Pfs Item289 1 Vial / Pfs 293 1.292 10.6 Plasma Expanders 294 1.293 175- Human Albumin Solution 20%, 100 Ml Bottle Item291 1 100 Ml Bottle 295 1.294 416- Hydroxyethyl Starch ( 130 / 4 ) 6% W / V With Sodium Chloride 0.9% W / V Niv Infusion, 500 Ml Bottle Item292 1 500 Ml Bottle 296 1.295 405- Polygeline 3.5% Solution With Electrolytes For I.V. Infusion, 500 Ml Bottle Item293 1 500 Ml Bottle 297 1.296 11. Cardio Vascular Drugs 298 1.297 11.1 Antiarrhythmic 299 1.298 547- Adenosine Injection 6 Mg / 2Ml, 2 Ml Vial Item296 1 2 Ml Vial 300 1.299 181- Amiodarone Tablet 100 Mg, 10 Tab Item297 1 10 Tab 301 1.3 182- Amiodarone Tablet 200 Mg, 10 Tab Item298 1 10 Tab 302 1.301 183- Amiodarone Hydrochloride Injection 50 Mg / Ml, 3 Ml Amp Item299 1 3 Ml Amp 303 1.302 211- Verapamil Tablet 40 Mg, 10 Tab Item300 1 10 Tab 304 1.303 11.2 Thrombolytic 305 1.304 209- Streptokinase Injection 15 Lac Units, Vial Item302 1 Vial 306 1.305 557- Urokinase Injection 5 Lac Unit, Vial Item303 1 Vial 307 1.306 11.3 Antiplatelet 308 1.307 444- Aspirin Delayed Release Tablet ( Enteric Coated ) 75 Mg, 14 Tab Item305 1 14 Tab 309 1.308 188- Clopidogrel Tablet 75 Mg, 10 Tab Item306 1 10 Tab 310 1.309 549- Clopidogrel And Aspirin Tablet 75 Mg + 75 Mg, 10 Tab Item307 1 10 Tab 311 1.31 11.4 Antihypertensive 312 1.311 184- Amlodipine Tablet Ip 2.5 Mg, 10 Tab Item309 1 10 Tab 313 1.312 185- Amlodipine Tablet 5 Mg, 10 Tab Item310 1 10 Tab 314 1.313 186- Atenolol Tablet 50 Mg, 14 Tab Item311 1 14 Tab 315 1.314 462- Atenolol Tablet 25 Mg, 14 Tab Item312 1 14 Tab 316 1.315 191- Diltiazem Tablet 30 Mg, 10 Tab Item313 1 10 Tab 317 1.316 463- Enalapril Maleate Tablet 10 Mg, 10 Tab Item314 1 10 Tab 318 1.317 194- Enalapril Maleate Tablet 5 Mg, 10 Tab Item315 1 10 Tab 319 1.318 195- Enalapril Maleate Tablet 2.5 Mg, 10 Tab Item316 1 10 Tab 320 1.319 410- Labetalol Tablet 100 Mg, 10 Tab Item317 1 10 Tab 321 1.32 411- Labetalol Hydrochloride Injection 20 Mg / 4Ml, 4 Ml Amp Item318 1 4 Ml Amp 322 1.321 466- Lisinopril Tablet 2.5 Mg, 10 Tab Item319 1 10 Tab 323 1.322 199- Lisinopril Tablet 5 Mg, 10 Tab Item320 1 10 Tab 324 1.323 465- Lisinopril Tablet 10 Mg, 10 Tab Item321 1 10 Tab 325 1.324 467- Losartan Tablet 25 Mg, 10 Tab Item322 1 10 Tab 326 1.325 200- Losartan Tablet 50 Mg, 10 Tab Item323 1 10 Tab 327 1.326 457- Amlodipine And Enalapril Maleate Tablet 5 Mg +5Mg, 10 Tab Item324 1 10 Tab 328 1.327 458- Losartan Potassium & Amlodipine Tablet 50 Mg + 5Mg, 10 Tab Item325 1 10 Tab 329 1.328 459- Losartan Potassium & Hydrochlorothiazide Tablet N50 Mg + 12.5Mg, 10 Tab Item326 1 10 Tab 330 1.329 460- Amlodipine And Lisinopril Tablet 5 Mg +5Mg, 10 Tab Item327 1 10 Tab 331 1.33 461- Amlodipine And Atenolol Tablet 5 Mg +50Mg, 10 Tab Item328 1 10 Tab 332 1.331 202- Methyldopa Tablet 250 Mg, 10 Tab Item329 1 10 Tab 333 1.332 552- Metoprolol Tablet 25 Mg, 10 Tab Item330 1 10 Tab 334 1.333 553- Metoprolol Tablet ( Extended Release ) 50Mg, 10 Tab Item331 1 10 Tab 335 1.334 203- Nifedipine Capsule 5 Mg, 10 Cap Item332 1 10 Cap 336 1.335 204- Nifedipine Tablet ( Sustained Release ) 10 Mg, 10 Tab Item333 1 10 Tab 337 1.336 555- Prazosin Tablet ( Extended Release ) 2.5 Mg, 14 Tab Item334 1 14 Tab 338 1.337 207- Propranolol Tablet 40 Mg, 10 Tab Item335 1 10 Tab 339 1.338 636- Ramipril Tablet / Capsule 2.5 Mg, 10 Cap Item336 1 10 Cap 340 1.339 556- Telmisartan Tablet 40 Mg, 10 Tab Item337 1 10 Tab 341 1.34 11.5 Antianginal 342 1.341 650- Glyceryl Trinitrate Tablet 2.6 Mg, 10 Tab Item339 1 10 Tab 343 1.342 197- Isosorbide Dinitrate Tablet 5 Mg, 10 Tab Item340 1 10 Tab 344 1.343 198- Isosorbide Mononitrate Tablet 20 Mg, 10 Tab Item341 1 10 Tab 345 1.344 205- Nitroglycerin Injection 5 Mg / Ml, 5 Ml Amp Item342 1 5 Ml Amp 346 1.345 11.6 Lipid Lowering 347 1.346 187- Atorvastatin Tablet 10 Mg, 10 Tab Item344 1 10 Tab 348 1.347 548- Atorvastatin Tablet 40 Mg, 10 Tab Item345 1 10 Tab 349 1.348 550- Fenofibrate Capsule 200 Mg, 10 Cap Item346 1 10 Cap 350 1.349 11.7 Drugs Used In Heart Failure 351 1.35 189- Digoxin Injection 0.25 Mg / Ml, 2 Ml Amp Item348 1 2 Ml Amp 352 1.351 190- Digoxin Tablet 0.25 Mg, 10 Tab Item349 1 10 Tab 353 1.352 192- Dobutamine Injection 50 Mg / Ml, 5 Ml Amp Item350 1 5 Ml Amp 354 1.353 193- Dopamine Hydrochloride Injection 40 Mg / Ml, 5 Ml Amp Item351 1 5 Ml Amp 355 1.354 551- Isoprenaline Injection 2Mg / Ml, 1 Ml Amp Item352 1 1 Ml Amp 356 1.355 11.8 Miscellaneous 357 1.356 554- Noradrenaline Injection 2 Mg / Ml, 1 Ml Amp Item354 1 1 Ml Amp 358 1.357 201- Magnesium Sulphate Injection ( 50% ) 500 Mg / Ml, 2 Ml Amp Item355 1 2 Ml Amp 359 1.358 12. Dental Drugs 360 1.359 580- Chlorhexidine Mouthwash Bp 0.20%, 50 Ml Bottle Item357 1 50 Ml Bottle 361 1.36 581- Dental Gel: Choline Salicylate + Benzalkonium + Lignocaine 8.75%, 10 Gm Item358 1 10 Gm 362 1.361 582- Desensitizing Tooth Gel With Sodium Mono Fluoro Phosphate & Pot. Nitrate 0.7%+ 5 %, 50 Gm Item359 1 50 Gm 363 1.362 583- Gum Paint Containing Tannic Acid - Cetrimide - Zinc Chloride N2%+0.1%+1%, 15 Ml Item360 1 15 Ml 364 1.363 584- Metronidazole And Chlorhexidine Gel 1%+ 0.25%, 10 Gm Item361 1 10 Gm 365 1.364 13. Dermatological Drugs 366 1.365 13.1 Antifungal 367 1.366 220- Miconazole Nitrate Cream 2%, 15 Gm Tube Item364 1 15 Gm Tube 368 1.367 443- Clotrimazole Mouth Paint ( Clotrimazole 1% W / V ) 1%, 15 Ml Item365 1 15 Ml 369 1.368 565- Ketoconazole Cream 2%, 15 Gm Tube Item366 1 15 Gm Tube 370 1.369 13.2 Anti-Infective 371 1.37 445- Beclomethasone- Neomycin And Clotrimazole Cream 0.025% + 0.5% +, 10G Tube Item368 1 10G Tube 372 1.371 560- Clindamycin Gel 1%, 20 Gm Tube Item369 1 20 Gm Tube 373 1.372 216- Fusidic Acid Cream 2%, 20 Gm Tube Item370 1 20 Gm Tube 374 1.373 223- Neomycin- Bacitracin And Sulphacetamide Powder N ( Neomycin5mg +Bacitracin 250Units +Sulphacetamide 60Mg ) , 10 Gm Item371 1 10 Gm 375 1.374 13.3 Topical Steroids 376 1.375 558- Betamethasone Dipropionate Cream 0.05%, 15 Gm Item373 1 15 Gm 377 1.376 559- Betamethasone Lotion 0.05%, 50 Ml Item374 1 50 Ml 378 1.377 561- Clobetasol Cream 0.05%, 20 Gm Tube Item375 1 20 Gm Tube 379 1.378 13.4 Antiviral 380 1.379 213- Acyclovir Cream 5%, 5 Gm Tube Item377 1 5 Gm Tube 381 1.38 13.5 Scabicides & Pediculocides 382 1.381 446- Gamma Benzene Hexachloride Lotion ( Lindane Lotion Usp ) 1%, 100 Ml Bottle Item379 1 100 Ml Bottle 383 1.382 569- Permethrin Cream 5%, 30 Gm Tube Item380 1 30 Gm Tube 384 1.383 568- Permethrin Lotion 5%, 30 Ml Item381 1 30 Ml 385 1.384 670- Coal Tar & Salicylic Acid Onitment, 20Gm Item382 1 20Gm 386 1.385 13.6 Others 387 1.386 564- Glycerin Ip 100 Ml, 100 Ml Bottle Item384 1 100 Ml Bottle 388 1.387 217- Glycerin Ip 400 Gm, 400 Gm Bottle Item385 1 400 Gm Bottle 389 1.388 671- Calamine Lotion Ip, 100 Ml Bottle Item386 1 100 Ml Bottle 390 1.389 106- Compound Benzoic Acid Ointment Ip Benzoic Acid 6%+ Salicylic Acid 3%, 15 Gm Tube Item387 1 15 Gm Tube 391 1.39 570- Tretenoin Cream 0.03%, 20 Gm Tube Item388 1 20 Gm Tube 392 1.391 14. Reagents & Diagnostic Agents 393 1.392 14.1 Blood Grouping 394 1.393 225- Anti A Blood Grouping Serum ( Anti A Monoclonal Serum Ip ) , 10 Ml Vial Item391 1 10 Ml Vial 395 1.394 226- Anti B Blood Grouping Serum, 10 Ml Vial Item392 1 10 Ml Vial 396 1.395 227- Anti Drh Blood Grouping Serum, 10 Ml Vial Item393 1 10 Ml Vial 397 1.396 14.2 Dyes & Contrast Media 398 1.397 232- Diatrizoate Meglumine And Diatrizoate Sodium Inj Usp 60% ( Iodine Conc. 292 Mg / Ml ) 60%, 20 Ml Amp Item395 1 20 Ml Amp 399 1.398 233- Diatrizoate Meglumine And Diatrizoate Sodium Inj Usp 76%W / V ( Iodine Conc. 370 Mg / Ml ) 76%, 20 Ml Amp Item396 1 20 Ml Amp 400 1.399 235- Gadodiamide Injection 0.5 Mmol / Ml, 10 Ml Vial Item397 1 10 Ml Vial 401 1.4 672- Iohexol ( Non Ionic Contrast Medium In Sterile Aqueous Solution ) 350 Nmg Iodine / Ml., 50 Ml Pack Item398 1 50 Ml Pack 402 1.401 482- Iohexol ( Non Ionic Contrast Medium In Sterile Aqueous Solution ) 300 Nmg Iodine / Ml., 20 Ml Pack Item399 1 20 Ml Pack 403 1.402 14.3 Diagnostic 404 1.403 673- Diagnostic Sticks For Multiple Use Strip ( Sugar- Ketone- Albumin ) , 50S Pack Item401 1 50S Pack 405 1.404 242- Vdrl Antigen ( With +Ve And -Ve Control ) / Rpr Slide Kit, 100 Test Kit Item402 1 100 Test Kit 406 1.405 15. Disinfectants & Antiseptics 407 1.406 215- Cetrimide Cream Ip 0.50%, 15 Gm Tube Item404 1 15 Gm Tube 408 1.407 447- Chlorhexidine Gluconate Solution 5%, 250 Ml Bottle Item405 1 250 Ml Bottle 409 1.408 244- Compound Benzoin Tincture, 500 Ml Bottle Item406 1 500 Ml Bottle 410 1.409 245- Formaldehyde Solution, 450 Ml Bottle Item407 1 450 Ml Bottle 411 1.41 246- Gentian Violet Solution 1%, 200 Ml Bottle Item408 1 200 Ml Bottle 412 1.411 247- Glutaraldehyde Solution 2%, 5 Lit Can Item409 1 5 Lit Can 413 1.412 248- Hydrogen Peroxide Solution 6%, 400 Ml Bottle Item410 1 400 Ml Bottle 414 1.413 249- Lysol ( Cresol With Soap Solution ) ( Cresol 50% + Soap 50% ) , 5 Lit Can Item411 1 5 Lit Can 415 1.414 222- Povidone Iodine Solution 5%, 500 Ml Bottle Item412 1 500 Ml Bottle 416 1.415 450- Povidone Iodine Solution 5%, 100 Ml Bottle Item413 1 100 Ml Bottle 417 1.416 572- Povidone Iodine Solution 10%, 100 Ml Bottle Item414 1 100 Ml Bottle 418 1.417 250- Povidone Iodine Scrub Solution / Cleansing Solution 7.5% W / V Npovidone Iodine 7.5%, 500 Ml Bottle Item415 1 500 Ml Bottle 419 1.418 221- Povidone Iodine Ointment 5%, 15 Gm Tube Item416 1 15 Gm Tube 420 1.419 571- Povidone Iodine Ointment 5%, 250 Gm Pack Item417 1 250 Gm Pack 421 1.42 224- Silver Sulphadiazine Cream 1%, 50 Gm Tube Item418 1 50 Gm Tube 422 1.421 573- Silver Sulphadiazine Cream 1%, 500 Gm Jar Item419 1 500 Gm Jar 423 1.422 252- Surgical Spirit Bp, 500 Ml Bottle Item420 1 500 Ml Bottle 424 1.423 449- Surgical Spirit Bp, 100 Ml Bottle Item421 1 100 Ml Bottle 425 1.424 16. Diuretics 426 1.425 253- Acetazolamide Tablet 250 Mg, 10 Tab Item423 1 10 Tab 427 1.426 254- Furosemide Tablet 40 Mg, 10 Tab Item424 1 10 Tab 428 1.427 255- Furosemide Injection 10 Mg / Ml, 2 Ml Amp Item425 1 2 Ml Amp 429 1.428 256- Hydrochlorthiazide Tablet 12.5 Mg, 10 Tab Item426 1 10 Tab 430 1.429 464- Hydrochlorthiazide Tablet 25 Mg, 10 Tab Item427 1 10 Tab 431 1.43 257- Mannitol Injection 20%, 100 Ml Bottle Item428 1 100 Ml Bottle 432 1.431 258- Spironolactone Tablet 25 Mg, 10 Tab Item429 1 10 Tab 433 1.432 574- Spironolactone Tablet 50 Mg, 10 Tab Item430 1 10 Tab 434 1.433 259- Torsemide Tablet 10 Mg, 10 Tab Item431 1 10 Tab 435 1.434 471- Torsemide Injection 10 Mg / Ml, 2 Ml Amp Item432 1 2 Ml Amp 436 1.435 17. Drugs For Ear Ailments 437 1.436 585- Ciprofloxacin And Dexamethasone Ear Drops N0.3% + 0.1%, 5 Ml Vial Item434 1 5 Ml Vial 438 1.437 586- Clotrimazole With Beclomethasone Drops 1%, 5 Ml Vial Item435 1 5 Ml Vial 439 1.438 588- Neomycin- Hydrocortisone & Polymixin B Ear Drops, 5 Ml Vial Item436 1 5 Ml Vial 440 1.439 589- Wax Dissolving Ear Drops: Paradichlorobenzene - Benzocaine - Nchlorobutanol - Turpentine Oil 2% + 2.7% + 5% + 15%, 10 Ml Bottle Item437 1 10 Ml Bottle 441 1.44 18. Gastro Intestinal Drugs 442 1.441 18.1 Antacid 443 1.442 260- Antacid Tablet, 10 Tab Item440 1 10 Tab 444 1.443 261- Antacid Liquid, 60 Ml Bottle Item441 1 60 Ml Bottle 445 1.444 18.2 Anti-Ulcer 446 1.445 272- Omeprazole Capsule 20 Mg, 10 Cap Item443 1 10 Cap 447 1.446 275- Pantoprazole Injection 40 Mg, Vial Item444 1 Vial 448 1.447 596- Pantoprazole & Domperidone Sr Capsule 40Mg+ 30Mg, 10 Cap Item445 1 10 Cap 449 1.448 276- Ranitidine Hcl Injection 50 Mg / 2Ml, 2 Ml Amp Item446 1 2 Ml Amp 450 1.449 277- Ranitidine Tablet 150 Mg, 10 Tab Item447 1 10 Tab 451 1.45 433- Ranitidine Tablet 300 Mg, 10 Tab Item448 1 10 Tab 452 1.451 18.3 Abdominal Colic & Antispasmodic 453 1.452 263- Dicyclomine Tablet 10 Mg, 10 Tab Item450 1 10 Tab 454 1.453 264- Dicyclomine Injection 10 Mg / Ml, 2 Ml Amp Item451 1 2 Ml Amp 455 1.454 265- Dicyclomine Hydrochloride Oral Solution 10 Mg / 5Ml, 30 Ml Bottle Item452 1 30 Ml Bottle 456 1.455 438- Dicyclomine Hydrochloride And Activated Dimethicone Suspension N10mg + 40Mg Per Ml, 10 Ml Bottle Item453 1 10 Ml Bottle 457 1.456 439- Dicyclomine And Paracetamol Tablet 20Mg + 325Mg, 10 Tab Item454 1 10 Tab 458 1.457 415- Drotaverine Tablet 40 Mg, 10 Tab Item455 1 10 Tab 459 1.458 5- Drotaverine Hydrochloride Injection 40 Mg / 2Ml, 2 Ml Amp Item456 1 2 Ml Amp 460 1.459 591- Drotaverine & Mefenamic Acid Tablet 80 Mg + 250 Mg, 10 Tab Item457 1 10 Tab 461 1.46 414- Hyoscine Butylbromide Tablet 10 Mg, 10 Tab Item458 1 10 Tab 462 1.461 268- Hyoscine Butylbromide Injection 20 Mg / Ml, 1 Ml Amp Item459 1 1 Ml Amp 463 1.462 18.4 Antiemetic 464 1.463 270- Metoclopramide Injection 10 Mg / 2Ml, 2 Ml Amp Item461 1 2 Ml Amp 465 1.464 271- Metoclopramide Tablet 10 Mg, 10 Tab Item462 1 10 Tab 466 1.465 478- Metoclopramide Syrup 5 Mg / 5Ml, 30 Ml Bottle Item463 1 30 Ml Bottle 467 1.466 267- Domperidone Tablet 10 Mg, 10 Tab Item464 1 10 Tab 468 1.467 590- Domperidone Oral Drops 10 Mg / Ml, 10 Ml Bottle Item465 1 10 Ml Bottle 469 1.468 266- Domperidone Suspension 5 Mg / 5Ml, 30 Ml Bottle Item466 1 30 Ml Bottle 470 1.469 595- Ondansetron Md Tablet 4 Mg, 10 Tab Item467 1 10 Tab 471 1.47 273- Ondansetron Injection 2 Mg / Ml, 2 Ml Amp Item468 1 2 Ml Amp 472 1.471 18.5 Drugs For Constipation, Diarrhoea, Piles 473 1.472 262- Bisacodyl Tablet 5 Mg, 10 Tab Item470 1 10 Tab 474 1.473 592- Lactic Acid Bacillus Tablet 60 Million Spores, 10 Tab Item471 1 10 Tab 475 1.474 593- Lactulose Solution 10Gm / 15Ml, 100 Ml Bottle Item472 1 100 Ml Bottle 476 1.475 594- Liquid Paraffin Ip, 100 Ml Bottle Item473 1 100 Ml Bottle 477 1.476 218- Liquid Paraffin Ip, 400 Ml Bottle Item474 1 400 Ml Bottle 478 1.477 269- Loperamide Tablet 2 Mg, 10 Tab Item475 1 10 Tab 479 1.478 274- Ors Powder, Pouches 20.5Gms Item476 1 Pouches 20.5Gms 480 1.479 219- Ointment Containing : Lidocaine 3%- Zinc Oxide 5% - Hydrocortisone N0.25%- Allantoin 0.5%, 15 Gm Tube Item477 1 15 Gm Tube 481 1.48 278- Sodium Phosphates Enema Bp, 100 Ml Item478 1 100 Ml 482 1.481 18.6 Drugs For Gall Stones 483 1.482 597- Ursodeoxycholic Acid Tablet 300 Mg, 10 Tab Item480 1 10 Tab 484 1.483 19. Hormones, Other Endocrine Drugs 485 1.484 19.1 Antidiabetics 486 1.485 279- Biphasic Isophane Insulin Injection 30 / 70 ( 30% Soluble Insulin & 70% Isophane Insulin ) 40 Iu / Ml, 10 Ml Vial Item483 1 10 Ml Vial 487 1.486 294- Isophane Insulin Injection 40 Iu / Ml, 10 Ml Vial Item484 1 10 Ml Vial 488 1.487 300- Soluble Insulin Injection 40 Iu / Ml, 10 Ml Vial Item485 1 10 Ml Vial 489 1.488 287- Glibenclamide Tablet 5 Mg, 10 Tab Item486 1 10 Tab 490 1.489 288- Gliclazide Tablet 40 Mg, 10 Tab Item487 1 10 Tab 491 1.49 289- Glimepiride Tablet 2 Mg, 10 Tab Item488 1 10 Tab 492 1.491 290- Glimepiride Tablet 1 Mg, 10 Tab Item489 1 10 Tab 493 1.492 291- Glipizide Tablet 5 Mg, 10 Tab Item490 1 10 Tab 494 1.493 295- Metformin Tablet 500 Mg, 10 Tab Item491 1 10 Tab 495 1.494 297- Pioglitazone Tablet 15 Mg, 10 Tab Item492 1 10 Tab 496 1.495 451- Metformin Hydrochloride Sr Tablet 1000 Mg, 10 Tab Item493 1 10 Tab 497 1.496 452- Glipizide And Metformin Hydrochloride Tablet 5 Mg + 500 Mg, 10 Tab Item494 1 10 Tab 498 1.497 453- Glibenclamide And Metformin Hydrochloride ( Sr ) Tablet 5 Mg + 500 Nmg, 10 Tab Item495 1 10 Tab 499 1.498 454- Metformin Hydrochloride ( Sr ) And Glimepiride Tablet 500 Mg + 1 Mg, 10 Tab Item496 1 10 Tab 500 1.499 455- Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablet N500 Mg + 2 Mg, 10 Tab Item497 1 10 Tab 501 1.5 456- Glimepiride- Pioglitazone And Metformin Hydrochloride ( Sr ) Tablet N2mg + 15Mg + 500Mg, 10 Tab Item498 1 10 Tab 502 1.501 603- Gliclazide And Metformin Tablet 80 Mg + 500 Mg, 10 Tab Item499 1 10 Tab 503 1.502 680- Insulin Glargine Injection, 3Ml Vial Item500 1 3Ml Vial 504 1.503 681- Insulin Glargine Injection, 5Ml Vial Item501 1 5Ml Vial 505 1.504 682- Tenaligliptin Tablet 20Mg, 10 Tab. Item502 1 10 Tab. 506 1.505 19.2 Female Hormonal Preparations 507 1.506 281- Carboprost Tromethamine Injection 0.25 Mg / Ml, 1 Ml Amp Item504 1 1 Ml Amp 508 1.507 282- Clomiphene Tablet 25 Mg, 10 Tab Item505 1 10 Tab 509 1.508 283- Clomiphene Tablet 50 Mg, 10 Tab Item506 1 10 Tab 510 1.509 284- Conjugated Estrogen Tablet 0.625 Mg, 10 Tab Item507 1 10 Tab 511 1.51 285- Dinoprostone Cream 0.5 Mg, Syringe Item508 1 Syringe 512 1.511 286- Ethinyloestradiol Tablet 50 Mcg, 10 Tab Item509 1 10 Tab 513 1.512 293- Hydroxyprogesterone Injection 250 Mg / Ml, 1 Ml Amp Item510 1 1 Ml Amp 514 1.513 296- Norethisterone Tablet 5 Mg, 10 Tab Item511 1 10 Tab 515 1.514 298- Progesterone Injection 200 Mg / 2Ml, 2 Ml Amp Item512 1 2 Ml Amp 516 1.515 605- Medroxyprogesterone Acetate Tablet 10 Mg, 10 Tab Item513 1 10 Tab 517 1.516 19.3 Thyroid & Anti-Thyroid 518 1.517 280- Carbimazole Tablet 5 Mg, 10 Tab Item515 1 10 Tab 519 1.518 301- Thyroxine Sodium Tablet 100 Mcg, 10 Tab Item516 1 10 Tab 520 1.519 607- Thyroxine Sodium Tablet 50 Mcg, 10 Tab Item517 1 10 Tab 521 1.52 19.5 Others 522 1.521 604- Glucagon Injection 1 Mg / Ml, 1 Ml Vial Item519 1 1 Ml Vial 523 1.522 608- Octreotide Injection 50 Mcg / Ml, 1 Ml Amp Item520 1 1 Ml Amp 524 1.523 20.1 Anti D Immunoglobulin 525 1.524 303- Human Anti D Immunoglobulin Injection ( Im Use ) 300 Mcg, Pfs / Vial Item522 1 Pfs / Vial 526 1.525 304- Human Anti D Immunoglobulin 150 Mcg, 1 Ml Vial Item523 1 1 Ml Vial 527 1.526 20.2 Anti Rabies & Anti Snake Venum 528 1.527 305- Human Rabies Immunoglobulin Injection 150 Iu / Ml, 2 Ml Vial Item525 1 2 Ml Vial 529 1.528 306- Rabies Vaccine Human ( Cell Culture ) ( Intradermal ) 2.5 Iu, 1 Ml Vial With 1.0 Nml Diluent Item526 1 1 Ml Vial With 1.0 Nml Diluent 530 1.529 307- Rabies Vaccine Human ( Cell Culture ) ( Intramuscular ) 2.5 Iu / Dose, Single Dose Vial Item527 1 Single Dose Vial 531 1.53 408- Rabies Antiserum Ip ( Equine ) ( I.M. / Sc Use ) 300 Units / Ml, 5 Ml Vial Item528 1 5 Ml Vial 532 1.531 308- Snake Venom Anti Serum ( Polyvalent Anti Snake Venom ) Lyophillized, 10 Ml Vial Item529 1 10 Ml Vial 533 1.532 20.3 Others 534 1.533 633- Normal Human Intravenous Immunoglobulin 5G / 100Ml, 100 Ml Vial Item531 1 100 Ml Vial 535 1.534 309- Tetanus Immunoglobulin 250 Iu, Vial / Ampoule Item532 1 Vial / Ampoule 536 1.535 310- Tetanus Vaccine ( Adsorbed ) Ip, 5 Ml Vial Item533 1 5 Ml Vial 537 1.536 480- Diphtheria Antitoxin 10- 000 Iu, Vial Item534 1 Vial 538 1.537 21. Neuromuscular Blockers & Cholinesterase Inhibitors 539 1.538 311- Atracurium Injection 10 Mg / Ml, 2.5 Ml Amp Item536 1 2.5 Ml Amp 540 1.539 312- Glycopyrrolate Injection 0.2 Mg / Ml, 1 Ml Amp Item537 1 1 Ml Amp 541 1.54 314- Neostigmine Injection 0.5 Mg / Ml, 1 Ml Amp Item538 1 1 Ml Amp 542 1.541 638- Neostigmine Injection 2.5 Mg / 5Ml, 5 Ml Amp Item539 1 5 Ml Amp 543 1.542 316- Neostigmine Tablet 15 Mg, 10 Tab Item540 1 10 Tab 544 1.543 317- Succinylcholine Injection 50 Mg / Ml, 10 Ml Vial Item541 1 10 Ml Vial 545 1.544 318- Valethamate Bromide Inj 8Mg / Ml, 1 Ml Amp Item542 1 1 Ml Amp 546 1.545 419- Vecuronium Bromide For Injection ( Freeze Dried ) 4 Mg, Vial / Amp Item543 1 Vial / Amp 547 1.546 22. Ophthalmological Preparations 548 1.547 22.1 Anti Fungal 549 1.548 425- Fluconazole Eye Drops 0.3%, 5 Ml Vial Item546 1 5 Ml Vial 550 1.549 22.2 Anti Inflammatory 551 1.55 421- Flurbiprofen Sodium Ophthalmic Solution 0.03%, 5 Ml Vial Item548 1 5 Ml Vial 552 1.551 22.3 Anti Glaucoma 553 1.552 612- Betaxolol Hcl Drops 0.50%, 5 Ml Vial Item550 1 5 Ml Vial 554 1.553 487- Brimonidine Tartrate And Timolol Eye Drops 0.15% + 0.5%, 5 Ml Vial Item551 1 5 Ml Vial 555 1.554 614- Phenylephrine Drops 5%, 5 Ml Vial Item552 1 5 Ml Vial 556 1.555 484- Timolol Eye Drops 0.50%, 5 Ml Vial Item553 1 5 Ml Vial 557 1.556 486- Travoprost Ophthalmic Solution 0.004%, 3 Ml Vial Item554 1 3 Ml Vial 558 1.557 22.4 Pupillary Dialators / Constrictors 559 1.558 319- Atropine Eye Ointment 1%, 3 Gm Tube Item556 1 3 Gm Tube 560 1.559 320- Atropine Sulphate Ophthalmic Solution 1%, 5 Ml Vial Item557 1 5 Ml Vial 561 1.56 485- Homatropine Eye Drops 2%, 5 Ml Vial Item558 1 5 Ml Vial 562 1.561 326- Pilocarpine Hydrochloride Eye Drop 2%, 5 Ml Vial Item559 1 5 Ml Vial 563 1.562 241- Tropicamide Eye Drops 1%, 5 Ml Vial Item560 1 5 Ml Vial 564 1.563 22.5 Antibiotic 565 1.564 321- Chloramphenicol Eye Drops 0.05%, 5 Ml Vial Item562 1 5 Ml Vial 566 1.565 322- Ciprofloxacin Eye Drops 0.30%, 5 Ml Vial Item563 1 5 Ml Vial 567 1.566 323- Ciprofloxacin Ophthalmic Ointment 0.30%, 5 Gm Tube Item564 1 5 Gm Tube 568 1.567 330- Tobramycin And Dexamethasone Ophthalmic Suspension 0.30%+0.10%, 5 Ml Vial Item565 1 5 Ml Vial 569 1.568 331- Tobramycin Eye Drops 0.30%, 5 Ml Vial Item566 1 5 Ml Vial 570 1.569 332- Tobramycin Ophthalmic Ointment 0.30%, 5 Gm Tube Item567 1 5 Gm Tube 571 1.57 22.6 Local Anaesthetic 572 1.571 424- Lidocaine Hydrochloride Topical Solution 4%, 30 Ml Vial Item569 1 30 Ml Vial 573 1.572 22.7 Others 574 1.573 613- Carboxymethylcellulose Sodium Lubricant Eye Drops 0.50%, 10 Ml Vial Item571 1 10 Ml Vial 575 1.574 423- Hyaluronidase Injection 1500 Iu, Vial Item572 1 Vial 576 1.575 324- Hydroxypropylmethyl Cellulose Solution With Prefilled Glass Syringe With Cannula 20 Mg / Ml, 2 Ml Pfs Item573 1 2 Ml Pfs 577 1.576 23. Drugs Acting On Uterus 578 1.577 333- Isoxsuprine Injection 5 Mg / Ml, 2 Ml Amp Item575 1 2 Ml Amp 579 1.578 334- Isoxsuprine Tablet 20 Mg, 10 Tab Item576 1 10 Tab 580 1.579 335- Methylergometrine Injection 0.2 Mg / Ml, 1 Ml Amp Item577 1 1 Ml Amp 581 1.58 336- Methylergometrine Tablet 0.125 Mg, 10 Tab Item578 1 10 Tab 582 1.581 337- Misoprostol Tablet 200 Mcg, 10 Tab Item579 1 10 Tab 583 1.582 615- Mifepristone Tablet 200 Mg, Single Tab Item580 1 Single Tab 584 1.583 338- Oxytocin Injection 5 Iu / Ml, 1 Ml Amp Item581 1 1 Ml Amp 585 1.584 24. Psychotropic Drugs 586 1.585 24.1 Anti Psychotics 587 1.586 342- Chloridazepoxide Tablet 10 Mg, 10 Tab Item584 1 10 Tab 588 1.587 343- Chlorpromazine Tablet 100 Mg, 10 Tab Item585 1 10 Tab 589 1.588 344- Chlorpromazine Tablet 25 Mg, 10 Tab Item586 1 10 Tab 590 1.589 345- Chlorpromazine Tablet 50 Mg, 10 Tab Item587 1 10 Tab 591 1.59 346- Chlorpromazine Injection 25 Mg / Ml, 2 Ml Amp Item588 1 2 Ml Amp 592 1.591 353- Haloperidol Injection 5 Mg / Ml, 1 Ml Amp Item589 1 1 Ml Amp 593 1.592 354- Haloperidol Tablet 1.5 Mg, 10 Tab Item590 1 10 Tab 594 1.593 355- Haloperidol Tablet 5 Mg, 10 Tab Item591 1 10 Tab 595 1.594 360- Olanzapine Tablet 5 Mg, 10 Tab Item592 1 10 Tab 596 1.595 361- Risperidone Tablet 2 Mg, 10 Tab Item593 1 10 Tab 597 1.596 362- Risperidone Tablet 1 Mg, 10 Tab Item594 1 10 Tab 598 1.597 364- Trifluperazine Tablet 5 Mg, 10 Tab Item595 1 10 Tab 599 1.598 674- Quetiapine Tablet 50Mg, 10 Tab Item596 1 10 Tab 600 1.599 675- Quetiapine Tablet 25Mg, 10 Tab Item597 1 10 Tab 601 1.6 24.2 Anti Depressants 602 1.601 341- Amitriptyline Tablet 25 Mg, 10 Tab Item599 1 10 Tab 603 1.602 351- Escitalopram Tablet 10 Mg, 10 Tab Item600 1 10 Tab 604 1.603 352- Fluoxetine Capsule 20 Mg, 10 Cap Item601 1 10 Cap 605 1.604 356- Imipramine Tablet 25 Mg, 10 Tab Item602 1 10 Tab 606 1.605 357- Imipramine Tablet 75 Mg, 10 Tab Item603 1 10 Tab 607 1.606 358- Lithium Carbonate Tablet 300 Mg, 10 Tab Item604 1 10 Tab 608 1.607 363- Sertraline Tablet 50 Mg, 10 Tab Item605 1 10 Tab 609 1.608 24.3 Sedatives & Tranquilizers 610 1.609 339- Alprazolam Tablet 0.25 Mg, 10 Tab Item607 1 10 Tab 611 1.61 340- Alprazolam Tablet 0.5 Mg, 10 Tab Item608 1 10 Tab 612 1.611 678- Clonazepam Tablet 0.5 Mg, 10 Tab Item609 1 10 Tab 613 1.612 349- Diazepam Injection 10 Mg / 2Ml, 2 Ml Amp Item610 1 2 Ml Amp 614 1.613 350- Diazepam Tablet 5 Mg, 10 Tab Item611 1 10 Tab 615 1.614 359- Lorazepam Injection 2 Mg / Ml, 2 Ml Amp Item612 1 2 Ml Amp 616 1.615 25. Drugs Acting On The Respiratory Tract 617 1.616 25.1 Anti Asthmatic 618 1.617 365- Aminophylline Injection 25 Mg / Ml, 10 Ml Amp Item615 1 10 Ml Amp 619 1.618 366- Beclomethasone Inhalation 200 Mcg / Dose, 200 Metered Doses Ncontainer Item616 1 200 Metered Doses Ncontainer 620 1.619 367- Budesonide Nebulizer Suspension 0.25 Mg / Ml, 2 Ml Amp Item617 1 2 Ml Amp 621 1.62 617- Budesonide Rotacap 200 Mcg, 30 Capsule N ( Rotacaps ) Item618 1 30 Capsule N ( Rotacaps ) 622 1.621 369- Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml, 15 Ml Vial Item619 1 15 Ml Vial 623 1.622 618- Ipratropium Rotacap 40 Mcg, 30 Capsule ( Rotacaps ) Item620 1 30 Capsule ( Rotacaps ) 624 1.623 370- Salbutamol Tablet 4 Mg, 10 Tab Item621 1 10 Tab 625 1.624 371- Salbutamol Inhalation 100 Mcg / Dose, 200 Metered Doses Ncontainer Item622 1 200 Metered Doses Ncontainer 626 1.625 372- Salbutamol Nebuliser Solution 5 Mg / Ml, 10 Ml Vial Item623 1 10 Ml Vial 627 1.626 373- Salbutamol Tablet 2 Mg, 10 Tab Item624 1 10 Tab 628 1.627 432- Salbutamol Syrup 2 Mg / 5Ml, 100 Ml Bottle Item625 1 100 Ml Bottle 629 1.628 619- Terbutaline Sulphate Tablet 2.5 Mg, 10 Tab Item626 1 10 Tab 630 1.629 374- Theophylline And Etophylline Injection 50.6Mg + 169.4Mg, 2 Ml Amp Item627 1 2 Ml Amp 631 1.63 375- Theophylline And Etophylline Tablet 23Mg + 77Mg, 10 Tab Item628 1 10 Tab 632 1.631 376- Theophylline Prolonged Release / Sustained Release / Controlled, 10 Tab Item629 1 10 Tab 633 1.632 616- Formoterol & Budesonide Rotacap 6 Mcg+ 200 Mcg, 30 Capsule N ( Rotacaps ) Item630 1 30 Capsule N ( Rotacaps ) 634 1.633 25.2 Antitussives 635 1.634 368- Cough Syrup [ Each 5Ml Contains Chlorpheniramine Maleate 3Mg Ammonium Chloride 130Mg- Sodium Citrate 65 Mg- Menthol 0.5 Mg ] , 50 Ml Bottle Item632 1 50 Ml Bottle 636 1.635 440- Dextromethorphan Hydrobromide Syrup 13.5 Mg / 5Ml, 30 Ml Bottle Item633 1 30 Ml Bottle 637 1.636 25.3 Local Decongestant 638 1.637 442- Saline Nasal Solution ( Drops ) 0.65%, 10 Ml Bottle Item635 1 10 Ml Bottle 639 1.638 620- Xylometazoline Nasal Drops 0.1%, 5 Ml Vial Item636 1 5 Ml Vial 640 1.639 26. Solutions Correcting Water, Electrolyte & Acid Base Disturbance 641 1.64 377- Compound Sodium Lactate Injection, 500 Ml Bottle Item638 1 500 Ml Bottle 642 1.641 378- Dextrose Injection 25%, 100 Ml Bottle Item639 1 100 Ml Bottle 643 1.642 379- Dextrose Injection 10%, 500 Ml Bottle Item640 1 500 Ml Bottle 644 1.643 380- Dextrose Injection 5%, 500 Ml Bottle Item641 1 500 Ml Bottle 645 1.644 381- Multiple Electrolytes & Dextrose Injection Type I Ip ( Electrolyte P Injection ) , 500 Ml Bottle Item642 1 500 Ml Bottle 646 1.645 382- Multiple Electrolytes & Dextrose Injection Type Iii Ip ( Electrolyte M Injection ) , 500 Ml Bottle Item643 1 500 Ml Bottle 647 1.646 383- Potassium Chloride Injection 0.15 Gm / Ml 0.15 Gm / Ml, 10 Ml Amp Item644 1 10 Ml Amp 648 1.647 384- Potassium Chloride Oral Solution 500 Mg / 5Ml, 200 Ml Bottle Item645 1 200 Ml Bottle 649 1.648 385- Sodium Chloride And Dextrose Injection 0.9 % + 5 %, 500 Ml Bottle Item646 1 500 Ml Bottle 650 1.649 386- Sodium Chloride Injection, 500 Ml Bottle Item647 1 500 Ml Bottle 651 1.65 621- Sodium Chloride Injection, 100 Ml Bottle Item648 1 100 Ml Bottle 652 1.651 27.Drugs For Urology 653 1.652 575- Finasteride Tablet 5 Mg, 10 Tab Item650 1 10 Tab 654 1.653 576- Tamsulosin Hcl Tablet 0.4 Mg, 10 Tab Item651 1 10 Tab 655 1.654 577- Terazosin Tablet 1 Mg, 10 Tab Item652 1 10 Tab 656 1.655 578- Terazosin Tablet 2 Mg, 10 Tab Item653 1 10 Tab 657 1.656 579- Flavoxate Tablet 200 Mg, 10 Tab Item654 1 10 Tab 658 1.657 28.Antivertigo 659 1.658 541- Betahistine Tablet 8 Mg, 10 Tab Item656 1 10 Tab 660 1.659 542- Betahistine Tablet 16 Mg, 10 Tab Item657 1 10 Tab 661 1.66 543- Cinnarizine Tablet 25 Mg, 10 Tab Item658 1 10 Tab 662 1.661 544- Cinnarizine Tablet 75 Mg, 10 Tab Item659 1 10 Tab 663 1.662 29. Vitamins & Minerals 664 1.663 387- Ascorbic Acid Tablet 500 Mg, 10 Tab Item661 1 10 Tab 665 1.664 388- Calcium Gluconate Injection 10%, 10 Ml Amp Item662 1 10 Ml Amp 666 1.665 622- Calcium & Vitamin D3 Tablet 500 Mg + 250 Iu, 10 Tab Item663 1 10 Tab 667 1.666 441- Calcium & Vitamin D3 Suspension 250Mg + 125 Iu, 100 Ml Bottle Item664 1 100 Ml Bottle 668 1.667 630- Calcitriol Capsule 0.25Mcg, 10 Cap Item665 1 10 Cap 669 1.668 623- Cholecalciferol Granules 60- 000 Iu / 1Gm, 1 Gm Sachet Item666 1 1 Gm Sachet 670 1.669 390- Ferrous Sulphate And Folic Acid Tablet 100 Mg + 0.5 Mg, 10 Tab Item667 1 10 Tab 671 1.67 391- Ferrous Sulphate With Folic Acid Tab. ( Paediatric ) 20 Mg + 0.1 Mg, 10 Tab Item668 1 10 Tab 672 1.671 392- Folic Acid Tablet Ip 5 Mg, 10 Tab Item669 1 10 Tab 673 1.672 448- Iron And Folic Acid Syrup 100 Mg + 0.5 Mg Per 5 Ml, 100 Ml Bottle Item670 1 100 Ml Bottle 674 1.673 488- Iron Sucrose Injection 20 Mg / Ml, 5 Ml Amp Item671 1 5 Ml Amp 675 1.674 624- Mecobalamin Injection 500 Mcg / Ml, 1 Ml Amp Item672 1 1 Ml Amp 676 1.675 393- Multivitamin Drops, 15 Ml Bottle Item673 1 15 Ml Bottle 677 1.676 394- Multivitamin Tablet, 10 Tab Item674 1 10 Tab 678 1.677 626- Pyridoxine Tablet 10 Mg, 10 Tab Item675 1 10 Tab 679 1.678 627- Pyridoxine Tablet 40 Mg, 10 Tab Item676 1 10 Tab 680 1.679 629- Thiamine Tablet 100 Mg, 10 Tab Item677 1 10 Tab 681 1.68 409- Vitamin A Solution 1 Lac Iu / Ml, 100 Ml Bottle Item678 1 100 Ml Bottle 682 1.681 397- Vitamin B Complex Tablet Nfi ( Prophylactic ) , 10 Tab Item679 1 10 Tab 683 1.682 395- Vitamin B Complex Injection Nfi, 10 Ml Vial Item680 1 10 Ml Vial 684 1.683 472- Zinc Sulphate Dispersible Tablet 10 Mg, 10 Tab Item681 1 10 Tab 685 1.684 652- Methylcobalmin Tablet 500Mg, 10 Tab Item682 1 10 Tab 686 1.685 653- Methylcobalmin Tablet 1500Mg, 10 Tab Item683 1 10 Tab 687 1.686 676- Vitamin D3 Oral Solution Syrup 60000 Iu, 5Ml Syrup Item684 1 5Ml Syrup 688 1.687 30. Miscellaneous Drugs 689 1.688 147- Flunarizine Tablet 5 Mg, 10 Tab Item686 1 10 Tab 690 1.689 398- Black Disinfectant Fluid ( Phenyl ) N ( As Per Schedule O Grade - Iii, 5 Lit Can Item687 1 5 Lit Can 691 1.69 399- Concentrated Haemodialysis Fluid B.P, 10 Ltrs Item688 1 10 Ltrs 692 1.691 687- Hameodialysis Bicarbonate Solution, 10 Ltrs Item689 1 10 Ltrs 693 1.692 401- Peritonial Dialysis Solution Ip, 1000 Ml Pack Item690 1 1000 Ml Pack 694 1.693 402- Sodium Bicarbonate Injection 7.5%, 10 Ml Amp Item691 1 10 Ml Amp 695 1.694 404- Water For Injection Ip, 10 Ml Amp Item692 1 10 Ml Amp 696 1.695 631- Alendronate Tablet 35 Mg, 10 Tab Item693 1 10 Tab 697 1.696 632- Mannitol With Glycerin Injection 10% + 10%, 100 Ml Item694 1 100 Ml 698 1.697 635- Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) , 4 Ml Vial Item695 1 4 Ml Vial 699 1.698 639- Oseltamivir 75 Mg Capsule ( Each Capsule Contains Oseltamivir Nphosphate Equivalent To Oseltamivir 75 Mg ) , 10 Capsule Strip Item696 1 10 Capsule Strip 700 1.699 640- Oseltamivir 45 Mg Capsule ( Each Capsule Contains Oseltamivir Nphosphate Equivalent To Oseltamivir 45 Mg ) , 10 Capsule Strip Item697 1 10 Capsule Strip 701 1.7 641- Oseltamivir 30 Mg Capsule ( Each Capsule Contains Oseltamivir Nphosphate Equivalent To Oseltamivir 30 Mg ) , 10 Capsule Strip Item698 1 10 Capsule Strip 702 1.701 642- Oseltamivir Syrup Noseltamivir Phosphate For Oral Suspension 12 Mg / Ml. ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , 75 Ml Bottle With Measuring Cap Item699 1 75 Ml Bottle With Measuring Cap 703 1.702 644- Vitamin K-1 ( Phytomenadione ) 1 Mg / 0.5Ml Injection, 1 Mg / 0.5Ml Injection Item700 1 1 Mg / 0.5Ml Injection 704 1.703 List Of Surgical Items 705 1.704 S-1- Absorbable Gelatin Sponge Ip 66 80 Mm X 50 Mm X 10 Mm, Piece Item702 1 Piece 706 1.705 S-3- Asepto Syringe With Transparent Bulb Sterile- 60 Ml, Piece Item703 1 Piece 707 1.706 S-4- Blood Administration Set / Blood Transfusion Set, Unit Item704 1 Unit 708 1.707 S-5- Gloves Size 6 ½ Inches ( Sterile Surgical Disposable ) , Pair Item705 1 Pair 709 1.708 S-6- Gloves Size 7 Inches ( Sterile Surgical Disposable ) , Pair Item706 1 Pair 710 1.709 S-7- Gloves Size 7½ Inches ( Sterile Surgical Disposable ) , Pair Item707 1 Pair 711 1.71 S-8 ( A ) - Suction Catheter- Sterile. Size: Fg-5, Each Piece Item708 1 Each Piece 712 1.711 S-8 ( B ) - Suction Catheter- Sterile. Size: Fg- 6, Each Piece Item709 1 Each Piece 713 1.712 S-8 ( C ) - Suction Catheter- Sterile. Size: Fg- 8, Each Piece Item710 1 Each Piece 714 1.713 S-8 ( D ) - Suction Catheter- Sterile. Size: Fg- 10, Each Piece Item711 1 Each Piece 715 1.714 S-8 ( E ) - Suction Catheter- Sterile. Size: Fg- 12, Each Piece Item712 1 Each Piece 716 1.715 S-8 ( F ) - Suction Catheter- Sterile. Size: Fg- 14, Each Piece Item713 1 Each Piece 717 1.716 S-8 ( G ) - Suction Catheter- Sterile. Size: Fg- 16, Each Piece Item714 1 Each Piece 718 1.717 S-8 ( H ) - Suction Catheter- Sterile. Size: Fg- 18, Each Piece Item715 1 Each Piece 719 1.718 S-8 ( I ) - Suction Catheter- Sterile. Size: Fg- 20, Each Piece Item716 1 Each Piece 720 1.719 S-8 ( J ) - Suction Catheter- Sterile. Size: Fg- 22, Each Piece Item717 1 Each Piece 721 1.72 S-9 ( A ) - Catheter Size 8 ( Foleys Balloon Catheter Sterile- 2 Way Urinary Drainage Nsingle Use ) Silicon Coated Natural Latex Material- , Each Piece Item718 1 Each Piece 722 1.721 S-9 ( B ) - Catheter Size 10 ( Foleys Balloon Catheter Sterile- 2 Way Urinary Drainage Single Use ) Silicon Coated Natural Latex Material- , Each Piece Item719 1 Each Piece 723 1.722 S-9 ( C ) - Catheter Size 16 ( Foleys Balloon Catheter Sterile- 2 Way Urinary Ndrainage Single Use ) Silicon Coated Natural Latex Material- , Each Piece Item720 1 Each Piece 724 1.723 S-9 ( D ) - Catheter Size 18 ( Foleys Balloon Catheter Sterile- 2 Way Urinary Ndrainage Single Use ) Silicon Coated Natural Latex Material- , Each Piece Item721 1 Each Piece 725 1.724 S-9 ( E ) - Catheter Size 20 ( Foleys Balloon Catheter Sterile- 2 Way Urinary Ndrainage Single Use ) Silicon Coated Natural Latex Material- , Each Piece Item722 1 Each Piece 726 1.725 S-9 ( F ) - Catheter Size 22 ( Foleys Balloon Catheter Sterile- 2 Way Urinary Ndrainage Single Use ) Silicon Coated Natural Latex Material- , Each Piece Item723 1 Each Piece 727 1.726 S-9 ( G ) - Catheter Size 24 ( Foleys Balloon Catheter Sterile- 2 Way Urinary Ndrainage Single Use ) Silicon Coated Natural Latex Material- , Each Piece Item724 1 Each Piece 728 1.727 S-102- Catheter Size 14 ( Foleys Balloon Catheter Sterile 2 Way Urinary Ndrainage- Single Use- ) Silicon Coated Natural Latex Material, Each Piece Item725 1 Each Piece 729 1.728 S-103- K-90 Catheter, Each Piece Item726 1 Each Piece 730 1.729 S-10 ( A ) - Infant Feeding Tube Size:1Og, Each Piece Item727 1 Each Piece 731 1.73 S-10 ( B ) - Infant Feeding Tube Size:8G, Each Piece Item728 1 Each Piece 732 1.731 S-10 ( C ) - Infant Feeding Tube Size:5G, Each Piece Item729 1 Each Piece 733 1.732 S-11- Perfusion Set With Airway And Needle ( Adult Use ) - Sterile Disposable, Unit Item730 1 Unit 734 1.733 S-12- Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) - Sterile Disposable, Unit Item731 1 Unit 735 1.734 S-13- Infusion Set With Microdrip- Sterile Disposable ( Iv ) , Unit Item732 1 Unit 736 1.735 S-14- Insulin Syringe ( Graduation Upto 100 Units ) With ( Fixed ) 30 G Needle, Unit Item733 1 Unit 737 1.736 S-15 ( A ) - Sterile Disposable ( Single Use ) Ptfe I.V. Cannula With Integrated 3 Way Nstop Cock. Size 16G, Each Piece Item734 1 Each Piece 738 1.737 S-15 ( B ) - Sterile Disposable ( Single Use ) Ptfe I.V. Cannula With Integrated 3 Way Nstop Cock. Size 18G, Each Piece Item735 1 Each Piece 739 1.738 S-15 ( C ) - Sterile Disposable ( Single Use ) Ptfe I.V. Cannula With Integrated 3 Way Nstop Cock. Size 20G, Each Piece Item736 1 Each Piece 740 1.739 S-15 ( D ) - Sterile Disposable ( Single Use ) Ptfe I.V. Cannula With Integrated 3 Way Nstop Cock. Size 22G, Each Piece Item737 1 Each Piece 741 1.74 S-15 ( E ) - Sterile Disposable ( Single Use ) Ptfe I.V. Cannula With Integrated 3 Way Nstop Cock. Size 24G, Each Piece Item738 1 Each Piece 742 1.741 S-16- Mucus Extractor Sterile, Unit Item739 1 Unit 743 1.742 S-17 ( A ) - Nasal Oxygen Set- Twin Bore ( Accessory For Compressed Air Breathing ) For Adult Use, Each Piece Item740 1 Each Piece 744 1.743 S-17 ( B ) - Nasal Oxygen Set- Twin Bore ( Accessory For Compressed Air Breathing ) For Peadiatric Use, Each Piece Item741 1 Each Piece 745 1.744 S-18- Paper Adhesive Plaster 1 X 9.0 Mts ( With Cutter ) , Spool Item742 1 Spool 746 1.745 S-19- Paper Adhesive Plaster 2 X 9.0 Mts ( With Cutter ) , Spool Item743 1 Spool 747 1.746 S-20- Paper Adhesive Plaster 3 X 9.0 Mts ( With Cutter ) , Spool Item744 1 Spool 748 1.747 S-21- Plaster Of Paris Bandage Bp 15Cm X 2.7Mts / Roll, Spool Item745 1 Spool 749 1.748 S-22- Plaster Of Paris Bandage Bp10cm X 2.7Mts / Roll, Spool Item746 1 Spool 750 1.749 S-23 ( A ) - Ryles Tube / Nasogastric Tube ( P.V.C. ) With Radio Opaque Lining. Size: N10, Each Piece Item747 1 Each Piece 751 1.75 S-23 ( B ) - Ryles Tube / Nasogastric Tube ( P.V.C. ) With Radio Opaque Lining. Size: N12, Each Piece Item748 1 Each Piece 752 1.751 S-24 ( A ) - Ryles Tube / Nasogastric Tube ( P.V.C. ) With Radio Opaque Lining. Size: N14, Each Piece Item749 1 Each Piece 753 1.752 S-24 ( B ) - Ryles Tube / Nasogastric Tube ( P.V.C. ) With Radio Opaque Lining. Size: N16, Each Piece Item750 1 Each Piece 754 1.753 S-24 ( C ) - Ryles Tube / Nasogastric Tube ( P.V.C. ) With Radio Opaque Lining. Size: N18, Each Piece Item751 1 Each Piece 755 1.754 S-25 ( A ) - Scalp Vein Set ( Disposable ) Size 18G, Each Piece Item752 1 Each Piece 756 1.755 S-25 ( B ) - Scalp Vein Set ( Disposable ) Size 20G, Each Piece Item753 1 Each Piece 757 1.756 S-25 ( C ) - Scalp Vein Set ( Disposable ) Size 22G, Each Piece Item754 1 Each Piece 758 1.757 S-25 ( D ) - Scalp Vein Set ( Disposable ) Size 24G, Each Piece Item755 1 Each Piece 759 1.758 S-26- Syringe 2 Ml Hypodermic With Needle Attached 24G- Sterile- Single Use Disposable, Unit Item756 1 Unit 760 1.759 S-27- Syringe 5Ml Hypodermic With Needle Attached 24G- Sterile- Single Use Ndisposable, Unit Item757 1 Unit 761 1.76 S-28- Syringe 10 Ml Hypodermic With Needle Attached 22G- Sterile- Single Use Disposable, Unit Item758 1 Unit 762 1.761 S-29- Syringe 20 Ml Hypodermic With Needle Attached 22G- Sterile- Single Use Disposable, Unit Item759 1 Unit 763 1.762 S-30 ( A ) - Surgical Blade Sterile- Size 11, 100 Blades / Packet Item760 1 100 Blades / Packet 764 1.763 S-30 ( B ) - Surgical Blade Sterile- Size 15, 100 Blades / Packet Item761 1 100 Blades / Packet 765 1.764 S-30 ( C ) - Surgical Blade Sterile- Size 22, 100 Blades / Packet Item762 1 100 Blades / Packet 766 1.765 S-31- Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15, 6 Nos. / Pkt. Item763 1 6 Nos. / Pkt. 767 1.766 S-32- Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5, 6 Nos. / Pkt. Item764 1 6 Nos. / Pkt. 768 1.767 S-33- Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20, 6 Nos. / Pkt. Item765 1 6 Nos. / Pkt. 769 1.768 S-34- Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10, 6 Nos. / Pkt. Item766 1 6 Nos. / Pkt. 770 1.769 S-35- Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10, 6 Nos. / Pkt. Item767 1 6 Nos. / Pkt. 771 1.77 S-36- Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15, 6 Nos. / Pkt. Item768 1 6 Nos. / Pkt. 772 1.771 S-37- Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20, 6 Nos. / Pkt. Item769 1 6 Nos. / Pkt. 773 1.772 S-38- Suture Needles Curved And Cutting Size 1-5, 6 Nos. / Pkt Item770 1 6 Nos. / Pkt 774 1.773 S-39 ( A ) - Sterile Disposable Spinal Needle For Single Use. 22G, Each Piece Item771 1 Each Piece 775 1.774 S-39 ( B ) - Sterile Disposable Spinal Needle For Single Use.- 25G X 3 ½ Inch, Each Piece Item772 1 Each Piece 776 1.775 S-40- Urine Collecting Bag- Disposable 2000 Ml, Unit Item773 1 Unit 777 1.776 S-41- Double J Stent- Sterile- Both Ends Open - All Sizes, Each Piece Item774 1 Each Piece 778 1.777 S-42- Double J Stent- Sterile- One End Closed - All Sizes, Each Piece Item775 1 Each Piece 779 1.778 S-43 ( A ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 2.5, Each Piece Item776 1 Each Piece 780 1.779 S-43 ( B ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 3, Each Piece Item777 1 Each Piece 781 1.78 S-43 ( C ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 3.5, Each Piece Item778 1 Each Piece 782 1.781 S-43 ( D ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 4, Each Piece Item779 1 Each Piece 783 1.782 S-43 ( E ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 4.5, Each Piece Item780 1 Each Piece 784 1.783 S-43 ( F ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 5, Each Piece Item781 1 Each Piece 785 1.784 S-43 ( G ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 5.5, Each Piece Item782 1 Each Piece 786 1.785 S-43 ( H ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 6, Each Piece Item783 1 Each Piece 787 1.786 S-43 ( I ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 6.5, Each Piece Item784 1 Each Piece 788 1.787 S-43 ( J ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 7, Each Piece Item785 1 Each Piece 789 1.788 S-43 ( K ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 7.5, Each Piece Item786 1 Each Piece 790 1.789 S-43 ( L ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 8, Each Piece Item787 1 Each Piece 791 1.79 S-43 ( M ) - Endotracheal Tube- Plain With Radio-Opaque Line- Sterile- Single Use - Nsize 8.5, Each Piece Item788 1 Each Piece 792 1.791 S-44 ( A ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 4, Each Piece Item789 1 Each Piece 793 1.792 S-44 ( B ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 4.5, Each Piece Item790 1 Each Piece 794 1.793 S-44 ( C ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 5, Each Piece Item791 1 Each Piece 795 1.794 S-44 ( D ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 6, Each Piece Item792 1 Each Piece 796 1.795 S-44 ( E ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 6.5, Each Piece Item793 1 Each Piece 797 1.796 S-44 ( F ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 7, Each Piece Item794 1 Each Piece 798 1.797 S-44 ( G ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use -Size N7.5, Each Piece Item795 1 Each Piece 799 1.798 S-44 ( H ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 8, Each Piece Item796 1 Each Piece 800 1.799 S-44 ( I ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 8.5, Each Piece Item797 1 Each Piece 801 1.8 S-44 ( J ) - Endotracheal Tube- Cuff- With Radio-Opaque Line- Sterile- Single Use - Nsize 9, Each Piece Item798 1 Each Piece 802 1.801 S-45- Tracheostomy Tube ( Pvc ) - Plain- Sterile- Single Use - All Sizes, Each Piece Item799 1 Each Piece 803 1.802 S-46- Tracheostomy Tube ( Pvc ) - Cuffed- Sterile- Single Use - All Sizes, Each Piece Item800 1 Each Piece 804 1.803 S-47 ( A ) - Abdominal Drain Kit- Sterile- Having Drainage Catheter And Collection Nbag ( 2000 Ml ) Size 24, Each Piece Item801 1 Each Piece 805 1.804 S-47 ( B ) - Abdominal Drain Kit- Sterile- Having Drainage Catheter And Collection Nbag ( 2000 Ml ) Size 28, Each Piece Item802 1 Each Piece 806 1.805 S-47 ( C ) - Abdominal Drain Kit- Sterile- Having Drainage Catheter And Collection Nbag ( 2000 Ml ) Size 32, Each Piece Item803 1 Each Piece 807 1.806 S-48- Corrugated Drainage Sheet- Sterile- Multichannel- With Radio Opaque Line- Nsingle Use - All Sizes, Each Piece Item804 1 Each Piece 808 1.807 S-73- Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.5 Cm X 15 Cm, Piece Item805 1 Piece 809 1.808 S-74- Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm, Piece Item806 1 Piece 810 1.809 S-79- Sterilised Umbilical Cotton Tape Width 3 Mm- Length 75 Cm, Packet Item807 1 Packet 811 1.81 S-80- Bone Wax Sterilised, 2 Gm / Item808 1 2 Gm / 812 1.811 S-81- Temporary Cardiac Pacing Wire ( Electrode ) Sterile ½ Cir- Tapercut- 26 Nmm; Reverse Cutting 60 Mm, Sachet Item809 1 Sachet 813 1.812 S-82- Skin Graft Knife Blade ( Sterile ) ; And Handle ( Watson Modification Of Nhumby’S Knife And Blade For It ) , One Pack Neach Item810 1 One Pack Neach 814 1.813 S-84 ( A ) - K Wire- Length 375 Mm; 1Mm, Each Unit Item811 1 Each Unit 815 1.814 S-84 ( B ) - K Wire- Length 375 Mm;- 1.6Mm, Each Unit Item812 1 Each Unit 816 1.815 S-84 ( C ) - K Wire- Length 375 Mm; 1.8Mm, Each Unit Item813 1 Each Unit 817 1.816 S-85- Face Mask- Disposable, Piece Item814 1 Piece 818 1.817 S-86 ( A ) - Surgical Cap- Disposable For Doctors, Piece Item815 1 Piece 819 1.818 S-86 ( B ) - Surgical Cap- Disposable For Nurses, Piece Item816 1 Piece 820 1.819 S-87- Foldable Intra Ocular Lens With Injector N1. Made Of Hydrophilic Acrylic Material N2. Bi-Convex Single Piece Iol, Each Piece Item817 1 Each Piece 821 1.82 S-88- Standard Pama Intra Ocular Lenses N1. Pmma Optics And Haptics Single Piece With Hole N2. 6Mm Optic Size 12.5 To 13Mm Total Diameter N3. Loo Haptics – Modified C Shaped With 5° -10° Angulation., Each Piece Item818 1 Each Piece 822 1.821 S-89- Gloves Size 8 Inches Disposable Sterile Surgical, Pair Item819 1 Pair 823 1.822 S-90 ( A ) - Latex Examination Gloves Made Of Natural Rubber Latex. Non-Sterile- Ambidextous- Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Extra Small, Dispenser Box Of 100 Gloves Item820 1 Dispenser Box Of 100 Gloves 824 1.823 S-90 ( B ) - Latex Examination Gloves Made Of Natural Rubber Latex. Non-Sterile- Ambidextous- Aql 1.5 Micro Textured Powdered With Absorbable Dusting Npowder Usp. Small, Dispenser Nbox Of 100 Gloves Item821 1 Dispenser Nbox Of 100 Gloves 825 1.824 S-90 ( C ) - Latex Examination Gloves Made Of Natural Rubber Latex. Non-Sterile- Ambidextous- Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Medium, Dispenser Box Of 100 Gloves Item822 1 Dispenser Box Of 100 Gloves 826 1.825 S-90 ( D ) - Latex Examination Gloves Made Of Natural Rubber Latex. Non-Sterile- Ambidextous- Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Large, Dispenser Box Of 100 Gloves Item823 1 Dispenser Box Of 100 Gloves 827 1.826 S-91- Pressure Monitoring Line / High Pressure Extension Line ( Pmo Line ) Nlength 150 Cm- Prime Volume 1.40 Ml, Piece Item824 1 Piece 828 1.827 S-92- Urine Collecting Bag For New Born / Paediatric Urine Collection Bag- Capacity 100Ml, Piece Item825 1 Piece 829 1.828 S-93- Umbilical Catheter For New Born- Size -, Piece Item826 1 Piece 830 1.829 S-94- Umbilical Cord Clamp, Piece Item827 1 Piece 831 1.83 S-95- Absorbable Regenerated Cellulose Sheet, Piece Item828 1 Piece 832 1.831 S-96 ( A ) - Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) . Size Of Bellow 200 Ml- Catheter Size 16, Piece Item829 1 Piece 833 1.832 S-96 ( B ) - Close Wound Drainage Device Under Negative Pressure ( Closed Wound Nsuction Unit ) . Size Of Bellow 200 Ml- Catheter Size 18, Piece Item830 1 Piece 834 1.833 S-97- T-Tube For Common Bile Duct Drainage- Length 20X60 Cm- Size, Piece Item831 1 Piece 835 1.834 S-98- Bone Cement, 40 G Pack Item832 1 40 G Pack 836 1.835 S-99 ( A ) - Sanitary Pads ( Without Belt ) , Piece Item833 1 Piece 837 1.836 S-99 ( B ) - Sanitary Pads ( Belted ) , Piece Item834 1 Piece 838 1.837 S-99 ( P ) - Sanitary Pads ( Belt Less ) , Piece Item835 1 Piece 839 1.838 S-100- Oxygen Mask ( Adult ) , Each Piece Item836 1 Each Piece 840 1.839 S-101- Oxygen Mask ( Pediatric ) , Each Piece Item837 1 Each Piece 841 1.84 1. Absorbable Sutures 842 1.841 1.1 Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp, 843 1.842 R-1- Chromic ( 3 / 8 Cir Rb Needle 40Mm- Suture Nlength 76 Cm ) , 1 / 0 Item840 1 1 / 0 844 1.843 R-2- Chromic ( L / 2 Cir Rb Needle 20Mm- Length N76 Cm ) , 3 / 0 Item841 1 3 / 0 845 1.844 R-3- Chromic ( L / 2 Cir Rb Needle 30Mm- Length N76 Cm ) , 2 / 0 Item842 1 2 / 0 846 1.845 R-4- Chromic ( L / 2 Cir Rb Needle 30Mm- Length N76 Cm ) , 1 / 0 Item843 1 1 / 0 847 1.846 R-5- Chromic ( L / 2 Cir Rb Needle 40Mm- Length N76 Cm ) , 1 / 0 Item844 1 1 / 0 848 1.847 R-6- Chromic ( 3 / 8 Rb Needle 30Mm- Length 76 Ncm ) , 2 / 0 Item845 1 1 / 1 849 1.848 R-7- Chromic ( 1 / 2 Cir Rb Needle 45 Mm- Nlength 100 Cm ) , 1 Item846 1 1 / 2 850 1.849 R-8- Chromic ( 3 / 8 Cir Rcutting Needle 26Mm- Nlength 76 Cm ) , 3 / 0 Item847 1 1 / 3 851 1.85 R-76- Chromic Catgut Suture ( 3 / 8 Cir Rcutting Nneedle 16 Mm- Suture Length 76 Cm ) , 5 / 0 Item848 1 1 / 4 852 1.851 R-77- Chromic Catgut Suture ( 3 / 8 Cir Cutting Nneedle 8 Mm- Suture Length 35 Cm ) , 6 / 0 Item849 1 6 / 0 853 1.852 R-80- Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle- Suture Length 76 Ncm ) , 4 / 0 Item850 1 4 / 0 854 1.853 1.2 Absorbable Surgical Suture Usp ( Synthetic ) Sterilised Surgical Needled Suture ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co- L-Lactide ) 855 1.854 R-9- Absorbable Surgical Suture U.S.P. ( Synthetic ) 1 / 2 Cir Rb Needle 20Mm- Suture Nlength 70 Cm, 3 / 0 Item852 1 3 / 0 856 1.855 R-10- Absorbable Surgical Suture U.S.P. ( Synthetic ) 1 / 2 Cir Rb Needle 30Mm- Nlength 90 Cm, 2 / 0 Item853 1 3 / 1 857 1.856 R-11- Absorbable Surgical Suture U.S.P. ( Synthetic ) 1 / 2 Cir Rb Needle 30Mm- Length N90 Cm, 1 / 0 Item854 1 3 / 2 858 1.857 R-12- Absorbable Surgical Suture U.S.P. N ( Synthetic ) 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm- Suture Length 90 Cm, 1 Item855 1 3 / 3 859 1.858 R-13- Absorbable Surgical Suture U.S.P. N ( Synthetic ) 1 / 2 Cir Rb Needle 40Mm- Length 90 Cm, 1 Item856 1 3 / 4 860 1.859 R-14- Absorbable Surgical Suture U.S.P. ( Synthetic ) ( 1 / 2 Conventional Cutting N25mm Needle- Length 90 Cm ) Undyed, 3 / 0 Item857 1 3 / 5 861 1.86 R-15- Absorbable Surgical Suture U.S.P. ( Synthetic ) ( 1 / 2 Cir Rb Needle 20Mm- Nlength 70 Cm ) , 4 / 0 Item858 1 3 / 6 862 1.861 R-16- Absorbable Surgical Suture U.S.P. ( Synthetic ) ( 1 / 2 Cir Rb Needle 40Mm- Nlength 90 Cm ) , 2 / 0 Item859 1 3 / 7 863 1.862 R-17- Absorbable Surgical Suture U.S.P. N ( Synthetic ) ( 1 / 2 Cir Rb Needle 40Mm ) Length 90 Cm, 1 / 0 Item860 1 3 / 8 864 1.863 R-18- Absorbable Surgical Suture U.S.P. ( Synthetic ) 3 / 8 Circle Cutting Needle N22mm- Length 45 Cm, 3 / 0 Item861 1 3 / 9 865 1.864 R-19- Absorbable Surgical Suture U.S.P. ( Synthetic ) 3 / 8 Circle Cutting 16Mm Nneedle- Suture Length 70Cm, 4 / 0 Item862 1 3 / 10 866 1.865 2 Non Absorbable Surgical Suture Usp, 867 1.866 2.1 Black - Braided Silk With Nneedle 868 1.867 R-20- B.B Silk ( 1 / 2 Cir Rb Needle 20Mm Length N76 Cm, 3 / 0 Item865 1 3 / 0 869 1.868 R-21- B.B Silk ( 3 / 8Cir Rcut Needle 26Mm Nlength 76 Cm ) , 3 / 0 Item866 1 3 / 1 870 1.869 R-22- B.B Silk ( 3 / 8Cir Rcut Needle 45Mm Nlength 76 Cm ) , 2. / 0 Item867 1 3 / 2 871 1.87 R-78- B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm- Nlength 76 Cm, 4 / 0 Item868 1 3 / 3 872 1.871 R-79- B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm- Nlength 76 Cm, 5 / 0 Item869 1 3 / 4 873 1.872 2.2 Polymide Monofilament Black ( Nylon ) 874 1.873 R-23- Polyamide ( 3 / 8 Cir Micropoint Nspatulated- 6Mm- Length 38 Cm ) , 8 / 0 Item871 1 8 / 0 875 1.874 R-24- Polyamide ( 3 / 8 Conventional Cutting Nneedle 16Mm- Length 70 Cm ) , 3 / 0 Item872 1 8 / 1 876 1.875 R-25- Polyamide ( 3 / 8 Conventional Cutting Nneedle 19Mm- Length 60 Cm. ) , 4 / 0 Item873 1 8 / 2 877 1.876 R-26- Polyamide ( 3 / 8 Cir Slim Blade Cutting Nneedle 15Mm- Length 70 Cm ) , 5 / 0 Item874 1 8 / 3 878 1.877 R-27- Polyamide ( 3 / 8 R Cutting Needle 45Mm- Nlength 70 Cm. ) , 2 / 0 Item875 1 8 / 4 879 1.878 R-28- Polyamide ( 3 / 8 R Cutting Needle 45Mm- Nlength 70 Cm. ) , 1 / 0 Item876 1 8 / 5 880 1.879 R-75- Polyamide ( 3 / 8 Cutting Edge Needle- Double Arms Needle 6 Mm- Suture Length N35-42 Cm, 10 / 0 Item877 1 8 / 6 881 1.88 2.3 Monofilament Polypropylene Blue 882 1.881 R-29- Polypropylene ( 1 / 2 Rb / Tp13 Mmdouble Nneedle- Length 75Cm ) , 5 / 0 Item879 1 5 / 0 883 1.882 R-30- Polypropylene ( 3 / 8 Cir Rb / Taper Point Double Needle 9.3Mm- Suture Length 60 Ncm ) , 6 / 0 Item880 1 5 / 1 884 1.883 R-31- Polypropylene ( 3 / 8Cir Rb / Tp Double 8Mm Nneedle- Length 60 Cm ) , 7 / 0 Item881 1 5 / 2 885 1.884 R-32- Polypropylene ( 3 / 8Cir Rb 16 Mm Needle- Nlength 70 Cm ) , 5 / 0 Item882 1 5 / 3 886 1.885 R-33- Polypropylene ( 1 / 2 Cir Rb Needle 30Mm- Nlength 90 Cm ) , 1 / 0 Item883 1 5 / 4 887 1.886 R-34- Polypropylene ( 1 / 2 Cir Rb Needle 45Mm- Nlength 90 Cm ) , 1 Item884 1 5 / 5 888 1.887 R-35- Polypropylene ( 1 / 2 Cir Rb Double Needle N17mm- Length 90 Cm ) , 5 / 0 Item885 1 5 / 6 889 1.888 R-36- Polypropylene ( 1 / 2 Cir Tapercut Double Nneedle 17Mm- Length 70 Cm ) , 4 / 0 Item886 1 5 / 7 890 1.889 R-37- Polypropylene ( 1 / 2 Cir Rb Double Needle N25mm- Length 70 Cm ) , 3 / 0 Item887 1 5 / 8 891 1.89 R-38- Polypropylene ( 1 / 2 Cir Rb Needle 30Mm- Nlength 90 Cm ) , 2 / 0 Item888 1 5 / 9 892 1.891 R-39- Polypropylene ( 1 / 2 Cir Tapercut Double Nneedle 17Mm- Length 90 Cm ) , 3 / 0 Item889 1 5 / 10 893 1.892 R-40- Polypropylene ( 1 / 2 Cir Tapercut- Needle 26 Nmm- Length 90 Cm ) , 2 / 0 Item890 1 5 / 11 894 1.893 R-41- Polypropylene ( 3 / 8 Cir Conventional Cutting Pc-3 Needle 15Mm- Length 60Cm ) , 6 / 0 Item891 1 5 / 12 895 1.894 R-42- Polypropylene ( 3 / 8Cir Rb 13Mm Double Nneedle- Length 60 Cm, 6 / 0 Item892 1 5 / 13 896 1.895 R-43- Polypropylene ( 1 / 2 Cir Rb Needle 16 Mm- Nlength 70 Cm ) , 4 / 0 Item893 1 5 / 14 897 1.896 R-44- Polypropylene ( 3 / 8 Cir Cutting Needle N25mm- Length 45 Cm ) , 3 / 0 Item894 1 5 / 15 898 1.897 R-45- Poly Propylene ( 1 / 2 Cir Rb Heavy 30Mm- Nlength 100 Cm ) , 1 Item895 1 5 / 16 899 1.898 R-46- Polypropylene ( L / 2 Cir Reverse Cutting- 45 Nmm Needle- Suture Length 100 Cm ) , 1 Item896 1 5 / 17 900 1.899 R-47- Polypropylene ( 3 / 8 Cir Rb- 8Mm Double Nneedle- Suture Length Of 60 Cm ) , 8 / 0 Item897 1 5 / 18 901 1.9 R-48- Polypropylene ( 1 / 2 Circle Tapercut 13Mm Ndouble Needle- Length 60Cm ) , 4 / 0 Item898 1 5 / 19 902 1.901 R-49- Polypropylene ( 1 / 2 Circle Cc 13Mm Double Needle- ( Identical Gauge Needle And Nsuture ) - Suture Length Of 60Cm, 5 / 0 Item899 1 5 / 20 903 1.902 R-50- Polypropylene ( 1 / 2 Circle Tapercut Double Needle 17Mm Suture Length Of 90Cm ) , 2 / 0 Item900 1 5 / 21 904 1.903 R-51- Polypropylene ( 1 / 2 Cir Tapercut Double Nneedle 25Mm- Suture Length Of 90Cm ) , 3 / 0 Item901 1 5 / 22 905 1.904 2.4 Braided Coated Polyster, Green / White Or 906 1.905 R-52- Polybutylate / Silicon Coated Polyster Braided Green / Blue ( 1 / 2 Cir Tapercut- 17 Nmm Double Needle- Suture Length 75 Cm ) , 4 / 0 Item903 1 4 / 0 907 1.906 R-53- Polybutylate Coated Polyster Braided White ( 1 / 2 Cir Tapercut- 17 Mm Double Needle- Nsuture Length 90 Cm ) , 2 / 0 Item904 1 4 / 1 908 1.907 R-54- Polybutylate / Silicon Coated Polyster Braided Green / Blue ( 1 / 2 Cir Tapercut- 17 Nmm Double Needle- Suture Length 90 Cm ) , 2 / 0 Item905 1 4 / 2 909 1.908 R-55- Polybutylate Coated With Polyster Braided ( Green / Blue ) Size 2 / 0 With 1 / 2 Circle Tapereut V-5- 17Mm Double Armed Needle- Suture Length Of 90Cm With Pledgets Size 6 Nx 3 X L.5Mm, 2 / 0 Item906 1 4 / 3 910 1.909 R-56- Polybutylate / Silicon Coated With Polyster Braided ( Green ) Size 2-0 With 1 / 2 Circle Tapercut- 25Mm Double Armed Needle- Suture Length Of 90Cm With Pledgets Size 6 Nx 3 X L.5Mm, 2 / 0 Item907 1 4 / 4 911 1.91 R-57- Coated Polyster Braided ( Green / Blue ) Size 3 / 0 With 1 / 2 Circle Round Body Double Needle 25Mm- Suture Length 75Cm, 3 / 0 Item908 1 4 / 5 912 1.911 3. Polyglecraprone 25, / Polyglyconate 913 1.912 R-61- Polyglecaprone / Polyglyconate ( 1 / 2 Circle Noval Rb Needle 26Mm- Suture Length Of 70Cm ) , 2 / 0 Item910 1 2 / 0 914 1.913 R-62- Polyglecaprone / Polyglyconate ( L / 2 Circle Oval Rb 26Mm Contrast Needle- Suture Nlength 70Cm ) , 3 / 0 Item911 1 2 / 1 915 1.914 R-63- Polyglecaprone / Polyglyconate ( L / 2 Circle Cutting 16Mm Needle- Suture Length 70Cm ) , 4 / 0 Item912 1 2 / 2 916 1.915 R-64- Polyglecaprone / Polyglyconate ( 3 / 8 Circle Cutting 25Mm Needle- Suture Length Of N70cm ) , 3 / 0 Item913 1 2 / 3 917 1.916 4. Monofilament Polydioxanone / Polyglyconate 918 1.917 R-65- Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone / Polyglyconate Violet ( 1 / 2 Circle Reverse Cutting 50 Mm Needle- Nsuture Length Of 90Cm ) , 1 Item915 1 2 / 3 919 1.918 R-66- Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone / Polyglyconate Violet ( 1 / 2 Circle Rb 31Mm Needle- Length Of 70Cm ) , 2 / 0 Item916 1 2 / 4 920 1.919 R-67- Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone / Polyglyconate Violet ( 1 / 2 Circle Rb 30Mm Needle- Length Of 70Cm ) , 1 / 0 Item917 1 2 / 5 921 1.92 5. Antibacterial Coated Suture 922 1.921 R-68- Absorbable Surgical Suture U.S.P. ( Synthetic ) Antibacterial With Antibacterial Coated Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) 1 / 2 Circle Ct Round Bodied 40Mm- Ngs Needle- Suture Length 90 Cm, 1 Item918 1 2 / 5 923 1.922 R-69- Absorbable Surgical Suture U.S.P. ( Synthetic ) Antibacterial With Antibacterial Coated Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) 1 / 2 Circle Ct Round Bodied 40Mm- Ngs Needle- Suture Length 90 Cm, 1 / 0 Item919 1 2 / 5 924 1.923 R-70- Absorbable Surgical Suture U.S.P. ( Synthetic ) Antibacterial With Antibacterial Coated Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) 1 / 2 Circle Round Bodied 30Mm- Suture Nlength 90 Cm, 2 / 0 Item920 1 2 / 5 925 1.924 R-71- Absorbable Surgical Suture U.S.P. ( Synthetic ) Antibacterial With Antibacterial Coated Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) 1 / 2 Circle Reverse Cutting- Os 40Mm- Nsuture Length 90 Cm, 1 Item921 1 2 / 5 926 1.925 R-72- Absorbable Surgical Suture U.S.P. ( Synthetic ) Antibacterial With Antibacterial Coated Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) 1 / 2 Circle Reverse Cutting 36Mm- Os Nneedle- Suture Length 90 Cm, 1 / 0 Item922 1 2 / 5 927 1.926 R-73- Absorbable Surgical Suture U.S.P. ( Synthetic ) Antibacterial With Antibacterial Coated Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3-0 With 1 / 2 Circle Round Bodied N20mm- Suture Length 70 Cm, 3 / 0 Item923 1 2 / 5 928 1.927 R-74- Absorbable Surgical Suture U.S.P. ( Synthetic ) Antibacterial With Antibacterial Coated Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) 3 / 8 Circle R Cutting- Ps-1- 24Mm- Nsuture Length 70 Cm, 3 / 0 Item924 1 2 / 5 929 1.928 N / A- Inj. Mephentermine, 10 Ml. Vial Item925 1 2 / 5 930 1.929 N / A- Inj. Hepatitis-B Immunoglobin Vaccine, Vial Item926 1 2 / 5 931 1.93 N / A- Eye Drop Tropicamide & Phenylphrine, 5 Ml Solution Item927 1 2 / 5 932 1.931 N / A- B.K. Skin Traction Kit , Item928 1 2 / 5 933 1.932 N / A- Hand Sanitizer 180 Ml, Bottle 180 Ml Item929 1 2 / 5 934 1.933 N / A- P.P.E. Kit, Item930 1 2 / 5 935 1.934 N / A- Mask N-95, Item931 1 2 / 5 936 1.935 N / A- Sodium Hypcloride Solution, Solution 1 Ltr. Item932 1 2 / 5 937 1.936 N / A- Inj.Virapamile, Item933 1 2 / 5
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
23.
Defence #8425808 AOC
Cleaning Of Overhead Water Tank And Under Ground Sump And Misc Maint Of Installations Under Age E/M Of Ge (West) Agra; 1.00 M&L for cleaning of RCC over head tank of the capacities of tank 50000 gallons staging 15M to 21 M height by brooming the side wall /bottom and ceiling dome of tank, removing all fungus ,scales ,dust, sludge etc from inside of the tank and removing the materials to a distance exc 50 M n.exc 100 M washing tank from inside with water and dis-infection chemical such as bleaching powder etc. as directed, applying one coat of white wash on all internal surfaces of the tank, writing date of cleaning, CA No, Name of contractor etc with using synthetic enamel black/white paint, applying one coat of synthetic enamel black paint on all inlet, outlet, washout and overflow pipes complete all as specified & directed. by Engr-in-Charge 2.00 All as per item No. 1 above but capacity of tank 100000 gallons. 3.00 M&L for cleaning of under ground sump capacity of sump 10000 gallons by removing all fungus, scales, dust, sludge etc from inside the sump and removing the materials to a distance exc 50 M and n. exc 100 M including washing the walls, bottom of the sump with water and dis-infection chemical such as bleaching powder etc, writing date , CA No, Name of contractor with using synthetic enamel black/white paint complete all as specified & directed. by Engr-in-Charge 4.00 All as per item No.3 above but capacity of sump 20000/25000 gallons. 5.00 All as per item No. 3 above but capacity of sump 50000 to 70000 gallons. 6.00 All as per item No. 3 above but capacity of sump 100000 gallons. 7.00 All as per item No. 3 above but capacity of sump 200000 gallons. 8.00 All as per item No. 3 above but capacity of sump 350000 gallons. 9.00 All as per item No. 3 above but capacity of sump 400000 gallons. 10.00 All as per item No. 3 above but capacity of sump 800000 gallons.Note for item No 01 to 10 : (a) Removal of remaining sludge from the flor with the help of industrial vacuum cleaner : (b) Removal of remaining sludge with the help of imported heavy duty industrial vacuum, cleaner and sludge sucker having max power of 1200 watt with suitable heavy duty rugged motor.(c) Imported sludge sucker should be a part of the high pressure system which sucks and throws the same out of the tank this must handle solid partials as well.(d) All safety gadgets like safety bells, special safety belts, special safety ladders helmets, heavy duty gum boots, electric safety gloves and special working gloves saftety masks, aprons etc. for complete security and operation be used by well trained person. 11.00 S&F in repairs aviation obstruction light luminaries fittings having integral LED aviation light comprising of aluminium housing with polycorbonate enclosure at the top of OHT and making necessary electric connection and fixing arrangement of aviation lights complete all as specified and directed by Engr-in-Charge 12.00 S&F in repairs electronic water level indicator,5 stage, showing 0%, 25%, 50%, 75% & 100% (Sensor system with LED display) complete all as specified and directed by Engr-in-Charge 13.00 S&F in repair on wall/surface or on top of over head tank or laying in trenches PVC insulated 1.5 Sqmm, 3 core copper conductor 1100 Volts grade cable drawn through PVC conduit pipe of 20mm dia complete all as specified and directed by Engr-in-Charge 14.00 All as per item No. 13 above but 1.5 Sqmm, 06 Core. 15.00 S&F in repair pressure gauge, 100mm dia of scale 0 to 7 Kg/cm2 with GI clamp of size 25 x 3 mm and 15mm socket complete all as specified and directed by Engr-in-Charge 16.00 M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm size, buried directly in ground (earth pit not less than 3.25M deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to and including galvanized steel earth strip 32 x 6mm, including 40mm bore GI light grade protection pipe as earth lead strip connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150mm thick alternate layers of charcoal or cock dust & common salt 20mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) cover 50mm thick of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with 8mm deformed or twisted bars @ 100mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/loose soil and deposited the surplus soil to a distance n.exc 50mtr away from starting point complete all as specified and shown in electrical plate No 3 of MES standard schedule of rates 2009 Part-I complete all as specified and directed by Engr-in-Charge 17.00 Supply and fix in repairs air terminal single pointed aluminium rod 12mm dia and 300mm long including taking down of old existing terminal complete all as specified and directed by Engr-in-Charge 18.00 S&F in repairs test point terminal block made of gun metal or phosphoras bronze size 75x75x25mm drilled and screwed including 3 Nos 8 mm dia 25mm long, head screw complete including taking down of old existing test point complete all as specified and directed by Engr-in-Charge 19.00 Supply and fix in repairs aluminium strip 25x3 mm with saddles and fixing screw etc for roof and down conductors and above ground complete including taking down of old existing complete all as specified and directed by Engr-in-Charge 20.00 Supply and fix in repairs GI strip 32x6mm buried in ground including taking out/down old existing strip complete all as specified and directed by Engr-in-Charge 21.00 M&L for Mild steel, plain, black sheet 1.25mm thick in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required. 22.00 Supply, fabrication and fixing of MS channel/AngleC section etc conforming to GDE FE 410- W as hip and jack rafter, purlins,ladder ect where connected to common rafters and running rails fixed with other connecting plates ect including necessary welding, cutting etc and two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge 23.00 Sampling and testing of water for the conformation of Desirable / permissible limit of following requirements for DRINKING WATER as per IS : 10500-1991 from govt approved laboratory including transportaion of warer complete all as specified and directed(a) Bacterioligical requirements: Testing of coliform Organisms/100ml.(b) Chemical requirements : Testing of colour hazen unit max odour taste turbidity NTU max, pH value, total hardness (as CaCo3) mg/lmax, iron (as FE) mg/l max.(c) Desorable Charactreristics : Testing of dissolved solids mg/l max, Calcium (as CA mg/l mnax, magnesium (as Mg) mg/l max, Copper (as Cu)mg/l max, Manganese (as Mn) mg/l max, Shulphate (as SO4) mg/l, max, nitrate (as NO3) Mg/l phenolic compound mg/l max, mercury (as Mg) mg/l max, Cadmium (as Cd) Mg/l max, Selenium (as Se) mg/l max, Arsenic (as As) mg/l max, Cyanide (as CN) mg/l max, Lead (as Pb) mg/l max, Zinc (as An) mg/l max, Chromium (as Cr+( mg/l max, Mineral Oil, mg/l max Note :- Testing of raw water is mandetory at every quarter failing which a recovary of Rs 1000.00 per test shall be recovered from the contractor. 24.00 M&L in repairs rotational modulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 Ltr size all as specidied and directed by Engr-in-Charge. 25.00 S&F in repairs circular cover for water storage tank, any capacity made out of 1 mm thick GI sheet PVC water storage tank fix with suitable screws (indoor to protact monkey menance) design and size as per sample kept in GE office or as approved by Engr-in-Charge complete all as specified and directed by Engr-in-Charge 26.00 Reapair to header 300 mm using mild steel, plain black sheet, 4 mm thick in wall cladding, cut to size, fixed to headers at various locations of water supply installations with 40 mm lap join by welding seams, including bending or turning up, mitred angles and fixing of sluice valve etc as required complete all as specified and directed by Engr-in charge at site. 27.00 Reapair to header 250 mm using mild steel, plain black sheet, 4 mm thick in wall cladding, cut to size, fixed to headers at various locations of water supply installations with 40 mm lap join by welding seams, including bending or turning up, mitred angles and fixing of sluice valve etc as required complete all as specified and directed by Engr-in charge at site. 28.00 S&F in repair MS Pipe ERW Steel including specials( bends,collars,tapers, reducers), nominal 300 mm dia as per IS 3589 (1981) thickness 5.4 mm. Note:- rates are inclusive of all cutting, welding & fittings. 29.00 All as per item No. 28 above but 250 mm dia 30.00 All as per item No. 28 above but 150 mm dia 31.00 Material and labour for clearing of surrounding area of pump house by surface excavation upto 10 cm average depth including removing shrubs, grass, implant, small bushes, branches of tree and other unwanted materials/stones etc and spray of herbicide chemical on grass at all around area of pump house including levelling complete all as specified and directed. Note : (i) The cost of hebricide chemical for grass & petrol and machinery for cutting of grass included in quoted rate complete all as specified and directed by Engr-in-Charge. 32.00 S&F in repair sluice valve, Class PN-1.6, 200 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers complete all as specified and directed by Engr-in-Charge 33.00 All as per item No-32 above but 150 mm dia. 34.00 All as per item No-32 above but 100 mm dia. 35.00 All as per item No-32 above but 80 mm dia. 36.00 S&F MCCB 4 Pole, 415 V, fixed type type, 25 to 100 Amps with breaking capacity 16 KA 37.00 S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA 38.00 S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA 39.00 S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA 40.00 S&F MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA 41.00 S&F MCCB 4 Pole, 415 V, Adjustable type, 630 Amps with breaking capacity 50 KA 42.00 Taking up or down for 100mm bore old steel tubing and connections complete all as specified and directed by Engr-in-Charge 43.00 All as per item No 42 here in before but 80 mm bore 44.00 All as per item No 42 here in before but 50 mm bore 45.00 Supply, laying and jointing for the 100mm bore in trenches/on floor/wall, galvanized steel tubing medium grade including ISI marked GI fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of Tee or MS clamp with rubber bush complete all as specified and directed by Engr-in-Charge 46.00 All as per item No 45 here in before but 80 mm bore 47.00 All as per item No 45 here in before but 50 mm bore 48.00 Excavation in trenches in soft/loose soil, n. exc. 1.5 M wide and n.exc 1.5 M in depth, to required level and gradient for laying of pipe etc and getting out complete all as specified and directed by Engr-in-Charge 49.00 Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified and directed by Engr-in-Charge 50.00 Removing excavated materials (soft/loose soil) to a distance n.exc. 50 M and depositing where directed at a level n.exc. 1.5 M above the starting point complete all as specified and directed by Engr-in-Charge 51.00 Supply & fix surface/wall mounting LED batten 1x20 watt, 220 V AC luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. 52.00 Supply and fixing 100 watt ,230 V AC outdoor type ,5700K LED security Flood light made out of pressure die cast aluminium housing with toughned glass , IP66 protection and impact resistance IK07 ,mounted on top of the pole with cap type bracket having lenght not less than 0.31 meter fixed with suitable fasteners having extended arm length not less than 1.5 meter and dia not more than 43 mm and angle between pole and extended arm should be 100 to 105 degrees including fabrication work for fixing Building security light including PVC insulated three core 23/0.0076 copper cable and includinding suitable size of pvc flexible conduit from celling rose to building security light fittings complete all as specified and directed by Engr-in-Charge 53.00 M&L for calcium hypochlorite having 65%-70% available chlorine packed in 45 Kgs plastic durms for water treatment chemical of make approved by the E-in-Cs Br. Note :- Test report is reqd with item 54.00 Supply, laying testing, connecting XLPE armoured, LT 1100V grade (heavy duty) copper conductor cable,of following sizes confirming to IS7098(Part-I) 1988, laid in existing RCC covered duct/Sub way/along wall/MS bracket. Note : The Cables shall be fixed to LT panel with suitable size brass/stain less steel cable glants, copper lugs and rate deemed to be included in rate quoted for respective cable 54.01 a) 3 Core 95 Sqmm 54.02 b) 3 Core 70 Sqmm 54.03 c) 3 Core 50 Sqmm
Contract Date: Oct 16, 2025 Contract Value : ₹ 43.12 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 12
Uttar Pradesh View Result →
24.
Defence #8149783 AOC
Tender For Repair/ Maintenance Of Geysers, Solar Water Heater, Summer Appliances, Dg Set, Amf Panel, Electrical Infrastructure, Periodical Servicing/ Inspection Of Various Earthing System & Certain Misc E/M Works At Aftc, 2 Dc Area, Cqae (We) & Afs East West Jalahalli; 1 Inspection, checking adjustments and minor repairs of storage water heater 25/50 ltr capacity of any type any make vertical/ horizontal type which includes the following :-(a) Inspection, taking out of drain plug & dewatering and re-fixing the same complete all as directed .(b) Checking water tightness of storage tank . (c) Checking stop cocks with outlet/inlet pipe of geysers, pressure reducing valves etc to ensure free movement of water and easy functioning of parts.(d) Inspecting over flow vent pipe connections to ensure water-tightness and proper flow.(e) Checking and correct earth continuity of electrical items.(f)Checking functioning of heating elementand correct setting adjustment of thermostat.(g) Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness.(h) Replacement of defective spares shall be measured and paid under relevant items mentioned below separately as supply and fix. 2 Note : The following deemed to be inclusive in quoted rate :- 3 The above job shall be carried out by a trained electrician having ITI in electrical, documentary proof of the education of tradesman shall be produced to the Engr-in-Charge before commencement of work. 4 In case of major defects, entire job shall be completed within 15 days from the date of registration of complaint, failing which penalty charges @100/- per day shall be recovered. 5 In case of minor defects, entire job shall be completed with in 12 hrs from the time of registration of complaint, failing which penalty charges @ 50/- per job shall be recovered. 6 The entire job will be carried out in entire area of Air Force stn Jalahalli 7 All types of T&P, PVC insulation tape, minor nuts, bolts, washers etc required for maintaining the services shall be provided by contractor without any extra cost to the department. 8 Supply and fixingHeating element1.5 KW 230 volts (ISI marked) suitable for 25/50 ltrs geysers any type and any make including taking down old one including washer/ packing suitable complete all as specified and as directed. 9 Supply and fixingPVC connection for hot/ cold water made of double layer nylon braided and fabric at a pressure of 6kg/sq cm at both ends, 450 mm long, heavy duty with CP brass adopters, washers, suitable for 15 mm bore pipe including taking down existing one complete all as specified and as directed. 10 Supply and fixingin replacement pressure relieving valve CP brass confirming to relevant IS with washer suitable for 15mm bore GI pipe suitable for 25/50 ltrs geysers complete all as specified and as directed. 11 Material and labour forCutting and screwing existing steel water tubing 15/20/25 mm bore for addition /alteration required for connections to geysers etc including taking down existing one complete all as specified and directed. 12 Supply and fixingin replacement thermostat switch range of 30-80 degree celsiussuitablefor geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed. 13 Supply and fixingin replacement brass non return valves, screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for union, ISI marked, complete all as specified and as directed. 14 Supply and fixingOuter body of MS sheet not less than 20 gauge suitable for 25 ltr geyser with white synthetic enamelled paint including taking down existing one complete all as specified and as directed. 15 Material and labour for Grouting 4 Nos of M12 X100mm bolt in stone /brick masonry wall with 1:4 CM suitable for hanging geysers complete all as specified and as directed. 16 Supply and fixing Indicator lamp for geyser 25/50 ltr capacity ofcolour green & red complete all as specified and as directed. 17 Supply and fixingHeating element2.0 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any capacity ,any type and any make including taking down old one including washer/ packing suitable complete all as specified and as directed. 18 Supply and fixingin replacement bottom cover of MS sheet 20 gauge suitable for 25 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified and as directed. 19 Material and labourfor painting of outer surface of 50 ltrs storage type water geysers after cleaning of dust & other organic/inorganic materials if any and applying one coat of synthetic enamel white paint by spray painting and writing MES No. on the geyser complete all as specified and as directed. 20 Taking down carefully storage water heater (geyser) 25 ltr capacity of any type, any make from the location by removing the electric & water supply connection and shifted to work shop/MES store yard for repair and re-installation at any location including Supply and fixingin repair of heavy duty pin type fastener 4 long and making necessary inlet/outlet electric & water supply connection from existing source to geyser complete all as specified and as directed.Note :- Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness. 21 Supply and installwater heater storage type (Geyser) vertical of capacity 25 Ltr, suitable for high pressure up to 8 barpowder coated metal body, temperature indicating dial , glass line coated tank, magnesium anode,efficient long life copper heating element, wattage 2 KW electrically operated, AC 230 Volt, BEE5 Star Rated with complete fittings/partsand accessories for fixing on wall/surfaceall as per site requirement andspecified anddirected Make:- Bajaj / Racold / Havells 22 Material and labourfor painting of outer surface of 25 ltrs storage type water geysers after cleaning of dust & other organic/inorganic materials if any and applying one coat of synthetic enamel white paint by spray painting and writing MES No on the geyser complete all as specified and as directed. 23 Taking down carefully storage water heater (geyser) 50 ltr capacity of any type, any make from the location by removing the electric & water supply connection and shifted to work shop/MES store yard for repair and re-installation at any location including Supply and fixingin repair of heavy duty pin type fastener 4 long and making necessary inlet/outlet electric & water supply connection from existing source to geyser complete all as specified and as directed.Note :- Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness. 24 Dismantling carefully solar storage water heating system of 100/200/300 Ltr capacity any type for following works withtestingand refixing the same in original position making all water/ electric connection to entire satisfaction of Engineer-in-charge after repair as under :-(a) Inspection, opening, of all parts,descaling, washing of inner tankwith chemical solution and cleaning ofouter cover storage tank.(b) Checking water tightness of storage tank after cleaning.(c) Checking and correcting earth continuity of electrical items.(d) Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness. (e) Replacement of damaged solar cells(f)Necessary T&P such as ladder, helper shall be contractor responsibility. 25 Note : The following deemed to be inclusive in quoted rate :- 26 The above job shall be carried out by a trained electrician having ITI in electrical, documentary proof of the education of tradesman shall be produced to the Engr-in-Charge, before commencement of work. 27 In case of major defects, entire job shall be completed within 15 days from the date of registration of complaint, failing which penalty charges @ Rs. 500/- per day shall be recovered. 28 In case of minor defects, entire job shall be completed with 12 hrs from the time of registration of complaint, failing which penalty charges @ Rs. 100/- per job shall be recovered. 29 The entire job will be carried out in entire area of Air Force stn Jalahalli 30 Necessary T&P such as ladder, helper shall be contractor responsibility. 31 All types of T&P, PVC insulation tape, minor nuts, bolts, washers etc required for maintaining the services shall be provided by contractor without any cost to the department. 32 Supply and replacement of solar tube as per existing type complete all as specified and directed. 33 Supply and fixingin replacement thermostat switch suitable for solar water heater of any make and size complete all as specified and as directed. 34 Supply only solar cells to replace the damaged cells in thesolar panel for solar water heater 200 Ltr capacitycomplete all as specified and directed. 35 Gasket setfor solar water heater panel suitable for 100Ltr capacity complete all as specified and directed. 36 Supply and fixingin replacement bib taps, cast copper alloy, with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for 15mm bore iron pipe, ISI marked, complete all as specified and as directed. 37 Supply and Fix in replacement of solar water heater tank 100 ltr capacity tank should be 1.60 mm thickness low carbon steel with porcelain coating, outer tank should be 0.4 mm thickness stainless steel 202 grade Non Magnetic grade, insulation in PUF 50mm including provn for suitable solar tubes complete all as specified and directed.Note :- Solar tubes shall be measured and paid separately 38 Supply and replace solar panel glass suitable for 100 ltrs capacity solar water heater with gasket complete all as specified and directed. 39 Supply and fixing Stop valves, 15 mm bore of pipe fancy type, chromium plated , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 40 Supply only solar cells to replace the damaged cells in thesolar panel for solar water heater 100 Ltr capacity complete all as specified and directed. 41 Supply and fix in replacementrotational moulded polyethylene water storage tank of 300 litres capacity three layered HDPE water storage tanks cylindrical vertical with closed top as per IS 12701-1996 hoisted and fixed in position, including provn of inlet pipe, over flow pipe, washout pipe etc complete all as specified and directed. 42 Material and labourforStaging / steel frame work for Solar water tanks using standard mild steel sections like angle iron / MS pipe / flat iron / sheets etc using steel of Fe 410-W (Gde E-250) quality - A including necessary welding suitable to keep 300 ltrs PVC water tank in repairs complete all as specified and directed. 43 M&L for Preparing new steel surfaces of any description over 10cm in width or girth , not otherwise described and applying two coats of Synthetic enamel Paint over a coat of red oxideprimer complete all as specified and directed. 44 Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing and connection complete all as specified and directed.. 45 Supply and fixingin repair 20 mm dia Chlorinated PVC (CPVC) Pipes of pressure rating 10kgf/cm2including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed. 46 Supply and fixingin repair Chlorinated PVC (CPVC) Gate Valve of size 20 mm dia, (ISI marked) complete all as specified and as directed. 47 Supply and fixingin repair 25 mm dia Chlorinated PVC (CPVC) Pipes of pressure rating 10kgf/cm2including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed. 48 Supply and fixingin repair Chlorinated PVC (CPVC) Gate Valve of size 25 mm dia,( ISI marked) complete all as specified and as directed. 49 Supply and fixingin repair 32 mm dia Chlorinated PVC (CPVC) Pipes of pressure rating 10kgf/cm2including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed. 50 Supply and fixingin repair Chlorinated PVC (CPVC) Gate Valve of size 32 mm dia,( ISI marked) complete all as specified and as directed. 51 Supply and fixingin repair 40 mm dia Chlorinated PVC (CPVC) Pipes of pressure rating 10kgf/cm2including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed. 52 Supply and fixingin repair Chlorinated PVC (CPVC) Gate Valve of size 40 mm dia,( ISI marked) complete all as specified and as directed. 53 S&F in repair PVC insulated and FRLS PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, 2.5 Sqmm 3 core,complete all as spcified and directed. Make : Havells/ Polycab/ Plaza 54 Taking down ofexhaust fan any size/capacity after disconnecting cable connection, and refixing same in original position after necessary repair/over hauling including replacement of parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional andmaking connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.5 Sqmm from ceiling rose/ connector fan (minimum 0.50 Mtr length) aredeemed to be inclusive in quoted rate all as specified and as directed. Note:- (a)Rewinding, and materials to be replaced are measured separately.) 55 (b)The above job shall be carried out by a trained electrician having qualified in ITI ( electrician Trade), documentary proof of the education of tradesman shall be produced to Engr-in-Charge before commencement of work. 56 (c)Defective unserviceable part like fan bush,bearing etc. will be paid under respective item here-in-after as supply only through proper documentation. 57 (d)The entire job will be carried out inAir Force stn Jalahalli 58 (e) Necessary T&P such as ladder, helper shall be contractor responsibility. 59 (f)All types of T&P, PVC insulation tape, minor nuts, bolts, washers etc required for maintaining the services shall be provided by contractor without any extra cost to the department. 60 (g)Any fan found defective/not working shall be brought to AGE E/M store yard & re-fixed after repairing. 61 (j)In case of major defects, entire job shall be completed within 10 days from the date of registration of complaint, failing which penalty charges @100/- per day shall be recovered. 62 (k) In case of minor defects, entire job shall be completed with 12 hrs from the time of registration of complaint, failing which penalty charges @ 50/- per job shall be recovered. 63 Supply only 3.15 mfd capacity exhaust fan condenser complete all as specified and directed. 64 Supply only fan bush of suitable size for exhaust fan of the any sweep complete all as specified and directed. 65 Supply only fan bearing of suitable size for exhaust fan of 250mmsweepincluding greasing complete all as specified and directed. 66 Supply only metal louvers of suitable size for exhaust fan of the 250mmsweep complete all as specified and directed. 67 Supply only 2.5 mfd capacity ceiling /exhaust fan condensers complete all as specified and directed. 68 Supply only fan bearing of suitable size for exhaust fan of 300mmsweepincluding greasing complete all as specified and directed. 69 Supply only metal louvers of suitable size for exhaust fan of the 300 mmsweep complete all as specified and directed. 70 Supply only 4 mfd capacity ceiling /exhaust fan condensers complete all as specified and directed complete all as specified and directed. 71 Supply only fan bearing of suitable size for exhaust fan of 450mmsweepincluding greasing complete all as specified and directed. 72 Supply only metal louvers of suitable size for exhaust fan of the 450 mmsweep complete all as specified and directed. 73 M&L for cutting of hole through stone wall with the help of Core cutting machineincluding providing, fixing and removing shoring,cleaning,internal plastering and removing surplus hard core,rubbish not exceeding 50 mtrs including fixing of exhaust fan of size 250-450 mm all as specified and as directed. 74 Supply and fixingExhaust fan250 mm sweep 230/ 240 volt AC single phase PVC body1400 RPM including necessary nut, bolts / screws including taking down existing one writing MES No with synthetic enamel paint all specified and directed. Make-Havells /bajaj/ Crompton Greaves.Note:-Old Unserviceable Exhaust fan shall be deposited to MES store yard. 75 Material and labour for winding of Exhaust fan 250mm sweep of any make with super enamelled copper winding wire of existing gauge (wt of copper winding wire per fan 250 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size not less than0.75 mm of length not more than one meter with each fan complete all as specified and directed. Note :- (i)Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. 76 M&L in repairfor stainless steel wire cloth 0.63 mm dia of wire and average width of aperture 1:40 mm for covering of exhaust fan hole in wall of size 450 mm X450 mm with PVC/woodenbeading fixed on wall including necessary fixing arrangement up to hight 11 mtrcomplete all as specified and directed.Note : All safety measures is the responsible of the contractor 77 Supply and fixingExhaust fan 300 mm sweep 230/ 240 volt AC single phase PVC body 1400 RPM including necessary nut, bolts / screws including taking down existing one writing MES No with synthetic enamel paint all specified and directed. Make-Havells /bajaj/ Crompton Greaves.Note:-Old Unserviceable Exhaust fan shall be deposited to MES store yard. 78 Material and labour for winding of Exhaust fan 300mm sweep of any make with super enamelled copper winding wire of existing gauge (wt of copper winding wire per fan 250 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size not less than0.75 mm of length not more than one meter with each fan complete all as specified and directed. Note :- (i)Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. 79 M&L for cutting of hole through brick wall with the help of Core cutting machineincluding providing, fixing and removing shoring,cleaning,internal plastering and removing surplus hard core,rubbish not exceeding 50 mtrs including fixing of exhaust fan of size 250-450 mm all as specified and as directed. 80 Supply and fixingExhaust Fan 300 mm sweep, 230/240 volt AC single phase, heavy duty,1400 RPM, corrosion less mild steel body of motor, suitable hold fast with necessary nut, bolts / screws with louver including taking down existing one,writing MES No. with synthetic enamel paint all specified and directed. Make- Havells /Bajaj/ Almonard.Note:-Old Unserviceable domestic exhaust fan shall be deposited to MES store yard. 81 M&L for repair louver made of galvanised steel suitable for 300 mm size exhaust fan, fixed on wall including necessary fixing arrengement up to height 11 mtrcomplete all as specified and directed.Note : All safety measures shall be the responsible of the contractor. 82 Supply and fixingExhaust Fan 450 mm sweep, 230/240 volt AC single phase, heavy duty,1400 RPM, corrosion less mild steel body of motor, suitable hold fast with necessary nut, bolts / screws with louver including taking down existing one,writing MES No. with synthetic enamel paint all specified and directed. Make- Havells /Bajaj/ Almonard.Note:-Old Unserviceable domestic exhaust fan shall be deposited to MES store yard. 83 Material and labour for winding of Exhaust fan 450mm sweep of any make with super enamelled copper winding wire of existing gauge (wt of copper winding wire per fan 250 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size 0.0076mm of length not more than one meter with each fan complete all as specified and directed. Note :- (i)Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. 84 Taking down ofwall mounted/Pedastal fanof size 400/450mm after disconnecting cable connection, and refixing same in original position after necessary repair/over hauling .(Note:- Repair, rewinding, over hauling and materials to be replaced are measured separately.) 85 Supply only fan bush of suitable size for wall mounted/Pedastalfan of the any sweep complete all as specified and directed. 86 Supply only fan bearing of suitable size for wall mounted/Pedastal fan of 400 mmsweep complete all as specified and directed. 87 Material and labour for winding of wall mounted fan400mm sweep of any make with super enamelled copper winding wire of existing gauge (wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of sizenot less than0.75 mm of length not more than one meter with each fan complete all as specified and directed. Note :- (i) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. 88 Material and labour for winding of wall mounted/Pedastal fan450mm sweep of any make with super enamelled copper winding wire of existing gauge (wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size not less than0.75 mm of length not more than one meter with each fan complete all as specified and directed. Note :- (i) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. 89 Removing the window/ split type AC of 1.5/ 2 ton capacity of any make from any location for carrying out servicing complete as and when directed and installing back at original location, testing and commissioning complete all as specified and directed.Note :- The rate of following deemed to be included in quoted rate :-a) Cleaning the body, evaporator and condenser with detergent, combing the pins and flushing with air blowerb) Checking electrical connection, cleaning, Greasing, oiling, fan/blower motor, cleaning of air filter with blowerc) Wrapping suction and discharge pipe with foam insulation and white roll ,changing drainage pipe when necessary d)The unit rate quoted by the tenderer inclusive for Removing, servicing,installation, commissioning and testing of all equipment’s,tools and plants, and back in on final position complete (e) The work shall be done by a specialized team of Engineer/Technicians of OEM.(f) Spares will be measured and paid separately.(g) Refrigerant gas will be measured & paid separately. 90 Supply and fixing Blower of indoor unit suitable for 1.5 Ton / 2 Ton splitAC including taking down existing unserviceable one at any location complete all as specified and directed. 91 Supply and fixing Filter (in replacement) suitable for split type Air Conditioner of any make upto 2 TR capacity, including taking down existing one complete all as specified and directed. 92 Supply and fix Over load relay (in replacement) suitable for split type Air Conditioner of any make up to 2.0 TR capacity, including taking down existing one complete all as specified and directed. 93 Supply and fixingHermetic sealed/Rotory new compressor for 1.5 TR split type AC capacity including disconnecting the electrical and refrigerant connection of defective sealed unit ofsplit type ACof capacity 1.5 Ton and connection of all pipe line & charging of refrigerant and testing complete including taking down existing one complete all as specified and directed. 94 Supply and fix polyurethane foam insulation indoor to outdoor unit suitable for 1.5 Ton to 2 Ton split type A/C of any type and at any locationincluding taking down existing one complete all as specified and directed. 95 Supply and fix discharge valve suitable for 1.5 Ton/2 Ton of split type AC including taking down existing one complete all as specified and directed. 96 Supply and fixing Condenser Fan motor (in replacement) suitable for window type Air Conditioner of any make up to and including 1.5/2.0 TR capacity,including taking down existing one and complete all as specified and directed. 97 Supply and fix Suction valve suitable for 1.5 Ton/2 Ton of split type AC of existing make complete all as specified and directed. 98 Supply and fixing Blower motor (in replacement) suitable for split type Air Conditioner of any make up to 2 TR capacity including taking down existing unserviceable one, complete all as specified and directed. 99 Supply and fixing as in repair offlexible PVC pipe of suitable size for indoor unit drain water of split AC suitable for any type and any capacity complete all as specified and directed. 100 Supply and fixas in repair dummy nut of dia 3/8 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and directed. 101 Supply and fix dummynut of dia 1/4 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and directed. 102 Supply and fix as in repair dummy nut of dia 5/8 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and directed. 103 Supply and fix as in repair dummy nut of dia 1/2 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and directed. 104 Supply and fixing Remote assembly corded/cordless (in replacement) for any type and size of split type ACs, upto 2.0 TRincluding taking down existing one complete all as specified and directed. 105 Supply and fixingCondenser coil (in replacement) after disconnecting the refrigerant connection of defective condenser coil unit of split type ACupto 2.0 TRand replacing the condenser coil unit connectingthe same unit withrefrigerant connections complete including taking down existing one complete all as specified and directed. 106 Supply and fixing Front grill (in replacement) suitable for split type Air Conditioner of any make up to 2 TR capacity, including taking down existing one all as specified and directed. 107 Supply and fix MS wall bracketsuitable for fixing of out door unit of split type Air Conditioner with necessary nuts, bolts & washers and removing old unserviceable items and making good disturbed surfaces to match with the existing complete all as specified and directed. 108 Supply and fixingHermetic sealed/Rotory new compressor for 2 TR split type AC capacity including disconnecting the electrical and refrigerant connection of defective sealed unit ofsplit type ACof capacity 2 Ton and connection of all pipe line & charging of refrigerant and testing complete including taking down existing one complete all as specified and directed. 109 Supply and fix Condenser coil (in replacement) after disconnecting the refrigerant connection of defective condenser coil unit of split type ACupto 1.5 TRand replacing the condenser coil unit connectingthe same unit withrefrigerant connections complete including taking down existing one all as specified and directed. 110 Supply and fix as in repair PVCinsulated multi stranded copper conductor 3 core 2.5 sq.mm, including connecting up and taking down existing unserviceable cable of any description and size complete all as specified and directed. 111 Supply and fixing Remote sensing unit (in replacement) for upto 2.0 TR split type AC including taking down existing unserviceable one complete all as specified and directed. 112 Supply and fixindoor unit including blower fan , PCB board and all accessories capacity 1.5/2.0 Ton split type A/C including taking down existing unserviceable one any type complete all as specified and directed. 113 Material and labourfor shifting of Air Conditioner, Split type capacity up to 2 TR from existing location to new location as per user requirement and installing, toping up of gas, replacement of copper tubing connecting up, commissioning and testing complete all as specified and as directed.Note :- The rate for following works deemed to be included in quoted rate :-(a)Transportation of air conditioner any type any capacity from one to other location. (b) Fixing only base plate with necessary fixing material on stone / brick walls and as directed (c) Fixing only outdoor and indoor units as required and directed (d) Connecting indoor / outdoors units of split ACs with copper tubes, flairs nuts, warping suction and discharge lines with inclucating materials with necessary fixing arrangements such as bolts, nuts washers and clamps etc. on walls (e) fixing PVC pipes 50mm dia for outlet of outdoor units to drain out dew water with necessary clamps. (f) Fixing of wall mounting voltage stabilizer of 3 KVA to 5 KVA capacity on the wall with necessary fixing arrangements such as bolts, nuts washers and clamps etc on wall. (g) Fixing PVC hose/ PVC pipes of 15mm sizes as reqd at site with necessary junction boxes, PVC bends etc. including two length of PVC copper cables of 4 sqmm size for electrical connection of ACs. (h) No additional payment shall be made for leakage of gas occurring during shifting of Air Conditioner and topping up of required gas.(j)Fixing of copper tubing of qty of required size. 114 Supply and fixing as in repair ofCopper tubing of size 1/2 flare size conforming to relevant IScomplete all as specified and directed. 115 Supply and fixing as in repair ofCopper tubing of size 1/4 flare size conforming to relevant IS complete all as specified and directed. 116 Supply and fixing as in repairof Copper tubing of size 5/8 flare size conforming to relevant IS complete all as specified and directed. 117 Supply and fixing as in repair of Copper tubing of size 3/8 flare size conforming to relevant IScomplete all as specified and directed. 118 Supply and fix PCB board of any make for indoor unit of split AC 1.5 Ton/ 2 Tonincluding taking down existing one complete all as specified and directed. 119 Removing old unserviceablesplit type air conditioner outdoor unit frameand Supply and fixoutdoor unit frame ofthesplit type air conditioner 1.5/2 TR capacity, complete with refixing with all accessories such as hermetically sealedcompressor andcondenser unit, capacitors, relays, fan motor, duly prewired and including connecting of existing refrigerant gas piping, electrical connections and testing etccomplete all as specified and directed. 120 Supply and fix 3 pin metal clad plug top 20 Amps, AC 230 volts for any type of AC including taking down existing unserviceable one complete all as specified and as directed. 121 Supply and fix single phase single pole contactor suitable for 1.5/ 2.0 split type AC complete all as specified and as directed. 122 Supply & fix metal clad switch socket single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A concealed in walls complete all as specified and as directed.Make : Havells/ Indo asian/ Legrand 123 Supply and fix flair nut of dia 5/8 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and as directed. 124 Supply and fix flair nut of dia 1/2 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and as directed. 125 Supply and fix flair nut of dia 3/8 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and as directed. 126 Supply and fix flair nut of dia 1/4 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and as directed. 127 Supply and fix flair nut of dia 1/16 suitable for 1.5 Ton/2 Ton of split type AC complete all as specified and as directed. 128 M&L core cutting ofof size 50 mm dia in stonewall with the help of machineand preparing surface to make goodmatching with existing surface coloured complete all as specified and directed. 129 Supply and fix overload protector forsplit AC 1.5/2 Ton TR capacity including taking down existing unserviceable one complete all as specified anddirected. 130 M&L core cutting ofof size 50 mm dia in bricks wall with the help of machineand preparing surface to make goodmatching with existing surface coloured complete all as specified and directed. 131 Material and labour for pressure testing and rectifying the leakages found in the system of window/ split type ACs up to 2 Ton capacity including vacumizing, charging and checking the gas pressure to desire level complete for satisfactory functioning complete all as specified and directed.Note: Toping up of gas shall be measured and paid separately 132 Repair and maintenance of inverter type splitAC of any capacity / any Make from any location including attending breakdown calls, routine maintenance and servicing ,testing and commissioning all as specified and directed here under :-a) Cleaning the body, evaporator and condenser with detergent, combing the pins and flushing with air blower.b) Checking electrical connection, cleaning, Greasing, oiling, fan motor, cleaning of air filter with blower.(c) Testing all copper tube ,joints, leads for any leaking and Top up with the refrigerant gas if necessary.(d)The work shall be done by a specialized team of Engineer/Technicians of OEM. 133 Supply and fix DC blower fan motor for inverter split AC of 1.5 Ton to 2 Ton capacity and including taking down existing unserviceable one of any capacity and at any location complete all as specified and directed. 134 Supply and fixingPCB board of inverter type split type ACfor 1.5 Ton/2 Ton capacity including taking down existing unserviceable one at any location complete all as specified and directed. 135 Taking out, inspection, checking adjustment and minor repair of unserviceable refrigerator 165/175/180/185/190/260/277/286/290/308/310/315/350/360/375 ltr capacity of any type any make for repair/ replacement of defective parts such as condenser, PVC pipe, loose electrical connection etc., cleaning, condenser unit of foreign particle and descaling with carbon di oxide gas to ensure smooth flow of refrigerating gas, reassembling the appliance, testing and placing in original position complete all as specified and as directed .Note :- Repair/ replacement of unserviceable parts shall be measured and paid separately complete all as specified and as directed . 136 Supply and fixingEvaporator coil, suitable for refrigerator of 260 to 308 ltrs any make size and type (in replacement)complete all as specified and as directed. 137 Supply and fixingChiller tray (in replacement) suitable for Refrigerator of any make, 260 to 308 litres capacity,complete all as specified anddirected. 138 Material and labour for Freezer compartment including door and accessories suitable for refrigerator 260, 286,308, 315 and 350 ltrs capacity refrigerator and including taking existing unserviceable one complete all as specified and as directed. 139 Supply and fixinghermetically sealed new compressor (in replacement) for 260 to 308 Ltrcapacity of refrigeratorincluding filling of refrigerant suitable and testing complete by disconnecting the electrical and refrigerant connection of defective sealed unit of Refrigerator compressor of capacity 260 to 308 litres complete all as specified and directed. 140 Supply and fixingVegetable tray (in replacement) suitable for Refrigerator of any make, 260 to 308 litres capacity,complete all as specified and as directed. 141 Supply and fixingin replacement condensing coil for refrigerator of capacity 260 to 308 Ltr complete all as specified and directed. 142 Material and labourfor pressure testing and rectifying the leakage found in the system of refrigerator of capacity 260 to 308 litres including vacuuming and charging the refrigerant gas to the desired pressure and filling new compressor oil etc. complete for satisfactory functioning complete all as specified and as directed.Note:Topping up of gas shall be measured and paid separately 143 Supply and fixingPVC shelf transparent type of tough plastic suitable for refrigerator of capacity 260 to 308 ltrs complete including taking down existing unserviceable one complete all as specified and directed. 144 Supply and fixing superior quality plastic/PVC Ice cube tray for refrigerator of capacity 260 Ltrs to 308 ltrs complete all as specified and directed. 145 Supply and fix in repair electric bulb 20 watt 230v threaded type for refrigerator of Capacity 260 ltrs to 308 ltrs complete all as specified and directed. 146 Material and labourfor pressure testing and rectifying the leakage found in the system of refrigerator of capacity 165 to 260 litres including vacuuming and charging the refrigerantgas to the desired pressure and filling new compressor oil etc. complete for satisfactory functioning complete all as specified and directed.Note:Topping up of gas shall be measured and paid separately 147 Supply and fix in repair magnetic beading for refrigerator of cap 165 ltrs to 335 ltrs complete all as specified and directed. 148 Supply and fixingEvaporator coil, suitable for refrigerator of 165 to 260 ltrs any make size and type (in replacement) complete all as specified and directed. 149 Material and labour for preparing the old painted surface of refrigeratorof capacity 165 litres to 350 litres and spray painting with synthetic enamel paint of approved colour complete all as specified and directed. 150 Supply and fixinghermetically sealed new compressor (in replacement) for 165to 260 Ltrcapacity of refrigeratorincluding filling of refrigerant suitable and testing complete by disconnecting the electrical and refrigerant connection of defective sealed unit of Refrigerator compressor of capacity 165 to 260 litres complete all as specified and directed. 151 Supply and fixingRelay, box type, suitable for refrigerator of any make 165 to 335 litres capacity (in replacement) fixed in repairs, complete all as specified and directed. 152 Supply and fixingChiller tray (in replacement) suitable for Refrigerator of any make, 165 to 260 litres capacity,all as specified and directed. 153 Supply and fixing Freezer compartment including door and accessories suitable for refrigerator 165/175 ltrs capacity refrigerator and including taking down existing one complete all as specified anddirected. 154 Supply and fixingin replacement condensing coil for refrigerator of capacity 165 to 260 Ltr complete all as specified and directed. 155 Supply and fixingin replacement Gasket, suitable for door of Refrigerator of any make, 165 to 350 litres capacity, fixed in repairs all as specified and directed. 156 Supply and fixingMulti capacitors 2 µfd for cooling appliances including taking down existing unserviceable one complete all as specified and as directed. 157 Supply and fixingVegetable tray (in replacement) suitable for Refrigerator of any make, 165 to 260 litres capacity,complete all as specified and directed. 158 Supply and fixingTimer and sensor of Refrigerator including taking down existing unserviceable one complete all as specified and as directed . 159 Supply and fixingCopper capillary tubesuitable forrefrigeratorincluding taking down existing unserviceable one, any description complete all as specified and directed. 160 Supply and fixingFilter of refrigerator including taking down existing unserviceable one complete all as specified and as directed. 161 Supply and fixingThermostat, suitable for refrigerator of any make 165 to 350 litres capacity (in replacement) all as specified and directed. 162 Supply and fixingin replacement condensing coil for refrigerator of capacity 308 to 350 Ltr complete all as specified and directed. 163 Supply and fixinghermetically sealed new compressor (in replacement) for 308 to 350 Ltrcapacity of refrigeratorincluding filling of refrigerant suitable and testing complete by disconnecting the electrical and refrigerant connection of defective sealed unit of Refrigerator compressor of capacity 308 to 350 litres complete all as specified and as directed. 164 Supply and fixingEvaporator coil, suitable for refrigerator of 308 to 350 ltrs any make size and type (in replacement)complete all as specified anddirected. 165 Servicing theVoltage Stabilizer 0.5 KVA to 2 KVA single phaseafter replacing transformer, PCB,u/s electronic parts, setting/testing of buck/boost relay, assembleback & fixing in its original position including testing for proper functioningcomplete all as specified and as directed. 166 Supply and fixingOver load protector for refrigerator including taking down existing unserviceable one any description complete all as specified and as directed.. 167 Supply and fixingStarting relay suitable for refrigerator including taking down existing unserviceable one complete all as specified and as directed 168 Supply and fixingMulti capacitors 2.5 µfd for cooling appliances including taking down existing unserviceable one complete all as specified and as directed. 169 Material and labourfor pressure testing and rectifying the leakage found in the system of refrigerator of capacity 308 to 350 litres including vacuuming and charging the refrigerantgas to the desired pressure and filling new compressor oil etc. complete for satisfactory functioning complete all as specified and directed.Note: Topping up of gas shall be measured and paid separately 170 Servicing theVoltage Stabilizer 4 KVA to 5 KVA single phaseafter replacing transformer, PCB,u/s electronic parts, setting/testing of buck/boost relay, assembleback & fixing in its original position including testing for proper functioningcomplete all as specified and as directed. 171 Supply and fixingMulti capacitors 4 µfd for cooling appliances including taking down existing unserviceable one all as specified and as directed. 172 Taking out, inspection, checking adjustment and minor repair of unserviceable water cooler 40/80/60/120/150/180 ltr capacity of any type any make for repair/ replacement of defective parts such as condenser, PVC pipe, loose water tap, float valve, loose electrical connection etc., cleaning condenser unit of foreign particle and descaling with carbon di oxide gas to ensure smooth flow of water cooler gas, reassembling the appliance, testing and placing in original position complete all as specified and as directed .Note :- Repair/ replacement of unserviceable parts shall be measured and paid separately complete all as specified and as directed . 173 Supply and fixingElectric condenser Fan motor, AC 230 volt, single phase with recommended RPM etc. (in replacement) suitable for water coolerof any make of 150/180 litres capacity, complete all as specified and directed. 174 Taking down corroded bottom portion of water cooler of 150 litres capacity and provision of 14 gauge MS sheet with suitable size angle iron frame work duly welded to the body of the water coolerincluding two coats of synthetic enamel painting over a coat of red oxide primer to match the existing colour all as specified and directed. 175 Supply and fix Stainless steel tray (in replacement) suitable for water cooler of160 to 180 Litres capacity complete all as specified and directed. 176 Supply and fixingDoor gasket (in replacement) suitable for lid of water cooler up to 150 litres capacity, complete all as specified and directed. 177 Supply and fixinghermetic sealed new compressor (in replacement) for water cooler 150 litre/Hr cooling capacityincluding disconnecting the electrical and refrigerant connection of defective sealed unit of storage type water cooler of capacity 150 litres and connection of all pipe line & charging of refrigerant and testing complete including taking down existing one all as specified and directed. 178 Supply and fixingPVC drain out pipe 32 mm dia bore (in replacement) as per existing including providing necessary GI clamps, nut bolt etc.all as specified and directed 179 Supply and fixingSelf closing push type Bib tap 15mm diamade out of cast copper alloy chromium plated (in replacement) suitable for water cooler conforming to ISI mark, including testing and leak proof etc. complete all as specified and directed. 180 Supply and fixingball brass valve high pressure 15mm dia complete fitting such as PVC polythene ball, layer check nut washer etc for water cooler of any capacity including taking down existing one all directed. 181 Supply and fix in replacement of gun metal gate valve 15mm dia including GI nipple including taking down existing one all as specified and as directed 182 Material and labourfor preparing the old painted surface of the water coolers of capacity cap 150 Litres and spray painting with synthetic enamel paint over one coat of red oxide primer including replacement of worn out nut, bolt, washer, screw and writing MES No and capacity all as specified and directed. 183 Material and labourfor pressure testing and rectifying the leakages found in the system of water cooler of capacity 150 litres and vacuuming and charging refrigerant gas and filling new compressor oil etc. complete for satisfactory functioning all as specified and directed.Note:Topping up of gas shall be measured and paid separately 184 Supply and fixingElectric condenser Fan motor, AC 230 volt, single phase with recommended RPM etc. (in replacement) suitable for water coolerof any make of 60/120 litres capacity, including taking down existing one all as specified and directed. 185 Supply and fixinghermetic sealed new compressor (in replacement) for water cooler 60/120 ltr/Hr cooling capacityincluding disconnecting the electrical and refrigerant connection of defective sealed unit of storage type water cooler of capacity 60/120 litres and connection of all pipe line & charging of refrigerant and testing complete all as specified and directed. 186 Material and labourfor pressure testing and rectifying the leakages found in the system of water cooler of capacity 60/120 litres and vacuuming and charging refrigerant gasand filling new compressor oil etc. complete for satisfactory functioning all as specified and directed.Note: Topping up of gas shall be measured and paid separately 187 Taking down corroded bottom portion of water cooler of 40/80 litres capacity and provision of 14 gauge MS sheet with suitable size angle iron frame work duly welded to the body of the water coolerincluding two coats of synthetic enamel painting over a coat of red oxide primer to match the existing colour all as specified and directed. 188 Supply and fixingElectric condenser Fan motor, AC 230 volt, single phase with recommended RPM etc (in replacement) suitable for water coolerof any make of 40/80 litres capacity, complete all as specified and as directed. 189 Supply and fix Stainless steel tray (in replacement) suitable for water cooler of 40/ 80 litres capacity all as specified and directed. 190 Supply and fixingCondensing coil suitable for water cooler of capacity 40/80 ltr/hr cooling capacity (in replacement) complete all as specified and as directed. 191 Supply and fixingEvaporator coil suitable for water cooler of capacity 40/80 ltr/hr cooling capacity (in replacement) complete all as specified directed. 192 Supply and fixinghermetic sealed new compressor (in replacement) for water cooler 40/80 ltr/Hr cooling capacityincluding disconnecting the electrical and refrigerant connection of defective sealed unit of storage type water cooler of capacity 40/80 litres and connection of all pipe line & charging of refrigerant and testing complete all as specified and directed. 193 Material and labourfor preparing the old painted surface of the water coolers of capacity of 40/80 Litres and spray painting with synthetic enamel paint over one coat of red oxide primer including replacement of worn out nut, bolt, washer, screw and writing MES No and capacity complete all as specified and as directed. 194 Material and labourfor pressure testing and rectifying the leakages found in the system of water cooler of capacity 40/ 80 litres and vacuuming and charging refrigerant gasand filling new compressor oil etc. complete for satisfactory functioning all as specified and directed.Note: Topping up of gas shall be measured and paid separately 195 Supply and fixingCarbon (filter) 12” size incl taking down old unsv complete all as specified and as directed. 196 Supply and fix in replacement of filter for water cooler of any size any make complete all as specified and as directed. 197 Supply and fixingMulti capacitors 4.5 µfd for cooling appliances including taking down existing unserviceable one complete all as specified and as directed. 198 Supply and charging of refrigerant gas R-134a to water cooler,refrigerator and deep freezer air conditioner of any type, make and capacity all as specified and directed.(i) Empty cylinder shall be returned to contractor.(ii) Payment shall be made for net weight of gas filled. 199 Material and labourfor repairing the leakage in the steel water tank of water cooler of any capacity by welding brazing/ soldering complete all as specified and directed. 200 Supply and fixingMulti capacitors 6 µfd for cooling appliances including taking down existing unserviceable one complete all as specified and as directed. 201 Material and labourfor taking down of ceiling fan of size 1200/1400mmsweep for safety checking by replacingdefective parts/painting/rewinding and re-fixing the ceiling fan after repairs, all as specified and as directed by Engr-in-charge. (Note:- The replacement of unserviceable items like capacitor, Bearings, Bush, Canopy, down rod etc. shall be made as directed which will be measured and paid separately under respective items as Supply only. However,parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional andmaking connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.5 Sqmm from ceiling rose/ connector fan (minimum 0.50 Mtr length) including cost of labour for above replacement aredeemed to be inclusive in quoted rate all as directed. 202 Note:- The following items shall be deemed to be inclusive in the unit rate quoted against Sl Item No 201(a) In each job, checking the functioning of fan including its connections, cleaning of fan, greasing of fan and mechanical check i.e. tightening of loose screw, nuts, bolts, etc are inclusive in unit quoted rate. 203 (b)The above job shall be carried out by a trained electrician having qualified in ITI ( electrician Trade), documentary proof of the education of tradesman shall be produced to the Engr-in- Charge, before commencement of work. 204 (c)Replacement of unserviceable parts like rubber bush, clamps, bolts, nuts, washers, safety pin, bearing etc shall be paid under respective item here-in-after as supply only through proper documentation. 205 (d)The entire job shall be carried out inAir Force stn Jalahalli 206 (e)Necessary T&P such as ladder, required manpower for taking down and refixing after repair shall be of contractors responsibility. 207 (f)All types of T&P, PVC insulation tape, minor nuts, bolts, washers etc required for maintaining the services shall be provided by contractor without any extra cost to the department. 208 (g)Any fan found defective/not working shall be brought to AGE E/M store yard & re-fixed after repairing. 209 (j)In case of major defects, entire job shall be completed within 10 days from the date of registration of complaint, failing which penalty charges @100/- per day shall be recovered. 210 (k) In case of minor defects, entire job shall be completed within12 hrs from the time of registration of complaint, failing which penalty charges @ 50/- per job shall be recovered. 211 Supply onlyfan bearing suitable forceiling fan 1200mm /1400 mm sweep (bearing with 8 balls shall be used ) Make:- NBC/TATA/SKF 212 Supply only rotor of ceiling fan of any size complete all as specified and directed. 213 Supply onlygun metalbush of suitable size for ceiling fan 1200mm /1400 mm sweep complete all as specified and directed. 214 Supply only fan canopies for ceiling fan size of 1200mm/1400mm sweep complete all as specified and directed. 215 Supply onlydown rod for ceiling fan with 15mm dia (of length not less than 45cm and not more than 60cm) with hanging clamps for ceiling fan complete all as specified and directed. 216 Supply only Rubber reel bushes for ceiling fan of size 1200/1400mm sweep complete all as specified and directed. 217 Supply only steel screw (for fixing of fan blade) as per site requirement for any make of ceiling fan complete all as specified and directed. 218 Supply onlyouter body of ceiling fan of any size complete all as specified and directed. 219 Supply onlydown rod for ceiling fan with 15mm dia (of length not less than 180cm and not more than 210cm) with hanging clamps for ceiling fan complete all as specified and directed. 220 Supply only U clamp for hanging ceiling fan with all nuts, bolts and washers complete all as specified and directed. 221 Supply onlydown rod for ceiling fan with 15mm dia (of length not less than 90cm and not more than 120cm) with hanging clamps for ceiling fan complete all as specified and directed. 222 Supply onlyblades (made of aluminium) suitable for 1200mm sweep ceiling fan of any make with set of screws complete all as specifiedand directed . 223 Supply only safety cotter pins 40mm to 50mm longwith nuts and bolt with washers for ceiling fan of size 1200/1400mm sweep complete all as specified and directed. 224 Supply onlyblades (made of aluminium) suitable for 1400mm sweep ceiling fan of any make with set of screws complete all as specifiedand directed. 225 Supply and fixing in replacement of unserviceableceiling fan 1200mm sweep, energy efficient BLDCISI mark withstar rating 230 Volts AC 50 Hz, single phase including provision of fixing arrangement, nut and bolt andflexible copper cable 3 core of size 1.5 sqmm not less than 0.5 m long complete including taking down existing one, writing MES No with synthetic enamel paint all as specified and as directed. Make : Havells/Bajaj/ Orient.Note:-(a)Old Unserviceable ceiling fan shall be deposited to MES store yard. 226 Material and labour for winding of ceiling fan motor 1200 mm sweep of any make with super enamelled copper winding wire of existing gauge (wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size not less than0.75 m of length not more than one meter with each fan complete all as specified and directed. (i) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. (ii) taking down of fan, and re hanging measured under item No. 201 separately. 227 Material and labour for winding of ceiling fan motor 1400 mm sweep of any make with super enamelled copper winding wire of existing gauge (wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size not less than0.75 m of length not more than one meter with each fan complete all as specified and directed. (i) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. (ii) taking down of fan, and re hanging measured under item No. 201separately. 228 Taking down aluminium/copper point wiring & including hard wood battens, surface conduit and board/ blocks etc or through conduits for light, socket or power point, fan point complete and making good the disturbed plaster surfaces of wall, floor, ceilingand painting 2 coat of white wash/distamber to match the existing surface, complete all as specified and directed. 229 M & L for Point wiring with PVC insulated FRLS 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn through and including surface PVC conduit/existing concealed conduit/PVC casing-caping etc as per site requirement onwalls / roofs / floors / ceiling etc and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly with all fitting and fixing accessories including sunk in cast iron / pressed steel terminal boxes (duly painted with two coats of anti corrosive paint out side and two coats of aluminium paint inside ) with 3.0 mm thick hylum brand laminated white bakelite sheet cover for mounting switches, sockets, fans regulators etccomplete for the following :-Make of wire: Polycab/Plaza/HavellsNote: (a) Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely). 230 All as per item No. 229here in before but forOne light point/fan point controlled by one way 5 Amp switch. 231 All as per item No. 229here in before but forOne light point controlled by two way 5 Amp switch. 232 All as per item No. 229here in before but for one bell point controlled by one way bell push. 233 All as per item No. 229here in before but forOne 3 pin socket out let 5 Ampon the same board 234 All as per item No. 229 here in before but for one switch socket outlet 3 pin 5 Amps on independent board 235 All as per item No. 229here in before but for Wiring with 2.5 Sqmm copper multistranded unsheathed cable and2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently complete all as specified and directed. 236 All as per item No. 229here in before but for Wiring with 4 Sqmm copper multistranded unsheathed cable and4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently complete all as specified and directed. 237 Supply and Fix switch piano flush type 5 Amps240 volts single pole one way, complete all as specified and directed. Make : Anchor/Havells/L&T/Indoasian 238 Supply and Fix switch piano flush type 5 Amps240 volts single pole two way, complete all as specified and directed. Make : Anchor/Havells/L&T/Indoasian 239 Supply and Fix switch piano flush type 5 Amps240 volts bell push, complete all as specified and directed. Make : Anchor/Havells/L&T/Indoasian 240 Supply and Fix shuttered socket outlet 3 pin 5 Amps, flush type, complete all as specified and directed. Make : Anchor/Havells/L&T/Indoasian 241 Supply and Fix shuttered switch socket outlet 3 pin 5 Amps, flush type, complete all as specified and directed. Make : Anchor/Havells/L&T/Indoasian 242 Supply and Fix shuttered switch socket outlet 2 in 1, 3 pin, 5 and15 Amps, complete all as specified and directed.Make : Anchor/Havells/L&T/Indoasian 243 S & F ceiling rose surface bakelight two to three terminal complete all as specified and directedMake : Anchor/Havells/L&T/Indoasian 244 S & F in repairfan regulator 120W,for ceiling fan complete all as specified and directed Make : Anchor/Havells/L&T/Indoasian 245 S & F2.5 mfd condensor for ceiling fan, complete all as specified and directed. Make : Epcos/ Asian/ Tyton 246 S & Felectric bell, AC 230 volt, single pole Ding Dong type complete all as specified and directed. Make :Anchor/Havells/L&T 247 M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable size surface PVC casing caping/PVC Conduit and all accessories fixed to wall/floors along with 4 Sqmm surface PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.Note: (a)2 runs of 4 Sqmm cable along with one run of 4 Sqmm cable for earth conductor shall be measured as one lengthMake:- Havells/ Polycab/ Plaza. 248 S&F in replacementfactory madepowder coated distribution board VTPN, 4 way double doorMCCB DB includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DBcomplete all as directedMake : Indoasian/ Havells/ Legrand. 249 S&F in replacement distribution board MCCB four pole, 100 Amp ultimate breaking capacity 16 KAconforming to IEC -61439-1, complete all as specified and directed. Make : Legrand/ L&T/ Indo Asian 250 Supply and Fixing in repairs of 4 feet surface mounted batten type luminaire , lumen output of 2000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability .The luminaire and driver shall be BIS approved, complete all as specified and directed.Make : Philips/ Bajaj / CG/Havells. 251 Supply and Fixin replacement ofsurface mounted Square/Roundfor LED 18W Watt downlights made of extruded Aluminium housing and high power LED light source withDriver clear diffuser with separate electronic driver with complete accessories all as specified and directed.Make : Philips/ Bajaj/ CG/Havells. 252 S&F in replacement factory madepowder coated distribution board SPN 12 way double door,includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DB conforming to IS: 8623, all as specified and directed. Make : Legrand/ L&T/ Indo Asian 253 S&F in replacement distribution board MCCB four pole, 63 Amp ultimate breaking capacity 16 KAconforming to IEC -61439-1, complete all as specified and directed. Make : Legrand/ L&T/ Indo Asian 254 S&F in repairs 35/36 W (WH) LED Surface type2x2 ft luminaire with classic design & glare free soft illumination. housing with white high reflection powder coated (RAL9016) CRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle of 100° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85% with built-in Surge protection 3Kv. System Lumen Output of 3000 lumens.Make : Philips/ Bajaj/CG/Havells. 255 S&F in repairs LED bed side light /wall light/study lightenvironmentel friendly energy effcient of capacity3 W warm whiteetc,inbuilt drivercomplete with all accessories internally pre-wired swing type and including connecting up towith twin core twisted flexible copper conductor cable with suitable size complete all as directed . Make : Bajaj/ Philips / Wipro/CG 256 Supply & Fixing in replacement of electronic LED driver 2/3 W suitable for bed side light fitting as per site requirement complete all as specified and directed . 257 M & L for Point wiring with PVC insulated FRLS 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including concealedrigid non mettalic PVC conduit/casing caping medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed in wall/surface/roofs/floor/ceiling etc as per site requirement and making & matching the existing surface) white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc or modular cover plate with frame including sunken boxes suitableto fix modular cover plate with frame, concealed in wall or 1.5 sq mm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly complete all as specified and directed for the following :- Make of wire: Polycab/Plaza/HavellsNote:Blanking plate,Modular cover plate ,Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely). 258 All as per item No. 257 here in before but for one light point/fan/bell point controlled by one wayswitch. 259 All as per item No. 257here in before but for one light point controlled by twowayswitch. 260 All as per item No. 257here in before but for one bell point controlled by one bell push. 261 All as per item No. 257 here in before but for one 3 pin socket out 5 Ampon the same board 262 All as per item No. 257 here in before but for one switch socket outlet 3 pin 5 Amps on independent board 263 All as per Sl No 257 above but Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently etc complete all as specified and directed. 264 All as per Sl No. 257 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently complete all as specified and directed. 265 Supply and Fixmodular switch1 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian 266 Supply and Fixmodular switch2 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor /Indoasian 267 Supply and Fixmodular switchbell push .1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor /Indoasian 268 Supply and Fixmodular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian 269 Supply and Fixmodular switch1 way 16 Amp.1 module, complete all as specified and directed. Make :Legrand/ Crabtree/ Anchor /Indoasian 270 Supply and Fix modular Socket, 16A - 2/3 pin combined 2 module, complete all as specified and directed. Make : Legrand/ Crabtree/ Anchor/Indoasian 271 Supply and fix White cover plate with frame,2/3 module 272 Supply and fix White cover plate with frame,4 module 273 Supply and fix White cover plate with frame,8 module 274 Supply and fix White cover plate with frame,6 module 275 Supply and fix White cover plate with frame,12 module 276 S & F Modular fan regulator 120W, 2 Module for ceiling fan complete all as specified and directedMake : Legrand/ Crabtree/ Anchor 277 M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 Sqmm drawn through in and incl suitable size surface PVC casing caping/PVC Conduit and all accessories fixed to wall/floors along with 6 Sqmm surface PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size.Note: (a)2 runs of 6 Sqmm cable along with one run of 6 Sqmm cable for earth conductor shall be measured as one lengthMake:- Havells/ Polycab/ Plaza. 278 S&F in replacement factory madepowder coated distribution board SPN 8 way double door,includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DBconforming to IS: 8623, all as specified and directed. Make : Legrand/ L&T/ Indo Asian 279 S & F MCB in replacement ofSPN 240 volts 40 to 63 Amps complete including taking down unserviceable fitting complete all as specified and as directed .Make : Legrand/ L&T/ Indo Asian. 280 S&F in replacementfactory madepowder coated distribution board TPN, 4 way double doorMCBDB includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DBcomplete all as directedMake : Indoasian/ Havells/ Legrand. 281 S & F in replacement TPN, MCB 40 to 63 Amp, 240 v, 50 Hz ACsuitable for ‘C’ curve, 10 KA breaking capacitycomplete conforming to IS 8828 of 1996, all as specified Make : Legrand/ L&T/ Indo Asian 282 S&F in repairs 35/36 W( WH) LED recessed type 2x2 ft luminaire with classic design & glare free soft illumination. housing with white high reflection powder coated (RAL9016) CRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle of 100° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85% with built-in Surge protection 3Kv. System Lumen Output of 3000 lumens.Make : Philips/ Bajaj/CG/Havells. 283 Supply & Fixing in replacement of electronic LED driver 35/36 W suitable for round ceiling light indoor fitting of make Philips/ crompton/ Bajaj, complete all as specified and directed . 284 Supply & Fixing in replacement of electronic LED driver 9/10 W suitable for round ceiling light indoor fitting of make Philips/ crompton/ Bajaj, complete all as specified and directed . 285 S & Fin replacement 7/9 watt LED lamp, complete all as specified and directed. Make : Philips/ Bajaj/ Crompton 286 S&F in replacement factory madepowder coated distribution board SPN 6 way double door,includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DBconforming to IS: 8623, all as specified and directed. Make : Legrand/ L&T/ Indo Asian 287 S & F in replacement of MCB single pole 240 volts 6 to 32 Amps complete including taking down unserviceable fitting complete all as specified and as directed.Make : Legrand/ L&T/ Indo Asian. 288 S & F in replacement TP, MCB 40 to 63 Amp, 240 v, 50 Hz ACsuitable for ‘C’ curve, 10 KA breaking capacitycomplete conforming to IS 8828 of 1996, all as specified Make : Legrand/ L&T/ Indo Asian 289 Supply and Fixing in repairs of 2 feet surface mounted batten type luminaire , lumen output of 1000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability .The luminaire and driver shall be BIS approved, complete all as specified and directed.Make : Philips/ Bajaj / CG/Havells. 290 Refixingexisting serviceable LED light fitting fixture any capacity and of any type complete with all accessories internally pre-wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable of suitable size after cleaning all dust etc. completeall as specified and as directed . 291 S&F in repairs 35/36 W (WH) LED recessed type1X4 ftluminaire with classic design & glare free soft illumination. housing with white high reflection powder coated (RAL9016) CRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle of 100° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85% with built-in Surge protection 3Kv. System Lumen Output of 3000 lumens.Make : Philips/ Bajaj/CG/Havells. 292 S&F in replacement factory madepowder coated distribution board SPN 4 way double door,includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DB conforming to IS: 8623, all as specified and directed. Make : Legrand/ L&T/ Indo Asian 293 S & F MCB in replacement ofSPN 240 volts 32 Amps complete including taking down unserviceable fitting complete all as specified and as directed .Make : Legrand/ L&T/ Indo Asian. 294 S & F in replacement of MCB single pole 240 volts 40 to 63 Amps complete including taking down unserviceable fitting complete all as specified and as directed .Make : Legrand/ L&T/ Indo Asian 295 Excavation in trenches not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth and getting out for laying of cables up to proper level and laying of pipelines etcinsoft/loose soil, complete all as specified and directed. 296 Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed. 297 Removing surplus excavated material (soil) not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point, complete all as specified and directed. 298 Material and labour for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983, complete all as specified and directed.Note :- (i)Excavated approved soil shall be ribbed by using sieve to separate composite particles etc. as per IS and refilling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is then gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness shall be considered for payment. 299 Material and labour for well burnt bricks ‘B’ class as mechanicalprotection to under ground cables laying with length of the bricks equal to the width of the trench, complete all as specified and directed. 300 Material and labour for Cutting existing road/PCC/Drain for laying of GI or any type of pipe including necessary earthwork, excavation exc 600mm depth but not exc 1mtr depth, 800 mm wide including making good existing surface with 150 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed. Note :-The tenderer shall take into consideration for following points while quoting rate for this item andthe unit rate is deemed to be inclusive for :-(i) Earth work and excavation in any type of soil(ii) Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick ,complete all as specified and as directed.(iii) Removing excavated material out side MD land.(iv)Laying of any type/any bore of pipe in trenches including taking down existing unserviceable pipe. Supply of pipe shall be measured and paid separately(v)150 mm thickPCC 1:2:4 type B1 using 20mm graded stone aggregate as inroad to make good existing disturbed surfaces. 301 Material and labour in repair for 4 core 10 Sqmm XLPE insulated heavy duty electric cable with aluminium single stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make : Havells, Polycab, RPG Asian 302 Material and labour in repair for 4 core 16 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make : Havells/Polycab/RPG Asian 303 Material and labour in repair formaking straight through joint with suitablejointing kit consisting of water proof adhesivesfor UG cable of size 4 core 10 Sqmm to 16 Sqmm, complete all as specified and directed. 304 Supply only of GI pipe light grade for cable protection of size 50mm bore with fittings, complete all as specified and directed. 305 Disconnecting of burnt/ damaged cables from panels/ junction boxes etc, cutting out the burnt out ends, making new end joints by supply and fixing new aluminium lugs/ insulation tape etc and reconnecting using new nuts/ bolts/ washer etc and restoring three phase and neutral in the junction box, complete all as specified and as directed for thecable sizefrom 10Sqmmto 16 Sqmm 3.5 core of underground LT armoured cables.Note :- Earth work required for extending the incoming/ outgoing cable in junction box/ panel board etc shall deemed to be included in the unit rate quoted. 306 Supply, installation, testing and commissioning LTFeeder pillar box double door CPRI Testedof Size 400X250X350mmsuitable for 3 phase 415 Volts of suitable size out door made out 3.15mm thick CRCA sheet of outdoor of panel with angle iron frame of size 32x32x5mm cubical type complete with aluminium bus bar 100 Amp and including PCC foundation as per site requairment to accomodated to the following.INCOMING(a)MCB TPN32 Amp 10 KA - 01 No. (b)LEDindicating lampR-Y-B - 03 Nos. OUTGOING(a) Weather Proof panelPlug and shocket angled type IP 67three Phase 3P+N +E, 20 Amp - 01 No(b) Weather Proof plug and shocket angled type IP 67 Single Phase 2P+E , 20 Amp- 01 No.(a)MCB TPN20 Amp 10 KA - 01 No. (a)MCB SPN20 Amp 10 KA - 01 No. 307 M &L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in copping to poleincluding necessary form work slightly rounding or squaring, complete all as specifiedand as directed. 308 M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation and mass concrete for poles and filling around fencing posts etc, complete all as specified and as directed 309 Supply & Erecting Mild steel tubular swaged pole 9 meter long 410, SP-31 complete with cast iron base plate, bracket, finial taper plug, bolt, nuts & screws and painted on both side (internally & externally), external surface painted with two coat of aluminum paint over coat of primer and painting with blackup to 1.5 meter from top of PCC 1:3:6 using 20 mm graded stone aggregate coping white colour paint as in strips of equal width with marking pole numbers by using one coat of synthetic enamel paint including necessary PCC 1:4:8 with 40 mm graded stone aggregate as in foundation and coping as per TD drawing including dismantling of old damaged pole complete all as specified and as directed.Note (i)Excavation, earth work and PCC work for embedding pole shall be measured and paid seperately.(ii) Pole upto 1.5 m top of copping shall be painted with 2 coats of black and white strips alternate 30cm each over one coat of red oxide primer (iii) Steel tubular pole above 1.5 m shall be painted with 2 coats of aluminium paint over a coat of red oxide primer. The rate for above items shall be deemed to be inclusive in the quoted rate. 310 Supply and fix in repair weather proof PVC junction box approved by CPRI for street light control box made out of not less than 2mm thick and size 250mm x 200 mm x 105mm (approx) complete with hinged door locking arrangement and consisting of 2 Nos of suitable size cable glands consisting of 01 No. panel mounted connector 4 pole 32A-1 No, MCB SP 6A 10KA-01No, including connecting up with the electrical connections and fixing with clamps etc complete and all as specified anddirected. 311 Supply and fix 1100 Volts grade heavy duty flat weather proof twin core cable of size 4 Sqmm with multistrand aluminium conductor including taking down of old one complete all as specified and directed. Make: Plaza/Polycab/ Finolex/Havells 312 Supply and fixing in repair LED flood light 150 watt made up of die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection and system efficiency ≥ 125 LPW with option for 3000K 10 KV SPD corrosion resistant complete with driver and lampProtection including street light fitting bracket nuts, bolts, washers complete, all as specified and directed. Make:Halonix/Philips/CG/Bajaj 313 Supply and fix in repair bracket for street light fitting made out of40 mm dia light grade GI tubing bent to required shape 1.5m long including necessary GI clamps, nuts bolts and washers and fixing to the pole etc complete all as specified and directed. 314 Supply and fixing in repair Round spherical garden lighting, post top lantern having B22 holder suitable for LED bulb10 watt, 220 volt,50HZ,IP65 including suitable of GI tubing ,length as per site requirement on gate pillars/ garden lights for fixing the lamp, wiring with 1.5 Sqmm PVC insulated strandedcopper conductor includingPCC work for fixing, of light fitting complete all as specified and directed.Make: Philips/ Havells/Bajaj/CG. 315 Suply and fix in repairs LED decorative post top lantern fitting 40W, 230V AC with IP 65 protection and resistant to impact and corrosion with necessary electrical connection completeall as specified as directed. Make: Bajaj / Philips/Halonix/ CG 316 Supply and fix in repair weather proof PVC junction box approved by CPRI for street light control box made out of not less than 2mm thick and size 140x140x100mm (approx) complete with hinged door locking arrangement and consisting of 2 Nos of suitable size cable glands consisting of 01 No. panel mounted connector 4 pole 32 Noincluding connecting up with the electrical connections and fixing with clamps etc complete and all as specified anddirected. 317 Supply and fix 1100 Volts grade heavy duty flat weather proof twin core cable of size 6 Sqmm with multistrand aluminium conductor including taking down of old one complete all as directed and specified. Make: Plaza/Polycab/ Finolex/Havells 318 Supply and fixing LED flood light 100 watt 230 V AC outdoor type including necessary bracket with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including taking down of old unserviceable fitting of any capacity.Make :Bajaj/Philips/CG/Halonix. 319 Supply and fixing in repair IP65 rated LED Bollard with robust design and efficient light distribution 10 watt on existing pipe of any size and height with all accessories prewired fixed with FI clamps nuts bolts etc., including taking down existing fittings all as specified and directed Make : Crompton/ Halonix/Bajaj/ Philips 320 Suply and fix in repairs LED decorative post top lantern fitting 25 W, 230V AC with IP 65 protection and resistant to impact and corrosion with necessary electrical connection completeall as specified as directed. Make: Bajaj / Philips/Halonix/ CG 321 Supply and fix 1100 Volts grade heavy duty flat weather proof twin core cable of size 10 Sqmm with multistrand aluminium conductor including taking down of old one complete all as directed and specified. Make: Plaza/Polycab/ Finolex/ Havells 322 Material and labour in repair for 3 ½ core 25 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make : Havells/ Polycab/ RPG Asian 323 Material and labour in repair formaking straight through joint with suitablejointing kit consisting of water proof adhesivesfor UG cable of size 3.50 core 16 Sqmm to 25 Sqmm, complete all as specified and directed. 324 Servicing/ Periodical maintenance of following capacity DG Set of any make consisting of complete servicing and checking entire system as per manufacturers catalogue including testing complete with replacing of minorconsumables itemslike grease, nut bolts etc during conducting periodic servicing as per the manufacturers recommendation at the time of routine monthly checks. Capacity 20KVA DG Set - Location:-street lights CQAE Area - 01 No Maintenance Schedule of DG Sets :- The contractor shall carried out following activity during ofthe period of contract :- 325 (a)Daily maintenance of DG Sets to be carried out :- 326 (i) Clean the external surface of the DG set. 327 (ii)Check engine oil level. 328 (iii) Check engine coolant level. 329 (iv) Check fuel in the tank. 330 (v)Check all nuts and bolts. 331 (vi) Check tension of fan belts. 332 (vii) Check batteries and battery connections. 333 (viii)Check fuel lines and fuel tank. 334 (b)Weekly maintenance of AMF Panels :- 335 (i) Checking all electrical connections. 336 (ii)Checking all contact points/ Bus bars. 337 (iii) Checking timers (AC/ DC). 338 (iv) Checking all selector switches (voltmeter and Ammeter). 339 (v)Check RPM, Voltage, Amps and Hz. 340 (vi) Checking indicator lamps. 341 (vii) Checking main auxiliary contacts and relays. 342 (viii)Checking contact coils. 343 (ix)Checking, volt/ amps/ energy/ PF/ KWH meters/ CTs. 344 (x) Checking auto/ manual functions. 345 (xi)Check and tight screws and bolts. 346 (xii)Check battery charger output voltage. 347 (xiii) Cleaning the panel. 348 (xiv) Checking all MCCBs and fuses. 349 (xv) Checking alarms and hooter. 350 (c) Monthly maintenance of DG Sets to be carried out :- 351 (i)Check oil bath cleaner oil level. 352 (ii) Check for proper tension in the belts. 353 (iii) Check starting battery electrolyte level and specific gravity. 354 (iv) Check the fuel lines from the tank for leakages. 355 (v) Check the end cover of the alternator and tighten the bolts. 356 (vi) Check physically the exhaust silencer for rigidness. 357 (vii) Check the water hoses for leakages if any. 358 (viii) Drain sediment from fuel filter & fuel tank. 359 (ix) Check dry type air filter element and clean. 360 (x) Check engine alternator coupling and mounting bolts. 361 (xi) Tight all bolts and nuts in alternator terminal box. 362 (xii)Check for any unusual sound during cranking of the engine. 363 (xiii)Check for any fuel/ water leakages. 364 (xiv)Check for any unusual vibrations. 365 (xv)Check proper charging of battery. 366 (xvi)Check exhaust system for any leakages. 367 (xvii) Check for proper circulation of coolant/ cooling of engine. 368 (xviii) Check physically the exhaust silencer for rigidness. 369 (xix) Check throttles linkage. 370 (xx) Checking to electric control panel throttle linkage. 371 (xxi) Supply and greasing to all bearing & movable parts. 372 (d)Quaterly Schedule to be carried out :- 373 (i)Checking of hydraulic governor oil level and toping up level. 374 (ii) Clean the crank case breather. 375 (iii)Check battery charging system & topping up electrolyte and maintenance of specific gravity. 376 (iv) Checking electric connection & generator control panel. 377 (v) Greasing to all bearing and movable parts. 378 Note :- The unitrate quoted is deemed to be inclusive of the followings :- 379 (a)DG Sets are placed at various locations of CQAE (WE). Therefore,the bidders areadvised to visit the location of DG Sets before quoting the tender. 380 (b)Servicing/ repair of DG Set shall be carried out by authorised dealer/ agency of manufacturer as approved by Engineer-in-Charge and where service/ repair is being carried out at site shall be under the expert supervision of authorised service agent. 381 (c) The make of DG sets are Kirloskar/ Greaves Cotton 382 (d)Filling of DHPP (N) in all mentioned DG Sets at various locations will be the responsibility of the contractor. However, DHPP (N) will be issued by MES. The amount for filling of DHPP (N) in DG sets is deemed to be inclusive in unit quoted rate. 383 (e) DHPP (N) required at the time of maintenance/ testing will be issued by MES. 384 (f)Representative of contractor shall maintain & update the maintenance/ breakdown register regularly and same will be checked by Engineer-in-Charge periodically. 385 (g)The monthly check shall be done once in a month but whenever breakdown occurs in DG set, the contractor has to attend all complaint unlimitedly through authorised service agent of the equipment/ machinery. 386 (h)The unit rate is deemed to be included for Cleaning of the surrounding area of DG set 5 mtr from plinth protection ofE/M installations includingremoving of accumulated earthof any width and depth upto 15cm cleaning / Cutting the grass with hand operated petrol/ kerosene driven grass cutting machine andremoving thegrass waste to outside MD land. 387 (j)In case of minor defect, entire Job shall be completed within 06 hrs from the time of registration of complaint, failing which penalty charges @ Rs. 500/- per hours shall be recovered. 388 (k)In case of major defect, the period for attending of complaint shall be decided by the GE/EIC by accessing extent of repair required through joint inspectionby Engineer-in-Charge and authorised service agent of the equipment at the site. If complaint is not rectified within the stipulated period and the GE is not satisfied with the reason for delay, then penalty at the rate of Rs. 600/- per hours shall be deducted from the dues of the contractor. 389 (l)Please note that above penalty is exclusively other than the condition 67 of IAFW - 2249 and shall be treated as interim condition of the contract and shall be enforce above as and when delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Deptt. 390 (m) The decision of the Accepting Officer in this regard shall be final and binding. 391 (n)The contractor shall be responsible to maintain the DG set in serviceable condition for entire contract period. 392 Description all as per Sl Item No 324 here in before but for Capacity 40KVA DG Set- Location:-Pump House-1 No 393 Description all as per Sl Item No 324 here in before but for capacity125 KVA DG set Location:-Tech building :- 1 No 394 Description all as per Sl Item No 324 here in before but for capacity 250 KVA DG set Location:-Tech building :- 1 No 395 Dismantling/ taking down complete radiator assembly of 20 KVA to 40 KVA DG Set and transportation to authorised workshop for following repairs :-(a) Opening the radiator assembly with brazing/ welding for repair/ service.(b)Cleaning of all water tube with diluted solution of HCL and cleaning with water pressure and removing the sludge and dust from inside the tank by flushing out.(c)Determining the leak/ puncher in radiator tubes.(d)Repair of fins by soldering/ brazing.(e)Repair of bottom brass water tank by soldering/ brazing.(f) Repair of radiator hose assembly.(g)Fixing the complete radiator assembly to its original position and testing complete all as specified and directed by Engineer-in-Charge. 396 Dismantling/ taking down complete radiator assembly of 125 KVADG Set and transportation to authorised workshop for following repairs :-(a) Opening the radiator assembly with brazing/ welding for repair/ service.(b)Cleaning of all water tube with diluted solution of HCL and cleaning with water pressure and removing the sludge and dust from inside the tank by flushing out.(c)Determining the leak/ puncher in radiator tubes.(d)Repair of fins by soldering/ brazing.(e)Repair of bottom brass water tank by soldering/ brazing.(f) Repair of radiator hose assembly.(g)Fixing the complete radiator assembly to its original position and testing complete all as specified and directed by Engineer-in-Charge. 397 Taking down old unserviceable self motorof capacity 20 KVA to 40 KVAand carrying to authorised work shop for servicing includingreplacment of unserviceable spare parts Brush, holder, solonoid switch, armature bush, filed coil complete and refixing, testing complete all as specified and directed. 398 Taking down old unserviceable self motorof capacity 125 KVAand carrying to authorised work shop for servicing includingreplacment of unserviceable spare parts Brush, holder, solonoid switch, armature bush, filed coil complete and refixing, Testingcomplete all as specified and directed. 399 Removing and replacing the old unserviceable one with new AVR (Automatic Voltage Regulator) suitable for Kirloskar curve of capacity 20 to 40KVA having input voltage 2 phase + neutral sensing voltage 415 output voltage 95V DC, output current 4A DC voltage regulation +/- 1 % average volts, over excitation current tripping, fuse protection 4A, fast acting and frequency 50 Hzcomplete all as specified and directed. 400 Removing and replacing the old unserviceable AVR (Automatic Voltage Regulator) suitable for capacity 125KVA having input voltage 2 phase + neutral sensing voltage 415 output voltage 95V DC, output current 4A DC voltage regulation +/- 1 % average volts, over excitation current tripping, fuse protection 4A, fast acting and frequency 50 Hzcomplete all as specified and directed. 401 Taking down 12/ 24 volts self starter assembly from DG set and transporting to its authorised workshop for repair/ servicing by replacement of defective spare parts such as carbon brush, carbon ring, bearing, bush, defectine wiring, winding and soldering after repair including testing after repair/ service and re-installation in original position for satisfactory functioncomplete all as specified and directed. 402 Supply and fixingin replacement self starter 12 Volts of DG Sets complete all as specified and directed. 403 Supply and fixingin replacement battery cable assembly (-ve & +ve) complete all as specified and directed.Note :- Items like clamp, lugs, nut, bolts and copper cable of size 25 sqmm upto 1 mtr required for connection is deemed to be inclusive in unit rate quoted. 404 Supply and fixingin replacement maintenance free lead acid sealed battery (SMF) 12 volts 90 AH complete all as specified and as directed.Make : EXIDE. / Amaron/ Amar RajaNote :-Old battery shall be deposited in MES store yard. 405 Supply and fixingin replacement maintenance free lead acid sealed battery (SMF) 12 volts 180 AH complete all as specified and as directed.Make : EXIDE. / Amaron/ Amar RajaNote :-Old battery shall be deposited in MES store yard. 406 Material and labourOpening disconnecting LT Cable connections with care from Auto-Main Failure Panel and checking throughly with Fault Detector Instrument at Site and replacement of Minor Defective Parts as required at Site suitable for 20 KVA to 40 KVA DG Setcomplete all as specified and as directed. 407 Material and labourOpening disconnecting LT Cable connections with care from Auto-Main Failure Panel and checking throughly with Fault Detector Instrument at Site and replacement of Minor Defective Parts as required at Site suitable for 125 KVA DG Setcomplete all as specified and as directed. 408 Supply and fix in replacement of selectorswitch 16 A 2 pole 2 way complete all as specified and as directed. 409 Supply and fix in replacement of selectorswitch 16 A 3 pole 3 way complete all as specified and as directed. 410 Supply and fix in replacement of RPM meter assembly complete set including rubber gasket, wire as per sample complete all as specified and as directed. 411 Supply and fix in replacement of add-on auxilury contactorblock 2No-2NC complete all as specified and as directed. 412 Supply and fix in replacement of electronictimer delay of range12 sec to 120 sec operational in 240V AC supply complete all as specified and directed. Make:- Selectron or equivalent 413 Supply and fixingin replacement of Relay for control contactor AC control std. Coil Voltage - 24, 110, 240, 415V 50HZ (2 NO + 2 NC) complete all as specified and directed. Make L& T / BCH/ ABB 414 Supply and fixing in replacement indicator lamp RYB complete all as specified and as directed. 415 Supply and fix in replacement of push button for Start/Stop switch allas per sample complete all as specified and as directed. 416 Supply and fix in replacement of Relay for single phase preventor 6 wire suitable for all mode operation all as directed. 417 Supply and fix in replacement ofelectronic Oil pressure sensor complete with wiring, connectors, bottle thimble all as directed 418 Supply and fix in replacement of 12V/24V 11 pin PLA relay with base all as specified and as directed. 419 Supply and fix in replacement of radiator hose of any capacity complete all as specified and directed. 420 Supply and fix in replacement of oil drain hose set complete all as specified and as directed. 421 Supply and fix in replacement of fuelhose set nylon type of any capacity complete all as specified and directed. 422 Material and labourfor replacement of door hinges of Acoustic enclosureheavy duty metal type for Left/Right side complete all as specified and directed. 423 Supply and fixingMCCB 200A, 36 KA, 4 Pole, 415V including taking down unserviceable one, complete all as specified and as directed. Make - L &T/Havells/Indoasian 424 Supply andfix in replacement of water pump assembly of water cooling system of DG set any capacity complete all as specified and directed. 425 Supply and fix in replacement of electronic water temp gauge sensor double pin in byepass complete with wiring, connectors, bottle thimble complete all as specified and directed. 426 Supply and fix in replacement of radiatorfan belt suitable for any capacity DG set complete all as specified and as directed. 427 Material and labourfor distilled water in 5 ltr/ 2 ltr capacity sealed cane to be filled in batteries complete all as specified and directed. 428 Material and labourof electrolyte for battarycomplete all as specified and directed. 429 Supply and fixingMCCB 63A, 16 KA, 4 Pole, 415V including taking down unserviceable one, complete all as specified and as directed. Make - L &T/Havells/Indoasian 430 Supply and fixingin replacement stop solenoid assembly 12V/ 24V DC for micro pump (two coil) heavy duty electrical control make energise to stop of DG Setscomplete all as specified and directed.Make :- Kirloskar or existingbrand of defective components or any reputed suitable make as approved by GE 431 Disconnecting the existing battery of capacity 12V 90 to 180 AH from the DG set, taking it to battery workshop, draining out the complete unserviceable electrolyte acid from the battery, filling up with new Electrolyte acid to the required level, charging the battery, testing the battery for correct specific gravity, bringing back to the location, connecting to DG set, start the engine for satisfactory function all as directed by Engineer-in-charge. 432 Supply and fixing in replacement of brass terminal suitable for 12 Volts, 90/180 AHbattery complete all as specified & directed. 433 Supply and fixingBattery charging alternator assembly 12 Volts of DG Sets complete including taking down existing one complete all as specified & directed. 434 Material and labourRepairs to 12V battery charging alternator assembly by removing, dismantling, replacing the unserviceable burnt rotor and stator assembly completly including insulation sleeves and refixing to the engine and testing to the satisfaction of DC volts & Ampsby charging of battery complete all as specified & directed. 435 Supply and fix in replacement of lubrication oil filter element with O ring of Make MICO / Kirloskar / Mahle/ Cummins as required at site for 20KVA capacities of DG Sets complete all as specified and as directed. 436 Supply and fix in replacement of lubrication oil filter element with O ring of Make MICO / Kirloskar / Mahle/ Cummins as required at site for 40KVA capacities of DG Sets complete all as specified and as directed. 437 Supply and fix in replacement of lubrication oil filter element with O ring of Make MICO / Kirloskar / Mahle/ Cummins as required at site for 125KVA capacities of DG Sets complete all as specified and as directed. 438 Supply and fix in replacement of lubrication oil filter element with O ring of Make MICO / Kirloskar / Mahle/ Cummins as required at site for 250 KVA capacities of DG Sets complete all as specified and as directed. 439 Supply and fixingin repairs earth Fault relay complete all as specified and directed. 440 Supply and fix in replacement of turbo cooler rubber hose of any capacity complete all as specified and as directed. 441 Material and labourfor lubrication oil SAE 15 W - 40grade API CI 4 plustype in sealed container for DG set Top up and change the oil in the sump after completely flushing the old oil from the tank/sump and cleaning of the same complete all as specified and as directed. (Make :Castrol/Valvoline/Servo) 442 Supply and fix in replacement of oil seal assembly of any capacity as per sample complete all as specified and directed. 443 Material and labour for 3 ½ core 70 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole complete including taking down unserviceable one all as specified and directed. Make : Havells/Polycab/ RPG Asian 444 Material and labour for 3 ½ core 95 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole complete including taking down unserviceable one all as specified and directed. Make : Havells, Polycab, RPG Asian 445 Material and labour in repair formaking straight through joint with suitablejointing kit consisting of water proof adhesivesfor UG cable of size 3.50 core 70 Sqmm to 95 Sqmm, complete all as specified and directed. 446 Material and labour forBoring of holes under road, pavement hard standings by trenchless technology using ultra sound technique and necessary machine including HDPE pipes upto 100 mm dia suitable for 0.4 Mpa working pressure, complete all as specified and directed. 447 Disconnecting of burnt/ damaged cables from panels/ junction boxes etc, cutting out the burnt out ends, making new end joints by supply and fixing new aluminium lugs/ insulation tape etc and reconnecting using new nuts/ bolts/ washer etc and restoring three phase and neutral in the junction box, complete all as specified and as directed for thecable sizefrom 70 Sqmmto 95 Sqmm 3.5 core of underground LT armoured cables.Note :- Earth work required for extending the incoming/ outgoing cable in junction box/ panel board etc shall deemed to be included in the unit rate quoted. 448 Supply, installation, commissioning and testing of factory assembled, floor mounted, free standing type tested LT Feeder pillar panels, with canopy, as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycarbonate, should be weather/vermin proof, anti -acid, anti-corrossive, UV resistance in accordance with IEC 61439-1, fire retardant and self extingushing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accordance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties, RoHS compliant & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thremoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosure should be minimum 200mm for air circulation & to minimize temp rise. Panel should be fitted with one No.polycarbonate IP 65, 9 W LED translucent bulk head luminaire color temp not less than 6500K, PF >0.95 under canopy for easy maintenance. Panel should be fitted outside with one No. of 16 A 3 Pole IP65 industrial socket and 01 No. of 32A 5P IP 65 industrial socket. 3 Phase and neutral 400 Amp current carrying capacity of Aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate for bedding upto a height of 45 CM above ground level, including dismanting and taking out U/s LT panel board and reconnecting existing LT UG Cable with new panel board all as directed :- 449 (a) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 250 Amp, 36 KA- 01 No (Incomer). (b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity100 Amp,16 KA- 02 Nos.(c) MCCB with thermal magnetic release 4 Pole, 415 V of capacity63 Amp,16 KA- 02 Nos.(d) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No(e) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set.(f) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(iv) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 450 Supply, installation, commissioning and testing of factory assembled, floor mounted, free standing type tested LT Feeder pillar panels, with canopy, as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycarbonate, should be weather/vermin proof, anti -acid, anti-corrossive, UV resistance in accordance with IEC 61439-1, fire retardant and self extingushing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accordance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties, RoHS compliant & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thremoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosure should be minimum 200mm for air circulation & to minimize temp rise. Panel should be fitted with one No.polycarbonate IP 65, 9 W LED translucent bulk head luminaire color temp not less than 6500K, PF >0.95 under canopy for easy maintenance. Panel should be fitted outside with one No. of 16 A 3 Pole IP65 industrial socket and 01 No. of 32A 5P IP 65 industrial socket. 3 Phase and neutral 400 Amp current carrying capacity of Aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate for bedding upto a height of 45 CM above ground level, including dismanting and taking out U/s LT panel board and reconnecting existing LT UG Cable with new panel board all as directed :- 451 (a) MCCB with thermal magnetic release 4 Pole ,415 V of capacity 250 Amps ,36 KA- 01 No (Incomer).(b) MCCB with thermal magnetic release 4 Pole ,415 V of capacity 63 Amps ,10 KA- 04 Nos.(c ) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No.(d) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set.(e) Space for spare feeder -01 No.Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(iv) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 452 Material and labourreplacement of existing unserviceable door lock arrangement to DG set canopywith new door lock & key etc as per existing size & type complete all as specified & directed. 453 Supply and fix in replacement of electronic water temp gauge sensor single pin for engine block complete with wiring, connectors, bottle thimble complete all as specified and directed. 454 Supply and fixing in repairs door glass and beading for DG Set of any capacity complete all as specified and directed. 455 Supply and fixing in repairs 24V DC solenoid switch complete all as specified and directed. 456 Material and labourfor Urea which contain 32.5% urea and 67.5 % deionized water complete all as directed . 457 Supply and providing coolant concentrate in sealed container for top up complete all as specified and directed.Make : Valvoline/ Fleet guard/ Mahle 458 Supply and fix in replacement of electronic Fuel Level sensor complete with wiring, connectors, bottle thimble complete all as specified and directed. 459 Supply and fix in replacement of radiator mounting pad set of any size complete all as specified and directed. 460 Supply and Fix in replacement of temeprature guage of any capacity complete all as specified and as directed. 461 Supplyand Replacement of fuel filter element with O ring of Make MICO / Kirloskar / Mahle/ Ashok Leyland/ Cummins as required at site for 20 KVA capacities of DG Setsall as directed by Engineer-in-Charge. 462 Supplyand Replacement of fuel filter element with O ring of Make MICO / Kirloskar / Mahle/ Ashok Leyland/ Cummins as required at site for 40 KVA capacities of DG Setsall as directed by Engineer-in-Charge. 463 Supplyand Replacement of fuel filter element with O ring of Make MICO / Kirloskar / Mahle/ Ashok Leyland/ Cummins as required at site for 125 KVA capacities of DG Setsall as directed by Engineer-in-Charge. 464 Supplyand Replacement of fuel filter element with O ring of Make MICO / Kirloskar / Mahle/ Ashok Leyland/ Cummins as required at site for 250 KVA capacities of DG Setsall as directed by Engineer-in-Charge. 465 Supply and fixing in repairs mechanical type diesel float switch assembly complete all as specified and directed. 466 Supply and fixingin replacement Cooling Fansuitable for DG Set 125 KVA capacity, complete all as specified and as directed. 467 Supply and fixingin replacement Cooling Fansuitable for DG Set 20 to 40 KVA capacity, complete all as specified and as directed. 468 Supply and fix in replacement of flush type LED Digital multi functional meter withparameter (V,I,PF) suitable for DG set AMF panelcompleteof Model A class 1 complete all as specified & directed. 469 Supply and fixingin replacementcontactor 4 pole,with 1 NO + 1 NC aux contacts and coil voltage 240 V/415 volt suitable for AMF Panels of 125 KVADG Set complete all as specified and as directed. MAKE : L&T/BCH/Schneider 470 Supply and fixingin replacementcontactor 4 pole,with 1 NO + 1 NC aux contacts and coil voltage 240 V/415 volt suitable for AMF Panels of 40 KVADG Set complete all as specified and as directed. MAKE : L&T/BCH/Schneider 471 Supply and fixingin replacementcontactor 4 pole,with 1 NO + 1 NC aux contacts and coil voltage 240 V/415 volt suitable for AMF Panels of 20 KVADG Set complete all as specified and as directed. MAKE : L&T/BCH/Schneider 472 Disconnecting the electrical connection from AMF Panel, taking down DG set of cap 20 to 40KVA for major overhauling of engine and transportationto authorised workshop forreplacement of piston assembly complete-4 sets, exhaust valve, cyilinder liner, inlet and out let valves, sealing cap, copper washers,thermostat elements, spin of filter for lubrication oil, oil seal, valve tappet, gasket for cylinder head, bush for injector, gasket for exhuast manifold,joint for bearing housing, joint for delivery volute, turbo repair kit complete all as specified & directed. 473 Supply and fixing in repairs electronic type diesel float switch assembly complete all as specified and directed. 474 Supply and fix in replacment of valve door packing of any capacity complete all as specified and directed. 475 Supply and fix in replacement of Auto source transfer controller unitsuitable for DG set AMF panel of any capacity and as per existing Make complete all as specified and directed. 476 Supply and fixingin repairs change over switch 125 Amps capacity 4 pole 3 phase with enclosure complete all as specified and directed. Make-Legrand/ L&T / Indoasian 477 Supply and fixingin replacement microprocessor based AMF controller unit for AMF Panel flush mounting type suitable for DG Set 20 to 40 KVA capacity as per existing make complete all as specified and directed. 478 Supply and fixingin replacement microprocessor based AMF controller unit for AMF Panel flush mounting type suitable for DG Set 125 KVA capacity as per existing make complete all as specified and directed. 479 Supply and fix in replacement of Air filter elementinner and outer as required at site with O ring of Make MICO / Kirloskar / Mahle/ Cummins as required at site for 20 KVA capacities of DG Sets complete all as specified & directed. 480 Supply and fix in replacement of Air filter elementinner and outer as required at site with O ring of Make MICO / Kirloskar / Mahle/ Cummins as required at site for 40 KVA capacities of DG Sets complete all as specified & directed. 481 Supply and fix in replacement of Air filter elementinner and outer as required at site with O ring of Make MICO / Kirloskar / Mahle/ Cummins as required at site for 125 KVA capacities of DG Sets complete all as specified & directed. 482 Supply and fix in replacement of Air filter elementinner and outer as required at site with O ring of Make MICO / Kirloskar / Mahle/ Cummins as required at site for 250 KVA capacities of DG Sets complete all as specified & directed. 483 Supply and fixingin repairs change over switch 63 Amps capacity 4 pole 3 phase with enclosure complete all as specified and directed. Make-Legrand/ L&T / Indoasian 484 Supply and fixingin replacement ofwiring of AMF panel of capacity DG set including copper wire ,PVCwire holder and other connected items suitable for DG Set 20 to 40 KVA capacity as per existing make complete all as specified and directed. 485 Supply and fixingin replacement of Fly wheel ringincluding nuts and bolt suitable for DG Set 20 to 40 KVA capacity as per existing make complete all as specified and directed. 486 Supply and fixingin replacement of Fly wheel ringincluding nuts and bolt suitable for DG Set125 KVA capacity as per existing make complete all as specified and directed. 487 Surface dressing in hard / dense soilnot exceeding 15 cm deepand clearing all the grass weeds etc in the sub station yards after removing stone aggregate asideall as directed at site including setting / spreading back the aggregate complete all as specified and directed at site.Note:- (i)Additional stone aggregate required shall be measured and paid separately under relevant items of this schedule.(ii)The rate also deemed to be included for labour (iii) The sub station yards shall be kept cleanthrough out the contract period by removing the grass/weeds as many as times required depending on the growth of the grass. (iv)The rates shall be deemed to includesthe cost of removing two time the grass,weeds,debris,excess soil etc to a distance not less than 50 M and keeping the excavated surface clean and levelled all as directed. 488 Supply and laying of GI pipe light grade for cable protection of size 80 mm bore complete with fitting completeincluding taking down unserviceable one all as inspecified and directed. 489 Material and labour for 3 ½ core 185 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheather laying in trenches/cable ducts, fixed to wall/pole complete including taking down unserviceable one all as specified and directed. Make : Havells/ Polycab/ RPG Asian 490 Disconnecting of burnt/ damaged cables from panels/ junction boxes etc, cutting out the burnt out ends, making new end joints by supply and fixing new aluminium lugs/ insulation tape etc and reconnecting using new nuts/ bolts/ washer etc and restoring three phase and neutral in the junction box, complete all as specified and as directed for thecable sizefrom 150 Sqmmto 185 Sqmm 3.5 core of underground LT armoured cables.Note :- Earth work required for extending the incoming/ outgoing cable in junction box/ panel board etc shall deemed to be included in the unit rate quoted. 491 Supply, installation,commissioning and testing of factory assembled ,floor mounted ,free standing type tested LT Feeder pillar panels,with canopy ,as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycrabonate,should be weather vermin proof, anti -acid,anti-corrossive,UV resistance in accordance with IEC 61439-1,fire retardant and self extingushing in accordance with IEC 60695-2-11 ,UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accordance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties ,RoHS compliants & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tight to base with thermoplastic screw having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosuser should be above 200mm for air circulation & to minimize temp rise. Panel shallbe fitted with one No. ofpolycarbonate IP 65 9 W LED transperent bulk head luminaire 6500K,PF >0.95 under canopy for easy maintenance . Panel should be fitted outside with one No. of 16 Amp 3 Pole IP65 industrial socket and 01 No. of 32 Amp 5P IP 65 industrial socket. 3 Phase and neutral 300 Amp current carrying capacity of aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20mm graded stone aggregate for bedding upto a height of 45 CM above ground level ,including dismanting and taking out old U/s LT panel board and reconnecting existing LT UG Cable with new panel board, complete all as specified and directed :- 492 (a) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 200 Amp, 36 KA- 01 No (Incomer).(b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 100 Amp, 10 KA- 01 No.(c) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 63 Amp, 25 KA- 01 No.(d) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No.(e) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set.(f) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(iv) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 493 Supply, installation,commissioning and testing of factory assembled ,floor mounted ,free standing type tested LT Feeder pillar panels,with canopy ,as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycrabonate,should be weather vermin proof, anti -acid,anti-corrossive,UV resistance in accordance with IEC 61439-1,fire retardant and self extingushing in accordance with IEC 60695-2-11 ,UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accordance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties ,RoHS compliants & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tight to base with thermoplastic screw having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosuser should be above 200mm for air circulation & to minimize temp rise. Panel shallbe fitted with one No. ofpolycarbonate IP 65 9 W LED transperent bulk head luminaire 6500K,PF >0.95 under canopy for easy maintenance . Panel should be fitted outside with one No. of 16 Amp 3 Pole IP65 industrial socket and 01 No. of 32 Amp 5P IP 65 industrial socket. 3 Phase and neutral 600 Amp current carrying capacity of aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20mm graded stone aggregate for bedding upto a height of 45 CM above ground level ,including dismanting and taking out old U/s LT panel board and reconnecting existing LT UG Cable with new panel board, complete all as specified and directed :- 494 (a) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 400 Amps, 36 KA- 01 No (Incomer).(b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 200 Amps, 25 KA- 03 Nos.(c) MCCB with thermal magnetic release 4 Pole ,415 V of capacity 100 Amps, 10 KA- 02 Nos.(d) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No.(e) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set.(f) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(iv) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 495 Material andlabour forTesting of earth resistancevalue from earthing pit test terminal pointand write in/ on existingidentification board complete all as specified and as directed.Around upto 1.50 Metre Area of existing Earth Pit with tightening of Strip comprising of the following process :- 496 The following items are deemed to be inclusive of quoted rate :-(i)The above job shall be carried out by a trained technician having ITI in electrical and well known regarding earthing test. Documantary proof of the education of tradesman shall be produced by the contractor to the Engr-in-charge, before commencement of work. 497 (ii)The aforsesaid test shall be carried out in presence of user and MES represnetative. 498 (iii) Two Party (consisting 2 x 1 No. Technician with 1 No. Helper) shallreport every Morningat 9 AM to JE E/M for Daily earth testing. 499 (iv) Earth Resistance Tester will be provided by the Contractor. (Tester should be caliberated from Authorised Company/ Lab). 500 (v) Contractor shall be responsible for pouring of water in the Earth Pits Weekly at their own arrangement with Water Tanker, etc. (water will be provided by the contractor at his own arrangement and nothing extra will be admissible). 501 (vi) Contractor shall be responsible for marking of Earth check date and due date on existing Plate with synthetic enamel paint as specified by Engineer-in-Charge. 502 (vii)Contractor shall be responsible for cleaning of bushes and grass all around upto 1.50 Metre Area of existing Earth Pit with tightening of Strip. 503 Supply only charcoal dust/Breeze in trenches to improve the ER value of existing earth pits, complete all as specified and as directed. 504 Supply only common salt commercial in trenches to improve the ER value of existing earth pits, complete all as specified and as directed. 505 Material and labour for magnesium sulphate (MgSO4) for improvement of earthing resistivity, complete all as specified and directed. 506 Material and labour for Powder Earthing Backfill Compound, Grade Standard for improvement of earthing resistivity and to increase the absorption of moisture around the earthing electrode, complete all as specified and directed. 507 Supply and fixing in repair 20 mm bore galvanised steel water tubing medium grade with all fitting fixed to wall and ceiling or laid in floors etc, complete all as specified and directed. 508 Supply and fixing in repair 40 mm bore galvanised steel water tubing medium grade with all fitting laid in trenches/or laid in floor etc, complete all as specified and directed . 509 Supply and Fix in repairs Bib Tap of 15 mm dia standard of PTMT any colour high pressure screwed for iron pipe(Minimum weight 90 gms ), complete all as specifed and directed. 510 Taking downn unsv funnel of any type and size Supply and fixing in repair GI funnels for earthing, complete all as specified and as directed. 511 Taking down existing GI earthstrip 25x3mm thick as earthing lead with its accessories and re fixing to wall/roofs etc. drawn in conduit/GI pipe etccomplete all as specified and as directed.Note:- Unit rate is deemed to be included for old broken insulators/ clamps to replace with new insulators of existing size as per site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed. 512 Supply and fixing in replacement of aluminium strip 25x3mm fixed with epoxy based insulator for down conductor air terminal network including drilling two Nos holes at each joint, one set of lead washers between strips, two sets GI nut andbolt, gutties, screws etc,.on wall /roof including necessary fixing arrangement up to height 20mtrcomplete all as specified and directed.Note:- Unit rate is deemed to be included for old broken insulators/ clamps to replace with new insulators of existing size as per site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed.(ii) All safety measures shall be the responsibility of the contractor 513 Taking down of serviceable aluminium strip 25x3mm and refixing the same with epoxy based insulator/post insulator/spacerfor down/ lightening conductor air terminal network including drilling two Nos holes at each joint, one set of lead washers between strips, two sets GI nut andbolt, gutties, screws etc.on wall /roof including necessary fixing arrangement up to height 20mtrcomplete all as specified and directed.Note:- Unit rate is deemed to be included for old broken insulators/ clamps to replace with new insulators of existing size as per site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed.(ii) All safety measures shall be the responsibility of the contractor 514 Supply and fixing in repair test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hexagonal. head screw, complete all as specified and directed. 515 Material and labourin repairs Galvanised iron Earth strip of size 32 x 6 mm fixed on proper post insulator at the instrument end complete all as per specified and as directed. 516 Repairing and maintenance of old existing earth pit by taking out carefully earth plate, watering pipe, earth lead protection pipe and re-buried the same after removing sludge from the plate & pipes including re-connection/brazing the plate and strip, wherever is required at site (Earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 metres below normal ground level,complete all as specified and directed includingPCC 1:3:6 type C1 using 20mm graded stone aggregate for pit with cover of RCC 1:2:4 type B1 using 20mm graded aggregate, reinforced with welded steel wire fabric not less than 4 kg per Sqmtr with handle and angle iron frame,watering arrangment with 20 mm bore GI medium grade pipe ISI marked, GI funnel with GI mesh,filling with mixture of common salt and charcoal,necessary excavation, refilling, removing away soil and earth work in any type of soil including test point, testing and commissioning, complete all as specifed and as directed.Note : GI Funnel, brazing, mixture of salt/char coal/MgSO4 shall be measured and paid separately under releavant items. 517 S&F in repair copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc including taking down existing old unserviceable copper strip etc, complete all as specified anddirected. Note : - All Joints should be joined by Exothermic Welding or Brazing. 518 Material and labour for Brazing of copper/Aluminium for continuity, complete all as specified and as directed. 519 Supply and fix in repair of wall mounted fans PVC body 230 Voltssingle phase oscillating 400mm sweep suitable for wall mounting all as specified and directed. Make : Havells/Bajaj/ Orient.Note:-(a)Old Unserviceable ceiling fan shall be deposited to MES store yard. 520 Material and labour for fixing earth indicators made out of 3 mm thick MS sheet of size 200mm x 300mm duly fixed in MS angle iron 25mmx25mmx3mm of 450 mm long to be fixed to ground by means withnecessarycement concrete andpainting with two coats of synthetic enamel paint over a coat of red oxide primer, writing earth reading and connected items like painting of panel etc, and necessary excavation and earth work including taking down old, complete all as specified and as directed. 521 Supply, installation, testing & commissioning of maintenance free chemicalearthing system comprising of 17mm dia copper bondedrod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducingliquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation including taking down existing one, complete all as specified and directed..Make : Model HTSP 317 of safeTrode or equivalent in Snaga/ Cubes 6 Global 522 The quoted rate shall also deemed to be included the following :- (i)Prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of Engr-in- Charge/JE (E/M),user and the report has tosubmitto Garrison Engineer with recommendation of manufacturer, if required additional interconnection ofearthing (not more than 08 number of earthing) to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testingandsubmission of report with recommendationdeemed to be included in the quoted rate. 523 (ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors. 524 (iii) Rateofearth energizer compound of 25 Kg of 02 bags and earthresistance reducingliquid 10 litre per cane for each pit deemed to be included in the quoted rate. 525 (iv)Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor along with the sample approval 526 (v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH value should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete. 527 (vi) Copper strip of size 20 x 3 mm shallbe fixed on proper post insulator at the instrument end (copper strip upto 7.5 RM shall be considered in unit quoted rate and extra will be measured and paid separately). 528 (vii)Testing of earth shall be carriedout in presence ofdepartmental and user representativeand report shall be submitted to Garrison Engineer duly signed by all concerned. 529 (viii)Earth resistance tester will be provided by the contractor.Tester should be calibrated from authorised company/ lab. 530 (ix)Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintained duly signed by all concerned.After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained. 531 (x) The contractor shall give a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion. 532 (xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock. 533 (xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is maintained. 534 (xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing for each earthing shall be retained from payment due to the contractor from final bill for the guarantee period. 535 (xiv) The electrode shallcarry manufacturers name . 536 (xv) The connection clamp shall be permanentlly welded to the copper boundedrodto avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination. 537 (xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm. 538 (xvii)Earth work such as auguring andmaking good the surrounding area shall carried out in any type of soil. 539 (xviii)The contractor shall submit CPRI India certified document for copper bounded rod to ensure genuineness of material. 540 (xix) Sign boardof mild steel sheet 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxideZinc chrome primer showing result of earthing shall be fixed near the earth pit after completion as directed by engr -in- charge. 541 Material and labour for Earth pit cover madeof heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 7.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mm for each electrode pit complete including taking down old one complete all as specified and directed.Make : Model SEPC 250 of SAFE TRODE or equivalent in Snaga/ Cubes 6 Global 542 Supply, installation, commissioning and testing of factory assembled, floor mounted, free standing type tested LT Feeder pillar panel, with canopy, as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycarbonate, should be weather/vermin proof, anti -acid, anti-corrossive, UV resistance in accordance with IEC 61439-1, fire retardant and self extingushing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accordance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties, RoHS compliants & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thermoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosure should be minimum 200mm for air circulation & to minimize temp rise. Panel should be fitted with one No.polycarbonate IP 65, 9 W LED translucent bulk head luminaire color lamp not less than 6500K, PF >0.95 under canopy for easy maintenance. Panel shall be fitted outside with one No of 16 Amp 3 Pole IP65 industrial socket and 01 No. of 32Amp 5P IP 65 industrial socket. 3 Phase and neutral 630 Amp current carrying capacity of aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20mm graded aggregate forbedding upto a height of 45 CM above ground level, including dismanting and taking out old U/s LT panel board and reconnecting existing LT UG Cable with new panel board amplete all as specified and all as directed and comprising of the following:- 543 (a) ON load change over switch 4 Pole, 415 V of capacity 400 Amp, 36 KA - 01 No . (b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity400 Amp,36 KA- 02 Nos.(c) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No(d) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set. (e) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(vi) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 544 Supply, installation, commissioning and testing of factory assembled, floor mounted, free standing type tested LT Feeder pillar panels, with canopy, as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycarbonate, should be weather/vermin proof, anti -acid, anti-corrossive, UV resistance in accordance with IEC 61439-1, fire retardant and self extingushing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accordance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties, RoHS compliant & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thremoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosure should be minimum 200mm for air circulation & to minimize temp rise. Panel should be fitted with one No.polycarbonate IP 65, 9 W LED translucent bulk head luminaire color temp not less than 6500K, PF >0.95 under canopy for easy maintenance. Panel should be fitted outside with one No. of 16 A 3 Pole IP65 industrial socket and 01 No. of 32A 5P IP 65 industrial socket. 3 Phase and neutral 600 Amp current carrying capacity of Aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate for bedding upto a height of 45 CM above ground level, including dismanting and taking out U/s LT panel board and reconnecting existing LT UG Cable with new panel board all as directed :- 545 (a) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 400 Amps36 KA- 01 No.(Incomer).(b) Change over switch 400A, 4P front operated - 01 No.(c) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 160 Amps25 KA- 02 Nos (O/G).(d) MCCB with thermal magnetic release 4 Pole, 415 V of capacity125 Amps 25 KA- 02 Nos (O/G).(e) MCCB with thermal magnetic release 4 Pole, 415 V of capacity100 Amps 10 KA- 01 No (O/G)(f) MCCB with thermal magnetic release 4 Pole, 415 V of capacity63 Amps 10 KA- 01 No (O/G)(g) MCB SPNof 240 V of capacity 40 Amps 10 KA- 01 No.(h) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No.(j) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set.(k) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(iv) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 546 Note :- An amount of Rs 2,49,138.00 on account of credit schedule for schedule A part II shall be deducted from the total amount of BOQ to arrive at the contract sum.
Contract Date: Oct 16, 2025 Contract Value : ₹ 1.43 Crore
Statutory Bodies & Commissions/Committees No of Bidders 11
Karnataka View Result →
25.
Defence #8124169 AOC
Tender For Repair/Maintenance Of Ht Protection And Control System, Ht Distribution Network At Mathura Under Ge (East) Mathura.; 1 Disconnecting & taking out33KV HT VCB/SF6 Breaker of any description and any make of rating 400/630/1200Amp, dismantling / opening of the VCB for preventive maintenance / servicing / overhauling, taking out and removing unserviceable / defective parts includingcleaning & servicing, greasing, oiling of the parts etc and renewal of unserviceable parts with new one, re-assembling the VCB after overhauling / servicing and its testing complete and renewal of following unserviceable spare parts of make as approved by GE complete all as specified and directed.Notes :- (i) The quoted rate of contractor includes for fixing the serviceable parts in position and renewal of unserviceable parts with new parts.(ii) The new parts shall be measured and paid separately under appropriate item as supply only mentioned here-in-after(iii) Servicing to be carried out by service engineer of OEM. 2 Supply only Shunt trip coil 24-30 Volts DC suitable for 33KV VCB 3 Supply only Switch TNC (trip, neutral, close) 4 Supply and fixing after disconnected of electric supply to VCB and replace the unserviceable Over current and earth fault protection relay, Vx=24 -240 V AC/24-250 V DC,In=1A/5A(0,1In-40In), Ion=1 A/5A(0,01Ion-2Lon) complete all as specified and directed. Make:-Cat part No REL15002D Easergy P1 of Schneider/ABB/Siemes Note:- Fixing of protection relay shall be carried out through O.E.M of maanufacturers engineer/technician only . 5 Disconnecting & taking out11KV HT VCB of any description and any make of rating 400/630Amp, dismantling / opening of the VCB for preventive maintenance / servicing / overhauling, taking out and removing unserviceable / defective parts includingcleaning & servicing, greasing, oiling of the parts etc and renewal of unserviceable parts with new one, re-assembling the VCB after overhauling / servicing and its testing complete and renewal of following unserviceable spare parts of make as approved by GE complete all as specified and directed. Notes :- (i) The quoted rate of contractor includes for fixing the serviceable parts in position and renewal of unserviceable parts with new parts.(ii) The new parts shall be measured and paid separately under appropriate item as supply only mentioned here-in-after(iii) Servicing to be carried out by service engineer of OEM or authorised dealer 6 Supply only Vaccum bottle suitable for 630 Amp, 11KV HT VCB 7 Supply only Vaccum bottle suitable for 400 Amp, 11KV HT VCB 8 Supply only Fixed arcing contact assembly suitable for 630 Amp 11KV HT VCB 9 Supply only Moving arcing contact assembly suitable for 630 Amp 11KV HT VCB 10 Supply only Fixed arcing contact assembly suitable for 400 Amp 11KV HT VCB 11 Supply only Moving arcing contact assembly suitable for 400 Amp 11KV HT VCB 12 Supply only Shunt trip coil 24-30 Volts DC suitable for 11KV VCB 13 Supply only Spring charging motor 110-230 Volts AC 50 Hz suitable for 11KV VCB. 14 Supply only PVC spout assembly suitable for 11KV VCB/ Bus coupler 15 M&L for checking tripping of33/11KV circuit breakers through programming microprocessor based numerical relay/ IDMT over current and earth fault relays at plug setting intended in service by primary current injection in CT to ensure proper function of relays trip coil control circuit etc during fault condition complete all as specified and directed. 16 M&L for testing of over current & earth fault of programming microprocessor based numerical relay/ IDMT relays as pertime/currentcharacteristics by secondary injection test O/C 50%,75%, 100%, 200% & E/F20-80% plug setting and operating time at twicethe set valve &TMS 1 including well cleaning and de-carbonizing ofrelay contacts complete all as specified and directed. 17 Supplying, laying, testing and commissioning in repair, XLPE insulated, screened, PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor ISI marked 11 KV grade (Earthed system) laid in trenches / on pole / in ducts or through sleeves of size 95 Sqmm 3 core complete all as specified and directed. 18 All as per item 6.0 above but cross sectional area of size 120 Sqmm 3 core 19 All as per item 6.0 above but cross sectional area of size 150 Sqmm 3 core 20 All as per item 6.0 above but cross sectional area of size 185 Sqmm 3 core 21 Material and labour for taking out HT underground cable of any size or type from excavated trenches, repairing the same as required at site and relaying the cable after repair at same or another locationcomplete all as specified and directed..Note (i)- Necessary excavation, earthwork, jointing materials will be measured and paid separately under relevant items of schedule. 22 Dismantling steel tubular poles of any size complete all as specified and directed. 23 Supply and erecting steel tubular swaged pole with cast iron base plate, finial taper plug, bolts, nuts & washers as per IS 2713 (Part-II) 1980 made out of mild steel tubing, type 410 SP-55 (11 metre long) including painting of poles with one coat of red oxide primer and two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) over exposed surface and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and directed. Note : Earth work and PCC shall be measured separately. 24 Excavation in trenches for laying under ground cable, erection of poles and stays in soft soil type not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out in soft / loose soil complete all as specified and directed. 25 Excavation in trenches for laying under ground cable, in PCC /Floor/Road/path etc not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out in hard / dense soilcomplete all as specified and directed. 26 Excavation in soft /loose soil in trenches not exceeding 1.5 mtr wide and exceeding 1.5 mtr in depth but not exceeding 3.0 mtr in depth and getting outgetting out in soft / loose soil complete all as specified and directed. 27 Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. 28 Removing surplus excavated material to a distance not exceeding 50 meter above the starting point complete all as specified and directed. 29 M&L for Sand cushioning to under ground cable in trenches/existing cable trenches/ductsin layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed.Note :- Measurement shall be taken after gentling puning of sand (i.e 18 cm) 30 Supplying and laying un-reinforced precast concrete cable cover class HV type 1 withsize 300 mm x 180 mm x 40 mm complete all as specified and directed. 31 M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 32 M&L for PCC 1:3:6 type C-2 using 40mm gradedcrushed stone aggregate as in foundation complete all as specified and directed. 33 Material & labour for Repair and maintanance of 11 KV HT RMU indoor/outdoor type, each wayof RMU 630 Amp rating,SF6 breaker 5 way (Make:- C&S) from HT Panel after switching off electric supply. Removal of all the possiblemechanical/electrical /control system for proper functioning e.g. spring charge system, triping system,indication system, includingchecking the quality of insulating material, complete & refixing with faulty part replacedblowing out dust and applying the proper lubrication/ greasing and reassembling theincluding motorised operation andconnection to HT panel & filling of gas (if quantity is lesser than required) and make the RMU functional to the entire satisfactionand as directed bytheEngineer-in-charge. Note:- (i) check the leakage of SF6 gas fro RMU andSF6 gas charging will be measured separetely. (ii) Repairing/servicing shall be carried out through O.E.M of manufactures engineering/technician. (iii) Cost of small spare parts like gasket,O ring,nuts,bolts and lubrication/cleaning required for servicing of RMU is deemded to be included in the quotated rate. However cost of the major spare parts will be measured and paid separetaly under relevent items of schA.(iii) Job of repairing/servicing/calibrating/testing/setting of fault tripping and recommissioning has been considered for complete set of RMU as per location. 34 Supply only SF6 gas suitable for HT 11 KV RMU 35 Supply only saver mechanism ON/OFF operating complete with spring, fire stick, tripping coil system etc for RMU 36 Supply only actuator motor for operating mechanism charging motor ON/OFF for RMU and testing 37 Supply only self powered relay CG/14S suitable for RMU 38 Supply & testing of spring charging mechanism with motor for outdoor/indoor type, 11KV, RMU,operated on 230/110/24 voltsDC,with charging time less than 15 sec of approved rating complete all as specified and directed. 39 Material and labour for repairing /servicing of gang operating devices 11000 volts up to 400 Amps including cleaning, greasing all the moving parts and applying petroleum jelly at the contact points including dismantling and replacing all the unserviceable parts/ spares complete all as specified and directed.Note :- (i)The rate quoted against this item shall be deemed to include cost of petroleum jelly, renewal of worn out nuts, bolts & washers, binding wire and PG clamps etc complete as required for proper functioning of GOD switch.(ii)Cost of item required to be repalced for making GOD switch serviceable will be measured and paid under supply only under item No 23.01 & 23.02 here in after. 40 Supply only Moving contact blades copper alloy (Male contact). 41 Supply only Fixed contact jaw copper alloy (Female contact). 42 Dismantling unserviceable cross arms, clamps etc and removing from site complete all as specified and directed. 43 Material and labour for cross arms, bracings, supports, clamps, hooks and back plates fabricated from structural steel sections including nuts, bolts, washers welding, bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminum paint complete all as specified and directed. 44 Dismantling insulators any type/ size from HT network complete all as specified and directed. 45 Supply and fixing in repair ofpintype insulator suitable for 11 KV, procelain vitreous white, brown or green of size 150 mm height and 150 mm dia, ISI marked including one galvanised steel spindle, two galvanised iron washers and one galvanised iron nut complete all as specified and directed. 46 Supply and fixing in repair of post top insulator of 11 KV grade suitable for air break switch/ drop out fuse assy with necessary nuts, bolts, washers complete all as specified and directed. 47 Supply and fixing in replacement lightning arrestor expulsion type complete with all fittings, transmission class discharge capacity 65 KA, 11000 volts complete all as specified and directed. 48 M&L for repair/ Maint/ servicing of33/11KV/ 400Amp GOD AB switch to made it proper functional by oiling/ greesing of mechanical operating mechanism and renewal of old rusted nuts/ bolts/ MS clamps/ handle and provide jelly between fixed and moving contacts complete all as specified and directed. 49 M&L for replacement of female contact / fixed contact Jaw suitable for 33KV GOD AB switch of rating 400 Amp complete all as specified and directed. 50 M&L for replacement of male contact/ moving contactblade suitable for 33KV GOD AB switch of rating 400 Amp complete all as specified and directed. 51 M&L for replacement of tinned copper flexible jumper suitable for 33KV GOD AB switch of rating 400Amp complete all as specified and directed. 52 M&L for replacement of MS jumper carrier suitable for 33KV GOD AB switch of rating 400Amp complete all as specified and directed. 53 M&L for replacement of back connector plate suitable for 33KV GOD AB switch of rating 400Amp complete all as specified and directed. 54 M&L for replacement of PG clamps suitable for 33KV bus bar over head conductor complete all as specified and directed. 55 Material and labour for insulating mat for electrical installations, ISI marked of IS:15652 and of size 2 mtr x 1 mtr x 20 mm suitable for 11 KV system complete all as specified and directed. 56 Material and labour for HT cable route indicators made out of PCC 1:2:4 type B1 duly rendered with plaster 10 mm thick of size 40 cm x 60 cm x 20 cm fixed & erected on PCC platform of size 40 cm x 40 cm x 10 cm grouted in ground duly painted on both sides with HT cable Route complete all as specified and directed. 57 Supply and fixing in replacement Lead acid battery 12volt 140AH complete all as specified and directed. 58 Supply and fixing in replacement tubular battery 12 volt 150 AH complete all as specified and directed. 59 Fault location of underground HT cable of any size or type with help of cable fault locator machine at site including removal of moisture content from the cable complete all as specified and directed.Note :- The machine for fault location will be arranged by the contractor in the quoted rates. However, necessary excavation, earthwork, jointing materials will be measured and paid separately under relevant items of schedule. 60 Disconnecting and taking down HTcable from HT pole/ transformer and cutting faulty end portion of the cable, dressing properly and making good end termination, outdoor type with and including suitable size of heatshrinkable new jointing kit 11000 volts grade and aluminum lugs duly crimped with crimping tool for the following sizes of HT cables:- 61 95 Sqmm 3 core. 62 120 Sqmm to 185 Sqmm 3 core. 63 Disconnecting and taking down HTcable from HT pole/ transformer/VCB/RMU and cutting faulty end portion of the cable, dressing properly and making good end termination, Indoor type with and including suitable size of heatshrinkable new jointing kit 11000 volts grade and aluminum lugs duly crimped with crimping tool for the following sizes of HT cables:- 64 95 Sqmm 3 core. 65 120 Sqmm to 185 Sqmm 3 core. 66 Supply and jointing HT cable with jointing kit for 11 KV (Earthed) grade cable for straight through heat shrinkable type joint with jointing material and accessories suitable for 3 core XLPE armoured aluminum conductor cable of following sizes of HT cables compele all as specified and directed.Note:- Excavation and earth work shall be measured and paid separetely. 67 95 Sqmm 3 core. 68 120 Sqmm to 185 Sqmm 3 core. 69 M&L for Relaying of Cable cover retrieved from excavation during relaying of cable complete all as specified and directed. 70 Material & labour for GlowSchematic diagram on flex sheet (size approx 150cmx75cm) made up of retroreflective material (blue colour)of schematic diagram and writing the letters/diagram on sign board in white compele all as specified and directed. 71 M&L for painting of steel tubular HT pole 11 mtr including cross arms, clamps, back plates etc in situ with one under coat and one finishing coat of aluminum paint after cleaning/ preparation of surfaces including making yellow and black strips 30 cm wide 5 Nos with two coats of synthetic enamel paint compele all as specified and directed. 72 All as per item No 47 above but for 2 pole structure including bracings. 73 All as per item No 47 above but for 4 pole structure including bracings. 74 Supply and fixing in replacement first aid box containing all first aid medicine/ointment/bandage etc as per standard practicecomplete all as specified and directed. 75 Supply and fixing precautionery/educational Rollup Chart(Electric shock treatment/First aid chart etc) of approx size 95x65cm printed on pvc sheet/photografic paper pipe mounted , thread for wall hanging,water proofcompele all as specified and directed. 76 M&L for copper earthing in replacement with copper earth plate electrode 90 cm X 60 cm X 3.15 mm buried directly in ground (earth pit not less than 3.0 mtr deep beliow ground level) with top edge of the plate not less than 2.25 mtrs below normal ground level,connecting to copper strip 20 X3 mm as earthing strip by means of bolts,nut check nut and washers protected with and including 40 mm dia medium grade GI pipe,necessary excavation and earth work,magnesium sulphate (80 Kg) ),charcoal (2 Qtl) and common salt (2 Qtl) filling,watering arrangement with 20 mm GI pipe medium grade including PCC pit with pre cast RCC (1:2:4) cover ,GI funnel with test point,testing (all as shown in electrical plate No 5 and commissioning compele all as specified and directed. Note:- On testing ,after completion ,if the earth resistance below 1 Ohms is not obtained ,earthing will rejuvenated at no extra cost till the desired earth resistance is obtined. 77 Preparation of old steel surfaces of any description over 10 cm width or girth, not otherwise described and M&L for applying one coats of synthetic enamel paint over a coat of zinc chromate primer compele all as specified and directed. 78 Supply and laying broken stone of gauge 45 mm over installation complete all as specified anddirected. 79 Supplying, installing, testing and commissioning OUT door type HT Bus bar chamber, suitable for 11KV,50 Hz AC Supplymade out of MS sheet of 3.15mm thickness for outer sheet and CPRI approved, factory made in an approved factory having seven tank treatment process for powder coating with thickness not less than 60 microns provided with suitable gasket to make it dust / vermin proofdouble door type including locking arrangement bus bar chamber enclosed completehaving legs 45 cms made out of 65X65X6 mm angle iron grouted on brick masonary plateform upto 30 cms. Brick masonaryplateform should be 60 cms above the ground level comprising the followings:- (a) 60 X10 sqmm sqmm cross section area conductive electrolyte grade copper bus bar of required length with heat shrinkable sleeves,duly colour coded.(b) Bakelite insulators having short circuit with stand capacity of 26.3 kilo Amp-01 (Set of three) Note:- (i) The panel shall be front operated with cable entry from bottom with cable glands. The fault with standing capacity shall be 25 KA. Earth bus shall be part of the main feeder pillar. (ii) Cost for construction of plateform for panel of brick masonary work in CM 1:6 withfoundation PCC 1:4:8 type D-2 including plaster work,PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate and no extra payment will be made. (iii)Danger Sign Board of 11000 KV should be enclosed on panel with red colour. 80 Dismantling air break gang operated switch vertical/ horizontal mounted including insulators and operating mechanism and removing the same from site compele all as specified and directed. 81 Material and labour for fixing air break gang operated switch outdoor type HT 11 KV triple pole mechanically operated mounted on HT insulators horizontal/ vertical type as existing at site including MS galvanised steel frame with operating mechanism worked from ground level including operating rod of size 32 mm dia GI medium grade for current rating of cap 200 Amps 11000 volts with locking arrangement, MS clamps, bolts, nuts and washers etc including two coats of aluminum paint over a coat of red oxide primer on MS work compele all as specified and directed. 82 Supply and fixing in replacement drop out fuse assy single pole 11 KV, 25 Amps rating complete with expulsion fuse element mounted on four/two pole structures including necessary nuts, bolts and washers compele all as specified and directed. 83 Supply and fixing in replacement battery charger 12/24volt with over charge protection suitable forlead acid battery upto 180AH capacity compele all as specified and directed. 84 S & F Danger Sign Board In Red Colour (Electric ) surface stcker type approx size 15x22cm complete all as specified and directed 85 Supply and fixing in replacement galvanised steel tube, light grade laid along the pole/ in trenches / underroad or floor of size 80 mm bore including removing the rusted old one compele all as specified and directed. 86 Supply and fixing in replacement galvanised steel tube, light grade laid along the pole/ in trenches / underroad or floor of size 100 mm bore including removing the rusted old one compele all as specified and directed. 87 Supply and fixing in replacement of MCCB enclosure metal box as per existing/Sample including bus bar for fixing of 4 pole MCCB of size 63 Amp to 160 Amp in Walls etc complete all as specified and directed. 88 Excavation in post hole (or similar hole) each n exc 0.5 cum,getting out,returning,filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm in soft/loose soil compele all as specified and directed. 89 M&L for providing cement concrete type C2 1:3:6 using 40 mm graded crushed stone aggregate as in foundations,filling and mass concrete compele all as specified and directed. 90 Supply only chain link fencing made out of mild steel galvanised wire of any size all compele all as specified and directed. 91 Fixing only chain link fencing including line wires,any mesh,sizes and type to any type of strandards,rail,straining bolts etc including provision of binding wire complete all as specified and directed.Note:- (i) Supply only fencing will be measured and paid separately. (ii) Supply and fix mild steel nut bolt,line wire and flat will be measured and paid separately. 92 Supply and fix mild steel section finpost and struts for fencing including cutting top to shape as directed drilling hole notching for wire etc or flat iron fillet (for security wire mesh etc) including all necessary drilling bolting or riverting etc complete all as specified and directed. 93 Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long & dia of shank 11 to 15 mm compele all as specified and directed.
Contract Date: Oct 15, 2025 Contract Value : ₹ 29.61 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
26.
Health and Family Welfare #7188765 AOC
Bulk Tender , Name Of Tablets/Cap. , Abciximab 10Mg , Aceclofenac 50Mg. , Acelofenac 100Mg , Acelofenac 200Mg , Acetazolamide 250 Mg , Acitrom 0.2Mg , Acitron 1 Mg. , Acitron 2 Mg. , Acitron 4 Mg. , Acyclovir 200 Mg. , Acyclovir 400 Mg. , Acyclovir 800 Mg. , Albendazole 100Mg , Albendazole 200Mg , Albendazole 400 Mg , Alectinib 150Mg , Alfacalcidol 0.25 Mcg , Allopurinol 100 Mg , Alprazolam 0.25Mg. , Alprazolam 0.5Mg. , Amiodarone 100Mg. , Amiodarone 200Mg , Amisulpiride 100 Mg , Amisulpiride 50 Mg , Amitriptyline 25 Mg , Amitriptyline 75 Mg , Amlodipine 2.5Mg. , Amlodipine 5 Mg+ Atenolol 50Mg , Amlodipine 5Mg. , Amoxycillin 250Mg. , Amoxycillin 500Mg , Amoxycillin Dispersible 125Mg , Amoxycillin Trihydrate Dispersible , Amoxycillin+Clavulanic Acid (250Mg+125Mg) , Amoxycillin+Clavulanic Acid (500Mg+125Mg) , Ampicillin 250 Mg. , Ampicillin 250Mg.+Cloxacillin 250 Mg. , Ampicillin 500 Mg. , Artemether+ Lumefantrine , Artesunate ( 3 Tab) 20 Mg And 2 Tab Of Sulphadoxime 7500 Mg + Pyrimethamine 37.5 Mg Tab Ip ( Age Group 15 Oe Above) , Artesunate 100 Mg.( 3 Tab) + Sulphadoxime 750 Mg (1 Tab) + Pyrimethamine 37.5 Mg Ip Tab (1 Tab) ( Age Group Between 9 To 14 Year) , Artesunate 100 Mg.( 3 Tab) + Sulphadoxime 750 Mg + Pyrimethamine 37.5 Mg Ip Tab ( 1 Tab) ( Age Group Between 5 To 8 Year) , Artesunate 50 Mg.( 3 Tab) + Sulphadoxime 500 Mg (1 Tab) + Pyrimethamine 25 Mg Tablets ( Age Group Between 1-4 Year) , Artesunate 60 Mg. , Asprin 150Mg. , Asprin 325 Mg. , Asprin 75Mg. , Atenolol 100Mg. , Atenolol 25Mg. , Atenolol 50Mg. , Atezolizumab 1200Mg , Atorvastatin 10 Mg. , Atorvastatin 10 Mg.+Fenofibrate 145Mg , Atorvastatin 10 Mg.+Fenofibrate 160Mg , Atorvastatin 20 Mg. , Atorvastatin 40 M G. , Azathioprine 50Mg. , Azithromycin 250 Mg. , Azithromycin 500 Mg. , B.Complex Nfi(Prophylactic) , Baclofen 10 Mg , Betahistine 16 Mg , Betahistine 8 Mg , Betamethasone 0.5Mg , Betamethasone 1Mg , Bisacodyl 5Mg. , Bisoprolol 5Mg , Brivaracetam 100Mg , Brivaracetam 50Mg , Brivaracetam 75Mg , Buperonorphin Sublingual 0.2Mg , Cabergoline 0.5Mg , Calcium Citrate Usp 1200 Mg Equivalent To Elemental Calcium 252Mg & Calcitriol Bp 0.125 Mcg Overages Of Calcitriol Added. , Calcium D3/500Mg. , Capecitabine 500Mg , Carbamazepine 200Mg , Carbamazepine 400Mg , Carbamazepine Sr 100Mg , Carbimazole 5 Mg. , Carvedilol 12.5 Mg , Carvedilol 6.25 Mg , Cefalexin 200Mg , Cefalexin 250Mg. , Cefalexin 500Mg , Cefalexin Dispersible 125 Mg , Cefazolin 100Mg , Cefazolin 50Mg , Cefixime 100Mg. Dt , Cefixime 200Mg. , Cefixime 50 Mg Dt , Cefpodoxime 200Mg. , Cefpodoxime 50Mg. , Cefpodoxime Proxetil 500Mg. , Cefuroxime 500 Mg. , Cenarizine 10 Mg , Cenarizine 25 Mg , Cetirizine 10 Mg. , Cetirizine 5Mg. , Cetirizine+Ambroxol , Cetuximab 100 Mg , Cetuximab 500 Mg , Chloramphenicol 250 Mg. , Chlordiazepoxide 10 Mg , Chlorine Based Compound ( Sodium Dicholoroiso Cyanurate ) Nadcc Tablets 75 Mg Wuth Available Chloroine 45 Mg Bis , Chloropheniramine Maleate 2.5Mg. , Chloropheniramine Maleate 4Mg. , Chloroquine Phosphate 250 Mg. , Chlorpromazine Hydrochloride 50Mg. , Chlorpromazine Hydrocloride 100Mg. , Chlorthalidone 12.5Mg , Chlorthalidone 6.25Mg , Chole Calciferol 2,000 Iu , Chole Calciferol 60,000 Iu , Chymotrypsin &Trypsin 1,00,000 Iu , Ciprofloxacin 250Mg. , Ciprofloxacin 500 Mg +Tinidazole 600 Mg , Ciprofloxacin 500Mg. , Clarithromycin 250 Mg , Clindamycin 150Mg. , Clindamycin 300Mg. , Clomiphene Citrate 50 Mg , Clonazepam 1 Mg , Clonazepam 2 Mg , Clonidine 100Mcg , Clopidogrel 75Mg. , Clopidogrel 75Mg.+ Aspirin 75Mg , Clotrimazole 10Mg/G , Clotrimazole Vaginal 100Mg , Cloxacillin 500Mg. , Clozapine 100Mg. , Clozapine 50Mg. , Conjugated Estrogens 0.625Mg , Crizotinib 250Mg , Curcumin 250 Mg+Bioperin 250 Mg , Cyclophosohamide 50 Mg. , Cyproheptadine Hcl 2Mg , Dacomitinib Monohydrate Equivalent 15 Mg Of Dacomitinib , Dacomitinib Monohydrate Equivalent 30 Mg Of Dacomitinib , Dacomitinib Monohydrate Equivalent 45 Mg Of Dacomitinib , Dapsone 100Mg. , Dasatinib 20Mg , Dasatinib 50Mg , Deferasirox 100Mg , Deferasirox 400Mg , Deferasirox Dispercible 100 Mg , Deferasirox Dispercible 250 Mg , Deferasirox Dispercible 400 Mg , Deflazacort 30Mg , Deflazacort 6Mg , Dexamethasone Sodium 0.5 Mg. , Diacerin +Glucosamine 50 Mg +750 Mg , Diacerin 50 Mg. , Diazepam 10Mg. , Diazepam 5Mg. , Diclofenac 50 Mg+ Thiocolchiside 4 Mg , Diclofenac 50 Mg+Serrtipeptidase 10 Mg , Diclofenac 50Mg.+Paracetamol 325 Mg. , Diclofenac 50Mg.+Paracetamol 325 Mg.+ Serrtipeptidase 10Mg. , Diclofenac Diethyolamoniummgel Bp 1.16% W/W Equivalent To Diclofenac Sodium Bp 1.0% W/W In A Gel. , Diclofenac Potassium Bp 50Mg Sugar Coated , Diclofenac Sodium 100 Mg. , Diclofenac Sodium 50 Mg. , Diclofenac Sodium Ip 100 Mg Sustained Release Film Coated , Diclofenac Sodium Ip 75 Mg Sustained Release Film Coated , Diclofenec Sodium 125 Slow Release Diclofenec Sodium 25 Mg Immidiate Release , Dicofenac Potassium 50Mg. , Dicyclomine 10 Mg. , Dicyclomine 20 Mg. , Diethylcarbamazine 100 Mg , Diethylcarbamazine 50 Mg , Digoxin 0.25Mg , Diltiazem 30Mg. , Diltiazem 60Mg , Diltiazem Sr 90 Mg , Diphenylhydramine 50Mg. , Divalproex Sodium 250 Mg , Divalproex Sodium 500 Mg , Doclofenac Free Acid 46.5Mg Equivalent To Diclofenac Sodium Ip 50Mg Dispersable , Domperidone 10 Mg. , Domperidone 20 Mg. , Domperidone 5 Mg. , Donepezil 5 Mg , Doxifluridine 200 Mg , Doxifluridine 200 Mg , Doxophyline 400Mg , Doxycycline 100Mg. , Doxylamine Succinate 10 Mg , Doxylamine Succinate 10Mg+Pyridoxine 10Mg , Drotaverine 40 Mg , Duloxitine 30Mg , Dydrogesterone 10 Mg , Enalapril Maleate 2.5Mg. , Enalapril Maleate 5Mg. , Erlotinib 150 Mg , Erythromycin Stearate250 Mg. , Escitalopram 10Mg. , Escitalopram 20Mg. , Escitalopram 5Mg. , Ethamsylate 500Mg. , Ethinyl Estradiol 0.05 Mg , Etophylline 231 Mg +Theophplline 69 Mgmg. , Etophylline77 Mg + Theophplline 23 Mg. , Etoposide 50 Mg , Etoricoxib 120 Mg , Etoricoxib 60 Mg , Etoricoxib 90 Mg , Everolimus 10Mg , Feerous Sulphate , Fenofibrate 145Mg , Fenofibrate 160Mg , Fenofibrate 200Mg , Feropenam 200Mg , Fexofenadine 120Mg. , Fexofenadine 180Mg , Fluconazole 150 Mg , Fluconazole 50 Mg. , Flunarizine 10 Mg , Fluxetine 20 Mg , Folic Acid 5Mg. , Frusemide 20 Mg.+Spironolactone 50Mg , Frusemide 40 Mg. , Furazolidone 100Mg , Gabapentin 300Mg. , Geftinib 500 Mg , Glibenclamide 5Mg , Gliclazide 80 Mg. , Glimepride 1Mg. , Glimepride 2Mg , Glipize 1Mg.+Metformin 500Mg. , Glyceryltrinitrate 0.5Mg , Griseofulvin 125G. , Griseofulvin 250G. , Haloperidol 10 Mg. , Haloperidol 15 Mg. , Haloperidol 5 Mg. , Hydoxizine Hydrochloride 10Mg. , Hydoxy Urea 500Mg. , Hydrochloroquine 200Mg. , Hydrochlorthiazide 25Mg. , Hydrochlorthiazide 50Mg , Hydroxychloroquine 200Mg , Hydroxychloroquine 400Mg , Hyoscine Butylbromide 10Mg. , Ibandronic Acid 50 Mg , Ibuorofen 400 Mg. , Ibuorofen 400 Mg.+Paractamol 325Mg. , Imatinib Mesylate 100Mg , Imatinib Mesylate 400Mg , Imipramine Hcl 25Mg. , Imipramine Hcl 75Mg. , Indomethicin 75 Mg , Iron And Folic Acid Enteric Coatef Tab Dried Ferrous Sulphate Ip Eq.To 45 Mg Elemental Iron And 400 Mcg Folic Acid Ip (Pink Color) Wifs Junior , Iron And Folic Acid Enteric Coatef Tab Dried Ferrous Sulphate Ip Eq.To Ferrous Iron 100 Mg And Folic Acid 0.5 Mg (Bue Tablet) , Iron And Folic Acid Enteric Coatef Tab Ferrous Sulphate Ip To Ferrous Iron 100 Mg And Folic Acid 1P 0.5 Mg Granuled ( Red Tablet) , Iron Folic Acid , Isoniazide 100Mg. , Isosorbide Dinitrate 10Mg , Isosorbide Dinitrate 5Mg , Isosorbide Mononitrate 10Mg , Isosorbide Mononitrate 20Mg , Itraconazole 100 Mg , Ivermectin 3Mg , Ivermectin 6Mg , Ketoconazole 200Mg. , Ketorolac 10Mg. , Labetalol 50 Mg , Lactobacillus 60 Millon Spores , Lamivudine And Zidovudine Ip 150/300 Mg , L-Arginine Granules 1Mg , L-Arginine Granules 5Mg , Leflunomide 10Mg , Lincomycin Hydrocloride Sustained Release Tab 1000 Mg , Loperamide 2Mg. , Loperidone 2 Mg , Lorazepam 1Mg. , Lorazepam 2Mg. , Lorlatinib 100/75/25 Mg , Losarten 25Mg. , Losarten 50Mg. , Losarten 50Mg.+Hydrochlorthiazide 12.5Mg. , Magnesium Hydroxide + Aluminium Hydroxide+ Simethecon , Magnnesium Hydroxide+Aluminium Hydroxide(500Mg.+250Mg.) , Melfoquine , Metformin 500Mg. , Metformine 500Mg.+Glibenclamide 1Mg. , Metformine 500Mg.+Glibenclamide 2Mg , Methotrexate 10 Mg , Methotrexate 2.5Mg. , Methotrexate 5 Mg , Methyl Ergometrine Maleate 0.125Mg. , Methyl Predinisolone 10 Mg. , Methyl Predinisolone 16Mg. , Methyl Predinisolone 40 Mg , Methyl Predinisolone 4Mg. , Methyl Predinisolone 8Mg. , Methylcobalamine 1500 Mcg , Methyldopa 250Mg. , Metoclopramide 10Mg. , Metolazone Usp 2.5 Mg , Metoprolol 25Mg. , Metoprolol 50 Mg. , Metronidazole 200 Mg. , Metronidazole 400Mg. , Micronised Progestrone 200Mg , Misoprostol 200Mcg , Nifedipine 5Mg. , Nilotinib 150Mg , Nilotinib 200Mg , Nimesulide 100Mg. , Nimesulide 100Mg.+Paracetamol 325 Mg. , Nitazozanide 200 Mg Dt , Nitrazepam 10Mg. , Nitrazepam 5Mg. , Nitrofruantoin 100Mg , Nitrofurentoin 100Mg , Norethistrone 10Mg , Norethistrone 5Mg , Norethistrone 5Mg , Norfloxacin 400Mg. , Norfloxacin 400Mg. + Tinidazole 600Mg. , Octreotide 0.05Mg(Containing Octreotide As Free Peptide) , Ofloxacin 200 Mg +Orinidazole 500 Mg , Ofloxacin 200Mg. , Ofloxacin 400Mg. , Olanzapine 10Mg. , Olanzapine 20Mg. , Olanzapine 5Mg. , Omalizumab 150 Mg , Omeprazole 20Mg. , Omeprazole 20Mg.+Domperidon 10 Mg , Ondansetron 2Mg. , Ondansetron 4Mg. , Ondansetrpon 8Mg. , Ornidazole 500Mg. , Oxazepam 15 Mg , Oxcarbamazepin 150Mg. , Oxcarbamazepin 300Mg. , Oxcarbamazepin 600Mg. , Palonosetron .5Mg+Netupitant 300Mg , Pantoprazole 40 Mg+ Domperidone 10 Mg , Pantoprazole 40Mg. , Paracetamol 500Mg. , Paracetamol 650 Mg. , Pazopanib 200Mg , Pazopanib 400Mg , Pencicillin V 125 Mg , Pencicillin V 250 Mg , Phenobarbitone 30Mg. , Phenytoin Sodium 100Mg. , Phenytoin Sodium 50Mg , Pilocarpine Hydrochloride 5 Mg , Piogliatazone 15Mg. , Piogliatazone 30Mg. , Piracetam 800Mg. , Piroxicam 20 Mg , Povidine Iodine Vaginal 200Mg , Prazosin 2.5 Mg. , Prazosin 5Mg. , Prazosin Hydrochloride 2.5 Mg , Prazosin Hydrochloride 5.0 Mg , Prednisolone 10Mg. , Prednisolone 20Mg. , Prednisolone 5Mg. , Pregabalin 75Mg , Premixed Human Insulin Analogue (R- Dna Origin) , Primaquine 15 Mg , Primaquine 2.5Mg , Primaquine 7.5Mg , Progestrone 200Mg , Progestrone 300Mg , Promethazine 25Mg. , Propranolol 10Mg , Propranolol 20Mg. , Propranolol 40Mg. , Pyridoxine 10Mg. , Pyridoxine 40Mg , Quinine Sulphate 150Mg. , Quinine Sulphate 300Mg. , Rabeprazole 20Mg. , Ramipril 2.5Mg , Ramipril 5Mg. , Ranitidine 150Mg. , Ranitidine 300Mg. , Ribociclib 200Mg , Risperidone 1Mg. , Risperidone 2Mg. , Risperidone 2Mg+Trihexiphenydril 2Mg , Risperidone 4Mg. , Rosuvastatin 10Mg. , Rosuvastatin 20Mg. , Roxithromycin 150 Mg.. , Roxithromycin 300Mg. , Roxulotinib 15 Mg , Roxulotinib 20 Mg , Roxulotinib 5 Mg , Sacubitril/Valsartan 100 , Sacubitril/Valsartan 200 , Salazopyrine 1000Mg , Salazopyrine 500Mg , Salbutamol Sulphate 2 Mg , Serratiopeptidase 10Mg. , Serratiopeptidase 20Mg. , Sertraline 100Mg. , Sertraline 25Mg. , Sertraline 50Mg. , Sildenafil 25Mg , Sildenafil 50Mg , Sitagliptin Phosphate 100Mg , Sitagliptin Phosphate 25Mg , Sitagliptin Phosphate 50 + Metformin 1000/500Mg , Sitagliptin Phosphate 50Mg , Sodium Valproate +C.R.Valporicacid 200Mg. , Sodium Valproate +C.R.Valporicacid 300Mg. , Sodium Valproate +C.R.Valporicacid 500 Mg(Extended Release) , Sodium Valproate 200Mg. , Sodium Valproate 300Mg. , Sodium Valproate500mg. , Spironolactone 100Mg. , Spironolactone 25Mg. , Spironolactone 50Mg. , Sulfadoxine + Pyrimethamine 500Mg+80Mg. , Sulfamethoxazole 100Mg +. Trimethoprim 20Mg+ , Sulfamethoxazole 200Mg +. Trimethoprim 80 Mg+ , Sulfamethoxazole+ Trimethoprim Tab 400Mg+80Mg. , Sulfamethoxazole+Trimethoprim 800Mg+160Mg. , Tab Trihexiphendyl 2Mg , Tab Trihexiphendyl 2Mg , Tamoxifen 10Mg. , Tamoxifen 20Mg. , Tamsulosin 4Mg , Telmistran 20Mg. , Telmistran 40Mg. , Telmistran 40Mg.+Hydrochlorthiazide 12.5 Mg , Telmistran 80 Mg. , Temozolamide 100Mg. , Temozolamide 250Mg , Thyroxin Sodium 25 Mcg. , Thyroxin Sodium 50 Mcg. , Tinidazole 300 Mg. , Tinidazole 500Mg. , Torasemide 10 Mg. , Torasemide 20 Mg. , Tramadol 100Mg. , Tramadol 50Mg , Tramadol 50Mg + Paracetamol 325Mg , Tranexamic Acid 500Mg. , Trifluperazine 5Mg+Trihexyphenydyl 2Mg , Trihexyphenidyl 2 Mg , Trimetazine 60Mg. , Valpoic Acid 300Mg. , Valpoic Acid 500Mg. , Venlafaxine 37.5Mg , Verapamil 40 Mg , Vildagliptin 50Mg , Vildagliptin 50Mg Metformin Hci 1000Mg , Vildagliptin 50Mg Metformin Hci 500Mg , Vildagliptin 50Mg Metformin Hci 850Mg , Vitamin A , Vitamin C 500Mg. , Vitamine B,12 100Mg. , Warfarin Sodium 1Mg. , Warfarin Sodium 2Mg. , Warfarin Sodium 3 Mg. , Warfarin Sodium 5Mg. , Zinc Sulphate 20 Mg (Dispersible) , Name Of Injections , 5-Flurouracil .250Mg , 5-Flurouracil .500Mg , Acyclovir 250Mg/Vial , Adalimumab Inj.40Mg , Adenosine 6Mg/2Ml(2Ml Amp) , Adrenaline 1Mg/Ml (M1l. Amp.) , Aflibercept (Intracitreal) , Alfa Beta Arte Ether , Alpha Beta Arteether 150Mg /2Ml With Solvent , Amidarone 50Mg/Ml 3 Ml Vial. , Amikacin 100Mg./ 2Ml Vial , Amikacin 250 Mg. /2 Ml Vial , Amikacin 500Mg / 2Ml Vial , Ampicillin+Cloxacillin ( 250 Mg.+ 250 Mg) 5Ml Vialwith Solvent , Anti Hemophiliac Factor Viii, Solvent Detargent & Monoclonal Purification (Dried Powder In ) Pack Size 250-400 Ius Per Pack , Anti Hemophiliac Factor Viii, Solvent Detargent & Monoclonal Purification (Dried Powder In ) Pack Size 250-400 Ius Per Pack , Anti Hemophiliac Factor Xi,Vapour Heated (Polysorbaate 80 & Vapor Heat,60O C, 10 Hrs,190 Mbar Then 80O C, 1Hr.375 Mbar) (Dried Powder In ) Pack Size 600 Ius , Arteether , Artemether 80Mg 1 Ml , Artesunate 60Mg/Vial.With Solvent , Atracurium Besylate 10 Mg/Ml 10 Ml.Amp. , Atracurium Besylate 10 Mg/Ml 2.5 Ml.Amp. , Atracurium Besylate 10 Mg/Ml 5 Ml.Amp. , Atropine Sulphate 0.6Mg.Per Ml Sc/Im/Iv , Bevacizumab Inj.100/400Mg , Bupivacine Hydrochloride 0.25 20Ml Vial , Bupivacine Hydrochloride 0.5% 20Ml Each Vial Contains: Bupivacine Hydrochloride 5 Mg, Sodium Chl0ride 8.0 Mg, Methyl Paraben 1.0 Mg , Bupivacine Hydrochloride For Spinal Anaesthesia 0.5% (Heavy) 4Ml Amp , Bupivacine Hydrochloride For Spinal Use 4Ml Vial , Bupivacine Hydrochloride Heavy 0.5% , 5Mg/Ml, Preservative Free, 4Ml Amp. For Intrathecal Use Only , Bupivacine Hydrochloride Heavy 4 Ml Amp. Each Vial Contains: Bupivacine Hydrochloride 5 Mg/Ml, Dextrose Monohydrate 80 Mg , Butorphanol Tartrate 1 Mg/Ml 1Ml , Caffeine Citrate 20Mg/Ml , Calcium Carbonate 10% 10Ml.Amp. , Calcium Gluconate 10% 10Mlamp. , Calcium Leucovorin 15Mg. , Calcium Leucovorin 30Mg. , Calcium Leucovorin 50Mg. , Carboplatin 150Mg. , Carboplatin 450Mg. , Carboporost 250Mg. , Carboporost 500Mg. , Carboprost 250Mcg 1Ml Amp , Carboprost Promithazin 250 Mcg/Ml 1Ml/Amp. , Carrdioplegia Solution 20Ml , Cefazolin 250 Mg , Cefepime 1Gm. With Solvent , Cefepime 2Mg.With Solvent , Cefepime Igm+Tazobactum 125 Mg (1.125Gm) Vial With Solvent , Cefoparazone 1Gm. With Solvent , Cefoperazone 1000Mg + Salbactum 500 Mg With Solvent , Cefoperazone 1000Mg +Tazobactum 125 Mg , Cefoperazone 250 Mg + Salbactum 250 Mg , Cefoperazone 500 Mg + Salbactum 500 Mg With Solvent , Cefotaxime 250Mg Salbactum 125 Mg. , Cefotaxime Sodium 125 Mg Vial With Solvent , Cefotaxime Sodium 1Gm Vial With Solvent , Cefotaxime Sodium 250Mg/Vialwith Solvent , Cefotaxime Sodium 500Mg.Vial With Solvent , Ceftazidime 1000 Mg +Salbactum 500 Mg , Ceftazidime 1Gm/Vial With Solvent , Ceftazidime 500 Mg With Solvent , Ceftriaxone 1000Mg +Salbactum 500 Mg With Solvent , Ceftriaxone 1Gm +Tazobactum 125 Mg , Ceftriaxone 1Gm. With Solvent , Ceftriaxone 250 Mg With Solvent , Ceftriaxone 500 Mg With Solvent , Cefuroxime 1Gm. , Cefuroxime 750Mg. , Centhaquine Citrate 1Gm , Chloroquine Phosphate 40 Mg/Ml 5Ml Amp , Chlorphenamine 25Mg. , Chlorphenamine Maleate 10Mg/Ml 10 Ml Vial , Chlorpromazine Hydrocloride 25Mg/Ml , Chlorquine Phosphate 64.5Gm/Ml 5Ml , Chromophenical 1Gm. , Cisatracurium 10Mg , Cisplatin 10Mg. , Cisplatin 50Mg. , Citicolin 250 Mg , Clindamycin 300Mg./2Ml , Clonidine Hydrochloride 1Ml Amp. Each Ml Contains Clonidine 150 Microgram , Cloxacillin 250Mg. , Colistimethate Sod (1 Million I U ) , Cyclophosphamide 200Mg , Cyclophosphamide 500Mg. , Cytarabine 100Mg. , Dacarbazine (Dtic) 200Mg With Solvent , Dacarbazine (Dtic) 500Mg.With Solvent , Dalteparin Sodium 10000Iu (Low Molecular Weight Heparin) , Dalteparin Sodium 2500Iu (Low Molecular Weight Heparin) , Dalteparin Sodium 5000Iu (Low Molecular Weight Heparin) , Darbepoitin Inj.25/40/60Ug , Daunorubicin 20Mg. , Decarbazine 200Mg. , Decarbazine 500Mg. , Decitabine 30 Mg , Decitabine 50 Mg , Denosumab Inj.120Mg , Desferrioxamine , Dexamethasone Sodium Phosphate 8Mg/2Ml(2Ml Vial) , Dexmedetomide Hydrochloridde 1Ml Amp. Each Ml Contains: Dexmedetomide Hydrochloridde 100 Microgram , Dexmedetomide Hydrochloridde 2 Ml , Dexmedetomidine 100Mg/Ml 2Ml Amp. , Dextrose 25 % 25Ml , Dextrose 50 % 25Ml , Diatrizoic Acid76% 20 Ml , Diatrizole Meglumine Sod.76% , Diazepam 5 Mg/Ml ( 2Ml Amp) , Diclofenac Sodium 25Mg/Ml 3Ml Amp , Dicyclomine 10Mg/2Ml Vial , Digoxine 250Mcg/Ml , Diltaizem 5Mg/1M 5Ml , Diptheria Antitoxin 1000Iu , Dobutamine 50Mg/5Ml , Docetaxel 120Mg.With Solvent , Docetaxel 20Mg.With Solvent , Docetaxel 80Mg.With Solvent , Docetaxel With Vit. E 120 Mg , Dopamine Hcl 40Mg/Ml 5Ml Amp , Doripenum 500 Mg. , Doxorubicine 10Mg. , Doxorubicine 50Mg. , Doxorubicine Liposome 10 Mg. , Doxorubicine Liposome 20 Mg. , Drotaverine 40Ml/2Ml( 2Ml Amp) , Emicizumab 150Mg , Emicizumab 30Mg , Emicizumab 60Mg , Enoxaparine 40Mg. Equivalant To 4000 Iu Vial , Enoxaparine 60Mg. Equivalant To 6000 Iu Vial , Epinephrine Hydrochloride 1Mg/Ml , Epirubicine 10Mg , Epirubicine 50Mg. , Erythropiotine 10000 Iu , Erythropiotine 2000 Iu , Erythropiotine 4000 Iu , Erythropoietin 2K/4K/10K , Esmolol 100 Mg Vial , Etanercept Inj.25Mg , Ethamsylate Imiv 250Mg( 2Ml Amp) , Etiophylline+Thiophylline 220Mg/2Ml , Etomidate 2Mg/Ml , Etoposide 100Mg. , Everolimus 5Mg , Factor Eight Inhibitor Bypassing Agents 500 Iu , Fentanyl Citrate 50 Mcg/Ml 2Ml.Amp. , Ferric Carboxymaltose Mg/Ml 10Ml Vial , Filgrastim 300 Mcg , Fluconazole 200Mg. , Flumazenil 0.1 Mg/Ml 5 Ml Multiple Dose Vial , Frusemide 10Mg/Ml (2Ml Amp) , Gama Globulin Coupled With Histamine Dihydrochloride 1Ml , Gemicitabine 1.4Gm. , Gemicitabine 1000 Mg Vial , Gemicitabine 200Mg. , Gentamicin 40Mg/Ml 2Ml Amp. , Glucagon 1Mg/1Ml , Glycopyrolate 0.5Mg+Neostigmine Methylsulphate 2.5 Mg (0.5Mg+2.5Mg) 5Ml , Glycopyrolate Usp .02Mg/Ml. ( 1Ml Amp.) , Granidetron 3Mg. , Haemostat 20Ml , Haloperidol 5Mg./Ml , Halothane 250Ml. , Hemocoagulase 1Ml Ampoule Each Ml Contains Hemocoagulase 1 Iu , Heparin 25000 Iu 5Ml , Heparin 5000 Iu/Ml 5Ml Vial , Hepatites B Imminoglobin 2Ml (100 Iu) , Hepatitis-B-Vaccine 0.5 Ml Vial (Pedia) , Hepatitis-B-Vaccine 10Ml Vial , Hepatitis-B-Vaccine 1Ml Vial (Adult) , Human Anti D Immunoglobin 300M/U , Human Anti D Immunoglobin 5 Gm , Human Fibrinogen Concenttrate 1Gm , Human Hepatitis Immunoglobin , Human Insulin Analogue Inj (Biosynthetic R- Dna Origin) Fast Acting Insulin Aspart 100 Iu/ Ml In 3 Ml Pfs , Human Normal Immunoglobin For Intravenous Use 5Gm/100Ml , Human Tetanus Hyperimmunoglobulin 250 I.U. , Human Tetanus Hyperimmunoglobulin 500 I.U. , Hydrocortisone Sodium Succinate 100Mg Vial With Solvent , Hydroxy Progesterone Caproate 250Mg/Ml , Hylurunidase , Hyoscine Butyl Bromide 20Mg/Ml 1Ml Amp , Hyoscine Butylbromide 20Mg./Ml , Ibandronicn Acid 6 Mg , Ifosphamide+Mesna 1Gm. , Imipenem+Cilastatin Sodium 500Mg. , Immunoglobin , Indacaterol + Glycopyrronium C30 , Inotuzumab Ozogamicin 1Mg. Excipient: Q.S. After Reconstitution, 1Ml Of Solution Contains 0.25 Mg Inotuzumab Ozogamicin , Insulin Degludec (R- Dna Origin) Long Acting Basal Insulin Analogue 100 Iu/ Ml In 3 Ml Pfs , Interferon Beta 30 Mcg (Pfs) , Ionic Contrast Media Dirtozote Meglumine Diatrazoate Sodium 60% ( For Non Invasine & Non Oral , Iron Dextran 50Mg/Ml 2 Ml Amp. , Iron Sucrose 100 Mg/5 Ml( 5Ml Amp.) , Iron Sucrose Amp.1.5Ml Amp. , Isoflurane 250 Ml Bott. , Isoprenaline 2Mg/Ml 1Ml , Isoxsuprine Hydrochloride 5 Mg/Ml 2 Ml Amp. , Ketamine 100 Mg/Ml 10Ml Vial , Ketamine Hydrochloride 50 Mg./Ml 10Ml Vial , Ketorolac 0.5% , Labetolol 20 Mg/Ml, 4 Ml.( 4Ml) , Labetolol 5 Mg/Ml, 2 Ml. , L-Asparginase 10000 Iu , L-Asparginase 5000 Iu , Levetiracetam 250 Mg , Levetiracetam 500 Mg , Levobupivacine Hydrochloride 0.5% 10Ml Ampoule Each Ml Contains Levobupivacaine Hydrochloride 5Mg , Levosulpride 50Mg/Amp. , Lignocain (Preseravatine Free) 2% 50Ml , Lignocain 2% + Adrenaline 5Mcg/Ml 30 Ml Vial , Lignocain 2%(21.3Ml/Mg) 30Ml Vial , Lignocain 4% Topical Solution 30 Ml. , Lignocain 5% Ip Heavy For Spinal Use 2 Ml. , Lignocain Hydrochloride 2% For I.V. 30Ml , Lignocain Hydrochloride For Spinal Anaesthesia (Heavy) 0.05% 2 Ml Amp , Lignocain Hydrochloride Gel 2% W/V ( 30Gm Tube) , Lignocaine Hydrochloride 2% Each Ml Contains Lignocaine Hydrochloride 21.3 Mg, Sodium Chloride 6.0 Mg Methylparaben 1 Mg(As Preservative) Water For Injection 30 Ml Vial , Lignocaine Hydrochloride 2% With Adrenaline Each Ml Contains Lignocaine Hydrochloride 21.3 Mg, Sodium Chloride 6.0 Mg Methylparaben 1 Mg(As Preservative) Water For Injection Adrenaline 1:2,00,000 30 Ml Vial , Lincomycin 300Mg/Ml , Liraglutide (Glp- 1 Analogue) Biosynthetic R- Dna Origin. Eacj Pfs Contains 18 Mg Liraglutide/ 3Ml , Long Acting Risperidone , Long(Naturalvitamine K 1) , Lorazepam 2Mg Ml 1 Ml Amp , Lorazepam 2Mg Ml 2 Ml Amp , L-Ornithine L-Aspartate (5Gm) , L-Ornithine+L-Asparatate 5Mg/10Ml , Low Molcular Weight Heaparin 0.4 Mg , Low Molcular Weight Heaparin 0.6 Mg , Magnesium Sulphate 50%W/V 1 Ml Amp. , Magnesium Sulphate 50%W/V 2 Ml Amp. , Mephentermine 30Mg/Ml 10Ml Vial. , Mephentine 10Ml Vial , Meropenem 125 Mg.With Solvent , Meropenem 1Gm. With Solvent , Meropenem 250Mg.With Solvent , Meropenem 500Mg.With Solvent , Metaclopromide 5Mg/Ml 2Ml Amp. , Methocarbamol 100Mg , Methotrexate 15Mg./Ml Vial , Methotrexate 50Mg./Ml Vial , Methoxy Polyethylene Glycol-Epoetin Beta 100Mcg/0.3Ml Pfs , Methoxy Polyethylene Glycol-Epoetin Beta 50Mcg/0.3Ml Pfs , Methoxy Polyethylene Glycol-Epoetin Beta 75Mcg/0.3Ml Pfs , Methyl Ergometrine 0.2Mg/Ml 1Ml Amp. , Methylpredniosolone 1Gm. With Solvent , Methylpredniosolone 500 Mg With Solvent , Metoprolol 1Mg/5Ml , Midazolam Hcl 1Mg/Ml 5Ml Amp. , Midizolam Hcl 1Gm /Ml 10Ml. Vial , Milrinone 10Mg/Ml. , Mitomycin 10Mg. , Mitoxantrone 20Mg. , Morphen Sulphate 10Mg/Ml (1Ml Ampoule) , Multivitamin 10Ml. Amp. , N-Acetyl Cydteine 200 Mg/Ml In 10 Ml Amp , Naloxone 0.4Mg/Ml 1Ml Amp. , Nandrolone Decanoate 50Mg , Nano Paclitexel 300Mg. , Neofopam 20Mg , Neostigamine 2.5Mg/5Ml 1Ml Amp. , Neostigmine Methylsulphate 0.5 Mg/Ml 1Ml Amp. , Netilmycin 25 Mg./Ml 1 Ml Vial , Netromycin 10 Mg. , Nikethamide Amp. , Nimotuzumab 50Mg 10Ml Vial , Nitroglycerine Usp 25Mg /5Ml ( 5Ml Amp.) , Non Ionic Contrast Media Iohexl For I/V Use 350Mg/100Ml , Non Ionic Contrast Media Iohexl For I/V Use 350Mg/50Ml , Noraderanaline 2Mg Base/2 Ml Amp. , Ntg 25Mg Patch , Obinutuzumab 1000Mg , Octreotide 0.10Mg(Containing Octreotide As Free Peptide) , Octreotide 10Mg , Octreotide 20Mg , Octreotide 30Mg , Octreotide Lar 30 Mcg , Olanzapine 10Mg/Vial , Omalizumab 150 Mg , Omeprazole L 40Mg. 10Ml Vial , Ondansetron 2Mg/Ml, (2Ml Amp.) , Ondansetron 2Mg/Ml, (4 Ml Amp.) , Ornidazole 500Mg. , Oxaliplatin 100 Mg , Oxaliplatin 50Mg , Oxytocin 5 Iu /Ml 1Ml Amp , Oxytocin I.P. As Oxytocin Solution Equivalent To 5 Oxytocic Units Per Ml (Synthetically Prepared). Also Contains 0.5% Chlorbutol I.P. As Preservative Each Ampoule , Paclitaxel 100Mg. With Solvent , Paclitaxel 260Mg With Solvent , Paclitaxel 30Mg With Solvent , Paclitaxel Injection Concentrate For Nanodispersion 100 Mg/0.91Ml , Paclitaxel Injection Concentrate For Nanodispersion 300 Mg/2.73Ml , Paclitaxel Protein Bound Particles For Injectable Suspension(Albumin-Bound) , Paclitaxel With Cremophore-El,Multidose Vial 100Mg , Paclitaxel With Cremophore-El,Multidose Vial 300Mg , Paclitaxel With Cremophore-El,Multidose Vial 30Mg , Pancrunium 10Mg 5Ml , Pancrunium 2Mg/Ml 2Mkl Amp. , Paracetamol Amp. , Pegfilgrastim Inj.6Mg/0.6Ml , Pegylated Liposomol Doxorubicin 10 Mg/5Ml , Pentaglobulin(1Gm Enriched Immunoglobulins) , Pentaprazole 40Mg. Vial With Solvent , Pentazocin Lactate 30 Mg/Ml ( Aml Amp.) , Pertuzumab 420Mg , Pethidine Hydrochloride 50Mg. , Pheneramine Maleate 22.75Mg/Ml , Phenobarbitone 200Mg , Phenylephrine 10Mg. , Phenylephrine Hcl Ip 0.12% W/V Naphazoline Hcl Usp 0.05 W/V Chlorpheniramine Maleate Ip 0.1% W/V Menthol Ip 0.005%W/V Comphor Ip 0.01% W/V Benzalkonium Chloride Solution Ip 0.01% W/V (As Preservative ) In Strerile Aqueous Base 10 Ml Vial , Phenytoin Sodium 50Mg/Ml 2Ml Amp. , Phylomenadione Bp 10 Mg./Ml., 1 Ml. Amp. , Phytomenadione ( K1) 1Mg , Phytomenadione (K1) 10 Mg , Piperacillin+Tazobactum 1000 Mg + 125 Mg 10 Ml Vial With Solvent , Piperacillin+Tazobactum 2000Mg + 250 Mg 20 Ml Vial With Solvent , Piperacillin+Tazobactum 4.5 Gm Vial With Solvent , Placenta Extracts 0.1Gm 2Ml Amp , Pneumococcal Conjugated Vaccine 13 Valent , Polymyxin B Sulphate 5 Lack Unit , Polymyxin B Sulphate Bp 5000 I.U Chloramphenicol Ip 4 Mg Dexamethasone Sodium Phosphate Ip 1 Mg Phenylmercuric Nitrate Ip 0.00001 (As Preservative )In A Sterile Base 5 Ml Vial , Polymyxin B Sulphate Bp 5000 I.U Chloramphenicol Ip 4 Mg Phenylmercuric Nitrate Ip 0.00001 (As Preservative )In A Sterile Base 5 Ml Vial , Potassium Chloride 150Mg/10Ml Amp. , Pralidoxime 25Mg Per Ml 20Ml Amp. , Procine Lung Surfactant 120 Mg , Procine Lung Surfactant 240 Mg , Promethazine 25Mg , Promethazine 50Mg. , Propofol 1% 10Mg/Ml 10Ml Vial. , Propofol 1% 10Mg/Ml 20Ml Vial , Propofol 1% 10Mg/Ml 50Ml Vial , Protamine Sulphate 10Mg/Ml , Prothrombin Complex Concentrate With Vitamin K Dependent Coogulation Factors Ii,Vii,Ix,X Inhibitory Protein C&S , Prothrombin Complex Concentrate With Vitamin K Dependent Coogulation Factors Ii,Vii,Ix,X Inhibitory Protein C&S , Quinine Dihydrochloride 150Mg/ Ml 2Ml Amp. , Quinine Dihydrochloride 1Ml , Quinine Sulphate 300Mg/Ml 2Ml Amp , Rabeprazole 20Mg.With Solvent , Rabeprazole 40Mg.With Solvent , Rabies Immunoglobines Vial , Rabies Vaccine Ip Human (Purified Chick Embryo Cell Culture 2.5 Iu For Id) , Rabies Vaccine Tissue Culture , Ranibizimab (Intracitreal) , Ranibizumab 10Ml/Mg , Ranitidine 50Mg/2Ml , Recombinant Interferonbeta1a Inj.30Ug , Recombinant Tpa , Reteplase Ivbolus 10U , Rituximab 100 Mg , Rituximab 500 Mg , Rituximab Inj.100/500Mg , Rocuronium 10Ml Vial , Ropivacaine 0.5% 20Ml , Ropivacaine Hydrochloride 0.5% (Preservative Free) 10 Ml Vial Each Ml Contains Ropivacaine Hydrochloride 5Mg Sodium Chloride , Ropivacaine Hydrochloride 0.75% (Preservative Free) 10 Ml Vial Each Ml Contains Ropivacaine Hydrochloride 7.5Mg Sodium Chloride 7.5Mg , Sargramostin 500 Mg , Secukinumab 150Mg/1Ml , Sevoflurane 200Cc , Sevoflurane-250Ml , Snake Venom Anti Serum 10Ml Vial , Snake Venom Anti Serum Powder From 10Ml Vialwith Solvent , Sodium Bicarbonate 7.5%/10Ml , Sodium Fluorescein Dye 20% 3Ml , Sodium Hyaluronate(Intraocular) 10Mg/Ml 2Ml , Sodium Nitroprusside , Sodium Thiopeentone 0.5Gm Powder/Vial 20Ml Vial With Solvent , Sodium Valporate 100Mg/Ml 5Ml Vial , Somatrogon 24 Mg/1.2 Prefilled Pen , Somatrogon 60 Mg/1.2 Prefilled Pen , Somatropin 16Iu/5.3Mg , Somatropin 36Iu/12Mg , Somatropin Rhgh 5Mg , Streptokinase 1500000 Iu , Streptomycin 0.75Mg. , Succinyl Choline Chloride 50 Mg/Ml 1Ml Vial , Surfactant 4Ml , Surfactant 8Ml , Taramadol 100M/Ml (2Ml Amp.) , Taramadol 50Mg/Ml (2Ml Amp.) , Tecoplanin 400Mg With Solvent , Temozolamide 100Mg , Terbutalime 0.5Mg/Ml , Teriparatide 600 Mcg/2.4Ml(Pfs) , Terlipressin 1Mg. , Tetanus Hyper Immuneglobulin 1000 Iu , Tetanus Toxide 0.5Ml , Tetanus Toxide 5Ml Vial , Thiopentone Sodium 500Mg With Solvent , Tirfiban 5Mg/100Ml , Tobramycine 60Mg , Tobramycine 80Mg , Torasemide 100Mg. , Tramadol Hydrochloride 100Mg/2Ml , Tranexamic Acid 5Ml Ampoule Each Ml Contains Tranexamic Acid 100Mg , Trastuzumab 150 Mg , Trastuzumab 440 Mg , Trastuzumab Emtansine 100 Mg , Trastuzumab Emtansine 160Mg , Trastuzumab Inj.140/440Mg , Triamcimdone Acctonide 10Mg/Ml , Triamcimdone Acctonide 40Mg/Ml , Triptorelin Pamoate [Sterile Lyophilized] 11.25Mg , Triptorelin Pamoate [Sterile Lyophilized] 22.50Mg , Tryphan Blue 0.06 , Ulinastatin 100000 Iu Vialseach , Ulinastatin 200000 Iu Vialseach , Unfractionated Heparin , Urokinase 5 Lac Iu/Vial , Valethamae Bromide 8Mg/Ml 1Ml Amp. , Valethamate Bromide 8Mg/Ml 1Ml Amp , Valtroic Acid , Vancomycin 125Mg. , Vancomycin 250Mg. , Vancomycin 500Mg. , Vasopressin 20 Iu/Ml , Vaspressine 40 Iu/Ml , Vecuronium Bromide 10Mg Lyophilized Vial , Vecuronium Bromide 2Mg/Ml (2Ml Amp) , Vicoelastic Hypermellose Ophthalmic Solution Pfs , Vinblastune 10Mg. , Vincristin Sulphate 1Mg. , Vit B 12 500Mcg/Ml 30Ml Vial , Vitamin C , Voriconazal 200Mg/Vial , Water For Injection 10Ml Amp. , Water For Injection 2Ml Amp. , Water For Injection 5Ml Amp. , Zoledronic Acid 4Mg. Vial , Zuclopenthixol 50Mg. , Name Of I/V Fluids , Aminoacid 10% 500Ml , Balanced Salt Solution In 1000Ml,Non Pvc,Dehp Free,Osmolarity 294 Sid Value 49.5 In Free Dlex Bag , Balanced Saltsolution In 500Ml,Nonpvc,Dehp Free,Osmolarity 294 Sid Value 49.5 In Free Flex Bag , Ceftaroline Fosamil (Zinforo) Powder For Concentrate For Solution For Infusion, Iv, 600 Mg , Ciprofloxacin 100Mg/50Ml 100Ml Ffs Bottle , Dextran 70 500Ml Bottle , Dextron 40 500Ml , Dextrose & 9% Normal Saline Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Dextrose 10% Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Dextrose 10% 500Ml Ffs Bottle , Dextrose 5% 500Ml Ffs Bottle , Dextrose 5% Self-Collapsible Cosed System Non Air Depen Dent I.V.Fluids Cotainer With Silicon Port Wit Port With Blue-Rip Off Seal 500Ml Bagbag B Bag , Dextrose With Saline 5%+9% 500Ml Ffs Bottle , Elastomeric Pumps With Flowrate 2Ml/Hr (Infusor).Max Volume 130Ml , Elastomeric Pumps With Flowrate 5Ml/Hr (Infusor).Max Volume 300Ml , Elastomeric Pumps With Multirate 1,2,3,Ml/Hr (Infuor) Max Volume 300Ml , Elastomeric Pumps With Multirate 2,3,5,Ml/Hr (Infuor) Max Volume 300Ml , Elastomeric Pumps With Multirate 5,7,12,Ml/Hr (Infuor) Max Volume 300Ml , Electrolyte –E- Dextrose 5G.,Sodium Aetate 0.64 G Sodium Chloride 5G.Potassium Chloride 75Mg.Sodium Citrate 75Mg.Calcium Chloride 5Mg.Magnesium Chloride 31Mg Sodium Meta B1 Sulphate 20Mg 500Ml Bottle Ffs Bottle , Electrolyte- G 500 Ml Ffs Bottle , Electrolyte- M 500Ml Ffs Bottle , Electrolyte- P 500Ml Ffs Bottle , Fat Emulsion 20%500 Ml Bottle , Fat Emulssion 20% 250Ml Bottle , Fluconazole 100Ml Bottle , Glutamine Dipeptide 100 Ml , Glycine 3 Ltr.Bottle , Hamodialysis Fluid Acetate 10 Ltr. , Heamodialysis Fluid Bicarbonate ( Part A 10 Ltr. + Part B 500 Gm 2 Pkt) , Heamodialysis Fluid Bicarbonate Pottassium Chloride Free ( Part A 10 Ltr. + Part B 500 Gm 2 Pkt) , Human Albumin 20% 100Ml Vial , Human Albumin 20% 50Ml Vial , Hydroxy Ethyl Starch 3% 500Ml Bottle , Hydroxy Ethyl Starch 6% 500Ml Bottle , Hydroxy Ethyl Starch 6% Solution With Sodium Chloride 0.9% Iv Infusion 500Ml Bottle , Insulin Degludec/ Insulin Aspart (R- Dna Origin) Solution For Sc Injection. 1Ml Of The Solution Contains 100 Units Insulin Degludec & Insulin Aspart (70 % Solube Insulin Degludec And 30 % Soluble Aspart) Equivalent To 2.56 Mg Satl- Free Anhydrous Insulin Degludec And 1.05 Mgsalt-Free Anhydrous Insulin Aspart In 3 Ml Pfs , L-Alanine + L-Glutamine 50Ml , Levofloxacin 500 Mg 100 Ml Bottle , Linazolid 300Ml/600Mg , Mannitol 20% 100Ml Ffs Bottle , Mannitol 20% 350Ml Ffs Bottle , Metronidazole 100Ml Ffs Bottle , Normal Saline 0.9% Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Normal Saline 0.9% 100 Ml Ffs Bottle , Normal Saline 0.9% 500Ml Ffs Bottle , Normal Saline 0.9% 500Ml Glass Bottle , Ofloxacin 200Mg. 100Ml Bottle , Omega 3 Fatty Acid 50Ml , Paracetamol 100 Ml , Peritoneal Dialysis Fluid 2Ltr.Pack , Premixed Human Insulin Analogue Inj (R- Dna Origin) Mixture Of Soluble Insulin Aspart 50% And Protamine Crystallised Insulin Aspart 50% 100 Iu/Ml In 3Ml Pfs , Propofol 1% Mct/Lct 20Ml In Ampule , Ringer Lactate 500Ml Ffs Bottle , Ringer Lactate Iv In Self Collapsibleviaflex Bag 1000 Ml , Ringer Lactate Iv In Self Collapsibleviaflex Bag 500 Ml , Ringer Lactate Ot Pack 500 Ml , Ringer Lactate Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Sodium Chloride0.3% 100 Ml Ffs Bottle , Sodium Chloride 0.9% 3Lit. , Tetra Starch 500Ml Bottle , Three Chamber Parentral Nutrition 1000 Kcal With Osmolarity 750 Mosom/Ltr 1440Ml , Three Chamber Parentral Nutrition 1400 Kcal With Osmolarity 1060 Mosom/Ltr 1540Ml , Tinedazole 200Mg/Ml 400Ml , Total Parentral Nutrition Kit 1000 Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Central Line -N7,1000Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Central Line -N7,1500Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Central Line -N7,2000Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Peripheral Line -N4,1000Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Peripheral Line -N4,1500Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Peripheral Line -N4,2000Ml , Waxy-Corn Hydroxy Ethyl Starch 130/0.4 In Plasma Adoptaed Solution , Name Of Surgical Items , 1 Fr, 28 G Picc With Stylet And Split Needle Introducer , 0.035 Guidewire Compatible Pta Dilation Catheter , 18 G Puncture Needle , 1-Pc Self Adhesive Drainable Stoma Bag For Colostomy & Illeostomy - Double Layered Self Adhesive With Flex Patern, Transparent Drainable Stoma Bag With Built In Filter And Velcro Outlet.Size 76 Mm , 1-Pc Self Adhesive Drainable Stoma Bag For Colostomy & Illeostomy - Swiss Roll Self Adhesive With Flex Patern, Transparent Drainable Stoma Bag With Built In Filter And Velcro Outlet. Size 75Mm , 1-Pc Self Adhesive Drainable Stoma Bag For Urostomy - With No Return Valve And Easy Flexible Outlet Size 15-45Mm , 2- Pc Pouches With Free Rotating Lockring Mechanism With Filter And Velcro Clamp Integrated In The Bag. Size 50Mm , 2- Pc Pouches With Free Rotating Lockring Mechanism With Filter And Velcro Clamp Integrated In The Bag.Size 40Mm , 2- Pc Pouches With Free Rotating Lockring Mechanism With Filter And Velcro Clamp Integrated In The Bag.Size 60 Mm , 2- Pc Pouches With Free Rotating Lockring Mechanism With Filter And Velcro Clamp Integrated In The Bag.Size 70Mm , 20X20cm Flexible Self Adhesive Protective Sheet To Prevent Excoriation Size 20X20 Cm , 29 G, 90 Mm Whitacare Spinal Needle , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Cura Guard Adhesive , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Cura Guard Adhesive , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Cura Guard Adhesive , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Double Layer Of Adhesive Size 40Mm , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Double Layer Of Adhesive Size 50Mm , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Double Layer Of Adhesive Size 60 Mm , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Double Layer Of Adhesive Size 70Mm , 3 Fr, 6 Cm Double Lumen Paediatric Central Line With Nitinol Guide Wire , A- Trup Loop Karlstoz Set Yellow Code-24 French B- Coding Nife Yellod Code C- Cold Knife With 20F Sheath , Abdominal Binder- Extra Large , Abdominal Binder-Large , Abdominal Binder-Medium , Abdominal Binder-Small , Abdominal Drain Set No- 16 , Abdominal Drain Set No- 24 , Abdominal Drain Set No- 28 , Abdominal Drain Set No- 30 , Abdominal Drain Set No- 32 , Abg Test Card , Above Knee Plaster Slab , Absorbable Gelatin Sponge , Absorbent Cotton Wool Net 500 Gm. Roll , Absorbent Powder For Covering Excoriated/Damaged Skin Around Stoma.,Size 25 Gm , Adhasive Plaster 10 Cmx 5Mtr Roll , Adhasive Plaster 7.5Cmx 10 Mtr Roll , Adult Epidural Set With 19 G Soft Polyurethane Epidural Catheter To Prevent Dura Puncture, 17 G/90 Mm Touhy Needle, .22 Micron Filter And Lor Syringe , Advanced Rf Energy Hand Instruments Of 12Mm Shaft Diameter For Open Procedures With Shaft Lengths 22Cm And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm With 55 Degree Articulation And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm With 55 Degree Articulation And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 45Cm And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 45Cm And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedures With Shaft Lengths 14Cm And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedures With Shaft Lengths 14Cm And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedures With Shaft Lengths 25Cm And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedures With Shaft Lengths 25Cm And Should Be Both Hand & Foot Activated. , Air Bed For Pressure Sore Alternate Ripell , Airway Guided Vedio Intubation For Single Patient Use, Ett Size- 7.0-8.5, 6.0-7.5, 4.0-5.5 & 2.5-3.5 , Airway Reusable Optic (Minimum 50 Intubation) ,With Two Size Disposable Blade, With Docking Station For Recharge Battery And Displays Service Life , Airway Tube All Size , Airway Visualization System (Adult)-Display Monitor With Video Output Capability. Work On Aaa Consumable Batteries & Runs Continuously Up To 90 Mints. Can Work On Reusable Batteries Too If Required, Anti Fog Lens With White Led Light Source, Supplied With 3Pcs Of Size 3 Channeled And 1 Pc Of Size 3 Non-Channeled Blades, 510 K , Iso & Ce Certified. , Ambu Bag Self Inflawin Bage Size Adult Made Of Silicone Material And Autoclavable , Ambu Bag Self Inflawin Bage Size Neonatel Made Of Silicone Material And Autoclavable , Ambu Bag Self Inflawin Bage Size Peadiartic Made Of Silicone Material And Autoclavable , Armored Tube Made Of 100% Silicon, Radio Opaque, Mounted Connector, Pilot Balloon With Universal Port. , Artificial Kidney 0.8 Meter Square , Artificial Kidney 1.2 Meter Square , Asepto Syringe , B.P.Instrument Mercurial Isi Marked , B.P.Instrument Stand Model Isi Marked , Babcock- Laparoscopic 10Mm A Traumatic Babcock, Straight 360 Degree Rotating With Insulated Shaft, A Traumatic Jaws With Ratchet Mechanism, Plastic Grip, 36 Cms Length, Independently Moving Jaws , Babcock- Laparoscopic 5Mm A Traumatic Babcock, Straight 360 Degree Rotating With Insulated Shaft, A Traumatic Jaws With Ratchet Mechanism, Plastic Grip, 36 Cms Length, Independently Moving Jaws , Baby Diaper (Napee Pad) For 3 To 8 Kg. Chield , Bacteria Filter , Bain Circuit Adult. , Bain Circuit Paed. , Bed Pan Stainless Steel , Below Knee Plaster Slab , Bioabsorbable& Biocompatible Highly Porous & Sponge Based Adhesion Free Wound Dressing For Sinu-Nasal Cavity Size 8Cm X 2Cm , Blood Administration (Transfussion)Set , Breast Tissue Marker With Both Front Trigger And An Alternate Rear Trigger To Accommodate User Preference. Available With Two Unique Shapes With Permanent Ultrasound Enhancement Color-Coded Triggers Identify Different Marker Shapes. 17G*10Cm , Broad Spectrum Antibacterial Double And Triple Lumen Polyurethane Hd Catheter,Catheter And Extension Line Along With Hub Should Be Impregnated With Chlorhexidine And Silversulfadizine Kit Should Contain- Fr-12, L-16Cm. With J Guide Wire, Rollerson Syringe, Dilator, Scalpel. Needle Free Cannula, Transduction Probe,Catheter Stabilization Device. , Broad Spectrum Antimicrobial Double And Triple Lumen Polyurethane Cvc Catheter Kit, Catheter And Extension Line Along With Hub Should Be Impregnated With Chlorhexidine And Silversulfadizine Kit Should Contain- Fr-7, G-14X18, L-16Cm.With J Guide Wire, Rollerson, Syringe, Dilator, Scalpel. Needle Free Cannula Transduction Probe, Catheter Stabilization Device. , Brush Biopsy Kit , Buprenorphine Patch 10Mg , Buprenorphine Patch 20Mg. , Buprenorphine Patch 5Mg, , Calcium Phosphate Cement , Cannula Fixer Set Consumable , Cannulaide Hydrocolloid Dressing With 2 Velcro Strips , Carbon Activated Filtroder Filter To Prevent Bad Odour And Ballooning Of Bag , Catheter Stabilization Device With Medical Grade Pvc Clamp Should Have Chlorhexidine Sterilizing Swab And Id Tag (Large And Medium) , Ccnpwt Canister 500 Ml With Aqua Gel , Ccnpwt Large Pu Foam Dressing Kit Size- 26Cm X 15Cm X 3.3 Cm , Ccnpwt Medium Pu Foam Dressing Kit Size- 18 Cm X12.5 Cm X 3.3Mm , Central Line Double Lumen , Central Line Single Lumen , Central Line Triple Lumen , Central Lines 28G (Polyurethane) 30 Cm Length, Single Lumen , Cervical Collar Hard , Cervical Collar Soft , Chest Catheter No.20,24,26,32,36 , Chest Drain No.28 , Chest Drain No.32 , Chiba Needle Long , Chlorhexidine Acetate Dressing Pad Size 10X10 , Chlorhexidine Acetate Dressing Pad Size 10X30 , Chlorhexidine Acetate Dressing Pad Size 6X6 , Clavicle Brace , Cling Film Wrape Bio-Degradable 12In&200M , Clip Applier- Laparoscopic 10 Mm Reusable Ligaclip Medium/Large Size Applier With Clip Retention Grooves In The Jaw With Single Arm Movement, 36Cm Metal Shaft , Clip Applier-Laparoscopic 10/12 Mm Reusable Ligaclip Large Size Applier With Clip Retention Grooves In The Jaw With Single Arm Movement, 36Cm Metal Shaft , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Large 26Cmx16cmx3mm Nanocrystalline Silver Non Adherent Wound Contact Layer Track Pad Transparent Pu Drape Film Wound Measuring Scale , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Medium 18Cmx13cmx3mm Nanocrystalline Silver Non Adherent Wound Contact Layer Track Pad Transparent Pu Drape Film Wound Measuring Scale , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Small 10Cmx8cmx3mm Nanocrystalline Silver Non Adherent Wound Contact Layer Track Pad Transparent Pu Drape Film Wound Measuring Scale , Closed System Device With Tko Valve To Control Bi-Directional Flow Of Infusate Working At 7Psi Withdrawal Pressure , Closed Ventilator Suction Catheter 14 Fr , Codon Set , Collagen Dry Sheet 10X10 Cm Sheet , Collagen Dry Sheet 15X30 Cm Sheet , Collagen Dry Sheet 20X40 Cm Sheet , Collagen Dry Sheet 6X6 Cm Sheet , Collagen Granules , Collagen Wet Sheet 10X10 Cm Sheet , Collagen Wet Sheet 15X30 Cm Sheet , Collagen Wet Sheet 20X40 Cm Sheet , Collagen Wet Sheet 6X6 Cm Sheet , Complete Absorbable Mesh Fixation Device With Minimum Strap Length 7.0 Mm 2 Point Fixation To Hold The Mesh And Device Should Be Of 25 Absorbable Straps. , Concentric Needles. , Condom Catheter , Conical Nitinol Ivc Filters Available In Both Femoral & Jugular Sets With 0.035 Guidewire Comptibility With Radiopaque Marker Bands With Pusher Pads And Pusher Wire/Gripper With Filter Retrieval Set. , Consumable For Fibreless Video Scope, Should Have Suction Port & Oxygen Delivery Port, Should Be Usfda, Compatible With A-View Monitor Of Size 8.5 Inches With 8 Gb Memory. Sizes- Diameter 1.2Mm, 2.2Mm & 2.8 Mm , Control Syringe , Coronary Diagnostic Catheter Amplatz Left -1, 5F , Coronary Diagnostic Catheter Amplatz Left -1, 6F , Coronary Diagnostic Catheter Amplatz Left -2, 5F , Coronary Diagnostic Catheter Amplatz Left-2, 6F , Coronary Diagnostic Catheter Amplatz Right-1, 5F , Coronary Diagnostic Catheter Amplatz Right-1, 6F , Coronary Diagnostic Catheter Amplatz Right-2, 5F , Coronary Diagnostic Catheter Amplatz Right-2, 6F , Coronary Diagnostic Catheter Bypass 6F , Coronary Diagnostic Catheter Judkins Left 3.0, 5F , Coronary Diagnostic Catheter Judkins Left 3.0, 6F , Coronary Diagnostic Catheter Judkins Left 3.5, 5F , Coronary Diagnostic Catheter Judkins Left 3.5, 6F , Coronary Diagnostic Catheter Judkins Left 4.0, 5F , Coronary Diagnostic Catheter Judkins Left 4.0, 6F , Coronary Diagnostic Catheter Judkins Left 4.5, 5F , Coronary Diagnostic Catheter Judkins Left 4.5, 6F , Coronary Diagnostic Catheter Judkins Left 5.0, 5F , Coronary Diagnostic Catheter Judkins Left 5.0, 6F , Coronary Diagnostic Catheter Judkins Right 3.0, 5F , Coronary Diagnostic Catheter Judkins Right 3.0, 6F , Coronary Diagnostic Catheter Judkins Right 3.5, 5F , Coronary Diagnostic Catheter Judkins Right 3.5, 6F , Coronary Diagnostic Catheter Judkins Right 4.0, 5F , Coronary Diagnostic Catheter Judkins Right 4.0, 6F , Coronary Diagnostic Catheter Judkins Right 4.5, 5F , Coronary Diagnostic Catheter Judkins Right 4.5, 6F , Coronary Diagnostic Catheter Judkins Right 5.0, 5F , Coronary Diagnostic Catheter Judkins Right 5.0, 6F , Coronary Diagnostic Catheter Lima 6F , Coronary Diagnostic Catheter Tiger 5F , Coronary Diagnostic Catheter Tiger 6F , Corrugated Drin , Cotton Crape Bandage 10 Cm X 4 Mtr. , Cotton Crape Bandage 15 Cm X 4 Mtr. , Cotton Crape Bandage 5 Cm X 4 Mtr. , Cpap Kit And Nebulizer (Without Mask) Contains: - 1 Cpap Device And Manometer Connector - 1 Nebulizer. , Crammer Wire Splint , Crescent Knife , Cuffed Fenestrated Tracheostomy Tube , Cuffed Fenestrated Tracheostomy Tube Kit With Speaking Valve(Orator Kit) , Curved Scissors- Laparoscopic 5Mm Size, 360 Degree Rotating With Insulated Shaft, Non Ratchet , Plastic Grip, 36 Cms Length, Monopolar Pin Provision For Usage With Electro Surgical Unit, Independently Moving Jaws , Cvp Cannula Double Lumen 7F , Dental X-Ray Film 12”X15” (150 Sheet Pkt.) , Dexamethasone Intravitreal Implant , Diagnostic Catheter Mpa-1 5F , Diagnostic Catheter Mpa-1 6F , Diagnostic Catheter Mpa-2 5F , Diagnostic Catheter Mpa-2 6F , Diagnostic Catheter Pigtail 5F , Diagnostic Catheter Swanganz 5F , Diagnostic Catheter Swanganz 6F , Diclofenac Patch , Digital Thermameter , Disposable Adis Kit , Disposable Amniotic Fluid Collection Spillage Free Sac. , Disposable Cap , Disposable Cassettes For Alcon Phacoemulsification , Disposable Drapes Set , Disposable Eye Shield Protector Against U/V Light For Infant And Neonates.Sterilized Single Pack , Disposable Gown , Disposable High Absorbent Lscs Drape Sheath With Self Adherent Incisional Window , Disposable L.M.A. Pro-Seal Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. , Disposable Laparoscopy Bladeless Trocar With Inbuilt Silicon Reducer And Co2 Port , Disposable Needle 18G, 20G, 22G. 23G, 24G (Single Use) , Disposable Omnidrapes , Disposable Patient Body Cover With Six Holders, Weight Bearing Capacity > 125 Kgs. , Disposable Scalp Vein Set Size 18G, 20G, 22G, 23G, 24G , Disposable Spinal Needle 18,22,23,25 , Disposable Suction Catheter Size 12,14, 16 , Disposable Suction Catheter Black All Size , Disposable Suction Catheter Size 6,7,8,10, , Disposable Track (Nephrostomy)Dilator (12 No.) 8 To 30 , Disposable Tripon Forcep For Stone Extraction Used With Nephro/Ureterorenoscope , Disposable Trucut Gun Forcep-18&20 Guage , Dissecting Hook Having Telescoping Shaft (10Cm-14Cm) With Integrated Hand Activation Control Buttons. , Dissecting Hook Having Telescoping Shaft (10Cm-14Cm) With Integrated Hand Activation Control Buttons. , Dissecting Hook Having Telescoping Shaft (10Cm-14Cm) With Integrated Hand Activation Control Buttons. , Double Compartment Flutter Valve For Heamothorax , Double Layer Acrylic Adhesive Skin Attachment Stabilization And Securement Device For Anchoring Percutaneous Cvc Catheters 5Cm*9Cm , Double Luman Catheter (Kit) , Double Luman Cathetercurve Kit Paed. Size 8.0 Fr.10 Cm , Double Lumen Cuffed Tracheostomy Tube Kit , Double Lumen Tubes For One Lung Ventilation 37 Fr, 39 Fr Each For Leeft And Right Side , Drainage Catheter Pigtail External Internal 8F,10F,12F,14F,16F And Length 35Cm. , Dressing Dres. Drum Stainles Steel Size 13”X15 , Dressing Drum Stainles Steel Size 11”X11” , Dressing Drum Stainles Steel Size 12”X10” , Dressing Drum Stainles Steel Size 12”X12” , Dressing Drum Stainles Steel Size 9”X9” , Dry Amniotic Memebrane (Preserved) , Dura Patch 10X12(G.Patch) , Dura Patch 8X10 (G.Patch) , E.C.G.Roll Multi Channal , E.C.G.Roll Single Channal , Ecg Disposaable Electrode 40Mm Diaround Endopyelotomy Stent-10,12,14 , Ecg Electrodes With Offset Connector. Should Have Highly Conductive Wet Gel, Combination Of Instant And Long-Term Adhesives, Breathable Micro Porous Material, Special Soft Sponge, Offset Connector Concept, High-Quality Ag/Agcl Sensor. , Ecg Probes Leads , Elastic Adhesive Tape 10 Cm ,1 Meter , Elastic Adhesive Tape 10 Cm ,4”X6 Meter , Electro Neuro Stimulator Needle For Plexus And Peripheral Nerve Blocks With Detachable Extension Line 50Cm, G-20/21/23, L-35/50/100/150 Mm. , Emergency Cpap Kit Kit Designed For Use In Emergency Situations (Pre-Hospital Care). Kit Containing:- 2 Cpap Devices , 1 Adult Mask (Small) ,1 Adult Mask (Medium), 1 Adult Mask (Large) , 1 Silicone Arness, 1 Cpap Manometer, 1 Manometer Attachment Cord, 1 Oxygen Flowmeter Code (Complies With Bsi Standard) 1 X 20 Ml Syringe To Inflate Cushion, 1 Nebulizer, 1 Fio2 Device , Endo Applicator- Matt Finishing Stainless Steel Applier, With Us Fda Approved Sizes- A- 32.5Cm For Ml/ L/ Xl B- 45Cm For Ml/ L/ Xl , Endotracheal Tube Elastomer Silicon Coated Phthallate Free Plain Size 2.5 To 5 , Endotracheal Tube Elastomer Silicon Coated Phthallate Free, Cuffed Size 5 – 9 , Endotracheal Tube With Sub-Glottic Suction Port 10.0Mm , Endotracheal Tube With Sub-Glottic Suction Port 6.0Mm , Endotracheal Tube With Sub-Glottic Suction Port 7.0Mm , Endotracheal Tube With Sub-Glottic Suction Port 7.5Mm , Endotracheal Tube With Sub-Glottic Suction Port 8.0Mm , Endotracheal Tube With Sub-Glottic Suction Port 8.5 Mm , Endotracheal Tube With Sub-Glottic Suction Port 9.0 Mm , Endotracheal Tubes Cuffed Size 6 , 6.5, 7, 7.5, 8 , Endotracheal Tubes Size 2.5, 3, 3.5, 4, 4.5 , Endotracheal Tubes Size 5, 5.5,6, 6.5,7, 7.5,8, 8.5, 9, 9.5, , Epidural Cather System 1 , Epidural Catheter 16& 18 , Epidural Needle 16& 18 , Epimatic Lor Syringe With Precallibarated Pressure Band , Equalizer Baloon And Swan -Ganz Catheter , Eto Cartridge , Face Mask For Cpap Device - Sizes 0,1,2,3,4 , Feeding Tube N0.5, 6, 7, 8 Fr , Femoral Arterial Catheter With Guide Wire • Should Have Pe Material To Prevent Dampning • Should Have Visualization Chamber For Arterial Puncture Confirmation • One Way Valve Introducer To Avoid Excessive Blood Loss • 18 G/10 Cm Pe Catheter With Introducer Needle And Guidewire , Femoral Caheter Paed. Size 11 Cm , Femoral Caheter Single , Femoral Catheter Double , Femoral Sheath 6 F , Femoral Sheath 7 F , Fentanyl Patch , Fiberglass Cast Tape 10Inch , Fiberglass Cast Tape 4 Inch , Fiberglass Cast Tape 6 Inch , Fibreless Video Scope, Compatible With A-View Monitor Of Size 8.5 Inches With 8 Gb Memory Should Be Usfda. , Filliform Dougies Female-6,8,10,12,14,16,18,20 , Filliform Dougies Male-3,4,5,6 , First Puncture Needle-16,18G , Fistula & Wound Management System Size 104-159Mm , Fistula & Wound Management System Size 156-228Mm , Fistula & Wound Management System Size 208-297Mm , Fistulla Needle 16 No. , Flexometalic Tube Size 5, 7, 8.5 , Flexometallic Endotracheal Tube Size 6.5, 7, 7.5, 8, 8.5 , Flodable Iol 20D, 21D, 22D, And 23D, 24D, 25D, 26D , Floseal 10M.L. Vhsd Kit - Flowable Heamostatic Gelatin Thrombin Matrixcontains Thrombin Human – 5000 Iu/10 M.L., 10M.L. Prefilled Syringe Containing Gelatin Matrix, 2 Vial Of Calcium Chloride 5M.L., Syringe With Luer Connector & Plastic Bowl For Thrombin. , Floseal 5M.L. Vhsd Kit - Flowable Heamostatic Gelatin Thrombin Matrixcontains Thrombin Human – 2500 Iu/5 M.L., 5M.L. Prefilled Syringe Containing Gelatin Matrix, 1 Vial Of Calcium Chloride 5M.L., Syringe With Luer Connector & Plastic Bowl For Thrombin. , Flow Sensor , Foldable Hydrophilic Acrylic Lens 15D , Foldable Hydrophilic Acrylic Lens 16D , Foldable Hydrophilic Acrylic Lens 17.5D , Foldable Hydrophilic Acrylic Lens 17D , Foldable Hydrophilic Acrylic Lens 18.5D , Foldable Hydrophilic Acrylic Lens 18D , Foldable Hydrophilic Acrylic Lens 19.5D , Foldable Hydrophilic Acrylic Lens 19D , Foldable Hydrophilic Acrylic Lens 20.5D , Foldable Hydrophilic Acrylic Lens 21.5D , Foldable Hydrophilic Acrylic Lens 22.5D , Foley Balloon Catheter Three Way(A) Fg 16,18,20,22 , Foley’S Catheter No. 12,14,16,18,20,22,24 , Foley’S Catheter No. 14 , 16, 18,Two Way , Foley’S Catheter No. 8,10 , Frazier Ventricular Needle , Gamjee Roll 4 3Meter , Gamjee Roll 6 3Meter+B1190 , Gifli Saw Wire , Gluco Meter , Gluco Meter (1X50 Strip) , Gluco Meter Strip (1X100 Strip) , Grasper- Laparoscopic 5Mm Straight 360 Degree Rotating With Insulated Shaft, Toothed A Traumatic Grasper With Ratchet Mechanism, Plastic Grip, 36 Cms Length, Independently Moving Jaws , Guide Wire 0.33, 0.35, 0.38 , Guiding Catheter Ebu 3.0 6F , Guiding Catheter Ebu 3.0 7F , Guiding Catheter Ebu 3.5 6F , Guiding Catheter Ebu 3.5 7F , Guiding Catheter Ebu 4.0 6F , Guiding Catheter Ebu 4.0 7F , Guiding Catheter Ebu 4.5 6F , Guiding Catheter Ebu 4.5 7F , Guiding Catheter Judkins Left 3.0 6F , Guiding Catheter Judkins Left 3.0 7F , Guiding Catheter Judkins Left 3.5 6F , Guiding Catheter Judkins Left 3.5 7F , Guiding Catheter Judkins Left 4.0 6F , Guiding Catheter Judkins Left 4.0 7F , Guiding Catheter Judkins Left 4.5 6F , Guiding Catheter Judkins Left 4.5 7F , Guiding Catheter Judkins Right 3.0 6F , Guiding Catheter Judkins Right 3.0 7F , Guiding Catheter Judkins Right 3.5 6F , Guiding Catheter Judkins Right 3.5 7F , Guiding Catheter Judkins Right 4.0 6F , Guiding Catheter Judkins Right 4.0 7F , Guiding Catheter Judkins Right 4.5 6F , Guiding Catheter Judkins Right 4.5 7F , Haemorrhoid Band , Handpiece (Blue) , Handpiece (Transducer) , Hard Cervical Collar , Heated Bubble Cpap Circuit 12Mm With Pt Wye ,Water Trap,L Shape Pmo Line, Knob Type Bubble Generator, Pressure Release Safety Manifold ,Autofeed Humidification Chamber, Ventilation Adaptors ,Must Be Compatible With Interface System Approved By Department (Sample Approval As By Department) , Heater Wire Adaptor For Humidifier , Hernia System , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma Silicon Elastomer Coated– 2 Way , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma. Silicon Elastomer Coated – 3 Way , Hudson Type Prongs (Colour Coded Bonnets With 20Mm* 2 Strips Velcro Strip Around The Head)+ Soft Anatomical Silicone Prongs , Hydrocolloid Dressing Semi-Permeable, Water Proof Dressing With High Absorption Efficiency. Dressing Has Grid To Measure The Size Of Wound. Size 10Cmx10cm , Hydrocolloid Dressing Semi-Permeable, Water Proof Dressing With High Absorption Efficiency. Dressing Has Grid To Measure The Size Of Wound. Size 15Cmx15cm , Hydrocolloid Dressing Semi-Permeable, Water Proof Dressing With High Absorption Efficiency. Dressing Has Grid To Measure The Size Of Wound. Size 20Cmx20cm , Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S/L. Ce Certified. , Hydrophobic Guide Wire 0.032X150cm , Hydrophobic Guide Wire 0.035X150cm , Hydrophobic Guide Wire 0.038X150cm , Impregnated Vascular Hemostatic Pec Porous Sponge For Control Of Traumatic Arterial & Venous Bleeding. Effective On Patient On Anticoagulants. Size 5Cm X 5Cm & Size 7Cm X 7Cm , Incise Drape Mini 10X10 Cm , Incise Minidrap Disposable Needle Size 26.5 , Infant Cpap Interface With Bonnet With 20Mm*1 Sets Of Strips +8Mm* 30Cm 1 Integrated Dual Strip. , Infant Cpap Interface With Bonnet With 20Mm*1 Sets Of Strips +8Mm* 30Cm 1 Integrated Dual Strip+Anatomical Nasal Mask+ Nasal Dual Tube With Pressure Monitoring Provision For Ventilator . , Infent Feeding Tube Size Fg 5 To 8 , Infent Feeding Tube Size Fg 9 To 10 , Infusion Set With Airvent (Single Use) , Inrtoducer Needle , Insulin Pen Needle 32G (4Mm) Packing 100 Units. , Insulin Syringe 1 Ml , Intensive Spirometer , Intercostal Chest Drain (Icd) Bag , Intra Venous Fixation Device , Intracath Dusar Needle No. 16 , Irrigation Set , Iv Cannula With Injection Valve Size 18 , Iv Cannula With Injection Valve Size 20 , Iv Cannula With Injection Valve Size 22 , Iv Cannula With Injection Valve Size 24 , Iv Regulator Set , J.R.Circuit , Jamshidi Bone Marrow Biopsy/ Aspiration Needle. Should Have Lightweight Handle With Built-In Comfort Knob. Should Have Bevel Tip For Easy Coring Of Bone. Should Have Bevel Cannula Tip. Should Have Tapered Distal Cannula For Easy Recovery Of Sample. Should Be Us Fda Approved.8G*4, 11G*4, 11G*6, 13G*2, 13G*3.5 , K Wirw 1.5 Inch ( 6 Inch Long Ss) , K Wirw 2 Inch ( 6 Inch Long Ss) , K-90 Catheter , Kerotama Knife , Kher,S T-Tube No.12 , Knee Brace-Hinge , Knee Brace-Rigid , Lance Tip , Laryngoscope Infant With Straight Blade And Spare Blue Ce/Iso/Fda Apporoved , Laryngoscope With Four Blades(Infant) Adult Normal Size&Extralarge Complete With Spare Blue & Batteries Ce/Iso/Fda Apporoved , Laryngoscope With Four Blades(Infant) Paediatric Normal Size&Extralarge Complete With Spare Blue & Batteries Ce/Iso/Fda Apporoved , Latex Free Porous & Permeable Elastic Adhesive Bandage 15 Cm , Leur Lock Syringe X 10Ml , Long Term I V Catheter With Introducer And Integral Hub Protector Device Integrated With 70% Isopropyl Alcohol. , Low Adherent Absorbent Wound Dressing With A Polyester Perforated Wound Contact Layer Size 50Cmx7mtr Roll , Lumber Drainage Catheter , Lumbo Sacral Belt Medium , Makintosh Rubber Sheet Isi Mark , Malecott’Scatheter N0. 28 , Malecott’Scatheter N0. 30 , Malecott’Scatheter N0. 32 , Malicot Rubber Catheter No.12/15/16/18/20/22/24/ , Manual Resuscitators With Built In Pressure Limitation – Adult Withface Mask Of Size 3/4 & 5,O2 Tidal Volume 1300 Ml, Reservoir Volume 1500 Ml; 100% Latex Free & Double Layered. Built-In- Pressure Limitation, Single Shutter Valve, Integrated Hand Strap, Autoclavable, Provision To Attach Peep Valve. Us Fda, Ce & Iso Certified. , Manual Resuscitators With Built In Pressure Limitation – Pediatric/Neonatewith Face Mask Of Size 0 & 2 Max. Tidal Volume - 300 Ml; Volume Of O2 Reservoir - 1500 Ml/Volume 100% Latex Free Outer Cover & Double Layered. Single Shutter Valve, Integrated Hand Strap, Autoclavable, Pressure-Limiting Valve ,Provision To Attach Pressure Manometer, Usfda ,Ce & Iso Certified. , Maryland Dissector- Laparoscopic 5Mm Curved Maryland Dissector With Tapering End, 360 Degree Rotating With Insulated Shaft, Non Ratchet , Plastic Grip, 36 Cms Length, Monopolar Pin Provision For Usage With Electro Surgical Unit, Independently Moving Jaws , Mask N-95 , Medtronic Sheath 6F , Melicot Catheter No.12,14,18,20,22,24 , Micro Drip Set With Chamber (Paedia) , Micro Titanium Ligation Device With Locking Mechanism, Sterile, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. , Micropore 1.5” X 9 Meter , Micropore 1” X 9 Meter , Micropore 2” X 9 Meter , Micropore 3” X 9 Meter , Micropore 4” X 9 Meter , Micropore 5” X 9 Meter , Micropore 6” X 9 Meter , Microporous Antimicrobial Fabric Tape All Size , Milecot Drain Size 6,8,10 , Mini Suction Drain , Mucus Extator , Multifunctional Mask With The Attachment Of Nebulizer Mask, Venture Mask, Oxygen Mask, Cpap, And Bipap With 7” Oxygen Two Tube. Fda Approved. (Paediatric/ Adult) , Naasal Prong (Neonates) , Nebulazation Mask Set , Needle Holder- Laparoscopic 5Mm Straight Reusable Needle Holder With Ratchet Mechanism With High Quality Tungsten Plated Jaws For Enhanced Needle Grip, 36 Cms Metal Shaft. , Negative Suction Drain , Newborn Trocar For Neumothorax 8Fr/10Fr , Nitrous Oxide Mox Regulator Double Meter With Connecatation Pipe Body: Brass, Spring: Stainless Steel, Diaphragm: Rubber, Pressure Gauge: 0-250 Kg/Cm2] Pre-Set Regulator Up To 60 Psi , Nitrous Oxide Regulator Single Meter With Connecatation Pipe , Non Drying Malleable Non-Alcohol Ostomy Paste For Filling And Sealing Uneven Surface Stoma For Excoriated/Tender Skin.Size 6 Gm , Ointment Containing Centella Asiatica Extract: Nlt 0.6% With Sliver Oxide: 1.2% & Silk Extract 8% : 46% 50 Gm Jar , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved. Sizes- 6” And 8” , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved. Sizes- A- 8 Inch In Size With Curved For Ml/ L/ Xl. B- 11 Inch In Size With Right Angle 70° , Opsite Dressing 15X28 , Opsite Dressing 30X28 , Oropharyngeal Airway Size 1 , Oropharyngeal Airway Size 2 , Oropharyngeal Airway Size 3 , Oropharyngeal Airway Size 4 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures Size 1X 2Approved By Us Fda , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures Size 2X 4Approved By Us Fda , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures Size 4X 4Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 1X1 Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 1X3.5Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 3X 4Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 6X 9Approved By Us Fda , Oxygen Catheter , Oxygen Flow Meter Single Meter With Connection Pipe (Isi Mark) , Oxygen Mask Transparent Adult/ Peadiatric , Oxygen Mox Regulator Double Meter With Connecatation Pipe Body: Brass, Spring: Stainless Steel, Diaphragm: Rubber, Pressure Gauge: 0-250 Kg/Cm2] Pre-Set Regulator Up To 60 Psi , Oxygen Sensor , Paediatric Epidural Set(With 19G Needle) With Matle Stylet 22G Catheter0.22 Micron Epidural Catheter And Syringes , Partial Ossicular Reconstruction Prosthesis , Patient Identification Band Adult , Patient Identification Band Child , Pec Hemostatic Patch For Post Renal Dialysis Size 5Cm X 7Cm , Pediatric /Neonatal Heated Breathing Circuit 12 Mm With Pt Wye ,Water Trap,L Shape Pmo Line,Flow Restrictor ,Autofeed Humidification Chamber, Ventilation Adaptors,Must Be Compatible With Interface System. , Percutaneous Surgical With Minilap System- A Manual Instruments For Direct Introduction To Surgical Site Without Need For Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A- Alligator Thumb Grip Graspers (2.3Mm) B- Clutch Thumb Grip Graspers (2.3Mm) C- Babcock Thumb Grip Graspers (2.3Mm) D- Bowel Thumb Grip Graspers (2.3Mm) , Percutaneous Surgical With Monopolar System- Direct Introduction To Surgical Site Without Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A-Curved Spatula Probes (2.4Mm) B-Straight Spatula Probes (2.4Mm) C-Hook Probes (2.4Mm) D-Conical Probes (2.4Mm) , Percutaneus Transhepatic Bibiary Drainage Catheter No.10F , Percutaneus Transhepatic Bibiary Drainage Catheter No.12F , Percutaneus Transhepatic Bibiary Drainage Catheter No.6F , Percutaneus Transhepatic Bibiary Drainage Catheter No.8F , Peritonial Dialysis Catheter Adult , Peritonial Dialysis Catheter Peadiatric , Peritonial Dialysis Infusion Set , Peritonial Dialysis Introducer Needle 14 No. , Pft Filter , Phacoemulsification Sleeve , Phacoemulsification Tubings , Pistol Grip Curved Coagulating Shears Ergonomic Handle With Att,Shaft Lengths 36Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter , Pistol Grip Curved Coagulating Shears With Ergonomic Handle In The Following Shaft Lengths 23 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att. , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter. , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 45 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter. , Plaster Of Paris Bandage 10Cm X 2.7Mtr / Roll , Plaster Of Paris Bandage 15Cm X 2.7Mtr / Roll , Plaster Of Paris Powder For Medical Use 5Kg Pack , Pmma Pciol 18D , Pmma Pciol 19.5D , Pmma Pciol 19D , Pmma Pciol 20.5D , Pmma Pciol 20D , Pmma Pciol 21.5D , Pmma Pciol 21D , Pmma Pciol 22.5D , Pmma Pciol 22D , Pmma Pciol 23.5D , Pmma Pciol 23D , Pmma Pciol 24D , Polymer Ligation Device With Locking Mechanism, Sterile, Radiolucent Property, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. Sizes- A- Medium Large Polymer Ligation Device. B- Large Ligation Device. C- Extra Large Ligation Device. , Polymyxin B Sulphate Bp 10000 I.U Chloramphenicol Ip 10 Mg Dexamethasone Sodium Phosphate Ip 1 Mg In A Sterile Base Q.S 5 Gm Tube , Polymyxin B Sulphate Bp 10000 I.U Chloramphenicol Ip 10 Mg In A Sterile Base Q.S 5 Gm Tube , Post Operative Bag With Window Size 70Mm , Post Operative Bag With Window Size100mm , Postpartum Hemorrhage Balloon Silicon Catheter For Management Of Pph. Size- 24Fr, Length- 54Cm,Balloon Capacity-500Ml, , Powder For Surgical Gloves 400 Gm Pkt. , Ppe Kit , Prefilled Humidifier Bottle- Micro Diffuser That Produces Smaller Bubbles And Greater Surface Agitation, Reservoir Bottle Have Built In Oxygen Tubing Connector, Adapter Audible Alarm System Alerts Clinician Of Flow Restriction Of Oxygen Cannula Or Mask Tubing. Individually Packaged, Easy Snap Off Trigger Design. Fda Approved. , Pressure Line 150Cm , Proctoscope Disposable , Ptbd Internal External Long Pigtail Catheter 8F And 10F. , Ptca Wire Ahasi Fielder Fc 0.014 X180cm , Ptca Wire Ahasi Fielder Xt 0.014 X180cm , Ptca Wire Ahasi Sion Blue 0.014X180cm , Ptca Wire Bmw 0.014X190cm , Ptca Wire Cross It 100Xt X190cm , Ptca Wire Cross It 200Xt X190cm , Ptca Wire Pilot 150 0.014X190cm , Ptca Wire Pilot 50 0.014X190cm , Ptca Wire Whisper Ms Bmw 0.0140.014X190cm , Radial Arterial Catheter With Guide Wire • Should Have Pe Material To Prevent Dampning • Should Have Visualization Chamber For Arterial Puncture Confirmation • One Way Valve Introducer To Avoid Excessive Blood Loss • 20 G/8 Cm Pe Catheter With Introducer Needle And Guidewire , Radial Puncture Needle Jelco 20G , Radial Sheath 5 F , Radial Sheath 6 F , Radiation Protection Device Lead Apron Large Size , Radiation Protection Device Lead Apron Medium Size , Radiation Protection Device Lead Apron Small Size , Radiation Protection Device Lead Apron With Coller Large Size , Radiation Protection Device Lead Apron With Coller Medium Size , Radiation Protection Device Lead Apron With Coller Small Size , Radiation Protection Screen 6X3 , Rae Preformed Tubes Made Of Pvc Size 4, 4.5, 5, 5.5 , Ram Cannula Blue , Ram Cannula Green , Ram Cannula White , Ram Cannula-Hfnc Cannula With Integrated Hydrocolloid Adhesive Sterile Pack With Bonnet Integration And Scale Sizing Guide. , Raney Scalp Clip Forceps , Rayle’S Tube No.14,16,18 , Rayle’S Tube No.20,22,24 , Rayle’S Tube No.8,10,12 , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection, Sizes- 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 Mm. , Reusable L.M.A. Pro-Seal Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. , Romodrain Size 12, 14, 16 , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 17 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter. , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 9 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter , Self Adhering Silicon External Catheter Should Be Built In Band Clear, Breathable, Odorless, Single Gama Sterilized, 100% Latex Free All Size , Semiautomatic Bioosy Gun (18G) With Co-Axial System (Mandatory) , Semi-Automatic Core Biopsy Instrument Set With 2 Throw Lengths Of 10Mm & 20Mm In A Single Device Along With A Throw Length Indicator Window And A Fire Ready Indicator Mark . Compatible Adjustable Coaxial And A Blunt Tip Stylet. 18G*10Cm , 18G*16Cm & 18G*20Cm , Semi-Automatic Core Biopsy Instrument Set With 2 Throw Lengths Of 10Mm & 20Mm In A Single Device Along With A Throw Length Indicator Window And A Fire Ready Indicator Mark . Compatible Adjustable Coaxial And A Blunt Tip Stylet. 20G*10Cm ,20G*16Cm, 20G*20Cm , Shielded Iv Catheter To Prevent Nsi , Short Iv Catheter With State Guide Wire 4Fr 2 G-22 , Short Iv Seldinger Catheter With Straight Guide Wire And Pur Catheter Without Extension G- 18,20 L-8,10 Cm , Should Have A Dual Hook For Zero Migration Post Deployment Should Have The Option Of Repositioning After Deployment Should Have Durable Twisted Wire Construction For Durability.20G*107Mm , Silicon Catheter Filling Port No. 8,10,12 , Silicon Catheter No.14, 16 , Silicon Cuffed Paediatric Tracheostomy Tube With V- Nack Flange , Silicon Harness For Cpap Kit , Silicon Suction Tubing , Silicon Tyre No.279 , Silicon Wrap Pulse Oxymeter, Spo2 Probes-Adult , Silicon Wrap Pulse Oxymeter, Spo2 Probes-Neonatal , Silicon Wrap Pulse Oxymeter, Spo2 Probes-Pediatric , Silicone Band No.240 , Silk Protein And Chitosan Composite Bilayered Non Absorbable Haemostatic Sponge Dressing With Backing Layer For Easy Peel 5X5 Cm , Silk Protein And Nanocrystalline Silver Based Sterile Water-Proof Transparent Pu Film Surgical Port Dressing With Adhesive Border And Center Non- Adherent Absorbent Layer 6X7cm , Silk Protein And Nanocrystalline Silver Based Sterile Water-Proof Transparent Pu Film Surgical Wound Dressing With Adhesive Border And Center Non- Adherent Absorbent Layer 10X25cm , Silk Protein And Nanosilver Based Microbicidal Sterile Surgical Wound Dressing Dusting Powder 100 Gm Bottle , Silver Impregnated Picc Catheter For Long Term Therapy 4Fr, 60 Cm Length Adjustable From Distal End , Single Handed Scalppal Blade Remover , Single Use Portable Negative Pressure Wound Therapy System With A Small Portable Sterile Pump Maintaining A Pressure Of 80Mm Of Hg (Nominal) +/- 20Mm Of Hg Size 10X20 Cm, 15X20 Cm , Skeletal Traction Kit , Skin Graftin Blade , Skin Traction Kit , Small Pu Foam Dressing Kit Size- 10Cm X7.5 Cmx3.3Mm , Soft And Gentle Adhesive For Sealing Area Around Stoma. Size 60 Gm , Soft Cervical Collar , Spring Loaded Automatic Biopsy Gun . One Handed Cocking Mechanism With Non-Roll Handle Design. Angled Sample Notch For Enhanced Needle Action. Choice Of Two Firing Buttons.14G*10 Cm & 14G*16 Cm , Spring Loaded Automatic Biopsy Gun . One Handed Cocking Mechanism With Non-Roll Handle Design. Angled Sample Notch For Enhanced Needle Action. Choice Of Two Firing Buttons.16G*10 Cm & 16G*16 Cm , Spring Loaded Automatic Biopsy Gun . One Handed Cocking Mechanism With Non-Roll Handle Design. Angled Sample Notch For Enhanced Needle Action. Choice Of Two Firing Buttons.18G*10Cm , 18G*16Cm & 18G*20Cm, 18G*25Cm , Spring Loaded Automatic Biopsy Gun . One Handed Cocking Mechanism With Non-Roll Handle Design. Angled Sample Notch For Enhanced Needle Action. Choice Of Two Firing Buttons.20G*10Cm ,20G*16Cm, 20G*20Cm , Sputum Vial , Stainless Steel Surgical Tray Size-Big , Stainless Steel Surgical Tray Size-Medium , Stainless Steel Surgical Tray Size-Small , Steem Inhalor , Stem Indigator 3 M , Stent For The Endonassal Dacrocystorhinostomy , Sterile Disposable Eye Drape, Sms Fabric , Sterile Dressing 4X6 , Sterile Fluorescein Strips , Sterile Hypoderic Syringes With Needle Capacity 10 Ml , Sterile Hypoderic Syringes With Needle Capacity 20 Ml , Sterile Hypoderic Syringes With Needle Capacity 50 Ml , Sterile Hypoderic Syringes With Needle Capacity 5Ml , Sterile Hypoderic Syringes Withneedle Capacity 2 Ml , Sterile Hypoderic Syringes Withneedle Capacity 3 Ml , Sterile Raney Scalp Clips , Sterile Schirmers Strips , Stiff Guide Wire 04 Pcnl 0.035Mm , Stimulating Catheter For Continuous Plexus And Peripheral Nerve Block. With Split Canula, Metallic Stylet, Antibacterial Filter, Electric Cable, Syringe, Dressing Film, Centimeter Catheter. G-18, L-35/50/85/120. , Sub Dermal Needles- For The Scalp. Should Made Up Of Stainless Steel The Tip Should Be Ultra-Sharp Lancet. , Suction Drain 14,16No , Suction Irrigation Pump Device With Npwt (Closed Suction Negative Suction Therapy) , Surgical Blade Size N0.10,11,12,15 Suitable For Fitting Handle No.3 , Surgical Blade Size N0.18,20,21,22,23,24,25 Suitable For Fitting Handle No.4 , Surgical Rubber Gloves Isi Mark Non Sterile Size N0. 6 , Surgical Rubber Gloves Isi Mark Non Sterile Size N0. 6 .5 , Surgical Rubber Gloves Isi Mark Non Sterile Size N0. 7 Pa , Surgical Rubber Gloves Isi Mark Non Sterile Size N0. 7.5 P , Surgical Rubber Gloves Isi Mark Non Sterile Size N0. 8 P , Surgical Rubber Gloves Isi Mark Non Sterile Size N0. 8.5 , Surgical Rubber Gloves Isi Mark Non Sterile Size N0. 8.5 P , Surgical Rubber Gloves Isi Mark Sterile Size N0. 6 , Surgical Rubber Gloves Isi Mark Sterile Size N0. 6.5 , Surgical Rubber Gloves Isi Mark Sterile Size N0. 7 , Surgical Rubber Gloves Isi Mark Sterile Size N0. 7.5 , Surgical Rubber Gloves Isi Mark Sterile Size N0. 8 , Sutureless Dural Graft Substitute 2X2 , Sutureless Dural Graft Substitute 3X3 , Sutureless Dural Graft Substitute 4X5 , Synthetic Cast (Fibar Glass) 10Cm, 15Cm , Synthetic Fibers Tape 4” , Syringe Pump Connectors , Tans Jugular Liver Biopsy Kit , Tape Sponge , Taylor S Brace , Temperature Probe For Humidifier , Temporary Pacing Catheter 6F , Teperature Probes For Warmer , Terniquit Set , Teurmo Hydrophillic Guide Wire 0.032X150cm , Teurmo Hydrophillic Guide Wire 0.032X260cm , Teurmo Hydrophillic Guide Wire 0.035X150cm , Teurmo Hydrophillic Guide Wire 0.035X260cm , Thomas Splint , Thre Layer Surgical Mask , Three Port Manifold , Three Way Extension For Tiva • Should Have Three 6 Cm Extension With One Non Return Valves Each • Should Allow To Infuse Hypnotic,Analgesia And Muscle Relaxant Together • Should Made Up Of Chemically Inert Polyurethane Material , Three Way Stop Cock , Threeway Cannula , Threeway Catheter No.22 , Thyroid Shield , Tisseel Lyophilized 2 M.L. Kit :Two Component Fibrin Sealant Having 1M.L. Human Fibrinogen + 1M.L. Human Thrombin, 1 M.L. Synthetic Aprotinin And Calcium Chloride With Duplojet System. , Tisseel Lyophilized 4M.L. Kit :Two Component Fibrin Sealant Having 2M.L. Human Fibrinogen + 2M.L. Human Thrombin, 2 M.L. Synthetic Aprotinin And Calcium Chloride With Duplojet System. , Total Ossicular Reconstruction Prosthesis , Touhy Borst Y Connector , Tracheostomy Tube With Cuff Size- 3.5, 4.0, 4.5, 5Mm , Tracheostomy Tube With Sub-Glottic Suction Port 10.0Mm , Tracheostomy Tube With Sub-Glottic Suction Port 6.0 , Tracheostomy Tube With Sub-Glottic Suction Port 7.0Mm , Tracheostomy Tube With Sub-Glottic Suction Port 7.5Mm , Tracheostomy Tube With Sub-Glottic Suction Port 8.0Mm , Tracheostomy Tube With Sub-Glottic Suction Port 8.5Mm , Tracheostomy Tube With Sub-Glottic Suction Port 9.0Mm , Triple Extention Needlefree Connecter With Two Non Return Valves To Prevent Back Tracking Of Infusate , Triple Layer Multipurpose Extension Tube, Inner Pe Layer Outer Pvc Layer, Withstanding 145 Psi Pressure , Triway , Trup Set , Tube Ex Changer And Insertion Aid In One Size 2.5, 6.0 , Tulle Grass Paraffin Gauze Dressing Sterile Leno Weave With Soft Paraffin Base. Size 15Cm*2Mtr , Tunneled Cuffed Catheter 19Cm , Tunneled Cuffed Catheter 21Cm , Two Ply Disposable Face Mask , Two Port Manifold , Umbical Cord Clamp-Plastic Material , Umbilical Catheter (Polyurethane) 3.5G, 4.0G, 4.5G, 5.0G , Uncuffed Fenestrated Tracheostomy Tube Kit , Ureteral Dilator Set Teflon 4,6,,8,10,12 , Ureteric Ballon Dilator -4,4.5F Of 2&4 Cm Length , Urethral Catheter Made Up Of Soft Color Less,Clear, Breathable, Odorless, 100% Silicon Having White Opaque Line And White Cyclindercal Balloon Tip 5 To 10 Ml Balloon Capacity. Sizes- 8, 12,14,16,18 Should Be Us Fda Approved. , Urinary Drainage Bag Adult (Uro Bag) , Urinary Drainage Bag Paed.(Uro Bag) , Urine Pot Stainless Steel Suitable For Female , Urine Pot Stainless Steel Suitable For Male , Urinebag Connector , Urometer , Urostomy Pouch , Vantilator Tubing(Neonatal)Compatible For Neonates With Heated Wire , Vascular Heamostatic Extternal Pad 2”X2” T0 Control Surface Bleeding, Made Of Chitosin Material, Single Pack, Sterile , Ventilating Bougie With Oxygen Connector , Ventilator Circuit , Ventilator Tube , Ventriculoperitoneal Shunt High Pressure , Ventriculoperitoneal Shunt Low Pressure , Ventriculoperitoneal Shunt Medium Pressurepressure , Wound Dressing Meshed Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% 10X10 Cm , Wound Dressing Meshed Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% 10X10 Cm , Wound Dressing Meshed Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% 10X25 Cm , Wound Dressing Meshed Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% 10X25 Cm , Wound Dressing Meshed Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% 20X40 Cm , Wound Dressing Poly Utherin Foam Containing Centella Asiatica Extract: Nlt 0.6% With Silk Protein: 8% & Pva: 0.22%Silver Oxide 1.2% & Ploysorbate 80: 0.15% & Glycerol: 1.52% Pu Foam 10X25 Cm , Wound Dressing Poly Utherin Foam Containing Centella Asiatica Extract: Nlt 0.6% With Silk Protein: 8% & Pva: 0.22%Silver Oxide 1.2% & Ploysorbate 80: 0.15% & Glycerol: 1.52% Pu Foam 20X40 , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% & Sliver Oxide: 1.2% 10X10cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% & Sliver Oxide: 1.2% 10X25cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% & Sliver Oxide: 1.2% 20X40cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% 10X10 Cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% 10X25 Cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6% With Activated Silk Matrix 46% 20X40 Cm , Wound Dressing Sprinkling Powder Containing Centella Asiatica Extract: Nlt 0.6% With Sliver Oxide: 1.2% &Silk Powder: 8% 100Gms Jar , Wound Dressing Sprinkling Powder Containing Centella Asiatica Extract: Nlt 0.6% With Sliver Oxide: 1.2% &Silk Powder: 8% 10Gms Bott. , Wound Dressing Sprinkling Powder Containing Centella Asiatica Extract: Nlt 0.6% With Sliver Oxide: 1.2% &Silk Powder: 8% 50Gms Jar , X-Ray Developer 22.5 Ltr.Liquid Form , X-Ray Developer 22.5 Ltr.Powder Form , X-Ray Film Developing Hangers Tension Type Ss 10X12 , X-Ray Film Developing Hangers Tension Type Ss 12X15 , X-Ray Film Developing Hangers Tension Type Ss 8X10 , X-Ray Film Polyster Base Size 10”X12” (50 Sheet Pkt.) , X-Ray Film Polyster Base Size 12”X15” (50 Sheet Pkt.) , X-Ray Film Polyster Base Size 60.5”X8.5” (50 Sheet Pkt.) , X-Ray Film Polyster Base Size 8”X10” (50 Sheet Pkt.) , X-Ray Fixer 22.5 Ltr.Liquid Form , X-Ray Fixer 22.5 Ltr.Powder Form , Yonker Suction Set , Zebra Guide Wire 0.035,0.038 , Non Complaint Baloon Catheter , Non Complaint Baloon Catheter 1.5 Mm X8mm , Non Complaint Baloon Catheter 1.5 Mm X10mm , Non Complaint Baloon Catheter 1.5 Mm X12mm , Non Complaint Baloon Catheter 1.5 Mm X15mm , Non Complaint Baloon Catheter 1.5 Mm X20mm , Non Complaint Baloon Catheter 2.0 Mm X8mm , Non Complaint Baloon Catheter 2.0 Mm X10mm , Non Complaint Baloon Catheter 2.0 Mm X12mm , Non Complaint Baloon Catheter 2.0 Mm X15mm , Non Complaint Baloon Catheter 2.0 Mm X20mm , Non Complaint Baloon Catheter 2.5 Mm X8mm , Non Complaint Baloon Catheter 2.5 Mm X10mm , Non Complaint Baloon Catheter 2.5 Mm X12mm , Non Complaint Baloon Catheter 2.5 Mm X15mm , Non Complaint Baloon Catheter 2.5 Mm X20mm , Non Complaint Baloon Catheter 3.0 Mm X8mm , Non Complaint Baloon Catheter 3.0 Mm X8mm , Non Complaint Baloon Catheter 3.0 Mm X10mm , Non Complaint Baloon Catheter 3.0 Mm X12mm , Non Complaint Baloon Catheter 3.0 Mm X15mm , Non Complaint Baloon Catheter 3.0 Mm X20mm , Non Complaint Baloon Catheter 3.5 Mm X8mm , Non Complaint Baloon Catheter 3.5 Mm X10mm , Non Complaint Baloon Catheter 3.5 Mm X12mm , Non Complaint Baloon Catheter 3.5 Mm X15mm , Non Complaint Baloon Catheter 3.5 Mm X20mm , Non Complaint Baloon Catheter 4.0 Mm X8mm , Non Complaint Baloon Catheter 4.0 Mm X10mm , Non Complaint Baloon Catheter 4.0 Mm X12mm , Non Complaint Baloon Catheter 4.0 Mm X15mm , Non Complaint Baloon Catheter 4.0 Mm X20mm , Non Complaint Baloon Catheter 4.5 Mm X8mm , Non Complaint Baloon Catheter 4.5 Mm X10mm , Non Complaint Baloon Catheter 4.5 Mm X12mm , Non Complaint Baloon Catheter 4.5 Mm X15mm , Non Complaint Baloon Catheter 4.5 Mm X20mm , Non Compliant Lliofemoral Venous And Av Fistula Pta Dilation Catheter Available In Various Diameters Ranging From 12Mm To 26Mm In Various Lengths Ranging From 20Mm To 60Mm In Both Catheter Lengths Between 80Cm To 120Cm Having Normal Pressure Up To 6Atm And Rbp Up To 18Atm With Short Shoulders , Semi Complaint Baloon Catheter , Semi Complaint Baloon Catheter 1.5 Mm X8mm , Semi Complaint Baloon Catheter 1.5 Mm X10mm , Semi Complaint Baloon Catheter 1.5 Mm X15mm , Semi Complaint Baloon Catheter 1.5 Mm X20mm , Semi Complaint Baloon Catheter 2.0 Mm X8mm , Semi Complaint Baloon Catheter 2.0 Mm X10mm , Semi Complaint Baloon Catheter 2.0 Mm X12mm , Semi Complaint Baloon Catheter 2.0 Mm X15mm , Semi Complaint Baloon Catheter 2.0 Mm X20mm , Semi Complaint Baloon Catheter 2.5 Mm X8mm , Semi Complaint Baloon Catheter 2.5 Mm X10mm , Semi Complaint Baloon Catheter 2.5 Mm X12mm , Semi Complaint Baloon Catheter 2.5 Mm X15mm , Semi Complaint Baloon Catheter 2.5 Mm X20mm , Semi Complaint Baloon Catheter 3.0 Mm X8mm , Semi Complaint Baloon Catheter 3.0 Mm X10mm , Semi Complaint Baloon Catheter 3.0 Mm X12mm , Semi Complaint Baloon Catheter 3.0 Mm X15mm , Semi Complaint Baloon Catheter 3.0 Mm X20mm , Semi Complaint Baloon Catheter 3.5 Mm X8mm , Semi Complaint Baloon Catheter 3.5 Mm X10mm , Semi Complaint Baloon Catheter 3.5 Mm X12mm , Semi Complaint Baloon Catheter 3.5 Mm X15mm , Semi Complaint Baloon Catheter 3.5 Mm X20mm , Semi Complaint Baloon Catheter 4.0 Mm X8mm , Semi Complaint Baloon Catheter 4.0 Mm X10mm , Semi Complaint Baloon Catheter 4.0 Mm X12mm , Semi Complaint Baloon Catheter 4.0 Mm X15mm , Semi Complaint Baloon Catheter 4.0 Mm X20mm , Semi Complaint Baloon Catheter 4.5 Mm X10mm , Semi Complaint Baloon Catheter 4.5 Mm X12mm , Semi Complaint Baloon Catheter 4.5 Mm X15mm , Semi Complaint Baloon Catheter 4.5 Mm X20mm , Drug Eluting Stent(Everloimus,Zotarolimus,Serolimus)(Cobalt Chromium &Platinum Chromium Stent Platform) , 3.5Mm X 19Mm , 3.5Mm X 20Mm , 3.5Mm X 21Mm , 3.5Mm X 24Mm , 3.5Mm X 28Mm , 3.5Mm X 29Mm , 3.5Mm X 32Mm , 3.5Mm X 34Mm , 3.5Mm X 36Mm , 3.5Mm X 39Mm , 3.5Mm X 40Mm , 3.5Mm X 44Mm , 3.5Mm X 48Mm , 4.0Mm X 8Mm , 4.0Mm X 10Mm , 4.0Mm X 11Mm , 4.0Mm X 12Mm , 4.0Mm X 14Mm , 4.0Mm X 16Mm , 4.0Mm X 18Mm , 4.0Mm X 19Mm , 4.0Mm X 20Mm , 4.0Mm X 21Mm , 4.0Mm X 24Mm , 4.0Mm X 28Mm , 4.0Mm X 29Mm , 4.0Mm X 32Mm , 4.0Mm X 34Mm , 4.0Mm X 36Mm , 4.0Mm X 39Mm , 4.0Mm X 40Mm , 4.0Mm X 44Mm , 4.0Mm X 48Mm , Temporary Pacemaker , Temporary Pacing Lead 6F , Permanent Pacemaker , Pacing Pli 6F Sheath , Permanent Pacing Lead , Permanent Pacemaker Single Chamber /Dual Chamber , Baloon Mitral Valvotomy , Sym Inou Baloon 24Mm/26Mm/28Mm , Sym Baloon Accessories , Atrial Septal Puncture Needle , Mullins Sheath 7F , Leur Lock Syringe X 10Ml , Pulmonary Balloon Valvotomy , Tysach/Armada Baloon 8Mm X20mm , Tysach/Armada Baloon 8Mm X40mm , Tysach/Armada Baloon 8Mm X60mm , Tysach/Armada Baloon 10Mm X20mm , Tysach/Armada Baloon 10Mm X40mm , Tysach/Armada Baloon 10Mm X60mm , Tysach/Armada Baloon 12Mm X20mm , Tysach/Armada Baloon 12Mm X40mm , Tysach/Armada Baloon 12Mm X60mm , Tysach/Armada Baloon 14Mm X30mm , Tysach/Armada Baloon 14Mm X40mm , Tysach/Armada Baloon 14Mm X60mm , Tysach/Armada Baloon 16Mm X30mm , Tysach/Armada Baloon 16Mm X40mm , Tysach/Armada Baloon 16Mm X60mm , Tysach/Armada Baloon 18Mm X30mm , Tysach/Armada Baloon 18Mm X40mm , Tysach/Armada Baloon 18Mm X60mm , Tysach/Armada Baloon 20Mm X30mm , Tysach/Armada Baloon 20Mm X40mm , Tysach/Armada Baloon 20Mm X60mm , Amplatzer Superstiff Guide Wire 260Cm , Microcatheters,Thrombosuction & Extention Catheter , Asahi Corsair Microcatheter , Asahi Corsair Pro Microcatheter , Pro Track Microcatheter , Direxion Torqueable Microcatheter , Guidezilla Extention Catheter , Thrombosuction Catheter 6F , Thrombosuction Catheter 7F , Pda Device Closure , Pda Device Of Appropriate Size , Pda Device Delivery Catheter And Cable Of Appropriate Size , Amplatzer Superstiff Guidewire 260Cm , Asd Device Closure , Asd Device Of Appropriate Size , Asd Device Delivery Catheter And Cable Of Appropriate Size , Amplatzer Superstiff Straight Tip Guidewire 260Cm , Exchange Jtip 260Cm(0.035/0.038) , Electrophysiology Study , 7F 4Mm Tip Med Ablation , Bidirection 7F 4Mm Tip Med Ablation , 7F 4Mm Tip Med Irrigated Abiation , Connector For Ablation (Sjm-Sjm) , 6F Quadripolar For His Recording , 5F Quadripolar For His Recording , Connector For Quadripolar Catheter , 6F Decflectable Decapolar , 5F Decflectable Decapolar , Connector For Decflectable Catheter , Transeptal Needle , 8F Long Sheath For Transeptal Puncture , Bidirection Introducer Med Curve , Guidewire , Teurmohydrophillic Guidewire 0.035 X260cm(J Tip) , Teurmohydrophillic Guidewire 0.035 X150cm(Straight Tip) , Teurmohydrophillic Guidewire 0.035 X150cm(J Tip) , Teurmohydrophillic Guidewire 0.035 X260cm(Straight Tip) , Amplatz Super Stiff Hard Wire 0.035 X 260Cms (Fda Approved) , Amplatz Super Stiff Hard Wire 0.035 X 145Cms (Fda Approved) , Amplatz Super Stiff Hard Wire 0.035 X 75Cms (Fda Approved) , Amplatz Ultra Stiff Hard Wire 0.035 X 260Cms (Fda Approved) , Bmw Wire 0.014 X190cm , Cto Wires 0.014 (Scitanium Core) , Cto Wires 0.018 (Scitanium Core) , Embolizing Agents , Pva Articale 150-250Um , Pva Articale 250-355Um , Pva Articale 355-500Um (Fda Approved) , Pva Articale 500-710Um , N-Butyl 2-Cyanoacrylate Glue 0.5Ml Vial , Gel Foam , Ethyl Esters Of Iodized Fatty Acid (Poppy Seed Oil) 10Ml Vial , Pushable Coils 0.018 , Pushable Coils 0.035 , Platinum ,Fibered 0.018 Pushable Coils , Platinum ,Fibered 0.035 Pushable Coils , Stents , Self-Expanding,Closed Cell,Radiopaque,Carotid Stent , Embolic Protection Device Compatible With Stent Specifications , Self-Expanding Nitinol Stent Large Cell Biliary Stent With Tantalum Marker, 6F Sheath 0.035 Wire Compatibility. , Uncovered Self Expanding Venous Stentindicated For Llio-Femoral Stenosisavailable In Various Diameters Ranging From 10Mm-18Mm And Lengths 40Mm-160Mm,Mri Compatible. , 6F And 5F Compatible Self-Expanding Nitinol Bare Metal Stent Indicated For Sfa And Full Popliteal Lesions Available In Diameters Ranging Between 5Mm-7Mm And Lengths Ranging Between 40Mm-170Mm. , Baloon Mounted Stents Nitinol Stents , Endovascular Stent Graft. , Vascular Covered Stent Indicated For Av Outflow And Fistula. , Name Of Sutures , 1 /2 Cir Ccs Cut Needle 48 Mm Stainless Steel Length 45 Cm- 4 , 1 /2 Cir Ccs Cut Needle 48 Mm Stainless Steel Length 45 Cm- 5 , 1 /2 Cir Ccs Cut Needle 48 Mm Stainless Steel Length 45 Cm- 6 , 10-0 Double Arm Nylon Monofilament With 3/8 Circle Taper Point Needle , 11 Mm Optic View Bladeless Trocar With Bilateral Tissue Separator. , 12 Mm Optic View Bladeless Trocar With Bilateral Tissue Separator. , 15 Mm Optic View Bladeless Trocar With Bilateral Tissue Separator. , 2-Octyl Cynoacrylate Propen, Topical Skin Adhesive,0.5Ml , 45 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator , 22Mm Distal Jaw Opening And 8 Mm Proximal, Shaft Length Of 340Mm. , 5 Mm Optic View Bladeless Trocar With Bilateral Tissue Separator. , 5-0 Silk, Braded With 3/8 Circle Reverce Cutting Needle , 5Mm Medium Large Preloaded Multiple Clip Applicator With 15 Clips, 8.8 Mm Closed Clip Length. , 60 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator , 22Mm Distal Jaw Opening And 8 Mm Proximal, Shaft Length Of 340Mm , 60 Poly Propylene With Cd Reverse Cutting Needle 6/0 12 Foils , 8-0 Double Arm Nylon Monofilament With 3/8Circle Taper Point Needle , Absorbable (6-0) Braided Coated Polyglactin Aw Violet 8Mm 1/2 Circle Spatulated Micro Point Doublw Arm 45 Cm , Absorbable Surgical Suture Braided Polyglycolic Acid 3/8 Circle Reverse Cuttingg 12Mm 45 Cm Spatulated Needle , Bb Silk With 1/2 Cir. Cd Cutting Needle 16 Mm Length 75 Cm- 3/0 , Bb Silk With 1/2 Cir. Cd Cutting Needle 16 Mm Length 75 Cm- 4/0 , Bb Silk With 1/2 Cir.Rb Needle 20Mm Length 75 Cm- 1/0 , Bb Silk With 1/2 Cir.Rb Needle 20Mm Length 75 Cm- 3/0 , Bb Silk With 1/2 Cir.Rb Needle 30Mm Length 75 Cm- 2/0 , Bb Silk With 3/4.Revrse Cutting Needle 26 Mm Length 76 Cm- 3/0 , Bb Silk With 3/8 Cir. Reverse 2/0 Cutting Needle 45 Mm Length 76Cm- 2/0 , Braided Polyamide * 0 6X45cm Pre-Cut , Black Mm , Braided Polyamide * 0 7X75cm Pre-Cut , Black Mm , Braided Polyamide * 1 7X75cm Pre-Cut , Black Mm , Braided Polyamide * 2-0 12X45cm Pre-Cut , Black Mm , Braided Polyamide * 2-0 7X75cm Pre-Cut , Black Mm , Braided Polyamide * 3-0 12X45cm Pre-Cut , Black Mm , Braided Polyamide * 3-0 7X75cm Pre-Cut , Black Mm , Braided Polyamide * 4-0 12X45cm Pre-Cut , Black Mm , Catgut Chromic Length 152 Cm Size 2 Without Needle , Chormic Catgut Absorbable Suture Compact Part Composed By Pirified Animal Intedtinal(Cattle And Sheep) Needle 1/2 Circle Round Body/Cutting Needle 76 Cm Size 6-0 , Chromic Catgut Suture Size- 1, 152 Cm Without Needle , Chromic Catgut Suture Size- 1-0, 152 Cm Without Needle , Chromic Catgut Suture Size- 2-0 76 Cm 1/2 Crb 30 Mm , Chromic Catgut Suture Size- 2-0, 152 Cm Without Needle , Chromic Catgut Suture Size- 3-0 76 Cm 1/2 Crb 20 Mm , Chromic Catgut Suture Size- 3-0, 152 Cm Without Needle , Chromic Catgut Suture Size- 1-0 76 Cm 1/2 Crb 30 Mm , Chromic Catgut Suture Size-1, 76 Cm 1/2 Crb 40 Mm Heavy , Chromic With Cd Rb Needle 16 Mm Length 76 Cm Size 4-0 , Chromic With St Rb Needle 50 Mm Length 76 Cm Size 2-0 , Chromic With 1/2 Cir Rb Needle 40 Mm Length 76 Cm Size 5-0 , Chromic With 1/2 Cir Rb Needle 45 Mm Length 100 Cm Size 1 , Chromic With 1/2 Cir Rb Needle 45 Mm Length 100 Cm Size 2 , Chromic With 1/2 Circle Rb Needle , Chromic With 1/2 Circle Rb Needle 30 Mm Length 76 Cm Size 1-0 , Chromic With 1/2 Circle Rb Needle 30 Mm Length 76 Cm Size 2-0 , Chromic With 1/2 Circle Rb Needle 40 Mm Length 76 Cm Size 1-0 , Chromic With 1/2 Circle Reverse Cutting Needle 12 Mm Length 76 Cm Size 3-0 , Chromic With 5/8 Cir Taper Cut Needle 10 Mm Length 30 Cm Size 5-0 , Chromic With Cd Rb Needle 40 Mm Length 76 Cm Size 1-0 , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm , Oval Pledget 3X6mm,Firm Pledget,Penetratingtaper,1/2 Circle,16Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm, Firm Pledget,Taper Point,1/2 Circle,20Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm, Soft Pledget,Taper Point,1/2 Circle,20Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm,Firm Pledget,Taper Point,1/2 Circle,16Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm,Firm Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm,Soft Pledget,Taper Point,1/2 Circle,16Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm,Soft Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 4.5X6mm,Firm Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 4.5X6mm,Soft Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X36/90Cm Da, Oval Pledget 3X6mm,Firm Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 Blue 1X30/75Cm Da, Oval Pledget 3X6mm, Firm Soft Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 Blue 1X30/75Cm Da, Oval Pledget 3X6mm, Soft Pledget,Taper Point,1/2 Circle,20Mm Pledget Oval , Coated ,Braided Polyester* 2-0 Blue 1X30/75Cm Da, Oval Pledget 3X6mm, Soft Pledget,Taper Point,1/2 Circle,20Mm Pledget Oval , Coated ,Braided Polyester* 2-0 Blue 1X30/75Cm Da, Oval Pledget 3X6mm, Soft Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated Braided Fast Absorbing Polyglactin 910 Sut. With 1/2 Cir Reverse Cutting Needle 36 Mm Length 90 Cm Size 1/0 , Coated Braided Fast Absorbing Polyglactin 910 Sut. With 1/2 Cir Reverse Cutting Needle 40 Mm Length 90 Cm Size 1 , Coated Braided Fast Absorbing Polyglactin 910 Sut. 5/0 With 3/8 Cutting Needle 16 Mm Length 45 Cm Size 5/0 , Coated Braided Fast Absorbing Polyglactin 910 Sut. With 1/2 Cir Round Body And 1/2 Cir Reverse Cutting Double Needle 36 Mm Length 140 Cm Size 2/0 Undyed , Coated Braided Fast Absorbing Polyglactin 910 Sut. With 1/2 Cir Taper Cut Needle 36 Mm Length 100 Cm Size 2/0 Undyed , Coated Braided Fast Absorbing Polyglactin 910 Sut.With 3/8 Cir Cutting Needle 16 Mm Length 45 Cm Size 4/0 Undyed , Coated Braided Fast Absorbing Polyglactin 910 Sut.With Curved Reverse Cutting Needle 11 Mm Length 45 Cm Size 5/0 Undyed , Coated Braided Polyglactin 910 Sut. With 1/2 Cir Rb Needle 20 Mm Length 70 Cm Size 3/0 , Coated Braided Polyglactin 910 Sut. With 1/2 Cir Rb Needle 40 Mm Length 90 Cm Size 1 , Coated Braided Polyglactin 910 Sut. With Cir Cutting Needle 36 Mm Length 70 Cm Size 3/0 , Coated Braided Polyglactin 910 Sut. With Sp Mp Double Needle 8 Mm Length 45 Cm Size 6/0 , Coated Braided Polyglactin 910 Sut.With Cd Cutting Needle 22 Mm Length 45 Cm Size 3/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Cir Rb Needle 20 Mm Length 70 Cm Size 4/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Cir Rb Needle 30 Mm Length 100 Cm Size 2/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Cir Rb Needle 40 Mm Length 100 Cm Size 1 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Cir Rb Needle 40 Mm Length 90 Cm Size 2/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Circle Reverse Cutting Needle 23 Mm Length 35 Cm Size 1 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Circle Round Body Taper Point Needle 36.4 Mm Length 90 Cm Undyed Size 2/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Cir Rb Needle 20 Mm Length 75 Cm Size 3/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Cir Rb Needle 36 Mm Length 90 Cm Size 3/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Cir Rb Needle 40 Mm Length 100 Cm Size 1/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Circle Reverse Cutting Needle 40 Mm Length 100 Cm Size 1 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With 1/2 Circle Reverse Cutting Needle 40 Mm Length 100 Cm Size 2 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With Cd Cutting Needle 22 Mm Length 45 Cm Size 3/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.) With 1/2 Cir Rb Needle 30 Mm Length 100 Cm Size 1/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With 1/2 Circle Reverse Cutting Needle 36 Mm Length 90 Cm Size 1/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With 1/2 Circle Round Body Taper Point Needle 36.4 Mm Length 90 Cm Undyed Size 1 , Coated Polyster Braided With Cd White D Needle 25 Mm (Curved Reverse Cutting Round Body Or Taper Cut) Length 90 Cm- 2/0 , Coated,Braided Lactomer 0 90Cm , Violet 37Mm 1/2 Circle Reverse Cutting , Coated,Braided Lactomer 0 90Cm , Violet 40Mm 1/2 Circle Taper Point , Coated,Braided Lactomer 1 90Cm , Violet 40Mm 1/2 Circle Reverse Cutting , Coated,Braided Lactomer 1 90Cm , Violet 40Mm 1/2 Circle Taper Point , Coated,Braided Lactomer 2-0 75Cm , Violet 30Mm 1/2 Circle Taper Point , Coated,Braided Lactomer 2-0 90Cm , Violet 37Mm 1/2 Circle Reverse Cutting , Coated,Braided Lactomer 3-0 75Cm , Undyed 24Mm 3/8 Circle Reverse Cutting , Coated,Braided Lactomer 3-0 75Cm , Violet 22Mm 1/2 Circle Taper Point , Coated,Braided Lactomer 4-0 75Cm , Violet 20Mm 1/2 Circle Taper Point , Composite Mesh Polypropylene And Polyglactine 910 10X15 Cm , Composite Mesh Polypropylene And Polyglactine 910 15X15 Cm , Composite Mesh Polypropylene And Polyglactine 910 6X11 Cm , Curve Cutter Reload With 2Mm Closed Stapler Height. , Curved Circular Stapler 25 Mm With Controlled Tissue Compression , Curved Circular Stapler 29 Mm With Controlled Tissue Compression. , Curved Circular Stapler 33 Mm With Controlled Tissue Compression. , Disposable Intraluminal Stapler Curved Circular Stapler 21 Mm With Controlled Tissue Compression. , Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 2 Mm And Open Staple Leg Length Of 4.1 Mm , Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Endoscopic Cutting And Stapling Devices 45Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1.5Mm And Open Staple Leg Length Of 3.5Mm. , Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 2 Mm And Open Staple Leg Length Of 4.1 Mm , Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1.5Mm And Open Staple Leg Length Of 3.5Mm. , Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Glass Ionomer Dental Cement- For Luting , Glycomer Mid-Term Absorbable Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry 3-0 45Cm , Undyed 24Mm 3/8 Circle Reverse Cutting , Glycomer Mid-Term Absorbable Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry 3-0 45Cm , Undyed 19Mm 3/8 Circle Reverse Cutting , Glycomer Mid-Term Absorbable Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry 4-0 45Cm , Undyed 19Mm 3/8 Circle Reverse Cutting , Hemmorhoidal Circular Stapler 33Mm With Controlled Tissue Compression, Leg Length Of 4Mm. , Knife Blade Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Ligation Clips For 1 Mm Vessels With Lateral & Transverse Groove & Distal Tip Closure 20 Clips Per Cartage , Ligation Clips For 2 Mm Vessels With Lateral & Transverse Groove & Distal Tip Closure 6 Clips Per Cartage , Ligation Clips For 3 Mm Vessels With Lateral & Transverse Groove & Distal Tip Closure 6 Clips Per Cartage , Ligation Clips For 4 Mm Vessels With Lateral & Transverse Groove & Distal Tip Clos 6 Clips Per Cartage , Linear Cutter Of 55 Mm With Inbuilt Selectable Staple Height. , Linear Cutter Of 75 Mm With Inbuilt Selectable Staple Height. , Linear Stapler 30 Mm Size With Controlled Tissue Compression. , Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Linear Stapler 90 Mm Size With Controlled Tissue Compression. , Long-Term Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry * 0 45Cm , Green 37Mm 1/2 Circle Taper Point , Long-Term Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry * 2-0 30Cm , Green 37Mm 1/2 Circle Taper Point , Long-Term Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry * 3-0 45Cm , Green 26Mm 1/2 Circle Taper Point , Long-Term Absorbable Polyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry * Device 4-0 30Cm , Macro Porous Tissue Separating Multi Layered Partially Absorbable Mesh With Oxidized Regenerated Cellulose, Polydioxanone And Soft Polypropylene Mesh Size 15 Cm X 15 Cm , Macro Porous Tissue Separating Multi Layered Partially Absorbable Mesh With Oxidized Regenerated Cellulose, Polydioxanone And Soft Polypropylene Mesh Size 15 Cm X 20 Cm , Macro Porous Tissue Separating Multi Layered Partially Absorbable Mesh With Dual Sided Polyglecaprone 25 Film, Polydioxanone And Soft Polypropylene Mesh Size 15Cm X 15Cm . , Macro Porous Tissue Separating Multi Layered Partially Absorbable Mesh With Dual Sided Polyglecaprone 25 Film, Polydioxanone And Soft Polypropylene Mesh Size 15Cm X 20Cm . , Memory Knitted Transparent Polyproplene Hernia Sheath, 35Gsm, Pore Size-2.00 To 2.5Mm, Laser Cut Round Edges. Size-4X6, 6X6. , Monofilament Glycomer 0 75Cm , Undyed 37Mm 1/2 Circle Reverse Cutting , Monofilament Glycomer 0, 90Cm , Violet 40Mm 1/2 Circle Taper Point , Monofilament Glycomer 1 ,90Cm , Violet 40Mm 1/2 Circle Taper Point , Monofilament Glycomer 2-0 75Cm , Violet 26Mm 1/2 Circle Taper Point , Monofilament Glycomer 3-0 75Cm , Undyed 19Mm 3/8 Circle Reverse Cutting , Monofilament Glycomer 3-0 75Cm , Undyed 24Mm 3/8 Circle Reverse Cutting , Monofilament Glycomer 3-0 75Cm , Violet 26Mm 1/2 Circle Taper Point , Monofilament Glycomer 4-0 75Cm , Violet 22Mm 1/2 Circle Taper Point , Monofilament Glycomer 4-0 75Cm , Undyed 19Mm 3/8 Circle Reverse Cutting , Monofilament Polyglyconate* 4-0 75Cm , Green 17Mm 1/2 Circle Taper Point , Monofilament Polyglyconate* 6-0 75Cm , Green 13Mm 1/2 Circle Taper Point , Monofilament Polyglyconate* 7-0 60Cm , Green 9Mm 3/8 Circle Taper Point ,Double Arm , Monofilament Polyglyconate* Cv 5-0 75Cm , Green 12Mm 3/8 Circle Taper Point , Double Arm , Monofilament Polyglyconate* Cv 6-0 75Cm , Green 9Mm 3/8 Circle Taper Point ,Double Arm , Monofilament Stainless Steel 2 2X45cm , 48Mm 1/2 Circle Reverse Cutting , Monofilament Stainless Steel 4 2X45cm , 48Mm 1/2 Circle Reverse Cutting , Monofilament Stainless Steel 5 2X75cm , 45Mm 1/2 Circle Blunt Point , Monofilament Stainless Steel 5 4X45cm , 45Mm 1/2 Circle Tapercutting , Monofilament Stainless Steel 6 2X45cm , 45Mm 1/2 Circle Tapercutting , No Knife Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Non Absorbable (10-0) Monofilament Polymide Black 6Mm 3/8 Circle Spatulated Micro Point Doublw Arm 38 Cm , Non Absorbable Braided Silk Black 10Mm 3/8 Circle Reverse Cutting Micro Point 38 Cm , Non Absorbable Braided Silk Black 12 Mm 3/8 Circle Reverse Cutting Micropoint 38 Cm , Non Absorbable Surgical Suture(Braded Silk Black) Silk 6-0, 8Mm 3/8 Circle Reverse Cutting Micropoint , Oxidised Cellulose Absorbable Hemostate 2*14 Usfda Approved , Oxidised Cellulose Absorbable Hemostate 2*3 Usfda Approved , Oxidised Cellulose Absorbable Hemostate 4*8 Usfda Approved , Oxidised Regenerated Cellulose Absorbable Hemostate 1*2 Usfda Approved , Oxidised Regenerated Cellulose Absorbable Hemostate 2*4 Usfda Approved , Oxidised Regenerated Cellulose Absorbable Hemostate 4*4 Usfda Approved , Pledget Oval 3X6mm Firm 10 Starnds Pledget Oval , Pledget Oval 3X6mm Soft 10 Strands Pledget Oval , Pledget Oval 4.5X6mm Firm 10 Strands Pledget Oval , Pledget Oval 4.5X6mm Soft 10 Strands Pledget Oval , Pledgets 10 3X3mm Firm Square Pledget , Pledgets 10 3X7mm Firm Square Pledget , Poliglecaprone 25 Undyed With Irgacare Mp3-0,3/8 Circle Reverse Cutting,26Mm,70Cm , Poly Propylene With 1 /2 Cir Cc Double Needle (Indentical Guage Needle And Suture) 13 Mm Length 60 Cm- 5/0 , Poly Propylene With 1 /2 Cir Cc Double Needle 13 Mm (Dential Guage Needle And Suture) Length 75 Cm- 4/0 , Poly Propylene With 1/ 2 Cir Rb Heavy Needle 30 Mm Length 70 Cm – 1 , Poly Propylene With Cd Cut Rb Needle 16 Mm Length 60 Cm – 4/0 , Poly Propylene With Cd Rb Needle 16 Mm Length 70 Cm – 5/0 , Poly Propylene With Curved Cut Needle 22 Mm Length 70 Cm – 3/0 , Poly Propylene With Cutting Needle 45 Mm Length 100 Cm – 1 , Poly Propylene With 1/ 2 Cir Rb Needle 16 Mm Length 70 Cm – 4/0 , Poly Propylene With 1/ 2 Cir Rb Needle 16 Mm Length 70 Cm – 5/0 , Poly Propylene With 1/ 2 Cir Rb Needle 25 Mm Length 70 Cm – 3/0 , Poly Propylene With 1/ 2 Cir Rb Needle 30 Mm Length 70 Cm – 1/0 , Poly Propylene With 1/ 2 Cir Rb Needle 30 Mm Length 70 Cm – 2/0 , Poly Propylene With 1/ 2 Cir Rb Needle 40 Mm Length 70 Cm – 1 , Poly Propylene With 1/ 2 Cir Taper Cut Dnlomm Length 90 Cm – 3/0 , Poly Propylene 1/2 Cc Double Needle 16 Mm Length 90 Cm , Poly Propylene Black With Cd Rb Mp Needle 13 Mm Length 60 Cm – 5/0 , Poly Propylene Black With Cd Rb Mp Needle 8 Mm Length 60 Cm – 7/0 , Poly Propylene Mesh 15 Cm X 15 Cm , Poly Propylene With Rbd Needle 8 Mm Length 60 Cm – 7/0 , Poly Propylene With 1/2 Circle Rbd Needle 13 Mm Length 60 Cm – 5/0 , Poly Propylene With Cd Rbd Needle 10 Mm Length 60 Cm – 6/0 , Polyamide 3/8 Circle 26 Mm Revrse Cutting Needle Length 70 Cm – 3/0 , Polyamide 3/8 Circle 45 Mm Revrse Cutting Needle Length 70 Cm – 2/0 , Polyamide Black Mono Filament Length 38 Cm - 8/0 , Polyamide With % Circle Rb Needle 40 Mm Length 100 Cm – 1/0 , Polyamide With Cd Cut Needle 16 Mm Length 70 Cm – 3/0 , Polyamide With Cd Cut R Cut Extra Penetrating Needle 16 Mm Length 70Cm – 4/0 , Polyamide With Cd Reverse 5/0 Cut Needle 12 Mm Length 70Cm – 5/0 , Polybutester With Polytribolate Coating* 2-0 90Cm , Blue 26Mm 1/2 Circle Taper Point ,Double Arm , Polybutester With Polytribolate Coating* 4-0 90Cm , Blue 17Mm 1/2 Circle Taper Point, Double Arm , Polybutester With Polytribolate Coating* 5-0 75Cm , Blue 12Mm 3/8 Circle Taper Point ,Double Arm , Polybutester With Polytribolate Coating* 5-0 75Cm , Blue 13Mm 3/8 Circle Tapercutting ,Double Arm , Polybutester With Polytribolate Coating* 5-0 90Cm , Blue 12Mm 3/8 Circle Taper Point ,Double Arm , Polybutester With Polytribolate Coating* 5-0 90Cm , Blue 17Mm 1/2 Circle Taper Point ,Double Arm , Polybutester With Polytribolate Coating* 6-0 60Cm , Blue 9Mm 3/8 Circle Taper Point,Double Arm , Polybutester With Polytribolate Coating* 6-0 75Cm , Blue 9Mm 3/8 Circle Taper Point ,Double Arm , Polybutester With Polytribolate Coating* 7-0 60Cm , Blue 8Mm 3/8 Circle Taper Point , Double Arm , Polybutester With Polytribolate Coatingl* 3-0 90Cm , Blue 26Mm 1/2 Circle Taper Point ,Double Arm , Polybutylate Coated With Polyster Braided (Green) With 1 /2 Cir Taper Cut V-5 Double Armed Needle 17 Mm Length 90 Cm- 2/0 , Polybutylate Coated With Polyster Braided (Green) With 1 /2 Cir Taper Cut V-5 Double Armed Needle 25 Mm Length 90 Cm- 2/0 , Polydioxanone Irgacare Mp Coated 122Cm ,1 Loop Sgle Armed ,65Mm , Polydioxanone Irgacare Mp 70Cm M3 Usp2/0 Sgle Armed Sh,1/2 Circle ,Round Body,26Mm , Polydioxanone Irgacare Mp 90Cm M4 Usp1 Sgle Armed Ctx,I/2 Circle,48Mm , Polydioxanone With 1/2 Cir Reverse Cutting Orthopaedic Surgery (Os) Nededle 40 Mm Length 90 Cm- 1 , Polydioxanone With 1/2 Cir Round Body Heavy Needle 40 Mm Length 90 Cm- 1 , Polydioxanone With 3/8 Cir Round Body Needle 11 Mm Length 45 Cm- 6/0 , Polydioxanoneirgacare Mp 70Cm M2 Usp3/0 Sgle Armed Rb-1,1/2 Circle ,Round Body,17Mm , Polydioxanoneirgacare Mp Coated 150Cm Usp1-0 Rb Ctx,I/2 Circle,48Mm , Polyglactin 8Mm 1/4 , Circle Spatulated Micro Point Double Needle- Length 45 Cm Size 6-0 , Polyglactin 910 With Triclosan Coating 1,1/2 Circle Reverse Cutting O.S,40 Mm,100Cm, , Polyglactin 910 With Triclosan Coating 1,1/2 Circle Round Body,40 Mm,100 Cm, , Polyglactin 910 With Triclosan Coating 1-0,1/2 Circle Reverse Cutting O.S,40 Mm,100 Cm, , Polyglactin 910 With Triclosan Coating 3-0,1/2 Circle Round Body,20 Mm,75 Cm, , Polyglactin 910 With Triclosan Coating 4-0,1/2 Circle Round Body,20 Mm,70 Cm, , Polyglactin 910 With Triclosan Coating 1-0,1/2 Circle Round Body,40 Mm,100Cm, , Polyglactin 910 With Triclosan Coating 2-0,1/2 Circle Round Body,30 Mm,100 Cm, , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 1, 1/2 Circle Reserve Cutting O.S, 40 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 1, 1/2 Circle Round Body, 40 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 1-0, 1/2 Circle Reserve Cutting O.S, 40 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 1-0, 1/2 Circle Round Body, 40 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 3-0, 1/2 Circle Round Body, 20 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 3-0, 3/8 Circle Reserve Cutting 26 Mm 70 Cm , Polyglecaprone With 1/ 2 Cir Oval Rb Contrast Needle 26 Mm Length 70 Cm- 3/0 , Polyglecaprone With 1/ 2 Cir Oval Rb Jb Needle 26 Mm Length 70 Cm- 2/0 , Polyglecaprone With 3/ 8 Cir Cutting Needle 26 Mm – 3/0 , Polyglecaprone With 3/8 Cir Reverse Cutting Needle 16 Mm- 4/0 , Polyglecaprone With Curved 5/0 Reverse Cutting Needle 16 Mm , Polypropylene 2-0 Blue 90Cm V-20 Double Armed , Polypropylene 7-0 60Cm , 6Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * 2-0 90Cm , Blue 17Mm 1/2 Circle Tapercutting ,Double Arm , Polypropylene * 2-0 90Cm , Blue 26Mm 1/2 Circle Tapercutting ,Double Arm , Polypropylene * Ii 3-0 90Cm , Blue 17Mm 1/2 Circle Taper Point , Double Arm , Polypropylene * Ii 3-0 90Cm , Blue 17Mm 1/2 Circle Tapercutting ,Double Arm , Polypropylene * Ii 3-0 90Cm , Blue 17Mm 3/8 Circle Tapercutting ,Double Arm , Polypropylene * Ii 3-0 90Cm , Blue 26Mm 1/2 Circle Tapercutting ,Double Arm , Polypropylene * Ii 4-0 60Cm , Blue 13Mm 1/2 Circle Taper Point , Double Arm , Polypropylene * Ii 4-0 75Cm , Blue 17Mm 1/2 Circle Taper Point , Polypropylene * Ii 4-0 90 Pledget , Blue 17Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 4-0 90Cm , Blue 17Mm 1/2 Circle Taper Point ,Double Arm , Polypropylene * Ii 4-0 90Cm , Blue 17Mm 1/2 Circle Tapercutting ,Double Arm , Polypropylene * Ii 4-0 90Cm , Blue 22Mm 1/2 Circle Taper Point ,Double Arm , Polypropylene * Ii 4-0 90Cm , Blue 26Mm 1/2 Circle Tapercutting ,Double Arm , Polypropylene * Ii 5-0 60Cm , Blue 10Mm 1/2 Circle Taper Point , Double Arm , Polypropylene * Ii 5-0 60Cm , Blue 12Mm 3/8 Circle Taper Point , Double Arm,Black Needle , Polypropylene * Ii 5-0 75Cm , Blue 12Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 5-0 75Cm , Blue 13Mm 1/2 Circle Taper Point ,Double Arm , Polypropylene * Ii 5-0 75Cm , Blue 17Mm 1/2 Circle Taper Point , Polypropylene * Ii 5-0 90Cm , Blue 17Mm 1/2 Circle Taper Point ,Double Arm , Polypropylene * Ii 6-0 60Cm , Blue 12Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 6-0 60Cm , Blue 13Mm 1/2 Circle Taper Point , Double Arm , Polypropylene * Ii 6-0 60Cm , Blue 13Mm 3/8 Circle Tapercutting ,Double Arm , Polypropylene * Ii 6-0 60Cm , Blue 8Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 6-0 60Cm , Blue 9Mm 3/8 Circle Taper Point , Double Arm,Black Needle , Polypropylene * Ii 6-0 60Cm , Blue 9Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 6-0 60Cm , Blue 9Mm 3/8 Circle Tapercutting ,Double Arm , Polypropylene * Ii 6-0 75Cm , Blue 11Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 6-0 75Cm , Blue 12Mm 3/8 Circle Taper Point , Double Arm,Black Needle , Polypropylene * Ii 6-0 75Cm , Blue 12Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 6-0 75Cm , Blue 13Mm 1/2 Circle Taper Point , Double Arm , Polypropylene * Ii 6-0 75Cm , Blue 9Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 7-0 2X60 , Blue 6Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 7-0 60Cm , Blue 9Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 7-0 60Cm , Blue 9Mm 3/8 Circle Taper Point ,Double Arm,Black Needle , Polypropylene * Ii 7-0 60Cm , Blue 9Mm 3/8 Circle Tapercutting ,Double Arm , Polypropylene * Ii 7-0 75 , Blue 10Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 7-0 75 , Blue 8Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 8-0 45 , Blue 6Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 8-0 45 , Blue 8Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 8-0 60 , Blue 6Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene * Ii 8-0 60 , Blue 8Mm 3/8 Circle Taper Point ,Double Arm , Polypropylene , Blue 2-0 Blue 75Cm ,Taper Point,1/2 Circle, 27Mm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 10 X 15 Cm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 10 X 15 Cm ,Usfda Approved , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 15 X 15 Cm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 15 X 15 Cm ,Usfda Approved , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 6 X 11 Cm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 6 X 11 Cm ,Usfda Approved , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 7.6 X 15 Cm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 7.6 X 15 Cm ,Usfda Approved , Polypropylene Monofilament Sterile Precut Cd Reverse Cutting Needle 6-0 , Polypropylene,Blue,2-0 , 75Cm , Taper Point, 1/2 Circle, 37Mm , Protective Disk With Chgis A Hydrophilic Polyurethane Absorptive Foam With 52.5 G Chlorhexidine Gluconate ( Chg) 3/4 Disk ( 1.9 Cm) 1.5 Mm Center Hole With Radial Slit , Protective Disk With Chgis A Hydrophilic Polyurethane Absorptive Foam With 86.8 Mg Chlorhexidine Gluconate ( Chg)1 Disk ( 2.5 Cm) 7 Mm Center Hole With Radial Slit , Protective Disk With Chgis A Hydrophilic Polyurethane Absorptive Foam With 92 G Chlorhexidine Gluconate ( Chg)1 Disk ( 2.5 Cm) 4.0Mm Center Hole With Radial Slit , Ptfe Coated Cardiac Pacing Wire* 0 60Cm , 20Mm 1/2 Circle Taper Point , Ptfe Coated Cardiac Pacing Wire* 3-0 60Cm -2X12, 17Mm 1/2 Circle Taper Point , Reload For Linear Stapler 30 Mm Size With Controlled Tissue Compression. , Reload Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Reload Linear Stapler 90 Mm Size With Controlled Tissue Compression. , Reloads For Re-Usable Linear Cutter 55 Mm With Closed Staple Height Of 1.5 Mm & 2 Mm , Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings & Separate Knife – Blade Module. , S112 Poly Propylene With Cd Rb Needle 13 Mm (02 Micron Length 60 Cm) , Skin Stapler With 35 Pins, Videx Coating With Kick Off Spring Mechanism. , Suture Copolymer Of Glycolide And E-Caprolactone,2-0,,20Cm,26Mm,20 Anchors /Inch Unidirectional , Suture Copolymer Of Glycolide And E-Caprolactone,3-0,30Cm,3/8 Circle Rc 24Mm Needle,20 Anchors /Inch Unidirectional , Suture Dyed Polyester Poly (P-Dioxanone),1,36X36 Cm, 1/2 Circle Cutting 40Mm,20 Anchors/ Inch Biderctional , Suture Dyed Polyester Poly (P-Dioxanone),2-0,30Cm, 1/2 Circle 36Mm Rb, 20 Anchors /Inch Unidirctional , Suture Dyed Polyester Poly (P-Dioxxanone), 1-0,14X4 Cm, 1/2 Circle 36Mm Rb, 20 Anchors / Inch Bidirctional , Suture Dyed Polyester Poly (P-Dioxxanone), 1-0,24X4 Cm, 1/2 Circle 36Mm Rb, 20 Anchors / Inch Bidirctional , Universal Black Reload Compatible With The 55Mm Linear Cutter With Inbuilt Selectable Staple Height. , Universal Black Reload Compatible With The 75Mm Linear Cutter With Inbuilt Selectable Staple Height. , Other Items/Drops/Oint./Syp./Sol./Jelly. , 0.1 G Paracetic Acid, Other Ingredients : Corrosion Inhibitors, Surfactants, Stabilising Agents, Excipients.5000 Ml , Electrochemically Activated Hypochlorous Acid 100 Ppm Dental Application Should Be Non-Toxic Should Release Active Chlorine From Hypochlorous Acid At 100 Ppm Should Have Neutral Ph(±1) Should Be Anti Inflammatory The Solution Should Be Manufactured In An Iso 9001-2008, Iso 13485-2016 (From Cdsco Approved Notified Body) Certified Facility 500Ml , Electrochemically Activated Hypochlorous Acid 100 Ppm Wound Irrigation Solution Should Be Non-Toxic & Skin Friendly Should Release Active Chlorine From Hypochlorous Acid At 100Ppm Should Have Neutral Ph(±1) Should Be Anti Inflammatory Should Not Sting Or Burn While Application The Solution Should Be Manufactured In An Iso 9001-2008, Iso 13485-2016 (From Cdsco Approved Notified Body) Certified Facility 500Ml , Electrochemically Activated Hypochlorous Acid 200 Ppm Wound Irrigation Solution Should Be Non-Toxic & Skin Friendly Should Release Active Chlorine From Hypochlorous Acid At 200 Ppm Should Have Neutral Ph(±1) Should Be Anti Inflammatory Should Not Sting Or Burn While Application The Solution Should Be Manufactured In An Iso 9001-2008, Iso 13485-2016 (From Cdsco Approved Notified Body) Certified Facility 500Ml , 0.5% W/W Triclosan, Topical Antibacterial Solution Enriched With Emollients And Moisturisers, 500Ml , 1%W/V Available Iodine In A Non-Oxynol With Soluble Iodine Suractant Base With Sodium Iodide < 1% W/V And Surfactant < 5% W/V 500 Ml , 100 G Of Gigazyme X-Tra Contains: 7.7 G Didecyldimethylammonium Chloride, 0.4 G Of Polyhexamethylene Biguanide. Contains Subtilisin, Polyhexamethylene Biguanide.5000 Ml , A Low Foaming Solution Clear Blue Enzymatic Detergant With Sodium Tetraborate Decahydrate As Cleanser And With Rust Inhibitors Used For Manual As Well As Automated System Containing Protease, Lipase, Amylase And Cellulase. 3. 8 Litres= 1 Gallon , Absorable Gelatin Based Topical Absorable Flowable Hemostat With 6 Cc Syringes Pre Filled With Hemostatic Matrix With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexiable Applicator Tip , Acyclovir Ointment 3% 5Gm , Adapalene 0.1% Gel , Aeroplane Splint , Air Mattress , Albendazole Susp.200Mg/5 Ml-10 Ml Bottle , Alcohol Based Instant Hand Sanitizer With Ethyl Alcohol (75%), And Triclosan (0.3%) Single Pack 500Ml Bottle. , Aldehyde Free Alcohol Based Rapid Disinfectant For Electronics And Medical Devices With Proponal-1(45G) Proponal-2(35G), Didecyl Dimethyl Ammonium Chloride 90.5G), Nalkyl Dimethyl Benzyl Ammonium Chloride (0.5G), And Poly-Hexamethylene Bigunide Hydro Chloride (0.5G) Single Pack - 500Ml Spray. , Alkalin Citrate With Potasium Sodium Oral Solution 100Ml , Alkyl Dimethyl Benzyl Ammonium Chloride 2.37% Alkyl Dimethyl Ethyl Benzyl Ammonium Chloride 2.37% With Intent Ingradient Approved From Internation Authority Like Usfda Usepa , All-Human (Bovine Aprotinin Free) Fibrin Sealant 1 Ml A) A Package (Different Skus - 1Ml, 2Ml, 5Ml) Containing: One Vial Each Of Bac2 (50-90 Mg/Ml Fibrinogen) And Thrombin (800-1200 Iu/Ml Human Thrombin) Frozen Solutions B) All-Human Formulation Free Of Bovine Aprotinin C) Triple-Lumen Tip To Prevent Clogging Inside The Applicator D) Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures E) Maintains Fibronectin/Fibrinogen Ratio Within Physiologic Ranges , All-Human (Bovine Aprotinin Free) Fibrin Sealant 2 Ml A) A Package (Different Skus - 1Ml, 2Ml, 5Ml) Containing: One Vial Each Of Bac2 (50-90 Mg/Ml Fibrinogen) And Thrombin (800-1200 Iu/Ml Human Thrombin) Frozen Solutions B) All-Human Formulation Free Of Bovine Aprotinin C) Triple-Lumen Tip To Prevent Clogging Inside The Applicator D) Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures E) Maintains Fibronectin/Fibrinogen Ratio Within Physiologic Ranges , Aluminium Hydro Gel(Antacid) 170Ml Syp. , Aluminium Hydro Paste Equivalent To Dried Aluminium Hydroxide I.P. 300Mg.Magnesium Hydroxide Paste Equivalent To Magnesium Hydroxide I.P.250Mg Activated Dimethicone I.P. 40Mg Sorbitol Solution (70%)I.P. 1000Mg(Non Crystallising) 170Ml Bottle , Amoxicillin Susp.125Mg/5Mg 30 Mkl Bott. Syp. , Amoxycilline+Clavulanic Acid Susp. I.P.( 200+28.5 Mg) 30Mlbottle , Ampicillin 250Mg/5Ml 30 Ml Syp. , Ankle Brace , Ankle Foot Orthosis Afo (Foot Drop Splint) , Antimicrobial Body Wash Containing 30% Ethanol & 1% Triclosan & Moisturiser 30 Ml , Antimicrobial Skin Cleanser Contains 2% C22h30cl2n10 As Active Antiseptic With Residual Action,And Has Undergone Soap Chamber Test Signifying Mildness.Also Containing Ethoxylated Alkylphenol And Fatty Acid Diethanolamide As Surfactant Against Gram Positive, Gram Negative Bacteria, Yeast And Lipophilic Viruses 500 Ml , Antiseptic Hospital Concentrate 500Ml Syp. , Aqua, Cocamidopropylamine Oxide, Peg-7 Glyceryl Cocoate, Glycerin, Hydroxyethyl-Cellulose, Lactic Acid, Contains Allantoin 500 Ml , Aqua, Peg-40 Hydrogenated Castor Oil, Glycerin, Aroma, Sodium Gluconate, Sucralose, Octenidine Hcl, Citric Acid, Bht .(Alcohol Free, Chlorhexidine Free) 250 Ml , Aqua, Peg-40 Hydrogenated Castor Oil, Glycerin, Aroma, Sodium Gluconate, Sucralose, Octenidine Hcl, Citric Acid, Bht .(Alcohol Free, Chlorhexidine Free)60 Ml , Arm Pouch Sling , Artemeether + Lumefantrine 20+120/5Ml Syp. , Asthalin Respules , Atropine Sulphate Eye Drop 1% 5 Ml Vial , Atropine Sulphate Eye Ointment 3% 3Gm Tube , Azithromycin Susp.100Mg/5Ml 15Ml Bottle Syp. , Azithromycin Susp.200Mg/5Ml 15Ml Bottle Syp. , Barium Sulphate Powder 200Gm , Barium Sulphate Susp.95%W/V 200Ml , B-Complex Syp. 100Ml Syp. , Bedesonide Nasal Spray , Benzalkonium Chloride I.P-10%V/V, Didecyl Dimethyl Ammounium Chioride - 8%, (1 Liter And 5 Literpack) , Benzile Benzoate 25% Emulsion 25% , Benzile Benzoate Lotion 25% , Benzyl Benoate Emulsion 25% 50Ml , Besacodyl Suppositories (Adult) , Besacodyl Suppositories (Child) , Betamethasone Ditropionate Lotion 0.05% 15 Gm Tube , Betamethasone Valerate + Gentamicin Sulphate 30Gm Gel. , Betamethasone Valerate 0.12% 15Gm Cream , Betaxolol 0.5% E/D , Bohler Braun Splint , Boric Acid Powder 400Gm Pkt. , Brimonidine 0.15% Eye Drop , Bromhexine Hydrochloride Syp.4Mg/5Ml 50Ml Bottle Syp. , Budesonide Nebulizing Suspension 0.5Mg/2Ml , C -Arm Cover , Caffine Citrate 1.5 Ml Oral Oral Solution , Caffine Citrate 3 Ml Oral Solution , Calamine Lotion , Calcitonin Inhaler , Calcitonin Spray , Calcium +Vitamin D3 Syrup 200Ml Syp. , Calcium Phosphate 82Mg/5Ml Syp. , Canister With Aqual Gel With Capacity 1000 Ml ( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Carbamezipine 100Mg/5Ml 100 Ml Bottle Syp. , Carboxy Metyl Cellulose 0.5% Eye Drop , Carnitine 500Mg/5Ml Syp. , Cefixime 50Mg/5Ml 30 Ml Bottle Syp. , Cefpodoxime 50Mg/5Ml Syp. , Cefuroxime 125Mg/5Ml 30 Ml Syp. , Cephalexine 125Mg/5Ml 30Ml Syp. , Cerumenolytic (For Ear Wax) Each 10 Ml Contanis Paradichlorobenzene 2% Benzocaine 2.7 % Chlorbutol 5% Turpenitine Oil 15% 10 Nl Vial , Cervical Collar Hard , Cervical Collar Soft , Cetirizine Syrup 45Mh/5Ml Syp. , Cetrimide +Chlorhexidine Solution , Cetrimide Cream Bp 1% 20Gm , Charcoal Activated (Powder) 100Gm Box/Pouch , Chloramphenicol Eye Applicaps 1% , Chloramphenicol Eye Drops 0.5% , Chloramphenicol Eye Drops 0.5% , Chlorhexidine Gluconate 02%W/V 50Ml Mouth Wash Solution , Chlorhexidine Gluconate Solution Ip 7.5 % V/V (Equivalent To Chlorhexidine Gluconate 1.5 % W/V), Cetrimide Ip 15% W/V 500 Ml , Chloroquin Phosphate Syrup 30 Ml Syp. , Ciprofloxacin 5Ml Eye/Ear Drop , Ciprofloxacin Eye Drop 0.3% , Ciprofloxacin Eye Ointment , Ciprofloxacin0.3% + Dexamethasone 01% Eye Drop , Ciprofloxacin0.3% + Dexamethasone 01% Eye Drop , Ciprofloxacin0.3% +Dexamethasone 0.1% Eye/Ear Drop , Citric Acid For Dialysis Machine 500Gm Powder Form , Citrosteril Sterilising Solution For Dialysis Machine (5 Ltr.Pack) , Clarithromycin 125Mg/5Ml Syp. , Clavicular Brace , Clindamycin 5% 10 Gm Gel , Clobetasol Propionate 0.05% 15Gm Oint. , Closed Suction System : Should Have Filtration System Along With Rotating Patient Access Valve To Enable Complete Isolation Of The Sleeved Suction Catheter From Patient Airway When Suctioning Is Not Required. System Should Have 03 Micron Hydrophobic Filter For Immediate Visual Identification Of Ch Size And Flushing Port Which Should Swivels 360 Degrees And Should Be Equipped With Built-In Non-Return Valve , Closed System For Hourly Urine Measurement - Closed Urine Measuring System With Graduated Transparent Chamber Starting From 1 Ml To 500Ml Capacity, Consisting Of Fine Measuring Sections With A Capacity And Two Non Return Valve,Collection Chamber. Dual Chambered 120Cm Kink Resistant Tubing, Tapered Connector With Kombicon Needle Free Sampling Port, Flexible Fastening Strap For Easy Hanging. Sterile Individually Packed In Peel Open Pack With 2 L Storage Capacity, , Clotrimazole +Tobramycin 15Gm Oint. , Clotrimazole 1% W/V + Lignocaine 2% W/V Ear Drop 10 Ml Vial Bfs/Ffs Squeeze ( 10 Ml Vial) , Clotrimazole Cream 1% 15Gm , Clotrimazole+ Lignocaine Eye Drop , Clotrimazole+Beclomethasone Ear Drop , Cloxacillin 125Mg/5Ml 30 Ml Syp. , Cockup Splint Dynamic , Cockup Splint Static , Concentrate Of Protelytic Enzyme Enriched In Bromelain 5Gm Tube , Concentrated Instrument Sterlizing Solution Containing 1, 6 Dihydroxy 2, 5 Dioxahexane 19.7 Gm And Gluteraldehyde 15.2 Gm 250 Ml , Cotrimaxazole 60Ml Syp. , Cotts Splint , Cough Expectorant 100Ml Syp. , Cough Syrup With Codeine , Cough Syrup(Dextromethorphen)100Ml , Cough Syrup(Peadirtic) 60Ml Syp. , Crammer Wire Splint , Crepe Bandage , Crutches , Cyclopentolate 1% Eye Drop 5 Ml , Cyclosporine E/D 0.05% , Dexamethasone 0.1% + Chloramphenicol 1% E/ D , Dextromethorphan 10Mg/5Ml 60 Ml Bottle Syp. , Di Sodium Hydrogen 50Ml Syp. , Diclofenac Gel( Diclofenac Dodium+Capssacin+Menthol) , Diclofenac Suppository 100Mg. , Dicyclomine Syp. 30Ml Syp. , Digoxin Syp 100Ml , Dinoprostone 0.5% 3Gm Gel , Disinfactat Hand Solution Ethanol 70W/W,Isopropyl Alcohol 10W/W,Aqua 10-19.9,Glycerin 1-1.9,T-Butyl Alcohol 1W/W,Carbomer 0.1-0.9,Aminomethyl Propanal<0.1 , Disinfecting/ Soaking Tray With Perforated Inner Liner And Lid Of Different Dimensions Made From Cx -1 Cx - 10 , Disodium Hydrogen Citrate 1.53 Gm/5Ml Syp. , Domperidon Sus.60Ml , Downs Blade , Dpi- Salbutamol + Declomethasone Inh. , Each 100 Gm Contains: Sodium Percarbonate Peroxohydrate (45Gm), Inert Ingredients (55 Gm) With En-13704, En-14476, En-14348, Pack Size - 1Kg , Each 100 Gms Contains: 2- Propanolip 40 Gm, 1- Propanol Bp22gm, Pack Size - 1 Litre , Each 100 Gms Contains: 2- Propanolip 40 Gm, 1- Propanol Bp22gm, Pack Size - 250Ml , Elbow Brace , Ensamycin Oint.50Gm , Enticavir 0.05Per Ml. 210 Ml Bottle , Erythromycin Susp.125/5Ml 30 Ml , Ethanol Ip3 % V/V, Benzalkonium Chloride Solution Ip 0.5 % V/V, Pack Size - 200Ml , Ethyl Chloride Spray 100Ml Inh. , Etiophylline+Theophylline Pead.Syp.(46.5+14Mg5 Ml) 100Ml Bottle , Eusol 500Mlfor Medicale Use , Eusol Solution 100Ml For Medicale Use , Extrication Collar Adult Adjustable : One-Piece Rigid Cervical Spine Immobilization Device With 16 Precise Settings For A Customized Fit. Flat Storage Radio Translucent, Cat & Mri Compatible ,Iso Certified , Extrication Collar Paediatric Adjustable Collar For Extrication :- Paediatric One – Piece Immobilisation Device With 12 Precise Setting In One Collar Suitable To Different Neck Sizes, Radio Translucent, Cat Mri Compatible. Iso Certified. , Fecal Management System Fecal Management System: Should Have Highly Flexible Silicone Catheter With Balloon And Two Ports For Irrigation And Inflation (45Ml), With Finger Cuff Pocket For Easy Insertion. It Should Have Odor Barriers And Must Conform To Sphincter Anatomy, Made Of Latex-Free And Pvc- Free Components, With At Least 3 Collection Bags With Odor Control. , Fluconazole Ear Drop , Fluconazole Eye Drop 3 Mg/Ml (10 Ml Vial) , Flurbiprofen Eye Drop 0.03% W/V , Flurometholone 0.1% Eye Drop , Fluticasone Nasal Spray , Fluticasone Respules 0.5Mg/2Ml Inh. , Forearm Brace , Formaldehyde (Formalin) 37% Acp 450Ml Bottle , Formaldehyde Free Suface Disinfectant, Non Carcinogenic, Non Toxic, Non Lrritant & Eco -Friendly Active Ingredients: In 100 Gms 8.8.G Glyoxal And 4.5 G Glutaral With 1% Dilution. Ce Listed & Dqsquality Certified. , Formeterol+Budesonide 120 +Mdi Inh. , Formeterol+Budesonide Rotacap 120 Mdi Inh. , Framycetin Sulphate 1 5W/W Cream , Functional Brace , Fusidum Ointmet 50Gm , Fusidun Oint.50 Gm , G Graft , Gama Benzine Hexachloride Lotion 1% 100Ml , Gatifloxacin 0. 3% Eye Drop W/V 5 Ml , Gentamycin Ear Drop+Hydrocortisone Ear Drop 15Ml , Gentamycin Eye/Ear Drop 5Ml , Gentamycin+Betamethasone Eye/Ear Drop 3% , Glacial Acetic Acid 100Ml Bottle , Glutaral Dehyde Lotion 2% W/V Stabilized 5Ltr.Cane , Glycerine 500Ml , Glycerine Enima , Glycerol 200 Gm Syp. , Glycine 1000Ml. , Hand Wash Liquid Soap Solution With Dispenser 1 Litre , Hand Wash Liquid Soap Solution With Dispenser 500Ml , Hard Surface &E Environment Disinfectat-Sporicidal 1- Aldehyde Free. 2- International Approved. Ct Time: 15 Min 3- Max. Conta. 4- Didechyl Dimethyl Ammonium Chloride 5- Dilution 2-5%. 6 - Pack Size: 1 Ltr. , Hemocoagulase Solution (0.2Cu) , Heparin Gel 50G , Hip Knee Ankle Foot Orthosis Hkafo (Calliper) , Hmf Sachet (Human Milk Fortifieer) , Hydoquinone Melalite 2% 30 Gm Oint. , Hydrocolloid Dressings: Self Adherent Moist Wound Dressing Made Up Of Triple Hydrocolloid Matrix With Elastomeric Polymer For Pressure Ulcers/Dry Wounds Size, 7.5X7.5 Cm, Oval, 15X15cm, 10X10cm , Hydrogen Peroxide Mouth Gargle 100Ml , Hydrogen Peroxide Sol. (Dilute) 400 Ml , Hydrogen Peroxide Sol.20% 400 Ml , Hydrogen Peroxide Sol.20% W/V 1Ltr.Bottle , Hydroquinone 2%+Oxybenzole 2.5%+Octinoxate 9%(Melalite 15%) 4% 20Gm E/D , Hydroxypropyl Methyle Cellulose Eye Onit. , Hydroxzine Hcl Syp. , Hygienic And Surgical Hand Disinfectant Gel Cont.Ethanol 85% With Skin Protection Factor 475 Ml-As Per En 1500 , Ibuprofen 100Mg/5Ml 60 Ml Bottle Syp. , Ibuprofen+Paracetamol 50Mg+100Mg/5Ml 30 Ml Bottle Syp. , Ice Cream Stick , Indacetrol 100 Mcg+Glycoperinium 50 Mg Inh. , Innovative Tenside System Containing 5-15% Anionic Surfectants, < 5 % Nonionic Surfectants, <5% Polycarboxylate, Enzymes. Other Excipients: Solubiliser, Corrossion Inhibitors 5000 Ml , Instrument Multi-Enzymatic Cleaners With Protease, Amylase, Lipase, Cellulase, Mananase With Pack Size - 5L , Instrument Sterilent Containing Sodium Perborate Monohydrate50 % W/Wwith Instrument Compatibility Report From Original Equipment Manufacturer Like Karl Storz/Pentax/Fujinon/Olympus With En Reports Showing Bactericidal Activity (En 14561), Yeasticidal Activity (En 14562), Virucidal Activity (En 14476), Mycobactericidal Actitivity (En 14348), Sporicidal Activity (En 13704) Pack Size - 810 Gm Bottle , Internal Nasal Splint , Ipratropium 500Mcg Respules , Ipratropium Bromide 20 Mcg Per Puff , Iron Drop 15Ml , Iron Ferrous Sulphate + Folic Acid 100Ml Syp. , Iron Syp. 200Ml , Ketoconazole 2% Lotion , Ketorolac 0.4% Eye Drop , Knee Ankle Foot Orthosis (Kafo) , Knee Brace Hinged , Knee Cap , Knuckle Bender Splint , Lactulose Solution Usp Eah 5Ml Cointains Lactulose Concentrate Usp Equivaient To Lactulose 3.325Gm Aqueous Base Q.S. , Lactulose Syp. 100 Ml , Latanoprosle E/D 40 Mg/Ml , Levocetrizine Syp.30 Ml , Levosalbutamol/Levalbuterol+Ipratropium Ruspules 3Ml , Levosulpride Syp. , Liganocaine Hydrochloride Jelly 2% 50Ml , Liganocaine Jely 4% 50Ml , Lignocaine Hydrochloride Eye Drop 4% 5 Ml Vial , Lignocaine Spray , Lignocaine Spray , Lignocaine Topical 4% Sol. , Linzolede Drop. , Liq.Ammonia , Liquid (1,2,Benzenedicarboxaldehyde) Cross Linking With Proteins And Denatures It, With Ph 7.2 -7.8 And Water Soluble With Us Fda And Epa Approved And Listed Under Tsca 5 Ltrs , Liquid Enviornment Disinfectant With Stabilizer By 0.01% W/V Agno3& H2po4 < 1Ppb And 11% W/V H2o2 Solution Formulated With A Patented Swiss Technology Having Ph 1.5 To 3.0 And 100% Volatile, Decomposing At Temperature > 100C (If Not Purified) 1 Ltr , Liquid Paraffin Ip 500Ml Bottle , Long Knee Brace , Lubricating (Hpmc) E/D , Lumbosacral Belt , Lysol (Cresol With Soap Solution) Soap , Magnisium Sulphate 50Ml , Mattress Protector : Should Made Up Of Breathable And Spacer Fibers. Breathable, Antimicrobial Finish, Elastic Fit, Washable, 36 X 72 Inches, Colour White, Blue And Green , Medial Arch Support , Metolazone Usp 5 Mg Oint. , Metronidazole Ointment , Metronidazole Syrup 100 Mg/5Ml 30 Ml Bottle , Miconazole 1% Beclamethasone Dipropionate 0.025% 15Gm Ointment , Miconazole Cream I.P. 2% W/W 15 Gm Tube , Microbicital Antiseptic Solution 1%-1.5%V/V Poly (Hexamethylene Bigunide) Hydrochloride(Phmb) Resistence Free -Ph-6.5-7.5 Pack Size 500Ml , Midazolam Spray , Milk Of Megnasia+Liquid Paraffine 100Ml , Milky White Gel Based Hand Sanitizer:- 1- Ethanol (Cas-64-17-5): 58 To 62 % 2- Benzalkonium Chloride: 05 To 1% 3- Ph:Neutral 4- Contact Time 15 Sec. 5- Pack Size: 100Ml (With Dispenser) , Milky White Gel Based Hand Sanitizer:- 1- Ethanol (Cas-64-17-5): 58 To 62 % 2- Benzalkonium Chloride: 05 To 1% 3- Ph:Neutral 4- Contact Time 15 Sec. 5- Pack Size: 500Ml (With Dispenser) , Mometasone Furoate 0.10% 10Gm Oint. , Moxifloxacin +Prednisolon 5Mh+3Mg 5 Ml Eye Drop , Moxifloxacin Eye Drop 0.5% , Multivitamin Drop 10 Ml , Mupirocin Ointment 2% W/W 5 Gm Tube , Nafazoline+Zinc,Boric Acid+Hpmc Eye Drop , Nanno Silver Gel Crytataline , Natamet Eye Drop , Neomycin Ointment 50Gm. , Neomycine Eye Oint 15 Gm , Neomycine Sulphate + Bactracin Oint 15 Gm Oint. , Neomycine-H- Oint 15 Gm , Octenidine Based Wash Lotion With Neutral Ph, Tested As Per European Norms Containing Octenidine Hcl, 150 Ml , Octenidine Based Wash Mitts With Pratical Hand Dimension, Tested As Per European Norms Containing Octenidine Hcl,Aqua, Glycerine, Cocamidopropylamine Oxide, Sodium Lactate, Allantoin, Ethylhexyl Glycerine 10 Mitts , Ofloxacin S+Metronidazole 30 Ml Syp. , Ofloxacin Susp.50Mg/5Ml 30 Ml Bottle , Ofloxacin+Dexamethasone E/D , Ofloxacine + Dexamethasone 10 Ml Eye Drop , Ofloxacine Ophthal Drop.5Ml , Ondensetron 2Mg/5Ml 30 Ml Bottle Syp. , Ors Packet Who Formula Sodium Chloride 2.6G, Potessium Chloride 1.5G, Sodium Citrete 2.9G Dextrose Inhydrous13.5G, 20.5 Gm Pouch , Oxymetazole Nasal Drops , Paracetamol Drop 100Mg/15Ml , Paracetamol Syp.125Mg/5Ml 60 Ml Syp. , Patient Cautery Plate , Patient Cautery Point , Patient Transfer Device: It Should Be Antimicrobial, Water Proof, Gamma Sterile And Durable. 92 Gsm, Dimension: 1200Mmx1800 Mm, Colour: Whit: Thickness: 0.4Mm , Permethrin 2% 15Gm Lotion , Phenobarbitone 60 Ml Syp. , Phenylepherine Hci+Tropicamide 5% + 1% 5Ml E/D , Phenylephrine Hydrochloride 2.5Mg, Chlorpheniramine Maleate Ip 1 Mg, 15 Ml Bottle Syp. , Phenylephrine Hydrochloride 5 Mg, Chlorpheniramine Maleate Ip 1 Mg, Menthol 1 Mg. 60 Ml Bottle Syp. , Phenytoin Sodium Syp. 25Mg/Ml 100Ml Bottle , Philadelphia Collar , Pilocarpine Eye Drop 2% , Pilocarpine Eye Drop 4% , Pot.Chloride Syp. 100Ml , Povidon Iodine 5% Eye Drop. , Povidone Iodine 10% 100Ml Bottle , Povidone Iodine 5% 100Ml Bottle , Povidone Iodine 5% 500Ml Bottle , Povidone Iodine Hand Scrub 7.5% 500 Ml , Povidone Iodine Ointmet 5% 500Gm.Jar , Povidone Iodine Ointmet 7.5% 500Gm.Jar , Povidone Iodine Sol. 7.5% 500Ml Bott. , Povidone Iodine Surgical Scrub 500Ml Bottle , Povidone Iodine Surgical Scrub 7.5% 500 Ml , Prednisolone Acetate 0.1% E/D , Prednisolone Syp.30Ml , Promethazine Syp.5Mg/5Ml 30 Ml , Protease Based Enzymatic Cleanerwith Instrument Compatibility Report From Original Equipment Manufacturer Like Karl Storz/Pentax/Fujinon/Olympus Pack Size - 1 Litre Bottle , Protein Powder 200Gm , Quinine Sulphate 150Mg/5Ml 60 Ml Bottle Syp. , Recombinant Human Epidermal Growth Factor Gel Presentation: 15 Gm Route Of Administration: For External Use Only Composition: Each Gram Contains: Purified Bulk Of Rh-Epidermal Growth Factor ........ 150 ?G Sodium Methylparaben Ip ............ 1.8 Mg Sodium Propylparaben Ip ........... 0.2 Mg Excipients ............Q.S , Recombinant Human Epidermal Growth Factor Gel Presentation: 15 Gm Route Of Administration: For External Use Only Composition: Each Gram Contains: Purified Bulk Of Rh-Epidermal Growth Factor ........ 60 ?G Sodium Methylparaben Ip ............ 1.8 Mg Sodium Propylparaben Ip ........... 0.2 Mg Excipients ............Q.S +B5b7b2:B6b2:B6b7b2:B6b2:B7b2:B6 , Recombinant Human Epidermal Growth Factor Gel Presentation: 7.5 Gm Route Of Administration: For External Use Only Composition: Each Gram Contains: Purified Bulk Of Rh-Epidermal Growth Factor ........ 150 ?G Sodium Methylparaben Ip ............ 1.8 Mg Sodium Propylparaben Ip ........... 0.2 Mg Excipients ............Q.S , Recombinant Human Epidermal Growth Factor Gel Presentation: 7.5 Gm Route Of Administration: For External Use Only Composition: Each Gram Contains: Purified Bulk Of Rh-Epidermal Growth Factor ........ 60 ?G Sodium Methylparaben Ip ............ 1.8 Mg Sodium Propylparaben Ip ........... 0.2 Mg Excipients ............Q.S , Sacubitril/Valsartan 50Syp. , Salbutamol + Declomethasone 200Mdi Inh. , Salbutamol 40 Mg+Ipratropium 200 Mcg Inh. , Salbutamol Rotacap 200Mcg. Inh. , Salbutamol Solution For Nebulizer 5Mg/Ml Inh. , Salbutamol Sulphate Inhalation Inh. , Salbutamol Syrup 2Mg/5Ml 100 Ml Bottle , Salicylic Acid 500Gm Pow. , Salicylic Acid Ointment 6% Oint. , Salmeterol25 Mcg +Fluticasone 125 Mcg Inhaler 120 Mdi Inh. , Shoulder Immobilizer , Silicon Heel Pad , Silk Protein And Antimicrobial Silver Based Wound Cleaning, Irrigating And Disinfectant Solution Spray 250Ml , Silver Nitrate Menthol Tween 20 Glycerol Tris Buffer 100Ml , Silver Nitrate Menthol Tween 20 Glycerol Tris Buffer 200Ml , Silver Sulfadizine Cream Usp 1% W/W 250Gm , Silver Sulfadizine Cream Usp 1% W/W 500Gm , Single Proteolytic Enzyme Subtilism 1-10% And Propylene Glycol 20-30%-Water Soluble Low Foaming Presoak Cum Cleaner, Bio-Burden Reducer. Boiling Point > 100 C With Neutral Ph In 1 Ltr Pack 1 Ltrs , Skin Antiseptic Tincture Of 2%W/W Chlorhexidine Gluconate With 70% Ethyl Alcohol Preparation 500 Ml , Skin Traction Kit , Small Foam Pu Dressing Kit Pu Form 12.5X18x3.3 Cm, Self Adhesive Drainage Tube With Irrigation Tube Adhesive Pu Drape ( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Small Foam Pu Dressing Kit Pu Form 12.5X18x3.3 Cm, Self Adhesive Drainage Tube With Irrigation Tube Adhesive Pu Drape ( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Small Foam Pu Dressing Kit Pu Form 7.5X10x3.3 Cm, Self Adhesive Drainage Tube With Irrigation Duct. Adhesive Pu Drape.( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Small Foam Pu Dressing Kit Pu Form 7.5X10x3.3 Cm, Self Adhesive Drainage Tube With Irrigation Duct. Adhesive Pu Drape.( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Soda Lime 5 Kg. Cane , Sodium Chloride 5% 10 Ml Eye Drops , Sodium Chloride 6% Eye Ointment Oint. , Sodium Furidate 10Gm Oint. , Sodium Fusidate 2% 10Gm Oint. , Sodium Hypochloride 5% 1Ltr. , Sodium Hypochloride Solution 4% 5Ltr. Cane , Sodium Percarbonate 50%W/W Powder Mix, Pack Size - 1.5Kg , Sodium Percarbonate 50%W/W Powder Mix, Pack Size - 800Gm , Sodium Valporate 200 Mg/5Ml 100 Ml Bottle Syp. , Sodium Valprovate 200Mg/5Ml 100 Ml Syp. , Soframycin Crem 30 Gm , Steenbeck Brace , Sterilant Cold Disinfectant For Dialysis Containing Peracetic Acid Hydrogen Peroxide Acetic Acid(5 Ltr Can) , Sterilant Hot Disinfectant For Dialysis Containing 21% (Approx) Citric Acid, Malic Acid, Lactic Acid(5 Ltr Can) , Sterisol-C (Electrolyte Concentrate Soln.) (5 Ltr.X4 ) 20 Ltr.Pack , Sucralfate 1Mg/Ml 100 Ml Syp. , Sucralflate Susp.100Ml , Sulfacetamide Eye Drop 20% , Sulfamethoxazole+Trimethoprim Susp0200mg+40Mg In 5Ml 60 Ml Syp. , Sulfamethoxazole200 Mg + Trimethoprim 40 Mg Per Ml Syrup 50 Ml Bottle Syp. , Sumag Ointment 30 Gm Oint. , Surface & Environment Disinfectant –Critical Area 1-Aldehyde Free 2-Us-Epa Approved 3-Max.Contact Time: 10 Min. 4. -Octyl Decyl Dimethyl Ammonium Chloride- 6 To 7% Dioctyl Dimethyl Ammonium Chloride- 2 To 3% Didecyl Dimethyl Ammonium Chloride- 3 To 4% Alkyl Dimethyl Benzyl Ammonium Chloride- 8.68% 5-Dilution 0.39% 6--Pack Size: 1 Ltr. , Surface Cleaning Wipes : Polymeric Biguanide Hydrochloride 0.02 % Alkyl Dimethyl Benzyl Ammonium Chloride& Didecyl Dimethyl Ammonium Chloride0.09 % With En-16615 ( 4-Field Test), Pack Size - 150Mm X 200Mm,Pack Size - 50 Wipes In A Box , Surface Disinfectant Containing Polymeric Biguanide Hydrochloride (<10%), Alkyl Dimethyl Benzyl Ammonium Chloride (Bkc) & Didecyl Dimethyl Ammonium Chloride (<10%) With En Reports Showing Thermal Textile Disinfection (En 16616), Bactericidal And Fungicidal (En 13697) & Virucidal Activity (En 14476) Pack Size - 5 Litre , Surface Disinfectant Containing Polymeric Biguanide Hydrochloride (<10%), Alkyl Dimethyl Benzyl Ammonium Chloride (Bkc) & Didecyl Dimethyl Ammonium Chloride (<10%) With En Reports Showing Thermal Textile Disinfection (En 16616), Bactericidal And Fungicidal (En 13697) & Virucidal Activity (En 14476) Pack Size - 1 Litre , Surface Disinfectant Containing Potassium Peroxomonosulphate 50% W/W With En Reports Showing Bactericidal (En 13727), Fungicidal (En 13624), Virucidal Activity (En 14476) Pack Size - 500G , Surface Disinfectant Containing Potassium Peroxomonosulphate 50% W/W With En Reports Showing Bactericidal (En 13727), Fungicidal (En 13624), Virucidal Activity (En 14476)Pack Size 5 Kg , Surface End Environment Disinfectant Conc.With Dimethanol 14.1 G And Gluteraldehyde 5 Gm 500Ml , Surgical Scrub Containing 0.5% W/W Hexachlorophene And Moisturiser 500Ml , Surgical Sprit Bp- 5 Ltr.Cane , Surgical Sprit Bp-500Ml Bottle , Synthetic Casting (Fibreglass) 6 , Synthetic Casting(Fibreglass) 4 , Syp.Vitamin A 10000U/Ml (100Ml Bottle) , Tacrolimus 0.03% 10Gm Oint. , Taylors Brace , Terbinafine Hydrochloride 1% 10Gm Oint. , Theophylline 100Mg/10Ml Syp. , Thomas Splint , Thrombo Phobe Oint.15Gm , Thumb Abduction Splint , Timolol Maleat 05% 5Ml Vial Eye Drop , Tinidazole 150 Mg/5Ml 60 Ml Bottle Syp. , Tinture Benzoin Compound Solution , Tobramycin.03% 5 Ml Eye Drop , Tobramycine 0.3% +Dexamethasone .01% Eye Drop , Toe Spacer , Tolnafrate+Iodochlorhydroxyquin 5Gm Oint. , Tretinoin 0.025% 15Gm , Tricholine Citrate 0.550 Mg Sorbitol 7.15 G/10Ml 100 Ml Bottle Syp. , Triclophos 500Mg/5Ml Syp. , Tropicamide Eye Drop 1% 5Ml Vial , Turn Buckle Splint , Ventriculoperitoneal Shunt High Pressure , Ventriculoperitoneal Shunt Low Pressure , Ventriculoperitoneal Shunt Medium Pressurepressure , Vitamin D3 Drop , Vitamin E Drop 10 Ml , Walker , Walking Stick , White Petroleum Jelly 1000G , Wound And Mucous Membrane Antiseptic Solution Containingoctenidine Dihydrochloride 0.1%W/V, 2-Phenoxyethanol 2.0% W/V With En Reports Showing Bactericidal Activity (En 13727), Fungicidal Activity (En 13624) Pack Size - 500 Ml Bottle With Dispenser , Wrist Brace , Xylometazoline Nasal Drop 0.1% , Lab. Items , Albumin 100Ml , Alkaline Phospahatase 100Ml , Anti-A1 Lactin 5Ml Vial , Anti-Ab-Sera 5Ml Vial , Anti-A-Sera Igm 10Ml Vial , Anti-B-Sera Igm 10Ml Vial , Anti-D-Sera Igg+Igm 10Ml Vial , Anti-D-Sera Igm 10Ml Monoclonal , Anti-H-Sera 10Ml Vial , Auto Disable Syringe Integrated Without Fix Needle 2Ml , Auto Disable Syringe Integrated Without Fix Needle 5Ml , Baby Care Sheets : Super Absorption Surface, Spill Proof, Antimicrobial Finish, Easy To Wash, Size: 0.7M X 0.5 M , Bacitracin+Neomycin+Polymyxin B Powder , Bacterial Filter ( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Bb Silk With 1/2 Cir.Rb Needle 25Mm Length 75 Cm- 3/0 , Bilayer Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 2Iinx2 In) , Bilayer Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 4Iinx10 In) , Bilayer Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 4Iinx5 In) , Bilayer Meshed Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 2Iinx 2 In) , Bilayer Meshed Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 4Iinx 10 In) , Bilayer Meshed Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 4Iinx 5 In) , Bilayer Meshed Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 8Iinx 10 In) , Bilirubin T+D 100Ml , Blood Bag Single 350Ml , Bovine Albumin 5Ml Vial , Calcium 50Ml , Chikengunea Elisa Test , Chikengunea Rapid Test , Coombs Ahg Sera 5Ml Vial , Creatinine 100Ml , Deionized Water 5Ltr.Cane , Dengue Elisa Test , Dengue Rapid Test( Antigen + Antibody) , Diclofenac Diethylamine Bp1.16% W/W Equivalent To Diclofenac Sodium Bp 1% W/W Gel Base Q.S. , Disposable Flexible Video Bronchoscope: Monitor 8.5 Inches Color Tft Lcd Screen With Touch Operation. With 8 Gb Of Internal Storage. 3 Hrs Of Battery Operation, Data Storage Capability, Usb Facility, Compatible With Plug And Play Flexible Scopes Of Inner Diameter Of 1.2, 2.2 & 2.8Mm. , Double Blood Bag 350Ml Cpda , Double Blood Bag 450Ml Cpda , Drevkins Reagent 5 Ltr.Cane , E.D.T.A. Vacunater With Needle 3Ml , E.D.T.A.(K-3) Vial 3Ml , Flexiseal (Fecial Management System Should Have Highly Flexible Silicon Catheter With Ballon And Two Ports Of Irrigation And Infleation (45Ml) With Finger Cough Pocket. It Should Have Odor Barrier. Latex Free Pbc Free With Atleast Three Collection Bag With Odor Control ) , Glass Ionomer Dental Cement- For Luting , Glass Ionomer Dental Cement- For Restoration , Glass Slides (75Mm X 25Mm ) , Glucose 500Ml , Gv Paint , Hbs Ag Elisa 96 Test Kit , Hbs Ag Rapisd Card Test , Hcv Rapid Cad Test , Hiv Elisa Kit (Hiv Micro Elisa Ag+Ab 4Th Generation) 96 Test Kit , Hiv Elisa Kit (Hiv Micro Elisa Ag+Ab 4Th Generation) 96 Test Kit , Hiv Rapid Card Test , Hiv Rapid Test ( Ag+Ab 4Th Generation) , Hiv Rapid Test (Flowthrouh) , Hospital Curtain: 100% Polyester, Flame Retardant, Antimicrobial, Water Repellent, Antistatic, Anti-Dust, Mould Proof, Strain Relief. , K3 Blood Vaccutainer Edta-Vial , Kangaroo Mother Care : Breathable Fabric, Skin To Skin Contact Between Mother And Baby, Hands Free Mode To Perform Daily Activity, Sterlized, Washable For Multiple Use. Size, Small, Medium And Large Colour, Melange, Baby Pink, Blue , Lactic Acidbacillus Sachet , Leishmans Stain 500Ml Bottle , Malaria Card Test Pv/Pf Antigen , Manual Rescitator With Built In Pressure Limitation ( Adulat With Face Mask Of Size ¾ And 5 Tidal Volueme 1300 Ml Autoclave Reservoir Bag 1500 Ml 100% Latex Free Double Layred Single Shutter Value, Hand Strap, Minimum 25 Time Autoclavabele ) , Manual Resuscitators With Built In Pressure Limitation – Paediatric/Neonate With Face Mask Of Size 0 & 2 Max. Tidal Volume - 300 Ml; Auto Clavable Reservoir Bag With Volume - 1500 Ml/Volume 100% Latex Free Outer Cover & Double Layered. Single Shutter Valve, Integrated Hand Strap, Autoclavable Upto 25Times Minimum With Supporting Documents/Test Reports ,Pressure-Limiting Valve ,Provision To Attach Pressure Manometer And Peep Valve, Usfda ,Ce & Iso Certified , Micropipette 1Ml , Micropipette Tips 10 Ml , Micropipette Tips 100Ml , Micropipette Tips 20 Ml , Micropipette Tips 200Ml , Micropipette Tips 50 Ml , Ointment Containing Centella Asiatica Extract: Nlt 0.6% With Sliver Oxide: 1.2% & Silk Extract 8% : 46% 100Gm Jar Oint. , Paediatric Blood Bag 100Ml , Penta Blood Bag 350Ml , Plain Disposable Vial 3Ml , Plain Vial 12X75 With Screw Cap , Pre Sterile Flexible Video Scope For Visualization: Fibreless Video Scope Available With Three Optional Sizes Of Inner Diameter 1.2Mm, 2.2Mm & 2.8Mm With Working Length Should Be 600Mm. Should Have Suction Port & Oxygen Delivery Port. Should Be Compatible With Monitor Size Of 8.5. Iso Compliant, European Ce Or Usfda. , Pricking Lancet , Protein 1Ml , Quardraple Blood Bag 350Ml , S Got 100Ml , Sgpt100ml , Supraglotic Airway Device With Integrated Gastric Port And Intubation Capabilitry Reinforced Tip With Gastric Drainage Port And Intubating Laryngeal. Pilot Balloon Withtactile Indication, Mri Safe And Phthalate Free Material. Integrated Bite Absorption Area. Soft & Thin Cuff & Available With Sizes 1,1.5,2,2.5,3,4,5,6 Usfda Ce & Iso Certified , Tacrolimus0.5 , Test Tube 100X12mm Borosilicate , Tips For Micro Pipette(2-1000Ul) 1000 Nos , Tips For Micro Pipette(2-200Ul) 1000 Nos , Tissue Paper Roll , Transfer Blood Bag 300Ml , Triple Blood Bag 350Ml Cpda , Triple Blood Bag 350Ml Sagm , Triple Blood Bag 450Ml Cpda , Triple Blood Bag 450Ml Sagm , Typhoid Rapid Card (Igg+Igm) , Urea 100Ml , Vdrl Rpr Test , Wound Dressing Poly Utherin Foam Containing Centella Asiatica Extract: Nlt 0.6% With Silk Protein: 8% & Pva: 0.22%Silver Oxide 1.2% & Ploysorbate 80: 0.15% & Glycerol: 1.52% Pu Foam 10X10 Cm , Y Connector (Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Dental Items , 2% Chlorhexidine Disposable Disinfectant Wipes,0.5% Accelerated Hydrogen Peroxide, Size: 7 X 8 Us Fda Certified , 2) K Files-- 20 (21Mm) , 47% Parachloropherol +5 % Phenol And 38% Lignocaine Base Pulp Devitalizer For Root Canal Therapy , Addition Silicon Impression(Material To Be Suplied With Both Heavy And Light Body) , Amalgam Polishing Kit , Articulating Strips , Assimilatory Roll 37Gsm With Perforation , Biodegradable Material , Autoclavable S.S Bur Box , Autoclavable S.S Endo Box , B) Medium , B) Taper Long(Pointed) , B)Wedges Plastic , Biocampatible Fda Approved Collagen Membrane , Bone Graft Hydroxyappetite + Beta Tricalcium Phosphate , Brushes(For Post Scaling Polishing) , C) Inverted Cone , C) Small , C)Wedges Transparent Light Transmitting , Calcium Hydroxide And Iodoform Paste , Calcium Hydroxide Dental Cement Powder , Cheek Retractor- Large & Small , Composite Polishing Kit , Condensation Silicon Impression (Material To Be Suplied With Both Heavy And Light Body) , Contains Diclofenac Diethyolamoniummgel Bp 1.16% W/W Equivalent To Diclofenac Sodium Bp 1.0% W/W In A Gel. , D) Round , Denta Plug Bioactive Resorbable Graft With Collagen, Hydroxylapatite And Chlorhexidine , Denta Plug- C Absorbable Collagen Hemostat With Boric Acid And Furacillin , Diamond Burs For Crown Preparation A) Straight Long , Diclofenac Sodium Ip 50Mg Gelatin Enrobed (Softlet) Enteric Coated , Didecyl Dimethyl Ammonium Chloride : 8.7%, N-Alkyl Dimethyl Benzyl Ammonium Chloride : 8.19%, Lauryl Amine Amine Oxide:0.1-1.5%, Ethylene Diamine Tetra Acetic Acid Sodium Salt, Sodium Bicarbonate,Us Epa Certified , Disinfectant For Medical Devices- Optho Phthaladehyde 0.55%W/V 5 Liter Can. , Disposable Patient Drapes , E) Taper Long(Flattened) , Edta Syringe For Root Canal , Endodontic Files- 1) K Files--#15 (21Mm) , Enzymatic Cleaner For Dental Instruments Mixture Of Protease, Amylase,Lipase,Celluase 39%. 1 Liter Bottle , F) Chamfer Or Torpedo Point , Fogging Solution - N Alkyldimetyl Benzyl Ammonium Chloride (Bkc) Ip-13.6% W/V, Didecyl Dimethyl Ammonium Chloride 13.0% W/V, Polymeric Biguanide Hydrochloride (Phmb)-5.0% 1 Liter Bottle. , Freeze Dried Bone Graft , Freeze Dried Demineralized Bone Graft (Fddb) , G) Flare Shaped , Gates Glidden Drills(Number 1 To 6) , Glass Ionomer Dental Cement- For Luting , Glass Ionomer Dental Cement- For Restoration , Gutta Percha Hand Protaper F1 (21Mm) , Gutta Percha Hand Protaper F1 (25Mm) , Gutta Percha Hand Protaper F2 (21Mm) , Gutta Percha Hand Protaper F2 (25Mm) , Gutta Percha Hand Protaper F3 (21Mm) , Gutta Percha Hand Protaper F3 (25Mm) , Gutta Percha Hand Protaper S1 (21Mm) , Gutta Percha Hand Protaper S1 (25 Mm) , Gutta Percha Hand Protaper S2 (21Mm) , Gutta Percha Hand Protaper S2 (25Mm) , Gutta Percha Hand Protaper Sx (21Mm) , Gutta Percha Hand Protaper Sx (25Mm) , Gutta Percha K File 15 (21Mm) , Gutta Percha K File 15 (25Mm) , Gutta Percha K File 20 (21Mm) , Gutta Percha K File 20 (25Mm) , Gutta Percha K File 25 (21Mm) , Gutta Percha K File 25 (25Mm) , Gutta Percha K File 30 (21Mm) , Gutta Percha K File 30 (25Mm) , Gutta Percha K File 35 (21Mm) , Gutta Percha K File 35 (25Mm) , Gutta Percha K File 40 (21Mm) , Gutta Percha K File 40 (25Mm) , Gutta Percha K File 45 (21Mm) , Gutta Percha K File 45 (25Mm) , H Files --15 (25Mm) , H Files --20 (25Mm) , H Files --25 (21Mm) , H Files --25(25Mm) , H Files --30 (21Mm) , H Files --30 (25Mm) , H Files --35 (25Mm) , H Files --35(21Mm) , H Files --40 (25Mm) , H Files --40(21Mm) , H Files --45 (21Mm) , H Files --45 (25Mm) , H) Disc , Hand Protapers F1 (21Mm) , Hand Protapers F1 (25Mm) , Hand Protapers F2 (21Mm) , Hand Protapers F2 (25Mm) , Hand Protapers F3 (21Mm) , Hand Protapers F3 (25Mm) , Hand Protapers S1 (21Mm) , Hand Protapers S1 (25Mm) , Hand Protapers S2 (21Mm) , Hand Protapers S2 (25Mm) , Hand Protapers Sx (21Mm) , Hand Protapers Sx (25Mm) , Hydroxy Apatite Bone Graft , Intra Articuler Hyaluronic Acid Visco Supliment 22Mg/Ml , K Files --15 (25Mm) , K Files --20 (25Mm) , K Files --25 (21Mm) , K Files --25(25Mm) , K Files --30 (21Mm) , K Files --30 (25Mm) , K Files --35 (25Mm) , K Files --35(21Mm) , K Files --40 (25Mm) , K Files --40(21Mm) , K Files --45 (21Mm) , K Files --45 (25Mm) , Kidney Trays , Ligt Curing Nano Hybrid Composite Kit , Matrix Bands-Ivory No 8 , Matrix Retainer- Tofflemaire , Oxidized Cellulose Hemostat 5 X 7.5 Cm , Periodontal Dressing Pack (Coe Pack) , Plastic Instrument Holding Trays- A) Large , Plugger 15 (21Mm) , Plugger 15 (25Mm) , Plugger 20 (21Mm) , Plugger 20 (25Mm) , Plugger 25 (21Mm) , Plugger 25 (25Mm) , Plugger 30 (21Mm) , Plugger 30 (25Mm) , Plugger 35 (21Mm) , Plugger 35 (25Mm) , Plugger 40 (25Mm) , Plugger 45 (21Mm) , Plugger 45 (25Mm) , Plugger40 (21Mm) , Polishing Paste After Composite , Polishing Paste After Scaling , Proximal Polishing Strips For Composite , Reamers 15 (21Mm) , Reamers 15 (25Mm) , Reamers 20 (21Mm) , Reamers 20 (25Mm) , Reamers 25 (21Mm) , Reamers 25 (25Mm) , Reamers 30 (21Mm) , Reamers 30 (25Mm) , Reamers 35 (21Mm) , Reamers 35 (25Mm) , Reamers 40 (21Mm) , Reamers 40 (25Mm) , Reamers 45 (21Mm) , Reamers 45 (25Mm) , Rubber Cups (For Post Scaling Polishing) , Rubber Dam Kit , Silver Powder , Spreader 15 (21Mm) , Spreader 15 (25Mm) , Spreader 20 (21Mm) , Spreader 20 (25Mm) , Spreader 25 (21Mm) , Spreader 25 (25Mm) , Spreader 30 (21Mm) , Spreader 30 (25Mm) , Spreader 35 (21Mm) , Spreader 35 (25Mm) , Spreader 40 (21Mm) , Spreader 40 (25Mm) , Spreader 45 (21Mm) , Spreader 45 (25Mm) , Sterilization Roll Autoclavable 75Mm , Sterilization Roll/ Pouch Sealing Machine , Teeth Bleaching Kit , Torque Controlled Endomotor With Handpiece , Vita Shade Guide , Wedges A) Wooden , Zinc Oxide Eugenol Temporary Restorative Dental Material , Zinc Phosphate Dental Cement , Zinc Polycarboxylate Dental Cement , Intraoculer Lenses , (Pciol) Lens 12.0 , (Pciol) Lens 14.0 , (Pciol) Lens 15.0 , (Pciol) Lens 16.0 , (Pciol) Lens 17.0 , (Pciol) Lens 18.0 , (Pciol) Lens 19.0 , (Pciol) Lens 19.5 , (Pciol) Lens 20.0 , (Pciol) Lens 20.5 , (Pciol) Lens 21.0 , (Pciol) Lens 21.5 , (Pciol) Lens 22.0 , (Pciol) Lens 22.50 , (Pciol) Lens 23.0 , (Pciol) Lens 23.5 , (Pciol) Lens 24.0 , (Pciol) Lens 24.5 , (Pciol) Lens 25.0 , (Pciol) Lens 25.5 , (Pciol) Lens 26.0 , (Aciol) Lens 18.0 , (Aciol) Lens 19.0 , (Aciol) Lens 20.0 , (Aciol) Lens 21.0 , Sfiol) Lens 19.0 , Sfiol) Lens 20.0 , Sfiol) Lens 20.5 , Sfiol) Lens 21.0 , Sfiol) Lens 21.5 , Sfiol) Lens 22.0 , Sfiol) Lens 22.5 , Sfiol) Lens 23 , Sfiol) Lens 23.5 , Sfiol) Lens 24
Contract Date: Apr 02, 2025 Contract Value : ₹ 2.00 Crore
Government Departments No of Bidders 20
Madhya Pradesh View Result →
27.
Defence #7185260 AOC
Tender For Additional / Alternator To Building No P 166 At Afs Jalhalli And Special Repair Against Ber E M Equipments; 1 Demolition of reinforced cement concrete in floors, beams, chajjas, landing slab in any position or height and similar suspended works (reinforcement cut as required to facilitate demolition) complete all as specified and directed. 2 Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete complete all as specified and directed. 3 Taking down cement plaster from old wallsand raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. 4 Taking down cement plaster fromceiling surfaces and racking out joints hacking for key, scrubing down with water etcbuilt in cement mortar complete all as specified and directed. 5 M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring finished fair and even without using extra cement complete all as specified and directed. 6 M&Lreinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in slabs supported on wallsand finishing exposed surfaces fair & evenall as specified and directed. 7 Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. 8 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished surfaces complete all as specified and directed. 9 M&L for brick work with sub class B bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified and directed. 10 M&L for taking down of existing sunken slab treatment from the sunken portion and removing of existing filling of sunken, cleaning the surfaces washing down with water and rubbish off the primises, cleaning and filling cracks with sealing compound, brushing neat cement [email protected]/sqm and providing 25mm thick cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) on sunken slab portion. M&L for applying two coat of acrylic cementitious water proofing coating (Dr FIXIT pidfin 2K manufactured by M/s Pidilite industries Ltd or equivalent) and followed by a overlay protective rendering 15mm thick in CM (1:3) alongwith liquid water proofing compound of approved make and including filling of brick bats and finishing the top surfaces even and smooth without using extra cement . Sunken slab after prepration as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufacturer instructions complete all as specified and directed. 11 M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc complete all as specified and directed. 12 M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even using integral water proofing compound all as per manufactures instruction complete all as specified and directed. 13 M&L for Sadarahalli Stone (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing using 20mm screed bed in CM 1:6 including dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. 14 M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 15 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 16 Taking down Chowkhat or framesexceeding 1.5 Sqmbut not exceeding 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. 17 Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. 18 Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and directed. 19 S&F 35 mm thick 2nd class hardwood factory madeplain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedboard medium density, wood particle board with commercial face vineers complete all as specified and directed. 20 S&F 30mm thick flush shutter, solid core construction with block board core and ply wood face panel, commercial type on both side complete all as specified and directed. 21 S &F2nd class hardwood 35mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and directed. 22 Providing & Fixing of UPVC glazed 2 track-2 panel sliding windows made out of multi chambered uPVC sections with TPE gaskets having isolated drainage and reinforced with Galvanized iron profiles through the window. The outer frame having an overall size of 60 x 48 mm with reinforcement of 1mm thickness and sash with overall size of 38x61mm with reinforcement of 1.2 mm thickness, Glazing bead for fixing of glass shall be of size 16 x 19mm. Windows will be provided with 5mm plain float glass, with necessary hardware & single point locking system of flush lock. Wall thickness of frame & sash shall be 2-2.2mm complete all as specified and directed. 23 Providing & Fixing of UPVC glazed 3 track-2 panel sliding windows with mesh made out of multi chambered uPVC sections with TPE gaskets having isolated drainage and reinforced with Galvanized iron profiles through the window. The outer frame having an overall size of 108 x 48 mm with reinforcement of 1.2mm thickness and sash with overall size of 38 x 61 mm with reinforcement of 1.2 mm thickness mesh sash of overall size 38 x 58mm Fiber mesh reinforced with 1.2 mm of GI. Glazing bead for fixing of glass shall be of size 16 x 19mm and TPV gasket. Windows will be provided with 5mm plain float glass, with necessary hardware & Single point locking system of flush lock. Wall thickness of frame & sash shall be 2-2.2mm complete all as specified and directed. 24 S&F powder coated any colour(minimum thickness of powder coating 50 micron)anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc and aluminium grills for windows complete all as specified and directed. 25 S&Fpowder coated any colour(minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. 26 M&L for 19mm thick both side prelaminated PVC moulded shutter including 2mm thick PVC sheet Lipping with EPS lined as in cupboard as specified and directed . 27 S & F Stainless Steelwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainles steelwire staples complete all as specified and directed. 28 S & F 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 29 S & F 250 mm mild steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. 30 S&F mild steel 300 mm, long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 31 Supply & Fixing150 mm Aluminium handles, cast type, anodised complete all as specified and directed. 32 S & F 125 size Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. 33 M & L for mild steel powder coated pelmet rods 25mm outer dia including 2 Nos of brackets 2 Nos of pintals or side brackets as per site requirement complete all as specified and directed. 34 M&L floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm complete all as specified and directed. 35 Supply and fix 4.80mm thick plain glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. 36 M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying twocoat of synthetic enamel paint over a coat of pink wood primerall as specified and directed 37 M&L for prepration of oldsteel surface and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. 38 S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 39 M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. 40 Rendering 5mm thick in CM (1:3) on ceiling on fair faces of brick work or concrete surfaces & finished even and smooth without using extra cement complete all as specified and directed. 41 M&L for Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed bed in CM 1:6, complete all as specidied and as directed. 42 M&L for Glazed ceramic tiles invertical surface of size 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc and dismantling any floor, hearth or wall tiling including cement mortar bedding (but not backing), removingrubbish off the premises complete all as specified and as directed. 43 Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard/dense soil,returning, filling in and ramming earth or broken rubble mixed with earth ground, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. 44 Supply and fixing MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290, Gde-E-165 complete all as specified and directed. 45 Supply and fixing of MS fencing posts/struts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 46 Material and labour for Cement Concrete 1:3:6 type C2 (using 40 mm gradedcrushed stone agg as in fdn of posts water troughs and the like including weathering,slightly rounded or chamfered angles and throating, complete all as specified and directed. 47 Supply only Chain link MS galvanised fencing any size or type complete all as specified and directed. 48 Fixing only Chain link fencing including line wires any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified and directed. 49 Supply and fixingMS round bars/strengthening bar 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm & backing ends and binding with & include MS wire (anealed ) not less than 0.90 mm dia or securing with clips quality confirming to Fe-410W(grade E-250)Quality A or Fe 290 (gde-E-165) complete all as specified and directed. 50 Supply and fixingFlat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0 complete all as specified and directed. 51 S&F MS tube /Square bars/Angle square bar iron using various section such as poles, rafters, purlins, ladders and cleats all as specified and directed. 52 S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed. 53 M&L for preparation of new steel surfaces and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide/ primer complete all as specified and directed. 54 Material & Labour for preparation of new plasteredsurfaces of ceilingand applying three coat of white (lime) wash complete all as specified and as directed. 55 Material & Labour for preparation of old surfaces of ceiling(Plastered or unplastered surfaces) and applying one coat of white (lime) wash complete all as specified and as directed. 56 M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying onecoat of synthetic enamel paint complete all as specified and directed. 57 M&L for Complete removal of existing treatment on new /old plastered sufrfaces and applying water proof cement base putty of average thickness 1mmand make the surface free from dust and applying two coats of oil bound emulsion distemper over one coat of interior wall care primer complete all as specified and directed. 58 S&F for 8 feet 4 pipespulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm,made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit . Make : Easydry or equivalent make. 59 Provn of modular kitchen of cabinet with depth of 600 using 16-18mm plywood with factory pressed laminate (1mm colour laminate external and fabric textured 0.5mm internal) and 1mm PVC edge binding on every edge of the frame complete all as specified and directed. 60 S&F Auto closing hinges 35mm of 0 crank for kitchen cabinet shutter fixtures and all as specified and directed. 61 S&F Auto closing hinges 35mm of 8 crank for kitchen cabinet shutter fixtures and all as specified and directed. 62 S&F Auto closing hinges 35mm of 120 crank for kitchen cabinet shutter fixtures and all as specified and directed. 63 S&F Ball bearing runners 500mm Telescopic full load extension load capacity of 50 kgs fixed on basket and cabinet walls complete all as specified and directed. 64 S&F Stainless steel handles 150mm size for kitchen cabinet shutters and all as specified and directed. 65 S&F Chromium plated stainless steel wire basket (storage basket ) pull out type , size 940x580x580mm of grade 304 with necessary fixing clips etc and all as specified and directed. 66 S&F Chromium plated stainless steel wire basket (cutlery basket ) pull out type, size 480x500x100mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. 67 S&F Chromium plated stainless steel wire Bottle pull out basket (storagebasket) pull out type, size 100x150x750mm of grade 304 with necessary fixing clips etc complete all as specified and directed. 68 S&F Chromium plated stainless steel wire Thali basket (storagebasket) pull out type, size 480x150x200mm of grade 304 with necessary fixing clips etc complete all as specified and directed. 69 S&F Chromium plated stainless steel wire saucer basket (storagebasket ) pull out type, size 480x500x150mm of grade 304 with necessary fixing clips etc fixed complete all as specified and directed. 70 S&F Double bowl kitchen sink made of stainless steel 1mm thick with plugs, washer and wastes including fixing in cement mortor 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 940x455mm,bowl size 405 mmx 355 mmx 200 mm including CP waste coupling complete all as specified and directed. 71 Dismantling of boarding, any description, fixed in any position with nails (in floor etc) complete all as specified and directed. 72 M&L for factory made WPC single extruded board of 18mm thick prelaminated shutter for cupboard prelaminated side with different density and other side plain with density not less than 600kg/cum the 18mm board should be 100% lead free water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified cupboard cabinet and including necessary fittings like hinges handle and hanging rod all as specified and directed. 73 S & F aluminium anodised hasp and staple, 125mm safety type with mild steel hinge pin including bolt type all as specified and directed. 74 M&L for new/old plastered surfaces and applying water proof cement base putty of average thickness 1mm andmake the surface free from dust and applying two coats of exterior oil emulsion paint (weather coat) over one coat of exteriorwall care primer complete all as specified and directed. 75 S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore ofpipe 15mm. including taking up or down old steel tubingand connection cleaning for refixing andmaking hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4. complete all as specified and directed. 76 S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore ofpipe 20 mm. including taking up or down old steel tubing connection cleaning for refixing andmaking hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4, complete all as specified and directed. 77 S&F for PVC (SWR) floor trap 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repairs all as specified and as directed. 78 S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps incl dismantaling of old unserviceable cast iron / RCC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and directed 79 S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps incl dismantaling of old unserviceable cast iron / RCC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and directed. 80 S & F PVC (SWR)junction single(single T)equal or unequal with access door bore of pipe 75 mm complete all as specified and directed. 81 S & F PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and directed. 82 S & F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 83 S & F Stainless steel Plate rack of size 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as specified and directed. 84 Supply and fixing Kitchen sink tap chromium plated for 15mm bore of pipe of cat part No (QQP-7347PM) of jaquar or equivalent complete all as specified and directed. 85 S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and directed. 86 S & F waste coupling of PTMT (half or full threaded) 32 mm dia complete all as specified and directed. 87 M & L for PVC waste pipe 32 mm dia flexible with cup & pressure rating 6 kgf/cm2to fit wash hand basin waste coupling complete all as specified and directed. 88 Taking down carefully copper/aluminum pointwiring(light, fan,Power) completefittings such as switches , ceiling roses pendents , regulatorssockets light fittings etc and making good disturbed surface of wall, floors, roofetc complete all as specified and directed. 89 M&L for point wiring complete with 1.5 Sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade, multi stranded with copper conductor drawn through and incl PVC CasingCappingwith accessories in wall/roof/ceiling etc incl steel modular terminal boxes, concealed surface to wallscovered with modular plates with cover blanking plate etc and 1.5 Sqmm PVC insulated, unsheathed copper conductor multistrandedcable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified and directed.Make of Casing Capping : Polycab/ Modi/ Presto PlastMake of Wire : Plaza/ Polycab/ HavellsNote: (a) Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely).(b) Blanking plate,Modular cover plate and Modular box shall be deemed to include in quoted rates. 90 Description all as per item 89above but with 4 sqmm copper conductor for 15 amp switch socket outlet combinationincluding 4 sqmm copper earth wire complete all as specified and directed. 91 S & F Ceiling rose 3 pin flush type 6 Amps, 250 volts ACISI marked, complete all as specified and directed. 92 Supply and Fixmodular switch1 way 16 Amp.1 module, complete all as specified and directed. Make :Legrand/ Crabtree/ Anchor/ Indoasian 93 Supply and Fix modular Socket, 16A - 2/3 pin combined 2 module, complete all as specified and directed. Make : Legrand/ Crabtree/ Anchor/ Indoasian 94 S&F electronicfan regulator modular type 230 volts, step type socket type, hum free 100 watt, complete all as specified and directed.Make :Havells / Anchor/ Crabtree/ Indoasian. 95 Supply and Fixing 4 feet surface mounted batten type luminaire , lumen output of 2000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white aluminium extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. Make : Philips/ Bajaj/ CG/Havells.. 96 Supply and Install kitchen electrically operated Chimney silent suction type having output not less than 1000 meter cube per hour having variable speed control complete with all accessories and suitable length of exhaust duct to be connected to suitable hole reqd as persiterequirement and connected accessories provided by contractor without any extra cost all as specified andas directed (Make Faber model no - STI LUC 3D Max 90BK or equivalent)Note:- (i) Also Cost includes for provision of 40x40x5mm MS angle frame suitably painted with one coat of primer and two coats of synthetic enamel paint duly fixed on walls/ceilings to support the chimneys. 97 Supply and fixsheet metal enclosure distribution board SPN, 4 way 240 volts, without bus bar, with IP 42 protection and Double Door, suitable for mounting MCBs, complete all as as specified and as directed. 98 S&F MCB single pole and neutral 240 volts 40 Amps, 10 KA rupturing capacity.C series all as specified and as directed. 99 M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 Sqmm drawn through in and incl suitable size surface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 6 Sqmm surface PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and directed.Note: (a)2 runs of 6 Sqmm cable along with one run of 6 Sqmm cable for earth conductor shall be measured as one lengthMake:- Havells/ Polycab/ Plaza. 100 Supply and Fixing 2 feet surface mounted batten type luminaire, lumen output of 1000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white aluminium extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ, complete all as specified and directed. Make : Philips/ Bajaj/ CG/Havells.. 101 Supply and fixing building security/ LED street light fitting 36 Watt, 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, including bracket with impact and corrosion resistant including thermal, management in multiple optics complete, with IP 65/66 protection complete all as specified and directed.Make: Philips/Bajaj/CG/Crompton 102 Taking down existing fan, (ceiling fan,wall mounting fan,exhaust fan) sealing cable end, dismantling blades and removing fan and blades anddeposit to E/Mstore all as specified and directed. 103 Supply and fixing Ceiling fan 1200mm sweep, energy efficient ISI mark withstar rating 230 Volts AC 50 Hz, single phase including provision of fixing arrangement, nut and bolt andflexible cable 3 core of size 1.5 sqmm not less than 0.5 m long complete, writing MES No. with synthetic enamel paint all as specified and as directed. Make : Havells/Bajaj/ Orient. 104 Supply and fixingExhaust Fan 300 mm sweep, 230/240 volt AC single phase, heavy duty,1400 RPM, corrosion less mild steel body of motor, fixing arrangement with MS pipe 350 mm dia of required length for protect reshape of stone masonry, suitable hold fast with necessary nut, bolts / screws writing MES No. with synthetic enamel paint all specified and directed. Make : Havells/Bajaj/ Orient. 105 Supply and fix Air circulator fans metal body 230 Voltssingle phase oscillating 450mm sweep suitable for wall mounting all as specified and directed. Make : Havells/Bajaj/ Orient. 106 M & L for drain out the water and taking down thewater heater any capacity and depositto E/M store yard all as specified and directed. 107 Supply and installwater heater storage type (Geyser) vertical of capacity 25 Ltr, suitable for high pressure up to 8 barpowder coated metal body, temperature indicating dial , glass line coated tank, magnesium anode,efficient long life copper heating element, wattage 2 KW electrically operated, AC 230 Volt, BEE5 Star Rated with complete fittings/partsand accessories for fixing on wall/surfaceall as per site required andspecified anddirected .Make:- Bajaj / Racold / Havells 108 Supply and installwater heater storage type (Geyser) vertical of capacity 50 Ltr, suitable for high pressure up to 8 barpowder coated metal body, temperature indicating dial , glass line coated tank, magnesium anode,efficient long life copper heating element, wattage 2 KW electrically operated, AC 230 Volt, BEE5 Star Rated with complete fittings/partsand accessories for fixing on wall/surfaceall as per site required andspecified anddirected .Make:- Bajaj / Racold / Havells 109 M&L for point wiring complete with 1.5 Sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade, multi stranded with copper conductor drawn through and incl PVC CasingCappingwith accessories in wall/roof/ceiling etc incl steel modular terminal boxes, concealed surface to wallscovered with modular plates with cover blanking plate etc and 1.5 Sqmm PVC insulated, unsheathed copper conductor multistrandedcable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified and directed for following points :-Make of Casing Capping : Polycab/ Modi/ Presto PlastMake of Wire : Plaza/ Polycab/ HavellsNote: (a) Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely).(b) blanking plate, Modular cover plate and Modular box shall be deemed to include in quoted rates). 110 (a)One fan/Exhaust fanpoint controlled by one switch. 111 (b)One 5A 2pin/ 3pin switch socket out let multipurpose on independent Board. 112 Supply and Fixmodular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/ Indoasian 113 Supply and Fixmodular switch1 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/ Indoasian 114 M&L for Sub main wiring with PVC insulated unsheathedFRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable sizesurface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 4 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and directed.Note: (a)2 runs of 4 Sqmm cable along with onerun of 4 Sqmm cable for earth conductor shall be measured as one length.Make:- Havells/ Polycab/ Plaza. 115 Supply and fix single pole and neutral sheet encloser with a two pin and earth plug socket complete including one double pole MCB of 20Amp, C curve 10 Ka rupturing capacity complete all as specified and directed. 116 S&F MCB single pole240 volts 5 to 30 Amps, 10 KA rupturing capacity.C series all as specified and as directed. 117 Supply, installation, testing & commissioning of maintenance free chemicalearthing system comprising of 17mm dia copper bondedrod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducingliquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installationcomplete all as specified and directed.Make : Model HTSP 317 of safeTrode or equivalent in OBO Betterman/ FURSE/ERICO. 118 The quoted rate shall also deemed to be included the following :- (i)Prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of Engr-in- Charge/JE (E/M),user and the report has tosubmitto Garrison Engineer with recommendation of manufacturer, if required additional interconnection ofearthing to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testingandsubmission of report with recommendationdeemed to be included in the quoted rate. 119 (ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors. 120 (iii) Rateofearth energizer compound of 25 Kg of 02 bags and earthresistance reducingliquid 10 litre per cane for each pit deemed to be included in the quoted rate. 121 (iv)Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor before commencement of work. 122 (v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH value should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete. 123 (vi) Copper strip of size 20 x 3 mm (99.99% molecularly copper) shouldbe fixed on proper post insulator at the instrument end ( copper strip upto 7.5 RM will be considered in unit quoted rate and extra will be measured and paid separately). 124 (vii)Testing of earth shall be carriedout in presence ofdepartmental and user representativeand report shall be submitted to Garrison Engineer duly signed by all concerned. 125 (viii)Earth resistance tester will be provided by the contractor.Tester should be calibrated from authorised company/ lab. 126 (ix)Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintened duly signed by all concerned.After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained. 127 (x) The contractor shall give a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion. 128 (xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock. 129 (xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is maintained. 130 (xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing per each earthing shall be retained from payment due to the contractor from final bill for the guarantee period. 131 (xiv) The electrode shallcarry manufacturers name . 132 (xv) The connection clamp shall be permanentlly welded to the copper boundedrodto avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination. 133 (xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm. 134 (xvii)Earth work such as auguring andmaking good the surrounding area shall carried out in any type of soil. 135 (xviii)The contractor shall submit CPRI India certified document for copper bonded rod to ensure genuity of material. 136 (xix) Sign boardof mild steel 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxideZinc chrome primer showing result of earthing should be fixed near the earth pit after completion as directed by engr-in-charge. 137 Material and labour for Earth pit cover madeof heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 7.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mmfor each electrode pit complete all as specified and directed. Make : Model SEPC 250 of SAFE TRODE/ Electrogrip Model/ EGTEK3LC of ISG Global or equivalent. Note :- The contractor shall submit load bearing capacity certificate from the manufacturer. 138 S&F Copper strip of size 20 x 3mm thick (99.99% molecularly copper) as earthing lead fixed to wall/roofs etc complete all as specified and directed. Note : All Joints should be joined by Exothermic Welding or Brazing. 139 Note :- An amount of Rs 15,701.60 on account of credit schedule for schedule A part II shall be deducted from the total amount of BOQ to arrive at the contract sum.
Contract Date: Apr 01, 2025 Contract Value : ₹ 49.63 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 9
Karnataka View Result →
28.
Defence #7183262 AOC
REPAIRS/ REPLACEMENT AND DAY TO DAY MAINTENANCE OF GI/DI/PPR PIPE LINE DISTRIBUTION SYSTEM, BOREWELLSTESTING OF WATER AND CLEANING OF OHT & UG SUMP AND TESTING OF WATER AT CDM OTM AREAS, DHRUVA AT CDM AREA UNDER AGE E/M NO IAND MISCLENIOUS REPAIRS TO ELECTRIC SUPPLY SYSTEM, CAPACITOR PANEL, HIGH MAST, AMF PANEL AND ALLIED WORKS AT VARIOUS LOCATION OF AGE EM II OF GE (UTILITY) SEC’BAD- 1 M&L attending repair/rectification ofexternal water supply complaints of GI/CI/DI Pipe lines, sluice valves, gate valves of any type and size, no water supply and other water related complaints including transportation from complaint cell to complaint locations and back to complaint cell along with necessory T&P as required at site underCDM areas and the following type of complaints all as specified and directed. (Note :-Contractor should visit the site to understand site condition/distance between the complaint cell to the AOR before coating the rates. No claim in this regard will be entertained during execution stage). 2 Repairs and checking any type of leakages in GI/CI/DI/PP-R Pipe lines, sluice valves, gate valves of any type and size, no water supply and other water related complaints as directed. 3 All as per item No 1 here-in-before but for GI/PP-R pipe line of size20 mm dia to 40 mm bore. 4 All as per item No 1 here-in-beforebut for GI/CI/ PP-R pipe line of size 50 mm dia to 80 mm bore. 5 All as per item No 1 here-in-beforebut for GI/CI/PP-Rpipe line of size 90 mm dia to 150 mm bore. 6 All as per item No 1 here-in-before but for GI/CI/DI pipe line of size 200 mm dia to 300 mm bore. 7 M&L for attending break down of water supply pipe line at Military area / Military Roads /civil Roads /PWD Roads /Cantt board roadsand repair s to CI/DI/PPR/MSwater mains of size 80 mm to 400 mm bore at a given notice including necessary excavation in mud, in any type of soil , PCC,RCC, hard rock etcby manual or using special T&P such as JCB etc.De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials such as collars, bends/tail peaces etc and making joints complete all as specified and as directed including making good of disturbed surfaces..Notes for Sl item No 1.01 to 1.06:-(a)The contractor will be alloted complaints at MES complaint cell on daily basis on all working days including Sundays and holidays and sufficient tradesman / resources will be deployed by him/her for completion of day to day comaplaints within 12 hours from the time of reporting. Any delay beyond above mentioned time limit without intimation of genuine cause, penalties will be recovered twice of the quoted rate for each un-attended complaint. (b)A detailed log book of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and the same will be updated on daily basis in consulatation with JE E&M/Engr-in-Charge. (c)The contractor will make suitable arrangment for emergency complaints and will notify authorised representive /Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint.In case of any dispute the decision of accepting officer will be final and binding in this regard. 8 (d)The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints.(e)The quoted rate is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station at Secunderabad.(f)The contractor will maintain location wise record of each spare/fittings utilized as per inventry format given by AGE E/M, Secunderabd and the same shall be submitted to E/M No Istore yard on daily basis.(g)The stationery required for the job work such as complaint slip books, gate pass book, job card and T&P shall be arranged and maintained by the contractor.(h) The cost of excavation / earth work and repairs to damaged roads, LT UG/HT cables, existing structure etc shall be deemed to be included in the quoted unit rate and no extra payment shall be allowed on this account.(j) Spares/GI fittings required to be replaced and shall be measured and paid separately under respective items. 9 Supply and Fixing of GI fittings 15mm bore, medium grade, ISI marked, smooth finished and make embosed on fittings complete all as specified and directed for the following fittings:- 10 Union 11 All equal Tee 12 Socket 13 Hex Nipple 14 Nipple 75mm Long 15 Nipple 100mm Long 16 Nipple 150mm Long 17 Elbow 18 All as per item No2 above but for 20mm bore. 19 Union 20 All equal Tee 21 Socket 22 Hex Nipple 23 Nipple 75mm Long 24 Nipple 100mm Long 25 Nipple 150mm Long 26 Nipple 200mm Long 27 Reducer 20mm x 15mm. 28 Elbow 29 All as per item No 2 here-in-before but for 25 mm bore. 30 Union 31 All equal Tee 32 Socket 33 Hex Nipple 34 Nipple 75mm Long 35 Nipple 100mm Long 36 Nipple 150mm Long 37 Nipple 200mm Long 38 Reducer 25mm x 15mm. 39 Reducer 25mm x 20mm. 40 Elbow 41 All as per item No2 here-in-before but for 40 mm bore. 42 Union 43 All equal Tee 44 Socket 45 Hex Nipple 46 Nipple 75mm Long 47 Nipple 100mm Long 48 Nipple 150mm Long 49 Nipple 200mm Long 50 Reducer 40mm x 25mm. 51 Reducer 40mm x 20mm. 52 Elbow 53 All as per item No2 here-in-before but for 50 mm bore. 54 Union 55 All equal Tee 56 Socket 57 Hex Nipple 58 Nipple 75mm Long 59 Nipple 100mm Long 60 Nipple 150mm Long 61 Nipple 200mm Long 62 Reducer 50mm x 20mm. 63 Reducer 50mm x 25mm. 64 Elbow 65 Taking up defective cast iron /GI water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead from ground, cleaning the pipes free from sedimentation/scaling etc for reusing the serviceable pipes complete all as specified and directed for the following sizes:- 66 100mm bore. 67 150mm bore. 68 200mm bore. 69 Re-laying only cast iron /GI pipes obtained from in item No.7.00 above including laying level or to falls, in trenches, on the ground or on supports complete all as specified and directed for the following sizes:- 70 100mm bore. 71 150mm bore. 72 200mm bore. 73 Taking up or down GI/PVC/PP-R water tubing and connections including cleaning the pipes free from scaling for reusing the same in repairs / alteration or removable to store etc to water pipes and connections complete all as specified and directed for the following sizes:- 74 20 mm bore. 75 25 mm bore. 76 40 mm bore. 77 50 mm bore. 78 80 mm bore 79 Re-laying /refixing or reroutingof GI/PVC/PP-R old water tubing and connection in new or old position including fittings with old/new bends, elbows, socket nipples, tapers, and reducers etc as per site requirement (floors, walls and ceilings) complete all as specified and directed. 80 20 mm bore. 81 25 mm bore. 82 40 mm bore. 83 50 mm bore. 84 80 mm bore. 85 Supply, lay and fixing steel water tubes,medium grade, galvanised with all fitting laid in trenches/walls as in repairs complete all as specified and directed forfollowing bore of pipes :- 86 20 mm bore. 87 25 mm bore. 88 40 mm bore. 89 50 mm bore. 90 80 mm bore. Note :- Excavation and Earth work shall be measured saperately. 91 Supply and fix gun metal gate valve, ISI marked connected with iron wheel head, screwedat both ends for iron pipes and fixed including taking down of unserviceable gate valve complete all as specified and directed for the following sizes:- 92 20 mm bore. 93 25 mm bore. 94 40 mm bore. 95 50 mm bore. 96 M&L cutting of road / hard standing up to not exc 60 cm in width and60 cm depthfor laying of water pipe line complete all as specified and as directed. 97 Supply and fix 40mm dia Non Return Valve, ISI marked connected withscrewedat both ends for iron pipes and fixed including taking down of unserviceable NRVcomplete all as specified and directed :- 98 Supply and fix 50mm dia Non Return Valve, ISI marked connected withscrewedat both ends for iron pipes and fixed including taking down of unserviceable NRVcomplete all as specified and directed :- 99 Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for laying of pipe lines, valve chambers, man holes for foundation of PCC/steel poles, laying cable tenches etc including forming bottom surface to required level and gradient and getting out in hard /dense soil complete all as specified and directed. 100 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and directed. 101 Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. 102 S&F in replacementof DI D/F Gate valve (Soft Sealed) Resilient Seated Soft Sealing gate valves( Sluice valvesRAISING TYPE) with body bonnet of ductile cast ironof grade GGG-40/SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per IS 3896 - Part 2- 1985 and subsequent revisions, Wedge fully rubber lined with EPDM Food grade qualityand Seals of NBR and the valve should be vacuum tight and 100 % leak proof with face to face dimension as per BS 5163-89/IS 14846-2000/DIN 3202 F 4. andValves should be electrostatic powder coating both inside and outside pocket less body passage class PN 1.6 including all jointing materials (Gasket, Nut bolts etc)connecting and testing complete all as specified and directed. 103 80 mm bore. 104 100 mm bore. 105 150 mm bore. 106 200 mm bore. 107 M & L for dismantling of defective sluice valve for repairssuch as repacking stuffing box of sluice valve spindle, refacing, grinding, stuffing and threading of spindle, replacement of worn out check nut, repairs to gate assembly replacement of jointing materials such as rubber sheets, nuts, bolts & washers, gland rope in new one and refixing in its original position, testing on completion etc complete all as specified and directed of following sizes:- 108 80 mm bore. 109 100 mm bore. 110 150mm bore. 111 200mm bore. 112 250mm bore. 113 Burning out lead joints of the existing CI mains in position, including removing old lead carefully without demaging the pipe etc complete all as specified and as directed for the following sizes:- 114 80 mm bore. 115 100 mm bore. 116 150 mm bore. 117 200 mm bore.Note:- Exavation and earth work shall be measured and paid seperatelyunder the relevent Sch A item. 118 M&L for lead joint for CI/DI pipe includingspun yarn etc for spigot & socket pipes and fitiings complete all as specified and as directed for the following sizes:- 119 80 mm bore. 120 100 mm bore. 121 150 mm bore. 122 200 mm bore. 123 M&L Rubber Gasket joints (Tyton joints) including rubber ring suitable for spigot and socket CI/DI pipe and fittings complete all as specified and as directed for the following sizes:- 124 200mm bore. 125 150mm bore. 126 100mm bore.Note:- Excavation and earth work shall be measured and paid separately. 127 M&L for CI fittings for spigot and socket pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, angle branch, cross (all sockets or socket & spigot collars, caps and plugs for joining up to 150 mm bore CI pipe as in repairs complete all as specified and directed. 128 M&L for Construction of brick masonry valve chamber of size 1000 x 1000 x 1000 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick, 150 mm wide off sets allround over 100 mm thick hard core, brick masonry walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally and 150mm below GL externally and top of floor including excavation, earth work in hard/dense soil, 5 mm thick MS sheet cover fixed on 50 mm x 50 mm x 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of red oxide primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed. 129 S&F Ductile iron pressure pipes 200 mm bore class K7, centrifugally cast with spigot and socket ends conforming to IS 8329/2000 with cement mortar lining inside the pipes and outside zinc coating suitable for push-on-joint (rubber gasket D jointing) inany length including DI specials as required at site confirming to IS 8329/2000 and all jointing materials and making good for disturbed surfaces of roads, path ways etc while laying the pipe line at site, site clearance for the route of pipe line, welding, cutting the existing CI/DI/MS pipe line of any size up to 150 mm bore for inserting branch connections etc complete including taking down old unserviceable CI pipes all as specified and directed. 130 All as per item No. 26 above but ductile iron pressure pipes 150 mm bore class K7, 131 All as per item No. 26 above but ductile iron pressure pipes 100 mm bore class K7, Notes for item No. 26 to28:- (a) DI pipe shall be laid in trenches at a depth of 0.7 to 1.0 m below the existing GL(b)Lead Joints / D-Joints will be measured and paid separately. (c) The contractor is responsible for obtaining the approval from Police Department for Traffic Diversion and related works if required in consultation with the MES deparatment.(d) Contractor is responsible for repair/replacement of any damages to the existing structures, Under Ground HT/LT/OFC Cables etc during the course of execution. 132 M&L ductile iron specials and fittings class K9 such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces, single branch. Y junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs suitable for DI pipes offlanged/socket ends of sizes 100mm bore to 300 mm bore as in repairs complete all as specified and directed . 133 Disconnecting the suction and delivery pipe line and electric connections of submersible pump set of 7.5 HP / 5 HP and removing it from its original position alongwith pipes and fittings carefully including chain pulley with tripod and transporting the same to the work shop (situated within the twin cities) for repair and refixing the same in its original position after repairs including connecting up of water and electric connections including testing andcommissioning complete all as specified.Note:- Expendable stores like cotton waste / cleaning materials, lubricants, gland packing, metal filling, machining and transportationfrom site to work shop and back are deemed to be included in rate quoted. ii) Labour element is included in unit rate quoted. 134 M&L for Lowering of submersible pump set of any capacity including all pipes and fittings complete with chain pulley and tripod after cleaning/repairing bymeans into openbore well and connecting electrical and water connections including testing on full load complete all as specified and directed. 135 M&L for rewinding ofthesubmersible motor with PVC insulated conductor with super enamelled copper conductor with ‘F’ class heavy grade insulation weight and turns to achieve its full efficiency inclduing tying the winding and connecting the coils and brining the connections as that of exisitng one including applying insulating varnish, heating and backing the windings thoroughly for submersible motor of above 5 HP and up to 7.5 HP capacity including taking down old unserviceable existing copper winding complete all as specified and directed. 136 All as per item No 32 above butfor thesubmersible motor above 3 HP and up to 5 HP capacity. 137 M&L disconnecting and removing the water and electric connections carefully from the existing submersible pump sets of capacity up to 7.5 HP for inspection, repairs and reassembling the pump and motor as per the original assembly after repairs / replacing the worn out unserviceable parts with new parts as ordered, including cleaning replacing the minor items like packing bolts, nuts, washers and MS clamps etc and applying one coat of approved hammertene spray paint on exposed steel surfaces, making the pump and motor fully serviceable including matching etc and testing the both after refixing and commissioning the pump set for satisfactory operatrion on its full loadcomplete all as specified and directed.Notes:- (a) The spares required for repair the pump sets will be measured and paid seperetely under respective item.(b) Expendable stores like cotton waste/cleaning materials, lubricants, gland packing, metal filling and transportation from site to work shop and back shall be deemed to be included in rate quoted.(c) Labour elements shall deemed to be included in unit rate. 138 Supply only the following spares for repairs of submersible pump set of 7.5 HP capacity complete all as specified and directed. 139 Motor bearing bush (LB) 140 Thurst bearing set 141 PVC Impeller 142 S.S Sleeves 143 Stage casing 144 Stage casing sleeves 145 Suction bush 146 Pump shaft 147 Pump coupling 148 Sand guard 149 Oil seal 150 Support plate MS with GInut bolt and washer 151 M&L disconnecting and removing the water and electric connections carefully from the existing submersible pump sets of capacity up to 5 HP for inspection, repairs and reassembling the pump and motor as per the original assembly after repairs / replacing the worn out unserviceable parts with new parts as ordered, including cleaning replacing the minor items like packing bolts, nuts, washers and MS clamps etc and applying one coat of approved hammertene spray paint on exposed steel surfaces, making the pump and motor fully serviceable including matching etc and testing the both after refixing and commissioning the pump set for satisfactory operatrion on its full loadcomplete all as specified and directed.Notes:- (a) The spares required for repair the pump setswill be measured and paid seperetely under respective item.(b) Expendable stores like cotton waste/cleaning materials, lubricants, gland packing, metal filling and transportation from site to work shop and back shall be deemed to be included in rate quoted.(c) Labour elements shall deemed to be included in unit rate. 152 Supply only the following spares for repairs of submersible pump set of 5 HP capacity:- 153 Motor bearing bush (LB) 154 Thurst bearing set 155 PVC Impeller 156 S.S Sleeves 157 Stage casing 158 Stage casing sleeves 159 Suction bush 160 Pump shaft 161 Pump coupling 162 Sand guard 163 Oil seal 164 Support plate MS with GInut bolt and washer 165 S&FMJ collar double ended flanged ISI embossed pressure 1.6 including jointing such as rubber gasket, nuts and bolts, washers materials etc complete including replacement of unserviceable sluice valves of any typecomplete all as specified and directed for the following sizes:- 166 80 mm bore. 167 100 mm bore. 168 150 mm bore. 169 200 mm bore. 170 300 mm bore 171 Opening Mono block pump set 5 HP capacity for inspection, repairs and reassembling the pump and motor as per the original assembly after repairs / replacing the worn out unserviceable parts with new parts as ordered including cleaning, replacing the minor items like packing bolts, nuts washers and MS clamps etc and applying one coat of approved hammertene spray paint on exposed steel surfaces, making the pump and motor fully serviceable including machining etc and testing the both after refixing and commissioning for satisfactory operatrion on its full load complete all as specified and directed. 172 Supply only the following spares for repairs of Mono block pump set upto 5 HP capacity:- 173 Ball bearing drive end 174 Ball bearing for non driving end 175 GM bush 176 CI impeller 177 MS pump shaft 178 Gland cover 179 Opening Mono block pump set 7.5 HP capacity for inspection, repairs and reassembling the pump and motor as per the original assembly after repairs / replacing the worn out unserviceable parts with new parts as ordered including cleaning, replacing the minor items like packing bolts, nuts washers and MS clamps etc and applying one coat of approved hammertene spray paint on exposed steel surfaces, making the pump and motor fully serviceable including machining etc and testing the both after refixing and commissioning for satisfactory operatrion on its full load complete all as specified and directed. 180 Supply only the following spares for repairs of Mono block pump set of 7.5/10 HP capacity:- 181 Ball bearing drive end 182 Ball bearing for non driving end 183 GM bush 184 CI impeller 185 MS pump shaft 186 Gland cover 187 S&F DOL starter 3 phase 415 Volts, 7.5 HP capacity rating 14 Amps, relay range 9 to 14 Amps, MK-1, including connecting up of incoming and outgoing connections and testing commissioning, including removingthe existing unserviceable one complete all as specified and directed. 188 S&F single phase preventor, SPPR type 360/380/415 volts suitable upto 7.5 HP pump including connecting up of wire / cable testing complete including removing the existing unserviceable one all as specified and directed.L&T Cat Part No CS81809OOOO orequivalent make in IndioAsian/Leagrand/ HPL. 189 S&F in repairs CI foot valve leather sheet type / flange type suitable for 80 mm dia GI suction heavy duty includung replacement of nuts, bolts washers, gaskets and flanges etc. complete all as directed and specified by Engr-in-charge. 190 Supply and lay submersible copper conductor cable 1100 volts grade PVC insulated, flexible, PVC sheathed with multistranded copper conductor of size 3 core 4 Sq mm cutting to required length connecting with necessary end ferrules / water proof joints including removing the existing unserviceable cable complete all as specified and directed 191 Supply and lay submersible copper conductor cable 1100 volts grade PVC insulated, flexible, PVC sheathed with multistranded copper conductor of size 3 core 6 Sq mm cutting to required length connecting with necessary end ferrules / water proof joints including removing the existing unserviceable cable complete all as specified and directed 192 Flushing/de-silting of accumulated soilfrom inside the borewell up to 250 mm dia and depth up to 150 meter by using air compressor/ special equipmentsof existing borewellsincluding surgingand flushing the bore at a pressure of 7 Kg / Sq cm complete with compressed air andflushing the sand, mud etc from the bore well till discharge of the fresh water, including testing of watersamples for chemical and bacteriological tests and yield testing for 4 hours complete all as specified and directed . Note: The rate shall be inclusive of hiring of Air compressor /special equipment, diesel, tools and Accessories including transportation and skilled man power to execute the work. 193 Supply & ReplacePVC pipe 6 kg/cm2of size 250 mm dia heavy duty screwed and socketed type to borewell confirming to IS complete all as specified and directed.Make : Sudhakar 194 M & L for GI pipe heavy grade 50mm dia, cut into 3.0 mtr length including providing of threading on both sides and lowering into the existing bore well along with existing GI pipe for increasing the length of the borewell pipe as in repairs complete all as specified and directed. 195 Supply & fixing HDPE heavy duty column pipe internal dia 50mm PN 16kq/Sqmm including necessary all fixings 196 M&L for removing submersible pump motor set of capacity up to 7.5 HP stuck inside the borewell of depth up to 100 meterbyflushingthe existing borewells of any size with drilling compressor mounted on truck at a pressure of 7 Kg / Sqcm with compressed air andflushing the sand, mud including flushing out tree roots etc from the bore well till removing of the stuck motor and then clear the bore by using Rod drilling using Bore well drilling machine from any kind of obstruction, reinstall the motor and coloumn pipe , necessary electric connection and testingcomplete all as specified and directed .Note : Rate quoted by the contractor is deemed to be inclusive of Flushing by using suitable compressor, rod drilling for clearing of bore well, Removingthe submersible pump set stuck inside the bore well and reinstall the same after repair including removing and refixing of coloumn pipe, electrical connections, testingetc as required. 197 Testing of borewell water from various location and submit the report to AGE E/M office. The vaious parameters studied are colour, taste, odour,Ph, turbidity,total dissolved solids, total suspended solids, total hardness , calcium hardness, magnesium hardness, copper ,iron,chlorides, sulphates, nitrates etc complete all as specified and directed 198 Reboreing/re-Drillingof existing borewell up to 250 mm dia, from the existing depth, at any type of strataby mud flash rotating equipment,from the Existingdepth to 100 Meters . Notes:- (i) Water injection charges if required (ii) Transport Charges , (iii) , Vehicle settlings & Flishing charges (iv)Expendable stores like cotton waste / cleaning materials, (v)Labour element. should beincluded in unit rate quoted. 199 100 Mtr to 200 Meters 200 M&L for cleaning of existing column pipes (3 Mtr length ) duly scraping, cleaning and painting complete through anti corrosive black bituminous paint all as per directed by engr-in-charge 201 Supply and replace heavy duty long socket suitable for 50 mm dia heavy duty GI pipe complete all as specified and directed 202 Design, fabrication, supply and errecting connecting and testing totally enclosed LT Cubical DOL starter panel board of size not less than 75cmx60xcmx30cm, 3 Phase 4 wire system indoor type 2mm ,double door front and back openeing type sloped canopy(Hood) on top extended , cable alley, provision of knock out type plates for various sizes of cable up to 25 Sqmm 4 Core in and out, CPRI approved factory made fabricated out of 2 mm thik CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structral RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls ,Panel mounted on suitable size of angle iron frame thick duly painted & it shall be fixed from 45cm of ground level and embeded in PCC 1:3:6 type C1, 20cm below ground level and 15cm above ground level including taking down old unserviceable and consisting the following provisions:- 203 (a)MCB 6-40Amps, Triple Pole AC 415 Volts, 50Hz,10/16kA -01 No (selection of MCB rating with respect to pump set capacity).(b)3-ph,415volts, 50Hz,DOL starter suitable for pump set capacity above 7.5Hp to 10 Hp(as required) with suitablerelay , contactor, WithDryRun,Locked Rotor and Short Circuit protection Mobile ,Voltage and current based protection for all faults with individual protection enable/Disable features,inbuilt hour based and real time clock based timersAvailable in hindi,Gujarati,Marathi,Tamil,Telugu,Kannada,Inbuilt hour based and Real Time Clock based timers with time compensation feature With LineVoltage,PhaseCurrent,PowerFactor,Power,Malayalam,Bengali,Oriya,Punjabi and English languages with Energy metering and total run time information -01Nos(c)Single phase preventor (to-from prevent phase loss & phase failure)-01Nos(d)Indicator lamp set of 3 - 01 Set(e)Rotatory type selector Switch(f) Digital Type multi dislay volt Meter 0-500 Volts with selector switch (g)Digital type multi display meter 3 Ph Ampere meter 0-100 Amps with selector switch Make : MCB: L&T/Havells/Siemens, DOL starter: L&T/BCH, Single phase preventor: Minilec/GIC 204 Supply and fix Aviation obstruction light LED type SIMILER TO XGP400 IXLED-K2/RD 240 VOLT, incl fixing the lights with clamps, nuts,bolts etc complete all as specified and directed Note: Rate inclusive of fixing the light on the 22 mtr overhead tank. 205 Supply & lay heavy duty PVC insulated multi stranded copper conductor 3 core of size 2.5 Sqmm with 20 mm upvc conduit pipe 230 volts, 50 HZincl clamping of conduict on overhead tank of 22 mtr complete all as specified and directed. 206 Supply and fix 01 Mtr length, 15mmcopper Air termination rods lightning arrester is made out from Gun metal with 4 Spikes Incl nuts , bolts , pcc as required on site and taking down old unsv onecomplete all as specified and directed Rate inclusive of fixing the rod on the 22 mtr overhead tank. 207 Supply and fix galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment incl insulators clamps etc complete all as specified and as directed.Rate inclusive of fixing the strip on the 22 mtr overhead tank. 208 M & L for maintenence free safe earthing electrode (SEE) designed pipe in pipe technology, set of 3 Nos earth pit duly inter connected with copper earth strip 25 mm x 3 mm, each earth pit having outer pipe of size76.3mm diaand inner pipe of size42.4 mm dia, each GI pipe have 2 mtrlongduly zinc and alloy coated having zinc coating (80-100) microns to whole length of pipe and alloy coating 250-300 micronto upper 300mm length of pipe, inside filled with crystal conductive compound (CCC) having anti corrosive and conductive properties to provide annular space of earth electrode and externalblack fill compound two bag of25 kg mixed with soil all arround the earth pipeforretainingmoisture, reduce the soil resistivity and dissipation of fault current, connected to earthing test point including excavation, earth work, PCC pit, RCC cover 50 mm thick, lifting rod 8mm dia, GI protection pipe 40 mm dia lightgrade for protection of inter connecting earthing strip from mechanical protection andtesting on completion, complete all as specified and directed. 209 M & L for maintenence free safe earthing electrode (SEE) designed pipe in pipe technology, Only 1 No earth pit duly connected with copper earth strip 25 mm x 3 mm, earth pit having outer pipe of size76.3mm diaand inner pipe of size42.4 mm dia, each GI pipe have 2mtrlongduly zinc and alloy coated having zinc coating (80-100) microns to whole length of pipe and alloy coating 250-300 micronto upper 300mm length of pipe, inside filled with crystal conductive compound (CCC) having anti corrosive and conductive properties to provide annular space of earth electrode and externalblack fill compound two bag of25 kg mixed with soil all arround the earth pipeforretainingmoisture, reduce the soil resistivity and dissipation of fault current, connected to earthing test point including excavation, earth work, PCC pit, RCC cover 50 mm thick, lifting rod 8mm dia, andtesting on completion, complete all as specified and directed. 210 Supply, install ,testing and commissioning ofChlorine Dosing System :- High Pressure single head adjustable chlorine dosing system including following accessories : Prepartion tankcapacity 100 ltrs. FRP dosing tankconsisting of water inlet line, outlet with Y strainer. Drain, Overflow,Conical bottom for sludge deposition, Pot hole with cover, Level gauge. Agitatorsingle flange mounted motor with plastic shaft and impeller and Service tank net capacity 100 ltrs. of FRP dosing tank consisting of water inlet line, Injector Dosing pup inlet arrangement, Drain, Overflow level gauge, inspection port. Agitatorflange mounted motor with plastic shaft and impeller. Provision of mounting lid and including drilling in existing CI/DI pipe of any dia including making necessary water and electricconnection including taking down old existingchlorine dosing system complete all as specified and directed .Note: Rate quoted by the contractor inclusive of all arrangement required for functioning of dising system including making hole on exixting CI/DI/MS/GI pipe line,connecting pipes/valves , necessary wiring and 15 Amps socket pointetc as required. 211 Supply only calcium Hypochlorite having 60%-70% available chlorine content in granular form (calcium based granular disinfectant) for water treatment (Drinking water and swimming pool) packed in 45 Kgs/50 kgseach drum complete all as specified and as directed. 212 Supply and fix 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule all as specified and directed 213 Supply and fix 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule all as specified and directed 214 M&L for cleaning of under mentioned RCC over head reservoir, under ground sump/semi under ground sump of any size and any height of staging by using mechanical means and scientific cleaning by carry out the following 7 stages of cleaning process for disinfection of surfaces:-(a) Cleaning of all external surfaces with hot water and Odor removal.(b) The inner surface of the walls and ceilings of the tank shall be cleaned with the pressure jet pump after dewatering in the tank.(c) After through cleaning of the tank, removal of algal calcination and other dust particles with high pressure including hot water treatment @50 degree centigrade.(d) Vacum cleaning and sludge shall be removed by using pump and the sludge has to be disposed off at a places as directed.(e) After removing the sludge from tank, the floor and inner surfaces of the tank shall be cleaned by using an industrial vaccum cleaner and the tank shall be made fully dust free and disinfection with bio-degradable chemical/anti bacterial spray and surfaces to be proven non toxic.(f) After the treatment as mentioned at (e) above, the inner surfaces of walls and ceiling shall be traeated with UV Radiation/Ozonization with UV rays.(g) After complete treatment is carried out, all inlet, over flow, delivery, wash out pipes, ladder and doors shall be painted with two coats of synthetic enamel black paint after thorough cleaning the surface and also the surfaces of sluice valves shall be painted with P.O. Red paint and writingcapacityof tank, date of cleaning and due date of cleaning on waqlls as specified and as directed.(h) The wire mesh of ventilaters of the tank shall be replaced with new GI wire mesh. 215 Over head tank of 100000 Gallons capacity at Dhruva Enclave. 216 Over head tank of 150000 Gallons capacity at Dhruva Enclave. 217 Semi under ground sump of 11000 Gallons capacity at CDM/OTM. 218 M & L for Water level indiactor, ISI marked suibale for 1.5/1.0 Lakh Gallon Over head water tank made out of MS sheet not less than 3.15 mm thick duly framed with Angle iron 50mmx50mmx5mm, painted withtwo coat synthetic enamelled white paint over a coat of red oxide primer, embossing /paste of water scale with red colour radium tapeincluding sutable fixing arrengement, wire rope, float , scale etc as in repairs complete all as specified and directed. 219 ELECTRIC SUPPLYM&L for attending, repair and rectification of external LT electric supply complaints on up to 1100Volts grade, over head/underground system alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:- 220 Replacement of worn out jumpers, jointing and tightening with new ACSR conductor.Note:- Single phase/two wire or 3 phase/4 wire system will be considered as one job for payment purpose. 221 Disconnecting from over head conductor, cutting worn out portion of LTcables of any type and size, carry out repairs including taking out cables from under ground loop line and rejoining the same to restore electric supply.Note :- (i) LT Jointing Kits, Cable protection Pipe if required at site will be measured and paid separately.(ii) Quoted rate is deemed to be inclusive of cutting and removing the pole coping and inserting the cable alongwith protection pipes. 222 Taking down old unsv Street light / flood lightfittings in any position of any capacity forRepair by replacement of unsv spares ( SPD / Driver / Mcpcb etc ) and re-fixing the same in existing location.Note:- Spares for repair of street light fittings will be measured and paid under respective items.Notes for Item Nos 1.01 to 1.04 :-(a)The contractor will be allotted complaints at MES complaint cell on daily basis on all working days and sufficient resources will be deployed by him/her for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit without intimation of sufficient cause, penalties will be recovered twice of the quoted rate for each un-attended complaint. (b)A detailed log of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and the same will be updated on daily basis in consultation with Engr-in-Charge or JE E&M as detailed.(c)The contractor will make suitable arrangement for emergency complaints and will notify auth rep/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint.In case of any dispute the decision of accepting officer will be final and binding in this regard.(d)The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints.(e)The quoted rate is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station at Secunderabad.(f)The contractor will maintain location wise record of each spare utilized as per inventory format given by AGE E/M, Secunderabd and the same shall be submitted to E/M No II store on daily basis. 223 M&L for ACSR conductor, steel reinforced for LT over head lines on poles including streching tightining of poles insulator with binding wire of suitable size with insulator/streching of ACSR conductor including disconnecting/taking out old existing unsv ACSR conductors complete all as specified and directed. 224 Supply & Replace MCCB along with both side spreader link and nut bolts of appropriate size(Conforms to IEC:60947-II/IS:13947-II) in exisitng LT Panel box/Feeder Pillar boxes (KIOSK),in MCCB DBsof capacity 315-400 Amps, 4 Pole, 35 KA, 415 Volt including disconnecting/taking out existing old unsv/burned MCCB complete all as specified and directed. 225 All as per item No 73 here in before but of capacity 250 Amps, 4 pole, 25 KA 226 All as per item No 73 here in before but of capacity 200 Amps, 4 pole, 25 KA 227 All as per item No 73 here in before but of capacity 160 Amps, 4 pole, 16KA 228 All as per item No 73 here in before but of capacity 125 Amps, 4 pole, 16 KA 229 All as per item No 73 here in before but of capacity 100 Amps, 4 pole, 16 KA 230 S&F MCB, SPN 10-32 Amps, 415 Volts with breaking capacity 6KA, including disconnecting/taking out existing old unsv/burned Isolator complete all as specified and directed. 231 S&F MCB, TPN 10-32 Amps, 415 Volts with breaking capacity 6KA, including disconnecting/taking out existing old unsv/burned Isolator complete all as specified and directed. 232 S&F MCB, SP 10-32 Amps, 415 Volts with breaking capacity 6KA, including disconnecting/taking out existing old unsv/burned Isolator complete all as specified and directed. 233 Supply and fixing of automatic street light switch using infrared sensor based nature switch for automatic switching of street lights.Nature switch operation should bebased on natural light lux level. Required illuminance level for switching on is < 30 Lux and for switching off >10 lux. The sensor should also have part night operation facility of min 4 hrs to max 12 hrs.The sensor along with suitable power contactors incoming outgoing MCBS SP andand automanual (sensor bypass selection option should be enclosed in a pole /wall mountable enclosure made of rust proof electric shock proof termite proof and FR grade SMC Box conforming to IP54 single phase load of 8 KW with circuit wiringmin 10 sq mm copper wire 63 Ampscontactorans suitable MCBs atboth positions at incoming and out goings of breaking capacity 10 KA complete including necessary clamp (2 sets) / anchor bolt(4 nos)for fixing on pole / walllcomplete all as directed including taking down old one .Model no Swadeep-02 EC 8KW 1P or equivalent from Havells/Legrand . 234 Supply and fixing of automatic street light switch using infrared sensor based nature switch for automatic switching of street lights.Nature switch operation should bebased on natural light lux level. Required illuminance level for switching on is < 30 Lux and for switching off >10 lux. The sensor should also have part night operation facility of min 4 hrs to max 12 hrs.The sensor along with suitable power contactors incoming outgoing MCBS SP andand automanual (sensor bypass selection option should be enclosed in a pole /wall mountable enclosure made of rust proof electric shock proof termite proof and FR grade SMC Box conforming to IP54 three phase load of 12 KW with circuit wiringmin 10 sq mm, 3 nos contactor each of 40 - 50 amps, incoming outgoing MCB (3 nos) rating 40 amps of breaking capacity 10 KA complete including necessary clamp (2 sets) / anchor bolt(4 nos)for fixing on pole / walllcomplete all as directed including taking down old one Model no Swadeep-02 EC 12KW 3P or equivalent from Havells/Legrand . 235 Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size16 to 50 Sqmm, complete all as specified and directed. 236 All as per item No 79 above but suitable foraluminium conductor cable of sizefrom 70 sqmm, 3.5 Coreto 95 Sqmm, 3.5 Core 237 All as per item No 79above but suitable foraluminium conductor cable of sizefrom 120 sqmm, 3.5 Coreto 150 Sqmm, 3.5 Core 238 All as per item No 79 above but suitable foraluminium conductor cable of sizefrom 185 sqmm, 3.5 Coreto 240 Sqmm, 3.5 Core 239 Supply and lay in trenches/fixed to walls/poles etc connecting buy using lugs, testingand commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with stranded aluminium conductor 4 Core 10 Sqmm complete all, as specified and directed Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately. 240 All as per item No:80 above but 2 Core 10 Sqmm 241 All as per itemNo:80 above but 4.0 Core 25 Sqmm 242 All as per itemNo:80above but 3.5 Core 35 Sqmm 243 All as per item No:80 above but 3.5 Core 50 Sqmm 244 All as per itemNo:80 above but 3.5 Core 70 Sqmm 245 All as per itemNo:80 above but 3.5 Core 95 Sqmm 246 All as per itemNo:80 above but 3.5 Core 150 Sqmm 247 All as per itemNo:80 above but 3.5 Core 185 Sqmm 248 Taking out and Relaying of LT cable of size 10sq mm to 50 Sqmm 2/3.5 coreafter carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugsall as specified and directed by ingr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item) 249 Taking out and Relaying of LT cable of size 70 sq mm to 150 Sqmm 3.5 coreafter carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugsall as specified and directed by ingr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item) 250 Taking out and Relaying of LT cable of size 185 sq mm to 300Sqmm 3.5 coreafter carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugsall as specified and directed by ingr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item) 251 Supplying, erecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 mtrs long)including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellowpaint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2 (inch) wide including taking down old unserviceable PCC poles of any type complete all as specified and directed.Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule. 252 Restreching/Restringing, tightening and repair to overhead line ACSR conductor of any size on LT poles including necessary Aluminium binding wire connectors PVC sleeves for jumper, fixing of insulators and prunning of tree complete all as specified and directed. Notes: (i) The distance between pole to pole in one span (contains 2/4/6 runs) i.e one span will only be considered for payment purpose. (ii) No Extra conductor will be measured for binding to insulators / jumpering etc. 253 Excavation in trenches, exc 1.5 mdepth but n.exc 3 mtr for foundation of PCC/Steel pole, laying of cable in trenches etc and getting out in Hard / Densesoil complete all as specified and directed. 254 Spreading riddled earth ( after preparation of excavated earth) inCable duct forcushioning of cable laid in trenches complete all as directed by Engineer-in-ChargeNote:- Punned thickness 18 CM( 6.25 Cm below cale and 11.75 cm above cale)will be measured for payment purpose. The earth removed during excavation to be used as rddled earth after crushing and sieving. Quoted rate inclusive of all arrangement as mentioned. 255 Supply and Laying bricks, common burnt clay building bricks, sub class B of size 210 x 110 x 70 mm laid across in trenches for cable protection complete all as specified and directed. 256 Laying only old Brick in trenches for Under Ground Cable Protection (Serviceable Materials obtained from Item here-in-before), complete all as directed. 257 Supplying and laying reinforced precast concrete cable cover class LV , Type 1 flat with size 250mmx150 mm x 40mm all asspecified and directed by Engr-in-Charge. 258 M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate for filling & foundation of pole & mass complete all as directed 259 M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate for filling & foundation of pole & stay complete all as directed 260 M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate for coping of pole complete all as directed 261 Cutting the existing road/PCC surface straight by manual, depth and width not less than 1 mtr below ground level for passing of underground cable and filling back with excavated soil upto 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed. 262 M&L for road crossing/drain crossing by adopting trench less tunneling work through specified pipe jacking method by erecting the equipment to true to the allignment and gradient by haidrolic pipe jacking technique complete including tunneling, excavation in any type of soils including hard rock, HDPE / GIpipe medium dutyduty of size 100 mm diain any length including jointing materials to carry LT UG cables of size upto 240 Sqmm and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorites complete all as specified and as directed.nOTE ; PIPE WILL BE MEASURED AND PAID SEPARATELY UNDER RELIVENT ITEMS 263 M&L for replacement of broken earth pit made out of PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate, 20 mm thick and earth pit cover made out of RCC 1:2:4 type B1, cover reinforced with 8 mm dia MS deformed bars @ 100 mm centre to centre both ways with hook made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and including reconnecting of earth lead of any type with new nuts, bolts and washers etc as required at site complete all as specified and directed. 264 M&L for painting the existing LT steel poles of 9.0 Mtr long including cross arms, clamps, street light junction boxes etc with 1 coats of aluminium paintincluding throughly cleaning the existing surface, writing of pole numbers in yellow circle 15 cm with black paint on poles. Painting the poles up to 1.5 Mtr height with alternate bands 30 cm height (3 Nos black and 2 Nos Yellow) from ground level, complete all as specified and directed. 265 M&L for Painting the existing LT PCCpoles with 1 coats of synthetic enamole base paintincluding painting of cross arms, clamps, etc with one coat of aluminium paint and providing alternative band of 30 cm width (3 black and 2 yellow) from bottom of pole to 1.5 metres height , writing of pole numbers in yellow circle15 cm with black paint on poles complete all as specified and directed. 266 Advance Maintenance Free G.I. SAFE EARTHINGElectrodewith PIPEof not less than 50 mm outer dia) and two meterlength, The electrode should be ofgalvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compoundto provide maximum contact between the electrode and Back Fill Compound. The earting pitcover should be factorty built (sizeTOP- 10 Inch, Bottom -13 Inch, Height 10.25 Inch ) made of heavy duty Polypropylenecomplete all as specified and directedmakeASHLOK/INDELEC/JMV /TERCEL/TRUE POWER 267 Trimming/pruning and removing of tree branches or any other foreign objects from HT/LT over head conductor and clearing the OH Line of any type and size for one span of any length in 2 way /4 way/6 way conductor system. Notes: (i) Insulators of any type, connectors and ACSR conductor of any size required at site will be measured and paid separately under relevant item of this schedule. (ii) The contractor is responsible for provision of Necessary T & P and safety equipments to complete the job. 268 Cutting unaxious green growth and grass by manual labour or by machine at all 11 KV Electric Installation premisses/around 2/4 Pole structure/along the boundary fencing and removing rubbish from the site of work complete all as specified and directed. 269 S&F LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10 KVBuilt-in-Surge Protection Device,road way light fitting with high power LED as light source of capacity 90 watts with suitable drivers etc and connecting with 1.5 Sqmm copperconductor PVC insulated three core weather proof cable etc, fixing to wall/pole, complete all as specified and directed. Note :(i) LEDs used should be the make of Cree/Osram/Lumilieds/Nitchia.(ii) Contractor has to produce LM-79/LM-80 certificate alongwith purchase vouchers.(iii) Surge protection of the drive should be 10 KV 270 All as per item No 102 above but 100 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker. 271 All as per item No 102 above but 120 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker. 272 All as per item No 104 above but 150 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker. 273 All as per item No-102 above but 200 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker. 274 S&F LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrossion resistant complete with driver and lamp die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting, with high power LED as light source of capacity 120 watts with suitable drivers etc and connecting with 4.0 Sqmm aluminium conductor PVC insulated twin core weather proof cable etc, fixing to wall/pole complete all as specified and directed.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.Note :(i) LEDs used should be the make of Cree/asram/Lumilieds/widchia (ii) Contractor has to produce LM-79/LM-80 certificate alonwith purchase vouchers and Guarantee certificate from Manufacturer. (iii) Surge protection of the driver should be 10 KV 275 All as per item No 103 above but 120 watts. 276 All as per item No 103 above but 150 watts. 277 All as per item No 103 above but 200 watts. 278 Supply, fixing, connecting and testingpost top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity1X35/40 watts, fixed to Pole/Wall in any position including taking down old existing street light fitting of any type and capacity complete all as specified and directed. 279 Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS crtifiedsuitable for60 watts LEDstreet light fittings of any makecomplete all as specified and directed. 280 Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS crtifiedsuitable for70/72 watts LEDstreet light fittings of any makecomplete all as specified and directed. 281 Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS crtifiedsuitable for90 watts LEDstreet light fittings of any makecomplete all as specified and directed. 282 Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS crtifiedsuitable for100/110/120 watts LEDstreet light fittings of any makecomplete all as specified and directed. 283 Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS crtifiedsuitable for100 watts LED floodlight fittings of any makecomplete all as specified and directed. 284 Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS crtifiedsuitable for120 watts LED floodlight fittings of any makecomplete all as specified and directed. 285 Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS crtifiedsuitable for150 watts LED floodlight fittings of any makecomplete all as specified and directed. 286 Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS crtifiedsuitable for200 watts LED floodlight fittings of any makecomplete all as specified and directed. 287 Supply and fixingsteel light bracket made out of 40 mm bore mild steel GI light grade tubing over all length 1.5 mtr bend to shape as directed including providing two Nos MS flat iron 40x6 mm clamp of appropriate size with nut bolts and washer duly painted with two coat of synthetic enamel paint over a coat of primer (GI surface shall not be painted) complete all as specified. 288 S&F PVC insulated unsheathed/sheathed cable with stranded Aluminium conductor 1100 Volts grade, flat twin core service cable of size 4 Sqmm conforming to IS:694/1990 with latest amendments ISI including disconnecting/taking out existing unsv/damaged old service cable complete all as specified and directed. 289 All as per item No 114 above but of size 6 Sqmm complete all as specified and directed. 290 All as per item No 114 above but of size 10 Sqmm complete all as specified and directed. 291 S&F hot press moulded SMC junction/terminal box of size with internal diamensions of 300 x 200 x 1055 mm with hinged door, incl provision of 2 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixed on pole by means of clamps made out of MS flat iron of size 25mm x 3 mm 2 Setincluding dismantling of old unserviceable all as specified and as directed. 292 Supply and laying GI tubing light grade of size 40 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm. 293 Supply and laying GI tubing light grade of size 50 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm. 294 Supply and laying GI tubing light grade of size 80 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm. 295 Supply only of aluminium cable lugs of following sizes :- 296 16to 25 Sqmm Size 297 35to 50 Sqmm Size 298 70to 95 Sqmm Size 299 120to 150 Sqmm Size 300 185to 240 Sqmm Size. 301 S&FMCCBboxFACTORY FABRICATED Powder coated Suitable for fixing at WALLincluding two set of clampscomprisinf with the following i) MCCB100 Amps 16 KA FP WITH BOTH SIDE SPREADER LINK. 302 Supply and fixon wall with necessary arrangements busbar chamber 100 amps 4 way4 polewall mounted IP -31 , made out of 1.6 mmthick CRCA sheet epoxy powdwer coated single layer operational voltage 440 Volt , Short circuit current capacity 25 KA for 1 Secondincluding necessary cable connectionscompleteall as specified and directed.Note: Quoted rates inclusive of necessary fixing arrangement and cable connections , cable glands as required for proper fixing / functioning of Bus Bar Chamber. 303 Supply and fixon wall with necessary arrangements busbar chamber 200 amps 4 way4 polewall mounted IP -31 , made out of 1.6 mmthick CRCA sheet epoxy powdwer coated single layer operational voltage 440 Volt , Short circuit current capacity 25 KA for 1 Secondincluding necessary cable connectionscompleteall as specified and directed.Note: Quoted rates inclusive of necessary fixing arrangement and cable connections , cable glands as required for proper fixing / functioning of Bus Bar Chamber. 304 Dismentling ofdamage / broken coping of PCC/steel pole of any size anf and removing the debries from site complete all as specified and directed 305 Supply and fixing lantren of dia 60 CMfor fixing of flood light,cap type to be fixed on the top of 9 m SP-31 / 11 m SP-55Steel pole , made of MS pip medium gradedia greater than the top dia of the pole of length 0.35 M supported by MS flat iron of size 50X6 mm 8 nosincluding two coat of aliminium painting over a coat of redoxide primer complete all as directed 306 Dismantling LT steel tubuler pole of any height by taking out from PCC foundation complete and shifting to other location as directed including fixing the pole in true vertical position including excavation and earth work, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as base concrete and PCC 1:3:6 type C2 (using 20mm graded stone aggregate) in both foundation and coping of poles all as specified in SSR Part I-2009 and applying two coats of aluminium paint to pole surface complete all as directed by Engineer-in-Charge. 307 Supply anfd fix locally availablegate / gurden lightlight best qualitymetal Silver / metal blackDecorative Exterior of size not less than 300 mm X220 mm with and including LED bulb 9 wattsuitable for outdoor installationandsuitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directedincluding taking down old one . 308 Supply anfd fix locally availablegate / gurden lightlight best quality Black Color Steel Shade With Fiber Glass Outdoor Gate Lampof size not less than 360 mm X250 mm with and including LED bulb 9 wattsuitable for outdoor installationandsuitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directedincluding taking down old one . 309 Material and labour for Taking down UNSV LED Lights and removing Carbon from its connector joints incl replacement of Connecting wire with new PVC sheated weatherproof 3Xsingle core cable for electrical connection and refixing the fittingafter repair to its original/New location or as directed by engr-in-charge.(connecting wire will be measured and paid separately only) 310 S&F LED High Bay light 90 W lumanaries with with high luminous efficacy,IP 65 protected, front toughened glass with discrete high lumen LED along with Reflector including dismantling of old unserviceable fitting all accessories complete all as directed. 311 Supply anfd fix locally available Acrylic glob light best quality clear with and including LED bulb 9 watt of 200 mm dia complete suitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directed including taking down old one . 312 Supply anfd fix locally available Acrylic glob light best quality clear with and including LED bulb 9 watt of 300 mm dia complete suitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directedincluding taking down old one . 313 Material and Labour for drawing two runs ofPVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm including 20mm dia PVC conduitof dia 20 mm medium gradeexclusive of boxes but inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clampsetc complete all as specified 314 M&L for Servicing ofACB Breaker indoor/outdoor type of any make/model/capacity, checking of switching ON/OFF& tripping system, Spring charge Motor working system,checking of all electrical mechanical components of AMF panel and Setting the same for proper working of Breaker, testing of operation manually and auto mode complete all as directed by Engr-in-charge. Note:-All the mechanical parts are thoroughly cleaned by suitable cleaning agent & moving parts are properly lubricated 315 Supply&Fixing heavy duty box type capacitors 5kVAR in existing panel including including necessary wiring & misc accessroies for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. 316 Supply&Fixing heavy duty box type capacitors 10kVAR in existing panel including including necessary wiring & misc accessroies for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. 317 Supply&Fixing ofcapacitor duty contactor suitable for capacitor rating 5 kVAR ,50Hz,440v,3-ph,3-pole in existing panel including including necessary wiring & misc accessroies for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. 318 Supply&Fixing ofcapacitor duty contactor suitable for capacitor rating 10 kVAR ,50Hz,440v,3-ph,3-pole in existing panel including including necessary wiring & misc accessroies for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. 319 Supply&Fixing of Auto/Manual selector swtich in existing panel including including necessary wiring & misc accessroies for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. 320 Supply, Installation, test and Commissioning suitable size factoryfabricated, out door type,LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet of suitable size with projected Globe roof for rain water protection Dust and Vermin Proof ,Double door withboth side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embededwith 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level comp -lete withinternal connection with suitable size of cable ,cable lugs,and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Test-ing after Installation complete all as specified and comprising of the following :–(a) Aluminium bas bar 200amps - 04 Nos, supported with suitable size of heavy duty porcelin stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral.b) MCCB 100amps ,415 volt ,16 KA Breaking capacity4 pole Electromagnetic releaseduly connected to Bus Bar AsIN COMING- 01 NosMake Legrand model no: 420015/ Equivalent from Schinder/L&T/Hagar
Contract Date: Dec 27, 2024 Contract Value : ₹ 32.37 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 10
Telangana View Result →
29.
Defence #6866442 AOC
Repair Replacement Of Oh Crane Electric Operated Door Lifts Earthing And Other Connecting Items Under Ge Nagrota-M & L for servicing of 5/10 Ton capacity flame proof EOT crane of any make installed at different building/location at site, makingthe cranes in serviceable condition complete all as specified and directed with and including opeartions for maintenance specified as under:-(A) LONG TRAVERSE MOTION-(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.(d) Checking of grease in geared coupling and tighting of nut/bolts etc.(e) Checking of motion cut off at extreme ends with limit switches.(f) Checking drive shaft and coupling including tighting of nut and bolts.(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.(h) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. 2 (B) CROSS TRAVERSE MOTION(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.(d) Checking of grease in geared coupling and tighting of nut/bolts etc.(e) Checking of motion cut off at extreme ends with limit switches.(f) Checking drive shaft and coupling including tighting of nut and bolts.(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.(h) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (C) HOIST MOTION(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc.(e) Checking of motion cut off at extreme ends with limit switches.(f) Checking drive shaft and coupling including tighting of nut and bolts.(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.(h) Checking terminal connection of all hT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. 3 (D) ELECTRICALS(a) Checking and tightening all electric connection(b) Checking the contactors/ relays etc for overheating or flashinng.© Clening off all connection and control cables.(d) Properly bunching the loose control cable.(e) Checking functioning of cable carriers.(f) Checking the connection and serviceability of VVVF drives for smooth working. (E) GROUND MOTION CONTROL PANELOpening the push button control unit, checking all connection, replacing flashed/ over heated connections, general cleaning and checking all the functions,of the LT/CT/ Hoist motion push buttons and lights/ VVVF switch including reassembling the unit complete Notes : (i) Repair/overhauling of EOT Crane shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking EOT Cranes under repair, overhauling, etc.(ii)Make and model of part to be replaced shall be same as used/recommended by OEM. (iii) Repairing/replacement of unserviceable main components catered for separately under respective items of this Schedule shall be measured & paid for separately. (iv) Load as required for testing shall be arranged by the user/department. However, transportation of load for testing from the place of issue and return to the place of issue shall be responsibility of the contractor. (v) Contractor shall give a certificate after repair/overhauling of EOT Crane that Crane is serviceable & fully functional in all respect and ready to use for load.(h) Checking terminal connection of all hT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. 4 S & F in repair Repair to step down control transformer copper woundof PRI.V. 230 , SEC.V. -110,200 VA ,frequency 50Hz suitable for 2 to 5 Tonne capacity EOT cranecomplete all as specified and directed. 5 S & F contactor 20 Amps with 2 NO + 2NC including taking out old unserviceablecomplete all as specified and directed. 6 S & F contactor 25Amps with 2 NO + 2NC including taking out old unserviceablecomplete all as specified and directed. 7 S & F contactor 32 Amps with 2 NO + 2NC including taking out old unserviceablecomplete all as specified and directed. 8 M & L for push button switch with element in Flame proof Push Button Station as per require color code, including taking out old unserviceable one complete all as specified and directed. 9 Supply, fixingtesting & commissioning of AC drive, 5.5kW V/F control operated on 3 phase 415 Volt AC for hoist control CT/LT motor of EOT craneincluding taking out old unserviceable onecomplete all as specified and directed. 10 Supply, fixing and making allconnections for limit switch 40 Amps 415 Volts all as per existing for LT/CT/ hoist motion of 10 ton capacity crane including taking down unserviceable complete all as specified and directed. 11 Supply and fixing flame proof thrustor brake unit complete as per existing of capacity 18kg for drum size 100mm including taking down unserviceable complete all as specified and directed. 12 Supply only gear oil grade 680 suitable for hydraulic thruster brake complete all as directed. 13 Supply only Grease of required type/class for lubrication as specified and directed. 14 Supply only Ball bearing of size 6310 suitable for 10 Ton capacity gear box for main hoist complete all as specified and directed. 15 Supply only Ball bearing of size 6317 suitable for 10 Ton capacity gear box for main hoist complete all as specified and directed. 16 Supply only Ball bearing of size 6206 suitable for 10 Ton / 2 Ton capacity EOT crane for CT complete all as specified and directed. 17 Supply only Ball bearing of size 6212 suitable for 10 Ton / 2 Ton capacity EOT crane for Long Travel complete all as specified and directed. 18 Supply only Ball bearing of size 6210T suitable for 10 Ton / 2 Ton capacity EOT crane for Long Travel complete all as specified and directed. 19 S&F Steel wire rope 16 mm dia, 6 x 36 construction with tensile strength of 180 Kg/Sqmm with a factor of safety of 6 suitable for lifting load of 10 Ton including greasing complete all as specified and directed including taking down old unserviceable steel rope.Notes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor. 20 M&L for dismantling of following motors from 10 Ton / 2 Ton capacity EOT cranes, stripping out worn out bearings after dismantling including rewinding with super enameled copper wire of appropriate gauge as per existing and applying heat varnish properly with fine quality, replacement of ball bearing, insulating materials etc., and reassembling and fixing at its original position, testing complete all as specified & as directed :- 21 Slip Ring motor, 15 KW, 3 Phase, 415 Volts AC complete all as specified & as directed. 22 Slip Ring motor, 7.5 KW, 3 Phase, 415 Volts AC complete all as specified & as directed. 23 Squirrel cage motor, 1 to 3 KW, 3 Phase, 415 Volts AC complete all as specified & as directed. 24 S&F in repair Time delay relay – electro pneumatic with 1NO + 1NC contact blocks coil voltage 110 Volt, 0.5 to 60 sec, AC, complete all as specified & as directed. 25 S&F in repair Thermal over load relay of current setting range 20 - 32 Amps for 10 Ton EOT crane, complete all as specified & as directed. 26 S&F in repair Thermal over load relay of current setting range 16 - 25 Amps for 2 Ton EOT crane, complete all as specified & as directed.Make : Cat Part No. “3UA5800-2CZ2” of Make Siemens’ or equivalent in makes mentioned in Appendix B here-in-after. 27 S&F in repair Carbon bush along with holder for Hoist creep motion as used / recommended by OEM, complete all as specified & as directed. 28 S&F in repair Rubber bush for motor coupling as used / recommended by OEM, complete all as specified & as directed. 29 S&F in repair Rotary type limit switch with 40:1 ratio, suitable for 10 Ton capacity EOT crane for main hoist, of make as used / recommended by OEM, complete all as specified & as directed. 30 S&F in repair Rotary type limit switch with 40:1 ratio, suitable for 10 Ton capacity EOT crane for long travel, of make as used / recommended by OEM, complete all as specified & as directed. 31 S&F in repair PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) of size 2.5 Sqmm 4 Core, 1100 Volt, complete all as specified & as directed. 32 S&F in repair Trailing flexible copper conductor cable (ISI marked) of size 10 Sqmm 4 Core, 1100 Volt, with & including movable clamps and single flanged rollers, complete all as specified & as directed. 33 S&F in repair Thruster brake shoes of following sizes with necessary copper rivets etc complete of make Ferrodo liner or Usha or as used / recommended by OEM, complete all as specified & as directed :- 34 100 mm x 125 mm x 12mm thick. 35 100 mm x 75 mm x12mm thick. 36 112 mm x 100 mm x 12mm thick. 37 Material and labour for servicing /overhauling of electricaly/mannuallyopeated sliding steel doors of any size by applying grease on movable partsand replacement of the damaged parts if any required for smooth operations including cleaning of track and removal of mud / depositesand painting of steel doors with existingcolour with synthetic enemelled paint single coat on old surfaceinstalled in the various processing buildings/ Magazine and other technical buildings including preparation complete all as specified and as directed .Note :-The rate quoted is deemed to include for Spare/wornoutparts as required for replacement. 38 Material and labour for servicing /overhauling of gear boxes of Electrically operated door located at various locations including replacement of wornout spare parts of gear box if any required for smooth operation complete all as specified and directed by Engineer-in-Charge. Note :-Spare parts required for replacement will be measured and paid separately as Supply only. 39 Supply only ball bearing No. 6304. 40 Supply only ball bearing No. 6311. 41 Supply only ball bearing No. 4308 /6406. 42 Gear oil Multigrade 80W-90 43 Supply only worm gear (top gear) to operate rolling shutter. 44 Supply only shaft to operate worm gear. 45 Supply onlybowel gear (bottom gear) to operate rolling shutter. 46 Supply only worm shaft gear. 47 Supply only oil seal. 48 Supply and fix Solar PV Modules ofCrystalline Silicon Terrestrial PV Modules : IEC 61215 / IS14286 with Thin Film Terrestrial PV Modules : IEC 61646 with Concentrator PV Modules & Assemblies : IEC 62108 In addition, the modules must conform to IEC 61730 Part 1-requirements for construction & Part 2 - requirements for testing, for safety qualification or Equivalent IS. The PV modules must conform to the latest edition of any of the following IEC / equivalent BIS. Silicon Poly Crystalline SPV cells shall be used in the Solar Photovoltaic module.TheGeneral requirements for PV module:(i) Module shall be made up of mono or poly crystalline silicon cells.(ii) The interconnected cells shall be laminated in vacuum to withstand adverse environmental conditions (iii) The minimum clearance between the lower edge of the modules and the developed ground level shall be 300 mm. (iv) Surge arresting device to be provided at junction box, if provided,and module shall be provided with bypass diode.(v) The bidder shall carefully design & accommodate requisite numbers of the modules in the available area (refer layout attached with the tender) to achieve the rated power in his bid.(vi) The SPV module must be IEC 61215 and IEC 61730 Part I and Part II certified from any of the accredited certifying agencies(vii) Each Solar PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years from the completion of the trial run. 49 M& L forServicing and calibration of grid tied string type inverter of 50 KW installed at GE Nagrota with complete testing and servicing and make it fully functional complete all as specified and directed. Note : i) Serviving include the calibration and testing from OEM. 50 Supply and fix in reapir DC CABLESof 1 Core 4 mm² ofSolar Grade, UV resistant made of Multistrand ofTinned Copper Conductor interconnectingbetween module to module and string to module complete all as specfied and directed. 51 Supply and fix in reapirAC cables from invertor to ACDB of size 35 sqmm 4 core, copper conductor, PVC insulated, FRLS,fixed with saddles to wall and laying in ducts, complete all as directed at site. 52 M& L for Testing , Servcing & calibration of cloud based Monitoring System ( SCADA) by checking all the parametercurrent, Power, Voltage from the OEM. SCADA web operation shall be achieved thru Wi Fi/SIM based technology. Contractor has to provide SIM card for SCADA operation and maintain the connection for the entire period contract. 53 M& L forComprehensive maintenance of passengers lift to carry 8 passengerscapacity with a speed of 1 metre/ sec, of Make: Thyson groupto serve ground floor and 6 upper floors with AC variable voltage and variable frequency drive (VVVF DRIVE) system, micro processor based control system all as per IS 14665 hall position indicators on all floors, car position indicators in cabin, battery operated alarm bell and emergency lights including cabin light and fan over load switch, auto revelling, intercom facility with centre opening, stainless steel power operated sliding doors, including examining the operation, adjusting, lubricating and repairs as required to machine motor, controller parts, safety devices, governors, repair/ replacement as required to alarm bell, indicators, emergency light, emergency components, including low voltage protection relay, call bell, etc. complete all as specified and directed.Location : MAP Building- 04 Nos. Notes for Item No 51: (a) The contractor shall make AMC contract with the authorised service agency of lift and the repairs/ maintenance shall be carried out through the authorised service agency only. The quoted rate in deemed to be inclusive for comprehensive maintenance of 04 lifts at MAP building per month(b) The rate quoted shall be deemed to include for carrying out all repairs to lift noticed during the period by providing materials and labour.(c)Authorized rep of OEM will visit the lift and check it on monthly basis. 54 M & L for Comprehensive maintenance of passengers lift to carry 13 passengerscapacity with a speed of 1 metre/ sec, of Make: Thyson groupto serve ground floor and 6 upper floors with AC variable voltage and variable frequency drive (VVVF DRIVE) system, micro processor based control system all as per IS 14665 hall position indicators on all floors, car position indicators in cabin, battery operated alarm bell and emergency lights including cabin light and fan over load Material & labour for switch, auto revelling, intercom facility with centre opening, stainless steel power operated sliding doors, including examining the operation, adjusting, lubricating and repairs as required to machine motor, controller parts, safety devices, governors, repair/ replacement as required to alarm bell, indicators, emergency light, emergency components, including low voltage protection relay, call bell, etc. complete all as specified and directed.Location : MAP Building- 04 Nos.Notes for Item No 52: (a) The contractor shall make AMC contract with the authorised service agency of lift and the repairs/ maintenance shall be carried out through the authorised service agency only. The quoted rate in deemed to be inclusive for comprehensive maintenance of 04 lifts at MAP building per month (b) The rate quoted shall be deemed to include for carrying out all repairs to lift noticed during the period by providing materials and labour.(c)Authorized rep of OEM will visit the lift and check it on monthly basis. 55 Supply and FixSealed Maintenance Free (SMF) battery of capacity 12 V, 18AH, suitable for existing 3 phase online UPS as required at location including initial charging complete with inbuilt charger including electrolyte/ distilled water etc including taking down of old battery and shifting to MES store yard for deposit all as directed by engineer in charge complete all as specified.Notes for Item No 53:-(i)The contractor shall submit full replacement warranty certificate for minimum period of 02 years from the date of installation. (ii) The contractor shall supply SMF battery as and when demanded by Engineer-in-Charge during the currency of contract. 56 Refixing existing Aluminium strip of any size from building,Store house, Bunkers with porcelain insulator and tightly fix around the building complete all as specified and directed. Note : Necessary Saddles and Nails required for fixing the strip on wall shall be deemed including in items rate. 57 S&F in repairs12 mm dia and 300 mm long air termination, single pointed aluminium rod , complete all as specified and directed. 58 Supply and fixing in repair of aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed. 59 Supply and fix in repair GI strip of size 25 x 4 mm for earth continuity conductor or main earthing lead fixed to wall burried in ground fixed alongwith poles complete all as specified. 60 M&L forEarthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25×4 mmby means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 5 of SSR 2009 Part I connected to equipment, complete all as specified and testing on completion all as directed. 61 M&L forEarthing complete with copper plate electrode 60cmx60cmx3.15mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to copper strip of size20x3mm as earthing leadby means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 5 of SSR 2009 Part I connected to equipment, testing on completion, complete all as specified and directed. 62 M&L for earthing complete for bldg/4 pole structure/ 2 pole structurewith galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm diaby means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel,PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish ,internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge,80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled withcharcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified includingprovision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete ,all excavation andearth work & connecting the earthing to an earthing test point /Panel/ 4 pole struture / 2pole structureas specified and testing on completion complete all as directed. 63 Supply, Fixing , Commissioning and testing of CPRI approved outdoor cubical type LT Feeder Piller box suitable for 415 V, 3 Phase , 4 wire50 Hz , AC Supply system fabricated from MS sheet totally encloused ,dust, weather & vermin proof , 3.00 mm thick for outer shell and 2 mm thick for inner shell having MS section not less than 50x50x6 mm thick havingTPN aluminium busbar of capacity 500 Amps mounted on porcelain insulatorduly drilled hole for cable connection including front and rear side opening with locking arrangement, with MCCB 4P 400 Amp, 36 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables withglands includingcontrol wiring with minimum 1.5 sqmm PVC insulated copper conductor for measuring of voltage, amp with indicators RYB ,painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.Note:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 30 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. 64 Supply and fixingFeeder piller box out door type ‘factorymade’ made out from 16 SWG MS sheet supported with legs of 45cm long made of iron angle 25x25x4mm thick of size 75cm x60cm x45 cm with 04 Nos aluminiumbus bar of250 Amps mounted on porcelain insulatorduly drilled hole for cable connection including front and rear side opening with locking arrangement, with MCCB FP 200 Amp, 25 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables withglands including painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-ChargeNote:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 60 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. 65 Supply,laying, jointing and testingXLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area25 Sqmm 4 core, complete all as specified and directed by Engineer-in-Charge 66 Supply,laying, jointing and testingXLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area16 Sqmm 4 core, complete all as specified and directed by Engineer-in-Charge 67 M& L for Steel tubing galvanized(Light grade)40mm bore conforming to IS -1239 for passing cable under road /floor or fixing to poles for protection of underground cable complete all as specified and directed.. 68 M& L forSteel tubing galvanized(Light grade)25mm bore conforming to IS -1239 for passing cable under road /floor or fixing to poles for protection of underground cable complete all as specified and directed.. 69 Supply and fix wall mounted Busbar chambers 415 V, 3 phase, 4 wire 50 Hz AC supply system fabricated from stainless steel with 3 mm thick for outer cell TPN aluminium busbarof cap100 Amp 4 pole 8 wayconnected with proper Nut and bolt complete all as specfied and directed by Engineer -in-charge. 70 Supply and fix and laying thearrangment of GI pipe 15 mmfor the purpose of watering to earth pit along with bib tap in Main MRS station along with all earthing pit complete all as specfied and directed. 71 Supply and fixingsteel tubular pole, swaged, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints,type 410 SP-55 (11.0 metres long) complete, Including disconnectingand taking outold damage PCC pole all as directed . 72 M & L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete in foundation of pole/stays etc complete all as specified 73 M & L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete in foundation of pole/stays etc complete all as specified 74 M & L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping/above ground level around the pole etc complete all as specified. 75 Re-fixing of old serviceable tilted air termination rod of any size and type after straightening & dressing with and including suitable nut, bolts and washers to earth strip complete all as specified and directed. Note : The quoted rate include the necessary PCC work. 76 Supply and fixing GI earthing continuty conductor wire of 4mm dia with saddles/ insulators and fixing screws for roof/down conductors/ earth lead including brazing and nut bolts jointing at all joints for building/ hangar (roof/down conductor)/ pipe/ trench complete all as specified and directed. 77 Supply and fixing in replacement of saddle/insulator for earth strip with fixing arrangement in roof/ wall conductors of building/ hangar complete all as specified and directed. 78 Supply and fixing in replacement of GI funnel with wire mesh for earting pits of existing size complete all as specified and directed. 79 M&L for dismantling of PCC earth pit chamber and making new PCC earth pit chamber of size as per electrical plate No. 3 of SSR-2009 Part-I with PCC 1:2:4 type B1 with precast RCC 1:2:4 type B1 cover slab 54cm x 54cm x 5cm reinforce with 8mm dia TMT bars @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel including excavation and earth work as required at site complete all as specified and directed. 80 M&L for recharging of earthing pits by filling of magnesium sulphate, 100% water soluble fertilizer type in earthing pits complete all as specified and directed. Note:- Recharging materials shall be soluble in water and to be filled/ poured in earth pit after mixing in water in appropriate quantity. 81 M & L for MS Framed work as in framed structure (around 4 pole/2 pole/ LT pannel/ Transformer) guard bars, framed balusters and similar workscomplete including PCC work as in foundation complete all as specified. 82 M & L for Expended metal cut to length, bend to required shape weight not less than 4 kg/Sqm and laying with and including annealed MS wire or welded to steel members complete all as specified. 83 Material and labour for spreading and leveling evenly (any thickness) 20 mm graded stone aggregated complete all as specified and directed. 84 Material and labour for spreading and leveling evenly (any thickness) 40 mm graded stone aggregated complete all as specified and directed. 85 M&L for recharging of earthing pits by filling of common salt in earthing pits complete all as specified and directed. Note:- Recharging materials shall be soluble in water and to be filled/ poured in earth pit after mixing in water in appropriate quantity.
Contract Date: Feb 20, 2025 Contract Value : ₹ 22.36 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Jammu And Kashmir View Result →
30.
Defence #5527507 AOC
Tender For providing Of Certaind E/M Work Services Pertain To Revenue And Minor Work Under Ge Af Tech Area Agra- 1 INTERNAL ELECTRIFICATION Taking down carefully Aluminium/copper point wiring battentype/casing capping/concealed type any description (Light/ Fan/Socket or power)complete incl fitting, fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting etc and making good disturbed surface of wall/ceiling etc., all as specified and directed. 2 Taking down main switch/MCB DB/AC enclosure/Three phase enclosure by disconnecting the electric supply all as directed at site. 3 Taking down old XLPE cable of any size up to 25 Sqmm from wall/ceiling/truss/duct by disconnecting the electrical connection and descrewing the saddle clips/clamps and keeping aside to reuse the same after ceiling work complete all as specified and directed. 4 M&L for point wiringof complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including concealed PVC conduit ISI marked medium grade not less than 20mm dia with all accessories such as TEE, bend,elbow,reducers,sockets and junction boxes etc, concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint and bituminous coat of external portion to prevent the rust with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, all cable ends will be terminated with suiable brass thimbles to prevent the heating of termination point completefor One light/fan/exhaust fan point controlled by one way 5 Amp switch.with all accessories all as specified and directed: - 5 All as per Ser Item No 4 above but for one 3 pin/5 pin socket out let 5 Amp on independent board with indipendent circuit from DB box. 6 All as per Ser Item No 4 above but for one 3 pin/5 pin socket out let 5 Amp same board 7 All as per srl item No. 4 above but for 3/5 pin socket outlet for 15 Amps on independent board with indipendent circuit drawn from DB box with 2.5 sqmm PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 2.50 sqmm PVC insulated unsheathed solid copper conductor cable as earth continuity conductor complete all as specified & directed. 8 S&Fswitch piano, flush type 5 Amp single pole one way. 9 S&/F of switch piano, flush type 15 Amp . 10 S&Fof socket out let, flush type 5 pin 5 Amp. 11 S&/F of socket outlet multi purpose 3 pin 15 Amp and 3 pin 5 Amp, flush type. 12 S&Fof ceiling rose surface bakelite ISI Marked three terminal. 13 Supply and Fixlamp holder PVC/polycarbonate angular/batten type with back plate fancy type with three terminals isolated body all as specified. 14 S&F stepped type Electronic fan regulator flush mounted socket type complete all as specified and directed. 15 S&Fheavy duty exhaust fan steel body AC single phase 230 volts ,50 Hz of size 300mm sweep , 900 RPM with blades, frame and louvers fixing with cutting the existing wall of adequate size in round shape , making good the disturbed surface with cement mortor and grouting the louvers and nut bolts of exhaust fan complete all as spacified and directed. 16 Supply and fix LED tube light fitting 1x20 Watt , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose to fitting and complete all as specified and directed. 17 Supply and fixLED luminaire 600mmX600mm, 36 Watt, AC 230 Vrecessed type with high effeciency PMMA diffuser soft glare free light complete with driver, holders&LED lamp suitable for roof, ceiling including connecting up with driver threecore flexible copper conductor cable of suitable size complete all as specified and directed. 18 Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, BEE, 5 star rated motor complete all as specified and directed. 19 S&F in repair ofMCB DB of sheet metal enclosure double door type, single pole and neutral 8 way with 200 Amp rated bus bar 240V andgrouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate etc complete all as specified and directed. 20 S&F in repair of MCB DB of sheet metal enclosure double door type, single pole and neutral 4 way with 200 Amp rated bus bar 240V andgrouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate etc complete all as specified and directed. 21 S & fix in repair ofMCB SP 6 to 32 Amps, 240V C Series 10 KA etc complete all as specified and directed. 22 S & fix in renewal of MCB DP 40 to 63 Amp 240 Volts C series 10 KAetc complete all as specified and directed. 23 Supply and fix in renewal of LED street light 45 WattIP 66, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device including GI bracket made by 40mm GI pipe light grade bent to shape of length 1.5 mtrs and with GI clamps ,nut bolts etc grouting on walletc complete all as specified and directed. 24 S&F in replacement of sub main wiring drawing in and including concealed PVCconduit not less than 25mm dia medium grade with 2 run of single core PVC insulated unsheathed cable with stranded copper conductorof 06 Sqmm nominal area and PVC insulated unsheathed cable with stranded copper conductor of 06 Sqmm size single core as earth continuity wire and connected to earth dolly with proper crimping of thimbles bottle type and all as specified and directed. 25 S&F in replacement of sub main wiring drawing in and including concealed PVCconduit not less than 32mm dia medium grade with 4 Runs of PVC insulated unsheathed cable with stranded copper conductor cable of 10 Sqmm nominal area and single core PVC insulated unsheathed cable with stranded copper conductor of 10 Sqmm sizeas earth continuity wire and connected to earth dolly with proper crimping of thimbles bottle type and all as specified and directed. 26 S&F in renewal ofVTPN DB,4 way Vertical type,440V,3 phase with rated busbar 250 Amps, double door type , IP-54 protection and mechanical strength IK 09 ,isolated neutral busbar suitable for accomodate MCCB 3/4 pole 415 volts rating upto 250 Amp as a incomer and MCBs as out going ,grouted in walls by using PCC 1:2:4 type B1 etc complete all as specified and directed. 27 S & fix in renewal of MCCB DPX 160 thermal magnetic of 63 Amps 3 pole 16 KA, 415 Volts 50 Hz complete including connecting all incoming and outgoing connection by means of suitable size of lugs/thimbles all as specified and directed. 28 Supply and Laying in repair XLPE PVC sheathednsulated LTUG cable , beddedarmoured heavy duty electric cable 1100 volts grade with aluminum conductor 25 Sqmm 4 core laid intrenches or fixed on wall/floor/poles etc complete all as specified and directed. 29 Excavation in trenchesn. exc 1.5 m wide and n. exc. 1.5 m in depth for laying cables and getting outin soft/hard soil etc complete all as specified and directed. 30 Returning filling in including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in hard/dense soil after cable are laid and tested etc complete all as specified and directed. 31 Removing excavated surplus soil to a distance n. exc. 50m and deposited where directed at a level n. exc.1.5m above the starting point etc complete all as specified and directed. 32 M&L for sand filing with clean dry fine sandincluding gently punning around cables in trenches for cable protection complete all specified and directed. Note : punned thickness shall be measused and paid. 33 Supply & Laying sub class B briks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed. 34 M&L 50 mm dia GI tubing light grade with all fittings such as tee, bend,elbow,reducer, socket etc laid in trenches or fixed on pole/wall for protection ofLT UG cable etc complete all as specified and directed. 35 M&L for earthingwith galvanised steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron wire of size 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steelconnected to earthing test point all as specified incl excavation and earth work in any type of soil and disposal of surplus soil for a distance nexc 50m including 40 mm GI tubing light grade and necessary fitting for protection of copper strip incl laying of charcoal dust and common salt in atternate layer including earthing pit constructed in PCC (1:3:6) type C-1 using 20mm graded stone aggregatewith 40x40x6mm MS angle iron frame, RCC cover 40mm thick in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle made out of MS round on 12mm dia, plastering 15mm thick in CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia medium grade GI pipe for watering and GI wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing etc complete all as specified and directed including demolition of old earthing. 36 AIR CONDITIONING Supply and install testing and commissioning hi wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality minimum 5 star rating inverter type and EER 3.2.of capacity 2.0 TR and connected electrically indoor and outdoor with 2.5 Sqmm 4 core copper conductor multi stranded and all connected accessories ie wall mounting stand/bracket with MS nut bolts and all as specified and directed. 37 S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 volt all as directed. 38 Supply and fix the Refrigerant pipe of copper of size 1/4 suitable for AC s of capacity 2.0 TR including cutting and jointing and soldering etc alongwith insulation materials and condensing water PVC drainage pipe and all as specified and directed. 39 Supply and fix the Refrigerant pipe of copper of size 1/2 suitable for AC s of capacity 2.0 TR including cutting and jointing annd soldering etc alongwith insulation materials and all as specified and directed. 40 STAND BY POWER SUPPLY Supply and Fixing, Commissioning and testing the onlineUPS with isolation transformer for 30 Min back up three phase AC input 300 to 450V and output 415V (335 to 475) 50 Hz +6% , Out put 3 phase 415 Volts AC + 1% and 50Hz+ 0.1% capacity 7.5KVA with adequate No of batteries and stand for placing the batteries of 20 Nos 12Volts 26 AH along with connecting Copper Leads/cable to inter connect the batteries and UPS to Battery bank and all as specified and directed. 41 Supply and Fixing the MCCB 4pole 415 volts 63 to 100 Amp 50Hz, thermal adjustable magnetic type with rupturing capacity 25 KA enclosed in sheet steel enclosure of adequate size and having suitable incoming and outgoing cable entries and all as specified and directed. 42 M&L for point wiring in renewal of complete with stranded copper conductor 2.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including concealed PVC conduit ISI marked medium grade not less than 20mm dia with all accessories such as TEE, bend,elbow,reducers,sockets and junction boxes etc, concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint and bituminous coat of external portion to prevent the rust with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 2.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, all cable ends will be terminated with suiable brass thimbles to prevent the heating of termination point complete for One 15/16 Amp socket outlet controlled by one 15/16 Amp switch on indipendent board. 43 Supply and fix the cable tray to run the electric /power/AF Net cables of 10 Nos and the cable tray size is not less than 40x10Cm (widthxBearth) of made by GI sheet of thickness not les than 2mm supported with MS angle frame fabricated by using MS angle of size 40x40x6 mm, angle iron will be supported at every meter length to layout on wall with bracing and grouted in PCC 1:2:4 type B1 in wall and all as specified and directed. 44 Air ConditioningSupply and install testing and commissioning hi wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality minimum 5 star rating inverter type and EER 3.2.of capacity 1.5.0 TR and connected electrically indoor and outdoor with 2.5 Sqmm 4 core copper conductor multi stranded and all connected accessories ie wall mounting stand/bracket withMS nut & bolts etc complete all as specified and directed. 45 M&L for chemical earthing complete with Copper plate electrode of size 900mmx600mmx5 mm thick buried directly in earth pit not less than 4.7 meter below normal ground level and complete size of pit 1.6 meter x 0.61 meter x 5.10 meter, earth plate connected to copper strip 32x6mm by means of copper/ brass nut, bolts earth strip protected with 40 mm bore light grade GI pipe from electrode and upto and including the earth test point of gun metal , 20mm bore watering pipe, medium grade GI pipe including PGI funnel wiremesh providing alternate layer of 10 cm each charcoal salt and magnesium sulphate layer upto 1.2 meter and 2 Kg copper sulphate to be added around including excavation, in any type of soil returning in filling, removal of surplus soil to a distance not exceeding 50m, PCC pit in PCC 1:2:4 type B1 (using 20mm graded stone aggregate), as in earth pit with 40 x 40 x 6 mm MS Angle iron frame and pit cover of made by dholpur stone 40x40cm size and 40mm thick with well dressed and having of handle of made by 12mm MS Rod for lifting of pit cover,15mm thick plastering with CM (1:6) internally and upto 150mm below ground level externally, etccomplete all as specified and shown on electrical plate No 3 of SSR Part-I (2009) and connected to earth test incl testing. 46 S&F Copper strip of size 32X6 mm earth continuity conductor or main earthing lead fixed to wall on DMC type insulatorsor recess or chases or buried in ground or drawn in conduit/pipe etc. complete all as specified and directed. 47 Material and labour for breaking /demolishing the existing tarmac of thickness 45Cm of adequate size for chemical Earthing and making good the disturbed area by using PCC of 1:3:6 C-1 using 20mm graded aggregate and all as specified and directed. 48 M&L for MS sheet of size 40 x 20cm & thickness of 2mm shape of square/round/triangle as per sample including Angle Iron 25x25x3mm (90 cm long), framed work with shape of T etc, necessary welding, earthworks, etc including two coats of synthetic enamel paint over a coat of red oxide primer and marking the word TESTED ON -------, RESULT ------------- with different colour of synthetic enamel paint with suitable size of letters and allarrangements including grouting with PCC (1:3:6) type C-1 (Using 20 mm graded stone aggregates) of size 150x150x150mm complete all as specified and directed . 49 Supply and Laying XLPE PVC insulated and sheathedLTUG cable beddedarmoured heavy duty electric cable 1100 volts grade with aluminum conductor 10 Sqmm 2 core laid intrenches or fixed on wall/floor/poles etc complete all as specified and directed. 50 Supply and LayingGI Tubing of lights grade of 40 mm dia with all fittings and fixed complete to wall and ceiling or laid in floors/road/PCC floor/hard standings complete al as specified and directed 51 Supply and fix in replacementloop-in/loop-out box of outer size 155x210x92mm made out of FRP body (hot moulded type) with IP-63 protection and locking with screws alongwith 5/6 Amp rating MCB SP-01 No, up to 50 Amp rated 2 pole connector suitable to insert the cable size 25 Sqmm-01 No,with neutral linkand din rail suitable for mounting the MCB/Connector etc complete in side box and duly fixed with 25x3mm FI clamps with nut bolts of suitable size on PCC/Brick work pillar including cable glands, aluminum lugs/thimbles for incoming and out going cales andall as specified and directed. 52 Supply and fix the LED flood light fitting of IP-65 protection and 230 volts, 50 Hz of capacity 250 Watt connecting with three core flexible copper conductor of 1.5 Sqmm nominal area from light fitting to connector/junction box and all as specified and directed. 53 Material and labour plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in base of the pole as a foundationor pillar to errect flood lights below normal ground level 15 Cm and above ground level 75Cm including excavation in any type of soil etc completeall as specified and directed. 54 Supply and Laying XLPE PVC insulated and sheathed LTUG cablebeddedarmoured heavy duty electric cable 1100 volts grade with aluminum conductor 16 Sqmm 4 core laid intrenches or fixed on wall/floor/poles with GI saddle clips of two nos for every one meter complete all as specified and directed. 55 Supply and fix in renewalthree phase industrial socket 3P+N+E with MCB TPN 63 Amps capacity with sheet steel enclosure mounted on wall with all fixing arrangements and all as specified and directed 56 Supply and Fixing MCB TPN 415 Volts , 50HZ 63 Amp rating With rupturing capacity 10KA and fixing on existing LT panel board with minor modifications and all as specified and directed. 57 Supply and layingincluding taking down old u/s XLPE PVC insulated and sheathed LTUG cablebeddedarmoured heavy duty electric cable 1100 volts grade with aluminum conductor 95 Sqmm 3.5 core laid intrenches or fixed on wall/floor/poles etc complete all as specified and directed. 58 S & fixMCCB 4pole 415 volts of current rating 320-400 Amp 50 HZthermal magnetic adjustable type of 70-100% of rupturing capacity36 KA,complete including sheet steel enclosure having incoming, outgoing cables inlet.outlet holes to connecting all incoming and outgoing connection by means of suitable size of lugs/thimbles and proper cable glands of made by brassall as specified and directed 59 Supply, install, testing and commissioning of Servo controlled voltage stabilizer of Capacity 100 KVA ( Confirming to BIS 9815:Part 1 :1994) Three phase,50 Hz, Naturally Oil cooled , indoor , unbalanced type, copper wound, metallic body duly powder coated with lifting Hooks four nos , digital display type, relay free smooth and silent operation with 1st filling of Transformer oil up to level complete all as specified and directed and having following specification:-(a) Input voltage 300V-480V. (b)Output voltage stabilized at 415V +- 1%. (c) Rated frequency 50 Hz. (d) No distortion in wave form. (e) Response time not to exceed 20 mile seconds. (f)Sensitivity (+/-)1%. (g) Rate of correction 8 Volt/second for single phase and 13 volts per seconds for phase to phase.(h) Efficiency more than 95%. (j) Type of load : three phase, unbalanced type. (k) Digital display with multi-functional meter.Protections:-(1) Over load/Short Circuit protections on input side by MCCB160 Amp 4 pole 25 KVA(2) High/Low voltage cut off(3) By pass arrangement in case of emergency by on load changeover switch 160 amp 4 pole(4) Single phase sequence change protection 60 Supply and fix the On-load change over switch Front handle operated of 4 pole 415 volts with sheet steel enclosure of capacity 315/320 Amp and all as specified and directed. 61 M&L for earthing complete with galvanised steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron strip of size 32x6 mm by means of bolts, nuts check nuts and washers of galvanised iron or steelconnected to earthing test point all as specified incl excavation and earth work in any type of soil and disposal of surplus soil to a distance nexc 50m including 40 mm GI tubing light grade and necessary fitting for protection of copper strip incl laying of charcoal, dust and common salt in atternate layers including earthing pit constructed in PCC (1:3:6) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle made out of MS 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia medium grade GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing 62 B/R Portion (For CUAS Hard Kill)M&L MS deformed bars 10mm dia & overcut to length bent to shape required including cranking bending spirally for hooping columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. 63 Use and waste offormworkto sides of pillars,posts, struts, piers, columns,stanchions and blocks with fair finishedpolygon surface etc complete all as specified and directed 64 M&L forpreparation of new concrete wall surfaces and applying two coats of exterior emulsion paint our a one coat of primerin normalas per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. 65 M&L for aluminium Partition wall by using aluminium anodisedsection as in frame size 63.5 X 38.1 x 1.0mm thick includingglazing with 5mm thick Glasspaneling ( Size of paneln.exc 1.5 Sqm each ) and all necessary fittings with and including necessary accessories complete all as specified and as directed 66 M&L forPowder coated aluminiumdoor shutters by using aluminium anodised section weighing 0.55 kg/m including 3mm thick sheetglass, necessary joining cleats,glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. 67 M&L for MS framed work such as ladder, grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete as specified & directed. 68 M&L for mild steel rag or lewis bolts,screwed one end,with hexagonal or square nuts and washers,the other end enlarged ang jagged or lewised , nexc 15 cm long and 25mm in dia etc complete as specified & directed. 69 M&L for preparation for steel surfaces and applying two coats of synthetic enamel paint over a one coat of red oxide incl preparation of surfaces complete as specified & directed. 70 M&L for Providing cement concrete type B 1, 1:2:4 (using 20mm graded aggregate) as in copings,grouting apex stones, bed,roof surfaces etc including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.
Contract Date: Dec 09, 2024 Contract Value : ₹ 20.03 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
Karnataka View Result →
32.
Housing Urban and Rular Development #5184226 AOC
tender for Mow/Ar/Sr/Anurakshan/Sewage/ Deposit Works Of Govt. Resi. Qtrs. In Sect. No.15 Shivaji Nagar Under Rtc Sub Dn, Pwd Bhopalbldg. Sor Of 01.01.2024 Mow/Ar/Sr/Anurakshan/Sewage/ Deposit Works Of Govt. Resi. Qtrs. In Sect. No.15 Shivaji Nagar Under Rtc Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Jul 22, 2024 Contract Value : ₹ 81.00 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
33.
Power #5184013 AOC
Procurement Of Spares For Tipl ( Toshniwal Industries Pvt. Ltd. ) Make Thermowell Thermocouple Rtds Installed At Various Locations In 2X660mw, Sstpp, Mppgcl, Khandwa , T22rke9c3440.5 / Tc / M4468 / 22 Thermocouple Without Thermowell Construction : As Perdrg. No. 51005-61500-0508-02 Ref. Tag Nos.: 03Had01ct002, 03Had01ct052. Element: Duplex K Type ( Chromel / Alumel ) , Ungrounded Calibration: As Per Standard, Ansi, Mc 96.1, Class Standard. Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time:<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 4.5Mm Od Adaptor : ½ “Npt ( M ) X1 / 4 Npt ( F ) Compression Fitting : ¼”Npt ( M ) Adjustable; Pot Seal : Sleeve :Ss316 Crimping With Epoxy Seal With Extension Cable With Extension Bare Wire 70 Mm Long Connected With Lugs.Extension Cable :4 Wire , 3 / 22 Swg, Fg / Fg / Ss Wire Braided Cable, Mounting For Thermowell Connection: ½ “Npt ( M ) . Insertion Length ( Il ) ( Mm ) : 195Mm ; Thermowell Length : 270Mm; Sheath Length ( L ) =34405Mm , Extension Length ( U ) = 16000Mm , Temp Range: 0-600 Degc , T22rke9c1940.5 / Tc / M4468 / 23 Thermocouple Without Thermowell Item No.1 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Had01ct003, 03Had01ct053 Insertion Length ( Il ) ( Mm ) : 255 Mm ( For Reference ) Sheath Length ( L ) = 19405Mm Extension Length ( U ) =16000Mm ( For Extension Cable ) , T22rke9c2530 / Tc / M4468 / 24 Thermocouple Without Thermowell Same As Above Item No.1 For Thermocouple, But With Following Changes As Under Ref. Tag Nos.: 03Had01ct004, 03Had01ct054 Insertion Length ( Il ) ( Mm ) : 150 Mm ( For Reference ) Sheath Length ( L ) = 25300Mm Extension Length ( U ) =36000Mm ( For Extension Cable ) , T22rke9c2630 / Tc / M4468 / 25 Thermocouple Without Thermowell Same As Above Item No.1 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Had01ct005, 03Had01ct055 Insertion Length ( Il ) ( Mm ) : 150 Mm ( For Reference ) Sheath Length ( L ) = 26300Mm Extension Length ( U ) =36000Mm ( For Extension Cable ) , T22rke9c2440.5 / Tc / M4468 / 26 Thermocouple Without Thermowell Same As Above Item No.1 For Thermocouple, But With Following Changes As Under:Ref. Tag Nos.: 03Hah01ct001, 03Hah01ct002, 03Hah01ct00 3, 03Hah01ct051, 03Hah01ct052, 03Hah01ct053 Insertion Length ( Il ) ( Mm ) : 255 Mm ( For Reference ) Sheath Length ( L ) = 24405Mm Extension Length ( U ) =16000Mm ( For Extension Cable ) , T22rke9c2540.5 / Tc / M4468 / 27 Thermocouple Without Thermowell Same As Above Item No.1 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Hah02ct001, 03Hah02ct002, 03Hah02ct05 1, 03Hah02ct052 Insertion Length ( Il ) ( Mm ) : 255 Mm ( For Reference ) Sheath Length ( L ) = 25405Mm Extension Length ( U ) =36000Mm ( For Extension Cable ) , T22rke9c2443.5 / Tc / M4468 / 28 Thermocouple Without Thermowell Same As Above Item No.1 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Hah02ct003, 03Hah02ct004, 03Hah02ct00 5 03Hah02ct053, 03Hah02ct054, 03Hah02ct05 5 Insertion Length ( Il ) ( Mm ) : 282 Mm ( For Reference ) Sheath Length ( L ) = 24435Mm Extension Length ( U ) =16000Mm ( For Extension Cable ) , T22rke9c943.5 / Tc / M4468 / 29 Thermocouple Without Thermowell Same As Above Item No.1 For Thermocouple, But With Following Changes As Under: Earlier Supplied Ref. Tag Nos.: 03Hah03ct001, 03Hah03ct002, 03Hah03ct05 1, 03Hah03ct052 Insertion Length ( Il ) ( Mm ) : 282 Mm ( For Reference ) Sheath Length ( L ) = 9435Mm Extension Length ( U ) =16000Mm ( For Extension Cable ) , T22rke9c1740.5 / Tc / M4468 / 30 Thermocouple Without Thermowell Same As Above Item No.1 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Haj01ct001, 03Haj01ct051 Insertion Length ( Il ) ( Mm ) : 255 Mm ( For Reference ) Sheath Length ( L ) = 17405Mm Extension Length ( U ) =36000Mm ( For Extension Cable ) , T22rke9c2440.5 / Tc / M4468 / 31 Thermocouple Without Thermowell Same As Above Item No.1 For Thermocouple, But With Following Changes As Under:Ref. Tag Nos.: 03Haj02ct001, 03Haj02ct002, 03Haj02ct003, 03Haj02ct051, 03Haj02ct052, 03Haj02ct053 Insertion Length ( Il ) ( Mm ) : 255 Mm ( For Reference ) Sheath Length ( L ) = 24405Mm Extension Length ( U ) =36000Mm ( For Extension Cable ) , T42rkq9c192.3 / Tc / M4468 / 1 Thermocouple With Thermowell Construction : As Perdrg. No. .51005-61500-0508-04 Sheet 3 Ref. Tag Nos.: 03Hfc01ct001, 03Hfc01ct002, 03Hfc01ct003, 3Hfc02ct001, 03Hfc02ct002, 03Hfc02ct003, 03Hfc03ct001, 03Hfc03ct002, 3Hfc03ct003, 03Hfc04ct001, 03Hfc04ct002, 03Hfc04ct003, 03Hfc05ct001, 03Hfc05ct002, 03Hfc05ct003, 03Hfc06ct001, 03Hfc06ct002, 03Hfc06ct003. Element: Duplex K Type ( Chromel / Alumel ) , 16 Awg, Ungrounded Calibration: As Per Standard, Ansi, Mc 96.1, Class Standard. Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time:<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium Explosion Proff , Zone 1&2, With Group Iia / Iib With Screwed Cover, Protection Class Ip-66 , Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long .Thermowell : Construction : Protection Tube For Ducts Thermowell Material: Ss316. Size Of Thermowell :1 / 2 Inch Nb Sch 160 Instrument Connection : ½ Inch Npt ( F ) Process Connection : Ss Flange – 1 ½ Inch Ansi, 300 # Rf With Meting Flange & All Required Hardware Like Gaskets, Nut , Bolt And Washers. Nozzle Pipess , 48.3 Mm Odx3.68Mm Wt Approax. Insertion Length ( Mm ) : 1400Mm, Nozzle Length ( Mm ) Outside Of Duct :310 Mm, Thermowell Extension Length :63 Mm Thermowell Length : 1773 Mm, Element Length Below Head : 1923 Mm, Temp Range 0-800 Degc , T42rkq9c242 / Tc / M4468 / 2 Thermocouple Without Thermowell Construction : As Perdrg. No. .51005-61500-0508-04 Sheet 4 Ref. Tag Nos.:03Hfe05ct001, 03Hfe05ct051 Element: Duplex K Type ( Chromel / Alumel ) , 16 Awg, Ungrounded Calibration: As Per Standard, Ansi, Mc 96.1, Class Standard. Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time:<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium With Screwed Cover; Protection Class Ip-67 , Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long . Thermowell : Construction : Protection Tube For Ducts Thermowell Material: Ss316. Size Of Thermowell :1 / 2 Inch Nb Sch 160 Instrument Connection : ½ Inch Npt ( F ) Process Connection : Ss Flange – 1 ½ Inch Ansi, 300 # Rf With Meting Flange & All Required Hardware Like Gaskets, Nut , Bolt And Washers. Nozzle Pipess , 48.3 Mm Odx3.68Mm Wt Approax., Thermowell : Construction : Protection Tube For Ducts, Insertion Length ( Mm ) : 1500Mm Nozzle Length ( Mm ) Outside Of Duct :720 Mm, Thermowell Extension Length :50 Mm, Thermowell Length : 2270 Mm Element Length Below Head : 2420 Mm , T42rkq9c252 / Tc / M4468 / 3 Thermocouple Without Thermowell Same As Above Item No. 12 For Thermocouple, But With Following Changes As Under: Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 4Ibr Certification: Na Ref. Tag Nos.: 03Hla05ct001, 03Hla05ct002, 03Hla05ct003, 03Hla05ct051, 03Hla05ct052, 03Hla05ct053 Insertion Length ( Mm ) : 1500 Mm Nozzle Length ( Mm ) Out Side Of Duct: 820 Mm Thermowell Extension Length: 50 Mm Thermowell Length: 2370 Mm Element Length Below Head: 2520Mm , T42rkq9c252 / Tc / M4468 / 4 Thermocouple Without Thermowell Same As Above Item No. 12 For Thermocouple, But With Following Changes As Under: Construction : As Perdrg. No. .51005-61500-0508-04 Sheet 5 , Ibr Certification: Na Ref. Tag Nos.: 03Hna01ct001, 03Hna01ct002, 03Hna01ct00 3, 03Hna01ct051, 03Hna01ct052, 03Hna01ct053, 03Hna04ct00 1, 03Hna04ct002, 03Hna04ct051, 03Hna04ct052, 03Hna05ct00 1, 03Hna05ct051, 03Hna06ct001, 03Hna06ct051. Thermowell Material : Inconel 600, Insertion Length ( Mm ) : 1500 Mm Nozzle Length ( Mm ) Out Side Of Duct: 820 Mm Thermowell Length: 2370 Mm Element Length Below Head: 2520Mm , T42rko9c49.5 / Tc / M4468 / 5 Thermocouple Without Thermowell Ibr Certification: Na ( Due To Not Required Thermowell ) Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 6. Ref. Tag Nos.: 03Hag03ct004, 03Hag03ct005, 03Hag03ct006, 03Had01ct001, 03Had01ct051 Element: Duplex K Type ( Chromel / Alumel ) , 20 Awg, Ungrounded Calibration: As Per Standard, Ansi, Mc 96.1, Class Standard. Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time:<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 6Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium With Screwed Cover; Protection Class Ip-67 , Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long . Thermowell : Not Required Insertion Length ( Mm ) : 188Mm Thermowell Extension Length :172 Mm Thermowell Length : 360 Mm Element Length Below Head : 495 Mm Temp Range: 0-600 Degc , T42rko9c51.9 / Tc / M4468 / 8 Thermocouple Without Thermowell Same As Above Item No.15 For Thermocouple, But With Following Changes As Under: Ibr Certification: Na ( Due To Not Required Thermowell ) Ref. Tag Nos.: 03Had01ct006, 03Had01ct007, 03Had01ct00 8, 03Had01ct056, 03Had01ct057, 03Had01ct05 8, 03Hag01ct001, 03Hag01ct002, 03Hag01ct05 1, 03Hag01ct052, 03Hag03ct001, 03Hag03ct002, 03Hag03ct003 Insertion Length ( Mm ) : 213 Mm ( For Reference ) Thermowell Extension Length: 171 Mm ( For Reference ) Thermowell Length: 384 Mm ( For Reference ) Element Length Below Head: 519 Mm , T42rkq9c55 / Tc / M4468 / 12 Thermocouple Without Thermowell ( Thermocouple Suitable For Item No. 23 For Thermowell As Mentioned Below ) Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 7 Ref. Tag Nos.: 03Hag03ct007 Element: Duplex K Type ( Chromel / Alumel ) , 16 Awg, Ungrounded Calibration: As Per Standard, Ansi, Mc 96.1, Class Standard. Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time: :<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium With Screwed Cover; Protection Class Ip-67 , Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long . Element Length Below Head : 550 Mm , T42rkq9c71 / Tc / M4468 / 13 Thermocouple Without Thermowell Same As Above Item No. 17 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Lab24ct029, 03Lab24ct030, 03Lab24ct031, 03Lab24ct032 Element Length Below Head: 710Mm , T42rkq9c74 / Tc / M4468 / 14 Thermocouple Without Thermowell Same As Above Item No. 17 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Lba10ct011, 03Lba10ct012, 03Lba10ct013, 03Lba10ct051, 03Lba10ct052, 03Lba10ct053 Element Length Below Head: 740 Mm , T42rkq9c83 / Tc / M4468 / 15 Thermocouple Without Thermowell Same As Above Item No. 17 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Lbb10ct001, 03Lbb10ct002, 03Lbb10ct003, 03Lbb10ct051, 03Lbb10ct052, 03Lbb10ct053 Element Length Below Head: 830 Mm , T42rkq9c66 / Tc / M4468 / 16 Thermocouple Without Thermowell Same As Above Item No. 17 For Thermocouple, But With Following Changes As Under: Ref. Tag Nos.: 03Lbc10ct011 Element Length Below Head: 660 Mm , T42rkq9c34.3 / Tc / M4468 / 17 Thermocouple Without Thermowell Ibr Certification: Required Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 8 Ref. Tag Nos.: 03Laf01ct010 Element: Duplex K Type ( Chromel / Alumel ) , 16 Awg, Ungrounded Calibration: As Per Standard, Astm E230, Class Standard. Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time:<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium With Screwed Cover; Protection Class Ip-67 , Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long .Thermowell : Drilled Bar Stock , Ss 316 , 41.275 Mm Od To 25.4 Mm Tip Dia Tapered 80 Mm Long From Tip X 9Mm Id Process Connection : Welded- 41.275 Od Insertion Length ( Mm ) : 80Mm, Thermowell Length : 143 Mm Insulation Thickness : 100 Mm ( Not Considered As Required50 Mm Long Required Extra Nipple ) Extra Nipple Length Of Thermowell : 50 Mm , Total Length Of Thermowell ( Including Extra Nipple ) : 143 Mm +50 Mm = 193 Mm, Element Length Below Head :343Mm , T42rkq9c30 / Tc / M4468 / 18 Thermocouple With Thermowell Ibr Certification: Required Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 9 Ref. Tag Nos.: 03Hhm10ct001 Element: Duplex K Type ( Chromel / Alumel ) , 16 Awg, Ungrounded Calibration: As Per Standard, Ansi, Mc 96.1, Class Standard. Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time: <20 Seconds For Measurement With Thermowell&10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium With Screwed Cover; Protection Class Ip-67 , Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long . Thermowell : Construction : Bar Stock For Pipes Thermowell Material: Ss316. Size Of Thermowell :28Mm Od To 24 Mm Tip Dia Tapered From Tip X 9Mm Id Instrument Connection : ½ Inch Npt ( F ) Process Connection : M33x2 ( M ) . Insertion Length ( Mm ) : 100Mm Thermowell Extension Length :50 Mm Thermowell Length : 150 Mm Element Length Below Head : 300 Mm , T42rkq9c25.5 / Tc / M4468 / 19 Thermocouple With Thermowell Same As Above Item No. 23 For Thermocouple, But With Following Changes As Under: Ibr Certification: Required Construction : As Perdrg. No. .51005-61500-0508-04 Sheet 9 .Ref.Tag Nos.:03Hag03ct037 Insertion Length ( Mm ) : 65 Mm Thermowell Extension Length: 40 Mm Thermowell Length: 105 Mm Element Length Below Head: 255 Mm , T42rkq9c36.5 / Tc / M4468 / 38 Thermocouple With Thermowell Same As Above Item No. 23 For Thermocouple, But With Following Changes As Under: Ibr Certification: Required Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 9 Ref. Tag Nos.: 03Hcb01ct001 Insertion Length ( Mm ) : 100 Mm Thermowell Extension Length: 115 Mm Thermowell Length: 215 Mm Element Length Below Head: 365Mm , T42rkq9c34 / Tc / M4468 / 20 Thermocouple With Thermowell Same As Above Item No. 23 For Thermocouple, But With Following Changes As Under: Ibr Certification: Required Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 9. Earlier Ref.Tag Nos.: 03Hcb01ct010, 03Hcb01ct011, 03Hcb01ct012, 03Hcb01ct013, 03Hcb01ct014, 03Hcb01ct015, 03Hcb01ct016, 03Hcb01ct017, 03Hld01ct030, 03Hcb01ct002, 03Hcb01ct003, 3Hcb01ct004, 03Hcb01ct006, 03Hcb01ct007, 03Hcb01ct008, 3Hcb01ct009 , 03Hcb01ct018, 03Hld01ct031, 03Hld01ct032. Insertion Length ( Mm ) : 100 Mm Thermowell Extension Length: 190 Mm Thermowell Length: 290 Mm Element Length Below Head: 340Mm , T42rkq9c31 / Tc / M4468 / 21 Thermocouple With Thermowell Same As Above Item No. 23 For Thermocouple, But With Following Changes As Under: Ibr Certification: Required Construction : As Per Our Drg. No. .51005-61500-0508-04 Sheet 9 Ref. Tag Nos.:03Hlc01ct001 Nsertion Length ( Mm ) : 120 Mm Thermowell Extension Length: 40 Mm Thermowell Length: 160 Mm Element Length Below Head: 310Mm , Sac / Twell / M4549 / 1 Thermowell ( Thermowell Suitable For Item No. 17 For Thermocouple -Temp. Element As Mentioned Above ) Construction : As Per Drg. No. .51005-61500-0508-04 Sheet. Ibr Certification: Required Ref. Tag Nos.: 03Hag03ct007 Thermowell: Instrument Connection: 1 / 2 Inch Npt ( F ) Thermowell: Construction: Bar Stock For Pipes Thermowell Material : Ss316 Size Of Thermowell: 41.275 Mm Od To 25.4 Mm Tip Dia Tapered 94 Mm Long From Tip X 9 Mm Id. Process Connection: Welded-41.275 Od Insertion Length: 270 Mm Thermowell Extension Length: 63 Mm Thermowell Length: 333 Mm Insulation Thickness: 215 Mm ( Not Considered As Required 50 Mm Long Required Extra Nipple ) Extra Nipple: Ss Nipple, 1 / 2 Inch Npt ( F ) To Connect The Thermowell & Extension Assy Nipple Union Nipple. Extra Nipple Length Of Thermowell: 67 Mm. Total Length Of Thermowell ( Including Extra Nipple ) : 333 Mm + 67 Mm= 400 Mm, Ibr Certificate: Remarks: Ibr Certificate: Kindly Provide The Current Process Data To Verify The Size Of Thermocwell As Per Standard Asme Ptc 19.3 , Sac / Twell / M4549 / 2 Thermowell ( Thermowell Suitable For Item No. 17 For Thermocouple -Temp. Element As Mentioned Above ) Same As Above Item No. 28 For Thermocouple, But With Following Changes As Under: Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 10. Ibr Certification: Required Ref. Tag Nos.: 03Lab24ct029, 03Lab24ct030, 03Lab24ct031, 03Lab24ct032 Insertion Length ( Mm ) : 320 Mm Thermowell Length: 383 Mm Insulation Thickness: 177 Mm ( Not Considered As Required 50 Mm Long Required Extra Nipple ) Total Length Of Thermowell ( Including Extra Nipple ) : 383 Mm + 177 Mm= 560 Mm , Sac / Twell / M4549 / 3 Thermowell ( Thermowell Suitable For Item No. 17 For Thermocouple -Temp. Element As Mentioned Above ) Same As Above Item No. 28 For Thermocouple, But With Following Changes As Under: Construction : As Per Our Drg. No. .51005-61500-0508-04 Sheet 10 Sent By You Supplied By Us To Lmb. Ibr Certification: Required Earlier Supplied Ref. Tag Nos.: 03Lba10ct011, 03Lba10ct012, 03Lba10ct013, 03Lba10ct051, 03Lba10ct052, 03Lba10ct053 Thermowell Material : Sa-182 F91 Insertion Length ( Mm ) : 130 Mm Thermowell Length: 193 Mm Insulation Thickness: 365 Mm ( Not Considered As Required 50 Mm Long Required Extra Nipple ) Extra Nipple Length Of Thermowell: 397 Mm Total Length Of Thermowell ( Including Extra Nipple ) : 193 Mm + 397 Mm= 590 Mm. , Sac / Twell / M4549 / 4 Thermowell ( Thermowell Suitable For Item No. 17 For Thermocouple -Temp. Element As Mentioned Above ) Same As Above Item No. 28 For Thermocouple, But With Following Changes As Under: Construction : As Per Drg. No. .51005-61500-0508-04 Sheet 10. Ibr Certification: Required Ref. Tag Nos.: 03Lbb10ct001, 03Lbb10ct002, 03Lbb10ct003, 03Lbb10ct051, 03Lbb10ct052, 03Lbb10ct053 Thermowell Material : Sa-182 F91 Insertion Length ( Mm ) : 140 Mm Thermowell Length: 203 Mm Insulation Thickness: 425 Mm ( Not Considered As Required 50 Mm Long Required Extra Nipple ) Extra Nipple Length Of Thermowell: 477 Mm Total Length Of Thermowell ( Including Extra Nipple ) : 203 Mm + 477 Mm= 680 Mm , Sac / Twell / L / M4549 / 5 Thermowell ( Thermowell Suitable For Item No. 17 For Thermocouple -Temp. Element As Mentioned Above ) Construction : As Perdrg. No. .51005-61500-0508-04 Sheet 10. Same As Above Item No. 28 For Thermocouple, But With Following Changes As Under: Ibr Certification: Required Tag Nos.:03Lbc10ct011 Insertion Length ( Mm ) : 230 Mm Thermowell Length: 393 Mm Insulation Thickness: 315 Mm ( Not Considered As Required 50 Mm Long Required Extra Nipple ) Extra Nipple Length Of Thermowell: 217 Mm Total Length Of Thermowell ( Including Extra Nipple ) : 393 Mm + 217 Mm= 510 Mm , T42rpq3c36.3 / Rtd / M4468 / 32 Rtd With Thermowell Ibr Certification: Na Construction : As Per Drg. No. .51005-61500-0508-06 Sheet 3. Ref. Tag Nos.: 03Hfc01ct004 , 03Hfc01ct005, 03Hfc01ct006, 03Hfc01ct007, 03Hfc02ct004, 03Hfc02ct005, 03Hfc02ct006, 03Hfc02ct007, 03Hfc03ct004, 03Hfc03ct005, 03Hfc03ct006, 03Hfc03ct007, 03Hfc04ct004, 03Hfc04ct005 , 03Hfc04ct006, 03Hfc04ct007, 03Hfc05ct004, 03Hfc05ct005, 03Hfc05ct006, 03Hfc05ct007, 03Hfc06ct004, 03Hfc06ct005, 3Hfc06ct006, 03Hfc06ct007. Element: Duplex, Pt 100, 3 Wire, 18 Awg, Calibration: As Per Standard, Iec 60751, Class A Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time:<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium With Screwed Cover Protection Class Ip-66Explosion Proff , Zone 1&2, With Group Iia / Iib With Screwed Cover, Protection, Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long .Thermowell : Construction : Bar Stock For Pipes Thermowell Material: Straight Tungsten Carbide For 150Mm Long From Tip And Balance Material Ss 316 On Top. Size Of Thermowell :22Mm Od X 12Mm Id Instrument Connection : ½ Inch Npt ( F ) Process Connection : Ss Flange – 1 ½ Inch Ansi, 300 # Rf Insertion Length ( Mm ) : 150Mm, Thermowell Extension Length :63 Mm, Thermowell Length : 213 Mm, Element Length Below Head : 363 Mm, Temp Range 0-400 Degc , T42rpq3c26.5 / Rtd / M4468 / 33 Rtd With Thermowell Ibr Certification: Na Construction : As Per Our Drg. No. .51005-61500-0508-06 Sheet 4 Sent By You Supplied By Us To Lmb. Earlier Supplied Ref. Tag Nos.: 03Hhf30ct001, 03Hhf20ct001, 03Hhf20ct002, 03Hhf20ct003. Element: Duplex, Pt 100, 3 Wire, 18 Awg, Calibration: As Per Standard, Iec 60751, Class A Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time:<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Cast Aluminium With Screwed Cover Protection Class Ip-66Explosion Proff , Zone 1&2, With Group Iia / Iib, Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long . Thermowell : Construction : Bar Stock For Pipes Thermowell Material: Ss 316 .Size Of Thermowell :28Mm Od X 24Mm Tip Diatapered From Tip X 9Mm Id, Instrument Connection : ½ Inch Npt ( F ) Process Connection : M32x2 ( M ) , Insertion Length ( Mm ) : 65Mm, Thermowell Extension Length :50 Mm Thermowell Length : 115 Mm, Element Length Below Head : 265 Mm Temp Range 0-400 Degc , T42rpq3c35 / Rtd / M4468 / 34 Rtd With Thermowell Ibr Certification: Na Construction : As Perdrg. No. .51005-61500-0508-06 Sheet 5 Ref. Tag Nos.: 03Pga01ct001, 03Pga02ct001 Element: Duplex, Pt 100, 3 Wire, 18 Awg, Calibration: As Per Standard, Iec 60751, Class A Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time: <20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium With Screwed Cover; Protection Class Ip-67 , Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long . Thermowell : Construction : Bar Stock For Pipes Thermowell Material: Ss316. Size Of Thermowell :28Mm Od To 24Mm Tip Dia Tapered From Tip X 9Mm Id, Instrument Connection : ½ Inch Npt ( F ) Process Connection : M33x2 ( M ) Insertion Length ( Mm ) : 150Mm Thermowell Extension Length :50 Mm Thermowell Length : 200 Mm Element Length Below Head : 350 Mm , T42rpq3c42 / Rtd / M4468 / 35 Rtd With Thermowell Same As Above Item No. 35 For Thermocouple, But With Following Changes As Under: Ibr Certification: Na Construction : As Per Drg. No. .51005-61500-0508-06 Sheet 5 Ref. Tag Nos.:03Lcq02ct001, 03Lcq02ct002 Insertion Length ( Mm ) : 220 Mm Extension Length Of Thermowell: 50 Mm Thermowell Length: 270 Mm Element Length Below Head: 420Mm , T42rpq3c221.5 / Rtd / M4468 / 36 Rtd With Thermowell Ibr Certification: Na Construction : As Per Drg. No. .51005-61500-0508-06 Sheet 5 Ref. Tag Nos.: 03Hla02ct001, 03Hla02ct051, 03Hfe04ct001, 03Hfe04ct051, 03Hla04ct001, 03Hla04ct002, 03Hla04ct051, 03Hla04ct052 Element: Duplex, Pt 100, 3 Wire, 18 Awg, Calibration: As Per Standard, Iec 60751, Class A Insulation Material: Magnesium Oxide ( Purity Above 99.4 % ) Response Time: Response Time:<20 Seconds For Measurement With Thermowell &10 Second For Control Without Thermowell.Sheath :Ss316 , 8Mm Od Terminal Block : Nickel Plated Brass- Screw Type Silver Plated Spring Loaded Terminal Head: Die Case Aluminium With Screwed Cover; Protection Class Ip-67 , Ss Chain , Gasket & Tag Plate & Name Plate : Tag Number , Service Engraved In Stainless Gland :3 / 4 Inch Npt Double Compression Type With Nickel -Plated Brass. Extension Assy: Nipple Union Nipple : ½ Inch Nb Sch 80 , ½ Inch Npt ( M ) , 150 Mm Long .Thermowell : Construction : Protection Tube For Ducts Thermowell Material: Ss316. Size Of Thermowell :1 / 2 Inch Nb Sch 160 Instrument Connection : ½ Inch Npt ( F ) Process Connection : Cs Flange – 1 ½ Inch Ansi, 300 # Rf With Meting Flange & All Required Hardware Like Gaskets, Nut , Bolt And Washers. Nozzle Pipess , 48.3 Mm Odx3.68Mm Wt Approax., Insertion Length ( Mm ) : 1500Mm, Nozzle Length ( Mm ) Outside Of Duct :515 Mm, Thermowell Length : 2065 Mm, Element Length Below Head : 2215 Mm, Temp. Range : 0-400Degc , T42rpo3c12 / Rtd
Contract Date: Jul 16, 2024 Contract Value : ₹ 19.36 Lakh
Government Departments No of Bidders 1
Madhya Pradesh View Result →
34.
Housing Urban and Rular Development #5183652 AOC
tender for Mow/Ar/Sr/Anurakshan/Sewage/ Other Various Works Of Govt. Resi. Qtrs. In Under M-1 Sub Dn, Pwd Bhopalbldg. Sor Of 01.01.2024 Mow/Ar/Sr/Anurakshan/Sewage/ Other Various Works Of Govt. Resi. Qtrs. In Under M-1 Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Aug 05, 2024 Contract Value : ₹ 80.00 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
35.
Housing Urban and Rular Development #5181955 AOC
tender for Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. Qtrs. In Shivaji Nagar C Type And Other Under Rtc Sub Dn, Pwd Bhopalbldg. Sor Of 01.01.2024 Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. Qtrs. In Shivaji Nagar C Type And Other Under Rtc Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Aug 01, 2024 Contract Value : ₹ 75.00 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
36.
Housing Urban and Rular Development #5181469 AOC
tender for Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. Qtrs. In Sect. No.1 (74 Bunglow) B Type And Other Under M-1 Sub Dn, Pwd Bhopal Bldg. Sor Of 01.01.2024 Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. Qtrs. In Sect. No.1 (74 Bunglow) B Type And Other Under M-1 Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Aug 30, 2024 Contract Value : ₹ 88.00 Lakh
Government Departments No of Bidders 2
Madhya Pradesh View Result →
37.
Housing Urban and Rular Development #5180806 AOC
tender for Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. Qtrs. In Under Rtc Sub Dn, Pwd Bhopal Bldg. Sor Of 01.01.2024 Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. Qtrs. In Under Rtc Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Aug 01, 2024 Contract Value : ₹ 83.00 Lakh
Government Departments No of Bidders 2
Madhya Pradesh View Result →
38.
Housing Urban and Rular Development #5180649 AOC
tender for Mow/Ar/Sr/Anurakshan/Deposit Work Of Govt. Resi. Qtrs. Under M-1 Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Jul 23, 2024 Contract Value : ₹ 50.00 Lakh
Government Departments No of Bidders 4
Madhya Pradesh View Result →
39.
Housing Urban and Rular Development #5179492 AOC
tender for Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. Qtrs. In Sect. No.1 (74 Bunglow) Under M-1 Sub Dn, Pwd Bhopal Bldg. Sor Of 01.01.2024 Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. Qtrs. In Sect. No.1 (74 Bunglow) Under M-1 Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Jul 31, 2024 Contract Value : ₹ 85.00 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
40.
Housing Urban and Rular Development #5179044 AOC
tender for Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. E/C Type And Other Quarters Under Sect. No.15 Rtc Sub Dn, Pwd Bhopalbldg. Sor Of 01.01.2024 Mow/Ar/Sr/Anurakshan/Sewage/ Other Works Of Govt. Resi. E/C Type And Other Quarters Under Sect. No.15 Rtc Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Jul 29, 2024 Contract Value : ₹ 82.00 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
41.
Housing Urban and Rular Development #5177972 AOC
tender for Mow/Ar/Sr/Anurakshan/Deposit Work Of Govt. Resi. Qtrs. And Various Bunglow In Sect. No. 1 (74Bunglow) Under M-1 Sub Dn, Pwd Bhopal, Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Add extra for every additional lead of 50 metre or part thereof. Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40mm nominal size Stone aggregate 40mm nominal size and above Stone soling Bricks S.W. Pipes 100 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 and 500 mm dia 600, 700, 750 and 800 mm dia Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. beyond 30 cm girth up to and including 60 cm girth beyond 60 cm girth up to and including 120 cm girth beyond 120 cm girth up to and including 240 cm girth above 240 cm girth Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc., not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) All kinds of soil. Ordinary or hard rock. Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Deduct for disposed soil not levelled and neatly dressed. Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. Deduct for not watering with the excavated earth for bankingfilling Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. Permanent piping system with Junction boxes Anti-termite chemical injected area Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) Cement mortar 1:1 (1 cement: 1 sand) Cement mortar 1:2 (1 cement: 2 sand). Cement mortar 1:3 (1 cement: 3 sand). Cement mortar 1:4 (1 cement: 4 sand). Cement mortar 1:5 (1 cement: 5 sand). Cement mortar 1:6 (1 cement: 6 sand). Cement mortar 1:2 (1 cement: 2 stone dust). Cement mortar 1:2 (1 cement: 2 marble dust). White cement mortar 1:2 (1 white cement: 2 marble dust). Cement mortar 1:5 (1 cement: 5 marble dust). White cement mortar 1:3 (1 white cement: 3 marble dust). White cement mortar 1:5 (1 white cement: 5 marble dust). Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-25 – Grade concrete M-20 – Grade concrete M-15 – Grade concrete M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) With 40mm nominal size graded stone aggregate. M-15 - Grade concrete M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate With fly ash. 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M-25 – Grade concrete M 20 – Grade concrete M 15 – Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate With 40mm nominal size graded stone aggregate M-15 - Grade concrete M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. Above plinth: Columns, pillars, posts and struts. Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. M-25 (With 20mm nominal size graded stone aggregate) M-20 (With 20mm nominal size graded stone aggregate) M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : M-15 (With 20mm nominal size graded stone aggregate) M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. M-15 (With 20mm nominal size graded stone aggregate) M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Extra for concrete work in superstructure above floor two level for each floors or part thereof Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. All works up to plinth level: M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) All works above plinth and upto floor two level M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete M-15 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-20 Grade Concrete Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with M-20 Grade Concrete Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete Centering and shuttering in cluding strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. Above plinth upto 3.6 m height from plinth level Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. Suspended floors, roofs, landings, balconies and access platform. Shelves(Cast in situ) Lintels, beams, girders, bressumers and cantilevers Columns, P i l l a r s , Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral- Staircases. Spiral staircases (including landing). Arches, domes,vaults upto 6m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Coffer/waffle slab of any size or shape as shown in the drawing. Well steining Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. Cornices and mouldings Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including Edges. Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick 40 mm thick 25 mm thick Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars (CTD) Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints. Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 12 mm thick 25 mm thick 50 mm thick Providing and fixing sheet covering over expansion joints with iron screws as per design. Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 150mm wide. 200mm wide. 250mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide. 250 mm wide. Stainless steel Grade 304 plate-1.0 mm thick 150 mm wide. 200 mm wide. 250 mm wide. Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition Extra for laying reinforced cement concrete in or under foul positions. Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. All works upto plinth level. All works above plinth level and upto floor five level. Add extra for each floor for all works above floor five level. Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) All works upto plinth level. All works above plinth level and upto floor V level. Extra for each additional floor for all works above floor five level Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. Non pigmented wet curing compound Pigmented wet curing compound. Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. Frame 125 mmx 60 mm (double rebate) Frame 100mmx 60 mm (Single rebate) Frame 85mmx 60 mm (Single rebate) Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 12 mm thick 25 mm thick. 50 mm thick. Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 150mm wide 200mm wide 250mm wide Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap Floor Joint of 150 mm gap Floor Joint of 200 mm gap Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap Wall Joint of 150 mm gap Wall Joint of 200 mm gap Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) Roof Joint for 100 mm gap Roof Joint for 150 mm gap Roof Joint for 200 mm gap Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement:6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement: 6 sand). Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. Cement mortar 1:4 (1 cement : 4 sand) Cement Mortar 1:6 (1 cement : 6 sand) Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : Having 100 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 75 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Having 50 kg / cm2 average compressive strength. Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : Cement mortar 1:4 (1 cement : 4 sand) Cement mortar 1:6 (1 cement : 6 sand) Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1 cement : 4 sand) Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. Having 100 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Having 50 kg/cm2 average compressive strength. Cement mortar 1 : 3 (1 cement : 3 sand) Cement mortar 1 : 4 (1 cement : 4 sand) Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying brick work in or under foul position. Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. AAC Masonry in polymer modified mortar Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) From ground level upto plinth level Above plinth level upto floor II level Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : Cement mortar 1:6 (1 cement : 6 sand) Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1cement: 6 sand). Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof Extra for random rubble masonry with hard stone in : Square or rectangular pillars Circular pillars. Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. Cement mortar 1:6 (1 cement : 6 sand) Cement mortar 1:6 (1 cement : 6 sand) Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof Extra for coursed rubble masonry with hard stone (first or second sort) in : Square or rectangular pillars Circular pillars. Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. One face dressed Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone. Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. Red sand stone one face punched. Red sand stone both face punched White sand stone one face punched. White sand stone double face punched Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. Extra for plain ashlar or ashlar punched in : Square or rectangular pillars Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : Red sand stone White sand stone Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars Circular or polygonal pillars Extra for stone work sunk or moulded in cornices. Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - exposed face fine dressed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick 40 mm thick. 30 mm thick. Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: Red sand stone White sand stone 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone White sand stone Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. Red sand stone White sand stone Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 25mm thick Kota stone slabs exposed face dressed and rubbed. 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. Granite stone of any colour and shade Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) Red sand stone. White sand stone Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Sal wood Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Frame of size 100mmX60mm single or double rebate Frame of size 120mmX60mm double rebate. Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) Sal wood Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Extra for additional labour wood work in circular shape, such as in frames of fan light : Second class teak wood Sal wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 35 mm thick shutters 30 mm thick shutters Kiln seasoned selected planks of sheesham wood. 35 mm thick shutters 30 mm thick shutters Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 35 mm thick 30 mm thick Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood Kiln seasoned and chemically treated Haldu, Kail, Bija wood 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. Coir Veneer Board (conforming to IS 14842) 12 mm thick Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm) 5 mm thick glass pane (weight not less than 12.5 kg/sqm) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Haldu, Kail, Bija wood 35 mm thick 30 mm thick Kiln seasoned selected planks of sheesham wood. 35 mm thick 30 mm thick Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 30 mm thick shutters 35 mm thick shutters Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5 mm thick instead of 4 mm thick. 10 to 12 mm float glass 5.5 mm safety glass 10-12mm safety glass Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : Panelled or panelled and glazed shutters : Using ISI marked anodised aluminium butt hinges with necessary screws. Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick 18 mm thick Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick 25 mm thick Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square. Circular. Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 35 mm thick shutters 30 mm thick shutters Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 25 mm long 32 mm long 40 mm long 50 mm long 60 mm long Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 12 mm thick 18 mm thick 25 mm thick Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick 25 mm thick Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm 50 x 20 mm Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 50x12 mm 50x20 mm Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Non decorative veneer on both sides. Particle board with decorative veneering on both sides. Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 12 mm dia. 20 mm dia. 25 mm dia. Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 20 mm dia (heavy type) 25 mm dia (heavy type) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood. Haldu, Kail, Bija wood. Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm 125 mm 100 mm Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150 mm 125 mm 100 mm Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 300x20x6 mm 250x20x6 mm Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 125 mm 100 mm 75 mm Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 150 mm 115 mm 90 mm Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 400x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing bright finished brass door latch with necessary screws etc. complete. 300x16x5 mm 250x16x5 mm Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm 100 mm 75 mm Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 40 mm 50 mm 65 mm 75 mm Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 150 mm 115 mm 90 mm Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : Size 40 mm Size 50 mm Size 65 mm Size 75 mm Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 300x16mm 250x16mm Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 400X10mm 300x10mm 250x10mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 300x16x5mm 250x16x5mm Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 250x16 mm Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 400X10mm 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm 100 mm 75 mm Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper Twin rubber stopper Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing PTMT handles with necessary screws etc. complete. 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. Second class teak wood. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Kiln seasoned selected class of sheesham wood. Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62x19 mm. With 12 mm mild steel U beading. Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Triple strip vertical type. Double strip (horizontal type). Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 300mm long 450mm long 500mm long Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509. Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 1.0 mm thick. Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veneering on other side. With non decorative veneering on both sides. Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick. 18 mm thick. 25 mm thick. Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 18 mm thick 25 mm thick Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). Board 12 mm thick Board 18 mm thick Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 18 mm thick 25 mm thick Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. Wt. 8.20 kg/m2 Wt. 4.2 kg/m2 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 12mm thick commercial ply conforming to IS: 1328 BWR type. 18mm thick commercial ply conforming to IS: 1328 BWR type. Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. Using 8mm thick magnesia block Using10mm thick magnesia block Using12mm thick magnesia block Using12mm thick magnesia block Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: Extruded section Profile size 48x40 mm. Extruded section Profile size 42x50 mm. Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. Plain PVC door shutters. Pre laminated PVC door shutters. Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: Non decorative finish. Decorative finish (both side wood grained finish). Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) Single rebate (75 mm X 50 mm) Single rebate (100 mm X50 mm) Single or double rebate (125 mm X 65 mm) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick 25 mm thick Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick 12 mm thick Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. Non decorative finish (matt finish). Decorative finish (wood grained finish). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) Casement Window (Outward/Inward opening) with hinge System. Frame (50 mm x 50mm) Sash (Style and Rail) (62 mm x 34 mm) Mullion (intermediate Section) (66mm x 50 mm) ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) Glazing bead (12mm x 18mm) Casement Window (With friction hinge and outward opening) Casement Frame (67mm x 62mm) Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) Casement Glazing bead (35mm x 18 mm) Sliding Window (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding window Sash (60mm x 44mm) Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Sliding Door (Two Track, 2/4 Shutters) Two Track Sliding Frame (67mm x 52mm) Sliding Door Sash (80mm x 44mm) Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 200 x 19 x 1.9 mm 250 x 19 x 1.9 mm 300 x 19 x 1.9 mm 350 x 19 x 1.9 mm 400 x 19 x 1.9 mm Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 24 to 25 mm thick plain solid PVC flush door shutter 28 to 30 mm thick plain solid PVC flush door shutter Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 1mm thick laminated sheet 0.12 mm thick laminated sheet Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. Acrylic Solid Surface sheet – Glacier white designer white 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 6 mm thick sheet 12 mm thick sheet Acrylic Solid Surface sheet - Any other 6 mm thick sheet 12 mm thick sheet Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6mm for diagonal braces Using flats 30x6mm for diagonal braces and central cross piece. Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area. Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). Providing and fixing ball bearing for rolling shutters. Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: Profile B of 1.60mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.60mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.60mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile B of 1.25mm thick single rebate of size 80mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile C of 1.25mm thick single rebate of size 100mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Profile E of 1.25mm thick double rebate of size 115mmx50mm Fixing with adjustable lugs with split end tail to each jamb. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Hot finished seamless type tubes Electric resistance or induction butt welded tubes. Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. M.S. tube. E.R.W. tubes. Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10x60 mm 10x80 mm 10x120 mm 10x140 mm 10x160mm Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes With 5.50 mm thick glass panes With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. Add extra for providing and fixing froasted glass instead of float glass. With 4.0 mm thick glass panes. With 5.5 mm thick glass panes. Supplying at site: R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) Made of G.I. wire. Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Openable window Fixed windows Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. Openable single rebate window Fixed single rebate window Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. Openable double rebate window Fixed double rebate window Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement. Medium shades pigment using 50% white cement and 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : Light shade pigment using white cement. Medium shade pigment using 50% white cement, 50% ordinary cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Light shade pigment using white cement. Medium shade pigment using 50% white cement 50% Grey cement. Dark shade pigment using ordinary cement. Ordinary cement without any pigment. Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) Makrana white second quality. Raj Nagar plain. Agaria White/Morgarh Katni marble Black Zebra. Udaipur / Baroda green marble Pink plain marble. Jaisalmer Yellow Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black Granite fine grained dark crystal of other colours and various patterns Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Granite grey/pink/brown with various patterns Cuddpah stone Extra for prefinished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. Extra for prefinished grooves to treads of steps of granite stone Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Italian marble flooring in required design and patterns Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of slab over 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Area of slab upto 0.50 sqm Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter Gray/Pink/Brown or equivalent with various patterns Deduct for not polishing granite flooring (item no 11.29 & 11.30) Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, Flamed Finish Polish Leather Finish Polish Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 10-12 mm thick 20 mm thick Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Granite work. Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. Red sand stone White sand stone Grey lime stone Kota stone 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone White sand stone 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar Red sand stone White sand stone Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. Granite tile of any colour /shade Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Gunmetal cramps. Stainless steel cramps. Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. White Agaria Marble Stone. Granite Stone of approved shade. Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH) 450 mm Finished Floor Height (FFH). Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 1 mm thick 2 mm thick 3 mm thick Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 100 mm thick 200mm thick Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-35 grade 60 mm thick C.C. paver block of M-30 grade Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. Granite Door frame for 100mm thick wall Thickness. Granite Door frame for 200mm thick wall Thickness. Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Plain ivory light shade : Size 600X600mm thickness 9-10mm Dark shade (terracotta) : Size 600X600mm thickness 9-10mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm In dark shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm In dark shade glossy/rustic/stain finished (a) Size 600X600 mm thickness 9-10 mm (b) Size 800X800mm thickness 11-12mm (c) Size 800X1200 mm thickness 11-12mm Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) In dark colour and shade etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light colour and shades as ivory, beige blanco, grey etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm In dark colour and shades etc. (a) Size 300X300 mm thickness 9-10 mm (b) Size 600X600mm thickness 9-10mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 800X1600 mm thickness 11-12mm Size 1000X1000 mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Size 1200X1200 mm thickness 11-12mm Size 1200X1800 mm thickness 11-12mm Size 1200X2400 mm thickness 11-12mm For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades Size 600X600 mm thickness 9-10 mm Size 800X800mm thickness 11-12mm Size 600X1200 mm thickness 11-12mm Size 800X1200 mm thickness 11-12mm Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). Area of tiles not less 0.18 sqm Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Course granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area of tiles not less 0.18 sqm Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns Gray/Pink/Brown with various patterns Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 300x300mm 400x400mm 600x600mm Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 0.80mm thick with zinc coating not less than 275gm/m² 0.63 mm thick with zinc coating not less than 275gm/m² Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 0.63mm thick with zinc coating not less than 275gm/m² Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: Corrugated apron pieces Eaves filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm) Crimp curve Gutter. (600 mm over all girth) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 2mm thick flat. Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 10mm thick 16mm thick Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : Red sand stone slab White sand stone slab : Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm diameter 150 mm diameter Providing and fixing ISI marked sand cast iron rain water pipes. 100 mm dia minimum wall thickness 5mm 150 mm dia minimum wall thickness 5mm Providing lead caulked joints to sand cast iron rain water pipes and fittings : 100 mm dia. Pipe 150 mm dia. Pipe Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : Sand cast iron bend : 100 mm diameter 150 mm diameter Sand cast iron plain shoes : 100 mm diameter 150 mm diameter Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter (minimum wall thickness 1.8mm) 110 mm diameter (minimum wall thickness 2.2mm) Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single push fit Coupler : 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Single tee with door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Single tee without door 75x75x75 mm (minimum wall thickness 1.8mm) 110x110x110 mm (minimum wall thickness 2.2mm) Bend 87.5° 75 mm bend (minimum wall thickness 1.8mm) 110 mm bend (minimum wall thickness 2.2mm) Shoe (Plain) 75 mm Shoe (minimum wall thickness 1.8mm) 110 mm Shoe (minimum wall thickness 2.2mm) Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm (minimum wall thickness 1.8mm) 110 mm (minimum wall thickness 2.2mm) Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) Stone ware spout Upvc spout (Pipe dia.110 mm) Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. Base metal thickness 0.8mm up to span 15 meter Base metal thickness 0.9mm , up to span 18 meter Base metal thickness 1.0 mm, up to span 21 meter Base metal thickness 1.1 mm, up to span 23 meter Base metal thickness 1.2mm, up to span 25meter Base metal thickness 1.3 mm, up to span 27 meter Base metal thickness 1.4mm, up to span 29meter Base metal thickness 1.5 mm, up to span 31 meter Base metal thickness 1.6 mm, up to span 33 meter Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick. Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board Flat surfaces Curved surfaces Sunk or raised mouldings Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) Gypsum moisture resistant board. Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12mm thick insulating board Natural colour insulating board White face insulating board Flame retardant face insulating board Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). costing upto 70/- per metre, Rs 70- 150 per meter Upto 200 per meter Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. Standard White / Natural Satin Shade Wooden Finish Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. Tile of 600 mm wide ,600 mm long and 0.5 mm thick Plank of 600mm wide ,1200 mm long and 0.6mm thick Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric With precontraint tensile membrane 1050 GSM (20 years Warranty) With precontraint tensile membrane 1050 GSM (15 Years warranty) 12 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 20 mm cement plaster of mix : 1:4 (1 cement : 4 sand) 1:6 (1 cement : 6 sand) 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 1:4 (1 cement : 4 sand) 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Extra for plastering Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof Extra for plastering on circular work not exceeding 6 m in radius: In one coat In two coats Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat In two coats Extra for plastering Spherical, Groined ceiling, Flewing soffits. Spherical ceiling Groined ceiling Flewing soffits Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : Flush Band Sunk Band Raised Band Moulded Band 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): Flush Band Sunk Band Raised Band Moulded Band 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing Sunk pointing Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). Flush/ Ruled pointing Raised and cut pointing Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. size 1200mmx1800mm size 1200mmx2400mm size 1200mmx3000mm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. Extra for lining out plaster to imitate stone or concrete blocks walling. Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. White washing with lime to give an even shade: New work (three or more coats) Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat. Two coats. Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coat Two coats Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work On concrete work Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat. Two coats. Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. French spirit polishing: Two or more coats on new works including a coat of wood filler. Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture. Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 0.8-1.2mm thickness 2.0-2.5mm thickness Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 6 mm thick plaster for internal walls 8 mm thick plaster for external walls exposed to weather. Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) ACP sheet 2mm thick ACP sheet 3mm thick ACP sheet 4mm thick Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) PVC foam sheet 3.0 mm thick PVC foam sheet 5.0 mm thick PVC foam sheet 8.0 mm thick Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats Window chowkhats Clerestory window chowkhats Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes with now wooden fillets wherever necessary: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Renewing glass panes and refixing existing wooden fillets: Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets Haldu/Bija/Kail wood fillets. Renewal of old putty of glass panes (length). Refixing old glass panes with putty and nails. Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : Red/ white sand stone slabs 30 to 50 mm thick. Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Sal wood battens. Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : Not exceeding 4.00 metres in length. Sal wood beams Haldu/Bija/Kail wood fillets. Above 4.00 metres and upto 5.00 metres length. Sal wood beams Haldu/Bija/Kail wood fillets. Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia. and below. Wheel above 50 mm dia. Providing and fixing 25 mm thick shutters for cupboard etc. : Panelled or panelled and glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: Second class teak wood. Hard wood, finger jointed Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. 25 mm diameter. Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: Sal wood. Haldu/Bija/Kail wood. White washing with lime old work to give an even shade : two or more coats one or more coats Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. French spirit polishing: One or more coats on old work. Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor One or more coats on old work. Polishing on wood work with readymade wax polish of approved brand and manufacture : Old work Re-lettering with black Japan paint of approved brand and manufacture. Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 32 mm dia 40 mm dia Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Old work (one or more coats @ 2.20 kg/10 sqm) complete. Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : One or more coats applied on walls @ 0.85 ltr/10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish. One or more coats with spar varnish. Melamine polishing on wood work (one or more coat). Old work Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. Rough chiseled dressed stone Fine dressed stone Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). Colour washing with lime to give an even shade: (one or more coats) (two or more coats) Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 8 mm dia bar 10 mm dia hole 10 mm dia bar 12 mm dia hole 12 mm dia bar 16 mm dia hole 16 mm dia bar 20 mm dia hole 20 mm dia bar 25 mm dia hole 25 mm dia bar 32 mm dia hole 32 mm dia bar 40 mm dia hole Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type) Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter Bars above 12 mm diameter Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In lime mortar with old mughal bricks. In lime mortar. In cement mortar. Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : From brick work in lime mortar. From brick work in cement mortar. Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: In lime mortar. In cement mortar. Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: In lime mortar. In cement mortar. Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : In lime mortar. In cement mortar. Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. For thickness of tiles above 25 mm and upto 40 mm. Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. Of area beyond 3 sq. metres. Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : Of sectional area below 40 square centimetres. Of sectional area 40 square centimetres and above. Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists Channels, angles, tees and flats Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re- erected. Removal of old Tarfelt i/c disposal as directed by Engineer in charge. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet Asbestos/ Non asbestors sheet Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe R.C.C. Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Upto 10 mm thick Thickness above 10 mm upto 25 mm Thickness above 25 mm upto 40 mm Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: Thickness upto 40 mm Thickness above 40 mm upto 75 mm Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15 mm to 40 mm nominal bore Above 40 mm nominal bore Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: Upto 150 mm diameter Above 150 mm dia upto 300 mm dia. Above 300 mm diameter Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Upto 150 mm diameter Above 150 mm diameter Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 100 mm diameter 150 mm diameter 200 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 440 mm diameter Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep. Rectangular arch type manhole 140x90cm and 2.45m deep. Circular manhole 122 cm diameter and 1.68 m deep Extra for depth of manholes dismantled: Rectangular manhole 90x80 cm and beyond 45 cm depth. Rectangular manhole 120x90 cm and beyond 90 cm depth. Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : Water bound macadam road Bituminous road Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : Up to 600 mm diameter Above 600 mm diameter Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge Up to 150 mm diameter Above 150 mm diameter Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. Kitchen sink without drain board 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : Size450x300x150mm Size600x450x200mm Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 250x130x30 mm 250x125x25 mm Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity White coloured Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) White Coloured Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White Black Coloured (other than black and white) Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm. Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm. Size 600x450x200 mm. Providing and fixing soil, waste and vent pipes: Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 75 mm dia with wall thickness of 5 mm 100 mm dia with wall thickness of 5 mm Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 4 mm 150mm dia with wall thickness of 5mm Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 75 mm dia with wall thickness of 3.5 mm 100 mm dia with wall thickness of 3.5mm 150mm dia with wall thickness of 4 mm Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe 100 mm dia pipe Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe For 100 mm dia pipe For 150 mm dia pipe Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing plain bend of required degree. 150 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 100 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 4 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 75 mm dia Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm dia Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 150X150X150X150 Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75x75mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double equal plain junction of required degree. 150X150X150X150 mm Sand cast iron as per IS - 3989 100x100x100x100mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain junction of required degree : 150X150X150 mm Spun cast iron as per IS - 3989 100x100x100 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm Sand cast iron as per IS – 1729 Spun cast iron as per IS – 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double equal plain invert branch of required degree: 100x100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single equal plain invert branch of required degree: 100x100x100 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 75x75x75 mm Sand cast iron as per IS - 1729 Sand cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness Providing and fixing sand cast iron S&S off sets as per IS: 1729 76 mm off sets With 75 mm dia pipe With 100 mm dia pipe 114 mm off sets With 75 mm dia pipe With 100 mm dia pipe 152 mm off sets With 75 mm dia pipe With 100 mm dia pipe Providing and fixing sand cast iron S&S off sets as per IS: 3989. 75 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe 150 mm off sets With 75 mm dia pipe With 100 mm dia pipe With 150 mm dia pipe Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Providing and fixing terminal guard: 150mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 100 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS-15905 75 mm Sand cast iron as per IS - 1729 Spun cast iron as per IS - 3989 Hubless cast(spun) iron as per IS- 15905 Providing and fixing collar: 100 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS - 3989 75 mm Sand cast iron S & S as per IS - 1729 Sand cast iron S & S as per IS- 3989 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 150mm 100 mm 75 mm Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm dia 75 mm dia Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S & S as per IS: 3989. Sand Cast iron S & S as per IS: 1729. Hubless cast(spun) iron as per IS-15905 100 mm inlet and 75 mm outlet Sand cast iron S & S as per IS - 3989 Spun Cast iron S & S as per IS- 1729. Hubless cast(spun) iron as per IS- 15905 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 75 mm diameter 110 mm diameter Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm 110 mm Single pushfit Coupler 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.50 75 mm bend 110 mm bend Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 75 mm 110 mm Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 100 mm dia 75 mm dia 50 mm dia Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe (only in residential & complaxes) 32 mm dia 40 mm dia Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Circular shape 450mm dia. Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder: C.P. brass Vitreous china Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. Waste coupling 31mm of 79mm length and 62mm breadth Waste coupling 38mm of 83mm length and 77mm breadth Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. Providing and fixing CP brass towel rail of approved quality and make 600x20mm 450x20mm Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring Providing and fixing CP brass soap dish of approved quality and make Providing and fixing CP brass Urinal spreader of approved quality and make Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 100 mm dia. Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 75 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 100 mm dia half round pipe 150 mm dia half round pipe 200mm dia half round pipe Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 For ground floor buildings. For Ground floor & Ist floor buildings. Add extra for every additional floor above Ist floor. Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia Pipes. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 15 mm nominal outer dia Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia Pipes. Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 15 mm dia nominal bore 20 mm dia nominal bore External work : including trenching and refilling etc. 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 15.88 mm outer diapipe 22.22 mm outer diapipe 28.58 mm outer diapipe 34.00 mm outer dia Pipe 42.70 mm outer dia Pipe 48.60 mm outer dia Pipe Internal work - Concealed Pipe 15.88 mm outer dia .Pipes. 22.22 mm Outer diaPipes Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : With C.I. wheel of approved quality (screwed end) 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore With brass lever handle of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- With common burnt clay bricks of 25 kg /sqcm compressive strength. With well burnt flyash bricks of 50 kg/sqm compressive strength. Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50 kg/cm2 strength Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg/cm2 compressive strength. With flyash bricks of 50kg/cm2 strength. Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay bricks of 25 kg /sqcm compressive strength. With flyash bricks of 50kg/sqm compressive strength. Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and filling sand all-round the G.I. pipes in external work. 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore 32 mm nominal bore 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Providing and fixing brass bib cock of approved quality 15 mm nominal bore 20 mm nominal bore Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20 mm nominal bore Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 150 mm diameter 200 mm diameter Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 86 mm long weighing not less than 88 gm 122 mm long weighing not less than 99 gm 165mm long weighing not less than 110 gm 90mm long weighing not less than 93 gm Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long weighing not less than 46 gms. Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 30cm length. 45 cm length. Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore.Weighing not less than 32 gms. 20mm nominal bore.Weighing not less than 40gms. 25mm nominal bore.Weighing not less than 62 gms. Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm nominal bore 100 mm nominal bore 150 mm nominal bore 200 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore 50 to 80 mm nominal bore Providing and fixing CP jet assembly to including connection etc complete. Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. Add extra for additional floor lift beyond 5.0M.height. Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 110 mm diameter OD (min. wall thickness 3.2mm) 160 mm diameter OD (min. wall thickness 4.0mm) 200 mm diameter OD (min. wall thickness 4.9mm) 250 mm diameter OD (min. wall thickness 6.2mm) 300 mm diameter OD (min. wall thickness 7.7mm) Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. pipe 300 mm diameter PVC pipe Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 110 mm diameter PVC. pipe 160 mm diameter PVC. pipe 200 mm diameter PVC. pipe 250 mm diameter PVC. Pipe 300 mm diameter PVC pipe Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With well burnt bricks With sewer bricks conforming to IS : 4885 180x150 mm size P type With well burnt bricks With Sewer bricks conforming to IS : 4885 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra for depth for manholes Size 90x80 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Size 120x90 cm With well burnt bricks With Sewer bricks conforming to IS : 4885 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming to IS : 4885 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With well burnt bricks With Sewer bricks conforming IS : 4885 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With well burnt bricks With Sewer bricks conforming IS : 4885 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar With 20 mm diameter round bar Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): With 20x20 mm square bar With 20 mm diameter round bar Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Light duty D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter Medium duty - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter Heavy duty D - 20 Circular shape 560 mm internal diameter Extra Heavy Duty - 35 Circular shape 560 mm internal dia. Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With well burnt bricks With fly ash bricks 100 key/cm2 strangth Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With well burnt bricks With fly ash bricks 100 kg/cm2 strength Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With well burnt bricks Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 100 mm dia 150 mm dia Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 100 mm dia. Half round R.C.C. pipe 150 mm dia. Half round R.C.C. pipe 250 mm dia. Half round R.C.C. pipe 300 mm dia. Half round R.C.C. pipe Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement Deduct for not providing and installing FRP/GRP manhole cover size 900mmx450mm (weight of cover 43.76kg ± 10%) 450mmx600mm (weight of cover 14.2kg ± 10%) 300mmx300mm (weight of cover 4.1kg ± 10%) 600mm (weight of cover 41.78kg ± 10%) 500mm (weight of cover 43.1kg ± 10%) Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 100 mm dia to 110 mm dia 150 mm dia to 160 mm dia 200 mm dia 250 mm dia 300 mm dia Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Deduct for not providing EDPM rubber/neoprene gasket all around. Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Add extra for providing and fixing froasted glass instead of float glass With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With stainless steel cover plate - minimum 1.25 mm thickness With brass cover plate - minimum 1.25 mm thickness. Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Anodized (AC15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge Anodized (AC15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. Extra for froasted glass (with eching film) in item No. 21.22 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) Serrated with central bulb (225mm wide, 8- 11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 sand) Cement mortar 1:4 (1cement : 4 sand) Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm For horizontal surface one coat @1.10 kg per sqm. Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. Providing and fixing insulation with resin bonded Glass wool Providing and fixing insulation with resin bonded Rock wool Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter. (600 mm over all girth). Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. Extra for every additional height of 0.3 m up to height of wall 3 m Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) Upto 1 Hectare 1 Hectare to 2 Hectare Add extra for each additional one Hectare or part there off Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. Up to 100km (both way) Add extra for distance beyond 100km and upto 150km. (both way) Add extra for every additional km beyond 150km (both way) Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. First time design work Built up area upto 500 sqm Built up area more than 500 sqm and upto 3000 sqm Built up area more than 3000 sqm. Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) Plinth area upto 500 sqm Plinth area more than 500 sqm and upto 3000 sqm Plinth area more than 3000 sqm Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Jul 23, 2024 Contract Value : ₹ 50.00 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
42.
Defence #3680118 AOC
Repair / Maintenance And Replacement Of Fire Alarm System, Smoke Detectors And Connected Work At Various Otm At Camero Of Age E / M-Ii And Repair And Maintenance Of Internal Electric Supply Including Certain Allied Works Of Afro & Afcao, Csdo And Dit Under Ge ( Af ) Subroto Park; 1 M&L For Comprehensive Maintenance And Repairs / Rectification Of Deffects By Electrically And Technicallyby Checking All Indicators, Smps, Mother Board, Card , Electrical Connections And Replacement Of Faulty Service Parts Of Complete With Wire Or Wireless Fire Alarm System Of Any Make And Model Installed In Variours Otm Bldg & Map Md Accn Of Camero Areaall As Specified And As Directed By Engineer-In-Charge. 2 Note For Item No 1Above :- All Defective Part Which Are Required To Replace Shall Be Measured And Paid Seperately Under Respective Items As Supply Only ( A ) Fire Alarm Control Panel : The Functions Of Controls Panel And Indicating Equipmentwill Be Checked By The Operation Of A Trigger Device In Each Zone. All Fault Indicator And Their Circuits Will Be Checked By Stimulation Of Fault Conditions Of Any Type Fie Alarm Panel. ( B ) Heat Detector : Heat Detectors Will Be Tested By Aim A Heat Lamp, Blow-Dryer, Or Heat Gun At The Heat Detector. The Detector Alarms Should Sound Within Three Or Four Seconds After Apply The Heat Source. ( C ) Smoke Detector : Smoke Detector Will Be Cleaned Periodically So As To Remove Dust Or Dirt That Accumulates On Them Due To Local Ambient Conditions At Least Each Detector Is Cleaned Once In Month. Smokedetectors Will Be Tested By Apply A Small Spray Of Smoke Detector Test Aerosol. The Detector Alarms Should Sound Within Three Or Four Seconds After Apply The Heat Source. 3 ( D ) Manual Call Point Hooters : All Manual Call Points Will Be Operated Once A Monthly By Removing Glass Or By Actual Breaking Of Glass So As To Ensure That System Is Capable Of Operation Under Alarm Conditions And All Hooters Give Proper Sound ( E ) Response Indicators : All Detectors Which Are Placed In Side A Cabin Of Room Will Be Tested By Initiating The Particular Detector So As To Ensure The Proper Working Of Response Indicator ( F ) Wiring & Cables : A Visual Inspection Will Be Made So That Structure Or Occupancy Changes Does Not Damage Cables And Sitting Of Trigger Devices ( Manual Call Points Smoke Detector And Heat Detector. ( G ) Monthly Log Sheet Will Be Maintained For Monthly Inspection And Testing : Monthly Inspection And Testing Will Be Done In The Monthly Maintained Log Sheet. Log Sheet Will Be Produced To The Engineer-In-Charge Duly Complted On Ist Day Of Every Month. 4 Note :- ( A ) Replacement Of Parts Will Be Measured And Paid Seperately. ( B ) If Service Is Not Carried Out By The Contractor On Due Date Rs 1000.00 Per Day For Each Service Recovery Will Be Made. ( C ) Contractor Will Provide One Technician And One Helper From 0900 To 1700 Hrs In All Working Days For Day To Day Services. ( D ) The Maint Shall Be Carried Out Through Manufacturer Representative Or His Authorised Rep. 5 Supply, Installation, Testing And Commissioning In Replacement Of Intelligent Analog Addressable Muliticriteriatype Detector Complete With Dual Led, Hard Addressable Having Rotary Decade Address Swicthes From 01-99, Complete With Mounting Base Complete As Required Conforming To Bs 5839 Standards And Duly Approved By En54 / Lpcb / / Ul Complete All As Specified And Directed By Engineer-In-Charge. 6 Supply, Installation, Testing And Commissioning In Replacement Of Fault Isolator With Base With Termination Preferably After Every 20–30 Devices And Shall Be Able To Isolate Electrical Short Circuit In The Wiring Etc. As Required Complete All As Specified And Directed By Engineer-In-Charge. 7 Supply, Installation, Testing And Commissioning In Replacement Of Intelligent Analog Addressable Type Manual Call Point Having Surface Or Flush Mounting Option Fully Complaint To En54 Having Rotary Decade Swicthes For Addressing From 01-99 Complete With Back Box For Mounting Complete As Required Conforming To Bs5839 Standards And Duly Approved By En54 / Lpcb / Vds / Ul / Bsa Complete All As Specified And Directed By Engineer-In-Charge. 8 Supply, Installation, Testing And Commissioning In Replacement Of Response Indicators For Getting Fire Indications Of Detectors Installed Above False Ceiling Area Interconnecting To Loop Cable Complete All As Specified And Directed By Engineer-In-Charge. 9 Supply, Installation, Testing And Commissioning In Replacement Of Intelligent Analog Addressable Type Control / Output Modules Having Option Of Rail Or Surface Mounting With Tri Colour Led Status Indicator With Built In Short Circuit Isolators Having Visible Rotary Decade Address Swicthes From 01-99, For Initiating Hooter / Sounder / Strobes Etc Dully Approved To Gea Ge1-082Conforming To Bs5839 Standards And Duly Approved By En54 / Lpcb / Vds / Ul / Bsa Complete All As Specified And Directed By Engineer-In-Charge. 10 Supply, Installation, Testing And Commissioning In Replacement Of Intelligent Analog Addressable Type Monitor Modules Having Option Of Rail Or Surface Mounting With Tri Colour Led Status Indicator With Built In Short Circuit Isolators Having Visible Rotary Decade Address Swicthes From 01-99 Dully Approved To Gea Ge1-082 Conforming To Bs5839 Standards And Duly Approved By En54 / Lpcb / Vds / Ul / Bsa Complete All As Specified And Directed By Engineer-In-Charge. 11 Supply, Installation, Testing And Commissioning In Replacement Of Analog Addressable Type Active / Passive Repeater Fire Alarm Panel With Backlit Lcd Display, Having Controls For Reset, Mute, Accept , Silence Alarms And Self Test Conforming To Bs5839 Standards And Duly Approved By En54 / Lpcb / Vds / Ul / Bsa Complete All As Specified And Directed By Engineer-In-Charge. 12 Supply, Installation, Testing And Commissioning In Replacement Of Addressable Type Loop Powered Hooter Cum Strobe Complete With Mounting Base As Required Conforming To Bs5839 Standards And Duly Approved By En54 / Lpcb / Vds / Ul / Bsa Complete All As Specified And Directed By Engineer-In-Charge. 13 Supply, Installation, Testing & Commissioning In Replacement Of 5 Loop Micro Processor Based 2 Wire Fault Tolerant Loop, Required Loop Networkable Type ( Each Loop Accessing Maximum 99 Detectors And 99 Modules ) Fire Alarm / Detection Control Panel. The Panel Shall Be Able To Give Location Of All Fire / Fault Conditions Of Addressable Units Via The Address Codes. Further, The Panel Must Be Able To Automatically Switch On / Offrespective Control Module When Ever Any Alarm Is Triggered. The Panel Shall Have Rectifier, Loop Cards, 80 Character L C D Unit To Indicate Fire / Fault Signal With Address And Analog Output, External / Inbuilt Printer To Log All Fire Or Fault Events Complete In All Respects.The Panel Shallbe Sheet Steel Painted, Selaed To Ip30. The Panel Shall Have 20 Zones With Individual Led Indicators, Expandable To 80 Led Indicators. The Panel Shall Have 3 Serial Ports. The Panel Shall Have A Built In Power Supply And Battery Charger Along With Maintenance Free 24 Ah, 2 X 12 Volt Smf Lead Acid Batteries Capable Of Running For A Minimum Of 24 Hours With Battery Charger Complete As Required.And As Per Specifications. Conforming To Bs5839 Standards And Duly Approved By En54 / Lpcb / Vds / Ul / Bsa Complete All As Specified And Directed By Engineer-In-Charge. 14 Supply & Fix In Replacement Of4X4 Ms Junction Box For Detector Mounting Complete All As Specified And Directed By Engineer In Charge. 15 Supply & Fix In Replacement Ofbattery Maintenance Free 6 Volt 7 Ah Complete All As Specified And Directed By Engineer In Charge. 16 Supply & Fix In Replacementofzone Card For Fire Alarm Panel Complete All As Specified And As Directed By Engineer-In-Charge 17 Supplying, Drawing, Connecting, Testing & Commissioning In Replacement Of 2Core, 1.5 Sq. Mm. Stranded Copper Conductor, Pvc Insulated Pvc Sheathed, Aluminium Myler Tape Shielded Frls Wire In Existing Conduit Complete All As Specified And Directed By Engineer-In-Charge. ( For Fire Detection & Alarm System ) 18 Supply And Laying In Position In Replacement Of The Following Sizes Of 25 / 20Mm Dia Pvc. Conduits Including Providing All Accessories Complete All As Specified And Directed By Engineer-In-Charge. ( For Fire Detection ) 19 S & F In Replacement Of Loop Driver Card Suitable For Fire Alarm / Detection Control Panel Complete All As Specified And Directed By Engineer-In-Charge. 20 S & F In Replacement Of Rs 485 Communication Module Complete All As Specified And Directed By Engineer-In-Charge. 21 S & F In Replacement Of Internal Printer Module Complete All As Specified And Directed By Engineer-In-Charge. 22 S & F In Replacement Of Modbus Tcp / Ip Interface Module. Requires An Rs485 Card To Be Fitted In The Control Panel & Mi-Rj-45 Cable Complete All As Specified And Directed By Engineer-In-Charge. 23 Supply And Fixing In Replacement Of Photoelectric Smoke Detector Detects The Smoke By A Couple Of Infrared Diodes. The Principle Of Detection Isgranule In The Smoke Can Re Act Infrared Light. In Orderto Reduce The Interference And Lower Power Consumption, The Emitting Circuit Adopts The Pulse Signal. Theproduct In Accordance With The Networking Approach Is Divided Into 2-Wire And 4-Wire Detectors Complete All As Specified And Directed By Engineer-In-Charge. 24 Supply And Fixing In Replacement Of Sitc Red Conventional Call Point With Led And Resistor 470 Ohm Flush Mounting Flexi Element Complete All As Specified And Directed By Engr-In-Charge. 25 Supply And Fixing In Replacement Of Sitc Conventional Hooter Cum Strobe Flush Mounting Flexi Element Complete All As Specified And Directed By Engr-In-Charge. 26 Supply, Installation, Testing & Commissioning In Replacement Of 2 Loop Micro Processor Based 2 Wire Fault Tolerant Loop, Required Loop Networkable Type ( Each Loop Accessing Maximum 99 Detectors And 99 Modules ) Fire Alarm / Detection Control Panel. The Panel Shall Be Able To Give Location Of All Fire / Fault Conditions Of Addressable Units Via The Address Codes. Further, The Panel Must Be Able To Automatically Switch On / Offrespective Control Module When Ever Any Alarm Is Triggered. The Panel Shall Have Rectifier, Loop Cards, 80 Character L C D Unit To Indicate Fire / Fault Signal With Address And Analog Output, External / Inbuilt Printer To Log All Fire Or Fault Events Complete In All Respects.The Panel Shallbe Sheet Steel Painted, Selaed To Ip30. The Panel Shall Have 20 Zones With Individual Led Indicators, Expandable To 80 Led Indicators. The Panel Shall Have 3 Serial Ports. The Panel Shall Have A Built In Power Supply And Battery Charger Along With Maintenance Free 24 Ah, 2 X 12 Volt Smf Lead Acid Batteries Capable Of Running For A Minimum Of 24 Hours With Battery Charger Complete As Required.And As Per Specifications. Conforming To Bs5839 Standards And Duly Approved By En54 / Lpcb / Vds / Ul / Bsa Complete All As Specified And Directed By Engineer-In-Charge. 27 M & L For Charges For Attending And Rectifying The Door Sensor Minor Complaints ( Control Panels, Motor And All Electrical Complaints ) As And When Required For Smooth Operation Of Door Sensor As When Required To Be Replace Unsvfollowing Spare Parts After Replacement Testing Shall Be Carried Out As Directed By Engineer-In-Chargenote :- Following Spare Parts Shall Be Measured And Paid Separately 28 Supply And Fix In Replacement Of Radar Xl-C 4102 A For Door Sensor For One Door Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Itemsall As Specified And Directed By Engr - In - Charge 29 Supply And Fix In Replacement Of Control Unit Assembly Xl-C 4106 For Door Sensor For One / Two Door Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items All As Specified And Directed By Engr - In - Charge 30 Supply And Fix In Replacement Of Motor Assembly For 4100 Of Xl-C 4107 For Door Sensor For One / Twodoor Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items All As Specified And Directed By Engr - In - Charge 31 Supply And Fix In Replacement Of Torroidal Transformer Xl-C 4108 For Door Sensor For One Door Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items All As Specified And Directed By Engr - In - Charge 32 Supply And Fix In Replacement Of Main Roller Assembly For 4100 Ofxl-C 4109 For Door Sensor For One Door Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items With Proper Screwes And Nut Bolt All As Specified And Directed By Engr - In - Charge 33 Supply And Fix In Replacement Of Counter Roller Assembly For 4100 Ofxl-C 4110 For Door Sensor For One Door Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items With Proper Screwes And Nut Bolt All As Specified And Directed By Engr - In - Charge 34 Supply And Fix In Replacement Of Encoder Cable 450Mm Xl-C 4111 For Door Sensor Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items With Proper Clamps And Securing All As Specified And Directed By Engr - In - Charge 35 Supply And Fix In Replacement Of Five Position Prog Switchxl-C 4112 For Door Sensor Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items With Proper Screwes And Nut Boltall As Specified And Directed By Engr - In - Charge 36 Supply And Fix In Replacement Of Light Barrier For 4100 Of Xl-C 4113 For Door Sensorincluding Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items With Proper Screwes And Nut Bolt All As Specified And Directed By Engr - In - Charge 37 Supply And Fix In Replacement Of Timer Belt, Fixing Accessaries Of Xl-C 4117 For Door Sensor Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items With Proper Screwes And Nut Boltall As Specified And Directed By Engr - In - Charge 38 Supply And Fix In Replacement Of Carrier Head Assembly Of Xl-C 4119 For Door Sensor Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items With Proper Screwes And Nut Boltall As Specified And Directed By Engr - In - Charge 39 Supply And Fix In Replacement Of Floor Guide For Framed Aluminium Doorfor Door Sensor Including Taking Down Unsv Parts And Fixing New Parts In Same Position Without Damaged Other Items With Proper Screwes And Nut Boltall As Specified And Directed By Engr - In - Charge 40 Taking Down Carefully Copper / Aluminium Point Wiring ( Light , Fan, Socket Or Power ) Complete, Fitting Such As Switches, Ceiling Roses, Pendents, Regulators, Sockets Etc.Removing Materials To Store For Keeping In Safe Costudy Or For Taking Credit ( Credit For Above Items Should Be Made As Per Conditioned Separately ) And Making Good Disturbed Surface Of Walls, Floors Etc.Complete All As Specified And Directed By Engineer-In-Charge. 41 M&L For Point Wiring With Single Core Of Frls Pvc Insulated Unsheathed Isi Marked 1100 V Grade Cable Multi Stranded Copper Conductor Of Size 1.5 Sqmm Drawing Through In And Including Pvc Conduit Size Of Not Less Than 20 Mm Including Conduit Fittings And Accessories Concealed In Wall / Ceiling Wiring On Ceiling / Wall Terminated In Flush Metal Box Alongwith Outer Cover Plate For Mounting Modular / Piano Switch, Socket And Electronic Regulator Along With Provn Ofearth Wire Of Pvc Insulated, Unseathed, 1100 V Grade Cable Multi Stranded Frls Isi Markedcopper Conductor Of Size 1.5 Sqmm All Asspecified And Directed By Engr-In-Charge. For One Light Point Controlled By One Switch One Way. 42 All As Per Srl Item38 Above But For One Ceiling Fan / Exhaust Fan Point Controlled By One Switch Regulator. 43 All As Per Item No 38 Above But For One 3 Pin 5 Amps Socket Outlet On Indipendent Board With Other Switchs. 44 All As Per Item No 38 Above But For One 3 Pin 5 Amps Socket Outlet On The Same Board With Other Switchs. 45 All As Per Item No 38 Above But For One Light Point Controlled By Two Way Switches. 46 All As Per Item No 38 Above But For Call Bell Controled By One Push Button In Indipendent Board . 47 All As Per Item No 38 Above But With 2.5 Sq Mm Cable For Independent One 3 Pin 15 Amps Socket Outlet In And Including S / C 2.5 Sq Mm Pvc Insulated Copper Conductor Unsheathed 1100 V Grade Is -694 Fr Cable For Continuous Earth Wire. 48 M&L For Point Wiring For One Light Fitting / One Fan Point Controled By One Switch With 1.5 Sq Mm Pvc Insulated Copper Conductor Cable Drawing In And Including Pvc Casing / Capping Or Surface Conduit With 1.5 Sq Mm Pvc Insulated Copper Conductor Cable For Continuous Earth Wire Connected To Main Earth Dolly With 3Mm Thick Plastic Laminated Sheet Cover Completefor One Light Point Controlled By One Switch Complete All As Specified And Directed By Engineer In Charge. 49 All As Per Srl Item45 Above But For One Fan Point Controlled By One Switch Through Regulator. 50 All As Per Srl Item 45 Above But For One 5 Pin 5 Amps Socket Outlet On The Independent Board. 51 All As Per Item No 45 Above But For One 3 Pin 5 Amps Socket Outlet On The Same Board With Other Switchs. 52 All As Per Item No 45 Above But For Call Bell Point. 53 All As Per Item No 45 Above But With 2.5 Sqmm Pvc Insulated Stranded Copper Conductor Cable For One 3 Pin 15 Amps Socket Outlet. In And Including S / C 2.5 Sq Mm Pvc Insulated Copper Conductor Unsheathed 1100 V Grade Is -694 Fr Cable For Continuous Earth Wire. 54 M&L For Point Wiring With 1.5Sqmm Pvc Insulated Unsheathed Multi Stranded Copper Conductor Cable Drawing In Existingsteel / Pvc Conduit With 1.5 Sq Mm Pvc Insulated Copper Conductor Cable For Continuous Earth Wire Connected To Main Earth Dolly Excluding 3Mm Sheet Metal Box And Hylam Sheet Completefor One Light Point Controlled By One Switch Complete All As Specified And Directed By Engineer In Charge. 55 All As Per Srl Item51 Above But For One Fan Point Controlled By One Switch Through Regulator. 56 All As Per Srl Item 51 Above But For One 5 Pin 5 Amps Socket Outlet On The Independent Board. 57 All As Per Item No 51 Above But For One 3 Pin 5 Amps Socket Outlet On The Same Board With Other Switchs. 58 All As Per Item No 51 Above But For One Light Point Controlled By Two Way Switches. 59 All As Per Item No 51 Above But For Call Bell Point. 60 All As Per Item No 51 Above But With 2.5 Sq Mm Pvc Insulated Stranded Copper Conductor Cable For One 3 Pin 15 Amps Socket Outlet. In And Including S / C 2.5 Sq Mm Pvc Insulated Copper Conductor Unsheathed 1100 V Grade Is -694 Fr Cable For Continuous Earth Wire. 61 S&Fin Replacement Switch Piano, Flush Type Single Pole, One Way, 5 Amps, 240 Volts All As Specified And Directed By Eng-In-Charge. 62 S&Fin Replacementswitch Piano, Flush Type Single Pole, One Way, 15 Amps, 240 Volts All As Specified And Directed By Eng-In-Charge. 63 S&Fin Replacement Switch Piano, Flush Type Single Pole, Two Way, 5 Amps, 240 Volts All As Specified And Directed By Eng-In-Charge. 64 S&Fin Replacement Socket16 Amps, 2 In 1, Flush Type All As Specified And Directed By Eng-In-Charge. 65 Supply & Fix In Replacementbell Push, Flush Type, 5 Amps, 240 Volts All As Specified And Directed By Eng-In-Charge. 66 S&Fin Replacementfan Regulator Step Type 120 Watt, 240 Volt Complete. 67 S & F Modular Switch 1 Way 6A, 1 Modules Suitable For 240 Volt Ac Complete All As Specified And Directed By Engineer-In-Charge. 68 S & Fmodular Socket, 6A - 2 / 3 Pin Combined 2 Module, Suitable For 240 Volt Ac Complete All As Specified And Directed By Engineer-In-Charge. 69 S & F Modular Switch 2 Way 6A, 1 Modules Suitable For 240 Volt Ac Complete All As Specified And Directed By Engineer-In-Charge. 70 S&Fmodular Switch 1 Way 16A, 1 Modules Suitable For 240 Volt Ac Complete All As Specified And Directed By Engineer-In-Charge. 71 S & Fmodular Socket, 16A 2 / 3 Pin Combined 2 Module, Suitable For 240 Volt Ac Complete All As Specified And Directed By Engineer-In-Charge. 72 Supply And Fixmodular Bell Push 1 Module 5 Amps Suitable For 240 Volt Complete All As Specified And Directed By Engineer-In-Charge. 73 Supply And Fixmodular Electronic Fan Regulator Rotary Flush Step Type 120 Watt, 240 Volt Complete 74 Supply And Fix White Cover Plate With Frame, 2 Module Complete All As Specified And Directed By Engineer-In-Charge. 75 Supply And Fix White Cover Plate With Frame, 3 Module Complete All As Specified And Directed By Engineer-In-Charge. 76 Supply And Fix White Cover Plate With Frame, 4 Module Complete All As Specified And Directed By Engineer-In-Charge. 77 Supply And Fix White Cover Plate With Frame, 6 Module Complete All As Specified And Directed By Engineer-In-Charge. 78 Supply And Fix White Cover Plate With Frame, 8 Module Complete All As Specified And Directed By Engineer-In-Charge. 79 S & Fmodular Metal Flush Box 3 Module Complete All As Specified And Directed By Engineer-In-Charge. 80 S & Fmodular Metal Flush Box 4 Module Complete All As Specified And Directed By Engineer-In-Charge. 81 S & Fmodular Metal Flush Box 6 Module Complete All As Specified And Directed By Engineer-In-Charge. 82 Supply Only In Replacement Electric Calling Bell Ding Ding Type Suitable For 230 Volts Complete All As Specified And Directed By Engr-In-Charge. 83 Supply And Fixingin Replacement Ceiling Roses, Surface Bakelite 65X50mm , 3 Terminals3 Phase, Pvc / Polycarbonate, Isolated Bodyall As Specified And Directed By Eng-In Charge 84 Supply And Fixing In Replacementpvc Gang Box Suitable For One Switch / Socket 5 Amps Complete With Screw And Necessary Arrangement Complete All As Specified And Directed By Engineer In Charge. 85 All As Per Srl Item 81 Above But For One 15 Amps Switch / Socket Outlet. 86 Supply & Fix In Replacementmetal Clad Socket Single Pole And Neutral Sheet Metal Enclosure With And 20A Earth Plug And Socket Complete With One Single Pole Mcb 20 Amp 240 Volts All As Specified And Directed Complete All As Specified And As Directed By Engineer-In- Charge. 87 Supply& Fix In Replacement Of Mccb Four Pole 250 Amps, 415 Volt Thermal Release Bearing Adjestable Type Breaking Cap 36 Ka, Comlete All As Specified And As Directed By Engineer-In-Charge. 88 Supply& Fix In Replacement Of Mccb Four Pole 125 Amps, 415 Volt Thermal Release Bearing Cap 16 Kacomlete All As Specified And As Directed By Engineer-In-Charge. 89 M & L For Rigid Non Metalic Pvc Medium Grade Conduit Including Junction Boxes, Tee, Bends, Elbows, Reducers Bell Mouth Tube Ends, Fixing Accessories Such As Couplers, Lock Nuts, Saddle Pipe Hook Etc For 25 Mm Dia.Isi Marked. 90 Supply & Fix In Replacement Of Casing Capping Double Lock Type Supper Qualitysize 20 Mm Width Isi Marked With Fixing Accessoriescomplete All As Specified And Directed By Engineer In Charge. 91 Cutting Grooves In Brick Wall, 75 Mm Wide And 65Mm Deep And Shaping Horizontal Face Of Groove With Cement Mortar 1:3 92 Taking Down Of Led / Tube Light / Cfl Fitting Of Any Type Of Make And Removing Material To Store For Keeping In Safe Costudy Or For Reuse Or Taking Credit And Making Good Distrub Surface Of Walls, Floor Etc Complete All As Specified And Directed By The Engineer- In- Charge. 93 Supply And Fixingwall Mounted Ledbatten Extruded Aluminium Heat Shrink Provided For Efficient Heat Dissipation And Integrated Electronic Driver , 20 Watt Led Fitting With 100 Lumen / Watt, 6000K , 230 Volts, Diffused Optics , Etc Complete With All Accessories , Connecting Up With Twin Core Twisted Flexible Copper Conductor Cablefrom Ceiling Rose To Fitting, And Testing Complete All As Specified And Directed By The Engineer- In- Charge. Make: Havells Cat Part No-Enduralinearneobs20wled865spcwh Or Equivalent In Halonix / Crompton Greaves. 94 Supply And Fixingwall Mounted Ledbatten Extruded Aluminium Heat Shrink Provided For Efficient Heat Dissipation And Integrated Electronic Driver , 10 Watt Led Fitting With 100 Lumen / Watt, 6000K , 230 Volts, Diffused Optics , Etc Complete With All Accessories , Connecting Up With Twin Core Twisted Flexible Copper Conductor Cablefrom Ceiling Rose To Fitting, And Testing Complete All As Specified And Directed By The Engineer- In- Charge. Make: Havells Cat Part No-Enduralinearneobs10wled865spcwh Or Equivalent In Halonix / Crompton Greaves. 95 Supply And Fixing Ultra Slimsurface Decorative 15 Watt With 100 Lumen / Watt, 6000 K , 230 Volt, Led Ceiling Fitting, Complete With All Accessories , Connecting Up With Twin Core Twisted Flexible Copper Conductor Cablefrom Ceiling Rose To Fitting, And Testing Complete All As Specified And Directed By The Engineer-In- Charge.-Edgeprorddlr15wled840s Or Equivalent Inhalonix / Crompton Greaves 96 Supply And Fixing Wall Mounted Led Bulk Headfittings, 10 Watt, Warm White, 230 Volts, Diffused Optics , Etc Complete With All Accessories , Connecting Up With Twin Core Twisted Flexible Copper Conductor Cablefrom Ceiling Rose To Fitting, And Testing Complete All As Specified And Directed By The Engineer-In- Charge. 97 S&F In Replacement Led Tube Rod 20 Watt Complete Fittings All As Specified And Directed By Engr-In-Charge. 98 S& F In Replacement Sub Main Wiringwith Two Single Core Pvc Insulated Unsheathed Cable 1100 Volts Frls Grade With Multi Strand Copper Conductor And Drawn Through And Includingpvc Conduit Along With Continuous Earthing Wirebut In Green Colour Complete On Surface / Concealed Of Size 2.5 Sqmm ( 2 Single Runof 2.5 Sqmm And One Run Of 2.5 Sqmm As Earth Wire ) Note : Three Run Of Pvc Cable And One Run Of Pvc Conduitshall Be Measured As One Unit Length. 99 ( A ) All As Per Item No 95 Here In Before But 4 Sqmm ( 2 Single Runof 4 Sqmm And One Run Of 4 Sqmm As Earth Wire ) 100 ( B ) All As Per Item No 95 Here In Before But6 Sq.Mm ( 2 Single Run Of 6 Sqmm And One Run Of 6 Sqmm As Earth Wire ) 101 ( C ) All As Per Item No 95 Here In Before But 10 Sq.Mm ( 3 Single Run Of 10 Sqmm And One Run Of 10 Sqmm As Earth Wire ) 102 Supply And Fix In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Street Light Made Up Of Pressure Die Cast Aluminium Housing With High Efficient Led As Lighting Source With Toughened Glass Having Ip66 Protection With High Power120 Watt Led , 6000K , With Electronic Driver, General Spread Of Cat Part No 9405 Of Make Havells And Equivelent Make Of Phillips / Cg With All Accessories Pre-Wired And Electric Connection Using Pvc Insulated And Sheathed 1100 Volts Grade Cable With Copper Conductor Of Size 2.5 Sqmm Completewith Provn Ofnuts And Bolts Fixing On Walls / Poles Etc. Complete All As Specified. 103 S&F In Replacement Of Fan Capacitor With Copper Wire Plastic Body 2.5 Mfd Complete All As Specified And Directed By Engr-In-Charge. 104 S&F In Replacement Of Fan Capacitor With Copper Wire Plastic Body 3.15 Mfd Complete All As Specified And Directed By Engr-In-Charge. 105 S&F In Replacement Of Rubber Real For Ceiling Fan Complete All As Specified And Directed By Engineer In Charge. 106 S&F In Replacement Of Mild Steel U Clamps Including 10 Mm Dia But, Nuts, Washers And Split Pin For Ceiling Fan Complete All As Specified And Directed By Engineer In Charge. 107 S&F Of Led Ceiling Light 34 Watt 2X2 Recess Led, 6000 K Luminaire Having Glare Free Symmetrical Illumination Complete All As Specified And Directed By Engineer-In-Charge. 108 S&F In Replacement Of Ceiling Fan Heady Duty 1200 Mm Sweep Including Necessary Fixing Arrangement For Proper Fixingas Per Site Requirement Complete All As Specified And As Directed By Engineer-In-Charge. 109 M & L For Repair To Exhaust Fan / Wall Mounted Fan / Pedestal Fan Of Of Any Size ( 200 To 450 Mm Sweep ) By Replacingunserviceable Ball Bearingno 6201 / 6202 / 6203 Including Neccessary Greasing Complete All As Specified And Directed By Engineer-In-Charge. 110 S&F In Replacement Of Fan Capacitor With Copper Wire Plastic Body 1.5 To 2.25 Mfd. 111 S&F In Replacement Of Exhaust Fan Pvc Heavy Duty Non Metalic300 Mm Sweep Including Necessary Fixing Arrangement For Proper Fixing In Wall And Making Hole As Per Site Requirement Complete All As Specified And As Directed By Engineer-In-Charge. 112 S&F In Replacement Of Pvc Exhaust Fan Non Metallic Type 230-250Mm Sweep Including Necessary Fixing Arrangement For Proper Fixing In Wall And Making Hole As Per Site Requirement Complete All As Specified And As Directed By Engineer-In-Charge. 113 S&F In Replacement Of Exhaust Fan Heavy Duty Metal Body Type 230 Mm Sweep Including Necessary Fixing Arrangement For Proper Fixing In Wall And Making Hole As Per Site Requirement Complete All As Specified And As Directed By Engineer-In-Charge. 114 Supply& Fix In Replacement Of Wall Mounting Fan Heavy Duty 300 / 380 Mm Sweep Complete All As Specified And As Directed By Engineer-In-Charge. 115 S&F In Replacement Of Exhaust Fan Heavy Duty Plastic Body 200 Mm Sweep Including Necessary Fixing Arrangement For Proper Fixing In Wall And Making Hole As Per Site Requirement Complete All As Specified And As Directed By Engineer-In-Charge. 116 Supply And Fixing In Replacement Load Line Vertical Distribution Board A, Frame Made Out Of Crca 2Mm Thick Mild Steel Sheet, Double Door, Surface Mounting Tpn 8 Way 415 Volts 200 Amps Rated Bus Bar And Stove Enamels Dust And Vermin Proof Suitable Fortp / Fp A Frame Mccb Of 125 Amps =01 No Mcbfor Outgoing Comlete All As Specified And As Directed By Engineer-In-Charge.Note :- Mcb Shall Be Measured And Paid Seperately. 117 Supply And Fixingin Replacement Mcb Distribution Board With Bus Bar 200A Neutral Link , Earth Bar Made Out Of Crcamild Steel Sheet Surface Mounting Spn 8 Way 230 Volts Double Door Type Regal Gray Horizontal Type Complete All As Specified And As Directed By Engineer-In-Charge. Note :- Mcb Shall Be Measured And Paid Seperately. 118 S&F In Replacement Of Mccb 125 Amps 415 Volts 3 Phase 50 Hz With Adjustable Thermal & Adjustable Magnetic Setting Of Rapturing Capacity 25 Ka. 119 Taking Down Old Unsv Sp / Spn Mcbof Any Size. 120 S&F Mcb Sp 6 To 32 Amps 10 Ka, 240 Volt C Series All As Specified And Directed By Engineer-In-Charge. 121 Fixing Onlymcb Spn32 / 40 Amps 10 Ka, 240 Volt50 Hzrecieved From Sr Item No 33 All As Specified And Directed By Engineer-In-Charge. 122 Supply And Fix In Replacement Of Flexible Wire Twin Core 23 / .076 Approx 90 Mtr Per Roll Complete All As Specified And As Directed By Engr-In- Charge. 123 Supply & Fix In Replacement Pvc Frls Flexible Cable Copper Conductor, Unsheathed , 1100 Volts Grade Confirming To Is:694 / 1990 Of Size 1.5 Sqmm 90 Mtr Per Roll Complete All As Specified And As Directed By Engineer In Charge. 124 Supply & Fix In Replacement Pvc Frls Flexible Cable Copper Conductor, Unsheathed , 1100 Volts Grade Confirming To Is:694 / 1990 Of Size 2.5 Sqmm 90 Mtr Per Roll Complete All As Specified And As Directed By Engineer-In- Charge. 125 Supply & Fix In Replacement Pvc Frls Flexible Cable Copper Conductor, Unsheathed , 1100 Volts Grade Confirming To Is:694 / 1990 Of Size 4.0 Sqmm90 Mtr Per Roll Complete All As Specified And As Directed By Engineer-In- Charge. 126 Supply And Fix In Replacement Of Twin Core Aluminium Flexible Wire Conductor Of Size 6 Sq Mm 2 Core Complete All As Specified And As Directed By Engr-In- Charge. 127 Supply And Fix In Replacement Of Twin Core Aluminium Flexible Wire Conductor Of Size 10 Sq Mm 2 Core Complete All As Specified And As Directed By Engr-In- Charge. 128 Excavation In Trenches In Soft Soil N Exc 1.5 Mtr Wide And N.Exc 1.5 Mtr In Depth For Laying Of Pipe, Foundation For Poles, Stay, Laying Cables Etc And Getting Out Copmlete All As Directed By Engineer-In-Charge. 129 Returning Filling In Including Spreading, Leveling Watering And Well Ramming In Layers N. Exc 25 Cm In Hard / Dense Soil Copmlete All As Directed By Engineer-In-Charge.. 130 Removing Excavated Material N.Exc 50 Meters And Depositing Where Directed At A Level N.Exc 1.5 Meter Above The Starting Point Copmlete All As Directed By Engineer-In-Charge. 131 M&L For Sand Cushioning Of Cables Provided With A Layer Of Sand 8 Cm Deep Before Laying The Cable And 15 Cm Depth After Punning Down And Stretching The Cable Copmlete All As Directed By Engineer-In-Charge. 132 Supply And Layingwell Burnt Sub Class ‘B’ Bricks Old Size As Mechanicalprotection To Under Ground Cables Laying Across The Cable Copmlete All As Directed By Engineer-In-Charge. 133 Supply And Laying Gi Pipe Light Grade Galvanizedwith All Fittings Laid In Trenches Or Fix On Wall For Cable Protection Of 50 Mm Bore Coomplete All As Specified And Directed By Engineer-In-Charge. 134 Disconnecting, Removing & Taking Out Faulty U / G Cable Off Any Sizes From Trenches, Wall And Ducts Complete All Specified And As Directed 135 Supply, Laying, Testing And Connecting Cable Xlpe Insulated Armoured Heavy Duty Electric Cable With Stranded Aluminium Conductor 1100 Volts Grade Cross Section Area Of 50 Sqmm X 3.5 Core Copmlete All As Directed By Engineer-In-Charge. 136 All As Per Srl Item No 133 Above But Size 35 Sq Mm X 3.5 Core Copmlete All As Directed By Engineer-In-Charge. 137 Supply And Fixing In Replacement Of Aluminium Thimble Stud Type Suitable For Size Of Cable 240 And Above Sq Mm All As Specified And Directed By Engineer-In-Charge. 138 Supply And Fixing In Replacement Of Aluminium Thimble Stud Type Suitable For Size Of Cable 35 Sq Mm To 180Sq Mmall As Specified And Directed By Engineer-In-Charge. 139 Material And Labour For Cuttingof Road / Hard Standing Up To A Size Not Exceeding 20Cm Widthand Not Exceeding 60Cm In Depth For Laying Ofcable Protection Pipe Including Making Good The Disturbed Road / Hard Standing By Providing Pcc ( 1:2:4 ) Type B1 And Block Top With Black Bituminous Upto Existing Surface Level Complete All As Specified And As Directed By Engineer-In-Charge. 140 M&L Forearthing Complete With Gi Earth Plate Electrode 60Cmx60cmx6.3Mm Thick Buried Directly In Ground ( Earth Pit Not Less Than 2.25 Meter Deep Below Normal Ground Level ) With Top Edge Of The Plate Not Less Than 1.5 Meter Below Normal Ground Level, Connected Togalvanized Earth Lead Wire4 Mm Dia By Means Of Gi Bolts, Nuts, Check Nuts And Washers Earth Pit Surrounded By Picked Layer Of Coal Dust And 15 Mm Thick Mixture In Equal Ratio Of Magnesium Sulphate& Copper Sulphate In All Around Bottom And Top And Watering Pipe 20Mm Bore Of Gi Medium Grade With Funnel All As Shown In Electrical Plateno 5 Of Ssr Part I ( 1991 ) And Connecting To Earthing Test Point, Including Ci Cover, Frame And Pcc ( 1:3:6 ) Type C-2 Using 20Mm Graded Stone Aggregate As In Earthing Pit With Ci Cover And Framing Including Necessary Earth Work Etc, Complete All Asspecifiednote :- Pcc Chamber Shall Be Constructed At Least One Meter Away From Building Shall Be Provided In Slanting Manner. Note:- Pcc Pit Cover Shall Be Precast Of Rcc 1:2:4 Type B-I 80 Mm Thick Reinforced With Xpm Weighting Not Less Than 4 Kg ( Sqm In Liew Of Ci ) 141 All As Per Item No 138 Here In Beforebut Using Galvanised Iron Strip 25X4mm As Earthhing Lead 142 S & F In Repair 4Mm Dia Gi Wire Complete All As Specified And Directe By Engr-In-Charge. 143 Material And Labour For Galvanisediron Strip 25 X 4 Mm With Saddles And Fixing Screws And Connected As Per Site Requirement Comlete All As Specified And As Directed By Engineer-In-Charge. 144 Supply & Fix In Replacement Led Bulb 12 Watt Pin Type Warm Whiteofall As Specified And Directed By Engineer In Charge. 145 Supply & Fix In Replacement Led Bulb 12 W Screw Type Warm Whitewarm Whiteall As Specified And Directed By Engineer In Charge. 146 M& L For Fabricate, Supply And Install Cubicle Type, Cpri Approved Lt Panel Board, Outdoor Type, Totally Enclosed, Dust & Vermin Proof ( Protection Class Ip 65 ) Front Opening With Selflocking Arrangment Made Out Of Ms Angle Iron Frame Work, Ms Flat Iron And Crca Sheet Of 3.15 Mm Thick As Per Is 5039 Duly Painted With Powder Coated Paint Of Approved Shade. The Panel Shall Be Suitable For 415 Volts, 50 Hz, 3 Phase 4 Wire System And Shall Be Complete With 300 Amp Capacity Copper Bus Bar, Wiring The Panel Board With Suitable Size Of Pvc Insulated, Multi Stranded Copper Cables And All Connected Acessories Required For Functioning Of Panel Board Such As Thimbles, Glands, Bolts, Nuts, Washers Etcincluding Supply And Fixingfollowing Acessories:- Incoming :- ( A ) Mccb 320 Amps, 4 Pole, 36 Ka Dpx3 630 Cat No 422006- 1 Nomake Legrand And Equvilent Make Of Simens / Schinder ( B ) Digital Type Volt Meter - Set 01 ( C ) Digital Type Ammeter With Suitable Rating Cts Conforms To Relevent Is Specification, - Set 01 ( D ) Led Type Indicator Lamp Set Of Red , Yellow And Blue- Set 01Out Going ( A ) Mccb 200 Amps, 4 Pole, 36 Ka Dpx3 250 Cat No 420248- 03 Nos ( B ) Mccb 125 Amps, 4 Pole, 25 Ka Dpx3 160 Cat No 422006 - 02 Nosfoundation- ( I ) Plateform For The Panelwith Pcc 1:2:4 Type D-2 With 40Mm Graded Crushed Stone 15 Cm Thick In Foundation Brick Work In 1:6 With Sub ClassB Old Size Bricks Sith Sandering 15Mm In Cm1:6Of Exposed Surface And 100Mmthick Pcc Padding 1:3:6 Type C-1 Using 20Mm Graded Crushed Stomneaggregate On Top Plate Form Shall Be Such That It Is Of A Height 45Cm Above Nearest Road Level.
Contract Date: Jul 20, 2024 Contract Value : ₹ 20.57 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Delhi View Result →
43.
Public Administrative Department #3672933 AOC
Supply Of Surgical Disposable Suture Materials 2023 2024 2024 2025 , Absorbant Cotton Wool Net Weight500 Gm ( I.P.) , Absorbant Gauze With Hydrogen Peroxide Bleach - 90Cm X 18M - (F Ii Schedule ) , Absorbant Gauze Folded Bundle Of 5 - 2 X 2 With Hydrogen Peroxide Bleach(F Ii Schedule ) , Absorbant Lint 400 Gm , Absorbant Patty Pack Size 20 X 30 Mm.(Pack Of 10 Nos) , Adhesive Plaster I.P 2.5Cm X 9M , Adhesive Plaster I.P 10Cm X 9M , Adult Diper , Bandages 3 7.5Cm X 4M (F Ii Schedule ) , Bandages 4 10Cm X 4M(F Ii Schedule ) , Bandages 6 15Cm X 3M (F Ii Schedule ) , Brown Tape For O.T. Sealing Plastic Coated 4 Length 183 Mts , Cotton Buds Packet (Packet Of 50) , Cotton Roll For Patty Pack10 Cm X 3 Mtr 4 , Cotton For Patty Pack15 Cm X 3 Mtr 6 , Crape Bandage 4 ( Lenght 4 Mtr) , Crape Bandage 6 ( Lenght 4 Mtr) , Disposable Cap ( Surgeon ) , Disposable Foot Safty Gear , Disposable Mask ( Surgeon -3Ply ) , Elastoplast 4 ( Lenth 4/6 Mtr) , Gauze Dressing Impregnated With Paraffin, Containing 0.5% Chlorhexidine Acetate ( 10 Cmx 10 Cm ) ( Bactigrass) , Maternity Sanitary Pad/Napkin-Each Pad/Napkin Made From Compressed Cotton & Gauze Having Size 9 Long, 2.5 Width, 2 Thickness. Both End Having Knot & Weight 17-18Gm.Each.With Hygenic Comfort & High Absorbancy.-(Pkt Of 10Pads) , Micropoore Tape 1 ( Lenght 5 Mtr) , Micropoore Tape 1/2 ( Lenght 5 Mtr) , N-95 Mask , Opsite Adhesive Drape - Sterile (Incise Drape) Large Size 30Cms X 40 Cms , Opsite Adhesive Drape - Sterile (Incise Drape)Medium / Small Size , Paediatric Nappy Pad (Sanitary Pad)Small Size , Paediatric Nappy Pad (Sanitary Pad) Medium Size , Plaster Of Paris Bandages 4 Inch (10 Cm X 2.7 Mtr) , Plaster Of Paris Bandages 6 Inch (15 Cm X 2.7 Mtr) , Soft Cotton Roll 100Gm 4 , Soft Cotton Roll 100Gm 6 , Bard Truct Biopsy Needle (Lenght 10/16) , Disposable Needle No 22. 1& 1 1/2 , Disposable Needle No.26 Half Inch , Disposable Needle No.26- 1 , Disposable Needle No.26 -1.5 , Disposable Needle No.26 -2 , Disposable Needle No.27 Half Inch & One & Half Inch , Disposable Needle Sterile No. 18 , Disposable Needle Sterile No. 20, 21, 22 , Disposable Needle Sterile No. 23, 24 , Disposable Spinal Needle 27G , Disposable Spinal Needleno.23,24 Length 8.5 Cm To 10 Cm , Disposable Spinal Needle No.25 Length 8.5 Cm To 10 Cm , Scalp Vein Set No.22 , Disposible Bcg Syringewith Needle , Disposable Insulin Syringe 1Ml , Disposable Preheparinised Abg Syringe 2 Ml , Disposable Syringe 2 Ml , Disposable Syringe 2 Ml With 0.1 Ml Marking , Disposable Syringe 5 Ml , Disposable Syringe 5 Ml With 0.1 Ml Marking Leur Lock , Disposable Syringe 10 Ml , Disposable Syringe 10 Ml With 0.5 Ml Markingleur Lock , Disposable Syringe 20 Ml , Disposable Syringe 50Ml , Disposable Leur Lock Syringe 3 Ml , Cvp Cannula- 5 Fr , 7 Fr , I.V. Cannula Sterile No.16 , I.V. Cannula Sterile No.18 , I.V. Cannula Sterile No.20 , I.V. Cannula Sterile No.22 , I.V. Cannula Sterile No.24/ 25 , I.V. Cannula Sterile No.26 , Mtp Plastic Suction Cannula 8,10,12. , Disposable Suction Catheter Sterile 8, 10, 12, 14, 16 , Red Rubber Catheter 3 To 12 Size , Sterlise Folleys Catheter 14, 16 Size , Sterlise Folleys Catheter 18, 20, 22 Size , Sterlise Folleys Catheter 8, 10, 12 Size , Folleys Catheter Threeway 20, 22 , Disposable Abdominal Drain Kit No 20,. 28, 32 , Disposable Removable Drain Set Size 14 ,16 , Disposable Removable Drain Set Size 8, 10,12 , Disposible Corrugated Drain , Disposible Minivac Drain , Disposable Icd Tube Size 16,20,28,30,32 , Disposable Icd Bag , Disposable Infant Feeding Tube 5,6,7,8,9,10 , Disposable Ryles Tube No.12, 14, 16 , Disposable Tracheostomy Tube- 7Mm / 8 Mm (Portex) , Plastic Suction Tubbing (Transperant) , Blood Transfusion Sets , Infusion Sets With Airvent On The Set Itself (Non - Toxic Pvc Soft Transperant Tubing With Plastic Transperant Merphy Chamber) , Microdrip Sets(Non - Toxic Pvc Soft Transperant Tubing With Plastic Transperant Merphy Drip) , Silicon Tubing For Suction For Ent , Ventilater Filter (Inspiratory Bacteria Filter/ H.M.E Filter)----- Disposable , Ventilator Neonate Tubing For Baby Log Complete Set----- (Reusable) , Ventilator Tubing(Patient Circuit ) Adult----Disposable , Ventilator Tubing Autoclavable -Adult , Ventilator Tubing Autoclavable- Neonatal , Ventilator Tubing Autoclavable- Paediatric , B.P.Blade No.10, 11, 12, 15, 23, 24. (Pkts. Of 100) , B.P Apparatus (Mercurial Type) , B.P Apparatus (Mercurial Type) On Stand , B. P. Cuff With Ballon Only , Camera Cover For Laparoscopic Surgery , Central Line Double Lumen , Central Line Triple Lumen 7.5 Fr. , 5 Fr , Collagen Dressing , Crystaline Silver For Dressing 10Cm X10cm , Disposable Umbilical Cordclamp , Disposableplastic Appron For O.T. Use , Disposable B.D. Connector , Disposable 3 Way Stop Cock , Disposable Hiv Kit ( Apron Upto Ankle, Gloves, Goggle Zero No, Cap, Mask, Legin Guard Upto Knee, Hand Guard Upto Above Elbow, Drape, Gown.) , Disposable Hudson Chemberwith Nebulisation Mask.Adult , Disposable Hudson Chemberwith Nebulisation Mask.Paed. , Disposable Oxygen Prongs - Adult , Disposable Oxygen Prongs - Paediatric , Disposable Sterile Skin Stapler , Disposable Top Sheet6 X 3 Plain Poly Drape , Disposable Urine Bag , Dosiflow , Double J Stent 5F, 6F , Essential Irrigation Blade - 4.0 Mm ( Straight & Angled ) ( For Micro Debrider) , Foetal Doppler Moniter , Fumigation Machine , Gigli Saw Wire , Gloves Disposable Plastic , Gloves Disposablefree Powdersterile 6, 61/2 , 7, 71/2 Isi Mark Pairs , Glovesautoclavable Surgical 6, 61/2 , 7, 71/2 Isi Mark Pairs , Haemo Glucose Test Strip , Haemo Static Solution , Lead Apron For X Ray , Lead Curtainfor X Ray , Ligating Clip-200 ( For Laparoscopic Surgery ) , Ligating Clip-300 ( For Laparoscopic Surgery ) , Ligating Clip-400 ( For Laparoscopic Surgery ) , Macintosh Superior Quality , Nasal Pack With String 8.0 Cm X 1.5 Cm X 2.0 Cm ( Merocel) , Nebulizer , Needle Cutter With Burner , Oxygen Cylinder Carrier Trolly , Oxygen Flow Meter , Oxygen Hood , Paediatric Burrete Set Capacity 100Ml , Plastic Air Ways Different Size 0,1,2,3,4 , Ryles Tube Drain Bag , Skin Graffting Blade , Stethoscope Adult , Stethoscope Neonatal , Stehoscope Paediatric , Suction Machine - Electrically Operated With Two Bottles , T Piece , Thermometer Digital , Thermometer Rectal , Tonsil Snare Wire , Tubal Ligation Band. , Ventury Mask Set , Weight Machine- Adult Use( Upto 120 Kg) , Weight Machine With Pan Forpaediatricuse , Biological Steam Sterilization Indicator - Self Contained Vial Of Spore Strip B.Stereo- Thermophiius Population , Bowie Dick Test Pack For Monitoring Vaccum Formation In Autoclave Chamber , Process Steam Indicator Tape 3/4 Roll 1222-6N Comply 3M Comply Class 1,50Mtr 18Mmx55mm , Steam Chemical Indicator With Moving Front Chemical Integrators To Verify All Parameters Of Steam Sterilization I.E. Time , Temperature & Quality Of Steam , Alcohol Hand Rub Disinfectant Containging Ingradiates Benzalkonium Chone Ip 1% W/V + 1 Propunol 20% W/V + Macetromium Ethyl 500 Ml , Aldelyde Free Surface Disinfectants Containing Preparation Like Ethanol & Propanol For Disinfection Of Elect. Eqp. 500 Ml , Alkaline Glutarldehyde Disinfectant Solution 2.0% W/V With Activator - 5 Litrejar , Alongwith 10 Potency Testing Indicators , Anti Microbable & Body Wash Lotion For Prevention Of Skin Infection 500 Ml , Antiseptic Germicidal Solution (Chloroxynelone) 4.8% W/V + Terpineol 9% W/V 5 Litre , Chlorhexidine Gluconate 0.3 % & Cetrimide 0.6 % 500 Ml , Concentrated Cold Sterilisor For Thermolabile And Thermostable Instrument 500 Ml , Disinfectant Non Toxic Having Ingredient Bonded Iodine Glytereldyde + Ipl + Surface Active Agent Ltr. , Ethyl Chloride Spray - 100 Ml Bottle , Eusol Liquid For Dressing 450 Ml , Formaldehyde Solution 4500 Ml. Bp , Gloves Powder (Purified Talc) 500 Gms , Hydrogen Peroxide 450Ml I.P. , Icthamol 10 % In Glycerine500ml Bottle , Instrument Lubricant Medicinal Paraffin Oil Along With Emulsifire Toxicologically Safe Accordance To Eniso 10993-1 400Ml Bottel , Lidocaine 10% Spray- 50 Ml Bottle , Lysol (Without Soap) 450 Ml. , Magnesium Sulphate Crystal 450Gm , Perasefe Powder For Laproscope Instrument - , Pottasium Permagnate 450Gm , Povidin Iodine Cleaning Lotion 7.5% W/V Availble Iodine 7.5% Scrub Lotion 500 Ml , Povidin Iodine Topical 0.5% W/V Available Iodine (500Ml. Bottle) Terpineol 9% V/W Ab Alcohol 13% 500 Ml , Sodium Hypochloride 5 Ltr. Jar , Solvent Ether 500Ml , Surface & Environmental Disinfectants Concentrate 0.5 To 2% For Fumigation Disinfection Of O.T. 500 Ml , Terpentine Solution For Maggots Removal X100ml , Tincture Benzoin 400 Ml , Ultrasonic Cleaning Solution Alkaline Cleaner Which Effectivally Removes Organic &Inorganic Soiled Reside 1Ltr Bott. , Potassium Mono Pursulfate / Potassium Hydrogen Sulfate / Potassium Sulfate Triple Saltsolution For Fumigation(500Gms) , Disposable Ecg Electrode , Ecg Jelly 250Gm , Ecg Rolls For B P L Make 6108 T Model , Ecg Rolls For B P L Make 6208 T Model80 Mm X 20 Mtrs Roll , Ultra Sonography Gelly 250Gm , Pulse Oximeter , Tissue Paper Pack Of 100 Papers , Ab Gel , Barbour Linen Thread No. 20 , Barbour Linen Thread No. 40 , Barbour Linen Thread No. 60 , Bone Wax , Braded Coated Polyglactin 910 With Antibacterial Coating 23Mm Reverse Cutting Needle (Port Needle) 35 Cm Length Size No 1 , Braded Coated Polyglactin 910 With Antibacterial Coating Triclosan Suture No. 1-0 1/2 Circle Round Body (Box Of 12 Foils) , Braded Coated Polyglactin 910 With Antibacterial Coating Triclosan Suture No. 2-0 1/2 Circle Round Body (Box Of 12 Foils) , Braded Coated Polyglactin 910 With Antibacterial Coating Triclosan Suture No. 3-0 1/2 Circle Round Body (Box Of 12 Foils) , Braded Coated Polyglactin 910 With Antibacterial Coating Triclosan Suture No. 4-0 1/2 Circle Round Body (Box Of 12 Foils) , Braded Coated Polyglycolic Acid Suture No. 1 1/2 Circle Round Body Length 90 Cm Needle 40 Mm Heavy(Box Of 12 Foils) , Braded Coated Polyglycolic Acid Suture No. 1.0 Half Circle Needle Round Body ( Box Of 12 Foil) , Braded Coated Polyglycolic Acid Suture No. 2.0 Half Circle Round Body Needle ( Box Of 12 Foil) , Braded Coated Polyglycolic Acid Suture No.3.0 Half Circle Round Body Needle ( Box Of 12 Foil) , Braded Coated Polyglycolic Acid Suture No. 5-0 Half Circle Round Body (Box Of 12 Foils) , Braded Coated Polyglycolic Acid Suture No. 1 Cutting Needle (Box Of 12 Foils) , Braded Coated Polyglycolic Acidsuture No. 1 - 0 Cutting Needle (Box Of 12 Foils) , Braded Coated Polyglycolic Acid Suture No 2- 0 Cutting Needle (Box Of 12 Foils) , Braded Coated Polyglycolic Acid Suture No. 3-0 3/8 Circle Cutting Needle (Box Of 12 Foils) , Braded Coated Polyglycolic Acid Suture No. 4-01/2 Circle , Braded Coated Polyglycolic Acid Suture No. 4-0 3/8 Cutting Needle ( Box Of 12 Foil) , Braded Coated Polyglycolic Acid Suture No. 6-0 Double Arm Cutting Needle (Box Of 12 Foils) , Braded Coated Polyglycolic Acid Suture No. 8-0 Double Armcutting Needle (Box Of 12 Foils) , Chromic Catgut No.1 Without Needle Length 150 Cm , Chromic Catgut With Needle 1-0 1/2 Circle Needle Length 76 Cm Needle 30 Mm (Box Of 12 Foils) , Chromic Catgut With Needle 2-0 3/8 Circle Needle Round Body Needle 30 Mm (Box Of 12 Foils) , Chromic Catgut With Needle 3-0 1/2 Circle Needle Round Body Length 70 Cm Needle 30 Mm(Box Of 12 Foils) , Ethilon Loop No. 1 , Ethilon Loop No. 1-0 , Monafilament Polymide Suture 1-0 1/2 Circle Round Body 150Cm 40Mm Needle (Box Of 12 Foils) Cutting Needle , Monafilament Polymide Suture 2-0 3/8 Circle Reverse Cutting150cm 40Mm Needle (Box Of 12 Foils) , Monafilament Polymide Suture 3- 0 3/8 Circle Reverse Cutting 38Mm Needle (Box Of 12 Foils) Cutting Needle , Monofilamentpolymide No. 4 -0 Straight Cutting Needle (Box Of 12 Foils) , Monofilamentpolymide No. 8-0 Box Of 12 Foils. , Monofilamentpolymide No. 10-0 Box Of 12 Foils. , Monofilamentpolypropelene Mesh For Herniaplasty 3 Inches X 6 Inches , Monafilament Polypropelene Mesh For Herniaplasty-2 Inches X 4 Inches , Monafilament Polypropelene Mesh - 6 Inches X 6 Inches , Monafilament Polypropelene Suture No.1 Halfcircle Round Body Needle (Box Of 12 Foils) , Monafilament Polypropelene Suture 1-0Half Circle Round Body 10Cm 30Mm Heavy Needle (Box Of 12 Foils) , Monafilament Polypropelene Suture 2-0 Halfcircle Round Body 76Cm 30Mm Needle (Box Of 12 Foils) , Monafilament Polypropelene Suture 3-0 Halfcircle Round Body 70Cm 25Mm Needle (Box Of 12 Foils) , Monafilament Polypropelene Suture 4-0 Half Circle Round Body 70Cm Needle (Box Of 12 Foils) , Monafilament Polypropelene Suture 5-0Round Body(Box Of 12 Foils) , Monafilament Polypropelene Suture 6-0Round Body (Box Of 12 Foils) , Poliglecaprone 25 With Antibacterial With 26Mm 3/8 Cicle Cutting Needle Size 3-0/ 70 Mm Length , Suture Material Braded Silk No. 1 On Cutting Needle (Box Of 12 Foils) , Suture Material Braded Silk No. 1-0 On Cutting Needle (Box Of 12 Foils) , Suture Material Braded Silk No. 2-0 On Cutting Needle (Box Of 12 Foils) , Suture Material Braded Silk No. 3-0 On Cutting Needle (Box Of 12 Foils) , Suture Material Braded Silk No. 5-0 On Cutting Needle (Box Of 12 Foils) , Suture Material Braded Silk Suture No.2-0 Half Circle Round Body Length 76Cm 30Mm Needle(Box Of 12 Foils) , Suture Material Braded Silk Suture No.3-0 Halfcircle Round 30Mm Heavy 30Mm Needle(Box Of 12 Foils) , Sterilised Surgical Suture Catgut Cromic(Pre-Knotted Loop Ligature) , Topical Tissue Adhesive(N-Butyl-2-Cynoacrylate) , Titanized Polypropelene Mesh(10Cmx15cm) , Titanized Polypropelene Mesh(15Cmx15cm) , Titanized Polypropelene Mesh(20Cmx15cm) , Disposable Eye Drape With Pouch (110 X 70Cm) With Sterilization Indicator , Disposable Eye Pads ( 6 Cm X 8 Cm) , Dissection Blade (Crecent) , Entry Blade 2.8Mm , Entry Blade 3.2Mm , Fibrin Sealant Kit I.P. ( Glue )( Fibrinogen 70 Mg/Ml - Component 1 & Thrombin Preparation - Component 2) , Foldable Hydrophilic Acrylicposterior Chamber Intraocular Lenses 6 By 12 Mm P-Hemawith 25% Water Content.(With Disposable Injector System From +10 To +26 Dioptre. +18 To +22D( 500N0s. ) And Rest In Equally Divided No.) , Mvr Blade , Pmma Posterior Chamber Intra Ocular Lenses 6 By 12.5 Mm ,Single Piece, Biconvex, Uv Absorbing Optic (+ 10 To + 28 Diopters, + 16 To + 24 ) , Phaco Sleeves Compatiblefor Alcon Laureate Phacoemulsification Machine , Phaco Sleeves Compatiblefor Opticonphacoemulsification Machine , Phaco Needle Ultrasonic Tip 30 Deegree Kelman Type Foroptikon Phacoemulsification Machine , Phaco Needle Ultrasonic Tip 15 Deegree Foroptikon Phacoemulsification Machine , Phaco Needle Ultrasonic Tip 30 Deegree Kelman Type For Alcon Laureate Phacoemulsification Machine , Phaco Needle Ultrasonic Tip 45 Deegree Kelman Type For Alcon Laureate Phacoemulsification Machine , Phaco Tubing External Foralcon Laureate Phacoemulsification Machine (Disposable) , Phaco Tubing External Foroptikon Phacoemulsification Machine , Silicon Intubation Nasal Set 7.5Mm , Test Chamber Optikon Phacoemulsification Machine , Test Chamberfor Alcon Laureate Phacoemulsification Machine , Trolly Drapes Disposible(100X75cm) With Sterilization Indicator , Vitrctomy Cutter (Autoclavable Pneumatic Gullitone) For Optikon Phacoemulsification Machine , Vitrctomy Cutter For Alcon Laurette Phacoemulsification Machine , White Protective Goggles After Cataract Surgery , Thermal Gun , Isofluren Solution 250 Ml , Sevoflurane Soln 250Ml , Ambu Bag With Mask, Adult (Silicon) , Ambu Bag With Mask, Neonatal(Silicon) , Ambu Bag With Mask, Paediatric(Silicon) , Armourdcuff Tubes (F.G.)24,26,28,30,32,34,36,38,40 (Set Of.9) , Baincircuit Adult , Jackson Rees Circuit - Paeditric , Cavafix 14,16 Gaze(70Cms) , Cvp Monitoring Sets , Disp. Epidural Catheterplain , Disp. Nasal Oxygen Cannula , Disp. Rae Tube Oral Cuffed No. 5 To 10 South Pole (Set Of 11) , Disp. Rae Tube Uncuffed No. 3 To 6 North Pole (Set Of 7) , Disp.Double Lemen Tube Lt Side 26,28,32,37, 39(Set Of 5) , Disp.Double Lemen Tube Rt Side26,28,32,37, 39(Set Of 5) , Disp.Oxygen Face Mask-- Adult , Disp.Oxygen Face Mask With Nebulisation Chamber , Disposable Oxygen Mask --Paediatric , Disposible Epidural Catheter System One 16G & 18 G , Disposible Epidural Catheter System Two 16G & 18 G , Disposableendotrachial Cuff Oral Pvcsize 2 To 4 , Disposable Endotrachial Cuff Oral Pvc Size 4.5 To 6 , Disposable Endotrachial Cuff Oral Pvcsize 6.5,To 10 , Disposable Endotrachial Plain Oral Pvc Size 2 To 6.5 , Etco2 Connecting Tubing , Etco2 Water Trap , Gel Head Rings Adult , Gel Head Ringspaeditric , Gel Horseshoe Head Rings , Intubating Bougie , I.V. Extension Tubing10 Cms , I.V. Extension Tubing100 Cms , Laryngeal Mask Airway 1, 1.5 ,2,2.5,3,4, , Lma Supreme Size 3 ,4 ,5 ( Set Of 3 ) , Red Rubber Endotrachial Tube Plain Size 2,2.5,3,3.5,4,4.5,5,5.5,6,6.5 , Red Rubber Endotrachial Tube Cuff Oral Size 5,5.5,6,6.5(Set Of 4) , Red Rubber Endotrachial Tube Cuff Oral Size7, 7.5 8 (Set Of 3) , Red Rubber Endotrachial Tube Cuff Oral Size 8.5 , 9,9.5,10 (Set Of 4) , Sodalime For Drager Anaesthesia Work Station - 5 Litre , Frova Ventilating Bougie , Pns Needles Disposable For Nerve Blocks 5, 7.5 Cm , Pressure Tubing (Arterial Extension ) 10 Cm , Iv Catheter For Arterial Cannulation (20G/22G) (Ex-Vygon) , I.V. Extension Tubing50 Cms , Lignocaine Viscous 2% Syrup , Digital Bp Intrument , Acetonesol 500 Ml , Single Piece Foldable Hydrophobic Acrylic Posterior Chamber Intraocular Lens , Anterior Chamber Intraocular Lens (Pmma) , Iris Claw Lens , Conformer , Silocon Frontalis Sling , Bandage Contact Lens , Corneal Trephines (Disposable) , Double Armed 10-0 Prolene Suture With Straight Needle , Mini Monoka Canalicular Stent , Polyethylene Non Toxic Material Size 24X7 Gauge 259Sm Amniosac Bag , Suture Material Non Absorbable Polypropeleneno. 3-0 Onreverse Cutting Needle (Box Of 12 Foils) , Suture Material Non Absorbable Polypropeleneno. 5-0 Onreverse Cutting Needle (Box Of 12 Foils) , Suture Material Non Absorbable Polypropeleneno. 4-0 Onreverse Cutting Needle (Box Of 12 Foils) , Suture Material Non Absorbable Polypropeleneno. 6-0 Onreverse Cutting Needle (Box Of 12 Foils) , Suture Material Absorbable Vicrylno. 5-0 Onreverse Cutting Needle (Box Of 12 Foils) , Suture Material Absorbable Vicrylno. 4-0 Onreverse Cutting Needle (Box Of 12 Foils) , Sterile Hemocoagulase Solution 0.2 Cu (10 Ml) , Roller Gauze½ X 150 Mm Made Out Of F Ii Seduled Gauze 3 Folded & Rolled As Per Sample , Roller Gauze 5 X 160 Mm Made Out Of F Ii Seduled Gauze 4 Cotton Wool I.P , Cotton Loger Surrounded By Gauze &Rolled As Per Sample , 100 % Powder Free Latex, Pu Coated, Gama Radiated Gloves Having Endotoxin <7Eu/G Ce & Astm03577 Certified. , Ligation Clips Titanium Medium Size For Use With Open & Endoscopic Single Clip Applicator - 6 Clips In White Cartidge , Ligation Clips Titanium Medium Large Size For Use With Open & Endoscopic Single Clip Applicator - 6 Clips In Green Cartidge , Ligation Clips Titanium Large Size For Use With Open & Endoscopic Single Clip Applicator - 6 Clips In Yellow Cartidge , Absorbable Unidirectional Knotless Tissue Control Device, Symmetric Anchoring Pattern With 5 Anchors/Cm, Triclosan Coated Polydioxanone With Fixation Tab, Size1, 48Mm ½ Circle Taper Point - Needle, 45Cm , Calcium Alginate Dressing With Haemostatic & Exudate Management Capability Composed Of 80% Calcium & 20% Sodium Ions With Glucuronic & Mannuronic Acid In The Ratio 2:1 (Size-10 Cm X 10 Cm , Calcium Alginate Dressing With Haemostatic & Exudate Management Capability Composed Of 80% Calcium & 20% Sodiumions With Glucuronic & Mannuronic Acid Inlthe Ratio 2:1 (Size-15 Cm X 15 Cm) , Absorbent Polyurethane Foam Dressing For Moderate To Highly Exuding Wounds, Patented Silver Profile With Sustained Release Of Silver During The Entire Wear Time (Up To7 Days), Unique 3D Foam Structure For Superior Absorption,Water Proof And Bacterial Proof Semi-Permeable Polyurethane Top Film (Size-10 Cm X 10 Cm) , Absorbent Polyurethane Foam Dressing For Moderate To Highly Exuding Wounds, Patented Silver Profile With Sustained Release Of Silver During The Entire Wear Time (Up To7 Days), Unique 3D Foam Structure For Superior Absorption,Water Proof And Bacterial Proof Semi-Permeable Polyurethane Top Film (Size-15 Cm X 15 Cm) , Esmarche Bandage 6 Inch , Esmarche Bandage 4 Inch , Sterile Surgical Marker Pen , Loban Large (Sterile Adhesive Drape Impregnated With Iodine) , Stockinette Large , Knee O Drape , Sterile Cautery Pencil , Cutasept , Tourniquet Machine , Autoclavable Tourniquet , Hip U Drape , Tourniquet Cuffs Set , Face Shields , Dry Collagem Sheets 5*5 Cm(100Box) , Dry Collagem Sheets 10*10 Cm , Disposable Biopsy Punch 3Mm , Disposable Biopsy Punch 4Mm , Disposable Biopsy Punch 5Mm , Gel Foam 1*1 Cm (Box Of 4 X 20) , Perfluorodecalin Powder (Pfd) (100Gm) , Platelet Rich Plasma Tubes (15Ccplain Sterile Plastic Tubes) , Platelet Rich Plasma Tubes With Acd (10Cc Sterile Plastic Tubes With Acd) , Transperent Strech Adhesive Bandage Tape (5Cmx5m) , Tegaderm (6Cm X 7Cm) Transperent Film , Transpore Surgical Tape 1 (Length 5 Mtr) , Glass Syringe 5Ml , Glass Syringe 10Ml , Desflurane Solution , Radial Artery Catheter Pe 20Gm 8Cm. Kit Must Bls Valve And Visualisation Chember To Avoid Blood Exposure To Air And Prevent From Needle Stick Injury. Device Must Support In Confirmation Of Arterial Puncture. , Set For Epidural Anaesthesia, 19G L-90Cm Radiopaque Line Polyrethane Cathter With Closed With Three Lateral Eyes With Easylock Connector And Catheterguide, 17G L-90Mm Touhy Needle With Metal Stylet & Transperent Hub., 0.22 Micron Meter Flat Filter, 10 Ml Syringe , Duel Guidance Needle Which Can Be Used For Nerve Locator With Nerve Stimulator And Ultrasonic Guided. Insulation Must Be Over The Complete Needle Till The Tip. 20 Degree Back Cut Bevel For Better Isertation Control. It Should Be Smooth Coating Eith Glass Beads For The Better Visibility Under Usg. Size -25Mm,35Mm,50Mm,85Mm,100Mm,120Mm. , Duel Guidance Needle Which Can Be Used For Nerve Locator With Nerve Stimulator And Ultrasonic Guided. Insulation Must Be Over The Complete Needle Till The Tip. 20 Degree Back Cut Bevel For Better Isertation Control. It Should Be Smooth Coating Eith Glass Beads For The Better Visibility Under Usg. Size -25Mm,35Mm,50Mm,85Mm,100Mm,120Mm. , Epimatic Syringe For Automatic Detation Of Epidural Space , Double Duct Silicon Oxygenated Bougie Bo Signac For Difficult Intubation (Cormack Superior To 2)With Decompressed Opening With No Risk Of Barotrauma,Allows Oxygention (Upto 15Ltr/Min),Length- 60Cm,Marking Every- 10Cm,Angle-40 Degree (Ce Certified,Fda Approved) , Spinal Needle 22G 15Cm , Whitacare Spinal Neele 25G 12Cm , Closed Circuit Silicon Tubings With Reservoir Bag- Adult , Closed Circuit Silicon Tubings With Reservoir Bag- Peadiatric , Reservoir Bags 2L , Reservoir Bags 1L , Reservoir Bags 500Ml , Absorbable Unidirectional Knotless Tissue Control Tissue Control Device, Symmetric Anchoring Pattern With 5 Anchors/Cm,Triclosan Coated Polydioxanone With Fixation Tab,Size 1-0,36Mm 1/2 Circle Taper Point Needle,45 Cm , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat,Structured Non-Woven Material Powder Form,With Bactericidal Property. Ease Of Use In Both Open And Minimally Invasive Procedures. Approved By Us Fda 3 Gm , Absorbable Adhesion Barrier In The Form Of Off-White Knitted Fabric Prepared By Oxidized Regenerated Cellulose Indicated For Both Open And Laparoscopic Procedures , Gynecare Tran Vaginal Tape Device Intended To Use As A Pubo Urethral Sling For Treatment Of Stress Urinary Incontinence For Female , Two-Point Absorbable Fixation Device For Lap Hernia Repair. Trigger Squeeze Mechanical Device With Straight Cannula,Pre Loaded With 25 Absorbable Strapeswhich Are Made Of A Blend Of Polydiaxanone Dyed With D&C Voilet No.2 And L(-)-Lactic/Gloycolide Copolymer.Inserted Lenght Of Strap Should Be 6.7 Mm , Tissue Seperating Multilayer Mesh For Intra Abdominal Open And Laparoscopic Ventral Hernia Repair. Soft Polypropylene Mesh Clubbed With Polydiaxanone Layer And Has Oxidized Regenerated Cellulose On Visceral Side (Size-15Cm X 15Cm) , Wound Hb Spray Medicated Liquid , Aquacel Ag + Plus Extra 10X10 Cm Specification- Hydrofiber Dressing With 1.2% W/W Impregnated Ionic Silver 10Cmx10cm , Aquacel Ag + Plus Extra 15X15 Cm Specification- Hydrofiber Dressing With 1.2% W/W Impregnated Ionic Silver 15Cmx15cm , Aquacel Ag Surgical 9X30cm Specification- Hydrofiber Dressing With 1.2% W/W Impregnated Ionic Silver & Triple Hydrocolloid Matrix 9X30cm Dressing , Aquacel Ag Surgical 9X25cm Specification- Hydrofiber Dressing With 1.2% W/W Impregnated Ionic Silver & Triple Hydrocolloid Matrix 9X25cm Dressing , Advance Wound Care Device (Endoform Ecm) It Should Come As Natural Dermal Template High Flow 5Cm X 5Cm & 10Cm X 12.7Cm And Antimicrobialdermal Template High Flow 5Cm X 5Cm & 10Cm X 12.7Cm , Advance Deep Tissue Wound Care Device (Myriad Soft Tissue Matrix) It Should Come As Thin 5 X 5 Cm , Seriderm A Non-Adherent Absorbent Wound Dressing It Should Come In Sizes Of 5Cmx5cm & 10Cm X 10Cm As A Sterile Dressing , Ablecate (Cvc) Specification (Size 4.5Fr,5.5Fr,7Fr,8.5Fr) Cvc With Straigth &Y Needle Available,Nitinol Gudie Wire,Three Brushes For Cleaning,Two Type Of Sutures,Tray For Keeping Betadine Or Normal Saline,Cotton Plug ,Gauge Piece,Surgical Drape With Central Hole,Pair Of Powder Free Hand Gloves , Hdc Specification Hdc With Straigth And Curve Lumen Available,Nitinol Gudie Wire,Three Brushes For Cleaning Two Types Of Sutures Trai For Keeping Betadine Or Normal Saline Cotton Plug Gauge Piece Surgical Drape With Central Hole, Pair Of Powder Free Hand Gloves , 3*44 Cm Ribbin Of Calcium Alginate Dressing With 65-75% Guluronic Acid Unique Structure Of Calcium Alginate And Cmc Molecules Intertwined In String Resulting In Local Vertical Absorption For Manangng Sloughy Wounds With Cavity , 15*15 Cm Non Adhesive Antimicrobial Highly Absorbant Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteriaproof Semi Permeable Release Profile Iconic Silver Upto Seven Days And Kills >99.9% Of The Tested Bacteria And Fugi For Up To 7 Days Unique 3D Fit Foam To Fill Gap By Conforms Upto 2 Cm To Wound Bed For Superior Absorption For Managing High To Moderate Exuding Infected Chronic Wounds , 10*10 Cm Adhesive Antimicrobial, Highly Absorbent Foam Dressing With Semi Pemeable Polyurethane Top Layer Which Water Proof And Bacteriaproof Patented Released Profile Of Iconic Silver Upto 7 Days And Kills >99.9% Of The Tested Bacteria Nad Fungi For Upto 7 Day Unique 3D Fit Foam To Fill Gap By Conforms Upto 2 Cm To Wound Bed For Superior Absorption For Managing High To Moderate Exuding Infected Chronic Wounds , 17*17 Cm Highly Absorbent Polyurathane Foam Dressing With Hydrocolloid Adhesive Border For Moderate To Highly Exuding Wounds Unique 3D Fit Foam Structure (Conforms To The Wound Bed,Absorbs Vertically,Retains Exudate)For Superior Absorption , Waterproof And Bacteria Proof Semi Permeable Polyurethane Top Film,Uniquely Shaped Design With Grooves To Ensure Close Fit To Rectum With Dual Positioning , 15 Gm Hydrogel Consisting Of Natural Ingredients Such As 96 % Highly Purified Water, Sodium Carboxy Methylcellulose And Calcium Alginate Without Any Additives For Effective And Gentle Autolytic Debridement Of Necrotic Tissue Dry And Sloughy Necrotic Wound , Sterile Dehydrated Human Amnion Chorion Membrane Allograft , Sterile Dehydrated Human Amnion Chorion Membrane Allograft With 0.5% Polyhexamethylene Biguanide , Sterile Dehydrated Human Amnion Chorion Membrane Allograft With 0.5% Polyhexamethylene Biguanide , Sterile Dehydrated Human Amnion Chorion Membrane Powder With 0.5% Polyhexamethylene Biguanide , Sterile Dehydrated Human Amnion Umbilical Cord Derived Membrane Allograft , Silk Protein Based Sterile Surgical Pu Foam Dressing (20Cm X20cm Adhesive) , Silk Protein Based Antimicrobial Wound Healing Ointment Loaded With Asiaticoside And Silver 25Gm , Silk Protein And Nano Silver Based Microbial Sterile Surgical Wound Dressing Dusting Powder 100Gm Bottle , Centella Asiatica Extract Based Skin Moisturization And Antiscar Gel 30 Gm / Ml , Silk Protein Based Sterile Surgical Particle Wound Dressing 10Ml Vial , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Particle Wound Dressing 10 Ml Vial , Silk Protein And Nanocrystalline Silver Based Sterilenon Adherent Antimicrobial Gauze Dressing 10X10 Cm , Silk Protein And Nanocrystalline Silver Based Sterilenon Adherent Antimicrobial Gauze Dressing 10X25 Cm , Silk Protein And Asiaticoside And Povidone Iodine Based Broad Spectrum Topical Antiseptic And Antimicrobial Wound Healing Ointment 100Gm , Papain Urea And Silk Protein Based Wound Debriding Ointment And Cream 50 Gm , Amorphous Silver And Silk Protien Hydrogel Wound Dressing 100Gm , Adhesive 4 Layer Foam And Hydrofibre Dressing With Viral Bacterial Barrier Polyurethane Top Layer With 1.2% Impregnated Ionic Silver And Gel Foaming Technology 10X10 Cm , Adhesive 4 Layer Foam And Hydrofibre Dressing With Viral Bacterial Barrier Polyurethane Top Layer With 1.2% Impregnated Ionic Silver And Gel Foaming Technology 21X21 Cm , Adhesive 4 Layer Foam And Hydrofibre Dressing With Viral Bacterial Barrier Polyurethane Top Layer With 1.2% Impregnated Ionic Silver And Gel Foaming Technology 17.5X17.5 Cm , Quill Pdo 2 Violet 20Cm Ct-1Tapper Point Half Circle 36 Mm Unidirectional , Quill Pdo 2 Violet 45Cm Ct-1Tapper Point Half Circle 36 Mm Unidirectional , Bakri Balloon , Absorbable Unidirectional Knotless Tissue Control Tissue Control Device, Symmetric Anchoring Pattern With 5 Anchors/Cm,Triclosan Coated Polydioxanone With Fixation Tab,Size 2-0,36Mm 1/2 Circle Taper Point Needle,45 Cm , Suction Cannula No. 20 (Tip Suction) , Picc Line (Polyurethane Catheter With Stylet) For Premature Babies, G-28, L- 20Cm, Fr-1, Integrated Extension Tube 8 Cm, With Splitting Needle (Fda Approved) , Picc Line (Polyurethane Catheter) For Premature Babies, With Peelable Cannula, Easy Lock, G-24, L- 30Cm, Fr-2 (Fda Approved) , Pe Neonatal Heat Loss Prevention Bag. Polyethylene Double Layer Occlusive Suit With Pre-Shaped Foam Cushion With Adjustable Hood To Prevent Heat Loss. Made Up Of Polyethelyne, Inner Layer 30 Micron, Outer Layer 50 Micron. Velcro Closure Above Chest For Easy Intervention. Size - Small, Medium And Large , Pur Umbilical Artery Catheter Radiopaque And Transparent With Pe 2 Way Stop Cock With Two Colour Code. Size Fr-2.5 Length-30 Cm Numerical Marking From 4 To 25Cm. , Pur Umbilical Artery Catheter Radiopaque And Transparent With Pe 2 Way Stop Cock With Two Colour Code. Size Fr- 3.5 Length-30 Cm Numerical Marking From 4 To 25Cm. , Paediatric Double Lumen Polyurethane Cvc Line, 3 Fr, L- 6Cm, 10Cm,15Cm, , Surfactant Delivery Tube Semi-Rigid Bendable 20Cm 6Fr, 2Cm Black Color Distal Tip With 30 Degree Angle To Ensure Accuracy And Ease Of Placement , Triple-Lumen Vascular Access Device Lumen With 2 Anti-Reflux Valve And 1 Without Anti Reflux Which Allow Administration Of Multiple Simultaneous Infusions. Pur Extension Length 8Cm. , Paediatric 1.2 Micron Charged Polysulphon 24 Hr Tpn Filter, Air Eliminating Filter- Flow Rate-136Ml/Min , Single Lumen Peripheral Catheter In Polyurethane For Short To Mid Term Peripheral Venous Access (Up To 29 Days). Compatible With Pressure Injection. This Catheter Is Inserted By Seldinger Technique. Peel-Pouch Containing: • 1Polyurethane Catheter With Integrated Extension Line And Rounded Tip 2Fr 20Cm(22G) 1 Puncture Needle 21G - 4.5Cm • 1 Nitinol J Guidewire(0.46Mm) 50 Cm • 1 Green Sticker “Midline Peripheral // Max Xml/S, Max. Xxx Psi (Xx , Ecg Roll Mindray Model Bebe Heart R3 , Laryngoscope With Blade Adult , Laryngoscope With Blade Pead , Laryngoscope With Blade Neonatal , Nasal Prongs Neonatal , Ecg Roll For Machine Make Of Nihon Kodean Series 3150 , Ecg Roll For Nst Machine Make Of Bionet Fc 1400
Contract Date: May 24, 2024 Contract Value : ₹ 12.80 Crore
Local Bodies No of Bidders 19
Maharashtra View Result →
44.
Housing Urban and Rular Development #2702650 AOC
Various Mow / Sr / Deposit Work In Sect.No 21 Under Rtc Sub Dn, Pwd Bhopal. 1.2 Transportation By Manual Labour Including Loading, Unloading And Stacking For Lead Up To 50 Metre. 1.2.1 Lime, Moorum, Building Rubbish 1.2.2 Earth 1.2.3 Manure Or Sludge 1.2.4 Excavated Rock 1.2.5 Sand, Stone Aggregate Below 40Mm Nominal Size 1.2.6 Stone Aggregate 40Mm Nominal Size And Above 1.2.7 Stone Soling 1.2.8 Bricks 1.2.9 S.W. Pipes 1.2.9.1 100 Mm Dia 1.2.9.2 150 Mm Dia 1.2.9.3 200 Mm Dia 1.2.9.4 250 Mm Dia 1.2.9.5 300 Mm Dia 1.2.9.6 350 Mm Dia 1.2.9.7 400 Mm Dia 1.2.9.8 450 Mm Dia 1.2.9.9 500 Mm Dia 1.2.9.10 600 Mm Dia 1.2.10 R.C.C. Pipes, Steel Cylinder, R.C. Pipes, C.I. Pipes, And Reinforced Cement Pipes 1.2.10.1 100 Mm Dia 1.2.10.2 125 Mm Dia 1.2.10.3 150 Mm Dia 1.2.10.4 200 Mm Dia 1.2.10.5 250 Mm Dia 1.2.10.6 300 Mm Dia 1.2.10.7 350 Mm Dia 1.2.10.8 400 Mm Dia 1.2.10.9 450 And 500 Mm Dia 1.2.10.10 600, 700, 750 And 800 Mm Dia 1.3 Add Extra For Every Additional Lead Of 50 Metre Or Part Thereof. 1.3.1 Lime, Moorum, Building Rubbish 1.3.2 Earth 1.3.3 Manure Or Sludge 1.3.4 Excavated Rock 1.3.5 Sand, Stone Aggregate Below 40Mm Nominal Size 1.3.6 Stone Aggregate 40Mm Nominal Size And Above 1.3.7 Stone Soling 1.3.8 Bricks 1.3.9 S.W. Pipes 1.3.9.1 100 Mm Dia 1.3.9.2 150 Mm Dia 1.3.9.3 200 Mm Dia 1.3.9.4 250 Mm Dia 1.3.9.5 300 Mm Dia 1.3.9.6 350 Mm Dia 1.3.9.7 400 Mm Dia 1.3.9.8 450 Mm Dia 1.3.9.9 500 Mm Dia 1.3.9.10 600 Mm Dia 1.3.10 R.C.C. Pipes, Steel Cylinder, R.C. Pipes, C.I. Pipes, And Unreinforced Cement Pipes 1.3.10.1 100 Mm Dia 1.3.10.2 125 Mm Dia 1.3.10.3 150 Mm Dia 1.3.10.4 200 Mm Dia 1.3.10.5 250 Mm Dia 1.3.10.6 300 Mm Dia 1.3.10.7 350 Mm Dia 1.3.10.8 400 Mm Dia 1.3.10.9 450 And 500 Mm Dia 1.3.10.10 600, 700, 750 And 800 Mm Dia 2.1 Surface Dressing Of The Ground Including Removing Vegetation And In- Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M. In All Kinds Of Soil. 2.2 Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared. 2.3 Clearing Grass And Removal Of The Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared. 2.4 Felling Trees Of The Girth ( Measured At A Height Of 1 M Above Ground Level ) Including Cutting Of Trunks And Branches Removing The Roots And Stacking Of Serviceable Material And Disposal Of Unserviceable Material. 2.4.1 Beyond 30 Cm Girth Up To And Including 60 Cm Girth 2.4.2 Beyond 60 Cm Girth Up To And Including 120 Cm Girth 2.4.3 Beyond 120 Cm Girth Up To And Including 240 Cm Girth 2.4.4 Above 240 Cm Girth 2.5 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M Lead And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed, All Kinds Of Soil 2.6 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30Cm In Depth. 1.5M In Width As Well As 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottom Disposal Of Excavated Earth, Lead Up To 50M And Lift Up To 1.5M, Disposed Earth To Be Levelled And Neatly Dressed. ( No Extra Lift Is Payable If Work Is Done By Mechanical Means ) All Kinds Of Soil 2.7 Earth Work In Excavation / By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5M In Width As Well As 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottom Disposal Of Excavated Earth, Lead Up To 50 M And Lift Up To 1.5 M, Disposed Earth To Be Levelled And Neatly Dressed. 2.7.1 Ordinary Rock 2.7.2 Hard Rock ( Requiring Blasting ) 2.7.3 Hard Rock ( Blasting Prohibited ) 2.8 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. ( No Extra Lift Is Payable If Work Is Done By Mechanical Means ) 2.8.1 Ordinary Rock 2.8.2 Hard Rock ( Requiring Blasting ) 2.8.3 Hard Rock ( Blasting Prohibited ) 2.9 Excavating Trenches Of Required Width For Pipes, Cables, Etc. Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Up To 1.5 M Including Getting Out Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M : ( No Extra Lift Is Payable If Work Is Done By Mechanical Means ) In All Kinds Of Soil 2.9.1 Pipes, Cables Etc., Not Exceeding 80 Mm Dia. 2.9.2 Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia. 2.9.3 Pipes, Cables Etc. Exceeding 300 Mm Dia But Not Exceeding 600 Mm. 2.10 Extra For Excavating Trenches For Pipes, Cables Etc. In All Kinds Of Soil For Depth Exceeding 1.5 M, But Not Exceeding 3 M. ( Rate Is Over Corresponding Basic Item For Depth Up To 1.5 Metre ) . 2.11 Extra For Excavating Trenches For Pipes, Cables, Etc., In All Kinds Of Soil For Depth Exceeding 3 M In Depth, But Not Exceeding 4.5 M. ( Rate Is Over Corresponding Basic Item For Depth Up To 1.5 Metre. ) 2.12 Excavating Trenches Of Required Width For Pipes, Cables, Etc., Including Excavation For Sockets, Depth Up To 1.5 M Including Including Consolidating Each Deposited Layers By Ramming, Watering Etc. Stacking Serviceable Material For Measurements And Disposal Of Unserviceable Material As Directed, Within A Lead Of 50M : 2.12.1 Ordinary Rock : 2.12.1.1 Pipes, Cables Etc. Not Exceeding 80 Mm Dia. 2.12.1.2 Pipes, Cables Etc. Exceeding 80 Mm Dia But Not Exceeding 300 Mm Dia. 2.12.1.3 Pipes, Cables Exceeding 300 Mm Dia But Not Exceeding 600Mm Dia 2.12.2 Hard Rock ( Requiring Blasting ) 2.12.2.1 Pipes, Cables Etc. Not Exceeding 80 Mm Dia. 2.12.2.2 Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia. 2.12.2.3 Pipes, Cables Etc. Exceeding 300 Mm Dia But Not Exceeding 600Mm Dia 2.12.3 Hard Rock ( Blasting Prohibited ) 2.12.3.1 Pipes, Cables Etc. Not Exceeding 80 Mm Dia. 2.12.3.2 Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia. 2.12.3.3 Pipes, Cables Etc. Exceeding 300 Mm Dia But Not Exceeding 600Mm Dia. 2.13 Extra For Excavating Trenches For Pipes, Cables, Etc. In Ordinary / Hard Rock Exceeding 1.5 M In Depth But Not Exceeding 3 M. ( Rate Is Over Corresponding Basic Item For Depth Up To 1.5 Metre. ) 2.14 Extra For Excavating Trenches For Pipes, Cables, Etc. In Ordinary / Hard Rock Exceeding 3M In Depth But Not Exceeding 4.5 M. ( Rate Is Over Corresponding Basic Item For Depth Up To 1.5 Metre. ) 2.15 Close Timbering In Trenches Including Strutting, Shoring And Packing Cavities ( Wherever Required ) Complete. ( Measurements To Be Taken Of The Face Area Timbered ) . 2.15.1 Depth Not Exceeding 1.5 M. 2.15.2 Depth Exceeding 1.5 M But Not Exceeding 3 M. 2.15.3 Depth Exceeding 3 M But Not Exceeding 4.5 M. 2.16 Close Timbering In Case Of Shafts, Wells, Cesspits, Manholes And The Like Including Strutting, Shoring And Packing Cavities ( Wherever Required ) Etc. Complete. ( Measurements To Be Taken Of The Face Area Timbered ) . 2.16.1 Depth Not Exceeding 1.5 M. 2.16.2 Depth Exceeding 1.5 M But Not Exceeding 3 M. 2.16.3 Depth Exceeding 3 M But Not Exceeding 4.5 M. 2.17 Close Timbering Over Areas Including Strutting, Shoring And Packing, Cavities ( Wherever Required ) Etc. Complete. ( Measurements To Be Taken Of The Face Area Timbered ) : 2.17.1 Depth Not Exceeding 1.5 M. 2.17.2 Depth Exceeding 1.5 M But Not Exceeding 3 M. 2.17.3 Depth Exceeding 3 M But Not Exceeding 4.5 M. 2.18 Extra For Planking, Strutting And Packing Materials For Cavities ( In Close Timbering ) If Required To Be Left Permanently In Position. ( Face Area Of Timber Permanently Left To Be Measured ) . 2.23 Extra Rates For Quantities Of Works, Executed: 2.23.1 In Or Under Water And / Or Liquid Mud, Including Pumping Out Water As Required. 2.23.2 In Or Under Foul Position, Including Pumping Out Water As Required. Note: - The Extra Percentage Rate Is Applicable In Respect Of Each Item But Limited To Quantity Executed In Difficult Conditions. The Depth Shall Be Reckoned Correct To 0.1 Metre. 0.05 Metre Or More Shall Be Taken As 0.1 Metre And Less Than 0.05 Metre Ignored. 2.24 Filling Available Excavated Earth ( Excluding Hard Rock / Ordinary Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. 2.25 Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation. ( No Extra Lift Is Payable If Work Is Done By Mechanical Means ) 2.25.1 All Kinds Of Soil. 2.25.2 Ordinary Or Hard Rock. 2.26 Supplying And Filling In Plinth With Crusher Stone Dust / Coarse Sand Under Floors Including, Watering, Ramming And Compacting In Layers Not Exceeding 20Cm In Depth And Dressing Complete Note: - Maximum Thickness Of This Layer Shall Be 20 Cm. 2.27 Supplying And Filling In Plinth Under Floors Including Watering Ramming Consolidating In Layers Not Exceeding 20Cm In Depth And Dressing Complete. 2.27.1 With Hard Muram Having Cbr >12 % At Under Floors Including Watering, Ramming And Compacting ( Minimum Compaction 95% Of Mdd ) In Layers Not Exceeding 20Cm In Thickness And Dressing Complete. ( Note:- Maximum Thickness Of This Layer To Be Provided Shall Be 30Cm ) 2.27.2 Supplying And Filing In Plinth With Soil ( Other Then Bc Soil ) Having Mdd Not Less Than 1.85 T / M3 Under Floors Including Watering, Ramming And Compacting ( Minimum Compaction 95% Of Mdd ) In Layers Not Exceeding 15Cm Depth And Dressing Complete. 2.28 Excavating Holes More Than 0.10 Cum & Upto 0.5 Cum Including Getting Out The Excavated Soil, Then Refiling The Soil As Required In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering Etc., Disposing Of Surplus Excavated Soil; As Directed Within A Lead Of 50 M And Lift Upto 1.5M. 2.28.1 All Kinds Of Soil. 2.28.2 Ordinary Rock 2.28.3 Hard Rock ( Requiring Blasting ) 2.28.4 Hard Rock ( Blasting Prohibited ) 2.29 Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified. ( Chlorpyriphos / Lindane Emulsifiable Concentrate Of 20% ) 2.30 Diluting And Injecting Chemical Emulsion For Post- Constructional Anti-Termite Treatment ( Excluding The Cost Of Chemical Emulsion ) : 2.30.1 Along External Wall Where The Apron Is Not Provided Using Chemical Emulsion @ 7.5 Liters / Sqm Of The Vertical Surface Of The Substructure To A Depth Of 300 Mm Including Excavation Channel Along The Wall And Rodding Etc. Complete, With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration. 2.30.2 Along The External Wall Below Concrete Or Masonry Apron Using Chemical Emulsion @ 2.25 Litres Per Linear Metre Including Drilling And Plugging Holes Etc. With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration. 2.30.3 Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diametre Holes And Plugging With Cement Mortar 1 :2 ( 1 Cement : 2 Sand ) To Match The Existing Floor, With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration. 2.30.4 Treatment Of Existing Masonry Using Chemical Emulsion @ One Litre Per Hole At 300 Mm Interval Including Drilling 10Mm Dia And 200Mm Deep Holes At 45 Degree And Plugging Them With Cement Mortar 1:2 ( 1 Cement : 2 Sand ) To The Full Depth Of The Hole, With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration. 2.30.5 Treatment At Points Of Contact Of Wood Work By Chemical Emulsion Chlorpyriphos / Lindane ( In Oil Or Kerosene Based Solution ) @ 0.5 Litres Per Hole By Drilling 6 Mm Dia Holes At Downward Angle Of 45 Degree At 150 Mm Centre To Centre And Sealing The Same. 2.31 Deduct For Disposed Soil Not Levelled And Neatly Dressed. 2.32 Preconstruction Antitermite Treatment To The Building Under Construction By Providing.Stage 1: Treatment Should Not Be Carried Out When It Is Raining Or When Soil Is Wet With Rain Or Subsoil Water. This Also Applies To Fill Up Soil Within The Plinth Area Before Laying The Subgrade For Flooring. 2.33 Making Bore Holes For Providing Dowel Bars At Designed Depth In Rock Foundation By Drilling 40 Mm Dia Bore Hole In Rock Including Necessary Bending Hooking, In Position And Grouting With Cement Slurry Etc. Complete As Per Drawing And Specification. ( Steel To Be Paid Separately ) . 2.34 Excavation In Soil Using Hydraulic Excavator And Including Cutting And Loading In Tippers, Trimming Bottom And Side Slopes In Accordance With Requirements Of Lines, Grades And Cross- Section, And Transporting To The Appropriate Ground Contour, Location And Levelling And Dressing Earth Neatly With All Lifts And Lead Upto 1000 Metre. 2.35 Earth Work In Rough Excavation By Any Means And Banking Filling Excavated Earth In Layers Not Exceeding 20Cm In Depth, Breaking Clods, Watering Rolling Each Layer With 1 / 2 Tonne In Embankments For Roads, Flood Banks, Marginal Bank And Guide Bank Of Filling Up Ground Depression Within Campus, Lead Upto 50M And All Lift. All Kinds Of Soil. 2.36 Banking Filling Excavated Earth In Layers Not Exceeding 20Cm In Depth, Breaking Clods, Watering Rolling Each Layer With 1 / 2 Tonne Roller Or Wooden Or Steel Rammers Etc. And Rolling Every 3Rd And Top-Must Layer With Power Roller Of Minimum 8 Tonnes And Dressing Up, In Embankments For Roads, Flood Banks, Marginal Bank And Guide Bank Etc. Lead Upto 50M And Lift Upto 1.5M. All Kinds Of Soil. 2.37 Deduct For Not Rolling With Power Roller Of Minimum 8 Tonnes For Banking Filling Excavated Earth In Layers Not Exceeding 20Cm In Depth. 2.38 Deduct For Not Watering With The Excavated Earth For Banking Filling 2.39 Providing And Laying Of Permanent Piping Technology Anti-Termite Treatment Before Flooring Work By Installing Lldp ( Low Linear Density Polyethylene ) Tube Of 8 Mm O.D. & 6.4 Mm I.D.With Inbuilt Pressure Compensation Chip At Every 30 Cm Interval In The Tube, . The Contractor Shall Submit Approved Line Plan For Piping System And Junction Boxes Dully Approved By Engineer-In- Charge With Bond Of 5 Year Warranty. 2.39.1 Permanent Piping System With Junction Boxes 2.39.2 Anti-Termite Chemical Injected Area 2.40 Ploughing The Existing Ground To A Depth Of 15 Cm To 25 Cm And Watering The Same. ( All Kinds Of Soil ) 3.1 Cement Mortar 1:1 ( 1 Cement: 1 Sand ) 3.2 Cement Mortar 1:2 ( 1 Cement: 2 Sand ) . 3.3 Cement Mortar 1:3 ( 1 Cement: 3 Sand ) . 3.4 Cement Mortar 1:4 ( 1 Cement: 4 Sand ) . 3.5 Cement Mortar 1:5 ( 1 Cement: 5 Sand ) . 3.6 Cement Mortar 1:6 ( 1 Cement: 6 Sand ) . 3.7 Cement Mortar 1:2 ( 1 Cement: 2 Stone Dust ) . 3.8 Cement Mortar 1:2 ( 1 Cement: 2 Marble Dust ) . 3.9 White Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) . 3.10 Cement Mortar 1:5 ( 1 Cement: 5 Marble Dust ) . 3.11 White Cement Mortar 1:3 ( 1 White Cement: 3 Marble Dust ) . 3.12 White Cement Mortar 1:5 ( 1 White Cement: 5 Marble Dust ) . 3.13 Mortar In Lime , Surkhi ( 50% Red And 50% Light Yellow ) And Marble Dust 1:1.5:0.5 4.1 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Upto Plinth Level : 4.1.1 With 20Mm Nominal Size Graded Stone Aggregate. 4.1.1.1 M-25 – Grade Concrete 4.1.1.2 M-20 – Grade Concrete 4.1.1.3 M-15 – Grade Concrete 4.1.1.4 M-10Nominal ( Mix-1 Cement : 3 Sand : 6 Graded Stone Aggregate ) 4.1.2 With 40Mm Nominal Size Graded Stone Aggregate. 4.1.2.1 M-15 - Grade Concrete 4.1.2.2 M-10 Nominal ( Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate ) 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 Sand : 8 Graded Stone Aggregate 4.1.3 With Fly Ash. 4.1.3.1 1:2:3½:9 ( 1 Ordinary Portland Cement : 2 Fly Ash : 3½ Sand: 9 Graded Stone Aggregate 40 Mm Nominal Size ) 4.1.3.2 1:2½:4:11 ( 1 Ordinary Portland Cement : 2½ Fly Ash : 4 Sand : 11 Graded Stone Aggregate 40 Mm Nominal Size ) Note: No Fly Ash Is To Be Added To Portland Pozzolona Cement In Any Case Which Itself Contains Fly Ash. 4.2 Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc. Upto Floor Two Level, Excluding The Cost Of Centering, Shuttering And Finishing : 4.2.1 With 20Mm Nominal Size Graded Stone Aggregate 4.2.1.1 M-25 – Grade Concrete 4.2.1.2 M 20 – Grade Concrete 4.2.1.3 M 15 – Grade Concrete 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate 4.2.2 With 40Mm Nominal Size Graded Stone Aggregate 4.2.2.1 M-15 - Grade Concrete 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate 4.3 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For : 4.3.1 Upto Plinth: Foundations, Footings, Bases For Columns, Plinth Beams, Curtain Walls, Columns Below Plinth. 4.3.2 Above Plinth: Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, And String Courses Fillets Etc. 4.3.3 Above Plinth: Columns, Pillars, Posts And Struts. 4.4 Providing And Laying Cement Concrete In Kerbs, Steps And The Like At Or Near Ground Level Excluding The Cost Of Centering, Shuttering And Finishing . 4.4.1 M-15 ( With 20Mm Nominal Size Graded Stone Aggregate ) 4.4.2 M-10 ( With 20Mm Nominal Size Graded Stone Aggregate ) Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate 4.5 Providing And Fixing At Or Near Ground Level Precast Cement Concrete In Kerbs, Edgings Etc. As Per Approved Pattern And Setting In Position With Cement Morta1:3 ( 1 Cement : 3 Sand ) On Exposed Surfaces Complete. ( With 20Mm Nominal Size Graded Stone Aggregate ) 4.6 Providing And Fixing Upto Floor Two Level Precast Cement Concrete String Or Lacing Courses, Copings, Bed Plates, Anchor Blocks, Plain Window Sills, Shelves, Louvers, Steps, Stair Cases, Etc. Including Cost Of Required Centering, Shuttering And Finishing Smooth With 6Mm Thick Cement Plaster 1:3 ( 1 Cement : 3 Sand ) On Exposed Surfaces Complete. 4.6.1 M-25 ( With 20Mm Nominal Size Graded Stone Aggregate ) 4.6.2 M-20 ( With 20Mm Nominal Size Graded Stone Aggregate ) 4.6.3 M-15 ( With 20Mm Nominal Size Graded Stone Aggregate ) 4.6.4 M-10 ( With 20Mm Nominal Size Graded Stone Aggregate ) Nominal Mix -1 Cement: 3 Sand: 6 Graded Stone Aggregate. 4.7 Providing And Fixing Upto Floor Two Level Precast Cement Concrete Solid Block Including Hoisting And Setting In Position With 6Mm Thick Cement Plaster 1:3 ( 1 Cement : 3 Sand ) On Exposed Surfaces Complete : 4.7.1 M-15 ( With 20Mm Nominal Size Graded Stone Aggregate ) 4.7.2 M-10 ( M 10 ) ( With 20Mm Nominal Size Graded Stone Aggregate ) Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate 4.8 Providing And Fixing Upto Floor Two Level Pre Cast Concrete Hollow Block Including Hoisting And Setting In Position With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) , Cost Of Required Centering, Shuttering And Finishing Smooth With 6Mm Thick Cement Plaster 1:3 ( 1 Cement : 3 Sand ) On Exposed Surfaces Complete. 4.8.1 M-15 ( With 20Mm Nominal Size Graded Stone Aggregate ) 4.8.2 M-10 ( With 20Mm Nominal Size Graded Stone Aggregate ) Nominal Mix -1 Cement: 3 Sand: 6 Graded Stone Aggregate. 4.9 Add Extra For Item No. 4.6, 4.7 And 4.8 Above Floor Two Level For Every Additional Floor Or Part There Of 4.10 Providing And Laying Damp-Proof Course 40Mm Thick With Cement Concrete 1:2:4 ( 1 Cement: 2 Sand: 4 Graded Stone Aggregate 12.5Mm Nominal Size ) . 4.11 Providing And Laying Damp-Proof Course 50Mm Thick With Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) . 4.12 Extra For Providing And Mixing Water Proofing Material As Per Is Standard In Cement Concrete Work Quantity As Prescribed By The Manufacturer. 4.13 Applying A Coat Of Residual Petroleum Bitumen Of Penetration 80 / 100 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With A Piece Of Cloth Lightly Soaked In Kerosene Oil. 4.14 Extra For Concrete Work In Superstructure Above Floor Two Level For Each Floors Or Part Thereof 4.15 Extra For Laying Concrete In Or Under Water And / Or Liquid Mud Including Cost Of Pumping Or Bailing Out Water And Removing Slush Etc. Complete. Note For Item No. 4.15:- The Quantity Will Be Calculated By Multiplying. The Depth Of Centre Of Gravity Shall Be Reckoned Correct To 0.1M. 0.05M Or More Shall Be Taken As 0.1M And Less Than 0.05M Ignored. 4.16 Extra For Laying Concrete In Or Under Foul Positions. 4.17 Making Plinth Protection 50Mm Thick Of Cement Concrete Grade M10 Over 75Mm Bed Of Dry Metal Ballast 40Mm Nominal Size Well Rammed And Consolidated And Filled With Sand Including Finishing The Top Smooth ( With 20Mm Nominal Size Graded Stone Aggregate. ) 4.18 Extra For Addition Of Synthetic Polyester Triangular Fiber Of Length 12 Mm, Effective Diameter 10-40 Microns And Specific Gravity Of 1.34 To 1.40 In Cement Concrete / Rcc / Flooring / Water Retaining Structures By Using 125 Gms Of Synthetic Polyester Triangular Fibre For 50 Kgs Cement Used As Per Directions Of Engineer-In- Charge. 4.19 Precasting And Placing In Position 125 Mm Dia Bollards 600 Mm High Of Required Shape Including Providing M.S. Pipe Welded At Bottom And Embedded 150Mm In Cement Concrete 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Including Necessary Excavation Of Size 250X250x450mm Deep For The Same In Bitumen / Concrete Pavement At Specified Spacing. 4.20 Providing And Fixing Up To Floor Two Level Precast Cement Concrete String Or Lacing Courses, Copings, Bed Plates, Anchor Blocks, And Setting In Position With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Cost Of Required Centering Complete. 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20Mm Nominal Size ) 4.21 Providing And Fixing Up To Floor Two Level Precast Cement Concrete Solid Block, Including Hoisting And Setting In Position With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Cost Of Required Centering, Shuttering Complete . 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20Mm Nominal Size ) 4.22 Providing And Fixing Up To Floor Two Level Precast Cement Concrete Hollow Block, Including Hoisting And Setting In Position With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Cost Of Required Centering, Shuttering Complete. 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20Mm Nominal Size ) 4.23 Providing And Laying In Position Ready Mixed Plain Cement Concrete, Using Fly Ash And Cement Content As Per Approved Design Curing, Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate / Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer-In-Charge. Note : ( 1 ) Fly Ash Conforming To Grade I Of Is 3812 ( Part-1 ) Only Be Used As Part Replacemen To Be Ensured In Accordance With Clauses 5.2 And 5.2.1 Of Is: 456 -2000 In The Items Of Bmc And Rmc. 4.23.1 All Works Up To Plinth Level: 4.23.1.1 M-15 Grade Plain Cement Concrete ( Cement Content Considered @ 240 Kg / Cum ) 4.23.1.2 M-10 Grade Plain Cement Concrete ( Cement Content Considered @ 220 Kg / Cum ) 4.23.2 All Works Above Plinth And Upto Floor Two Level 4.23.2.1 M-15 Grade Plain Cement Concrete ( Cement Content Considered @ 240 Kg / Cum ) 4.23.2.2 M-10 Grade Plain Cement Concrete ( Cement Content Considered @ 220 Kg / Cum ) 4.24 Providing And Laying In Position Ready Mixed Plain Cement Concrete, With Cement Content As Per Approved Design Mix And Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work Cost Of Centering, Shuttering And Finishing, Including Cost Of Curing, Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate / Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer-In- Charge. 4.24.1 All Works Up To Plinth Level: 4.24.1.1 M-15 Grade Plain Cement Concrete ( Cement Content Considered @ 240 Kg / Cum ) 4.24.1.2 M-10 Grade Plain Cement Concrete ( Cement Content Considered @ 220 Kg / Cum ) 4.24.2 All Works Above Plinth And Upto Floor Two Level 4.24.2.1 M-15 Grade Plain Cement Concrete ( Cement Content Considered @ 240 Kg / Cum ) 4.24.2.2 M-10 Grade Plain Cement Concrete ( Cement Content Considered @ 220 Kg / Cum ) 4.25 Plum Cement Concrete 1:2:4 With 75% Graded Metal Of Maximum Size 40 Mm And 25% Plum Of 150Mm Size. 4.26 Providing And Laying Cement Concrete In Sunken Floors Of Wc, Toilet, Wash Area, Etc With 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-3 ) : 10 Graded Stone Aggregate 40 Mm Nominal Size ) Excluding The Cost Of Centering And Shuttering 5.1 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete ( With 20Mm Nominal Size Graded Stone Aggregate ) Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 5.1.1 M-20 Grade Concrete 5.1.2 M-15 Grade Concrete 5.2 Reinforced Cement Concrete Work ( With 20 Mm Nominal Size Graded Stone Aggregate ) In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Posts And Struts Etc. Above Plinth Level And Upto Floor Two Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement: 5.2.1 M-20 Grade Concrete 5.3 Reinforced Cement Concrete Work ( With 20 Mm Nominal Size Graded Stone Aggregate ) In Beams, Suspended Floors, Roofs Having Slope Of Any Degree Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Staircases Above Plinth Level And Upto Floor Two Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement In Concrete Grade. 5.3.1 M-20 Grade Concrete 5.4 Providing And Laying Upto Floor Two Level Reinforced Cement Concrete ( With20 Mm Nominal Size Graded Stone Aggregate ) In Kerbs, Steps And The Like Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With Concrete Grade. 5.4.1 M-20 Grade Concrete 5.5 Reinforced Cement Concrete Work ( With 20 Mm Nominal Size Graded Stone Aggregate ) In Arches, Archribs, Domes, Vaults, Shells, Folded Plate Above Plinth Level And Upto Floor Two Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement In Concrete Grade. 5.5.1 M-20 Grade Concrete 5.6 Reinforced Cement Concrete Work ( With 20 Mm Nominal Size Graded Stone Aggregate ) In Chimneys, Shafts, Upto Floor Two Level Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 5.6.1 M-20 Grade Concrete 5.7 Reinforced Cement Concrete Work ( With 20 Mm Nominal Size Graded Stone Aggregate ) In Well-Steining Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 5.7.1 M-20 Grade Concrete 5.8 Reinforced Cement Concrete Work ( With 20 Mm Nominal Size Graded Stone Aggregate ) In Vertical And Horizontal Fins Individually Or Forming Box Louvers, Facias And Eaves Boards Up To Floor Two Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement In M 20 –Grade Concrete 5.9 Centering And Shuttering In Cluding Strutting, Propping Etc. And Removal Of Form For: 5.9.1 Foundations, Footings, Bases Of Columns, Etc. For Concrete Upto Plinth Level 5.9.2 Walls ( Any Thickness ) In Cluding Attached Pilasters Butter Esses, Plinth Beams And String Courses Etc. 5.9.2.1 Uptoplinthlevel. 5.9.2.2 Above Plinth Upto 3.6 M Height From Plinth Level 5.9.2.3 Extra For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De-Shuttering And Decentering At All Levels, Over A Height Of 3.6 M, For Every Additional Height Of 1 Metre Or Part Thereof. 5.9.3 Suspended Floors, Roofs, Landings, Balconies And Access Platform. 5.9.4 Shelves ( Cast In Situ ) 5.9.5 Lintels, Beams, Girders, Bressumers And Cantilevers 5.9.6 Columns, P I L L A R S , Piers, Abutments, Posts And Struts. 5.9.7 Stairs, ( Excluding Landings ) Except Spiral- Staircases. 5.9.8 Spiral Staircases ( Including Landing ) . 5.9.9 Arches, Domes, Vaults Upto 6M Span 5.9.10 Extra For Arches, Domes, Vaults Exceeding 6 M Span 5.9.11 Chimneys And Shafts 5.9.12 Coffer / Waffle Slab Of Any Size Or Shape As Shown In The Drawing. 5.9.13 Well Steining 5.9.14 Vertical And Horizontal Fins Individually Or Forming Box Louvers Band, Facias And Eaves Boards. 5.9.15 Extra For Shuttering In Circular Work Or Any Other Geometrical Shape ( 20% Of Respective Centering And Shuttering Items ) . 5.9.16 Small Lintels Not Exceeding 1.5M Clear Span, Mouldingas Incornices, Window, Sills, Courses, Bands, Copings, Bed Plates, Anchor Blocks And The Like. 5.9.17 Cornices And Mouldings 5.9.18 Small Surfaces Such As Cantilever Ends, Brackets And Ends Of Steps, Caps And Bases To Pilasters And Columns And The Like. 5.9.19 Weather Shade, Chajjas, Corbels Etc., Including Edges. 5.9.20 Suspended Floors, Roofs, Landings, Balconies And Access Platform. With Water Proof Ply 12 Mm Thick. ( Item To Be Executed With Prior Permission Of S.E. In Case Of B & R Works And From Additional Project Director In Case Of Piu Works ) 5.9.21 Lintels, Beams, Columns, Girders, Bressumers And Cantilevers With Waterproof Ply 12 Mm Thick ( Item To Be Executed With Prior Permission Of S.E. In Case Of B&R Works And From Additional Project Director In Case Of Piu Works ) 5.10 Extra For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De-Shuttering And Decentering At All Levels, Over A Height Of 3.6 M, For Every Additional Height Of 1 Metre Or Part Thereof ( Plan Area To Be Measured ) 5.10.1 Suspended Floors, Roofs, Landing, Beams And Balconies ( Plan Area To Be Measured ) . 5.11 Providing, Hoisting And Fixing Up To Floor Two Level Precast Reinforced Cement Concrete In Lintels, Manhole Cover, Shelves And Like Including Setting In Cement Mortar 1:3 ( 1 Cement : 3 Sand ) , Cost Of Required Centering, Shuttering And Finishing With Neat Cement Punning On Exposed Surfaces But Excluding The Cost Of Reinforcement With M 15 –Grade Concrete. 5.12 Providing Precast Cement Concrete Jali 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 6Mm Nominal Size ) Reinforced With 1.6 Mm Dia Mild Steel Wire Including Centering And Shuttering, Roughening Cleaning, Fixing And Finishing In Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Etc. Complete Excluding Plastering Of The Jambs, Sills And Soffits. 5.12.1 50 Mm Thick 5.12.2 40 Mm Thick 5.12.3 25 Mm Thick 5.13 Encasing Rolled Steel Sections, In Beams And Columns, With Cement Concrete M 15 ( 1 Cement: 2 Sand: 4 Graded Stone Aggregate 20Mm Nominal Size ) Including Centering And Shuttering Complete But Excluding Cost Of Reinforcement. 5.14 Encasing Rolled Steel Section In Grillages With Cement Concrete M 15 ( 1 Cement: 2 Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size ) Including Centering And Shuttering But Excluding Cost Of Expanded Metal And Hangers. 5.15 Extra For Providing And Fixing Expanded Metal Mesh Of Size 20X60mm And Strands 3.25Mm Wide 1.6Mm Thick Weighing 3.64 Kg Per Sqm For Encasing Of Rolled Steel Sections In Beams, Columns And Grillages Excluding Cost Of Hangers. 5.16 Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding Including Cost Of Binding Wire All Wastages And Overlaps, Couplers ( Overlaps Shall Be Provided As Per Requirement Of Is 13920 For Ductile Detaling Is 456 Rcc Design & Sp 34 Reinforcement Detailing ) Etc. Complete . ( Note:-1. Spacer Bars ( Chairs ) Shall Be Paid Separately As Shown In The Drawing And As Per Direction Of Engineer In Charge. 2. No Extra Payment Shall Be Done For Overlaps And / Or Couplers. 3.Couplers Shall Be Conforming To Is Code On “Reinforcement Couplers For Mechanical Splices Of Bars For Concrete Reinforcement - Specification” ) 5.16.1 Mild Steel And Medium Tensile Steel Bars. 5.16.2 Hard Drawn Steel Wire 5.16.3 Cold Twisted Bars ( Ctd ) 5.16.4 Hot Rolled Deformed Bars 5.16.5 Hard Drawn Steel Wire Fabric 5.16.6 Thermo-Mechanically Treated Bars. ( Tmt / Tmx ) Fe 500 Or More Conforming To Is 1786 5.17 Add Extra For Providing Reinforcement Above Floor Two Level For Every Additional Floor Or Part Thereof. 5.18 Providing And Fixing In Position Copper Plate As Per Design For Expansion Joints. 5.19 Providing And Filling In Position, Blown Bitumen In Expansion Joints. 5.20 Providing And Filling In Position Bitumen Mix Filler Of Proportion 80 Kg. Of Hot Bitumen, 1 Kg. Of Cement And 0.25 Cubic Metre Of Sand For Expansion Joints. 5.21 Providing And Filling Gap In Expansion Joint Between Rcc / Stone / Ceramic Tiles / Granite / Marble By Providing Silicon Sealant Over Backer Rod Of Approved Quality Weather Sealant As Per Drawing And Direction Of Engineer In Charge Up To 25Mm Width & 12 Mm Depth. 5.22 Providing And Fixing In Position Bitumen Impregnated Fibre Board Conforming To Is: 1838 Including Cost Of Primer, Sealing Compound In Expansion Joints. 5. 22.1 12 Mm Thick 5. 22.2 25 Mm Thick 5. 22.3 50 Mm Thick 5.23 Providing And Fixing Sheet Covering Over Expansion Joints With Iron Screws As Per Design. 5. 23.1 Non-Asbestos Fibre Cement Board 6 Mm Thick As Per Is: 14862. 5. 23.1.1 150Mm Wide. 5. 23.1.2 200Mm Wide. 5. 23.1.3 250Mm Wide. 5. 23.2 Aluminium Fluted Strips 3.15Mm Thick. 5. 23.2.1 150 Mm Wide. 5. 23.2.2 200 Mm Wide. 5. 23.2.3 250 Mm Wide. 5. 23.3 Stainless Steel Grade 304 Plate-1.0 Mm Thick 5. 23.3.1 150 Mm Wide. 5. 23.3.2 200 Mm Wide. 5. 23.3.3 250 Mm Wide. 5.24 Providing For Plaster Drip Course / Groove In Plastered Surface Or Moulding To R.C.C. Projections. 5.25 Extra For Laying Reinforced Cement Concrete In Or Under Water And / Or Liquid Mud Including Cost Of Pumping Or Bailing Out Water And Removing Slush Etc., Complete. Note- For Item No. 5.25:-The Quantity Will Be Calculated By Multiplying The Depth Measured From The Subsoil Water Level Up To The Centre Of Gravity The Depth Of Centre Of Gravity Shall Be Reckoned Correct To 0.1 M. 0.05 M Or More Shall Be Taken As 0.1 M And Less Than 0.05 M Ignored. No Extra Payment Shall Be Made For Placing Reinforcement Or Centering & Shuttering Under Sub – Soil Water Condition 5.26 Extra For Laying Reinforced Cement Concrete In Or Under Foul Positions. 5.27 Providing And Laying In Position Machine Batched, Machine Mixed Cement Concrete ( Bmc ) Of M-25 Grade For Reinforced Cement Concrete Work Using Cement Content As Per Approved Mix Design Concrete Without Impairing Strength And Durability As Per Direction Of Engineer-In Charge And Pumping Of Concrete To Site Of Laying And Finishing But Excluding The Cost Of Centering, Shuttering, And Reinforcement. ( Note: - Minimum Cement Content Is 330 Kg / Cum ) And No Extra Payment For Extra Cement Used As Per Mix Design. 5.27.1 All Works Upto Plinth Level. 5.27.2 All Works Above Plinth Level And Upto Floor Five Level. 5.27.3 Add Extra For Each Floor For All Works Above Floor Five Level. 5.28 Extra For Providing Richer Mixes Of Bmc Design Mix As Per Item No 5.27 Upto Plinth Level And At All Floor Levels. ( No Extra Payment For Using Extra Cement As Per Requirement Of Mix Design. ) 5. 28.1 Providing M-30 Grade Concrete Instead Of M- 25 Grade. ( Note : Minimum Cement Content Is @ 340 Kg / Cum ) 5. 28.2 Providing M-35 Grade Concrete Instead Of M- 25 Grade. ( Note: : Minimum Cement Content Is @ 350 Kg / Cum ) 5. 28.3 Providing M-40 Grade Concrete Instead Of M- 25 Grade. ( Note: Minimum Cement Content Is @ 360 Kg / Cum ) 5.29 Providing And Placing In Position Precast Reinforced Cement Concrete Waffle Units Square Or Rectangular As Per Design And Shape For Floors And Roofs In M-20 –Grade Concrete ( With Graded Stone Aggregate 10Mm Nominal Size. Including Provision Of Steel Hooks For Lifting And Form Work, Handling, Hoisting, Centering And Erection Complete For All Floor Levels But Excluding The Cost Of Reinforcement. 5.30 Providing And Laying In Position Ready Mixed Concrete ( Rmc ) Of M-25 Grade For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix And Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer - In - Charge. Note: Minimum Cement Content Is @ 330 Kg / Cum. ( No Extra Payment For Using Extra Cement As Per Requirement Of Mix Design. ) 5.30.1 All Works Upto Plinth Level. 5.30.2 All Works Above Plinth Level And Upto Floor V Level. 5.30.3 Extra For Each Additional Floor For All Works Above Floor Five Level 5.31 Extra For R.C.C. Work Above Floor Two Level For Each Floors Or Part Thereof. ( Except Items 5.27 And 5.30 ) 5.32 Supplying And Applying Pre Tested And Approved Water Based Concrete Curing Compound To Concrete / Masonry Surface, All As Per Manufacturer’S Specification And Direction Of Engineer-In-Charge. 5.32.1 Non Pigmented Wet Curing Compound 5.32.2 Pigmented Wet Curing Compound. 5.33 Providing And Fixing In Position Factory Made Precast Rcc M-40 Doors, Windows And Ventilator Frames Having Excellent Smooth Finish, As Per Is: 6523 With 6Mm Dia Main Reinforcement Each Polymer Block Having At Least Four Holes For Passing One Or Adjacent Rebates To Hold Fast Grill Or Steel Bar, Ventilator Frame Provided With Grooves For Louvers At An Angel Of 45 Degree At Spacing To Block Direct Vision Etc. Complete, As Per The Direction Of Engineer-In-Charge. The Cost Of Hold Fast And Cement Concrete Block Of 1:3: 6 ( 1 Cement: 3 Sand: 6 Graded Stone Aggregate 20Mm Nominal Size ) Mix Is Also Included In The Item. 5. 33.1. Frame 125 Mmx 60 Mm ( Double Rebate ) 5. 33.2. Frame 100Mmx 60 Mm ( Single Rebate ) 5. 33.3 Frame 85Mmx 60 Mm ( Single Rebate ) 5.34 Smooth Finishing Of The Exposed Surface Of Rcc Work With 6Mm Thick Cement Mortar 1:3 ( 1 Cement: 3 Sand ) . 5.35 Providing And Fixing In Position Pre Moulded Compressible Filler Board Made From Polymer Base In Black Color Approved Make Conforming To The Specifications Having Minimum Density Of 95 Kg / Cum, Non- Staining, With Less Than 1 Percent Water Absorption And Compression Recovery Of 93 Percent Minimum Including Cost Of Double Sided Adhesive Tape, Sealant Etc. In Expansion Joints. 5. 35.1 12 Mm Thick 5. 35.2 25 Mm Thick. 5. 35.3 50 Mm Thick. 5.36 Providing And Sealing The Retaining Wall Expansion Joints With Anodized Aluminum Extruded Section Of 135 Mm × 3.1 Mm Confirm To Alloy Of 6063 T5 / T6including Fixing Of An Imported Epdm Moisture Barrier Conform To ( American Society For Testing And Materials ) 2240 & Astm - G53 & 84 Fixing With Epoxy Adhesive Confirm To Astm C-881 Complete In All Respect As Per Manufacturer Drawing And Specifications. With 5 Year Guarantee. 5.37 Providing And Fixing Sheet Covering Over Expansion Joints With Iron Screws As Per Design. Non- Asbestos Cement Bonded Particle Board 6 Mm Thick As Is: 14276 5.37.1 150Mm Wide 5.37.2 200Mm Wide 5.37.3 250Mm Wide 5.38 Providing & Laying In Position Prestressing Steel Strands ( Low Relaxation ) On Hollow Core Bed By Using Mechanical Pulling Arrangement Like Rabbit / Bed Master Including All Accessories For Stressing &Destressing Operations As Per Approved Make Conforming To Is1343 & Grade Fy-1860 Etc, Complete As Per Drawings And Direction Of Engineer -In- Charge. 5.39 Providing And Fixing Of Expansion Joint System Related With Floor Location As Per Drawings And Direction Of Engineer-In- Charge. The Joints System Will Be Of Extruded Aluminum Base Members, Self Aligning / Self Centering Arrangement And Support Plates Etc. Provision Of Moisture Barrier Membrane In The Joint System To Have Watertight Joint Is Mandatory Requirement All As Per The Manufactures Design And As Approved By Engineer - Incharge. ( Material Shall Confirm To Astm 6063 ) . 5. 39.1 Floor Joint Of 100 Mm Gap 5. 39.2 Floor Joint Of 150 Mm Gap 5. 39.3 Floor Joint Of 200 Mm Gap 5.40 Providing And Fixing Of Expansion Joint System Related With Wall Joint ( Internal / External ) Location As Per Drawings And Direction Of Engineer-In- Charge. The Joints Shall Be Of Extruded Aluminum Base Members, Self Aligning / Centering Amongst The Components Of The Joint System. The Joint System Shall Utilize Light Weight Aluminum Profiles Exhibiting Minimal Exposed Aluminum Surfaces Mechanically Snap Locking The Multicellular To Facilitate Movement. ( Material Shall Confirm To Astm 6063 ) . 5. 40.1 Wall Joint Of 100 Mm Gap 5. 40.2 Wall Joint Of 150 Mm Gap 5. 40.3 Wall Joint Of 200 Mm Gap 5.41 Providing And Fixing Of Expansion Joint System Of Approved Make And Manufactures For Various Roof Locations As Per Approved Drawings And Direction Of Engineer-In- Charge. The Joints Shall Be Of Extruded Aluminum Base Members With, Self Aligning And Self Centeringarragement Support Plates Asper Astm B221-02. . The Joint System Shall Resists Damage Or Deterioration From The Impact Of Falling Ice, Exposure To Uv, Airborne Contaminants And Occasional Foot Traffic From Maintenance Personnel. Provision Of Moisture Barrier Membrane In The Joint System To Have Water Tight Joint Is Mandatory Requirement. ( Material Shall Confirm To Astm 6063. ) 5.41.1 Roof Joint For 100 Mm Gap 5.41.2 Roof Joint For 150 Mm Gap 5.41.3 Roof Joint For 200 Mm Gap 5.42 Providing And Fixing Scaffolding Net Of Required Width Made Of High Density Polyethylene Uv Stabilized Knitted On Warp Knitting Machines Having Density 100Gm / Sqm And Shading Coefficient Minimum 75% Around The Construction Site / For Vertical Extension As Per Requirement Including Fastening / Tying With Building / Scaffolding Pipes Or With Any Other Fixtures Etc. Complete As Per Direction Of Engineer-In-Charge. ( One Time Payment Shall Be Made For Providing Scaffolding Net From Start Of Work Till Completion Of Work Including Shifting If Any. The Scaffolding Net Shall Be The Property Of The Contractor On Completion Of The Work ) 6.1 Brick Work With Well Burnt Chimney Bricks In Bulls Pattern Trench Kiln Manufactured By Ghol Process, Crushing Strength Not Less Than 40Kg / Cm2 And Water Absorption Not More Than 15% In Foundation And Plinth I / C Curing Etc. Complete. 6.1.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.1.2 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 6.2 Brick Work With Well Burnt Chimney Bricks In Bulls Patent Trench Kiln Manufactured By Ghol Process , Crushing Strength Not Less Than 40Kg / Cm2 And Water Absorption Not More Than 15% In Superstructure Above Plinth Level And Up To Floor Two Level I / C Curing Etc. Complete. 6.2.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.2.2 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 6.3 Brick Work With Well Burnt Chimney Bricks In Bulls Pattern Trench Kiln, Crushing Strength Not Less Than 25Kg / Cm2 And Water Absorption Not More Than 20% In Foundation And Plinth I / C Curing Etc Complete. 6.3.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.3.2 Cement Mortar 1:6 ( 1 Cement:6 Sand ) . 6.4 Brick Work With Well Burnt Chimney Bricks In Bulls Pattern Trench Kiln, Crushing Strength Not Less Than 25Kg / Cm2 And Water Absorption Not More Than 20% In Superstructure Above Plinth Level And Up To Floor Two Level I / C Curing Etc Complete. 6.4.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.4.2 Cement Mortar 1:6 ( 1 Cement:6 Sand ) . 6.5 Brick Work With Well Brunt Open Bhatta, Bricks, Crushing Strength Not Less Than 25Kg / Cm2 And Water Absorption Not More Than 20% In Foundation And Plinth I / C Curing Etc Complete. 6.5.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.5.2 Cement Mortar 1:6 ( 1 Cement: 6 Sand ) . 6.6 Brick Work With Well Brunt Open Bhatta, Bricks, Crushing Strength Not Less Than 25Kg / Cm2 And Water Absorption Not More Than 20% In Superstructure Above Plinth Level And Up To Floor Two Level I / C Curing Etc Complete. 6.6.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.6.2 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 6.7 Brick Work With Fly Ash Lime Bricks ( Falg Bricks ) Conforming To Is:12894-2002, In Super Structure Above Plinth Level Up To Floor Two Level In : 6.7.1 Having 100 Kg / Cm2 Average Compressive Strength. 6.7.1.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.7.1.2 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 6.7.2 Having 75 Kg / Cm2 Average Compressive Strength. 6.7.2.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.7.2.2 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 6.7.3 Having 50 Kg / Cm2 Average Compressive Strength. 6.7.3.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.7.3.2 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 6.8 Brick Work With Calcium Silicate Bricks Machine Moulded Conforming To Is:4139, Having 100 Kg / Cm2 Average Compressive Strength In Super Structure Above Plinth Level Upto Floor Ii Level In : 6.8.1 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.8.2 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 6.9 Brick Work With Extruded Burnt Fly Ash Clay Sewer Bricks ( Conforming To Is: 4885 ) In Foundation And Plinth : Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.10 Brick Work With Extruded Burnt Fly Ash Clay Sewer Bricks ( Conforming To Is: 4885 ) In Archesin Foundation And Plinth Including Centering And Shuttering Complete In Cement Mortar 1:3 ( 1 Cement: 3 Sand ) . 6.11 Extra For Brick Work In Superstructure Above Floor Two Levels For Each Additional Floor Or Part Thereof Respective Item . 6.12 Providing Half Brick Masonry With Well Burnt Chimney Bricks In Bull Patent Trench Kiln Manufactured By Ghol Process Crushing Strength Not Less Than 40 Kg / Cm2 And Water Absorption Not More Than 15% In Superstructure Above Plinth Level And Up To Floor Two Level. 6.12.1 Cement Mortar 1:3 ( 1 Cement : 3 Sand ) 6.12.2 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.13 Providing Half Brick Masonry With Well Burnt Chimney Bricks In Bull Pattern Trench Kiln Crushing Strength Not Less Than 25 Kg / Cm2 And Water Absorption Not More Than 20% In Superstructure Above Plinth Level And Up To Floor Two Level. 6.13.1 Cement Mortar 1:3 ( 1 Cement : 3 Sand ) 6.13.2 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.14 Providing Half Brick Masonry With Well Burnt Open Bhatta Bricks Crushing Strength Not Less Than 25 Kg / Cm2 And Water Absorption Not More Than 20% In Superstructure Above Plinth Level And Up To Floor Two Level 6.14.1 Cement Mortar 1:3 ( 1 Cement : 3 Sand ) 6.14.2 Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 6.15 Half Brick Masonry With Fly Ash Lime Gypsum Bricks ( Falg Bricks ) Conforming To Is: 12894, In Super Structure Above Plinth And Upto Floor Two Level. 6.15.1 Having 100 Kg / Cm2 Average Compressive Strength. 6.15.1.1 Cement Mortar 1 : 3 ( 1 Cement : 3 Sand ) 6.15.1.2 Cement Mortar 1 : 4 ( 1 Cement : 4 Sand ) 6.15.2 Having 75 Kg / Cm2 Average Compressive Strength. 6.15.2.1 Cement Mortar 1 : 3 ( 1 Cement : 3 Sand ) 6.15.2.2 Cement Mortar 1 : 4 ( 1 Cement : 4 Sand ) 6.15.3 Having 50 Kg / Cm2 Average Compressive Strength. 6.15.3.1 Cement Mortar 1 : 3 ( 1 Cement : 3 Sand ) 6.15.3.2 Cement Mortar 1 : 4 ( 1 Cement : 4 Sand ) 6.16 Extra For Half Brick Masonry In Superstructure, Above Floor Two Level For Every Floor Or Part Thereof Respective Item. 6.17 Extra For Providing And Placing In Position 2 Nos. 8Mm Dia. M.S. Bars At Every Third Course Of In Half Brick Masonry. 6.18 Honey-Comb Brick Work 10 Cm Thick With Well Burnt Chimney Bricks Manufactured By Ghol Process Crushing Strength Not Less Than 40Kg / Sqcm And Water Absorption Not More Than 15% In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) . 6.19 Extra For Forming Cavity 5Cm To 7.5Cm Wide In Cavity Walls With Necessary Weep And Vent Holes Including Use Of Cores And Cost Of Providing And Fixing Bitumastic Coated M .S. Ties 300Mm Long Of 25X3mm Section At Not Less Than 3 Ties Per Sqm As Per Approved Design 6.20 Brick Work In Plain Arches In Superstructure Including Centering And Shuttering Complete With Chimney Bricks Having Crushing Strength Not Less Than 40Kg / Cm2 And Water Absorption Not More Than 15% In Cement Mortar 1:3 ( 1 Cement : 3 Sand ) . 6.21 Brick Work In Gauged Arches In Superstructure In Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Including Centering And Shuttering Complete, With Chimney Bricks Having Crushing Strength Not Less Than 40Kg / Cm2 And Water Absorption Not More Than 15% 6.22 Providing Half Brick Masonry With Kiln Burnt Clay Bricks Of 40Kg / Cm2 And Water Absorption Not More Than 15% In Cement Mortar 1:3 ( 1 Cement : 3 Sand ) In Superstructure For Closing Cavity 5 To 7.5 Cm Wide In Cavity Wall Complete With 10 Cm Wide Bitumen Felt Type 3 Grade 1. 6.23 Extra For Laying Brick Work In Or Under Water And / Or Liquid Mud Including Cost Of Pumping Or Bailing Out Water And Removing Slush Etc. Complete. Note: - The Quantity Will Be Calculated By Multiplying The Depth Measured From Sub - Soil Water Level Up To The Centre Of Gravity Of Brick Work In Cum Executed Under The Sub - Soil Water. The Depth Of Centre Of Gravity Shall Be Reckoned Correct To 0.1 M. 0.05 M Or More Shall Be Taken As 0.1 M And Less Than 0.05 M Ignored. 6.24 Extra For Laying Brick Work In Or Under Foul Position. 6.25 Providing And Laying Cellular Concrete Blocks Masonry Having Density Ranging From 800Kg / M3 In Super Structure Above Plinth Level Up To Floor Two Level In Cement Mortar 1:4 ( 1 Cement: 4 Sand ) The Nominal Dimensions Of The Concrete Blocks Shall Be As Follows In Additional Block Shall Be Of Half Lengths Of 200, 250 Or 300 Mm To Correspond To The Full Lengths. The Size Of The Blocks Specified Other Than Those Specified May Also Be Used. 6.26 Providing And Laying Autoclaved Aerated Concrete ( Aac ) Blocks Masonry, Using Aac Blocks ( Size Length 300, 400, 500, 600 Mm Height 200, 250, 300 Mm Width 100, 150, 200, 250 Mm ) Conforming To Is 2185 Part 3, Having Compressive Strength Not Less Than 4 Mpa ( Grade Ii ) In Super Structure, Blocks Jointed With Approved Block Laying Polymer Modified Adhesive Mortar As Per Astm International Standard Including Raking Out Joints. Vertical Bands Shall Be Placed Along Jams ( Vertical Member Of Chowkhats ) And Extend Upto Lintel Levels To Arrest Cracking At Corner Openings. Rcc Bands Shall Be Measured With Aac Block Masonry. Rates Include All Materials Including Steel Bars, Wastages, Scaffolding And All Labour Etc. Complete. 6.26.1 Aac Masonry In Polymer Modified Mortar 6.27 Extra For Aac Masonry Work In Superstructure Above Floor Two Level For Each Additional Floor Or Part Thereof 6.28 Providing Hoisting & Fixing Precast Autoclaved Aerated Concrete ( Aac ) Reinforced Roof Slabs, Lintels And Chhajjas As Per Is: 6073 -2006 Grade D Specifications ( Dry Density, Without Steel, 550 Kg / M3 To 650 Kg / M3 And Minimum Compressive Strength 3.5 N / Mm2 ) Reinforcement Steel Provided Inside Aac Slab, Lintel And Chhajja Shall Be Ascertained On The Basis Of Manufacturer’S Certificate And Also By Random Destructive Testing Done By Engineer-In-Charge Or His Representative For Which Cost Of Samples And Testing Charges Shall Be Borne By The Contractor. Deflection & Ultimate Load Test For Aac Reinforced Roof Slab And Lintel Shall Be As Per Annex. B Of Is: 6073 -2006 And Criteria For Conformity And Sampling Shall Be As Per Clause-13 Of Is: 6073 -2006. 6.29 Precast Autoclaved Aerated Concrete ( Aac ) Reinforced Wall Panels:- Providing Hoisting & Fixing Precast Autoclaved Aerated Concrete ( Aac ) Reinforced Wall Panels As Per Is:6072 -1972 Grade D ( Dry Density, Without Steel, 550 Kg / M3 To 650 Kg / M3 And Inside Aac Panels. Quantity Of Reinforcement Steel In Aac Panels Shall Be Ascertained On The Basis Of Certificate Of The Manufacturer And Also By Random Destructive Testing By Engineer-In- Charge Or His Representative For Which Cost Of Samples And Testing Charges Shall Be Borne By The Contractor. Cost Of Reinforcement Inside Aac Panels Shall Be Paid Separately. 6.30 Add Extra For Aac Wall Panels, Roof Slabs, Lintels And Chhajjas Above Floor Two Level For Each Additional Floor As Per Item No 6.29 And 6.30. 6.32 Brick Work With Common Burnt Clay Selected F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10 Mm Wide 12 Mm Deep Complete In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 6.32.1 From Ground Level Upto Plinth Level 6.32.2 Above Plinth Level Upto Floor Ii Level 6.33 Brick Work With Modular Bricks Of Class Designation 7.5 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10Mm Wide 12Mm Deep Complete From Ground Level Up To Plinth Level In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 6.33.1 From Ground Level Upto Plinth Level 6.33.2 Above Plinth Level Upto Floor Ii Level 6.34 Providing And Laying Gypsum Panel Partitions 100 Mm Thick With Water Proof Gypsum Panels Of Size 666X500x100 Mm, Made Of Calcite Phosphor Gypsum Fixed With Tongue And Groove, Jointed With Bonding Plaster As Per Manufacturer’S Specifications In Superstructure Above Plinth Level Up To Floor Two Level. Gypsum Blocks Will Have A Minimum Compressive Strength Of 9.3 Kg / Cm2 6.35 Extra For Gypsum Panel Partitions In Superstructure Above Floor Two Level For Every Four Floors Or Part Thereof. 7.1 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Leveling Up With Cement Concrete 1:6:12 ( 1 Cement :6 Sand : 12 Graded Stone Aggregate 20Mm Nominal Size ) At Plinth Level With : 7.1.1 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 7.2 Random Rubble Masonry With Hard Stone In Superstructure Above Plinth Level And Upto Floor Two Level, Including Leveling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Sand : 12 Graded Stone Aggregate 20Mm Nominal Size ) At Window Sills, Ceiling Level And The Like. 7.2.1 Cement Mortar 1:6 ( 1Cement: 6 Sand ) . 7.3 Extra For Random Rubble Masonry With Hard Stone In Superstructure Above Floor Two Level For Every Floors Or Part Thereof 7.4 Extra For Random Rubble Masonry With Hard Stone In : 7.4.1 Square Or Rectangular Pillars 7.4.2 Circular Pillars. 7.5 Extra For Random Rubble Masonry With Hard Stone Curved On Plan For A Mean Radius Not Exceeding 6 M. 7.6 Coursed Rubble Masonry ( 1St Or 2Nd Sort ) With Hard Stone In Foundation And Plinth. 7.6.1 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 7.6.2 Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 7.7 Coursed Rubble Masonry With Hard Stone ( First Or Second Sort ) In Superstructure Above Plinth Level And Upto Floor Two Level. 7.7.1 Masonry Work ( First Sort ) In Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 7.7.2 Masonry Work ( Second Sort ) , In Cement Mortar 1:6 ( 1 Cement : 6 Sand ) 7.8 Extra For Coursed Rubble Masonry With Hard Stone ( First Or Second Sort ) In Superstructure Above Floor Two Level For Every Floors Or Part Thereof 7.9 Extra For Coursed Rubble Masonry With Hard Stone ( First Or Second Sort ) In : 7.9.1 Square Or Rectangular Pillars 7.9.2 Circular Pillars. 7.9.3 Extra For Coursed Rubble Masonry With Hard Stone ( First Or Second Sort ) Curved On Plan For A Mean Radius Not Exceeding 6 M. 7.10 Stone Work In Plain Ashlar Masonry In Super Structure Upto Floor Two Level In Cement Mortar 1:6 ( 1 Cement : 6 Sand ) Including Pointing With Cement Mortar 1:2 ( 1 White Cement : 2 Marble Dust ) With An Admixture Of Pigment Matching The Sand Stone Shade : 7.10.1 One Face Dressed. 7.10.1.1 Red Sand Stone 7.10.1.2 White Sand Stone 7.10.2 Both Face Dressed. 7.10.2.1 Red Sand Stone. 7.11.2.2 White Sand Stone 7.11 Stone Work Plain Ashlar Masonry In Arches In Super Structure Upto Floor Two Level In Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Including Centering, Shuttering And Pointing With White Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With An Admixture Of Pigment Matching The Sand Stone Shade. 7.11.1 One Face Dressed. 7.11.1.1 Red Sand Stone 7.11.1.2 White Sand Stone 7.11.2 Both Face Dressed. 7.11.2.1 Red Sand Stone. 7.11.2.2 White Sand Stone 7.12 Stone Work Plain Ashlar Masonry In Domes, In Super Structure Upto Floor Two Level In Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Including Centering, Shuttering And Pointing With White Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With An Admixture Of Pigment Matching The Sand Stone Shade. 7.12.1 One Face Dressed 7.12.1.1 Red Sand Stone 7.12.1.2 White Sand Stone 7.12.2 Both Face Dressed. 7.12.2.1 Red Sand Stone. 7.12.2.2 White Sand Stone. 7.13 Stone Work Ashlar Masonry Punched ( Ordinary ) In Superstructure Above Plinth Level And Upto Floor Two Level In Cement Mortar 1:6 ( 1 White Cement: 6 Sand ) Including Pointing With Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With An Admixture Of Pigment Matching The Sand Stone Shade. 7.13.1 Red Sand Stone One Face Punched. 7.13.2 Red Sand Stone Both Face Punched 7.13.3 White Sand Stone One Face Punched. 7.13.4 White Sand Stone Double Face Punched 7.14 Extra For Stone Work, Plain Ashlar Or Ashlar Punched Above Floor Two Level For Every Floor Or Part Thereof. 7.15 Extra For Plain Ashlar Or Ashlar Punched In : 7.15.1 Square Or Rectangular Pillars 7.16 Extra For Stone Work; Plain Ashlar Or Ashlar Punched In Curved On Plan With A Mean Radius Not Exceeding 6 M. 7.17 Extra For Additional Cost Of Centering For Arches Exceeding 6M Span Including All Strutting, Bolting, Wedging Etc. And Removal ( Area Of Soffit To Be Measured ) . 7.18 Stone Work Sunk Or Moulded Or Sunk And Moulded Upto Floor Two Level In Cement Mortar 1:6 ( 1Cement : 6 Sand ) Including Pointing With White Cement Mortar 1:2 ( 1 White : 2 Marble Dust ) With An Admixture Of Pigment Matching The Stone Shade : 7.18.1 Red Sand Stone 7.18.2 White Sand Stone 7.19 Extra For Stone Work Sunk Or Moulded Or Sunk And Moulded Or Carved In : 7.19.1 Triangular Or Square Or Rectangular Pillars 7.19.2 Circular Or Polygonal Pillars 7.20 Extra For Stone Work Sunk Or Moulded In Cornices. 7.21 Stone Work ( Machine Cut Edges ) For Wall Lining Etc. ( Veneer Work ) Up To 10 Meter Height Backing Filled With A Grout Of 12Mm Thick Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Including Pointing In White Cement Mortar 1:2 ( 1 White Cement : 2 Marble Dust ) With An Admixture Of Pigment Matching The Stone Shade : ( To Be Secured To The Backing By Means Of Clamps Which Shall Be Paid For Separately ) : 7.21.1 Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 7.21.1.1 70 Mm Thick. 7.21.1.2 60 Mm Thick. 7.21.1.3 50 Mm Thick 7.21.1.4 40 Mm Thick. 7.21.1.5 30 Mm Thick. 7.21.2 Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 7.21.2.1 70 Mm Thick. 7.21.2.2 60 Mm Thick. 7.21.2.3 50 Mm Thick 7.21.2.4 40 Mm Thick. 7.21.2.5 30 Mm Thick. 7.21.3 White Sand Stone - Exposed Face Fine Dressed With Rough Backing. 7.21.3.1 70 Mm Thick. 7.21.3.2 60 Mm Thick. 7.21.3.3 50 Mm Thick 7.21.3.4 40 Mm Thick. 7.21.3.5 30 Mm Thick. 7.21.4 White Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 7.21.4.1 70 Mm Thick. 7.21.4.2 60 Mm Thick. 7.21.4.3 50 Mm Thick 7.21.4.4 40 Mm Thick. 7.21.4.5 30 Mm Thick. 7.22 Extra For Stone Work ( Veneer Work ) Curved On Plan With A Mean Radius Not Exceeding 6 M. 7.23 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 ( 1 Cement :2 Sand ) Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. 7.24 Providing And Fixing Stone Dowels Of Size 10X5x2.5Cm Cut To Double Wedge Shape As Per Design In Cement Mortar 1:2 ( 1 Cement : 2 Sand ) Including Making The Necessary Chases 7.25 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 ( 1 Cement : 2 Sand ) Including Making The Necessary Chases. 7.26 Providing And Fixing Sloping Chajja Of Stone 40 Mm Thick And Upto 80 Cm Wide Beyond The Wall As Measured Along The Slope In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including Pointing In Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With An Admixture Of Pigment Matching The Stone Shade: 7.26.1 Red Sand Stone: With Common Burnt Clay Bricks Of 25 Kg / Cm2 Compressive Strength. 7.26.2 White Sand Stone: With Common Burnt Clay Bricks Of 25 Kg / Cm2 Compressive Strength. 7.27 Providing And Fixing Horizontal Chajja Of Stone 40 Mm Thick And Upto 80 Cm Projection In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including Pointing In White Cement Mortar 1:2 ( 1 White Cement : 2 Marble Dust ) With An Admixture Of Pigment Matching The Stone Shade: 7.27.1 Red Sand Stone 7.27.2 White Sand Stone 7.28 30Mm Red Sand Stone Sun-Shade ( Chisel-Dressed ) Supported On Red Sand Stone Brackets, Fixed In Walls With Cement Mortar 1:4 ( 1 Cement: 4 Sand ) Including Finishing Complete. 7.29 Providing And Fixing Red Sand Stone Brackets 55X22.5X45cm Sunk And Moulded Including Providing And Fixing With 4 Nos. Gun Metal Cramp 25X6mm 30 Cm Long And Dowel Bars 7.5 Cm Long 6 Mm Dia As Per Design. 7.30 Stone Work, Plain In Copings, Cornices, String Courses And Plinth Courses, Upto 75 Mm Thick In Cement Mortar 1:6 ( 1 Cement : 6 Sand ) Including Pointing With White Cement Mortar 1:2 ( 1 White Cement : 2 Stone Dust ) With An Admixture Of Pigment Matching The Stone Shade. 7.30.1 Red Sand Stone 7.30.2 White Sand Stone 7.31 Providing And Fixing Stone Jali 40Mm Thick Throughout In Cement Mortar 1:3 ( 1Cement :3 Sand ) Including Pointing In White Cement Mortar 1:2 ( 1White Cement: 2Stone Dust ) With An Admixture Of Pigment , Matching The Stone Shade, Jali Slab Without Any Chamfers Etc. 7.31.1 Red Sand Stone 7.31.2 White Sand Stone 7.32 Extra For Laying Stone Work In Or Under Water And / Or Liquid Mud Including Cost Of Pumping Or Bailing Out Water And Removing Slush Etc. Complete. Note: - The Quantity Will Be Calculated By Multiplying The Depth Measured From Sub - Soil Water Level Up To The Centre Of Gravity Of Stone Work In Cum Executed Under The Sub - Soil Water. The Depth Of Centre Of Gravity Shall Be Reckoned Correct To 0.1 M. 0.05 M Or More Shall Be Taken As 0.1 M And Less Than 0.05 M Ignored. 7.33 Extra For Laying Stone Work In Or Under Foul Position. 7.34 Wall Lining Butch Work Upto 10M Height With Red / White Sand Stone 40 Mm Thick Rough Facing On The Exposed Surface With Stone Strips Of Minimum Length 300 Mm And Required Width 75Mm Thick Strips I / C 12Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Sand ) I / C Ruled Pointing In Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With An Admixture Of Pigment To Match The Shade Of Stone Complete As Per Direction Of Engineer-In- Charge. 7.35 Stone Work ( Machine Cut Edges ) For Wall Lining Upto 10 M Height Etc. ( Veneer Work ) Backing Filled With A Grout Of 12Mm Thick Cement Mortar 1:3 ( 1 Cement : 3 Sand ) And Jointed With Cement Mortar 1:2 ( 1 Cement : 2 Marble Dust ) Including Rubbing And Polishing Complete. ( To Be Secured To The Backing By Means Of Cramps Which Shall Be Paid For Separately ) 7.35.1 25Mm Thick Kota Stone Slabs Exposed Face Dressed And Rubbed. 7.35.2 25Mm Thick Dholpur Stone Slabs Exposed Face Dressed And Rubbed. 7.35.3 20 To 25Mm Thick Kota Stone Slabs Exposed Slab Not Dressed And Rubbed. 7.35.4 20 To 25Mm Thick Dholpur Stone / Shivpuri Stone Not Dressed And Rubbed. 7.36 Stone Tile Work With 8Mm Thick Mirror Polished And Machine Cut Edge For Wall Lining Upto 10 M Height With Special Adhesive Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Sand ) , Including Pointing In White Cement With An Admixture Of Pigment To Match The Stone Shade. 7.36.1 Granite Stone Of Any Colour And Shade 7.36.2 Raj Nagar Plain White Marble / Udaipur Green Marble / Zebra Black Marble 7.37 Extra For Stone Work For Wall Lining On Exterior Walls Of Height More Than 10 M From Ground Level For Every Additional Height Of 3 M Or Part Thereof. 7.38 Providing And Fixing Dry Stone Cladding Upto 10 Metre Height With 30Mm Thick Gang Saw Cut Stone With ( Machine Cut Edges ) Of Uniform Colour And / Or With The Help Of Cramps, Pins Etc. And Sealing The Joints With Approved Weather Sealant As Per Architectural Drawing And Direction Of Engineer-In-Charge. ( The Steel Frame Work, Stainless Steel Cramps And Pins. Shall Be Paid For Separately. ) 7.38.1 Red Sand Stone. 7.38.2 White Sand Stone 7.39 Providing And Fixing Structural Steel Frame ( For Dry Stone Cladding With 30 Mm Thick Gang Saw Cut With Machine Cut Edges Sand Stone ) On Walls At All Heights Using M.S. Square / Rectangular Tube In The Required Pattern As Per Architectural Drawing Including Including Drilling Necessary Steel Work Will Be Given A Priming Coat Of Zinc Primer As Approved By Engineer-In-Charge And Painted With Two Or More Coats Of Epoxy Paint ( Shop Drawings Shall Be Submitted By The Contractor To The Engineer-In-Charge For Approval Before Execution ) .The Frame Work Shall Be Fixed In True Horizontal And Vertical Lines / Planes. ( Only Structural Steel Frame Work Shall Be Measured For The Purpose Of Payment, Stainless Steel Clamps Shall Be Paid For Separately And Nothing Extra Shall Be Paid. ) 7.40 Providing And Fixing Adjustable Stainless Steel Clamps Of Approved Quality And Of Required Shape And Size Adjustable With Stainless Steel Nuts Bolts And Washer ( Total Weight Not Less Than 260 Gms ) For Dry Stone Cladding Fixed On Frame 8.1 Providing And Supplying Aluminium Extruded Tubular And Other Aluminium Sections Frame Work As Per The Architectural Drawings And Approved Shop Drawings, The Aluminium Quality As Per Grade 6063 T5 Or T6 As Per Bs 1474, Including Super Durable Powder Coated Of 60-80 Microns Conforming To Aama 2604 Of Required Colour And Shade As Approved By The Engineer-In-Charge. ( The Item Includes Cost Of Material Such As Cleats, Sleeves, Screws Etc. Necessary For Fabrication Of Extruded Aluminium Frame Work. Nothing Extra Shall Be Paid On This Account ) . 8.2 Designing, Fabricating, Testing, Protection, Installing And Fixing In Position Semi ( Grid ) Unitized System Of Aluminium Structural Glazing ( With Open Joints ) For Linear As Well As Curvilinear Portions Of The Building For All Heights And All Levels.. The Item Includes The Cost Of Getting All The Structural And Functional Design Including Shop Drawings Checked By A Structural Designer, Dully Approved By Engineer-In-Charge. The Item Also Includes The Cost Of All Mock Ups At Site, Cost Of All Samples Of The Individual Components For Testing In An Approved Laboratory, Field Tests On The Assembled Working Structural Glazing As Specified, Cleaning And Protection Till The Handing Over Of The Building For Occupation. In The End, The Contractor Shall Provide A Water Tight Structural Glazing Having All The Performance Characteristics Etc. All Complete As Required, As Per The Architectural Drawings, As Per Item Description, As Specified, As Per The Approved Shop Drawings And As Directed By The Engineerin- Charge. 8.3 Providing, Assembling And Supplying Vision Glass Panels ( Igus ) Comprising Of Hermetically-Sealed 6-12- 6 Mm Insulated Glass ( Double Glazed ) Vision Panel Units Of Size And Shape As Required And Specified, Comprising Of An Outer Heat Strengthened Float Glass 6Mm Thick, Of Approved Colour As Per The Architectural Drawings, As Per The Approved Shop Drawings, As Specified And As Directed By The Engineer-In-Charge. The Igus Shall Be Assembled In The Factory / Workshop Of The Glass Processor. ( Payment For Fixing Of Igu Panels In The Curtain Glazing Is Included In Cost Of Item No.8.2 ) For Payment, Only The Actual Area Of Glass On Face # 1 Of The Glass Panels ( Excluding The Areas Of The Grooves And Weather Silicone Sealant ) Provided And Fixed In Position, Shall Be Measured In Sqm. 8.4 Extra For Openable Side / Top Hung Vision Glass Panels ( Igus ) Including Providing And Supplying At Site All Accessories And Hardwares For The Openable Panels As Specified And Of The Approved Make Such As Heavy Duty Stainless Steel Friction Hinges, Min 4 -Point Cremone Locking Sets With Stainless Steel Plates, Handles, Buffers Etc. Including Necessary Stainless Steel Screws / Fasteners, Nuts, Bolts, Washers Etc. All Complete As Per The Architectural Drawings, As Per The Approved Shop Drawings, As Specified And As Directed By The Engineerin- Charge. 8.5 Providing, Fabricating And Supplying Shadow Box Of Required Size And Shape, For Fixing In The Spandrel Portion Of The Structural Glazing, In Linear As Well As Curvilinear Portions Of The Building By Providing Semi - Rigid, Inorganic, Non- Combustible Fibre Glass Wool Insulation 50 Mm Thick Having Density 48 Kg / M3, Conforming To Is: 8183 And Bs: 3958 Part 5.The Insulation Layer Shall Have Facing ( Factory Bonded On Surface # 1 Of The Fibre Glass Insulation Layer ) , Of Black Non- Woven Fibre Glass Tissue Of Nominal Thickness 0.5 Mm And Nominal Mass Not Less Than 60 Gm / Sqm, Made Of Randomly Oriented Glass Fibres Distributed In A Binder By A Wet-Lay Process Including Fixing 1.5 Mm Thick Solid Aluminum Sheet Backing Using, 6 Mm Thick Cement Board Including Ss Rivets, Nuts, Bolts, Washers Etc Complete. 8.6 Providing And Supplying Spandrel Glass Panels Comprising Of 6 Mm Thick Heat Strengthened Monolithic Float Glass Of Approved Colour And Shade With Reflective Soft Coating On Surface # 2 Of Approved Colour And Shade So As To Match The Colour And Shade Of The Igus In The Vision Panels Etc., Included In Cost Of Relevent Item ) . ( I ) Coloured Tinted Float Glass 6Mm Thick Substrate With Reflective Soft Coating On Face # 2, Having Properties As Visible Light Transmittance ( Vlt ) Of 25 To 35 %, Light Reflection Internal 10 To 15%, Light Reflection External 10 To 20 %, Shading Coefficient ( 0.25- 0.28 ) And U Value Of 3.0 To 3.3 W / M2 Degree K Etc. The Properties Of Performance Glass Shall Be Decided By Technical Sanctioning Authority As Per The Site Requirement. 8.7 Designing, Fabricating, Testing, Installing And Fixing In Position Curtain Wall With Aluminium Composite Panel ( Acp ) Cladding, With Open Grooves For Linear As Well As Curvilinear Portions Of The Building, For All Heights And All Levels Etc. Including: With Aluminium Composite Panel Cladding, Having All The Performance Characteristics All Complete, As Per The Architectural Drawings, As Per Item Description, As Specified, As Per The Approved Shop Drawings And As Directed By The Engineer- In-Charge. However, For The Purpose Of Payment, Only The Actual Area On The External Face Of The Curtain Wall With Aluminum Composite Panel Cladding ( Including Width Of Groove ) Shall Be Measured In Sqm. Upto Two Decimal Places. 8.7.1 4 Mm Thick Alumminium Composite Pannel Material Consisting Of 3 Mm Thick Fr Grade Mineral Core Sandwiched Between Two Alumminium Sheets ( Each 0.5Mm Thick ) 8.7.2 4 Mm Thick Alumminium Composite Pannel Material Consisting Of 3.5 Mm Thick Fr Grade Mineral Core Sandwiched Between Two Alumminium Sheets ( Each 0.25Mm Thick ) 8.7.3 3 Mm Thick Alumminium Composite Pannel Material Consisting Of 2.5 Mm Thick Fr Grade Mineral Core Sandwiched Between Two Alumminium Sheets ( Each 0.25Mm Thick ) 8.8 Design, Supply And Installation Of Suspended Spider Glazing System Designed To Withstand The Wind Pressure As Pr Is 875 ( Part- Iii ) . The Suspended System Held With Spider Fittings Of Ss-316 Grade Steel Of Approved Manufacturer With Glass Panel Having 12 Mm Thick Clear Toughened Glass Held Together With Ss- 316 Grade Stainless Steel Spider And Other Incidental Charges Including Wastage, Enabling Temporary Services All Fitting Fixers Nut Bolts, Washer, Buffer Plates, Fastener, Anchors, Ss Channel Laminated Glass Etc. All Complete.For The Purpose Of Payment Actual Elevation Area Of Glazing Including Thickness Of Joints And The Portion Of Glass Panel Inside The Ss Channel Shall Be Measured. , 8.9 Providing And Fixing Aluminium Magnesium Alloy ( Facade ) Wall Cladding System Consisting Of Panels 200Mm Wide X 17Mm Deep X 0.5Mm Thick Of Maximum Length Of 6.0 Mtr. Coil Coated On A Continuous Paint Line Double Baked And Roll Formed From Centre To Centre At A Distance Of Maximum 1.20 Mtr. The Stringer Shall Be Fixed To A Suitable Rigid Structure. All Panels Shall Be Achromatised For Maximum Bond Between Metal And Paint, Enamelled Twice Under High Temperature One Side With Full Primer And The Other Side ( Inner Side ) With A Primer Coat On A Continuous Paint Line, And Fixed As Per The Direction Of The Engineer-In-Charge. 8.10 Providing And Fixing Aluminium Magnesium Alloy Plain Panel Sun Louvres Of Approved Colour Consisting Of Panel 84 Mm Wide X 16Mm Deep X 0.6Mm Thick With Round Edges Panel Length Upto 6 Mtrs Coil Coated On A Continuos Paint Line Double Baked Between Metal And Paint, Enamelled Twice Under High Temperature One Side With Full Primer And Finish, The Other Side ( Inner Side ) With A Primer Coat And Skin Coat On A Continuos Paint Line. Note: - 1. The Cost Of Providing Extruded Aluminium Frames, Shadow Boxes, Extruded Aluminium Section Capping For Fixing In The Grooves Of The Curtain Glazing Shall Be Paid For Separately Under Relevant Items Under This Subhead. However, For The Purpose Of Payment, Only The Actual Area Of Structural Glazing ( Including Width Of Grooves ) On The External Face Shall Be Measured In Sqm. Upto Two Decimal Places. 9.1 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) . 9.1.1 Second Class Teak Wood 9.1.2 Sal Wood 9.1.3 Kiln Head Wood Seasoned And Chemically Treated Hard Wood ( Haldu, Kail, Bija Wood. ) 9.1.4 Factory Made Kiln Seasoned, Chemically Treated, Finger Jointed At Spacing Not Closer Than 50 Cm, 2Nd Class Hard Wood. 9.1.4.1 Frame Of Size 100Mmx60mm Single Or Double Rebate 9.1.4.2 Frame Of Size 120Mmx60mm Double Rebate. 9.2 Providing Laminated Veneer Lumber Conforming To Is:14616 And Tad -15: 2001 ( Part-B ) In Factory Made Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixing In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) . 9.3 Providing Wood Work In Frames Of False Ceiling, Partitions Etc. Sawn And Fixed In Position ( With Necessary Stainless Steel Screw ) 9.3.1 Sal Wood 9.3.2 Kiln Seasoned And Chemically Treated Hardwood Haldu, Kail, Bija Wood. 9.3.3 Factory Made Kiln Seasoned, Chemically Treated, Finger Jointed At Spacing Not Closer Than 50 Cm, 2Nd Class Hard Wood. 9.4 Extra For Additional Labour Wood Work In Circular Shape, Such As In Frames Of Fan Light : 9.4.1 Second Class Teak Wood 9.4.2 Sal Wood 9.4.3 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.4.4 Factory Made Kiln Seasoned, Chemically Treated, Finger Jointed At Spacing Not Closer Than 50 Cm, 2Nd Class Hard Wood. 9.5 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws Excluding, Panelling / Glazing Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. 9.5.1 Second Class Teak Wood 9.5.1.1 35 Mm Thick Shutters 9.5.1.2 30 Mm Thick Shutters 9.5.2 Kiln Seasoned And Chemically Treated Hardwood Haldu, Kail, Bija Wood. 9.5.2.1 35 Mm Thick Shutters 9.5.2.2 30 Mm Thick Shutters 9.5.3 Kiln Seasoned Selected Planks Of Sheesham Wood. 9.5.3.1 35 Mm Thick Shutters 9.5.3.2 30 Mm Thick Shutters 9.5.4 Factory Made Kiln Seasoned Chemically Treated And Finger Jointed At Spacing Not Closer Than 50Cm, 2Nd Class Hard Wood Shutters 9.5.4.1 35 Mm Thick 9.5.4.2 30 Mm Thick 9.6 Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick: 9.6.1 Second Class Teak Wood 9.6.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood 9.6.3 15Mm Thick Factory Made Kiln Seasoned, Chemically Treated And Finger Jointed At Spacing Not Closer Than 50Cm, 2Nd Class Hard Wood. 9.6.4 Ply Wood 5 Ply, 9 Mm Thick : 9.6.4.1 Decorative Plywood Both Side Decorative Veneer ( Type - I ) Conforming To Is 1328 Bwr Type. 9.6.4.2 Decorative Plywood One Side Decorative Veneer And Commercial Veneer On Other Face ( Type 1 ) Conforming To Is 1328 Bwr Type 9.6.5 Ply Wood 7 Ply, 9 Mm Thick : 9.6.5.1 Decorative Plywood Both Side Decorative Veneer ( Type- I ) Conforming To Is 1328 Bwr Type. 9.6.5.2 Decorative Plywood One Side Decorative Veneer And Commercial Veneer On Other Face ( Type-1 ) Conforming To Is 1328 Bwr Type 9.6.6 Particle Board 12 Mm Thick 9.6.6.1 Plain Particle Board Flat Pressed, 3 Layer Or Graded Wood Particle Board Medium Density Grade I, Is: 3087 Marked. 9.6.6.2 Veneered Flat Pressed Three Layer Or Graded Wood Particle Board With Commercial Veneering On Both Sides Conforming To Is: 3097, Grade I. 9.6.6.3 Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side, Grade I, Type Ii Is: 12823 Marked. 9.6.6.4 Pre-Laminated Particle Board With Decorative Lamination On Both Sides, Grade I, Type Ii, Is: 12823 Marked. 9.6.6.5 Coir Veneer Board ( Conforming To Is 14842 ) 12 Mm Thick 9.6.7 Float Glass Panes 9.6.7.1 4 Mm Thick Glass Pane ( Weight Not Less Than 10 Kg / Sqm ) 9.6.7.2 5 Mm Thick Glass Pane ( Weight Not Less Than 12.5 Kg / Sqm ) 9.6.8 Fly Proof Stainless Steel Grade 304 Wire Gauge With 0.5 Mm Dia. Wire And 1.4 Mm Wide Aperture With Matching Wood Beading 9.6.8.1 4Mm To 5Mm Thick Integral Pvc Form Sheet With Celluka Finish Surface On Both Side With Density Not Less Than 600 Kg / Cum 9.6.8.2 4Mm To 5Mm Thick Laminated Pvc Form Sheet With Density Not Less Than 600 Kg / Cum, Laminated On Both Sides By 0.12 Mm Thick Laminated Sheet With Density Not Less Than 1400 Kg / Cum 9.7 Providing And Fixing 35 Mm Thick Factory Made Laminated Veneer Lumber Door Shutter Conforming To Is : 14616 And Tads 15:2001 ( Part B ) Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, All Complete As Per Directions Of Engineer-In- Charge And Panelling With Panels Of: 9.7.1 12Mm Thick Plain Grade - 1, Medium Density Flat Pressed Three Layer Particle Board Fpt - I Or Graded Wood Particle Board Fpt - I Is : 3087 Marked Bonded With Bwp Type Synthetic Resin Adhesive As Per Is : 848 : 9.7.2 12 Mm Thick Pre-Laminated Particle Board ( Decorative Lamination On Both Sides ) Grade - 1, Medium Density Flat Pressed, Three Layer Particle Board Fpt - I Or Graded Wood Particle Board Fpt - I, Conforming To Is : 3087 Bonded With Bwp Type Synthetic Resin Adhesive As Per Is : 848 And Pre- Lamination Conforming To Is : 12823 Grade 1, Type - Ii Marked: 9.7.3 12 Mm Thick One Side Pre-Laminated Particle Board ( Decorative Lamination On One Side And Other Sides Balancing Lamination ) Grade - 1 Medium Density Flat Pressed, Three Layer Particle Board Fpt - I Or Graded Wood Particle Board Fpt-1 Conforming To Is : 3087 Bonded With Bwp Type Synthetic Resin Adhesive As Per Is : 848 And Prelamination Conforming To Is : 12823 Grade -1, Type Ii Marked: 9.8 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. 9.8.1 Second Class Teak Wood 9.8.1.1 35 Mm Thick 9.8.1.2 30 Mm Thick 9.8.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood 9.8.2.1 35 Mm Thick 9.8.2.2 30 Mm Thick 9.8.3 Kiln Seasoned Selected Planks Of Sheesham Wood. 9.8.3.1 35 Mm Thick 9.8.3.2 30 Mm Thick 9.8.4 Factory Made Kiln Seasoned Chemically Treated And Finger Jointed At Spacing Not Closer Than 50Cm, 2Nd Class Hard Wood 9. 8.4.1 30 Mm Thick Shutters 9. 8.4.2 35 Mm Thick Shutters 9.9 Providing And Fixing Factory Made Laminated Veneer Lumber Glazed Shutter Conforming To Is: 14616 And Tads 15:2001 ( Part B ) , Using 4Mm Thick Float Glass Panes For Doors, Windows And Clerestory Windows Including Isi Marked Fixing With M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Directions Of Engineer-In- Charge. 30 Mm Thick Shutters. 9.10 Extra For Providing Heavy Sheet Float Glass Panes Instead Of Ordinary Float Glass In Glazed Doors, Windows And Clerestory Window Shutters. ( Area Of Opening For Glass Panes Excluding Portion Inside Rebate Shall Be Measured ) 9.10.1 5 Mm Thick Instead Of 4 Mm Thick. 9.10.2 10 To 12 Mm Float Glass 9.10.3 5.5 Mm Safety Glass 9.10.4 10-12Mm Safety Glass 9.11 Extra For Providing Frosted Glass Panes 4 Mm Thick Instead Of Ordinary Float Glass Panes 4 Mm Thick In Doors, Windows And Clerestory Window Shutters. ( Area Of Opening For Glass Panes Excluding Portion Inside Rebate Shall Be Measured ) . 9.12 Deduct For Providing Pin Headed Glass Panes Instead Of Ordinary Float Glass Panes 4 Mm Thick In Doors, Windows And Clerestory Windows, Shutters ( Area Of Opening For Glass Panes Excluding Portion Inside Rebate Shall Be Measured ) . 9.13 Extra For S.S, Hinges Providing Isi Marked Stainless Steel Butt Hinges Instead Of M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. ( Shutter Area To Be Measured ) . 9.14 Deduct For Not Providing Hinges In Doors, Windows Or Clerestory Window Shutters With : 9.14.1 Stainless Steel Butt Hinges With Stainless Steel Screws For 2Nd Class Teak Wood And Other Class Of Wood Shutters. 9.14.2 Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size For 2Nd Class Teak Wood And Other Class Of Wood Shutters. 9.15 Providing And Fixing 25 Mm Thick Second Class Teak Wood Shutters Using 4Mm Float Glass For Cup Board Etc. : 9.15.1 Panelled Or Panelled And Glazed Shutters : 9.15.1.1 Using Isi Marked Anodised Aluminium Butt Hinges With Necessary Screws. 9.15.1.2 Using Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 9.15.2 Glazed Shutters : 9.15.2.1 Second Class Teak Wood Including Isi Marked Anodised Aluminium Butt Hinges With Necessary Screws. 9.15.2. 2Nd Class Teak Wood Including Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 9.16 Providing And Fixing Flat Pressed 3 Layer Particle Board Medium Density Exterior Grade ( Grade I ) Or Graded Wood Particle Board Is : 3087 Marked To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately ) : 9.16.1 12 Mm Thick 9.16.2 18 Mm Thick 9.17 Providing And Fixing Pre-Laminated Flat Pressed 3 Layer ( Medium Density ) Particle Board Or Graded Wood Particle Board Is : 3087 Marked With One Side Decorative And Other Side Balancing Lamination Grade I, Type Ii Exterior Grade Is : 12823 Marked In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer ( Fittings To Be Paid Separately ) . 9.17.1 18 Mm Thick 9.17.2 25 Mm Thick 9.18 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is: 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutter. 9.18.1 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. 9.18.2 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. 9.18.3 25 Mm Thick ( For Cupboard ) Including Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges Is: 3818 Marked With Necessary Screws. 9.19 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is: 2202 ( Part I ) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. 9.19.1 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. 9.19.2 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. 9.19.3 25Mm Thick ( For Cupboard ) Including Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 9.20 Extra For Providing And Fixing Flush Doors With Decorative Veneering Instead Of Non Decorative Isi Marked Flush Door Shutters Conforming To Is: 2202 ( Part I ) On One Side Only. 9.21 Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters ( Over All Area Of Door Shutter To Be Measured ) . 9.22 Extra For Providing Vision Panel Not Exceeding 0.1 Sqm In All Type Of Flush Doors ( Cost Of Glass Excluded ) ( Overall Area Of Door Shutter To Be Measured ) : 9.22.1 Rectangular Or Square. 9.22.2 Circular. 9.23 Extra If Louvers ( Not Exceeding 0.2 Sqm ) Are Provided In Flush Door Shutters ( Overall Area Of Door Shutters To Be Measured ) . 9.24 Extra For Cutting Rebate In Flush Door Shutters ( Total Area Of The Shutter To Be Measured ) . 9.25 Providing And Fixing Wire Gauze Shutters Using Galvanised M.S. Wire Gauze Of Average Width Of Aperture 1.4Mm In Both Direction With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Hinges And Necessary Screws: 9.25.1 35 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.25.1.1 Second Class Teak Wood. 9.25.1.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.25.1.3 Kiln Seasoned Selected Class Of Sheesham Wood. 9.25.2 35 Mm Thick Shutters With Isi Marked Stainless Steel Butt Hinges Of Required Size. 9.25.2.1 Second Class Teak Wood. 9.25.2.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.25.2.3 Kiln Seasoned Selected Class Of Sheesham Wood. 9.25.3 30 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.25.3.1 Second Class Teak Wood. 9.25.3.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.25.3.3 Kiln Seasoned Selected Class Of Sheesham Wood. 9.25.4 30 Mm Thick Shutters With Isi Marked Stainless Steel Butt Hinges Of Required Size. 9.25.4.1 Second Class Teak Wood. 9.25.4.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.25.4.3 Kiln Seasoned Selected Class Of Sheesham Wood. 9.26 Providing And Fixing Wire Gauge Laminated Veneer Lumber Shutters Conforming To Is : 14616, And As Per Tads 15 :2001 ( Part B ) Using Galvanised Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm As Per Is :1568 For Doors, Windows And Clerestory Windows Including Isi Marked M.S. Pressed Fixing With Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Directions Of Engineer-In-Charge: 9.26.1 35 Mm Thick Shutters 9.26.2 30 Mm Thick Shutters 9.27 Providing 50X50x50mm 2Nd Class Teak Wood Plugs Including Cutting Brick Work And Fixing In Cement Mortar 1:3 ( 1 Cement : 3 Sand ) And Making Good The Walls Etc. 9.28 Providing And Fixing Expandable Fasteners Of Specified Size With Necessary Plastic Sleeves And Galvanised M.S. Screws Including Drilling Holes In Masonry Work / Cc / R.C.C. And Making Good Etc. Complete. 9.28.1 25 Mm Long 9.28.2 32 Mm Long 9.28.3 40 Mm Long 9.28.4 50 Mm Long 9.28.5 60 Mm Long 9.29 Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 9.29.1 40 Mm Thick. 9.29.2 25 Mm Thick. 9.29.3 20 Mm Thick 9.29.4 12 Mm Thick 9.30 Providing And Fixing In Wall Lining Flat Pressed Three Layer ( Medium Density ) Particle Board Or Graded Wood Pre- Laminated One Side Decorative Lamination On Other Side Balancing Lamination Grade I, Type Ii, Is : 12823 Marked Including Priming Coat On Unexposed Surface, With Necessary Fixing Arrangement And Screws Etc. Complete : 9.30.1 12 Mm Thick 9.30.2 18 Mm Thick 9.30.3 25 Mm Thick 9.31 Providing And Fixing Specified Wood Frame Work Consisting Of Battens 50X25mm Fixed With Rawl Plug And Drilling Necessary Holes For Rawl Plug Etc. Including Priming Coat Complete. Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.32 Providing And Fixing Plywood 4 Mm Thick One Side Decorative Veneer Conforming To Is: 1328 ( Type-1 ) For Plain Lining / Cladding With Necessary Screws, Priming Coat On Unexposed Surface With: Decorative Veneer Facings Of Approved Manufacture. 9.33 Providing And Fixing 4Mm Thick Coir Veneer Board, Isi Marked Is: 14842, Plain Lining With Necessary Screws, Priming Coat On Unexposed Surface Etc., Complete. 9.34 Providing And Fixing Skirting Of Pre- Laminated With ( One Side Decorative And Other Side Balancing Lamination ) Flat Pressed, 3 Layer Or Graded Particle Board ( Medium Density ) Grade I, Type Ii, Is :12823 Marked, With Necessary Fixing Arrangements And Screws Including Drilling Necessary Holes For Rawl Plugs Etc. And Priming Coat On Unexposed Surface Complete : 9.34.1 18 Mm Thick 9.34.2 25 Mm Thick 9.35 Providing And Fixing Wooden Moulded Beading To Door And Window Frames With Iron Screws, Plugs And Priming Coat On Unexposed Surface Etc. Complete : 9.35.1 2Nd Class Teak Wood 9.35.1.1 50X12 Mm 9.35.1.2 50 X 20 Mm 9.35.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.35.2.1 50X12 Mm 9.35.2.2 50X20 Mm 9.36 Providing And Fixing Plain Jaffri Of 35X10 Mm Laths Placed 35 Mm Apart ( Frames To Be Paid Separately ) Including Fixing 50X12 Mm Beading Complete With : Second Class Teak Wood. 9.37 Providing And Fixing 18 Mm Thick, 150 Mm Wide Pelmet Of Flat Pressed 3 Layer Or Graded Wood Particle Board Medium Density Grade I, Is : 3087 Marked, , Including Fixing With 25X3 Mm M.S. Flat 10 Cm Long Fixed To Pelmet With Haldu, Kail, Bija Wood Cleats Of Size 100 Mm X 40 Mm X 40 Mm On Both Inner Side Of Pelmet And Rawl Plugs 75 Mm Long Etc. All Complete. 9.38 Providing And Fixing 18 Mm Thick, 150 Mm Wide Pelmet Of Coir Veneer Board Isi Marked Is: 14842, Including Top Cover Of 6 Mm Coir Veneer Board, Nickle Plated Brackets, Including Fixing With 25X3 Mm M.S. Flat 10 Cm Long Fixed To Pelmet With Haldu, Kail, Bija Wood Cleats Of Size 100 Mm X 40 Mm X 40 Mm On Both Inner Side Of Pelmet And Rawl Plugs 75 Mm Long Etc. All Complete. 9.39 Extra For Using Veneered Particle Board Conforming To Is 3097 Grade I, In Item Of Pelmet 18Mm Thick 150Mm Wide. 9.39.1 Non Decorative Veneer On Both Sides. 9.39.2 Particle Board With Decorative Veneering On Both Sides. 9.40 Providing And Fixing Teak Wood Lipping Of Size 25X3 Mm In Pelmet. 9.41 Providing And Fixing Of 1.25 Mm Thick Chromium Plated Brass Plate, With Two Chromium Plated Curtain Rods Brass Brackets Fixed With C.P. Brass Screws And Wooden Plugs, Etc., Wherever Necessary Complete: 9.41.1 12 Mm Dia. 9.41.2 20 Mm Dia. 9.41.3 25 Mm Dia. 9.42 Providing And Fixing Nickel Plated Curtain Rods M.S. Pipe With Nickel Plated Brackets : 9.42.1 20 Mm Dia ( Heavy Type ) 9.42.2 25 Mm Dia ( Heavy Type ) 9.43 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. 9.43.1 Fixed To Steel Windows By Welding. 9.43.2 Fixed To Openings / Wooden Frames With Rawl Plugs Screws Etc. 9.44 Providing And Fixing Expanded Metal 20X60 Mm Strands 3.25 Mm Wide And 1.6 Mm Thick For Windows Etc. Including 62 X19 Mm Beading Of Ii Nd Class Teak Wood And Priming Coat With Approved Steel Primer All Complete. 9.45 Providing And Fixing Hard Drawn Steel Wire Fabric 75X25 Mm Mesh Of Weight Not Less Than 7.75 Kg Per Sqm To Window Frames Etc. Including 62X19 Mm Beading Of Second Class Teak Wood And Priming Coat With Approved Steel Primer All Complete. 9.46 Providing And Fixing Fly Proof Galvanized M.S. Wire Gauge To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm All Complete. 9.46.1 With 2Nd Class Teak Wood Beading 62X19 Mm. 9.46.2 With 12 Mm Mild Steel U Beading. 9.47 Deduct For Fixing 75X25 Mm Hard Drawn Steel Wire Fabric Of Weight Not Less Than 7.75 Kg. Per Sqm In Panelled And Glazed Door And Window Shutter Instead Of Glass Sheet 4 Mm Thick. 9.48 Providing 40X5 Mm Flat ( Iron Hold Fast 40 Cm Long ) ( 0.628 Kg ) Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embeddings In Cement Concrete Block 30X10x15cm 1:3:6 Mix ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20Mm Nominal Size ) 9.49 Providing Wooden Beams Including Hoisting, Fixing In Position And Applying Wood Preservative For The Unexposed Surfaces, Etc. Complete With : 9.49.1 Sal Wood. 9.49.2 Haldu, Kail, Bija Wood. 9.50 Providing And Fixing Isi Marked M.S. Pressed Butt Hinges Bright Finished With Necessary Screws Etc. Complete : 9.50.1 125X65x2.12 Mm 9.50.2 100X58x1.90 Mm 9.50.3 75X47x1.70 Mm 9.50.4 50X37x1.50 Mm 9.51 Providing And Fixing Is : 1341 Marked M.S. Heavy Weight Butt Hinges With Necessary Screws Etc. Complete : 9.51.1 125X90x4.00 Mm 9.51.2 100X75x3.50 Mm 9.51.3 75X60x3.10 Mm 9.51.4 50X40x2.50 Mm 9.52 Providing And Fixing Isi Marked Oxidised M.S. Pressed Butt Hinges With Necessary Screws Etc. Complete. 9.52.1 125X65x2.12 Mm 9.52.2 100X58x1.90 Mm 9.52.3 75X47x1.70 Mm 9.52.4 50X37x1.50 Mm 9.53 Providing And Fixing Isi Marked Oxidised M.S. Pressed Parliamentary Hinges With Necessary Screws Etc. Complete : 9.53.1 150X125x27x2.80 Mm 9.53.2 125X125x27x2.80 Mm 9.53.3 100X125x27x2.80 Mm 9.53.4 75X100x20x2.24 Mm 9.54 Providing And Fixing Isi Marked Oxidised M.S. Single Acting Spring Hinges With Necessary Screws Etc. Complete : 9.54.1 150 Mm 9.54.2 125 Mm 9.54.3 100 Mm 9.55 Providing And Fixing Oxidised M.S. Double Acting Spring Hinges With Necessary Screws Etc. Complete. 9.55.1 150 Mm 9.55.2 125 Mm 9.55.3 100 Mm 9.56 Providing M.S. Piano Hinges Isi Marked Is: 3818 Finished With Nickel Plating And Fixing With Necessary Screws Etc., Complete. 9.56.1 Overall Width 35 Mm. 9.56.2 Overall Width 50 Mm. 9.56.3 Overall Width 65 Mm. 9.57 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete: 9.57.1 300X16 Mm 9.57.2 250X16 Mm 9.58 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, ( Barrel Type ) With Necessary Screws Etc. Complete : 9.58.1 250X10 Mm 9.58.2 200X10 Mm 9.58.3 150X10 Mm 9.58.4 100X10 Mm 9.59 Providing And Fixing Isi Marked 85X42mm Oxidised M.S. Pull Bolt Lock Conforming To Is: 7534 With Necessary Screws Bolts, Nut And Washers Etc. Complete 9.60 Providing And Fixing Isi Marked Oxidised M.S. Door Latches Conforming To Is:5930 With Screws Etc. Complete : 9.60.1 300X20x6 Mm 9.60.2 250X20x6 Mm 9.61 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : 9.61.1 125 Mm 9.61.2 100 Mm 9.61.3 75 Mm 9.62 Providing And Fixing Oxidised M.S. Hasp And Staple ( Safety Type ) Conforming To Is : 363 With Necessary Screws Etc. Complete : 9.62.1 150 Mm 9.62.2 115 Mm 9.62.3 90 Mm 9.63 Providing And Fixing Oxidised M.S. Casement Stays ( Straight Peg Type ) With Necessary Screws Etc. Complete. 9.63.1 300 Mm Weighing Not Less Than 200 Gms. 9.63.2 250 Mm Weighing Not Less Than 150 Gms. 9.63.3 200 Mm Weighing Not Less Than 120 Gms. 9.64 Providing And Fixing Oxidised M.S. Safety Chain With Necessary Fixtures For Doors. ( Weighing Not Less Than 450 Gms. ) 9.65 Providing And Fixing Isi Marked Stainless Steel Sliding Door Bolts With Nuts And Screws Etc. Complete: 9.65.1 300X16 Mm 9.65.2 250X16 Mm 9.66 Providing And Fixing Isi Marked Stainless Steel Tower Bolt Black Finish, ( Barrel Type ) With Necessary Screws Etc. Complete : 9.66.1 250X10 Mm 9.66.2 200X10 Mm 9.66.3 150X10 Mm 9.66.4 100X10 Mm 9.67 Providing And Fixing Isi Marked 85X42mm Stainless Steel Pull Bolt Lock With Necessary Screws Bolts, Nut And Washers Etc. Complete. 9.68 Providing And Fixing Isi Marked Stainless Steel Door Latches With Screws Etc. Complete : 9.68.1 300X20x6 Mm 9.68.2 250X20x6 Mm 9.69 Providing And Fixing Isi Marked Stainless Steel Handles With Necessary Screws Etc. Complete : 9.69.1 125 Mm 9.69.2 100 Mm 9.69.3 75 Mm 9.70 Providing And Fixing Stainless Steel Hasp And Staple ( Safety Type ) Conforming To Is Specification With Necessary Screws Etc. Complete : 9.70.1 150 Mm 9.70.2 115 Mm 9.70.3 90 Mm 9.71 Providing And Fixing Stainless Steel Casement Stays ( Straight Peg Type ) Conforming To Is Specification With Necessary Screws Etc. Complete. 9.71.1 300 Mm Weighing Not Less Than 200 Gms. 9.71.2 250 Mm Weighing Not Less Than 150 Gms. 9.71.3 200 Mm Weighing Not Less Than 120 Gms. 9.72 Providing And Fixing Stainless Steel Safety Chain With Necessary Fixtures For Doors. Conforming To Is Specification ( Weighing Not Less Than 450 Gms. ) 9.73 Providing And Fixing Is : 12817 Marked Stainless Steel Butt Hinges With Stainless Steel Screws Etc. Complete : 9.73.1 125X64x1.90 Mm 9.73.2 100X58x1.90 Mm 9.73.3 75X47x1.80 Mm 9.73.4 50X37x1.50 Mm 9.74 Providing And Fixing Is : 12817 Marked Stainless Steel Butt Hinges ( Heavy Weight ) With Stainless Steel Screws Etc. Complete : 9.74.1 125X64x2.50 Mm 9.74.2 100X60x2.50 Mm 9.74.3 75X50x2.50 Mm 9.75 Providing And Fixing 50 Mm Stainless Steel Cup Board Or Wardrobe Knob With Necessary Screws ( Best Make Of Approved Quality ) 9.76 Providing And Fixing Stainless Steel Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete. 9.77 Providing And Fixing Bright Finished Brass Butt Hinges With Necessary Screws Etc. Complete : 9.77.1 125X85x5.5 Mm ( Heavy Type ) 9.77.2 125X70x4 Mm ( Ordinary Type ) 9.77.3 100X85x5.5 Mm ( Heavy Type ) 9.77.4 100X70x4 Mm ( Ordinary Type ) 9.77.5 75X65x4 Mm ( Heavy Type ) 9.77.6 75X40x2.5 Mm ( Ordinary Type ) 9.77.7 50X40x2.5 Mm ( Ordinary Type ) 9.78 Providing And Fixing Bright Finished Brass Parliamentary Hinges With Necessary Screws Etc. Complete : 9.78.1 150X125x27x5 Mm 9.78.2 125X125x27x5 Mm 9.78.3 100X125x27x5 Mm 9.78.4 75X100x20x3.2 Mm 9.79 Providing And Fixing Bright Finished Brass Tower Bolts ( Barrel Type ) With Necessary Screws Etc. Complete : 9.79.1 400X10 Mm 9.79.2 250X10 Mm 9.79.3 200X10 Mm 9.79.4 150X10 Mm 9.79.5 100X10 Mm 9.80 Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc. Complete. 9.80.1 300X16x5 Mm 9.80.2 250X16x5 Mm 9.81 Providing And Fixing Bright Finished Brass Handles With Necessary Screws Etc. Complete. 9.81.1 125 Mm 9.81.2 100 Mm 9.81.3 75 Mm 9.82 Providing And Fixing Bright Finished Brass Sliding Door Bolts With Nuts And Screws Etc Complete. 9.82.1 300X16mm 9.82.2 250X16mm 9.83 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles With Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 9.84 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock Isi Marked With Six Levers And A Pair Of Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Aluminium Lever Handles With Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 9.85 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch With One Dead Bolt And A Pair Of Lever Handles With Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 9.86 Providing And Fixing Bright Finished Brass Night Latch Including Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 9.87 Providing And Fixing Special Quality Bright Finished Brass Cupboard Or Wardrobe Locks With Four Levers Including Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) : 9.87.1 40 Mm 9.87.2 50 Mm 9.87.3 65 Mm 9.87.4 75 Mm 9.88 Providing And Fixing 50 Mm Bright Finished Brass Cup Board Or Wardrobe Knob With Necessary Screws ( Best Make Of Approved Quality ) 9.89 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete. 9.90 Providing And Fixing Bright Finished Brass Casement Window Fastener With Necessary Screws Etc. Complete. 9.91 Providing And Fixing Bright Finished Brass Casement Stays ( Straight Peg Type ) With Necessary Screws Etc. Complete : 9.91.1 300 Mm Weighing Not Less Than 330 Gms 9.91.2 250 Mm Weighing Not Less Than 280 Gms 9.91.3 200 Mm Weighing Not Less Than 240 Gms 9.92 Providing And Fixing Bright Finished Brass Hasp And Staple ( Safety Type ) With Necessary Screws Etc. Complete: 9.92.1 150 Mm 9.92.2 115 Mm 9.92.3 90 Mm 9.93 Providing And Fixing Cromium Plated Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete. 9.94 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm ) With Necessary Accessories And Screws Etc. Complete. 9.95 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm ) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 9.96 Providing And Fixing Chromium Plated Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles With Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 9.97 Providing And Fixing Chromium Plated Brass 100 Mm Mortice Latch With One Dead Bolt And A Pair Of Lever Handles With Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 9.98 Providing And Fixing Chromium Plated Brass Night Latch Including Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 9.99 Providing And Fixing Special Quality Chromium Plated Brass Cupboard Locks With Six Levers Including Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) Of : 9.99.1 Size 40 Mm 9.99.2 Size 50 Mm 9.99.3 Size 65 Mm 9.99.4 Size 75 Mm 9.100 Providing And Fixing Chromium Plated Brass 50 Mm Cupboard Or Wardrobe Knobs With Nuts Complete. 9.101 Providing And Fixing Chromium Plated Brass Sliding Door Bolts Isi Marked With Nuts And Screws Etc Complete. 9.101.1 300X16mm 9.101.2 250X16mm 9.102 Providing And Fixing Chromium Plated Brass Tower Bolts Isi Marked With Nuts And Screws Etc Complete. 9.102.1 400X10mm 9.102.2 300X10mm 9.102.3 250X10mm 9.102.4 200X10 Mm 9.102.5 150X10 Mm 9.102.6 100X10 Mm 9.103 Providing And Fixing Chromium Plated Brass Door Latch Isi Marked With Necessary Screws Etc Complete. 9.103.1 300X16x5mm 9.103.2 250X16x5mm 9.104 Providing And Fixing Chromium Plated Brass Night Latch Isi Marked With Necessary Screws Etc Complete. 9.105 Providing And Fixing Chromium Plated Brass Handles With Necessary Screws Etc. Complete: 9.105.1 125 Mm 9.105.2 100 Mm 9.105.3 75 Mm 9.106 Providing And Fixing Chromium Plated Brass Casement Window Fastener With Necessary Screws Etc. Complete. 9.107 Providing And Fixing Chromium Plated Brass Casement Stays ( Straight Peg Type ) With Necessary Screws Etc. Complete : 9.107.1 300 Mm Weighing Not Less Than 330 Gms 9.107.2 250 Mm Weighing Not Less Than 280 Gms 9.107.3 200 Mm Weighing Not Less Than 240 Gms 9.108 Providing And Fixing Isi Marked Aluminium Butt Hinges Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete: Note:- Aluminum Hinges Shall Not Be Used In Wooden Shutters. 9.108.1 125X75x4 Mm 9.108.2 125X63x4 Mm 9.108.3 100X75x4 Mm 9.108.4 100X63x4 Mm 9.108.5 100X63x3.2 Mm 9.108.6 75X63x4 Mm 9.108.7 75X63x3.2 Mm 9.108.8 75X45x3.2 Mm 9.109 Providing And Fixing Aluminium Sliding Door Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. Complete: 9.109.1 300X16 Mm 9.109.2 250X16 Mm 9.110 Providing And Fixing Aluminium Tower Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete: 9.110.1 400X10mm 9.110.2 300X10 Mm 9.110.3 250X10 Mm 9.110.4 200X10 Mm 9.110.5 150X10 Mm 9.110.6 100X10 Mm 9.111 Providing And Fixing Aluminium Pull Bolt Lock Anodised Isi Marked ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Bolts, Nut And Washers Etc. Complete. 9.112 Providing And Fixing 50Cm Long Aluminium Kicking Plate 100X3.15 Mm Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is :1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete. 9.113 Providing And Fixing Aluminium Handles Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete: 9.113.1 125 Mm 9.113.2 100 Mm 9.113.3 75 Mm 9.114 Providing And Fixing Aluminium Hanging Floor Door Stopper Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete. 9.114.1 Single Rubber Stopper 9.114.2 Twin Rubber Stopper 9.115 Providing And Fixing Aluminium Casement Window Stays Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete. 9.116 Providing And Fixing Aluminium Tee Channels ( Heavy Duty ) With Rollers, Stop End In Pelmets As Curtain Rod. 9.117 Providing And Fixing Aluminum U Beading Of Required Size To Pre-Laminated / Flush Door Shutter Including Fixing Etc. Complete As Per Direction Of Engineer-In-Charge. 9.118 Providing And Fixing Ptmt Handles With Necessary Screws Etc. Complete. 9.118.1 125X34x24 Mm Weighing Not Less Than 23 Gms. 9.118.2 150X34x24 Mm Weighing Not Less Than 26 Gms. 9.119 Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 9.119.1 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms. 9.119.2 100X75x10 Mm Fitted With 5.5 Mm Dia Ms Bright Bar Rod Weighing Not Less Than 53 Gms. 9.120 Providing And Fixing Ptmt Tower Bolts With 12 Mm One Piece Rod Inside And Necessary Screws Etc., Complete. 9.120.1 152X42x18 Mm Weighing Not Less Than 60 Gms. 9.120.2 202X42x18 Mm Weighing Not Less Than 78 Gms. 9.121 Providing And Fixing Ptmt Door Catcher Of Length 72 Mm And Dia. Of 42 Mm With Suitable Washers Weighing Not Less Than 33 Gms. 9.122 Providing And Fixing Ptmt Hanging Type Floor Door Stoper With Necessary Screws Etc Complete. 9.123 Providing And Fixing Wire Gauge Shutters Using Stainless Steel Grade 304 Wire Gauge With Wire Of Dia 0.5 Mm And Average Width Of Aperture 1.4 Mm In Both Directions For Doors, Windows And Clerestory Windows With Necessary Screws: 9.123.1 35 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.123.1.1 Second Class Teak Wood. 9.123.1.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.123.1.3 Kiln Seasoned Selected Class Of Sheesham Wood. 9.123.2 35 Mm Thick Shutters With Isi Marked Stainless Steel Butt Hinges Of Required Size. 9.123.2.1 Second Class Teak Wood. 9.123.2.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.123.2.3 Kiln Seasoned Selected Class Of Sheesham Wood. 9.123.3 30 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.123.3.1 Second Class Teak Wood. 9.123.3.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.123.3.3 Kiln Seasoned Selected Class Of Sheesham Wood. 9.123.4 30 Mm Thick Shutters With Isi Marked Stainless Steel Butt Hinges Of Required Size. 9.123.4.1 Second Class Teak Wood. 9.123.4.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.123.4.3 Kiln Seasoned Selected Class Of Sheesham Wood. 9.124 Providing And Fixing Fly Proof Stainless Steel Grade 304 Wire Gauge, To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.50 Mm All Complete. 9.124.1 With 2Nd Class Teak Wood Beading 62X19 Mm. 9.124.2 With 12 Mm Mild Steel U Beading. 9.125 Providing And Fixing Bamboo Jaffery / Fencing Consisting Of Superior Quality 25Mm Dia ( Average ) Half Cut Bamboo Placed Vertically And Fixed Together With Three Numbers Horizontal Running Members Of Haldu, Kail, Bija Wood In Scantling Of Section 50X25mm Fixed With Nails And G.I Wire On Existing Support Complete As Per Direction Of Engineer-In-Charge. 9.126 Providing And Fixing Wooden Moulded Corner Beading Of Triangular Shape To The Junction Of Panelling Etc. With Iron Screws, Plugs And Priming Coat On Unexposed Surface Etc. Complete 2Nd Class Teak Wood. 50X50mm ( Base And Height ) . 9.127 Providing And Fixing 2Nd Class Teak Wood Lipping / Moulded Beading Or Taj Beading Of Size 18X5mm Fixed With Wooden Adhesive Of Approved Quality And Screws / Nails On The Edges Of The Pre-Laminated Particle Board As Per Direction Of Engineer- In-Charge. 9.128 Providing And Fixing Bright Finished 100Mm Mortice Lock With 6 Levers Without Pair Of Handles For Aluminium Door With Necessary Screws Etc Complete ( Best Make Of Approved Quality ) As Per Direction Of Engineer-In-Charge. 9.129 Providing And Fixing Magnetic Catcher In Cupboard / Ward Robe Shutters Including Fixing With Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 9.129.1 Triple Strip Vertical Type. 9.129.2 Double Strip ( Horizontal Type ) . 9.130 Providing And Fixing Magic Eye In Door Shutters Including Fixing. Complete ( Best Make Of Approved Quality ) . 9.131 Providing And Fixing Powder Coated Telescopic Drawer Channels With Necessary Screws Etc. Complete As Per Directions Of Engineer-In-Charge. 9.131.1 300Mm Long 9.131.2 450Mm Long 9.131.3 500Mm Long 9.132 Providing And Fixing Sliding Arrangement In Racks / Cupboards / Cabinets Shutter By P / F Stainless Steel Rollers To Run Inside C Or E Aluminium Channel Section ( The Payment Of C Or E Channel Shall Be Made Separately ) 9.133 Providing And Fixing 12Mm Thick Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) . Panelling For Panelled Or Panelled And Glazed Shutters 25Mm To 40Mm Thick. 9.133.1 Marine Plywood Conforming To Is: 710 9.133.2 Fire Retardant Plywood Conforming To Is: 5509. 9.134 Providing And Fixing Decorative High Pressure Laminated Sheet Of Plain / Wood Grain In Gloss / Matt / Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is : 2046 Type S Including Cost Of Adhesive Of Approved Quality. 9.134.1 1.5 Mm Thick. 9.134.2 1.0 Mm Thick. 9.135 Providing And Fixing Cup Board Shutters 25Mm Thick, With Pre-Laminated Flat Pressed Three Layer Particle Board Or Graded Wood Particle Board Is: 12823 Marked Exterior Grade ( Grade L Type Ll ) Having One Side Decorative Lamination And Other Side Balancing Lamination Including Iind Class Teak Wood Lipping Of 25Mm Wide X12 Mm Thick With Necessary Screws And Bright Finished Stainless Steel Piano Hinges Complete As Per Direction Of The Engineer-In-Charge . 9.136 Providing And Fixing Cup Board Shutters With 25Mm Thick Veneered Particle Board Is : 3097 Marked Exterior Grade ( Grade I ) Of Approved Make Including Iind Class Teak Wood Lipping Of 25Mm Wide X 12 Mm Thick With Necessary Screws And Bright Finished Stainless Steel Piano Hinges Complete As Per Direction Of Engineer-In- Charge. 9.136.1 With Decorative Veneering On One Side And Commercial Veneering On Other Side. 9.136.2 With Non Decorative Veneering On Both Sides. 9.137 Providing And Fixing Factory Made Shutters Of 25 Mm Thick Pre-Laminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board With One Side Decorative Finish And Other Side Balancing Lamination Conforming To Is: 12823 Grade L Type Ll, Of Approved Design, And Edges Sealed With Water Resistant Paint And Lipped With Aluminium U Type Edge Beading All- Round The Shutter, Including Fixing With Angle Cleat, Grip Strip, Cadmium Plated Steel Screws Including Fixing Of Aluminium Hinges 100X63x4 Mm Etc. Complete As Per Architectural Drawing And Direction Of Engineer-In-Charge ( Cost Of U Beading And Hinges Will Be Paid For Separately ) . 9.138 Providing And Fixing In Wall Lining Mdf Board Medium Density Fibre Board Is: 14587:1998 Marked, Pre-Laminated One Side Decorative Lamination And Other Side Balancing Lamination, With Necessary Fixing Arrangement And Screws Etc. Complete. 9.138.1 12 Mm Thick. 9.138.2 18 Mm Thick. 9.138.3 25 Mm Thick. 9.139 Providing And Fixing 25Mm Thick Pre- Laminated Medium Density Fibre Board Exterior Grade ( Grade-I ) Is:14587:1998 Marked One Side Decorative To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand Including Isi Marked Nickeled Plated Bright Finishing M.S. Piano Hinges Is:3818 Marked With Necessary Screwed Complete 9.140 Providing And Fixing Skirting With Pre- Laminated Medium Density Fibre Board Exterior Grade ( Grade-I ) Is: 14587:1998 Marked, With Necessary Fixing Arrangements And Screws, Including Drilling Necessary Holes For Rawl Plugs Etc. And Edges To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand Complete. 9.140.1 18 Mm Thick 9.140.2 25 Mm Thick 9.141 Providing And Fixing Partition Upto Ceiling Height Consisting Of G.I. Frame And Required Board Including Providing And Fixing Of Frame Work Made Of Special Section Power Pressed / Roll Form G.I. Sheet To Be Provided At The Horizontal Joints Of Two Boards, Fixed To The Studs Using Metal To Metal Flat Head Screws, Including Jointing And Finishing To A Flush Finish With Recommended Jointing Compound, Jointing Tape, Angle Beads At Corner ( 25 Mm X 25 Mm X 0.5 Mm ) , Joint Finisher And Two Coats Of Primer Suitable For Board As Per Manufactures Specification And Direction Of Engineer In Charge All Complete. 9.141.1 75Mm Overall Thickness Partition With 12.5 Mm Thick Double Skin Fire Rated Glass Reinforced Gypsum ( Grg ) Plaster Board Conforming To Is: 2095: Part 3 1996 Board With Bis Certification Marks. 9.141.2 75Mm Overall Thickness Partition With 12.5 Mm Thick Double Skin Tapered Edged Plain Gypsum Plaster Board Conforming To Is:2095: Part I 1996 Board With Bis Certification Marks. 9.141.3 66Mm Overall Thickness Partition With 8Mm Thick Double Skin Calcium Silicate Board Made With Calcareous And Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process With Compressive Strength 225 Kg / Sq.Cm, Bending Strength 100 Kg. / Sq.Cm. 9.141.4 66Mm Overall Thickness Partition Using 8Mm Thick Double Skin Non- Asbestos Multipurpose Cement Board Reinforced With Cellulose Fibre Manufactured Through Autoclaving Process ( High Pressure Steam Cured ) As Per Is: 14862 With Suitable Fibre Cement Screw. 9.141.5 68Mm Overall Thickness Partition Using 9Mm Thick Heavy Duty Fibre Cement Board Double Skin Non Asbestos, Reinforced With Cellulose Fibre, Manufactured Through Autoclaving Proces ( High Presssure Steam Cured ) Type A, Category 4 Conforming To Is 14862:2000. ( For Wet Areas ) 9.141.6 70 Mm Overall Thickness Partition Using 10Mm Thick Double Skin Non-Asbestost Multipurpose Termite, Fire & Moisure Resistance ( Acoustic 30Db ) Cement Bonded Particle Board As Per Is: 14276 With Suitable Cement Bonded Board Screw. 9.142 Providing And Fixing, In Position Concealed G.I. Section For Wall Paneling Using Board Of Required Thickness Fixed On The W Profile ( 0.55Mm Thick ) Having A Knurled Web Of 51.55Mm And Two Flanges Of 26Mm Each With Lips Of 10.55 Mm, Placed @ 610Mm C / C With Fully Threaded Self- Tapping Dry Wall Screws. Board Is Fixed To The W Profile With 25 Mm Countersunk Ribbed Head Screws @ 200Mm C / C., All Complete As Per The Drawing And Directions Of Engineer-In-Charge The Joints Of The Boards Are Finished With Specially Formulated Jointing Compound And 48Mm Wide Jointing Tape To Provide Seamless Finish. 9.142.1 10 Mm Thick Tapered Edge Calcium Silicate Board Made With Calcareous And Siliceous Materials Reinforced With Cellulose Fibre Manufactured Through Autoclaving Process To Give Stable Crystalline Structure, With Compressive Strength 225 Kg / Sq.Cm, Bending Strength 100 Kg / Sq.Cm. 9.142.2 12 Mm Thick Gypsum Board Conforming To Is: 2095 Part-I. 9.142.3 8 Mm Thick Non-Asbestost Multipurpose Termite, Fire & Moisure Resistance Cement Bonded Particle Board As Per Is: 14276 With Suitable Cement Bonded Board Screw. 9.142.4 8Mm Both Side Factory Prelamianted Cement Bonded Particle Board As Per Is: 15786. 9.142.5 9Mm Thick Non Asbestos, Heavy Duty Fibre Cement Board Reinforced With Cellulose Fibre Manufactured Through Autoclaving Process ( High Pressure Steam Cured ) Type A, Category 4, Conforming To Is 14862. 9.143 Providing And Fixing Frame Work For Partitions / Wall Lining Etc. Made Of 50X50x1.6Mm Hollow Ms Tube, Placed Along The Walls, Ceiling And Floor In A Grid Pattern With Spacing @ 60 Cm Centre To Centre Both Ways ( Vertically And Horizontally ) Including Making Provision For Opening For Doors, Windows, Electrical Conduits, Switch Boards Etc., Including Providing With Two Coats Of Approved Steel Primer Etc. Complete, All As Per Direction Of Engineer- In-Charge. 9.144 Providing And Fixing Panelling Or Paneling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebated To Be Measured ) . Panelling For Panelled And Glazed Shutters 25Mm To 40Mm Thick: Pre-Laminated With Decorative Lamination On Both Side Exterior Grade - I Mdf Board 12 Mm Thick Confirming To Is:14587 9.145 Providing And Fixing Pre -Laminated Medium Density Fibre Board Exterior Grade ( Grade-I ) Is: 14587:1998 Marked, To Frame, Backing Or Studding With Screws Etc. Complete ( Frames, Backing Or Studding To Be Paid Separately ) . 9.145.1 Board 12 Mm Thick 9.145.2 Board 18 Mm Thick 9.146 Providing And Fixing Pre-Laminated Medium Density Fibre Board Is: 14587:1998 Marked, With One Side Decorative Lamination Other Side Balancing Lamination Grade-I ( Exterior Grade ) In Shelves With Screws And Fittings Wherever Required, Edges To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand ( Fittings To Be Paid Separately ) . 9.146.1 18 Mm Thick 9.146.2 25 Mm Thick 9.147 Providing And Installation Of Acoustical Wall Panelling Fabric Finish Hardened Square Edge, Fr Grade Fabric ( Colour As Approved By Egnineer In Charge ) Wrapped Soft Fibre Core ( Glass Fibre ) Panel Having Metal Framing, Of Size 600X2100x25mm Having Density 100-120Kgs / M3, Weight 3.0Kg / M2 Nrc Up To 0.9 Installed By Using Impaling Clip. Impaling Clips Are Attached Directly To The Wall / Frame Work With The Points Extending Outward. Then Panels Shall Positioned And Pressed Into Place. 9.148 Providing And Installation Of Acoustical Wall Panelling Wood Finish Slats Made Out Of Hdf Board , Melamine / Veneer Laminated Finish, Perforated Wooden Grooved Slats ( 2Mm Grooves @ 8Mm Centers ) / ( 2Mm Slats @16Mm Pitch ) / ( 2Mm Grooves @ 32Mm Centers ) / ( 2Mm Grooves @ 64Mm Centers ) , Aluminium Core Cross Channel Having Thickness 0.5Mm, Length 2400Mm, Web 15Mm And 27Mm, Depth 18Mm And Flanges Of 7Mm With Suitable Edge And Centre Brackets Is Then Fixed Perpendicular To The Cross Channel With The Help Of Fasteners At Every 400Mm Centers. Contractor To Provide Expansion Joints Of 3Mm At Every 5Mts Bothways. 9.149 Providing And Installation Of Paintble Acoustic Wall Panelling Consisting Of Strand Kerfed Edge Paint Finished As Approved By Engineer In Charge. Magnesite Bonded Wood Fiber Panels Of Size 600X2400x20mm Having Density 400Kg / M3, Weight 8- 20Kg / M2 Which Is Fixed To Gi Strut System. Fastened To Wall Positioned Horizontally In A Regular Manner At 600Mm Centers. Pvc Vinyl Core Uv Treated H-Spline Having Thickness 2Mm And Length 2400Mm To Be Fixed Perpendicular To The Cross Channel At 600Mm Centers. The Kerfed Edge Panels Shall Be Then Inserted Into The H-Spline Against Wall To Perfect Fit. 9.149.1 Wt. 8.20 Kg / M2 9.149.2 Wt. 4.2 Kg / M2 9.150 Providing And Fixing Plain Lining With Necessary Screws / Nuts And Bolts / Nails Including A Coat Of Approved Primer On One Face And Fixed On Wooden / Steel Frame Work Complete As Per Direction Of Engineer-In-Charge. ( Frame Work Shall Be Paid For Separately ) 12Mm Thick Commercial Ply Conforming To Is: 1328 Bwr Type. 9.151 Providing And Installation Of Acoustic Wall Panelling Consisting Of Soak Coard Of Selected Colours As Approved By Engineer In Charge. Kerf Edge Fabric Wrapped Wood Fiber Panels Of Size 600X2400x20mm Having Density 400Kgs / M3, Weight 4- 20Kg / M2 Installed By Using Gi Strut System. Pvc Vinyl Core Uv Treated H-Spline Having Thickness 2Mm And Length 2400Mm To Be Fixed Perpendicular To The Cross Channels At 600Mm Centers. Kerfed Edge Fabric Wrapped Panels Shall Be Then Inserted Into The H-Spline Against Wall To Perfect Fit. 9.152 Providing And Installation Of Acoustic Wall Panelling Consisting Of Soak Cord Of Selected Colours As Approved By Engineer In Charge, Square Edge Fabric Wrapped Wood Fiber Panels Of Size 600X1200x10mm Having Density 400Kgs / M3, Weight 4- 20Kg / M2 Installed By Using Gi Struts, Z Bars. Gi Z Bars Having 40Mm Height, Thickness 1.2Mm Is First Fixed Behind The Panels By Identifying Resin Spots By Using Suitable Fasteners.Clean Exposed Surfaces Of Wall And Ensure Walls Are In Plumb Line Before Installing On Wall ( Provide Necessary Packing Shims If Required ) . Soak Cord Square Edge Panels Shall Be Slided Into The Z Bars Fixed On Wall. 9.153 Providing And Installation Of Acoustic Wall Panelling Consisting Of Stretch Nrc By Using Fr Grade Nrc Fabric Of Size 1700Mm Width, Shall Be Stretched By Using Wooden Base 10Mm Thick, Rigid Vinyl Stretch Tracks Half Wrap / Full Wrap 25Mm And Midseam 300Mm Centers. The Fabric Is Stuck On The Align Tape ( By Removing The Protective Cover ) At The Same Time As Being Stretched And Tucked Into The Stretch Tracks And Secure Into The Locking Jaws So That It Will Be Smooth, Free Of Wrinkles With The Tucking Tools. Note -Minimum 50Mm Additional Fabric Is Required For Tucking Hence Maximum Module Width Would Be 1600Mm. 9.154 Providing And Installation Of Wall Panelling Consisting Of Square Edge Magnesia Core Panels Of Size 1100X2400x8mmmm Having Density 1000Kgs / M3, Weight 8Kg / M2 Installed By Using Gi Strut System. The Gi Struct System Includes Cross Channel Having Thickness 0.45Mm, Length 3600Mm, Knurled Web 40, Depth 10Mm And Equal Flanges Of 15Mm Is Fastened To Wall Positioned Horizontally In A Regular Manner At 600Mm C / C. The Panels To Be Fixed On The Cross Channel With Suitable Fasteners. 9.155 Supplying And Installation Of Magnesia Block 66 Mm Thick Drywall Partition Including Framework Includes Floor / Head Gi Channels Having Thickness 0.5Mm, Length 3600Mm, Equal Flanges Of 32Mm And Web Of 50Mm Fixed To Floor And Ceiling With Suitable Fasteners At 300Mm Centers Staggered. Second Layer Of Magenesia Oxide Block 8Mm Thick Should Be Fixed Other Side Of The Frame Work Similar Fashion As The First Layer. 3Mm Gap Should Be Maintained Between Boards.3 Mm Gap Shall Be Filled With Jointing Compound. Magnesia Oxide Block Shall Have Following Physical Charecterstics. 9.155.1 Using 8Mm Thick Magnesia Block 9.155.2 Using10mm Thick Magnesia Block 9.155.3 Using12mm Thick Magnesia Block 9.155.4 Using12mm Thick Magnesia Block 9.156 Add Extra For Providing And Fixing Thermal Insulation By Providing 50Mm Thick Synth Pf Having Dencity 1000 Gsm Within The Cavity Held In Position By Using Chicken Wire Mesh / Cross Bracing / Pasting To The Wall. 9.157 Providing And Laying Gypsum Panel Partitions 100Mm Thick With Water Proof Gypsum Panels Of Size 666X500x100mm, Made Of Calcite Phosphor Gypsum Fixed With Tongue And Groove, Jointed With Bonding Plaster As Per Manufacturers Specifications In Superstructure Above Plinth Level Up To Floor Ii Level. Gypsum Blocks Will Have A Minimum Compressive Strength Of 9.3 Kg / Cm2. 9.158 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below ( Tolerance ±1Mm ) , With Wall Thickness 2.0 Mm ( ± 0.2Mm ) , Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frame Reinforced By Galvanized M.S. Tube Of Size 19 X 19Mm And 1Mm ( ± 0.1 Mm ) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge: 9.158.1 Extruded Section Profile Size 48X40 Mm. 9.158.2 Extruded Section Profile Size 42X50 Mm. 9.159 Providing And Fixing Panelled Upvc Door Shutter To Existing Door Frames. 24 Mm Thick Factory Made Upvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm ( ± 0.2 Mm ) With Inbuilt Edging On Both Sides. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge. ( For W.C. And Bathroom Door Shutter ) . 9.160 Providing And Fixing Upvc Panelled Door Shutter Upvc 30 Mm Thick Factory Made Pvc Or Upvc Door Shutter Made Of Styles And Rails Of A Upvc Hollow Section Of Size 60X30 Mm And Wall Thickness 2 Mm ( ± 0.2 Mm ) , The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge. 9.161 Providing And Fixing 25Mm Thick Pvc Flush Door Shutters Made Out Of A One Piece Multi Chamber Extruded Pvc Section Of The Size Of 762Mmx25mm Or Less As Per Requirement With An Average Wall Thickness Of 1Mm ( ± 0.3Mm ) . Pvc Foam End Cap Of Size 23X10mm Are Provided On Both Vertical Edges To Ensure The Overall Thickness Of 25Mm. The Top And Bottom Edges Of The Shutter Are Covered With An End-Cap Of The Size 25Mmx11mm. Door Shutter Shall Be Reinforced With Special Polymeric Reinforcements As Per Required Specification And Direction Of Engineer-In- Charge To Take Up Necessary Hardware And Fixtures. Stickers Indicating The Locations Of Hardware Will Be Pasted At Appropriate Places. 9.162 Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100Mmx37mm With Wall Thickness 2Mm ( ±0.2Mm ) , With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos. Of Plastic Brackets Of Size 100Mmx37mm, Wall Thickness 2Mm ( +0.2Mm ) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100Mmx20 Mm, And Inserting 2 Nos. Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. 9.163 Providing And Fixing, Factory Made, Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75Mmx53 Mm, Having Wall Thickness 2.0Mm ( ±0.2Mm ) . Both Verticals Sides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28Mm X 30Mm X2mm Thickness ( ± 0.2 Mm ) And 75Mmx200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos. Of 125Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos. And Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge. 9.164 Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Extruded Printed And Laminated Section Having Overall Dimension 115Mm X 37Mm With Wall Thickness , Panels Of 100 X 20 Mm Printed And Laminated And Inserting 2 Nos. 6 Mm Dia. Bright Steel Rod Horizontally With Both Side Threaded And Tightened With Check Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. 9.165 Providing And Fixing Factory Made P.V.C. Door Frame Of Size 50X47mm With A Wall Thickness Of 5Mm, Made Out Of Extruded 5Mm Rigid Pvc Foam Sheet, Mitred At Corners And Joined With 2 Nos. Of 150Mm Long Brackets Of 15X15mm M.S. Square Tube, The Vertical Door Frame Profiles To Be Reinforced With 19X19mm M.S. Square Tube Of 19 Gauge, Epdm Rubber Gasket Weather Seal To Be Provided Through Out The Frame. The Door Frame To Be Fixed To The Wall Using M.S. Screws Of 65 / 100Mm Size, Complete As Per Manufacturers Specification And Direction Of Engineer-In- Charge. 9.166 Providing And Fixing Factory Made 30 Mm Thick Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19Mm X 19Mm For Styles And 15X15mm For Top And Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers And Joined Together With Solvent Cement Adhesive. An Additional 5Mm Thick Pvc Strip Of 20Mm Width Is To Be Stuck On The Interior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge. Manufacturer’S Specification And Drawing. 9.166.1 Plain Pvc Door Shutters. 9.166.2 Pre Laminated Pvc Door Shutters. 9.167 Providing And Fixing Factory Made Door Frame ( Single Rebate ) Made Out Of Single Piece Extruded Solid Pvc Foam Profile With Homogenous Fine Cellular Structure Having Smooth Outer Integral Skin Having 62 Mm Width And 32 Mm Thickness, Frame Will Be Mitred And Jointed With Self Driven Self Tapping Screws Of Size 38 Mm X 4 Mm And Pvc Solvent Cement, Including Fixing The Frame To Wall With Suitable Dia And Length Anchor Fastener As Per Manufacturer’S Specification And Direction Of Engineer-In-Charge. 9.168 Providing And Fixing Factory Made 30 Mm Thick Door Shutter Made Of Solid Pvc Foam Profile. The Styles And Rails Shall Be Of Size 75 Mmx30 Mm Having Wall Thickness 5 Mm. The Styles, Top And Bottom Rails Shall Have One Side Wall Thickness Of 15 Mm Integrally Extruded In The Middle Of The Lock Rail And Fixed With Styles With The Help Of Pvc Solvent Cement And Self Driven Self Tapping Screws Of Size 100 Mmx8 Mm Complete As Per Manufacturers Specifications And Direction Of Engineer-In-Charge: 9.168.1 Non Decorative Finish. 9.168.2 Decorative Finish ( Both Side Wood Grained Finish ) . 9.169 Providing And Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door / Window / Ceosetory Windows And Other Frames / Chowkhat Comprising Of Virgin Polymer Of K Value 58-60 Of Class A Category With Property Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixed In Position With M.S. Hold Fast / Lugs / S.S.Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In-Charge. ( M.S. Hold Fast / Lugs Or S.S. Dash Fasteners Shall Be Paid Separately ) 9.169.1 Single Rebate ( 75 Mm X 50 Mm ) 9.169.2 Single Rebate ( 100 Mm X50 Mm ) 9.169.3 Single Or Double Rebate ( 125 Mm X 65 Mm ) 9.170 Providing And Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter Of Required Size Comprising Of Virgin Polymer Of K Value 58-60 ( Suspension Grade ) , Calcium Carbonate And Natural Fibers ( Wood Powder / Rice .Husk / Wheat Husk ) And Non Toxic Additives Property Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, All As Per Direction Of Engineer-Incharge. ( Note: Stainless Steel Butt Hinges And Necessary S.S Screws Shall Be Paid Separately ) 9.170.1 24 Mm Thick Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter 9.170.2 28 Mm Thick Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter 9.170.3 30 Mm Thick Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter 9.170.4 35 Mm Thick Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter 9.171 Providing And Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Decorative Type Flush Door Shutter Of Required Size Comprising Of Virgin Polymer Of K Value 58-60 Of Approved Design Pasted With Hot Melt Adhesive On Both Faces Of Shutter And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, All As Per Direction Of Engineer-Incharge. ( Note: Stainless Steel Butt Hinges And Necessary S.S Screws Shall Be Paid Separately ) . 9.171.1 30 Mm Thick Wpc ( Wood Polymer Composite ) Solid Decorative Type Flush Door Shutter 9.171.2 35 Mm Thick Wpc ( Wood Polymer Composite ) Solid Decorative Type Flush Door Shutter 9.172 Providing And Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Board One Side White Colour And Other Side Of Board Laminated With Pvc Foil Of Minimum 14 Micron Thickness Of Approved Design Pasted With Property Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixing With Stainless Steel Piano Hinges / Soft Close Clip On Concealed Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, All As Per Direction Of Engineer-In-Charge. ( Note: Stainless Steel Piano Hinges / Soft Close Clip On Concealed Hinges And Necessary S.S Screws Shall Be Paid Separately ) 9.172.1 18 Mm Thick 9.172.2 25 Mm Thick 9.173 Providing And Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite Solid Plain White Color Board For Backing Of Cupboards And Bathrooms / Kitchen Cabinets Etc. Of Required Size Comprising Of Virgin Polymer Of K Value 58-60 ( Suspension Grade ) , And Screw Withdrawal Strength Of 1800 N ( Face ) & 900 N ( Edge ) , Minimum Compressive Strength 50 N / Mm2, Modulus Of Elasticity 850 N / Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof, Water / Moisture Proof And Fire Retardant And Fixing With Stainless Steel Screws Etc. All As Per Direction Of Engineer-In-Charge. ( Note: Stainless Steel Screws Shall Be Paid Separately ) 9.173.1 6 Mm Thick 9.173.2 12 Mm Thick 9.174 Providing And Fixing Factory Made 18 Mm Thick Single Extruded Wpc ( Wood Polymer Composite ) Solid Plain White Colour Board Jali Cnc ( Computer Numeric Control ) Routed Of Approved Design By Engineer-In -Charge Which Are Machine Cut For Duct / Shaft Covering, Partitions And Facades Comprising Of Virgin Polymer Of K Value 58-60 Of Approved Steel Primer, Placed At Grid Made At 1.0 X 1.0 M Or As Per Requirement At Site With Necessary Stainless Steel Fasteners And Ss Screws Etc., All Complete As Per Direction Of Engineer-In-Charge. ( Note: M.S ( Mild Steel ) Framework With Priming Coat And Necessary Ss Fasteners And Ss Screws Shall Be Paid Separately. 9.175 Providing And Fixing Pvc Door Frame Of Size 50X47mm With A Wall Thickness Of 5 Mm ( ±0.2 Mm ) Made Out Of Single Piece Extruded Pvc Profile, With Mitred Cut Joints And Joint With 2Nos Of Pvc Bracket Of Size 40X20mm M.S. Rectangular Tube Of 0.8 Mm , Including Providing Epdm Rubber Gasket Weather Seal Throughout The Frame, Including Jointing 5Mm Pvc Frame Strip With Pvc Solvent Cement On The Back Of The Profile. The Door Frame To Be Fixed To The Wall Using 8X100mm Long Anchor Fasteners Complete, All As Per Manufacturer’S Specification And Direction Of Engineer -In- Charge. 9.176 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Made Out Of Single Piece Extruded Soild Pvc Profiles, 5Mm ( ±0.2Mm ) Thick, Having Styles And Rails ( Except Lock Rail ) Of Size 95 Mmx 35 Mm X 5 Mm, Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered ( On Both Side ) , Having One Side Thickness Of 15 Mm Solid Core In Middle Of Rail Section Integrally Extruded, Fixing The Styles And Rails With The Help Of Solvent And Self Driven Self Tapping Screws Of 125 Mm X11 Mm, Including Providing 5Mm Single Piece Solid Pvc Extruded Sheet Inserted In The Door As Panel, All Complete As Per Manufacturers Specification And Direction Of Engineer-In- Charge . 9.176.1 Non Decorative Finish ( Matt Finish ) . 9.176.2 Decorative Finish ( Wood Grained Finish ) . 9.177 Providing And Fixing Pvc Rigid Foam Sheet 1Mm Thick On Existing Door Shutters ( Bathroom And W.C. Doors ) Using Synthetic Rubber Based Adhesive. 9.178 Providing And Fixing Fibre Glass Reinforced Plastic ( Frp ) Door Frames Of Cross-Section 90Mm X 45Mm Having Single Rebate Of 32Mmx15mm To Receive Shutter Of 30Mm Thickness .The Laminate Shall Be Moulded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat .Doorframe Laminate Shall Be 2Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fibreglass From All Sides. Ms Stat Shall Be Provided 9.179 Providing And Fixing To Existing Door Frames. 30 Mm Thick Glass Fibre Reinforced Plastic ( Frp ) Panelled Door Shutter Of Required Colour And Approved Brand And Manufacture, Made With Fire - Retardant Grade Unsaturated Polyester Resin, Moulded To 3 Mm Thick Frp Laminate For Forming Hollow Rails And Styles, With Wooden Frame And Suitable Blocks Of Seasoned Wood Inside At Required Places For Fixing Of Fittings, Cast Monolithically With 5Mm Thick Frp Laminate For Panels Conforming To Is: 14856 Including Fixing To Frames. 9.180 Providing And Fixing Door Frame Frp 30Mm Thick Fiberglass Reinforced Plastic ( F.R.P. ) Flush Door Shutter In Different Plain And Wood Inish Made With Fire Retardant Grade Unsaturated Polyurethane Foam ( Puf ) / Polystyrene Foam To Be Used As Filler Material Throughout The Hollow Panel, Casted Monolithically With Testing Parameters Of F.R.P. Laminate Conforming To Table - 3 Of Is: 14856, Complete As Per Direction Of Engineer-In-Charge. 9.181 Providing And Fixing Factory Made Fibreglass Reinforced Plastics ( F.R.P. ) Chajja 4Mm Thick Of Required Colour, Size And Design Made By Resin Transfer Moulding ( Rtm ) Frp Chajja Should Be Manufactured Using Unsaturated Polyester Resin As Per Is: 6746 Duly Reinforced With Fibre Glass Chopped Strand Mat ( Csm ) As Per Is: 11551 Complete With Protective Gel Coat U / V Coating On Top For Complete Resistance From The Extreme Of Temperature, Weather And Sunlight. 9.182 Providing And Fixing Fire Resistant Door Frame Of Section 143X57 Mm Having Built In Rebate Made Out Of 16 Swg G.I.Sheet ( Zinc Coating Not Less Than 120 Gm / Sqm ) Duly Filled With Vermuculite Based Of Size 10X4 Mm ( Minimum ) Alround The Frame And Fixing With Dash Fastener Of Approved Size And Make, Including Applying A Coat Of Approved Brand Fire Resistant Primer Etc. Complete As Per Direction Of Engineer-In- Charge ( Dash Fastener To Be Paid For Separately ) . 9.183 Providing And Fixing 50 Mm Thick Glazed Fire Resistant Door Shutters Of 60 Minutes Fire Rating Conforming To Is:3614 ( Part-Ii ) Tested And Certified As Per Laboratory Approved By Engineer-In-Charge With Suitable Mounting On Door Frame, Consisting Of Vertical Styles, Lock Rail, Top Rail 100Mm Wide, Bottom Rail 200Mm Wide, Made Out Of 16 Swg G.I.Sheet ( Zinc Coating Not Less Than 120 Gm / M2 ) Duly Filled Fr Insulation Material And Fixing With Necessary Stainless Steel Ball Bearing Hinges Of Approved Make, Including Applying A Coat Of Approved Fire Resistant Primer Etc. All Complete As Per Direction Of Engineer-In-Charge ( Panneling To Be Paid For Separately ) . 9.184 Providing And Fixing Glazing In Fire Resistant Door Shutters, Fixed Panels, Ventilators And Partitions Etc., With G.I. Beading Of Appropriate Size Made Out Of 20 Swg G.I.Sheet ( Zinc Coating Not Less Than 120 Gm / M2 ) , Fire Resistant Sealant, Including Applying A Coat Of Approved Fire Resistant Primer On G.I. Beading Etc. Complete All As Per Direction Of Engineer- In-Charge. With Clear Fire Resistant Glass Panes 6Mm Thick Of Approved Brand, Having Minimum 60 Minutes Fire Resistance. 9.185 Providing And Fixing Panic Bar / Latch ( Double Point ) Fitted With A Single Body, Trim Latch And Lock On Back Side Of The Panic Latch Of Reputed Brand And Manufacture To Be Approved By The Engineer- In- Charge, All Complete. 9.186 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Exturded Sections, Of Size 65 Mmx55 Mm With Wall Thickness 2.0 Mm ( ±0.2 Mm ) , Corners Of The Door Frame To Be Mitred Cut And Jointed With Plastic Brackets And Stainless Steel Screws, Reinforcing Hinge Side Vertical Of The Frames With Pvc Profile Of Size 28 Mmx30 Mm Having Wall Thickness 2 Mm ( ±0.2Mm ) , Including Providing And Fixing 3 Nos. Of 125 Mm Long Stainless Steel Hinges To The Frame, Fixing The Frame With Jamb With Required Number And Size Of Anchor Dash Fastners, All Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge. 9.187 Providing And Fixing, Upvc Factory Made, White Colour Casement / Sliding Window And Door Made Of Extruded Profiles. Profiles Of Frames And Sash Will Be Mitered Cut And Fusion Welded At All Corners Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc., Making Arrangement For Fixing Of Hardware, Epdm Gasket, 1.2 ± 0.2Mm Thick Galvanised Steel Profile To Be Inserted In Required Profile, Frame Will Be Fixed To The Wall With 8 Mmx100 Mm Long Fasteners, All Complete As Per Direction Of Engineer-In-Charge. ( Glazing, Hardware Hinges And Fitting Etc. To Be Paid Separately. ) 9.187.1 Casement Window ( Outward / Inward Opening ) With Hinge System. 9.187.1.1 Frame ( 50 Mm X 50Mm ) 9.187.1.2 Sash ( Style And Rail ) ( 62 Mm X 34 Mm ) 9.187.1.3 Mullion ( Intermediate Section ) ( 66Mm X 50 Mm ) 9.187.1.4 ‘T Profile ( One Vertical Length In Between Two Shutters ) ( 24Mm X 34.5Mm ) 9.187.1.5 Glazing Bead ( 12Mm X 18Mm ) 9.187.2 Casement Window ( With Friction Hinge And Outward Opening ) 9.187.2.1 Casement Frame ( 67Mm X 62Mm ) 9.187.2.2 Casement Window Sash / Mullion ( 67Mm X75mm ) ( Style, Rail And Intermediate Section ) 9.187.2.3 Casement Glazing Bead ( 35Mm X 18 Mm ) 9.187.3 Sliding Window ( Two Track, 2 / 4 Shutters ) 9.187.3.1 Two Track Sliding Frame ( 67Mm X 52Mm ) 9.187.3.2 Sliding Window Sash ( 60Mm X 44Mm ) 9.187.3.3 Sliding Interlock For Window ( One Vertical Length In Each Shutter ) ( 45.5 Mm X 28 Mm ) 9.187.3.4 Sliding Glazing Bead ( 35 Mm X 18 Mm ) 9.187.4 Sliding Door ( Two Track, 2 / 4 Shutters ) 9.187.4.1 Two Track Sliding Frame ( 67Mm X 52Mm ) 9.187.4.2 Sliding Door Sash ( 80Mm X 44Mm ) 9.187.4.3 Sliding Interlock For Door ( One Vertical Length In Each Shutter ) ( 45.5 Mm X 28 Mm ) 9.187.4.4 Sliding Glazing Bead ( 35 Mm X 18 Mm ) 9.188 Providing And Fixing Stainless Steel ( Ss- 304 Grade ) Friction Hinges To The Side / Top Hung Upvc Windows, Of Approved Quality With Necessary Stainless Steel Screws Etc. As Per Direction Of Engineer-In-Charge. 9.188.1 200 X 19 X 1.9 Mm 9.188.2 250 X 19 X 1.9 Mm 9.188.3 300 X 19 X 1.9 Mm 9.188.4 350 X 19 X 1.9 Mm 9.188.5 400 X 19 X 1.9 Mm 9.189 Providing And Fixing Casement Handle Made Of Zinc Alloyed ( White Powder Coated ) For Upvc Casement Window With Necessary Screws Etc. Complete. 9.190 Providing And Fixing Zinc Alloyed ( White Powder Coated ) Touch Lock For Upvc Sliding Window With Necessary Screws Etc. Complete. 9.191 Providing And Fixing Steel Roller For Upvc Sliding Window With Necessary Screws Etc. Complete. 9.192 Providing And Fixing Steel Roller For Upvc Sliding Door With Necessary Screws Etc. Complete. 9.193 Providing And Fixing Steel ( White Powder Coated ) Crescent Lock For Upvc Sliding Window / Door With Necessary Screws Etc. Complete. 9.194 Providing And Fixing Factory Made Upvc White Colour Casement / Casement Cum Fixed Glazed Windows Comprising Of Upvc Multi-Chambered Frame, Sash And Mullion ( Where Ever Required ) Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section And Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge. ( Single / Double Glass Panes And Silicon Sealant Shall Be Paid Separately ) Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerancein Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. 9.194.1 Casement Window Single Panel With S.S. Friction Hinges ( 300 X 19 X 1.9 Mm ) , Made Of ( Small Series ) Frame 47 X 50 Mm & Sash 47 X 68 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glass Pane Glazing Bead Of Appropriate Dimension. ( Area Of Window Upto 0.75 Sqm. ) 9.194.2 Casement Window Double Panels With S.S. Friction Hinges ( 300 X 19 X 1.9 Mm ) Made Of ( Small Series ) Frame 47 X 50 Mm, Sash 47 X 68 Mm & Mullion 47 X 68 Mm All Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. ( Area Of Window Above 0.75 Sqm Upto 1.50 Sqm ) . 9.194.3 Casement Window Double Panels With Top Fixed With S.S. Friction Hinges ( 350 X 19 X 1.9 Mm ) Made Of ( Small Series ) Frame 47 X 50 Mm, Sash 47 X 68 Mm & Mullion 47 X 68 Mm All Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. ( Area Of Window Upto 2.50 Sqm ) . 9.194.4 Casement Window Single Panel With S.S. Friction Hinges ( 400 X 19 X 1.9 Mm ) Made Of ( Big Series ) Frame 67 X 60 Mm & Sash 67 X 80 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Window Above 0.75 Sqm. ) 9.194.5 Casement Window Duble Panel With S.S. Friction Hinges ( 400 X 19 X 1.9 Mm ) Made Of ( Big Series ) Frame 67 X 60 Mm & Sash 67 X 80 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Window Above 1.50 Sqm. ) 9.194.6 Casement Cum Fixed Panel Window Having Both And Single Casement Panel, Middle Fixed Panels And At Top Completely Fixed Ventilator With S.S. Friction Hinges ( 350 X 19 X 1.9 Mm ) Made Of ( Big Series ) Frame 67 X 60 Mm & Sash 67 X 80 Mm & Mullion 67 X 80 All Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Window Above 3.00 Sqm. Upto 5.00 Sqm. ) 9.195 Providing And Fixing Factory Made Upvc White Colour Fixed Glazed Windows / Ventilators Comprising Of Upvc Multi- Chambered Frame And Mullion ( Where Ever Required ) Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Forming Process Of Required Length ( Shape & Size According To Upvc Profile ) , Upvc Extruded Glazing Beads Of Appropriate Dimension, Epdm Gasket, G.I Fasteners 100 X 8 Mm Size For Fixing Frame To Finished Wall, Plastic Packers, Plastic Capsof Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge. ( Single / Double Glass Panes And Silicon Sealant Shall Be Paid Separately ) . Note: - For Upvc Frame, Sash And Mullion Extruede Profiles Minus 5% Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. 9.195.1 Fixed Window / Ventilator Made Of ( Small Series ) Frame 47 X 50 Mm & Mullion 47 X 68 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. ( Area Upto 0.75 Sqm. ) 9.196 Providing And Fixing Made Upvc White Colour Casement / Casement Cum Fixed Glazed Door Comprising Of Upvc Multi- Chambered Frame, Sash And Mullion ( Where Ever Required ) Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Forming Process Of Required Length Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer- In-Charge. ( Single / Double Glass Panes And Silicon Sealent Shall Be Paid Separately ) . Note: - For Upvc Frame, Sash And Mullion Extruede Profiles Minus 5% Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. 9.196.1 Casement Door With 3D Hinges Made Of ( Big Series ) Frame 67 X 64 Mm & Sash 67 X 110 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Door Upto 2.00 Sqm ) . 9.196.2 Casement Door With Top Hung Ventilator With 3D And S.S. Friction Hinges ( 400 X 19 X 1.9 Mm ) Made Of ( Big Series ) Frame 67 X 64 Mm, Sash 67 X 110 Mm & Mullion 67 X 80 Mm All Having Wall Thickness Of 2.3 ±. 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Door Upto 2.50 Sqm ) . 9.197 Providing And Fixing Factory Made Upvc White Colour Sliding Glazed Window Upto 1.50 M In Height Dimension Comprising Of Upvc Multi-Chambered Frame With In- Built Roller Track And Sash Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Forming Process Of Required Length Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge. ( Single / Double Glass Panes, Wire Mesh And Silicon Sealent Shall Be Paid Separately ) Note: - For Upvc Frame, Sash And Mullion Extruede Profiles Minus 5% Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. 9.197.1 Two Track Two Panels Sliding Window Made Of Frame 52 X 44 Mm &Sash 32 X 60 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. ( Area Of Window Upto 1.75 Sqm ) 9.197.2 Three Track Three Panels Sliding Window With Fly Proof Ss Wire Mesh ( Two Nos. Glazed & One No. Wire Mesh Panels ) Made Of Frame 92 X 44 Mm & Sash 32 X 60 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension ( Area Of Window Upto 1.75 Sqm ) . 9.197.3 Two Track Two Panels Sliding Window Made Of Frame 67 X 50 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension ( Area Of Window Above 1.75 Sqm Upto 2.50 Sqm ) . 9.197.4 Three Track Three Panels Sliding Window With Fly Proof S.S Wire Mesh ( Two Nos. Glazed & One No. Wire Mesh Panels ) Made Of Frame 116 X 45 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Window Above 1.75 Sqm ) . 9.197.5 Three Track Three Panels Sliding Window Made Of Frame 116 X 45 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ±0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Window Above 1.75 Sqm ) 9.198 Providing And Fixing Factory Made Upvc White Colour Sliding Glazed Window Above 1.50 M In Height Dimension Comprising Of Upvc Multi-Chambered Frame With In-Built Roller Track And Sash Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Forming Process Of Required Length Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge. ( Single / Double Glass Panes, Wire Mesh And Silicon Sealent Shall Be Paid Separately ) . Note: - For Upvc Frame, Sash And Mullion Extruede Profiles Minus 5% Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. 9.198.1 Two Track Two Panels Sliding Window Made Of Frame 67 X 50 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Window Above 2.50 Sqm Upto 4.00 Sqm ) . 9.198.2 Two Track Four Panels Sliding Window Made Of Frame 67 X 50 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Window Above 4.00 Sqm Upto 8.00 Sqm ) . 9.199 Providing And Fixing Factory Made Upvc White Colour Sliding Glazed Door Comprising Of Upvc Multi-Chambered Frame With In-Built Roller Track And Sash Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Madafter Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer- In-Charge. ( Single / Double Glass Panes, Wire Mesh And Silicon Sealent Shall Be Paid Separately ) .Note: - For Upvc Frame And Sash Extruded Profiles Minus 5% Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. 9.199.1 Two Track Two Panels Sliding Door Made Of Frame 67 X 50 Mm & Sash 46 X 82 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Door Above 2.00 Sqm Upto 10.00 Sqm ) . 9.199.2 Two Track Four Panels Sliding Door Made Of Frame 67 X 50 Mm & Sash 46 X 82 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Door Above 8.00 Sqm Upto10.00 Sqm ) . 9.199.3 Three Track Three Panels Sliding Door Made Of Frame 116 X 45 Mm & Sash 46 X 82 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Door Above 5.00 Sqm ) 9.199.4 Three Track Three Panels Sliding Door With Fly Proof S.S Wire Mesh ( Two Nos. Glazed & One No. Wire Mesh Panels ) Made Of Frame 116 X 45 Mm & Sash 46 X 82 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. ( Area Of Door Above 2.00 Sqm Upto 5.00 Sqm ) 9.200 Providing And Fixing 30Mm Thick Factory Made Solid Panel Prelaminated Pvc Internal Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 40Mm X 20Mm For Styles Top, Lock And Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture Pvc Beading As Gap Insert Below Top And Bottom Rail Joined Together Using Solvent Cement Adhesive. An Additional 5Mm Thick Prelaminated Pvc Strip Of 20Mm Width Is To Be Stuck On The Interior Side Of The ‘C’ Channel Using Pvc Solvent Cement Adhesive Etc. Complete As Per Direction Of Engineer-In- Charge. Manufacturer’S Specification And Drawing. 30 Mm Thick Pre Laminated Pvc Door Shutters. 9.201 Providing And Fixing Factory Made Integral Pvc Flush Door Shutter Made From Rigid Pvc Foam Sheet ( Single Extruded ) With Density Not Less Than 600 Kg / Cum, Conforming To Is: 2380 Part 14 For Screw Holding Strength With Celluka Finish Surfaces On Both Sides At The Manufacturing Process Itself, Manufactured By An Iso : 9001 -2000 Certified Company. 9.201.1 24 To 25 Mm Thick Plain Solid Pvc Flush Door Shutter 9.201.2 28 To 30 Mm Thick Plain Solid Pvc Flush Door Shutter 9.202 Providing And Fixing Factory Made Pre Laminated Solid Pvc Flush Door Shutters 28 To 30 Mm Thick Made From Co-Extruded Three Layer Rigid Pvc Foam Sheet With Density Not Less Than 600 Kg / Cum, Conforming To Is: 2380 Part 14, For Screw Holding Strength And Outer Layers Laminated On Both Sides By Laminated Sheet With Density Not Less Than 1400 Kg / Cum, Lamination Shall Be At The Manufacturing Process Itself And Manufactured By An Iso: 9001-2000 Certified Company. 9.202.1 1Mm Thick Laminated Sheet 9.202.2 0.12 Mm Thick Laminated Sheet 9.203 Providing And Fixing Isi Marked Factory Made Flush Door Shutters Conforming To Is: 2202 ( Part-I ) Laminated Type, Core Of Block Board Construction With Kiln Seasoned And Chemically Treated 2Nd Class Hard Wood Battens With Well Matched 3Mm Thick Commercial 3Ply Veneering Consisting Of Vertical Grains, Cross Bands Withing Frame Of Door / Cupboards And Shall Be Stamped By The Manufacturer To Display Name Of Manufacturer, Batch Number Of Product And Conformity With Is: 2202. The Rate Shall Be Inclusive Of All Material And Labour Complete And As Per Specification And Dirction Of Engineer-In-Charge. 9.203.1 35Mm Thick Including 4 Nos. 100Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.203.2 35Mm Thick Including 3 Nos. 100Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.203.3 25Mm Thick ( For Cupboard ) Including 3 Nos. 75Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 9.204 Providing And Fixing Isi Marked Factory Made Flush Door Shutters Conforming To Is: 2202 ( Part-I ) Non Decorative Type, Core Of Block Board Construction With Kiln Seasoned And Chemically Treated 2Nd Class Hard Wood Battens ( Strips ) And Frame Of Kiln Seasoned And Chemically Treated, Finger Jointed Cross Bands Including All Material And Labour Complete As Per Specification And Direction Of Engineer-In- Charge. Spacing Of Finger Joints In Wood As Above Shall Not Be Less Than 50Cm. Each Shutter Shall Be Factory Made To The Exact Opening Size Within Frame Of Doors / Cupboards And Shall Be Stamped By The Manufacturer To Display Name Of Manufacturer, Batch Number Of Product And Confirmity With Is:2202. 9.204.1 35Mm Thick Including 4 Nos. 100Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary. 9.204.2 30Mm Thick Including 3 Nos. 100Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.204.3 25Mm Thick Including 3 Nos. 100Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.205 Deduct For Not Providing 2Nd Class Teak Wood Batten Lipping In Factory Made Shutters I.E. Item No 9.203 And 9.204. 9.206 Providing & Fixing Acrylic Solid Surface In Thickness 4 / 6 / 12 Mm Of Approved Colour Made Out Of Non-Porous Surfacing Material Homogeneously Composed Of ± 1 / 3 Acrylic Resin ( Also Known As Polymethyl Methacrylate -Pmma ) , And ± 2 / 3 No Extra Shall Be Paid For Joint Adhesive, Silicon Or Related Accessories And For Transportation. Item Should Cover 5 Years, Commercial Warranty Of Product As Per Fcws Norms. The Product Should Be Uv Protected For Exterior Applications & Lga Hyginene Tested Anti Bacterial For Health Care Application Areas. Area Of Application Are Table Tops, Exterior Facade Cladding, Health Care Areas Like Modular Operation Theater Hospital Scrubs, Wash Basins, Partition & Paneling, Laboratory Commercial Show Room, Hotels, Office & Residential Areas. 9.206.1 Acrylic Solid Surface Sheet – Glacier White Designer White 9.206.1.1 6 Mm Thick Sheet 9.206.1.2 12 Mm Thick Sheet 9.206.2 Acrylic Solid Surface Sheet - Any Solid Colours / Hospital Use Medi Blue 9.206.2.1 6 Mm Thick Sheet 9.206.2.2 12 Mm Thick Sheet 9.206.3 Acrylic Solid Surface Sheet - Any Other 9.206.3.1 6 Mm Thick Sheet 9.206.3.2 12 Mm Thick Sheet 9.207 Providing And Fixing Of 8 Mm Thick Non Asbestos Multipurpose Board Reinforced With Cellulose Fibers For Wall Cladding Will Consist Of Following Operations:1. Fixing Of A Layer Of 6Mm Moisture / Fire Resistance Heavy Duty Fibre Cement Boards Over Above Mentioned 6 Mm Heavy Duty Fibre Cement Board With The Help Of 25Mm Self Drilling, Self Tapping Fibre Cement Screws @ 300Mm C / C. All External Corners Are To Be Protected With The Use Of Suitable Corner Profile Of Gi Or Pvc. All Above Operation Is To Be Done In Order And As Directed By Engineer-In-Charge. ( Frame Work To Be Paid Separately ) . 9.208 Providing And Fixing Is Marked Factory Made Veneer High Density Fibre ( Hdf ) Flush Door Shutters Conformity To Is: 15380 ( 2003 ) , Eco-Friendly, Termite Resistant, Borer Free, Anti Warping Phenol Formaldehyde ( Pf ) , Decorative Designe Moulded Or Rate Shall Be Inclusive Of All Material And Labour Complete As Per Specifications And Direction Of Engineer-In-Charge. Material Supply Company’ Gujcon, Century, Green Shall Be Registered By Bureau Of Indian Standards, Member Of Indian Green Building Council, Iso 9001, Iso 14001 ( Environment Management System ) , National Small Industries Corporation ( Nsic ) , Sme Rating Agency Of Indian Ltd. ( Smera ) , Dun And Bradstreet ( D&B ) . 9.208.1 35 Mm Thick Including 4 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.208.2 30 Mm Thick Including 3 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.208.3 25 Mm Thick Isi Marked Heavy Weight Nickel Plated Bright Finished M.S. Piano Hinges With Screws. 9.209 Providing And Fixing Is Marked Factory Made Veneer High Density Fibre ( Hdf ) Flush Door Shutters Conformity To Is:15380 ( 2003 ) , Eco-Friendly, Termite Resistant Borer Free, Anti Warping Phenol Formaldehyde ( Pf ) , Non Decorative Designe Moulded And Labor Complete As Per Specifications And Direction Of Engineer-In- Charge. Material Supply Company Shall Be Registered By Bureau Of Indian Standards, Member Of Indian Green Building Council, Iso 9001, Iso 14001 ( Environment Management System ) , National Small Industries Corporation ( Nsic ) , Sme Rating Agency Of Indian Ltd. ( Smera ) , Dun And Bradstreet ( D&B ) . 9.209.1 35 Mm Thick Including 4 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.209.2 30 Mm Thick Including 3 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws 9.209.3 25 Mm Thick Isi Marked Heavy Weight Nickel Plated Bright Finished M.S. Piano Hinges With Screws. 9.210 Providing And Fixing Is Marked Factory Made High Density Fibre ( Hdf ) Flush Door Shutters Conformity To Is:15380 ( 2003 ) , Eco-Friendly, Termite Resistant Borer Free, Anti Warping Phenol Formaldehyde ( Pf ) , 2 And 4 Panel Designe Moulded Or Plain Construction With Particle Board Shall Be Inclusive Of All Material And Labour Complete As Per Specifications And Direction Of Engineer-In-Charge. Material Supply Company Shall Be Registered By Bureau Of Indian Standards, Member Of Indian Green Building Council, Iso 9001, Iso 14001 ( Environment Management System ) , National Small Industries Corporation ( Nsic ) , Sme Rating Agency Of Indian Ltd. ( Smera ) , Dun And Bradstreet ( D&B ) . 9.210.1 35 Mm Thick Including 4 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.210.2 30 Mm Thick Including 3 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.211 Hdf Decorative Prelaminated Pine Wood Panel Door With Glass / Wiremash:- Providing And Fixing Is Marked Factory Made Veneer High Density Fibre ( Hdf ) Flush Door Shutters Conformity To Is:15380 ( 2003 ) , Eco-Friendly, Termite Resistant Borer Free, Anti Warping Phenol Formaldehyde ( Pf ) , The Rate Shall Be Inclusive Of All Material And Labour Complete As Per Specifications And Direction Of Engineer-In-Charge. Material Supply Company Shall Be Registered By Bureau Of Indian Standards, Member Of Indian Green Building Council, Iso 9001, Iso 14001 ( Environment Management System ) , National Small Industries Corporation ( Nsic ) , Sme Rating Agency Of Indian Ltd. ( Smera ) , Dun And Bradstreet ( D&B ) . 9.211.1 35 Mm Thick Including 4 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.211.2 30 Mm Thick Including 3 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.212 Providing And Fixing Is Marked Factory Made Veneer High Density Fibre ( Hdf ) Flush Door Shutters Conformity To Is:15380 ( 2003 ) , Eco-Friendly, Termite Resistant Borer Free, Anti Warping Phenol Formaldehyde ( Pf ) , . The Rate Shall Be Inclusive Of All Material And Labour Complete As Per Specifications And Direction Of Engineer-In-Charge. Material Supply Company Shall Be Registered By Bureau Of Indian Standards, Member Of Indian Green Building Council, Iso 9001, Iso 14001 ( Environment Management System ) , National Small Industries Corporation ( Nsic ) , Sme Rating Agency Of Indian Ltd. ( Smera ) , Dun And Bradstreet ( D&B ) . 9.212.1 35 Mm Thick Including 4 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.212.2 32 Mm Thick Including 3 Nos 100 Mm Long Isi Marked Heavy Weight ( 2.5 Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.212.3 25 Mm Thick Isi Marked Heavy Weight Nickel Plated Bright Finished M.S. Piano Hinges With Screws. 9.213 Non Decorative Pine Wood Flush Door:- Providing And Fixing Isi Marked Factory Made Flush Door Shutters Conforming To Is: 2202 ( Part I ) Non Decorative Type, Core Of Block Board Construction With Kiln Seasoned And Chemically Treated 1St Class Pine Wood Battens ( Strips ) And Chemically Treated, Finger Jointed All Material And Labour Complete As Per Specification And Direction Of Engineer- In-Charge. Spacing Of Finger Joints In Wood As Above Shall Not Be Less Than 50 Cm. Each Shutter Shall Be Factory Made To The Exact Opening Size Within Frame Of Doors / Cupboards And Shall Be Stamped By The Manufacturer To Display Name Of Manufacturer, Batch Number Of Product And Conformity With Is:2202 9.213.1 35 Mm Thick Including 4 Nos. 100 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.213.2 30 Mm Thick Including 3 Nos. 100 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.213.3 25Mm Thick ( For Cupboard ) Including 3 Nos. 75 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 9.214 Providing And Fixing Isi Marked Factory Made Flush Door Shutters Conforming To Is: 2202 ( Part I ) Laminated Type, Core Of Block Board Construction With Kiln Seasoned And Chemically Treated 1St Class Pine Wood Battens ( Strips ) And Frame Of Kiln Seasoned Sheet Shall Be As Per Is: 2046 Type S Of Approved Quality. Each Shutter Shall Be Factory Made To The Exact Size ( Opening ) Within Frame Of Doors / Cupboards And Shall Be Stamped By The Manufacturer To Display Name Of Manufacturer, Batch Number Of Product And Conformity With Is:2202. The Rate Shall Be Inclusive Of All Material And Labour Complete And As Per Specification And Direction Of Engineer-In- Charge. 9.214.1 35 Mm Thick Including 4 Nos. 100 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.214.2 30 Mm Thick Including 3 Nos. 100 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.214.3 25Mm Thick ( For Cupboard ) Including 3 Nos. 75 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 9.215 Providing And Fixing Isi Marked Factory Made Flush Door Shutters Conforming To Is: 2202 ( Part I ) Laminated Type, Core Of Block Board Construction With Kiln Seasoned And Chemically Treated 1St Class Pine Wood Battens ( Strips ) And Frame Of Kiln Seasoned Within Frame Of Doors / Cupboards And Shall Be Stamped By The Manufacturer To Display Name Of Manufacturer, Batch Number Of Product And Conformity With Is:2202. The Rate Shall Be Inclusive Of All Material And Labour Complete And As Per Specification And Direction Of Engineer-In-Charge. 9.215.1 35 Mm Thick Including 4 Nos. 100 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.215.2 30 Mm Thick Including 3 Nos. 100 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.215.3 25Mm Thick ( For Cupboard ) Including 3 Nos. 75 Mm Long Isi Marked Heavy Weight ( 2.5Mm Thick ) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 9.216 Providing And Fixing Isi Marked Factory Made Flush Door Shutters Conforming To Is: 2202 ( Part I ) Veneer Decorative Type, Core Of Block Board Construction With Kiln Seasoned And Chemically Treated 1St Class Pine Wood Battens ( Strips ) S And Commercial Grade Face Veneers On Both Outer Faces Of Shutters Including Kiln Seasoned And Chemically Treated, Finger Jointed All Material And Labour Complete As Per Specification And Direction Of Engineer-In- Charge. Spacing Of Finger Joints In Wood As Above Shall Not Be Less Than 50 Cm. Each Shutter Shall Be Factory Made To The Exact Opening Size Within Frame Of Doors / Cupboards And Shall Be Stamped By The Manufacturer To Display Name Of Manufacturer, Batch Number Of Product And Conformity With Is:2202. 9.216.1 35 Mm Thick Including 4 Nos. 100 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.216.2 30 Mm Thick Including 3 Nos. 100 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Stainless Steel Butt Hinges With Necessary Screws. 9.216.3 25Mm Thick ( For Cupboard ) Including 3 Nos. 75 Mm Long, Isi Marked Heavy Weight ( 2.5Mm Thick ) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 9.217 Providing And Fixing Factory Made Solid Foam Upvc Profile For Kitchen Cabinet Frame ( 45 X 20 Mm ) Of Approved Shade, Quality And Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets ( Single Extruded ) Having Density 600 Kg / Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastne With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In-Charge. 9.218 Providing And Fixing Factory Made Kitchen Cabinet Shutter / Partition 20 Mm Nominal Thickness Of Approved Shade, Quality And Make, Made From Rigid Foam Sheets ( Single Extruded ) Having Density 600 Kg / Cum And Laminated On Both Side By Laminate Sheet / Pvc Foil Lamination. The Exposed Edges Shall Be Sealed With Pvc Edge Beading Of Same Shade And Colour. The Shutter Shall Be Fire Retardent Having Necessary Screw Holding Capacity.Shutter Shall Be Fixed To Frame Using Approved Hinges With Necessary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In-Charge. 10.1 Structural Steel Work In Single Section Fixed With Or Without Connecting Plate Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 10.2 Structural Steel Work Using M.S. Flats, Angles, Channels I-Section, H-Section Etc. Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 10.3 Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2mm And Braced With Flat Iron Diagonals 20X5mm Size With Top And Bottom Rail Of T-Iron 40X40x6mm With 40Mm Dia Steel Pulleys Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer. Rate Includes Recess Cutting In Floor And Making Good The Same Wherever Required. 10.4 Providing And Fixing 1Mm Thick M.S. Sheet Sliding-Shutters With Frame And Diagonal Braces Of 40X40x6mm Angle Iron, 3Mm M.S.Gusset Plates At The Junction And Corners 25Mm Dia Pulley, 40X40x6mm Angle And T-Iron Guide At The Top And Bottom Respectively Including Applying A Priming Coat Of Approved Steel Primer. 10.5 Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x5mm Angle Iron And 3Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer. 10.5.1 Using M.S. Angels 40X40x6mm For Diagonal Braces 10.5.2 Using Flats 30X6mm For Diagonal Braces And Central Cross Piece. 10.6 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete Including The Cost Of Providing And Fixing Necessary 27.5Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To I.S. 4454- Part-1 And M.S. Top Cover Of Required Thickness For Rolling Shutters. 10.6.1 80X1.25Mm M.S. Laths With 1.25 Mm Thick Top Cover. 10.6.2 80X1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover. 10.6.3 80X0.90 Mm M.S. Laths With 0.90 Mm Thick Top Cover. 10.7 Extra For Providing Suitable Mechanical Device Chain And Crank Operation For Operating Rolling Shutters. 10.7.1 Exceeding 10.00 Sqm And Upto 16.80 Sqm In The Area. 10.7.2 Exceeding 16.80 Sqm In Area. 10.8 Extra For Providing Grilled Rolling Shutters Manufactured Out Of 8 Mm Dia. M.S. Bar Instead Of Laths As Per Design Approved By Engineer-In-Charge. ( Area Of Grill To Be Measured ) . 10.9 Providing And Fixing Ball Bearing For Rolling Shutters. 10.10 Providing And Fixing Factory Made Isi Marked Glazed Steel Doors, Windows And Ventilators Side / Top / Centre Hung With Beading And Z-Section All Members Such As F7d, F4b, K11 B And K12 B And Other Tubular Section Member Etc. Complete Of Standard Rolled Steel Sections, Joints Mitred And Flash Butt Welded And Sash Bars Tenoned And Riveted, Including Providing And Fixing Of Hinges, Pivots, Including Priming Coat Of Approved Steel Primer, But Excluding The Cost Of Other Fittings, Complete All As Per Approved Design ( Sectional Weight Of Only Steel Members Shall Be Measured For Payment ) . 10.10.1 Fixing With 15X3 Mm Lugs 10 Cm. Long Embedded In Cement Concrete Block 15X10x10 Cm Of Cement Concrete 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) . 10.10.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.10.3 Extra For Providing And Fixing Steel Beading Of Size 10X10x1.6Mm ( Box Type ) Approved Shape And Section With Screws Instead Of Glazing Clips And Metal Sash Putty In Steel Doors, Windows, Ventilators And Composite Units. 10.11 Providing And Fixing L-Iron Or T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel L-Section Or T-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 10.11.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.12 Providing And Fixing Pressed Steel Door Frames Made Of 1.6 Mm Thick Steel Profile Conforming To Is: 4351 Manufactured From Commercial Mild Steel Sheet Including Hinges, Jamb, Lock Jamb, M.S. Pressed Butt Hinges, With Mortar Guards, Lock Strike-Plate And Shock Absorbers As Specified Filling The Frame With Cement Concrete 1:3:6 At Site Before Fixing ( Cost Of Concrete To Be Paid Separately ) Fixing With Adjustable Lugs ( 200 Mm Long & 1.0 Mm Thick ) And Applying A Coat Of Approved Steel Primer After Pre-Treatment Of The Surface As Directed By Engineer-In- Charge: 10.12.1 Profile B Of 1.60Mm Thick Single Rebate Of Size 80Mmx50mm 10.12.1.1 Fixing With Adjustable Lugs With Split End Tail To Each Jamb. 10.12.1.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.12.2 Profile C Of 1.60Mm Thick Single Rebate Of Size 100Mmx50mm 10.12.2.1 Fixing With Adjustable Lugs With Split End Tail To Each Jamb. 10.12.2.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.12.3 Profile E Of 1.60Mm Thick Double Rebate Of Size 115Mmx50mm 10.12.3.1 Fixing With Adjustable Lugs With Split End Tail To Each Jamb. 10.12.3.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.12.4 Profile B Of 1.25Mm Thick Single Rebate Of Size 80Mmx50mm 10.12.4.1 Fixing With Adjustable Lugs With Split End Tail To Each Jamb. 10.12.4.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.12.5 Profile C Of 1.25Mm Thick Single Rebate Of Size 100Mmx50mm 10.12.5.1 Fixing With Adjustable Lugs With Split End Tail To Each Jamb. 10.12.5.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.12.6 Profile E Of 1.25Mm Thick Double Rebate Of Size 115Mmx50mm 10.12.6.1 Fixing With Adjustable Lugs With Split End Tail To Each Jamb. 10.12.6.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.13 Providing And Fixing M.S. Tubular Frames And Shutters Or Frames Only Or Shutters Only For Doors, Windows, Ventilators And Cupboard With Any Sections, Made Of 1.60 Mm Or 1.25 Mm Thick M.S. Sheet, Joints Mitred, Welded And Grinded Finish, With Profiles Of Required Size As Per Drawing, Including Fixing Of Necessary Butt Hinges, Stays And Screws And Applying A Priming Coat Of Approved Steel Primer Excluding Cost Of All Fittings Such As Handles, Tower Bolts, Sliding Door Bolts, Latches Etc. And Panels. 10.13.1 Fixing With 15X3 Mm Lugs 10 Cm. Long Embedded In Cement Concrete Block 15X10x10 Cm Of Cement Concrete 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) . 10.13.2 Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size ( To Be Paid For Separately ) . 10.14 Steel Work In Built Up M.S. Tubular Section ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses / Frame Work Etc. Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. 10.14.1 Hot Finished Welded Type Tubes 10.14.2 Hot Finished Seamless Type Tubes 10.14.3 Electric Resistance Or Induction Butt Welded Tubes. 10.15 Design, Supply, Fabrication, Taransportion And Erection Of Structural Steel / Mild Steel Built-Up Sections For Steel Building In Column, Rafter, Truss, Floor Joist, Wind Bracings, Tie Beam, Foundation Bolts, Fasteners Etc. Including Two Coats Of Epoxy Paint And One Coat Of Primer. These Structural Steel / Built-Up Sections Shall Be Manufactured Using Advanced Cnc Plasma / Oxy Acetylene Cutter And H Beam Welding Line. Welding Shall Be In Full Depth On Both Sides Of The Plate Adopting Relevant I.S Code. 10.16 Providing And Fixing M.S. Fan Clamp Type I Or Ii Of 16 Mm Dia M.S. Bar Bent To Shape With Hooked Ends In R.C.C. Slabs, Beams During Laying Including Painting The Exposed Portion Of Loop, All As Per Standard Design Complete. 10.17 Providing And Fixing Circular / Hexagonal Cast Iron Or M.S. Sheet Box For Ceiling Fan Clamp Of Internal Dia 140Mm, 73Mm Height, Top Lid Of 1.5Mm Thick M.S. Sheet With Its Top Surface Hacked For Proper Bonding, Top Lid Shall Be Screwed Into The Cast Iron / M.S. Sheet Box By Means Of 3.3Mm Dia. Round Headed Screws, One Lock At The Corners. Clamp Shall Be Made Of 16Mm Dia M.S. Bar Bent To Shape As Per Standard Drawing. 10.18 Providing And Fixing Mild Steel Round Holding Down Bolts With Nuts And Washer Plates Complete. 10.19 Providing And Fixing Bolts Including Nuts And Washers Complete. 10.20 Providing And Fixing M.S. Rivets Of Sizes In Position. 10.21 Welding By Gas Or Electric Plant Including Transportation Of Plant At Site Etc. Complete. 10.22 Steel Work Welded In Built Up Sections / Framed Work Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 10.22.1 In Stringers, Treads, Landings Etc. Of Stair Cases Including Use Of Chequered Plate Wherever Required, All Complete. 10.22.2 In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. 10.23 Providing And Fixing Hand Rail Of Approved Size By Welding Etc. To Steel Ladder Railing, Balcony Railing, Staircase Railing And Similar Works, Including Applying A Priming Coat Of Approved Steel Primer. 10.23.1 M.S. Tube. 10.23.2 E.R.W. Tubes. 10.23.3 G.I. Pipes. 10.24 Providing And Fixing Carbon Steel Galvanised ( Minimum Coating 5 Micron ) Dash Fastener Of 10 Mm Dia Double Threaded 6.8 Grade ( Yield Strength 480 N / Mm2 ) , Counter Sunk Head, Comprising Of 10 Mm Dia Polyamide Pa 6 Grade Sleeve, Including Drilling Of Hole In Frame, Concrete / Masonry, Etc. As Per Direction Of Engineer-In-Charge. 10.24.1 10X60 Mm 10.24.2 10X80 Mm 10.24.3 10X120 Mm 10.24.4 10X140 Mm 10.24.5 10X160mm 10.25 Providing And Fixing Stainless Steel ( Grade 304 ) Railing Made Of Hollow Tubes, Channels, Plates Etc. Including Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete I / C Fixing The Railing With Necessary Accessories And Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge. ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc. ) 10.26 Providing And Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows And Doors With M.S. Flat 15X3mm And Nuts And Bolts Complete. 10.26.1 Galvanised M.S. Wire Gauze With 0.63Mm Dia Wire And 1.4 Mm Aperture On Both Sides 10.26.2 Stainless Steel ( Grade 304 ) Wire Gauze Of 0.5 Mm Dia Wire And 1.4 Mm Aperture On Both Sides. 10.27 Providing And Fixing Glass Panes / Steel Sheet / Fibre Sheet With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows All Complete. 10.27.1 With 4.0 Mm Thick Glass Panes 10.27.2 With 5.50 Mm Thick Glass Panes 10.27.3 With 1Mm Thick Mild Steel Sheet I / C 10X10x1.6Mm Box Beading. 10.27.4 With 2Mm Thick Fibre Reinforced Polymer ( Frp ) Sheet I / C 10X10x1.6Mm Box Beading. 10.27.5 With 1Mm Thick Galvanised Steel Sheet I / C 10X10x1.6Mm Box Beading. 10.27.6 With 4Mm Thick Cement Fibre Board Conforming To Is 14862:2000 Of Category Type A Grade I / C 10X10x1.6Mm Box Beading. 10.27.7 With 6Mm Thick Cement Fibre Board Conforming To Is 14862:2000 Of Category Type A Grade I / C 10X10x1.6Mm Box Beading. 10.27.8 With 8Mm Thick Cement Fibre Board Conforming To Is 14862:2000 Of Category Type A Grade I / C 10X10x1.6Mm Box Beading. 10.28 Add Extra For Providing And Fixing Froasted Glass Instead Of Float Glass. 10.28.1 With 4.0 Mm Thick Glass Panes. 10.28.2 With 5.5 Mm Thick Glass Panes. 10.29 Supplying At Site: 10.29.1 R.C.C. Standards Post / Struts / Rails / Poles Of Mix 1:1.5:3 ( 1 Cement : 1.5 Sand : 3 Graded Stone Aggregate 12.5 Mm Nominal Size ) With Wooden Plugs Or 6Mm Bar Nibs Wherever Required As Per Direction Of Engineer-In-Charge Including Fixing ( Cost Of Earth Works In Excavation, Concrete Works In Foundation To Be Paid Separately ) . 10.29.2 Angle Iron Post And Strut Of Required Size Including Bottom To Be Split And Bent At Right Angle In Opposite Direction For 10 Cm Length And Drilling Holes Upto 10 Mm Dia. Etc. Complete. ( Cost Of Earth Work In Excavation And Concrete Work In Foundation To Be Paid Separately ) 10.29.3 Supplying At Site -Welded Steel Wire Fabric Of Required Width Having Rectangular Mesh Painted With Two Or More Coats Of Enamel Paint Of Approved Shade Over A Coat Of Primer ( Priming Painting To Be Paid For Separately ) . 10.30 Supplying And Fixing Turn Buckles And Straining Bolts For Barbed Wire Fencing. ( Labour Rate Only ) . 10.31 Fencing With R.C.C. Post Placed At Required Distance, Embedded In Cement Concrete Blocks, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post One Side Between The Two Posts Fitted And Fixed With G.I. Staples On Wooden Plugs Or G.I. Binding Wire Tied To 6 Mm Bar Nibs Fixed While Casting The Post ( Cost Of R.C.C. Posts, Struts, Earth Work And Concrete To Be Paid For Separately ) With Gi Barbed Wire. 10.32 Fencing With Barbed G.I. Wire Angle Iron Post Placed Fitted To At Required Distance Embedded In Cement Concrete Blocks, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides Between The Two Posts Fitted And Fixed With G.I. Staples, Turn Buckles Etc. Complete. ( Cost Of Posts, Struts, Earth Work And Concrete Work To Be Paid For Separately ) :- Payment To Be Made Per Metre Cost Of Total Length Of Barbed Wire Used. 10.33 Fixing Welded Steel Wire Fabric Fencing With Posts Of Specified Material And Of Standard Design Placed And Embedded In Cement Concrete Blocks 45X45x60cm Of Mix 1:5:10 ( 1Cement :5 Sand :10 Graded Stone Aggregate 40Mm Nominal Size ) Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Struts Embedded In Cement Concrete Blocks 70X45x50cm Of The Same Mix, Provided With Welded Steel Wire Fabric Fixed Between The Posts Fitted And Fixed With G.I. Staples On Wooden Plugs Or Tied To 6 Mm Bar Nibs With G.I. Binding Wire ( Cost Of Posts, Painting, Earth Work In Excavation And Cement Concrete To Be Paid For Separately ) . ( Labour Rate Only ) . 10.34 Providing And Fixing G.I. Or Pvc Coated G.I.Wire Chain Link Fabric Fencing Of Required Width And Mesh Size Including Strengthening With 2Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete With Posts Of Specified Material And Of Standard Design Placed And Embedded In Cement Concrete Blocks 45X45x60cm Of Mix 1:5:10 ( 1Cement :5 Sand :10 Graded Stone Aggregate 40Mm Nominal Size ) Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Struts Embedded In Cement Concrete Blocks 70X45x50cm Of The Same Mix, As Per The Direction Of Engineer- In-Charge. ( Cost Of Post, Painting Earthwork & C.C. To Be Paid Separately ) 10.34.1 Made Of G.I. Wire. 10.34.2 Made Of G.I. Wire, Pvc Coated To Achieve Outer Dia. Not Less Than 5Mm In Required Colour And Shade. 10.35 Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 25X25 Mm Made Of G.I. Wire Of Dia. 3Mm Including Strengthening With 2Mm Dia. Wire Or Nuts, Bolts And Washers As Required Complete, With Posts Of Specified Material And Of Standard Design Placed And Embedded In Cement Concrete Blocks 45X45x60cm Of Mix 1:5:10 ( 1Cement :5 Sand : 10 Graded Stone Aggregate 40Mm Nominal Size ) Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Struts Embedded In Cement Concrete Blocks 70X45x50cm Of The Same Mix, As Per The Direction Of Engineer-In- Charge. ( Cost Of Post Painting Earth Work & C.C. To Be Paid Separately ) 10.36 Providing And Fixing Concertina Coil Fencing With Punched Tape Concertina Coil 600 Mm Dia 10 Metre Openable Length ( Total Length 90 M ) , Having 50 Nos Rounds Per 6 Metre Length, Upto 3 M Height Of Wall With Existing Angle Iron Y Shaped Placed 2.4M Or 3.00M Apart And With 9 Horizontal R.B.T. Reinforced Barbed Wire, Stud Tied With G.I. Staples And G.I. Clips To Retain Horizontal, Including Necessary Bolts Or G.I. Barbed Wire Tied To Angle Iron, All Complete As Per Direction Of Engineer-In Charge, With Reinforced Barbed Tape ( R.B.T. ) / Spring Core ( 2.5 Mm Thick ) Wire Of High Tensile Strength Of 165 Kg / Sq Mm With Tape ( 0.52 Mm Thick ) And Weight 43.478 Gm / Metre ( Cost Of M.S. Angle, C.C. Blocks Shall Be Paid Separately ) . 10.37 Providing & Fixing Of Fire Resistant Flush Door Shutter Made Out Of 0.8 Mm Thick Sheet Steel ( Steel As Per Is 513 ) Duly Powder Coated By Pre Treatment ( Seven Tank Process ) With Coating Of Powder, Minimum Thickness Of 60 Microns As Per Is 13871 And Approved Shade, The Construction Of Door Shutter Consists Of Size 50X10x1.2Mm 6Numbers Shall Be Welded On Inner Side Of Door Frame For The Support Of Anchor Fasteners Fastener. Infill Material In The Hollow Portion Of Door Frame Shall Be Puf / Mineral Wool / Glass Wool / Rock Wool Of Density 48 Kg / M3, The Door Frame Shall Be Manufactured As Per Is 4351-2003, The Door Frame Fixing Shall Be Done By Dry Fixing Method With Anchor Fasteners Of Size M10x60 Mm 6 Numbers, Complete As Per The Direction Of Engineer-In-Charge. 10.38 Providing And Fixing Of Factory Make Air Tight Casement Windows Made Of Roll Formed Galvanized Pre-Painted Steel With Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer 5-7 Microns Thick Or Powder Coated With Pure Polyester Powder Up To 50-60 Microns Including Filling The Gap Upto 5 Mm Depth And 5 Mm Width In Between Steel Frame And Adjacent Rcc / Brick / Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete. 10.38.1 Openable Window 10.38.2 Fixed Windows 10.39 Providing And Fixing Of Factory Make Single Rebate Openable / Fixed Windows Made Of Roll Formed Galvanized Pre- Pained Steel With Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer 5-7 Microns Thick ) Heavy Duty Pivot Hinges Per Shutter And Window Fitted Without Glazing Including 10Mm Square Bars Welded To 6X12mm Flat At A Distance 150Mm C / C ( Pitch ) Etc. Including Filling The Gap Upto 5 Mm Depth And 5 Mm Width In Between Steel Frame And Adjacent Rcc / Brick / Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In- Charge Complete. 10.39.1 Openable Single Rebate Window 10.39.2 Fixed Single Rebate Window 10.40 Providing And Fixing Of Factory Make Double Rebate Windows Made Of Roll Formed Galvanized Pre-Painted Steel With Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer 5-7 Microns Thick Or Powder Coated With Pure Polyester Powder Up To 50-60 Microns Thick, Fitted Using Epdm ( Ethyl Propylene Diamine Monomer ) Gaskets Including Fixing Windows In The Concrete / Masonry Wall By Means Of Self- Expanding Screws, Including 10Mm Square Bars Welded To 6X12mm Flat At A Distance 150Mm C / C ( Pitch ) Etc. Including Filling The Gap Upto 5 Mm Depth And 5 Mm Width In Between Steel Frame And Adjacent Rcc / Brick / Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In- Charge Complete.. 10.40.1 Openable Double Rebate Window 10.40.2 Fixed Double Rebate Window 10.41 Providing And Fixing Of Factory Make Fixed Louvers Fabricated From Roll Formed Sections Made Of Galvanized Pre-Painted Steel With Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer 5-7 Microns Thick Or Powder Coated With Pure Polyester Powder Up To 50-60 Microns Thick, Colour Coated / Powder Coated Including Filling The Gap Upto 5 Mm Depth And 5 Mm Width In Between Steel Frame And Adjacent Rcc / Brick / Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In- Charge Complete. ( Glazing Shall Be Paid Separately As Per Sor Rate ) 10.42 Providing And Fixing Of Factory Make Pre Painted Steel Sliding Window 2 Track-2 Panel Sliding Window Fabricated From Roll Formed Sections Made Of Galvanized Steel With Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer 5-7 Microns Thick Or Powder Coated With Pure Polyester Powder Up To 50-60 Microns The Above Frames Should Be Fixed To The Concrete / Masonry Walls By Means Of Self-Expanding Screws. Including Filling The Gap Upto 5 Mm Depth And 5 Mm Width In Between Steel Frame And Adjacent Rcc / Brick / Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete. 10.43 Providing And Fixing Pre Painted Steel Sliding Window 3 Fabricated From Roll Formed Sections Made Of Galvanized Steel With Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer 5-7 Microns Thick Or Powder Coated With Pure Polyester Powder Up To 50-60 Microns The Above Frames Should Be Fixed To The Concrete / Masonry Walls By Means Of Self-Expanding Screws. Including Filling The Gap Upto 5 Mm Depth And 5 Mm Width In Between Steel Frame And Adjacent Rcc / Brick / Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete. 11.1 40 Mm Thick Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate ) 20Mm Nominal Size Stone Aggregate In Panels Finished With A Floating Coat Of Neat Cement Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. ( Area Of Panel Not To Exceed 2.0 Sqm ) 11.2 52 Mm Thick Cement Concrete Flooring With Concrete Hardener Topping, Under Layer 40 Mm Thick Cement Concrete 1:2:4 ( 1 Cement: 2 Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Top Layer 12 Mm Thick Cement Hardener Consisting Of Mix 1:2 ( 1 Cement Hardener Mix: 2 Graded Stone Aggregate 6 Mm Nominal Size ) By Volume, Hardening Compound Mixed @ 2 Litre Per 50Kg Of Cement Or As Per Manufacturers Specifications. This Includes Cost Of Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 11.3 62 Mm Thick Cement Concrete Flooring With Concrete Hardener Topping, Under Layer 50 Mm Thick Cement Concrete 1:2:4 ( 1 Cement: 2 Sand: 4 Graded Stone Aggregate 20Mm Nominal Size ) And Top Layer 12Mm Thick Cement Hardener Consisting Of Mix 1:2 ( 1 Cement Hardener Mix: 2 Graded Stone Aggregate, 6Mm Nominal Size ) By Volume, Hardening Compound Mixed @ 2 Litre Per 50Kg Of Cement Or As Per Manufactures Specifications. This Includes Cost Of Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 11.4 Cement Plaster Skirting 18 Mm Thick ( Upto 30 Cm Height ) With Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Finished With A Floating Coat Of Neat Cement. 11.5 Cement Concrete Pavement With Cement Concrete 1:2:4 ( 1 Cement: 2 Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size ) Including Finishing Complete. 11.6 Making Chequers Of Approved Pattern On Cement Concrete Floors, Steps, Landing, Pavements Etc. 11.7 40 Mm Thick Marble Chips Flooring Rubbed And Polished To Granolithic Finish, Under Layer 34 Mm Thick Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 12.5Mm Nominal Size ) And Top Layer 6Mm Thick With White, Black, Chocolate, Grey, Yellow Or Green Marble Chips Of Sizes From 1Mm To 4Mm Nominal Size Laid In Cement Marble Powder Mix 3:1 ( 3 Cement : 1 Marble Powder ) By Weight In Proportion Of 4:7 ( 4 Cement Marble Powder Mix : 7 Marble Chips ) By Volume Including Cement Slurry Etc. Complete : ( Area Of Panel Not To Exceed 2.0 Sqm ) 11.7.1 Dark Shade Pigment With Ordinary Cement. 11.7.2 Light Shade Pigment With White Cement. 11.7.3 Medium Shade Pigment With 50% White Cement And 50% Ordinary Cement. 11.7.4 White Cement Without Any Pigment. 11.7.5 Light Shade Pigment With Ordinary Cement. 11.7.6 Ordinary Cement Without Any Pigment. 11.8 40 Mm Thick Marble Chips Flooring, Rubbed And Polished To Granolithic Finish, Under Layer 31Mm Thick Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 12.5Mm Nominal Size ) And Top Layer 9Mm Thick With White, Black, Chocolate, Grey, Yellow Or Green Marble Chips Of Sizes From 4Mm To 7Mm Nominal Size Laid In Cement Marble Powder Mix 3:1 ( 3 Cement : 1 Marble Powder ) By Weight In Proportion Of 4:7 ( 4 Cement Marble Powder : 7 Marble Chips ) By Volume Including Cement Slurry Etc. Complete. ( Area Of Panel Not To Exceed 2.0 Sqm ) 11.8.1 Dark Shade Pigment With Ordinary Cement. 11.8.2 Light Shade Pigment With White Cement. 11.8.3 Medium Shade Pigment With 50% White Cement And 50% Ordinary Cement. 11.8.4 White Cement Without Any Pigment. 11.8.5 Light Shade Pigment With Ordinary Cement. 11.8.6 Ordinary Cement Without Any Pigment. 11.9 40 Mm Thick Marble Chips Flooring, Rubbed And Polished To Granolithic Finish, Under Layer 28 Mm Thick Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 12.5Mm Nominal Size ) And Top Layer 12Mm Thick With White, Black, Chocolate, Grey Yellow Or Green Marble Chips Of Sizes From 7Mm To 10Mm Nominal Size Laid In Cement Marble Powder Mix 3:1 ( 3 Cement : 1 Marble Powder ) By Weight In Proportion Of 2:3 ( 2 Cement Marble Powder Mix : 3 Marble Chips ) By Volume Including Cement Slurry Etc. Complete : ( Area Of Panel Not To Exceed 2.0 Sqm ) 11.9.1 Dark Shade Pigment With Ordinary Cement. 11.9.2 Light Shade Pigment With White Cement. 11.9.3 Medium Shade Pigment With 50% White Cement And 50% Ordinary Cement. 11.9.4 White Cement Without Any Pigment. 11.9.5 Light Shade Pigment With Ordinary Cement. 11.9.6 Ordinary Cement Without Any Pigment. 11.10 Marble Chips Skirting ( Upto 30 Cm Height ) 18 Mm Thick With Under Layer 12 Mm Thick In Cement Plaster 1:3 ( 1 Cement : 3 Sand ) : Rubbed And Polished To Granolithic Finish, Top Layer 6 Mm Thick With White, Black, Chocolate, Grey, Yellow Or Green Marble Chips Of Sizes From Smallest To 4 Mm Nominal Size Laid In Cement Marble Powder Mix 3:1 ( 3 Cement : 1 Marble Powder ) By Weight In Proportion Of 4:7 ( 4 Cement Marble Powder Mix :7 Marble Chips ) By Volume : 11.10.1 Dark Shade Pigment With Ordinary Cement. 11.10.2 Light Shade Pigment With White Cement. 11.10.3 Medium Shade Pigment With 50% White Cement And 50% Ordinary Cement. 11.10.4 White Cement Without Any Pigment. 11.10.5 Light Shade Pigment With Ordinary Cement. 11.10.6 Ordinary Cement Without Any Pigment. 11.11 Extra For Laying Terrazo Flooring On Staircase Treads Not Exceeding 30 Cm In Width Including Cost Of Forming, Nosing Etc. 11.12 Providing And Fixing Glass Strips 40 Mm Wide And 4 Mm Thick In Joints Of Terrazo / Cement Concrete Floors. 11.13 18 Mm Thick Crazy Marble Stone White, Black Or As Specified Marble Stone Flooring, Including Filling The Gaps With Light Shade Pigment With White Cement Marble Powder Mixture ( 3 Parts Of White Cement : 1 Part Of Marble Powder ) By Weight In Proportion Of 4:7 ( 4 Cement Marble Powder Mix : 7 White, Black Or White And Black Marble Chips Of Sizes From 1Mm To 4Mm Nominal Size By Volume ) , With Under Layer 25Mm Thick Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size ) , Including Rubbing, Polishing And Cement Slurry Etc.Complete . 11.14 Precast Terrazo Tiles 22Mm Thick With Graded Marble Chips Of Size Upto12mm, Laid In Floors, And Landings, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles Including Rubbing And Polishing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement :4 Sand ) : 11.14.1 Light Shade Using White Cement. 11.14.2 Medium Shade Using 50%White Cement And 50% Ordinary Cement. 11.14.3 Dark Shade Using Ordinary Cement. 11.14.4 Ordinary Cement Without Any Pigment. 11.15 Extra If Terrazo Tiles Are Laid In Treads Of Steps Not Exceeding 30 Cm In Width. 11.16 Precast Terrazo Tiles 22 Mm Thick With Graded Marble Chips Of Sizes Upto 12 Mm In Skirting And Risers Of Steps Not Exceeding 30 Cm In Height On 12 Mm Thick Cement Plaster 1:3 ( 1 Cement : 3 Sand ) Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Rubbing And Polishing Complete With Tiles Of : 11.16.1 Light Shade Pigment Using White Cement. 11.16.2 Medium Shades Pigment Using 50% White Cement And 50% Ordinary Cement. 11.16.3 Dark Shade Pigment Using Ordinary Cement. 11.16.4 Ordinary Cement Without Any Pigment. 11.17 Chequeredterrazo Tiles 22 Mm Thick With Graded Marble Chips Of Size Up To 6 Mm In Floors Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles Including Rubbing And Polishing Complete On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement :4 Sand ) : 11.17.1 Light Shade Pigment Using White Cement. 11.17.2 Medium Shade Pigment Using 50% White Cement, 50% Ordinary Cement. 11.17.3 Dark Shade Pigment Using Ordinary Cement. 11.17.4 Ordinary Cement Without Any Pigment. 11.18 Chequered Precast Cement Concrete Tiles Any Finish, Any Size 22 Mm Thick Is:13810-1993 Isi Mark In Footpath And Courtyard Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, 15Mm Thick Screed Bad In Cement Mortar 1:6 Complete All As Specified And Directed By Engineer-In-Charge. 11.18.1 Light Shade Pigment Using White Cement. 11.18.2 Medium Shade Pigment Using 50% White Cement 50% Grey Cement. 11.18.3 Dark Shade Pigment Using Ordinary Cement. 11.18.4 Ordinary Cement Without Any Pigment. 11.19 Marble Stone Flooring With 18 Mm Thick Marble Stone ( Sample Of Marble Shall Be Approved By Engineer-In-Charge ) Laid Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Sandand Grey Cement Slurry, Joints Treated With White Cement Mixed With Pigment To Match Colour Of Stone Including Rubbing And Polishing Complete With : ( Area Of Slabs Over 0.5 Sqm ) 11.19.1 Makrana White Second Quality. 11.19.2 Raj Nagar Plain. 11.19.3 Agaria White / Morgarh 11.19.4 Katni Marble 11.19.5 Black Zebra. 11.19.6 Udaipur / Baroda Green Marble 11.19.7 Pink Plain Marble. 11.19.8 Jaisalmer Yellow 11.20 Marble Stone 18 Mm Thick In Riser Of Step, Skirting, Dado And Pillar Laid On 12 Mm Average Thick Cement Mortar 1:3 ( 1 Cement: 3 Sand And Laid With White Cement Slurry ) Joints Treated With White Cement Mixed With Pigment To Match The Shade Of The Slab I / C Rubbing And Polishing Complete. ( Area Of Slab Over0.50Sqm. ) 11.20.1 Makrana White Second Quality. 11.20.2 Raj Nagar Plain. 11.20.3 Agaria White / Morgarh 11.20.4 Katni Marble 11.20.5 Black Zebra. 11.20.6 Udaipur / Baroda Green Marble 11.20.7 Pink Plain Marble. 11.20.8 Jaisalmer Yellow 11.21 Marble Work Gang Saw Cut ( Polished And Machine Cut ) Of Thickness 18 Mm For Wall Lining ( Veneer Work ) , Backing Filled With A Grout Of Average 12 Mm Thick In Cement Mortar 1:3 ( 1 Cement: 3 Sand ) , Including Pointing With White Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With An Admixture Of Pigment To Match The Marble Shade ( To Be Secured To The Backing By Means Of Cramps, Which Shall Be Paid For Separately ) . ( Area Of Slabs Over 0.50 Sqm. ) 11.21.1 Makrana White Second Quality. 11.21.2 Raj Nagar Plain. 11.21.3 Agaria White / Morgarh 11.21.4 Katni Marble 11.21.5 Black Zebra. 11.21.6 Udaipur / Baroda Green Marble 11.21.7 Pink Plain Marble. 11.21.8 Jaisalmer Yellow 11.22 Providing And Fixing 18Mm Thick Gang Saw Cut Mirror Polished ( Premoulded And Prepolished ) Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills , Facias And Similar Locations Of Required Size Of Approved Shade, Colour And Texture Laid Over 20Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Sand ) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing Moulding And Polishing To Edge To Give High Gloss Finish Wherever Required Etc. Complete At All Levels. Samples Approved By Engineer-In- Charge. 11.22.1 Raj Nagar Plain / White Marble / Udaipur Green Marble / Zebra Black 11.22.2.1 Granite Fine Grained Dark Crystal Of Other Colours And Various Patterns 11.22.2.2 Granite Coarse Grained Light Black / Light Red / White With Crystal Of Other Colours And Various Patterns 11.22.2.3 Granite Grey / Pink / Brown With Various Patterns 11.22.3 Cuddpah Stone 11.23 Extra For Prefinished Nosing To Treads Of Steps Of Marble Stone. 11.24 Extra For Marble Stone Flooring In Treads Of Steps And Risers Using Single Length Upto 2.00 Metre. 11.25 Extra For Prefinished Grooves To Treads Of Steps Of Granite Stone 11.26 Providing And Laying Machine Cut, Mirror Polished, Italian Marble Stone ( 18 Mm Thick Italian Marble Stone Slab, Perlato, Rosso Erona, Fire Red Or Dark Emperadore Etc. ) Work In Flooring Laid Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement: 4 Sand ) Laid And Jointed With White Cement Slurry @ 4.4 Kg / Sqm Including Pointing With White Cement Slurry Mixed With Pigment To Match The Marble Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. 11.27 Providing And Fixing Machine Cut, Mirror / Eggshell Polished , Marble Stone Work 18 Mm Thick Italian Marble Stone Slab, Perlato, Rosso Verona, Fire Red Or Dark Emperadore Etc. For Wall Lining ( Veneer Work ) Including Dado, Skirting, Risers Of Steps Etc. Thick Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Laid And Jointed With White Cement Slurry @ 3.3 Kg / Sqm Including Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing, Polishing Etc. All Complete As Per Architectural Drawings, And As Directed By The Engineer-In-Charge. 11.28 Providing And Laying Machine Cut, Mirror Polished Italian Marble Stone 18 Mm Thick Italian Marble Stone Slab, Perlato, Rosso Verona, Fire Red Or Dark Emperadoreetc Flooring, In Required Design ( Simple Geometrical, Abstract Etc. ) And In Patterns In Combination With Italian Marble Stones Of Different Colours, Shades And Finished Surface Texture Etc., In Linear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Laid Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Laid And Jointed With White Cement Slurry @ 4.4 Kg / Sqm Including Pointing With White Cement Slurry Admixed With Pigment To Match The Marble Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. 11.29 Granite Work Gang Saw Cut ( Polished And Machine Cut ) Of Thickness 18Mm For Wall Lining ( Veneer Work ) , Backing Filled With A Grout Of Average 12 Mm Thick In Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Including Pointing With White Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With An Admixture Of Pigment To Match The Marble Shade: ( To Be Secured To The Backing By Means Of Cramps, Which Shall Be Paid For Separately ) . 111.29.1 Area Of Slab Over 0.50 Sqm 11.29.1.1 Fine Grained Granite Dark Black / Dark Red / White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.29.1.2 Coarse Grained Granite Light Black / Light Red / Off White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.29.1.3 Gray / Pink / Brown Or Equivalent With Various Patterns 11.29.2 Area Of Slab Upto 0.50 Sqm 11.29.2.1 Fine Grained Granite Dark Black / Dark Red / White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.29.2.2 Coarse Grained Granite Dark Black / Dark Red / White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.29.2.3 Gray / Pink / Brown Or Equivalent With Various Patterns 11.30 Providing And Laying Gang Saw Cut 18 Mm Thick, Mirror Polished Premoulded ( Wherever Required ) And Pre Polished Machine Cut Granite Stonework In Flooring Of Required Size Shape Of Approved Shade, Color And Texture In Flooring Laid Over 20 Mm Thick Base Of Cement Mortar 1:4 ( 1 Cement: 4 Sand ) Including Grouting The Joints With White Cement Mixed With Matching Pigments Epoxy Touch Ups Etc. Complete As Per Direction Of Engineer-In-Charge. 11.30.1 Area Of Slab Over 0.50 Sqm 11.30.1.1 Fine Grained Granite Dark Black / Dark Red / White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.30.1.2 Coarse Grained Granite Light Black / Light Red / Off White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.30.1.3 Gray / Pink / Brown Or Equivalent With Various Patterns 11.90.2 Area Of Slab Upto 0.50 Sqm 11.30.2.1 Fine Grained Granite Dark Black / Dark Red / White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.30.2.2 Coarsegrained Granite Dark Black / Dark Red / White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.30.2.3 Gray / Pink / Brown Or Equivalent With Various Patterns 11.31 Providing And Laying Gang Saw Cut 30 Mm Thick, Mirror Polished Pre Moulded And Pre Polished Machine Cut Granite Stone Of Required Size And Shape Of Approved Shade, Colour And Texture In Footpath, Flooring In Road Side Plazas And Similar Locations, Laid Over 20Mm Thick Base Of Cement Mortar 1:4 ( 1Cement: 4 Sand ) Including Grouting The Joints With White Cement Mixed With Matching Pigment, Epoxy Touch Ups Etc. Complete As Per Direction Of Engineer-In-Charge. ( Area Of Slab More Than 0.50 Sqm ) 11.31.1 Fine Grained Granite Dark Black / Dark Red / White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.31.2 Coarse Grained Granite Light Black / Light Red / Off White Or Equivalent With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11.31.3 Gray / Pink / Brown Or Equivalent With Various Patterns 11.32 Deduct For Not Polishing Granite Flooring ( Item No 11.29 & 11.30 ) 11.33 Providing And Laying Granite Stone Flooring In Required Design And Patterns In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing And As Directed By The Engineer-In-Charge Granite Stone Slab Dark Black. Dark Red, White Or Equivalent, 11.33.1 Flamed Finish Polish 11.33.2 Leather Finish Polish 11.34 Granite Stone Work 18Mm Thick Of Any Colour In Riser Of Steps, Skirting, Dado And Pillars Laid On 12 Mm Average Thick Cement Mortar 1:3 ( 1 Cement:3 Sand ) And Jointed With White Cement Slurry Mixed With Pigment To Match The Shade Of Slab. 11.35 Providing And Fixing 10X10x7.50 Cm Granite Stone Block Hand Cut Andchisel Dressed On Top, For Paving In Floors, Drains Etc. Laid Over 20Mm Thick Base Mortar 1:4 ( 1Cement:4 Sand ) With Joints 10Mm Wide Filled With Same Mortar Mixed With Matching Pigment Including Ruled Pointing Etc. Complete As Per Direction Of Engineer-In Charge. 11.36 Kota Stone Slab Flooring Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Sand ) 25 Mm Thick. ( Area Of Slab To Be Over 0.25 Sqm ) 11.37 Deduction For Using 20 Mm Thick Slab Instead Of 25 Mm Thick Slab Of Kota Stone In Item No 11.35 11.38 Kota Stone Slabs In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm ( Average ) Thick Cement Mortar 1:3 ( 1 Cement 3 Coarse Sand ) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. 11.38.1 10-12 Mm Thick 11.38.2 20 Mm Thick 11.39 Kota Stone Slab ( Area Less Than 0.5 Sqm ) Rough Chiseled Dressed Average 40 Mm Thick Flooring For Parking And Open Area Of Thickness Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Complete With Base Of Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 11.40 Providing Edge Moulding To 18Mm Thick Marble Stone Counters, Vanities, Window Sills Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. 11.40.1 Marble Work 11.40.2 Granite Work. 11.41 Extra For Fixing Marble / Granite Stone Over And Above Corresponding Basic Item, In Facia And Drops Of Width Upto 150 Mm With Epoxy Resin Based Adhesive Including Cleaning Etc. Complete. 11.42 Extra For Providing Opening Of Required Size And Shape For Wash Basins / Kitchen Sink In Kitchen Platform, Vanity Counters And Similar Location In Marble / Granite / Stone Work Including Necessary Holes For Pillar Taps Etc. Including Moulding, Rubbing And Polishing Of Cut Edges Etc. Complete. 11.43 Mirror Polishing On Marble Work / Granite Work / Stone Work Wherever Required To Give High Gloss Finish Complete. 11.44 Fine Dressed Stone Flooring Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:5 ( 1Cement : 5 Sand ) With Joints Finished Flush. 11.44.1 Red Sand Stone 11.44.2 White Sand Stone 11.44.3 Grey Lime Stone 11.44.4 Kota Stone 11.45 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:5 ( 1 Cement : 5 Sand ) Including Pointing With Cement Mortar 1:2 ( 1 Cement : 2 Sand ) With An Admixture Of Pigment To Match The Shade Of Stone. 11.45.1 Red Sand Stone 11.45.2 White Sand Stone 11.46 40 Mm Thick Machine Rubbed Stone Flooring Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:5 ( 1 Cement :5 Sand ) With Joints 3Mm Thick, Side Buttered With Cement Mortar 1:2 ( 1 Cement : 2 Sand ) Mixed With Pigment To Match The Shade Of Stone And Pointing With Same Mortar 11.46.1 Red Sand Stone 11.46.2 White Sand Stone 11.47 Extra For Pre Finished Nosing In Treads Of Steps Of Kota Stone / Sand Stone Slab. 11.48 Extra For Kota Stone / Sand Stone In Treads Of Steps And Risers Using Single Length Upto 1.05 Metre. 11.49 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm Or More ( Having Thickness 6 To 7Mm ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Any Colours And Shade Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 11.50 Providing And Fixing Ceramic Glazed Wall Tiles 300X450 Mm Or More ( Having Thickness 6 To 7 Mm ) Of 1St Quality Conforming To Is: 15622 Of Approved Make In All Colours& Shades, Except Burgundy, Bottle Green, Black Laid On 12Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Preprad Same Day When Mortar Is Still Green Jointed With Grey Cement Slurry @3.3 Kg Per Sqm Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. 11.51 Providing And Laying Rectified Glazed Ceramic Floor Tiles 300X300 Mm Or More ( Having Thickness 9 To 10Mm ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In All Colours White, Ivory, Grey, Fume Red Brown Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 11.52 Providing And Laying Rectified Glazed Ceramic Wall Tiles 300X450 Mm Or More ( Thickness To Be Specified By The Manufacturer ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In All Colours White, Ivory, Grey, Fume Red Brown Laid On 12 Mm Thick Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 11.53 Providing And Laying Antiskid Floor Tiles Of Any Sizes, 12 Mm Thickness With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including Grouting The Joints With White Cement With Matching Pigments Etc., Complete. 11.54 Deduct For Not Grouting The Joints With White Cement And Matching Pigment In The Items Of Fixing Of Vitrified Tiles. 11.55 Deduct For Not Using 20Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Sand ) Bedding In Laying Of Floor Tiles. 11.56 Fixing Glazed / Ceramic / Rectified / Vitrified Floor Tiles With Cement Based High Polymer Modified Quick-Set Tile Adhesive ( Water Based ) Conforming To Is: 15477, In Average 3Mm Thickness. 11.57 Providing And Laying Tactile Tile ( For Vision Impaired Persons As Per Standards ) Of Size 300X300x9.8Mm Having Water Absorption Less Than 0.05% And Conforming To Is: 15622 Of Approved Make In All Colours And Shades For Outdoor Floors Such As Footpath, Court Yard, Multi Modals Location Etc., Laid On 20Mm Thick Base Of Cement Mortar 1:4 ( 1Cement : 4 Sand ) In All Shapes And Patterns Including Grouting The Joints With White Cement Mixed With Matching Pigments Etc. Complete As Per Direction Of Engineer-In-Charge. 11.58 Providing And Fixing Glass Mosaic Tiles At Finished Plain Wall Surface Of Size 20 Mm X 20 Mm X 4 Mm In All Colour, Design, Fixing In Customize Design As Per Direction Of Engineer-In- Charge. The Glass Mosaic Tiles To Be Fixed On The Wall Surface With The Help Of Approved Adhesive Applied At The Rate Of 2.5 Kg Per Sqm And Grouting Of The Same. The Rate Is Inclusive Of All Operation, Material And Required Pattern Approved By Engineer-In-Charge: 11.59 Providing And Laying 500X500x40mm Thick Turf Paver On 150Mm Thick Sub Grade Of Compacted Bed Of 20Mm Nominal Size Stone Aggregate And Base Course With 50Mm Thick Sand And Filling Joints With Sand Including Spreading, Well Ramming, Consolidating And Finishing Smooth Etc. All Complete As Per Direction Of Engineer- In-Charge. 11.60 Providing And Fixing 10Mm Thick Acid And / Or Alkali Resistant Tiles Of Approved Make And Colour Using Acid And / Or Alkali Resisting Mortar Bedding And Joints Filled With Acid And / Or Alkali Resisting Cement As Per Is : 4457 Complete As Per The Direction Of Engineer-In- Charge. 11.60.1 In Flooring On A Bed Of 10 Mm Thick Mortar 1:4 ( 1 Acid Proof Cement: 4 Sand ) Acid And Alkali Resistant Tile. 11.60.2 In Dado / Skirting On 12 Mm Thick Mortar 1:4 ( 1 Acid Proof Cement: 4 Sand ) .Acid And Alkali Resistant Tile. 11.61 8 Mm Thick.Stones Tile Work In Skirting, Risers Of Steps And Dado ( Upto 2 M Height ) Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement :3 Sand ) And Jointed With Grey Cement Slurry @ 3.3 Kg / Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 11.61.1 Marble Tiles ( Polished ) Raj Nagar. 11.61.2 Granite Tile Of Any Colour / Shade 11.62 Providing And Fixing Cramps Of Required Size And Shape In Rcc / Cc / Stone / Brick Masonry Backing With Cement Mortar 1:2 ( 1 Cement :2 Sand ) Including Drilling Necessary Hole In Stones And Embedding The Cramp In The Hole ( Fastener To Be Paid Separately ) . 11.62.1 Gunmetal Cramps. 11.62.2 Stainless Steel Cramps. 11.63 Providing And Fixing Expansion Hold Fasteners Of Wedge Expansion Type On C.C. / R.C.C. / Brick Masonry Surface Backing Including Drilling Necessary Holes And The Cost Of Bolt Etc Complete. 11.63.1 Fastener With Threaded Dia 6 Mm. 11.63.2 Fastener With Threaded Dia 10 Mm. 11.63.3 Fastener With Threaded Dia 12 Mm. 11.64 Providing And Fixing Stone Slab Table Rubbed On Both Faces Edges Rounded And Polished Of Size As Required And 1.8 Cm Thick Fixed In Urinal Partitions By Cutting A Chase Of Appropriate Width With Chase Cutter And Embedding The Stone In The Chase With Epoxy Grout Or With Cement Concrete 1:2:4 ( 1 Cement: 2 Sand: 4 Graded Stone Aggregate 6 Mm Nominal Size ) As Per Direction Of Engineer-In- Charge And Finished Smooth. 11.64.1 White Agaria Marble Stone. 11.64.2 Granite Stone Of Approved Shade. 11.65 Providing And Fixing Removable Raised / False Access Flooring With System And Its Components Of Approved Make For Different Plenum Height With Possible Height Adjustment Upto 50 Mm, Comprising Of Modular Load Bearing Floor Panels Supported On G.I. Rectangular Stinger Frame Work And And Surface Flatness Within 0.75Mm.The Panel Is To Withstand A Concentrated Load Of 363 Kgs Applied On Area 25Mm X 25Mm Without Collapse In The Centre Of The Panel Which Is Placed On Four Steel Blocks. The Panel Will Withstand And Uniformly Distributed Load ( Udl ) Minimum 1250 Kg / Sqm And An Impact Load Of 50Kg All Complete As Per The Approved Manufacturers Specification And As Per The Direction Of Engineer- In-Charge. All Specification Must Be Printed On The Side Of The Panel To Ensure The Quality Of The Product. 11.65.1 300 Mm Finished Floor Height ( Ffh ) 11.65.2 450 Mm Finished Floor Height ( Ffh ) . 11.66 Providing And Laying Factory Made Machine Pressed Precast Cement Concrete Interlocking Paver Block Of Any Shape And Size Conforming To Is:15658- 2006 And Isi Marked Of 60 Mm Thickness, M-30 Grade With Grey Cement And Pigment All As Specified. Made By Block Making Machine With Strong Vibratory Compaction, Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Stone Dust, Filling The Joints With Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. 11.67 Providing Epoxy Flooring Self Leveling Type On Strong Base In Desired Colour / Design As Approved By Engineer-In-Charge. Resin For Epoxy Is To Be Of Floor Grade Type I / C Appropriate Hardner And Filler Material. With 5 Year Defect Liability Period ( This Item Is To Be Used Only For Operation Theaters In Hospitals ) 11.67.1 1 Mm Thick 11.67.2 2 Mm Thick 11.67.3 3 Mm Thick 11.68 Providing And Fixing Acoustic Pvc ( Poly Vinyl Flooring ) En ( European Standard ) Over Fiberglass Mat Pvc Foam Backing ( En 14904 ) , Total Thickness Is 3.25Mm ( En 428 / En 427 ) , Wear Layer Is 0.85 Mm Thick ( En 429 ) , Anti-Bacterial And Anti-Fungus Surface Treatment , Chemical Resistance Test Qualified ( En-423 ) -High Resistance, Thermal And Underfloor Heating Test Qualified ( En12524 ) - All Vinyl Sheets Must Be Linked Crosswise With A Continuous Copper Strip And Finally Connected To Earth For Grounding Electrostatic Electrical Charges. Suitable And Slip Resistant. Recommended To Use In Area Like Lecturer Room, Conference Room, Kids Area, School, Colleges, Residential And All Commercial Official Scope Etc. 11.69 Providing And Fixing 2 Mm Thick Heterogeneous Pvc ( Poly Vinyl Flooring ) En ( European Standard ) With Wear Layer Is 0.55Mm Thick Of Pvc, Total Weight Is 2300 G / M2 Approx. Pur ( Polyurethane Reinforced ) , Residual Indentation Approx.0.05 Mm, Castor Wheel Test Qualified, Dimensional Stability ≤0.10%, Static Electrical Charge .The Floor Finish Should Termite Free At The Room Perimeter Passing Over A Concealed Cove Forming And Continuing Up On The Wall Upto100mm. Recommended To Use In Area Like Patient Rooms , Doctor Room Lecturer Room, Kids Area, School, Colleges, Residential And All Commercial Official Scope Etc. 11.70 Providing And Fixing 8Mm And Above Thick Laminated ( Wooden Flooring ) Of Ac4 And Above Grade Product Of Approved Made Out Of Core High Density Fibre Board ( Hdf ) , Surface Layer Shall Be High Preasure Laminated Treated For Abrasion, Scratch, Moisture Protection, Flame Protection U.V Resistant, Layer Of Acrylic Resin, Aluminium Oxide Or Similer Layer Having Above Properties, Backing Under Layer On Min 2 Mm Thickness Shall Provide As Sound Absorbent And Moisture Protection Layer, The Seamless Impregenated Decorative Layer Of Specified Size, Design, Colour And Pettern, All Bonded Together Under High Temperature And Pressure With Eco-Friendly. The Material Shall Be Applicable Warranty Formaldehyde Free, Eco- Friendly And Fully Recyclable ( Eco-Freindly ) And Matching Shed And Excluding Quantity Of Skirting And Profile. 11.71 Brick On Edge Flooring With Bricks Of Class Designation 7.5 On A Bed Of 12 Mm Cement Mortar, 1:6 ( 1 Cement : 6 Sand ) Including Filling The Joints With Same Mortar, With Common Burntclay Non Modular Bricks 11.71.1 100 Mm Thick 11.71.2 200Mm Thick 11.72 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks Of Required Colour Strength, Thickness Pattern, Surface Texture ( Smooth / Rough ) And Size / Shape, Conforming To 15658-2006 Is Marked Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour And Pattern Over 0.30 Mm With Courtyards, Porch With M 15 Cement Concrete In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc. Complete As Per Manufacturers Specifications And Direction Of Engineer-In-Charge. 11.72.1 80 Mm Thick C.C. Paver Block Of M-35 Grade 11.72.2 60 Mm Thick C.C. Paver Block Of M-35 Grade 11.72.3 60 Mm Thick C.C. Paver Block Of M-30 Grade 11.73 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 ( 1 Cement: 3 Sand ) , Including Making Joints With Or Without Grooves ( Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5Mm ) , Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineer-In-Charge ( Length Of Finished Kerb Edging Shall Be Measured For Payment ) . ( Precast C.C. Kerb Stone Shall Be Approved By Engineer-In- Charge ) . 11.74 Providing And Fixing At Or Near Ground Level Factory Made Rcc Pavement Slab Of M-30 Grade Of Size 450X450x50 Mm, Including Reinforcement With 6 Mm Dia M.S. Bars 4 Nos On Each Side ( Top & Bottom ) , Including Setting In Position In Footpath To The Required Level And Line Over A Bed Of 20 Mm Average Thick Cement Mortar 1:5 ( 1 Cement : 5 Sand ) , Having Joint Thickness Not More Than 5Mm Except On Curve, Including Filling Of Joints With Same Cement Mortar And Making Grooves Etc. Complete As Per Direction Of Engineer-In-Charge. 11.75 Providing And Fixing 16Mm Thick Gang Saw Cut Mirror Polished Premoulded And Prepolished Machine Cut Granite Of Approved Shade, Colour And Texture Of Granite Door Frame. In Cement Mortar 1:3 ( 1 Cement :3 Sand ) Including Rubbing, Curing, Moulding And Polishing Edges To Give High Glossy Finish And Drilling Of Hole For Fixing Stainless Steel Hings, Aldrop, Towerboltetc Complete At All Levels As Per Instruction Of Engineer-In-Charge. 11.75.1 Granite Door Frame For 100Mm Thick Wall Thickness. 11.75.2 Granite Door Frame For 200Mm Thick Wall Thickness. 11.76 Providing And Laying Vitrified Floor Tiles ( Without Soluble Salt ) Or Printed ( With Soluble Salt ) Nano Polished ( Glossy Finish ) In Different Sizes With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, 1St Quality / Premium Quality In Flooring Laid On 20Mm Thick Cement Mortar 1:4 ( 1Cement :4Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 11.76.1 Plain Ivory Light Shade : Size 600X600mm Thickness 9-10Mm 11.76.2 Dark Shade ( Terracotta ) : Size 600X600mm Thickness 9-10Mm 11.77 Providing And Laying Vitrified Floor Tiles ( Without Soluble Salt ) Or Printed ( With Soluble Salt ) Nano Polished ( Glossy Finish ) In Different Sizes With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, 1St Quality / Premium Quality In Skirting Laid On 12Mm Thick Cement Mortar 1:4 ( 1Cement :4Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 11. 77.1 Plain Ivory Light Shade : Size 600X600mm Thickness 9-10Mm 11. 77.2 Dark Shade ( Terracotta ) : Size 600X600mm Thickness 9-10Mm 11.78 Providing And Laying Vitrified Floor Tiles Multi / Double Charged ( Minimum Top Layer Thickness 2.0Mm ) Neno Polished Self Design, In Different Size With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, Quality / Premium Quality In Flooring Laid On 12Mm Thick Cement Mortar 1:4 ( 1Cement :4Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 11. 78.1 In Light Shade Glossy / Rustic / Stain Finished 11. 78.1.1 Size 600X600 Mm Thickness 9-10 Mm 11. 78.1.2 Size 800X800mm Thickness 11-12Mm 11. 78.1.3 Size 800X1200 Mm Thickness 11-12Mm 11. 78.2 In Dark Shade Glossy / Rustic / Stain Finished 11. 78.2.1 ( A ) Size 600X600 Mm Thickness 9-10 Mm 11. 78.2.2 ( B ) Size 800X800mm Thickness 11-12Mm 11. 78.2.3 ( C ) Size 800X1200 Mm Thickness 11-12Mm 11.79 Providing And Laying Vitrified Floor Tiles Multi / Double Charged ( Minimum Top Layer Thickness 2.0Mm ) Neno Polished Self Design, In Different Size With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, 1St Quality / Premium Quality In Skirting Laid On 12Mm Thick Cement Mortar 1:4 ( 1Cement :4Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 11. 79.1 In Light Shade Glossy / Rustic / Stain Finished 11. 79.1.1 ( A ) Size 600X600 Mm Thickness 9-10 Mm 11. 79.1.2 ( B ) Size 800X800mm Thickness 11-12Mm 11. 79.1.3 ( C ) Size 800X1200 Mm Thickness 11-12Mm 11. 79.2 In Dark Shade Glossy / Rustic / Stain Finished 11. 79.2.1 ( A ) Size 600X600 Mm Thickness 9-10 Mm 11. 79.2.2 ( B ) Size 800X800mm Thickness 11-12Mm 11. 79.2.3 ( C ) Size 800X1200 Mm Thickness 11-12Mm 11.80 Providing And Laying Vitrified Floor-Tiles Full Body Design Homogenous Body Matt / Rustic Finish In Different Size With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, 1St Quality / Premium Quality In Flooring Laid On 20Mm Thick Cement Mortar 1:4 ( 1Cement :4Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 11. 80.1 In Light Colour And Shades As Ivory, Beige Blanco, Grey Etc. 11. 80.1.1 ( A ) Size 300X300 Mm Thickness 9-10 Mm 11. 80.1.2 ( B ) Size 600X600mm Thickness 9-10Mm 11. 80.1.3 ( C ) Size 600X600 Mm Thickness 11-12Mm ( To Be Used Heavy Duty Indoor Areas Of Non Residencial Buildings Only Such As Schools, Hostels, Libraries Hospitals, Institutions, Offices Etc. ) 11. 80.2 In Dark Colour And Shade Etc. 11. 80.2.1 ( A ) Size 300X300 Mm Thickness 9-10 Mm 11. 80.2.2 ( B ) Size 600X600mm Thickness 9-10Mm 11. 80.2.3 ( C ) Size 600X600 Mm Thickness 11-12Mm ( To Be Used In Heavy Duty Indoor Areas Of Non Residencial Buildings Only Such As Schools, Hostels, Libraries Hospitals, Institutions, Offices Etc. ) 11.81 Providing And Laying Vitrified Floor-Tiles Full Body Design Homogenous Body Matt / Rustic Finish In Different Size With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, 1St Quality / Premium Quality In Skirting, Riser Laid On 12Mm Thick Cement Mortar 1:4 ( 1Cement :4Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 11. 81.1 In Light Colour And Shades As Ivory, Beige Blanco, Grey Etc. 11. 81.1.1 ( A ) Size 300X300 Mm Thickness 9-10 Mm 11. 81.1.2 ( B ) Size 600X600mm Thickness 9-10Mm 11. 81.2 In Dark Colour And Shades Etc. 11. 81.2.1 ( A ) Size 300X300 Mm Thickness 9-10 Mm 11. 81.2.2 ( B ) Size 600X600mm Thickness 9-10Mm 11.82 Providing And Laying Digital Print Random Design ( Pgvt ) / ( Gvt ) Vitrified Tiles In Different Sizes With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, 1St Quality / Premium Quality Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 11. 82.1 For Floor Glossy / Rustic / Stain / Matt Finished Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement:4Sand ) 11. 82.1.1 Size 600X600 Mm Thickness 9-10 Mm 11. 82.1.2 Size 800X800mm Thickness 11-12Mm 11.82.1.3 Size 800X1600 Mm Thickness 11-12Mm 11.82.1.4 Size 1000X1000 Mm Thickness 11-12Mm 11. 82.1.5 Size 600X1200 Mm Thickness 11-12Mm 11. 82.1.6 Size 800X1200 Mm Thickness 11-12Mm 11. 82.1.7 Size 1200X1200 Mm Thickness 11-12Mm 11.82.1.8 Size 1200X1800 Mm Thickness 11-12Mm 11.82.1.9 Size 1200X2400 Mm Thickness 11-12Mm 11. 82.2 For Wall Stain / Rustic Finished Laid On 12Mm Thick Cement Mortar 1:3 ( 1 Cement:3Sand ) Prepared Same Day When Mortar Is Still Green I.E.Within 6 Hours, Size 300X600 Mm Thickness 9-10 Mm 11. 82.3 For Wall Polished / Glossy Finished Laid On 12Mm Thick Cement Mortar 1:3 ( 1 Cement:3Sand ) Prepared Same Day When Mortar Is Still Green I.E. Within 6 Hours, Size 300X600 Mm Thickness 9-10 Mm 11.83 Providing And Laying Digital Print Random Design ( Pgvt ) / ( Gvt ) Vitrified Tiles In Different Sizes With Water Absorption Less Than 0.05% And Conforming To Is:15622 Of Approved Make In All Colours& Shades, 1St Quality / Premium In Skirting, Riser Laid Our 12Mm Thick Cement Mortar 113 Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete 11. 83.1 For Skirting, Risers Etc. Glossy / Rustic / Stain / Matt Finished In All Colours And Shades 11. 83.1.1 Size 600X600 Mm Thickness 9-10 Mm 11. 83.1.2 Size 800X800mm Thickness 11-12Mm 11. 83.1.3 Size 600X1200 Mm Thickness 11-12Mm 11. 83.1.4 Size 800X1200 Mm Thickness 11-12Mm 11.84 Granite Work Gang Saw Cut ( Polished Machine Cut ) Of Thickness 12 Mm For Wall Lining, Skirting, Risers Of Steps And Dado ( Veneer Work ) , Back Filling With A Grout Of Average 12 Mm Thick In Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Including Pointing With White Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With An Admixture Of Pigment To Match The Marble Shade: ( To Be Secured To The Beaching By Means Of Cramps, Which Shall Be Paid For Separately ) . 11. 84.1 Area Of Tiles Not Less 0.18 Sqm 11. 84.1.1 Fine Granite Dark Black / Dark Red / White With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11. 84.1.2 Course Granite Light Black / Light Red / Off White With Crystals Of Other Colors And Various Patterns 11. 84.1.3 Gray / Pink / Brown With Various Patterns 11.85 Providing And Laying Gang Saw Cut 12Mm Thick, Mirror Polished Pre Moulded ( Wherever Required ) And Pre Polished Machine Cut Granite Stone Of Required Size And Shape Of Approved Shade, Colour And Texture In Flooring Laid Over 20Mm Thick Base Of Cemnt Mortar 1:4 ( 1Cement:4Sand ) Including Grouting The Joints With White Cement Mixed With Matching Pigments, Epoxy Touch Ups Etc. Complete As Per Direction Of Engineer-In-Charge. 11. 85.1 Area Of Tiles Not Less 0.18 Sqm 11. 85.1.1 Fine Grained Granite Dark Black / Dark Red / White With Self Design / Pattern / Crystals Of Other Colors Of Glitter 11. 85.1.2 Coarse Grained Granite Light Black / Light Red / Off White With Crystals Of Other Colors And Various Patterns 11. 85.1.3 Gray / Pink / Brown With Various Patterns 11. 86 Providing And Fixing Artificial Synthetic Green Long And Fine Yarns Grass, Uv / Water Resistant With Sbr Latex Backing Eco-Friendly Durable High Density 100 % Pp ( Poly Poplin ) Anti Uv Fiber.Denier 12000 Dtex, Stich Rate 18 Stiches Per 10Cm, Stich Density 16800 Stiches / M2, Tufted Weight 1830G / Sqm Approx. 11. 86.1 Roll Size Will Be 25.00M X 2.00M ( 25Mm Thick ) - Weight 150Kg- Per Roll. 11. 86.2 Roll Size Will Be 25.00M X 2.00M ( 40Mm Thick ) - Weight 180Kg- Per Roll. 11.87 Providing And Fixing Laminated ( Engineered Wooden Flooring ) Of Suitable Thickness 10-14 Mm Of Suitable Grade Category Product Of Approved Made Out Of Core High Density Fibre Board ( Hdf ) &Other Component It Treated For Abrasion , Scratch , Moisture Protection, Flame Protection, U.V Resistant. Backing With Eco- Friendly Resins Specified By The Manufacturer .The Material Shall Be Applicable Warranty Formaldehyde Free, Eco Friendly, Highly Recommended For High Traffic Area And Fully Recyclable And Matching Shed And Excluding Quantity Of Skirting And Profile . 11.88 Providing And Fixing Single Layer Homogeneous ( Solid Wooden Flooring ) Of Suitable Thickness 14 - 18 Mm Of Suitable Grade Category Product Of Scratch Protection, Moisture Protection, Flame Protection U.V. Resistant, Backing Under Layer On Min 2 Mm Thickness The Material Shall Be Applicable Warranty Formaldehyde Free, Eco Friendly , Highly Recommended For High Traffic Area And Fully Recyclable And Matching Shade And Excluding Quantity Of Skirting And Profile. 11.89 Providing And Fixing Tuffed 1 / 10” Loop Pile ( Carpet Tile / Carpet ) . En ( Euorpean Standard ) Size 50Cm X 50Cm / Roll Size Of Total Thickness 5.5 Mm And Above With Total Mass Of 4100G / M2approx And With Polyester Fleece Primary Backing With Standard Dimensional Stability With Impact Sound / Noise Reduction And Recommended For High Traffic Acoustical Area. 11.90 Providing And Fixing Spc ( Stone Plastic Composite ) Virgin Pvc Water Resistant Proof Vinyl Flooring With A Thickness Between 4 To 8Mmuv Coated Layer With A Wear Layer Of 0.3 To 0.80Mm With A Spc Core Layer Of 2.00 To 5.00 Mm With A Sop Of Heat Resistant, Voc Free, Easy To Cut, Anti Microbial Protection In The Form Of Tiles, Planks Helpful In Environmental Of Profection Health. 11.91 Providing And Laying Pre Mirror Polished / Pre Polished Fine Grain Machine Cut Sand Stone Tile Flooring 20Mm Thick ( Hardness Should Not Be Less Than 7 And Water Absorption Should Not Be More Than 0.3% ) Of Required Size And Shape Of Approved Shade, Flooring In Plazas Open Staircase And Similar Locations, Laid Over 20 Mm Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Including Grouting The Joint With White Cement Mix With Matching Pigment Etc. Complete As Per Direction Of Engineer-In-Charge. 11. 91.1 300X300mm 11. 91.2 400X400mm 11. 91.3 600X600mm 11.92 Providing And Laying Pre Mirror Polished / Pre Polished Fine Grain Machine Cut Sand Stone Slab Flooring 20Mm Thick ( Hardness Should Not Be Less Than 7 And Water Absorption Should Not Be More Than 0.3% ) Of Required Size Of Area More Then .50 Sqm And Shape Of Approved Shade, Flooring In Plazas Open Staircase And Similar Locations, Laid Over 20Mm Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Including Grouting The Joint With Cement Mix Matching Pigment Etc. Complete As Per Direction Of Engineer -In-Charge. 12.1 Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 12.1.1 1.00Mm Thick With Zinc Coating Not Less Than 275Gm / M² 12.1.2 0.80Mm Thick With Zinc Coating Not Less Than 275Gm / M² 12.1.3 0.63 Mm Thick With Zinc Coating Not Less Than 275Gm / M² 12.2 Straight Cutting In G.S. Sheet Of Any Thickness Roofing For Making Opening Of Area Exceeding 40 Sq. Decimetre For Chimney Stacks, Sky Light Etc. 12.3 Extra For Circular Cutting In C.G.S. Sheet Of Any Thickness Roofing For Making Opening Of Area Exceeding 40 Square Decimetre : 12.4 Providing Ridges Or Hips Of Width 60 Cm Over All Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia. G.I. Limpet And Bitumen Washers Complete. 12.4.1 0.80Mm Thick With Zinc Coating Not Less Than 275Gm / M² 12.4.2 0.63Mm Thick With Zinc Coating Not Less Than 275Gm / M² 12.5 Providing Valleys Of 90Cm Wide Overall In Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Dia. G.I. Limpet And Bitumen Washers Complete. 1.60 Mm Thick With Zinc Coating Not Less Than 350Gm / M² 12.6 Providing And Fixing Of 40 Cm Over All Width Plain, G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts, G.I. Limpet And Bitumen Washer Complete, Bent To Shape And Fixed In Wall With Cement Mortar 1:3 ( 1Cement : 3 Sand ) . 1.00Mm Thick With Zinc Coating Not Less Than 275Gm / M² 12.7 Providing And Fixing 15 Cm Wide 45 Cm Over All Semicircular Plain G.S. Sheet Gutter With Iron Brackets 40X3mm Size, Bolts, Nuts And Washers Etc. Including Making Necessary Connections With Rain Water Pipes Complete. 12.7.1 0.80Mm Thick With Zinc Coating Not Less Than 275Gm / M² 12.7.2 0.63Mm Thick With Zinc Coating Not Less Than 275Gm / M² 12.8 Providing Reinforced By Organic Fibres And / Or Inorganic Synthetic Fibres Cement 6 Mm Thick Corrugated Sheets ( As Per Is: 14871 ) Roofing Up To Any Pitch And Fixing With Polymer Coated J, Or L Hooks, Bolts And Nuts 8 Mm Dia.G.I. Plain And Bitumen Washers Or With Self Drilling Fastener And Epdm Washers Etc. Complete ( Excluding The Cost Of Purlins, Rafters And Trusses ) , Including Cutting Sheets To Size And Shape Wherever Required. 12.9 Extra For Straight Cutting In Reinforced By Organic Fibres And / Or Inorganic Synthetic Fibres Cement Corrugated, Semi Corrugated 6 Mm Thick Sheet Roofing For Making Openings Of Area Exceeding 40 Square Decimeter For Chimney Stacks, Skylights Etc.. 12.10 Extra For Circular Cutting In Reinforced By Organic Fibres And / Or Inorganic Synthetic Fibres Cement Corrugated / Semi Corrugated 6 Mm Thick Sheet Roofing For Making Openings Of Area Exceeding 40 Square Decimeter. 12.11 Extra For Providing And Fixing Wind Ties Of 40X 6 Mm Flat Iron Section. 12.12 Providing And Fixing Ridges And Hips In Fibre Cement Reinforced By Organic Fibres And / Or Inorganic Synthetic Fibres Roofing With Suitable Fixing Accessories Or Self Drilling Fastener And Epdm Washer Etc. Complete. 12.12.1 Corrugated Serrated Adjustable Ridges 12.12.2 Plain Wing Adjustable Ridges 12.12.3 Close Fitting Adjustable Ridges 12.12.4 Unserrated Adjustable Hips 12.13 Providing And Fixing Fibre Cement Reinforced By Organic Fibres And / Or Inorganic Synthetic Fibres Roofing Accessories In All Colours With Polymer Coated J Or L Hooks, Bolts And Nuts And Or G.I. Seam Bolts And Nuts, G.I. Plain And Bitumen Washers Or With Self Drilling Fastener And Epdm Washer Etc. Complete: 12.13.1 Corrugated Apron Pieces 12.13.2 Eaves Filler Pieces 12.13.3 North Light Curves 12.13.4 Ventilator Curves 12.13.5 Barge Boards 12.13.6 Ridge Finials 12.13.7 Special North Light Curves 12.13.8 S Type Louvers 12.14 Providing Flat Iron Brackets 50X3mm Size With Necessary Bolts, Nuts Washers Etc. For Fixing G.S. Sheets Gutters With Purlins. 12.15 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm + 0.05 %, Total Coated Thickness With Zinc Coating 120 Gsm As Per Is:277 In 240 Mpa Steel Grade, 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches While Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self-Drilling / Self-Tapping Screws Of Size ( 5.5X 55Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 12.16 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm + 0.05 % Total Coated Thickness, Zinc Coating 120Gsm As Per Is: 277 In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self-Drilling / Self- Tapping Screws Complete : 12.16.1 Ridges Plain ( 500 - 600Mm ) . 12.16.2 Flashings / Aprons. ( Upto 600 Mm ) 12.16.3 North Light Curves. 12.16.4 Barge Board ( Upto 300 Mm ) 12.16.5 Crimp Curve 12.16.6 Gutter. ( 600 Mm Over All Girth ) 12.17 Providing & Fixing Uv Stabilised Fiberglass Reinforced Plastic Sheet Roofing Up To Any Pitch, Including Fixing With Polymer Coated J Or L Hooks, Bolts & Nuts 8Mm Dia. G.I Plain / Bitumen Washers Complete But Excluding The Cost Of Purlins, Rafters, Trusses Etc. The Sheets Shall Be Manufactured Out Of 2400 Tex Panel Rovigs Incorporating Minimum 0.3% Ultra-Violet Stabiliser In Resin System Under Approximately 2400 Psi And Hot Cured. They Shall Be Of Uniform Pigmentation And Thickness Without Air Pockets And Shall Conform To Is 10192 And Is 12866.The Sheets Shall Be Opaque Or Translucent, Clear Or Pigmented, Textured Or Smooth As Specified. 12.17.1 2Mm Thick Corrugated ( 2.5 Or 4.2 Or 6 ) Or Step-Down ( 2Or 3Or 6 ) As Specified. 12.17.2 2Mm Thick Flat. 12.18 Providing And Fixing Of Sky Lights Consisting Of Multi Cell / Tight Cell Polycarbonate Panel System Of Approved Colour, 16 Mm Thick ( Minimum ) Having Uniform In Color With An Integral Tight-Cell Core Constructed Not To Exceed 4Mmx4mm In A Cross Section, Involved Such As Bolts Nuts And Screws Etc. And Labour For Cutting Bending To Required Profile, Necessary Scaffolding, Hoisting In Position Etc. For Proper Completion Of The Work Etc. Complete As Per Specification Drawings And Direction Of Engineer In Charge. Finished Surface Area Of Roofing Fixed Over Steel Tubular Structure Shall Be Measured For Payment. Ms Tabular Frame Work Shall Be Measured Separately For Payment. 12.18.1 10Mm Thick 12.18.2 16Mm Thick 12.19 Providing Sand Stone Slab 40 To 50 Mm Thick For Roofing And Laying Them In Cement Mortar 1 : 4 ( 1 Cement : 4 Sand ) Over Wooden Karries Or R.C.C. Battens Or Structural Steel Sections ( Karries Or Battens Or Structural Steel Sections To Be Paid Separately ) Including Pointing The Ceiling Joints With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Complete : 12.19.1 Red Sand Stone Slab 12.19.2 White Sand Stone Slab : 12.20 Painting Top Of Roofs With Residual Type Petroleum Bitumen Of Grade Vg 10 Of Approved Quality @ 17Kg Per 10 Sqm Impregnated With A Coat Of Sand At 60 Cum Per 10Sqm Including Cleaning The Slab Surface With Brushes And Finally With A Piece Of Cloth Lightly Soaked In Kerosene Oil Complete : 12.21 Providing And Applying Two Coats Of High Albedo Paint Having Minimum Solar Reflective Index ( Sri ) 108 ( With Solar Reflectance And Thermal Emittance Tested As Per Astm ) C 1549 And Astm C 1371 Respectively ) , Voc Less Than 10 Cc / Gm. The Coating Thickness And The Methodology Of Application Shall Be Strictly As Per Manufacturers Specifications And As Approved By Engineer In Charge. Surface Preparation Includes Cleaning With Metal Wire Brush To Remove All Dust, Fungus Etc., And Washing With Water All Complete. The Contractor Shall Give Guarantee For The Performance Of Sri And Also The Durability Of Coating, All Complete As Per Direction Of Engineer-In-Charge. 12.22 Providing And Fixing Heat Resistant Terrace Tiles ( 300 Mm X 300 Mm X 20 Mm ) With Sri ( Solar Refractive Index ) > 78, Solar Reflection >0.70 And Initial Emittance >0.75 On Waterproof And Sloped Surface Of Terrace, Laid On 20 Mm Thick Cement Sand Mortar In The Ratio Of 1:4 ( 1 Cement : 4 Sand ) And Grouting The Joints With Mix Of White Cement And Marble Powder In Ratio Of 1:1, Including Rubbing And Polishing Of The Surface Upto 3 Cuts Complete, Including Providing Skirting Upto 150 Mm Height Along The Parapet Walls In The Same Manner. 12.23 Providing And Laying Pressed Clay Tiles ( As Per Approved Pattern 20 Mm Nominal Thickness And Of Approved Size ) On Roofs Jointed With Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Mixed With 2% Integral Water Proofing Compound Laid Over A Bed Of 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Sand ) And Finished Neat Complete. 12.24 Providing And Fixing On Roof Pressed Clay Tile ( Mangalore Tile ) 20 Mm Nominal Thickness And Of Approved Size And As Per Approved Pattern On Steel Frame Work Complete ( Steel Frame Work To Be Paid Separately ) 12.25 Providing And Laying On Roof Pressed Clay Tile Ridge ( Mangalore Tile ) Of 20Mm Thickness Of Approved Pattern On Steel Frame Work Complete ( Steel Frame Work To Be Paid Separately ) 12.26 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Stone Aggregate 10Mm And Down Grade ) Including Finishing With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) As Per Standard Design : In 75X75mm Deep Chase 12.27 Making Khurras 45X45 Cm ( Sunk Area ) With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size ) Over P.V.C. Sheet 1Mx1mx400micron, Finished With 12Mm Cement Plaster 1:3 ( 1 Cement : 3 Sand ) And A Coat Of Neat Cement Rounding The Edge And Making And Finishing The Outlet Complete So As To Receive Rain Water / Spillage Water On Roof In A Sunk Area And Completely Rain Out In A Near Perfect Strain Meter Motion Into Rain Water Pipe. 12.28 Providing And Fixing M.S. Holder Bat Clamps Of Approved Design To C.I. Or S.C.I. Rain Water Pipes Embedded In And Including Cement Concrete Blocks 10X10x10cm Of Cement Concrete 1:2:4 Mix ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Cost Of Cutting Holes And Making Good The Walls Etc. 12.28.1 100 Mm Diameter 12.28.2 150 Mm Diameter 12.29 Providing And Fixing Isi Marked Sand Cast Iron Rain Water Pipes. 12.29.1 100 Mm Dia Minimum Wall Thickness 5Mm 12.29.2 150 Mm Dia Minimum Wall Thickness 5Mm 12.30 Providing Lead Caulked Joints To Sand Cast Iron Rain Water Pipes And Fittings : 12.30.1 100 Mm Dia. Pipe 12.30.2 150 Mm Dia. Pipe 12.31 Providing, Fixing And Embedding Sand Cast Iron Accessories For Rain Water Pipes In The Masonry Surrounded With 12 Mm Thick Cement Mortar Of The Same Mix, As That Of Masonry ( Lead Caulking Will Be Paid For Separately ) : 12.31.1 Sand Cast Iron Bend : 12.31.1.1 100 Mm Diameter 12.31.1.2 150 Mm Diameter 12.31.2 Sand Cast Iron Plain Shoes : 12.31.2.1 100 Mm Diameter 12.31.2.2 150 Mm Diameter 12.32 Providing And Fixing On Wall Face Rigid Unplasticised Rigid Pvc ( Upvc ) Single Socketed Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion. 12.32.1 75 Mm Diameter ( Minimum Wall Thickness 1.8Mm ) 12.32.2 110 Mm Diameter ( Minimum Wall Thickness 2.2Mm ) 12.33 Providing And Fixing On Wall Face Unplasticised - Upvc Moulded Fittings / Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion. 12.33.1 Coupler 12.33.1.1 75 Mm ( Minimum Wall Thickness 1.8Mm ) 12.33.1.2 110 Mm ( Minimum Wall Thickness 2.2Mm ) 12.33.2 Single Push Fit Coupler : 12.33.2.1 75 Mm ( Minimum Wall Thickness 1.8Mm ) 12.33.2.2 110 Mm ( Minimum Wall Thickness 2.2Mm ) 12.33.3 Single Tee With Door 12.33.3.1 75X75x75 Mm ( Minimum Wall Thickness 1.8Mm ) 12.33.3.2 110X110x110 Mm ( Minimum Wall Thickness 2.2Mm ) 12.33.4 Single Tee Without Door 12.33.4.1 75X75x75 Mm ( Minimum Wall Thickness 1.8Mm ) 12.33.4.2 110X110x110 Mm ( Minimum Wall Thickness 2.2Mm ) 12.33.5 Bend 87.5° 12.33.5.1 75 Mm Bend ( Minimum Wall Thickness 1.8Mm ) 12.33.5.2 110 Mm Bend ( Minimum Wall Thickness 2.2Mm ) 12.33.6 Shoe ( Plain ) 12.33.6.1 75 Mm Shoe ( Minimum Wall Thickness 1.8Mm ) 12.33.6.2 110 Mm Shoe ( Minimum Wall Thickness 2.2Mm ) 12.34 Providing And Fixing Unplasticised - Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50x50 Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length, Including Cutting Brick Work And Fixing In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) And Making Good The Wall Etc. Complete. 12.34.1 75 Mm ( Minimum Wall Thickness 1.8Mm ) 12.34.2 110 Mm ( Minimum Wall Thickness 2.2Mm ) 12.35 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Fixing Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. 12.36 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Ptmt ( An Engineering Thermoplastic ) Grating Square ( Slit ) 150 Mm Square With A Height Of 8 Mm And Weighing Not Less Than 100 Gms. 12.37 Providing And Fixing 100 Mm / 110 Mm Diameter And 60 Cm Long Rain Water Spout In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) 12.37.1 Stone Ware Spout 12.37.2 Upvc Spout ( Pipe Dia.110 Mm ) 12.38 Providing And Fixing Of Self-Supported Mechanically Seamed Roofing System, Made Of High Quality Steel, Having 340 Mpa Yield Strength, Pre Coated Galvalume Sheet As Per Astm A 792 M Of Base Metal Thickness From 0.8 Mm To 1.6Mm ( Tolerance ± 0.02Mm ) . High Grade Steel Sheet Should Have 55% Aluminum And 45% Zinc Coating By Hot-Dip Process Of Minimum 25 Micron The Rate Includes Supplying, Fixing, Loading Unloading, Hire Charges Of All Plants Machineries, Anchors, Fasteners, Washers, Bolts, Epoxy, Paint And All Wastage Etc. Complete. Accessories And Fixtures Like Hangers / Clamps For Installation Of Lighting / Fixtures / Utility / Duct As Per Requirement And Ventilators, Skylight Can Also Be Provided At Crown / Ridge By Making Cuts Into The Panels Which Is To Be Paid Separately. This Item Shall Be Executed Only By The Agency Which Has All Required Manufacturing Machineries And Necessary Expertise. 12.38.1 Base Metal Thickness 0.8Mm Up To Span 15 Meter 12.38.2 Base Metal Thickness 0.9Mm , Up To Span 18 Meter 12.38.3 Base Metal Thickness 1.0 Mm, Up To Span 21 Meter 12.38.4 Base Metal Thickness 1.1 Mm, Up To Span 23 Meter 12.38.5 Base Metal Thickness 1.2Mm, Up To Span 25Meter 12.38.6 Base Metal Thickness 1.3 Mm, Up To Span 27 Meter 12.38.7 Base Metal Thickness 1.4Mm, Up To Span 29Meter 12.38.8 Base Metal Thickness 1.5 Mm, Up To Span 31 Meter 12.38.9 Base Metal Thickness 1.6 Mm, Up To Span 33 Meter 12.38.10 Providing And Fixing Galvalume 1.0 Mm Thick Clamps / Hangers Of Size 75X140mm With Saddle Of 50Mm Dia, Riveted At One Side And Nut And Bolt At Other Side, To Self-Supported Roofing System By Mechanical Seaming To Suspend Light Fixture / Cable Stay / False Ceiling / Duct Etc., At Their Location Which Should Be Planned Earlier By Engineer-In-Charge. Clamps Shall Be Fixed During Seaming Of Panels. 12.38.11 Providing And Fixing Advanced Type Hurricane Turbo Ventilator To Self- Supporting Roof Having Neck Dia 600Mm Made Of Aluminum Having 24 Nos Vertical Vanes Made Of Aluminum Sheet. Ventilator Should Be Fixed On 1 To 2Mm Thick G.I. Ring Which Shall Be Fixed On 2Mm Thick Polycarbonate Sheet. Polycarbonate Sheet Shall Have Foam Tap Or Rubber Gasket Under And Over It And Fixed By 1 To 2 Mm Thick Aluminum Angle 25X25mm With Self- Tapping Screw To Panels. All Joints Shall Be Sealed By Silicon. Rates I / C Of All Material, Labour Fittings Screw, Rings, Foam Tap, Aluminum Angles Etc. Complete. Deduction Shall Not Be Made For Cutting Area Of Self-Supported Roof. 12.38.12 Providing And Fixing Of 2Mm Thick Polycarbonate Sheet To Self-Supported Roofing System. The Sheet Shall Have Tensile Strength And Elongation As Per Astm D 638, Refractive Index As Per Astm D 592, Light Transmission As Per Astm D 1003 And Specific Gravity As Per Stm D 792. Polycarbonate Sheet Shall Have Foam Tap Or Rubber Gasket Under And Over It And Fixed By 1 To 2 Mm Thick Aluminum Angle 25X25mm With Self- Tapping Screw To Panels. All Joints Shall Be Sealed By Silicon. Rates Include Of All Material, Labour, Fittings, Screw, Foam Tap, Aluminum Angles Etc. Complete. Deduction Shall Not Be Made For Cutting Area Of Self-Supported Roof. 12.39 Supply, Fabrication And Erection Of Three-Dimensional Space Frame Steel Structure Consisting Of Support Node, Primary Space Frame Members, Space Notes Nodes, Bolts, Sleeves ( Nut ) , Purlin Stool, Purlin Etc. To Support Roof Sheet In Plain Or Curved Shape. ( Approximate Zinc Coating Thickness 77 Microns ) And Shall Not Be Less Than 400 G / Sqm ( Approximate Zinc Coating Thickness 56 Microns ) . Bolts, Sleeves And Cones Shall Be Electro-Galvanized To Astm B 633 Type 2, Sc3. Shop Drawings Along With Structural Design Analysis Shall Be Provided By The Manufacturer For Approval Of The Engineer In Charge. Rate Shall Include Cost Of Design, All Material, All Lifts, Labour, Transport, Storage, Machines, Tools And Plants, Wastages, Erection And Installation At Site All Necessary Scaffolding Etc. Necessary To Provide Finished Product But Excluding Cost Of Erection / Construction Of Support Shaft And Roof Sheet. 12.40 Providing And Fixing Roofing Consist Of 0.8 Mm Thick Galvanized Steel Deck Sheet Confirming To Is 277:1992 Used As Permanent Shuttering Over Which Ms Wire Mesh 3Mm Laid At 100X100 Mm Grid Including Edge Trim Covered With Concrete. This Metal Deck Will Be Supported On Structural Steel Beam With Shear Studs. ( Structural Steel Like Beam, Column, Joists Etc. & Concrete Of Different Grade As Per Design Will Be Paid Separately ) . 12.41 Providing And Fixing In Position Roof Tile Under Lay Using 12Mm Thick ( Minimum ) Moisture / Fire Resistance Heavy Duty Fibre Cement Board ( High Pressure Steam Cured ) Type A, Category 4 Conforming To Is 14862:2000, Fixed On Steel Frame Work Of 610Mmx610mm Or 610Mmx1220mm Grid By Counter Sunk Stainless Screw @ 300Mm C / C All Complete As Per The Drawings. Tiles Etc May Be Laid On The Board Substrate By Sealing The Joints Properly With Filler Material Or Sealant To Ensure No Leakage Through Joints. All Complete As Per Drawings, Specification And As Per Direction Of Engineer-In-Charge. Note - Ms Section Structure And Roof Tile Like Shingles / Mangalorian Tiles Etc Cost Will Be Paid Seprately. 12.42 Providing And Fixing Thermal Insulation Of Ceiling ( Under Deck Insulation ) With Resin Bonded Fibre Glass Wool Conforming To Is: 8183 Density 24Kg / M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags Fixed To Ceiling With Metallic Cleats ( 50X50x3 Mm ) @ 60 Cm And Wire Mesh Of 12.5Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building . 12.43 Providing And Fixing Thermal Insulation With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 16Kg / M3, 50Mm Thick, Wrapped In 200G Virgin Polythene Bags Placed Over Existing False Ceiling And Held In Position By Criss-Crossing Gi Wire. 12.44 Thermal Insulation Of Roofing With Expanded Polystyrene Fixed With Suitable Adhesive To The False Ceiling As Per The Directions Of The Engineer-In-Charge : 12.44.1 With Type N - Normal 50 Mm Thick 12.44.2 With Type Se - Self Extinguishing Type 50 Mm Thick. 12.45 Providing And Laying Thermal Insulation Of Roofing With 40 Mm Thick Impervious Sprayed, Closed Cell Free Rigid Polyurethane Foam Over Deck Insulation Conforming To Is - 12432 Pt. Iii ( Density Of Foam Being 40-45 Kg / Cum ) , Over A Coat Of Polyurethane Primer Applied @ 6-8 Sqm Per Litre, Laying 400 G Polythene Sheet Over Puf Spray And Providing A Wearing Course Of 40 Mm Thick Cement Screed 1: 2 : 4 ( 1 Cement : 2 Sand : 4 Stone Aggregate 20 Mm Nominal Size ) In Chequered Rough Finish, In Panels Of 2.5 Mx2.5 M And Embedding With 24 G Wire Netting And Sealing The Joints With Polymerized Mastic, All Complete As Per Direction Of Engineer-In-Charge. 12.46 Providing And Fixing Thermal Insulation With Resin Bonded Fibre Glass Wool Conforming To Is: 8183 Having Density 24 Kg / M3, 50 Mm Thick, Wrapped In 200G Virgin Polythene Bags Fixed To Wall With Screw, Rawl Plug And Washers And Held In Position By Criss Crossing Gi Wire Etc. Complete As Per Directions Of Engineer-In- Charge. 12.47 Providing And Fixing Thermal Insulation Of Ceiling ( Under Deck Insulation ) With Resin Bonded Rockwool Conforming To Is: 8183, Density 48 Kg / M3, 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags Fixed To Ceiling With Metallic Cleats ( 50X50x3 Mm ) @ 60 Cm And Wire Mesh Of 12.5Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. 12.48 Providing And Fixing Thermal Insulation With Resin Bonded Rock Wool Conforming To Is: 8183, Density 48 Kg / M3, 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags Placed Over Existing False Ceiling And Held In Position By Criss- Crossing Gi Wire. 12.49 Providing And Fixing Thermal Insulation With Resin Bonded Rock Wool Conforming To Is: 8183, Having Density 48 Kg / M3. 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags Fixed To Wall With Screw, Rawl Plug And Washers And Held And In Position By Criss Cossing Gi Wire Etc.Complete As Per Directions Of Engineer-In-Charge. 12.50 Supply And Application Of 48Kg / M3 Density & 50 Mm Thick With A Tolerance Of -2 + 6Mm Of Rockwool Rb Slabs Unfaced ( Binder<3.5% ) ; Conforming To Is: 8183 / Astm C 612 Latest Edition With Amendments. Non- Combustible When Tested As Per Bs 476 Part 4 Or A1 When Tested As Per En: 13501. Two Random Samples From Each Supplied Batch Will Be Test For Shot Content At The Site. The Melting Point Of The Wool Shall Be More Than 1000°C And Wool Shall Be Bio-Soluble In Accordance With Eu Directive 127 / 2008 Or Similar. All Above Mentioned Standard Are As Per Latest Edition With Amendments. 12.51 Supply & Application Of Rockwool Rb Slab 48Kg Density, 50Mm Thick Wrapped In 200G Vergine Polythene Bags For Partition, Ceiling ( Under Deck Insulation ) Conforming To Is: 8183 With Tolerance Of -2 +6Mm Of Rock Wool Rb Slabs Unfaced ( Binder <3.5% ) Conforming To Is: 8183 / Astm C 612 Latest Edition With Amendments. Non-Combustible When Tested As Per Bs 476 Part 4 Or Al When Tested Per En 13501. . Two Random Samples From Each Supplied Batch Will Be Test For Shot Content At The Site. The Melting Point Of The Wool Shall Be More Than 1000°C And Wool Shall Be Bio-Soluble In Accordance With Eu Directive 127 / 2008 Or Similar. All Above Mentioned Standard Are As Per Latest Edition With Amendments. 12.52 Supply & Application Of Rockwool Rb 2 Slab 64Kg / M3, 50Mm Thick, With Gi Wire Netting 24 Swg; Fixing For Nrc Value 1.00 For Acoustics, Thermal & Fire Purpose Conforming To And Is: 8133, Is: 8183 With Tolerance Of -2 + 6Mm Of Rb Slabs Unfaced ( Binder < 3.5% ) ; Conforming To Is: 8183 / Astm C 612 Latest Edition With Amendments. Two Random Samples From Each Supplied Batch Will Be Tested For Shot Content At The Site. The Melting Point Of The Wool Shall Be More Than 1000°C And Wool Shall Be Bio-Soluble In Accordance With Eu Directive 127 / 2008 Or Similar. All Above Mentioned Standard Are As Per Latest Edition With Amendments. 12.53 Supply & Application Of Rockwool Building Roll ( 1.1Mx10m ) 48Kg Density, 50Mm Thick With Fsk ( Foil Scrim Kraft ) Aluminium Foil Facing For Hvac Duct & Building Underdeck Purpose Conforming To Is: 8183, Is: 8183 And Is:8183 A Tolerance Of -2 +6 Mm Of Rockwool Rb Slabs Unfaced ( Binder < 3.5% ) ; Conforming To Is: 8183; / Astm C 612 Latest Edition With Amendments. Non-Combustible When Tested As Per Bs: 476 Part 4 Or Al When Tested As Per En: 13501. Two Random Samples From Each Supplied Batch Will Be Test For Shot Content At The Site. The Melting Point Of The Wool Shall Be More Than 1000°C And It Shall Be Bio-Soluble In Accordance With Eu Directive 127 / 2008 Or Similar. All Above Mentioned Standard Are As Per Latest Edition With Amendments. 12.54 Supply & Application Of Rockwool Building Roll ( 1.1Mx10m ) 48Kg Density, 50Mm Thick With Alg ( Alu & Glass ) Mixture Of Aluminium & Glass Facing For Building Underdeck Application Below Metal Sheet Also Conforming Is: 8183, Is: 8183 And Is: 8183 A Tolerance Of -2+6Mm Of Rockwool Rb Slabs Unfaced ( Binder < 3.5% ) ; Conforming To Is: 8183 / Astm C 612 Latest Edition With Amendments. Non-Combustible When Tested As Per Bs 476 Part 4 Or Al When Tested As Per En 13501. The Maximum Service Temperature Shall Be 700°C. Shot Content Should Be Less Than 2% For 500 Microns & Less Than 10% For 250 Microns When Tested As Per Standard Is: 3144. Two Random Samples From Each Supplied Batch Will Be Test For Shot Content At The Site. The Melting Point Of The Wool Shall Be More Than 1000°C And Wool Shall Be Bio-Soluble In Accordance With Eu Directive 127 / 2008 Or Similar. All Above Mentioned Standard Are As Per Latest Edition With Amendments. 12.55 Providing And Fixing Of Minimum 12Mm Thick, 5 Layered Bubble Reflective Thermal Insulation Made Of 12 Microns Aluminum Foil With Minimum 97% Reflectivity On Both Outer Sides, Under Both Aluminum Foil 4Mm Thick Fr Bubble Insulation With Low Emissivity - 0.032 ( Astm1371 ) , Fire Class A ( Astm E84 ) All Five Layers Of Insulation Shall Be Stick With Each Other By Registered Manufacturer Using Hot Process Without Using Any Kind Of Adhesive. Insulation Shall Be Supplied In 1.10M Wide Roll Width With 50Mm Wide Factory-Made Cuts At Both Sides To Joint Another Roll By Using General Stapler In Case Of New Shed And Adhesive In Case Of Existing Or Self-Supported Roof. 12.55.1 Fixing Of Insulation On New Work By Laying Horizontally On The Purlins And Perpendicular To The Direction Of Purlins And Fixing By Using Self- Tapping Screws At Equal Distance. Place And Align The Second Roll Of Insulation Parallel To The First Roll And Overlaps The Adjacent Rolls. After Insulation Is Fixed Over The Purlins The Metal Sheet Is Placed Over Insulation And Drilled With Self-Tapping Screws With Purlins Etc. Complete, Including All Material And Scaffolding. 12.55.2 Installation Of Insulation In Old Sheds Where The Sheets Have Been Already Fixed Over The Purlins So Insulation Shall Be Fixed Under The Purlins Covering The Roof Bottom. Insulation Roll To Be Unfolded At The Bottom Of The Purlin Horizontally And Parallel To The Roof And Fixed By Using The Self- Tapping Screw With A Washer At Equal Distance Etc. Complete, Including All Material And Scaffolding. 12.55.3 Insulation Of Self-Supported Roof Shall Be Applied Under The Roofing By Using Stud Welding To The Self- Supported Roof At A Distance Not Be More Than 300 Mm In Both Directions. At Each Stud Insulation Roll Shall Be Pushed Against The Studs So That It Gets Punctured And Then Non-Returning Washer Has To Be Applied At The Stud Etc. Complete, Including All Material And Scaffolding. 12.56 Providing And Fixing 50 Mm Thick Extruded Polystyrene Rigid Insulation Board ( Xps ) Of Required Size Over- Deck On Ceiling Surface, Complying With Astm C 578 - Type Vi, Having Thermal Conductivity Of 0.0289 W / Mk As Per Astm C 518, Compressive Strength Of > 350 Kpa Listed As Per Astm C 1621, Density Of 34-36 Kg / M³ As Per Astm D 1622, Water Absorption < 1% By Volume As Per Astm C 272, Oxygen Index Of Minimum 24 As Per Astm D 2863 And Fire Retardant Property As Per Din 4102, With Preferred Stone Or Pre-Cast Tiles Shall Be Laid Over The Xps Board With Suitable Grouting Including Providing Pre-Fabricated Epdm Drain Outlets ( Cement Screed Casting Shall Be Done At The Junction Of Roof And Parapet Walls ) , All As Per The Directions Of Engineer-In-Charge. 12.57 Providing And Fixing 50 Mm Thick Extruded Polystyrene Rigid Insulation Board Of Required Size Underdeck On Ceiling Surface, Complying With Iso 4898:2008 & Astm C 578-08B - Type Vi, Having Thermal Conductivity Of 0.0289 W / M K As Per Astm C 578 Fire Retardant Property As Per Din 4102, Part 1 Of Class B2 And As Per Astm E84 Class A, Fixed With Suitable Water Based Adhesive And Fastener, Complete In All Respect As Per The Directions Of Engineer-In-Charge. 12.58 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With: 12.58.1 10Mm Thick Plaster Of Paris ( Gypsum Anhydrous ) Sheet 10Mm Thick Pop Board 12.58.1.1 Flat Surfaces 12.58.1.2 Curved Surfaces 12.58.1.3 Sunk Or Raised Mouldings 12.58.1.4 Extra For Providing In The Plaster Of Paris ( Gypsum Anhydrous ) Ceiling Above 5 Metre Height From Floor Level. 12.58.2 12.5 Mm Thick Tapered Edge Gypsum Board 12.58.2.1 Plain Board Conforming To Is: 2095- Part I : 2011 ( Board With Bis Certification Marks ) . 12.58.2.2 Fire Resistant Glass Reinforced Gypsum ( Grg ) Board Conforming To Is: 2095- ( Part 3 ) : 1996 ( Board With Bis Certification Marks ) 12.58.2.3 Gypsum Moisture Resistant Board. 12.58.2.4 Fully Perforated Gypsum Plaster Board Having Approx. 15 % Perforated Area With Perforation Size And Pattern As Approved By The Engineer-In-Charge And As Per Manufacturers Specification, With All 4 Side Tapered And Backed By Acoustical Tissue With Nrc Value Not Less Than 0.60. 12.58.3 8 Mm Thick Calcium Silicate Board Made With Calcareous And Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process. 12.59 Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Maint Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre- Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 12.59.1 Gi Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G I Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns ( Minimum ) , Including Factory Painted After Bending . 12.59.2 Gi Metal Ceiling Lay In Perforated Tegular Edge Global White Color Tiles Of Size 595X595 Mm And 0.5 Mm Thick With 8 Mm Drop; Made Of Gi Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And 20% Perforation Area With 1.8 Mm Dia Holes And Having Nrc ( Noise Reduction Coefficient ) Of 0.5, Electro Statically Polyester Powder Coated Of Thickness 60 Microns ( Minimum ) , Including Factory Painted After Bending And Perforation, And Backed With A Black Glass Fiber Acoustical Fleece. 12.59.3 12.5 Mm Thick Square Edge Pvc Laminated Gypsum Tile Of Size 595X595 Mm, Made Of Gypsum Plasterboard, Manufactured From Natural Gypsum As Per Is 2095 Part I And Laminated With White 0.16Mm Thick Fire Retardant Pvc Film On The Face Side And 12Micron Metalized Polyester On The Back Side With All Edges Sealed With The Face Side Pvc Film Which Goes Around And Wraps The Edges And Is Bonded To The Edges And The Back Side Metalized Polyester Film So As To Make The Tile A Ompletely Sealed Unit. 12.59.4 12.5 Mm Thick Fully Perforated Gypsum Board Tile Made From Plasterboard Having Glass Fibre Conforming To Is: 2095 Part I, Of Size 595X595 Mm, Having Perforation Of 9.7X9.7 Mm At 19.4 Mm C / C With Center Borders Of 48 Mm And The Side Borders Of 30 Mm, Backed With Non Woven Tissue On The Back Side, Having An Nrc ( Noise Reduction Coefficient ) Of 0.79, With 50 Mm Resin Bonded Glass Wool Backing. 12.59.5 Glass Fiber Acoustical Suspended Ceiling System With 16 Mm Thick Tegular Edge Or Micro Look Edge Tiles Of Size 595X595mm.The Tiles Should Have Humidity Resistance ( Rh ) Of 99%, Nrc 0.5, Light Reflectance ≥83%, Thermal Conductivity K = 0.052 - 0.057 W / M K, Colour White, Fire Performance Uk Class 0 / Class 1 ( Bs 476 Pt - 6 And7 ) In Module Size Of 600 X 600 X 16Mm With Bio Block Coating On The Face Of The Tile, Suitable For Green Building Application, With Recycled Content Of 38 - 41%. The Tile And Grid System Used Together Should Carry A 15 Year Warranty. 12.59.6 8Mm Thick Non-Asbestos Multipurpose Termite, Fire & Moisture Resistance Cement Bonded Particle Board As Per Is: 14276, White Primedcolour Tiles Of Size 595X595 Mm. 12.59.7 6Mm Thick Non-Asbestos Multipurpose Termite, Fire & Moisture Resistance Cement Bonded Particle Board As Per Is: 14276, White Primed Colour Tiles Of Size 595X595 Mm. 12.60 Providing And Fixing Gi Clip In Metal Ceiling System Of 600X600 Mm Module Which Includes Providing And Fixing ‘C’ Wall Angle Of Size 20X30x20mm Made Of 0.5Mm Thick Pre Painted Steel Along The Perimeter Of The Room With Help Of Nylon Sleeves And Wooden Screws At 300Mm Center To Centre, Suspending The Main C Carrier And In Direction Perpendicular To It At 600Mm Centers With Help Of Suspension Brackets. Wherever The Main C Carrier And Spring T Have To Join, C Carrier And Spring T Connectors Have To Be Used. All Sections To Be Galvanized @ 120 Gms / Sqm ( Both Side Inclusive ) Fixing With Clip In / Swing Down Tiles Into Spring T With 12.60.1 Gi Metal Ceiling Clip In / Swing Down Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5Mm Thick With 25Mm Height, Made Of G I Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns ( Minimum ) , Including Factory Painted After Bending. 12.60.2 Gi Metal Ceiling Clip In / Swing Down Plain Beveled Edge Global White Color Tiles Of Size 600X600 And 0.5Mm Thick With 25Mm Height, Made Of G I Sheet Having Galvanizing Of 100 Gms / Sqm ( Both Sides Inclusive ) And 20% Perforation Area With 1.8Mm Dia Holes And Having Nrc Of 0.5, Electro Statically Polyester Powder Coated Of Thickness 60 Microns ( Minimum ) , Including Factory Painted After Bending And Perforation. 12.61 Providing & Fixing Of Unperforated Antibacterial Metal Tile Ceiling System Comprising Of Tile Of 600Mm Wide And 600Mm Long Manufactured Out Of 0.7Mm Thick Aluminium Alloy 3105 With Beveled Edge Of 4.15Mm Width And Height Of 32Mm. The Tile Will Be Manufactured On Advanced Equipment That Includes Several Levelling Stages In The Manufacturing Process By Approved Certified Manufacturers. The Tile Shall Be Clipped Into Clip In Rail Of 0.5Mm Thick G.I. In Form Of A Grid System Using A Cross Connector. The Clip In Rail Shall Be Supported From Slab By Means Of Rigid Suspension Of 4Mm G.I.Road, Hold On Clamp With Clip. ( Rate Include All Materials And Labour ) . 12.62 Providing And Fixing Board Ceiling Of Approved Quality With Necessary Nails Etc. Complete ( Frame Work To Be Paid Separately ) : 12.62.1 12Mm Thick Insulating Board 12.62.1.1 Natural Colour Insulating Board 12.62.1.2 White Face Insulating Board 12.62.1.3 Flame Retardant Face Insulating Board 12.62.2 Flat Pressed 3 Layer Medium Density Particle Board Or Graded Particle Board ( Grade I ) Is: 3087 12 Mm Thick Marked In Ceiling With Necessary Nails Etc. Complete 12.62.3 6 Mm Thick Plain Multipurpose Cement Board ( High Pressure Steam Cured ) As Per Is : 14862, With Suitable Screws For Fibre Cement Board In Ceiling Etc. Complete 12.62.4 6Mm Thick High Pressure Steam Cured Non Asbestos, Reinforced With Cellulose Fibres, Moistur& Fire Resistance Heavy Duty Fibre Cement Board, Type A, Category 4 Conforming To Is 14862:2000. ( For Wet Areas ) 12.62.5 4 Mm Thick High Pressure Steam Cured Non Asbestos, Pre-Painted, Self- Embossed, Designer Cement Boardtype B, Category 3 Conforming To Is 14862:2000 . Of Approved Texture, Design Patterns 12.63 Extra For Circular Cutting And Wastages In Ceiling With: Board Only ( Frame Work ) Natural Colour Insulating 12 Mm Thick Board Paid Separately. 12.64 Extra For Providing And Fixing Ceiling To Curved Surfaces In Narrow Widths 12.65 Providing And Fixing False Ceiling With 12 Mm Thick Plain / Semi Perforated Or With Design Ceiling Tiles Of Bwp Type Phenol Formaldehyde Synthetic Resin Bonded Pressed Particle Board Conforming To Is:3087, Finished With A Coat Of Aluminium Primer On Both Sides And Edges Including Two Coats Of Synthetic Enamel Paint Of Approved Quality On Exposed Face, Fixed To A Grid Made Out Of Anodised Aluminium ( With 15 Micron Anodic Coating ) The Frame Work Shall Be Suspended From Ceiling By Level Adjusting Hangers Of 6 Mm Dia M.S Rod Fixed To Roof Slab By Means Of Ceiling Cleats And Dash Fastener. The Suspenders Shall Be Placed 600 X 1200 Mm Centre To Centre Including Fixing To The Frame With C.P Brass Screws And Applying A Priming Coat Of Zinc Chromate Yellow Primer ( Aluminium Frame Work Shall Be Paid Separately ) . 12.66 Providing And Fixing Colour Coated Profile Sheet Of Minimum 1015 Mm Effective Cover Width And Nominal 28.5 Mm Deep Ribs With Subtle Square Fluting In The Five Pan At Nominal 203 Mm Centre-To-Centre. The End Rib Shall Be Designed For Anti-Capillary Action, To Avoid Any Seepage Of Water Through The Lateral Overlap. The Sheet Shall Have Brand Marking Of The Manufacturer Giving Product Details On The Back Of The Sheet At Every 1 Meter C / C For Confirming Genuinity Of The Material. The Sheet Shall Be Fixed Using Self- Drilling / Self-Tapping Screws Of Size ( 5.5X 55Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape 12.67 Extra For Providing 3 Mm Thick Translucent White Acrylic Plastic Sheets Of Approved Quality In False Ceiling Instead Of 12 Mm Thick Plain Or Design Particle Board Ceiling Tiles. 12.68 Providing And Fixing Expanded Polystyrene ( Thermacol ) False Ceiling ( Frame Work To Be Paid Separately ) : 12.68.1 With Type N - Normal 50 Mm Thick 12.68.2 With Type Se - Self Extinguishing Type 50 Mm Thick 12.69 Providing And Fixing False Ceiling With Fabric Fixing With Nail Etc. ( Frame Work And Beading To Be Paid Separately ) . 12.69.1 Costing Upto 70 / - Per Metre, 12.69.2 Rs 70- 150 Per Meter 12.69.3 Upto 200 Per Meter 12.70 Providing And Fixing Perforated Aluminium Panel Ceiling Of White / Natural Satin Colour Supplied By Approved Manufacturers Consisting Of Panel Of Standard Size With Bevel Edge, Panel Length Up To 6 M, Coil Coated On A Continuous Paint Line Suitable For Interior Application, Double Baked And Roll Formed From Enamelled Corrosion Resistance Aluminium Alloy Aa 5050 ( Al. Mg ) For Higher Strength And Good Roll Forming Characteristics. Panel Carrier Shall Be Suspended By Means Of G.I. Threaded Rod Having 6 Mm Diameter At A Distance Of 1.5 Mtr. Actual Distance Of Threaded Rod / Carrier Might Vary And To Be Calculated Based On The Actual Drawing And Site Condition. The Measurements Shall Be Wall To Wall Without Any Deductions For Lights, Diffusers, Columns Etc. 12.70.1 With Panels Of Size 300Mm Wide X30mm Deep X 0.7Mm Thick And Panel Carrier Of Size 40.5Mm Wide X 62Mm Deep X 0.9Mm Thick 12.70.2 With Panels Of Size 150Mm Wide X 15.5 Mm Deep X 0.5Mm Thick And Panel Carrier Of Size 32Mm Wide X 39Mm Deep X 0.95Mm Thick 12.70.3 With Panels Of Size 84Mm Widex16mm Deep X 0.5Mm Thick And Panel Carrier Of Size 62Mm Wide X 29Mm Deep X 0.95Mm Thick 12.71 Providing And Fixing Un-Perforated Aluminium Panel Ceiling Supplied By Approved Manufacturers Of Standard White / Natural Satin Shade Consisting Of Panel 30 Mm / 80Mm / 130Mm / 180Mm Wide X 15 Mm Deep X 0.5Mm / 0.6Mm Thick Respectively, With Square Edges Having Panel Length Up To 6 Mtr, Coil Coated On A Continuous Paint Line, Double Baked And Roll Formed From Enamelled Corrosion Resistance Aluminium Alloy Aa 5050 ( Al.Mg ) For Higher Strength And Good Roll Forming Characteristics. The Carrier Shall Be Suspended By Means Of G.I. Suspension Rod 4Mm Diameter, And A Galvanised Suspension Spring Clip At A Distance Of 1.7Mtrs Centre To Centre. Actual Distance Of Threaded Rod / Carrier Might Vary And To Be Calculated Based On The Actual Drawing And Site Condition. The Measurements Shall Be Wall To Wall Without Any Deductions For Lights, Diffusers, Columns Etc. 12.72 Providing And Fixing U Baffle Aluminium Panel Ceiling Of Different Colors And Finish Supplied By Approved Manufacturers, Consisting Of Panel Size 50 Mm Width X 100 Mm Deep Using 0.6 Mm Thick, Panel Length Upto 4 Mtr, Coil Coated On A Continuous Paint Line, Double Baked And Roll Formed From Enamelled Corrosion Resistance Aluminium Alloy Aa 3005 ( Al. Mg ) For Higher Strength And Good Roll Forming Characteristics. Actual Distance Of Threaded Rod / Carrier Might Vary And To Be Calculated Based On The Actual Drawing And Site Condition. The Measurements Shall Be Wall To Wall Without Any Deductions For Lights, Diffuses, Columns Etc. As An Option, Ceiling Area Above U Baffle Can Be Painted By The Contractor In Black Colour Or Any Other Colour As Per The Architect For Better Aesthetics Before Fixing This System. 12.72.1 Standard White / Natural Satin Shade 12.72.2 Wooden Finish 12.73 Supply & Fixing Of Perforated G.I False Ceiling Tile Or Plank Using Torsion Spring Fixing System Supplied By Approved Manufacturer Comprising Of Tile Of 600 Mm Wide And 600 Mm Long Manufactured Out Of 0.5 Mm Thick Or Plank Of 600Mm Wide And 1200 Mm Long Manufactured Out Of 0.6Mm Thick Galvanised Steel Perforated With 2 Mm Dia. At A Distance Of 5Mm Centre To Centre. Non-Woven Felt Made Of Glass- Reinforced Fibre Glued Over The Perforation At The Back Side Of Panels To Provide Noise Reduction Co Efficient Up To 0.7 Nrc. “Tee” Sections, 3.6M Long, With Factory Punched Flanges To Receive Torsion Spring Assembly. Main Tee On Centre Spacing To Match Panel Length. Cross Runners 24 Mm Deep, Inverted “Tee” Sections Designed To Interlock In To Web Of Main Tee Section On Designated Spacing. Cross Tee Length To Match Panel Length. Cross Tees Are Spaced At A Spacing Of 600 Mm On Centre Maximum. The Measurements Shall Be Wall To Wall Without Any Deductions For Lights, Diffusers, Columns Etc. 12.73.1 Tile Of 600 Mm Wide , 600 Mm Long And 0.5 Mm Thick 12.73.2 Plank Of 600Mm Wide , 1200 Mm Long And 0.6Mm Thick 12.74 Providing And Fixing Of Composite Perforated Gypsum Board With Glass Wool Fiber Panel Of Size 595X595x25 Mm With 10Mm Square Perforation Tiles False Ceiling In True Horizontal Level Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Section ( Galvanized @ 120 Gms / Sqm Both Sides Inclusive ) Consisting Of Main “ “T” Runners To Be Suspended From Ceiling Using Gi Slotted Plates Of Size 27X37x25x1.6 Mm Fixed To Ceiling With 12.50 Mm Dia And 40 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85X30x0.80 Mm Spaced @ 1200Mm Centre To Centre Along With Main T, Bottom Exposed Width Of 24Mm Of All T-Sections Shall Be Pre- Painted With Polyester Paint All Complete At All Heights As Per Specifications And Drawings And As Directed By Engineer-In-Charge. 12.75 Providing And Fixing Of Composite Perforated Mdf Board With Glass Wool Fiber Panel Of Size 595X595x18 Mm 10Mm Square Perforation Tiles ( Square / Tegular Edge ) False Ceiling In True Horizontal Level Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Section ( Galvanized @ 120 Gms / Sqm Both Sides Inclusive ) Consisting Of Main “T” Runners To Be Suspended From Ceiling Using Gi Slotted Plates Of Size 27X37x25x1.6 Mm Fixed To Ceiling With 12.50 Mm Dia And 40 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85X30x0.80 Mm Spaced @ 1200Mm Centre To Centre Along With Main T, Bottom Exposed Width Of 24Mm Of All T-Sections Shall Be Pre- Painted With Polyester Paint All Complete At All Heights As Per Specifications And Drawings And As Directed By Engineer-In-Charge. 12.76 Providing And Fixing Of Perforated Gypsum Board With Acoustical Glass Fiber Tissue Faced Panel Of Size 595X595x12.5Mm, Square 10Mm Perforation Tiles ( Square Edge ) False Ceiling Panels In True Horizontal Level Suspended On Interlocking Metal Grid Of Hot Dipped Galvanized Steel Section ( Galvanized @ 120 Gms / Sqm Both Sides Inclusive ) Consisting Of Main “T” Runners To Be Suspended From Ceiling Using Gi Slotted Plates Of Size 27X37x25x1.6 Mm Fixed To Ceiling With 12.50 Mm Dia And 40 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanized Butterfly Level Clips Of Size 85X30x0.80 Mm Spaced @ 1200Mm Centre To Centre Along With Main T, Bottom Exposed Width Of 24Mm Of All T-Sections Shall Be Pre- Painted With Polyester Paint All Complete At All Heights As Per Specifications And Drawings And As Directed By Engineer-In-Charge. 12.77 Providing And Fixing False Ceiling At All Heights With 15 Mm Thick Integral Densified Tegular Edged Non- Cementitious Light Weight Calcium Silicate False Ceiling Tile Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Nrc ( Noise Reduction Coefficient ) Of 0.50 ( Minimum ) As Per Is 8225:1987, ) I.E.50 Mm Long, 8 Mm Outer Diameter M- 6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Pecifications, Drawing And As Per Directions Of The Engineer-In-Charge. 12.78 Providing And Fixing False Ceiling At All Heights With 15 Mm Thick Integral Densified Micro Look Edged Non- Cementitious Light Weight Calcium Silicate False Ceiling Tile Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge.80 Grams Per Sqm ) I.E. 50 Mm Long, 12 Mm Outer Diameter M-6 Dash Fasteners With The Help Of Z Cleat Of 27X37x27x2 Mm, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 22X19x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Centre To Centre And 40Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge. 12.79 Providing And Fixing False Ceiling At All Heights With 15 Mm Thick Integral Densified Mirolook Edge With Bio Safe Coating As Per Iso 7251:2005, Iso 20743:2007 And Iso 21527-1:2008, Making The Tiles Resistant To Bacterial Growth In Case Of Any External Bacterial Contact Made Onto The Surface Of Tiles, Non-Cementitious Light Weight Calcium Silicate False Ceiling Tile Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595 Mm With The Help Of Z Cleat Of 27X37x27x2 Mm, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 22X19x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Centre To Centre And 40Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge. 12.80 Providing And Fixing In Position Wall Panelling At All Heights With 15 Mm Thick Fully Perforated Square / Butt Edge Light Weight Calcium Silicate Panels / Tiles., Non-Cementitious, Reinforced With Fibre And Natural Filler, Having Nrc ( Noise Reduction Coefficient ) Of 0.10-0.20 For Plain And Designer 0.15-0.40 For Pinhole Texture And Nrc 0.45-0.65 For Fully Perforated Tiles As Per Is 8225:1987, Sound Attenuation Sta-32Db. Of 0.75 ( Minimum ) As Per Is 8225:1987, Light Reflectance Of 85% ( Minimum ) , Non-Combustible As Per Bs:476 ( Part-4 ) , 50-52% Recycled Content Including Fly Ash, The Joints Between The Panels Are To Be Duly Jointed And Finished Using Recommended Jointing Calcium Silicate Based Compound And Fibre Joint Tape Roll 50Mm Wide ( 90 Metre ) Roll And Two Coats Of Primer Suitable For Panelling As Per Manufacturers Specification As Per Direction Of Engineer-In-Charge All Complete. With 15 Mm Thick Fully Perforated Square / Butt Edge Light Weight Calcium Silicate Panels / Tiles. 12.81 Providing & Fixing False Ceiling At All Heights With Grg ( Glass Fibre Reinforced Gypsum ) False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Moisture Content Less Than 2%, Humidity Resistance Of 99%, Nrc0.50 To 0.75 As Per Is 8225:1987, Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40 Mm Long Dry Wall Wood Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In- Charge. 12.81.1 With Semi Perforated 12Mm Thick Micro Tegular Edged Grg False Ceiling Tiles. 12.81.2 With Fully Perforated 10Mm Thick Square Edged Grg False Ceiling Tiles For Sound Proof And Acoustic. 12.82 Providing And Fixing 15 Mm Thick Densified Tegular Edged Eco Friendly Light Weight Calcium Silicate False Ceiling Tiles Of Approved Texture Of Size 595 X 595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped 387Alvanized Steel Sections ( 387Alvanized387 @ 120 Grams Per Sqm Including Both Side ) Consisting Of Main ‘T’ Runner Suitably Spaced At Joints To Get Required Length And Of Size 24X38 Mm Made From 0.33 Mm Thick ( Minimum ) Sheet, Spaced 1200 Mm Centre To Centre, And Cros‘T’, Bottom Exposed With 24 Mm Of All Tsections Shall Be Pre-Painted With Polyster Baked Paint, For All Heights, As Per Specifications, Drawings And As Directed By Engineer- In-Charge.Note :- Only Calcium Silicate False Ceiling Area Will Be Measured From Wall To Wall. No Deduction Shall Be Made For Exposed Frames / Opening ( Cut Outs ) Having Area Less Than 0.30 Sqm.The Calcium Silicate Ceiling Tile Shall Have Nrc Value Of 0.50 ( Minimum ) , Light Reflection > 85%, Non- Combustible As Per B.S. 476 Part Iv, 100% Humidity Resistance And Also Having Thermal Conductivity 12.83 Providing And Fixing Upvc Plank, Plank Size ( 340 X 2700 ) Mm As Per Approved Shade, The Panel Shall Be Laser Catted End Of Plank Fixing J-Trim Fixed And Corner Edge Of Ceiling Fixed U Pvc Clip Same Colour And Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 125 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular, J Trim End Clip Includes In This Item Any Other Item Not Be Paid Sepratly Complete In All Respect As Per The Directions Of Engineer-In-Charge. . 12.84 Providing & Fixing Pvc Ceiling System Profile Panel With Click System Interlock Panel Size 4000Mmx340mmx1mm Resistance To Weather Perfect Finish In Wood Grain & Solid Colour Maintenance Free Resistance To Weather Truly Anti Bacterial. With Edge Profile J-Trim On Periphery & Center Profile T-Trim In Panel Joint Complete System To Be Fixed On G.I. Framework Of Ceiling Section At 450 Mm Distance With Enter Section Suspended By Roof By G.I. Angle Hanger In Proper Line & Level Etc Complete . Product Specifications: Meets Or Exceeds The Standard Specification Of ( Astm D-4477 ) And Its Referenced Documents. Observed. ( Tested At 50 Lbs ) Tensile Strength, Mpa: >37.0 Tensile Modulus, Mpa: >2000 Surface Distortion: None At 120F Squareness: <1 / 8” Of Square Length: Within ¼” Of Specification Lock Control: Complies Color Change: <2 Grayscales ( 16 Hrs Under 1200W / M2 Uv Radiation At 50 Degrees ) 12.85 Design Built, Supply And Erection Of Tensile ( Fabric ) Structure System Including Designing And Fabrication In M.S. Steel Tubular Structure As Per Indian Standard Section As Per Approved Design And Shape Including Base Plate, Dash Fastener, Clits Etc. Cutting, Patterning, Plotting And Wielding Of Fabric With The Help Of Tensile Structure Software. Fabric Should Be Wielded By High Frequency Pvc Wielding In Proper Line With Pvc Cader To Be Fixed On End Of The Fabric And To Be Stretched & Fixed On M.S. Design Structure With The Help Of. M.S. Flat Bar With Self-Taping Screw. M.S. Structure To Be Painted With One Coat Of Epoxy Primer With Mrf Pu Paint Of Approved Colour In Desired Shape. With 1050 Gsm Tensile Fabric 12.85.1 With Precontraint Tensile Membrane 1050 Gsm ( 20 Years Warranty ) 12.85.2 With Precontraint Tensile Membrane 1050 Gsm ( 15 Years Warranty ) 13.1 12 Mm Cement Plaster Of Mix : 13.1.1 1:4 ( 1 Cement : 4 Sand ) 13.1.2 1:6 ( 1 Cement : 6 Sand ) 13.2 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix 13.2.1 1:4 ( 1 Cement : 4 Sand ) 13.2.2 1:6 ( 1 Cement : 6 Sand ) 13.3 20 Mm Cement Plaster Of Mix : 13.3.1 1:4 ( 1 Cement : 4 Sand ) 13.3.2 1:6 ( 1 Cement : 6 Sand ) 13.4 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 13.4.1 1:3 ( 1 Cement : 3 Sand ) 13.4.2 1:4 ( 1 Cement : 4 Sand ) 13.5 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Finished With A Floating Coat Of Neat Cement Of Mix 13.5.1 1:3 ( 1 Cement : 3 Sand ) 13.5.2 1:4 ( 1 Cement : 4 Sand ) 13.6 18 Mm Cement Plaster In Two Coats Under Layer 12 Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Sand ) Finished With A Top Layer 6Mm Thick Cement Plaster 1:4 ( 1 Cement : 4 Sand ) . 13.7 18 Mm Cement Plaster In Two Coats Under Layer 12 Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Sand ) And A Top Layer 6Mm Thick Cement Plaster 1:3 ( 1 Cement : 3 Sand ) Finished Rough With Sponge. 13.8 6 Mm Cement Plaster Of Mix : 1:3 ( 1 Cement : 3 Sand ) 13.9 6 Mm Cement Plaster 1:3 ( 1 Cement : 3 Sand ) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of R.C.C. Slabs And Beams. 13.10 Neat Cement Punning 13.11 Rough Cast Plaster Upto 10M Height Above Ground Level With A Mixture Of Sand And Gravel Or Crushed Stone From 6Mm To 10Mm Nominal Size Dashed Over And Including The Fresh Plaster In Two Layers, Under Layer 12Mm Cement Plaster 1:4 ( 1 Cement: 4 Sand ) And Top Layer 10Mm Cement Plaster 1:3 ( 1 Cement: 3 Sand ) Mixed With 10% Finely Grounded Hydrated Lime By Volume Of Cement. Finished With Ordinary Cement. 13.12 Pebble Dash Plaster Upto 10M Height Above Ground Level With A Mixture Of Washed Pebble Or Crushed Stone 6Mm To 12.5Mm Nominal Size Dashed Over And Including Fresh Plaster In Two Layers Under Layer 12Mm Cement Plaster 1:4 ( 1 Cement: 4 Sand ) And Top Layer 10Mm Cement Plaster With Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Mixed With 10% Finely Grounded Hydrated Lime By Volume Of Cement. 13.13 Providing Sand Faced Plaster Upto 10Meter Hight Above Ground Level Concrete Or Brick Masonry Surfaces In Two Coats, Base Coat Of 13 Mm Thick In Cement Mortar 1:4 ( 1 Cement: 4 Sand ) , Clearing The Surface By Combing It And Finishing Coat Of 8 Mm. Thick In Cement Mortar 1:3 ( 1 Cement: 3 Sand ) And Taking Out Surface Grains By Mechanical Arrangement Or Applying Second Coat By Mechanical Means Including Cost Of All Material, Labour, And T And P Including All Lead, Lift And Scaffolding Etc. Complete. 13.14 Extra For Providing And Mixing Water Proofing Material In Cement Plaster Work In Proportion Recommended By The Manufacturers. 13.15 Extra For Plastering 13.15.1 Exterior Walls Of Height More Than 10 M From Ground For Every Additional Height Of 3 M Or Part Thereof 13.15.2 Interior Walls Of Height More Than 6 M From Floor Level For Every Additional Height Of 3 M Or Part Thereof 13.16 Extra For Plastering On Circular Work Not Exceeding 6 M In Radius: 13.16.1 In One Coat 13.16.2 In Two Coats 13.17 Extra For Plastering Done On Moulding Cornices Or Architraves Including Neat Finish To Line And Level: 13.17.1 In One Coat 13.17.2 In Two Coats 13.18 Extra For Plastering Spherical, Groined Ceiling, Flewing Soffits. 13.18.1 Spherical Ceiling 13.18.2 Groined Ceiling 13.18.3 Flewing Soffits 13.19 Washed Stone Grit Plaster On Exterior Walls Of Height Upto 10 M. Above Ground Level In Two Layers, Under Layer 12Mm Cement Plaster 1:4 ( 1 Cement : 4 Sand ) Furrowing The Under Layer With Scratching Tool, Applying Cement Slurry On The Under Layer @ 2 Kg Of Cement Per Square Metre, Top Layer 15Mm Cement Plaster 1:1 / 2:2 ( 1 Cement : 1 / 2 Sand : 2 Stone Chipping 10Mm Nominal Size ) In Panels With Groove All Around As Per Approved Pattern Including Scrubbing And Washing, The Top Layer With Brushes And Water To Expose The Stone Chippings, Complete As Per Specification And Direction Of Engineer- In- Charge ( Payment For Providing Grooves Shall Be Made Separately ) . 13.20 Forming Groove Of Uniform Size 20 Or 15 Mm Wide And 15 Mm Deep In The Top Layer Of Washed Stone Grit Plaster As Per Approved Pattern Using Wooden Battens, Nailed To The Under Layer Including Removal Of Wooden Battens, Repair To The Edges Of Panels And Finishing The Groove Complete As Per Specifications And Direction Of The Engineer-In-Charge : 13.21 Extra For Washed Grit Plaster On Exterior / Interior Walls Of Height More Than 10M From Ground / Floor Level For Every Additional Height Of 3 M Or Part Thereof. 13.22 Extra For Washed Stone Grit Plaster On Circular Work Not Exceeding 6M In Radius ( In Two Coats ) . 13.23 Forming Groove Of Uniform Size From 12X12mm And Upto 25X15mm In The Top Layer Of Washed Stone Grit Plastered Surface As Per Approved Pattern, Including Providing And Fixing Aluminum Channels Of Appropriate Size And Thickness ( Not Less Than 2 Mm ) , Nailed To The Under Layer With Rust Proof Screws And Nails And Finishing The Groove Complete As Per Specifications And Direction Of The Engineer-In-Charge. 13.24 Extra For Using White Cement In Place Of Ordinary Cement In The Top Layer Of The Item Of Washed Stone Grit Plaster. 13.25 Providing And Applying 12 Mm Thick ( Average ) Premixed Formulated One Coat Gypsum Lightweight Plaster Having Additives And Light Weight Aggregates As Vermiculite / Perlite Respectively Conforming To Is: 2547 ( Part -1 And Ii ) 1976, Applied On Hacked / Uneven Background Such As Bare Brick / Block / Rcc Work On Walls And Ceiling At All Floors And Locations, Excluding In Wall Which May Come In Contact With Dampness Finished In Smooth Line And Level Etc. Complete. 13.26 Extra For Addition Of Synthetic Polyester Triangular Fibre Of Length 6Mm, Effective Diameter 10-40 Microns And Specific Gravity Of 1.34 To 1.40 In Cement Plaster / Mortar By Using 125Gms. Of Synthetic Polyester Triangular Fibre For 50 Kgs. Cement Used In Cement Mortar As Per Directions Of Engineer-In-Charge. 13.27 Providing And Fixing Mesh In Vertical And Horizontal Junction Of Rcc And Brick / Aac Work Including Scaffolding And All Lead And Lift Etc. Complete 13.27.1 G.I. Chicken Mesh As Per Isi Specification And In The Required Width With 50Mm Long Bombay Nails Before Plastering Upt 10 Meter Height. 13.27.2 Providing And Fixing Fibre Mesh Of 145 Gsm Weight In Required Width With Cement Mortar Before Plastering Upto 10M Height. 13.28 12 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) : 13.28.1 Flush Band 13.28.2 Sunk Band 13.28.3 Raised Band 13.28.4 Moulded Band 13.29 18 Mm Thick Plain Cement Mortar Band In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) : 13. 29.1 Flush Band 13. 29.2 Sunk Band 13. 29.3 Raised Band 13. 29.4 Moulded Band 13.30 18 Mm Thick Moulded Cement Mortar Band In Two Coats Under Layer 12Mm Thick With Cement Mortar 1:5 ( 1 Cement : 5 Sand ) Top Layer 6Mm Thick With Cement Mortar 1:4 ( 1 Cement : 4 Sand ) . 13.31 Pointing On Brick Work Or Brick Flooring With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) : 13.31.1 Flush / Ruled / Struck Or Weathered Pointing. 13.31.2 Raised And Cut Pointing 13.31.3 Sunk Pointing 13.32 Pointing On Stone Work With Cement Mortar 1:3 ( 1 Cement: 3 Sand ) . 13.32.1 Flush / Ruled Pointing 13.32.2 Raised And Cut Pointing 13.33 Raised And Cut Pointing On Stone Work In White Cement Mortar 1:3 ( 1 White Cement : 3 Marble Dust ) 13.34 Pointing On Stone Slab Ceiling With Cement Mortar 1:2 ( 1 Cement : 2 Sand ) : Flush / Ruled Pointing 13.35 Extra For Pointing On Walls On The Outside / Inside At Height More Than 10 Metre From Ground / Floor Level For Every Additional Height Of 3 M Or Part There Of. 13.36 Providing And Fixing Broken Glass In Cement Mortar 1.3 Including Cost Of Mortar, Over Compound Walls. 13.37 Providing And Fixing Writing Board Green Writing With Chalk ( Regular Modified Polyster Coated Steel Surface ) . Of Sizes. 13.37.1 Size 1200Mmx1800mm 13.37.2 Size 1200Mmx2400mm 13.37.3 Size 1200Mmx3000mm 13.38 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete 13.39 Providing And Applying Plaster Of Paris Punning Of 10 Mm Average Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 13.40 Extra For Lining Out Plaster To Imitate Stone Or Concrete Blocks Walling. 13.41 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand Over The Plastered Wall Surface To Prepare The Surface Even And Smooth I / C All Cost Of Material, Labour And Scaffold Etc In All Position Complete. Note : Putty Shall Be Applied Only On The Internal Walls, For Application On The Exterior Walls Prior Permission Of Apd / Chief Engineer Will Be Required. 13.42 Providing And Applying Special Putty In Two Coats Based Materials Varnish, Belgium Chalk, Turpentine Oil, White Paint, Safeda Including Sand Papering For Making The Surface Smooth For Applying Any Or Vinyl Paints Including All Cost Of Material And Labouretc Complete. 13.43 White Washing With Lime To Give An Even Shade: New Work ( Three Or More Coats ) 13.44 Colour Washing Such As Green, Blue Or Buff To Give An Even Shade: New Work ( Two Or More Coats ) With A Base Coat Of White Washing With Lime. 13.45 Distempering With 1St Quality Acrylic Distemper ( Ready Mixed ) Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Ltr Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per Manufacturers Specification. Two Or More Coat On New Work. 13.46 Wall Painting By Any Mechanical Or Manual Means With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work 13.47 Distempering By Any Mechanical Or Manual Means With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. 13.47.1 One Coat. 13.47.2 Two Coats. 13.48 Wall Painting By Any Mechanical Or Manual Means With Acrylic Emulsion Paint, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. 13.48.1 One Coat. 13.48.2 Two Coats. 13.49 Wall Painting By Any Mechanical Or Manual Means With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre. Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade. 13.50 Finishing Walls By Any Mechanical Or Manual Means With Water Proofing Cement Paint Of Required Shade: New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) . 13.51 Finishing Walls By Only Mechanical Or Manual Means With Textured Exterior Paint Of Required Shade: New Work ( Two Or More Coats Applied @ 3.28 Ltr / 10 Sqm ) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg / 10 Sqm. 13.52 Finishing Walls By Any Mechanical Or Manual Means With Acrylic Smooth Exterior Paint ( Economy Exterior ) Of Required Shade Including All Scaffolding. New Work ( Two Or More Coat Applied @1.67Ltr / 10Sqm Over And Including One Coat Undiluted Exterior Waterproofing Coating @ 2.39 Litre / 10 Sqm With Crack Bridging Ability Of Upto 0.5Mm On Horizontal Surfaces With An Elongation Of 150% And Water Proofing Of Upto 3 Bars On Vertical Surface 13.53 Finishing Walls By Any Mechanical Or Manual Means With Premium Acrylic Smooth Exterior Paint ( Premium Exterior ) Of Required Shade Including All Scaffolding. New Work ( Two Or More Coat Applied @1.67Ltr / 10Sqm Over And Including One Coat Undiluted Exterior Waterproofing Coating @ 2.39 Litre / 10 Sqm With Crack Bridging Ability Of Upto 0.5Mm On Horizontal Surfaces With An Elongation Of 150% And Water Proofing Of Upto 3 Bars On Vertical Surface ) 13.54 Finishing Walls By Any Mechanical Or Manual Means With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : 13.54.1 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @0.90 Ltr / 10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr / 10 Sqm Of Approved Brand Or Manufacture 13.54.2 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @0.90 Ltr / 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr / 10 Sqm Of Approved Brand Or Manufacture. 13.54.3 Two Or More Coats Applied On Walls @ 1.25 Ltr / 10 Sqm. Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr / 10 Sqm. 13.55 Painting With Silicon And Acrylic Emulsion Based Water Thinnable Sealer Of Approved Brand And Manufacture On Wet Or Patchy Portion Of Plastered Surfaces: 13.55.1 One Coat 13.55.2 Two Coats 13.56 Finishing With Epoxy Paint ( Two Or More Coats ) At All Locations Prepared And Applied As Per Manufacturers Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete. 13.56.1 On Steel Work 13.56.2 On Concrete Work 13.57 Painting On G.S. Sheet With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: New Work ( Two Or More Coats ) Including A Coat Of Approved Steel Primer But Excluding A Coat Of Mordant Solution. 13.58 Applying A Coat Of Mordant Solution On G.S. Sheet : 13.58.1 With A Solution Of 38 Gms Of Copper Acetate In A Litre Of Soft Water 13.58.2 With A Solution Made Of 13 Gms Of Hydrochloric Acid In A Solution Of 13 Gms Each Of Copper Chloride, Copper Nitrate And Ammonium Chloride Dissolved In A Litre Of Soft Water. 13.59 Painting ( Two Or More Coats ) On Rain Water, Soil, Waste And Vent Pipes And Fittings With Black Anticorrosive Bitumastic Paint Approved Brand And Manufacture Over And Including A Priming Of Ready Mixed Zinc Chromate Yellow Primer On New Work : 13.59.1 75 Mm Diameter Pipes 13.59.2 100 Mm Diameter Pipes 13.59.3 150 Mm Diameter Pipes 13.60 Painting ( Two Or More Coats ) On Rain Water, Soil, Waste And Vent Pipes And Fittings With Synthetic Enamel Paint Of Approved Brand And Manufacture And Required Colour Over A Priming Coat Of Approved Steel Primer On New Work. 13.60.1 75 Mm Diameter Pipes 13.60.2 100 Mm Diameter Pipes 13.60.3 150 Mm Diameter Pipes 13.61 Painting With Oil Type Wood Preservative Of Approved Brand And Manufacture: New Work ( Two Or More Coats ) 13.62 Providing And Applying Two Coats Of Fire Retardant Paint On Cleaned Wood / Ply Surface @ 3.5 Sqm Per Litre Per Coat Including Preparation Of Base Surface As Per Recommendations Of Manufacturer To Make The Surface Fire Retardant. 13.63 Coal Tarring Two Coats On New Work Using 0.16 And 0.12 Litre Coal Tar Per Sqm In The First Coat And Second Coat Respectively. 13.64 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work. 13.65 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture. 13.66 Painting With Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound ) Content Less Than 150 Grams / Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour. 13.66.1 One Coat. 13.66.2 Two Coats. 13.67 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound ) Content. 13.67.1 With Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Soft Wood ) Having Voc Content Less Than 50 Grams / Litre. 13.67.2 With Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Works Having Voc Content Less Than 250 Grams / Litre. 13.67.3 With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams / Litre. 13.68 Painting With Aluminium Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work. 13.69 Painting With Acid Proof Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: Two Or More Coats On New Work. 13.70 Painting With Black Anti-Corrosive Bitumastic Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work. 13.71 Floor Painting With Floor Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: Two Or More Coats On New Work 13.72 Varnishing With Varnish Of Approved Brand And Manufacture: 13.72.1 Two Or More Coats Of Glue Sizing With Copal Varnish Over An Under Coat Of Flatting Varnish. 13.72.2 Two Or More Coats Glue Sizing With Spar Varnish Or An Under Coat Of Flatting Varnish. 13.73 French Spirit Polishing: Two Or More Coats On New Works Including A Coat Of Wood Filler. 13.74 Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture: New Work. 13.75 Lacqer Polishing On Door Windows By Preparing The Surface Applying Putty Base Course. Prepare The Surface Smooth By Sand Papering And Then Applying Lacqer Polish With Air Compressor. Two Or More Coats On New Works Including A Coat Of Wood Filler. 13.76 Mealamine Polishing On Door Windows By Preparing The Surface Applying Putty Base Course. Prepare The Surface Smooth By Sand Papering And Then Applying Mealamine Polish With Air Compressor. Two Or More Coats On New Works Including A Coat Of Wood Filler. 13.77 Floor Polishing On Masonry Or Concrete Floors With Wax Polish Of Approved Brand And Manufacture. 13.78 Lettering With Black Japan Paint Of Approved Brand And Manufacture. 13.79 Providing And Applying Flakes Textured Homogeneous Wall Finishing System Consisting Of A Two Component System Of Dry Flakes ( 9.5Kgs Per / Pack ) Made Of A Special Grade Of Heat Treated China Clay With Rigid Homopolymer Coated With Fade Resistant Pigments And A 100% Acrylic Polymer Bonding Agent ( 5Kgs / Pack ) Applied Thickness Of The Coating Being Between 0.8-1.2Mm, To Be Applied In Single Coat, On A Cured, Smooth Level Plaster Surface Without Keying, As Per The Shades / Combinations Approved, As Per Manufacturers Directions For Usage, To Be Applied By Approved Applicator Of Manufacturer, As Per Direction / Supervision Of The Engineers-In-Charge Inclusive Of One Coat Of Primer On The Base At All Heights Etc All Complete. 13.80 Providing And Applying Granules Homogeneous Wall Finishing System Consisting Of A Two Component System Of Dry Granules ( 25 Kgs / Pack ) Made Of 92% Silica Particles Coated With Fade Resistant Pigments And A 100% Acrylic Polymer Bonding Agent ( 5 Kgs / Pack ) With The Applied Thickness Of Coating As Required To Be Applied In Single Coat, On A Cured. Smooth Level Plaster Surface Without Keying As Per The Shades / Combinations Approved. As Per The Manufacturers Directions For Usage, To Be Applied By Approved Applicator Of Manufacturer, As Per The Directions / Supervision Of Engineers In Charge, All Complete Inclusive Of Primer On The Base. 13.80.1 0.8-1.2Mm Thickness 13.80.2 2.0-2.5Mm Thickness 13.81 Providing And Applying Roto Wall Finishing System Being A Dispersion Of Inorganic Fillers, Calcite, Pure Silica, Quartz And Broad Spectrum Fungicides Stabilized By An Acrylic Co-Polymer, To Be Applied By Means Of Customized Trowels ( One For Incorporating Material On Base And Spreading And Other For Finishing ) In Single Coat With A Coating Thickness Of 2.0-2-2.5Mm On A Cured Smooth Level Plaster Without Keying, By The Approved Applicator Of Manufacturer, Of The Approved Shade As Per Directions For Usage All Inclusive Including Primer Coat On The Base. 13.82 Providing And Plastering Over Aac Masonary Wall With Polymer Modified Cement Based Readymix Factory Controlled Mortar With Self Curing, Eco- Friendly, Wet Premix In A Mechanical Mixer In Thickness As Specified Below, And Covering Area Of 2.04 Kg Per Sqm / Mm Thickness. The Bulk Density Of Ready Mix Plaster May Vary From 1300 To 1600 Kg / Cum, Water Powder Ratio ( As Per Manufacture’S Direction ) May Vary From 18-22 % By Weight Or As Specified By The Manufacturer And Compressive Strength May Vary From 8-9 Mpa. 13.82.1 6 Mm Thick Plaster For Internal Walls 13.82.2 8 Mm Thick Plaster For External Walls Exposed To Weather. 13.83 Providing And Fixing Including Designing And Uv Printing On Aluminium Composite Material ( Acm ) Sheet In Different Sizes With 720Dpi ( Dot Per Inch ) 13.83.1 Acp Sheet 2Mm Thick 13.83.2 Acp Sheet 3Mm Thick 13.83.3 Acp Sheet 4Mm Thick 13.84 Providing And Fixing Including Designing And Uv Printing On Pvc Foam Sheet Of Different Size With 720 Dpi ( Dot Per Inch ) 13.84.1 Pvc Foam Sheet 3.0 Mm Thick 13.84.2 Pvc Foam Sheet 5.0 Mm Thick 13.84.3 Pvc Foam Sheet 8.0 Mm Thick 13.85 Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade ( Company Depot Tinted ) With Silicon Additives.New Work ( Two Or More Coats Applied @ 1.43 Litre / 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre / 10 Sqm. 13.86 Providing And Fixing 50 Mm Thick Extruded Polystyrene Rigid Insulation Board ( Xps ) Of Required Size Over Outer Wall Surface, Complying With Astm C 578 - Type Vi, Having Thermal Conductivity Of 0.0289 W / Mk As Per Astm And Fire Retardant Property As Per Din 4102, Part 1. Xps Insulation Of Thickness 50Mm Shall Be Placed Over Brushed, Algae Free And Levelled External Wall By Connecting The Ship-Laps Joints And Fixed By The Washer And Self-Tapping Screw Of Suitable Length At Each Corner And At Distance 75Mm From The Edge And Bitumen Shall Be Applied Over The Joints And G.I. Expanded Mesh ( Barfi Jali ) Shall Be Fixed Over Xps Board By A Self- Tapping Screw Of Suitable Length At The Centre Of The Board And 15Mm Pcc Shall Be Applied Over The Board ( Paint Of Suitable Choice Can Be Used ) , All As Per The Directions Of Engineer-In-Charge. 13.87 Providing And Fixing 50 Mm Thick Extruded Polystyrene Rigid Insulation Board Of Required Size Between Cavity Wall, Complying With Iso 4898:2008 & Astm C 578-08B - Type Vi, Having Thermal Conductivity Of 0.0289 W / M K As Per Astm C 578 ( Measured As Per Is 3346 ) , Compressive Strength Of > 350 Kpa Listed As Per Astm D 1621, Density Of 34-36 Kg / Cum As Per Astm D 1622, Water Absorption < 1% By Volume As Per Astm D 2842, Oxygen Index Of 24.1 To 28.1 Listed As Per Astm D 2863, Cell Size 0.4 Mm Of Dia ( Max ) As Per Astm D 3576. Fire Retardant Property As Per Din 4102, Part 1 Of Class B2 And As Per Astm E84 Class A, Fixed With Suitable Water Based Adhesive And Fastener, Complete In All Respect As Per The Directions Of Engineer-In-Charge. 13.88 Painting With Oil Type Wood Preservative Of Approved Brand And Manufacture: Old Work ( One Or More Coats ) 13.89 Scrapping / Sand Papering Of Existing Surface With The Help Of Mechanized Sanding Machine ( Having Mechanical Vaccum Machine With Bag For Dust Collection To Make Surface Even And Smooth ) As Per Direction Of Engineer-In- Charge. 13.90 Providing And Applying 1 Coat Of Triple Booster Primer-Resist Dampness, Efflorescence, Alkali & At The Same Time Improve Top Coat Coverage By 15-20% @1.0 Lt / 10 Sqm, Which Confirms Certfication Of Is 109 / 1968. It Can Be Applied By Brush / Spray Machine And The Work Shall Be Carried Out As Per Secification& The Direction Of The Engineer-In-Charge. 13.91 Finishing Walls With Water Based Anti- Germ Paint Of With Voc < 50 G / L, That Kills Disease Causing Germs, Teflon Based Washability And Anti Fungal Properties In Two Or More Coats @ 1.08 Ltr / 10 Sqm Over Priming Coat Of Interior Primer Applied @ 1.08 Ltr / 10 Sqm Of Required Shade Including Removing Of All Dust Complete As Per Direction Of Engineer- In-Charge And Submission Of Challans Of Materials On Enquiry. 13.92 Providing And Applying In Two Coats Of 250 Micron Thick Each Layer Of Epoxy Coating On Prepared Surface ( Cost Includes Preparing The Plastered Surface Smooth Ready To Receive Epoxy Coating ) For Operation Theater Walls In Desired Colour As Per Direction Of Engineer-In-Charge . 14.1 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50Metres Lead : With Cement Mortar 1:4 ( 1 Cement : 4 Sand ) . 14.2 Fixing Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15 X 10 X 10 Cm With Cement Concrete 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) , Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 Meters Lead : 14.2.1 Door Chowkhats 14.2.2 Window Chowkhats 14.2.3 Clerestory Window Chowkhats 14.3 Fixing Chowkhat In Existing Opening In Brick / Rcc Wall With Dash Fasteners / Chemical Fastener Of Appropriate Size ( 3Nos On Each Vertical Member Of Door Chowkhat And 2 Nos. On Each Vertical Member Of Window Chowkhats ) Including Cost Of Dash Fasteners / Chemical Fastener. 14.4 Making The Opening In Brick Masonry Including Dismantling In Floor Or Walls By Cutting Masonry And Making Good The Damages To Walls, Flooring And Jambs Complete To Match Existing Surface I / C Disposal Of Mulba / Rubbish As Directed By Engineer- In-Charge. For Door / Window / Clerestory Window. 14.5 Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: 14.5.1 Float Glass Panes Of Thickness 4 Mm 14.5.2 Float Glass Panes Of Thickness 5.5 Mm 14.6 Renewing Glass Panes With Now Wooden Fillets Wherever Necessary: 14.6.1 Float Glass Panes Of Thickness 4 Mm 14.6.2 Float Glass Panes Of Thickness 5.5 Mm 14.7 Renewing Glass Panes And Refixing Existing Wooden Fillets: 14.7.1 Float Glass Panes Of Thickness 4 Mm 14.7.2 Float Glass Panes Of Thickness 5.5 Mm 14.8 Supplying And Fixing New Wooden Fillets Wherever Necessary: 14.8.1 2Nd Class Teak Wood Fillets 14.8.2 Haldu / Bija / Kail Wood Fillets. 14.9 Renewal Of Old Putty Of Glass Panes ( Length ) . 14.10 Refixing Old Glass Panes With Putty And Nails. 14.11 Fixing Old Glass Panes With Wooden Fillets ( Excluding Cost Of Fillets ) . 14.12 Providing And Fixing 16 Mm M.S. Fan Clamps Of Standard Shape And Size In Existing R.C.C. Slab Including Cutting Chase, Anchoring Clamp To Reinforcement Bar, Including Cleaning, Refilling, Making Good The Chase With Matching Concrete, Plastering And Painting The Exposed Portion Of The Clamps Complete. 14.13 Replacing Sand Stone Slabs In Roofing Laid In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including Necessary Repairs And Cement Pointing With Same Mortar Complete Including Disposal Of Rubbish To Dumping Ground Within 50 Metres Of Lead : 14.13.1 Red / White Sand Stone Slabs 30 To 50 Mm Thick. 14.14 Renewing Wooden Battens In Roofs, Including Making Good The Holes In Wall And Painting With Oil Type Wood Preservative Of Approved Brand And Manufacture Complete Including Removal Of Rubbish To The Dumping Ground Within 50 Metres Lead : 14.14.1 Sal Wood Battens. 14.15 Renewing Wooden Beams In Roofs Including Making Good The Holes In Walls And Painting With Oil Type Wood Preservative Of Approved Brand And Manufacture Complete Including Removal Of Rubbish To The Dumping Ground Within 50 Metres Lead : 14.15.1 Not Exceeding 4.00 Metres In Length. 14.15.1.1 Sal Wood Beams 14.15.1.2 Haldu / Bija / Kail Wood Fillets. 14.15.2 Above 4.00 Metres And Upto 5.00 Metres Length. 14.15.2.1 Sal Wood Beams 14.15.2.2 Haldu / Bija / Kail Wood Fillets. 14.16 Raking Out Joints In Lime Or Cement Mortar And Preparing The Surface For Re-Pointing Or Replastering Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 14.17 Taking Out Wind Ties From Roof Including Cutting Out Rusted Bolts, Nuts Etc. And Removing Materials To Any Distance Within Compound And Stacking. 14.18 Fixing Of Old Wind Tie With New Fittings Including Painting Two Or More Coats With Anticorrosive Bitumastic Paint Of Approved Brand And Manufacturer Over And Including Priming Coat Of Ready Mixed Zinc Chromate Yellow Primer Of Approved Brand. 14.19 Renewing Bottom Rail And / Or Top Runner Of Collapsible Gate Including Making Good All Damages And Applying Priming Coat Of Zinc Chromate Yellow Primer Of Approved Brand And Manufacturer. 14.20 Renewing Wrought Iron Or M.S. Wheel Or Roller Of Steel Door Or Gate And Fitting And Fixing The Same With Necessary Clamps, Nuts And Bolts / Welding And Erection Etc. Complete. 14.20.1 Wheel 50 Mm Dia. And Below. 14.20.2 Wheel Above 50 Mm Dia. 14.21 Providing And Fixing 25 Mm Thick Shutters For Cupboard Etc. : 14.21.1 Panelled Or Panelled And Glazed Shutters : 14.21.1.1 Superior Class Teak Wood Including Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 14.21.1.2 Ist Class Teak Wood Including Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 14.21.2 Glazed Shutters : 14.21.2.1 Superior Class Teak Wood Including Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 14.21.2.2 Ist Class Teak Wood Including Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. 14.22 Providing And Fixing Plain Jaffri Door And Window Shutters Including Bright Or / And Black Enamelled M.S. Butt Hinges With Necessary Screws 35X10mm Laths Placed 35Mm Apart ( Frames To Be Paid Separately ) Including Fixing 50X12mm Beading Complete With: 14.22.1 Second Class Teak Wood. 14.22.2 Hard Wood, Finger Jointed 14.23 Providing And Fixing Curtain Rods Of 1.25Mm Thick Brass Plates With Two Brass Brackets Fixed With Brass Screws And Wooden Plugs Etc. Wherever Necessary Complete. 14.23.1 20 Mm Diameter. 14.23.2 25 Mm Diameter. 14.24 Providing And Fixing M.S. Round Or Square Bars With M.S. Flats At Required Spacing In Wooden Frames Of Windows And Clerestory Windows. 14.25 Providing Joists ( Karries ) Including Hoisting Fixing In Position And Applying Wood Preservative On Unexposed Surface Etc. Complete With: 14.25.1 Sal Wood. 14.25.2 Haldu / Bija / Kail Wood. 14.26 White Washing With Lime Old Work To Give An Even Shade : 14.26.1 Two Or More Coats 14.26.2 One Or More Coats 14.27 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 14.28 Distempering With Dry Distemper Of Approved Brand And Manufacture ( One Or More Coats ) And Of Required Shade On Old Work To Give An Even Shade. 14.29 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade: Old Work ( One Or More Coats ) . 14.30 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 14.31 Painting On G.S. Sheet With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: Old Work ( One Or More Coats ) . 14.32 Painting ( One Or More Coats ) On Rain Water, Soil, Waste And Vent Pipes And Fittings With Black Anticorrosive Bitumastic Paint Of Approved Brand And Manufacture On Old Work : 14.32.1 75 Mm Diameter Pipes 14.32.2 100 Mm Diameter Pipes 14.32.3 150 Mm Diameter Pipes 14.33 Painting ( One Or More Coats ) On Rain Water, Soil, Waste And Vent Pipes And Fittings With Aluminium Paint Of Approved Brand And Manufacture On Old Work : 14.33.1 75 Mm Diameter Pipes 14.33.2 100 Mm Diameter Pipes 14.33.3 150 Mm Diameter Pipes 14.34 Painting ( One Or More Coats ) On Rain Water, Soil, Waste And Vent Pipes And Fittings With Synthetic Enamel Paint Of Approved Brand And Manufacture And Required Colour On Old Work : 14.34.1 75 Mm Diameter Pipes 14.34.2 100 Mm Diameter Pipes 14.34.3 150 Mm Diameter Pipes 14.35 Painting With Oil Type Wood Preservative Of Approved Brand And Manufacture: Old Work ( One Or More Coats ) 14.36 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade: One Or More Coats On Old Work. 14.37 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: One Or More Coats On Old Work. 14.38 Painting With Aluminium Paint Of Approved Brand And Manufacture To Give An Even Shade: One Or More Coats On Old Work. 14.39 Painting With Acid Proof Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: One Or More Coats On Old Work. 14.40 Painting With Black Anti-Corrosive Bitumastic Paint Of Approved Brand And Manufacture To Give An Even Shade: One Or More Coats On Old Work. 14.41 French Spirit Polishing: One Or More Coats On Old Work. 14.42 Mealamine Polishing On Wood Work By Preparing The Surface Applying Putty Base Course. Prepare The Surface Smooth By Sand Papering And Then Applying Mealamine Polish With Air Compressor. One Or More Coats On Old Work. 14.43 Lacquer Polishing On Wood Work By Preparing The Surface Applying Putty Base Course. Prepare The Surface Smooth By Sand Papering And Then Applying Lacquer Polish With Air Compressor 14.43.1 One Or More Coats On Old Work. 14.44 Polishing On Wood Work With Readymade Wax Polish Of Approved Brand And Manufacture : 14.44.1 Old Work 14.45 Re-Lettering With Black Japan Paint Of Approved Brand And Manufacture. 14.46 Painting ( One Or More Coats ) With Black Japan Paint Of Approved Brand And Manufacture To Give An Even Shade. 14.47 Providing And Fixing C.P. Brass Chain And Rubber Plug Complete For Sink Or Wash Basin : 14.47.1 32 Mm Dia 14.47.2 40 Mm Dia 14.48 Distempering With 1St Quality Acrylic Washable Distemper ( Ready Mixed ) Of Approved Manufacturer And Of Required Shade And Colour Complete. As Per Manufacturers Specification. One Or More Coats On Old Work. 14.49 Finishing Walls With Water Proofing Cement Paint Of Required Shade : 14.49.1 Old Work ( One Or More Coats Applied @ 2.20 Kg / 10 Sqm ) Over Priming Coat Of Primer Applied @ 0.80 Liters / 10 Sqm Complete Including Cost Of Priming Coat. 14.49.2 Old Work ( One Or More Coats @ 2.20 Kg / 10 Sqm ) Complete. 14.50 Finishing Walls With Textured Exterior Paint Of Required Shade : 14.50.1 Old Work ( Two Or More Coats On Existing Cement Paint Surface Applied @ 3.28 Ltr / 10 Sqm. 14.50.2 Old Work ( One Or More Coats ) Applied @ 1.82 Ltr / 10 Sqm. 14.51 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 14.51.1 Old Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm ) On Existing Cement Paint Surface ) . 14.51.2 Old Work ( One Or More Coat Applied @ 0.90 Ltr / 10 Sqm ) . 14.52 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade 14.52.1 Old Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm ) Over Existing Cement Paint Surface. 14.52.2 Old Work ( One Or More Coats Applied @ 0.83 Ltr / 10 Sqm ) . 14.53 Finishing Walls With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : 14.53.1 One Or More Coats Applied On Walls @ 0.85 Ltr / 10 Sqm. 14.53.2 Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. One Or More Coat Applied @0.70 Ltr / 10 Sqm 14.53.3 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. One Or More Coat Applied @0.70 Ltr / 10 Sqm. 14.54 Varnishing With Varnish Of Approved Brand And Manufacture: 14.54.1 One Or More Coats With Copal Varnish. 14.54.2 One Or More Coats With Spar Varnish. 14.55 Melamine Polishing On Wood Work ( One Or More Coat ) . Old Work 14.56 Varnishing With Flatting Varnish Of Approved Brand And Manufacture One Or More Coats On Old Work. 14.57 Floor Painting With Floor Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade. One Or More Coat On Old Work. 14.58 40 Mm Thick Stone Flooring Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:5 ( 1 Cement : 5 Sand ) Including Pointing With Cement Mortar 1:2 ( 1 Cement : 2 Sand ) With An Admixture Of Pigment To Match The Shade Of Stone. Red Sand Stone / White Sand Stone ) Stone To Be Supplied By The Department. 14.58.1 Rough Chiseled Dressed Stone 14.58.2 Fine Dressed Stone 14.59 Coursed Rubble Masonry ( Second Sort ) With Hard Stone In Cement Mortar 1:6 ( 1 Cement : 6 Sand ) ( Stone Shall Be Supplied By The Department ) 14.60 Laying Old Cement Concrete Interlocking Paver Blocks Of Any Design / Shape Laid In Required Line, Level, Curvature, Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Sand, Filling The Joints With Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. ( Old Cc Paver Blocks Shall Be Supplied By The Department Free Of Cost ) . 14.61 Laying At Or Near Ground Level Old Kerb Stones Of All Types In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Including Making Joints With Or Without Grooves ( Thickness Of Joints, Except At Sharp Curve, Shall Not Be More Than 5Mm ) Including Making Drainage Opening Wherever Required Etc. Complete As Per Direction Of Engineer-In- Charge. ( Length Of Finished Kerb Edging Shall Be Measured For Payment ) . ( Old Kerb Stones Shall Be Supplied By The Department Free Of Cost ) . 14.62 Colour Washing With Lime To Give An Even Shade: 14.62.1 ( One Or More Coats ) 14.62.2 ( Two Or More Coats ) 14.63 Conducting Adequate Nos. Of Scanning To Detect The Steel Reinforcement In Existing Rcc Elements By Using Ground / Wall Penetrating Radar System To Avoid The Cutting Of Main Bars During Drilling For Inserting Bolts Etc. Complete. 14.64 Chipping, Removing, Carefully Loose Plaster And Concrete Work By Low Impact Hammer, Breaker Without Damaging The Structure As Instructed By Engineer-In-Charge. 14.70 Rebaring Of Tmt Bars By Drilling Hole & Embedding Bars Of Different Diameter Using Epoxy Grouting Compound Including All Tools And Tackles Complete. 14.70.1 8 Mm Dia Bar 10 Mm Dia Hole 14.70.2 10 Mm Dia Bar 12 Mm Dia Hole 14.70.3 12 Mm Dia Bar 16 Mm Dia Hole 14.70.4 16 Mm Dia Bar 20 Mm Dia Hole 14.70.5 20 Mm Dia Bar 25 Mm Dia Hole 14.70.6 25 Mm Dia Bar 32 Mm Dia Hole 14.70.7 32 Mm Dia Bar 40 Mm Dia Hole 14.71 Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Chromium Plated Brass Screws Etc. Complete. 14.71.1 125X70x4 Mm ( Ordinary Type ) 14.71.2 100X70x4 Mm ( Ordinary Type ) 14.71.3 75X65x4 Mm ( Heavy Type ) 14.71.4 75X40x2.5 Mm ( Ordinary Type ) 14.71.5 50X40x2.5 Mm ( Ordinary Type ) 14.72 Providing And Fixing 85X42 Mm Chromium Plated Brass Pull Bolt Lock With Necessary Chromium Plated Brass Screws, Nuts, Bolts And Washers Etc. Complete. 14.73 Repair To Plaster Of Thickness 12Mm To 20 Mm In Patches Of Area 2.5 Sqm And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing Plastering The Wall Surface With White Cement Based Polymer Modified Self Curing Mortar, Including Disposal Of Rubbish, All Complete As Per The Direction Of Engineer-In-Charge. 14.74 Cleaning Of Terrace / Loft Water Storage Tank ( Inside Surface Area ) Upto 2000 Litre Capacity At All Heights With Coconut Brushes, Duster Etc., Removal Of Silt, Rubbish From The Tank And Cleaning The Tank With Fresh Water Disinfecting With Bleaching Powder @ 0.5Gm Per Litre Capacity Of F Tank Body With The Help Of Stencil And Paint And Disposing Of Malba All Complete As Per Direction Of Engineer-In- Charge. ( The Old Date Already Written On Tank Should Be Removed With Paint Remover Or Black Paint And If Date Is Not Written With The Stencil Or Old Date Is Not Removed Deduction Will Be Made @ Rs. 0.10 Per Litre ) ( If During Cleaning Any Gi Fittings Or Ball Cock Is Damaged That Is To Be Repaired By Contractor At His Own Cost And Nothing Extra Will Be Paid On This Account ) 14.75 Cleaning And Desilting Of Gully Trap Chamber, Including Removal Of Rubbish Mixed With Earth Etc. And Disposal Of Same, All As Per The Direction Of Engineer- Incharge. 14.77 Cleaning Of Reinforcement From Rust From The Reinforcing Bars To Give It A Total Rust Free Steel Surface By Using Alkaline Chemical Rust Remover Of Approved Make With Paint Brush And Removing Loose Particles After 24 Hours Of Its Application With Wire Brush And Thoroughly Washing With Water And Allowing It To Dry, All Complete As Per Direction Of Engineer-In-Charge. 14.77.1 Bars Upto 12 Mm Diameter 14.77.2 Bars Above 12 Mm Diameter 14.78 Drilling Suitable Holes In Reinforced Or Plain Cement Concrete With Power Driven Drill Machine To A Minimum Depth Of 100Mm Upto 200Mm In Rcc Beams, Lintels, Columns And Slabs To Introduce Steel Bars For Sunshades / Balconies Including Fixing The Steel Bars In Position Using Epoxy Resin Anchor Grout Of Approved Make But Excluding The Cost Of Reinforcement, All Complete As Per Direction Of Engineer-In-Charge. 14.78.1 Upto And Including 12Mm Dia 14.83 Providing And Injecting Approved Grout In Proportion Recommended By The Manufacturer Into Cracks / Honey-Comb Area Of Concrete / Masonry By Suitable Gun / Pump At Required Pressure Including Cutting Of Nipples After Curing Etc. Complete As Per Directions Of Engineer-In-Charge. ( The Payment Shall Be Made On The Basis Of Actual Weight Of Approved Grout Injected. ) 14.83.1 Stirrer Mixed Acrylic Polymer Of Approved Make @ 2% Of Weight Of Cement Used ) Modified Cement Slurry Made With Non Shrink Compound In Concrete / Rcc Work 14.83.2 Stirrer Mixed Sbr Polymer ( Of Approved Make ) Modified Cement Slurry Made With Shrinkage Compensating Cement In Concrete / Rcc Work. 14.83.3 Epoxy Injection Grout In Concrete / Rcc Work Of Approved Make 14.85 Cleaning Of Exposed Concrete Surface Of Sticking Material Including Loose And Foreign Material By Sand Blasting With Coarse Sand Followed By And Including Cleaning With Oil Free Air Blast As Per Direction Of Engineer In Charge. 14.88 Providing And Fixing Hard Drawn Steel Wire Fabric Of Size 75 X25 Mm Mesh Or Other Suitable Size Wire Mesh To Be Fixed & Firmly Anchored To The Concrete Surface By Means Of L Shaped Mild Steel Shear Key Welded With Existing Reinforcement Including The Cost Of Materials, Labour, Tool & Plants As Approved By Engineer-Incharge. 15.1 Demolishing Lime Concrete Manually / By Mechanical Means And Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. 15.2 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer-In- Charge. 15.2.1 Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) . 15.2.2 Nominal Concrete 1:4:8 Or Leaner Mix ( I / C Equivalent Design Mix ) . 15.3 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In- Charge. 15.4 Extra For Cutting Reinforcement Bars Manually / By Mechanical Means In R.C.C. Work ( Payment Shall Be Made On The Cross Sectional Area Of R.C.C. Work ) As Per Direction Of Engineer-In- Charge. 15.5 Extra For Scrapping, Cleaning And Straightening Reinforcement From R.C.C. Work. 15.6 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In- Charge. 15.6.1 In Lime Mortar With Old Mughal Bricks. 15.6.2 In Lime Mortar. 15.6.3 In Cement Mortar. 15.7 Removing Mortar From Bricks And Cleaning Bricks Including Stacking Within A Lead Of 50 M ( Stacks Of Cleaned Bricks Shall Be Measured ) : 15.7.1 From Brick Work In Lime Mortar. 15.7.2 From Brick Work In Cement Mortar. 15.8 Demolishing Stone Rubble Masonry Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In- Charge: 15.8.1 In Lime Mortar. 15.8.2 In Cement Mortar. 15.9 Dismantling Dressed Stone Work Ashlar Face Stone Work, Marble Work Or Precast Concrete Work Manually / By Mechanical Means Including Stacking Of Serviceable And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge: 15.9.1 In Lime Mortar. 15.9.2 In Cement Mortar. 15.10 Removing Mortar From And Cleaning Stones And Concrete Articles ( Net Quantity Of Stacks Of Cleaned Materials Will Be Measured ) : 15.10.1 In Lime Mortar. 15.10.2 In Cement Mortar. 15.11 Dismantling Tile / Kota Stone / Marble / Granite Work In Floors / Walls And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. 15.11.1 For Thickness Of Tiles 10 Mm To 25 Mm. 15.11.2 For Thickness Of Tiles Above 25 Mm And Upto 40 Mm. 15.12 Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 15.13 Taking Out Existing Cc Interlocking Paver Blocks From Footpath / Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. 15.14 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : 15.14.1 Of Area 3 Sq. Metres And Below. 15.14.2 Of Area Beyond 3 Sq. Metres. 15.15 Taking Out Doors, Windows And Clerestory Window Shutters ( Steel Or Wood ) Including Stacking Within 50 Metres Lead: 15.15.1 Of Area 3 Sq. Metres And Below. 15.15.2 Of Area Beyond 3 Sq. Metres. 15.16 Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Upto 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead: 15.16.1 Of Sectional Area Below 40 Square Centimetres. 15.16.2 Of Sectional Area 40 Square Centimetres And Above. 15.17 Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Wood Work For Every Additional Span Of One Metre Or Part Thereof Beyond 10 Metres : 15.17.1 Of Sectional Area Below 40 Square Centimetres. 15.17.2 Of Sectional Area 40 Square Centimetres And Above. 15.18 Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Wood Work For Every Additional Height Of One Metre Or Part Thereof Beyond 5 Metres : 15.18.2 Of Sectional Area Below 40 Square Centimetres. 15.18.1 Of Sectional Area 40 Square Centimetres And Above. 15.19 Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: 15.19.1 R.S. Joists 15.19.2 Channels, Angles, Tees And Flats 15.20 Dismantling Steel Work In Built Up Sections With Span Upto 10 Meter And Hieght 5 Meter In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Including Dismembering And Stacking Within 50Metres Lead. 15.21 Dismantling Steel Work Manually / By Mechanical Means In Built Up Sections With Span Upto 10 Meter And Hieght 5 Meter Without Dismembering And Stacking Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. 15.22 Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Steel Work For Every Additional Span Of One Metre Or Part Thereof Beyond 10 Metres 15.23 Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Steel Work For Every Additional Height Of One Metre Or Part Thereof Beyond 5 Metres. 15.24 Extra For Marking Of Structural Steel Work Required To Be Re- Erected. 15.25 Removal Of Old Tarfelt I / C Disposal As Directed By Engineer In Charge. 15.26 Demolishing Brick Tile Covering In Terracing Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 15.27 Dismantling Roofing Including Ridges, Hips Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of: 15.27.1 G.S. Sheet 15.27.2 Asbestos / Non Asbestors Sheet 15.28 Dismantling Stone Slab Roofing Over Wooden Karries Or R.C.C. Battens ( Dismantling Karries And Battens To Be Paid For Separately ) Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 15.29 Dismantling Tiled Roofing With Battens Boarding Etc. Complete Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 15.30 Dismantling Wooden Ballies In Posts And Struts Including Stacking Within 50 Metres Lead. 15.31 Dismantling And Stacking Within 50 Metres Lead, Fencing Posts Or Struts Including All Earth Work And Dismantling Of Concrete Etc. In Base Of : 15.31.1 T’ Or ‘L’ Iron Or Pipe 15.31.2 R.C.C. 15.32 Cutting Ballies Or Wooden Posts Of Fencing At The Point Of Projection Above The Concrete Or Ground And Stacking The Same Within 50 Metres Lead. 15.33 Dismantling Barbed Wire Or Flexible Wire Rope In Fencing Including Making Rolls And Stacking Within 50 Metres Lead. 15.34 Dismantling Wooden Trellis Work Excluding Frames But Including Stacking The Serviceable Material Within 50 Metres Lead. 15.35 Dismantling Expanded Metal Or I.R.C. Fabrics With Necessary Battens And Beading Including Stacking The Serviceable Material Within 50 Metres Lead. 15.36 Dismantling Wooden Boardings In Lining Of Walls And Partitions, Excluding Supporting Members But Including Stacking Within 50 Metres Lead : 15.36.1 Upto 10 Mm Thick 15.36.2 Thickness Above 10 Mm Upto 25 Mm 15.36.3 Thickness Above 25 Mm Upto 40 Mm 15.37 Dismantling Precast Concrete Or Stone Slabs In Walls, Partition Walls Etc. Including Stacking Within 50 Metres Lead: 15.37.1 Thickness Upto 40 Mm 15.37.2 Thickness Above 40 Mm Upto 75 Mm 15.38 Dismantling Cement Asbestos Or Other Hard Board Ceiling Or Partition Walls Including Stacking Of Serviceable Materials And Disposal Of Unserviceable Materials Within 50 Metres Lead. 15.39 Dismantling C.I. Or Asbestos Rain Water Pipe With Fittings And Clamps Including Stacking The Material Within 50 Metres Lead : 15.39.1 75 To 80 Mm Dia Pipe. 15.39.2 100 Mm Dia Pipe 15.39.3 150 Mm Dia Pipe 15.40 Dismantling G.I. Pipes ( External Work ) Including Excavation And Refilling Trenches After Taking Out The Pipes Manually / By Mechanical Means Including Stacking Of Pipes Within 50 Metres Lead As Per Direction Of Engineer-In-Charge : 15.40.1 15 Mm To 40 Mm Nominal Bore 15.40.2 Above 40 Mm Nominal Bore 15.41 Dismantling C.I. Pipes Including Excavation And Refilling Trenches After Taking Out The Pipes Manually / By Mechanical Means, Breaking Lead Caulked Joints, Melting Of Lead And Making Into Blocks Including Stacking Of Pipes And Lead At Site Within 50 Metre Lead As Per Direction Of Engineer-In-Charge: 15.41.1 Upto 150 Mm Diameter 15.41.2 Above 150 Mm Dia Upto 300 Mm Dia. 15.41.3 Above 300 Mm Diameter 15.42 Taking Out C.I. Cover With Frame From R.C.C. Top Slab Of Manholes Of Various Sizes Including Demolishing Of R.C.C. Work Manually / By Mechanical Means And Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead As Per Direction Of Engineer-In- Charge. 15.43 Taking Out C.I. Cover With Frame From R.C.C. Top Slab Of Inspection Chambers Of Various Sizes Including Demolishing Of R.C.C. Work Manually / By Mechanical Means And Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead As Per Direction Of Engineer-In- Charge. 15.44 Dismantling Of Road Gully Chamber Of Various Sizes Including C.I. Grating With Frame Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead Including Refilling The Excavated Gap. 15.45 Dismantling Of Flushing Cistern Of All Types ( C.I. / Pvc / Vitrious China ) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead. 15.46 Dismantling Of C.I. Sluice Valve Including Stacking Of Useful Materials Within A Lead Of 50 Metres 15.46.1 Upto 150 Mm Diameter 15.46.2 Above 150 Mm Diameter 15.47 Dismantling Of Spindle Fire Hydrant Including Stacking Of Useful Materials Within 50 Metres Lead. 15.48 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 15.49 Dismantling Aluminium / Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Surplus Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. 15.50 Dismantling Of Old S.W. Pipes Including Breaking Of Joints And Bed Concrete Stacking Of Useful Materials Near The Site Within 50 M Lead And Disposal Of Unserviceable Materials Into Municipal Dumps: 15.50.1 100 Mm Diameter 15.50.2 150 Mm Diameter 15.50.3 200 Mm Diameter 15.50.4 250 Mm Diameter 15.50.5 300 Mm Diameter 15.50.6 350 Mm Diameter 15.50.7 400 Mm Diameter 15.50.8 440 Mm Diameter 15.51 Dismantling Of Manhole Including R.C.C. Top Slab, C.I. Cover With Frame Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Into Municipal Dumps Within 50 M Lead : 15.51.1 Rectangular Manhole 90X80 Cm And 45 Cm Deep 15.51.2 Rectangular Manhole 120X90 Cm And 90 Cm Deep. 15.51.3 Rectangular Arch Type Manhole 140X90cm And 2.45M Deep. 15.51.4 Circular Manhole 122 Cm Diameter And 1.68 M Deep 15.52 Extra For Depth Of Manholes Dismantled: 15.52.1 Rectangular Manhole 90X80 Cm And Beyond 45 Cm Depth. 15.52.2 Rectangular Manhole 120X90 Cm And Beyond 90 Cm Depth. 15.52.3 Rectangular Arch Type Manhole 140X90 Cm And Beyond 2.45M Deep ( Upto 4.25 M Depth ) . 15.52.4 Circular Manhole 122 Cm Diameter And Beyond 1.68 M Deep ( Upto 2.29 M Depth ) . 15.53 Taking Out Existing Kerb Stones Of All Types From Footpath / Central Verge, Including Removal Of Mortar Etc., Disposal Of Unserviceable Material To The Dumping Ground And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In- Charge. 15.54 Demolishing Dry Brick Pitching In Floors, Drains Etc. Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead : 15.55 Demolishing Mud Phaska In Terracing And Disposal Of Material Within 50 Metres Lead. 15.56 Dismantling Jack Arch Roofing And Floors Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 15.57 Demolishing R.B. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In- Charge. 15.58 Dismantling Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In- Charge : 15.58.1 Water Bound Macadam Road 15.58.2 Bituminous Road 15.59 Dismantling Steel Cylinder R.C. Pipes Including Excavation And Refilling Trenches After Taking Out The Pipes, Manually / By Mechanical Means Breaking Lead Caulked Joints, Melting Of Lead And Making Into Blocks Including Stacking Of Pipes & Lead At Site Within 50 Metres Lead As Per Direction Of Engineer-In-Charge : 15.59.1 Up To 600 Mm Diameter 15.59.2 Above 600 Mm Diameter 15.60 Dismantling Asbestos Cement Pressure Pipes Including Excavation And Refilling Trenches After Taking Out The Pipes Manually / By Mechanical Means And Stacking The Pipes Within 50 Metres Lead As Per Direction Of Engineer-In-Charge 15.60.1 Up To 150 Mm Diameter 15.60.2 Above 150 Mm Diameter 15.61 Dismantling Of R.C.C. Spun Vent Shaft Including Excavating The Cement Concrete Pit Completely, Taking Out The Shaft, Refilling The Excavated Gap, Stacking The Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead. 15.62 Dismantling Of Cement Concrete Platform Along With Curtain Walls And Base Concrete Etc. Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead: 15.62.1 120 X 120 Cm ( Outside To Outside ) 15.62.2 210 X 120 Cm ( Outside To Outside ) 15.63 Dismantling Of Flexible Pavement ( Bituminous Courses ) By Mechanical Means And Disposal Of Dismantled Material Up To A Lead Of 1 Kilometre, As Per Direction Of Engineer-In- Charge. 15.64 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. 17.1 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100Mm Sand Cast Iron P Or S Trap, Upvc P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required : 17.1.1 White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440mm With Integral Type Foot Rests. 17.1.2 Stainless Steel Aisi-304 ( 18 / 8 ) Orissa Pattern W.C. Pan Of Size 585X480 Mm With Flush Pipe And Integrated Type Foot Rests. 17.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required : 17.2.1 W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 17.2.2 W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid 17.2.3 Providing And Fixing Aisi-304 ( 18 / 8 ) European Type Wc Instead Of White Vitreous China Pedestal Type Water Closet. 17.3 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type ) With Seat And Lid, 10 Litre Low Level White Vitreous China Flushing Cistern And C.P. Flush Bend With Fittings And C.I.Brackets, 40Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required : 17.3.1 W.C. Pan With Isi Marked White Solid Plastic Seat And Lid. 17.3.2 W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid. 17.4 Providing And Fixing Vitreous China Dual Purpose Closet Suitable For Use As Squatting Pan Or European Type Water Closet ( Anglo Indian W.C Pan ) With Seat And Lid Fixed With C.P. Brass Hinges And Rubber Buffers, 10 Litre Low Level Flushing Cistern With Fitting And Brackets, 40Mm Flush Bend, 20Mm Over Flow Pipe, With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required White Vitreous China Dual Purpose Wc Pan With White Solid Plastic Seat And Lid With 10 Liter Low Level Flushing Cistern I / C C.P. Flush Bend. 17.5 Providing And Fixing White Vitreous China Extended Wall Mounting Water Closet Of Size 780X370x690 Mm Of Approved Shape Including Providing And Fixing White Vitreous China Cistern With Dual Flush Fitting, Of Flushing Capacity 3 Litre / 6 Litre ( Adjustable To 4 Litre / 8 Litres ) , Including Seat Cover, And Cistern Fittings, Nuts, Bolts And Gasket Etc Complete. 17.6 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260x350mm And 340X410x265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required : 17.6.1 One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern. 17.6.2 Range Of Two Urinal Basins With 5 Litre White P.V.C. Automatic Flushing Cistern. 17.6.3 Range Of Three Urinal Basins With 10 Litre White P.V.C. Automatic Flushing Cistern. 17.6.4 Range Of Four Urinal Basins With 10 Litre White P.V.C. Automatic Flushing Cistern. 17.7 Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pipe, Spreaders With Unions And Clamps ( All In C.P. Brass ) With Waste Fitting As Per Is : 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Wherever Require 17.7.1 Single Half Stall Urinal With 5 Litre P.V.C. Automatic Flushing Cistern. 17.7.2 Range Of Two Half Stall Urinals With 5 Litre P.V.C. Automatic Flushing Cistern. 17.7.3 Range Of Three Half Stall Urinals With 10 Litre P.V.C. Automatic Flushing Cistern. 17.7.4 Range Of Four Half Stall Urinals With 10 Litre P.V.C. Automatic Flushing Cistern. 17.8 Providing And Fixing One Piece Construction White Vitreous China Squatting Plate With An Integral Longitudinal Flushing Pipe, White P.V.C. Automatic Flushing Cistern, With Fittings, Standard Size G.I. / Pvc Flush Pipe For Back And Front Flush With Standard Spreader Pipes With Fittings, G.I Clamps And C.P. Brass Coupling Complete Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Etc. Wherever Required : 17.8.1 Single Squatting Plate With 5 Litre P.V.C. Automatic Flushing Cistern. 17.8.2 Range Of Two Squatting Plates With 5 Litre P.V.C. Automatic Flushing Cistern. 17.8.3 Range Of Three Squatting Plates With 10 Litre P.V.C. Automatic Flushing Cistern. 17.8.4 Range Of Four Squatting Plates With 10 Litre P.V.C. Automatic Flushing Cistern. 17.9 Providing And Fixing White Vitreous China Water Less Urinal Of Size 600X330x315 Mm Having Antibacterial / Germs Free Ceramic Surface, Fixed With Cartridge Having Debris Catcher And Hygiene Seal. 17.10 Providing And Fixing White Vitreous China Battery Based Infrared Sensor Operated Urinal Of Approx. Size 610 X 390 X 370 Mm Having Pre And Post Flushing With Water ( 250 Ml And 500 Ml Consumption ) , Having Water Inlet From Back Side, Including Fixing To Wall With Suitable Brackets All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. 17.11 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require : 17.11.1 White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps. 17.11.2 White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Tap. 17.11.3 White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps. 17.11.4 White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.11.5 White Vitreous China Angle Back Wash Basin Size 600X480 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.11.6 White Vitreous China Angle Back Wash Basin Size 400X400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.11.7 White Vitreous China Flat Back Wash Basin Size 450X300 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.11.8 White Vitreous China Surgeon Type Wash Basin Of Size 660X460 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps With Elbow Operated Lever Isi Marked. 17.11.9 White Vitreous China Surgeon Type Wash Basin Of Size 660X460 Mm With Single 15 Mm C.P. Brass Pillar Taps With Elbow Operated Levers Isi Marked. 17.11.10 Oval Shape Wash Basin Over Counter / Under Counter With 15 Mm C.P Brass Pillar Tap ( Counter To Be Paid Sepratly ) . 17.11.11 Stainless Steel Aisi-304 ( 18 / 8 ) Round Basin 405X355 Mm With Single 15 Mm C.P. Brass Pillar Tap 17.11.12 Stainless Steel Aisi-304 ( 18 / 8 ) Wash Basin 530X345 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.12 Providing And Fixing White Vitreous China Pedestal For Wash Basin Completely Recessed At The Back For The Reception Of Pipes And Fittings. 17.13 Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : White Glazed Fire Clay Kitchen Sink Of Size 600X450x250 Mm. 17.14 Providing And Fixing Stainless Steel A Isi 304 ( 18 / 8 ) Kitchen Sink As Per Is 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : 17.14.1 Kitchen Sink With Drain Board 17.14.1.1 510X1040 Mm Bowl Depth 250Mm. 17.14.1.2 510X1040 Mm Bowl Depth 225Mm. 17.14.1.3 510X1040 Mm Bowl Depth 200Mm. 17.14.1.4 510X1040 Mm Bowl Depth 178Mm. 17.14.2 Kitchen Sink Without Drain Board 17.14.2.1 610X510 Mm Bowl Depth 200 Mm. 17.14.2.2 610X460 Mm Bowl Depth 200 Mm. 17.14.2.3 470X420 Mm Bowl Depth 178 Mm. 17.15 Providing And Fixing White Vitreous China Laboratory Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug 40Mm C.P Brass Waste And 40Mm C.P. Brass Trap With Necessary C.P. Brass Unions Complete Including Painting Of Fittings And Brackets, Cutting And Making Good The Wall Wherever Required : 17.15.1 Size450x300x150mm 17.15.2 Size600x450x200mm 17.16 Providing And Fixing White Glazed Fire Clay Draining Board Of Size 600X450x25mm With C.I. Brackets Including Painting Of Brackets, Cutting And Making Good The Walls Wherever Required. 17.17 Providing And Fixing White Vitreous China Water Closet Squatting Pan ( Indian Type ) 17.17.1 Long Pattern W.C. Pan Of Size 580 Mm 17.17.2 Orissa Pattern W.C. Pan Of Size 580X440 Mm 17.18 Extra For Using Coloured W.C. Pan Instead Of White W.C. Pan Orissa Pattern W.C. Pan 580X440 Mm 17.19 Providing And Fixing White Vitreous China Pedestal Type ( European Type / Wash Down Type ) Water Closet Pan. 17.20 Extra For Using Coloured Pedestal Type W.C Pan ( European Type ) With Low Level Cistern Of Same Colour Instead Of White Vitreous China W.C Pan And Cistern. 17.21 Providing And Fixing A Pair Of White Vitreous China Foot Rests Of Standard Pattern For Squatting Pan Water Closet: 17.21.1 250X130x30 Mm 17.21.2 250X125x25 Mm 17.22 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Conforming To Is: 7231, With All Fittings And Fixtures Complete. 10 Litre Capacity 17.22.1 White 17.22.2 Coloured 17.23 Providing And Fixing Controlled Flush, Low Level Cistern Made Of Vitreous China With All Fittings Complete.10 Litre ( Full Flush Capacity ) 17.23.1 White 17.23.2 Coloured 17.24 Providing And Fixing Solid Plastic Seat With Lid For Pedestal Type W.C. Pan Complete : 17.24.1 White 17.24.2 Black 17.24.3 Coloured ( Other Than Black And White ) 17.25 Providing And Fixing G.I. Inlet Connection For Flush Pipe Connecting With W.C. Pan. 17.26 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260x350mm Or 340X410x265mm Sizes Respectively. 17.27 Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm. 17.28 Providing And Fixing White Vitreous China Squatting Plate Urinal With Integral Rim Longitudinal Flush Pipe. 17.29 Providing And Fixing White Vitreous China Wash Basin Including Making All Connections But Excluding The Cost Of Fittings : 17.29.1 Flat Back Wash Basin Of Size 630X450mm. 17.29.2 Flat Back Wash Basin Of Size 550X400mm. 17.29.3 Angle Back Wash Basin Of Size 600X480mm. 17.29.4 Angle Back Wash Basin Of Size 400X400mm. 17.29.5 Flat Back Wash Basin Of Size 450X300mm. 17.29.6 Surgeon Type Wash Basin Of Size 660X460mm. 17.30 Providing And Fixing Kitchen Sink Including Making All Connections Excluding Cost Of Fittings. White Glazed Fire Clay Sink Of Size 600X450x250mm. 17.31 Providing And Fixing White Vitreous China Laboratory Sink Including Making All Connections Excluding Cost Of Fittings: 17.31.1 Size 450X300x150 Mm. 17.31.2 Size 600X450x200 Mm. 17.32 Providing And Fixing Soil, Waste And Vent Pipes: 17.32.1 Sand Cast Iron Socket And Spigot ( S&S ) Pipe As Per Is: 1729 17.32.1.1 75 Mm Dia With Wall Thickness Of 5 Mm 17.32.1.2 100 Mm Dia With Wall Thickness Of 5 Mm 17.32.2 Spun Cast Iron Socket And Spigot ( S&S ) Pipe As Per Is: 3989 17.32.2.1 75 Mm Dia With Wall Thickness Of 3.5 Mm 17.32.2.2 100 Mm Dia With Wall Thickness Of 4 Mm 17.32.2.3 150Mm Dia With Wall Thickness Of 5Mm 17.32.3 Hubless Centrifugally Cast ( Spun ) Iron Pipe Epoxy Coated In Side & Out Side Including Complete Coupling Assembly ( Epdm Rubber Gasket Stainless Steel Claim And External Metallic / Protective Shield As Per Is:15905 ) 17.32.3.1 75 Mm Dia With Wall Thickness Of 3.5 Mm 17.32.3.2 100 Mm Dia With Wall Thickness Of 3.5Mm 17.32.3.3 150Mm Dia With Wall Thickness Of 4 Mm 17.33 Providing And Filling The Joints With Spun Yarn Cement Slurry And Cement Mortar 1:2 ( 1 Cement : 2 Sand ) In S.C.I. / C.I. Pipes : 17.33.1 75 Mm Dia Pipe 17.33.2 100 Mm Dia Pipe 17.34 Providing And Fixing M.S. Holder-Bat Clamps Of Approved Design To Sand Cast Iron / Cast Iron ( Spun ) Pipe Embedded In And Including Cement Concrete Blocks 10X10x10cm Of Cement Concrete 1:2:4 Mix ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) Including Cost Of Cutting Holes And Making Good The Walls Etc. : 17.34.1 For 75 Mm Dia Pipe 17.34.2 For 100 Mm Dia Pipe 17.34.3 For 150 Mm Dia Pipe 17.35 Providing And Fixing Bend Of Required Degree With Access Door, Insertion Rubber Washer 3 Mm Thick, Bolts And Nuts Complete. 17.35.1 150 Mm Dia 17.35.1.1 Sand Cast Iron As Per Is – 1729 Minimum Wall Thickness 6.5Mm 17.35.1.2 Spun Cast Iron As Per Is – 3989 Minimum Wall Thickness 5 Mm 17.35.1.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 Minimum Wall Thickness 3.5 Mm 17.35.2 100 Mm Dia 17.35.2.1 Sand Cast Iron As Per Is – 1729 Minimum Wall Thickness 6.5Mm 17.35.2.2 Spun Cast Iron As Per Is – 3989 Minimum Wall Thickness 4 Mm 17.35.2.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 Minimum Wall Thickness 3 Mm 17.35.3 75 Mm Dia 17.35.3.1 Sand Cast Iron As Per Is – 1729 Minimum Wall Thickness 6.5 Mm 17.35.3.2 Spun Cast Iron As Per Is – 3989 Minimum Wall Thickness 3.5 Mm 17.35.3.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 Minimum Wall Thickness 3 Mm 17.36 Providing And Fixing Plain Bend Of Required Degree. 17.36.1 150 Mm Dia 17.36.1.1 Sand Cast Iron As Per Is – 1729 Minimum Wall Thickness 6.5Mm 17.36.1.2 Spun Cast Iron As Per Is – 3989 Minimum Wall Thickness 5 Mm 17.36.1.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 Minimum Wall Thickness 3.5 Mm 17.36.2 100 Mm Dia 17.36.2.1 Sand Cast Iron As Per Is – 1729 Minimum Wall Thickness 6.5Mm 17.36.2.2 Spun Cast Iron As Per Is – 3989 Minimum Wall Thickness 4 Mm 17.36.2.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 Minimum Wall Thickness 3 Mm 17.36.3 75 Mm Dia 17.36.3.1 Sand Cast Iron As Per Is – 1729 Minimum Wall Thickness 6.5Mm 17.36.3.2 Spun Cast Iron As Per Is – 3989 Minimum Wall Thickness 3.5 Mm 17.36.3.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 Minimum Wall Thickness 3 Mm 17.37 Providing And Fixing Heel Rest Sanitary Bend 17.37.1 100 Mm Dia 17.37.1.1 Sand Cast Iron As Per Is - 1729 17.37.1.2 Spun Cast Iron As Per Is - 3989 17.37.2 75 Mm Dia 17.37.2.1 Sand Cast Iron As Per Is - 1729 17.37.2.2 Spun Cast Iron As Per Is - 3989 17.38 Providing And Fixing Double Equal Junction Of Required Degree With Access Door, Insertion Rubber Washer 3 Mm Thick, Bolts And Nuts Complete : 17.38.1.1 150X150x150x150 17.38.1.2 Sand Cast Iron As Per Is - 3989 17.38.2 100X100x100x100mm 17.38.2.1 Sand Cast Iron As Per Is - 1729 17.38.2.2 Spun Cast Iron As Per Is - 3989 17.38.3 75X75x75x75mm 17.38.3.1 Sand Cast Iron As Per Is - 1729 17.38.3.2 Spun Cast Iron As Per Is - 3989 17.39 Providing And Fixing Double Equal Plain Junction Of Required Degree. 17.39.1 150X150x150x150 Mm 17.39.1.1 Sand Cast Iron As Per Is - 3989 17.39.2 100X100x100x100mm 17.39.2.1 Sand Cast Iron As Per Is – 1729 17.39.2.2 Spun Cast Iron As Per Is – 3989 17.39.2.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.39.3 75X75x75x75 Mm 17.39.3.1 Sand Cast Iron As Per Is – 1729 17.39.3.2 Spun Cast Iron As Per Is – 3989 17.39.3.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.40 Providing And Fixing Single Equal Junction Of Required Degree With Access Door, Insertion Rubber Washer 3 Mm Thick, Bolts And Nuts Complete. 17.40.1 150X150x150 Mm 17.40.1.1 Spun Cast Iron As Per Is - 3989 17.40.2 100X100x100 Mm 17.40.2.1 Sand Cast Iron As Per Is - 1729 17.40.2.2 Spun Cast Iron As Per Is - 3989 17.40.3 75X75x75 Mm 17.40.3.1 Sand Cast Iron As Per Is - 1729 17.40.3.2 Spun Cast Iron As Per Is - 3989 17.41 Providing And Fixing Single Equal Plain Junction Of Required Degree : 17.41.1 150X150x150 Mm 17.41.1.1 Spun Cast Iron As Per Is - 3989 17.41.2 100X100x100 Mm 17.41.2.1 Sand Cast Iron As Per Is – 1729 17.41.2.2 Spun Cast Iron As Per Is – 3989 17.41.2.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.41.3 75X75x75 Mm 17.41.3.1 Sand Cast Iron As Per Is – 1729 17.41.3.2 Spun Cast Iron As Per Is – 3989 17.41.3.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.42 Providing And Fixing Double Unequal Junction Of Required Degree With Access Door, Insertion Rubber Washer 3 Mm Thick, Bolts And Nuts Complete :100X100x75x75 Mm 17.42.1 Sand Cast Iron As Per Is - 1729 17.42.2 Spun Cast Iron As Per Is - 3989 17.43 Providing And Fixing Double Unequal Plain Junction Of Required Degree: 100X100x75x75 Mm 17.43.1.1 Sand Cast Iron As Per Is – 1729 17.43.1.2 Spun Cast Iron As Per Is – 3989 17.43.1.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.44 Providing And Fixing Single Unequal Junction Of Required Degree With Access Door, Insertion Rubber Washer 3 Mm Thick, Bolts And Nuts Complete : 100X100x75 Mm 17.44.1 Sand Cast Iron As Per Is - 1729 17.44.2 Spun Cast Iron As Per Is - 3989 17.45 Providing And Fixing Single Unequal Plain Junction Of Required Degree : 100X100x75 Mm 17.45.1 Sand Cast Iron As Per Is – 1729 17.45.2 Spun Cast Iron As Per Is – 3989 17.45.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.46 Providing And Fixing Double Equal Plain Invert Branch Of Required Degree: 17.46.1 100X100x100x100 Mm 17.46.1.1 Sand Cast Iron As Per Is - 1729 17.46.1.2 Sand Cast Iron As Per Is - 3989 17.46.1.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.46.2 75X75x75x75 Mm 17.46.2.1 Sand Cast Iron As Per Is - 1729 17.46.2.2 Spun Cast Iron As Per Is - 3989 17.47 Providing And Fixing Single Equal Plain Invert Branch Of Required Degree: 17.47.1 100X100x100 Mm 17.47.1.1 Sand Cast Iron As Per Is - 1729 17.47.1.2 Sand Cast Iron As Per Is - 3989 17.47.1.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.47.2 75X75x75 Mm 17.47.2.1 Sand Cast Iron As Per Is - 1729 17.47.2.2 Sand Cast Iron As Per Is - 3989 17.47.2.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.48 Providing And Fixing Double Unequal Invert Branch Of Required Degree : 100X100x75x75 Mm 17.48.1 Sand Cast Iron As Per Is - 1729 17.48.2 Spun Cast Iron As Per Is - 3989 17.49 Providing And Fixing Single Unequal Plain Invert Branch Of Required Degree : 100X100x75 Mm 17.49.1 Sand Cast Iron As Per Is - 1729 17.49.2 Spun Cast Iron As Per Is - 3989 17.49.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 Minimum Wall Thickness 17.50 Providing And Fixing Sand Cast Iron S&S Off Sets As Per Is: 1729 17.50.1 76 Mm Off Sets 17.50.1.1 With 75 Mm Dia Pipe 17.50.1.2 With 100 Mm Dia Pipe 17.50.2 114 Mm Off Sets 17.50.2.1 With 75 Mm Dia Pipe 17.50.2.2 With 100 Mm Dia Pipe 17.50.3 152 Mm Off Sets 17.50.3.1 With 75 Mm Dia Pipe 17.50.3.2 With 100 Mm Dia Pipe 17.51 Providing And Fixing Sand Cast Iron S&S Off Sets As Per Is: 3989. 17.51.1 75 Mm Off Sets 17.51.1.1 With 75 Mm Dia Pipe 17.51.1.2 With 100 Mm Dia Pipe 17.51.1.3 With 150 Mm Dia Pipe 17.51.2 150 Mm Off Sets 17.51.2.1 With 75 Mm Dia Pipe 17.51.2.2 With 100 Mm Dia Pipe 17.51.2.3 With 150 Mm Dia Pipe 17.52 Providing And Fixing Door Piece, Insertion Rubber Washer 3Mm Thick, Bolts And Nuts Complete : 17.52.1 100 Mm 17.52.1.1 Sand Cast Iron As Per Is - 1729 17.52.1.2 Spun Cast Iron As Per Is - 3989 17.52.2 75 Mm 17.52.2.1 Sand Cast Iron As Per Is - 1729 17.52.2.2 Spun Cast Iron As Per Is - 3989 17.53 Providing And Fixing Terminal Guard: 17.53.1 150Mm 17.53.1.1 Sand Cast Iron As Per Is - 1729 17.53.1.2 Spun Cast Iron As Per Is - 3989 17.53.1.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.53.2 100 Mm 17.53.2.1 Sand Cast Iron As Per Is - 1729 17.53.2.2 Spun Cast Iron As Per Is - 3989 17.35.2.3 Hubless Cast ( Spun ) Iron As Per Is-15905 17.53.3 75 Mm 17.53.3.1 Sand Cast Iron As Per Is - 1729 17.53.3.2 Spun Cast Iron As Per Is - 3989 17.53.3.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.54 Providing And Fixing Collar: 17.54.1 100 Mm 17.54.1.1 Sand Cast Iron S & S As Per Is - 1729 17.54.1.2 Sand Cast Iron S & S As Per Is - 3989 17.54.2 75 Mm 17.54.2.1 Sand Cast Iron S & S As Per Is - 1729 17.54.2.2 Sand Cast Iron S & S As Per Is- 3989 17.55 Providing Lead Caulked Joints To Sand Cast Iron / Centrifugally Cast ( Spun ) Iron Pipes And Fittings Of Diameter: 17.55.1 150Mm 17.55.2 100 Mm 17.55.3 75 Mm 17.56 Providing And Fixing M.S. Stays And Clamps For Sand Cast Iron / Centrifugally Cast ( Spun ) Iron Pipes Of Diameter : 17.56.1 100 Mm Dia 17.56.2 75 Mm Dia 17.57 Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors : 17.57.1 100 Mm Inlet And 100 Mm Outlet 17.57.1.1 Spun Cast Iron S & S As Per Is: 3989. 17.57.1.2 Sand Cast Iron S & S As Per Is: 1729. 17.57.1.3 Hubless Cast ( Spun ) Iron As Per Is-15905 17.57.2 100 Mm Inlet And 75 Mm Outlet 17.57.2.1 Sand Cast Iron S & S As Per Is - 3989 17.57.2.2 Spun Cast Iron S & S As Per Is- 1729. 17.57.2.3 Hubless Cast ( Spun ) Iron As Per Is- 15905 17.58 Providing And Fixing Unplasticised Rigid Pvc Soil And Waste Pipes Conforming To Is: 13592 Type B Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion. Single Socketed Pipes For Working Pressure Of 4 Kg / Sqcm. ( Minimum Wall Thickness 3.2Mm ) 17.58.1 75 Mm Diameter 17.58.2 110 Mm Diameter 17.59 Providing And Fixing Unplasticised Pvc Moulded Fittings / Accessories For Unplasticised Rigid Pvc Soil And Waste Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion. 17.59.1 Coupler 17.59.1.1 75 Mm 17.59.1.2 110 Mm 17.59.2 Single Pushfit Coupler 17.59.2.1 75 Mm 17.59.2.2 110 Mm 17.59.3 Single Tee With Door 17.59.3.1 75X75x75 Mm 17.59.3.2 110X110x110 Mm 17.59.4 Single Tee Without Door 17.59.4.1 75X75x75 Mm 17.59.4.2 110X110x110 Mm 17.59.5 Bend 87.50 17.59.5.1 75 Mm Bend 17.59.5.2 110 Mm Bend 17.60 Providing And Fixing Unplasticised - Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Soil And Waste Pipes By Means Of Bombay Nail Of Required Length Including And Making Good The Wall Etc. Complete. 17.60.1 75 Mm 17.60.2 110 Mm 17.61 Providing And Fixing Upvc Trap Of Self Cleaning Design Complete. Including Cost Of Cutting And Making Good The Wall And Floors. 100 Mm Inlet And 75 Mm Outlet 17.62 Providing And Fixing M.S. Holder Bat Clamp Of Approved Design To Sand Cast Iron / Cast Iron ( Spun ) Pipes Comprising Of M.S. Flat Brackets Made Of 50X5mm Flat Of Specified Shape, Projecting 75Mm Outside The Wall Surface And Fixed On Wall With 4Nos, 6Mm Dia Expansion Hold Fasteners Including Drilling Necessary Holes In Brick Wall / Cc / Rcc Surface And The Cost Of Bolts Etc. The Pipes Shall Be Fixed To The Already Fixed Brackets With The Help Of 30Mm X1.6Mm Galvanised M.S. Flats Of Specified Shape And Of Total Length 420Mm And Shall Be Fixed With M.S. Nuts, Bolts, And Washers Of Size 25X6mm, One Bolts On Each Side Of The Pipe. 17.62.1 Total Bracket Length 580Mm Of Approved Shape And Design ( For Single, 100Mm Dia Pipe ) . 17.62.2 Total Bracket Length 810Mm Of Approved Shape And Design ( For Two, 100Mm Dia Pipes ) . 17.62.3 Total Bracket Length 1040Mm Of Approved Shape And Design ( For Three, 100Mm Dia Pipes ) . 17.63 Cutting Chases In Brick Masonry Walls ( Clay Brick / Flyash Brick / Aac Blocks ) For Following Diameter Sand Cast Iron / Centrifugally Cast ( Spun ) Iron Pipes And Making Good The Same With Cement Concrete 1:3:6 ( 1 Cement : 3 Sand :6 Graded Stone Aggregate 12.5 Mm Nominal Size ) Including Necessary Plaster And Pointing In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) : 17.63.1 100 Mm Dia 17.63.2 75 Mm Dia 17.63.3 50 Mm Dia 17.64 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. 17.64.1 Semi Rigid Pipe 17.64.1.1 32 Mm Dia 17.64.1.2 40 Mm Dia 17.64.2 Flexible Pipe ( Only In Residential & Complaxes ) 17.64.2.1 32 Mm Dia 17.64.2.2 40 Mm Dia 17.65 Providing And Fixing 100 Mm Sand Cast Iron Grating For Gully Trap. 17.66 Providing And Fixing In Position 25Mm Diameter Mosquito Proof Coupling Of Approved Municipal Design. 17.67 Providing And Fixing Bevelled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 17.68 Providing And Fixing Mirror Of Superior Glass ( Of Approved Quality ) And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shape With 6 Mm Thick Hard Board Backing 17.68.1 Circular Shape 450Mm Dia. 17.68.2 Rectangular Shape 453X357mm 17.68.3 Oval Shape 450X350mm ( Outer Dimensions ) 17.68.4 Rectangular Shape 1500X450 Mm 17.69 Providing And Fixing Glass Shelf With Edges Round Of Supported On Anodised Aluminium Angle Frame With C.P. Brass Brackets And Guard Rail Complete Fixed With 40 Mm Long Screws, Rawl Plugs Etc., Complete. 17.70 Providing And Fixing Toilet Paper Holder: 17.70.1 C.P. Brass 17.70.2 Vitreous China 17.71 Providing And Fixing Cp Brass Waste Coupling Of Approved Quality And Make For Sink And Wash Basin. 17.71.1 Waste Coupling 31Mm Of 79Mm Length And 62Mm Breadth 17.71.2 Waste Coupling 38Mm Of 83Mm Length And 77Mm Breadth 17.72 Providing And Fixing Cp Brass Bottle Trap Of Approved Quality And Make For Sink And Wash Basin. 17.73 Providing And Fixing Cp Brass Towel Rail Of Approved Quality And Make 17.73.1 600X20mm 17.73.2 450X20mm 17.74 Providing And Fixing Cp Brass Towel Ring Of Approved Quality And Make 200Mm Dia Ring 17.75 Providing And Fixing Cp Brass Soap Dish Of Approved Quality And Make 17.76 Providing And Fixing Cp Brass Urinal Spreader Of Approved Quality And Make 17.77 Providing And Fixing C.P. Brass Soap Container 109 Mm Wide, 125 High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Material With All Fittings Etc. Of Approved Quality And Conforming To Is: Specification. 17.78 Providing And Fixing C.P. Brass Grating Of Approved Quality And Make Conforming To Is: Specification. 17.78.1 100 Mm Dia. 17.79 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour. 17.79.1 Waste Coupling 31Mm Dia Of 79Mm Length And 62Mm Breadth Weighing Not Less Than 45Gms. 17.79.2 Waste Coupling 38Mm Dia Of 83Mm Length And 77Mm Breadth, Weighing Not Less Than 60Gms. 17.80 Providing And Fixing Ptmt Bottle Trap For Wash Basin And Sink. 17.80.1 Bottle Trap 31Mm Single Piece Moulded With Height Of 270Mm, Effective Length Of Tail Pipe 260Mm From The Centre Of The Waste Coupling 77Mm Breadth With 25Mm Minimum Water Seal, Weighing Not Less Than 260Gms. 17.80.2 Bottle Trap 38Mm Single Piece Moulded With Height Of 270Mm, Effective Length Of Tail Pipe 260Mm From The Centre Of The Waste Coupling 77Mm Breadth With 25Mm Minimum Water Seal, Weighting Not Less Than 263Gms. 17.81 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 17.82 Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215Mm Long, 200Mm Wide With A Minimum Distances Of 37Mm From Wall Face With Concealed Fittings Arrangement Of Approved Quality And Colour. Weighing Not Less Than 88 Gms. 17.83 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 17.83.1 450Mm Long Towel Rail With Total Length Of 495Mm, 78Mm Wide And Effective Height Of 88Mm, Weighing Not Less Than 170Gms. 17.83.2 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 17.84 Providing And Fixing Ptmt Shelf 440 Mm Long, 124 Mm Width And 36 Mm Height Of Approved Quality And Colour. Weighing Not Less Than 300 Gms. 17.85 Providing And Fixing Ptmt 15 Mm Urinal Spreader Size 95X69x100 Mm With 1 / 2 Bsp Thread And Shapes. Weighing Not Less Than 60 Gms. 17.86 Providing And Fixing Ptmt Urinal Cock Of Approved Quality And Colour. 15 Mm Nominal Bore, 80Mm Long. 42 Mm High And 30Mm Wide With Bsp Female Threads Weighing Not Less Than 48 Gms. 17.87 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements. Weighing Not Less Than 106 Gms. 17.88 Painting C.I. Cistern With Bitumastic Or Any Other Anti-Corrosive Paint Inside And White Paint Over A Coat Of Zinc Chromate Yellow Primer ( Of Approved Quality ) On The Outside Surface Of The Cistern, Flush Pipe, Other Fittings, Etc. Complete For New Work. 17.89 Re-Painting C.I. Cistern With Bitumastic Or Any Other Anti-Corrosive Paint Inside And White Paint On The Outside Surface Of The Cistern, Flush Pipe, Other Fittings, Etc. Complete Including Polishing Of Wooden Seat And Lid And Cleaning Of W.C. Pan With Acid Wherever Necessary. 17.90 Repainting C.I. Cistern With Synthetic Enamel Paint Of Approved Colour Brand And Manufacture On The Outside Surface Of Cistern Flush Pipe, Other Fittings Etc. Complete. 17.91 Painting Sand Cast Iron / Centrifugally Cast ( Spun ) Iron Soil, Waste Vent Pipes And Fittings With Two Coats Of Synthetic Enamel Paint Of Any Colour Such As Chocolate Grey, Or Buff Etc. Over A Coat Of Primer ( Of Approved Quality ) For New Work : 17.91.1 75 Mm Diameter Pipe 17.91.2 100 Mm Diameter Pipe 17.91.3 150 Mm Diameter Pipe 17.92 Repainting Sand Cast Iron / Centrifugally Cast Iron ( Spun ) Iron, Soil, Waste, Vent Pipes And Fittings With One Coat Of Synthetic Enamel Paint Of Any Colour Such As Chocolate, Grey Or Buff Etc : 17.92.1 75 Mm Diameter Pipe 17.92.2 100 Mm Diameter Pipe 17.92.3 150 Mm Diameter Pipe 17.93 Repainting Bath Tub Of Size 1700X730x430mm With Enamel Paint. 17.94 Providing And Laying Ceramic Glazed Half Round Pipe Drain ( Having Thickness 9 To 10Mm ) Of Approved Make In Colours Such As White, Ivory, Grey, Or Any Other Colour, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 17.94.1 100 Mm Dia Half Round Pipe 17.94.2 150 Mm Dia Half Round Pipe 17.94.3 200Mm Dia Half Round Pipe 17.95 Construction Of Manually Operated Fire Based Incinerator For Girls-Toilet I / C ( I )    Fire And Ash Collection Chamber 0.60X0.60 M, Made Of Calcium Silicate Bricks, Having 12Mm Dia Steel Bars Grating @10 Cm C / C, I / C Ms Mesh Weldedon Top Including 300 Mm X 450 Mm Ms Openable Door Of Half Grill And Half Ms Plate ( 3Mm Thick ) . ( Ii )      0.40 M X 0.40 M Duct Made Of 1.6 Mm Thick Ms Sheet For Dropping Napkins From The Toilet Opening. ( Iv ) 150Mm Dia Class C Heavy Duty Ms Pipe Conforming To Is 3589 / 1239 For Gas Emission With Cowel, Up To 2.10 Meter Height Above Terrace Level. ( V ) Opening In Wall Having Ms Flap ( 1.6Mm Thick ) Of Size 0.25X 0.25 M, Finished With Granite.Etc Complete As Per Standard Drawing No. 5313-B-Nb4-9919- R1 Dated 21.02.2017 17.95.1 For Ground Floor Buildings. 17.95.2 For Ground Floor & Ist Floor Buildings. 17.95.3 Add Extra For Every Additional Floor Above Ist Floor. 17.96 Providing And Installing Bio Digester Unit Based On Drdo Technology Made Of Fiber Reinforced Plastic Having Composition And The Technical Specifications Such As:Parentage Of Fiber Glass ( Glass Content In Fiber Glass Should Be Minimum 30% ) :- 33.33% Water Absorption ( As Per Astm ) : - 0.30% Flammability :- As Per Astm Tensile Strength :-115 Mpa Specific Gravity At 25 Degree Centigrade :-1.45 Izod Impact Strength :- 65 Kj / M2 Heat Defection / Distort Temperature :- 65 Deg C Corrosion Resistance ( Non Corrosive ) Fitted With Inlet Pipe Size Rigid Pvc :-100Mm Outlet Pipe Size Rigid Pvc :-80Mm Gas Outlet Rigid Pvc With Valve :- 20Mm Bacteria Immobilization Pvc Matrix ( On All Partition ) And Capacity :- 17.96.1 Upto 10 User Size ( 1.0M X 1.0M X 0.70M ) Capacity Of Bio-Digester :- 700 Liters Area Of Top, Bottom And Side Walls 4.80 Sq.M Area Of Partition Walls : 1.40 Sq.M Total Weight Of Frp: 33.48 Kg Bacteria Inoculums Quantity:- 200 Liters Minimum Thickness Of Side Walls / Top And Bottom:- 3Mm Number Of Inside Partitions :- 2 Minimum Thickness Of Partition Wall :- 3Mm 17.96.2 Upto 15 User Size ( 1.0M X 1.0M X 0.10M ) Capacity Of Bio-Digester :- 1000 Liters Area Of Top, Bottom And Side Walls 6.00 Sq.M. Area Of Partition Walls : 2.00 Sq.M Total Weight Of Frp: 54.00 Kg Bacteria Inoculums Quantity:- 400 Liters Minimum Thickness Of Side Walls / Top And Bottom :- 4Mm Number Of Inside Partitions :- 2 Minimum Thickness Of Partition Wall :- 3Mm 17.96.3 Upto 25 User Size ( 1.5M X 1.0M X 1.0M ) Capacity Of Bio-Digester :- 1500 Liters Area Of Top, Bottom And Side Walls 8.00 Sq.M.Area Of Partition Walls : 2.00 Sq.M Total Weight Of Frp: 82.80 Kg Bacteria Inoculums Quantity :- 400 Liters Minimum Thickness Of Side Walls / Top And Bottom :-5Mm Number Of Inside Partitions:- 2 Minimum Thickness Of Partition Wall:- 3Mm 17.96.4 Upto 40 User Size ( 2.0M X 1.0M X 1.0M ) Capacity Of Bio-Digester :- 2000 Liters Area Of Top, Bottom And Side Walls 10.00 Sq.M.Area Of Partition Walls : 3.00 Sq.M Total Weight Of Frp: 106.20 Kg Bacteria Inoculums Quantity :- 600 Liters Minimum Thickness Of Side Walls / Top And Bottom :- 5Mm Number Of Inside Partitions:- 3 Minimum Thickness Of Partition Wall :- 3Mm 17.96.5 Upto 60 User Size ( 2.4M X 1.25M X 1.0M ) Capacity Of Bio-Digester :- 3000 Liters Area Of Top, Bottom And Side Walls 13.30 Sq.M.Area Of Partition Walls : 3.75 Sq.M Total Weight Of Frp: 139.95 Kg Bacteria Inoculums Quantity :- 800Litres Minimum Thickness Of Side Walls / Top And Bottom :- 5Mm Number Of Inside Partitions :- 3 Minimum Thickness Of Partition Wall :- 3Mm 17.96.6 Upto 80 User Size ( 2.7M X 1.5M X 1.0M ) Capacity Of Bio-Digester :- 4000 Liters Area Of Top, Bottom And Side Walls 16.50Sq.M Area Of Partition Walls : 4.50 Sq.M Total Weight Of Frp: 202.50 Kg Bacteria Inoculums Quantity :- 1200Litres Minimum Thickness Of Side Walls / Top And Bottom :- 6Mm Number Of Inside Partitions :-4 Minimum Thickness Of Partition Wall:-3Mm 17.96.7 Upto 100 User Size ( 2.5M X 2.0M X 1.0M ) Capacity Of Bio-Digester :- 5000 Liters Area Of Top, Bottom And Side Walls:-19.00 Sq.M. Area Of Partition Walls :- 8.00 Sq.M Total Weight Of Frp:- 248.40 Kg Bacteria Inoculums Quantity :- 1400 Liters Minimum Thickness Of Side Walls / Top And Bottom :- 6Mm Number Of Inside Partitions :- 4 Minimum Thickness Of Partition Wall:-3Mm 17.96.8 Upto 150 User Size ( 3.2M X 2.0M X 1.25M ) Capacity Of Bio-Digester :- 8000 Liters Area Of Top, Bottom And Side Walls:-25.80 Sq.M.Area Of Partition Walls :- 10.00 Sq.M Total Weight Of Frp:- 397.08 Kg Bacteria Inoculums Quantity :- 2400 Liters Minimum Thickness Of Side Walls / Top And Bottom :- 7Mm Number Of Inside Partitions:- 4 Minimum Thickness Of Partition Wall:- 4Mm 17.96.9 Upto 200 User Size ( 4.0M X 2.0M X 1.25 M ) Capacity Of Bio-Digester :- 10, 000 Liters Area Of Top, Bottom And Side Walls:- 31.00 Sq.M.Area Of Partition Walls :- 10.00 Sq.M Total Weight Of Frp:- 462.60 Kg Bacteria Inoculums Quantity :- 3000 Liters Minimum Thickness Of Side Walls / Top And Bottom :- 7Mm Number Of Inside Partitions:- 4 Minimum Thickness Of Partition Wall :-4Mm 17.96.10 Upto 300 User Size ( 4.8M X 2.0M X 1.25 M ) Capacity Of Bio-Digester :- 12000 Liters Area Of Top, Bottom And Side Walls:-36.20 Sq.M.Area Of Partition Walls : - 10.00 Sq.M Total Weight Of Frp: - 593.28 Kg Bacteria Inoculums Quantity :- 3600 Liters Minimum Thickness Of Side Walls / Top And Bottom:- 8Mm Number Of Inside Partitions:-4 Minimum Thickness Of Partition Wall:-4Mm 17.96.11 Upto 400 User Size ( 5.0M X 2.0M X 1.5M ) Capacity Of Bio-Digester :- 15000 Liters Area Of Top, Bottom And Side Walls:- 41.00Sq.M.Area Of Partition Walls:- 12.00 Sq. M Total Weight Of Frp :- 676.80 Kg Bacteria Inoculums Quantity :- 4400 Liters Minimum Thickness Of Side Walls / Top And Bottom:- 8Mm Number Of Inside Partitions:- 4 Minimum Thickness Of Partition Wall:-4Mm 17.96.12 Upto 500 User Size ( 6.0M X 2.0M X 1.67M ) Capacity Of Bio-Digester :- 20, 000 Liters Area Of Top, Bottom And Side Walls:-50.72 Sq.M.Area Of Partition Walls:- 13.36 Sq.M. Total Weight Of Frp :- 917.86 Kg Bacteria Inoculums Quantity:- 6000 Liter Minimum Thickness Of Side Walls / Top And Bottom :- 9Mm Number Of Inside Partitions :- 4 Minimum Thickness Of Partition Wall:- 18.6 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings I / C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. 18.6.1 Internal Work - Exposed On Wall 18.6.1.1 15 Mm Nominal Outer Dia Pipes. 18.6.1.2 20 Mm Nominal Outer Dia .Pipes. 18.6.1.3 25 Mm Nominal Outer Dia .Pipes. 18.6.1.4 32 Mm Nominal Outer Dia Pipes. 18.6.1.5 40 Mm Nominal Outer Dia Pipes. 18.6.1.6 50 Mm Nominal Outer Dia .Pipes. 18.6.2 Concealed Work Including Cutting Chases And Making Good The Walls Etc. 18.6.2.1 15 Mm Nominal Outer Dia .Pipes. 18.6.2.2 20 Mm Nominal Outer Dia .Pipes. 18.6.2.3 25 Mm Nominal Outer Dia Pipes. 18.6.2.4 32 Mm Nominal Outer Dia Pipes. 18.7 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings. This Included Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling And Testing Of Joints Complete As Per Direction Of Engineer-In- Charge. External Work 18.7.1 15 Mm Nominal Outer Dia Pipes. 18.7.2 20 Mm Nominal Outer Dia .Pipes. 18.7.3 25 Mm Nominal Outer Dia Pipes. 18.7.4 32 Mm Nominal Outer Dia .Pipes. 18.7.5 40 Mm Nominal Outer Dia Pipes. 18.7.6 50 Mm Nominal Outer Dia .Pipes. 18.7.7 62.50 Mm Nominal Inner Dia Pipes. 18.7.8 75 Mm Nominal Inner Dia .Pipes. 18.7.9 100Mm Nominal Inner Dia .Pipes. 18.7.10 150 Mm Nominal Inner Dia Pipes. 18.8 Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc. 18.8.1 Internal Work - Exposed On Wall 18.8.1.1 15 Mm Dia. Nominal Bore 18.8.1.2 20 Mm Dia. Nominal Bore 18.8.1.3 25 Mm Dia. Nominal Bore 18.8.1.4 32 Mm Dia. Nominal Bore 18.8.1.5 40 Mm Dia. Nominal Bore 18.8.1.6 50 Mm Dia. Nominal Bore 18.8.2 Concealed Pipe Including Painting With Anti Corrosivebitumastic Paint, Cutting Chases And Making Good The Wall. 18.8.2.1 15 Mm Dia Nominal Bore 18.8.2.2 20 Mm Dia Nominal Bore 18.8.3 External Work : Including Trenching And Refilling Etc. 18.8.3.1 15 Mm Dia. Nominal Bore 18.8.3.2 20 Mm Dia. Nominal Bore 18.8.3.3 25 Mm Dia. Nominal Bore 18.8.3.4 32 Mm Dia. Nominal Bore 18.8.3.5 40 Mm Dia. Nominal Bore 18.8.3.6 50 Mm Dia. Nominal Bore 18.8.3.7 65 Mm Dia. Nominal Bore 18.8.3.8 80 Mm Dia. Nominal Bore 18.9 Providing And Fixing Stainless Steel Pipe And Fitting Of Grade Aisi 304 As Per Jis Standard 3448 Complete With Press Type Fitting ( Fitting Shall Be Paid For Separately ) I / C Fixing Of The Pipe With Clamps At 1.00 M Spacing Including Cutting And Making Good The Walls Including Testing Of Joints Complete As Per Direction Of Engineer -In-Charge. ( The Pipe Length Inserted In The Fitting Shall Not Be Measured For Payment ) 18.9.1 Internal Work - Exposed On Wall 18.9.1.1 15.88 Mm Outer Diapipe 18.9. 1.2 22.22 Mm Outer Diapipe 18.9.1.3 28.58 Mm Outer Diapipe 18.9.1.4 34.00 Mm Outer Dia Pipe 18.9.1.5 42.70 Mm Outer Dia Pipe 18.9.1.6 48.60 Mm Outer Dia Pipe 18.9.2 Internal Work - Concealed Pipe 18.9.2.1 15.88 Mm Outer Dia .Pipes. 18.9.2.2 22.22 Mm Outer Diapipes 18.12 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) : 18.12.1 With C.I. Wheel Of Approved Quality ( Screwed End ) 18.12.1.1 25 Mm Nominal Bore 18.12.1.2 32 Mm Nominal Bore. 18.12.1.3 40 Mm Nominal Bore 18.12.1.4 50 Mm Nominal Bore 18.12.1.5 65 Mm Nominal Bore 18.12.1.6 80 Mm Nominal Bore 18.12.2 With Brass Lever Handle Of Approved Quality. 18.12.2.1 25 Mm Nominal Bore 18.12.2.2 32 Mm Nominal Bore. 18.12.2.3 40 Mm Nominal Bore 18.12.2.4 50 Mm Nominal Bore 18.13 Providing And Fixing Cpvc Gate Valve With Knob Of Approved Quality. 18.13.1 25 Mm Nominal Bore 18.13.2 32 Mm Nominal Bore. 18.13.3 40 Mm Nominal Bore 18.13.4 50 Mm Nominal Bore 18.14 Providing And Fixing Ball Valve ( Brass ) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete : 18.14.1 15 Mm Nominal Bore 18.14.2 20 Mm Nominal Bore 18.14 3 25 Mm Nominal Bore 18.15 Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality ( Screwed End ) : 18.15.1 25 Mm Nominal Bore 18.15.1.1 Horizontal 18.15.1.2 Vertical 18.15.2 32 Mm Nominal Bore 18.15.2.1 Horizontal 18.15.2.2 Vertical 18.15.3 40 Mm Nominal Bore 18.15.3.1 Horizontal 18.15.3.2 Vertical 18.15.4 50 Mm Nominal Bore 18.15.4.1 Horizontal 18.15.4.2 Vertical 18.15.5 65 Mm Nominal Bore 18.15.5.1 Horizontal 18.15.5.2 Vertical 18.15.6 80 Mm Nominal Bore 18.15.6.1 Horizontal 18.15.6.2 Vertical 18.16 Providing And Fixing Brass Ferrule With C.I. Mouth Cover Including Boring And Tapping The Main : 18.16.1 15 Mm Nominal Bore 18.16.2 20 Mm Nominal Bore 18.16.3 25 Mm Nominal Bore 18.17 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions : 18.17.1 30 Cm Length 18.17.1.1 15 Mm Nominal Bore 18.17.1.2 20 Mm Nominal Bore 18.17.2 45 Cm Length 18.17.2.1 15 Mm Nominal Bore 18.17.2.2 20 Mm Nominal Bore 18.18 Constructing Masonry Chamber 30X30x50 Cm Inside, In Brick Work In Cement Mortar 1:4 ( 1 Cement :4 Sand ) For Stop Cock, With C. I. Surface Box 100X100 X75 Mm ( Inside ) With Hinged Cover Fixed In Cement Concrete Slab 1:2:4 Mix ( 1 Cement :2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement :5 Sand:10 Graded Stone Aggregate 40Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement :3 Sand ) 12Mm Thick Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design :- 18.18.1 With Common Burnt Clay Bricks Of 25 Kg / Sqcm Compressive Strength. 18.18.2 With Well Burnt Flyash Bricks Of 50 Kg / Sqm Compressive Strength. 18.19 Constructing Masonry Chamber 60X60x75 Cm Inside, In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) For Sluice Valve, With C.I. Surface Box 100Mm. Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside ) With Chained Lid And Rcc Top Slab 1:2:4 Mix ( 1 Cement :2 Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) 12 Mm Thick Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design 18.19.1 With Common Burnt Clay Bricks Of 25 Kg / Sqcm Compressive Strength. 18.19.2 With Flyash Bricks Of 50 Kg / Cm2 Strength 18.20 Constructing Masonry Chamber 60X60x75 Cm, Inside In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) For Fire Hydrants, With C.I. Surface Box 350X350 Mm. Top And 165 Mm Deep ( Inside ) With Chained Lid And Rcc Top Slab 1:2:4 Mix ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Sand:10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) 12 Mm Thick Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : 18.20.1 With Common Burnt Clay Bricks Of 25 Kg / Cm2 Compressive Strength. 18.20.2 With Flyash Bricks Of 50Kg / Cm2 Strength. 18.21 Constructing Masonry Chamber 60X45x50 Cm Inside, In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) For Water Meter Complete With C.I. Double Flap Surface Box 400X200x200 Mm ( Inside ) With Locking Arrangement And Rcc Top Slab 1:2:4 Mix ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Sand:10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) 12 Mm Thick Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : 18.21.1 With Common Burnt Clay Bricks Of 25 Kg / Sqcm Compressive Strength. 18.21.2 With Flyash Bricks Of 50Kg / Sqm Compressive Strength. 18.22 Painting G.I. Pipes And Fittings With Synthetic Enamel White Paint With Two Coats Over A Ready Mixed Priming Coat, Both Of Approved Quality For New Work : 18.22.1 15 Mm Diameter Pipe. 18.22.2 20 Mm Diameter Pipe. 18.22.3 25 Mm Diameter Pipe. 18.22.4 32 Mm Diameter Pipe. 18.22.5 40 Mm Diameter Pipe. 18.22.6 50 Mm Diameter Pipe. 18.23 Repainting G.I. Pipes And Fittings With Synthetic Enamel White Paint Of Approved Quality : 18.23.1 15 Mm Diameter Pipe. 18.23.2 20 Mm Diameter Pipe. 18.23.3 25 Mm Diameter Pipe 18.23.4 32 Mm Diameter Pipe 18.23.5 40 Mm Diameter Pipe 18.23.6 50 Mm Diameter Pipe 18.24 Painting G.I. Pipes And Fittings With Two Coats Of Anti-Corrosive Bitumastic Paint Of Approved Quality : 18.24.1 15 Mm Diameter Pipe 18.24.2 20 Mm Diameter Pipe 18.24.3 25 Mm Diameter Pipe 18.24.4 32 Mm Diameter Pipe 18.24.5 40 Mm Diameter Pipe 18.24.6 50 Mm Diameter Pipe 18.24.7 65 Mm Diameter Pipe 18.24.8 80 Mm Diameter Pipe 18.25 Providing And Filling Sand All-Round The G.I. Pipes In External Work. 18.25.1 15 Mm Diameter Pipe 18.25.2 20 Mm Diameter Pipe 18.25.3 25 Mm Diameter Pipe 18.25.4 32 Mm Diameter Pipe 18.25.5 40 Mm Diameter Pipe 18.25.6 50 Mm Diameter Pipe 18.25.7 65 Mm Diameter Pipe 18.25.8 80 Mm Diameter Pipe 18.26 Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) 18.26.1 15 Mm Nominal Bore 18.26.2 20 Mm Nominal Bore 18.26.3 25 Mm Nominal Bore 18.26.4 32 Mm Nominal Bore 18.26.5 40 Mm Nominal Bore 18.26.6 50Mm Nominal Bore 18.26.7 65Mm Nominal Bore 18.26.8 80 Mm Nominal Bore 18.27 Providing And Fixing G.I. Union In Existing G.I. Pipe Line, Cutting And Threading The Pipe And Making Long Screws Including Excavation, Refilling The Earth Or Cutting Of Wall And Making Good The Same Complete Wherever Required : 18.27.1 15 Mm Nominal Bore. 18.27.2 20 Mm Nominal Bore. 18.27.3 25 Mm Nominal Bore. 18.27.4 32 Mm Nominal Bore. 18.27.5 40 Mm Nominal Bore. 18.27.6 50 Mm Nominal Bore. 18.27.7 65 Mm Nominal Bore. 18.27.8 80 Mm Nominal Bore. 18.28 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank 18.29 Providing And Fixing Brass Bib Cock Of Approved Quality 18.29.1 15 Mm Nominal Bore 18.29.2 20 Mm Nominal Bore 18.30 Providing And Fixing Brass Stop Cock Of Approved Quality : 18.30.1 15 Mm Nominal Bore 18.30.2 20 Mm Nominal Bore 18.31 Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is: 8931, 15 Mm Nominal Bore. 18.32 Providing And Fixing C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gm, 15 Mm Nominal Bore. 18.33 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gm, 15 Mm Nominal Bore 18.34 Providing And Fixing C.P. Brass Stop Cock ( Concealed ) Of Standard Design And Of Approved Make Conforming To Is: 8931. 15 Mm Nominal Bore. 18.35 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:893115 Mm Nominal Bore 18.36 Providing And Fixing Chrome Plated Brass Battery Based Infrared Sensor Operated Pillar Cock, Having Foam Flow Technology. 15 Mm Nominal Bore. 18.37 Providing And Fixing C.P. Brass Pillar Cock Approved Quality And Make Conforming To Is: Specification. 15 Mm Nominal Bore 125 Mm Long Foam Flow. 18.38 Providing And Fixing C.P. Brass Basin Mixer Of Approved Quality And Make Conforming To Is: Specification.15 Mm Nominal Bore. 18.39 Providing And Fixing C.P. Brass Wall Mixer Of Approved Quality And Make Conforming To Is: Specification. 15 Mm Nominal Bore. 18.40 Providing And Fixing C.P. Brass Sink Mixer Of Approved Quality And Make Conforming To Is: Specification. 15 Mm Nominal Bore. 18.41 Providing And Fixing C.P. Brass Elbow Operated Bibcock Of Approved Quality And Make Conforming To Is: Specification. 15 Mm Nominal Bore. 18.42 Providing And Fixing C.P. Brass Elbow Operated Pillar Cock Of Approved Quality And Make Conforming To Is: Specification. 15 Mm Nominal Bore. 18.43 Providing And Fixing C.P. Brass Shower Rose With 15 Or 20 Mm Inlet : 18.43.1 100 Mm Diameter 18.43.2 150 Mm Diameter 18.44 Providing And Fixing Ptmt Bib Cock Of Approved Quality And Colour 15Mm Nominal Bore. 18.44.1 86 Mm Long Weighing Not Less Than 88 Gm 18.44.2 122 Mm Long Weighing Not Less Than 99 Gm 18.44.3 165Mm Long Weighing Not Less Than 110 Gm 18.44.4 90Mm Long Weighing Not Less Than 93 Gm 18.45 Providing And Fixing Ptmt Stop Cock Of Approved Quality And Colour. 18.45.1 15 Mm Nominal Bore, 86Mm Long. Weighing Not Less Than 88 Gms. 18.45.2 20Mm Nominal Bore, 89Mm Long. Weighing Not Less Than 88 Gms. 18.45.3 Concealed Stop Cock, 15Mm Nominal Bore, 108Mm Long. Weighing Not Less Than 108 Gms. 18.46 Providing And Fixing Ptmt Pillar Cock Of Approved Quality And Colour. 18.46.1 15Mm Nominal Bore, 107Mm Long. Weighing Not Less Than 110 Gms. 18.46.2 15Mm Nominal Bore, 125Mm Long Foam Flow Weighing Not Less Than 120 Gms. 18.47 Providing And Fixing Ptmt, Push Cock Of Approved Quality And Colour. 18.47.1 15 Mm Nominal Bore, 98Mm Long. Weighing Not Less Than 75 Gms. 18.47.2 15 Mm Nominal Bore, 80Mm Long Weighing Not Less Than 46 Gms. 18.48 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. 18.48.1 Circular Type. 18.48.1.1 100 Mm Nominal Dia. 18.48.1.2 125 Mm Nominal Dia With 25 Mm Waste Hole. 18.48.2 Rectangular Type With Openable Circular Lid. 18.48.2.1 150 Mm Nominal Size Square 100 Mm Diameter Of The Inner Hinged Round Grating. 18.49 Providing And Fixing Ptmt Angle Stop Cock 15 Mm Nominal Bore. Weighing Not Less Than 85 Gms. 18.50 Providing And Fixing Ptmt Swivelling Shower, 15Mm Nominal Bore. Weighing Not Less Than 40Gms. 18.51 Providing And Fixing Ptmt Ball Cock Of Approved Quality, Colour And Make Complete With Epoxy Coated Aluminium Rod With L.P. / H.P.H.D. Plastic Ball. 18.51.1 15 Mm Nominal Bore, 105 Mm Long. Weighing Not Less Than 138 Gms. 18.51.2 20 Mm Nominal Bore, 120 Mm Long. Weighing Not Less Than 198 Gms. 18.51.3 25 Mm Nominal Bore, 152Mm Long. Weighing Not Less Than 440 Gms. 18.51.4 40Mm Nominal Bore, 206Mm Long. Weighing Not Less Than 690 Gms. 18.51.5 50Mm Nominal Bore, 242Mm Long. Weighing Not Less Than 1240 Gms. 18.52 Providing And Fixing Unplasticised P.V.C. Connection Pipe With Ptmt Nuts Collar And Bush Of Approved Quality And Colour 15 Mm Nominal Bore 18.52.1 30Cm Length. 18.52.2 45 Cm Length. 18.53 Providing And Fixing Ptmt Extension Nipple For Water Tank Pipe, Fittings Of Approved Quality And Colour. 18.53.1 15 Mm Nominal Bore.Weighing Not Less Than 32 Gms. 18.53.2 20Mm Nominal Bore.Weighing Not Less Than 40Gms. 18.53.3 25Mm Nominal Bore.Weighing Not Less Than 62 Gms. 18.54 Providing And Fixing Enclosed Type Water Meter ( Bulk Type ) Conforming To Is: 2373 And Tested By Municipal Board Complete With Bolts, Nuts, Rubber Insertions Etc. ( The Tail Pieces If Required Will Be Paid Separately ) : 18.54.1 80 Mm Nominal Bore 18.54.2 100 Mm Nominal Bore 18.54.3 150 Mm Nominal Bore 18.54.4 200 Mm Nominal Bore 18.55 Providing And Fixing C.I. Dirt Box Strainer For Bulk Type Water Meter With Nuts, Bolts, Rubber Insertions Etc. Complete Conforming To Is : 2373 : 18.55.1 80 Mm Nominal Bore 18.55.2 100 Mm Nominal Bore 18.55.3 150 Mm Nominal Bore 18.55.4 200 Mm Nominal Bore 18.56 Cutting Holes Upto 30X30 Cm In Walls Including Making Good The Same : With Common Burnt Clay Bricks Of 25 Kg / Sqcmor Flyash Bricks Of 50 Kg / Cm2compressive Strength. 18.57 Cutting Holes Upto 15X15 Cm In R.C.C. Floors And Roofs For Passing Drain Pipe Etc. And Repairing The Hole After Insertion Of Drain Pipe Etc. With Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Including Finishing Complete So As To Make It Leak Proof. 18.58 Making Chases Upto 7.5X7.5 Cm In Walls Including Making Good And Finishing With Matching Surface After Housing G.I. Pipe Etc. 18.59 Making Hole Upto 20X20 Cm And Embedding Pipes Upto 150 Mm Diameter In Masonry And Filling With Cement Concrete 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Including Disposal Of Malba. 18.60 Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete : 18.60.1 25 To 40 Mm Nominal Bore 18.60.2 50 To 80 Mm Nominal Bore 18.61 Providing And Fixing Cp Jet Assembly To Including Connection Etc Complete. 18.62 Providing And Fixing Ferro- Cement Water Storage Tank With Cover, Having Minimum Thickness Of 10Mm. The Wall To Be Reinforced With Two Layers Of Double Galvanized Annealed Square Wooven Wire Mesh Of 20 Gauge Wire Spaced At 15Mm For 300 Litre Capacity And 12Mm For 450 To 2500 Litres Capacity Finish With 3 Layers Of Cement Mortar 1:2 Duly Modified With Polymer Based Plastizers And Hardening Chemicals ( Burogrout And Buroseal ) The Tank Should Conform To The Specification Prescribed By Structural Engineering Research Centre Roorkee / Gaziabad. The Tanks To Be Painted With Drinking Water Paint Inside And Aluminimum Paint Out Side With Provision Of Outlet, Inlet, Overflow And Cleaning Including Hoisting And Placing In Position Upto Floor Two Level Or 5 M. Height. 18.63 Add Extra For Additional Floor Lift Beyond 5.0M.Height. 19.1 Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 ( 1 Cement : 1 Sand ) Including Testing Of Joints Etc. Complete : Excavation To Be Paid Seperataly 19.1.1 100 Mm Diameter 19.1.2 150 Mm Diameter 19.1.3 200 Mm Diameter 19.1.4 230 Mm Diameter 19.1.5 250 Mm Diameter 19.1.6 300 Mm Diameter 19.2 Providing And Laying Cement Concrete 1:5:10 ( 1 Cement : 5 Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) All-Round S.W. Pipes Including Bed Concrete As Per Standard Design: 19.2.1 100 Mm Diameter S.W. Pipe 19.2.2 150 Mm Diameter S.W. Pipe 19.2.3 200 Mm Diameter S.W. Pipe 19.2.4 230 Mm Diameter S.W. Pipe 19.2.5 250 Mm Diameter S.W. Pipe 19.2.6 300 Mm Diameter S.W. Pipe 19.3 Providing And Laying Cement Concrete 1:5:10 ( 1 Cement : 5 Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) Upto Haunches Of S.W. Pipes Including Bed Concrete As Per Standard Design : 19.3.1 100 Mm Diameter S.W. Pipe 19.3.2 150 Mm Diameter S.W. Pipe 19.3.3 200 Mm Diameter S.W. Pipe 19.3.4 230 Mm Diameter S.W. Pipe 19.3.5 250 Mm Diameter S.W. Pipe 19.3.6 300 Mm Diameter S.W. Pipe 19.4 Providing And Laying Below Ground Unplasticised Pvc Pipe To With Stand Working Pressure Of 4 Kg / Cm2 Soild Waste Pipes Confirming To Is:13592 And Is:4985 Including Jointing With Seal Ring Confirming To Is :5282 Leaving 10Mm Gap For Thermal Expansion All Necessary Fittings Etc. Complete. Excavation To Be Paid Seperataly. 19.4.1 110 Mm Diameter Od ( Min. Wall Thickness 3.2Mm ) 19.4.2 160 Mm Diameter Od ( Min. Wall Thickness 4.0Mm ) 19.4.3 200 Mm Diameter Od ( Min. Wall Thickness 4.9Mm ) 19.4.4 250 Mm Diameter Od ( Min. Wall Thickness 6.2Mm ) 19.4.5 300 Mm Diameter Od ( Min. Wall Thickness 7.7Mm ) 19.5 Providing And Laying Cement Concrete 1:3:6 ( 1 Cement: 3 Sand: 6 Graded Stone Aggregate 20 Mm Nominal Size ) All-Round Pvc. Pipes Including Bed Concrete As Per Standard Design: 19.5.1 110 Mm Diameter Pvc. Pipe 19.5.2 160 Mm Diameter Pvc. Pipe 19.5.3 200 Mm Diameter Pvc. Pipe 19.5.4 250 Mm Diameter Pvc. Pipe 19.5.5 300 Mm Diameter Pvc Pipe 19.6 Providing And Laying Cement Concrete 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Up To Haunches Of Pvc. Pipes Including Bed Concrete As Per Standard Design : 19.6.1 110 Mm Diameter Pvc. Pipe 19.6.2 160 Mm Diameter Pvc. Pipe 19.6.3 200 Mm Diameter Pvc. Pipe 19.6.4 250 Mm Diameter Pvc. Pipe 19.6.5 300 Mm Diameter Pvc Pipe 19.7 Providing And Fixing Square- Mouth S.W. Gully Trap Class Sp1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size ( Inside ) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design : 19.7.1 100X100 Mm Size P Type 19.7.1.1 With Well Burnt Bricks 19.7.1.2 With Sewer Bricks Conforming To Is : 4885 19.7.2 150 X 100 Mm Size P Type. 19.7.2.1 With Well Burnt Bricks 19.7.2.2 With Sewer Bricks Conforming To Is : 4885 19.7.3 180X150 Mm Size P Type 19.7.3.1 With Well Burnt Bricks 19.7.3.2 With Sewer Bricks Conforming To Is : 4885 19.8 Providing And Laying Non- Pressure Np2 Class ( Light Duty ) R.C.C. Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In The Proportion Of 1:2 ( 1 Cement : 2 Sand ) Including Testing Of Joints Etc. Complete : 19.8.1 100 Mm Dia. R.C.C. Pipe 19.8.2 150 Mm Dia. R.C.C. Pipe 19.8.3 250 Mm Dia. R.C.C. Pipe 19.8.4 300 Mm Dia. R.C.C. Pipe 19.8.5 450 Mm Dia. R.C.C. Pipe 19.8.6 500 Mm Dia. R.C.C. Pipe 19.8.7 600 Mm Dia. R.C.C. Pipe 19.9 Constructing Brick Masonry Manhole In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) R.C.C. Top Slab With Cement Concrete 1:2:4 Mix ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , Foundation Concrete 1:2:4 Mix ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) Inside Plastering 12Mm Thick With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design 19.9.1 Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame ( Light Duty ) 455X610 Mm Internal Dimensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg ( Weight Of Cover 23 Kg And Weight Of Frame 15 Kg ) : 19.9.1.1 With Well Burnt Bricks 19.9.1.2 With Sewer Bricks Conforming To Is : 4885 19.9.2 Inside Size 120X90 Cm And 90 Cm Deep Including C.I. Cover With Frame ( Medium Duty ) 500 Mm Internal Diameter, Total Weight Of Cover And Frame To Be Not Less Than 116 Kg ( Weight Of Cover 58 Kg And Weight Of Frame 58 Kg ) : 19.9.2.1 With Well Burnt Bricks 19.9.2.2 With Sewer Bricks Conforming To Is : 4885 19.9.3 Inside Size 120X90 Cm And 90 Cm Deep Including C.I. Cover With Frame ( Heavy Duty ) 560 Mm Internal Diameter, Total Weight Of Cover And Frame To Be Not Less Than 208 Kg ( Weight Of Cover 108 Kg And Weight Of Frame 100 Kg ) : 19.9.3.1 With Well Burnt Bricks 19.9.3.2 With Sewer Bricks Conforming To Is : 4885 19.10 Extra For Depth For Manholes 19.10.1 Size 90X80 Cm 19.10.1.1 With Well Burnt Bricks 19.10.1.2 With Sewer Bricks Conforming To Is : 4885 19.10.2 Size 120X90 Cm 19.10.2.1 With Well Burnt Bricks 19.10.2.2 With Sewer Bricks Conforming To Is : 4885 19.11 Constructing Brick Masonry Circular Type Manhole 0.91M Internal Dia At Bottom And 0.56M Dia At Top In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) , Inside Cement Plaster 12 Mm Thick With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Finished With A Floating Coat Of Neat Cement, Foundation Concrete 1:3:6 Mix ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 40Mm Nominal Size ) , And Making Necessary Channel In Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Including Centering Shuttering All Complete. ( Foot Rests And 12Mm Thick Cement Plaster At The External Surface Shall Be Paid For Separately ) : 19.11.1 With Well Burnt Bricks 19.11.2 With Sewer Bricks Conforming To Is : 4885 19.12 Extra Depth For Circular Type Manhole 0.91M Internal Dia ( At Bottom ) Beyond 0.91M To 1.67M 19.12.1 With Well Burnt Bricks 19.12.2 With Sewer Bricks Conforming Is : 4885 19.13 Constructing Brick Masonry Circular Manhole 1.22M Internal Dia At Bottom And 0.56M Dia At Top In Cement Mortar 1:4 ( 1 Cement :4 Sand ) Inside Cement Plaster 12Mm Thick With Cement Mortar 1:3 ( 1 Cement :3 Sand ) Finished With A Floating Coat Of Neat Cement Foundation Concrete 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 40Mm Nominal Size ) And Making Necessary Channel In Cement Concrete 1:2:4 Including Centering Shuttering All Complete. ( Foot Rests And 12 Mm Thick Cement Plaster At The External Surface Shall Be Paid For Separately ) 19.13.1 With Well Burnt Bricks 19.13.2 With Sewer Bricks Conforming Is : 4885 19.14 Extra Depth For Circular Type Manhole 1.22M Internal Dia ( At Bottom ) Beyond 1.68 M To 2.29 M : 19.14.1 With Well Burnt Bricks 19.14.2 With Sewer Bricks Conforming Is : 4885 19.15 Constructing Brick Masonry Circular Manhole 1.52 M Internal Dia At Bottom And 0.56 M Dia At Top In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Inside Cement Plaster 12Mm Thick With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Finished With A Floating Coat Of Neat Cement, Foundation Concrete 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 40Mm Nominal Size ) And Making Necessary Channel In Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) Finished With A Floating Coat Of Neat Cement All Complete As Per Standard Design : 19.15.1 2.30M Deep With Sfrc Cover And Frame ( Heavy Duty Hd-20 Grade Designation ) 560Mm Internal Diameter Conforming To I.S. 12592, Total Weight Of Cover And Frame To Be Not Less Than 182 Kg. Fixed In Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) Including Centering Shuttering All Complete. ( Foot Rests And 12 Mm Thick Cement Plaster At The External Surface Shall Be Paid For Separately ) : 19.15.1.1 With Well Burnt Bricks 19.15.1.2 With Sewer Bricks Conforming Is : 4885 19.16 Extra Depth For Circular Type Manhole 1.52 M Internal Dia ( At Bottom ) Beyond 2.30 M : 19.16.1 With Well Burnt Bricks 19.16.2 With Sewer Bricks Conforming Is : 4885 19.17 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20x10 Cm Cement Concrete Blocks 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) As Per Standard Design : 19.17.1 With 20X20 Mm Square Bar 19.17.2 With 20 Mm Diameter Round Bar 19.18 Providing Orange Colour Safety Foot Rest Of Minimum 6 Mm Thick Plastic Encapsulated As Per Is : 10910 On 12Mm Dia Steel Bar Conforming To Is : 1786 Having Minimum Cross Section As 23 Mmx25mm And Over All Minimum Length 263 Mm As Per Standard Drawing And Suitable To Withstand The Bend Test And Chemical Resistance Test As Per Specifications And Having Manufactures Permanent Identification Mark To Be Visible Even After Fixing, Including Fixing In Manholes With 30X20x15 Cm Cement Concrete Block 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Complete As Per Design. 19.19 Replacement Of M.S. Foot Rests In Manholes Including Dismantling Concrete Blocks And Fixing With 20X20x10 Cm Cement Concrete Blocks 1:3:6 ( 1 Cement : 3 Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) : 19.19.1 With 20X20 Mm Square Bar 19.19.2 With 20 Mm Diameter Round Bar 19.20 Supplying And Fixing C.I. Cover Without Frame For Manholes : 19.20.1 455X610 Mm Rectangular C.I. Cover ( Light Duty ) The Weight Of The Cover To Be Not Less Than 23 Kg. 19.20.2 500 Mm Diameter C.I. Cover ( Medium Duty ) The Weight Of The Cover To Be Not Less Than 58 Kg. 19.20.3 560 Mm Diameter C.I. Cover ( Heavy Duty ) The Weight Of The Cover To Be Not Less Than 108 Kg. 19.21 Providing And Fixing In Position Precast R.C.C. Manhole Cover And Frame Of Required Shape And Approved Quality 19.21.1 Light Duty D- 2.5 19.21.1.1 Rectangular Shape 600X450mm Internal Dimensions 19.21.1.2 Square Shape 450Mm Internal Dimensions 19.21.1.3 Circular Shape 450Mm Internal Diameter 19.21.2 Medium Duty - 10 19.21.2.1 Square Shape 450Mm Internal Dimension 19.21.2.2 Circular Shape 500Mm Internal Diameter 19.21.3 Heavy Duty D - 20 19.21.3.1 Circular Shape 560 Mm Internal Diameter 19.21.4 Extra Heavy Duty - 35 19.21.4.1 Circular Shape 560 Mm Internal Dia. 19.22 Supplying And Fixing C.I. Cover 300X300 Mm Without Frame For Gully Trap ( Standard Pattern ) The Weight Of Cover To Be Not Less Than 4.5Kg. 19.23 Making Connection Of Drain Or Sewer Line With Existing Manhole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Mix ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Cement Plastered On Both Sides With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) Finished With A Floating Coat Of Neat Cement And Making Necessary Channels For The Drain Etc. Complete : 19.23.1 For Pipes 100 To 230 Mm Diameter 19.23.2 For Pipes 250 To 300 Mm Diameter 19.23.3 For Pipes 350 To 450 Mm Diameter 19.24 Providing Sand Cast Iron Drop Connection Externally For 60 Cm Drop From Branch Sewer Line To Main Sewer Manhole Including Inspection And Cleaning Eye With Chain And Lid, Sand Cast Iron Drop Pipe And Bend Encased All-Round With Cement Concrete 1:5:10 ( 1 Cement : 5 Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) With Cement Mortar 1:1 ( 1 Cement : 1 Sand ) Joints Between Sand Cast Iron Tee And S.W. Pipe, Making Required Channels Complete As Per Standard Design And Specifications : 19.24.1 100 Mm Dia. Sand Cast Iron Drop Connection 19.24.2 150 Mm Dia. Sand Cast Iron Drop Connection 19.25 Extra For Depths Beyond 60 Cm Of Sand Cast Iron Drop Connection Complete : 19.25.1 For 100 Mm Dia. Sand Cast Iron Drop Connection 19.25.2 For 150 Mm Dia. Sand Cast Iron Drop Connection 19.26 Raising Manhole Cover And Frame Slab To Required Level Including Dismantling Existing Slab And Making Good The Damage As Required ( Brick Work For Raising Depth Of Manhole To Be Paid Separately ) : 19.26.1 Rectangular Manhole 90X80 Cm With Rectangular Cover 600X450 Mm Of Grade Ld - 2.5 19.26.2 Rectangular Manhole 120X90 Cm With Circular Cover 500 Mm Dia Of Grade Md - 10 19.26.3 Rectangular Manhole 120X90 Cm With Circular Cover 560 Mm Dia Of Grade Hd - 20 19.26.4 Circular Manhole 140 Cm Dia With Circular Cover 600 Mm Dia Of Grade Extra Heavy Duty Hd -35 19.27 Constructing Brick Masonry Road Gully Chamber 50X45x60cm With Bricks In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including 500X450 Mm Precast R.C.C. Horizontal Grating With Frame Complete As Per Standard Design : 19.27.1 With Well Burnt Bricks 19.27.2 With Fly Ash Bricks 100 Key / Cm2 Strangth 19.28 Constructing Brick Masonry Road Gully Chamber 45X45x77.5Cm With Bricks In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) With Precast R.C.C. Vertical Grating Complete As Per Standard Design : 19.28.1 With Well Burnt Bricks 19.28.2 With Fly Ash Bricks 100 Kg / Cm2 Strength 19.29 Constructing Brick Masonry Road Gully Chamber 110X50x77.5Cm With Bricks In Cement Mortar 1:4 ( 1 Cement : 4 Sand ) Including 500X450 Mm Precast R.C.C. Horizontal Grating With Frame And Vertical Grating Complete As Per Standard Design : 19.29.1 With Well Burnt Bricks 19.29.2 With Fly Ash Bricks 100 Kg / Cm2 Strength 19.30 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks Of Class Designation 75 And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. 19.30.1 With Well Burnt Bricks 19.31 Constructing Soak Pit 1.20X1.20X1.20M Filled With Brickbats Including S.W. Drain Pipe 100 Mm Diameter And 1.20M Long Complete As Per Standard Design. 19.32 Providing And Fixing S.W. Intercepting Trap In Manholes With Stiff Mixture Of Cement Mortar 1:1 ( 1 Cement : 1 Sand ) Including Testing Of Joints Etc. Complete : 19.32.1 100 Mm Dia 19.32.2 150 Mm Dia 19.33 Providing, Laying And Jointing Half Round Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 ( 1 Cement : 1 Sand ) Including Testing Of Joints Etc. Complete : Excavation To Be Paid Seperataly 19.33.1 100 Mm Dia 19.33.2 150 Mm Dia 19.33.3 200 Mm Dia 19.33.4 230 Mm Dia 19.33.5 250 Mm Dia 19.33.6 300 Mm Dia 19.34 Providing And Laying Half Round Rcc Pipes Class ( Light Duty ) With Collars Jointed With Stiff Mixture Of Cement Mortar In The Proportion Of 1:2 ( 1 Cement : 2 Sand ) Including Testing Of Joints Etc. Complete : Excavation To Be Paid Seperataly 19.34.1 100 Mm Dia. Half Round R.C.C. Pipe 19.34.2 150 Mm Dia. Half Round R.C.C. Pipe 19.34.3 250 Mm Dia. Half Round R.C.C. Pipe 19.34.4 300 Mm Dia. Half Round R.C.C. Pipe 19.35.1 Deduct For Not Provide C.I. Manhole Cover With Frame For Item No. 19.9.1.1 & 19.9.1.2 19.35.2 Deduct For Not Provide C.I. Manhole Cover With Frame For Item No. 19.9.2.1 & 19.9.2.2 19.35.3 Deduct For Not Provide C.I. Manhole Cover With Frame For Item No. 19.9.3.1 & 19.9.3.2 19.36 Providing & Fixing Of Precast Rcc Drain Cover Of Size 600X 450 X70mm ( Thickness ) With 4 Holes, Manufactured By Using M-30 Grade Of Concrete Reinforced With 8Mm Dia Tor Steel @100Mm C / C Both Ways, Manufactured By Vibro Compaction Process Using Joint Less Frp Moulds, So At To Achieve Shuttering Finish On Five Faces @Top Face Will Have Broom Finish Etc Complete. 19.37 Providing & Fixing Of Precast Rcc Drain Cover Of Size 750X600 X70mm ( Thickness ) With 6 Holes, Manufactured By Using M-30 Grade Of Concrete Reinforced With 8Mm Dia Tor Steel @100Mm C / C Both Ways, Manufactured By Vibro Compaction Process Using Joint Less Frp Moulds, So At To Achieve Shuttering Finish On Five Faces @Top Face Will Have Broom Finish Etc Complete. 19.38 Providing & Fixing Of Precast Rcc Drain Cover Of Size 900X450 X90mm ( Thickness ) With 8 Holes, Manufactured By Using M-30 Grade Of Concrete Reinforced With Two Layers Of 8Mm Dia Tor Steel @100Mm C / C Both Ways, Manufactured By Vibro Compaction Process Using Joint Less Frp Moulds, So At To Achieve Shuttering Finish On Five Faces @ Top Face Will Have Broom Finish Etc Complete. 19.39 Providing & Fixing Of Precast Rcc Drain Cover Of Size 1150X400 X100mm ( Thickness ) With 10 Holes, Manufactured By Using M-30 Grade Of Concrete Reinforced With Two Layers Of 8Mm Dia Tor Steel @100Mm C / C Both Ways, Manufactured By Vibro Compaction Process Using Joint Less Frp Moulds, So At To Achieve Shuttering Finish On Five Faces @Top Face Will Have Broom Finish Etc Complete. 19.40 Supplying And Fixing Of Frp / Grp Composite Manhole Cover With Frame Of Clear Opening Size 900X450mm Rectangular Having Weight Of ( Complete Unit ) ( Weight Of Frame 11.7 Kg + Weight Of Cover 43.76Kg ± 10% ) ( Hd / 25Mt ) Having Load Bearing Capacity ( Point Load 25Mt ) As Per Testing Code Bsen 124:1994. Having Lifting Arrangement Should Have An Insertion Of 5Mm Double Sealed Closed Key Hole And High Strength Plastic Alloy / Stainless Steel Socketed Arrangement. 19.41 Supplying And Fixing Of Frp / Grp Composite Manhole Cover With Frame Of Clear Opening Size 450X600mm Rectangular Having Weight Of ( Complete Unit ) ( Weight Of Frame 1.84Kg + Weight Of Cover 14.2Kg ± 10% ) ( Ld / 2.5Mt ) Having Load Bearing Capacity ( Point Load 2.5Mt ) As Per Testing Code Bsen 124:1994. Having Lifting Arrangement Should Have An Insertion Of 5Mm Double Sealed Closed Key Hole And High Strength Plastic Alloy / Stainless Steel Socketed Arrangement. 19.42 Supplying And Fixing Of Frp / Grp Composite Manhole Cover With Frame Of Clear Opening Size 300X300mm ( Square ) Having Weight Of ( Complete Unit ) ( Weight Of Frame 1.12Kg + Weight Of Cover 4.1Kg ± 10% ) ( Ld / 2.5Mt ) Having Load Bearing Capacity ( Point Load 2.5Mt ) As Per Testing Code Bsen 124:1994. Having Lifting Arrangement Should Have An Insertion Of 5Mm Double Sealed Closed Key Hole And High Strength Plastic Alloy / Stainless Steel Socketed Arrangement. 19.43 Supplying And Fixing Of Frp / Grp Composite Manhole Cover With Frame Of Clear Opening Size 600Mm ( Round ) Having Weight Of ( Complete Unit ) ( Weight Of Frame 13.6Kg + Weight Of Cover 43.1Kg + - 10% ) ( Hd / 25Mt ) Having Load Bearing Capacity ( Point Load 25Mt ) As Per Testing Code Bsen 124:1994. Having Lifting Arrangement Should Have An Insertion Of 5 Mm Double Sealed Closed Key Hole And High Strength Plastic Alloy / Stainless Steel Socketed Arrangement 19.44 Supplying And Fixing Of Frp / Grp Composite Manhole Cover With Frame Of Clear Opening Size 500Mm ( Round ) Having Weight Of ( Complete Unit ) ( Weight Of Frame 11.2Kg + Weight Of Cover 41.78Kg ± 10% ) ( Hd / 25Mt ) Having Load Bearing Capacity ( Point Load 25Mt ) As Per Testing Code Bsen 124:1994. Having Lifting Arrangement Should Have An Insertion Of 5Mm Double Sealed Closed Key Hole And High Strength Plastic Alloy / Stainless Steel Socketed Arrangement 19.45 Deduct For Not Providing And Installing Frp / Grp Manhole Cover Size 19.45.1 900Mmx450mm ( Weight Of Cover 43.76Kg ± 10% ) 19.45.2 450Mmx600mm ( Weight Of Cover 14.2Kg ± 10% ) 19.45.3 300Mmx300mm ( Weight Of Cover 4.1Kg ± 10% ) 19.45.4 600Mm ( Weight Of Cover 41.78Kg ± 10% ) 19.45.5 500Mm ( Weight Of Cover 43.1Kg ± 10% ) 19.46 Providind, Laying And Jointing Hdpe Double Wall Corrugated ( Dwc ) Pipes ( Excavation To Be Paid Seperately ) 19.46.1 100 Mm Dia To 110 Mm Dia 19.46.2 150 Mm Dia To 160 Mm Dia 19.46.3 200 Mm Dia 19.46.4 250 Mm Dia 19.46.5 300 Mm Dia 21.1 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : 21.1.1 For Fixed Portion. 21.1.1.1 Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac15 ) 21.1.1.2 Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 21.1.1.3 Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron ) 21.1.2 For Shutters Of Doors, Windows And Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) . 21.1.2.1 Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac15 ) 21.1.2.2 Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 21.1.2.3 Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron ) 21.1.3 Deduct For Not Providing Edpm Rubber / Neoprene Gasket All Around. 21.2 Providing And Fixing 12Mm Thick Pre-Laminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminium Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge. 21.2.1 Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side. 21.2.2 Pre-Laminated Particle Board With Decorative Lamination On Both Sides. 21.3 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : 21.3.1 With Float Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10 Kg / Sqm ) 21.3.2 With Float Glass Panes Of 5.0 Mm Thickness ( Weight Not Less Than 12.50 Kg / Sqm ) 21.3.3 With Float Glass Panes Of 8 Mm Thickness ( Weight Not Less Than 20 Kg / Sqm ) . 21.4 Add Extra For Providing And Fixing Froasted Glass Instead Of Float Glass 21.4.1 With Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10 Kg / Sqm ) 21.4.2 With Glass Panes Of 5.0 Mm Thickness ( Weight Not Less Than 12.50 Kg / Sqm ) 21.4.3 With Glass Panes Of 8 Mm Thickness ( Weight Not Less Than 20 Kg / Sqm ) . 21.5 Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg., For Doors, Including Cost Of Cutting Floors , Embedding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer-In-Charge : 21.5.1 With Stainless Steel Cover Plate - Minimum 1.25 Mm Thickness 21.5.2 With Brass Cover Plate - Minimum 1.25 Mm Thickness. 21.6 Providing And Fixing Powder Coated Aluminium Work ( Minimum Thickness Of Powder Coating 50 Micron ) Consisting Of Tee / Angle Sections, Of Approved Make Conforming To Is : 733 In Frames Of False Ceiling Including Aluminium Angle Cleats With Necessary C.P. Brass / Stainless Steel Sunk Screws, Aluminium Perimeter Angles Fixed To Wall With Stainless Steel Rawl Plugs @ 450 Mm Centre To Centre And Fixing The Frame Work To G.I. Level Adjusting Hangers 6 Mm Dia. With Necessary Cadmium Plated Machine Screws All Complete As Per Approved Architectural Drawings And Direction Of The Engineer-In-Charge ( Level Adjusting Hangers, Ceiling Cleats And Expansion Hold Fasteners To Be Paid For Separately ) . 21.7 Providing And Fixing 6 Mm Dia. G.I. Level Adjusting Hangers ( Upto 1200Mm Length ) , Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of G.I. Flat 40X3mm Size 60 Mm Long And Stainless Steel Expandable Dash Fastener Of 12.5 Mm Dia And 50 Mm Long, Complete As Per Direction Of Engineer -In-Charge. 21.8 Providing And Fixing Machine Moulded Aluminium Covering Of Approved Pattern And Design, Made Out Of Machine Cut Aluminium Sheet And Machine Holed For Receiving Dash Fastener, Over Expansion Joints On Vertical Surfaces / Ceiling Floors, The Fixing On Plate In One Row On One Side Of Joint Only Shall Be Done With Stainless Steel Dash Fasteners Of 8 Mm Dia And 75 Mm Long Bolt Including Providing Aluminium Washers 2 Mm Thick And 15 Mm Dia, At A Staggered Pitch Of 200Mm Centre To Centre Including Drilling Holes In The Receiving Surface And Providing Expandable Plastic Sleeves In Holes Etc. Complete As Per Direction Of Engineer-In-Charge : 21.8.1 Anodised Aluminium Sheet 2.5Mm Thick ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15 ) 21.8.2 Powder Coated Aluminium Sheet 2.5Mm Thick ( Minimum Thickness Of Powder Coating 50 Micron ) 21.9 Filling The Gap In Between Aluminium Frame And Adjacent Rcc / Brick / Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete. Upto 5 Mm Depth And 5 Mm Width 21.10 Extra For Applying Additional Anodic Coating Ac 25 Instead Of Ac 15 To Aluminium Extruded Sections. For Fixed Portion & For Shutters Of Doors, Windows And Ventilators 21.11 Providing And Fixing Double Glazed Hermetically Sealed Glazing In Aluminium Windows, Ventilators And Partition Etc. With 6 Mm Thick Clear Float Glass Both Side Having 12 Mm Air Gap Including Providing Epdm Gasket, Perforated Aluminium Spacers, Desiccants, Sealant ( Both Primary And Secondary Sealant ) Etc. As Per Specifications, Drawings And Direction Of Engineer-In-Charge Complete. 21.12 Providing And Fixing Aluminium Tubular Handle Bar 32 Mm Outer Dia, 3.0 Mm Thick And Length As Required With Ss Screws Etc Complete As Per Direction Of Engineer-In-Charge. 21.12.1 Anodized ( Ac 15 ) Aluminium Tubular Handle Bar 21.12.2 Powder Coated Minimum Thickness 50 Micron Aluminium Tubular Handle Bar. 21.12.3 Polyester Powder Coated Minimum Thickness 50 Micron Aluminium Tubular Handle Bar. 21.13 Providing And Fixing Brass 100 Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 21.14 Providing And Fixing Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868. Minimum Anodic Coating Of Grade Ac15 ) Sub Frame Work For Windows And Ventilators With Extruded Built Up Standard Tubular Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixed With Dash Fastener Of Required Dia And Size ( Dash Fastener To Be Paid For Separately ) . 21.15 Providing And Fixing Aluminium Casement Windows Fastener Of Required Length For Aluminium Windows With Necessary Screws Etc. Complete. 21.15.1 Anodized ( Ac15 ) Aluminium 21.15.2 Powder Coated Minimum Thickness 50 Micron Aluminium. 21.15.3 Polyester Powder Coated Minimum Thickness 50 Micron Aluminium. 21.16 Providing And Fixing Aluminium Round Shape Handle Of Outer Dia 100Mm With Ss Screws Etc. Complete As Per Direction Of Engineer-In-Charge 21.16.1 Anodized ( Ac15 ) Aluminium 21.16.2 Powder Coated Minimum Thickness 50 Micron Aluminium 21.16.3 Polyester Powder Coated Minimum Thickness 50 Micron Aluminium. 21.17 Providing And Fixing Anodised Aluminium Grill ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac15 ) Of Approved Design / Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass / Stainless Steel Screws @ 200Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And Direction Of Engineer-In-Charge. ( Only Weight Of Grill To Be Measured For Payment ) . 21.18 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Action Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-In-Charge ( Door Handle, Lock And Stopper Etc.To Be Paid Separately ) . 21.19 Providing And Fixing 50 Micron Thick Reflective One Way Type Heat / Light Control Film To Window / Door Glazing With Complete Accessories As Per Direction Of Engineer-In-Charge Of Approved Brand And Make. 21.20 Providing And Fixing 50 Micron Thick Frosted Heat / Light Control Film To Window / Door Glazing With Complete Accessories As Per Direction Of Engineer-In-Charge Of Approved Brand And Make. 21.21 Providing And Fixing 25 Micron Thick Non Reflective Heat / Light Control Film To Window / Door Glazing With Complete Accessories As Per Direction Of Engineer-In- Charge Of Approved Brand And Make. 21.22 Providing And Fixing 12 Mm Thick Toughened Glass Including All Connectors And Fixing Accessories All Complete For Partitions, Cubicals Etc. As Per Direction Of Engineer-In-Charge. 21.24 Extra For Froasted Glass ( With Eching Film ) In Item No. 21.22 22.1 Providing And Laying Integral Cement Based Treatment For Water Proofing On Horizontal Surface At All Depth Below Ground Level For Under Ground Structures As Directed By Engineer-In-Charge Consisting Of: ( I )      Ist Layer Of 22Mm To 25Mm Thick Approved And Specified Rough Stone Slab Over A 25Mm Thick Base Of Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Mixed With Water Proofing Compound Conforming To Is: 2645 In The Recommended Proportion Over The Levelling Course ( Levelling Course To Be Paid Separately ) . Joints Sealed And Grouted With Cement Slurry Mixed With Water Proofing Compound. ( Ii )          2Nd Layer Of 25Mm Thick Cement Mortar 1:3 ( 1 Cement: 3 Sand ) Mixed With Water Proofing Compound In Recommended Proportions. ( Iii )         Finishing Top With Stone Aggregate Of 10Mm To 12Mm Nominal Size Spreading @ 8 Cudm / Sqm Thoroughly Embedded In The 2Nd Layer. ( With 5 Years Service Guarantee ) Using Rough Kota Stone. 22.2 Providing And Laying Integral Cement Based Treatment For Water Proofing On The Vertical Surface By Fixing Specified Stone Slab 22 Mm To 25Mm Thick With Cement Slurry Mixed With Water Proofing Compound Conforming To Is:2645 In Recommended Proportions With A Gap Of 20Mm ( Minimum ) Between Stone Slabs And The Receiving Surfaces And Filling The Gaps With Neat Cement Slurry Mixed With Water Proofing Compound And Finishing The Exterior Of Stone Slab With Cement Mortar 1:3 ( 1 Cement : 3 Sand ) 20 Mm Thick With Neat Cement Punning Mixed With Water Proofing Compound In Recommended Proportion Complete At All Levels And As Directed By Engineer-In-Charge ( With 5 Years Service Guarantee ) Using Rough Kota Stone. 22.3 Providing And Laying Water Proofing Treatment To Vertical And Horizontal Surfaces Of Depressed Portions Of W.C., Kitchen And The Like Consisting Of : A )    Ist Course Of Applying Cement Slurry @ 4.4 Kg / Sqm Mixed With Water Proofing Compound Conforming To Is 2645 In Recommended Proportions Including Rounding Off Junction Of Vertical And Horizontal Surface. B )    Iind Course Of 20Mm Cement Plaster 1:3 ( 1 Cement: 3 Sand ) Mixed With Water Proofing Compound In Recommended Proportion Including Rounding Off Junction Of Vertical And Horizontal Surface. C )     Iiird Course Of Applying Blown Or Residual Bitumen Applied Hot At 1.7 Kg. Per Sqm Of Area. D )       Ivth Course Of 400 Micron Thick Pvc Sheet. ( Overlaps At Joints Of Pvc Sheet Should Be 100 Mm Wide And Pasted To Each Other With Bitumen @ 1.7 Kg / Sqm. ) ( With 5 Years Service Guarantee ) 22.4 Providing And Placing In Position Suitable Pvc Water Stops Conforming To Is:12200 For Construction / Expansion Joints Between Two Rcc Members And Fixed To The Reinforcement With Binding Wire Before Pouring Concrete Etc. Complete ( With 5 Years Service Guarantee ) 22.4.1 Serrated With Central Bulb ( 225Mm Wide, 8- 11Mm Thick ) . 22.4.2 Dumb Bell With Central Bulb ( 180Mm Wide, 8Mm Thick ) . 22.4.3 Kickers ( 320Mm Wide, 5Mm Thick ) . 22.5 Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : A )   First Layer Of Slurry Of Cement @ 0.488 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. B )   Second Layer Of Slurry Of Cement @ 0.242 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. 22.6 Providing And Laying Water Proofing Treatment On Roofs Of Slabs By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : A )      After Surface Preparation, First Layer Of Slurry Of Cement @ 0.488 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg / Sqm. B )     Laying Second Layer Of Fibre Glass Cloth When The First Layer Is Still Green. Overlaps Of Joints Of Fibre Cloth Should Not Be Less Than 10 Cm. C )    Third Layer Of 1.5 Mm Thickness Consisting Of Slurry Of Cement @ 1.289 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.670 Kg / Sqm And Sand @ 1.289 Kg / Sqm. This Will Be Allowed To Air Cure For 4 Hours Followed By Water Curing For 48 Hours. The Entire Treatment Will Be Taken Upto 30Cm On Parapet Wall And Tucked Into Groove In Parapet All Around. 22.7 Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: A )   Applying A Slurry Coat Of Neat Cement Using 2.75 Kg / Sqm. Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Including Adjoining Walls Upto 300Mm Height Including Cleaning The Surface Before Treatment. B )   Laying Brick Bats With Mortar Using Broken Bricks / Brick Bats 25 Mm To 115Mm Size With 50% Of Cement Mortar 1:5 ( 1 Cement : 5 Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 ( 1 Cement :5 Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. C ) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75Kg / Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge. D ) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 ( 1 Cement: 4 Sand ) Admixed With Water Proofing Compound Conforming To Is: 2645 And Approved By Engineer-In-Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3Mm Deep. E ) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test. All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In- Charge: ( With 5 Years Service Guarantee ) With Average Thickness Of 120Mm And Minimum Thickness At Khurra As 65 Mm. 22.8 Providing And Laying Four Courses Water Proofing Treatment With Bitumen Felt Over Roofs Consisting Of First And Third Courses Of Blown Bitumen 85 / 25 Or 90 / 15 Conforming To Is : 702 Applied Hot @ 1.45 Kg Per Square Metre Of Area For Each Course, Second Course Of Roofing Felt Type 3 Grade-I ( Hessian Based Self Finished Bitumen Felt ) And Fourth And Final Course Of Stone Grit 6Mm And Down Size Or Pea-Sized Gravel Spread At 6 Cubic Decimeter Per Square Metre Including Preparation Of Surface But Excluding Grading Complete With : ( With Five Years Service Gurantee ) . Bitumen Felt ( Hessian Base ) Type 3 Grade I Conforming To Is: 1322. 22.9 Providing And Laying Six Courses Water Proofing Treatment With Bitumen Felt Over Roofs Consisting Of First, Third And Fifth Course Of Blown Bitumen 85 / 25 Or 90 / 15 Conforming To Is : 702 Applied Hot @ 1.45, 1.20 And 1.45 Kg Per Square Metre Of Area Respectively, Second And Fourth Courses Of Roofing Felt Type 3 Grade I Conforming To Is : 1322 ( Hessian Based Self Finished Bitumen Felt ) Conforming To Is : 1322 And Sixth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Dm Per Sqm Including Preparation Of Surface But Excluding Grading, Complete. ( With Five Years Service Gurantee ) . 22.10 Providing And Laying Six Courses Water Proofing Treatment With Bitumen Felt Over Roofs Consisting Of First, Third And Fifth Courses Of Blown Or / And Residual Bitumen Applied Hot At 1.45, 1.20 And 1.70 Kg Per Square Metre Of Area Respectively, Second And Fourth Courses Of Roofing Felt Type 2 Grade I ( Fibre Base Self Finished Bitumen Felt ) Six And Final Courses Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6Cu.Dm Per Sqm Including Preparation Of Surface, Excluding Grading, Complete. ( With Five Years Service Gurantee ) . 22.11 Providing And Laying Six Courses Water Proofing Treatment With Bitumen Felt Over Roofs Consisting Of First, Third And Fifth Courses Of Blow Or / And Residual Bitumen Applied Hot At 1.45, 1.20 And 1.70 Kg Per Square Metre Of Area Respectively, Second And Fourth Courses Of Roofing Felt Type 2 Grade Ii ( Glass Fibre Base Self Finished Bitumen Felt ) And Sixth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Dm Per Sqm Including Preparation Of Surface But Excluding Grading, Complete. ( With Five Years Service Gurantee ) 22.12 Deduct For Omitting In Water Proofing Treatment Final Course Of Spreading Stone Grit 6Mm Down Size Or Pea Sized Gravel At 6 Cudm Per Sqm. 22.13 Supplying And Applying Bituminous Solution Primer On Roof And Or Wall Surface At 0.24 Litre Per Sqm. 22.14 Grading Roof For Receiving Water Proofing Treatment With 22.14.1 Cement Concrete 1:2:4 ( 1 Cement : 2 Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 22.14.2 Cement Mortar 1:3 ( 1 Cement : 3 Sand ) 22.14.3 Cement Mortar 1:4 ( 1Cement : 4 Sand ) 22.15 Providing And Laying Insitu Six Course Water Proofing Treatment With App ( Atactic Poly- Propylene ) Modified Polymeric Membrane Over Roof Consisting Of First Coat Of Bitumen Primer @ 0.40Kg Per Sqm, Conforming To Is : 702, 3Rd And 5Th Layers Of Roofing Membrane App Modified Polymeric Membrane 1.5Mm Thick Of 2.25 Kg / Sqm Weight Consisting Of Five Layers Prefabricated With Centre Core As 20Micron Hmhdpe Film Sandwiched On Both Sides With Polymeric Mix And The Polymeric Mix Is Protected On Both Side With 20 Micron Hmhdpe Film. ( With 5 Years Service Guarantee ) 22.16 Providing And Laying In Situ Four Course Water Proofing Treatment With App ( Atactic Polypropylene ) Modified Polymeric Membrane Over Roof Consisting Of First Coat Of Bitumen Primer @ 0.40Kg Per Sqm, Conforming To Is : 702, 3Rd Layer Of Roofing Membrane App Modified Polymeric Membrane 2.0Mm Thick Of 3.00 Kg / Sqm Weight Consisting Of Five Layers Prefabricated With Centre Core As 100Micron Hmhdpe Film Sandwiched On Both Sides With Polymeric Mix And The Polymeric Mix Is Protected On Both Side With 20Micron Hmhdpe Film. ( With 5 Years Service Guarantee ) . 22.17 Providing And Laying In Situ Six Course Water Proofing Treatment With App ( Atactic Polypropylene ) Modified Polymeric Membrane Over Roof Consisting Of First Coat Of Bitumen Primer @ 0.40Kg Per Sqm, Conforming To Is : 702, 3Rd And 5Th Layers Of Roofing Membrane App Modified Polymeric Membrane 2.0Mm Thick Of 3.00 Kg / Sqm Weight Consisting Of Five Layers Prefabricated With Centre Core As 100 Micron Hmhdpe Film Sandwiched On Both Sides With Polymeric Mix And The Polymeric Mix Is Protected On Both Side With 20Micron Hmhdpe Film. ( With Five Years Service Gurantee ) . 22.18 Providing And Fixing App ( Atactic Polypropylene Polymer ) Modified Prefabricated Five Layer 2Mm Thick Water Proofing Membrane For Corrugated Roof Sheets, Black Finished Reinforced With Glass Fibre Matt Consisting In Longitudinal And Transverse Direction At 23°C As 350 / 300 N / 5Cm. Tear Strength In Longitudinal And Transverse Direction As 60 / 80N. Softening Point Of Membrane Not Less Than 150°C. Cold Flexibility Shall Be Upto -2°C When Tested In Accordance With Astm, D - 5147. The Laying Of Membrane Shall Be Got Done Through The Authorised Applicator Of The Manufacture Of Membrane. ( With Five Years Service Gurantee ) . 22.19 Providing And Laying App ( Atactic Polypropylene Polymer ) Modified Prefabricated Five Layer, 3Mm Thick Water Proofing Membrane, Black Finished Reinforced With Glass Fibre Matt Consisting Of A Coat Of Bitumen Primer Of The Membrane Shall Be As Under:Joint Strength In Longitudinal And Transverse Direction At 23°C As 350 / 300 N / 5Cm. Tear Strength In Longitudinal And Transverse Direction As 60 / 80N. Softening Point Of Membrane Not Less Than 150°C. Cold Flexibility Shall Be Upto -2°C When Tested In Accordance With Astm, D - 5147. The Laying Of Membrane Shall Be Got Done Through The Authorised Applicator Of The Manufacturer Of Membrane : ( With 5 Years Service Guarantee ) 22.20 Providing And Laying App ( Atactic Polypropylene Polymer ) Modified Prefabricated Five Layer 3Mm Thick Water Proofing Membrane, Black Finished Reinforced With Non-Woven Polyester Matt Consisting Of A Coat Of Bitumen Primer For Bitumen Membrane @ 0.40 Ltr / Sqm. By The Same Membrane Manufacture Of Density At 23°C As 650 / 450N / 5Cm. Tear Strength In Longitudinal And Transverse Direction As 300 / 250N. Softening Point Of Membrane Not Less Than 150°C. Cold Flexibility Shall Be Upto -2°C When Tested In Accordance With Astm, D - 5147. The Laying Of Membrane Shall Be Got Done Through The Authorised Applicator Of The Manufacturer Of Membrane: ( With 5 Years Service Guarantee ) . 22.21 Extra For Covering Top Of Membrane With Geotextile, 120Gsm Non Woven, 100% Polyester Of Thickness 1 To 1.25Mm Bonded To The Membrane With Intermittent Touch By Heating The Membrane By Butane Torch As Per Manufactures Recommendation. [ For Item No. 22.18 To 22.20 ] 22.22 Water Proofing Treatment Over Roof, Wall, Chajjas, , Balcony With Fibre Glass Mesh And Sealer Coat At Leakage / Seepage Area Consisting Of ( I )    Surface Preparation Roughening Of Surface, Opening Cracks In ‘V’ Groove In Size Of 5Mmx10mm ( Wxd ) , Filling Of Cracks With Putty With Laying Fiber Glass Mesh, Cleaning Of Surface By Scrubbing With Steel Wire / Nylon Brush. Removing All Dust Particles And Washing With Adequate Water To Clean Completely. ( Ii )      Providing And Applying 1St Coat Of Fibre Glass Mesh ( Minimum Thicknes 70-80 Micron ) And Two Component Flexible Waterproof And Protective Modified Mortar, Dry Powder 80% Chemical 20% Acrylic Resin Having 30% Solid Contents ) With Mix Proportion Of Part 1 And 2 With Proper Mixing With Laying Of Fiber Glass Mesh ( Of Weaving Size Of 10X10 Yarn / Inch Duly Coated With Alkaline Resistant Polymer ) . Allow The Coating To Air Cure For Minimum 2 Hrs. After Two Hours Of 1St Coat Applying 2Nd Coat ( Minimum Thickness 100 Micron ) Of Fibre Glass Mesh Of With Mix Proporation Of Part 1 And 2 With Proper Mixing. Allow The Coating To Air Cure For Minimum 2 Hrs. Consumption Of Two Component Should Be Acrylic Resin @17.90 Kg For 10 Sqm Area Or As Per Manufacture Instructions. ( After Two Coats Of Diamond Shield, Surface Is To Be Cured Properly Minimum For 4 Hrs. Before Application Of Third Coat ) . ( Iii ) Providing And Applying 1St Coat Of Sealer Coat 50-60 Micron ( Single Component Hight Build Elastomeric, Fixable Pure Acrylic Waterproofing Membrane Having Solid Content Of 65% ) And Allow It To Air Cure For 4Hrs. Minimum. After Two Hours Minimum Of 1St Coat Applying 2Nd And Finals Coat 120-140 Micron Of Sealer Coat And Allow It To Air Cure For 4 Hrs Mimimum. Consumption Of Sealer Coat Should Be @ 5.40 Kg Per 10 Sqm Area. ( Iv ) The Treated Area Should Be Cure With Water For 48 Hrs. By Flooding The Surface. ( V ) The Final Appearance Of The Coating Will Be Milky White. All Above Operations To Be Done In Order. ( Five Years Guarantee ) 22.23 Providing Water Proofing Treatment Over Roof, Wall, Chhajjas, Balcony With Rubberized Elastomeric Cold Applied Liquid Waterproofing Membrane Blend Of Special Resin And Rubber With More Than 1300% Elongation ( Confirming Astm-D2370-98 ) , At Leakage / Seepage Area Consisting Of The Following Operation. ( I ) Removal Of Damaged Waterproofing Treatment If Any Like Bituminous Membrane / Plaster / Brick Bat Koba / Screeding Etc. ( Ii ) Surface Preparation: Roughening Of Surface By Scrubbing With Steel Wire / Nylon Brush / Removing All Dust Particles And Washing With Adequate Water To Clean Completely, Opening Of Cracks In V Groove In Size Of 5Mm X 10M ( Wxd ) , Filling Of Cracks With Elastomeric Creak Filler / Pu Sealent Repair Of Potholes And Holor Making On Roof Surface By Polymer Mortar With Adding Sbr Bonding Agent. ( Iii ) Providing And Applying 1St Coating Of Rubberized Elastomeric Liquid Membrane As Primer ( Ratio 1:2 1 Part Liquid Membrane And 2 Part Water ) By Brush / Roller / Spray Having Minimum Thickness Of 70-80 Micron. Allow The Coating To Set In Natural Air For Minimum 2 Hrs, Then Put Reinforcement By Laying 45Gsm Fibre Glass Mesh And Applying 2Nd Coat Of Rubberized Elastomeric Liquid Membrane ( Ratio: 1 Part Membrane And 20% Water ) With Minimum Thickness 100-120 Micron. Allow The Coating To Set In Natural Air For Minimum 12 Hrs. ( Iv ) Providing And Applying 3Rd Coat Of Rubberized Elastomeric Liquid Membrane ( Ratio: 1 Part Membrane And 10% Water ) . Total Dft ( Dry Film Thickness ) Thickness After 3Rd Coat Must Be 280-300 Micron And Consumption In Three Coats @ 6.5Kg For 10Sqm. ( V ) Providing And Applying 4Th And 5Th Coat Of High Quality Waterproof Membrane In White Colour, Single Component Special Synthetic Resin Based Flexible Thixotropic White Color Coating With Excellent Uv Resistance ( Sri - 144 ) With More Than 300% Elongation ( Confirming Astm D 412-98 ) In Ratio: 1 Part Membrane And 10% Water Thickness Of 200 Micron Dft In Two Coats, With Average Consumption @ 5Kg Per 10 Sqm. After Application Of Fourth Coat Let It Air Dry For Minimum 3 Hrs Before Application Of Fifth Coat. ( Vi ) The Treated Area Must Be Tested For Water Leakage / Seepage By Flooding With Water For 48 Hrs ( Vii ) Application Of Membrane Coating Shall Be Got Done By Authorized Applicator Of Manufacturer. ( Viii ) 5 Years Of Service Guarantee To Be Provided. All Above Operations To Be Done In Order As Per Direction On Engineer-In-Charge. 22.24 Supplying And Applying Fibre Reinforced, Uv Resistant Elastomeric Liquid Applied Waterproofing & Heat Reflective Coating Coating With Pu Hybrid Polymers & Acrylic Fibers. The Coating Shall Resist 10 Bars Of Water Pressure As Per Din 1048 Standards, With Elongation Of 350% As Per Astm D412 & Crack Bridging Of Upto 2.5Mm Conforming To Asnz Standard. The Operation Shall Be Carried Out After Scrapping And Properly Cleaning The Surface To Remove Loose Particles With Wire Brushes, Complete In All Respect As Recommended By The Manufacturer’S Specification And As Per The Direction Of Engineer-In-Charge. 22.25 Supplying And Applying Two Component Elastomeric Acrylic Polymer Modified Cementitious Waterproofing Coating, Having 80% Elongation As Per Astm D412, Resisting 5 Bars Hyrostatic Pressure As Per Din 1048, Reduction To Rapid Chloride Shall Be 70 As Per Din 1048, Crack Bridging Upto 1.2Mm As Per Astm 4548.5. The Coating Shall Have Food Grade Certificate From Laboratories Like Cftri. The Mixing Ratio Of The Coating Shall Be 2 Parts Of Powder & 1 Part Of Liquid Without Any Water Addition In The Mixing, Etc., Complete As Per Manufacturers Specifications And As Per Direction Of Engineer-In-Charge. 22.26 Providing And Applying Uv Stable Polyurethane Liquid Water Proofing Membrane Having Sun Reflectivity Index ( Sri ) Of 106 On Top Of Concrete Roof / Retainning Wall / Old Layer Of Bituminous Surfaces / Polyurethane Foam And Metal Surfaces In Three Or More Coats @20Kg / 10 Sqm Consisting Of A Coat Of Two Component Epoxy Primer In Ratio Of 1:3 ( One Part Of Resin And 3 Parts Of Hardner ) At A Consumption Of 2Kg / 10Sqm. The Vital Physical And Chemical Parameters Shall Be As Under : Min Elongation At Break Of 600% As Per Astm D412 And Tensile Strength Of 3.0 N / Mm2 As Per Astm D412. The Operation Shall Be Carried Out After Scrapping And Properly Cleaning The Surface To Remove Loose Particles With Wire Brushes, Complete In All Respect As Recommended By The Manufacturer’S Specification And Direction Of Engineer-In-Charge. 22.27 Supplying & Installing Waterproofing Treatment By Using 1.2 Mm Thick Hdpe Membrane Before Casting Of The Base Rcc Slab. The Pre-Applied Membrane Gets Bonded To The Underneath Of The Poured Concrete Used As Base Slab. The Membrane Shall Consist Of A Thick Hdpe Film, A Highly Aggressive Pressure Sensitive Adhesive And Weather Resisting Coating Which Bonds Integrally To Poured Concrete Of Base Slab. The Membrane Shall Conforms To Basement Waterproofing Protection To Grades 2, 3 & 4 As Defined In Bs 8102:2009. The Waterproofing Membrane Shall Have Following Minimum Properties: A )     Resist Hydrostatic Pressure Of Up To 70 M Head Of Water As Per Astm D5385; B )       Puncture Resistance Of 950 N ( As Per Astm E154 ) C )       Elongation Of >400 % ( As Per Astm D412 ) D )     Peel Strength Of Concrete: >1500 N / M ( As Per Astm D903 ) E )       Tensile Strength Of 28.2 Mpa ( As Per Astm D412 ) . 22.28 Providing And Applying 2.0 Mm Thick Twin Colour Flexible Pvc Waterproofing Membrane. Flexibility Under Low Temperatures As Per En 495-5 Should Be < - 20Degc. On All Horizontal Surfaces Geotextile 300 Gsm To Be Laid Over Pcc, Than Laying Pvc Membrane Over Geotextile And To Be Sealed With Hot Air Welding Method At All Joints And Over Pvc Membrane Provide 300 Gsm Geotextile Then Protection Screed Of Suitable Thickness. On All Vertical Surfaces Geotextile 300 Gsm To Be Laid Along With Vertical Wall, Than Laying Pvc Membrane Over Geotextile And To Be Sealed With Hot Air Welding Method At All Joints And Over Pvc Membrane Providing Protection Layer Of Drain Board Hdpe Dimple Sheet Before Back Filling Of Soil. 22.29 Providing And Applying Waterproofing & Heat Reflecting Roof Coating With 100% Acrylic Elastomeric Polymers. Contains 30% Volume Solid, Tensile Strength 8 Kg / Cm², Crack Bridging, Voc 30 ± 5 Gm / Ltr Upto 2 Mm. Then Applying Two Coats With Forced Coverage Of 20 Sqft / Ltr / Two Coats. The Operation Shall Be Carried Out After Scrapping & Propely Clening The Surface To Remove Loose Particles With Wire Brush / Jet Washer. Apply 1 Coat @1 Ltr / 10 Sqm & 3 Undiluted Coats @ 8 Ltr / 10 Sqm With 4 Hrs Interval Of Each Coat.The Work Shall Be Carried Out As Recommended By The Manufacturer’S Specification & The Direction Of The Engineer- In-Charge. 22.30 Providing & Applying Crack Fill Paste For Crack Filling Up To 5 Mm Cracks.Widen The Crack By Putty Knife In V / U Shape & Apply 1St Priming Coat Of Crack Fill Paste Diluted With Water In 1:1 Proportion Over The Crack By Brush. Apply 2Nd Coat With Filling Of Crack Fill Paste When The Surface Is Tacky But Not Dried Completely With Putty Knife & Spatula.After 4 Hours Of Application 2Nd Coat Apply 3Rd Coat Of Crack Fill Paste. The Work Shall Be Carried Out As Recommended By The Manufacturer’S Specification & The Direction Of The Engineer-In-Charge 22.31 Providing & Applying Single Pack Component, Solvent-Free, Cold Applied, Polyurethane Modified, Elastomeric Liquid Applied Waterproofing Membrane- Pu Coat With Excellent Uv Resistant Capacity, The Material Shall Meet The Requirement As Specified In Astm D2370-98 Of Elongation At Break Of Film>350% With Geotextile Fleece =50% Approx.The Work Shall Be Carried Out As Recommended By The Manufacturer’S Specification & The Direction Of The Engineer- In-Charge. The Product Performance Shall Carry Guaranteed For 5 Year Against Any Leakage. 22.31.1 For Horizontal Surface ( With Geotextile Fleece ) Two Coats Without Dilution & 1 Self Priming Coat- 50% Dilution With Water @ 10 Kg / M2 22.31.2 For Horizontal Surface ( Without Geotextile Fleece ) Two Coats Without Dilution & 1 Self Priming Coat- 50% Dilution With Water @ 10 Kg / M2 22.32 Providing And Mixing Integral Crystalline Admixture For Water Proofing Treatment To Rcc Structures Like Basement Raft, Retaining Walls, Reservior, Sewage & Water Treatment Plant, Tunnels / Subway And Compared With Control Concrete As Per Din 1048 And Resistant To 16 Bar Hydrostatic Pressure. The Crystalline Admixture Shall Be Capable Of Self-Healing Of Cracks Up To A Width Of 0.50Mm. The Work Shall Be Carried Out All Complete As Per Specification And The Direction Of The Engineer-In-Charge. The Product Performance Shall Carry Guarantee For 10 Years Against Any Leakage. 22.33 Providing And Applying Integral Crystalline Slurry Of Hydrophilic In Nature For Waterproofing Treatment To The Rcc Structures Like Retaining Walls Of The Basement, Water Tanks, Roof Slabs, Podiums, Reservior, Sewage & Water Treatment Plant, Tunnels / Subway And Bridge Deck Etc. The Material Shall Meet The Requirements As Specified In Aci- 212-3R-2010 I.E By Reducing Permeability Of Concrete By More Than 90% Compared With Control Concrete As Per Din 1048 And Resistant To 16 Bar Hydrostatic Pressure On Positive Side. The Crystalline Slurry Shall Be Capable Of Self- Healing Of Cracks Up To A Width Of 0.50Mm. The Work Shall Be Carried Out All Complete As Per Specification And The Direction Of The Engineer-In-Charge. The Product Performance Shall Carry Guarantee For 10 Years Against Any Leakage. 22.33.1 For Vertical Surface Two Coats @ 0.70 Kg Per Sqm 22.33.2 For Horizontal Surface One Coat @1.10 Kg Per Sqm. 22.34 Providing And Applying Integral Crystalline ( Dry Shake ) Of Hydrophilic In Nature For Waterproofing Treatment To The Rcc Structures Like Basement Raft, Foundation Slab, Sewage & Water Treatment Plant Slab, Warehouses Floor, Parking Structures And Water Tank Base Slab Etc. Crystalline Dryshake Shall Be Capable Of Self-Healing Of Cracks Up To A Width Of 0.50Mm. The Work Shall Be Carried Out All Complete As Per Specification And The Direction Of The Engineer-In-Charge. The Product Performance Shall Carry Guarantee For 10 Years Against Any Leakage. 22.35 Providing And Applying Crystalline Mortar By Mixing In The Ratio Of 4.5 : 1 ( 4.5 Parts Crystalline Mortar : 1 Part Water ) For The Treatment Of Faulty Construction Joints, Cracks, Tie Rod Holes And Spalled & Honeycombed Surface Of Rcc Underground Structures Like Basement, Water Tanks, Bridge Deck Etc. To Ensure Water Tightness. The Crystallie Mortar Shall Conform To The En 1504-3 Having Compressive Strength Class R4 > 45 Mpa And Adhesive Bond Strength Class R3 > 1.5 Mpa. The Work Shall Be Carried Out All Complete As Per Specification And The Direction Of The Engineer-In-Charge.The Product Performance Shall Carry Guarantee For 10 Years Against Any Leakage. 22.35.1 For Sealing Cracks And Faulty Construction Joints, Routed Out / Making U-Shape Groove Size 25X25mm And Then Primed The Area With Integral Crystalline Slurry @0.05Kg / Running Metre And While The Surface Is Tacky Filled The Groove Upto Surface With Crystalline Mortar @1.50Kg / Running Metre. Once Crystalline Mortar Is Touch Dry Then Finally Applied Two Coats Of Integral Crystalline Slurry @0.05Kg / Running Metre Per Coat. 22.35.2 For Patching Of Tie Rod Holes, Prepared Tie Rod Hole Surface And Then Primed The Area With Integral Crystalline Slurry @ 0.070 Kg / Sqm And While The Surface Is Tacky Repair And Then Filled The Tie Rod Holes With Crystalline Mortar @ 0.040 Kg Per Hole. The Crystalline Mortar Should Be Tightly Rodded Into Tie Rod Holes Or Packed Tightly ( For 25X25x25 Mm Tie Rod Hole, Use 0.040 Kg To Fill The Hole ) 22.36 Providing And Applying Of Swellable Type Water Stop Tape, 19Mm X 25Mm Thick In Linear Meter ( Expansive Nature ) For Construction Joints Treatment Of Rcc Structure Such As Raft Slab, Retaining Walls, Water Storage Tank And At The Junctions Of Raft Slab With The Retaining Walls Etc. After Cleaning The Surface, One Coat Of Required Primer For Swellable Water Stop Tape Shall Be Applied Throughout The Length Of The Joint @3.78 Litre Per 240 Running Meter. Over The Primed Surface Swellable Type Water Stop Tape Shall Be Placed. The Work Shall Be Carried Out All Complete As Per Specification And The Direction Of The Engineer-In-Charge. The Product Performance Shall Carry Guarantee For 10 Years Against Any Leakage. 22.37 Providing And Applying Waterproofing Treatment In Bathroom Or Tiled Balcony Area Without Breaking Or Removing Tiles, By Using Waterproofing Sheets As Per Manufacturers Data Sheet Instructions. Permitting Use Of Bathroom / Balcony After 24 Hours Of Application Of Treatement, Complete With Materials And Labour And Gurantee Of Leakage For A Period Of 5 Year. 23.11 Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc ( Poly Vinyl Flooring ) En ( European Standard ) , Total Weight Is 3250 G / M2, Approx. Pur ( Polyurethane Reinforced ) , Abrasion Group P: ≤2.00 Mm, Residual Indentation Approx. 0.03 Mm, Anti-Bacterial And Fungal Resistance, Castor Wheel Test Qualified, Dimensional Phthalate Free, Directional In Design.The Floor Finish Should Be Termite Free At The Room Perimeter Passing Over A Concealed Cove Forming And Continuing Up On The Wall Upto 100Mm.Recommended To Use In Area Like Icu , Post Operative, Recovery Rooms, Opd, Patient Rooms, Corridors , Passages Etc. 23.12 Providing And Fixing Permanently Static Dissipative Pressed Homogeneous Conductive Pvc ( Poly Vinyl Flooring ) En ( European Standard ) , Anti Static, Wear Layer Thickness Is 2Mm ( En429 ) , Vinyl Flooring Having Carbon Backing With Total Weight 3000 G / M2 Esd Approved, Restorable Properties, Available In Rolls. 100% Recyclable ( Eco - Freindly ) . Low Voc Emission After 28Days Of Installation ( Lower Than ≤100Μg / M3 ) , Phthalate Free Non-Directional In Design. Recommended To Use In Area Like Operation Theater, Icu, Server Room, Etc. 23.13 Providing And Fixing 0.92Mm Thick Hetrogeneous Compact Pvc ( Poly Vinyl Wall Covering ) For Interior Wall Area, With Wear Layer Thickness 0.12Mm Of Pvc, En ( European Standard ) Total Weight Is 1500 G / M2, Approx Pur ( Polyurethane Reinforced ) , Good Resistance To Chemical And Fire, Doesn’T Favour In Growth Of Fungi And Bacterial, 100% Recyclable ( Eco-Freindly ) , Low Voc Emissions After 28 Days Of Installation ( Lower Than ≤10Μg / M3 ) , Phthalate Free, Directional In Design, The Wall Finish Should Termite Free At The Room Perimeter. Recommended To Use In Area Like Ot, Icu, Corridors, Patient Room Etc. 23.14 Providing And Fixing 1.3Mm Thick Homogeneous Pvc ( Poly Vinyl Wall Covering ) For Interior Area With Wear Layer Thickness 1.3 Mm Of Pvc, En ( European Standard ) Total Weight Is 2100 G / M2, Approx. Pur ( Polyurethane Reinforced ) , Good Resistant To Chemical And Fire, Doesn’T Favour In Growth Of Fungi And Bacterial, 100% Recyclable ( Eco-Freindly ) , Low Voc Emissions After 28Days Of Installation ( Lower Than ≤10Μg / M3 ) , Phthalate Free, Directional In Design.The Wall Finish Should Termite Free At The Room. Recommended To Use In Area Like Ot.Icu, Corridors, Passages , Patient Room Etc 23.15 Supply And Installation Of 2Mm Thick Homogeneous Vinyl Flooring, Highest Abrasion Wear Rating Group T ( En660 ) , Binder Content Exceeds 55% Of The Flooring Composition, No Waste Technology, Consisting Of Pvc Resin, Plasticizers And Stabilizers, Type I. Flooring ( ( En Iso 23997 ) Max 0.4%, Abrasion Group ( Msz En 660-1 ) T, Fire Resistance En 13501-1 Bf1-S1, Slip Resistance Din 51130 R9, En 13893 Ds, Electrical Resistance En 1815 <2 Kv, Chemical Resistance En Iso 26987, Castor Chair Resistance En Iso 4918, Hygenie Bacterial Resistant, Seaming Method - Hot Welding, Finishing Complete . Recommended To Use In Area Like Operation Theater, Icu, Server Room, Etc. 24.8 Supplying And Installation Of Moisture Resistant / Fire Resistant 6 Mm Thick Heavy Duty Fiber Cement Board ( High Pressure Steam Cured ) Conforming To Is 14862:2000 Of Category Iii Type B As Per Standard Sizes Fixed With Self- Drilling / Taping Screws. Screws Shall Be Of Counter Sunk Rib Head Of 1.60Mm To 4 Mm Thick Of 8 To 10 Gauge Of Length Varying From 25 To 45 Mm. 24.9 Providing And Fixing Thermal Insulation With Resin Bonded Glass Wool Conforming To Is: 8183, Having Density 48 Kg / M3. 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags Fixed To Wall With Screw, Rawl Plug And Washers And Held And In Position By Crisscrossing Gi Wire Etc. Complete As Per Directions Of Engineer-In-Charge. 24.9.1 Providing And Fixing Insulation With Resin Bonded Glass Wool 24.9.2 Providing And Fixing Insulation With Resin Bonded Rock Wool 24.11 Providing And Fixing Precoatedgalvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm + 0.05 %, Total Coated Thickness With Zinc Coating 120 Gsmlength Upto 12 Metre Or As Desired By Engineer-In- Charge. The Sheet Shall Be Fixed Using Self-Drilling / Self-Tapping Screws Of Size ( 5.5X 55Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 24.12 Providing And Fixing Precoatedgalvanised Steel Sheet Roofing Accessories 0.50 Mm + 0.05 % Total Coated Thickness, Zinc Coating 120Gsm As Per Is: 277 In 240 Mpa Steel Grade, 5- 7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self-Drilling / Self-Tapping Screws Complete : 24.12.1 Ridges Plain ( 500 - 600Mm ) . 24.12.2 Flashings / Aprons. ( Upto 600 Mm ) 24.12.3 North Light Curves. 24.12.4 Barge Board ( Upto 300 Mm ) . 24.12.5 Crimp Curve 24.12.6 Gutter. ( 600 Mm Over All Girth ) . 25.1 Providing And Fixing White Vitreous China Anti Germ Fluoro-Polymer Coated Water Closet Squatting Pan With 100 Mm Sand Cast Iron P And S- Trap, And 7.2 Liter Low Level, Dual Flush, Pp ( Poly Propylene ) Made Open Slim Wall Hung Cistern Capacity 3 Liter / 6 Liter Flushing, With All Fittings And Fixtures Complete Including Cutting And Making Good The Wall And Floors Wherever Required. 25.1.1 White Vitreous China Anti Germ Fluoro-Polymer Coated Orissa Pattern W. C. Pan Of Size 260 X 440 X 580Mm With Integral Foot Rests. ( Premium Range ) 25.1.2 White Vitreous China Anti Germ Fluoro-Polymer Coated Orissa Pattern W. C. Pan Of Size 445 X 585 X 260 Mm With Integral Foot Rests. ( Premium Range ) 25.2 Providing And Fixing White Vitreous China Pedestal Type Anti Germ Fluoro-Polymer Coated Water Closet With Soft Closing Seat Cover, And 7.2 Litre Low Level Slim Dual Flushing, Pp ( Poly Propeline ) Made 80 Mm Thick Concealed Flushing Cistern, Flushing Capacity 3 Litre / 6 Litre, With All Fittings And Fixtures Complete Including Cutting And Making Good The Wall And Floors Wherever Required. 25.2.1 Anti-Germ Fluoro-Polymer Coated ( Nano Coating ) European W. C. With Solid Poly Propelyne Made Soft Closing Seat Cover ( Premium Range ) 25.2.2 Anti-Germ Fluoro-Polymer Coated Water Closet European Type W. C. Pan Size 350 X 480 X 390 Mm With Solid Poly Propelyne Made Soft Closing Seat Cover ( Premium Range ) 25.3 Providing And Fixing White Vitreous China European Wall Hung Anti Germ Fluoro-Polymer Coated Water Closet Of Approved Shape With Soft Closing Seat Cover, And 7.2 Litre Low Level Slim Dual Flushing, Pp ( Poly Propylene ) Made 80 Mm Thick Concealed Flushing Cistern, Flushing Capacity 3 Litre / 6 Litre, With All Fittings And Fixtures Complete Including Cutting And Making Good The Wall And Floors Wherever Required. 25.3.1 Anti Germ Fluoro-Polymer Coated ( Nano Coating ) Wall Hung Water Closet Size 350 X 360 X 545Mm With Solid Poly Propelyne Made Soft Closing Seat Cover ( Premium Range ) 25.3.2 Anti Germ Fluoro-Polymer Coated ( Nano Coating ) Wall Hung Water Closet Size 360 X 570 X 360Mm With Solid Poly Propelyne Made, Soft Closing Seat Cover ( Premium Range ) 25.3.3 Anti Germ Fluoro-Polymer Coated ( Nano Coating ) Wall Hung Water Closet Size 360 X 640 X 690Mm With Solid Poly Propelyne Made, Soft Closing Seat Cover ( Premium Range ) 25.3.4 Anti Germ Fluoro-Polymer Coated ( Nano Coating ) Wall Hung Water Closet Size 360 X 535 X 380Mm Or Greater Size With Solid Poly Propelyne Made, Soft Closing Seat Cover ( Premium Range ) 25.4 Providing And Fixing White Vitreous China Anti Germ Fluoro-Polymer Coated Couple Water Closet Flushing Capacity 3 And 6 Litre Of Approved Shape With 15Mm Quarter Turn Angular Stop Cock And Pvc Connection Pipe I / C Cutting And Making Good The Wall And Floors Wherever Required With All Fittings And Fixtures Etc. Complete . 25.4.1 Anti Germ Fluoro-Polymer Coated Couple Water Closet Size 760 X 360 X 635Mm With Solid Poly Propelyne Made Soft Closing Seat Cover. ( Premium Range ) 25.4.2 Anti Germ Fluoro-Polymer Coated Couple Water Closet Size 405 X 730 X 800Mm With Solid Poly Propelyne Made Soft Closing Seat Cover. ( Premium Range ) 25.4.3 Anti Germ Fluoro-Polymer Coated Couple Water Closet Size 370 X 640 X 760Mm With Solid Poly Propelyne Made Soft Closing Seat Cover. ( Premium Range ) 25.4.4 Anti Germ Fluoro-Polymer Coated Couple Water Closet Size 375 X 650 X 800Mm With Solid Poly Propelyne Made Soft Closing Seat Cover. ( Premium Range ) 25.5 Providing And Fixing White Vitreous China Anti Germ Fluoro-Polymer Coated Single Piece W.C. Dual Flushing Capacity 3 And 6 Litre Of Approved Shape With 15Mm Quarter Turn Angular Stop Cock And Pvc Connection Pipe I / C Cutting And Making Good The Wall And Floors Wherever Required All Fittings And Fixtures Etc. Complete. 25.5.1 Anti Germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 770 X 375 X 695Mm With Solid Poly Propelyne Made Soft Closing Seat Cover. ( Premium Range ) 25.5.2 Anti Germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370 X 685 X 835Mm With Solid Poly Propelyne Made Soft Closing Seat Cover. ( Premium Range ) 25.5.3 Anti Germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 390 X 710 X 710Mm With Solid Poly Propelyne Made Soft Closing Seat Cover. ( Premium Range ) 25.5.4 Anti Germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 X 640 X 690Mm With Solid Poly Propelyne Made Soft Closing Seat Cover. ( Premium Range ) 25.6 Providing And Fixing White Vitreous China Made Anti Germ Fluoro-Polymer Coated Extended Wall Hung Type Couple Closet Along With Dual Flushing Cistern Flushing Capacity 3 & 6 Litre Approved Shape With 15Mm Quarter Turn Angular Stop Cock And Pvc Connection Pipe I / C Cutting And Making Good The Wall And Floors Wherever Required All Fittings And Fixtures Etc. Complete. 25.6.1 Anti Germ Fluoro-Polymer Coated Extended Wall Hung Type Couple Closet Size 760X360x635mm With Solid Poly Propelyne Made Soft Closing Seat Cover ( Premium Range ) 25.6.2 Providing And Fixing White Vitreous China Made Anti Germ Fluoro-Polymer Coated Extended Wall Hung Type Couple Closet Size 365X635x770mm Along With Dual Flushing Cistern Flushing Capacity 3 & 6 Litre. ( Premium Range ) 25.7 Providing And Fixing White Vitreous China Type Anti Germ Fluoro-Polymer Coated Wash Basin With C.I. Brackets, 15 Mm C. P. Wall Mounted Pressmatic Pillar Cock Auto Closing System ( Decol Technology ) , 15Mm Quarter Turn Angular Stop Cock, 32 Mm C.P. Brass Made Waste Coupling Length 130Mm And 32 Mm C.P. Brass Made Bottle Trap Size 200X300mm Fittings And Fixtures Complete Including Painting Of Fittings And Cutting And Making Good The Wall And Floors Wherever Required. 25.7.1 White Vetrious China Anti Germ Fluoro-Polymer Coated Wash Basin Size 160X580x450 Mm With Basin Mounted Pressmatic Pillar Cock Auto Closing System ( Decol Technology ) . ( Premium Range ) 25.8 Providing And Fixing White Vitreous China Type Anti Germ Fluoro-Polymer Coated Counter Top Wash Basin With 15 Mm C. P. Wall Mounted Pressmatic Pillar Cock Auto Closing System ( Decol Technology ) , 32 Mm C.P. Brass Waste Coupling Length 130Mm And 32 Mm C.P. Brass Bottle Trap Size 200X300mm I / C Cutting And Making Good The Wall And Floors Wherever Required All Fittings And Fixtures Etc. Complete. 25.8.1 White Vetrious China Anti Germ Fluoro-Polymer Coated Wash Basin Size 190X600x435mm With Wall Mounted Pressmatic Pillar Cock Auto Closing System ( Decol Technology ) . ( Premium Range ) 25.8.2 Providing And Fixing White Vitreous China Type Anti Germ Fluoro-Polymer Coated Counter Top Wash Basin Size 570X415x200mm With 15 Mm C. P. Wall Mounted Pressmatic Pillar Cock Auto Closing System ( Decol Technology ) . ( Premium Range ) 25.9 Providing And Fixing White Vitreous China Type Anti Germ Fluoro-Polymer Coated Counter Top Wash Basin With 15 Mm C. P. Wall Mounted Single Lever Concealed Basin Mixture, ( Cartridge Size 32 Mm ) 32 Mm C. P. Brass Waste Coupling Length 130Mm And 32 Mm C. P. Brass Bottle Trap Size 200X300mm I / C Cutting And Making Good The Wall And Floors Wherever Required, All Fittings And Fixtures Etc. Complete. ( Premium Range ) 25.9.1 White Vetrious China Anti Germ Fluoro-Polymer Coated Wash Basin Size 190X600x435mm With Wall Mounted Single Lever Concealed Basin Mixture ( Cartridge Size 32Mm. ) ( Premium Range ) 25.9.2 Providing And Fixing White Vitreous China Type Anti Germ Fluoro-Polymer Coated Counter Top Wash Basin Size 600X400x175mm With 15 Mm C. P. Wall Mounted Single Lever Concealed Basin Mixture. ( Premium Range ) 25.10 Providing And Fixing White Vitreous China Type Anti Germ Fluoro-Polymer Coated Wash Basin With 15 Mm Table Mounted Single Lever Tall Boy Basin Mixture, ( Cartridge Size 32 Mm ) 15Mm Quarter Turn Angular Stop Cock, 32 Mm C. P. Brass Made Waste Coupling Length 130Mm And 32 Mm C.P. Brass Made Bottle Trap Size 200X300mm Fittings And Fixtures Complete Including Painting Of Fittings And Cutting And Making Good The Wall And Floors Wherever Required. 25.10.1 White Vetrious China Anti Germ Fluoro-Polymer Coated Wash Basin Size 190X600x435mm With Table Mounted Single Lever Tall Boy Basin Mixture, ( Cartridge Size 32Mm. ) ( Premium Range ) 25.10.2 White Vitreous China Type Anti Germ Fluoro- Polymer Coated Counter Top Wash Basin Size 510X400x135mm With Tall Boy Basin Mixture, ( Cartridge Size 32 Mm ) . ( Premium Range ) 25.11 Providing And Fixing White Vitreous China Flat Back Anti Germ Fluoro-Polymer Coated Urinal ( Inbuilt Spreaders, Bottle Trap And Ceramic Waste Coupling ) With 15Mm Brass Pressmatic Auto Closing Concealed Urinal Flush Valve With Wall Flange ( Decol Technology, 400000 Operation Warranted ) I / C Cutting And Making Good The Wall And Floors Wherever Required, All Fittings And Fixtures Etc. Complete . 25.11.1 White Vitreous China Anti Germ Fluoro-Polymer Coated Urinal Size 670 X 330 X325 Mm. ( Premium Range ) 25.11.2 White Vitreous China Anti Germ Fluoro-Polymer Coated Urinal Size 475 X 320 X 730 Mm. ( Premium Range ) 25.11.3 White Vitreous China Anti Germ Fluoro-Polymer Coated Urinal Size 375 X 315 X 620 Mm. ( Premium Range ) 25.12 Providing And Fixing White Vitreous China Flat Back Anti Germ Fluoro-Polymer Coated Urinal ( Inbuilt Spreaders, Inbuilt Bottle Trap And Inbuilt Ceramic Waste Coupling ) With Sensotronic Concealed Type Flushing Valve For Urinal Complete Set With Installation Box With Control Cock Complete Including Painting Of Fittings And Brackets, Cutting And Making Good The Wall And Floors Wherever Required . 25.12.1 White Vetrious China Anti Germ Fluoro-Polymer Coated Urinal Size 670 X 330 X325 Mm With Sensotronic Concealed Type Flushing Valve For Urinal Complete Set With Installation Box With Control Cock. ( Premium Range ) 25.12.2 White Vetrious China Anti Germ Fluoro-Polymer Coated Urinal Size 330 X 345 X 610 Mm With Concealed Sensotronic Flushing Valve For Urinal Complete Set With Installation Box, ( Premium Range ) 25.13 Providing And Fixing White Vitreous China Flat Back Anti Germ Fluoro-Polymer Coated Urinal ( Inbuilt Spreaders, Inbuilt Bottle Trap And Inbuilt Ceramic Waste Coupling ) With 15Mm Brass Made Pressmatic ( Decol Technology, 400000 Operation Warranted ) Concealed Flushing Stop Cock Complete Including Painting Of Fittings And Brackets, Cutting And Making Good The Wall And Floors Wherever Required . 25.13.1 White Vetrious China Anti Germ Fluoro-Polymer Coated Urinal Size 730 X 480 X310 Mm With 15Mm Brass Made Pressmatic Auto Closing Concealed Urinal Flush Valve With Wall Flange ( Decol Technology, 400000 Operation Warranted ) . ( Premium Range ) 25.14 Providing And Fixing White Vitreous China Flat Back Anti Germ Fluoro-Polymer Coated Urinal ( Inbuilt Spreaders, Inbuilt Bottle Trap And Inbuilt Ceramic Waste Coupling ) With Sensor Complete Including Painting Of Fittings And Brackets, Cutting And Making Good The Wall And Floors Wherever Required. 25.14.1 White Vetrious China Made Flat Back Anti Germ Fluoro-Polymer Coated Urinal ( Inbuilt Spreaders, Inbuilt Bottle Trap And Inbuilt Ceramic Waste Coupling ) Size 710 X 480 X300 Mm With Sensor ( Premium Range ) 25.14.2 Providing And Fixing White Vitreous China Flat Back Anti Germ Fluoro-Polymer Coated Urinal Size 710 X 310 X 485 Mm ( Inbuilt Spreaders, Bottle Trap And Ceramic Waste Coupling ) With Inbuilt Sensor For Flushing. ( Premium Range ) 25.15 Providing & Fixing 8Mm Thick Froasted Urinal Glass Partition Size 900X450mm Brass Made Bracket With Chrome Plating. ( Premium Range ) 25.16 Providing & Fixing 8Mm Thick Froasted Urinal Glass Partition Size Height 900 Mm Top Width 450Mm And Bottom Width 300Mm Brass Made Bracket With Chrome Plating. ( Premium Range ) 25.17 Providing & Fixing Plain Bath Tub Of Size 180X80x47cm Body Made Of Pmma ( Poly Methyl Metha Acrylate ) With 20Mm Wooden Reinforcement. ( Premium Range ) 25.18 Providing And Fixing In Position Best Indian ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Body Thickness 2Mm, Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) Pillar Cock. ( Premium Range ) 25.19 Providing And Fixing In Position Best Indian ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Body Thickness 2Mm, Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) Bib Cock. ( Premium Range ) 25.20 Providing And Fixing In Position Best Indian ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Body Thickness 2Mm, Nickel Plating. 10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) Angular Stop Cock. ( Premium Range ) 25.21 Providing And Fixing In Position Best Indian ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Body Thickness 2Mm, Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) Concealed Stop Cock. ( Premium Range ) 25.22 Providing And Fixing In Position Best Indian ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) Wall Mixer With 115Mm Bend. ( Premium Range ) 25.23 Providing And Fixing In Position Best Indian ( Bonut Size 24Mm, Ceramic Disc Size 19Mm, Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) 3-In1 Wall Mixer . ( Premium Range Sanitary Ware ) 25.24 Providing And Fixing In Position Best Indian C. P. Brass Made Quarter Turn ( Ceramic Disc Size 25Mm ) Flush Cock For Indian W. C. ( Orissa Pan ) . ( Premium Range ) 25.25 Providing And Fixing In Position Best Indian Single Lever Auto Mixing Wall Mixer ( Cartridge Size 40Mm, Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) For Shower Area Use Only. ( Premium Range ) 25.26 Providing And Fixing In Position Best Indian Single Lever Auto Mixing Basin Mixer ( Cartridge Size 32Mm, Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) For Wash Basin Area Use Only. ( Premium Range ) 25.27 Providing And Fixing In Position Best Indian Single Lever Auto Mixing Diverter ( Cartridge Size 47Mm, Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) For Shower Area Use Only. ( Premium Range ) 25.28 Providing And Fixing In Position Best Indian C. P. Brass Made Spout ( Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) . ( Premium Range ) 25.29 Providing And Fixing In Position Best Indian C. P. Brass Made Shower Arm Length 300Mm ( Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) . ( Premium Range ) 25.30 Providing And Fixing In Position Best Indian C. P. Brass Made Shower Arm Length 450Mm ( Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) . ( Premium Range Sanitary Ware ) 25.31 Providing And Fixing In Position Best Indian C. P. Brass Made Shower Arm Length 600Mm ( Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) . ( Premium Range Sanitary Ware ) 25.32 Providing And Fixing In Position Best Indian Shower Rose 300Mm Dia Body And Face Chrome Plated, Brass Made Body, Silicon Based Rubbit Cleaning Nozzles. ( Premium Range Sanitary Ware ) 25.33 Providing And Fixing In Position Best Indian Shower Rose 150Mm Dia, Body And Face Chrome Plated, Brass Made Body, Silicon Based Rubbit Cleaning Nozzles. ( Premium Range ) 25.34 Providing And Fixing In Position Best Indian Shower Rose 200Mm Dia Body And Face Chrome Plated, Brass Made Body, Silicon Based Rubbit Cleaning Nozzles . ( Premium Range ) 25.35 Providing And Fixing In Position Best Indian Shower Rose 240Mm Body And Face Chrome Plated, Brass Made Body, Silicon Based Rubbit Cleaning Nozzles. ( Premium Range ) 25.36 Providing And Fixing In Position Best Indian ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Body Thickness 2Mm, Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) 2- Way Bib Cock . ( Premium Range ) 25.37 Providing And Fixing In Position Best Indian Health Faucet With 8Mm Dia 1 Meter Long Flexible Tube And Wall Bracket With N. R. V. ( Non-Return Wall ) . ( Premium Range Sanitary Ware ) 25.38 Providing And Fixing In Position Best Indian Auto Closing Pillar Cock ( With Decol Cartridge ) For Wash Basin Use. ( Premium Range ) 25.39 Providing And Fixing In Position Best Indian Auto Closing Bib Cock ( With Decol Cartridge ) For Common Area Use. ( Premium Range ) 25.40 Providing And Fixing In Position Best Indian Auto Closing Urinal Valve Open Type ( With Decol Cartridge ) For Urinal Use Only. ( Premium Range ) 25.41 Providing And Fixing In Position Best Indian Auto Closing Urinal Valve Concealed Type ( With Decol Cartridge ) For Urinal Use Only. ( Premium Range ) 25.42 Providing And Fixing In Position Best Indian Auto Closing Wall Mounted Pillar Cock ( With Decol Cartridge ) For Wash Basin Use Only. ( Premium Range ) 25.43 Providing And Fixing In Position Best Indian Auto Closing 40Mm Flush Valve ( For W. C. European And Wall Hung Type ) Concealed Type ( With Decol Technology / Cartridge ) . ( Premium Range ) 25.44 Providing And Fixing In Position Best Indian Auto Closing 40Mm Dual Flow ( 3.0 / 6.0 Liter ) Flush Valve ( For W. C. European And Wall Hung Type ) Concealed Type ( With Decol Technology / Cartridge ) . ( Premium Range ) 25.45 Providing And Fixing In Position Best Indian Auto Closing 32Mm, Flush Valve ( For W. C. European And Wall Hung Type ) Concealed Type ( With Decol Technology / Cartridge ) . ( Premium Range ) 25.46 Providing And Fixing In Position Best Indian Sensotronic Sensor Faucet For Wash Basin Use Only. ( Premium Range ) 25.47 Providing And Fixing In Position Best Indian Sensotronic Sensor Faucet For Urinal Use Only. ( Premium Range ) 25.48 Providing And Fixing In Position Best Indian Sensotronic Sensor Concealed Type Faucet For Wall Mounted Water Closet Use Only. ( Premium Range ) 25.49 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Single Towel Rail 300 Mm Long. ( Premium Range ) 25.50 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Single Towel Rail 600 Mm Long. ( Premium Range ) 25.51 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Swivel Towel Holder Twin Type. ( Premium Range ) 25.52 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Single Towel Ring Square. ( Premium Range ) 25.53 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Soap Dish Holder. ( Premium Range ) 25.54 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Soap Dispenser With Metallic Bottle. ( Premium Range ) 25.55 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Tumbler Holder. ( Premium Range ) 25.56 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Toilet Paper Holder With Flap. ( Premium Range ) 25.57 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Toilet Roll Holder. ( Premium Range ) 25.58 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Glass Self-Size 600Mm With Toughened Glass ( Premium Range ) 25.59 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Double Coat Hook. ( Premium Range ) 25.60 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) Towel Rake 600 Mm. ( Premium Range ) 25.61 Providing And Fixing In Position Best Indian C. P. Brass Made ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) W. C. Brush Holder. ( Premium Range ) 25.62 Providing & Fixing 8Mm Thick Froasted Urinal Glass Partition Size 900X450mm Brass Made Bracket With. ( Premium Range ) 25.63 Wall Hung Basin: Providing And Fixing White Vitreous China Type Anti Germ Fluoro-Polymer Coated Wall Mounted Wash Basin With C.I. Brackets, C. P. Brass Single Lever Basin Mixer, 15Mm Quarter Turn Angular Stop Cock, 32 Mm C.P. Brass Waste Coupling Length 130Mm And 32 Mm C.P. Brass Bottle Trap Size 200X300mm I / C Cutting And Making Good The Wall And Floors Wherever Required, All Fittings And Fixtures Etc. Complete . ( Premium Range ) 25.63.1 White Vetrious China Anti Germ Fluoro-Polymer Coated Wall Mounted Wash Basin Size 550X400x200 Mm. ( Premium Range ) 25.63.2 White Vetrious China Anti Germ Fluoro-Polymer Coated Wall Mounted Wash Basin Size 565X435x215 Mm. ( Premium Range ) 25.63.3 White Vetrious China Anti Germ Fluoro-Polymer Coated Wall Mounted Wash Basin Size 575X470x190 Mm. ( Premium Range ) 25.63.4 White Vetrious China Anti Germ Fluoro-Polymer Coated Wall Mounted Wash Basin Size 600X470x160 Mm. ( Premium Range ) 25.63.5 White Vetrious China Anti Germ Fluoro-Polymer Coated Wall Mounted Wash Basin Size 635X430x190 Mm. ( Premium Range ) 25.64 Wall Hung Basin ; Providing And Fixing White Vitreous China Type Anti Germ Fluoro-Polymer Coated Wall Mounted Wash Basin With C.I. Brackets, 15 Mm C. P. Brass Pillar Cock, 15Mm Quarter Turn Angular Stop Cock, 32 Mm C.P. Brass Waste Coupling Length 130Mm And 32 Mm C.P. Brass Bottle Trap Size 200X300mm I / C Cutting And Making Good The Wall And Floors Wherever Required, All Fittings And Fixtures Etc. Complete . ( Premium Range ) 25.64.1 White Vetrious China Anti Germ Fluoro-Polymer Coated Wall Mounted Wash Basin Size 635X430x190 Mm. ( Premium Range ) 25.65 Providing And Fixing In Position Best Indian, Quarter Turn Table Mounted Sink Mixer ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) . ( Premium Range ) 25.66 Providing And Fixing In Position Best Indian, Quarter Turn Wall Mounted Sink Cock ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron ) . ( Premium Range ) 25.67 Shower Glass Cubical: Providing And Fixing Toughen Glass Shower Enclosure Conformed Is 2553 ( Part 1. 1990 ) Or Is 14900. 2000 Or Is 2835.1987 Or Is 14450. 2000 With C. P. Brass 5 Year Warranted Hardware, 19Mm Dia Ss 304 Grade Stabilizer, All Plastic Parts Of Food Grade Plastic And All Glass Shall Be Toughened At 700 Degree Celsius And Anti Lime Scale Treated Including Painting Of Fittings, Cutting And Making Good The Wall And Floors Wherever Required, All Fittings And Fixtures Etc. Complete. ( Premium Range ) 25.67.1 Providing And Fixing 8 Mm Toughen Glass Wall To Wall Sliding Shower Enclosure Size 1000Mm X 2000Mmx2000mm. ( Premium Range ) 25.67.2 Providing And Fixing 8 Mm Toughen Glass Made To Measurement Door Openable ( Inside / Outside ) Shower Enclosure Two Parts Size 800Mm X 2000Mm X1950mm. ( Premium Range ) 25.67.3 Providing And Fixing Corner Entry 6 Mm Toughen Glass Made To Measurement Shower Enclosure Size 1200Mm X1200mm X 1950Mm With Aluminum Profile On Sides, Shower Enclosure With Door Sliding On Both Sides. ( Premium Range ) 25.68 Shower Panel : Providing And Fixing Shower Panel With Anti Finger Point Stainless Steel Body Finish, Inbuilt Absolute Butadiene Styrene ( Abs ) Top Shower With 60 Nozzles And Waterfall, Embedded Self, Brass Spout, Multifunction Water Diverter For Top Shower, Waterfall, Hand Shower, Body Jets, Brass Faucet Body With Thermostatic Mixer. ( Premium Range ) 25.69 Shower Panel : Providing And Fixing Shower Panel Of Stainless Steel Structure, 200Mm Square Overhead Shower , 3 Adjustable Vertical Jets ( Round ) , Mixer And Diverter, Hand Shower With 1 Metre Long Flexible Tube. ( Premium Range ) 25.70 Thermostat Mixer : Providing And Fixing In Position Best Indian, Concealed High Flow Bath And Shower Mixer With Thermostatic Control Cartridge ( Standard Temperature Range 15 Degree C To 60 Degree C, Cartridge Made Of High Performance Thermostatic Polymer Material With Anti Scaled Function ) . ( Premium Range ) 25.71 Providing And Fixing In Position Best Indian, Exposed Wall Mounted Bath And Shower Mixer With Thermostatic Control Cartridge With Button Attachment On Spout With Connecting Legs And Wall Flange ( Standard Temperature Range 15 Degree C To 60 Degree C, Cartridge Made Of High Performance Thermostatic Polymer Material With Anti Scaled Function ) . ( Premium Range ) 25.72 Providing And Fixing In Position Best Indian, Eko Exposed Shower Mixer ( Wall Mounted ) With Thermostatic Control Cartridge, 115Mm Long Bend Pipe On Lower Side, Connecting Legs And Wall Flange ( Standard Temperature Range 15 Degree C To 60 Degree C, Cartridge Made Of High Performance Thermostatic Polymer Material With Anti Scaled Function ) . ( Premium Range ) 25.73 Providing And Fixing In Position Best Indian, Exposed Shower Mixer ( Tub Mounted ) With Thermostatic Control Cartridge, With Button Attachment On Spout With Straight Legs ( Standard Temperature Range 15 Degree C To 60 Degree C, Cartridge Made Of High Performance Thermostatic Polymer Material With Anti Scaled Function ) . ( Premium Range ) 25.74 Providing And Fixing In Position Best Indian, 4 - Way Diverter Consisting Of Concealed Body And Wall Flange For Multiple Shower Working With One Shut-Off Position And 3 Outlets For Body Shower, Head Shower And Spout ( Standard Temperature Range 15 Degree C To 60 Degree C, Cartridge Made Of High Performance Thermostatic Polymer Material With Anti Scaled Function ) . ( Premium Range ) 25.75 Providing And Fixing In Position Best Indian, Thermostatic Concealed High Flow Control Valve With Wall Flange ( Standard Temperature Range 15 Degree C To 60 Degree C, Cartridge Made Of High Performance Thermostatic Polymer Material With Anti Scaled Function ) . ( Premium Range ) 25.76 Medical Faucets : Providing And Fixing In Position Best Indian, Single Lever Surgical Purpose Elbow Action Basin Mounted Mixer With Extended Operating Lever Without Popup Waste System With 450Mm Long Braided Hoses ( Cartage Size32mm, Ceramic Disc Size 19Mm And Min. Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) . ( Premium Range ) 25.77 Providing And Fixing In Position Best Indian, Surgical Purpose Elbow Action Pillar Cock With Extended Operating Lever. ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) ( Premium Range ) 25.78 Providing And Fixing In Position Best Indian, Surgical Purpose Elbow Action Wall Mounted Pillar Cock With Extended Operating Lever And Wall Flange. ( Bonut Size 24Mm, Ceramic Disc Size 19Mm And Min. Nickel Plating 0.10 Micron And Chrome Plating 0.3 Micron, Quarter Turn ) . ( Premium Range ) 25.79 Providing And Fixing In Position Best Indian, 692Mm Long, Satin Finish C. P. Brass Grab Bar Made Of 304 Grade Ss I / C All Nuts And Screw ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) . ( Premium Range ) 25.80 Providing And Fixing In Position Best Indian, Satin Finish, C. P. Brass Grab Bar With Left / Right 90 Degree Angle, Made Of 304 Grade Ss I / C All Nuts And Screws. ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) . ( Premium Range ) 25.81 Providing And Fixing In Position Best Indian, C. P. Brass Grab Bar Vertical Swing, 304 Grade Ss Made All Nuts And Screws. ( 0.3 Micron Chrome And 10 Micron Nickel Plated ) . ( Premium Range ) 25.82 Providing And Fixing 8Mm Thick Frosted Safety Glass Urinal Partition Size 900Mm Height And 450Mm Width, Fixed With C P Brass Bracket Of Appropriate Size I / C Cutting And Making Good The Wall And Floors Wherever Required With All Fittings And Fixtures Etc. Complete. ( Premium Range ) 27.4 Providing And Fixing Stainless Steel Plate 304 Grade Of 1.50Mm Thick, Including Writing With Embossing Of Letters Of Required Size Including Fixing At Required Placed With Studs, Screws And Rawl Plugs Etc. Compete As Per Direction Of Engineer- In-Charge. 27.5 Providing And Fixing Of Name Plate For Offices Name Of Stainless Steel Plate 304 Grade Of 1.50Mm Thick, Including Writing With Computerized Vinayle Sheet Letters Of Required Size Including Fixing At Required Placed With Studs, Screws And Rawl Plugs Etc. Compete As Per Direction Of Engineer- In-Charge. 27.6 Providing And Fixing Aluminum Composite Panels Silver Colour With Matte Finish, 3Mm Thick, ( 0.25Mm 2.5Mm And 0.25Mm ) Sheet For Name Plate Including Writing With Computerized Vinayle Sheet Letters Of Required Size Including Fixing At Required Placed With 1.25M Chromium Plated Steel Pipe 15Mm Dia, Compete As Per Direction Of Engineer-In-Charge. 27.7 Providing And Fixing Aluminum Composite Panels Silver Colour With Matte Finish, 3Mm Thick, ( 0.25Mm 2.5Mm And 0.25Mm ) Sheet For Name Plate Including Writing With Computerized Vinayle Sheet Letters Of Required Size Including Fixing At Required Placed With Studs, Screws And Rawl Plugs Etc. Compete As Per Direction Of Engineer-In-Charge. 27.8 Providing And Fixing Stainless Steel English ( Capital ) And Hindi Letters In Standard Pattern Bellow Type Made With 1.20 Mm Thick Stainless Steel ( Asi Grade- 304 ) Depth Of Letter Shall Not Be Less Than 30Mm And Rate Includes Welding / Soldering Of Joints Polishing, Buffing And Fixing On The Wall, Plate And Beam Surface At Any Height With Necessary Nut And Bolts / Fastener Wherever Is Required Complete As Per Direction Of Engineer-In-Charge. 27.10 Providing And Fixing Of Prestressed Vertically Casted Concrete Panels ( Both Surfaces Should Be Smooth And Having Grooves On Both Faces ) Of M-40 Grade Of Concrete Of Size 2100X300x50 Mm Having Minimum 4 Nos Of High Tensile Steel Wire As Per Is 6006:2014 Of Dia 3 Mm Placed Horizontally In Full Length Of Panel With Prestressed Precast Concrete Column Of M-40 Grade Of Size 3000X150x150 Mm Having Minimum 7 Nos Of High Tensile Steel Wire As Per Is 6006:2014 Of Dia 3 Mm Placed Vertically In Full Length To Erect Precast Boundary Wall Panels To Height 2100 Mm From Gl Including Excavation Of Pit Of Size 750X750x900 Mm In All Kind Of Soil Except Rock For Erection Of Columns And Grouting The Pit With M-20 Grade Of Concrete. Manufacturing, Transportation And Installation At Site All Complete As Per The Direction Of Engineer-In-Charge. 27.11 Extra For Every Additional Height Of 0.3 M Up To Height Of Wall 3 M 28.35 Providing And Fixing Of 3 Seater Stone Bench Made Of 75Mm Thick Stone Slab Finished By Different Numbers Of Ambry Stone And Two Coats Of 124 No Sealer Coat To Prevent From Weather Including Fixing On A Pedestal ( Cost Of Pedestal To Be Paid Separately ) Etc. Complete As Per Direction Of Engineer In Charge. Size: Length 1500Mm, Width 600Mm, Legs Height 500 Mm, Back Support Height 500Mm. 28.36 Providing And Fixing Of Stone Planter ( Bench ) Made Of 75Mm Thick Stone Slab Finished By Different Numbers Of Ambry Stone And Two Coats Of 124 No Sealer Coat To Prevent From Weather Including Fixing On A Pedestal ( Cost Of Pedestal To Be Paid Separately ) Etc. Complete As Per Direction Of Engineer In Charge. Size: Length 1200Mm, Width 500Mm, Legs Height 500 Mm. 28.37 Providing And Fixing Of Stone Table Made Of 75Mm Thick Stone Slab Finished By Different Numbers Of Ambry Stone And Two Coats Of 124 No Sealer Coat To Prevent From Weather Including Fixing On A Pedestal ( Cost Of Pedestal To Be Paid Separately ) Etc. Complete As Per Direction Of Engineer In Charge. Size: Length 1000Mm, Width 600Mm, Legs Height 750 Mm. 28.38 Providing And Laying C.C. Pavement Of Mix M- 25 With Ready Mixed Concrete From Batching Plant Including Centering And Shuttering Complete. The Ready Mixed Concrete Shall Be Laid And Finished With Screed Board Vibrator, Vacuum Dewatering Process And Finally Finished By Floating, With Wire Brush Etc. Complete As Per Specifications And Directions Of Engineer- In-Charge.Note: Cement Content Considered In This Item Is @ 330 Kg / Cum. 29.1 Preparation Of Site Plan And Location Plan With Total Station Surveying Showing All Individual Structures And Features Like Trees, Roads, Culverts, Nallas, Electric Poles, Telephone Poles, Sewer Lines, Chambers, Water Supply Lines, Hand Pumps, Well Etc. Complete Along With Showing Location Of Roads Proposed In Master Plan. I / C Contours Of Entire Area At 0.5 M. Intervals Using Auto Level, Preparing Of Site Plan In Soft Copy ( Using Autocad ) In Suitable Scale As Desired By Engineer-In-Charge Duly Indicating North Direction. Rate Includes Providing 1 Digital Copy And Six Hard Copies, One Print On Tracing Film, Khasra Map Duly Showing The Land And Location Plan ( Index Plan ) And Google Image Of The Land. Rates Are Inclusive Of Transportation Charges. ( Work Shall Be Got Done Through Consultants Duly Empanelled With Chief Architect Mp P.W.D. ) 29. 1.1 Upto 1 Hectare 29.1.2 1 Hectare To 2 Hectare 29.1.3 Add Extra For Each Additional One Hectare Or Part There Off 29.1.4 Excavation Of Trial Pit Of Size 1.20 M X 1.20 M With Minimum Depth Of 0.9 M And Maximum Depth Of 3.5M As Directed By The Engineer In Charge. Trial Pit Shall Be Taken At Suitable Location / Locations As Directed By Engineer In Charge And Shall Be Indicated On The Site Plan Showing Details Of Soil Strata. 29.2 Preparation Of Double Line Plan After Measurement Of Internal As Well As External Dimensions Of Existing Buildings / Structures And Plotting The Same In Suitable Scale As Directed By Engineer-In-Charge. 29.3 Preparing Of Double Line Plan For Planning Of Addition And Alteration Work After Measurement Of Internal As Well As External Dimensions And Details Of Existing Door Window, Ventilator Openings And Partitions, Addition / Alteration Done Previously In Buildings / Structures And Plotting The Same Separately Showing Sectional Elevations ( Minimum Two Numbers ) And All Elevations Along With All Relevant Details Like Doors, Windows Stairs Etc In Suitable Scale As Directed By Engineer-In-Charge. The Consultant Shall Also Submit Detailed Condition Survey Report. 29.4 Performing Plate Load Test ( P.L.T. ) For Determining Soil Bearing Capacity ( Sbc ) At Site Including Submission Of Geotechnical Report And Recommending Bearing Capacity In Accordance With Is-1888-1982 ( Without Conveyance ) . 29.5 Performing Standard Penetration Test For Determining Soil Bearing Capacity ( Sbc ) In Accordance With Is-2131-1981 And Submission Of Geotechnical Report On Bearing Capacity Based On Spt In Accordance With Is-6403-1981 ( Without Conveyance ) 29.6 Transportation Charges For Transportation Of Geotechnical Testing Equipments For Plate Load Test Or Standard Penetration Test Upto A Distance Of 100Km. ( Upto 100Km Going And 100Km Returning From District H.Q. Both Way ) Rates Are Inclusive Of Loading And Unloading Of Testing Equipments And Other Incidental Charges During Both Journeys To Be Paid Only Once For One Set ( Separate For Plt Or Spt ) Of Testing. 29.6.1 Up To 100Km ( Both Way ) 29.6.2 Add Extra For Distance Beyond 100Km And Upto 150Km. ( Both Way ) 29.6.3 Add Extra For Every Additional Km Beyond 150Km ( Both Way ) 29.7 Preparation Of Detailed Estimate On The Basis Of The Working Drawing Supplied By The Department And Current Sor Applicable, Including Computation Of Bill Of Quantities ( Boq ) Of Material And Supplying The Same In Six Hard Copies And One Soft Copy To The Engineer-In-Charge And If Required Revision Of The Same Without Any Additional Charges. ( Work Shall Be Got Done Through Consultants Duly Empanelled With Chief Architect Mp P.W.D. ) The Estimate Shall Be Prepared Only In Standard Format Prescribed As Per Appendix 14 Of This Sor. 29.8 Preparation Of Dpr Including Site Visit To Verify Contours & Soil Reports And Preparation Of Master Plan Of Campus Including Architectural Working Drawings And Estimates In Prescribed Format As Per Appendix 14 Of This Sor To Obtain Aa; And There After Architectural Drawings For Statutory Approvals And Detail Drawings At Construction Stage; And As Constructed Drawings On Completion Of Work The Dpr. Bifurcation Of Professional Fee Payable In Stages As Per This Item Shall Be In Accordance With List-1, List-2 & List-3. Given In Preambles Of This Chapter 3.All Work Such As Preparation Of Dpr, Working Drawings, Statuary Drawings, Details Drawings And As Constructed Drawings Shall Be Done By The Same Architect / Consultant To Ensure Consistency In Services, Even If Time Required To Complete All Stages As Per Activity Sheet Exceeds The Contract Period. 29.9 Preparation Of The Structure Design & Drawings By A Structural Engineer Empanelled With The Chief Architect Mp Pwd On The Basis Of Architectural Drawings Supplied / Approved By The Department, In Accordance With Relevant Codes / Manuals And According To The Terms & Conditions, Prescribed In Activity Sheet No-1, List-4 Given In Annexure-14 Appended With Sor. Design And Drawing Shall Also Include ‘Tables’ For The Bar-Bending Schedules ( Bbs ) And Concrete / Steel Consumption. The Design And Drawing Shall Be Submitted To The Engineer-In-Charge In Six Hard Copies And One Soft Copy For Execution. The Payment Shall Be Done In Accordance With Relevant Stage In Activity Sheet And List. 29.9.1 First Time Design Work 29.9.1.1 Built Up Area Upto 500 Sqm 29.9.1.2 Built Up Area More Than 500 Sqm And Upto 3000 Sqm 29.9.1.3 Built Up Area More Than 3000 Sqm. 29.9.2 Repetition Of Structural Design Of A Structural Design Done By The Structural Himself Or By Any Other Structural Engineer At Different Site, Where S.B.C. Or Seismic Zone Is Different. ( Only Plinth Area Payment To Be Paid ) 29.9.2.1 Plinth Area Upto 500 Sqm 29.9.2.2 Plinth Area More Than 500 Sqm And Upto 3000 Sqm 29.9.2.3 Plinth Area More Than 3000 Sqm 29.10 Assessment Of Load Carrying Capacity And Structural Soundness Of Existing Building Mainly Comprising Of R.C.C. Structure Using Existing Information Such A Existing Drawing, Design And Footing Details, If Available. The Consultant Shall Carry Out Destructive / Non Destructive Testing Of Structure At Site Including Site Investigation Which May Require Opening Of Footings By Digging Adjoining Ground Fill And Restore Backfill Structure After Testing Is Done. This Work Shall Be Performed By A Structural Engineer ( Proof Checking ) Empanelled With The Chief Architect Mp Pwd Bhopal Or Any Government Engineering College. The Rate Shall Include All Charges For Labour, Testing, Consultation Of Geotechnical Consultant And Site Visit To Carry Out Site Testing Per Sqm ( Built Up Area Of Wing / Block Of Existing Building Where Construction Is Proposed ) . 29.11 Drafting Structural Drawing On The Basis Of The Structural Design Supplied By The Department In Accordance With All Relevant Codes / Manuals And As Per Is: 1893- 2002 And Is: 13920-1993 With Updation. The Work Shall Include Making Revision / Compliance If Any And Obtaining Approval Of Drafting Work, Without Any Additional Cost Within Time Specified By The Engineer-In-Charge Or From The Competent Authority. The Drawings For Approval Shall Be Submitted To The Engineer- In- Charge In Two Hard Copies ( Minimum Size A-2 ) And There After Fair Drawings On 100 Micron Film Along With Seven Copies Of Amonia Prints ( Minimum Size A-1 ) And One Soft Copy. Drawings Shall Be Stamped And Signed With The Statement That Drafted By Me As Per Structural Design Done Or Got Done By The Department. Note:- This Work Can Be Done Only Through A Person Having Qualification Of Diploma In Civil Engineering / Be ( Civil Engineering ) And Having Certificate In Autocad Issued By Autodesk Or By Its Authorized Institution.
Contract Date: Sep 27, 2023 Contract Value : ₹ 47.00 Lakh
Government Departments No of Bidders 2
Madhya Pradesh View Result →
45.
Health and Family Welfare #2309768 AOC
Supply Of Drug And Medicine Under Mndy , 01. Anaesthetics , Bupivacaine Hydochloride In Dextrose Injection Usp Each Ml Contains Bupivacaine Hydrochloride 5.0 Mg Dextrose 80.0 Mg , Bupivacaine Inj Ip 0.5% , Halothane Bp , Isoflurane Usp , Ketamine Inj Ip 50 Mg / Ml , Lignocaine Ointment 5 O / O , Lignocaine And Adrenaline Inj Ip Each Ml. Contains Lignocaine Hydrochloride Ip 20 Mg Adrenaline Ip 0.01 Mg , Lignocaine And Dextrose Injection Ip Each Ml Contains Lignocaine 50 Mg And Dextrose ( Monohydrate ) 75 Mg , Lignocaine Gel Ip 2% , Lignocaine Inj Ip 2% , Propofol Inj Ip / Bp / Usp 10 Mg / Ml , Thiopentone Inj Ip 0.5 G , Sevoflurane , Atropine Sulphate Injection 0.6Mg / Ml , Liquid Medical Oxygen ( Lmo ) , 02. Analgesic Antipyretices And Anti Inflammatory Drugs , Diclofenac Sodium Inj Ip 25 Mg / Ml ( Im / Iv Use ) , Diclofenac Gastro Resistant Tablet Ip 50 Mg ( Enteric Coated ) , Fentanyl Citrate Injection Ip 2 Ml , Ibuprofen And Paracetamol Tablets Ibuprofen 400 Mg+Paracetamol 325 Mg , Ibuprofen Tab Ip 200 Mg ( Coated ) , Ibuprofen Tab Ip 400 Mg ( Coated ) , Morphine Sulphate Inj Ip 10Mg / Ml , Paracetamol Drops Paediatric Paracetamol Oral Suspension Ip ( Each Ml Contains Paracetamol 150Mg ) , Paracetamol Syrup Ip 125 Mg / 5Ml , Paracetamol Tab Ip 500 Mg , Paracetamol Inj. 150 Mg / Ml , Pentazocine Inj Ip 30Mg / Ml ( Im / Iv Use ) , Tramadol Cap Ip 50 Mg , Tramadol Inj 50 Mg / Ml , Indomethacin Cap Ip 25 Mg , Diclofence Prolonged Release Tablet Ip 100 Mg , Ibuprofen Oral Suspension Bp / Usp 100 Mg / 5 Ml , Diclofenac Sod + Paracetamol Tablets Diclofenac Sod 50 Mg + Paracetamol 325 , Aceclofenac And Paracetamol Tablets Aceclofenac 100 Mg And Paracetamol 325 , Diclofenac Gel: Diclofenac Diethylamine 1.16%, Methyl Salicylate 10%, Linseed Oil 3%, Menthol 5% , Etoricoxib Tab Ip 120Mg , Mefenamic Acid Tablets Bp 500 Mg , Fentanyl Citrate Injection 50Mcg / Ml , Naproxen Tablet Ip 500Mg , Naproxen Tablet Ip 250Mg , Etoricoxib Tablet 90 Mg , Aspirin Tablet Ip ( Gastro-Resistant ) 150 Mg , Butorphanol Tartrate Injection Usp 1Mg / Ml 1Ml Size , Diclofenac Sodium Aqueous Injection 75 Mg / Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip1% W / V 100Ml Size , Ketorolac Tablet 10 Mg , Baclofen Tablet Ip 10 Mg ( Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tizanidine Hydrochloride Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg ) , 03. Antiallergics And Drugs Used In Anaphylaxis , Adrenaline Injection Ip 1Mg / Ml Im / Iv Use , Betamethasone Tab Ip 0.5Mg , Chlorpheniramine Maleate Tab Ip 4Mg , Dexamethasone Inj Ip 8Mg / 2Ml , Dexamethasone Tab Ip 0.5 Mg , Hydrocortisone Sodium Succinate Injection Ip 100 Mg Base / Vial ( Im / Iv Use ) , Hydroxyzine Tab Ip 25 Mg , Methyl Prednisolone Sodium Succinate For Injection Usp 500 Mg , Pheniramine Inj Ip 22.75Mg / Ml , Prednisolone Tab Ip 5 Mg , Promethazine Syrup Ip 5 Mg / 5Ml , Promethazine Inj Ip 25Mg / Ml , Promethazine Tab Ip 25 Mg , Betamethasone Sod Phos Inj Ip 4Mg / Ml , Prednisolone Tablet Ip 10 Mg , Prednisolone Tab 20 Mg , Anticold Syrup Each 5 Ml Contains Phenylephrine Hydrochloride 2.5Mg , Chlorpheniramine Maleate 1 Mg, And Paracetamol 125 Mg , Cetirizine, Phenylephrine & Paracetamol Tablets Cetirizine 5 Mg, Phenylephrine 10 Mg & Paracetamol 325 Mg Tab , Cetirizine Syrup Ip 5Mg / 5 Ml , Levoceitrizine Tablet 5Mg , Montelucast ( 10Mg ) + Levocetrizine Tablet ( 5Mg ) , Dexamethasone Tablet Ip 4 Mg ( Each Uncoated Tablet Contains Dexametasone Ip 4 Mg ) , 04. Antidotes And Other Substances Used In Poisoning , Naloxone Inj Ip 0.4Mg / Ml , Pralidoxime Chloride Injection Ip 25 Mg / Ml / 500 Mg , Acetylcystine Solution Usp ( Injection ) 200 Mg / Ml , 05. Anti Epileptic Drugs , Carbamazepine Tab Ip 200 Mg ( Film Coated ) , Carbamazepine Tab Ip 100 Mg ( Film Coated ) , Phenobarbitone Tab Ip 30 Mg , Phenytoin Injection 50Mg / Ml , Phenytoin Oral Suspension Ip 25Mg / Ml , Phenytoin Tab Ip 100 Mg ( Film Coated ) , Sodium Valproate Inj 100 Mg / Ml , Sodium Valproate Gastro Resistant Tablets Ip 200 Mg , Phenobarbitone Inj Ip 200Mg / Ml , Carbamazepine Oral Suspension Usp 100 Mg / 5Ml , Sodium Valproate Oral Solution Ip 200 Mg / 5 Ml , Sodium Valproate Tablet ( Gastro Resistant ) Ip 500Mg , Clobazam Tablet / Capsule 5 Mg , Clobazam Tablet / Capsule 10 Mg , Levetiracetam Tablet 500 Mg , Levetiracetam Oral Suspension 100Mg / Ml , Levetiracetam Injection 500Mg / 5Ml , Gabapentine Tablet / Capsule 100Mg , Gabapentine Tablet / Capsule 300Mg , Lamotrigine Tablet Ip 50 Mg ( Each Sustained Release Tablet Contains Lamotrigine Ip 50 Mg ) , Divalproex Extended Release Tablet Ip 250 Mg ( Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg ) , Oxcarbazepine Tablet Ip 150 Mg ( Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg ) , Lacosamide Tablet 100 Mg ( Each Film Coated Tablet Contains Lacosamide 100 Mg ) , Topiramate Tablet Ip 25 Mg ( Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , 06. Anti Infective Drugs , Acyclovir Oral Suspension Ip 400Mg / 5Ml , Acyclovir Tab Ip 200 Mg , Acyclovir Tab Ip 800 Mg , Albendazole Oral Suspension Ip 400 Mg / 10Ml , Albendazole Tablets Ip 400 Mg , Amikacin Inj Ip 100 Mg , Amikacin Inj Ip 500 Mg , Amoxycillin And Cloxacillin Cap 250 + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs Ip 500 Mg + 125 Mg , Amoxycillin Cap Ip 250Mg , Amoxycillin Cap Ip 500Mg , Amoxycillin Dispersible Tablets Ip 125 Mg , Amphotericin B Inj Ip 50 Mg , Ampicillin Injection Ip 500 Mg , Azithromycin Tab 100 Mg Dispersible Tabs ( 3 Tab Strip 10X3x3 ) , Azithromycin Tablets Ip 250Mg , Azithromycin Tab Ip 500 Mg , Benzathine Benzylpenicillin Inj Ip 12 Lac Units , Benzathine Benzylpenicillin Inj Ip 6 Lac Units , Cefixime Tab Ip 100 Mg , Cefixime Tab Ip 200 Mg , Cefoperazone And Sulbactum For Inj ( Cefoperazone Sodium Eq.To Cefoperazone 1Gm And Sulbactum Sodium Eq. To Sulbactum 0.5Gm ) ( Im / Iv Use ) , Cefotaxime Injection 1 G , Cefotaxime Inj Ip 250 Mg , Ceftazidime Inj Ip 1G , Ceftazidime Inj Ip 250 Mg , Ceftazidime Inj Ip 500 Mg , Ceftriaxone Inj Ip 1G / Vial , Ceftriaxone Inj Ip 250 Mg / Vial , Ceftriaxone Inj Ip 500Mg / Vial , Cephalexin Cap Ip 250 Mg , Cephalexin Cap Ip 500 Mg , Chloroquine Phosphate Inj Ip 40 Mg / Ml , Chloroquine Phosphate Tab. Ip 250Mg Eq To 155 Mg Of Chloroquine Base Film , Chloroquine Phosphate Suspension Ip 50 Mg / 5Ml , Ciprofloxacin Injection Ip 200Mg / 100Ml , Ciprofloxacin Tablets Ip 250 Mg Film Coated , Ciprofloxacin Tablet Ip 500 Mg Film Coated , Clotrimazole Cream Ip 2% W / W , Clotrimazole Vaginal Tab Ip 500Mg , Co-Trimoxazole Oral Suspension Ip Each 5 Ml Contains Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Co-Trimoxazole Tablets Ip Trimethoprim 40 Mg And Sulphamethoxazole 200 Mg , Diethylcarbamazine Tab Ip 100 Mg , Doxycycline Cap Ip 100 Mg , Fluconazole Tablets Ip 150Mg , Gentamycin Injection Ip 80Mg / 2Ml ( Im / Iv Use ) , Griseofulvin Tab Ip 125 Mg , Itraconazole Cap 100 Mg , Meropenem Inj Ip 500 Mg , Metronidazole Inj Ip 500 Mg / 100Ml , Metronidazole Benzoate Oral Suspension Ip 100 Mg Of Base / 5Ml , Metronidazole Tablets Ip 200 Mg ( Film Coated ) , Metronidazole Tablets Ip 400 Mg ( Film Coated ) , Norfloxacin Tab Ip 400Mg Film Coated , Ofloxacin Tab Ip 200 Mg , Primaquine Tab Ip 2.5 Mg , Primaquine Tab Ip 7.5 Mg , Quinine Dihydrochloride Inj Ip 300 Mg / Ml , Quinine Sulphate Tablets Ip 300 Mg ( Film Coated ) , Ampicillin Cap Ip 500Mg , Nitrofurantoin Tab Ip 100Mg , Cloxacillin Sodium Inj Ip 500Mg , Cephalexin Oral Suspension Ip ( Cephalexin Dry Syrup Ip ) 125Mg / 5 Ml , Ofloxacin Oral Suspension Ip 50Mg / 5Ml , Tinidazole Tab Ip 300 Mg ( Film Coated ) , Tinidazole Tab Ip 500 Mg ( Film Coated ) , Piperacillin + Tazobactum For Injection Usp 4Gm+500Mg , Amoxycillin Oral Suspension Ip ( Dry Syrup ) 125 Mg / 5Ml , Cefpodoxime Dispersible Tab 50 Mg , Cephalexin Tablets 125 Mg ( Dispersible Tablets ) , Meropenem Inj. Ip 1Gm , Acyclovir Intravenous Infusion Ip 250Mg , Acyclovir Intravenous Infusion Ip 500Mg , Amikacin Inj Ip 250 Mg , Amoxicillin And Potassium Clavulanic Ip Inj 600Mg , Amoxicillin And Potassium Clavulanate Inj Ip 1.2Gm , Amoxycillin And Potassium Clavunate Oral Suspension Ip 200 Mg +28.5 Mg / 5 Ml ( 30Ml Bottle ) , Artesunate Injection 60 Mg ( I.M. I.V.Use ) Each Combo Pack Contains Artesunate Injection 60 Mgvial, Sodium Bicarbonate Injection Ip 5 O / O W / V ( 1Ml Ampoule ) , Sodium Chloride Injection Ip 0.9O / O W / V ( 5Ml Ampoule ) , Aztreonam Injection Usp 500 Mg , Cefepime Injection Ip 500 Mg , Cefixime Oral Suspension Ip 25Mg / Ml ( Paediatric Drops ) , Cefuroxime Axetil Tab Ip 250 Mg , Clindamycin Capsule Ip 150Mg , Clindamycin Capsule Ip 300 Mg , Levofloxacin Tablets Ip 250 Mg , Linezolid Tablets Ip 600 Mg , Linezolid Inj 200Mg / 100Ml , Mefloquine Tablets Ip 250 Mg , Ofloxacin And Ornidazole Tablets Ofloxacin 200 Mg And Ornidazole 500 Mg , Ofloxacin Infusion Ip 200Mg / 100 Ml ( In Nacl Inj ) , Vancomycin For Intravenous Infusion Ip 500 Mg , Vancomycin For Intravenous Infusion Ip 1 Gm , Artemether And Leumefantrine Tablet ( 80 Mg And 480 Mg ) , Co-Trimoxazole Tablet ( Trimethoprim 160Mg+Sulphamethoxazole 800Mg ) , Aztreonam Injection 1Gm , Framycetin Sulphate Cream 1 O / O 30Gm Pack , Framycetin Sulphate Cream 1 O / O 100 Gm Pack , Artemether And Leumefantrine Tablet ( 40 Mg And 240 Mg ) , Amoxycillin Tablet 250 Mg + Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Piperacillin Injection 2 Gm + Tazobactom 250 Mg Ip , Ceftriaxone Injection 1 Gm + Tazobactum 1.25 Mg , Cefadraxil Tablet 250 Mg , Cefadraxil Tablet 500 Mg , Ofloxacin Oral Suspension Ip ( Each 5Ml Contains Ofloxacin Ip 100 Mg ) 30 Ml Size , Levofloxacin Tablets Ip 500 Mg ( Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg ) , Faropenem Tablet Sodium 200 Mg ( Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg ) , Clindamycin Phosphate Injection Ip 300 Mg , Imipenem + Cilaatatin Injection 500Mg / 500Mg Ip Powder For Solution , Polymixin Sulphate B Injection Usp 5 Lac I.U. , Meropenem Injection Ip 250 Mg , Colistimethate Injection Ip 1M Iu Powder For Solution , Voriconazole Injection 200 Mg / Vial , Terbinafine Hydrochloride Tablet 250 Mg , Valganciclovir Tablet 450 Mg , Entecavir Tablet Ip 0.5 Mg ( Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg ) , Ganciclovir Sodium Injection 500 Mg ( Lyophilized Powder For Reconstitution ) , 07. Anti Neoplastic And Immuno Suppressant Drugs Palliative Care , Azathioprine Tab Ip 50 Mg , Bleomycin Injection Ip 15Mg ( Bleomycin Sulphate Injection 15 Units ) , Chlorambucil Tab Ip 5 Mg , Cisplatin Inj Ip 50 Mg / 50 Ml , Cyclophosphamide Inj Ip 200 Mg , Cyclophosphamide Inj Ip 500 Mg , Cytarabine Injection Bp 500Mg , Danazol Cap Ip 50 Mg , Daunorubicin Inj Ip 20 Mg , Doxorubicin Inj Ip 50 Mg / 25 Ml , Etoposide Inj Ip 100 Mg , Fluorouracil Inj Ip 250 Mg / 5Ml , L-Asparaginase Inj 10000 Iu , Leucovorin Calcium Inj Ip / Calcium Folinate Inj Ip 10 Mg / Ml , Melphalan Tab Ip 5 Mg , Mercaptopurine Tab Ip 50 Mg , Methotrexate Inj Ip 50 Mg / 2 Ml , Methotrexate Tab Ip 2.5 Mg , Paclitaxel Inj Ip 260 Mg , Paclitaxel Inj Ip 100 Mg , Tamoxifen Tab Ip 10 Mg , Vinblastine Inj Ip 10Mg / 10Ml , Vincristine Inj Ip 1Mg ( Vial ) / Vincristin Injection Usp 1Mg / Ml ( Amp ) , Alpha Interferon Injection Interferon Alpha 2 Concentrated Solution Ip 3 Million Unit , Carboplatin Injection 150 Mg , Carboplatin Injection 450 Mg , Cisplatin Inj Ip 10 Mg / 10 Ml , Dacarbazine Injection 500 Mg Usp / Bp , Filgrastim Injection ( Granulocyte Colony Stimulating Factor ) ( Sc / Iv Use ) 300 Mcg , Gemcitabine For Injection 200 Mg , Gemcitabine For Injection 1Gm , Ifosfamide Injection Ip / Bp / Usp 1Gm , Imatinib Tab 400Mg , Methotrexate Tablets Ip 10 Mg , Mitomycine Injection Ip 10 Mg / Mitomycine For Injection Usp 10 Mg , Oxaliplatin Injection Usp 50 Mg , Cyclosporin Capsule Usp / Ip 50 Mg , Procarbazine Hydrochloride Capsule Usp 50 Mg ( Each Capsule Contains Procarbazine Hydrochloride Usp 50 Mg ) , Bendamustine Injection 100 Mg , Capecitabine Tablet Ip 500 Mg ( Each Film Coated Tablet Contains Capecitabine Ip 500 Mg ) , Letrozole Tablet Ip 2.5 Mg ( Each Film Coated Tablet Contains Letrozole Ip 2.5 Mg ) , Temozolomide Capsule Ip 100 Mg ( Each Hard Gelatin Capsule Contains Temozolomide Ip 100 Mg ) , Bortezomib Injection 2Mg , Abiraterone Acetate Tablet Ip 250 Mg ( Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg ) , Lomustine Capsule Ip 40 Mg ( Each Capsule Contains Lomustine Ip 40 Mg ) , Thalidomide Capsule Usp 100 Mg ( Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg ) , Bevacizumab Injection 400 Mg , Bevacizumab Injection 100 Mg , Cyclophosphamide Tablet Ip 50 Mg ( Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg ) , Gefitinib Tablet Ip 250 Mg ( Each Film Coated Tablet Contains Gefitinib Ip 250 Mg ) , Mycophenolate Mofetil Capsule Ip 250 Mg ( Each Capsule Conatin Mycophenolate Mofetil Ip 250 Mg ) , Tacrolimus Capsule Ip 0.5 Mg ( Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg ) , Mycophenolate Sodium Tablet 360 Mg ( Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg ) , Bicalutamide Tablet Ip 50 Mg ( Each Film Tablet Contains Bicalutamide Ip 50 Mg ) , 6 Thioguanine Tablet Usp 40 Mg ( Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg ) , Zoledronic Acid Injection Ip 4Mg / 100Ml 100 Ml Size , Dasatinib Tab 100 Mg , 08. Anti Parkinsonism Drugs , Levodopa And Carbidopa Tablets Ip Levodopa 100 Mg + Carbidopa 10 Mg , Levodopa And Carbidopa Tab 250 Mg+ 25 Mg , Trihexyphenidyl Hcl Tab Ip 2 Mg , Bromocriptine Tablets Ip 2.5 Mg , 09. Drugs Affecting The Blood , Acenocoumarol Tab Ip / Nicoumalone Tab Ip 2 Mg , Deferasirox Tab 100 Mg , Deferasirox Tab 500 Mg , Deferiprone Cap 250 Mg , Deferiprone Cap 500 Mg , Desferrioxamine Injection Ip 500 Mg / Vial ( For I.M. Inj And I.V S.C. Infusion ) , Dried Human Anti Haemophlic Fraction Ip ( Dried Factor Viii Fraction Ip ) 250 Iu / Vial ( Iv Use ) , Enoxaparin Sodium Inj Ip 60 Mg , Ethamsylate Inj 250 Mg / 2Ml ( Im / Iv ) , Heparin Sodium Inj Ip 5000 Iu / Ml ( Im / Iv Use ) , Human Albumin Solution Ip 20% , Rh-Erythropoetin Inj 10000 Iu , Rh-Erythropoetin Inj 2000Iu , Rh-Erythropoetin Inj 4000 Iu , Vitamin K Injection Each Ml Contains Menadione Sodium Bisulphite 10Mg Equivalent To 5.2 Mg Of Menadione. ( Aqueous Solution ) , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , Factor Ix Concentrate ( Purified ) 600 I.U. ( Human Coagulation Factor Ix ) , Anti Inhibitor Coagulation Complex ( Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial ) , Hydroxyethyl Starch ( 130 / 0.4 ) 6 O / O W / V With Sodium Chloride 0.9 O / O W / V Intravenous Infusion / Balanced Electrolyte Solution Of Sodium Chloride, Sodium Acetate, Potassium Chloride, Magnesium Chloride Intravenous Infusion , Tranexamic Acid Tablets Ip / Bp 500 Mg , Warfarin Sodium. Tab Ip 5Mg , Vitamin K-1 ( Phytomenadione ) 1Mg / 0.5Ml Injection ( Detail In Rc ) , Dried Factor Viii Fraction Ip ( Iv Use ) 500 Iu / Vial , Dried Factor Viii Fraction Ip ( Iv Use ) 1000 Iu / Vial , Recombinant Coagulation Factor Viia 1Mg , Recombinant Coagulation Factor Viia 2Mg , N Butyl Alcohol Injection 0.26Mg / 5Ml, Citric Acid 2.5Mg / 5Ml And Sod. Chloride Solution 5 Ml Size , Ethamsylate Tablet 500 Mg ( Each Uncoated Coated Tablet Contains Ethamsylate 500 Mg ) , Feracrylum 1% W / W Sterile Solution 100 Ml , Tranexamic Acid Injection Ip 100Mg / Ml 5Ml Size , Recombinant F Ix 500 Iu With Diluent , 3Rd Generation Recombinant F Viii 250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , 10. Cardio Vascular Drugs , Amiodarone Tab Ip 100 Mg , Amiodarone Tab Ip 200 Mg , Amiodarone Hydrochloride Inj 50 Mg / Ml , Amlodipine Tab Ip 2.5 Mg , Amlodipine Tablets Ip 5 Mg , Atenolol Tab Ip 50 Mg , Atorvastatin Tab Ip 10Mg , Clopidogrel Tab Ip 75 Mg , Digoxin Inj Ip 0.25 Mg / Ml , Digoxin Tab Ip 0.25 Mg. , Diltiazem Tabs Ip 30 Mg Film Coated , Dobutamine Inj Ip / Bp 50Mg / Ml / 250Mg ( Vial / ) Dobutamine Inj Usp250 Mg / 5Ml ( Amp ) , Dopamine Hydrochloride Inj 40 Mg / Ml , Enalapril Maleate Tab Ip 5Mg , Enalapril Maleate Tab Ip 2.5Mg , Isosorbide Dinitrate Tab Ip 5 Mg , Isosorbide Mononitrate Tabs Ip 20 Mg , Lisinopril Tab Ip 5 Mg , Losartan Tab Ip 50 Mg , Magnesium Sulphate Inj. 500Mg / Ml ( 50%W / V ) , Methyldopa Tab Ip 250Mg Film Coated , Nifedipine Cap Ip 5Mg , Nifedipine Tablets Ip 10 Mg ( Sustained Release ) , Nitroglycerin Inj 5 Mg / Ml , Propranolol Tab Ip 40 Mg , Streptokinase Injection 15 Lac Units , Verapamil Tab Ip 40 Mg Film Coated , Labetalol Tab Ip 100Mg , Labetalol Hcl Inj Ip 20Mg / 4Ml , Aspirin Delayed Release Tablet / Aspirin Gastroresistant Tab ( Each Enteric Coated Tablet Contains Acetyl Salicylic Acid 75 Mg ) , Amlodipine And Enalapril Maleate Tablets ( Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Enalapril Maleate 5 Mg ) , Losartan Potassium And Amlodipine Tablets Ip ( Losartan Potassium 50 Mg, Amlodipine Besilate Eq To Amlopdipine 5Mg ) , Losartan Potassium And Hydrochlorothiazide Tablets Ip ( Losartan Potassium 50 Mg, Hydochlorothiazide 12.5 Mg ) , Amlodipine And Lisinopril Tablets Amlodipine Besilate Equivalent To Amlodipine 5 Mg, Lisinopril Eq To Lisinopril ( Anhydrous ) 5 Mg , Amlodipine And Atenolol Tablet ( Amlodipine Besilate Equivalent To Amlodipine 5Mg, Atenolol 50Mg ) , Atenolol Tab Ip 25 Mg , Enalapril Maleate Tablets Ip 10 Mg , Lisinopril Tablets Ip 10 Mg , Lisinopril Tab Ip 2.5 Mg , Losartan Tab Ip 25 Mg , Adenosine Injection 6 Mg / 2Ml , Atorvastatin Tablets Ip 40 Mg , Clopidogrel And Aspirin Tables, Clopidogrel 75 Mg And Aspirin 75 Mg , Fenofibrate Capsules / Tab Ip 200 Mg , Isoprenaline Injection Ip 2Mg / Ml , Metoprolol Tablets Ip 25 Mg , Metoprolol Succinate Extended Release Tablets Ip / Usp 50 Mg , Noradrenaline Injection Ip 2 Mg / Ml , Prazosin Tablets ( Extended Release ) 2.5 Mg , Telmisartan Tablets Ip 40 Mg , Urokinase Injection 5 Lac Unit ( Lyophilized ) , Ramipril Tablets Ip 2.5 Mg , Glyceryl Trinitrate Tablets 2.6 Mg Controlled Release Tablets , Clonidine Hydrochloride Tablet Ip 0.1 Mg ( Each Tablet Contains Clonidine Hydrochloride Ip 0.1 Mg ) , Sotalol Hydrochloride Tablet Usp / Bp 40 Mg ( Each Film Coated Tablet Contains Sotalol Hydrochloride Usp / Bp 40 Mg ) , Esmolol Hydrochloride Injection 10Mg / Ml 10 Ml Size , Sodium Nitroprusside Injection 25 Mg / Ml 2Ml Size , Carvedilol Tablet 3.125 Mg , Rosuvastatin Tablet Ip 20 Mg ( Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg ) , Rosuvastatin Tablet10 Mg , Sacubitril 24 Mg And Valsartan 26 Mg Tablet , 11. Dental Drugs , Chlorhexidine Mouthwash Ip / Bp 0.2 O / O , Dental Gel Choline Salicylate 8.7 O / O, Benzalkonium Chloride 0.01 O / O, Lignocaine Hcl 2 O / O ( Flavoured Gel Base ) , Tooth Gel Sodium Monofluorophosphate 0.7 O / O And Potassium Nitrate 5 O / O ( In Flavoured Base ) , Gum Paint Containing Tannic Acid 2%, Cetrimide 0.1%, Zinc Chloride 1% , Metronidazole 1% And Chlorhexidine Gluconade 0.25% Gel , 12. Dermatological Drugs , Compound Benzoic Acid Ointment Ip Benzoic Acid 6 O / O + Salicylic Acid 3 O / O , Acyclovir Cream 5% , Cetrimide Cream Ip 15 Gm , Fusidic Acid Cream Ip 2% , Glycerin Ip 400 Gm , Liquid Paraffin Ip 400 Ml , Miconazole Nitrate Cream Ip 2% , Povidone Iodine Ointment 5% 15 Gm , Neomycin Bacitracin And Sulphacetamide Power ( Neomycin 5 Mg, Bacitracin 250 Units, Sulphacetamide 60 Mg ) , Silver Sulphadiazine Cream Ip 1% 50Gm Tube , Gentian Violet Topical Solution Usp 1O / O , Clotrimazole Mouth Paint ( Clotrimazole 1 O / O W / V ) , Beclomethasone, Neomycin And Clotrimazole Cream ( Beclomethasone Dipropionate 0.025 %, Neomycin Sulphate 0.5 % And Clotrimazole 1 % ) , Gamma Benzene Hexachloride Lotion 1% ( Lindane Lotion Usp ) , Betamethasone Dipropionate Cream Ip 0.05% , Betamethasone Lotion Ip 0.05 O / O , Clindamycin Phosphate Gel Usp 1 O / O , Clobetasol Propionate Cream 0.05 O / O , Glycerin Ip 100 Ml , Ketoconazole Cream 2% , Permethrin Lotion 5% , Permethrin Cream 5% , Tretenoin Cream Usp 0.025% , Coal Tar 6% & Salicylic Acid 3% Ointment , Calamine Lotion Ip 100Ml , Powder Clotrimazole 1% W / W 30 Gm , Terbinafine Cream 1% W / W ( 10Gm Tube ) , Olopatadine Hydrochloride Ophthalmic Solution 0.1 , Oitment Mupirocin Ip 2% , 13. Reagents And Diagnostic Agents , Multi Stix Test Strip , Anti A Blood Grouping Serum Ip ( Anti A Monoclonal Serum ) , Anti B Blood Grouping Serum Ip ( Anti B Mono Clonal Serum ) , Anti D ( Rh ) Blood Grouping Serum Ip / Anti D Blood Grouping Serum Ip , Diatrizoate Meglumine & Diatrizoate Sodium Inj Usp 60% ( Iodine Conc.= 292 Mg / Ml ) , Diatrizoate Meglumine And Diat Sod Inj Usp 76%W / V ( Iodine = 370 Mg / Ml ) , Gadodiamide Inj. 0.5Mml / Ml Vial , Vdrl Antigen ( With + Ve And - Ve Control ) / Rpr Slide Kit , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aquous Solution 300 Mg Iodine / Ml , Iohexol Usp ( Solution For Injection ) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine / Ml. , 14. Disinfectants And Antiseptics , Povidone Iodine Solution Ip 5 % 500 Ml , Compound Benzoin Tincture Ip , Formaldehyde Solution ( 34.5 Per. - 38 Per. ) , Gluteraldehyde Solution 2% , Hydrogen Peroxide Solution Ip 6 O / O ( 20 Vol ) , Lysol ( Cresol With Soap Solution ) Ip ( Cresol 50 O / O + Soap 50 O / O ) , Povidone Iodine Scrub Solution / Cleansing Solution 7.5 O / O W / V Povidone Iodine ( Suitable For Hand Wash ) , Surgical Spirit Ip / Bp ( 500 Ml ) , Chlorhexidine Gluconate Solution 5% 250 Ml , Surgical Spirit Ip / Bp ( 100 Ml ) , Povidone Iodine Solution Ip 5% 100Ml Bottle , Povidone Iodine Ointment Usp 250 Gm , Povidone Iodine Solution Ip 10 % , Silver Sulphadiazine Cream Ip 1% 500 Gm Jar , 15. Diuretics , Acetazolamide Tab Ip 250Mg , Frusemide Tab Ip 40 Mg , Furosemide Injection Ip 10Mg / Ml ( Im And Iv Use ) , Hydrochlorthiazide Tab Ip 12.5 Mg , Mannitol Inj Ip 20% W / V , Spironolactone Tab Ip 25Mg , Torsemide Tab 10 Mg , Hydrochlorthiazide Tab Ip 25Mg , Torsemide Inj 10 Mg / Ml , Spironolactone Tablets Ip 50 Mg , 16. Drugs For Ear Ailments , Ciprofloxacin 0.3 O / O And Dexamethasone 0.1 O / O Ear Drops Ciprofloxacin And Dexamethasone Otic Suspension Usp , Clotrimazole 1 O / O With Beclomethasone Dipropionate 0.025 O / O Ear Drops , Neomycin, Polymixin B And Hydrocortisone Ear Drops Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu, And Hydrocortisone 10 Mg Per Ml Neomycin And Polymixin B Sulfate And Hydrocortisone Otic Solution Usp , Ceruminolytic Drops ( Wax Dissolving Ear Drops ) Paradichlorobenzene 2 O / O , Benzocaine 2.7 O / O , Chlorbutol 5 O / O, Turpentine Oil 15 O / O , 17. Gastro Intestinal Drugs , Drotaverine Hydrochloride Inj 40 Mg / 2 Ml , Ointment Containing Lidocaine Ip 3 O / O Zinc Oxide Ip 5 O / O , Hydrocortisone Ip 0.25 O / O, Allantoin Ip 0.5 O / O , Antacid Tablets.Formula, Each Chewable Tablet Contains Magnesium Trisilicate 250 Mg, Dried Aluminium Hydroxide Gel 120 Mg, Peppermint Oil , Antacid Liquid, Each 5Ml Contains Dried Aluminium Hydroxide Gel 250 Mg, Magnesium Hydroxide 250Mg, Activated Polydimethyl Siloxane 50Mg , Bisacodyl Tab Ip 5 Mg , Dicyclomine Tab Ip 10 Mg , Dicyclomine Inj Ip 10 Mg / Ml , Dicyclomine Hydrochloride Oral Solution Ip 10Mg / 5Ml , Domperidone Suspension Ip 5Mg / 5Ml , Domperidone Tab Ip 10 Mg , Hyoscine Butylbromide Inj Ip 20 Mg / Ml , Loperamide Tab Ip 2 Mg , Metoclopramide Inj Ip 10Mg / 2Ml , Metoclopramide Tab Ip 10 Mg , Omeprazole Cap Ip 20 Mg , Ondansetron Inj Ip 2Mg / Ml , Ors Powder Ip , Pentoprazole Inj 40 Mg , Ranitidine Hcl Injection Ip 50Mg / 2Ml , Ranitidine Tab Ip 150Mg Film Coated , Sodium Phosphates Enema Bp Each 100Ml Contains Sodium Dihydrogen Phosphate Dihydrate 10 O / O Disodium Hydrogen Phosphate Dodecahydrate 8 O / O , Hyoscine Butyl Bromide Tablets Ip 10Mg , Drotaverine Tab Ip 40 Mg , Ranitidine Tab Ip 300Mg Film Coated , Dicyclomine Hydrochloride And Activated Dimethicone Suspension Each Ml Contains Dicyclomine Hydrochloride 10Mg Activated Dimethicone 40Mg , Dicyclomine And Paracetamol Tablets Dicyclomine Hydrochloride 20 Mg + Paracetamol 325 Mg Tablets , Metoclopramide Hydrochloride Syrup Ip 5 Mg / 5Ml , Domperidone Oral Drops 10Mg / Ml ( 10Ml ) , Drotaverine And Mefenamic Acid Tablets Drotaverine 80 Mg And Mefenamic Acid 250 Mg , Lactic Acid Bacillus Tab 60 Million Spores , Lactulose Solution Usp / Bp 10Gm / 15Ml Or 3.35 Gm / 5Ml , Liquid Paraffin Ip 100 Ml , Ondansetron Orally Disintegrating Tablets Ip 4Mg , Pantoprazole 40Mg And Domperidone 30Mg Sr Cap Pantoprazole As Enteric Coated Pellets And Domperidone As Sr Pellets , Ursodeoxycholic Acid Tablets 300 Mg , Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg Tablet ( Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , Prochlorperazine Mesylate Injection 12.5Mg / Ml 5Ml Size , Probiotic Sachets 1 Gm Size ( Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores ) , Mesalamine Tablet Usp 1.2 Gm Enteric Coated ( Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm ) , 18. Gout And Rheumatiod Arthritis , Allopurinol Tablets Ip 100 Mg , Hydroxychloroquine Sulphate Tablets 200Mg , Leflunomide Tablets Ip / Usp 10Mg ( Film Coated ) , Leflunomide Tablets Ip / Usp 20Mg ( Film Coated ) , Sulfasalazine Delayed Release Tablets Usp / Gastroresistant Sulfasalazine Tablets Bp 500 Mg , 19. Hormones Other Endocrine Drugs And Contraceptives , Biphasic Isophane Insulin Inj Ip ( 30 % Soluble Insulin And 70 % Isophane Insulin ) Inj. 40 Iu / Ml ( R-Dna Origin ) , Carbimazole Tabs Ip 5 Mg ( Film Coated ) , Carboprost Tromethamine Injection Each Ml Contains Carboprost 0.25 Mg / Ml , Clomifene Tab Ip 25 Mg , Clomiphene Tab Ip 50 Mg , Conjugated Estrogen Tabs Usp 0.625 Mg. , Dinoprostone Cream / Gel 0.5 Mg Dinoprostone In Syringe , Ethinyloestradiol Tabs Ip 50 Mcg , Glibenclamide Tab Ip 5 Mg , Gliclazide Tab Ip 40 Mg , Glimepiride Tab Ip 2 Mg , Glimepiride Tab Ip 1Mg , Glipizide Tab Ip 5Mg , Hydroxyprogesterone Inj Ip 250Mg / Ml , Isophane Insulin Inj Ip 40 Iu / Ml , Metformin Tab Ip 500 Mg ( Film Coated ) , Norethisterone Tab Ip 5 Mg , Pioglitazone Tab Ip 15 Mg , Progesterone Inj 200 Mg / 2Ml , Insulin Injection Ip ( Soluble Insulin / Neutral Insulin Injection ) 40 Iu / Ml ( R.Dna Origin ) , Thyroxine Sodium Tablets Ip 100Mcg , Metformin Hydrochloride ( Sustained Release Tablets Ip 1000 Mg , Glipizide And Metformin Hydrochloride Tablets Usp ( Glipizide 5 Mg, Metformin Hydrochloride 500 Mg ) , Glibenclamide And Metformin Hydrochloride ( Sr ) Tablets Glibenclamide 5 Mg, Metformin Hydrochloride 500 Mg ( Sustained Release ) , Metformin Hcl ( Sustained Release ) And Glimepiride Tab Metformin Hcl ( Sustained Release ) 500Mg , Glimepiride 1Mg , Metformin Hydrochloride ( Sustained Release ) And Glimepiride Tablets ( Metformin Hydrochloride ( Sustained Release ) 500 Mg, Glimipiride 2Mg ) , Glimepiride, Pioglitazone And Metformin Hydrochloride ( Sustained Release ) Tablets Each Tablet Contains Glimepiride 2Mg, Pioglitazone 15 Mg, Metformin Hydrochloride ( Sustained Release ) 500 Mg , Gliclazide And Metformin Tablets ( Gliclazide 80 Mg And Metformin Hcl 500 , Glucagon For Injection Usp 1 Mg / Ml , Medroxyprogesterone Acetate Tablets Ip 10 Mg , Thyroxine Tablets Ip 50 Mcg , Octreotide Injection 50 Mcg / Ml , Insulin Glargine 3Ml ( 100Iu / Ml ) With 15 Insulin Syringes And Needles / Cartridge 3Ml ( 100Iu / Ml ) With 15 Needles And 1 Pen Per 20 Cartridges , Tenaligliptin Tablet 20Mg , Insulin Glargine 10 Ml Vial ( 100 Iu / Ml ) With 30 Insuline Syringes With Needle , 20. Immunologicals , Human Anti D Immunoglobulin Injection 300Mcg ( Im Use ) , Human Anti D Immunoglobulin 150 Mcg , Human Rabies Immunoglobulin Inj 150 Iu / Ml , Rabies Vaccine Human ( Cell Culture ) Ip ( Intradermal ) 2.5 Iu , Rabies Vaccine Human ( Cell Culture ) Ip ( Intramuscular ) 2.5 Iu / Dose , Snake Venum Anti Serum Ip ( Lyophilized ) Polyvalent Anti Snake Venum, Serum Enzyme Refined.Contain Purified Equine Globulins.1 Ml Of Serum Neutralizes 0.6 Mg Of Cobra Venum, 0.45 Mg Of Common Kraite ( Bungaras ) Venum ( Details In Rc ) , Tetanus Immunoglobulin 250 Iu / Vial , Tetanus Vaccine ( Adsorbed ) Ip 5 Ml Vial , Rabies Antiserum Ip ( Equine ) 300 Units Per Ml Contains Equine Anti-Rabies Immunoglobulin Fragments ( I.M. / Sc Use ) , Diphtheria Antitoxin 10000 Iu , Hepatitis B Immunologlobin Injection Ip 200 I.U , Human Immunoglbulin Ing With 12% Lgm, 12%Lga , 76%Lgg In Pack Of 10 Ml ( 0.5Mg ) , 21. Muscle Relaxants And Cholinestrase Inhibitors , Atracurium Inj 10 Mg / Ml , Glycopyrrolate Inj Usp 0.2 Mg / Ml , Midazolam Inj Ip 1 Mg / Ml , Neostigmine Inj Ip 0.5 Mg / Ml , Neostigmine Tab Ip 15 Mg , Succinylcholine Inj. Ip 50 Mg / Ml ( Iv Use ) , Valethamate Bromide Inj 8Mg / Ml , Vecuronium Bromide For Injection 4Mg ( Freeze Dried ) , Chlorzoxazone , Diclofenac Sodium & Paracetamol Tablets ( Chlorzoxazone 250Mg , Diclofenac Sodium 50Mg Paracetamol 325 Mg ) , Neostigmine Injection Ip 2.5Mg / 5Ml , Cis Atracurium Besylate Injection 2 Mg / Ml In 5 Ml Vial , 22. Opthamological Preparations , Tropicamide Eye Drop Ip 1O / O , Atropine Eye Ointment Ip 1% , Atropine Sulphate Ophthalmic Solution Usp 1% , Chloramphenicol Eye Drops Ip 0.5 0 / 0 , Ciprofloxacin Eye Drops 0.3 O / O W / V , Ciprofloxacin Ophthalmic Ointment Usp 0.3% , Hydroxypropylmethyl Cellulose Solution 20 Mg / Ml , Tobramycin And Dexamethasone Ophthalmic Suspension Usp 0.3 O / O +0.1 O / O , Tobramycin Eye Drops 0.3% [ 331 ] , Tobramycin Ophthalmic Ointment Usp 0.3% , Flurbiprofen Sodium Ophthalmic Solution Ip 0.03 O / O W / V , Hyaluronidase Injection Ip Each Vial Contains Hyaluronidase Ip 1500 I.U. , Lidocaine Hcl Topical Solution Usp 4% , Fluconazole Eye Drops 0.3% , Timolol Eye Drops Ip 0.5 O / O W / V , Homatropine Eye Drops Ip 2% , Travoprost Eye Drops Ip 0.004 O / O , Brimonidine Tartrate & Timolol Maleate Eye Drops 0.15% + 0.5% , Betaxolol Eye Drops 0.5 O / O , Carboxymethylcellulose Eye Drops 0.5% , Phenylephrine Hydrochloride Opthalmic Solution Usp / Phenylephrine Eye Drops Bp 5% , Acyclovir Eye Ointment Ip 3% W / W 5Gm Size , Eye Drop Moxifloxacin 0.5% W / V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W / W Eye Ointment Ip, 3Gm Size , 23. Oxytocics And Antioxytocics , Isoxsuprine Inj Ip 5 Mg / Ml , Isoxsuprine Tab Ip 20 Mg , Methylergometrine Inj Ip 0.2 Mg / Ml , Methylergometrine Tab Ip 0.125 Mg , Misoprostol Tab Ip 200 Mcg , Oxytocin Inj Ip 5 Iu / Ml , Mifepristone Tab Ip 200Mg , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg ( Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg ) , Cabergoline Tablet Ip 0.5Mg ( Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg ) , Human Chorionic Gonadotropin Injection Ip 5000 I.U. , Leurprolide Acetate Depot 3.75 Mg , Leurprolide Acetate Depot 11.25 Mg , 24. Psychotropic Drugs , Alprazolam Tab Ip 0.25 Mg , Alprazolam Tab Ip 0.5Mg , Amitriptyline Tab Ip 25Mg Film Coated , Chlordiazepoxide Tablets Ip 10Mg , Chlorpromazine Tablets Ip 100 Mg ( Coated Tablet ) , Chlorpromazine Tablets Ip 25 Mg ( Sugar Coated ) , Chlorpromazine Tablets Ip 50 Mg ( Coated Tablets ) , Chlorpromazine Inj. Ip 25Mg / Ml , Diazepam Inj Ip 10Mg / 2Ml ( 1M / Iv Use ) , Diazepam Tab Ip 5 Mg , Escitalopram Tab Ip 10 Mg , Fluoxetine Cap Ip 20 Mg , Haloperidol Inj Ip 5 Mg / Ml , Haloperidol Tab Ip 1.5 Mg , Haloperidol Tab Ip 5 Mg , Imipramine Tab Ip 25 Mg ( Coated Tab ) , Imipramine Tab Ip 75 Mg ( Coated ) , Lithium Carbonate Tab Ip 300 Mg , Lorazepam Inj 2 Mg / Ml , Olanzapine Tab Ip 5 Mg , Risperidone Tab 2Mg , Risperidone Tab 1 Mg , Sertraline Tab 50 Mg , Trifluperazine Tab Ip 5 Mg Coated , Quetiapine Tablet Ip 50Mg , Quetiapine Tablet Ip 25Mg , Clonazepam Tablet 0.5 Mg , Levosulpiride Tablet 25 Mg ( Each Uncoated Tablet Contains Levosulpiride 25 Mg ) , Lorazepam Tablet Ip 2 Mg ( Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Zolpidem Tablet 5 Mg , 25. Drugs Acting On The Respiratory Tract , Aminophylline Inj Ip 25 Mg / Ml , Beclomethasone Inhalation Ip 200 Mcg / Dose , Budesonide Nebulizer Suspension 0.25Mg / Ml , Cough Syrup Each 5 Ml Contains Chloropheniramine Maleate Ip 3 Mg, Ammonium Chloride 130 Mg, Sodium Citrate 65 Mg, Menthol 0.5 Mg, Syrup Q.S. , Ipratropium Bromide Nebulizer Solution 250 Mcg / Ml , Salbutamol Tablet Ip 4 Mg , Salbutamol Inhalation 100 Mcg / Dose , Salbutamol Nebuliser Solution Bp 5 Mg / Ml , Salbutamol Tab Ip 2 Mg , Theophylline And Etofylline Injection ( Anhydrous Theophylline 50.6Mg + Etofylline 169.4 Mg ) , Theophylline And Etofylline Tablets ( Theophylline Ip 23Mg + Etofylline 77 Mg ) , Theophylline Tablet 400Mg Sustained Release / Controlled Release ( Theophylline Prolonged Released Tablet Ip ) , Salbutamol Syrup Ip 2Mg / 5Ml , Dextromethorphan Hbr Syrup Ip 13.5Mg / 5Ml , Saline Nasal Solution ( Drops ) ( Sodium Chloride 0.65 O / O ) , Formoterol Fumerate & Budesonide Powder For Inhalation Ip 6 Mcg + 200 Mcg , Budesonide Powder For Inhalation 200 Mcg , Ipratropium Powder For Inhalation Ip 40 Mcg , Terbutaline Tablets Ip 2.5 Mg , Xylometazoline Nasal Drops Ip 0.1% , Cough Syrup / Expectorant ( 50 ) Ml , Acebrophylline Tablet 100 Mg , 26. Solution Correcting Water Electrolyte And Acid Base Disturbance , Compound Sodium Lactate Inj. Ip , Dextrose Inj Ip 25% W / V , Dextrose Inj Ip 10% , Dextrose Inj Ip 5% , Multiple Electrolytes And Dextrose Injection Type I Ip ( Electrolyte P Injection , Multiple Electrolytes And Dextrose Injection Type Iii Ip Electroylte M Injection ( I.V. ) , Potassium Chloride Inj. 0.15 Gm / Ml , Potassium Chloride Oral Solution U.S.P 500Mg / 5Ml , Sodium Chloride And Dextrose Injection Ip 0.9 O / O + 5 O / O , Sodium Chloride Inj Ip 500 Ml , Sodium Chloride Injection Ip 100 Ml , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W / V Polypack 500 Ml , 27. Drugs For Urology , Finasteride Tablets Ip 5 Mg , Tamsulosin Hcl Tablets / Capsule 0.4 Mg , Flavoxate Tablets Ip / Bp 200 Mg ( Coated Tablet ) , Savelamer Carbonate Tablet 400 Mg ( Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg ) , Sodium Bicarbonate Tablet Usp 1 Gm ( Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm ) , Levamisol Hydrochloride Tablet Ip 50 Mg ( Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg ) , Phenazopyridine Tablet 5 Mg , Dutasteride Tablet 0.5 Mg , Alkylizer Syrup 1.4 Gm / 5 Ml ( 100 Ml ) ( Disodium Hydrogen Citrate ) , 28. Antivertigo , Betahistine Tab Ip 8 Mg , Betahistine Tab Ip 16 Mg , Cinnarizine Tablets Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , 29. Vitamins And Minerals , Ascorbic Acid Tab Ip 500 Mg , Calcium Gluconate Inj Ip 10% ( Iv Use ) , Ferrous Sulphate With Folic Acid Tab Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Equiv 100 Mg Elemental Iron And Folic Acid Ip 0.5 Mg , Ferrous Sulphate With Folic Acid Tab ( Paediatric ) Ip Each Film Coated Tab. Containing Dried Ferrous Sulphate Ip-Eqivalent To 20Mg Elemental Iron And Folic Acid Ip-100 Mcg , Folic Acid Tab Ip 5 Mg , Multivitamin Drops Each Ml Contains Vit A 3000 Iu, Vit D3 300 Iu, Vit B1 1Mg, Riboflavine Phosphate Sodium 2Mg, D-Panthenol 2.5Mg, Niacinamide 10Mg, Pyridoxine Hcl 1Mg, Cyanocobalamin 1Mcg, Lysine Hcl 10Mg , Multivitamin Tablets Nfi Formula Sugar Coated Vit A 2500 Iu Vit B1-2Mg Vit-B6-0.5Mg Vit-C-50Mg Calcium Pantothenate-1Mg Vit-D3-200Iu Vit-B2-2 Mg Niacinamide-25Mg Folic Acid-0.2 Mg , Vitamin B Complex Inj Nfi , Vitamin B Complex Tablet Nfi ( Prophylactic ) B1 2Mg B2-2Mg B6- 0.5Mg Niacinamide 25Mg Calcium Pantothenate 1Mg ( With Appropriate Overages ) , Vitamin A Paediatric Oral Solution Ip ( Vitamin A Concentrate Oil Ip ) Each Ml Contains Vitamin A 100000 Iu , Calcium And Vitamin D3 Suspension ( Each 5 Ml Contains Calcium Carbonate Equivalent To Elemental Calcium 250 Mg, Vitamin D3 125 Iu ) , Iron And Folic Acid Suspension. Each 5Ml Contains Ferrous Fumerate Equivalent To Elemental Iron 100Mg, Folic Acid 500 Mcg , Zinc Sulphate Dispersible Tablets Ip Elemental Zinc 10 Mg , Iron Sucrose Injection Usp / Bp 20Mg / Ml ( For Iv Use ) Each Ml Contains Ferric Hydroxide In Complex With Sucrose Equiv. To Elemental Iron 20 Mg , Calcium With Vitamin D Tablets Usp / Calcium And Colecalciferol Tablets Bp / Calcium And Vitamin D3 Tablets Ip ( Elemental Calcium 500 Mg, Vitamin D3-250 Iu ) ( Non-Chewable ) , Cholecalciferol Granules 60, 000 Iu / Gm , Mecobalamin Inj 500 Mcg / Ml , Pyridoxine Tablet Ip 10 Mg , Pyridoxine Tablet Ip 40Mg , Thiamine Tablets Ip 100 Mg , Calcitriol Capsules Ip 0.25 Mcg , Methyl Cobalmine Tablet 500Mcg , Methyl Cobalmine Tablet 1500Mcg , Vitamin D3 Oral Solution 60000 Iu , Ferric Carboxymaltose Injection 50 Mg / Ml 10 Ml Size , Multi Vitamin Syrup , 30. Miscellaneous Drugs , Flunarizine Tab 5 Mg , Black Disinfectant Fluid ( Phenyl ) As Per Schedule O Grade Iii , Conc Haemodialysis Fluid B.P Acetate Concentrate 10 Litre Can , Peritonial Dialysis Solution Ip , Sodium Bicarbonate Inj Ip 7.5% W / V , Water For Inj Ip , Alendronate Sodium Tablets Usp / Bp 35 Mg , Mannitol With Glycerin Injection 10 O / O + 10 O / O W / V ( For Intravenous Infusion ) , Normal Human Intravenous Immunoglobulin 5G / 100Ml , Pregabalin Cap Ip 75 Mg , Surfactant For Intratrecheal Instillation ( Natural Bovine Lung Surfactant ) , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate In 10 Litre Cans , Intravenous Fat Emulsion 20% W / V 250Ml , Pyridostigmine Tablet Usp 60 Mg ( Each Tablet Contains Pyridostigmine Usp 60 Mg ) , Caffeine Citrate Usp Injection 20Mg / Ml ( Equivalent To 10 Mg Caffeine Base / Ml ) 3Ml Size , Amino Acid 10% Injection 100Ml Size , Vitamin E Capsule 400 Mg , Inj Practant Alpha 80 Mg / Ml In Pack Of I05 Ml ( Detail In Rc ) , 31. Absorbable Sutures , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 40 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 20 Mm Length 76 Cm ) Size -3 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 30 Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 40Mm Length 76 Cm ) Size -1 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 3 / 8 Cir Rb Needle 30 Mm Length 76 Cm ) Size-2 / 0 , Absorbable Surgical Suture ( Sterile Catgut ) Bp / Usp Needled Suture Chromic ( 1 / 2 Cir Rb Needle 45 Mm Length 100 Cm ) Size-1 , Absorbable Surgical Suture ( Sterile Catgut ) , Needled Suture Chromic Size-3 / 0 ( 3 / 8 Cir Rcutting Needle 26Mm, Length 76 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size - 3 / 0 1 / 2Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) 1 / 2 Cir Rb Needle Size-1 / 0 30Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 1 1 / 2 Cir Tapercut Needle ( Heavy ) 40Mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 1 / 2 Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-3 / 0 ( 1 / 2 Cir Conventional 25Mm Length 90 Cm ) Undyed , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 ( 1 / 2 Cir Rb Needle 20Mm Length 70 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-2 / 0 1 / 2 Cir Rb Needle 40Mm L 90Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-1 / 0 ( 1 / 2 Cir Rb Needle 40Mm Length 90 Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size 3 / 0 3 / 8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled ( Braided ) Coated Polyglactin / Polyglycolic Acid / Poly ( Glycolide-Co-L-Lactide ) Size-4 / 0 3 / 8 Circle Cutting 16Mm Needle, Suture Length 70Cm , Chromic Catgut Suture ( 3 / 8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm ) Size 5 / 0 , Chromic Catgut Suture ( 3 / 8 Cir Cutting Needle 8 Mm, Suture Length 35 Cm ) Size 6 / 0 , Chromic Catgut Suture ( 3 / 8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm ) Size 4 / 0 , 32. Non Absorbable Surgical Suture Sterilised Surgical Needled Suture , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 1 / 2 Cir Rb Needle 20Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 3 / 0 ( 3 / 8Cir Reverse Cutting Needle 26Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Black Braided Silk Size 2 / 0 ( 3 / 8Cir Reverse Cutting Needle 45Mm, Length 76 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 8 / 0 ( 3 / 8 Cir Micropoint Round Body , 6Mm Length 38 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 3 / 0 ( 3 / 8 Conventional Cutting Needle 16Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 4 / 0 ( 3 / 8 Conventional Cutting Needle 19Mm Length 60 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 5 / 0 ( 3 / 8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 2 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 1 / 0 ( 3 / 8 Cir R Cutting Needle 45Mm Length 70 Cm. ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb 13 Mm Needle, Length 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8Cir Rb Taper Point Double Needle 9.3Mmlength 60 Cm ) / ( 3 / 8Cir Rb 16 Mm Needle, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 7 / 0 ( 3 / 8Cir Rb Double 8Mm Needle, Length 60 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 3 / 8Cir Rb 16 Mm Needle, Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 / 0 ( 1 / 2 Cir Rb Needle 30Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy Needle 45Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Cir Rb Double Needle 17Mm Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Tapercut Double Needle 17Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Rb Needle 30Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Tapercut Needle 17Mm Length 75 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Cir Tapercut Needle, 25 Mm Length 90 Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 6 / 0 ( 3 / 8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Cir Rb Needle 16 Mm Length 70 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 3 / 8 Cir Cutting Needle 25Mm Length 45 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Rb Heavy 40Mm, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 1 ( 1 / 2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 8 / 0 ( 3 / 8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 4 / 0 ( 1 / 2 Circle Tapercut 13Mm Double Needle 70Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 5 / 0 ( 1 / 2 Circle Cc 13Mm Needle, Suture Length Of 70Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 2 / 0 ( 1 / 2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Monofilament Polypropylene Blue Size 3 / 0 ( 1 / 2 Cir Rb Needle 25Mm, Suture Length Of 75Cm ) Double Arm , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 4 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 75 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided White Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture, Sterilised Needled Polybutylate / Silicon Coated Polyster Braided Green / Blue Size 2 / 0 ( 1 / 2 Cir Tapercut , 17 Mm Double Needle, Length 90 Cm ) , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2 / 0 1 / 2 Circle Taper Cut, 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture Sterilized Needled Polybutylate / Silicon Coated With Polyster Braided ( Green / Blue ) Size 2-0 1 / 2 Circle Taper Cut, 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X 1.5Mm , Non Absorbable Surgical Suture, Sterilised Needled Coated Polyster Braided, Green / White Or Blue / White Coated Polyster Braided ( Green / Blue ) With Size 3 / 0 1 / 2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm , Non Absorbable Surgical Suture, Sterilised Needled Polyamide Monofilament Black ( Nylon ) Size 10 / 0 ( 3 / 8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , B.B Silk Suture ( 3 / 8 Cir Rb Needle 20Mm, Length 76 Cm Size 4 / 0 , B.B Silk Suture ( 3 / 8 Cir Rb Needle 16Mm, Length 76 Cm Size 5 / 0 , 34. Polyglecraprone 25 Monofilament Sutures , Absorbable Surgical Sutures, Sterilised Needled Polyglecaprone / Polyglyconate, Monofilament Sutures Size 2 / 0 ( 1 / 2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilament Polyglecaprone / Polyglyconate, Size 3 / 0 ( 1 / 2 Circle Ovalrb Contrast Needle 26Mm, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 4 / 0 ( 1 / 2 Circle Cutting 16Mm Needle, Suture Length 70Cm ) , Absorbable Surgical Sutures Sterilised Needled Monofilamentpolyglecaprone / Polyglyconate Size 3 / 0 ( 3 / 8 Circle Cutting 25Mm Needle, Suture Length Of 70Cm ) , 35. Monofilament Polydioxanone Suture , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 ( 1 / 2 Circle Reverse Cutting 50 Mm Length 90Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 2 / 0 ( 1 / 2 Circle Rb 31Mm Needle, Length 70Cm ) , Absorbable Surgical Suture ( Synthetic ) Sterilised Needled Suture Monofilament Polydioxanone Violet Size 1 / 0 ( 1 / 2 Circle Rb 30Mm Needle, Length 70Cm ) , 36. Antibacterial Coated Suture , Absorbable Surgical Suture ( Synthetic ) Antibacterial Coated Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 2 / 0 1 / 2 Circle Round Bodied 30Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 1 / 2 Circle Reverse Cutting, Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 1 / 0 1 / 2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 1 / 2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture ( Synthetic ) Antibacterial With Sterilised Needled Suture ( Braided Coated Polyglactin / Polyglycolic Acid Violet ) Size 3 / 0 3 / 8 Circle R Cutting, Ps-1, 24Mm, Suture Length 70 Cm , 37. Surgicals , Absorbable Gelatin Sponge 80 X 50X 10Mm , Absorbent Cotton Wool Ip 500 Gm ( Net Weight ) , Ortho Cotton Roll 5 Inch200 Gmortho C ( Net Weight ) , Ortho Cotton Roll 10 Inch500 Gmortho C ( Net Weight ) , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set Blood Transfusion Set , Gloves Size 6.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 6.5 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 7 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 7 Inches, Powder Free ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 7.5 Inches, Powdered ( Disposable Sterile Surgical Rubber Gloves ) , Gloves Size 7 .5Inches, Powder Free ( Disposablesterile Surgical Rubber Gloves ) , Suction Catheter, Sterile.Size: Fg 5 , Suction Catheter, Sterile. Size: F G-6 , Suction Catheter, Sterile. Size: F G-8 , Suction Catheter, Sterile. Size: F G-10 , Suction Catheter, Sterile. Size: F G-12 , Suction Catheter, Sterile. Size: F G-14 , Suction Catheter, Sterile. Size: F G-16 , Suction Catheter, Sterile. Size: F G-18 , Suction Catheter, Sterile. Size: F G-20 , Suction Catheter, Sterile. Size: F G-22 , Catheter, Size 8 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 10 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 16 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 18 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 20 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 22 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Catheter, Size 24 ( Foleys Ballon Catheter Sterile, 2 Way For Urinary Drainage, Single Use, ) Silicon Coated Natural Latex Material , Infant Feeding Tube Size 10Fg , Infant Feeding Tube Size 8Fg , Infant Feeding Tube Size 5Fg , Perfusion Set With Airway And Needle, ( Adult Use ) Sterile Disposable , Perfusion Set ( Infusion Set ) With Airway And Needle ( Paediatric Use ) Sterile Disposable , Infusion Set With Microdrip, ( I.V. ) Sterile Disposable , Insulin Syringe ( 40 Units ) With ( Fixed ) 30 G Needle Shall Conforn To Is 12227 , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 16G , Sterile Disposable ( Single Useteflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 20 G , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock.Size 22G , Sterile Disposable ( Single Use ) Teflon / Ptfe I.V. Cannula Without Port Size 24G , Mucus Extractor Sterile , Nasal Oxygen Set, Twin Bore All Sizes Adult , Nasal Oxygen Set, Twin Bore All Sizes Paediatrics , Paper Adhesive Plaster 1 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 2 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Paper Adhesive Plaster 3 Inch X 9.0 Mts ( With Cutter ) Non Woven Adhesive Tape , Plaster Of Paris Bandage 15Cm X 2.7 Mts / Roll , Plaster Of Paris Bandage 10Cm X 2.7Mts , Ryles Tube / Nasogastric Tube Size: 10 , Ryles Tube / Nasogastric Tube Size: 12 , Ryles Tube / Nasogastric Tube Size:14 , Ryles Tube / Nasogastric Tube Size: 16 , Ryles Tube / Nasogastric Tube Size: 18 , Scalp Vein Set ( Disposable ) Size 18G , Scalp Vein Set ( Disposable ) Size 20G , Scalp Vein Set ( Disposable ) Size 22G , Scalp Vein Set ( Disposable ) Size 24 G , Syringe 2 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable , Syringe 5 Ml Hypodermic With Needle Attached 24G, Sterile, Single Use Disposable , Syringe 10 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable , Syringe 20 Ml Hypodermic With Needle Attached 22G, Sterile, Single Use Disposable , Surgical Blade Sterile, Size 11 , Surgical Blade Sterile, Size 15 , Surgical Blade Sterile, Size 22 , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 11-15 , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 1-5 , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 16-20 , Suture Needles Curved 1 / 2 Circle Round Body Assorted Size 6-10 , Suture Needles Curved And Cutting 1 / 2 Circle Cutting Size 6-10 , Suture Needles Curved And Cutting 1 / 2 Circle Size 11-15 , Suture Needles Curved And Cutting 1 / 2 Circle Size 16-20 , Suture Needles Curved And Cutting Size 1-5 , Sterile Disposable Spinal Needle For Single Use. 22G X 3 1 / 2 Inch , Sterile Disposable Spinal Needle For Single Use. 25G X 3 1 / 2 Inch , Urine Collecting Bag, Disposable 2000 Ml , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm , Endotracheal Tube, Plain - Size 2.5 , Endotracheal Tube, Plain - Size 3 , Endotracheal Tube, Plain - Size 3.5 , Endotracheal Tube, Plain - Size 4 , Endotracheal Tube, Plain - Size 4.5 , Endotracheal Tube, Plain - Size 5 , Endotracheal Tube, Plain - Size 5.5 , Endotracheal Tube, Plain - Size 6 , Endotracheal Tube, Plain -Size 6.5 , Endotracheal Tube, Plain - Size 7 , Endotracheal Tube, Plain - Size 7.5 , Endotracheal Tube, Plain - Size 8 , Endotracheal Tube, Plain - Size 8.5 , Endotracheal Tube, Cuffed - Size 4 , Endotracheal Tube, Cuff - Size 4.5 , Endotracheal Tube, Cuff - Size 5 , Endotracheal Tube, Cuff - Size 6 , Endotracheal Tube, Cuff- Size 6.5 , Endotracheal Tube, Cuff - Size 7 , Endotracheal Tube, Cuff - Size 7.5 , Endotracheal Tube, Cuff - Size 8 , Endotracheal Tube, Cuff - Size 8.5 , Endotracheal Tube, Cuff - Size 9 , Tracheostomy Tube, Plain - All Sizes , Tracheostomy Tube ( Pvc ) , Cuffed - All Sizes , Abdominal Drain Kit ( With Collection Bag 2000 Ml Size 24 , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) Size 28 , Abdominal Drain Kit, Sterile, Having Drainage Cather And Collection Bag ( 2000 ) Ml Size 32 , Corrugated Drainage Sheet - All Sizes , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.6Cm X 15Cm Or 7.5Cm X 15Cm , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cm X 15 Cm , Sterilized Umbilical Cotton Tape Width 3 Mm, Length 75 Cm , Bone Wax Sterilised , Temporary Cardiac Pacing Wire ( Electrode ) Sterile ½ Cir, Tapercut, 26 Mm; Reverse Cutting 60 Mm , Skin Graft Knife Blade ( Sterile ) & Handle , K Wire, Length 375 Mm; 1Mm , K Wire, Length 375 Mm; 1.6Mm , K Wire, Length 375 Mm; 1.8Mm , Face Mask, Disposable , Surgical Cap Disposable ( For Surgeons ) , Surgical Cap, Disposable ( For Nurses ) , Foldable Intra Ocular Lense With Injector 11 To 17.5 , Foldable Intra Ocular Lense With Injector18 To 24 , Foldable Intra Ocular Lense With Injector 24.5 To 28.5 , Standard Pama Intra Ocular Lenses 11 To 17.5 ( Pc-Iol ) , Standard Pama Intra Ocular Lenses ) 18 To 24 ( Pc-Iol ) , Standard Pama Intra Ocular Lenses24.5 To 28.5 ( Pc-Iol ) , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powdered , Disposable Sterile Surgical Rubber Gloves Size 8 Inches, Powder Free , Rubber Examination Gloves, Non-Sterile, Extra Small , Rubber Examination Gloves, Size Small , Rubber Examination Gloves, Size Medium , Rubber Examination Gloves Made Of Natural Rubber Latex, Non-Sterile, Size Large , Pressure Monitoring Line / High Pressure Extension Line , Urine Collecting Bag For New Born / Paediatric Urine Collection Bag, Capacity 100Ml , Umbilical Catheter For New Born, All Sizes - , Umbilical Cord Clamp , Absorbable Oxidized Regenerated Cellulose Netsize 2 X 3 Topical Absorbable Haemostatic Bactericidal Property , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 16 , Close Wound Drainage Device Under Negative Pressure ( Closed Wound Suction Unit ) Size Of Bellow 800 Ml, Catheter Size 18 , T-Tube For Common Bile Duct Drainage, Length 20X60 Cm, Size- , Bone Cement , Sanitary Napkin Beltless , Sanitary Pads Belt Type , Sanitary Napkin Beltless With Wings , Oxygen Mask ( Adult ) , Oxygen Mask ( Pediatric ) , Foleys Catheter No. 14 , Nelaton Catheter Size 14 Fg , Ecg Electorde ( Details In Rc ) , Surgical Blade Sterile, Size 23 Single Peel Package In Metal Foil As Per Is3319 ( Details In Rc ) , Sterile Hyoidemic Syringe With Needle Attached 22 G Single Use 50 Ml ( Details In Rc ) , Urethralcatheter 90 ( Fg-14 ) Made Of Medical Grade Pvc ( Details In Rc ) , Urethralcatheter 91 ( Fg-10 ) Made Of Medical Grade Pvc ( Details In Rc ) , Vaccum Suction Set, 2.5Meter Length ( Details In Rc ) , Epidural Minipack 18G, 80Mm-90Mm, Metal Stylet For Single Use Only, Sterile ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm ( Longline Iv ) ( Detail In Rc ) , 3 Way Stop Cock , Non Pyrogenic And Single Use, Should Be Leak Proof, With Smooth Movements ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 10Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 50Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 100Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , 3 Way Stop Cock With Extension Tube ( Vein-O Extension Line ) Size 150Cm ( Non Pyrogenic & Single Use ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 16 ) ( Detail In Rc ) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag ( 2000 Ml ) ( Size 20 ) ( Detail In Rc ) , Nasal Pronge Neonatal ( Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube ( Detail In Rc ) , Elastic Adhesive Bandage Bp 10Cm X 1Mtr Stretched Length Adhesive Material Should Have Good Quality Sticking Property ( Detail In Rc ) , Sterile Disposable ( Single Use Teflon / Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Ventilator Without Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Large Size For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Covering ( Nose & Mouth ) Mask Adult Medium Size For Bipap With Vent ( Detail In Rc ) , Niv Mask ( Noninvasive Ventilation Mask ) Oro Nasal Mask Paediatric With Bronchoscopy And Co2 And O2 Port With Chin Support ( Detail In Rc ) , Nebulization Mask Adult ( Detail In Rc ) , Nebulization Mask Paediatric ( Detail In Rc ) , Chemotherapy Port And Non-Coring Needles ( Adult ) ( Detail In Rc ) , Chemotherapy Port & Non-Coring Needles ( Pediatric ) ( Detail In Rc ) , 38. Swine Flu Drugs , Oseltamivir Capsule Ip 75 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir Capsule Ip 45 Mg Capsule ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir Capsule Ip 30 Mg ( Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , Oseltamivir Phosphate For Oral Suspension Ip 12 Mg / Ml ( Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution ) , 40 Anti-Malerial Drugs , Act Kit Containing 3 Tablets Of Artesunate ( 25Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 250Mg+12.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 50 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 100 Mg Each ) And 1 Tablet Of Sulphadoxine And Pyrimethamine ( 750Mg+37.5Mg ) , Act Kit Containing 3 Tablets Of Artesunate ( 150 Mg Each ) And 2 Tablet Of Sulphadoxine And Pyrimethamine ( 500Mg+25Mg ) , Each Combi Bliste Pack: Containing 3 Tablets Of Artesunate ( 200 Mg Each ) And 2 Tablet Of Sulphadoxine Pyrimethamine ( 750Mg+37.5Mg ) Each Or 3 Tablets Of Sulphadoxine Pyrimethamine ( 500+25 ) Mg , Group Name ( 1 ) :: 42 Covid19 , Liposomol Amphotericine Injection B 50Mg , Group Name ( 2 ) :: Eye , Creseent 2.5Mm , Lens Tip 15 Dgree Angal , Kerotone 2.8Mm , Needle No.26 , Needle No.24 , Pilo Carpine Nittrate 0.5% Injection , Drop Proparacaine Hcl Opthalmic Solution 0.5% , Droptropicamide With Phenylephrine Opthalmic 5 Ml Solution , In R, L. 500Ml Glass Bottle ( Compund Sodium Lactate Injection 500Ml ) , Korsolex Rapid 500Ml ( Glutaraldehyde 15 Gm 1.6 Dihydroxy 2.5 Dioxahexane 19.7 Gm Rust Inhibitions ) , Trypen Blue Dye 2Ml , Gauzethan Unmedicated ( 120Cmx9mtr ) Weight 325 Grm , Ordinary Bandage ( 15Cmx4mtr ) Weight 412 Grm , Ordinary Bandage ( 10Cmx4mtr ) Weight 275 Grm , Amphoter Jcin B Ip Gel 1, 0 Mg Each Gnp Contain Amphoteticinb L0mg Gel , Crotaniiton 10% * Hvdrocortjsone 0.25% Cream , Methottexate Gel 1% , Eflomithine Hydrochlori De Eteam 139 Rug, Each Gm Contain Eflomithine Hydrochloride139 Rna , Beclomethasone Dipropionat°0.064%+ Salycylic Acid 3% Lotion , Metlioxsalcn1% Lotion. Each Ml Contain Metfioxsaten1% , Deca Peptide 6 Mg Lotion. Each Nil Contain Dcca Peptide 6 Mg , Minocycline .5Omg , Trioxsalen 5Mg Tabeech Film Coded Tablei Contain Trioxsaleu5mg , Trioxsalen 25Mg Tab. Each Film Coated T8blet Contain Trioxsalen 25Mg , Trichlotoacctic Acitl ( Tca ) 50% W / V Lction , Jnj.Hvian G F 20 , Hepflto Protective Tablet Each Film Coated Tablet To Contain.Matadoxine 500Mg, Silyaarin L40mg, L-Ornithine L-Aspertatc 15Oing, P Yridoxiue H Ydrochloride 3Mg, Rolle Acid 1.5Mg , Spores Of Polyantib Iotic-Resistant Bsci Plus Clausii-2Billion Capsules , Iron As Ferric 8Acchaiate Rind Phospholipidclewable Tablets- ( In Micro Encapsulatedtorn ) 75 Nag Crt. To Elementaliron30 Mg Phospholipid167 Mg Uq. To Phosphatidylserine 100 Mg , Cojugated Cstrogen 0.3 Na G Ta6.Each Tablet Contain 0.3 Mg Co Jugated Cstrogen , Telinisarien40mg *Hydroclorothiazirlcl 2.5 Nag J.P.Eachiab1et Contain Felniisartan40nlg *Hydroclor Ithiazide 12. 5 My , 1 Elmisartan80mg *Idydroclorothiazide25 Nag, L.P.Each Tablet Contain 4Cin1isartau80mg *Hydroclorithiazide 25 Mg, , Mefenunic Acid *5Omg* Dicyclomine Hytlrochlotidel0mg Each ’1Nb1et Contain Mefcn+Imie Acid 25 Omg* Dicyelominthyarochloride 1Omg , Conibik It Oi ( Lab Fjueonazole 15 F ) Ing *Azithromyci0lgm A Secnidazcl E I Gm ) Fach Kit Containltab Tñuconazolel S0mg *1 Tab Azjthromycin1 Gn & 2 Tab.Secnidazcle Lgm , Dolutegravir 50, Each Film En &-Tablet Contain Doltltegrevir Sodium 50 , Tcnofovtr 300J-La Nivudinc300.Fach Film Coated Tabtet Contain Teno Fovir Di.Soproxiltiimerete30 Oing& Lamivudine300mg , Fitavirenz 600 Each Film Coated Tablet Contsin Efavircnz 6 ( ) 0 Mg , Nwirapine 200 Each Tebltt Containnevirnpine 200Mg , Atazanavit3 00*Ritonflvir 100, Eachtablet Contain Atazanavir Sulphate 30Ftnag*Ritonavir Ip100mg , Tenofovir Alafinamide25*F Mtrieitsbine20o+ Doultegravir5 0 Each Tablei Contain Âeno Tovifat Atinamide25mg *Lmtncitabine200nagsdoultegmvi 50Mg , Abacavii300 Eachtablet C‹›Ntain Abacavir 300Me Tp , Eainivudinet00 Lach Tablet Contain 1.Amivudine 100 Mg , Raltegravir 400F.Ach Film Coated Tablet Contain Ltaltcgravir 400 Mg , Zidmvudine 6Fh- Semi Udinc 30 , Ultrasoundcontrast Acent ( Sulphur Hexafluoride ) Sonovue , Contrast For Ct Scan / Ivp / Special Investigations , Iopamidolctcontrast Solution For In Jectiuon , Iopamidol Ct Contrast Solution For Injectiuon , Contrast For Special Investigations ( Barium Sulphate Powder ) , Contrast For Special Investigations ( Barium Sulphate Pow Dcr ) , Contrast For Specialinvestigations ( Barium Sulphate Suspension ) High Density Low Viscosity , Contrast For Special Investigations ( Barium Sulphide Suspension ) High Density Low Viscosity , Contrast Forspecial Investigations ( Barium Sulphate Paste ) , Oral Contrast For Mri ( Ferric Ammonium Citrat / Mineral Oil / Corn Oil , Oral Contract Forct { Diatnzoate Sodium & Diatrozoatemeglumine ) , Lopromidc Ct Contrast Usfda / Ceapproved , 1Oproinidc Ct Contrast Usfda / Ceapproved , Lodixanol Ct Contrast 320 Rugi / 100R1 In Polypropylenebottle Usfda Approved , Lodixanolm Content 320 Rugi / L00mlin Polypropylenebottle Us Fda , Lolrolonct Contrastusfd.Nice Approved , Lotrolon Ct Contrastusfda / Ceapproved , Venlafaxime Teb. , Olanzapinein J. , Flupcntixolini. , Memantine Tab , Glycopyrrolate Tab. , Pramipexole Tab. , Pramipexole Tab. , Pramipexole Tab. , Injpropofol Mct / Lct With Oleic Acid Inj.Iv , Inj.Paracetamol Infusion 1000 Mg In Double Sterilisedclosed System L00% Biodegradable Eco Friendly Polyolefin100 Ml Bag , Nalbuphine Inj . , Chlorprocaine Inj. , Desflurane 100M1 , Geloufusion Infusion , Albumin5% Infusion , Inj.0.9% Norlral Saline500 Ml In 100% Hiodegradeble Non Delip Double Stmilizcdpoll Oletiii Closedsvstcm Bag , Inj0.9% Normal Seline 1000 Nil In L 00% Biodcgradable Non Dehp Double Sterilixzdtxilyolefin Closed System Bae , Inj. Ringers Lactate 500 Ml In 100% Bioflegra6able N On Dehp Double Sterilised Pojyolefin Closed Svstenabag , Inj. Fingers Lactatc1000 Ml Ini 00•Z» Biodegradablenondc -Ip Doc Ble Steril Ixcd Polvolefin Closed System Bag , Inj5% Dextrose 500 Ml In 10 0% Biodegradablenon Dfhp Double Sterilizcdpolvole Tin Closed Systembag , Inj. 5% Dns S00 Rrtl In 100% Bi Odcgrad Able Non Dehp Double Sterilised Polvole Fin Closed System Bag , Lnj. 0.9% N Ormaj Saline 10 0 Nil In 100% L›Iodegradable Non Dell P Dou Bie Sterilised Polyolefin Closed Systembag , Balance Salt Smutton With Ph. Of 7.2 To 7.4 Osmolarity 292 To 294 In 100% Biodegradable Double Sterilised Cl Ose0 Systemqulyotcfin 500 Ml Bag , Litj. Balance Hydroxy Ethyl 6% Tetra Starch 130 / 0. 4 In Plasma Adapted Solution500 Ml 100* Biodegradable Dag With Polyoletin , Lnj Hydroxy Ethyl 6% Tetrastarch130 / 0.4In Nacl500 Ml 100% Biodegradable Bag , Nifedipine Sublingual , Nifedipine Sublingual , Papaverine Inj. , Nicerdipinetab. , Topical Heparin Solution1000lu / Ml , Anti -Gasgangrene Scre 25000 I U / I Oinl Each Vial Contains- Closttidium Perferingcns Anti-Toxin 10000 Iu + Clostridiiim Ocderuetiens Antitoxin10000 1U *Clostridiuni Septicum Anti Toxin S000 Lu ) , Basiliximab 20 Mg Inj , Betamethisone And Neomvciacream 10.10%+0 5% ) , Solution Silver Nitrate 2% , Solution Silver Nitrate 5% , Solution Silver Nitrate 10% , Alkeline Nasal Douches ( Sodiumbicnrbonat + Sodium Biborate+ Sodium Chloride ) , Eer Drops Hydrocortisone 1%W / V A Cctic Aci 2%W / V , Ear Drops Each Ml Contain Cfiloramphenicol 4Mg + Dexamethasone1 Mg *Polymvxin B I 50001U ) , Nasal Drops Haeincosgulase Topical Solutioneach Nil Contain Aqueous Solution Othaemocoagluese 0.2 Cu , Triemcinolone Oroniucosal Paste B P 0. 1 % W / W , Ethiodizcd Oil ( Lipiodol ) Inj. , Htk Solution 1 Lit ( Hisiiiline - Tryptophan-Ketogluiarate Solutions ) , Glvcopeeyleted Extendedhalf Life Nonacoz Beta Pegol F Ix , Glycopegylated Extendedhalflifenonacoz Beta Pegol F Ix , Glvcopegylated Exten‹Ledhalflife Factor Viii , Glycopegylated Extended Half Life Factor Viii , Teuotovir Alafenamidefumerate ( Taf ) 25 Mgtab / Cap , Entccaviri Mg Tab Leap Film Coated , Dacalatasvir 30 Mgtab. / Cap , Decalatesvir 60 Nigtab.Leap , Sofosbuvir 400Mg Tab / Cap , Ribavitiij200 Me Tab. / Capfilm Coated , Nonabsorbablepolypropylene Light Weight Macroporous Mesh 30*30 Cm , Three Dimensional Monofilament Polyester Composite Mesh With Collagenwath Glycerolanti Adhesivebarrier Visceral Side And Stay Suture In Parietal Side Aiong With Medial Medial Marking Size 15 Cm Circular , Three Dimensional Monofilament Polyester Composite Mesh With Collagenwath Glycerolanti Adhesivebarrier Visceral Side And Stay Suture In Parietal Side Aiong With Medial Medial Marking Size 12 Cm Circular , Three Dimensional Monofilament Polyester Composite Mesh With With Collagen With Glycerol Antiadhesive Barrier Visceral Side And Stay Suture In Parietal Side Along Vith Medial Medtal Marking Size 20*15 Cm , Absorbable 5 Mm Herrua Mesh Fixate On Device 30 Screw Shaped With Proximal Wines Of Pgla Tacks Of .4.1 Mm Length Along With Flexible Shall Tip To 3 Cm , Absorbable 5 Mm Herrua Mesh Fixate On Device 15 Screwshaped With Proximal Wines Of Pgla Tacks Of .4.1 Mm Length Along With Flexible Shall Tip To 3 Cm , Non Absorbable 5Mmhernia Mesh Fixation Deviee With 30 Helical Shaped Titanauin Tacks 3.96 Mm Width And 0.61 Mm , 5Mm Nonabsorbable Helicalfastener Made Up Of Medical Grade Stainless Steel Covered With Atraumat Ie Polymer ( Peek ) Cap To Avoid Metal Exposure With 15 Fasteners , 5Mm Norabsorhablehelical Listener Made Up Of Medical %Ade Stainless Steel Covered With Atraumatc Polymer ( Peek ) Cap To Avoid Metâl Exposure With 30 Fasteners , Light Weight Rnorofilamentpolypropyl E Ae Meshdesign To Confirm Inguinal Anatomy, 3D Shape Size Large Left 10.8*16Cm / 15*10Cm , Light Weight Monofilamentpo1yropyienemesh, Designto Confirminguinalanatomy, 3D Shape Size Large Righ 10.8*16Cm / 15*10 Cm , Light Weight Monofilamentpolypropylenemesh Design To Confnr Inguinalara*Omy3d Shape Size Extra Large Left 12.4Cm*17.3 / 16*12Cm , Li%T Weghi Jnonofilarnent Polypropylene Mesh, Design To Contirr Inyiilal Anatomy, 3D Shape Size Extra Large Right 12.4Cm*17.3 / 16*12Cm , Battery Operated 60Mm Articulatmgendo Cutter With A Disposable Battery Pack, For Enhancecl Di Stat U } A Stability Wdile Firing, Hay Rgclosed Channel In The Eartrdige Jaw For Better Stabil Qty During Firing, 360 Degree Rotation Shaft And One Handed Natural Automation Up To 4-5 Degrees, Precision Machined .Until Ti› Del Iver Initial, System Wide Compr Ess Ion, Wide Proxijr Alro Distal Jaw Aperture ( Proximal8mm Distnl 22Mm ) 3 Point Gap Control For Alignment Andcalibral + On Throughout The 60 Mm Stapl Eme, Knife Direction / Reverse Control To Dasconfinue The Fjring And Return The Kn Jfe, Interclaarpcable 6 Row Cartridge Optsons Of White, Blue , Gold, Green And B1ack, All Bits Down To 12Nun Trocar Sleeve, 440 Mm Shaft Length- 60 Mm Stnpler , Ljnear Cutter É Smirwith Sjx Rows, 3D Staple Fourateon, Option Ofegosed Stap1cheight Of I.3Jnm / 1Si13ji1 / 2Mmin One Cartridgc Only , Linear Either 75Mmwrite Six Roy>, 3D Staple Lfirmatioy Optioja Of Closed Staple Height O1 1 .5Mm / 1.8 Inns / 2Irm In One Cartridge Only , Universal Incur Cuter Carbndge 75Mm Open Linear Cutter Compafible With Selectable Staple Heinit 1 Inear Cutter 75Mm.Option Of Closed Stapl E Heignt Ofi.Jmm1 8Mm / 2Irrain One Cartridge Only6 Rows 3-D Staple Technology , Universal Linear Cutter Cartridge Simm For Open Iinear Cuttercompatiblemath Selectabie Staple Heigla R 1 I Near Cutter 35Mm. Option Of Closed Staple Height Of 1A Rirrj .8Mrm‘2Mrirone Cartridge Only6 Rons 3-D Stapl C Tcelanol Ogy , Curved Cutter Stapler 40Mm Linear Cuttur Simultaneous Cutting And Stapling , Curved Green Cartridge Havjrg Close Staple Hejght Of 2.0 Mm. Tactile Feedback On Completion Of Fring Scqiemce New Anvil Knife With Every Catridge , Powered Circular Staples 29 Mm With 3D Stap|E And Not Slip Grip , Poweredcircular Stapler 31 Mm With 3D Staple And Not Slip Grip , Circular Stapler 33Mm Cth Connolledtissue Compression With Adjustable Stapl E Laeigjnt ( 1.0-2 5 Mm Mm Controlledtissue Compressi On, Longer Staple Leg 5.5Min & Non St Ip Grip Surface , Laparoscopic Cartndge For Stapler60 Mm Blue, 1.5 Mm Closed Staple Height With Gripping Surface Tec!I Nology And Six Rows Compatible With All Range Otendosopic Linear Cutter 60Mm , Laparoscopic Cartridgefor Stapler With Allrange Of Endoseopj C Liaaear Cutter 60Mm , Pph Stapt Er 33Mm - Hemorrhoifial Stap ] Cr Kit Consjsts Of 33Mmheirorrhoidalcircular Stapt Er ( With+ !Ged Anvi ] Adjustab E Closed Staple Height From 0 75 Mm—1.5 Mm Stapte Open Leg Length Of 5 5 Mm ) . Suture Threader, Ci Cul Ar Ana1 Dilator. Purse-Stnng Sulure Anoscope, Suture Tor Purse String. , Optically Gujded Bladeless Trovar12rnm With Bilateral Tissue Separators, Opticaj Tip Lo Eliminate Blind Entry, Clear Ubbed Cannula To Enhance Abdominal Wall Retentiori. Recessed Siopcock Valve. Funnelshaped Housing, Duckbill Seeondary Seal, Inteerated Universal Seal That Eliminates The Use Of Reducer, L50mm Length. , Optically Guidedbladeless Trocar 12 Mm With Bhateraltjssue Separatoy Plieaitp To E } Im Nate B ] Ind Ejtrv, Clear Ribbed Canntila, Recessed Stupcockvalve, Funne { Shapcdhouslngduckbill Secondary Sep Integmtcd Univers Tj Sla ] That E ] Rp } #Atc3 The Use Of Refiucer 1Engtl100mm. , Faeial Clqsure Device Contain - Optical Bladcjess Trocar With Tact Al Closure Der Ice Co Raptible With Cleüi_Annula Have Two El Dc Opening Meant For Uniform Port Clostire , Varied Staple Height Reloads / Cartridges Herr 60 Mm Giairstruinenls With Tri-Staple Technology, Weth The Cutting Knije Blade Incorporatedin The Relouds Itselfwith Purple Vaned Staple Beigfit Of 3, 3.5 And 4Mmleg Lenen , Varied Staple Height Reloads / Cartridges For 80 Mm Gia Instrumentswith Tri-Stapte Technologywiththe Cutt U Knite Blade Lrieorpomled In The Reloads Itself, With Purplearied Staple Hcjght Of 3, 3.5 And 4Mjn Leg Leng£A , Linear Cutter With Varied Staple Height, Tn-S Taple Technology-Enabled Reloads Integrntionwig 1 En Anc| Right Firing Kncb ( Both Side Firings , Linear Cutter Stapler W Us Integratedgap Control Tecbnol Ogy Iz 60 Mm Tnstaple Gia Stapl Ci . Compatible With Tri- Staple Gia 60 Min Open Lmear Cutterreloads / Cartridges Purpule And Black , Eea Circular Stapler Purple Colourmediumthaci‹ , Triple Row› With Tristaple Technology ( Three Rov Of S To [ De Inner To Outer Row 3.0, 3.5 And 4 0 Mm With Sloped Cartridges Face In One Simpler ) Diameter 31Min , Linear Cutter With Varied Staple Hejght, Tri 8Taple Technology-Enabled Reloads Integrationwithleft Andright Firing Knob ( Bog Side Fireng ) , Iinear Cutter Stapler With Integratedcap Control Technology In 50 Nun Thstaple Gia Simpler. Compatible With Tri- Staple Gia 80 Mm Open Linear Cutterreloads / Cartridges Purptd E An Black , Wound Protector With Doubie Ring In Small 2 5-6 Cmusfda Approved , Wound Protector With Doublering In Medium 5-9 Cm , Woundprotecior With Double R Infin Larc E In Size 9-14 Cm Usfda Approved , Endo Batch Specimen Removalkit With Continuous Ring , Polyurethane Pouch Witli 34.5 Cm Shaft Lenth 10Mm With Leakproof Andimpervious Material To Cancer Cells Of 0.5 Microns / Pretied Purse Sbing On Pouch Usfdaapproved , Disposable Laparoscopic Clipapplier Preloaded Vzth 16 Clips, 5Mm Diameter With C Up Logictechno›1 Rug And Digital Display Titanium Clips- U Shaped , Laparoscopic H Oer Cutrerwithout Integratedfresh Knife With 360‘Rotatlon& 0-45* Articulatjonin Both Direction For Use With Cartridges In Sizes Of 30Mmcapable O1 Loading  I Length Camidges On Same Gun Onlv , Lnparoscopic Liner Cutterwithoutntegrated Fresh Krife With 360*Rotation & 0-45* Aiticulatio, Ain Both Direction For Use With Cartridges In Sizes Of 45Mmcapable Of Loading All Length Cartridges On Same Gun Only , Laparoscopic Liner Cunerwithout Integrated !?Esh Knife With 3Fi0*Rotation & 0-45* Artlculatiorin Laotla Drection . For Use With Cartridges In Sizes Of 60Rnm Capable Off Oading Ai1 Length Cartridges On Same Gun Ody , Hand Activated Cum Ed Taper Up Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device 9Cm Lengtla, 16Min Curved Active Blade With Adaptive Tissue Teclinol Ogy Cafable Of Sealmg B1ood Vessel Up To And Including 5Mm In Diameter, With Ergononic Symmeoiealburgerring Gyip- Focus 9 , Hand Acnvated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coaguiatiojadeviee, 17M Lengtla, 16Inmcurved Activebladevilla Adaptive Tissue Technology Capable Of Sealingbloofi Vesselsr+ Pto And Incl Nding 5Mm In Diameter. With Ergonornj C Symmetrical Finger Ring Gnp - Focus 17 , Advance Bipolar Hand Activatedprobe With 5Mm Shafi Diameter And 35 Cm Shaft I Engtla Vnth 5 Mm » Ide Stmaght Jaw Design With Seal Length Of 20Mm And Cul Length O1 ] 6Mo, Seai Ing Yesse1 Upto And Jncludjng 7R3m Through Ua3 J:Tj-Eqtjency Energy And Leaving A Temperature Controlled Mechanism Within The Jaw And Having Ar0culation Of 1.10 Degrees O Degrees On Both Sides ) And Capabl E Of 360 Degrees Rotauon , Advancebipolar Hand Zyctivatedprobe Wnh 5Mjn Shafi Diameter And 43 Cm Shaft Length With 5Rm ›I De Straight Jaw Design With Seatlength Of 20Min And Cut Lens Of 16Mm, Sealjngvessel Upto And Including 7Min Groughraw I O Frequency Energy Anb Having A Temperaturecontrolled Mechanism Within The Jaw And Having Articulation Of 1.1.0 Degree { *O Degrees On Both Sides ) And Capable Of 360 Degrees Rotation , Advance Bipolar Hand Activatedprobe For Open Surgery With 3Inm Shafi Diameter And 20Cm Shafi I Ciazth, 6Mmnude Straight Jaw Design Cth Jaw Length Of 38 Mmsealing Vessel Upto Andincl Nding 7Marthroughradio Frecuency Energy , Irving Separate Seal And Cut Buttons, Capable Of 360 Degyees Rotation , Laparoscopic Shears 5Mm Diameter.36Cm Long, 15 Mm Curved Coated B1ade And A E ] Amp Arm With Use Ue Pad, Capable Of Cutting, Sealing, Grasping And Coaeulating Blood Vessels Up To And Including 5Mmin Diameter. 360 Degrees Rotation, Ergonomic Handle Compatiblemath Ulu-Leonie Energy Source And Capable Of Hand And Foot Activate On , Advanced Bipolar Tissue Sealer 25 Cms, With 5Mm Shatt Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use Iropen Surg Ccl Procedures With Curved And Tapered Tip And Uses Aradvancedjgorithm For Intelligent And Efficient Energy Deñverydevice To Leave Intuitive Design With Separate Seal And Cut B C+Ti On And 360 Degree , Advancedbipolar Lssue Sealer 37 Cms, Math 5Minshaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut 1 Enill And 13.4 Mm Jaw Apernire Designed For Use In Laproscopi C Surgical Procedures Vith Curved And Taperedtip And Uses Sja A‹I Vanced D Goiiwmfor Intelligent Andefficient Energy Del J›Ery. Device To Have Intuioie Design ›Vjth Separate Seal Ajad Cut Bu1i‹›R And 360 Degree , Advanced Bipolar Tiss We Sealer 45 Cm With Sm Nshaft Diameter, 24 Mmjaw Length, 21.8 Mmcut Fen _I1and13.4 Mm Jaw Apemue Designed For Use In Laproscopio Surgi Catprocedureswith Curved And Tapered Tip And Uses An Advanced Algorithmfor Intepjgent Andefficient Ethers Delivery . Device To Have Intuitive Design With Separate Seal And Cut Pinion And 360 Degree Continuous Shaft Rotation , Laparoscopic Shears Drum Diemeter›36Cra Long, 18Mir Curved Coatedb1ade Und A E|Ainp Arm Y7th Tissue Pad, Capable Of Cuttmg, Seh Ing, Erasping And Coagulating Biood Vessels Up To And Incl Ufi Ing 7Mm In Diameter. 360 Degrees Rotaeoy Advance Hemostasis Handactivafionmode For Seatrig Vessels Upto 7Mm In Diameter , Ergo Ao Me Handle Co Opali L^ Ie With Ultrasonic Energy Source. Capable Of Hand And Foot Activatnorvith An Integratedhand Piece And Trnrsd Ucer , Connecling Cattle For Ultrasonic Harmonic Scalpelfor Openenergy Probes Compatible With Fucus Plus Shear- Hp Blue , Connectomgcable For Ultraronic Harmonic Scalpel For Lap Energy Probes Compatible With Ace Plus Shearhp054 , Laparoscop C Shears 5 Rmdiameter.45Crntory I 5Mm Curved Coated Bbade And A Clamp Arm With Tissue Pad, Capable Of Cutting Sealing Grasping And Eoagulatingblood Vessels Up To And Including 7Mm In Diameter 360 Degrees Rotation Advance Hemostasishand Activationmode For Scaling Vesselsupto 7Mm In Diameterergonomic Handle Compatble With Ultasonicenergy Source And Capable Of Handandfoot Activation , Nasalhaeirostatic Sponge Pack ( With Airway ) 10Inch , Platt›Np For Max Llary Swrig And Mandlb Mar Fixation Surgeries ( Titanium ) Plates - 2 Mm Thickness ( 22 ) Holedril1 Bit Machinc With Insertion Tools , Plaiting For Maxillaryswing And Manfiibt+Lar Fixate On Surgeries ( Titanium ) Plates - 2 Mm Thickness ( 1 *2 ) Holedrill Bit Machinc With Insertion Tools , Plaiting For Maxi Ilary Sving And Mandibular ?Ixatj On Stcgeries ( Titanium ) Plates - 2 Mm Thickness ( 1* 1 ) Holedrill Bit Machine With Insertion Tools , Plattinp° For Ar Axillary Suing And Mandibular Fix.Ation Surgeries ( Titanium ) Screw- ( 2 Mm ) Diameterdry11 Bit Maqbine W¡Th Insertiontools , Plattinp° For Ar Axillary Suing And Mandibular Fix.Ation Surgeries ( Titanium ) Screw- ( 1.5 Mm ) Diameterdry11 Bit Maqbine W¡Th Insertiontools , Pbatting For Maxillary S Vj Rig And Ir Aiadibular Fixatj Orj Surgenes ( Titanium ) Screw- ( 2.5 Mm ) Dian Eterair + Ii Bi1 Machine With , Plotting For Maxillary String And Mand Ibular Fixation Surgeries ( Ltariium ) Screw- ( 3 Mm ) Diameter Dr I11bit Machjne With Insertiontools , Speech Prosthesis For Laryngeetom } ( Indwelling Lowresistance Silicon Voice Prosthesis Wed Diamelerwith Varied Length Should Have Blueefion Valve Seet Lor Privacy And Secondaiy Iilsedion Alone With Inserting Toojs And ‹-Icaiirg Accessories ) 7Fr ( 4 Mm ) , Speech Prosthesis For Larynpectoary ( Indnel1ing Toe Resistance Silicon Voice Prosthesls Varied Djarnete R With Variefilength Should Have Blue Teflon Value Seet For Pri Ray And Secondary Irsertion Along With Inserting:Ools Andc Leuning Accessories ) I7fr ( 6 Mm ) , Speech Prosthesis For Laryngecto Ry ( I Ndwellinz 1Owresistance Silicon Voice Prosthesis Varied Diamc Ict With Vatied Length Shouldhave Blue Tell On Halve Seet For Pr Mary Anrl Secordary Insertion Along With Inserting Tools Andc Leuning Accessorj Es ) J 7Fr ( 8 Mm ) , Speech Prosthesis For Laryngectoiny ( Jpduelljng Lowresistance Suf Icon Voice Prosthesis Varied Diam Sterstb Vr Ed Length Shouldhave Blue Teflon Valve Seet For Pn Mary Anfi Secordary Insertion Al Ong With Inserting Tools And Steuning Accessories ) 17Fr ( 10 Mm ) , Speech Prosthesis For Laryngectomy ( Indwelling Owresistance Sii Con Voice Prosthesls Van Ed Diajretestb Wed Length Should Have Blue Teflon Valve Seet For Primary And Secondary Lrsertion Along With Inserting Tools And Cleuning Accessories ) 17Fr ( 12.5 Mm ) , Speech Prosthesis For Laiyngeotoiny ( Indwellmg Totrcsistance Silicon Voice Prosthesis ›Aricd Diameter With ›Ariedlength Should Have Blue Teflon Valve Seet Tor Priinary And Sccondary Insertior Along° With Inserting Tools Andc!Eaning Accessories ) 20Fr ( 4 Mm ) , Speech Prosthesis For Laryngectomy ( Andwelling Los Icsistance Silicon Voice Prosthesis ›Arjed Diarnete R Wrth Varied Length Should Have Blue Tetlon Valve Seet For Primary Anfi Secondnry Mserlon Al Ong With Inserting Tools Anfi C!Eaning Accessories ) 20Fr ( 6 Rum ) , Speech Frsthesis For Larynqectomy ( Indwelï Illg Losren1stance Sllicon Voïcg Pro6thesls Van Ed Diam 0 Tenwith Bedlength Shouldhave Blue Teflon Valve Seet For Primary Anfi Secondary Insert On Along Vnth Inserting Tools Anfi C Leuning Aecessories ) 20Fr ( 8 Mm ) , Speech Prosthesis For Laryngeclomy ( Indwelling Lowresistanee Silicon Voice Prosthesis Varied Diame Le: With Varied Length Should Have Blue Teflonvalve Seet For Primary And Secondary Insertion Alonsruth Jnserting Tools Andcl Caring Accessories ) 20Fr L0 Miv , Speech Prosthesis For Laryngectomy ( Indwelling Lowresistance Siliconvoice Prosthesis Varied Djarneter With Varied Iengt5 Should Have Blue Telon Valve Seet For Primary And Secondary Insertion Alone Cth Insernng Tools And Cleaning Accessories ) 20Fr ( 12.S M M ) , Speech Prosthesis For Laryrigectomytardwelling 1O Vresistance Sillcon Voice Prosthesls Izrieddiameter With Varied Lengm Slaouldhave Blue Tepon Valve Seet For Priinary And Secondary Insertion Aloups Ruth Inscrting Tools And Clcaning Accessorics ) 22.Sfr ( 6 Mm ) , Speech Prosfhesis For Laryngectomy ( Indweii Ing Lotresisiance Siljcon Voice Prosthesls Varied Diametct With Varjed Length Shouldhave Blue Tel On ›Alve Seet For Priinary And Seconday Insertion Along Math Insertù 6Tools And Cl Uaning Aecessories ) 22.Sfr ( 8 Nm ) , Speech Prosthesis For Laryngectomy ( Indeelling Howresistance Siltcon Voice Prosthesis Varred Djameter With Varied ] ;Qgt } J S£Oiild Have Blue Teflon Valve Seet For Pu Tiaryanad Secondary Insertionalong With Inserting Tools And C1 Eanîng Accessorjes ) 22.Sur ( 10 Mm ) , Speech Prosthesis For Laryngectomÿ ( Irdwellil7g Lowresistance Siiicon Voice Prosthesi9 Taried Diam Ever With Varied ] Ength Shotildhave Blue Tefion Valve Seet For Prîmarysud Secondaryinsertion Al Pu P Wit ] Jnsertjng Top ] $ Ajjd ] Est Jjjg Accessories ) 22 Sfr ( 12.5 Mm ) , Spàech Prosthesis For Laiyngeclomj ( Indwell Ing Lowresistance Sj Picon Voice Prosthess Varied Diat Eler With Varied Lergth Sloutd Kave Blue Teflon Valve Seet Foi Pnmary And Secondary Msertiriralong Withinsening Tools And Clesning Accessories ) 22.Sfr ( 4 Mm ) , Blockused In Divropjasty ( Sialestic And Aortes ) 70*5F ) Mjr With 20 Mm Thickress , Disposable Needle 16G X Iinch , Cuivedtip Œ Stepped Cartridges Face |°Roin Inner To Outer Side 2.0.2 5 And 3.0 Mm Staple Heights Roy.For Variable Thickness Tissue Application Fixed Anvh , Differentleg Length Staples In Sam E Cartridge , Inbuilt Kjjife , Size 45R ›Tan Colour Code For Vascular Appcations , Curvefi Tip & Stepped Caitridges Face From Inner To Outer Side 3.0, 3.5 And 4.0 Mm Slaple Heights Ron For Variable Thiekness Tissue Appllcatj On › Fred Anvll , Different Leg Length Staples In Salue Cartridge , Inbuilt Kuifc , Size 45Rrpurpule Coiour Code For Medaum To The Ck Tissue , Varied Stapl E Hei%T Reloads / Cœtridges Lör 60 Min Gja Instrumentsruth Tu-Staple Techrology, Will Tlac Cutting Knafe Blade Incorporatedin The Rcioads Itself, With Black Varied Staple Height Of 4, 4.5 And 5Mmleg Length , Disposabje Laparoscopic Chip Ayp1ier Preloaded With 16 El*Pu, 5Inm Diajneter Wilh Chip Logictechno T Oey And Digital Display Fitanium Clips- U Shaped , Synthetic Oxidised Re-Generated Cellulose Double Lavered With Peg And Trîlysine Size 2*4Cm , Synthetic Oxidised Re-Generated Cellulose Doubt Eayered Wilh Pfg And Triljsine Size 5* 10Cm , D Sjaosab Ie 10 Mm Lr Doscopic Clip Applier Wltlafacility Of Loading Clips Independent Of The Firing Mechanism. , Disposable 10 Mm Endoscopic Clip Applier With Facility Of I Oading, Clips Independent Ot The Tiring Mechanism Large Size , Endo Liner Cutternuthout Integratedfresh Knife Math 360*Rotation & 0-45* Articnationin Both Djrec1i‹A+Afor Use With Cartridees In Sizes Of 30Inm Capable Of Ioading All Length Cartridges On Same Gun Only , Endo Liner Cnnerwithout Integatefifresh Kni Fe With 360*Rotation & 0-45* Articulationin Both Direct Ionfor Use Cth Cartridges In Sizes Of45mm Capable Of Ioadine All Length Cartridges On Sabre Gun Only , Endn Liner Cutterwitllo Ut Integrated Fresh Km Be Math 360*Rota0on & 0-45* Articulationjrboth Direci I‹Ra For Use With Cartrj Dges In Sizes Of 60Mm, Capabj E Of Loadin° All Length Cartndges On Same Gon Only , Disposabj E Clip Appl Ier Preioaded With 20 Cf Ipssupernterlock Security With Clip Designtechjaologymedium , Disposad Ie Clip Appd Ier Prcloaded Rjth 20 Cl Jps, En Periisierlock Securjtx With Clip Desk Untecfinolorsmal , Sterile H Poderm Ie Syringe Wrth Needle Attached 22G. Single Use -2 Ml , Sterile Hypodcrmic Svr+ A Ce With Needle Attaehed. 22G. Single Use -5 M1 , Biolomcal Glue With Ihroinbm& Aprot N C1 Ml , Biolomcal Glue With Thrombin & Aprotinin 2Mi , Closewound Drainage Device Under Neative Pressure ( Closed Wound Suction Unit ) Size 8 No , Closewound Drainage Device Under Neative Pressure ( Closed Wound Suction Unit ) Size 10 No , Closewound Drainage Device Under Neative Pressure ( Closed Wound Suction Unit ) Size 14 No , Closewound Drainage Device Under Neative Pressure ( Closed Wound Suction Unit ) Size 12 No , Sterile Oxidized Regeneratedcellulose Hemostatjng A°Entin Neiform Fibrillar Andin Thick Sheath As Perip , Urine Collective Bag, Disposable 2000 Ml With Urollow Meter , Central Neck Line- Double Lumen ( 3 Nobe1 Metal Coated ( Gold, Silver, Pa11adiurn ) Central Lumen Catheterb Oubl E Lumen ) , Microcatheterselectlye Infusionmicrocathetcrs For Intra Cmnia Aneurysmtreatmentwith 2 Tipmarkers , Microcatheter Selective In Fusion Microcatheters For Deployingintracranial Device. Stent Deployment , M Crocatheicrselective Infusionmicrocaiheters For Flow Diverter Delivery With Single Tip Markers 0.027 Inch , Microcatheter Flow Dependent Super-Set Eetive High Flow Infusion Mierocatheters For Cerebral / Spiralavms ( Compat Bie With Dmso ) , Micro Guide Wirefor Mierocntheiershapabj E Distal End Aridvvlh Torque 0 014Inch , Bare Platinumcoil Complex Shape. Sotf, Electrolvie Detachable Frarn Jnq And Filling Size 1 To 25Mm , Bare Platmurn Coil Complex Shapesotl Mechanically Detachable Framjnq And Fi1line Size 1 To 25Mm , Bare Platinum Coil He ] Ical Shape. Sofg Electrolvt4 C Detachable Size 1 To 25Mm , Bare Platinum Coil Helical Shape. Sob Mechanicallydetachable Size 1 To 25Mm , Aortic Punch 2.5 I Eugth Berwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cm Edge For Cream Precise Removal Of A‹En C Tissue Conicaltip Or Round / Eiiptjcal Tip For Easy Insertat Orby Straight Or Button Hole Tech, Shoulfi Have Long And Short La° Ridge Confirguaratior, Sterile Packing Size 2.5 , Aortic Punch 3Length Betnwen 6 To 7 Mídlength Diamondedge Sharp, Dual Ent Edge For Clean Precise Removaj Of Aorta C Tissue, Corical Tip Or Round / Eljplcal Tip For Easy Inseihtionby Sbai%T Or Button Hole Tech, Sbould Have Long And Short Laudle Confirguanuon, Sterilc Packtng , Aortic Punch3.5 Lenyth Betwwen 6 To 7 Midjength Diamojid Edee Sharp, Dual Cut Edge For Clean Precisc Removal Of Aortic Tissue Conical Tip Or Round / Elipticajtip For Easy Msertationby Straight Or B Utton Hole Tech, Should Have Long And Short Tia+ Idle Confirguaratiol . Slerile Packing Size 3.5 , Aortic Punch4 I.Ength Betwwen 6 To 7 Midlengthdiamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of A Tarnc Tissue, Conical Tip Or Round / Ehptical Tip For Easy Irsertationby Straight Or Button Cole Tech, Should Have Long And Shorthandle Confirguaraton, Sterile Packing Size 4 , Aortic Punch 4.5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aor I Ie Tj Ssue, Conical Tip Or Round / Eliptical Lp For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Late Idle Confirguanuor, Sterile Packing Size 4.5 , Aortic Punch 5 Lengthbetween 6 To 7Midlength Diamond Edge Sharp, Dual Cm Edge For Clean Precise Removal Of Aortic Tissue, Come Tip Or Round / Emptiest Tip For Easyq Insertation By Straight Or Button Hole Tech, Should Have Long Arnd Short Handle Corfirguaration, Size 5 , Aortic Punch 5.5 Length Betvnen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aoruc Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insermtion By Smught Mr Button Hole Tech. Should Have Long And Short Handle Confirguaratj On, Size 5.5 , Aortic Punch 3.6 Lengthbetwven 6 To 7 Midlength Diamondedge Sharp, Dual Cut Edge For Clean Precise Removal Of Ao Rite Tissue, Conical Tip Or Round / Eiipiical Tip For Easy Insertationby Straight Or Button Role Tech, Should Have Long And Short H‹ Ndle Conf-Ir5uamtion, Sterile Packing Size 3.6 , Folleys Catheter Fixation Divicc Foley Catheter Holder Universal Size Shouldhave Leg Band And Is Disposable Single Patiemnt Use Dev Ice S Mould Have Catheter Grip Of 18 To 24 Mr Catheter And Made Of Crobelt Or Any Other , Tur Set Tur Irrigation Set Disposable Urology Instmmenturology Equipmeni Endosurgery, Mfg Fromclínica Grade Non Toxic Medical Trasparent Pvc Sheet, Y Sbaped Connector Vntb Poirnted Spike To Easy Erce Fiacilities A { Te1 Ual Ive Change Solution Thumboperated Clamp Smooth Change Of Bottle Proximal End Fitted With Flexible Latest Tubing For Easy Connection To Endoscope Eto Steril Individual Pack Should Have Minium Langht Of 260 Cm Or More , Laproscopic Port With Trocar 5Mm Optimally Guided Bladclcss Irocar Drume Ithbilateraltissue Separators, Optical Tip To Eliminateb I + I Ic4 Entry, Clear Ribbed Cannula To Enhance Abdominalwall Retention, Recessed Siopcock Valve, Funnel Shaped Housing. Duclcb I! I Secondary Seal, Inteerated Universal Seal That Clim Mates The Use Of Reducer, L50mm Length. , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Shouthave 20Mm Sample Notchand Thin Wall Cannula For Larger Core And Echogenic Making On Both So Let Tip And Carinul A For Improved Visibility During Procedure. Should Ha› E Three Programmablefiring Mode-Automate Rn‹›Dcdelay Mode And Zero Throw Mode. Should Have 1Vo Firing Bttor On Surface Of Thesize12g, 14G, 16G, 18G, 20G With Length 11Cm 15Cm, 20Cm. Shoud Come With Comp Tib Ie Coaxial Packed With Biopsygunusfda Approved , Patient Pre Operative Skin Preprationsolution 26 Ml In One Stop Sterile Applicator Container For Single Use V Ith 2% Chiorohexdine Gluconate ( Chg ) And 70% Ipa With Orange Tint Colour Or Easy Via Ulization, Us Fdaapproved , Rem And Non-Remsingle Use, Corded Patient Return Electrodesconductive Adhesive Hydroge With Usfda , Chiorlaexidjne Impre°Nated Paraffin Gauze 30X10cm , Chiorlaexidjne Impregnated Paraffin Gauze 15X1 Roll , Surgical Crloves 6.5 Non Latex Surgical °Io›Es Synthetic Polyisoprene Povder Free Overall Length 283Mm With Puncture Indicator Technologyusfda Approved , Surgical Gloves 7 Non Later Surge Cal Gio›Es Synthetic Polyisoprene Powder Free Overalllenglh 283 Mm Withpnurture Indicator Technologyusfda Approved , Surgical Gloves 7.5 Non Later Surp°Ical Gloves Synthetic Polyisoprenepowder Free Overall Leneth 283 Rum With Puncture Indicator Technologyusfda Approved , Ionic Silver Dressings With Broad Spectrumantimicrobial. Bactericldal, Biofilm Destruction& Reloc Ii Ion Efficacies Recommended For Low To High Exudingvounds5 Cms X 5 Cms , Ionic Silver Dressingswith Broad Spectrumantiinicroblal, Bactericidaf, Biofilrndesbuction & Reform Na:Ion Efficacies Recommended For Low To I-Iagh Exudingwounds10 Cms X 10 Cms , Self Adherentmoist Wounhdress N°Made Up Of Triple Hydroeojl Oid Matryelastornerjc Polymer F O R 1°Ressure Ulcers / Bed Size 10 Cms*10Cms , Sfch Bondedhydroftberburns Oressslngs With 1.2%• Impregnatedtoclc Silver With Sustained And Oi4 Tlelnand Broad Spectrum Antimicroblal & Bactricidal Activity With Highexudate Management Capability With A Wear T Ime Of 21 Days & Locking In Edudates In Gel Form 23 X 100 Cms , Double Wallresuscitator With Pefip Valve In Adult It Should Be Fuhy Autoclavabledouble Wall With Hand Strap It Shout Dbe Supplied Cth Autoclavable Reservoirbag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult Bag Volumemark Iv ( 1300 Ml ) Eightadult ( 415 G ) It Should Be Us-Fdace & Iso Cerified , Double Wall Resuscitator Mtbpelp Valve In Paediatrics It Shoulfi Be Fully Autoclavable Double Well With Hand Strap It Should T›E Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of S+1Icone Rubber It Should Have Easy Attachment Of Peop Valve Forpeadiatric It Should Hsve Provision To Attach Rnanoineteitor Paedlatricsambr Bag Bag Volume:Mark Iv Baby ( 300 Ml ) Weightbaby ( 190 G ) It Shouldbe Us-Fda, Cfi & Iso Certified , Sin%E Patientuse Sebshesuscitator ( S Pur Ii Cth Peep Valve In Adult } • It Should Be S1n%E Use Resuscltator Made To Sebs Material Not Pvc • } T Should Laai C Unique Singh.$ ] Uitter Va [ / E System For Rellabie Functional Iy& Swivgl Tietween Vat¥E And Mask Permits 360° • Ït Shoutühave Thin-Naïleó Compresstonbag Y‘Ith Adstrip. • Resusc Tarot Volume. Adult ( 1475 Mï ) • ( Including Reservou And Rnask ) • It Should Be Ce / Iso, Us Fda Certitied. , Single Patient Use 8 Ess Resuscitator ( S Pur 11 With Peep Valve Inpaed ) • It Should Be S N%E Use Resuscitator Made To Sebsmaterial Not Pvc • It Should Hase Unique Single-Shutter Value System For Reliable Lfictionality & Smvelbetween Valve And Maskpermits 360° Positjoning In Relation To Thepatient • It Shoulfi Have Thin-Wall Efi Compression Bag Vith Send Sap.It Should Ba›E Provision To Attach Manorn Elcr F0r Paedialries • Rssuscitatorvolume Pediatric ( 635 Ml ) • ( Inc1uüing Rc.Seaoir And Inask ) • It Shouldbe Úe / Tso, Üs Lda Con Ted. , Fi Jrgle Patientuse Sebs Resuscitator ( S Pur 11 With Peey Valve In Neo Fatal ) • { T Shou } D Be Sjng } E Up Tesuseitetormade To Sebs Material Not Pvc • It Should Nave Uni Que Single-Shutter Val›E System For Reliable Functionality & Sv4veibetweenvalve ‹Ijjumaskperm Its 360° Positioning In Relation To Bepaoent • It Sho Uid Leave Thin-Was Led Compressionbag Cvi Tb Handstrip • Resuscitator Volumeneonate ( 220M1 ) • ( Including Reservo R Andmasjc ) • It Should Fe Ce / 1S O, Us Fda Certified , Pre-Formedsga With Gastric Access & Inuibation It Shout D Be Latex Free Preform Ed Laprgcai Mask Having Gastric Access Charmedand Should Be Usedas Cconduitfor B Irect Endosacheaiintu Bath On With Any Bardetj • It Shouldbuilt-In, Anato Ricahy Cprrect Curve And Cuff & Tube Mouldedas A Singje Unit. • U Itra-Thin Pilot Balloonwithtactile Indication Of Degree Of Inflation. • Universali5mm Connector ( Iso ) . • It Shout D Be Cl / Is 0 Us Fda Certified , Pre-Forme‹J Sga With Gastric Access & Intubation It Should Be Latex Free Preformefilaryneealmask Having Eastric Access Channeland Should Beused As A C Onduit For D Jrect Endotraclaeal Intubafion With Any Brand Ett • It Shouldbujlt-In, Anatornically Correct Curve And Cuff & Tube Moulded As A Slrgl E Unit. • Ukm-Thin Pilot Balloonwith Tactile Indication Of Degree Of Inflation. • Unnersall5mrnconnector ( Iso ) . • It Should Be Cfi / Is 0, Us Fda Certified , Pre-Formedsga Cth Gastric Access & Intubation Ft Shoulfi Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Dircc4 Endotraehehintubation With Any Brand Ett • It Shouldbuilt-In, Anatomically Correct Cur E And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Bd 1Ooh With Tactile Indication Of Degree Of Irritation • Universall5mrnconnector ( Is0 ) . • It Shoed Be Cfi / Fs 0, Us Fda Certified , Pre-Formed Sga Mtbgas+Ri C Access & Intubation It Shouldbe Latex Free Preformedla Gearmaslc Havjng Gastric Access Channel And Shpuld Be Usednconduit For Direct EndoRachealmtubati On With Any Brand Ett • Ii Should But ] T-In, Anatomicall5correct Curve And Cult & Tube Inoulfled As A Single Unit. • Ultra-Thinpilot Balloon With Tactile Inb I Catlon Of Degree Of In Station • Universal ] Hmmconnector ( Iso ) . • It Shout D Be Ce / Iso, U8 Fda Terrified , Pre-Tormed Sga Moth Gastric Access & Intubation It Shoril D Be Latex Free Preformed Laryngealmask Having Gastric Access Channel And Should Be Red As U C Onduit For Direct Endotrachealmtubation With Any Brand Ett • It Should Built-In, Anatomicaljy Correct Ewe And Cuff & Tube Mouldedc A Sangl E Unit • L!Loa-Min Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector ( Iso ) . • It Should Be Ce / Iso. Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngealmask Havmg Gastnc Access Channel And Shouldbe Used As A Conduit For Direct Endotrachcalintubation Cth Any Brand Ent • It Shouldbuilt-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thinpilot Bai?Oonwith Tactile Indication Oy Degree Of Relation. • Universal 1 5Mm Connector ( 150 ) • It Should Be Ce / Is 0, Ls Fda Certified , Pre-Formed Sga Witlgastric Access & Intubation It Shoul D Be Latex Ftee Prefontedlaryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endoiiaehealirtubabon Wide Any Brand Etc • It Should Bijilt-Iy Anatonncally Correct Curve And Cell & Tube Molded As A Single Unit • Ultra-Doin Pilot Balloonmath Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector ( 180 ) . • It Should Be Ce / Iso, Usfda Certified , Pre-Formed 8 Ga Vzth Gas Ticaccess & Intubation It Should Be Latex Free Preformefi Laryngealmask Having Gastric Access Shame ) And Shouldbe Used As A Conduit For Direct Eodotraclzcal Ntubation With Any Lmndett • It Should Built-In, Anatomlcally Correct Curve And Cuff & *Ube Moulded As A Sjng ] E Unit • Ultra-Thinph Ot Balloonwith Tactile Indicationdegree Of.Njlatj Jj. • Universal 15Mm Connector ( Is0 ) . • It Should Be Ce / Iso, Us Fda Certified , Si Licone F’Re-1Érmed Sga • It Sho Add Be And Autoc|Avab1eup To 40 Times • It Shouldhave Rein Forced Lp At Cur And Cuff & Tube Mouldedas A Single Unit. • Atrauinatj C Insertionaaad Removal • It Should Be Ce / Is 0, U8 Fda Certified , Silicone Pre-Formed Sg A • It Should Be And Autoclavable Up To 40 Times • It Shook D Have Reinforced Lp At Cuff And Cj& Tube Moulded As A Single Unit. • .Atrauiratac Insertion And Removal • It Should Be Ce / Iso U8fda Certified , Siliconepre-Formed Sga Total Size 8 • It Shouldbe And Autoclavubleup To 40 Times • It Showild Have Reinfpreed Tip At Cuff And Cuff & Tube Moujded As A Single Unit. • Atrauiratic Insertion And Removal. • It Shouldbe Ce / Iso, Us Fda Cerbficd , Si ] A Cone Pre-Toured Sga • It Shouj Fibe And Autoclavableup To 40 Limes • It Shoot D Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atrauinatic Insertion And Removal. • It Should Be Ce / Iso, U$ Fda Certified , Silk Cone Pre-Formed 8La • It Should Be And Autocl Avab|E Up To 40 Titres • It Shoal Fi Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Siiaele Ur It. • It Shout D Be Ce / Is 0, U8fdacertified , S Licore Pre—Formed Sga • It Should Be And Autoclavableup To 40 Tjjnes • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Si Nejetin It. • It Should Be Ce / Iso, Us Tda Certified , Siiicone Pre-Formed Sga • It Should Be Andautoclavableup To 40 Times • It Should Have Reinforced Tip At Cult And Cuff & Tube M Ouldecl As A Single Unit • Atraumatic Inserhon And Removal • It Shoulfi Be ?? / Iso, Us Fda Eertified , Si Licone Pre-Formed Sga • It Slou1d Be And Aotoclavableup To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Mo? Dcd As ? Single Unit • Atraumatic Insertionand Removal. • It Shouldbe Ce / Is O, Us Fda Eertified , Ccrvieal Colkir With 12 Sizes Settirgs • It Shouldbe Latez Free A6justable Cojlar With J 2 Size Settinp° In Paediatric Coljar • It Should Have Standard Sizinp° Line For Easy And Aecurate Sizii4g • It Should Be ? E / Iso, Us Fd.A Certifieb , Cervical Cojlar With 16 Sizes Settinp°S • Ll Shouldbe Latex Free Adjusiable Collar With 16 Size Scttjng In Adult Collar • It Should Have Standard Sizlng 11Ne For Easj And Accurate Sizing • It Shoud Be ?? / Iso, Us Fda Cernlied , D Uset Connector Cardlo Secror Electrodes • 1T Should Haye Hiscorductive Wet Gel To Ersure Rellable Traces. • It Shouldbe Desigd With Offset Connector To Prevent Artefactsborn D Srupting The Readouts • It Should Have High Quality Ac / Agc1 Sensor To Ensure Exceheiattrace Qualip • It Should Have Size Not More Than 72 ? 68 Rnrn , Oifset Connector Cardio Sensor Filectrodes • It Shoul D Ha›E High Oonductjve Wet Geito Ensure ??? Iable Traces. • I T Shouldbe Deslgn With Offset Connector To Prevent Artefacts From Disrupting The Reafi Outs • It Shouldhave High Quality Ag / Agclscnsor To Ensure Excel Lent Trace Quality • It Shotddhave Size Not More Thsr 72 ? 68 Mm , Ol£Set Corinector Cardio Sensor Ejeetrodes • It Should Have High Conductav ? Wet Gel To Erisurc Reliable Traces. • It Should Be Design With Offset Corniector To Prevent Artefactsfrom Disruphng The Readouls • It Shouldhave High Quality Ag / Agc1 Sensor To Ensure Excellent Trace 9Ud It • It Should 1+Ave Size Not More Than 72 X 68 Mm , Anatomieal£Ace Maslc With Thumb ???? Silicone •Thumb Rest For ? Tip°Ht, Easy Seaj, Made Up Of Silicone , Moinlcal Face Mask With Thumb Rest Silicone •1Humb Rest For A Tight, Easy Seal, Made Up Of Silicone • Can Be Autoclai Ed Repeatedly At 134°C , Anatomical Face Mask W4ththumb Rest Siiieone •Thumb Rest For A Tighl Easy Seal, Made Up Of Sillcone • Can Be Auioclaved Repeatedly At 134°C , Anatomical Face Maskwith Thumb Rest Silicone •Thumb Rest For A Tight.. Easy Seal, .Made Up Of Si1 Cone • Can Be Autoclavedrepeatedly At 1 34°C , Anatomical Face Mask With Thumb Rest Silicone •Thumb Rest For A Tjgllt, Easy Seal, Made Up Ot Silicone • Can Be Automated Repeatedly At 134°C Size-4 , Aaiatomica I £Ace Mask With Thumb Rest 8I1icone •Thumb Rest For A Tight, Easy Seat, Made Up Of Sillcone • Can Be Autoclaved Repeatedly At 134°C Size -5 , Anatomical Face Mask With Tb Timb Rest Sixcone •Thunib Rest For A Tight, Easy Seal, Made Up Of Si1icone • Can Be Autoctayed Repeatedly At 134°Csize-6 , Disposablesga Anatomical Curve • Itslaould Have Special Curve Mtcarefiillyreplicates Naturalhuman Apntomy • It Mouldeddirectlyinto The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomicallj Gnp During Insertion Size-1 , D Sposabje Sga Latolrical Curve • It Shout D Nave Special Curve That Carefully Replicates Natural Human Anatomy • It Mouldeddirectly Into The Tube • Should Have A D-Shaped Airway Tube To Giyc A Firm And Ergonomically Grip During Insertion Size-1.5 , Dr Z9osay Ie 8 Ea Anatomicalcurve • It Should Have Special Curve That Carefully Replicates Natural La Uman Anatomy • It Mouldeddirectly Into The Tube • Snou1d Have A D-S ] Aped Aimay Mbe To Give A Fine And Ergonomical Iy Grip During° Insertion Size-2 , Disposable Sga Anato Rich Curve • It Should Have Specialcurve That Carefully Replicates Naniral Human Anatomy • It Mouldedh Ireedy Inro The Lube • Should Have A D-Shaped Airway Tube To Give A £Nnand Ergonornical ] Y Grip During Insertion Size-2.5 , Disposable Sga Anatojmcml Curve • It Shout D Have Special Curve That Carefully Rep1a Cates Natural Humananatomy • It Uoulhed Hiyeeti ) • Info Be Tube • Shouldhave A D-Shaped Airway Tube To Gave A Firm And Ergonomically9rip Duringriserl On Size-3 , Disposabie Sga Anatomicalcurve • It Should Have Special Curve That Carcfr4 Ly Replicates Natuml Human Anatomy • It Moulded Directly Into The Tube • Shouldhave A D-Shaped Airway Tube To Give A Finn And Ergonojr I Cally Tip During Insertion Size-4 , Disposabie Sga Anatomical Curve • It Should Have Special Curve That Carefully Reps Icates Natural Human Aj Atojny • It Mouldeddirectly Into Tictube • Shouldhave A D-Shaped Air Vay Tube To Give A Firmanfi Ereonornically Grip Dmng Insertion Size-5 , Disposabl E Sga Anatomicalcurve • It Shout D Have Special Curve That Carefully Replicates Nalurajhuman Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Byway Tube To Give A Fms And Ergonomicallygvip Durmg Inseuion Size-6 , Rhinolaryngo Single Patient Use Slim Scope Insertion Tube Diameter 3 .0Mm Werlcing Length300 Mm Bending Range130 Degree Up & 130 Õeyee Down Field Of View85 Degree Or More Ljirection Of View 0 Degree ( Forward X Jew ) Deplh Of Fiieló : 6—50 Mm O? Better Complete Systemshouldbe U S•Fda And European Ce Certified , Rt??Ojaryngo Sing4e Patient Use Lnvtervenhonscope Channelwjdtja: 2 2Rnan Ihsertj Optube Dá Ameter0 Mm. Working Lengl : 350 Rn M Bending Range 130 Degree Up & 130 Degree Down Field Of View. 85 Dence Or More Drecuon Of View. 0 Degree ( Forward I Îe ) Dept Of Field. 6-50 Mm Or Better Complete Systemshould Be Us-Fda And European Ce Certified , Ultrasorbsap Disposabledrypalis, Guy Pad For Moisture Management, 58 4X90cm, With Breathabl E Layer, Soper Absorbent Core, Aqua Sh C!Úfilm And Qtr Pccreable Back Sheet Absorbency Of 1800-2300Gm, Us Ida / C Eibis Compliant, Iso13485 Compjiant Size-58.4-90Cm , Elstic Head Strap Cannulaspediiatric Et Astic Head Strap Cannulaspediatr+C Must Be Soff Siliconised, Transparent Vjny1; Adjustrii›Lc Elaslic Band For Comfortable, Snug Fit Below The Ears; Complete Lcit With 7-Ft Oxygen Supply Tubingmanuiaclurer Mus1 Ice Us-Fda Registered & Certified Cth En / Eu Is01 348A & Applicable Ûok & Ce Certification. , Over-The-Earnasal Cannula Over-The-Ear Nasalcannula With Star Lumen, So Tubing, Must Be Flexible Contoured Lip Tab Prov Ides U High Level Of Stabi Hty And Patient Comfort. Over-The-Ear Design For A Comfortable And Secure Fit, Brush- And Kink-Res I Slant Tubing. Manalacmrermust Be Us-Ida Registered & Certified With En / Eu Iso 13485 & Applicable 510K & Cicertification , Pediatric Nasal Cannula Pediatric Nasalcannula Softech Wjth Universal Oxygen Connector. 7 Star-Lumentubing Lightweipla 1Flexible Nasal Cannuja Cthstandard Over-Thg-Eardesignedthat Optimizes Fit And Stabil Iiy, Sofi Nasal Prongs Help Max Inize Patient Comfort Individually Packaged For Convenience And Slerility Manufacturermust Be Us-Fda Regîslered & Cert Ji Red With En / Eu Iso 13485 & Applicable 5I Ok & Ce Certi Fication , Infantnasal Cannula Infant Pasal Cannula Softech With Universal Oxypen Connector, 7 S ?Ar-I.U1men Tubing Lightweight.Lie Sible Nasal Cannula With Standard Over-The-Ear Desk Gned That Optimizes Fit And Stability, Soil Nasal Prongs To Help Maximixepatient Comfort. Fijdtydtj@ Y Packaged For Convenienceand Sterililymanufacturer Must Be Us-Fda Registered & Øerl It Redwith En / Eh Iso 13485 & Appsicable 510K & Ce Certification. , Volum Ctric Incentive Spirometer ( Adult ) Volume • C Lneentive 8Piroinete ( Adult ) 4000 Ml With Handle. Olture Measurementm Pt Be Compact Eomfortable Designed To Accommodate Large Inspired Volumesmust Have Good-Better-Best Flow Window &Advujaced, Low Work-Of- Btmthlhqdss1. Particul Ate Flltofsof0o13indevice Houswmust H#Ip To Reduce $K Ofmore } G¡¡ M#Ptpjp9$$Tpg Tpa@E¡D¡S Expandable And Collapsible Tube Must Help Patients Tind Comfortableposition For Treatmentsano Canberemoved Whenstoring The Device. Ergonomicsfivejed Mouthpiece Ahows To Patients Createtight Seatto Enable Not E Accurate Meascteii Ent Flow Mdica*Orwith Smiley Face Provides Visualtarget For Desiredinhalation And Bright Green T4 Ow Ind Icator Make It Easy For Path Ents To See Results. Manufacturer M Ust Be Us-Ida Registered& Certified Cth Fin / Iiu Is01 348A H Appsicabje 5Ion & Ce Certification. , Volumetric Incentive Spirometer ( Pediatric ) Volumetric Incentive Spirometer ( Pediatric ) 25 00 .Ml With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspi Red Volumes.Nlust Have God-Better-Belt How Windy& Adjjjed, Low Z Zk- ( - Breatfmng Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risl Of Foreign Matterpassing To Patients Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments Andcan Lie Removedwhen Storing The Deviceergonomic Swivelecl Mouthpiece Ai ] Ows To Patients Create Tight Seal To Crabie More A‹ Curate Measurement Flow Indicator With Smiley Face Provides Visual Target For Desiredinha Nation And Bright Green How Indicatedjjj@E ¡T Easy { Or Patients Togsee Results. Manjacturer Must Be Us-Fda Registered& Certified With En / Eu Iso 1 3485 & Applicable 310K & , Insplratoryexcrciser With 3 Color-Codedballs, 3 Chambers I Nspiratory Exerciser Auth 3 Color-Codedballs, 3 Chambers & Wide Flow Rate Range From 01 Lf To 1200 Cc / See, With Minimumti Ow Imprinted On Each C1iatr.Her. Most Be Compact Design And Made Of Break-Resistant Plasticmanufacturermust Be Ij S-Ida Registered & Certified Wit.H En / Fiu Iso 134Sf & Applicable 5Iok & Ce Certification. , Adult Mask For Traeheosiorny .Adult Mask For Tracheostomy An.Filaryngeetomy Aerosol Therapy Tubing Connector Must Swivels 360° T‹I R Ease Of Positioning 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing Anfi Nebulizer Teas. Manufacturer Trustbe Us-Fda Registered& Certified Witlen / Eu Iso 13485 & Applicable 510A& Ce Certification , Paediaticmask For Tracheostomy And I Aryngectomy Aerosol Therapyfu Bjng Connector Must Swivels 3Ét!For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacture N Inst Be Us-Fda Registered& Certlfiod With En / Eu 15013483 & Applicable O I 0K & Ce Certification , Elongared .Aerosol Mask Adult Eongated Aerosolmask Adult V4th Under-The-Chin Design For Except Cut Fit On Wide Ran•E Of Face Sizes Ialust Be Clear, Soft Vinyl For Patient Comfort, Ad } Usiabl C Nose Clip Assures Comfortable Fit: Specifically Designedfor Aeros‹›1+ Herapy; Must Be With Suppliedwith 6 Ft. Corr A Flex Corrugatedtubing. Featuring Cuttable Sections Every 6 Intvlan Ul Ccl Urer Must Be Us- Pda Registered& Certified With En / Euis01348a & Applicable Ñok & Ce Ceni Fication. , Elongatedaeroso I Mask Pediatric Elongatedaerosolmask Pediatric Withunder-The-Chin Design For Excellent Fit On Wide Range Of Face +Zes Must Be Clear, Sofi V Iriylfor Patient Comfort, .Adjmtabie Nose Ct Ip Assures Comfortable Fit; Specifical!Y Designed For Aen Isol Therapy; Must Be With Suppl Red With 6 Ftcorr A Flex Corrugated Tubing, Featuring Ciittal Le Sections Every 6 In. Manutaci Urer Must Be Us- P Da Registered & Certified With En / Eu Iso 13Ds5 6C Applj Cable S0 K & Ce Certification , Elongatedthree-In-Oneadult Mask Elongated Three-In-One Ad Not Mask Must Be Able To Use As A Medium-Concentration, High-Concentration ›R Nonrebreathiri° Maslr Uhjch Includes Mask With Flapped Valve, Nonrebreathing Bag Assembly: Adjustable Nose Ct Ip Ass Es Comfortable Fit, Auth 7 Fi. Star Lumen Oxygen Supply Tubing, 750 Rn L Reservoir Bagmanufacturer Must Be U8-Fda :E‹;Istered & Certified With En / Eu Iso 13485 & Applicable 510Ii & Cl Certification , Adult Conventionalsingle Water Ttap Adult Conventional Single Water Trap ( Non-Heated ) Ventilator Circuits Are Avñlabjem A Variety Ofhi Iié Rent Configurations And Styles.Torcorpomle Standard Connectorsfor Use With A Variety Of Ventilators, Ported Wyes Allow } Rcssure Sensing And Temperature Monitoring And Include Tetheredcaps, Au Adult Conventional Circuits With 72 In. Long, Stanjard Ventilator Circuit With Stmight Cormector Inspimtory Limb Water Trap ( For Use With Hmes Only ) . Manufacturer Must Be I*S-Fda Registered & Certified With En / Eu Is0.1.348 O & Applicable 5I 0K & Cfi Certification. , Adult Ventilator Circuit Sincl E Limb Portable Adult Ventilate Circuit Fith Universal Single Limb. Lvlust Be Complete Kit With Rn Am Circuit Hoseexhii1‹Ition Yyve Manifold, Aerosol Hosepatient Elbow Connector. Proximal Airway Pressure Hne, Exha!Ationvaiv• Linea-Jhumidifier 1Im6 Can Facturer Must Be Us-Fna Registereds Certified Cth Fn / Fc Iso 13‹8: & Applicable S I 0K &F Ceni Ft Cation , Adult Ventilator Circul Single Water Trap Adult Convenfional Single M Ateramp ( Non-Hemed ) Ventilator Circuits Are Ayat Labie In A Variety Of Di Târeial Configiratiors And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allowpressure Sensing And Temperature Monitoring And Include Refered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Cjrcuat With Straight Conaaeetor Inspiratoy 1 Emb Water Trap ( For Use With Hmes Only ) Manufacturerrriust Be 1.1 S-Ida Registered & Certified With En / Eu Iso 13485 & Applicable 510K & Ce Certification. , .Adult Conventional Dual Limb Water Trap Adul T Conventionaldual Limb Wmer Trap ( Non-Heated ) Ventilator Circuits Are Available In A Variety R›!Cfi Jterent Configurations And Styles.To Incorporate Standard Connectors For Use V Ith A Vanely Of Venthators, Portedwyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72Iniong, Standard Ventilator Circuit With Straight Connector Dual Limb Inspimtory & Explratoryvater Trap 22Mm Tubije ( For Use With Hmes Only ) . Manufacturer Must Be Us-Fda Registered & Certifiedwith In / Eu Iso 13485 & Applicable 51 Ok & Ce Certification , Hifantprong Cpap Cannula Infant Prong Cpap Cannula Nasal Size 0 Wjth Designed To Recluse Trauma Assocjated With Delivery Of+ Ni Ant Nasal Cpap Must Be Sold Siliconised, Anatomically Curved Prongs To Enhance Fit. Luer Fi Tiing On Expiratory Connec I Or To Allow Proximal Airway Pressure Monitoringeach Set To Include, Soft Siliconisedcannula Lnsplratory & Ezpiratory Ct1 ‹ W Connector; Knit Cap; Two 6 M. Book Arid Loop Fastener Sections; Two 10 To 7.5 Mm Adaptors. Manufacturer M Ust Be Is-Ida Registered & Certified With En / Fu Iso 13485 & Applicable 5 } Ok ‹Ce Certification. , Fhme Head And Morsure Exchangersv / Ith Bacteria Viral Filters Bacterialf Iilration Efficiency & Gt. 99.99 % And Viral Filtration Efficiency & Gt 99 9999 % Filterr Membrane Should Be Of A Hydrophobicron-Roverpolypropylène Material. Sliould Be Tailorcd To Meet The Specjtic Needs Ofbotb Anaesthcsia And Intensive Care , Tracheostomyh Me. 1 Heat And Moisture Exchangersfor Spontaneouslybreathine Tracheotomypatients. 2 Should Ñave In Budt Oxygen Port. 3 Sl4o Éd Be Compact Camp, Ticket Vt 4 Shouldbe Stutable Fr Ambulatory Patients, Samp } Ing And Sucyoning Can Be Done With0ut Removjt ‹, Q 5 The System Should Havc Kink Rest Stmg Oxygen Tublng , Double Lumen Endo Bronchial Tube Left- Size-28Fr Low Pressurc Trachealand Bronchial Cuffisto Min Ijrse Risk Ofrn Pcosal Damage. Color Coded Bronchial Euh. Bronchialproxiinal Iumen And Bronchialpilotba|1Oon Assj$ T$Jn Locationott Ube And Tip When Vetificatîon1s C Onfirmeübyfiberopticbron0ho59 Pe. X-Ray Opaque Markers At Distal Lip Abo›E Bronclfial Cul And At Tracheal Openangfor Venficationof Tube [ Position. , Double Lumen Kndo Hronchlal Tuhe Left:Size-32Fr How Pressure Tracheal And Bronchialcuffs To M Înimise Nsk Of Mueosaldamage. Color Coded Bronchial Cuft, Bronclaialproximallumen And Bronchialpif Ot Balloonassists In Locaton Oi:Übe And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope X-Ray Opaque Markersat Distal Tip Aboie Bronchialcuff And At Tracheal Openmg For VerificationoftubejOsi Tion. , Doub E 1Uma Euüobronchîat Tube Loft.Size-35Fr Low Pressure Ficheal And Bronchial Cullsto Minima Se Risk Of Mucosal Damage. Color Coded Bronchialcuff, Bronch Tal Proximal Lumen And Bronchial Pmot Balloon Assists In Location I› I Lube And Tip When Verification Is Confirmed By Fiberopticbronchosccpe. K-Ray Opaque Markers At Distal Tip Above Bronchial Cuts And At Tracheal Opening Tor Verification Of Tube |Aos1tion , Double 1 Umen Findobronchial Tube Lefi, Size-37Fr Lowpressure Tracheal And Bronchialcliffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Curlbronchial Prommal Lumen And Bronchialpilotballoon Assistsin Iovation O1robe And Tip When Vent Cation Is Confirmed By Sberopticbronchoscope X-Rap Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Ven£Caiion Of Tube Position , Double I Timen Endobronchial Tube Left-Size-39Fr Low Pressure Nacheal And Bronchial Cliffs To Jrinijnlse Risk Of M Ucosal Damage. Color Cofied Bronchial Cu1t, Bronehj At Proximal 1 Ujcen And Bronchial Pilot Balloon Assists In 1 Ocapon O I Li Ibe And Tip When Verification Is Conf Rmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cutf And At Traclaeal Openinp• For Verificafio A Of Tube } ›Osition. , Double Lumen Endobronchial Tube 1 Ett.Size-41Fr Low Pressure Tracheas And Bronchial Cuffs To Minimise Risk Of Mucosal Fiarna_•E Color Coded Bronchial Culls Bronchialproximallumen And Bronchialpilot Balloon Assists Ie Location O1 Rr+Be And Tip When Ven Ficafion Is Confirmedby Fi Beroptic Bronclaoscope. X-Ray Opaque Markers At Dj Stat Tip Above Bronch Aj Cub Anfi At Tracheasopening For Verificationof Tubepos Itior , Double Lumen Endobroncliihtube Rightslze-35 F R Low Pressure Trackedand Bronch At Cu Fi To Jrjniirlze Nsk O I Mucosaldamage. Col Or Coded Bronchial Cuffbronchial Proximal Lumen And Bronchial Piiot Balloon Assists In Location Of Tube And Tip When Verificationis Confirmedby Fibreoptic Bronchoscope. X-My Opnque Markers At Distal Tip Above Bronchial Cuff Anh At Tracheas Opening For Ver Ification , Double 1 Um En Cndobronchialtube Right Ize-37Fr Low Pressure Tracheal Andbronchial Cutfs To Minimize Risk Of Mucosal Damage Color Coded Bronchial Curl, Bronchialpmiimal 1 Umen And Bronchialpilot Balloon Assists M Location Of Tube And Tip When Verification Is Confirmed By Fibreoptic Bronchoscope. X-Ray Opaque Markers At Distaltip Above Bronchial Cuff And At Tracheal Operjng For Verification Of Tube Position. , Double Lumen Endobronehialtube Rightsize-39Fr Low Pressure Tracheal Anfibronchial Cuffs To Minimize Risk Of Mucosal Damage. Color Codedbronch Dcuff, Bronchialproximal Lumen And Bronchialpilot Balloon Assists In Locwor Of Tube And Tip When Verificatj On Is Confirmedby Fibreo Ptic Broncboscope. X-Rap Oque Markets At D1sia1 Lip Above Brorchjal Cuff Ancl Attraehealopentag For Veiificati On , Sub-Giottic Tube Taplr Guard Evacsizes 6Mm The Tube Should Have An Additional ] Crnen Integrntedinto Tne Wah Of The Tube To Aliorsuctionmpvof Siitngjttic Space Shoulfihave Cuff In Taper Size To Prevent Micro Aspiration Shout D Have Low Volume / Low Pressure Cutf , Sub-Glottic Tu Be Tapfr Guard Evac: Sizes 6 5Mm The Tube Should Have An Additional Lumen Integratedinto The Wall Of The Tube To Allow Suctiomng Of S1Lopic Space. Should Have Cuff In Paper Size To Prevent Micro Aspirate On Should 1Aa›E Low Volume / Low Pressure Cuff. , $Rib-Glottic Tube Taper Gu.Ard E“7Acsizes 7Mm The Tube Should Have An Additional Lumen Integrated Into The Wall Of The Tube To Allow Suchonjng O I Em Iottic Space. Should Have Cutterpaper Size To Prevent Micro Aspiraflon Shouldhave Low Volume / Low Pressure Cuff , Sub-Giottictube Taper Guardevac. Sizes 7.Smm The Tube Should Have An Additional Lumen Inleeratedinto The Wall Of The Tube To Allow Sectioning Of Sulk Tottic Space. Should Have Cuff In Paper Size To Prevent Micro Aspiration 8Hould Have Low Volume / Low Pressure Cufl , Sub-Giottic Tube 4 Aper Guard Evac. Sizes 8Mm The Tube Should Have An Ad Dltional I Umen Integratedinto The Wall Of The Tube To Allow Auctioning Of Sul^J Ottjc Space Shouldhave Cuff In 4 Aper Sjze To Prevent Micro Aspiration Shound Have Low Volume / Low Presswe Cuff , Sub-Glottic Tube ?8Aper Guard Ev.Ac. Sizes 8.5Mm The Tube Should Have An 6Dditiop61 Lumen Inte@Ated Into The Wall Of The Tube To Allow Auctioning Of Tt| G ] Ottic Space Sho Ujd Have Cuff In Taper Size To Prevent Micro Aspiration Shoiild Have Low Volume / Low Pressure Cuff. , Sub—Glottic Tube Taper Guapd Evac: Sizes 9 Mm The Tube Snou1d Have An Additional Lumenintegrated Into The Call Of The Tube To Allow Suctiorfing Of S Ub°Lottjc Space. Should Have Cuf In Taper $We To Prevent Micro Aspiration Should Have Low Volume / Low Pressure Cuff , Lnflation Device Inflation Device In 3Oatm & 20M1 Wi Inclear Polycarbonatebarrel For Easy Visualisation Of Bubbles, I R+Jtnescent Dial, Airless Rotator› Locjr Release Handle For Easy One-Handed Control And Primelok For Easy Preparationusfda Apjaroved , Manifolds In 2, 3, 5Port Ns Th Configurationof Nett-Right Orientation, On-Ot F Handle, Full-Bad R Body, 200 Psi.500 Psi Rating And Wide Port Spacing. Seoul D Ha›E Slear Polycarbonatebody To Provide Durabijity And Visa La Il Ity, Airless Rotator And Large Bore Inner Furriertfrou%Out Inc1ud›Ne Rotatoi.Us¥Da Appicrved , High Pressure Tube High Pressure Tubing In 25Cmpith Braided. Flexible Tubing Of Polyurethane Mtcfi 1200 Psi. Usada Approyed , High Pressure Tube High Pressure Tubing In 51Cmpith Braided. Flexible Tubing Of Polyurethane Mtcfi 1200 Psi. Usada Approyed , High Pressure Tube High Pressure Tubing In 76Cm Pith Braided. Flexible Tubing Of Polyurethane Mtcfi 1200 Psi. Usada Approyed , High Pressure Tube High Pressure Tubing In 122Cmpith Braided. Flexible Tubing Of Polyurethane Mtcfi 1200 Psi. Usada Approyed , High Pressure Tube High Pressure Tubing In 183Cmpith Braided. Flexible Tubing Of Polyurethane Mtcfi 1200 Psi. Usada Approyed , Torque Device Torque Device For014 To , 038 Standard And Hydiophhe Guide Wires With Sq Ccczc- Oad-Release Mechanismusfda Approved , Radial Band Rafiial Hemostatis Band In 24 Cjr . Curvedbacjrer Plat With Large Area & Clear Unobstructed Site Visibility, Convenienttubing Clip With Two Check Valve Options And Dev Ice St I Ckersshould Be Available Math Standard Luer And Specialized Connection Syringeus Idaapproved , Rad Al Band Radial Hemostatis Band In 29 Cm. Cuwedbacker Ptat With Large Area H Clear Unobstructed Site Visibili3’, Convinient Tutting Ct Ipyth Two Check Valve Options And Device Str Akers. Shouldbe A›Yâab1e Crth Standard Luer And Specialized Connection Syinge. K S Fda Approved , Ange Ography Needle Atjqiographyne#D } E In 18G, Length Of 2-9Cmshout D Be Ayajlsble Irecho Enhanced & Em Ooth Finishergonomic Hub Wilh Level Orientation Point, Silicone Coated Stains Est Steel To Reduce Needle Drug And Superior Sharpness To 1‹ C + I Itate Entry Into Tissue And Vessel Wall. Usfd A Approved , Angioeraplayneedle Angiographyneedle In 19G, Length Of2-9Cm. Shouldbe Available In Echo Enhanced& Smooth 1Risbei ¿Onomic Hub With Bevel Orientation Point Silicone Coated S4ajrless Steelto Reduce Needle Dmg And Supeinor Sharpness Toive +Ltate Entry Into Tissue And Vesselwall. Us Fda Approx Ed , Angioeraplayneedle Wgiography Needle In 20G, 1En•Th Of 2-9C R.S1ould Be Available In Echo Enhanced & Smooth Tinish. Ei ;Onomic Hub Vdth Bevelorientation Po+Nt, Siheone Coatedstainless Steel To Reduce Needle Drag And Superior Sharpness Toi Ac Ili Atecnty Into Tissue And Vessel Wal I Fjs£Da Appro›Ed , Angiographyneedle Angiographyneedle In 21G, Length Of 2-9Cmshould Be Available In Echo Enhanced & Smooth Finishe ¿Onomic Hub With Bevel Orientation Poir I, Sjlicore Coated Stainless Steel To Reduce Needle Dme And Superior Sharpness To The Ilitate Entry Into Nssue And Vessel Wall Tjsfda Approved , Angiography Wire Ptfe Guidewire In .035 O38Inregularlegth. Shouldhave 3Mm J-Tip, Straight Tip, Pro-Coati Nfor Smooth Surface With Less Faction, Finger Straight-Able With Precise J-Tip Memory And Packedin Flush Loop With J Stra:I+Tener. Should Have Option Of Fixed Ccre, Movable Core, Heparin Coating, 1.5Mm I-Tip. Us Fda Approved , Angiographywire Long Length Ptfe Guidewire In 035, 038. With Exchangelength Should Have 300 J-Tip, Straight Tip Precoating Forsmooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memoryand Packed In P Rsla Hoop Wi I H .1 Stiaightener. Should Have Option Of Fixed Core, Movable Core, Heparij4 Coating, 1 5Mm J-Tip. Usfd‹ Appro›Ed , Amplatz Wire Ptfe Ainplatz Type Arein .035 And038, Length Of 75Cm, I 45Ein, L80cm. Should Be Available In Init I:I P.E Flexible Tip Length Of 1 Ocm;5Criocro6cm, 7Er» Andj 3 Ommusfda4ppro›Ed.Usrda App‹Ove6 , Hydrophilic Wirehydrophilic Guidewire Of 018, 025, 035, 038 In 80 Cm, 150Cm With Straight. Angled Tipshoul A Co»E In Stiff & Standardconfiguration Niñnol Core Polyurethaneackct Hydrophilic Coated Guide Wires With Rad Opatieacket For Enhanced Wslbil Iy Hydrated Get Coating And True . Itorquenj Sfda Approved , Hydrophilic Wire Long Length Hydrophrilic Guidewe Ot.0 I8.025, 035.038 In 180Cm. 220Cm. 260Cm Length With Straight Angled Tip Should Come In Stiff & Standard Configuration Nitinol Ore Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visiblity Hydrated Gel Coating And True 1:1 Torque Usfda Approved , Hydrophllic Bmided Sheath Hydrophllic Bmidedsheathjntroducer In 4F To 7F, Lergt ] Of 7, 11, 16, 23Cmwith The Option Of.018 021 , .025 Plastic Jacketed And Sprin° Coil Guidevire. Should Have Ultra-Thin Wall And Fiai Vdre Braidlng Technol Ogy To Preldc Support And Low Profile Usfda Approved , Femoral Sheath Wilh Needle Femoral Sheath In 5Fto 8F, Length Of 11-232Cmwith Punched Needie Of 18G And Gidewire Of035, 038 Should Haverotating Suture Ring, Snap-Fit Dilator To Prevent Slipping Duimg Insertion And Holster Packshould Be A Ai Table In Polypropylene Usfda Approved , And Ography Catheter Diagnostic Catheter In 4F - 6F, Length Of 70- I 10Cm& 125Crn , Should Come In Yabous Shapes & Cute Lengthincluding Jl & Jr ( 1.5, 2. 2.5, 3. 3.5, 4, 4.5, 5, 6 Cm ) , Al, Ar, Tig, Mp, Im, Sones, Pigtail ( Straightangle, Radial ) Sloom D Have Flat Wire Braidingh Nylon Material Thin Wall Design For Higher Flow Rates Radio-Opaque Tip Strain Relief And Wingedpolycarbonate Hub Shohj Fi Be Available In Yabous Configurai Ons- Branded, Nomabraided, Short Tip, Bumper Tip, Sideholes As Applicableus Fda , Angiographyradialcatheters Diagnosticrad Ial Catheter Vith Radial Ulhmate Curve In 4-6Flenght Ofl00cm110cm, L2ocm S Laotild Have Four Type Of Radi Ai Ultimate Curves. Shouldhave Flat Care Braldine, Nylon Material, Thin A All Design For Higher Tloorates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate ] Jijb. Us Fda Approved , One Hop &Triple Loop Mare Snare Kit ( 2-35Mmdj Ameter, 90-Degree Nitinol & Gold-Piated Tungsten Loop ) And Multijoop Snare Kitt2-4 Ohm Diameter, Three Interlaced N Ijcol Loops ) For Foreign Body Retrieval, Should Come With Flexible, Reinforced, Strain Rel E H C+ B To Reduce Buckling And Unique Peel Awayinsertion Tool. Usfdaapproved , Ptca Kit ( 1 ) Three Port Manifoldv Itla J‹Nobs To TumRight” When Open ( 2 ) One Pressure I Ine, ( 3 ) Fluid Connec I I R I Ine, ( 4 ) Contrast Coi!Iaecting Line, ( S } One Three Way Stop Cock ( 6 ) One Y-Connectorloemoststi E Valve Witty Spring Type { U Ush And Release Mechanism, ( 7 ) One Rich Ation Dev Ce Vzth Manometer Upto 30 Atm ( Easy To Operate With 1 Uminescer T D +A1 I8 ) One Luer Lock Controlled Syringe Of 10 Jul Wjtil Finger Grip ( 9 ) Insertionneedle, ( 10 ) Torque Device.Usfda Appro› Ed , Closed Suctiorcatheter For Paediatrics Number And Color- Coded Graduations 1Or Controlled Depth Suctioning.Separate Y Connectors Available‹›R Different Tubes In The Pack.Catheteris Made Up Of Medical Grade Siliconmaterial Sizes Are 5Fr , Closed Saction Catheter For Paediatrics Number And Color- Coded Graduations Fur Cc›Ntrolâ Ed Depth Summoning Separate Y Connectors Availabj E Birr Different Tubes In. Be Pack Catheter Is Mnde Up Of Medical Grade Silicon Material. Sizes Are 6Fr , Closed Suction Catheter For Paediatri Cs Number Andcolor- Coded Gradualions For Controlleddepth Suctioning.Separate Y Connectors Avadab1cliar Different Tubes In The Pack Catheter Is Make Up Of Mcdi Cd Grade 8 J4lcon Materalsizes Arc Qtr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Control Led Depth Sectioning Separate Y Connectors Availabl C For Different Mbes In The Pack.Catheter Is Made Up Of Ir Edical Grade S Jjicon Material.Sizes8fr. , Closed Suction Catheter For Paediatries Number Andcolor- Coded Gaduationsfor Control I Ed Depth Suctionipg.Separate Y Connectors Availabl E For Different Tubes In The Pack Catheter Is Made Up Of Medical Grade Siheon Material.Sizes Are1ofr , Closed Suction Catheterfor Paediatrtcs Number Andcolor- Coded Graduationsfor Control Led Depth Suction Ing.Separatey Comiectors Avaijabj E Tier Different Tubes In The Pac1‹. Catheter Is Made Up Of Medical Grade Sil Iconmaterialsizes 12Ir. , Paediatric Endotrachealtube Paediatric Microculf Designed According To The Paediatric Sratomy .Cuffis Mnde Up O1 Polyiir Ethane.31I Ckress Of Cub S 10 Micronsnfj Crocuff Seals At Araverage Cutt Pressure O1 1 Icmh2o Burst Pressure O1 Cuff Is 805Crnh2‹›Auatomicahybased Intubationdepth Marking With Precisi On Bands.Cuff With Pj Ay Mode Function. Sizes Are 3Rrur. , Paediatric Endotrachealtube Paediatric Microcuff Designed Accordingto The Paediatric Anatomycuff Is Made Up Ofpolyurethane. Thickness Of Cuff Is 10 Microns Microcuff Seals At An Avemge Cuff Pressure Of 11 Cmh2o.Bcrstpressure Ofcuff Is805cmh2oanatoiricaly Based Intubation Depth Markingwith Precisionbands Cuff With Play Mode Function Sizes Are 3.5Mm , Paediatric Findotrachealtube Paediatricm Icrocuff Designedaccording To The Paediatrc Anatomy.Catt Is Made Up Of Po1ycirct1ianc, T1 I Ckness Of C Ml Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o Burst Pressure Of Cuff Is 805Cinh2o . Natomically Based Intubationdepth Markme Veth Precisionbands.Cuff With Play Mode Functionsizes Are 5 5Mm , Adult Endotracheal Tube Cuff Is Made Up Of Ployurethane.Thickness Of Cuff Is 10 Microns.Microculf Seals At An Average Cuff Pressurc Of 20 Cmh2o.Burst Pressure O1 Cull Is 800Emh2o. Cuff With Playmode Function Sizes 5.5Mm , Adult Endotracheal Tube Cuff Is Made Up Of Ployurethane.Thickness Of Cuff Is 10 Microns.Microculf Seals At An Average Cuff Pressurc Of 20 Cmh2o.Burst Pressure O1 Cull Is 800Emh2o. Cuff With Playmode Function Sizes10mm , Kimventbecath Non Bronchoscopic Box For Bronchialaspirate Sampling. Can Be Performed In Minutes At Bedside1â I Rectiorialfipalloys Right Or Left Lung Sampling Maintains Prep When Used With Suppl Ied Ventilator Adaptersofi, Cushiore‹I Radiopaquehp F-Or Safe Sampling. Protected Vjt1a Outer Catheter Covering. T Size 13Fr , Kimventbecath Non Broilchoseopic Bal For Bronchial Aspirate Samplingcan Be Performed In Minutes At Bedside.Tâ I Sectional Tjp Allows Right Or Felt Lung Sampling Maintains Peep When Used With Supplied Ventilator Adapter. Sofi, Cusbio»E‹!.Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering Sizes16fr , Disposable Spo2 Sensor It Should Be Base On Originalnellcor Tecbnol Oey Withongmaloximaxtechnology , Catheter Mount Doubt E Swivel Connector.It Should Have Bronchoscopyport . It Sholud Be Approvedby Usfda , Gastrostomy Feed Ing Tube Medical Grade Sjlicone Construchon. Lcw Poodle Desigo. Tapered Distal Lip, S1tcone Internal Retcnl Ir›Iiralf Oon. Distal Tip Recessed At 5M.Lpiozimalanti Reflux Velvc Secur Lok Extention Set Connector Mechanisnradiopacj Ue Stripe, Gamma Sterilized Siz—E I 2, Length ( 0.—Fi5.0 ) , Gastrostojry Feeding Tube Medical Grade Siljcone Constructionlow I*Ro1ije Design.Tapered Distal Tip, S Iljcone Intern.Alretenti‹»Aballoon.Pistal Tip Recessed At 5M Lproximalanti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radioya‹ U.• Stripe.Gamma S Terilizeds Iz—E14 Length ( 0.—85.0 ) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Ny, Si1icone Internalretent Onballoon Distal Tip Recessed At Sm Lproyjma| Anti Reflcx Valve.8 Ecur Lok Extention Set Connector Mechanism.Radiopac| Ue Stripe, Gamma Sterilizedsize — 16 Lengtht0 8 — 5.0 ) , Gastrostoiry Feeding Tube Medical Grade Silicone Construction Low Profile Design Tapereddial Lp, S11icone Internalretenti ‹›N 1Al1oon.Distal Tip Recessed At 5M.1Proximalanti Reflus Val›E.Secur Lok Extention Set Connector Meehanism, Radiopa9 Ue S Tripe, Gamma Stenlixeds Iz—E18, Lcngth ( 0.S—5.0 ) , Gastrostomy Feeding Tube Medical Grade Sh Icone Construction.Low Profile Design.Tapered Dislal Tip Silicone Internal Retent+Canball Oon Disral ‘Tip Recessed At Srn.Lpro:Simal Anti Reflux Valve Secur Lok Eitention Set Connector Mechanisrn, Radiopacjue S Tripe, Gamma Ster+1Mds Ize — 20 Length ( 0.—85 0 ) , Gastrostomyfeeding Tube Medicagrade Silicone Construction.Low Profi Ie Design.Tapered Distaiup.Silicone Internal Reten1+Onball Oon Distal Top Recessed At 3M Lproxiiral Anti Regux Value Scent Lok Extention 8 Ct Corrnector Meehanism, Radiopac|Ue Stripe, Gamma Sterile.Ed Size — 2‹Tr Len H ( 0.8—5.0 ) , Percutaneousendos Copic Gastrostomy ( Peg ) Medical Grade Silicone Constructioja Externalretention Ringuniversa| And Bogus Feedmg Port Co;-Irirctors, Medjypjj Port Col Lapsible Internal Retention Bumper.Radiopaque Stripg And Pumper. Lubing C ] Amp Ei 0Steri Ljzed.S Ize-S I 4Fr , Percutaneousendoscopic Gasprostomy ( Peg ) Medical Grade Silicona Constructionexternal Retentionring .Universaladbolus Feedmg Port Colncctors, Medicatjon , °Ort.Co1lapsibie Internal Retention Bumper. Radiopaque Stripo And Bumper Tubing Clamp Eto Sten1 J Zed Sizes —20Fr , Percutanyou S Endos Copic Gastros Tomy ( Pec ) Medical Grade Sin Icone Construí Tion.Externalretentionr Mguniversal And Bolu$ F9edjjjq Port Cole Necir3, ] Vt#Djqatj Jj Port.Coi1apsib1c Internal Retentiondurnper.Radio } Aaque Stripe And Buinpcr.Tubing Clamp Eso Steril Ized Size—S24fr , Silk Protein Based Stent E Surgical Pufeajr Dressing Non Adhesive I3j Oulodlfied, Silk Protein Based, Sterile, So11. Conformable, Absorbent, Douhle Layered Polvurethene Loan Dressingcomprised Of Sill Protein 8% And Asiaiicoslde Elt 0 6%, Ivjth Super Fluid Handling Capacity, Decreases The Risk ‹›! Iuacerauon.Ster1ization-Camera Sterlized , Silk Protein & Antimicrobialranosilver Based Sterile Surgical Pu Foam Eressing Non Adhesivebiomodified, Silk Protein & Silver Impregnated Soft, Corformable, Absorbent, Double Laered Polyurethene Foamdressingcoinprised Ofsilk Protein 8%, Asiaticoside Nlt 0 6% Abad 8 Ijver 1.2%With Super 11 Mí Laandling Capacity, Decreases Dye Risk Of Inaceratioiysterlizotior-Gamma Stern Ized , 4 Ilk Protem & Antimicrobial Si1›Er Based Sterile Surgical Mesh Wound Dressing Bjomodified. Bid Ainjcaled Silk Protein And Sit Ver Wound Dressing With Mesh Pores To Facilitatethe Eas ‹1I Ainage Of Exudates, Compri Sed Of Acti›Atedsilk Matrix 46?O And Asiaticoside Nlt 0 6% And, Steri Ination-Gamma Sterlized 8 +1› Er I2%. Non- Adhesit• Esquare / Rectangular In Shapc, Steri Jzatlon-Gamma Sterlized , Silk Protein & Antimicrobial Nanosllver Based Sterile Surgicalwounddtess Ing Sheet Bio Rofilfiefi, Bilaminatedsilk Protein & Sil›Er Based Surgical Wounfidressing Comprised Of Aetjvatet!Silk Matrix 46% And .Asiatieoside 0.6% And Silver :1 .2%. Non- Adhesjsquare / Rectangular In Shape, Sterlizatior-Gairm A Sterlized , Sink Protein Derived Sterile Surge Cal Meshefi Wounddres Sing Bio Modified. Bilaminated Silk Protein V Ound Dressing With Mesh Pores To Facilitatethe Easy Drainage Of Exudates, Comprisedof Activated Silk Matrix 46% And .A S I.Itjcoside Nl30 6% Non- Adhesii E Dressing, Square / Rectangular In Shape, Sterl Ization-Gamma Sterhzed , Silk Protein Based Steriie Surgical Wound Dressing Sheet Biomodified, Bilaminated Silk Protein Wound Di Essing Compnscd Of Activated Shk Matrix 46% And Asiaticoside Nlt 0 6%. Non- Adhesive Dressing, Square / Rectangularshape.Ster1ization- , Silk Protein Based Aniiirlerobial Woirndhealing Oinmientloaded With Asiatj Cost De And Silver Bio Modified Sj Lk Protein And Silver Based Wound Healing Ointment Comprised Of Sillpowder 8% , As U 1 + Coside Nlt 0 6% And S Ilver: I.2%, Sterl Izati On-Gammasterilzed , Silk Protein And Nanosilver Based Microbicidalsten ] E Surgical Wound Dressing Sprinkling Powder Boi Thg1oinod¡Fied Sin Protein And S Iller Based Micro Bicidal Sprinkl Irgpo Der, Cojrprised Of Shk Powder 8%, As Iaticosidenif 0.6% And Silver .1 2% Conforms To Any Wound Shape And Size, Easy To Apply.Steriization-Gamma Sterlized , Silk Proteinbased Sterile Surgical Sound Dressing $Prinkl Ing Powder Bottle Biomodifiedsilk Protein Based Noundhealing Sprinkling Pow‹1Er, Co Rpri Sed Of Silk Powder 8% Andas I Atieoside Nlt 0.6% Conforms To Anv Wound Shape And S Ize, Easy To Apply.Sterlization-Gamma Stern Ized , Centella Asiaiica Extractbased Skinroisijmc Or And Antiscar Gel Centella Asiatica Extract Based Skin Moisturjzation And Aritiscar Gel, Comprisedof Centella Asiatica Extrac L Glycerol And V Itamine., Sterlization-Gamma Sterlized , Silkprotein Basedsterñe Surgicalparticle Wounddressinpbiomod Ified, Bioabsorbable Silk Protein Anal Collagen Cortairing Qarticle Wovnddressing, Comqrtsedof Silk Qowder A% , Aslatlcosjde 0.6% Arts Co1 ] Agen, Baving Natul Allnoistufizing Factor ( Nmt ) , Suitable For Cavity Vound Andarry Kind Of Slow And Non- Healing Wound, Sterlization-Ganijala Sterlized , Silk Protein And Antimacrobialnanosilver Based Sterile Surgical Phicle V Ound Dressing 5Ml Biojr Difiod, Bioabsorbable Silk Protein, Collagen And Silver Containing Broadspectrumantjmi Crobj Atparticle Wounddressing , Comprised Of Silk Powder 8%, Asiaticosifie 0.6% .Having Natural Mo Stunzmg Factor ( Nsf ) . Sui Table For Deep, Tu+One King Cavity Wo Und Or Any Kind Of St Ow And Non- Healing Wound, Sterlization-Gamma Sterlized , Silk Protein And Antimicrobial Nanosilverbased Sterile Surgical Parncle Wound Dressing1omlbiomodified, Oabsorbable Siik Protein, Collagen And Siler Containing Broadspectruin Antimicrobialparticlewoundvjressing , Comprised Of Silk Powder 8%, Asiaticosidc 0.6% , Having Natural Moisturizing Factor ( Nmf ) , Suitable For Deep, Tunnel Ing Cavity Wound Or Any Kind Of Slow And Non- Head Ing Wounhslerlizalion-Gamma Sterlized , Silk Protein Based Non-Woven Backed With Pad & Seltadbesi Ve Border, Water-Repellent Sterile Surg*Calfi Ressing 10*20Cm, Silk Proten And Nanocrystalline Si Leer Based Highly Conformable Sterile Antlmicrobialdressing With Ad1ctive Backing And Absorbent Layer , Sterlizntion-Gamma Sterlized , Sillr Protein Based Non-Woven Backed With Pad & Sell Adhesive Border, Water-Repellent Sterile Srirg Ical Dressing I0*2Ñcm, 8Ilk Protein And Nanocrystal Iine Sit Ver Based Highlyconformable Steel C Antiiricrobial Dressing With Adhesivebacking And Absorbent Laver , Sterhzation-Gamma Ster1ized , Silk Protein Based Non-Wovenbacked V Ith Pad & Self Adhesive Border, Water-Repellent Sterile Surgcaldressmg15*15Cm Sillr Protein And Nanocrysiajl Ine Silver Based Highly Confonrable Sterile Antimicrobialdressjrjg Wjth Ad!Aesive Backing And Absorbent Layer , Steriization-Gamma Stcrlized , Slib Protein And Pu Foam Pad With Sell Adhesive Border, Naier-Proof Dressing For Post-Operative Scar Or Any Scar Managemen 10*20Cm , Sick Protein Based Highlyconformable Sterile Pu Foam With Antiscarring Properties And Ad*Es Ve Backin, Sterlization-Garnera Sterlized , Silk Piotem Arid Pu Foam Pad With Set I Adhesive Border, Water-Proof Dressing For Post-Operalve Scar ‹›Rmy Scar Managemen 10*2Scm Siik Protein Based Highly Contficnable Sterile Pu Foam »Nth Antiscamng Properties And Ad Laesive Backimsterlizauon-Gamma Sterlized , Silkprotein And Pu Foam Pad With Self Adhesive Border, Water-Proof Dressing For Post-Operative Scar Or Any Scar Management 10*20Cm Silkprotein Based Highly Confonnable Sterile Pu Foam With Antiscarring Properties Andnd Hesive Backm, Stcrlization-Gamma Sterlized , Silk Proteinnanosilver And Asiancosid C Based Pu Film Backed With Pad & Self Adhesive Border, Ther-Proof Sterile Surgical Dressing 9*21.Gemsilk Protein, Ranocrystalline Silver & Asjaticoside Based Highly Corformable Sterile Anomjcrobialsurgical And Scar Free Woiuld Healing Dress*Ng Ntb Adhesive Backing And Absorbent Jayer, Sterlization-Gamma Stcrlized , Silk Protein, Nariosalver And Asiaticosifie Based Pu Film Backed With Pad & Self Adhesive Border, Water-Proofsterile Surgical Dressing 1025Cmsixprotein, Nenocrystalllne Silver & Asiaticoside Based Highly Conformable Sterile Antimicrobial Surgical And Scar Free Wound Healing Dressing With Adhesve Backing Anfi Absorbent Iayer, Steriization-Gamma S Tcrlazed , Silk Protein And Antimicrobialnanosilver Impregnatednon-Afierent Leno Gauze Sterñe Surgical Wound Dressing 10*10Cm Silk Protein & Nanocrystailine Silver Based Sterile Non-Adherent Antimicrobial Gauze Dressing Sterlization Ganna Sterlized , Silkproteinand Antimicrobial Nanosilver Impregnated Non Adherent Leno Gauze Sterile Surgical Wound Dressingh 10*25Cm Silk Protenin & Nanocrystalline Silver Based Steril Non Adherent Amtimicrobial Gauze Dreeingsterlization Gamma Sterlized , Silk Protein Impregnatednon-Adherent Meno Gauze Stenle Primary Surgical Wounddressing 10*10Em S11 K Protein Based Sterile. Nojj-Adherent. Antimicrobial Gauze Dressing , Sterlizallon-Gamma Ster ] Ized , Silk Protein Impregnatednon-Adherent Meno Gauze Stenle Primary Surgical Wounddressing 10*25Em Silk Protein Based Sterile. Non-Adherent. Antimicrobial Gauze Dressing , Sterlizallon-Gamma Ster ] Ized , Pyaain-Urea & Silk Proteinbased Wound Debriding Ointment And Cream 25Gin Papain-Ureabased Fiebriding Ointment Sud Cream For Rejnoval Of Necrotic Óssue And Slough In Infectcd Uounds. Containing Papainl . •52 1700 Units Arid Urea Ip . 100Mg , Papaln-Urea & Sill Protein Based Wound Debriding Omtment And Cream50gm Papajc-Àreabased Debridj Ag Ointment And Cream For Rejnoval Of Recrotic Tissuc And Slough In Infected «Ounds, Contan Ng Papain Ip . >521700 Units And Urea Ipi 00Mg , Silk Protein, Asiaticosidc Anò Povidone Iodine Based Broad Spectruirtopical Aritiseptic And Antjjnicro B Ial Wound Healing Ointment 25Gmbroad Speeírum Antiseptic And Antimicrob Tal Topreal Of Ntment Contajn Ing Povidone Ionineusp5% W / W, Silkproleln, Center Ja Asiatic0 For Prevention Of Skln And Wound Infections , Silk Protein, Asiaticoside And Povidone Jodine Òased Broad Spectrum 1Opu.Al Aiatisept; C And Antimicrotom Wound Heajing Omtment50cin Broad Spectrumantisept C And Antimicrobial Topicsl Oindnent Containing Povidonc Ioú J Ue Usp5% W / W, Sili Proteincentella Asiarea For Preventionof Skin And Wound Infeetions. , Anti Mlcrobial G1oves Size 6, 6.5, 7, 7.5, 8 , Anterior Chamber Iol Pmma Material, Single Piecekelrnanmultiflex Design 5-6 Mm Optio Size With 12-13 Mm Overal I Sizeconvex Power Range * 12 To +24Should Be Iso Or Ce Certificdmarufacrurer Shoul D Be Asked To Sample For Approval , Capssar Tension Ring Standard Capsular Tendienringpmmmaterial With One Eyelet Each At Each End10 Mm To ! 2 Mm Overal I Diameter Sterile Shoulfibe Iso / Ce Certified Mfg. , Iris Hooksdetractors Set Of Five Disposable Steri Le Iris Hooks With So Ú Sis Icon Stopper Stcrile Peek Should Be Made Pmma Ii O / Ce Certified !Vifg. , Sillcone Rod For Ptosis Repair I Nplantable Fiexible Sis Icon Rod Attached To Majjeable Sharp Needles With A Siiicon Sleeve. Leed1et.Engihi 0-70Mm Djameter 920 Glength Of Silicone Rod 40Crn, Lengih Of Silicon Sleeve 0 7 Mín. , Reusable Anaestbet A Face Maskof Silicone A Utocalvablempere Transparent U8 Fda Approved And Size Should Be Mentioned On Mask Isze -0 , Reusable Anaesthetia Face Mask Of Siiicone Autocalvable & Pure Transparent.Us Fda Approved And Size Shouldbe Jrentionefion Mask Size-1 , Reusab Íe A Naesthetia Face Mask Of Sllicone / Yutoca1vable & Pure 1 Ransparert.Us Fda Approved Ajad Size Shouldbe Mentioned On Mask Size-2 , Rcusable Anaesthetia Facemask Of Sdico Ne Autocalvable & Pure Transparent.Us Fla Approved And Size Shouldbe Inentioned On Mask Size-3 , Reusablea Aacsthetia £Ace Mask Olsjj1cone Autoeaji Able & Pure *Ransparent Us Fda Approved And Size Should Be Mentioned On Masksize-4 , Reusable Maesthctia Face Rnas1‹ Of Siiicore Autocajvablc & Pure Transparent.Us I Da Approved And Size Should Be Mentionedon Mask. Size-5 , Flow Regulatorextension Set Flow Rate 2Ml To 350M1 Per Hour , Steriledisposable Hypodermicneedle No18*1.1 / 2 , Sterile Disposable Hypodermicneedleno. 21*1.1 / 2 , Sterile Disposable Hypodermic Needleno. 23*1.1 / 2 , Neonatal Sin%E Heatedwire Breathing Systemwith Autofillhumidi Fican On Chamber In Steriie Pac Ku D Us Fda Approved. Shouldbe Compatibleevery Humidifier , Paed. Single Heated Wire Breathing Systemwlh Autofill Humidification Chamber In Sterile Pack An Clus Fda Approved. Should Be Compatible Everv Humidifier. , Adult Sulgle Heated Wire Breathing System With Autofill Hurn Idificationchamberin S Terile Pack Andus Fda Approved. Should Be Compatibleeven Humidifier , Neonatal High Flow Nasal Cannula Having 8 Litre Flow Should Have Soft Tip . , Pur-Xro Catheter 20 Em, 28G Ifr Pice Line With Stylet, Splittmg Needle With Securing Wings Vit+A 8 Cm Extension Tubing ( Flow Rate 1Ml / Min ) , Per-Xro Catheter 30 Cm, 24Gj2fr Picc Line With Split Cannula And 10Cm Extension Tubing Over Erms Eter ( Flow Rate , Dead Bodybas7x3 Fi Size Lead Proofmaterialpp Closed On All Other Sides And Zip Ped On Front Or On› Sodes , Introducer Sheathwtth Punctureneedlefor Adults Us Fda Approved10-11 Cm Long Hack Must Mclude 18 G, 6-7.5 Cm Long Puncture Needle.0.035 Or 0 038 Mch Guide Wire Oompat+Blevith Haemoslatic Valve Oprevent Back Leak And Air Aspiration-Integral Side Port O I Th Allached 3-My Stopcock With Suture Eye For Secunog Sheathkbresistant With Dilator-Sub Lock Mechanism To Prevent Its Back-Out During Insertionwith Smooth And Resistance Free Insertion Size 4Fr Standard Length , Introducer Sheathwtth Punctureneedlefor Adults Us Pda Approved10- I Icm Long Pack Must Include 18 G, 6-7.5 Cm Long Puncture Needs E.0.035 Or 0.038 Inch Guide Wire Compatiblewith Haemostatic Valve To Prevent Back Leakand Air Aspiration Integral Side Port Itill Attached 3-Way Stopcock With Suture Eye For Securing Sheathkink Resistant With Dilator-Hub Lock Mechanismto Prevent Its Back-Out During Insertion With Smooth Aaad Resistance Free Insertion Size 9Fr Standard Length , Introducer Sheathforadults ( Size 10 Fr.. ) ( Standard Length ) U8 Idaapproved Us Gfsce / Dgci Approved 10-11 Cm Long0.035 Or 0 038 Inch Guide Wire Compatible With Haemostatic Valve To Prevent Back Leak And Air Aspiration Integral Side Port With Attached 3 Way Stopcock With With Eye For Securing Sheath Kink Resistant With Dilator Hub Lock Mechanism To Prevent Its Back Out During Inscrtion With Smooth And Resistance Fuee Insertion Us Fda+Ce / Dgc Approved Ci Approved Size-10Fr , Intoducer She.Rth For Adu Lts ( Size 11 Mr ) ( Standard Length ) Us Fdaapproved Us Fda+ Ce / Dgci Approved10-11 Cm Long0.035 Or 0.38 Inch Guide Wire Con Pat Bie Uith Haemo
Contract Date: Sep 18, 2023 Contract Value : ₹ 59.00 Lakh
Government Departments No of Bidders 7
Rajasthan View Result →
46.
Defence #1782089 AOC
Provision Of 33 Kv Receiving Stn At Af Station Palam, New Delhi. 1 Supply Laying Jointingtesting And Commissioning Of 33 Kv ( E ) Grade Of Size 185 Sqmm 3 Core ( Heavy Duty ) With Stranded Compacted Circular Aluminum Conductor, Conductor Screened With Extruded Semi-Conducting Compound, Xlpe Insulated, Insulationscreened With Extruded Semi-Conducting Compound In Combination With Copper Tape, Cores Laid Up, Inner Sheath Of Thermoplastic Tape, Pvc Bedded, Galvanized Steel Striparmoured And Over Allfrls Pvc Sheated Conforming Tois-7098, Part -Ii With Latest Amendmentslaid In Cable Ducts / Trays / Trenches / Encased In Gi Pipes / Rcc / Dwc Hdpe Pipes Complete All As Specified And Directed. 2 Note For Item No 1 ( I ) Each Cable Drum Not Less Than 500 Mtr Length ( Ii ) The Contractor Will Be Responsible For Taking Permission From Appropriate Authority I.E. Nhai / Igl / Cantt Board Or Other Units , If Needed For The Above Said Cable Work Necessary Payments For Work Clearence / Deposit Chargesfor Appropriate Authorityto Be Incuded In The Rate Quoted Above ( Iii ) Manual Excavation Has Be Carried Out At The Places Of Services Such As Of Near Existing Ht / Lt Cables, Ofc / Telecom Cables , Water / Gas Pipe / Sewage Pipe Lines, Area Drinages And Contractor Shall Be Responsible For Rectification Of Damages Immediately On Priority To The Damages Of Servicesoccured During Exection Of The Cable / Earth Work. 3 Supply, Jointing And Testing Of End Termination Joint Outdoor Type Heatshrinkble Type Complete With Jointing Material And Accessories Suitable For 33 Kv ( E ) Xlpe Armoured Aluminium Conductor Cable Of Size 185 Sqmm 3 Core Complete All As Specified And Directed. 4 Supply, Jointing And Testing Of End Termination Joint Indoor Type For 33 Kv Gis Panel Touch Proof Type Complete With Jointing Material And Accessories Suitable For 33 Kv ( E ) Xlpe Armoured Aluminium Conductor Cable Of Size 185 Sqmm 3 Core Complete All As Specified And Directed. 5 Supply, Jointing And Testing Of Straight Through Joint Outdoor Type Heatshrinkble Type Complete With Jointing Material And Accessories Suitable For 33 Kv ( E ) Xlpe Armoured Aluminium Conductor Cable Of Size 185 Sqmm 3 Core Complete All As Specified And Directed. 6 Supplying, Installing, Testing And Commissioning Of 33Kv, 630A, 25Ka / 3 -Sec, Iac, Aflr, Gas-Insulated Type Vcb Panel Making Arrangement Ip 4X Indoor Suitable, Floor-Mounted, Complying To Iec 62271-200 For Design, Manufacturing And Type-Tested, Including Internal Arc For Operator Safety ( Iac 26.3Ka / 1-Sec ) , Having 02 X Incomming +01 Bus Coupler+With 01 Bus Raiser+02 Out Goingall Inside Gas-Insulated Ip65 ( Partition Class : Partition Of Metal ) Ss 304 Grade Ss Tank ( 2.5 Mm Thickness ) , Flush-Front Mechanism Having Lockable Access Door With Mounted Bay-Protection And Control Scheme, Including Leds, Mimic Etc. As Prescribed Below , Also Scada Complying To Iec 61850 :- 7 ( I ) Rated Voltage / Maximum Operating Voltage - 36 Kv, ( Ii ) Rated Power Frquency Withstand Voltage 70 Kv, ( Iii ) Rated Lighting Impulse Withstand Voltage 170 Kv, ( Iv ) Rated Frequency 50 Hz, ( V ) Rated Short Circuit Making Current 80 Ka, ( Vi ) Rated Short Time Withstand Current 31.5 Ka, ( Vii ) Rated Duration Of Short Circuit 3 Sec, ( Viii ) Rated Opening Time = 45 M Sec, ( Ix ) Rated Break Time = 60 M Sec, ( X ) Rated Auxiliary Voltage 110 V Dc. ( Xi ) Gis Vaccum Interruter Main Numerical Relays & Meters Must Be Same Make For Better Life Cycle Optimization. ( Xii ) Each Vcb Shall 02 Nos Tripping Coil. 8 ( A ) 02 X Incomer 33 Kv Gis Panel, Each Comprising Of :- 9 ( I ) 33 Kv, 630 Amp, 25Ka / 3 -Sec, Draw-Out Vacuum Circuit Breaker As Per Iec-62271-100 With Roll On Floor Type Vacuum Circuit Breaker Having 03 Nos. Vacuum Bottles Of Same Make As Of Circuit Breaker And Panel, Motorized Spring Charging Mechanism ( 230Vac ) With Integral Spring Charging Handle For Manual Charging, Associated Push-Buttons, Anti-Pumping Feature, And Associated Shunt Trip / Close Coils ( 110V Dc ) . 10 ( Ii ) Current Transformers 33 Kv 100 / 1-1 Amp, Core1: Class 0.5, 10Va, Core2: Class Ps-X - Set Of 03Nos Per Breaker 11 ( Iii ) Potential Transformers, Draw-Out Type For Easy Maintenance, 33Kv / Rt3:110V / Rt3, 50Va, Cl.0.5 With Associated Gun-Type Hrc Fuses And Mcbs For Ht / Lt Isolation - Set Of 03 Nos. 12 ( A ) Transient / Intermittent Earth Fault Protection ( B ) Phase Discontinuity Protection ( C ) Aux. Protections Incl. Trip Circuit Supervision, Circuit Breaker Failure Protection, Master Trip Etc. ( Iv ) Main, Numerical, Drawout Protection Relay ( Line Differential ) With Large Lcd Displaying Mimic Bay For On / Off Control And Monitoring Of Feeder Parameters Listed Below And Built In Disturbance Recorder Cycle. The Relay Shall Be Fully Integrated With The Feeder, Internally Capturing Feeder Statuses Incl. Breaker On, Off, Spring.Charged, Disconnector On, Off, Earth, Line-Current / Line-Voltage, Trip Circuit Healthy, Gas-Pressure Low In Breaker Chamber, Gas-Pressure Low In Busbar Chamber, Ac Supply Fail, Local-Remote Switchthe Relay Shall Have Built-In Back-Lit Lcd Screen To Show Single-Line-Diagram And Other Relevant Parameters. 13 The Relay Shall Be Communicable On Iec 61850 Goose Platform Over Double / Redundant Rj-45 / Usb / Fo Port, Having Required Protection Functions Including ( A ) Line Differential With High Set And Low Set ( Stabilized ) With Second Harmonic Restraint To Bypass Transformer Inrush. The Scheme Will Be Implemented Using Single Mode Fibre Optic Protection Communication Link Between Local And Remote Relay. Suitable Blocking Arrangement Shall Be Available To Prevent Nuisance Tripping Due To Loss Of Connection, ( B ) Over Current And Earth Fault Protection With Minimum Pickup At Low Set Of 5% And 1% Respectively, ( C ) Transient / Intermittent Earth Fault Protection, ( D ) Phase Discontinuity Protection, ( E ) Synchro-Check Between Incomer-01 And Incomer-02 14 ( V ) Flush Mounted Aux. Protection Relays Incl. ( A ) Trip Circuit Supervision Relay, ( B ) Master Trip Relay, ( C ) Sf6 Gas Pressure Low, ( D ) Tcn ( E ) Dcf ( F ) Self Supervision ( G ) Sf 6 Gas Pressure Low. ( Vi ) Metering Equipment Incl. 01 X Digital Voltmeter ( Acc.Cl.0.5 ) , 01 X Digital Ammeter ( Acc.Cl.0.5 ) , 01 X Tri-Vector-Meter ( Acc.Cl.0.5 ) . 01No. Multi-Function-Meter ( Acc.Cl.0.5 ) Shall Be Provided With Lcd Display For Measuring Current, Voltage, Power, Power-Factor And Energy-Parameters, Total Harmonic Distortion And Max. Demand Indication, Same Shall Be Communicable On Modbus Via Rs485 Port ( Vii ) Led Indications - Breaker On / Off / Trip / Spring-Charged, R-Y-B, Disconnector-On / Off / Earth, Dc Available, Ac Supply Fail 15 ( Viii ) 16 Window Annunciator With Hooter To Indicate Following Alarms :- ( A ) Sf6 Gas Pressure Low ( Busbar Compartment ) , ( B ) Sf6 Gas Pressure Low ( Breaker Compartment ) , ( C ) Dc-Fail, ( D ) Master Trip, ( E ) Trip Circuit Failure, ( F ) Inter-Tripping Fault, ( G ) Vacuum Failure ( Current Flowing Even After Cb Open ) , ( H ) Ef & Oc. The Annunciator Will Be Complete With Required Acknowledge / Test Buttons As Required ( Ix ) Control Equipment Incl. 01 X Tnc Switch For Cb On / Off, 01 X Local-Remote Selector Switch, Push-Button For Disconnector On / Off, Mcbs For Ac / Dc Isolation As Required 16 ( X ) Other Accessories Incl. Space Heater With Thermostat For Lv Panel And Cable Chamber, 3-Pin Socket With Switch, Cfl Lamp. ( Xi ) Suitable Terminal Arrangement Along With Light Interface Unit, Patch-Cord And Associated Port For Spliced Connection With External Armoured Fibre-Optic Cable Shall Be Provided For Achieving Pilot-Wire ( Ofc ) Connection ( Line-Differential ) . 17 ( B ) 01 X Bus Coupler 33 Kv Gis Panel ( I ) 33 Kv, 630 Amp, 25 Ka / 3-Sec, Draw-Out Vacuum Circuit Breaker As Per Iec-62271-100With Roll On Floor Type Vacuum Circuit Breaker Having 03Nos. Vacuum Bottles Of Same Make As Of Circuit Breaker And Panel, Motorized Spring Charging Mechanism ( 230Vac ) With Integral Spring Charging Handle For Manual Charging, Associated Push-Buttons, Anti-Pumping Feature, And Associated Shunt Trip / Close Coils ( 110V Dc ) . ( Ii ) Current Transformers 33 Kv 100 / 1-1 Amp, Core1: Class 0.5, 10Va, Core2: Class Ps-X - Set Of 03 Nos Per Breaker ( Iii ) Main Protection Relay Shall Be A Numerical Drawout Ied Relay ( Should Be Gis Manufacturers Own Make ) Communicable On Iec 61850 Goose Platform Over Double / Redundant Rj-45 / Usb / Fo Port And Hsr Complaint With Programmable Min 14 Digital Input, Min 10 Digital Outputs, 11 Front Led , Large Dynamic Display , Microprocessor Based Protection Scheme For Detecting, Indicating And Tripping The Breaker On Various Faults Like ( A ) Over Current+ Earth Fault Protection For Ht / Lt Side. The Relay Shall Have Complete Bay Control Features Incl. Large Lcd Display For Displaying Feeder Sld ( Position Indication ) , Integrated On / Off Control Function, Three Phase Current Measurement, Disturbance Recorder, Event Log And Fault Record With Non-Volatile Memory, Self-Supervision.The Relay Shall Have Sufficient Binary Inputs And Outputs To Receive And Issue External Commands As Listed Separately. However More Di & Do May Be Provided In Order To Fulfill The Scheme Requirement For Scada Compatibilty. 18 The Relay Shall Be Fully Integrated With The Feeder, Internally Capturing Feeder Statuses Incl. Breaker On / Off / Spring.Chrgd, Line-Current, Sf6 Gas Pressure Low ( Busbar Compartment ) , Sf6 Gas Pressure Low ( Breaker Compartment ) , Master Trip, Trip Circuit Failure ( From Tcs Relay ) , Vacuum Failure ( Current Flowing Even After Cb Open ) And Display Locally On A Built-In Back-Lit Lcd Screen As A Single-Line-Diagram With Parameters As Advised ( I ) Manometer In Each Gas Chamber. 19 ( Ii ) Led Indications - Breaker On / Off / Trip / Spring-Charged, R-Y-B, Disconnector-On / Off / Earth, Dc Available ( Iii ) 16-Window Annunciator With Ackn / Test / Reset Push Button And Hooter To Indicate Following Alarms :- ( A ) Sf6 Gas Pressure Low ( Busbar Compartment ) , ( B ) Sf6 Gas Pressure Low ( Breaker Compartment ) , ( C ) Local Master Trip, ( D ) Trip Circuit Failure, ( E ) Vacuum Failure ( Current Flowing Even After Cb Open ) ( Iv ) Control Equipment Incl. 01 X Tnc Switch, Mcbs For Ac / Dc Isolation As Required ( V ) Other Accessories Incl. Space Heater With Thermostat For Lv Panel And Cable Chamber, 3-Pin Socket With Switch, Led Lamp ( Vi ) Soft Ware For Relay And Cable. ( Vii ) Panel Shall Be Offered With Digital Ammeter And Selector Switch ( Viii ) The Connection Between Bus Coupler And Riser Must Be Inside Gas. ( Ix ) Vaccuum Interrupter And Gis Panel Should Be Of Same Make. 20 ( C ) 02 Nos. Outgoing 33Kv, 630A, 25 Ka Vacuum Circuit Breaker Arrangement Having Motorized Spring-Charging ( Aux: 230Vac ) , And Continuous Duty Tripping / Closing ( Aux: 110Vdc ) With Bottom Cable Entry Each Comprising Of ( I ) Current Transformers 33 Kv 100-50 / 1-1 Amp, Core1: Class 0.5, 10Va, Core2: Class Ps-X - Set Of 03Nos. 21 ( Ii ) Main Protection Relay Shall Be A Numerical Drawout Ied Relay ( Line Differential ) Communicable On Iec 61850 Goose Platform Over Double / Redundant Rj-45 / Usb / Fo Port, Microprocessor Based Protection Scheme For Detecting, Indicating And Tripping The Breaker On Various Faults Like ( A ) Line Differential +Over Current+ Earth Fault Protection For Ht / Lt Side. The Relay Shall Have Complete Bay Control Features Incl. Large Lcd Display For Displaying Feeder Sld ( Position Indication ) , Integrated On / Off Control Function, Three Phase Current Measurement, Disturbance Recorder Cycle, Event Log And Fault Record With Non-Volatile Memory, Self-Supervision.The Relay Shall Have Sufficient Binary Inputs And Outputs To Receive And Issue External Commands As Listed Below :- 22 The Relay Shall Be Fully Integrated With The Feeder, Internally Capturing Feeder Statuses Incl. Breaker On / Off / Spring.Chrgd, Line-Current, Sf6 Gas Pressure Low ( Breaker Compartment ) , Master Trip, Trip Circuit Failure ( From Tcs Relay ) , Vacuum Failure ( Current Flowing Even After Cb Open ) And Display Locally On A Built-In Back-Lit Lcd Screen As A Single-Line-Diagram With Parameters As Advised ( Iii ) Metering Equipment Incl. 01 X Digital Ammeter ( Acc.Cl.0.5 ) , 01No. Multi-Function-Meter ( Acc.Cl.0.5 ) Shall Be Provided With Lcd Display For Measuring Current, Voltage, Power, Power-Factor And Energy-Parameters, Total Harmonic Distortion And Max. Demand Indication, Same Shall Be Communicable On Modbus Via Rs485 Port 23 ( Iv ) Led Indications - Breaker On / Off / Trip / Spring-Charged, R-Y-B, Disconnector-On / Off / Earth, Dc Available ( V ) 16-Window Annunciator With Ackn / Test / Reset Push Button And Hooter To Indicate Following Alarms :- ( A ) Sf6 Gas Pressure Low ( Busbar Compartment ) , ( B ) Sf6 Gas Pressure Low ( Breaker Compartment ) , ( C ) Local Master Trip, ( D ) Trip Circuit Failure, ( E ) Ef & Oc ( F ) Dc Fail. ( Vi ) Control Equipment Incl. 01 X Tnc Switch, Mcbs For Ac / Dc Isolation As Required ( Vii ) Line Feeder Shall Have Line Differential Protection Inbuilt In The Relay. Transformer Feeder Shall Have Transformer Differential Protection In Built In Relay. ( Viii ) Each Gas Filled Compartment Shall Have Manometer. ( Ix ) Aux Relay For Wti, Oti, Bucholz Alam & Trip ( Only For Outgoing Transformer Feeder ) ( X ) Self Powered Wirelwss Thermal Sensor To Be Provided On Cable Termination. Sensor Shall Be Supplied With Necesary Software / Hardware To Communicate With Existing Scada System. ( Xi ) Quoted Rate Shall Deemed To Inclusive Of Sitc Of Gis Oem Recommende Touch Proof Termination Kit Suitable For Gis Panel. 24 Dismantilling Of Existing 33 Kv , 1250 Amp Gis Panel ( Abb ) From Nsb-Ii Sub Stn Carefully And Shifting To Shankar Vihar Substation Including Erection, Testing, Commissioning Of The Panel With Existing Gis Panel In All Respect I.E. Cable Termination Kit Supply , Installation, Commissionig , Testing , Calibration Properly With Existing 33 Kv Gis Panel Scheme Wiring Addition Alteration Etc For Smooth Execution And Coupling With The Help Of AbbS Service Team. Complete All As Directed And Specified.Note:- ( I ) All Rates Quoted Shall Be Include The Modification Of All Technical / Software / Relay Configuration To Existing 33 Kv Gis Panel Calibration With Existing System To The Up System And Down Stream Grids For Discrimination Chat / Tripping Against Faults / Over Currents / Earth Faults / Ofc Based Differential Protection Etc. ( Ii ) Rate Quoted Include The Cost Of Necessary Modification To The Existing Floor / Cable Trenches / Civil Work For Installation Of 33 Kv Gis Panel 25 Supply, Installation, Commissioning , Design, Engineering, Manufacture, Inspection, Painting Andtesting Complete With All Accessories Of Transformer Of Capacity 2.5 Mva Step Down, Outdoor Floor Mounted, Double Copper Wound, 3 Phase, 50 Hz, Ac, Including All Standard Acessories As Per Latestis , Oilimmersed, Knan ( Natural Ester ) Confirming To Is-2026, Most Economical Losses External Cooling Tubes / Radiator Cores Type Having No Voltage Ratio 33000 / 11000 Volts, Impedance % Of 6.25 ( Corresponding To Principal Tapping ) Winding Delta Connecting On Primary Side ( Hv Side ) And Star Connected On Secondary Side ( Lv Side ) In Accordance With Vector Symbol Dyn11 ( Vector Group ) With Neutral Brought Out On Lv Side And Looping On Hv Side For Continious Output So As To Alter / Vary Secondary Voltage By ( + ) 5 To ( - ) 15% In 16 Equal Steps Of 1.25% To Be Changed By Means Of ( Oltc ) On Load Tap Changerof Make Ctr / Olg With Local / Remote Opertion Features Along With Rtccpanel With Avr Relayfor Auto / Manual Operation, Cable End Boxwith Rated Copper Bus Bars / Bimatallic Connectors Shall Be Provided For The Transformer On Both Ht And Lt Side For Connecting 33 Kv Ht 3 Core Cable Of Size 185 Sqmm On Ht Side And Single Core Six Runs Of 300 Sqmm 11Kv Ht Cable On Lt Side. Avr Should Be Scada Compatiabilty And Hv / Lv Orientation 180 Degree 26 Transformer Shall Be Of Boltless Core Design. Transformer Shall Be Double Wound, Core Type With Low Loss, Non Ageing, High Permeability Prime Grade, Crgo With M4 Grade Or Better, Perfectly Insulated And Clamped To Minimize Noise And Vibrations, Core Shall Be Purchased Directly From Manufacturer Of Core Or From Their Accredited Marketing Network And Not Through Any Agent. Before Placing Order For Procurement Of Transformer, The Contractor Shall Submit The Credentials In Respect Of The Manufacturer Ofcore And Transformer Shall Be Procured Only After Approval From Ge In Respect Of Name Of Manufacturer Of Transformer As Well As Manufacturer Of Core. The Limit Of Termperature Rise After Continous Full Load Runs As Specified In Is / Iec 60076 Shall Be Suitably Adjusted To Suit The Ambient Temperature Of Maximum 50 Degree Celsius Prevailing At Site All As Specified And Directed Including Having Following Characteristics Complete All As Specified And Directed. 27 The Transformer Shall Confirm To The Latest Edition Of Applicable Standard As Follows :- ( I ) Is-2026, For Tests And Tolerance Of Guarnteed Particulars, ( Ii ) Is-3639 For Fitting And Accessories ( Iii ) Is-2099 For Bushing >1000V ( Iv ) Is-7421 For Bushing <1000V ( V ) Is-1271 For Electrical Insulation Classified By Thermal Stability 28 ( A ) Hv / Lv Winding Electrolytic Copper 99.9% Purity 29 ( B ) Insulation Levelkvp ( I ) Hv-170 ( Ii ) Lv-70 30 ( C ) Insulation Level ( Power Frequency With Stand Kvrms ) ( I ) Hv 75 ( Ii ) Lv-28 31 ( D ) Temperature Raise For The Transformer Should Be 50 / 55 Deg.C ( Oil / Winding Temp ) At Av. Ambient Temperature Of 50C ( E ) Noise Level For Offered Transformer Will Be As Per Nema Tr1 Only ( F ) Over Loading Of The Transformer Should Be Of As Per Is 6600 Only ( G ) Transformer Shall Be Of Class H Insulation ( H ) Primary Painting Of Zinc Phosphate. ( I ) Tank Pressure, Vaccum Witstand Capability & Minimum Clearances Should Be As Per Cbip Manual. ( J ) Neutral Ct 150 / 1 Ps Class To Be Provided 32 % Efficiency At 75Deg C / Unity P.Fa ) At 100% Load-------98.87B ) At 75% Load----------99.07C ) At 50% Load--------99.23% Regulation At Full Loada ) At Unity Pf---------1.19B ) At 0.8 Pf -----------4.60 33 Note: ( I ) Rate Quoted Includes The Cost Of Transformer , Rcc Baffel Wall As Per Electricity Safety Rule From Gl With Proper Earth Work Between The Both Transformers, Rcc Foundation Designed As Per The Oem Recommendation Based On The Soil Conditions Of The Delhi Canttaf Muesuim Site ( Ii ) Rate Quoted Includes The Cost Of Necessary Power / Control Cables For Operation Of Oltc, Prv Limit Switches , Wti , Oti , Double Floatbucholz Relayfrom Rtcc Panel In Side Substation Buildingto Transformer ( Iii ) Transformer Shall Be Brought Site Only After Approval Of Gtp Drawings And Only After Completion Of Installation Of 33Kv Gis Panels And Laying Of 33Kv Cables I.E After Completion Of 50% Of The Work At Siteto Avoid Ideal Laying / Ingress Of Moisture / Corrossionto Transformer At Site Which Detoriates The Life / Warranty And Service Of The Transformer ( Iv ) Testing & Commissioning Of Transformer Shall Be Carried Out In The Presence Of Oem At Site. ( V ) Oem Of Power Transformer Must Have In House Nabl Accredited Lab. 34 Supplying, Installing, Testing And Commissioning Of Indoor Arc Flash Protected Draw-Out With Roll On Floor Type Gis Panel , Rated For 11Kv, 630 Amp, 25Ka / 3-Sec, Comprising Of 02 X Incomming +01 Bus Coupler+01 Bus Raiser+02 Out Going Vcb Panels Confirming To Iec 62271-200, And Is 13118, Accessibility Class Lsc2b-Pm Class, Comprising Of 630 Amp, Continuous Ratedinsulated Copperbusbarsand Droppers In All Bus / Breaker / Adaptor And Cable Chambers , 02 Nos. Rack-In-Rack-Out Handles, Structure Made From Aluzinc / Gi / Powder Coated Crcasheets To Prevent Corrosion And Rusting.The Complete Panel Incl. Ht And Lt Chamber With Frls Wiring And Acessoriesshall Be Manufactured By Approved Oem At Its Own Mancufacturing In House Facility, And Same Will Be Verified Via Stage / Final Inspection. System House Integrator / Channel Partner Products Are Not Accepted .The Offered Panel Shall Be Type Tested For Internal Arc 25 Ka For 1 Sec With Aflr Classification Make Of The Vcb, Panel, Relay And Meters Shall Be Of The Same Make / Oem 35 ( A ) 02 X Incomer Panel, Each Comprising Of :- ( I ) 11Kv, 630Amp, 25Ka / 3-Sec, Draw-Out Vacuum Circuit Breaker As Per Iec-62271-100. Vacuum Circuit Breaker Having 03Nos. Vacuum Bottles Of Same Make As Of Circuit Breaker And Panel, Motorized Spring Charging Mechanism ( 230Vac ) With Integral Spring Charging Handle For Manual Charging, Associated Push-Buttons, Anti-Pumping Feature, And Associated Shunt Trip / Close Coils ( 110Vdc ) . 36 ( Ii ) Current Transformers 11Kv, 300-150 / 1-1-1, Core3: Class 5P10, 5Va, Core2: Class 0.5, 5Va - Set Of 03Nos. ( For Measuring, Relaying And Transformer Differential ) Core 1 :Ps For Ref ( Iii ) Potential Transformer ( Applicable For Incommer As Line Pt ) :Floor Rolled / Cb Trolley Mounted Drawnout Type 11Kv / 110V / 110V, Core 1: 0.5 , 20 Va Core2: 3P 20 Va 04 Pt Must Not Be Panel Top Mounted. 37 ( Iv ) Mainprotection Relay Shall Be Numerical Ied Relay Confirming To Iec60255, Microprocessor Based Protection Scheme For Tripping The Breaker On Various Faults Like ( A ) Over-Current Or Earth-Fault In Any Of The Three Phases, ( B ) Circuit-Breaker-Failure Alarm, 38 ( C ) Interpanel Tripping / Blocking Signals Via Goose Based Peer-To-Peer Communication, On Iec61850 Protocol. ( D ) Integrted Arc Flash Protection With Current And Light Sensingthe Relay Shall Be Communicable On Iec 61850 Goose Platform Over Double / Redundant Rj-45 / Usb / Fo Port, And Fully Integrated With The Feeder, Internally Capturing Feeder Statuses Incl. Various Status, Line-Current, Breaker On / Off / Spring.Chrgd, Trip Circuit Failure ( From Tcs Relay ) , Local-Remote Etc. And Display Locally On A Built-In Back-Lit Lcd Screen With Mimic As A Single-Line-Diagram With Current Measurements And Suitably Labelled Status Leds. ( E ) Over And Under Voltage & Ref Protection Shall Be Given For Outgoing Feederrelay Setting Should Be Possible Through Inbuilt Software Or Through Addtional Software Supplied By The Relay Manufacturer. 39 ( Iv ) Metering Equipment Including:- ( A ) 01 X Digital Voltmeter ( Acc.Cl.0.5 ) , 01 X Digital Ammeter ( Acc.Cl.0.5 ) , ( B ) 01No. Multi-Function-Meter ( Acc.Cl.0.5 ) Shall Be Provided With Lcd Display For Measuring Current, Voltage, Power, Power-Factor And Energy-Parameters, Total Harmonic Distortion And Max. Demand Indication, Same Shall Be Communicable On Modbus Via Rs485 Port. 40 ( V ) Led Indications - ( A ) Breaker On / Off / Trip / Spring-Charged, ( B ) Trip Circuit Healthy 41 ( Vi ) 08-Window Annunciator With Hooter To Indicate Following Alarms :- ( A ) Oc Trip, ( B ) Ef Trip ( C ) Trip Circuit Failure, ( D ) Inter-Tripping Fault, The Annunciator Will Be Complete With Required Acknowledge / Test Buttons As Required 42 ( Vii ) All Multi-Function-Meters Shall Be Connected In A Modbus Loop Terminating Into 01 No. Modbus-To-Tcp / Ip Converter To Be Provided For Sending Data To Scada Console Via Networking Switch. 43 ( Viii ) Control Equipment Incl. ( A ) 01 X Tnc Switch, ( B ) 01 X Emergency Trip Push Button, ( C ) 01 X Local / Remote Switch, ( D ) Mcbs For Ac / Dc Isolation ( E ) Heater Switch With Thermostat - 01No. ( F ) 3-Pin Socket With On / Off Switch - 01No. ( G ) Led Lamp With On / Off Switch - 01No. 44 ( Ix ) Flush Mounted Auxillary Protection Relays Incl. ( A ) Trip Circuit Supervision Relay, ( B ) Master Trip Relay, 45 ( B ) 01 X Bus Coupler Panel With Raiser, Each Comprising Of :- ( I ) 11Kv, 630 Amp, 25Ka / 3-Sec, Draw-Out Vacuum Circuit Breaker As Per Iec-62271-100With Roll On Floor Type Vacuum Circuit Breaker Having 03Nos. Vacuum Bottles Of Same Make As Of Circuit Breaker And Panel, Motorized Spring Charging Mechanism ( 230Vac ) With Integral Spring Charging Handle For Manual Charging, Associated Push-Buttons, Anti-Pumping Feature, And Associated Shunt Trip / Close Coils ( 110V Dc ) . 46 ( Ii ) Current Transformers 11Kv, 300-150 / 1-1-1, Core3: Class 5P10, 5Va, Core2: Class 0.5, 5Va - Set Of 03Nos. ( For Measuring, Relaying And Transformer Differential ) Core 1 :Ps For Ref 47 ( Iii ) Main Protection Relay Shall Be Numerical Ied Relay Confirming To Iec60255, Having 04Pt Inputs With Microprocessor Based Protection Scheme For Tripping The Breaker On Various Faults Like ( A ) Synchronism And Energizing Check Before Bus-Coupler Closing To Prevent Un-Syncronized Mixing Of Supplies ( B ) Circuit-Breaker-Failure Alarm. ( C ) Circuit-Breaker-Failures And Interpanel Tripping / Blocking Signals Via Goose Based Peer-To-Peer Communication, On Iec61850 Protocol. The Relay Shall Be Fully Integrated With The Feeder, Internally Capturing Feeder Statuses Incl. Various Status, Bus-Voltage And Display The Same Locally On A Built-In Back-Lit Lcd Screen With Mimic As A Single-Line-Diagram With Power & Frequency Measurements And Suitably Labelled Status Leds.Relay Setting Should Be Possible Through Inbuilt Software Or Through Addtional Software Supplied By The Relay Manufacturer. 48 ( Iv ) Led Indications - ( A ) Breaker On / Off / Trip / Spring-Charged ( B ) Trip Circuit Healthy 49 ( V ) Control Equipment Incl. :- ( A ) 01 X Tnc Switch, ( B ) 01 X Local / Remote Switch, ( C ) 01 X Emergency Trip Push Button, ( D ) Mcbs For Ac ( E ) Mcbs For Dc ( F ) Heater Switch With Thermostat - 01 No. ( G ) 3-Pin Socket With On / Off Switch - 01 No. ( H ) Led Lamp With On / Off Switch - 01 No. 50 ( Vi ) Flush Mounted Auxillary Protection Relays Incl. ( A ) Trip Circuit Supervision Relay, ( B ) Master Trip Relay, 51 ( Vii ) 08-Window Annunciator With Hooter To Indicate Following Alarms :- ( A ) Trip Circuit Failure, ( B ) Inter-Tripping Fault, ( C ) Synchro-Check. ( D ) Pt Fuse Failurethe Annunciator Will Be Complete With Required Acknowledge / Test Buttons As Required 52 ( C ) 02 X Outgoing Panel, Each Comprising Of :- ( I ) 11Kv, 630Amp, 25Ka / 3-Sec, Draw-Out Vacuum Circuit Breaker As Per Iec-62271-100. Vacuum Circuit Breaker Having 03Nos. Vacuum Bottles Of Same Make As Of Circuit Breaker And Panel, Motorized Spring Charging Mechanism ( 230Vac ) With Integral Spring Charging Handle For Manual Charging, Associated Push-Buttons, Anti-Pumping Feature, And Associated Shunt Trip / Close Coils ( 110 V Dc ) . 53 ( Ii ) Current Transformers 11Kv, 300-150 / 1-1-1, Core3: Class 5P10, 5Va, Core2: Class 0.5, 5Va - Set Of 03Nos. ( For Measuring, Relaying And Transformer Differential ) Core 1 :Ps For Ref 54 ( Iii ) Main Protection Relay Shall Be Numerical Ied Relay Confirming To Iec60255, Having 04Ct Inputs With Microprocessor Based Protection Scheme For Tripping The Breaker On Various Faults Like ( A ) Over-Current Or Earth-Fault In Any Of The Three Phases, ( B ) Circuit-Breaker-Failure Alarm, ( C ) Interpanel Tripping / Blocking Signals Via Goose Based Peer-To-Peer Communication, On Iec61850 Protocol. ( D ) Integrted Arc Flash Protection With Current And Light Sensing. ( E ) Tranformer Protection ( Marshalling Box And Buchhloz Relay ) .The Relay Shall Be Communicable On Iec 61850 Goose Platform Over Rj-45 / Usb / Fo Port, And Fully Integrated With The Feeder, Internally Capturing Feeder Statuses Incl. Various Status, Line-Current, Breaker On / Off / Spring.Chrgd, Trip Circuit Failure ( From Tcs Relay ) , Local-Remote Etc. And Display Locally On A Built-In Back-Lit Lcd Screen With Mimic As A Single-Line-Diagram With Current Measurements And Suitably Labelled Status Leds.Relay Setting Should Be Possible Through Inbuilt Software Or Through Addtional Software Supplied By The Relay Manufacturer. 55 ( Iv ) Metering Equipment Including:- ( A ) 01 X Digital Voltmeter ( Acc.Cl.0.5 ) , 01 X Digital Ammeter ( Acc.Cl.0.5 ) , ( B ) 01No. Multi-Function-Meter ( Acc.Cl.0.5 ) Shall Be Provided With Lcd Display For Measuring Current, Voltage, Power, Power-Factor And Energy-Parameters, Total Harmonic Distortion And Max. Demand Indication, Same Shall Be Communicable On Modbus Via Rs485 Port. 56 ( V ) Led Indications - ( A ) Breaker On / Off / Trip / Spring-Charged, ( B ) Trip Circuit Healthy 57 ( Vi ) 08-Window Annunciator With Hooter To Indicate Following Alarms :- ( A ) Oc Trip, ( B ) Ef Trip ( C ) Trip Circuit Failure, ( D ) Inter-Tripping Fault, The Annunciator Will Be Complete With Required Acknowledge / Test Buttons As Required 58 ( Vii ) Control Equipment Incl. ( A ) 01 X Tnc Switch, ( B ) 01 X Emergency Trip Push Button, ( C ) 01 X Local / Remote Switch, ( D ) Mcbs For Ac / Dc Isolation ( E ) Heater Switch With Thermostat - 01No. ( F ) 3-Pin Socket With On / Off Switch - 01No. ( G ) Ledlamp With On / Off Switch - 01No. 59 ( Viii ) Flush Mounted Auxillary Protection Relays Incl. ( A ) Trip Circuit Supervision Relay, ( B ) Master Trip Relay, 60 Note For Item 08 ( I ) Cost Of Construction Of Foundation As Per Manufacturer Design, Including Foundation Frame ( Supplied By Oem ) , Channels Etc. For Ht Panel As Required At Site Are Deemed To Be Included In The Quoted Rate. ( Ii ) Each Vcb Panel Being Floor-Mounted, Air-Insulated, Fully-Compartmentalizeds The Oem Shall Supervise And Certify The Commissioning / Charging Of Equipment. ( Iii ) Foundation Frames Shall Be Inclusive In The Scope Of Supply Of Oem. 61 ( Iv ) All Multi-Function-Meters Shall Be Connected In A Modbus Loop Terminating Into 01 No. Modbus-To-Tcp / Ip Converter To Be Provided For Sending Data To Scada Console Via Networking Switch. 62 ( V ) Necessary Cat 6 And Modbus Cabling From Panel To Rtu Panel Shall Be Provided By The Contractor With In This Scope Only. 63 ( Vii ) All Incomers And Buscouplers Will Have Suitable Schemes In Place To Prevent Mixing Of Un-Syncronized Supplies Using Line / Buspt Signals. Any Such Attempt Will Be Reported By A Suitable Alarm. This Facility Should Be Implemented Over Soft-Logic, And Can Be Disabled By Authorized Personnel Without Requiring Any On-Site Re-Wiring. ( Viii ) All Outgoing Vcbs Will Have Inter-Tripping Logic In Place To Ensure That Incomer Breaker Immediately Trips In Case Of Failure Of Opening Of Outgoing Vcb Experiencing Feeder Fault. Special And Dedicated Alarm Shall Be In Place To Issued The User. This Facility Should Be Implemented Over Soft-Logic, And Can Be Disabled By Authorized Personnel Without Requiring Any On-Site Re-Wiring. ( Ix ) Self Powered Wirelwss Thermal Sensor To Be Provided On Cable Termination. Sensor Shall Be Supplied With Necesary Software / Hardware To Communicate With Existing Scada System. 64 Supply Laying Jointing Commissioning And Testing Of Xlpe Insulated Screened, Pvc Bedded, Galvanized Steel Strip / Wire Armoured Electric Power Cable Frls Pvc Sheated ( Heavy Duty ) With Multistranded Aluminum Conductors 300 Sqmm Single Core 11 Kv ( E ) Grade With Stranded Aluminium Conductor Complete Laid In Cableducts / Trays / Trenches / Encased In Gi Pipes / Rcc / Dwc / Hdpe Pipes Complete All As Specified And Directed. 65 S&F Cable End Jointing Kit For 11 Kv Grade Cable For Indoor Type Termination Heat Shrinkable Joint Complete With Jointing Material And Accessoies Suitable For Single Core Xlpe Armoured Aluminium Conductor Cable Of Size 300 Sqmm Complete All As Specified And Directed. 66 M&L For Boring Of Holes On Any Type Of Soil Of Size 250 Mm Dia, Under Road / Pavement / Hardstanding By Trenchless Technology Using Ultra Sound Technique And Necessary Machine Including Material And Labour For Hdpe Pipe Of 200 Mm Dia Suitable For 04 Kg / Sqcm Working Pressure, Wall Thickness Of Pipe Not Less Than 6.5 Mm For 33 Kv Cable Complete All As Specified And Directed. 67 Note: For Item No 11 ( I ) The Contractor Will Be Responsible For Taking Permission From Appropriate Authority I.E. Nhai / Igl Or Other Units , If Needed, For Above Said Work. ( Ii ) Depth Of Trench Less Shall Not Less Than 2 Mtr From Ground Level Unless Other Wise Specifed Due To Site Requirement And Contractor Has To Maintain The Depth Of Trenchless Up To 4 Mts From Ground Level If Required As Per Site Conditionsall Rates Quoted Shall Be Demeed To Be Included To Maintain The Trench Less Depts As Directed During Exection To Avoid Damages To The Existing Services ( Iii ) The Cost Quoted Is Deemed To Be Inculded For Repiars / Rectification For Damages Done To The Existing Elecrtical / Comminication And Water Supply System / Sewage Systemduring Execution Of Work ( Iv ) Hdpe Pipe 40 Mm Dia ( Item No 43 Below ) Is Also Passing Along With 200 Mm Dia Hdpe Pipe Through Same Bore. ( V ) No Extra Cost To Be Paid For Passing Of Hdpe Pipe. 68 M&L For Excavation In Trenches, N Exc 1.5M Wide And N. Exc 1.5 M In Depth And Getting Outfor Laying Of Htcable / Ofc / Grid Mating Etc Exc 10 Sq M On Plan And Getting Out Complete All As Specified And Directed. 69 All As Per Item No 12 ( Here-In-Before ) But In Hard Rocks. 70 S&F Gi Pipe ( Light Grade ) With Necessary Accessories / Fittings For Cable Protections / Pole For Crossing Of Culverts / Nallah / Of Size 200 Mm Dia Complete All As Specified And Directed. 71 M&L For Returing / Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Soft / Loose Soil Complete All As Specified And Directed. 72 M&L For Removing Of Excavated Material N Exc. 50M And Depostiting Where Directed At A Level N Exc. 1.5M In Soils Complete All As Specified And Directed. 73 M & L Forsand Cushioning To Underground Pvc Cable Inclpunning Down Of Sand Layer All As Specified And Directed. Note :- For Measurement Purpose Only Punned Sand Shall Be Measured & Paid. 74 Supply & Laying Reinforced Precast Concrete Cable Cover Class Ehv Type 1 With Peak Size 450 Mm X230mmx50mm In Trenches For Protection To Under Ground Cable Complete All As Specified And Directed 75 Supply & Laying Un- Reinforced Precast Concrete Cable Cover Class Hvp Type 1 With Peak Size 300 Mm X180mmx40mm In Trenches For Protection To Under Ground Cable Complete All As Specified And Directed 76 S&F Screw Bolts ( Machine Made ) With Hexagonal Or Square Heads At One End And Screwed The Other Each Screw To Be Fitted With One Washers And One Hexagonal Or Square Nut Length Of Bolts N.Exc 5Cm And Dia Of Shank 10Mm All As Specified And Directed. 77 M&L For Cement Concrete 1:3:6 Type C-2 ( Using20mm Graded Crushed Stone Aggregate ) As In Foundation Filling And Mass Concreteas In Channel / Drains Complete All Asspecified & Directed. 78 Excavation In Post Holes N.Exc 0.5 Cum Each Getting Out, Returning Filling In And Ramming Earth In Layers N.Exc 25Cm Watering And Removing Surplus Soil To A Distance N.Exc 50M And Making Good Surface In Soft / Loose Soil Complete All As Specified And Directed. 79 S&F Galvanised 2 Strand, Steel Barbed Wire 2.24Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacings And Straining And Fixing To Any Type Of Standard Rails, Straining Bolts, Including Securingor Tying At Crossings With And Provision Of Galvanised Mild Steel Wire, Staples Or Steel Pins Etc Etc As Directed ( Each Line Wire To Be Measured ) Incl Taking Down Old Wire Etc Complete All As Specified And Directed 80 Supply Only Chain Link Ms Galvanised Fencing, Any Size Or Type Etc Complete All As Specified And Directed. 81 Fixing Only Chain Link Fencing Including Line Wires, Any Mesh , Size And Type To Any Type Of Standards , Rails , Straining Bolts, Etc. Including Provision Of Binding Wire Complete All As Specified And Directed. 82 M&L For Two Coats Of Synthetic Enamel Paint Over A Coat Of Primer Incl Preparation Of New Steel Surfaces Of Any Description Over 10Cm Girth Or Width Complete All As Specified And Directed. 83 S&F In Ms Work Such As In Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.Flat Iron Fillets ( For Securing Wire Mesh Etc. ) Including All Necessary Drilling, Bolting Or Riveting, Etc And Similar Work Conforming To Fe 290 Gde E-165 All As Specified And Directed. 84 S&F 12Mm Dia Round Tmt Bars As In Fencing, Cut To Length Fixing With Posts / Fencing, Bindingsecuring With Clips Etc All As Specified And Directed 85 M&L For Preparation Of New Steel Surfaces Not.Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Overa Coat Of Red Oxide Primer, Complete All As Specified And Directed. 86 Supply And Fix Cable Route Indicator Made Of Rcc ( Nominal Mix ) Type Bo 1:2:4 ( 12.5 Mm Graded Stone Aggregate ) With 8 Mm Tmt Bar 1.5 M Height X 60 Cm Wide X 10 Mm Thick Tapered On Top Visible Above Ground Duly Painted With Synthetic Enamel Paint Of Yellow Colour Base And Letters With Black Paint. The Description For Writing For Ht Cable 33000 Volts Will Be Given By Engr-In-Charge Complete All As Specified And Directed. 87 M&L For Danger Notice Board Of 1.6 Mm Thick Mild Steel, Vitreous Enamelled White With Letters, Figures And Conventional Skull And Bones In Signal Red Colour And Fixed With Ms Clamps, Bolts And Nuts Of Approved Size For Ht 25 X 20 Cm Size Complete All As Specified Anddirected. 88 M&L For Erection Of Steel Tubular Swan Neck Pole For Security Lights , Type 410-Sp-31, 9.0 Mtr Long Painted With Two Coats Of Synthetic Aluminium Enamel Paint Over A Coat Of Red-Oxide Primer, Making 03 Nos Radium Strip On Pole Of Size 150Mm Height From Gl To Pole Height 1.0 Mtr Complete All As Specified And As Directed ( Note:- Excavation, Pcc Work Shall Be Measured And Paid Separately ) 89 M&L For Complete Fixing Ofenergy Efficientled Street Lights Fittings Of 90 Watt Capacity , 220 Volt , 50 Hz, Ip 65 / 66Pole Mountedincluding Pole Box And Connecting Wire Of 1.5 Sqmm 3 Core From Pole Box To Fitting All As Specified And Directed. 90 M&L For Pcc In Foundation Filling And Mass Concrete Type C2 ( 1:3:6 ) Using 40 Mm Graded Aggregate Complete All As Specified And Directed 91 M& L For Pcc Type B1 ( 1:2:4 ) Using 20 Mm Graded Stone Aggregate For Pole Coping Complete All As Specified And Directed 92 M&L For Bore Earthing In Hard Rock Of 150 Mm Dia, Depth 30 Mtr Below Ground Level Using Earth Electrode 50 Mm Dia Gi Pipe Medium Grade Duly Drilled Hole Of 12 Mm Dia 115 Cm C / C On Both Side Of The Pipe Including Lowering In Bore Well Upto The Depth Of 29 Mtr And One Mtr Above The Ground Level The Pipe Electrode Should Be Filled Around Commercial Salt Charcoal Dust / Breeze And Magnesium Phosphate Of 30 Cm Layer Each Upto The Fiull Length Of Pipe. The Bore Well Should Have 06 Mtr Of Length 150Mm Dia Ms Pipe For Protection Of Bore Well Welding Of Gi Strip 50 X 6 Mm On Earth Electrod Gi Pipe 50 Mm Dia Upto The 20 Mtr Below Ground Level 15 Mtr From The Bore Well To Test Point. Necessary Water Connection By Gi Steel Tubing Light Grade10 Mm Dia Complete All As Directed By Engineer-In-Charge. Note :- Gi Strip More Than 30 Mtr Will Be Measured And Paid Separetely. 93 M&Lfor Laying , Fixing Of Gi Strip 50 X 6 Mm With Saddle And Fixing Screw Etc Complete All As Specified And Directed. 94 M&L For Earthingwith Copper Plate Electrode 600X600x3.15 Mm Thick Buried Directly In Ground ( Earth Pit Not Less Than 2.25 M Deep Below Normal Ground Level ) With Top Edge Of The Plate Not Less Than 1.5 M Below Normal Ground Level Connected To Copper Earth Strip 20X3mm ( Up To 7.5 M In Length From Earth Plate ) By Means Of Bolts And Nuts Checknuts And Washers Of Galvanized Iron Electric Arc Welding All Joints All As Specified And Shown In Electrical Plate No 3 Of Ssr Part I Including Necessary Excavation And Earth Work In Any Type Of Soil Pcc 1:3:6 Type C1 Chamber With Pcc 1:2:4 Type B1 40 Mm Thick Cover With Ms Rod 8Mm Dia 150Mm Long Reinforcement, Watering Funnel, 40 Mm Dia Medium Grade For Protection Of Earth Electrode 20 Mm Dia For Watering Complete All As Specified And Directed And Tested On Completion Complete All As Specified And Directed. 95 M&L For Copper Strip 20 X 3 Mm With Saddle And Fixing Screw Etc Complete All As Specified And Directed. 96 M&L For Gravel Filling Of Size N.Exc 40 Mm, Deposited Spread And Levelled In Layers N.Exc 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And Directed. 97 S &F Fire Retardant / Extinguishing Electric Insulated Synthetic Mat Insulatica - 2000 Of 3.0Mm Thick + 10% Confirming To Bis : Doc No Et-02 ( 5440 ) Dated 30 Apr 2004, Meeting Requirement Of Is-3043, Is-5216 ( Part -I, Ii &Ii ) , Is-8437 And Iec-479 Pub-I, Tested For Breakdiwn Strength, Tensile / Elongation Ageing Properties, Insulation Resistance , Effect Of Acid, Alkaline, Diesel And Transformer Oil Leakage Current Test, Fire Test Etc, Having Minimumwidth Of 1000Mm + 20Mm Including All Allied Materials Such As Pu-Resin, Chemical Bound ( Haedener ) Special Pvc Adhesive Liquid Primer Etc Of Required Quantity To Complete The Job As Per Site Requirement Of All Voltages Not Exceeding 33 Kv System Without Ht Trolley Movement. Of Size 2 X 1 Mtr Complete All As Specified And Directed. 98 Supply, Laying, Jointing And Testing Of Armoured Optical Fibre Underground Cable, 12 Core ( Fiber ) Along With Light Interfacing Unit Laid In Trenches / Ducts / Fixed On Poles / Walls, Laid Under / Path Or Encased In Hdpe Pipe Complete All As Specified And Directed. Note : The Cost Of Joints / Splicing Deemed To Included In The Quoted Rate. 99 M&L High Density Polyethylene Pipes ( Duct For Ofc ) Of Size 40 Mm Dia ( Hdpe ) Ofpressure Rating 10 Kg / Cm2 Laid In Trenches / Bore Holes Of Road Crossing / Hard Standing For Laying Of Ofc Complete All As Specified And Directed.. 100 M&L For Splicing Work Of Optical Fibre Cable Of 6 / 12 Core Forend Connection At Fibre Optic Distribution Box Complete All As Directed. 101 S&F Patch Cords Having Any Type Of Connectors ( Sc / Lc / St / Fc ) At Both Ends As Per Site Requirement Complete All As Directed. 102 S&F Ofc 12 Liu Port Complete All As Directed. 103 Supply Installation & Commissioning Of 110V / 30A Scr Controlled Float Cum Boost Battery Charger Unit Including Battery Bank Comprising 2 Volts / 100 Ah Cells - 55 Nos Sealed Maintenance Free Battery.The Cccv Battery Charger Consisting Of Copper Wound, Air Cooled Transformer, 01 Set Single Phase Full Wave Bridge Rectifier Consisting Of Diodes And Scrs, Liberally Rated Mounted On Heat Sink And Complete With Resistor / Condenser Network For Surge Suppression.During Auto Float Mode Automatic Changeover Shall Take Place From Float Mode To Boost Mode And Vice Versa, 01 Set Of Solid State Constant Potential Controller To Stabilize The Dc Output Voltage Of The Float Cum Boost Charger, 01 No Electronic Controller, Dcdigital Ammeter, Dc Digitalvoltmeter, Potentiometer, Dc, Mcb For Reverse Battery Protection. The Charger Should Have Alarm Annunciation With Visual And Audible Alarm With Manual Reset Facility For Fuse Fail Alarm. Float Cum Boost Battery Charger And Dc Distribution Board Shall Be Housed In Powder Coated Sheet Steel Cubicle With Panels Of 1.6Mm Thickness, Louvers For Ventilation, Gland Plate Will Be Provided For Cable Entry From Bottom. The Battery Charger Shall Be Divided Into Two Compartments.The Upper Compartment Shall House The Battery Charger & Dcdb With All Necessary Controls. The Lower Compartment Shall Be Suitable For Housing The Batteries. Tech Specification Shall Be As Under:- 104 ( A ) Input Working Voltage-180 -270 Volts ( B ) Nominal Input Voltage - 230 V , Ac , 50 Hz, 1 ( C ) On Load Input Power Factor- > 0.8 ( D ) On Load Unit Watt Efficiencies-> 80% ( E ) No Load Losses Of Complete Charge-< 10% ( F ) Ripple Contents On The Load ( Rms ) = 1% To 5% ( G ) Overload - 110% For 30 Minutes And Will Give Visual Indication For Over Load Condition. ( H ) Boost Charging - 2.4 V / Cell. ( J ) Float Charging -2.15 V / Cell ( K ) Float Cum Boost Charging-Automatically Changes From One State To Another State As Per Battery Condition And Wiil Give The Visual Indication For Either Float Or Boost Based On Charging Mode. ( L ) Reverse Polarity -No Damage Will Be Caused.A Visual Indication For Reverse Polarity Will Appear With An Audio Alarm. ( M ) Short Circuit-Mcb Protection Provided. 105 Supply, Installation Of Required Equipments At Airforce Muesum, Palam Substation For Hooking Up 33Kv & 11Kv Switchgears To Shankar Vihar Ids Subattion Scada And Integartion Subsequently.Tentetive Equipments Shall Be As Follows But Not Limited To:A. 1 Nos. Serial To Tcp Converter, Rj11 / Rj45 To Serial Converter For Multifunction Meter Accessb. 1 Nos. Relay Networking Ethernet Switches: ( Loose Supply ) To Be Mounted Inside The 33Kv Or 11Kv Switchgear Panel Managed Fast / Gigabit Ethernet 19’ Switch -Each 20 Fast Ethernet Ports, With Single Aux. Supply.C. 1 Nos. Iec 61850 Compliant I / O Units For Acquisition Of Substation Miscellaneous Signals From Battery Charger, Ups Etc. – I / O Capability Up To 24 I / Od. Equipment For Rtcc Control Supported Over Modbus Control Along With Tcp Converter ( If Required ) E. Cat 6 Cable For Relay Networking Upto Ethernet Switches Forsubstation As Required.F. Ofc Cable And Its Termination From Liu To Ethernet Switch G. Intergartion Of Complete 33Kv & 11Kv Switchgear And Other Substation Equipments At Shankar Vihar Ids Substation Scada. 106 Supply And Installation Of Co2 Portable Type Fire Extinguisher Isi Marked Confirming To Is:15683 Of Capacity 4.5 Kg Complete With Delivery House Horn, Squeeze Grip Release Valve, Locking Arrangement, Operational Manaul, Braket With Screws And Sleeves Complete All As Specified And Directed. 107 Supply And Installation Of Co2 Wheel Mountedtype Fire Extinguisher Isi Marked Confirming To Is:2878 :2004Of Capacity 9 Kg Complete With Delivery House Horn, Squeeze Grip Release Valve, Locking Arrangement, Operational Manual, Braket With Screws And Sleeves Complete All As Specified And Directed.
Contract Date: Aug 30, 2023 Contract Value : ₹ 4.53 Crore
Statutory Bodies & Commissions/Committees No of Bidders 9
Delhi View Result →
47.
Defence #1774202 AOC
Tender For Repair / Maintenance Of External Electrical Infrastructure And Connected Items In Domestic And Technical Area Including Lca Area-2 M&L for removing of 160 Watt flame proof lights along with hanging iron rods fixed in sun shelters by disconnecting the electric cable connections and re-fixing in same sunshelter but, other locations by necessary fixing arrangements like welding/clamp/nut bolt etc duly connecting with electric supply and testing complete all as specified and directed by the Engineer-In- Charge. (Total Sunshelters - 06 Nos) 3 Note for item No 2 :- The following items are deemed to be inclusive of quoted rate :- 4 (a)The above job shall be carried out by a trained electricians only 5 (b)The rate quoted for shifting of all lights in one Sun shelter shall be considered as on Job. Each sunshelters provided with 16 Nos flame proof lights 6 (c) Each sun shelters have approx. height of 10 meter and the ceiling of each sun shelters have provided with anti- bird net. For removal of lights, anti- bird net may be removed and kept without any damagefor re-fix after the fixing of lights. The contractor has to consider the above aspects while quoting the rate. The quoted rate shall deemed to be inclusive for removing and re-fixing of the anti- bird net if necessary and nothing extra shall be admissible on this account. 7 (d) Necessary T&P, Safety Belt, Vehicle, Aluminium Ladder, cranes etc. shall be arranged by the Contractor and Cost for the same shall deem to be included in the Quoted Unit Rate 8 (e)All safety measures and provn of all safety devices, first aid box etc shall be provided by the contractor.Contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. Unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 9 (f)All type of T & P, PVC insulation tapes, minor nuts/ bolts/ washers etc required shall be provided by the contractor without any extra cost to department. 10 (g)Additional cables required if any shall be measured and paid seperately under relevent item here in after. 11 Supply onlyPVC insulated Copper Conductor Cable 1.5 Sqmm, single Core Round flame proof Flexible cable for connection of flame proof lights, complete all as specified and as directed. 12 M&L for periodical servicing / maintenance of 150 Watt High bay lights fixed in Hangars on quarterly basis including checking of loose connections tightening of loose nut bolts if any and cleaning and testing complete all as specified and directed by the Engineer-In- Charge.(Total Hangers - 05 Nos) 13 Note for item No 12 :- The following items are deemed to be inclusive of quoted rate :- 14 (a)The above job shall be carried out by a trained electricians only 15 (b)The rate quoted for servicing of all lights in one Hangers shall be considered as on Job. The payment shall be made on quarterly basisonly after testing of all lights in each sun shelter satisfactorily by the Engr-in-charge. 16 (c) Each sun hangers have approx. height of 12 meter and the ceiling of each hangers have provided with anti- bird net. For the servicing of the lights, the anti- bird net may be removed and kept without any damagefor re-fix after the fixing of lights. The contractor has to consider the above aspects while quoting the rate. The quoted rate shall deemed to be inclusive for removing and re-fixing of the anti- bird net if necessary and nothing extra shall be admissible on this account. 17 (d) Necessary T&P, Safety Belt, Vehicle, Aluminium Ladder, cranes etc. shall be arranged by the Contractor and Cost for the same shall deem to be included in the Quoted Unit Rate 18 (e)All safety measures and provn of all safety devices, first aid box etc shall be provided by the contractor.Contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. Unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 19 (f)All type of T & P, PVC insulation tapes, minor nuts/ bolts/ washers and cables etc required for maintaining the services shall be provided by the contractor without any extra cost to department. 20 M & L for disconnecting of burnt/ damaged cables from panels/ junction boxes etc, cutting out the burnt out ends, making new end joints by supply and fixing new aluminium lugs/ insulation tapes etc and reconnecting using new nuts/ bolts/ washer etc and restoring three phase and neutral in the junction box complete all as directed for the 25/ 35 sqmm 3.5 core size of LT underground armoured cablescomplete all as specified and directed. 21 Note for item No 20 :- Earth work required for extending the incoming/ outgoing cable in junction box/ panel board etc shall be deemed to be included in the unit rate quoted. 22 S & F GI tubing 40/50 mm bore light grade 1.2 mtr long bent to shape as required with clamps for fixing of street light on poles/ walls including nuts, bolts, washers clamps of suitable size including taking down existing onecomplete all as specified and directed. 23 S & F Singlepole MCB 6 to 32 Amps, 240 v, 50 Hz ACsuitable for ‘C’ curve, 10 KA breaking capacity conforming to IS 8828 of 1996including taking down existing one complete all as specified and directed. 24 Supply and fixing in repairs LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. 25 Supply and fixing in repairsTPN, MCB 40 to 63 amp, 240 v, 50 Hz ACsuitable for ‘C’ curve, 10 KA breaking capacitycomplete conforming to IS 8828 of 1996 completeall as specified and directed 26 Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for laying of cable and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out completeall as specified and directed 27 Riddling Sand obtained from excavation for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming complete all as per specified and as directed. . 28 Note for item No 27 :- In case sufficient sand not obtained from excavation, the rate is deemed to be inclusive for additional qty of sand requiredto be obtain from outside MD land as directed by the Engineer-in-Charge 29 Removing excavated materials not exceeding 50m distance and depositing where directed at level not exceeding 1.5 m above the starting point complete all as per specified and as directed. 30 S&F Fly ash bricks using modular bricks as in cable protection cover including taking down existing bricks of any size complete all as per specified and as directed. 31 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed. 32 S&F XLPEinsulated, screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100Volts grade cross sectional area 25 Sqmm 3.5 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc complete all as specified and directed. 33 Note for item No 32 :- Excavation and earth work shall be measured and paid separately. 34 S & F Cable jointing kit for 1.1 KV grade cable for outdoor straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 10 sqmm to 16 sqmm complete all as specified and directed. 35 M & L for cutting existing road/PCC/Drain for laying of DI/GI or any type of pipe including necessary earthwork, excavation exc 600mm depth but not exc 1mtr depth, wide 800mm including making existing surface with PCC 1:2:4 type B1 using 20mm aggregate thickness of concrete is 150mmcomplete all as specified and directed. 36 Note for item No 35 :-The tenderer shall take into consideration for following points while quoting his rate for this item andthe unite rate is deemed be included for :- 37 (i) Earth work excavation in any type of soil 38 (ii) Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and as directed. 39 (iii) Removing excavated material to out side MD land 40 (iv)Laying of any type/any bore of pipe in trenches including taking down any description. Supply of pipe will be measured and paid separately 41 (v)150 mm thickPCC 1:2:4 type B1 as inany type of road 42 (vi) GI pipe requiredfor cable protection shall be measured and paid separately under respective item. But labour required for take the cable through GI pipe and laying in trench shall deemed to beincluded in the rate quoted. 43 Supply only GI pipe 50 mm bore medium grade for cable protection completeall as specified and as directed by Engr-in-Charge. 44 M & L for disconnecting of burnt/ damaged cables from panels/ junction boxes etc, cutting out the burnt out ends, making new end joints by supply and fixing new aluminium lugs/ insulation tapes etc and reconnecting using new nuts/ bolts/ washer etc and restoring three phase and neutral in the junction box complete all as directed for the 10/16 sqmm 4 core size of LT underground armoured cablescomplete all as specified and directed.. 45 Note for item No 44 :- Earth work required for extending the incoming/ outgoing cable in junction box/ panel board etc shall be deemed to be included in the unit rate quoted. 46 M & L for cleaning vegetation around the LT pole completely root out from soil and clean the surface onemtr around the pole of street lights complete all as specified and as directed. 47 Note for item No 46 :- Removing of accumulated earth depth upto 15cm cleaning / Cutting the grass with hand operated petrol/ kerosene driven grass cutting machine andremoving thegrass waste to outside MD land is deemed to be included in quoted rate. 48 S&F Powercontactors 40 Amps, 4 pole,415V, including taking down old item complete all as specified and as directed. Make : Cat No 412553 of Legrand or equivalent of L&T/ Siemans 49 M & L for preparing surfaces by removing exisiting faded sky blue and white straps on PCC poles and applying a coat of sky blue/white straps painting with synthentic enamel paint, eachsky blue/white straps of 30 cm height up to 1.5 mtr from top of PCC coating, writing pole no with white paint on black base of PCC pole by sentensile measure includingapplaying one coat of synthetic enamel paint to clamps/cross arm/street light GI bracket fixed on pole complete all as specified and as directed 50 Supply & fix in repair PVC insulated Copper Conductor Cable 1.5 Sqmm, 3 Core Round Flexible for connection of Street Light Fitting, complete all as specified and as directed. 51 M&L Sub main wiring for circuit complete with 2 runs of 1.5 sqmm single core PVC insulated, unsheathed FRLS1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable size non-metallic PVC Conduit and accessories complete fixed surface to wall/roof/ceiling etc and 1 run of 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductoretc including taking down existing sub main wiring complete all as specified and directed. 52 Note for item No 51 :- (a) Two runs of 1.5 sqmmpower cable , one run of 1.5 sqmm earth conductor and one run of PVC conduit/casing capping will be measured as one length. 53 (b)Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. 54 M & L for removing steel swagedtubular pole 8.5/9 mtr long for providing suitable new bracket for fixingstreet lightand re-fixing the poleincluding necessary PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) for foundation of 50 x 50 x 45 cm and coping with 1:2:4, type B1 (using 20 mm graded stone aggregate) complete all as specifiedand directed by Engr-in-chrage 55 S&F in repairs Connector suitable for fixing of Cable of size Cross sectional area 10 Sqmm to 25 Sqmm armoured/PVC for preventing of Short Circuiting of Cable in Junction Boxes, complete all as specified and as directed. 56 M & L for preparing the existing painted steel surface and painting with one coat of aluminium paint on cross arms, clamps, MS flat and street light brackets if any on Steel / RCC pole for Doublecross Arm for three Phase4 wire system complete all as specified and directed. 57 Supply and fixing in repairs LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.. 58 S&F XLPEinsulated, screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100Volts grade cross sectional area 16 Sqmm 4 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc all as specified and directed. 59 Note for item No 58 :- Excavation and earth work shall be measured and paid separately. 60 Supply, transporting to site, erecting and fixing in position, steel tubular swaged poles of 9mtr longtype 410 SP- 31 IS-2713 marked complete with CI/ MS base plate, finial taper plug, bolts, nuts, washers and screws as specified, drilling of necessary holes including painting with two coats of aluminium paint overa coat of red oxide primer on exposed surface and black bituminous paint on steel surface embedded in concrete externally and throughout internally and painting 03 nos of band /strips with fluorescent , PO box red synthetic enamel paint (30 cm wide each) at a distance of 30 cm from plinth block and number of poles including taking down existing one completeall as specified & directed by Engineer-in-Charge. 61 Note for item No 60 :- Earth work excavation, PCC foundation, coping will be measured and paid separately. The rate for pole shall also be included painting to steel tubular pole (in side and out side). 62 M&L cement concrete 1:4:8,type D2 (using 40mm graded stone aggregate ) including necessary form work for pole foundation complete all as specified and directed by Engr-in-Charge . 63 M&L cement concrete 1:3:6 type C2(using 40mm graded stone aggregate) including necessary form work for pole foundation complete all as specified and directed by Engr-in-Charge . 64 M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in pole coping completeall as specified & directed 65 S&F Powercontactors 63 Amps, 4 pole,415V, including taking down old item complete all as specified and as directed. Make : Cat No 412557 of Legrand or equivalent in PS 66 M & L for preparing the painted steel surfaces of existing LT steel tubular pole including cross arms, clamps MS flats, steel light bracket if any etc and applying one coat of aluminium paint(above ground/coping level) not exc 8 mtr long including painting of strips of height 0.3mtr each (three nos sky blue and three nos white), writing pole no with black paint with letters/figures 7.5 cm high and tightening of cross arms, clamps and street light brackets complete all as specified and directed. 67 S&F LED aviation obstruction light with IP 66 protection water clear poly carbonate UV stabilized dome neoprene rubber with bind spike with 302 Nos LED bulbs including necessary electric connections including 2.5 sqmm, 2 core, PVC copper cables fixed on wall with 20mm dia PVC conduit from DB to light fitting fixed in and including GI pipe 25mm dia 1 mtr long grouted with PCC complete/ binding with existing angle frame etc complete including taking down existing one complete all as specified and directed.Make : Bajaj Cat No - 110731 or equivalent in Wipro/ CG. 68 M & L earthing testing, identifying the earth and recording of test results in prescribed format all as directed by Engineer-in-Charge. Each earth pit result be submitted to Engineer-in-Charge duly signed by user and MES rep for earth test less than 1 Ohm (10 pits and more considered 1 earthing point) 69 Earthing testing, identifying the earth and recording of test results in prescribed format all as directed by Engineer-in-Charge. Each earth pit result be submitted to Engineer-in-Charge duly signed by user and MES rep for earth test less than 3 Ohm (4 pitsand more considered 1 earthing point) 70 Earthing testing, identifying the earth and recording of test results in prescribed format all as directed by Engineer-in-Charge. Each earth pit result be submitted to Engineer-in-Charge duly signed by user and MES rep for earth test less than 4 Ohm (3 pits and more considered 1 earthing point) 71 Earthing testing, identifying the earth and recording of test results in prescribed format all as directed by Engineer-in-Charge. Each earth pit result be submitted to Engineer-in-Charge duly signed by user and MES rep for Conventional type earthing (individual pit) 72 Note for item No 68 to 71 : The following items are deemed to be inclusive of quoted rate :-(i)The above job shall be carried out by a trained technician having ITI in electrical and well known regarding earthing test. Documentary proof of the education of tradesman shall be produced, before commencement of work. 73 (ii) The afore said test will be carried out in presence of user and MES representative.(iii) Two Party (consisting 2 x 1 No. Technician with 2 x 1 No. Helper) will report every Morningat 9 AM to JE E/M for Daily earth testing. 74 (iv) They will testEarth Resistance Every Day ( not more than 10 Nos earthing/day) in presence of user & MES rep and willrecord it in prescribed format , same will be put to Engineer-in-Charge,JE E/M duly signed by user & MES rep on very Next Day, failing which a Sum of Rs. 100.00 per Day will be recovered from the Contractor. 75 (v) Earth Resistance Tester will be provided by the Contractor. (Tester should be calibrated from Authorised Company/ Lab). 76 (vi) Contractor will be responsible for pouring of water in the Earth Pits Weekly at their own arrangement with Water Tanker, etc. (water will be provided by the contractor at his own arrangement and nothing extra will be admissible). 77 (vii) Checking of Earth Pits existing and improve it by watering / adding a layer of Salt/ Magnesium Sulphate/ Charcoal, etc. 78 (viii) Contractor will be responsible for marking of Earth check date and due date on existing Plate with paint as specified by Engineer-in-Charge. 79 (ix)Contractor will be responsible for cleaning of bushes and grass all around upto 1.50 Metre Area of existing Earth Pit with tightening of Strip. 80 (x)EP No should be mentioned on individual earth pits and ER value of installation etc all as specified and directed by Engr In Charge. 81 (xi)It will be the responsibility of the contractor to liase with Station authority to obtain security pass as per station rules for entering/ working in high security tech area. 82 Checking of any breaking in the link of earth strip wire of Galvanised/Copper/Aluminium Strip any size and jointing them by Exothermic Welding or Brazing including taking down old unserviceable one, complete all as specified and as directed. 83 Attending unserviceable/ non-functional street light complaints (for street light/perimeter lights/high mast light/flood light etc of any type/size fitted on poles/walls/post/pillars etc)by deploying technically qualified and experienced technicians to find out defective/taking out unserviceable parts such as electronic driver, PVC insulated copper conductor cable for connecting street light fittings etc and repairing by changing the defective parts including minor repair to cable connection/loose connection, screws, nuts & bolts and insulation tap to insulate the LT joint etc and testing complete all as specified and as directed for domestic area of old Kalpa colony, new Kalpa colony, Mehra colony, MAP qrts, Akash enclave, Gulmohar enclave, Kiran enclave, MES colony, AFWWA, various connecting roads and other facilities such as shopping complex/ various institutes/ messes/ play ground, complete perimeter etc located in complete domestic area andtechnical area at AF Station Sulur 84 Note for item No 83 :- The following items are deemed to be inclusive of quoted rate :- 85 (a)The above job shall be carried out by a trained electrician having ITI in electrical, documentary proof of the education of tradesman shall be produced before commencement of work. 86 (b)Supply only items to be delivered/ supplied to AGE E/M store yard as per qty asked by Engineer-in-Charge with in one calendar month from the date of commencement of contract and these items will be issued from AGE E/M store yard for attending unserviceable/ defective street light complaints. 87 (c)Contractor or his Authorised Representative has to inspect all Street/ Security Lights on Daily basis at their own arrangement between 7.00 PM to 9.00 PM and maintain the record in Register which will be put up to Engineer-in-Charge/ JE on the very Next day. 88 (d) A Joint Inspection for Serviceability of all Street/Security Lights will be carried out from 7.00 PM to 9.00 PM on every MONDAY by Engineer-in-Charge/ JE (E/M)/ User along with Contractor or his authorised Representative. 89 (e) Contractor has to arrange own moveable Generatorof suitable capacity for repairing and testing of the Street/ Security Lights, defect rectification of Cables, etc. and to check the serviceability after repair.No Electricity shall be provided by the Department on this account. 90 (f) Quoted Unit Rate shall deemed to be inclusive of attending any breakdown of Street/ Security Lights during night. Contractor has to arrange Electrician and Helper and all necessary T&P and Equipments to remove the breakdown. Fault will be intimated through Telephone/ SMS. 91 (g)In case of any delay in attending the complaint more than 12 hrs after handing over routine/urgent work, the contractor shall be liable to pay the penalty as described in penalty clause given here as under. 92 (h) The penalty shall be applicable to the contractor if the delay is noticed by the Engr-in-Charge more than twelve hrs after handing over works of urgent nature to the contractor. The Engr-in-Chargeshall handover the slip containing specification of work to the contractor by lodging the time and signature of contractor be obtained on slip.The contractor shall attend the complaint immediately and shall report to Engr-in-Charge with in 12 hrs. The contractor will keep his tradesmen in stand by for attending any routine / urgent works from the executive.If the nature of job is such that the work cannot be completed within period of 12hrs then the facts shall be brought to the notice of the GE/Engr-in-Chargeand the period for the working to the complaint shall be decided by the GE/EIC. If the delay is more then twelve hrs period and the GE is not satisfied with the reason for delay then penalty at the rate of Rs 50/- per job shall be deducted from the dues of the contractor. Please note that this penalty is exclusively other then the condition 56 of IAFW - 2249 and shall be treated as interim condition of the contract and shall be enforce above as and when delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Dept.The decision of the Accepting Officer is this regards shall be final and binding. 93 (j) Contractor has to ensure serviceability of all Street/ Security Lights of DOMESTIC & TECHNICAL AREA on Daily basis in any Weather Condition at their own arrangement. 94 (k)Contractor shall provide conveyance to the deployed labour for maintaining the services without any extra cost to department. 95 (l)Vehicle mounted ladder for maintaining services shall be provided by the contractor at no extra cost to department. 96 (m) Materials requiredfor the repairing of the lights shall be measured and paid separately under respective item(s). But labour required for taking down, dismantling, repairing and replacing parts and reinstalling and testing the street lights fittings shall deemed to beincluded in the rate quoted. 97 (n)Necessary T&P, Safety Belt, Vehicle, Aluminium Ladder, etc. will be arranged by the Contractor and Cost for the same shall deem to be included in the Quoted Unit Rate. 98 (o)All safety measures and provision of all safety devices, first aid box etc shall be provided by the contractor.Contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. Unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 99 (p)All type of T & P, PVC insulation tapes, minor nuts/ bolts/ washers etc required for maintaining the services shall be provided by the contractor without any extra cost to department. 100 (q)Attending and repairing complaint for onelightof any type shall be measured and paid as one Job. 101 (r)Earth work (if necessary at Site) for removing of any Cable Fault will be Measured and Paid under respective Items. 102 (s) The contractor shall maintain a record of all urgent work at and if the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the Govt. 103 (t)Contractor shall provide contact details of his responsible person(s) for any emergency. 104 (u) Any Materials replaced which are not specified in SCHEDULE OF CREDIT will be deposited to MES STORE YARD without any extra Cost to the Department. 105 Supply only electronic Driver with input voltage 220 to 240Volt and output voltage suitable for LED light fitting of capacity 10 watt, complete all as specified and as directed. 106 Supply only electronic Driver with input voltage 220 to 240Volt and output voltage suitable for LED light fitting of capacity 20 watt, complete all as specified and as directed. 107 Supply only electronic Driver with input voltage 220 to 240Volt and output voltage suitable for LED light fitting of capacity 36 watt, complete all as specified and as directed. 108 Supply only electronic Driver with input voltage 220 to 240Volt and output voltage suitable for LED light fitting of capacity 45 watt, complete all as specified and as directed. 109 Supply only electronic Driver with input voltage 220 to 240Volt and output voltage suitable for LED light fitting of capacity 76 watt, complete all as specified and as directed. 110 Supply only electronic Driver with input voltage 220 to 240Volt and output voltage suitable for LED light fitting of capacity 120 watt, complete all as specified and as directed. 111 Supply only electronic Driver with input voltage 220 to 240Volt and output voltage suitable for LED light fitting of capacity 160 watt, complete all as specified and as directed. 112 S & F GI water tubes of size of 20 mm bore medium grade ISI markedwith all fittings such as bend, elbow, socket, tee etc and fixed completeto wall and ceilings or laid in floors including taking down old unserviceable one, complete all as specified and as directed. 113 S & F Bib taps 20 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete including taking down old unserviceable one, all as specified and as directed. 114 S & F in repairs Air Termination Single Pointed Aluminium Rod dia upto 20mm and length upto 300mm including provision of Cement Concrete 1:2:4 (20mm graded stone aggregate) Block 300x300x300 mm and necessary Fixing Arrangement at Roof, complete all as specified and as directed. 115 Note for Item No 114:- If threaded of the Rod is damaged then Contractor will be responsible for cutting of thread for fixing the Rod. Any minor repairs/ materials is deemed to be included. 116 S & F Aluminium strip 25 x 3mm with saddles and fixing screws etc. for roof conductors and down conductors above ground including taking down existing one complete all as specified and directed. 117 S & F Galvanised Iron Tubing/Pipe 40mm bore, light grade for Strip Protection, fixed in Walls/Floors with suitable type of Clamps, etc. including taking down old unserviceable one, complete all as specified and as directed. 118 S & F in repairs Stainless steel screw/ nut and bolts (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut of dia 5mm to 10mm, n. exc 25mm long complete all as specified and directed. 119 S & F Mild Steel Sheet of size approximate 300x200x1.6mm thick Sheet Egg type, Half round type, Rectangular type and Triangular type with welded 1 (Inch) dia 2 (Feet) long Mild Steel Pipe with duly different Synthetic Enamel Paint cutting of Equipment Earth/ Lighting Arrester Earth/ Signal Earth etc. complete as specified duly painted as specified and marking of Earth Plate Number/ Description of Earthing/Type of Earthing on Plate with White Paint including Earth Plate No. and Earthing Resistance with Earthing Check Date and Earthing Check Due Date including taking down old unserviceable one, complete all as specified and as directed 120 Excavation in existing defective earth pit as notified by the Engr-in-Charge and spreading Common Salt, Charcoal dust and Magnesium sulphate complete all as specified and directed by Engr-in-Charge. 121 Note for Item No 120:-Common Salt, Charcoal dust and Magnesium sulphate shall be measured in relevant item of schedule. However labour element for spreading is deemed to be included. 122 Supply only common salt commercial in trenches to improve the ER value of existing earth pits complete all as specified and directed. 123 Supply only charcoal dust/Breeze each bags of 25 Kg in trenches to improve the ER value of existing earth pits complete all as specified and directed. 124 Note for Item No 123:-Earthing charcoal dust/Breeze shall be supplied in packing as per originally packed by the manufacture 125 Supply only Magnesium sulphate in trenches to improve the ER value of existing erath pits complete all as specified and directed.. 126 S&F XLPEinsulated, screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100Volts grade cross sectional area 10 Sqmm 4 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc all as specified and directed. 127 Note for item No 126 :- Excavation and earth work shall be measured and paid separately. 128 Supply and fixin replacement of high power LED street light fittings energy saving luminaire with lens , capacity 36 watt with system efficacy (lm/w) shall be 100 lumenper watt or more lumens per watt, total system lumen not less than 3600 lumens, PF not less than 0.95, CRI not less than 70,colour temp. 5000K to 6500 K, surge protection not less than 5 KV, high pressure die cast aluminium alloy LM6 housingIP-65/66 class 1 protection, toughened glass cover, driver efficiency > 85% with constant output of current and voltage against input voltage variation 120 to 270 volt at 50 Hz ( + 5%), THD< 10% completeincluding taking down existing complete all as specified and directed. 129 S&F XLPEinsulated, screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100Volts grade cross sectional area 10 Sqmm 2 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc complete all as specified and directed. 130 S&F XLPEinsulated, screened, PVC Bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100Volts grade cross sectional area 6 Sqmm 2 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets, taking down existing cable etc complete all as specified and directed. 131 Note for item No 129 & 130 :- Excavation and earth work shall be measured and paid separately. 132 Supply and fixin replacement of high power LED street light fittings energy saving luminaire with lens , capacity 60 watt with system efficacy (lm/w) shall be 100 lumenper watt or more lumens per watt, total system lumen not less than 3600 lumens, PF not less than 0.95, CRI not less than 70,colour temp. 5000K to 6500 K, surge protection not less than 5 KV, high pressure die cast aluminium alloy LM6 housingIP-65/66 class 1 protection, toughened glass cover, driver efficiency > 85% with constant output of current and voltage against input voltage variation 120 to 270 volt at 50 Hz ( + 5%), THD< 10% completeincluding taking down existing complete all as specified and directed. 133 S & F synchronising electronic timer unit operated on AC 230 Volts, 24 hrs clock time for controlling street lights including taking down old unserviceable timer switches complete all as specified and directed.Make :-Cat Part No : 4126 41 of Legrand or equivalent in L&T, ABB. 134 M & L cleaning of existing solar street light panels fixed above street light pole of approximate height 6 meter by using wet cloth dipped in soap water including the panel perimeter complete all as specified and directed. 135 Note for Item No 134:- (i) The contractor shall be responsible for arrange necessary conveyance vehicle, Aluminium self supporting ladder/bamboo ladder, bucket, soap powder, cloths etc and the quoted rate shall be deemed to be inclusive for the above. 136 (ij) Contractor has to ensure serviceability of solar street light panel of DOMESTIC & TECHNICAL AREA on Daily basis in any Weather Condition at their own arrangement. 137 (iii)Contractor shall provide conveyance to the deployed labour for maintaining the services without any extra cost to department. 138 (iv)Vehicle mounted ladder for maintaining services shall be provided by the contractor at no extra cost to department. 139 (v)Necessary T&P, Safety Belt, Vehicle, Aluminium Ladder, etc. will be arranged by the Contractor and Cost for the same shall deem to be included in the Quoted Unit Rate. 140 (vi)All safety measures and provision of all safety devices, first aid box etc shall be provided by the contractor.Contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. Unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 141 M&L in repairs Earthing with Galvanised Earth Plate Electrode 600x600x 6mm thick burried directlyin Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with Galvanised Earth Strip of size 25x6mm by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar including GI 40mm bore (dia) light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt Magnesium Sulphate (1 : 1: 0.5) in alternate layers of not exc 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed. 142 Note for Item No 141 :-(a)All Joints should be joined by Exothermic Welding or Brazing. 143 (b)After completion of work earthing shall be tested by the contractor in presence of Engineer-in-Charge, User and proper record shall be maintained duly signed by all concerned. 144 (c)Earth resistance tester will be provided by the contractor. It should be calibrated from authorised company/ lab.. 145 (d)After testing if desired earth resistance of less than 3 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained. 146 (e)Rate shall include GI strip and protection pipe of length up to 7.5m 147 S&F Galvanised earth strip of size 25 x 6mm fixed on proper post insulator at the instrument end including taking down existing strip complete all as specified and directed. 148 Taking down existing GI strip 25x3mm thick as earthling lead with its accessories and re-fixing to wall/roofs etc. drawn in conduit/GI pipe etc complete all as specified and as directed 149 Note for Item No 148:-Unit rate is deemed to be included for old broken insulators/ clamps replace with new insulators of existing size from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed. 150 S & F Epoxy base insulators of suitable size 40mm height for fixing GI earth strip on wall/ceiling/floor/poles etc including taking down existing one complete all as specified and as directed 151 Note for Item No 150:-Quoted Unit Rate deem to be included drilling holes per Metre or as specified on GI/Aluminium/Copper Strip of any type and size. 152 M & L for cutting and screwing existing GI tubing of size 20 /25/ 40mm bore for alterations or additions complete all as specified and as directed 153 Supply only chemical i.e. ground enhancing compound in bag of 25 Kg each complete all as specified and directed. 154 Note for Item No 153:-Material shall be delivered in the store yard of AGE E/M or as directed by AGE E/M and nothing extra shall be payable on this account. 155 S & F Stop valve, cast copper alloy, screwed down, high pressure with crunch or butterfly handle screwed both ends for union and fixed for size 20mmborepipe complete including taking down existing one complete all as specified and directed. 156 Repairing Damaged Earth Pit Cover Factory Made Earth Chamber in cement concrete 1:3:6(20mm stone aggregate) as shown in Electrical Plate No. 03 of MES Schedule Part- I and providing Pre-cast RCC 1:2:4 (20mm graded stone aggregate) in Slab /PitCover 450x450x 50mm in size, reinforced with and including 10mm dia TMT Bars @ 100mm Centre to Centre in both ways including Funnel and cleaning the surrounding of Earth Pit Cover and pouring Salt Water to improve the resistance and measuring and recording the same in presence of Engineer-in-Charge, complete all as specified and as directed. 157 S & F Copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc including taking down existing one complete all as specified and directed. 158 Note for Item No 157:-All Joints should be joined by Exothermic Welding or Brazing. 159 M & L for Brazing / exothermic welding arrangement for existing copper strip of size 32 x 6 mm / 20 x 3 mm thick completeall as specified and directed. 160 S & F Test Point Terminal Block made of Gun Metal or Phosphorus Bronze size 75x75x25mm, drilled and screwed including 3 No. 8mm dia, 25mm long hexagonal Head Screw including taking down old unserviceable one, complete all as per specified and as directed. 161 S & F Air Termination Single Pointed Copper Rod 16mm dia and 300mm long with arrester clamp 16mm made out of Brass including provision of cement concrete 1:2:4 (20mm graded stone aggregate) block 300 x 300x 300mm and necessary fixing arrangement at roof including taking down old unserviceable one, complete all as specified and as directed. 162 Note for Item No 161:-If threaded of the Rod is damaged then Contractor will be responsible for cutting of thread for fixing the Rod. Any minor repairs/ materials is deemed to be included. 163 S & F Factory Made RCC 1:2:4 (20mm graded stone aggregate) in Slab/Pit Cover 350x350x50mm in size, reinforced with and including 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, complete including taking down existing one all as specified and as directed. 164 Removing existing unserviceable earthing system and Supply, installation, testing & commissioning of maintenance free chemicalearthing system comprising 17mm dia copper bondedrod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducingliquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 8-10 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation. 165 The quoted rate shall also deemed to be included the following :- (i)Prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of Engr-in- Charge/JE (E/M),user and the report has tosubmitto Garrison Engineer with recommendation of manufacturer, if required additional interconnection ofearthing (not more than 04 number of earthing) to achieve earth result less then 1 Ohms. The arrangement done for soil resistivity testingandsubmission of report with recommendationdeemed to be included in the quoted rate. 166 (ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors. 167 (iii) Rateofearth energizer compound of 25 Kg of 02 bags and earthresistance reducingliquid 10 litre per cane for each pit deemed to be included in the quoted rate. 168 (iv)Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor before commencement of work. 169 (v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH valve should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete. 170 (vi) Copper strip of size 20 x 3 mm shouldbe fixed on proper post insulator at the instrument end ( The rate of earthing strip up to7.5 Mtrs is included in the quoted rate). 171 (vii)Testing of earth shall be carriedout in presence ofdepartmental and user representativeand report shall be submitted to Garrison Engineer duly signed by all concern. 172 (viii)Earth resistance tester will be provided by the contractor.Tester should be calibrated from authorised company/ lab. 173 (ix)Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintained duly signed by all concerned.After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained. 174 (x) The contractor shall given a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion. 175 (xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including dry or rocky soil. 176 (xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is maintained. 177 (xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing per each earthing shall be retained from payment due to the contractor for the guarantee period. 178 (xiv) The electrode shallcarry manufacturers name . 179 (xv) The connection clamp shall be permanently welded to the copper bounded rod to avoid any kind of connectivity loss. The pre-welded copper bounded rod shall not need any additional clamp for termination. 180 (xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm. 181 (xvii)The contractor shall submit CPRI India certified document for copper bonded rod to ensure genuinity of material. 182 (xviii) Sign boardof mild steel 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxideZinc chrome primer showing result of earthing should be fixed near the earth pit after completion as directed by engr -in- charge. 183 (xix)Earth work such as auguring andmaking good the surrounding area shall carried out in any type of soil. 184 S & F in repairs Earth pit cover madeof heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 9.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mm dia for each electrode pit complete all as specified and directed. 185 Note for Item No 184 :- The contractor shall submit load bearing capacity certificate from the manufacturer. 186 Supply and fix IP 66 Thermoplastic PC- GFS Polycarbonate weather-proof Junction Box size 255L x 205B x 112D MM with plain walls for cable entries to be drilled individually, system voltage : 415V, 50hz,The plain side walls on the four sides can be drilled and customized for cable entries from any direction. Lid fasteners shall not have screws but shall be with quarter turn locking knobs – which is well visible ( open – locked), and they will be sealable without any accessories.Cable terminal :- 25 Sq mm- 4 no with 10A SP MCB- 1 no, 6sq mm disconnected terminal- 1 no, The junction box shall fulfil the following standards Weather proof : UV resistant due to solar radiation, Rainwater proof, temperature resistant. Salt water proof & shall be suitable for off-shore applications. IEC 60670-22 : Particular requirements for connecting boxes and enclosures. IEC 60695 – 2 – 11 : Flame – retardant & Self-extinguishing. Glow Wire tested at minimum 960 deg C. IEC 60529 : IP 66 / IP 67 / IP 69 degree of protectionincluding taking down existing all as specified and directed. 187 Taking down carefully hanger lights for repair/ replacement of defective spare parts such as ballast, etc including taking down old one of any capacity from 150 watts Flame Proof light including cleaning internally and externally fixing back the fitting in same position after repair and test complete all as specified and as directed. 188 Note for Item No 187:-Following shall be part of job under this item :- 189 (a)The above job shall be carried out by a trained electrician 190 (b)All sort of petty T&P items such as PVC insulation table, ladder, galvanised screws, nuts, bolts, washers etc. required to accomplish the job shall be provided by the contractor with out any extra cost to dept. 191 (c) Necessary T&P, Safety Belt, Vehicle, Aluminium Ladder, cranes etc. shall be arranged by the Contractor and Cost for the same shall deem to be included in the Quoted Unit Rate 192 (d)All safety measures and provn of all safety devices, first aid box etc shall be provided by the contractor.Contractor will be solely responsible forfull safetyof the persons deployed for providing the services and department will have no liability for any type of accident/injury of any type. Unit rate quoted will be deemed to include the cost of the same and no extra payment shall be made on this part. 193 Supply and fix in repairs flame proof electronic LED driver suitable for flame proof flood light fitting 150W sun shelter down light/ flood light fitting of make Sudhir/Baliga/ CG complete all as specified and directed. 194 M&L for Sub main wiring with PVC insulated unsheathedFRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and including suitable size steel conduit and all accessories fixed to wall/floors along with 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size complete all as specified and directed. 195 Note for item No 194 :- (a)2 runs of 4 sqmm cable along with onerun of 4 sqmm cable for earth conductor and one run ofsteel conduit shall be measured as one length. 196 (b)Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. 197 M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and including suitable sizesteel conduit and all accessories fixed to wall/floors along with 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size complete all as specified and directed. 198 Note for item No 197 :- (a)2 runs of 6 sqmm cable along with onerun of 6 sqmm cable for earth conductor and one run of steel conduit shall be measured as one length. 199 (b)Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. 200 S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. 201 Supply and fixing in replacement of switch flame proof switch socket and plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P + earth, complete all as specified and directed Make : Sudhir, Bajaj, Baliga. 202 Supply and fixing in replacement of LUMINAIRE WELLGLASS LED ZONE I-Gr IIC LM6 Die cast Aluminium LM6 housing, 230V AC, 50 Hz Suitable for 150W LED fitting with 2 Nos of 0.75ET cable Entry, Neoprene gasket , Stainless steel Hardware, Epoxy powder coating light grey finish shed 631/IS-5 with cable gland, plug & lamp complete all as specified and directed. Make cat No FLPW-2595/II C/L of Sudhir, Bajaj or Baliga or equivalent make 203 S&F in replacement of flame proof bulk head fitting 5 W (to be used with Red LED Bulb) including fixing arrangement all as specified and directed. 204 S&F in replacement of cable tray perforated type of size 100 x50mm made out of 1.6mm thick GI sheet fixed in PEB structure by providing MS angle 40x40x5mm clamps etc including fittings like bend, tee and making good the disturbed portion and matching with existing surface complete all as specified and directed 205 S&F in replacement of flame proof weather proof VTPN distribution board 4 way 415 volts with MCCB 63A , FP, 16 KA as incommer-01 No and MCB 32A TP-02 Nos MCB 16A SP-18 Nos as out going complete all as specified and directed.. Make-Sudhir or Bajaj, Baliga or equivalent make.
Contract Date: Dec 12, 2023 Contract Value : ₹ 48.80 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 12
Tamil Nadu View Result →
48.
Defence #1764807 AOC
Completion Of Incomplete Work For Provision Of Af School At Afs Begumpet - Lumpsum Price Worked Out By The Contractor For “Building Or Works” As Listed In Schedule ‘A’Part–I 3 Lumpsum Price Worked Out By The Contractor For “Demolition & Dismantling” As Listed In Schedule ‘A’Part–Ii 4 Lumpsum Price Worked Out By The Contractor For “Site Clearance” As Listed In Schedule ‘A’Part–Iii 5 Lumpsum Price Worked Out By The Contractor For “Internal Water Supply” As Listed In Schedule ‘A’Part–Iv 6 Lumpsum Price Worked Out By The Contractor For “Internal Electric Supply” As Listed In Schedule ‘A’Part–V 7 Lumpsum Price Worked Out By The Contractor For “Lightening Protection” As Listed In Schedule ‘A’Part–Vi 8 Lumpsum Price Worked Out By The Contractor For “Water Cooler” As Listed In Schedule ‘A’Part–Vii 9 Lumpsum Price Worked Out By The Contractor For “Road / Path / Culvert” As Listed In Schedule ‘A’Part–Viii 10 Lumpsum Price Worked Out By The Contractor For “External Water Supply” As Listed In Schedule ‘A’Part–Ix 11 Lumpsum Price Worked Out By The Contractor For “External Electric Supply” As Listed In Schedule ‘A’Part–X 12 Lumpsum Price Worked Out By The Contractor For “Sewage Disposal” As Listed In Schedule ‘A’Part–Xi 13 Lumpsum Price Worked Out By The Contractor For “Area Drainage” As Listed In Schedule ‘A’Part–Xii 14 Lumpsum Price Worked Out By The Contractor For “Fencing & Gate” As Listed In Schedule ‘A’Part–Xiii 15 Schedule `A Part - Xiv Fittings & Fixturesis Not Prepriced By Mes And Prepriced Rates Indicates 0.0 Under Column 5 Signified This Fact Only. Bidder Shall Insert Their Rates In Green Filed Under Col-6. 16 Taking Down Old Us Db Tpn 4 Way With McbS All As Specified And As Directed. 17 15Mm Dia Two Way Bib Cock With Built In Arrangement To Fix 15Mm Brass Union Of Health Foucet, Fancy Type Cast Copper Alloy Cp With Crutch Or Butterfly Handle, Screwed Down, Screwed To Brass Union Of Pp-R Fittings Complete All As Specified And As Directed. 18 Hand Shower ( Health Faucet ) With 8Mm Dia, 1 Metre Long Flexible Tube And Wall Flange Of Approved Make Fixed With Union Fitted To Two In One Tap Complete All As Specified And As Directed. 19 Bib Tap 15Mm Dia Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed. 20 Taking Down Old Us Db Spn 8 Way With McbS All As Specified And As Directed. 21 Taking Down Old Us Submain Wiring2x4 Sqmmall As Specified And As Directed. 22 Taking Down Old Point Wiring With Alminium Wires Of 1.5 Sqmm With Switch Boards & Old Piano Switch , Lamp Holder, Ceiling Rose , Switch Socket 5 A , Switch Socket 15 A , Fan Regulator Etc Complete All As Specified And As Directed. 23 Taking Down Oldfluorescent Tube Light Fitting 1 X 40 W All As Specified And As Directed. 24 Dismantling Of Gate Valve 20 Mm Dia All As Specified And As Directed. 25 Dismantling Of Gate Valve 50 Mm Dia All As Specified And As Directed. 26 Modular Telephone Jack Complete All As Specified And As Directed. Make Legrand Catpart No Rj-11 Cat No 5736 27 Or Its Equivalent Given Here In After. 27 Modular Tv Socket 1 Module All As Specified And As Directed. Make Legrand Cat No 5736 25 Or Its Equivalent Given Here In After. 28 Voltage Stabilizer For Automatic Operation Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170V To 250V With Output Voltage Stabilized At 230V With Accuracy + / - 2.5% And Capacity 1.0 Kva Complete All As Specified And As Directed. 29 Cutting Of Existing Bituminous Road For Laying Of Gi Pipe For Ug Cable & Making Good To The Disturbed Surfaces By Providing Pcc Or Same Material After Laying Of Cable Protection Pipe And Returning Filling Of Soil All As Specified And As Directed. Note:- Excavation And Earth Work Below Bt Road Will Be Measured And Paid Under Relevant Items. 30 M Sand For Cable Cushioning In Trenches Or In Duct Complete All Specified. Note :Punned Thickness Shall Only Be Measured. 31 Supplying, Erection, Testing And Commissioning Of Transformer Outdoor Type Capacity 100 Kva, Inclusive With Standard Fittings, Gauges As Per Relevant Latest Is And All Jointing Materials, Connecting With Electrical System, Earthing Connections Etc., 3 Phase, 50 Hz, Double Wound With Copper Winding Wire, In Mild Steel Tank, As Per Is- 1180 Part I : 2014 As Well As Confirming To Latest Relevant Is And Bse Certification, 11 Kv / 415 Volts, 3 Ph, With Tapping Arrangements On Ht Side To Vary Secondary Voltage ±5% In Step Of ±2.5% Etc. Complete, Including Termination Boxes On Lt And Ht Sides, Initial Filling Of Transformer Oil To Appropriate Level, Testing For Desired Dielectric Strength, Including Construction Of Platform Of Height Not Less Than 1.5M, For Mounting The Transformer With Brick Masonry In 1:6 Cement Mortar, 12Cms Thick Rcc Slab, With A Gap Of 60Cm All Around The Transformer For Working Space All As Specified And As Directed By Engineer-In-Charge. 32 Supplying, Installation, Testing And Commissioning Of Automatic Power Factor Correction Panel ( Apfc ) , Out Door Type Of Capacity 50Kvar, 125 Amps Mccb Fp As Incomer, Suitable For 3 Phase, 415 V, 50 Hz System, Out Door Type, Factory Fabricated With 3.15 Mm Thick Crca Sheet With Inspection Doors At Front And Rear Side, Auto / Manual Power Factor Corrector, Necessary Locking Arrangements, Suitable Opening For Vent And Cable Entry, Apfc Panel Board Duly Pretreatedand Powder Coated Finish With Angle Iron Of Size 50X50x5 Mm Thick, Floor Mounted Type With Mild Steel Angle Base Frame Supports Grouted In Pccbase Inclusive Of Pcc And Earth Work Complete And Comprising Of The Following For Achieving 0.99 Power Factor All As Specified And As Directed. Make: L&T / Gec / Siemens / Abb ( A ) Mccb Fp Of Capacity 125 Amps, 25 Ka With Adjustable Thermal & Magnetic Settingadjustable– 01 No ( B ) Copper Bus Bar Tpn Of Suitable Capacity As Recommended By Manufacturer. ( 3 Nos For Phase+1 No For Neutral ) -01 Set ( C ) Md-Xl Double Metalized Paper ( Extra Low Loss ) , Heavy Duty Capacitors, 3 Ph, 440V 3X10 Kvar + 3X5 Kvar + 2X2.5 Kvar ) ( Note: Each Capacitor Shall Have Inrush Current Limiting Coils, Self Discharging Resistance. ) ( D ) Suitable Back Up Protection For Each Capacitor Bank Operating Input Voltage 415 Volts ±15%, 50 Hz, With Suitable Capacity Mcbs / Mccbs / Contactors With Bases And Apfc Relay . ( E ) 8 Stage, Micro Processor Controlled, Flush Mounted, On Site Programmable Apfc Relay, With Pf Adjustable Range From 0.8 To 0.99 ( F ) Automatic / Manual Switching Provision. ( G ) Internal Power And Control Wiring With Suitable Size Of Pvc Insulated Copper Conductor Cable. ( H ) Ct Coils Of Suitable Capacity As Recommended By Manufacturer- 01 Setnote: Ct Shall Be Installed In The Existing Lt Panel Board With And Including Provision Of Suitable Control Wiring From Ct To Apfc Panel. ( J ) Digital Multi- Functional Meter To Measure Current, Voltage, Frequency And Power Factor With Built-In Selector Switches And Having Programmable Ct Ratio Of Suitablesize. ( K ) Selector Switch- 01 Set ( L ) Any Additional Accessories As Provided By Oem For Proper Functioning Of Apfc Panel. 33 Feeder Pillar Box Cubical Type, Factory Made, Suitable For 3 Phase, 415 Volts, 50 Hz System, With 200 Amps Capacity Aluminium Bus Bar 04 Nos, Outdoor Type, Factory Fabricated With 3 Mm Thick Crca Sheet With Inspection Doors At Front & Rear Side Inclusive Of Necessary Locking Arrangement, Suitable Opening For Vent And Cable Entry, Spare Terminal For Mccb- 02 Nos. Lt Panel Board Duly Pretreatedand Powder Coated Finish With Angle Iron Of Size 50X50x5 Mm Thick Floor Mounted Type With Mild Steel Angle Base Frame Supports Grouted In Pccbase Inclusive Of Pcc And Earth Work Complete And Comprising Of The Following:- ( Main Feeder Pillar Box ) ( A ) Mccb, 4 Pole 250A, 35 Ka ( Havells Ihllsecf0250 ) - 01 No ( B ) Mccb, 3 Pole 200A, 35 Ka ( Havells Ihllsect0200 ) - 02 Nos ( C ) Mccb, 3 Pole 40A, 25 Ka ( Havells Ihlght040 ) - 01 No ( D ) Mcb Sp 16A, 10 Ka, C Curve ( Havells Dhmgcspf006-032 ) - 02 Nos ( E ) Time Switches 415V, 20 A- 01 No ( Havells Hxts0306a ) ( F ) Digital Display Vaf Panel Meter- 01 No ( G ) Led Indicator Ryb - 01 Set ( H ) Internal Wiring With Pvc Insulated Copper Cable- 01 Job 34 Feeder Pillar Box Cubical Type, Factory Made, Suitable For 3 Phase, 415 Volts, 50 Hz System, With 200 Amps Capacity Aluminium Bus Bar 04 Nos, Outdoor Type, Factory Fabricated With 3 Mm Thick Crca Sheet With Inspection Doors At Front & Rear Side Inclusive Of Necessary Locking Arrangement, Suitable Opening For Vent And Cable Entry, Spare Terminal For Mccb- 02 Nos. Lt Panel Board Duly Pretreatedand Powder Coated Finish With Angle Iron Of Size 50X50x5 Mm Thick Floor Mounted Type With Mild Steel Angle Base Frame Supports Grouted In Pccbase Inclusive Of Pcc And Earth Work Complete And Comprising Of The Following:- ( School Main Feeder Pillar Box ) ( A ) Mccb, 4 Pole, Adjustable Thermal & Magnetic Release 200A, 35 Ka- 01 No ( Incoming ) ( B ) Mccb, 3 Pole, Adjustable Thermal 100A, 35 Ka- 02Nos ( Havells Hlfnt0100 ) ( C ) Mccb, 3 Pole, Adjustable Thermal 40A, 25 Ka- 01 Nos ( Havells Ihlght0040 ) ( D ) Mccb, 3 Pole, Adjustable Thermal 25A, 16 Ka- 02 Nos ( Havells Ihlgnt0025 ) ( E ) Digital Display Vaf Panel Meter- 01 No ( F ) Time Switches 415V, 20 A- 01 No ( Havells Hxts0306a ) ( G ) Led Indicator Ryb - 01 Set ( H ) Internal Wiring With Pvc Insulated Copper Cable- 01 Job 35 Post-Top ( Gate Light ) Of Capacity 35W Led, Energy Saving, Environmental Friendly, Long Life Aesthetically Designed With Good Indirect Symmetrical Light Distribution, Die-Cast Aluminium Landscape Luminaire With High Power Cob Led As Light Source. Including Suitable Size Of Pipe For Fixing Complete All As Specified And As Directed By Engineer-In-Charge. Make: Havells, Ordering Code: Lhlc18145099 Or Equivalent In Hpl / Crompton Greaves. 36 New Generation Energy Saving & Environmental Friendly Long Life Versatile Pressure Die-Cast Aluminium Ip66 Street Light Fitting Of Capacity 1X70w Led, Drawn Through And Including Gi Bracket Of Suitable Sizelight Grade 1.4 Mtr Bend To Shape Including Ms Clamps Made Out Of Flat Iron Of Size 40X4 Mm -02 Nos And Necessary Nuts, Bolts, Washer As Required Complete All As Specified And As Directed By The Engineer-In-Charge. Make: Havells, Lhfaxu7dpn6j070 Or Equivalent In Hpl / Crompton Greaves. 37 Factory Made Outdoor Type Street Light Loop In Loop Out Box Made Out Of 2Mm Thick Crca Sheet, Of Size 220Mmx180mmx150mm With Pretreated & Powder Coated Comprising Suitable Size Bus Bar, Insulators, Connectors, Etc And With One Sp Mcb 6 Amp C Series, One Pvc Way Connector Etc Including Suitable Size Clamps, Nut Bolts & Washers Complete Including Suitable Clamps Fo Fixing All As Specified And As Directed. 38 Earthing Complete With Copper Earth Plate Electrode Of Size 600Mm X 600Mm X 3.15 Mm Thick, Buried Directly In Ground Vertically To A Depth Not Less Than 2.25 Mtr Below Ground With Top Edge Of The Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Earth Plate Shall Be Connected With Double Bolts, Nuts, Check Nuts & Washers, To & Including25x3 Mm Copper Strip As Earth Lead, Extended Upto 7.5 M Or Upto Test Terminal Point, Drawn Through 40Mm Dia Med. Gr. Gi Pipe For Protection Of Copper Strip In The Ground, Further Connecting With Suitable Size Of Earthing Strip To Lt Panel, Distribution Boards Etc., Including Excavation, Earth Work, Charcoal, Magnesium Sulphate- 50 Kgs & Bentonite Powder- 30 Kgs Duly Mixed In The Black Cotton Soil For Filling Surroundinggi Plate All As Specified, Pcc Chamber, Rcc Cover Slab, Watering Pipe 20Mm Dia Bore Med. Grade, Wire Net, Funnel Etc. & Testing On Completion All As Specified In Plate No.3 Of Ssr Pt-I, Complete All As Specified And As Directed. Note:-Protection Pipe For Earthing Lead Shall Be Measured And Paid Separately Under Relevant Items. 39 Earthing Complete With Galvanized Steel Earth Plate Electrode 600Mm X 600Mm X 6Mm Thick Buried Directly In Ground Vertically To A Depth Not Less Than 2.25 Mtr Below Ground With Top Edge Of The Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Earth Plate Shall Be Connected To & Includingthe Galvanized Iron Strip 32X6 Mm Upto Panel Board And Connected With Bolts, Nuts, Check Nuts & Washers Including Suitable Size Light Grade Gi Pipe For Protection Of Galvanized Iron Strip, Including Excavation, Earth Work, Charcoal, Magnesium Sulphate- 50 Kgs & Bentonite Powder- 30 Kgs Duly Mixed In The Black Cotton Soil For Filling Surroundinggi Plate All As Specified, Pcc Chamber, Rcc Cover Slab, Watering Pipe 20 Mm Dia Bore Med. Grade, Wire Net, Funnel Etc. & Testing On Completion All As Specified In Plate No.3 Of Ssr Pt I. Note:-Protection Pipe For Earthing Lead Shall Be Measured And Paid Separately Under Relevant Items. 40 Construction Of Valve Chamber Having Inner Dimension 750 X 750 X 750 Mm With Pcc 1:4:8 Type D2 For Foundation, Brick Wall In Cement Mortar 1:4, Pcc 1:2:4 Type B1 For Coping, Rendering In Cm 1:4 15Mm Thick Including Provision Of Top Cover Made Out Of 3 Mm Thick Ms Sheet With Brazing Of Ms Flat Of Size 25 Mm X 4 Mm At Edges And In Diagonal And Angle Iron Base Frame Of 40 X 40 X 5 Mm, Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer And Locking Arrangements Including Necessary Excavation Earth Work Complete All As Specified. 41 Earthing Complete With Copper Earth Plate Electrode Of Size 300Mm X 300Mm X 3 Mm Thick, Buried Directly In Ground Vertically To A Depth Not Less Than 2.25 Mtr Below Ground With Top Edge Of The Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Earth Plate Shall Be Connected With Double Bolts, Nuts, Check Nuts & Washers, To & Including32x6 Mm Copper Strip As Earth Lead, Extended Upto 7.5 M Or Upto Test Terminal Point, Drawn Through 40Mm Dia Med. Gr. Gi Pipe For Protection Of Copper Strip In The Ground, Further Connecting With Suitable Size Of Earthing Strip To Lt Panel, Distribution Boards Etc., Including Excavation, Earth Work, Charcoal, Magnesium Sulphate- 50 Kgs & Bentonite Powder- 30 Kgs Duly Mixed In The Black Cotton Soil For Filling Surroundinggi Plate All As Specified, Pcc Chamber, Rcc Cover Slab, Watering Pipe 20Mm Dia Bore Med. Grade, Wire Net, Funnel Etc. & Testing On Completion All As Specified In Plate No.3 Of Ssr Pt-I, Complete All As Specified And As Directed. Note:-Protection Pipe For Earthing Lead Shall Be Measured And Paid Separately Under Relevant Items. 42 Ceiling Fan Of Size 1200Mm Sweep Complete Including With, Cable 3 Core Of Size 0.5 Sqmm From Ceiling Rose To Fan, Including Writing Mes No 2Cm Height With Synthetic Enamel Black Paintinstalled Complete All As Specified Make Havells Rated 5 Star Type : Es 50 43 Wall Mounting Fan Of Size 400Mm Sweep Complete, With Cable 3 Core Of Size 0.5 Sqmm From Ceiling Rose To Fan, Including Writing Mes No 2Cm Height With Synthetic Enamel Black Paint All As Specified Make Havells Model : Swing Premia Gold Wall Fan 44 Ventilating Fan Of Size 200Mm Sweep, 1 Phase, Complete, With Cable 3 Core Of Size 1.0 Sqmm From Ceiling Rose To Fan, Including Writing Mes No 2Cm Height With Synthetic Enamel Black Paint All As Specified Make Havellsmodel: Ventil Air Dx Wht / Blk. 45 Heavy Duty Exhaust Fan Of Size 300Mm Sweep, 1400 Rpm, 1 Phase, Complete, With Cable 3 Core Of Size 1.0 Sqmm From Ceiling Rose To Fan, Including Writing Mes No 2Cm Height With Synthetic Enamel Black Paint All As Specified Make Havellsmodel: Turbo Force. 46 Led Surface / Suspended Mounted Luminaries , 33 Watts, 2X2 With Latest Led Technology And Efficient Optics Ensuring Perfectly Uniform Illumination And Unparallelleled Light Distribution High Optically Efficient Serrated Diffuser, Isolated Multistage Cccv Driver With Voltage Range 150-270V Ac, Temperature Range- 0 To 50 Deg C, Cri >80, Class-1, Sdcm <5, Driver Efficiency>85%, Power Factor >0.95, Thd<10%, Colour Temperature-6500K, Short Circuit And Over Circuit Protection, Surge Protection- 3Kv In Cm, Safety Extra Low Voltage Safe Level<60V Dc As Per Is-10322 / Iec-60598 Standard, Ip20 Protected, 50000 Burning Hours, With 70% Of Its Initial Lumen Maintained, Luminaire Efficacy>100Lm / W Fixed Complete Including All Accessories And Provision Of Pvc Sheathed 3 Core 1.5 Sqmm Copper Conductor For Connection Complete All As Specified And Directed. Make : Philips Cat Part Nosm 365-C Led 33W-6500 Psu Od Wh Or Its Equivalent Make Of Wipro / Bajaj / Cg 47 4Ft Led Surface & Wall Mountedbattenled Luminaries , 22 Watts, With Latest Led Technology And Efficient Optics Ensuring Perfectly Uniform Illumination And Unparallelleled Light Distribution High Optically Efficient Serrated Diffuser, Isolated Multistage Cccv Driver With Voltage Range 150-270V Ac, Temperature Range- 0 To 50 Deg C, Cri >80, Class-1, Sdcm <5, Driver Efficiency>85%, Power Factor >0.95, Thd<10%, Colour Temperature-6500K, Short Circuit And Over Circuit Protection, Surge Protection- 3Kv In Cm, Safety Extra Low Voltage Safe Level<60V Dc As Per Is-10322 / Iec-60598 Standard, Ip20 Protected, 50000 Burning Hours, With 70% Of Its Initial Lumen Maintained, Luminaire Efficacy>100Lm / W Fixed Complete Including All Accessories And Provision Of Pvc Sheathed 3 Core 1.5 Sqmm Copper Conductor For Connection Complete All As Specified And Directed. Make : Philips Cat Part No Sp 310W Led 22S-6500 Psu Od Wh Or Its Equivalent Make Of Wipro / Bajaj / Cg 48 4 Ft Led Surface & Wall Mountedbattenled Luminaries , 20 Watts, With Latest Led Technology And Efficient Optics Ensuring Perfectly Uniform Illumination And Unparallelleled Light Distribution High Optically Efficient Serrated Diffuser, Isolated Multistage Cccv Driver With Voltage Range 150-270V Ac, Temperature Range- 0 To 50 Deg C, Cri >80, Class-1, Sdcm <5, Driver Efficiency>85%, Power Factor >0.95, Thd<10%, Colour Temperature-6500K, Short Circuit And Over Circuit Protection, Surge Protection- 3Kv In Cm, Safety Extra Low Voltage Safe Level<60V Dc As Per Is-10322 / Iec-60598 Standard, Ip20 Protected, 50000 Burning Hours, With 70% Of Its Initial Lumen Maintained, Luminaire Efficacy>100Lm / W Fixed Complete Including All Accessories And Provision Of Pvc Sheathed 3 Core 1.5 Sqmm Copper Conductor For Connection Complete All As Specified And Directed. Make : Philips Cat Part No Bn 150W Led 20S-6500 Od Gr Or Its Equivalent Make Of Wipro / Bajaj / Cg 49 Led Surface Mounted Luminaries , 9 Watts, With Latest Led Technology And Efficient Optics Ensuring Perfectly Uniform Illumination And Unparallelleled Light Distribution High Optically Efficient Serrated Diffuser, Isolated Multistage Cccv Driver With Voltage Range 150-270V Ac, Temperature Range- 0 To 50 Deg C, Cri >80, Class-1, Sdcm <5, Driver Efficiency>85%, Power Factor >0.95, Thd<10%, Colour Temperature-6500K, Short Circuit And Over Circuit Protection, Surge Protection- 3Kv In Cm, Safety Extra Low Voltage Safe Level<60V Dc As Per Is-10322 / Iec-60598 Standard, Ip20 Protected, 50000 Burning Hours, With 70% Of Its Initial Lumen Maintained, Luminaire Efficacy>100Lm / W Fixed Complete Including All Accessories And Provision Of Pvc Sheathed 3 Core 1.5 Sqmm Copper Conductor For Connection Complete All As Specified And Directed. Make : Philips Cat Part No Sm 518-C Led 9S-6500 Psu Od Wh Or Its Equivalent Make Of Wipro / Bajaj / Cg 50 Led Recessed Mounted Luminaries , 33 Watts, 2X2 With Latest Led Technology And Efficient Optics Ensuring Perfectly Uniform Illumination And Unparallelleled Light Distribution High Optically Efficient Serrated Diffuser, Isolated Multistage Cccv Driver With Voltage Range 150-270V Ac, Temperature Range- 0 To 50 Deg C, Cri >80, Class-1, Sdcm <5, Driver Efficiency>85%, Power Factor >0.95, Thd<10%, Colour Temperature-6500K, Short Circuit And Over Circuit Protection, Surge Protection- 3Kv In Cm, Safety Extra Low Voltage Safe Level<60V Dc As Per Is-10322 / Iec-60598 Standard, Ip20 Protected, 50000 Burning Hours, With 70% Of Its Initial Lumen Maintained, Luminaire Efficacy>100Lm / W Fixed Complete Including All Accessories And Provision Of Pvc Sheathed 3 Core 1.5 Sqmm Copper Conductor For Connection Complete All As Specified And Directed. Make : Philips Cat Part Nosm Rc365b Led 33W-6500 Psu Od Wh Or Its Equivalent Make Of Wipro / Bajaj / Cg 51 21 W High Efficient Led Streetlight, Aluminium Pressure Die Cast Housing Parts For Longlife, Pure Polyester Powder Coated Dark Gray Housing, High Purity Pmma Lenses For Superior Performance, Toughened Glass With Silicon Gaskets For Ip65protection, Driver Cover Designed To Suit Top Maintenance, Suitable For External Pole Dia. Up To 50 Mm, Led Make- Nichia, Power Factor>0.95, Luminaire Lumen Output- 6440Lm, Cccv Driver With Voltage Range 150-270V Ac, Temperature Range- 0 To 50Degc, Driver Efficiency > 85%, Power Factor > 0.95, Thd<10%, Cri >70, Colour Temperature- 5700K, Surge Protection From Over Voltages- 4.0Kv In Cm, 50000 Burning Hours, Luminaire Efficacy >92Lm / W Make: Philips, Cat Part No.Brpo22 Led 21 Cw Mr S1 Psu Gr Or Its Equivalent Make Of Wipro / Bajaj / Cg 52 Mcb Db Tpn 4 Way Vertical Double Doorip 43 Protection, 415 V Ac 50Hz With For Mcb / RcboSfp As Incomer And Dp / Sp Mcbs As Out Going With Tinned Copper Bus Bar , Neutral Link Earth Link Complete Make : Legrand Cat No 607725Or Its Equivalent Make Given Here In After 53 Mcb Db Tpn 6 Way Vertical Double Doorip 43 Protection, 415 V Ac 50Hz With For Mccb Fp As Incomer And Mcb / RcboSsp / Spn / Tp / Tpn As Out Going With Tinned Copper Bus Bar , Neutral Link Earth Link Complete Make : Legrand Cat No 607934Or Its Equivalent Make Given Here In After 54 Mcb Db Tpn 8 Way Vertical Double Door 415 V Ac 50Hz With For Mccb Fp As Incomer And Mcb / RcboSsp / Spn / Tp / Tpn As Out Going With Tinned Copper Bus Bar , Neutral Link Earth Link Complete Make : Legrand Cat No 607741 55 Mcb Db Spn 4 Way, Acrylic Double Door Ip 43 Protection, 240 V, Ac 50Hz With For Mcb / RcboSdouble Pole As Incomer And Dp / Sp Mcbs As Out Going With Tinned Copper Bus Bar , Neutral Link Earth Link Complete Make : Legrand Cat No 607720 56 Mcb Db Spn 8 Way, Acrylic Double Door Ip 43 Protection, 240 V, Ac 50Hz With For Mcb / RcboSdouble Pole As Incomer And Dp / Sp Mcbs As Out Going With Tinned Copper Bus Bar , Neutral Link Earth Link Complete Make : Legrand Cat No 607721 57 Mcb Db Spn 12 Way, Acrylic Double Door Ip 43 Protection, 240 V, Ac 50Hz With For Mcb / RcboSdouble Pole As Incomer And Dp / Sp Mcbs As Out Going With Tinned Copper Bus Bar , Neutral Link Earth Link Complete Make : Legrand Cat No 607722Or Its Equivalent Make Given Here In After 58 Mcb Sp 6-32 Amps, C Curve 240 Volts 10 Ka 50 Hz Make : Legrand Cat 408587 To 408595Or Its Equivalent Make Given Here In After 59 Mcb Spn 6-32 Amps, C Curve 240 Volts 10 Ka 50 Hz Make : Legrand Cat 408609 To 408617Or Its Equivalent Make Given Here In After 60 RcboS Double Pole 32 Amps, 240 Volts 10 Ka 50 Hz Make : Legrand Cat 411326Or Its Equivalent Make Given Here In After 61 Mcb Tpn 40 Amps, C Curve 240 Volts 10 Ka 50 Hz Make : Legrand Cat 408681Or Its Equivalent Make Given Here In After 62 Mcb Tpn 63 Amps, C Curve 240 Volts 10 Ka 50 Hz Make : Legrand Cat 408683Or Its Equivalent Make Given Here In After 63 RccbS Four Pole, 40 Amps 415 Volts 30 Ma 50 Hz Make : Legrand Cat 411877Or Its Equivalent Make Given Here In After 64 Digital Type Timer Switch, 240 Volts, Quick And Easy Programming Due To The Option To Select Day / Weekly Programming Over View On Display Including Necessary Fixing Arrangements All As Directed By The Engr-In-Charge. Make Legrand Cat No.412631Or Its Equivalent Make Given Here In After 65 Modular Motor Starter, 16 Amps, 2 Module, Including Necessary Metal Box And Cover Plate All As Directed By The Engr-In-Charge. Make Legrand Cat No.673030Or Its Equivalent Make Given Here In After 66 Street Light Bracket Made Out Of 25Mm Dia Medium Grade Gi Pipe Of 1.5M Length Bent To Required Shape Including Fixing On Building Walls With Two Sets 25 X 4Mm Size Of Ms Clamps, Suitable Nuts &Boltsall As Specified And As Directed. 67 Tv / Sat / Fm 6 Shielded Socket , 2 Module Make: Legrandor Its Equivalent Make Given Here In After 68 Stainless Steel Letters Not Less Than 30Cm Heigh, 25Cm Wide And 20Mm Thick To Be Fitted On Vertical Surfaces Complete All As Specified And As Directed. 69 Ms Gate :Excavation In Hard Dense Soil, Pcc In Subbase, Rcc In Column / Post, Tmt Bars In Reinforcement, Mild Steel Work In Pintol Hinges, Rendering In Cement Mortar, Cement Base Painting To Plastered Surfaces, Supply And Fixing Ornamental Gate, Painting To Mild Steel Work, Rf&R And Removal Of Surplus Soil Etc Complete For Ms Gate Size 5.50M X 2.5M All As Specified And As Directed And Shown On Drawings.
Contract Date: May 04, 2023 Contract Value : ₹ 5.78 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Telangana View Result →
49.
Water Resources and Irrigation #1269653 AOC
Construction Of State Level Laboratory At Sidhpur In Tehsil Dharampur District Mandi ( Hp ) Providing, Supplying And Installation Of Various Equipments, Glasswares And Chemicals For State Level Laboratory , Schedule I :- Providing, Supplying And Installation Of Various Equipments Of Specified Make As Per Following Techincal Conditions, Sepecification And Requirement Complete Within All Respect As Per Direction And To The Entire Sartisfaction Of Engineer- In- Charge. , Ph Meter ( Both Lab Based And Portable Type ) , Digital Display ( 0-14 Range ) Of Hanna Instrument / Uk Makemeasure Ph, Mv And Temperature Automatic Calibration Auto Buffer Recognition Auto Temperature Compensation Range : 0-14 Ph Accuracy: +0.01 Accessories: Ph Electrode, Temperature Probe, Electrode Stand, Buffer Solution, Dust Cover & Manual, One Spare Combination Electrode , Tds / Conductivity Meter ( Both Lab Based And Portable Type ) , Direct Reading Digatal Display ( Ce Certified ) Of Hanna Instrument / Usa Makerange: 1 Micro S To 100 M S / Cm Accuracy: ± 1 % Of The F.S ± 1 Digit. Display: Led, 4 Digits For Conductivity, 3 Digits For Temperature Accessories. One Spare Conductivity Cell, Cell Constant 1.0 Temperature Probe, Electrode Stand, Dust Cover , Operation Manual , Nephelometer ( Turbidimeter ) , Direct Reading Range:0-100 Ntu Of Takahe Make Measurement Method Ratio Turbidimetric Determination Using A Primary Nephelometric Light Scatter Signal ( 90° ) To The Transmitted Light Scatter Signal. Light Source 2100Q: Tungsten Filament Lamp 2100Qis: Light-Emitting Diode ( Led ) @ 860 Nm Range 0 To 1000 Ntu ( Fnu ) , Digital Balance, Single Pan Cap. 200 Gr. Tarring Device Accuracy-0.0001 Gm Of Make• Capacity: 220G • Minimum Display:0.001G • Repeatability ( Standard Deviation ) : S=0.001G • Linearity: ±0.02G • Response Time ( Approx. ) :1.0-1.2 Sec • Ambient Temperature:5-40°C / 41-104°F • Temperature Coefficient Of Sensitivity ( 10-35°C ) :±3Ppm / °C • Pan Size ( Mm ) :100×100 ( Mm ) • Weight ( Approx. ) : 2.2 Kg • Power Requirements: Ac Adapter; 90V-264V, -15%-+10%, 50 / 60Hz • Standard Accessories: Simple Windbreak ( Brown Smoke Color ) • With Certificate From Legal Metrology Department , Uv-Visible Spectrophotometer, Should Cover Wavelength Of Important Of Klab / Shimadzu / Agilent / Analytic Jena / Perkin Elmer Or Equivalent Make Quantitative And Qualitative Analysis Of Organic And Inorganic Compound Including Pesticides, Heavy Metals Etc. In Ppm Level Brief Description Of Equipment Microprocessor Based Wavelength Range: 190 To 1100 Nm With Lcd / Led Display • System Should Be Double Beam Uv-Visible Spectrophotometer With 8-Cell Changer • The Monochromator Should Be Blazed Holographic Grating With 1200Lines / Mm, • The Detector Should Have Si-Diodes / Ccd Or Equivalent • System Shouldhave Wavelength Range From 190 To 1100 Nm Or Better • System Spectral Bandwidth Should Be 1 Nm ( 190 To 1100 Nm ) • Wavelength Setting Should Be 0.05 Nm • Wavelength Accuracy Should Be ±0.3 Nm • Wavelength Repeatability Should Be <± 0.1 Nm Or Better • Scan Speed Max 6, 000 Nm / Min Or Better • Photometric Range Absorbance : -4 To 4 Abs , • Transmittance Range Should Be : 0 % To 400 % • Photometric Accuracy Should Be Less Than ± 0.005 Abs At 1.0 Abs • Light Source Tungsten Halogen Lamp & Deuterium Lamp • Photometric Repeatability ± 0.0002 At 0.5 Abs • Baseline Stability: < 0.0003 Abs / H • Operating System ( Os ) : System Should Have Touch Screenand Windows 10 ( Embedded Pc ) Option Also. • Cuvettes With 3.5 Ml - 1 Pair Should Be Quoted. • Computer: Workstation With Processor Intel Core I5-4670 Processor ( 3.4Ghz, 6M Cache ) , Hdd 1Tb 7200Rpm, Graphics: Intel Hd Integrated Graphics, Memory 4Gb X 2 Dimm 1600Mhz, Optical Dvd Recordable, Wireless Wifi Operating System Window 7 Or Above, Cordless Mouse And Keyboard Should Be Quote . , Refrigerator, 295 Lts. Cap. ( Lg / Samsung ) Of Lg / Samsung Make Vertical Cooler ( With Front Glass Door ) Should Be Able To Maintain 4 C Capacity: 500 L Accessory: Voltage Stabilizer , Muffle Furnacefinishing: Powder Coated Material: Mild Steel Heating Range: Upto 1150 Degree Celsius Heating Space: 120 To 350 Cubic Inches Power: 230 V, 50 Hz, Single Phase , Voltage Stabilizer / Inverters Of Make ( 10Kw ) Online 20Kva Ups System With Isolation Transformerfor Uninterrupted Power Supply. , Electric Hot Plate ( Digital ) , Big Size Ce Certified Screen Type-Digital Plate Dimensions-300 X 300 Mm Heater Power-600 W Minimum Set Temperature-50 Deg C Display Resolution-1 Deg C Max Plate Temperature 300 Deg C , Heating Mantle, Cap. 1 Lt. Heating Mantle 1000Ml In 220 Volt Item Shape: Round Dimensions : 28.2 X 19.4 X 17 Cm; 1.58 Kilograms , Water Bath, Big Size ( 12 Hles ) Temp. 500 Degree To 1000 Degree Centigrade Ce Approved. 1. Double Walled Outside Made Of Of Ms Duly Powder Coated And Inner Chamber And Lid Made Of Stainless Steel. 2. The Gap Of 25Mm Between Outer And Inner Walls Is Insulated With Mineral Wool. The Top Of The Bath And The Concentric Rings Are Made Of Ss 304. 3. The Temp. Is Controlled By Thermostat / Microprocessor Based Pid Digital Temp. Controller. Temperature Range: Ambient To 100 Deg.C. 4. The Bath Is Provided With Two Indicating Lamps, Concentric Rings, On / Off Switch, Wire And Plug, Without Thermometer. 5. Capacity: 20 L 6. Temperature Range: Ambient To 100 C With Accuracy Of + 0.5 C , Hot Air Oven, Stadard Make- Big Size Double Walled, Outer Made Of Gi Duly Powder Coated And Inner Ss 304. Perforated Adjustable Shelves. With Provision To Keep Thermometer. Temperature Range ( + ) 50 To 250 Deg. Celsius, Accuracy ±1Deg, Controlled With Microprocessor Based Pid Controller. Fitted With Air Circulation Fan.Preferable Size- 455X455x605 Mm, 605X605x605 Mm. , Bacteriological Incubator, Temp. Control Device ( Range 0 To 50 Degree Centigrade ) Medium Size Ce Certified. Inner Chamber Sizes In Mm: W X D X H = 455 X 410 X 610, Capacity In Cu. Ft. : 4 Cu. Ft., Material: Inside Stainless Steel Chamber Epoxy Coated Outside Capacity Approx. : 112 Ltr., Range: 35 To 60 O C, Thermostatically Shelves: 3Nos. Controlled S.S. Camber, Co2 / Air Mixer Nozzle Is Provided , Autoclave, Medium Size Steel Cabinet Double Walled Construction, Outer Made Of Ss 304. Inner Chamber Made Of Ss 304 With Ss 304 Lid. Unit Fitted With Double Safety Radial Locking System With Paddle Lifting Device, Made Of Ms Chrome Plated, With Built-In Safety Valve, Pressure Gauge, Pressure Release Valve And Water Level Indicator. Pressure Adjustable From 5 Psi To 20 Psi With An Accuracy Of ± 1 Psi, With Automatic Pressure Control Switch. Supplied Complete With Stainless Steel Basket, Cord And Plug. The Autoclave Should Have Electrically Heated By Immersion Type Heaters Suitable To Work On 220 Volts Single Phase 50 Cycles. The Pressure Inside The Chamber Should Be Variable From 5 Psi. To 20 Psi Working Temperature: 121°C Hydrostatic Pressure: 2.5 Kg / Cm Sq. The Unit Is Fitted With Steam Release Valve, Spring Loaded Safety Valve , Water Inlet And Water Outlet Valves, Water Level Indicator , Pressure Gauge, Electrical Control Box, Fitted With Toggle Switch, Indicating Neon Lamps And Steam Release Valve, Paddle Lifting Device And Automatic Pressure Switch. Automatic Pressure Control Switch – To Cut-Off The Current From The Heating Elements, When The Desired / Set Pressure Value Level Is Attained Inside The Chamber And Restarts The Mechanism Once The Pressure Inside The Chamber Falls From The Desired Level. Automatic Water Cut-Of Device To Protect The Heaters From Running Dry And To Ensure That The Machine Is Automatically Switched Off In Case The Desired Water Level Falls Below The Prescribed Level. ( Optional ) Programmable Digital Temperature Indicator Cum Timer With Alarm System : Programmable Microprocessor Based Pid Digital Temp. Indicator Cum Controller With Digital Timer With Automatic Steam Release After Completion Of Cycle. , Magnetic Stirrer With Hot Plate, With Speed Control And Teflon Paddle Ce Certified, Beaker Capacity Up To 2000Ml, Rpm Up To 2000 Ml ( Without Load ) , Hotplate Temperature Ambient To 100°C, Heater: 230 Watts, Power: 220 / 230V Ac, Dimension 182 Mm X 235 Mm X 142 Mm, Rotor Magnet, Top Plate Size: 10 X 10 Cm, Top Plate Material: Ceramic , Microscope, Binocula Laboratory Binocular Microscope • Magnification - 50X – 1000X. • Observation - Binocular 45°, 360° Rotatable, With Interpupillary And Diopter Adjustment. • Stand - A Rigid & Heavy Stand. • Focusing - Coarse And Fine Focusing By Conveniently Placed Separate Knobs 1 Div. 0.002 Mm. • Stage - Horizontal Mechanical Stage 120 X 140 Mm. With Fine Vernier Graduation. Designed With Convenient Co–Axial Adjustment For Slide Manipulation Through 50 X 70 Mm. • Illumination - The Illuminator Incorporated 3W Led Lamp. • Condenser - Sub Stage Abbe Filter Holder N.A. 1.25 Condenser With Iris Diaphragm And Swing Out Filter Holder Focusable By Rack & Pinion. • Nose Piece - Quadruple Revolving Nose Piece With Positive Click Stops. • Objectives - Achromatic 5X, 10X, 45X & 100X Oil ( Sl ) . • Eye Pieces - W.F. 10X Anti Fungus Coated. ( Paired ) F.O.V.18 Mm. , Filter Paper 125Mm ( Pack Of 100 Pec. ) Pore Size: 20-25 ?M ( Particle Retention ) Material: Circles, Cotton Filters ( High-Quality Cotton Linters ) , Flame Photometer Elico / Kniss / Systronics / Pc Tech Make Display: 20 X 4 Line Alphanumeric Backlit Display. Range: Na, K, & Li 1-100 Ppm And Ca15-100 Ppm Dimensions-290 X 255 X 210 Mm ( L X B X H ) ( Approx. ) Flame System: Lpg Dry Oil Free , Vortex Shaker Variable Speed Control Max Speed 300 Ppm , Inductively Coupled Plasma-Mass Spectormetry ( Icpms ) Of Reputed Make Conforming To Iso / Ce Certified Standards. The Icp Mass Spectrometer For Heavy Metal And Other Elements Measurements In Drinking Water, Potable Water And Any Sample Matrix From Jal Shakti Vibhag. 1. Purpose- Analysis Of Trace Metals In Drinking Water & Ground Water As Per Bis, Fssai And Related Regulatory Guidelines. 2. Equipment Must Be The Latest Model And Design As Per The Internationally Approved Testing & Measurement Parameter. 3. Basic Design-Latest And Advanced Technology Bench-Top Icp-Ms With Cell Collision & Reaction Mode. The System Should Complete In All Respects With Built In Features Of Hardware & Software. 4. Sample Introduction – • Integrated Computer Controlled Minimum 3 / 4-Channel Peristaltic Pump. • Integrated Peltier Cooled Spray Chamber ( -5 To 20°C Or Or Better ) To Analyze All Kind Of Specified Samples And Comply All National And International Regulations. • Integrated Software Controlled Dilution: Should Have Suitable Automated Controlled Integrated Dilution With 10 Or More Fold Dilution Capability To Analyze All Kind Of Specified Samples And Comply All National And International Regulations. • Standard Kit To Be Offered Along With Splitter & Tubing Set 5. Plasma And Torch Setup • Rf Power Range:500-1600W Or Better • Rf Generator: 27 / 40 Mhz • Torch Alignment: X, Y, Z Automatic And Computer Controlled • Flow Controller: Should Have At Least 2 Or More Flow Controllers For Control Plasma, Auxiliary Makeup, Carrier Gases And Makeup / Dilution Gas. 6. Interface , • Cone Interface: Icpms System Must Have Single Cone Interface To Achieve All Guaranteed Performance Specifications Icp-Ms Instrument Without Any Manual Intervention Or Changeover For High Matrixes, High Sensitivity And High Tds Samples • Ion Lens: Off-Axis Ion Lens Or Suitable Design To Provide High Ion Transmission And Low Backgrounds To Deliver Superior Detection Limits, Sensitivity And Oxide Ratio. 7. Collision Reaction Cell • System Equipped With Best In Line Technology • Capable Of Operating In Standard ( No Gas ) , Collision Modes, Reaction Mode ( Pure Or Premix Gas Form ) Should Be Able To Remove Polyatomic Interferences As Per All National And International Regulations. • Fully Automated And Software-Controlled Changeover Between No Gas, Collision And Reaction Mode Without Any Manual Intervention • Separate Gas Lines With Dedicated Flow Controller For Collision And Reaction Gas With Automatic Control Must Be Supplied In Icp-Ms To Comply All National And International Regulations ( I.E. He, H2, O2, Ch4 & Nh3 ) , 8. Mass Analyzer And Detector • Quadrupole Must Be Minimum 2.5 Mhz Or Better • Mass Range: 5-258 Amu Or Better To Analyze All Elements. • True Linear Dynamic: 11 Orders <0.1Cps >10¹ºcps Or Better Without Any Hardware Interchange Or Software Adjustment • Dwell Time: 100 ?S Or Better • Scan Speed: >3000 Amu / Sfrom Li To U Plus40 Intervening Masses Or Better 9. Detection Limits: • Low Mass ( Be / Li ) : =0.5 Ppt Or Better • Mid Mass ( Y / In ) : =0.1 Ppt Or Better • High Mass ( Ti / Bi / U ) : =0.1 Ppt Or Better 10. Sensitivity: ( Guaranteed Factory Specifications Will Be Considered & Not The Typical Performance ) • Low Mass ( Be / Li ) :=55 Mcps / Mg / L Or Better • Mid Mass ( In / Y ) :=200 Mcps / Mg / L Or Better • High Mass ( Te / Bi / U ) := 250 Mcps / Mg / L Or Better • U Typical Sensitivity:= 300 Mcps / Mg / L Or Better • Oxide Ratio ( Ceo+ / Ce+ ) : <2% • Ba++ Or Ce++ / Ba Or Ce :<3 Or Better • Background Mass 4.5 / 9 / 220: No Gas <1 Cps • Short Term Stability :<3% Rsd Or Better , 11. Vacuum System- Suitable Turbo Molecular Pump, Corrosion Resistant And Protected. 12. Software- Windows Based Software User-Friendly That Guide Users Through Method And Sequence Development And Method Templates For Rapid Development Of Commonly Used Methods. ( The Quoted Software Should Be 21 Cfr, Part-11 With Qa / Qc Calculation Capacity & Minimum ( Two ) Offline License. 13. Standard Accessories Required I ) Autosampler: Minimum 200 Vials Or More Samples Capacity, Complete Sealed / Covered Enclosure. 1000Nos Vessel. Ii ) Setup And Detection Solutions: All Setup And Detection Solutions Quoted Should Be Certified, Traceable To Nist. Iii ) Nist Calibration Standards: A. 1643 Nist Traceable Standard For Trace Metals In Drinking Water , 500 Ml B. 23 Element Surface Water Standard , 250 Ml C. 22 Elements 6020 Epa Standard For Water , 250 Ml D. Tuning Solution, 125 Ml E. Genuine Licensed Software For Icpms And Iq Oq Documents F. Pc & Printer.Ms Office Should Be Offered. 14. Consumables ( All The Consumables Should Be Quoted & Specified With Oem Alongwith Specified Qualities. ) • Ni Sampler & Skimmer Cone ( 02 Sets ) • Standard Injector & Torch -05 Nos. • Standard Spray Chamber -03 Set • Standard Nebulizer: 02 Set , • Standard Peristaltic Pump Tubing For Drain Pk / 12 -15 Set • Standard Peristaltic Pump Tubing For Samples Pk / 12 -15 Set • Peristaltic Pump Tubing For Istd Pk / 12 -10 Set • Pfa / Suitable & Rinse Tubing -10 Set • Oil Element / Mist Filter -01Set • Pump Oil – 1 Ltrs • Tubing For Drainage -10 Set • Tubing For Reaction Cell Gas ( If Applicable ) , 1 / Pk ( 08 Nos ) • Rf Coil -02 Set • Cone Cleaning Solvent / Chemical -3.5 Ltr • Swab-Cotton Tipped Both Ends Pk / 100 – 3 Pac • Autosampler Vials -2000 Nos. • Autosampler Tubing Set P / 12 -05 Sets • Autosampler Probe: 02 Set • Tubing For Spray Chamber Drain -10 M • Fluid Filter For Chiller -02 Sets 15. Warranty- Three Years On Complete Supplied System From The Date Of Installation Along With Ups, Pc, Printer, Gas Panel. 16. Training - Three Days Training For Staff At Our Laboratory. Five Days Training At Vendor’S International Training Center Including Boarding, Lodging & Travelling Cost ( For Two Personals ) . 17. All Supporting Published Documents Must Be Enclosed For Specified Specifications, Along With Published Tender Specifications. 18 Price Must Be Quoted In Inr And F.O.R Site Including Clearance And Transportation. 19 User List Has To Be Attached For The Quoted / Equaling Model. , Uv Laminar Air Flow Chamber For Bacteriologicalanalysis. • Cabinet Is Fabricated Out Of The Stainless Steel 304 Grade • The System Is Microprocessor Based. The Microprocessor Displays The Inflow And Down Flow Air Velocities In Real Time On An Lcd Display. • Motor Automatically Adjust The Air Flow Speed To Ensure Continuous Safe Working Condition. Air Flow As Per Requirements Of Bio Safety Regulations In Respect Of Atleast Bsc Ii A Level Cabinet. • Noise Level Less Than 65 Decibel. • Efficiency Of Hepa Filter Is Almost 99.97%. • Working Table Made Of Ss 3004. • Front Of The Cabinet Shall Be Angled To Help Minimize Glair. • Fluorescent Lamps For Lighting Of The Interior Of The Cabinet. • Uv Light Is Also Fitted To Disinfect The Interior Of The Cabinet. Uv Light Shall Be Programmable To Allow For Specific Exposure Time From 0 To 24 Hrs. Automatic Uv Switch Off‘ On Opening Of Front Window. The Front Window Is Made Of Laminated Safety Glass To Protect Against Leakage Of Uv Rays And To Ensure Containment Of Potential Hazardous Material. • Safety Alarm / Safety Display For Low Air Velocity And Faulty Exhaust Fan. • Power Input 220-240 V Ac, 50 Hz Fitted With Indian Plug. • Movable Stand • Dimensions: 2’X2’X2’, 3’X2’X2’, 4’X2’X2’ And 6’X2’X2’ , Micronfiltration Assembly With A Vacuum Pump Of Borosil Make Chemical Duty Pump, 220 V / 50 Hz, Ac Powered And Source Of Vacuum To 585Mm / 23 Hg ( At Mean Sea Level ) Or Pressure To 4 Bar / 58 Psi For Filtration Of Liquids Or Other Continuous Or Intermittent Use With All Types Of Filter Holders , Plate Count And Colony Counter Of Stadard Make Digital Colony Counter For Quick And Accurate Counting Of Bacterial And Mould Colonies In Petri Dishes. It Should Be Designed For Rapid And Accurate Counting Of Bacterial And Mould Colonies. Simply Place The Petri Dish On The Illuminated Pad And Touch The Dish With The Pen Provided To Mark Each Colony In Turn. This Causes A Count To Be Registered On The Digital Display And Audible Tone Confirms Each Count Made. Marking The Dish With The Pen Avoids Missing Colonies Or Double Counting. The Digital Count On The Display Can Be Reset Manually Any Time By Pressing The Reset Key Provided. Optimum Viewing Of Colonies Is Aided By Peripheral Glare-Free Illumination. An Integral Magnifying Glass Provides For Easier Counting Of Small Colonies. Technical Specifications Display : 4 Digit, 9999 Max. Count ; 3 Digit, 999 Max. Count Dish Size : 110 Mm Magnification : X 1.7 Memory : 50 Test Counting Plate : Illuminated Wolfhugel Power : 230V-10% Ac, 50Hz, 40W Accessories : Marking Pen- 1 No. ; Magnifier Lens- 1 No. Salient Features Count Correction Facility 110 Mm Dia Magnifying Glass Audible Confirmation Of Each Count. Uniform Glare Free Illumination Digital Readout From 0-9999 Auto Maker Pen. , Lpg Burners & Fittings Isi Marked / Bis / Equivalent As Per The Site Layout And Drawing. , Field Kit ( Ph, Conductivity, Tds &Do ) System To Be Used For Water Quality Field Applications Measuring Simultaneously Two Of The Following Parameters: Ph, Conductivity / Tds & Dissolved Oxygen ( Do ) 1. It Should Be Waterproof Portable Logging Multiparameter Meter That Monitors Up To 12 Different Water Quality Parameters Including 6 Measured And 6 Calculated. 2. The Microprocessor Based Multi-Sensor Probe Allows For The Measurement Of Key Parameters Including Ph, Orp, Conductivity, Dissolved Oxygen, And Temperature. 3. The Probe Transmits Readings Digitally To The Meter, Where Data Points Can Be Displayed And Logged. 4. It Should Be Supplied With All Necessary Accessories And Packaged In A Durable Carrying Case. 5. It Should Have Minimum 12 Parameter Dot Matrix Display 6. Multi-Sensor Probe Should Be Quoted 7. Quick Calibration , Coolbox With Icepacks Ice Box Of 15Ltr Make: Cello Or Millton , Specific Ion Meter Along With Electrodes ( For Fluoride And Nitrate Etc. ) , Digital Portable Hach Equipment For The Measurement Of Fluoride, Nitrate, Lead, Cyanide And Silver Ions Concentration With The Following Specification Is Required. 1. The Equipment Should Be A Microprocessor Based Ph Ion Meter With Graphic Display Along With Suitable Sensors. 2. The Equipment Should Have A Graphic Lcd Screen, A Sensor Input To Connect Ph Or Ion Selective Electrode & A Socket To Connect A Pt1000 Or Ntc Temperature Sensor. 3. The Equipment Should Have The Facility To Determine The Content Of Ions Using Suitable Ion-Selective Electrodes.The Determinations Are To Be Performed By Establishing Calibration Curves And By Carrying Out Standard Additions. 4. The Instrument Should Have The Facility To Connect An Electronic Burette Directly For Standard Addition Purpose. 5. The Equipment Should Have The Facility To Automate The Standard Additions Using Suitable Dosing Device.It Should Have The Possibility Of Using At Least 15 Different Concentrations Of Standards For Calibration. 6. The Equipment Should Have The Facility To Perform Ph Measurement And The Calibration With Upto 9 Different Ph Buffers. 7. The Equipment Should Have The Facility To Connect And Control A Magnetic Stirrer Or A Rod Stirrer. 8. The Equipment Should Have The Facility To Simultaneously Display Ph And Temperature. 9. The Equipment Should Have A Drift Indicator With Graphic Display Plot Of Measured Value With Time For Ph, Mv, Temperature And Concentration. , 10. The Ph Ion Meter Provided Should Have The Following Measurement Range: Ph Range : From 0 To + 14.000 Potential : From –2200Mv To + 2200 Mv Temp Range :-150.0 Oc To +250.0 Oc Concentration :10-38 To 10+38 And The Following Resolution: Ph: 0.001 Mv:0.1 Mv Temperature: 0.1 Oc 11. The Equipment Should Have The Memory For Storing Minimum 100 Measured Values. 12. The Equipment Should Have Automatic Monitoring Of Validation, Service And Calibration Intervals. 13. The Equipment Should Have An Interface To Connect Pc Or Printer. 14. Instrument Should Be Supplied With Ion Selective Electrode For Ammonia, Nitrate, Chloride, Fluoride And Cyanide Ions Measurement, Along With Ag / Agcl Reference Electrode With Necessary Cables And Accessories.Suitable Electrode To Measure Ph Also Should Be Provided. , Fume Coup Board, Material-Stainless Steel Floor Area-0.75 M X 0.75 M Compressed Air Supply 2 Bar, 2.5 Cfm Electricity-1 Phase, 220 V, 50 Hz Ac , Extraction Thimble, Temperature Resistance-400 Degc Color-Transparent Material-Borosilicate Glass 3.3 Maximum Temprature Capacity 400 Degc Isi Marked / Bis / Equivalent , Digital Temp Sensor Digital Thermocouple With Led / Lcd Display. , Stop Watch Digital With Led / Lcd Display. , Thermometers Of Npn Make, Temperature Range -50.0 To 150.0 ºc / -58.0 To 302 ºf Temperature Resolution 0.1 ºc ( -50.0 To 150.0 ºc ) Temperature Accuracy ±0.2 ºc ( -30.0 To 120.0 ºc ) Automatic Shut-Off 8 Min ( Default ) , 60 Min Or Off Battery Type / Life 1 X Cr2032; Approx. 2000 Hours Of Continuous Use Environment -30 To 50 ºc ( -22 To 122 ºf ) , Weight Box, Stainless Steel Laboratory Weights Certified By Bis 1Mg To 200 Gm Class F1 ( 1Mg To 200 Gm ) , With Calibration Certificate From Nabl Certified Laboratory , Double Distillation Apparatus / Ultrapure Water Purification System To Provide Type1 / Type 11 Water For Sophisticated Instruments, Material: Stainless Steel Capacity:1.5 Litre / Hr, 2000 W. Power Supply: 220Vac ± 25%, 47 To 53 Hz Protection: Automatic Power Cut Off At Low Water Level Conductivity: The Conductivity After Distillation Shall Be Equal To Or Less Than 0.01Ms / Cm At 25Oc , Bulb Rubber ( 10Mm ) Isi Marked / Bis / Equivalent , Kjeldal Distillation Apparatus, Kjeldahl Apparatus Is Used To Determine Organic Nitrogen ( N2 ) And Protein Contents In Water Samples And Chemical Substance. Units Of Test-6 Test Heater-Mantle Type Flask Capacities-300 Ml / 500 Ml Max. Temperature-350°C Rating-200 Watts Construction-Ms Powder Coated Accessories - Glass Ware - Clamps - Lead Fume Duct - Condenser Rack , Bulb Rubber ( 20Mm ) Isi Marked / Bis / Equivalent , Bulb Rubber ( 25Mm ) Isi Marked / Bis / Equivalent , Pcr Mechine, Preferable Specifications: • Sample Capacity 96X0.2Ml Pcr Tube, 8X12 Pcr Plate Or 96 Well Plate • Heating Temperature Range 4-105? • Lid Temperature Range 30-110? • Temperature Display Accuracy ±0.1? • Temperature Control Accuracy [ At 55? ] ±0.3? • Temperature Uniformity [ At 55? ] <0.3? • Max. Heating / Cooling Rate 5?Sec • Gradient Temperature Setting Range 30-99? • Gradient Range 1-42? • Adapter Block Material Aluminum • Display 7” Lcd 800X480 • Input Touch Panel • User Defined File System Max. 30 Segments 99 Cyclesmax. 16 Folder And 16 Files Each Folder • Power Off Protection Yes , Deep Freezer ( -20 Oc ) , Ce Certified, Vertical Deep Freezer ( -20 C ) Digital / Mechanical Temperature Control, Alarm System, Environmental Friendly. Capacity280 Ltr. Or More, Cfc Free Refrigerant, Microprocessor Controlled Temperature, Caster Wheels, Voltage Stabilizer, Rs 232 / Rs 485 Interface For Temperature, Date And Time.Accessory: Voltage Stabilizer , Micropipette ( 10Ml ) Of Borosil Make, Isi Marked, A Class, Variable Volume Air Displacement Single Channel Pipettes Requiring Both Precision And Accuracy. 1-5 Ml And 1-10 Ml And Stand Different Size. , Centrifuge, Labpro Centrifuge • General Purpose Bench Top Laboratory Centrifuge Machine. • Heavy Duty Crc Construction Finished With Powder Coating. • Double Walled Abs Injection Moulded Lid Which Is Light Weight To Avoid Accident. • Inter Lid Lock And Metallic Centrifuge Bowl For Safety. • 2 Lines Of 16 Character Lcd Display Of Rpm, Rcf, Set Time And Run Time. • Microprocessor Based Programmable Speed Control From 500 To 5200 Rpm Depending Upon The Type Of Rotor And Digital Timer ( 0-59 Minutes ) . • Last Test Parameter Recall And Display Automatically On Lcd. • Low Noise, Smooth And Soft Start And Stable Speed Output. • Wide Variety Of Rotors And Reduction Adopters Available On Demand At Extra Cost. • The Lid Is Light In Weight To Avoid Accident Due To Heavy Weight Metallic Lids During Operations. • Motor Fitted On Anti Vibration Spring Pads. Supported With Rubber Covering From Inside And Outside. • Maximum Speed 5250 Rpm • Maximum Rcf ‘G’ 3600 • Maximum Capacity 400 Ml • Motor Universal Motor ( Fitted With Carbon Brushes ) With Rotor Should Be Quoted. , Reflux Apparatus / Cod Digester, Multi Parameter Photometer, With Cod Digester / Reactor. The Benchtop Photometer Should Measures 36 Different Key Water And Wastewater Quality Parameters Using Different Methods That Allow For Multiple Ranges And Variations In Chemistry For Specific Applications • Should Have Digital Ph Electrode Input Allowing The User To Measure Ph By A Traditional Glass Electrode With Built In Microchip Within The Probe That Stores All Of The Calibration Information • System Should Have Silicon Photodetector For Absorbance Measurement • Chemical Oxygen Demand Resolution 1Mg / L • Cod Test Tube Heater Should Have Two Predefined Temperature Profiles: 150ºc And 105ºc Selectable By User. • The Entire Temperature Range Should Be -10°C To 160°C • Cod Tube Heater Should Have 25 Well Position For 25 Samples. • Cod Reactor Should Have Built In Temperature Alert, Timer And Status Indicator Light. • In Addition To The 25 Vial Capacity Of The Aluminum Heating Block, A Small Well Is Available For A Temperature Probe For Users That Wish To Verify Their Heating Block. • System Should Have Lcd Display , Bulb Rubber ( 50Mm ) Isi Marked / Bis / Equivalent , Burette Stand Of Borosil Make, Low Expansion Borosilicate I.D. Control Tubing. Ÿ Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1997 And Iso 385. Supplied With Ptfe Stopcock, Boroflow Stopcock And Straight Bore Glass Stopcock , Spatula S.S., 200 Mm, Compatible For Analytical Grade Use, Isi Marked / Bis / Equivalent , Gas Chromatography-Mass Spectrometry ( Gc-Ms ) Of Reputed Make Conforming To Iso / Ce Certified Conforming To International Standards1.Gas Chromatography: A. Gc Oven • Temperature Range- 4 Deg Above Ambient To 450°C • Ramp Rate- 120°C / Min. Or Better • Heating Ramps Atleast 20 Ramps / Programming Steps Or More. Cooling Ramps Also Required To Cool Down Gc • Cooling-Fast Cooling Of Oven 450 To 50 Deg C Within 4-5 Minutes Or Faster 2. Gc Inlets - 2 Nos Of Split / Splitless Injector – 1 No. And Programmable Temperature Vaporizer ( Ptv ) - 1 No. • Temperature Range Up To 4000C Or Better. • Split Ratio Setting Range: Up To 7500 Or More • Pressure Setting Range: 0 To 145 Psi Or Better For Split / Splitless And 0 To 100 Psi Or Better For Ptv With Increment / Resolution / Control Of 0.001 Psi For The Entire Pressure Range • Compatible Columns With Different Internal Diameters From 0.1 To 0.53 Mm Or Suitable For All Capillary Columns ( 50 To 530Umi.D. ) 3. Gas Saver Mode To Reduce Gas Consumption, Electronic Septum Purge 4. Electronic Pressure / Flow Control: The Pressure And Flows Must Be Independently Controlled For All Injectors And Detectors Through Software Only. System Should Have Constant Pressure, Constant Flow. , 5. Auto-Sampler: Liquid Auto-Sampler With 100 Vials Capacity, For 2 Ml Vial Capacity 6. Ms Specifications: Fully Pc Controlled Mass Spectrometer With Highly Efficient Turbo Molecular Pump With Ei • Mass Analyzer: Single Quadrupole Mass Filter With Pre-Filter / Pre-Rod, Compatible With 0.1 To 0.53 Mm Id Columns For Various Samples / Applications Or Heated Quadrupole • Mass Range: 10 To 1050 Amu Or Better • Scan Speed: 20, 000 Amu / Sec Or Better • Mass Resolution: Unit Or Better • Mass Axis Stability- Should Be + / - 0.10 U / 48 Hrs Or Better. • Ei Voltage: Up To 150 Ev Or More • Ionization / Emmission Current: Variable 10-150 ?A Or Better • Ionization Mode: Electron Ionization • Sensitivity ( Signal / Noise ) : Ei Scan: 2000:1 S / N For 1 Pg / ?L Ofn ( To Be Demonstrated At The Time Of Installation ) Or Idl ( Instrument Detection Unit ) In Ei Sim Mode, With Helium Carrier Gas And 8 Sequential 10Fg Ofn Splitlers Injection, Monitored For M / Z-272 To Produce Following Idl= 10Fg Or Better • Pumping System: Highly Efficient Turbo Molecular Pump With Minimum Capacity Of 250 Liter / Sec Or Higher To Build Vacuum And To Evacuate System As Soon As Possible ( As Per System Requirement ) • Libraries ( Original ) : Vendor To Quote Following Original, Licensed & Latest Version Of Library / Database With Oem Part / Catalogue Number: Nist 2020 Or Latest , 7. Software: 64 Bit Advanced Chromatographic Integration Software. Software Should Be User Friendly & Simple For Data Handling With Feature Like Easy To Use Report Publisher, Online Help And Answer Wizard, Glp And Fully Compatible With Windows 10. Simultaneous Scan / Sim Mode. Software Should Have Provision For Calculation Of Retention Indices And Retention Time Alignment / Automatic Adjustment Of Retention Time / Retention Time Locking Software With Part Number. All Accessories Like Injectors, Detectors, Gc, Ms, Auto-Sampler, Should Be Controllable From A Single Software Only. ( Complete Controll Of Perameters For Gc ) 13 Additional Consumables A ) Injection Port Septa – 400 Nos. B ) Glass Insert For Split & Splitless ( 10 Nos. Each ) C ) Vespel Ferrule 0.4 Mm – 30 Nos. D ) Vespel Ferrule 0.5 Mm & 0.7 Mm – 10 Nos. Each E ) Graphite Ferule 0.5 Mm – 10 Nos. F ) Graphite Ferule 0.8 Mm – 10 Nos. G ) Manual Syringes - 10 Ul ( 5 Nos. ) H ) Liquid Auto-Sampler Syringes – 10 Nos. I ) Auto-Sampler Vial & Septa - 1000 Nos. J ) Filaments – 6 Nos., Glass Wool – 1 No. K ) Column Cutter – 1 Nos., O-Ring – 50 Nos. L ) Column Nut – 20 Nos., Pump Oil – 5 Liters 14 Utilities: A ) 30-Meter Capillary Columns ( Rxi-5Silms – 2 Nos. Or Equivalent ) , Rtx-200 / 17 – 1 No., Rtx-624 – 1 No. Or Equivalent , B ) Gas Cylinders With Dual Stage Regulators For Helium – 2 Nos. Each C ) Wall Mount Gas Purification And Control System For Gases, Gas Manifold D ) Branded I7 Pc, 8 Gb Ram 1 Tb Hdd, Windows 10 Pro, 32-Bit Ms Office Excel 2016, 21” Monitor And Laserjet Printer E ) 10 Kva Online Ups With 60 Min Back Up For Complete System 15. Accessories For Sample Preparation: • Microprocessor Controlled Ultrasonication Bath With Tank Capacity: Approx. 4 Ltr. Stainless Steel With Digital Timer And Speed With One-Year Warranty • Vortex Mixer Of Reputed Make And N2 Evaporator Of 20-25 Sample Processing Capacity. Warranty: 1 Year • Rotary Evaporator With Vacuum Pump, Vacuum Controller And Chiller • Micropipette- 1Ml To 10Ml, 0.1 Ml To 1.0 Ml, 0.02 Ml To 0.2 Ml, 0.002 Ml To 0.02 Ml • Refrigerated Centrifuge Of Reputed Make With 15 Ml And 50 Ml Rotor. Warranty: 1 Year • Balance With Least Count Accuracy Of 0.1Mg • Refrigerator For Storage Of Crms, Ph Meter, Hot Air Oven • Solvent Filtration Kit With Vacuum Pump And Syringe Filter • Water Purification System Type I & Iii 16. Warranty: Two Years Warranty On Gc-Ms System , Schedule Ii :- Providing, Supplying And Installation Of Various Glasswaress Of Specified Make As Per Following Techincal Conditions, Sepecification And Requirement Complete Within All Respect As Per Direction And To The Entire Sartisfaction Of Engineer- In- Charge.. , Conical Flaskof Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 100 Ml , 250 Ml , 500 Ml , 1000 Ml , Beakers Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 100 Ml , 250 Ml , 500 Ml , 1 Lt , 2 Lt , Pipette ( Without Graduation ) Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 5 Ml , 10 Ml , 20 Ml , 25 Ml , 50 Ml , 100 Ml , Pipette ( Graduated ) Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 1 Ml , 5 Ml , 10 Ml , 20 Ml , Burette ( Ordinary ) Of Borosil Make, A Class, Accuracy: ±0.05 Ml, Clear Borosilicate Glass And Stand , 25 Ml , 50 Ml , 100 Ml , Burette ( Automatic ) Of Borosil Make, Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. , 50 Ml. , Desiccators Of Borosil Make, Material: Borosilicate Capacity: 6-5400 Ml Beaker Temperature Resistance: 570 M Ohm , Reagent Bottles Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 100 Ml. , 250 Ml. , 500Ml. , 1 Ltr , 2 Ltr , Sample Bottles ( Food Grade Plastic ) Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 250 Ml. , 500 Ml. , 1 Ltr , 2 Ltr , Test Tube Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , Durham Tubes Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , Round Bottom Flask Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent. Temperature Resistance-400 Degc, Color-Transparent, Material- Borosilicate Glass 3.3 , 250 Ml. , Measuring Cylinders ( Graduated ) Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 10 Ml. , 50 Ml. , 100 Ml. , 250 Ml. , 500 Ml. , 1 Ltr , 2 Ltr , Measuring Flask Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 5 Ml , 10 Ml. , 25 Ml , 50 Ml , 100 Ml. , 250 Ml. , 500 Ml. , 1000 Ml. , Funnels Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 3 Dia , 4 Dia , 5 Dia , Porcelain Dish Of Borosil Make, Compatible For Analytical Grade Use , Mediun Size, 80 Mm, Glassware Isi Marked / Bis / Equivalent , Big Size, 105 Mm, Glassware Isi Marked / Bis / Equivalent , Crucibles, Compatible For Analytical Grade Use, Isi Marked / Bis / Equivalent, Capacity ( Ml ) : 50Ml, Shape: Circular, Type Of Glassware: Silica , Bucher Funnel Muslin Cloth Dishes, Compatible For Analytical Grade Use , 100 Ml , 500 Ml , 1000 Ml , Stadard Joints Of Borosil Make, Compatible For Analytical Grade Use, Isi Marked / Bis / Equivalent , Grouted , Bends , Glass Roads, Compatible For Analytical Grade Use, Isi Marked / Bis / Equivalent , Glass Beads, Compatible For Analytical Grade Use, Isi Marked / Bis / Equivalent , Nessler Cylinders Of Borosil Make, Should Be Made From Low Expansion Borosilicate I.D. Control Tubing. Individually Calibrated By Automatic Calibration Process. Comes With Highest Quality Standard According To Is 1042. Compatible For Analytical Grade Use. Isi Marked / Bis / Equivalent , 50 Ml. , 100 Ml. , Thermometers Of Npn Make, Compatible For Analytical Grade Use, Isi Marked / Bis / Equivalent , 100°C , 250°C , 500° C , Wash Bottle Of Borosil Make, Should Be As Per The Bis / En / Astm Norms And Should Be Fully Compatible With The Analytical Grade Use For Analytical Instruments. , Separating Flask Of Borosil Make, Should Be As Per The Bis / En / Astm Norms And Should Be Fully Compatible With The Analytical Grade Use For Analytical Instruments. , Bod Bottle, Compatible For Analytical Grade Use, Isi Marked / Bis / Equivalent, Capacity-500 Ml, Usage / Application-Chemical Laboratory, Material: Glass, Isi Marked / Bis / Equivalent , Separatory Funnels, Compatible For Analytical Grade Use, Isi Marked / Bis / Equivalent, Material-Glass, Capacity-1000Ml, Usage / Application-Chemical Laboratory, Stop Cock Bore-Yes, Isi Marked / Bis / Equivalent , Petri Dishes Of Borosil Make, Should Be As Per The Bis / En / Astm Norms And Should Be Fully Compatible With The Analytical Grade Use For Analytical Instruments. , Pressure Vessel ( 50 Ltr Capacity ) Of Borosil Make, Should Be As Per The Bis / En / Astm Norms And Should Be Fully Compatible With The Analytical Grade Use For Analytical Instruments. , Stoppered Bottles For Dissolved Oxygen Of Borosil Make, Should Be As Per The Bis / En / Astm Norms And Should Be Fully Compatible With The Analytical Grade Use For Analytical Instruments. , Schedule Iii :-Providing, Supplying And Installation Of Various Chemicals Must Be Analytical Grade Only, Should Be Supplied With Msds And Safety Certificate As Per Following Techincal Conditions, Sepecification And Requirement Complete Within All Respect As Per Direction And To The Entire Sartisfaction Of Engineer- In- Charge. , Acetic Acid, Glacial, 500 Ml , Alizarin Red S, 500 G , Ascorbic Acid, 100 G , Absolute Alcohol, 500Ml , Aluminium Potassium Sulphate, 500G , Ammonium Acetate, 500G , Ammonium Chloride, 500G , Ammonium Hydroxide, 500G , Ammonium Purpurate / Muroxide, 100G , Arsenis Trioxide, 500G , Barium Chloride, 500G , Bromocresol Green Indicator, 100G , Boric Acid, 500G , Calcium Chloride ( Fused ) , 500G , Calcium Chloride, 500G , Ethylenediaminetetraacitic Acid ( Edta ) , 500G , Erichrome Black T, 10G , Erichrome Cyanine: R, 10G , Ferrous Ammonium Sulphate, 500G , Hydrochloric Acid, 2.5 L , Hydroxylamine Hydrochloride, 500Ml , Hydrogen Peroxide, 500Ml , Electrolytic Iron, 100G , Lead Acetate, 500G , Methyl Orange Indicator / P & R Indicator, 100G , Phenolphthalein Indicator / Methyl Red Indicator, 100G , Potassium Hydroxide, 500G , 1-10, Phenanthroline, Monohydrate, 10G , Potassium Permanaganate, 100G , Potassium Iodide, 500G , Potassium Chromate, 500G , Potassium Hydrogen Phthalate, 500G , Stannous Chloride, 100G , Silver Diethyl-Dithio-Carbamate, 100G , Sodium Hrdroxide, 500G , 4-Aminoantipyrine, 25G , Sodium Acetate, 500G , Sodium Thiosulphate, 500G , Starch ( Soluble ) , 500G , Sodium Fluoride ( Anhydrous ) , 500G , Sodium Arsenate, 100G , Spadns, 100G , Zirconyl Oxycloride, Octohydrate, 100G , Sodium Sulphate ( Anhydrous ) , 500G , Sulphuric Acid ( Sp. Gr.1.84 ) , 2.5 L , Sulphuric Acid Fuming ) Oleum ( If Specifically Required ) , 250G , Sodium Chloride, 500G , Potassium Dicromate, 500G , Calcium Carbonate ( Anhydrous ) , 500G , Phenol, Whte, 500G , Potassium Nintrate, 500G , Sodium Sulphate, 500G , Phindicatorpapre, Range 2-14 With Comparator , Methylated Spirit, 500G , Macconkey Broth, Dehydrated ( Hi-Media ) , 500Ml , Total Ionic Strength Adjustment Buffer ( Tisab ) , 500Ml , Oxalic Acid, 100G , Silver Sulphate, 100G , Aluminium Chloride, 500G , Alkaline Citrate, 50Ml , Ammonium Molybdate, 100G , Nitric Acid , Ammonium Metavanadate, 100G , Anhydrous Potassium Nitrate, 100G , Sulphanilamide, 100G , Sodium Nitrate, 100G , Sodium Oxalate, 100G , Sodium Meta Silicate Nanohydrate, 100G , Sodium Bicarbonate, 100G , Sodium Borate Decahydrate, 100G , Sodium Tetraborate, 100G , Glycerol, 100Ml , Potassium Cloride, 100G , Carmine Reagent, 100G , Ammonium Solution, 100Ml , Mercury Sulfate, 100G , Silver Nitrate, 250G , Sodium Bisulphate, 100G , Sodium Acetate, 500G , Zinc Metal, 100G , Aluminium Hydroxide, 500G , Zincon ( 2-Carboxy-2-Hydroxy-5-Sulfoformazyl Benzene ) , 100G , Methanol, 500Ml , Phosphoric Acid, 100Ml , Anhydrous Potassium Bi-Iodate, 100G , Chloroform, 500Ml , Ethyl Ether, 500Ml , Anhyprous Potassium Bromide, 100G , Aluminium Nintrate, 500G , Alkylbenzene Sulfonate ( Las ) Solution, 100Ml , Methylene Blue, 10G , Sodium Phosphate, Monobasic, Monohydrate, 100G , N-Hexane, 100Ml , Petroleum Ether, 100Ml , M-Endo Agar, 500G , M-Fc Agar, 500G , Emb Agar, 500G , Macconkey Agar, 500G , Tcbs Agar, 500G , Xld Agar, 500G , Bismuth Sulphate Agar, 500G , Salmonella Shigella Agar, 500G , Kf Streptococcus Agar , 500G , Mannitol Salt Agar, 500G , Lactose Lauryl Trptose Broth, 500G , Ethyl Alcohol, 500Ml , Rosolic Acid, 100Ml , Bromocresol Purple, 100Ml , Ttc Solution, 100Ml , Brilliant Green Bile Growth, 100Ml , E.C Broth, 100Ml , Luaryl Sulphate Broth, 100Ml , Phosphiric Acid 5% H3p04, 500Ml , Anhydrous Kbr03, 500G , Sodium Arsenite ( Naas02 ) , 500G , Urea, 500G , Antimony Metal, 1G , Choromotropic Acid, 100G , Devard S Alloy, 10G , Borate Buffer, 500Ml , Anhydrous Sodium Sulphate, 500G , Ccl4, 500Ml , Dithiozone Solution, 500Ml , Nh4cns, 500G , Agn03 Anhydrous, 100G , Kh2p04, 500G , Potassium Ferricyanide K3fe ( Cn ) 6, 500G , Azomethane, 500G , Silver Diethyl-Dithiocarbamate Agscsn ( C2h5 ) 2, 500G , Ammonium Or Postassium Sulphate, 250G , 2-3 Diaminonaphtheline ( Dan ) Solution, 500Ml , Hydroxylamine Sulphate, 500G , Sodium Nitroprusside, 500G , Trisodium Citrate, 500G , Phosphate Buffer, 500Ml , Ferroin Indicator, 250Ml , Fire Extinguisher 6.00 Kg , Anhydrous Calcium Carbonate, 500G , Anhydrous Disodium Hydrogen Phosphate, 500G , Borax, 500G , Bromcresol Green Indicator, 5G , Carmine Stain, 25G , Chloramine T Solution 500 G , Chloroform, 2.5L , Cobalt Chloride, 500G , Crm Aluminium From Nist Al ( No3 ) 3 In Hno3 0.5 Mol / L 1000 Mg / L Al 500Ml, , Crm Antimonyfrom Nist Sb2o3 In Hcl 2 Mol / L 1000 Mg / L Sb 500Ml, , Crm Arsenic 250Ml , Crm Barium 250 Ml , Crm Cadmium From Nist Cd ( No3 ) 2 In Hno3 0, 5 Mol / L 1000 Mg / L Cd 500Ml , Crm Copper From Nist Cu ( No3 ) 2 In Hno3 0, 5 Mol / L 1000 Mg / L Cu 500Ml , Crm Leadfrom Nist Pb ( No3 ) 2 In Hno3 0.5 Mol / L 1000 Mg / L Pb 500Ml, , Crm Mercuri , Crm Molebdenumfrom Nist ( Nh4 ) 6Mo7o24 In H2o 1000Mg / I Mo 100Ml , Crm Nickel From Nist Seo2 In Hno3 0, 5 Mol / L 1000 Mg / L Se 100Ml , Crm Selinium From Nist Seo2 In Hno3 0, 5 Mol / L 1000 Mg / L Se 500Ml , Crm Silverfrom Nist Agno3 In Hno3 0, 5 Mol / L 1000 Mg / L Ag 500Ml , Crm Total Chromium From Nist Cr ( No3 ) 3 In Hno3 0, 5 Mol / L 1000 Mg / L Cr 500Ml, , Crm Zinc From Nist Zn ( No3 ) 2 In Hno3 0, 5 Mol / L 1000 Mg / L Zn 500Ml , Diatomaceous Silica Filter Aid Suspension , Dichloromethane, 2.5L , Diisopropyl Ether 500Ml , Dipotassium Hydrogen Phosphate, 500G , Disodium Hydrogen Phosphate, 500G , Ferric Chloride , Ferric Sulphate, 500G , Glacial Acetic Acid Ar, 500Ml , Glucose, 500G , Hexa Methylene Tetramine, 500G , Hydrazine Sulphate, 500G , Hydrochloric Acid, 2.5L , Hydrofluoric Acid, 500Ml , Lead Carboante, 500G , L-Glutamic Acid, 100G , M002-500G-Nutrient Broth , M043-500G-Baired -Parker Agar , M052-500G-Selenite F Broth , M121i-500G-Brilliant Green Agar , M189-500G-Thiosulphate- Citrate Bile Salt Sucrose Agar ( Tcbs ) , M1991i-100G-Chromogenic Coliform Agar , M612-500G-Slantez And Bartlety Medium , M614-500G-Buffered Peptone Water , M618-500G-Alkaline Peptone Water , M739-500G-Bile Salt Agar , Magnesium Chloride, 500G , Magnesium Salt Of Edta, 500G , Magnesium Sulphate Ar, 500G , Manganous Sulphate, 500G , Mercuric Sulphate, 100G , Mercury Chloride, 100G , Metacresol Purple Indicator, 5G , Di-Potassium Phosphate, 500G , Tert Butyl Methyl Ether, 500Ml , 1-2 Dibromopropane, 100G , 2- Propanol, 500Ml , 2, 4- Dichlorophenylacetic Acid, 25G , 2, 4, 6- Trichlorophenol, 500G , 4, 4- Dibromooctafluorobiphenyl, 1G , Acetone, 500Ml , Acetonitrile Hplc Grade, 1L , Anhydruous Sodium Carbonate , Bromodichloromethane 500Ml , Bromoform Ar, 250Ml , Carbazole, 100G , Carbitol ( Diethyl Glycol Monoethyl Ether ) , 1L , Cupric Sulphate Ar, 500G , Cyclohexane Ar, 500Ml , Decachlorobiphenyl, 100Mg , Dftpp Standards, 100Mg , Diazide 25G , Dibromochloromethane , Dodecylbenzene Sulphuric Acid Methyl Esther , Ethanolic Sodium Hydroxide 500G , Ethyl Acetate Ar, 500Ml , Diethyl Ether Ar, 500Ml , Extraction Solvent ( Pentane / Hexane ) , Florisil, 100G , Helium Gas Carrior , Hydrochloric Acid Ar, 500Ml , Isooctanol ( 2-Ethyl Hexan-1-Ol ) , 500Ml , Mercuric Chloride, 25G , Methyl Alcohol 500 Ml , Tert Butyl Methyl Ether Ar, 500Ml , Methylene Chloride ( Dichloromethane ) , 500Ml , Monuron, 100Mg , Pentachloronitrobenzene, 25Mg , Phenophthalein Indicator, 125Ml , Phosphoric Acid Ar, 500Ml , Potassioum Hydroxide Ar, 500G , Potassium Phosphate Ar, 500G , Silica Gel, 500G , Silicic Acid, 250G , Sodium Thiiosulphate Ar, 500G , Sodium Dihydrogen Carbonate Ar, 500G , Sodium Hydroxide Ar, 500G , Sodium Thiosulphate Ar, 500G , Toulene Ar, 500Ml , Trimethylesilyldiazomethane 25Ml , Triochloroethane, 500G , Tris Hcl, 500G , Tris Hydroxy Methyleamino Methane, 500G , Argon ( Commercial Grade ) 5Ltr , Ammonium Acetate Buffer, 1Kg
Contract Date: Nov 23, 2022 Contract Value : ₹ 3.01 Crore
Government Departments No of Bidders 3
Himachal Pradesh View Result →
50.
Health and Family Welfare #1223701 AOC
Tender For Supply Of Medicine/Consumable For Hamidia Hospital Tender For Supply Of Medicine/Consumable/Kits/Chemicals For Hamidia Hospital Bhopal , Name Of Tab/Cap. , Aceclofenac 50Mg. , Acelofenac 100Mg , Acelofenac 200Mg , Acetazolamide 250 Mg , Acitrom 0.2Mg , Acitron1 Mg. , Acitron2 Mg. , Acitron4 Mg. , Acyclovir 200 Mg. , Acyclovir 400 Mg. , Acyclovir 800 Mg. , Albendazole 100Mg , Albendazole 200Mg , Albendazole 400 Mg , Alectinib 150Mg , Alfacalcidol 0.25 Mcg , Allopurinol 100 Mg , Alprazolam 0.25Mg. , Alprazolam 0.5Mg. , Amiodarone 100Mg. , Amiodarone 200Mg , Amisulpiride 100 Mg , Amisulpiride 50 Mg , Amitriptyline 25 Mg , Amitriptyline 75 Mg , Amlodipine2.5Mg. , Amlodipine5mg. , Amlodipine 5 Mg+ Atenolol 50Mg , Amoxycillin 250Mg. , Amoxycillin 500Mg , Amoxycillin Dispersible 125Mg , Amoxycillin Trihydrate Dispersible , Amoxycillin+Clavulanic Acid (250Mg+125Mg) , Amoxycillin+Clavulanic Acid (500Mg+125Mg) , Ampicillin 250 Mg. , Ampicillin 250Mg.+Cloxacillin 250 Mg. , Ampicillin 500 Mg. , Anastrozole , Artemether+ Lumefantrine , Artesunate( 3 Tab)20 Mg And 2 Tab Ofsulphadoxime 7500 Mg+ Pyrimethamine 37.5 Mgtab Ip ( Age Group 15 Oe Above) , Artesunate100 Mg.( 3 Tab) + Sulphadoxime 750 Mg (1 Tab) + Pyrimethamine 37.5 Mg Ip Tab (1 Tab) ( Age Group Between 9 To 14 Year) , Artesunate100 Mg.( 3 Tab) + Sulphadoxime 750 Mg + Pyrimethamine 37.5 Mg Ip Tab ( 1 Tab) ( Age Group Between 5 To 8 Year) , Artesunate50 Mg.( 3 Tab) + Sulphadoxime 500 Mg (1 Tab) + Pyrimethamine 25 Mg Tablets ( Age Group Between 1-4 Year) , Artesunate 60 Mg. , Asprin 150Mg. , Asprin 325 Mg. , Asprin 75Mg. , Atenolol 100Mg. , Atenolol 25Mg. , Atenolol 50Mg. , Atezolizumab 1200Mg , Atorvastatin 10 Mg. , Atorvastatin 10 Mg.+Fenofibrate 145Mg , Atorvastatin 10 Mg.+Fenofibrate 160Mg , Atorvastatin 20 Mg. , Atorvastatin 40 M G. , Aviraterone 250Mg , Azathioprine 50Mg. , Azithromycin 250 Mg. , Azithromycin 500 Mg. , B.Complex Nfi(Prophylactic) , Baclofen 10 Mg , Betahistine 16 Mg , Betahistine 8 Mg , Betamethasone1mg , Betamethasone 0.5Mg , Bisacodyl 5Mg. , Bisoprolol 5Mg , Brivaracetam 100Mg , Brivaracetam 50Mg , Brivaracetam 75Mg , Buperonorphin Sublingual 0.2Mg , Calciumcitrate Usp 1200 Mg Equivalent To Elemental Calcium 252Mg & Calcitriol Bp 0.125 Mcg Overages Of Calcitriol Added. , Calcium D3/500Mg. , Capecitabine 500Mg , Carbamazepine200mg , Carbamazepine400mg , Carbamazepine Sr 100Mg , Carbimazole 5 Mg. , Carvedilol 12.5 Mg , Carvedilol 6.25 Mg , Cefalexin 200Mg , Cefalexin 250Mg. , Cefalexin 500Mg , Cefalexin Dispersible 125 Mg , Cefazolin 100Mg , Cefazolin 50Mg , Cefixime50mg Dt , Cefixime 100Mg. Dt , Cefixime 200Mg. , Cefpodoxime200mg. , Cefpodoxime50mg. , Cefpodoxime Proxetil 500Mg. , Cefuroxime 500 Mg. , Cenarizine 10 Mg , Cenarizine 25Mg , Cetirizine 10 Mg. , Cetirizine 5Mg. , Cetirizine+Ambroxol , Cetuximab 100 Mg , Cetuximab 500 Mg , Chloramphenicol 250 Mg. , Chlordiazepoxide 10 Mg , Chlorine Based Compound ( Sodium Dicholoroiso Cyanurate ) Nadcc Tablets 75 Mg Wuth Available Chloroine 45 Mg Bis , Chloropheniraminemaleate 2.5Mg. , Chloropheniramine Maleate 4Mg. , Chloroquine Phosphate 250 Mg. , Chlorpromazine Hydrochloride 50Mg. , Chlorpromazine Hydrocloride 100Mg. , Chlorthalidone 12.5Mg , Chlorthalidone 6.25Mg , Chlorzoxazone 500Mg + Diclofenec 50Mg + Paracetamol 325Mg , Chole Calciferol 2,000 Iu , Chole Calciferol 60,000 Iu , Chymotrypsin &Trypsin1,00,000 Iu , Cinnarzine 20 Mg, , Ciprofloxacin 250Mg. , Ciprofloxacin 500 Mg +Tinidazole600 Mg , Ciprofloxacin 500Mg. , Clarithromycin 250 Mg , Clindamycin 150Mg. , Clindamycin 300Mg. , Clomiphene Citrate 50 Mg , Clonazepam1 Mg , Clonazepam2 Mg , Clonidine 100Mcg , Clopidogrel 75Mg. , Clopidogrel 75Mg.+ Aspirin 75Mg , Clotrimazole 10Mg/G , Cloxacillin 500Mg. , Clozapine 100Mg. , Clozapine 50Mg. , Curcumin 250 Mg+Bioperin 250 Mg , Cyclophosohamide 50 Mg. , Cyproheptadine Hcl 2Mg , Dapsone 100Mg. , Dasatinib 20Mg , Dasatinib 50Mg , Deferasirox 100Mg , Deferasirox 400Mg , Deferasirox Dispercible100 Mg , Deferasirox Dispercible250 Mg , Deferasirox Dispercible400 Mg , Deflazacort 30Mg , Deflazacort 6Mg , Dexamethasone Sodium 0.5 Mg. , Diacerin +Glucosamine 50 Mg +750 Mg , Diacerin 50 Mg. , Diazepam 10Mg. , Diazepam 5Mg. , Diclofenac 50 Mg+ Thiocolchiside 4 Mg , Diclofenac 50 Mg+Serrtipeptidase 10 Mg , Diclofenac 50Mg.+Paracetamol 325 Mg. , Diclofenac 50Mg.+Paracetamol 325 Mg.+ Serrtipeptidase 10Mg. , Diclofenac Diethyolamoniummgel Bp 1.16% W/W Equivalent To Diclofenac Sodium Bp 1.0% W/W In A Gel. , Diclofenac Potassium Bp 50Mg Sugar Coated , Diclofenac Sodium 100 Mg. , Diclofenac Sodium 50 Mg. , Diclofenac Sodium Ip 100 Mg Sustained Release Film Coated , Diclofenac Sodium Ip 75 Mg Sustained Release Film Coated , Diclofenec Sodium 125 Slow Release Diclofenec Sodium 25 Mg Immidiate Release , Dicofenac Potassium 50Mg. , Dicyclomine 10 Mg. , Dicyclomine 20 Mg. , Diethylcarbamazine 100 Mg , Diethylcarbamazine 50 Mg , Digoxin 0.25Mg , Diltiazem 30Mg. , Diltiazem 60Mg , Diltiazem Sr 90 Mg , Diphenylhydramine 50Mg. , Divalproex Sodium 250 Mg , Divalproex Sodium 500 Mg , Doclofenac Free Acid 46.5Mg Equivalent To Diclofenac Sodium Ip 50Mg Dispersable , Domperidone 10 Mg. , Domperidone 15 Mg. , Domperidone 20 Mg. , Domperidone 5 Mg. , Donepezil 5 Mg , Doxifluridine 200 Mg , Donepezil10 Mg , Doxophyline 400Mg , Doxycycline 100Mg. , Doxylamine Duccinate 10 Mg , Doxylamine Succinate , Drotaverine 40 Mg , Duloxitine 30Mg , Dydrogesterone 10 Mg , Enalapril Maleate5mg. , Enalapril Maleate 2.5Mg. , Erlotinib 150 Mg , Erythromycin Stearate250 Mg. , Escitalopram10mg. , Escitalopram5mg. , Escitalopram 20Mg. , Ethamsylate500mg. , Ethinyl Estradiol 0.05 Mg , Etophylline 231 Mg +Theophplline 69 Mgmg. , Etophylline77 Mg + Theophplline 23 Mg. , Etoposide50 Mg , Etoricoxib 120 Mg , Etoricoxib 60 Mg , Etoricoxib 90 Mg , Everolimus 10Mg , Feerous Sulphate , Fenofibrate 145Mg , Fenofibrate 160Mg , Fenofibrate 200Mg , Feropenam 200Mg , Fexofenadine 120Mg. , Fexofenadine 180Mg , Fluconazole 150 Mg , Fluconazole 50 Mg. , Flunarazine 10Mg , Flunarizine 10 Mg , Fluxetine20 Mg , Folic Acid 5Mg. , Frusemide 20 Mg.+Spironolactone 50Mg , Frusemide 40 Mg. , Furazolidone 100Mg , Gabapentin 300Mg. , Geftinib 500 Mg , Glibenclamide 5Mg , Gliclazide 80 Mg. , Glimepride 1Mg. , Glimepride 2Mg , Glipize 1Mg.+Metformin 500Mg. , Glyceryltrinitrate 0.5Mg , Griseofulvin125g. , Griseofulvin250g. , Haloperidol15 Mg. , Haloperidol 10 Mg. , Haloperidol 5 Mg. , Hydoxizine Hydrochloride 10Mg. , Hydoxy Urea 500Mg. , Hydrochloroquine 200Mg. , Hydrochlorthiazide 25Mg. , Hydrochlorthiazide 50Mg , Hydroxychloroquine 200Mg , Hydroxychloroquine 400Mg , Hyoscine Butylbromide 10Mg. , Ibandronic Acid 50 Mg , Ibuorofen 400 Mg. , Ibuorofen 400 Mg.+Paractamol 325Mg. , Imatinib Mesylate 100Mg , Imatinib Mesylate 400Mg , Imipramine Hcl 25Mg. , Imipramine Hcl 75Mg. , Indomethicin 75 Mg , Iron And Folic Acid Enteric Coatef Tab Dried Ferrous Sulphate Ip Eq.To 45 Mg Elementalironand 400 Mcgfolic Acidip (Pink Color) Wifs Junior , Iron And Folic Acid Enteric Coatef Tab Dried Ferrous Sulphate Ip Eq.To Ferrous Iron 100 Mg And Folic Acid0.5 Mg (Bue Tablet) , Iron And Folic Acid Enteric Coatef Tab Ferrous Sulphate Ip To Ferrous Iron 100 Mgand Folic Acid 1P 0.5 Mg Granuled ( Red Tablet) , Iron Folic Acid , Isoniazide100mg. , Isosorbidedinitrate 10Mg , Isosorbidedinitrate 5Mg , Isosorbidemononitrate 10Mg , Isosorbidemononitrate 20Mg , Itraconazole 100 Mg , Ivermectin3mg , Ivermectin6mg , Ketoconazole 200Mg. , Ketorolac 10Mg. , Labetalol 50 Mg , Lactobacillus 60 Millon Spores , Lamivudine And Zidovudine Ip 150/300 Mg , Leflunomide 10Mg , Linezolid 600Mg , Loperamide 2Mg. , Loperidone 2 Mg , Lorazepam 1Mg. , Lorazepam 2Mg. , Losarten 50Mg. , Losarten25mg. , Losarten 50Mg.+Hydrochlorthiazide 12.5Mg. , Magnesium Hydroxide + Aluminiumhydroxide+ Simethecon , Magnnesium Hydroxide+Aluminium Hydroxide(500Mg.+250Mg.) , Melfoquine , Metformin 500Mg. , Metformine 500Mg.+Glibenclamide 1Mg. , Metformine 500Mg.+Glibenclamide 2Mg , Methotrexate 10 Mg , Methotrexate 2.5Mg. , Methotrexate 5 Mg , Methyl Ergometrine Maleate 0.125Mg. , Methyl Predinisolone4mg. , Methyl Predinisolone8mg. , Methyl Predinisolone 10 Mg. , Methyl Predinisolone 16Mg. , Methyl Predinisolone 40 Mg , Methylcobalamine 1500 Mcg , Methyldopa 250Mg. , Metoclopramide 10Mg. , Metolazone Usp 2.5 Mg , Metoprolol 25Mg. , Metoprolol 50 Mg. , Metronidazole 200 Mg. , Metronidazole 400Mg. , Nifedipine 5Mg. , Nilotinib 150Mg , Nilotinib 200Mg , Nimesulide 100Mg. , Nimesulide 100Mg.+Paracetamol 325 Mg. , Nitazozanide 200 Mg Dt , Nitrazepam5mg. , Nitrazepam 10Mg. , Norfloxacin 400Mg. , Norfloxacin 400Mg. + Tinidazole 600Mg. , Octreotide 0.05Mg(Containing Octreotide As Free Peptide) , Ofloxacin 200 Mg +Orinidazole 500 Mg , Ofloxacin 200Mg. , Ofloxacin 400Mg. , Olanzapine10mg. , Olanzapine20mg. , Olanzapine5mg. , Omalizumab 150 Mg , Omeprazole 20Mg. , Omeprazole 20Mg.+Domperidon10 Mg , Ondansetron2mg. , Ondansetron4mg. , Ondansetrpon8mg. , Ornidazole 500Mg. , Oxazepam 15 Mg , Oxcarbamazepin 150Mg. , Oxcarbamazepin 300Mg. , Oxcarbamazepin 600Mg. , Palonosetron .5Mg+Netupitant 300Mg , Pantoprazole 40 Mg+ Domperidone 10 Mg , Pantoprazole 40Mg. , Paracetamol 500Mg. , Paracetamol 650 Mg. , Pazopanib 200Mg , Pazopanib 400Mg , Pencicillin V 125 Mg , Pencicillin V 250 Mg , Phenobarbitone 30Mg. , Phenytoin Sodium50mg , Phenytoin Sodium 100Mg. , Pilocarpine Hydrochloride 5 Mg , Piogliatazone 15Mg. , Piogliatazone 30Mg. , Piracetam 800Mg. , Piroxicam20 Mg , Pozopanib 200Mg , Prazosin 2.5 Mg. , Prazosin 5Mg. , Prednisolone 10Mg. , Prednisolone 20Mg. , Prednisolone 5Mg. , Pregabalin 75Mg , Premixed Human Insulin Analogue (R- Dna Origin) , Primaquine15 Mg , Primaquine7.5Mg , Primaquine 2.5Mg , Promethazine 25Mg. , Propranolol 10Mg , Propranolol 20Mg. , Propranolol 40Mg. , Pyridoxine 10Mg. , Pyridoxine 40Mg , Quinine Sulphate 150Mg. , Quinine Sulphate 300Mg. , Rabeprazole 20Mg. , Ramipril 2.5Mg , Ramipril 5Mg. , Ranitidine 150Mg. , Ranitidine 300Mg. , Ribociclib 200Mg , Risperidone 1Mg. , Risperidone 2Mg. , Risperidone 2Mg+Trihexiphenydril 2Mg , Risperidone 4Mg. , Rosuvastatin 10Mg. , Rosuvastatin 20Mg. , Roxithromycin 150 Mg.. , Roxithromycin 300Mg. , Roxulotinib 15 Mg , Roxulotinib 20 Mg , Roxulotinib 5 Mg , Sacubitril/Valsartan 100 , Sacubitril/Valsartan 200 , Salazopyrine 1000Mg , Salazopyrine 500Mg , Salbutamol Sulphate 2 Mg , Serratiopeptidase 10Mg. , Serratiopeptidase 20Mg. , Sertraline 100Mg. , Sertraline 25Mg. , Sertraline 50Mg. , Sildenafil 25Mg , Sildenafil 50Mg , Sinitinib 50Mg , Sitagliptin Phosphate 100Mg , Sitagliptin Phosphate 25Mg , Sitagliptin Phosphate 50 + Metformin 1000/500Mg , Sitagliptin Phosphate 50Mg , Sodium Valproate +C.R.Valporicacid 200Mg. , Sodium Valproate +C.R.Valporicacid 300Mg. , Sodium Valproate +C.R.Valporicacid 500 Mg(Extended Release) , Sodium Valproate 200Mg. , Sodium Valproate 300Mg. , Sodium Valproate500mg. , Spironolactone 100Mg. , Spironolactone 25Mg. , Spironolactone 50Mg. , Sulfadoxine + Pyrimethamine 500Mg+80Mg. , Sulfamethoxazole 100Mg +. Trimethoprim 20Mg+ , Sulfamethoxazole 200Mg +. Trimethoprim 80 Mg+ , Sulfamethoxazole+ Trimethoprim Tab 400Mg+80Mg. , Sulfamethoxazole+Trimethoprim 800Mg+160Mg. , Tab Trihexiphendyl 2Mg , Tamoxifen 10Mg. , Tamoxifen 20Mg. , Tamsulosin4mg , Telmistran 20Mg. , Telmistran 40Mg. , Telmistran 40Mg.+Hydrochlorthiazide 12.5 Mg , Telmistran 80 Mg. , Temozolamide 100Mg. , Temozolamide 250Mg , Thyroxinsodium25 Mcg. , Thyroxinsodium50 Mcg. , Tinidazole 300 Mg. , Tinidazole 500Mg. , Torasemide 10 Mg. , Torasemide 20 Mg. , Tramadol 100Mg. , Tramadol 50Mg , Tramadol 50Mg + Paracetamol 325Mg , Tranexamic Acid 500Mg. , Trifluperazine 5Mg+Trihexyphenydyl 2Mg , Trihexyphenidyl 2 Mg , Trimetazine 60Mg. , Valpoic Acid 300Mg. , Valpoic Acid 500Mg. , Venlafaxine 37.5Mg , Verapamil 40 Mg , Vildagliptin 50Mg , Vildagliptin 50Mg Metformin Hci 1000Mg , Vildagliptin 50Mg Metformin Hci 500Mg , Vildagliptin 50Mg Metformin Hci 850Mg , Vitamin A , Vitamin C 500Mg. , Vitamine B,12 100Mg. , Warfarin Sodium 1Mg. , Warfarin Sodium 2Mg. , Warfarin Sodium 3 Mg. , Warfarin Sodium 5Mg. , Tacrolimus 0.5 Prolonged Release Hard Capsules , Tacrolimus 1.0 Prolonged Release Hard Capsules , Zinc Sulphate 20 Mg (Dispersible) , Name Of Injections , 5-F.U.250Mg , 5-F.U.500Mg , 5-Flurouracil , Activated Prothrombin Complex Concentrate (Dried Powder In ) Pack Size 500 Ius , Acyclovir 250Mg/Vial , Adenosine 6Mg/2Ml(2Ml Amp) , Adrenaline 1Mg/Ml (M1l. Amp.) , Aflibercept (Intracitreal) , Alfa Beta Arte Ether , Alpha Beta Arteether 150Mg /2Ml With Solvent , Amidarone 50Mg/Ml 3 Ml Vial. , Amikacin 100Mg./ 2Ml Vial , Amikacin 250 Mg. /2 Ml Vial , Amikacin 500Mg / 2Ml Vial , Ampicillin+Cloxacillin( 250 Mg.+ 250 Mg) 5Ml Vialwith Solvent , Anti Hemophiliac Factor Viii, Solvent Detargent & Monoclonal Purification (Dried Powder In ) Pack Size 250-400 Ius Per Pack , Anti Hemophiliac Factor Xi,Vapour Heated (Polysorbaate 80 & Vapor Heat,60O C, 10 Hrs,190 Mbar Then 80O C, 1Hr.375 Mbar) (Dried Powder In ) Pack Size 600 Ius , Arteether , Artemether 80Mg 1 Ml , Artesunate 60Mg/Vial.With Solvent , Atracurium Besylate 10 Mg/Ml 10 Ml.Amp. , Atracurium Besylate 10 Mg/Ml 2.5 Ml.Amp. , Atracurium Besylate 10 Mg/Ml 5 Ml.Amp. , Atropine Sulphate 0.6Mg.Per Ml Sc/Im/Iv , Bupivacine Hydrochloridefor Spinal Anaesthesia 0.5% (Heavy)4Ml Amp , Bupivacine Hydrochloride 0.25 20Ml Vial , Bupivacine Hydrochloride 0.5% 20Ml Each Vial Contains: Bupivacine Hydrochloride 5 Mg, Sodium Chl0ride 8.0 Mg, Methyl Paraben 1.0 Mg , Bupivacine Hydrochloride For Spinal Use 4Ml Vial , Bupivacine Hydrochloride Heavy 0.5% , 5Mg/Ml, Preservative Free, 4Ml Amp. For Intrathecal Use Only , Bupivacine Hydrochloride Heavy 4 Ml Amp.Each Vial Contains: Bupivacine Hydrochloride 5 Mg/Ml, Dextrose Monohydrate 80 Mg , Butorphanol Tartrate 1 Mg/Ml 1Ml , Caffeine Citrate 20Mg/Ml , Calcium Carbonate 10%10Ml.Amp. , Calcium Gluconate 10% 10Mlamp. , Calcium Leucovorin 15Mg. , Calcium Leucovorin 30Mg. , Calcium Leucovorin 50Mg. , Carboplatin 150Mg. , Carboplatin 450Mg. , Carboporost 250Mg. , Carboporost 500Mg. , Carboprost Promithazin 250 Mcg/Ml 1Ml/Amp. , Carrdioplegia Solution 20Ml , Cefazolin 250 Mg , Cefepime 1Gm. With Solvent , Cefepime 2Mg.With Solvent , Cefepime Igm+Tazobactum 125 Mg (1.125Gm) Vial With Solvent , Cefoparazone 1Gm. With Solvent , Cefoperazone1000mg +Salbactum500 Mg With Solvent , Cefoperazone 1000Mg +Tazobactum 125 Mg , Cefoperazone 250 Mg +Salbactum 250 Mg , Cefoperazone 500 Mg + Salbactum 500 Mg With Solvent , Cefotaxime 250Mg Salbactum 125 Mg. , Cefotaxime Sodium 125 Mg Vial With Solvent , Cefotaxime Sodium 1Gm Vial With Solvent , Cefotaxime Sodium 250Mg/Vialwith Solvent , Cefotaxime Sodium 500Mg.Vial With Solvent , Ceftazidime 1000 Mg +Salbactum 500 Mg , Ceftazidime 1Gm/Vial With Solvent , Ceftazidime 500 Mg With Solvent , Ceftriaxone 1000Mg +Salbactum 500 Mgwith Solvent , Ceftriaxone 1Gm +Tazobactum 125 Mg , Ceftriaxone 1Gm. With Solvent , Ceftriaxone 250 Mg With Solvent , Ceftriaxone 500 Mg With Solvent , Cefuroxime 1Gm. , Cefuroxime 750Mg. , Chloroquine Phosphate 40 Mg/Ml 5Ml Amp , Chlorphenamine 25Mg. , Chlorphenamine Maleate 10Mg/Ml10 Ml Vial , Chlorpromazine Hydrocloride 25Mg/Ml , Chlorquine Phosphate 64.5Gm/Ml 5Ml , Chromophenical 1Gm. , Cisatracurium 10Mg , Cisplatin 10Mg. , Cisplatin 50Mg. , Citicolin 250 Mg , Clindamycin 300Mg./2Ml , Clonidine Hydrochloride 1Ml Amp. Each Ml Contains Clonidine 150 Microgram , Cloxacillin 250Mg. , Colistimethate Sod (1 Million I U ) , Cyclophosphamide 200Mg , Cyclophosphamide 500Mg. , Cytarabine 100Mg. , Dacarbazine (Dtic) 200Mg With Solvent , Dacarbazine (Dtic) 500Mg.With Solvent , Daunorubicin 20Mg. , Nandrolone Decanoate 50Mg , Decarbazine 200Mg. , Decarbazine 500Mg. , Decitabine 30 Mg , Decitabine 50 Mg , Desferrioxamine , Dexamethasone Sodium Phosphate 8Mg/2Ml(2Ml Vial) , Dexmedetomide Hydrochloridde 1Ml Amp. Each Ml Contains: Dexmedetomide Hydrochloridde 100 Microgram , Dexmedetomide Hydrochloridde 2 Ml , Dexmedetomidine 100Mg/Ml 2Ml Amp. , Dextrose 25 % 25Ml , Dextrose 50 % 25Ml , Diatrizoic Acid76% 20 Ml , Diatrizole Meglumine Sod.76% , Diazepam 5 Mg/Ml ( 2Ml Amp) , Diclofenac Sodium 25Mg/Ml 3Ml Amp , Dicyclomine 10Mg/2Ml Vial , Digoxine 250Mcg/Ml , Diltaizem 5Mg/1M 5Ml , Diptheria Antitoxin 1000Iu , Dobutamine 50Mg/5Ml , Docetaxel 120Mg.With Solvent , Docetaxel 20Mg.With Solvent , Docetaxel 80Mg.With Solvent , Docetaxel With Vit. E 120 Mg , Dopamine Hcl 40Mg/Ml 5Ml Amp , Doripenum 500 Mg. , Doxorubicine 10Mg. , Doxorubicine 50Mg. , Doxorubicine Liposome 10 Mg. , Doxorubicine Liposome 20 Mg. , Drotaverine 40Ml/2Ml( 2Ml Amp) , Emicizumab 150Mg , Emicizumab 30Mg , Emicizumab 60Mg , Epinephrine Hydrochloride 1Mg/Ml , Epirubicine 10Mg , Epirubicine 50Mg. , Erythropiotine 10000 Iu , Erythropiotine 2000 Iu , Erythropiotine 4000 Iu , Esmolol 100 Mg Vial , Ethamsylate Imiv250mg( 2Ml Amp) , Etiophylline+Thiophylline 220Mg/2Ml , Etomidate 2Mg/Ml , Etoposide 100Mg. , Etamrylate 250Mg /2Ml , Ephedrine 30Mg/Ml 1Ml Amp , Everolimus 5Mg , Factor Eight Inhibitor Bypassing Agents 500 Iu , Fentanyl Citrate 50 Mcg/Ml2ml.Amp. , Filgrastim 300 Mcg , Fluconazole 200Mg. , Flumazenil 0.1 Mg/Ml 5 Ml Multiple Dose Vial , Frusemide 10Mg/Ml (2Ml Amp) , Gemicitabine 1.4Gm. , Gemicitabine 1000 Mg Vial , Gemicitabine 200Mg. , Gentamicin 40Mg/Ml 2Ml Amp. , Glucagon 1Mg/1Ml , Glycopyrolate 0.5Mg+Neostigmine Methylsulphate 2.5 Mg (0.5Mg+2.5Mg) 5Ml , Glycopyrolate Usp .02Mg/Ml. ( 1Ml Amp.) , Granidetron 3Mg. , Haemostat 20Ml , Haloperidol 5Mg./Ml , Halothane 250Ml. , Hemocoagulase 1Ml Ampoule Each Ml Contains Hemocoagulase 1 Iu , Hepamarz , Heparin 5000 Iu 5Ml , Heparin 5000 Iu/Ml 5Ml Vial , Hepatites B Imminoglobin 2Ml (100 Iu) , Hepatitis-B-Vaccine0.5 Ml Vial (Pedia) , Hepatitis-B-Vaccine10ml Vial , Hepatitis-B-Vaccine1ml Vial (Adult) , Human Anti D Immunoglobin 300M/U , Human Anti D Immunoglobin 5 Gm , Human Hepatitis Immunoglobin , Human Insulin Analogue Inj (Biosynthetic R- Dna Origin) Fast Acting Insulin Aspart 100 Iu/ Ml In 3 Ml Pfs , Human Normal Immunoglobin For Intravenous Use 5Gm/100Ml , Human Insulin Biphesic 30:7010Ml , Human Tetanus Hyperimmunoglobulin 250 I.U. , Human Tetanus Hyperimmunoglobulin 500 I.U. , Hydrocortisone Sodium Succinate 100Mg Vial With Solvent , Hydroxy Progesterone Caproate 250Mg/Ml , Hylurunidase , Hyoscine Butylbromide 20Mg./Ml , Ibandronicn Acid 6 Mg , Ifosphamide+Mesna 1Gm. , Imipenem+Cilastatin Sodium 500Mg. , Immunoglobin , Indacaterol + Glycopyrronium C30 , Insulin Degludec (R- Dna Origin) Long Acting Basal Insulin Analogue 100 Iu/ Ml In 3 Ml Pfs , Interferon Beta 30 Mcg (Pfs) , Ionic Contrast Media Dirtozote Meglumine Diatrazoate Sodium 60% ( For Non Invasine & Non Oral , Iron Dextran 50Mg/Ml 2 Ml Amp. , Iron Sucrose 100 Mg/5 Ml( 5Ml Amp.) , Iron Sucrose Amp.1.5Ml Amp. , Isoflurane 250 Ml Bott. , Isoprenaline 2Mg/Ml 1Ml , Isoxsuprine Hydrochloride 5 Mg/Ml 2 Ml Amp. , Ketamine 100 Mg/Ml 10Ml Vial , Ketamine Hydrochloride 50 Mg./Ml 10Ml Vial , Ketorolac 0.5% , Labetolol 20 Mg/Ml, 4 Ml.( 4Ml) , Labetolol 5 Mg/Ml, 2 Ml. , L-Asparginase5000 Iu , L-Asparginase 10000 Iu , Levetiracetam 250 Mg , Levetiracetam 500 Mg , Levobupivacine Hydrochloride 0.5% 10Ml Ampoule Each Ml Contains Levobupivacaine Hydrochloride 5Mg , Levosulpride 50Mg/Amp. , Lignocain2%(21.3Ml/Mg) 30Ml Vial , Lignocain (Preseravatine Free) 2% 50Ml , Lignocain 2% + Adrenaline 5Mcg/Ml 30 Ml Vial , Lignocain 4% Topical Solution 30 Ml. , Lignocain 5% Ip Heavyfor Spinal Use 2 Ml. , Lignocain Hydrochloride 2% For I.V. 30Ml , Lignocain Hydrochloride For Spinal Anaesthesia (Heavy) 0.05% 2 Ml Amp , Lignocain Hydrochloride Gel 2% W/V ( 30Gm Tube) , Lignocaine Hydrochloride 2% Each Ml Contains Lignocaine Hydrochloride 21.3 Mg, Sodium Chloride 6.0 Mg Methylparaben 1 Mg(As Preservative) Water For Injection 30 Ml Vial , Lignocaine Hydrochloride 2% With Adrenaline Each Ml Contains Lignocaine Hydrochloride 21.3 Mg, Sodium Chloride 6.0 Mg Methylparaben 1 Mg(As Preservative) Water For Injection Adrenaline 1:2,00,000 30 Ml Vial , Lincomycin 300Mg/Ml , Liraglutide (Glp- 1 Analogue) Biosynthetic R- Dna Origin. Eacj Pfs Contains 18 Mg Liraglutide/ 3Ml , Long Acting Risperidone , Long(Naturalvitamine K 1) , Lorazepam 2Mg Ml 1 Ml Amp , Lorazepam 2Mg Ml 2 Ml Amp , L-Ornithine+L-Asparatate 5Mg/10Ml , Low Molcular Weight Heaparin 0.4 Mg , Low Molcular Weight Heaparin 0.6 Mg , Magnesium Sulphate50%W/V 1 Ml Amp. , Magnesium Sulphate50%W/V 2 Ml Amp. , Mephentermine 30Mg/Ml 10Ml Vial. , Mephentine 10Ml Vial , Meropenem 125 Mg.With Solvent , Meropenem 1Gm. With Solvent , Meropenem 250Mg.With Solvent , Meropenem 500Mg.With Solvent , Metaclopromide 5Mg/Ml 2Ml Amp. , Methocarbamol 100Mg , Methotrexate 15Mg./Ml Vial , Methotrexate 50Mg./Ml Vial , Methoxy Polyethylene Glycol-Epoetin Beta100mcg/0.3Ml Pfs , Methoxy Polyethylene Glycol-Epoetin Beta75mcg/0.3Ml Pfs , Methoxy Polyethylene Glycol-Epoetin Beta 50Mcg/0.3Ml Pfs , Methyl Ergometrine 0.2Mg/Ml 1Ml Amp. , Methylpredniosolone 1Gm. With Solvent , Methylpredniosolone 500 Mg With Solvent , Metoprolol 1Mg/5Ml , Midazolam Hcl 1Mg/Ml5ml Amp. , Midizolam Hcl 1Gm /Ml 10Ml. Vial , Milrinone 10Mg/Ml. , Mitomycin 10Mg. , Mitoxantrone 20Mg. , Morphen Sulphate 10Mg/Ml (1Ml Ampoule) , Multivitamin 10Ml. Amp. , N-Acetyl Cydteine 200 Mg/Ml In 10 Ml Amp , Naloxone 0.4Mg/Ml 1Ml Amp. , Nano Paclitexel 300Mg. , Neofopam 20Mg , Neostigamine 2.5Mg/5Ml 1Ml Amp. , Neostigmine Methylsulphate 0.5 Mg/Ml 1Ml Amp. , Netilmycin 25 Mg./Ml 1 Ml Vial , Netromycin 10 Mg. , Nikethamide Amp. , Nimotuzumab 50Mg 10Ml Vial , Nitroglycerine Usp 25Mg /5Ml ( 5Ml Amp.) , Non Ionic Contrast Media Iohexl For I/V Use 350Mg/100Ml , Non Ionic Contrast Media Iohexl For I/V Use 350Mg/50Ml , Noraderanaline 2Mg Base/2 Ml Amp. , Ntg 25Mg Patch , Obinutuzumab 1000Mg , Octreotide 0.10Mg(Containing Octreotide As Free Peptide) , Octreotide 10Mg , Octreotide 20Mg , Octreotide 30Mg , Octreotide Lar 30 Mcg , Olanzapine 10Mg/Vial , Omalizumab 150 Mg , Omeprazole L 40Mg. 10Ml Vial , Ondansetron2mg/Ml, (2Ml Amp.) , Bevazumeb 100Mg , Cavazitexel 60Mg , Bortzomib 2.5Mg , Busulphan 60Mg , Albumin Bound Pacalitexel 100Mg , Erivulin 1Mg , Ondansetron2mg/Ml, (4 Ml Amp.) , Lyposomal Doxorubicin 20Mg , Ornidazole 500Mg. Inj , Oxaliplatin 100 Mg , Oxaliplatin 50Mg , Paclitaxel 30Mg With Solvent , Paclitaxel100mg. With Solvent , Paclitaxel 260Mg With Solvent , Paclitaxel Injection Concentrate For Nanodispersion 100 Mg/0.91Ml , Paclitaxel Injection Concentrate For Nanodispersion 300 Mg/2.73Ml , Paclitaxel Protein Bound Particles For Injectable Suspension(Albumin-Bound) , Paclitaxel With Cremophore-El,Multidose Vial 100Mg , Paclitaxel With Cremophore-El,Multidose Vial 300Mg , Paclitaxel With Cremophore-El,Multidose Vial 30Mg , Pancrunium 10Mg 5Ml , Pancrunium 2Mg/Ml 2Mkl Amp. , Paracetamol Amp. , Pegylated Liposomol Doxorubicin 10 Mg/5Ml , Pentaglobulin(1Gm Enriched Immunoglobulins) , Pentaprazole 40Mg. Vial With Solvent , Pentazocin Lactate30 Mg/Ml ( Aml Amp.) , Pertuzumab 420Mg , Pethidine Hydrochloride 50Mg. , Pheneramine Maleate 22.75Mg/Ml , Phenobarbitone 200Mg , Phenylephrine 10Mg. , Phenylephrine Hcl Ip 0.12% W/V Naphazoline Hcl Usp 0.05 W/V Chlorpheniramine Maleate Ip 0.1% W/V Menthol Ip 0.005%W/V Comphor Ip 0.01% W/V Benzalkonium Chloride Solution Ip 0.01% W/V (As Preservative ) In Strerile Aqueous Base 10 Ml Vial , Phenytoin Sodium 50Mg/Ml 2Ml Amp. , Phylomenadione Bp 10 Mg./Ml., 1 Ml. Amp. , Phytomenadione ( K1) 1Mg , Phytomenadione (K1) 10 Mg , Piperacillin+Tazobactum 1000 Mg + 125 Mg 10 Ml Vial With Solvent , Piperacillin+Tazobactum 2000Mg + 250 Mg 20 Ml Vialwith Solvent , Piperacillin+Tazobactum 4.5 Gmvial With Solvent , Polymyxin B Sulphate 5 Lack Unit , Polymyxin B Sulphate Bp 5000 I.U Chloramphenicol Ip 4 Mg Dexamethasone Sodium Phosphate Ip 1 Mg Phenylmercuricnitrate Ip 0.00001 (As Preservative )In A Sterile Base 5 Ml Vial , Polymyxin B Sulphate Bp 5000 I.U Chloramphenicol Ip 4 Mg Phenylmercuric Nitrate Ip 0.00001 (As Preservative )In A Sterile Base 5 Ml Vial , Potassium Chloride 150Mg/10Ml Amp. , Pralidoxime25mg Per Ml 20Ml Amp. , Procine Lung Surfactant240 Mg , Procine Lung Surfactant 120 Mg , Promethazine25mg , Promethazine50mg. , Propofol 1%10Mg/Ml 20Ml Vial , Propofol 1%10Mg/Ml 50Ml Vial , Propofol 1% 10Mg/Ml 10Ml Vial. , Protamine Sulphate10mg/Ml , Quinine Dihydrochloride 150Mg/ Ml 2Ml Amp. , Quinine Dihydrochloride 1Ml , Quinine Sulphate 300Mg/Ml 2Ml Amp , Rabeprazole 20Mg.With Solvent , Rabeprazole 40Mg.With Solvent , Rabies Immunoglobines Vial , Rabies Vaccine Ip Human (Purified Chick Embryo Cell Culture 2.5 Iu For Id) , Rabies Vaccine Tissue Culture , Ranibizimab (Intracitreal) , Ranibizumab10ml/Mg , Ranitidine 50Mg/2Ml , Recombinant Tpa , Rituximab 100 Mg , Rituximab 500 Mg , Rocuronium 10Ml Vial , Ropivacaine 0.5% 20Ml , Ropivacaine Hydrochloride 0.5% (Preservative Free) 10 Ml Vial Each Ml Contains Ropivacaine Hydrochloride 5Mg Sodium Chloride , Ropivacaine Hydrochloride 0.75% (Preservative Free) 10 Ml Vial Each Ml Contains Ropivacaine Hydrochloride 7.5Mg Sodium Chloride 7.5Mg , Sargramostin 500 Mg , Secukinumab 150Mg/1Ml , Sevoflurane 200Cc , Sevoflurane-250Ml , Snake Venom Anti Serum 10Ml Vial , Snake Venom Anti Serum Powder From 10Ml Vialwith Solvent , Sodium Bicarbonate 7.5%/10Ml , Sodium Fluorescein Dye 20% 3Ml , Sodium Hyaluronate(Intraocular) 10Mg/Ml2ml , Sodium Nitroprusside , Sodium Thiopeentone 0.5Gm Powder/Vial 20Ml Vial With Solvent , Sodium Valporate 100Mg/Ml 5Ml Vial , Streptokinase 1500000 Iu , Streptomycin 0.75Mg. , Succinyl Choline Chloride 50 Mg/Ml 1Ml Vial , Surfactant 4Ml , Surfactant 8Ml , Taramadol 100M/Ml (2Ml Amp.) , Taramadol 50Mg/Ml (2Ml Amp.) , Tecoplanin 400Mg With Solvent , Temozolamide 100Mg , Terbutalime 0.5Mg/Ml , Teriparatide 600 Mcg/2.4Ml(Pfs) , Terlipressin 1Mg. , Tetanus Hyper Immuneglobulin 1000 Iu , Tetanus Toxide 0.5Ml , Tetanus Toxide 5Ml Vial , Thiopentone Sodium 500Mg With Solvent , Tirfiban 5Mg/100Ml , Tobramycine 60Mg , Tobramycine 80Mg , Torasemide 100Mg. , Tramadol Hydrochloride 100Mg/2Ml , Tranexamic Acid 5Ml Ampoule Each Ml Contains Tranexamic Acid 100Mg , Trastuzumab 150 Mg , Trastuzumab 440 Mg , Trastuzumab Emtansine 100 Mg , Trastuzumab Emtansine 160Mg , Triamcimdone Acctonide 10Mg/Ml , Triamcimdone Acctonide 40Mg/Ml , Triptorelin Pamoate [Sterile Lyophilized] 11.25Mg , Triptorelin Pamoate [Sterile Lyophilized] 22.50Mg , Tryphan Blue 0.06 , Ulinastatin 100000 Iu Vialseach , Ulinastatin 200000 Iu Vialseach , Unfractionated Heparin , Urokinase 5 Lac Iu/Vial , Valethamae Bromide 8Mg/Ml 1Ml Amp. , Valtroic Acid , Vancomycin 125Mg. , Vancomycin 250Mg. , Vancomycin 500Mg. , Vasopressin 20 Iu/Ml , Vaspressine 40 Iu/Ml , Vecuronium Bromide 10Mg Lyophilized Vial , Vecuronium Bromide 2Mg/Ml (2Ml Amp) , Vicoelastic Hypermellose Ophthalmic Solution Pfs , Vinblastune 10Mg. , Vincristin Sulphate 1Mg. , Vit B 12 500Mcg/Ml 30Ml Vial , Vitamin C , Voriconazal 200Mg/Vial , Water For Injection 10Ml Amp. , Water For Injection 2Ml Amp. , Water For Injection 5Ml Amp. , Zoledronic Acid 4Mg. Vial , Zuclopenthixol 50Mg. , Gama And Delta Tocotrienol(400Mg) +L-Carnitine(250Mg) , Nanucurcumin(250Mg)+Tinosporacardofolia(250Mg)+Carica Papaya(250Mg) , Propofol 1% Mct/Lct Oleic Acid Based Emulsion 20Ml Ampule , Pharmacological Agents Required To Provide Enzyme Replacement Therapy For Patients With Gaucher Disease Type-1 Caused By Beta Glucosidase Enzyme Deficiency. , Rurioctocog Alfa Pegol (Pegylated Recombinant Human Fviii) 250 Iu, 500 Iu, 750 Iu, 1000 Iu, 1500 Iu & 2000 Iu , (Velaglucerase Alfa (R-Dna Origin) 400 Units , (Idursulfase (R-Dna Origin)-2 Mg/Ml , (Agalsidase Alfa (R-Dna Origin) - 1 Mg/Ml , Full Lengh Coagualtion Factor Viii 250 Iu (Octocog Alfa) , Full Lengh Coagualtion Factor Viii 500 Iu (Octocog Alfa) , Full Lengh Coagualtion Factor Viii 1000 Iu (Octocog Alfa) , Antihemophilicfactor Vii And Ix Inhibitor Bypassing Activity Apcc Complex 500 Unit , Antihemophilicfactor Vii And Ix Inhibitor Bypassing Activity Apcc Complex 1000 Unit , Recombinant Antihemophlic Factor Ix-250 Iu , Recombinant Antihemophlic Factor Ix-500 Iu , Recombinant Antihemophlic Factor Ix-1000 Iu , Romiplostim 250Mcg/0.5Ml Vial (Lyophillised) , Romiplostim 500Mcg/1 Ml Vial (Lyophillised) , Name Of I/V Fluids , (L-Alanine + L-Glutamine) 50Ml , 0.9% Normal Saline Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Aminoacid 10%500Ml , Balanced Salt Solution In 1000Ml,Non Pvc,Dehp Free,Osmolarity 294 Sid Value 49.5 In Free Dlex Bag , Balanced Saltsolution In 500Ml,Nonpvc,Dehp Free,Osmolarity 294 Sid Value 49.5 In Free Flex Bag , Ciprofloxacin 100Mg/50Ml 100Ml Bfs Bottle , Ciprofloxacin 100Mg/50Ml 100Ml Ffs Bottle , Dextran 70500Ml Bottle , Dextron 40 500Ml , Dextrose5% 500Ml Bfs Bottle , Dextrose5% 500Ml Ffs Bottle , Dextrose & 9% Normal Saline Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Dextrose 10% Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Dextrose 10% 500Ml Bfs Bottle , Dextrose 10% 500Ml Ffs Bottle , Dextrose 5% Self-Collapsible Cosed System Non Air Depen Dent I.V.Fluids Cotainer With Silicon Port Witport With Blue-Rip Off Seal 500Ml Bagbag B Bag , Dextrose With Saline 5%+9%500Ml Bfs Bottle , Dextrose With Saline 5%+9%500Ml Ffs Bottle , Elastomeric Pumps With Flowrate 2Ml/Hr (Infusor).Max Volume 130Ml , Elastomeric Pumps With Flowrate 5Ml/Hr (Infusor).Max Volume 300Ml , Elastomeric Pumps With Multirate 1,2,3,Ml/Hr (Infuor) Max Volume 300Ml , Elastomeric Pumps With Multirate 2,3,5,Ml/Hr (Infuor) Max Volume 300Ml , Elastomeric Pumps With Multirate 5,7,12,Ml/Hr (Infuor) Max Volume 300Ml , Electrolyte –E- Dextrose 5G.,Sodium Aetate0.64 Gsodium Chloride 5G.Potassium Chloride 75Mg.Sodium Citrate 75Mg.Calcium Chloride 5Mg.Magnesium Chloride 31Mg Sodium Meta B1 Sulphate 20Mg 500Ml Bottle Bfs Bottle , Electrolyte –E- Dextrose 5G.,Sodium Aetate0.64 Gsodium Chloride 5G.Potassium Chloride 75Mg.Sodium Citrate 75Mg.Calcium Chloride 5Mg.Magnesium Chloride 31Mg Sodium Meta B1 Sulphate 20Mg 500Ml Bottle Ffs Bottle , Electrolyte- G 500 Ml Bfsbottle , Electrolyte- G 500 Ml Ffsbottle , Electrolyte- M500ml Bfs Bottle , Electrolyte- M500ml Ffs Bottle , Electrolyte- P 500Ml Bfs Bottle , Electrolyte- P 500Ml Ffs Bottle , Fat Emulsion 20%500 Ml Bottle , Fat Emulssion 20% 250Ml Bottle , Fluconazole 100Ml Bottle , Glutamine Dipeptide 100 Ml , Glycine3 Ltr.Jar , Hamodialysis Fluid Acetate 10 Ltr. , Heamodialysis Fluid Bicarbonatepottassium Chloride Free( Part A 10 Ltr.+ Part B 500 Gm 2 Pkt) , Heamodialysis Fluid Bicarbonate ( Part A 10 Ltr.+ Part B 500 Gm 2 Pkt) , Human Albumin 20%100Ml Vial , Hydroxy Ethyl Starch 3% 500Mlbottle , Hydroxy Ethyl Starch 6% 500Mlbottle , Hydroxy Ethyl Starch 6% Solution With Sodium Chloride 0.9% Iv Infusion 500Mlbottle , Insulin Degludec/ Insulin Aspart (R- Dna Origin) Solution For Sc Injection. 1Ml Of The Solution Contains 100 Units Insulin Degludec & Insulin Aspart (70 % Solube Insulin Degludec And 30 % Soluble Aspart) Equivalent To 2.56 Mg Satl- Free Anhydrous Insulin Degludec And 1.05 Mgsalt-Free Anhydrous Insulin Aspart In 3 Ml Pfs , Invert Sugar (10%) , Levofloxacin500 Mg 100 Ml Bottle , Linazolid 300Ml/600Mg , Lipid Glucose Solution 300Ml Bottle , Mannitol 20% 100Ml Bfs Bottle , Mannitol 20% 100Ml Ffs Bottle , Mannitol 20% 350Ml Bfs Bottle , Mannitol 20% 350Ml Ffs Bottle , Metronidazole100ml Bfs Bottle , Metronidazole100ml Ffs Bottle , Normal Saline 0.3% 100 Ml Bfs Bottle , Normal Saline 0.3% 100 Ml Ffs Bottle , Normal Saline 0.9% 100 Ml Bfs Bottle , Normal Saline 0.9% 100 Ml Ffs Bottle , Normal Saline 0.9% 500Ml Bfs Bottle , Normal Saline 0.9% 500Ml Ffs Bottle , Normal Saline 0.9% 500Ml Glass Bottle , Ofloxacin 200Mg. 100Ml Bottle , Omega 3 Fatty Acid50ml , P.D.Fluid 2Ltr.Pack , Paracetamol 100Ml , Physiologically Balanced Crystolloid Solution With Ph 5.0/Osmolority 294 Osmol/L, Bicorbonate-Acetate And Gluconate And Calorie Content 190 Kcal/L (Multiple Replacement Injection, Type 1, Usp) In Self Collapsibleviaflex Bag 1000 Ml , Physiologically Balanced Crystolloid Solution With Ph 5.0/Osmolority 294 Osmol/L, Bicorbonate-Acetate And Gluconate And Calorie Content 190 Kcal/L (Multiple Replacement Injection, Type 1, Usp) In Self Collapsibleviaflex Bag 500 Ml , Plasmalyte-148 Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Plasmalyte-A Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Plasmalyte-P Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Polygetatine500ml Bottle , Polymer From Deagraded Gelaltin + Nitrogen + Elecrolytes500ml Bottle , Premixed Human Insulin Analogue Inj (R- Dna Origin) Mixture Of Soluble Insulin Aspart 50% And Protamine Crystallised Insulin Aspart 50% 100 Iu/Ml In 3Ml Pfs , Propofol 1% Mct/Lct 20Ml In Ampule , Ringer Lactate 500Ml Bfs Bottle , Ringer Lactate 500Ml Ffs Bottle , Ringer Lactate Iv In Self Collapsibleviaflex Bag 1000 Ml , Ringer Lactate Iv In Self Collapsibleviaflex Bag 500 Ml , Ringer Lactate Ot Pack 500 Ml , Ringer Lactate Self-Collapsible Cosed System Non Air Dependent I.V.Fluids Cotainer With Silicon Port With Blue-Rip Off Seal 500Ml Bag , Sodium Chloride 0.9% 3Lit. , Sodium Chloride 3%(Nacl) , Tetra Starch 500Ml Bottle , Three Chamber Parentral Nutrition 1000 Kcal With Osmolarity 750 Mosom/Ltr 1440Ml , Three Chamber Parentral Nutrition 1400 Kcal With Osmolarity 1060 Mosom/Ltr 1540Ml , Total Parentral Nutrition Kit 1000 Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Central Line -N7,1000Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Central Line -N7,1500Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Central Line -N7,2000Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Peripheral Line -N4,1000Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Peripheral Line -N4,1500Ml , Triple Chamber Bag Containing Glucose ,Amino Acids And Lipids ,Lipid Cocnsist Of 80% Of Olive Oil+20% Soyabean Oil For Delivery Through Peripheral Line -N4,2000Ml , Waxy-Corn Hydroxy Ethyl Starch 130/0.4 In Plasma Adoptaed Solution , Three Chambered Bag Containing Amino Acids, Carbohydrate & Lipids For Central Line Administration, In Volume Restricted Patients625 Ml, Latex / Pvc Free Three Chambered Bag Of 625 Ml(740 Kcal) Containing 36 Gm Of Amino Acids, 90 Gm Of Carbohydrate, 25 Gm Of Fats(Mct 12.5 G, Soyabean Oil 10 G. Fish Oil 2.5 G)(Mct:Lct Ratio 1:1), Omega 3:Omega 6 Ratio Is 1:2.7. Along With Vitamin E, Calcium, Zinc And Other Electrolytes For Central Venous Infusion. , Sodium Chloride Ip 5.26 (G/L)+ Sodium Gluconate Usp 5.02(G/L)+ Potassium Chloride Ip 0.37(G/L) + Sodium Acetate Trihydrate Ip 3.68 (G/L) + Magnesium Chloride Ip 0.30(G/L), Osmolarity 294(Mosmol/L)(Calc), Ph 7.4, Ionic Concentration Sodium 140Meq/L+Ch 500Ml Closed Chamber With Blue And White Port , Sodium Chloride Ip 5.26 (G/L)+ Sodium Gluconate Usp 5.02(G/L)+ Potassium Chloride Ip 0.37(G/L) + Sodium Acetate Trihydrate Ip 3.68 (G/L) + Magnesium Chloride Ip 0.30(G/L), Osmolarity 294(Mosmol/L)(Calc), Ph 7.4, Ionic Concentration Sodium 140Meq/L+Ch 1000Ml Closed Chamber With Blue And White Port , Hydroxy Ethyl Starch 6% In Plasma Adapted Solution , Aminomix 1 Novum 1.0L- **2 Chamber Bag For Central Line Administration In 1 Lt Containing Amino Acids With Taurine And Zinc With Dextrose And Electrolytes Providing 800 Kcal And 50 Gm Amino Acids* , Smof Lipid 20% 100 Ml- *20% 100 Ml Four Oil Combination For Energy With Omega 6 : Omega 3 Ratio Of 2.5:1* , Omegaven- *10% 50 Ml Iv Omega 3 Fatty Acid* , Name Of Surgical , 1 Fr, 28 G Picc With Stylet And Split Needle Introducer , Vdrl Test Kit , 1-Pc Self Adhesive Drainable Stoma Bag For Colostomy & Illeostomy - Double Layered Self Adhesive With Flex Patern, Transparent Drainable Stoma Bag With Built In Filter And Velcro Outlet.Size 76 Mm , 1-Pc Self Adhesive Drainable Stoma Bag For Colostomy & Illeostomy - Swiss Roll Self Adhesive With Flex Patern, Transparent Drainable Stoma Bag With Built In Filter And Velcro Outlet. Size 75Mm , 1-Pc Self Adhesive Drainable Stoma Bag For Urostomy - With No Return Valve And Easy Flexible Outlet Size 15-45Mm , 2- Pc Pouches With Free Rotating Lockring Mechanism With Filter And Velcro Clamp Integrated In The Bag. Size 50Mm , 2- Pc Pouches With Free Rotating Lockring Mechanism With Filter And Velcro Clamp Integrated In The Bag.Size 40Mm , 2- Pc Pouches With Free Rotating Lockring Mechanism With Filter And Velcro Clamp Integrated In The Bag.Size 60 Mm , 2- Pc Pouches With Free Rotating Lockring Mechanism With Filter And Velcro Clamp Integrated In The Bag.Size 70Mm , 20X20cm Flexible Self Adhesive Protective Sheet To Prevent Excoriationsize 20X20 Cm , 29 G, 90 Mm Whitacare Spinal Needle , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Cura Guard Adhesive , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Cura Guard Adhesive , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Double Layer Of Adhesive Size 40Mm , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Double Layer Of Adhesive Size 50Mm , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Double Layer Of Adhesive Size 60 Mm , 2-Pc Base Plate/Flange For Colostomy/Illeostomy/Urostomy, Self Adhesive Base Plate Custom Cut With Belt Tabs, Double Layer Of Adhesive Size 70Mm , 3 Fr, 6 Cm Double Lumen Paediatric Central Line With Nitinol Guide Wire , A- Trup Loop Karlstoz Set Yellowcode-24 French B- Coding Nife Yellod Code C- Cold Knife With 20F Sheath , A.K.Slab , Abdominal Binder- Extra Large , Abdominal Binder-Large , Abdominal Binder-Medium , Abdominal Binder-Small , Abdominal Drain Set No- 16 , Abdominal Drain Set No- 24 , Abdominal Drain Set No- 28 , Abdominal Drain Set No- 30 , Abdominal Drain Set No- 32 , Abg Test Card , Abgel , Absorbent Cotton Wool Net 500 Gm. Roll , Absorbent Powder For Covering Excoriated/Damaged Skin Around Stoma.,Size 25 Gm , Adhasive Plaster10 Cmx 5Mtr Roll , Adhasive Plaster 7.5Cmx 10 Mtr Roll , Adult Epidural Set With 19 G Soft Polyurethane Epidural Catheter To Prevent Dura Puncture, 17 G/90 Mm Touhy Needle, .22 Micron Filter And Lor Syringe , Advanced Rf Energy Hand Instruments Of 12Mm Shaft Diameter For Open Procedureswith Shaft Lengths 22Cm And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm With 55 Degree Articulation And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm With 55 Degree Articulation And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 45Cm And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 45Cm And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedures With Shaft Lengths 14Cm And Should Be Both Hand & Foot Activated. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedureswith Shaft Lengths 14Cm And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedureswith Shaft Lengths 25Cm And Should Be Both Hand & Foot Activated With Curved Tip. , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedureswith Shaft Lengths 25Cm And Should Be Both Hand & Foot Activated. , Air Bed For Pressure Sore Alternate Ripell , Airway Guided Vedio Intubation For Single Patient Use, Ett Size- 7.0-8.5, 6.0-7.5, 4.0-5.5 & 2.5-3.5 , Airway Reusable Optic (Minimum 50 Intubation) ,With Two Size Disposable Blade, With Docking Station For Recharge Battery And Displays Service Life , Airway Tube All Size , Airway Visualization System (Adult)-Display Monitor With Video Output Capability. Work On Aaa Consumable Batteries & Runs Continuously Up To 90 Mints. Can Work On Reusable Batteries Too If Required, Anti Fog Lens With White Led Light Source, Supplied With 3Pcs Of Size 3 Channeled And 1 Pc Of Size 3 Non-Channeled Blades, 510 K , Iso & Ce Certified. , Ambu Bag Self Inflawin Bage Size Adult Made Of Silicone Material And Autoclavable , Ambu Bag Self Inflawin Bage Size Neonatelmade Of Silicone Material And Autoclavable , Ambu Bag Self Inflawin Bage Size Peadiarticmade Of Silicone Material And Autoclavable , Armored Tube Made Of 100% Silicon, Radio Opaque, Mounted Connector, Pilot Balloon With Universal Port. , Artificial Kidney 0.8 Meter Square , Artificial Kidney 1.2 Meter Square , Artificial Kidney 1.6Meter Square , Asepto Syringe , B.K.Slab , B.P.Instrument Mercurial Isi Marked , B.P.Instrument Stand Modelisi Marked , Babcock- Laparoscopic 10Mm A Traumatic Babcock, Straight 360 Degree Rotating With Insulated Shaft, A Traumatic Jaws With Ratchet Mechanism, Plastic Grip, 36 Cms Length, Independently Moving Jaws , Babcock- Laparoscopic 5Mm A Traumatic Babcock, Straight 360 Degree Rotating With Insulated Shaft, A Traumatic Jaws With Ratchet Mechanism, Plastic Grip, 36 Cms Length, Independently Moving Jaws , Baby Diaper (Napee Pad) For 3 To 8 Kg. Chield , Bacteria Filter , Bain Circuit Adult. , Bain Circuit Paed. , Bed Pan Stainless Steel , Bioabsorbable& Biocompatible Highly Porous & Sponge Based Adhesion Free Wound Dressing For Sinu-Nasal Cavity Size 8Cm X 2Cm , Blood Administration(Transfussion)Set , Breast Tissue Marker With Both Front Trigger And An Alternate Rear Trigger To Accommodate User Preference. Available With Two Unique Shapes With Permanent Ultrasound Enhancement Color-Coded Triggers Identify Different Marker Shapes.17G*10Cm , Broad Spectrum Antibacterial Double And Triple Lumen Polyurethane Hd Catheter,Catheter And Extension Line Along With Hub Should Be Impregnated With Chlorhexidine And Silversulfadizine Kit Should Contain- Fr-12, L-16Cm. With J Guide Wire, Rollerson Syringe, Dilator, Scalpel. Needle Free Cannula, Transduction Probe,Catheter Stabilization Device. , Broad Spectrum Antimicrobial Double And Triple Lumen Polyurethane Cvc Catheter Kit, Catheter And Extension Line Along With Hub Should Be Impregnated With Chlorhexidine And Silversulfadizine Kit Should Contain- Fr-7, G-14X18, L-16Cm.With J Guide Wire, Rollerson, Syringe, Dilator, Scalpel. Needle Free Cannula Transduction Probe, Catheter Stabilization Device. , Buprenorphine Patch 10Mg , Buprenorphine Patch 20Mg. , Buprenorphine Patch 5Mg, , Vurenorphine 20Mcg , Patch Fentenyle 10Mcg , Patch Fentenyle 20Mcg , Calcium Phosphate Cement , Cannula Fixer Set Consumable , Carbon Activated Filtroder Filter To Prevent Bad Odour And Ballooning Of Bag , Catheter Stabilization Device With Medical Grade Pvc Clamp Should Have Chlorhexidine Sterilizing Swab And Id Tag (Large And Medium) , Ccnpwt Canister 500 Ml With Aqua Gel , Ccnpwt Largepu Foam Dressing Kit Size- 26Cm X 15Cm X 3.3 Cm , Ccnpwt Mediumpu Foam Dressing Kit Size- 18 Cm X12.5 Cm X 3.3Mm , Central Line Double Lumen , Central Line Single Lumen , Central Line Triple Lumen , Central Lines 28G (Polyurethane) 30 Cm Length, Single Lumen , Chest Catheter No.20,24,26,32,36 , Chest Drain No.28 , Chest Drain No.32 , Cid Bag , Clavicle Brace , Clip Applier- Laparoscopic 10 Mm Reusable Ligaclip Medium/Large Size Applier With Clip Retention Grooves In The Jaw With Single Arm Movement, 36Cm Metal Shaft , Clip Applier-Laparoscopic 10/12 Mm Reusable Ligaclip Large Size Applier With Clip Retention Grooves In The Jaw With Single Arm Movement, 36Cm Metal Shaft , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Large 26Cmx16cmx3mm Nanocrystalline Silver Non Adherent Wound Contact Layer Track Pad Transparent Pu Drape Film Wound Measuring Scale , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Medium 18Cmx13cmx3mmnanocrystalline Silver Non Adherent Wound Contact Layer Track Padtransparent Pu Drape Film Wound Measuring Scale , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Small 10Cmx8cmx3mm Nanocrystalline Silver Non Adherent Wound Contact Layer Track Pad Transparent Pu Drape Film Wound Measuring Scale , Closed System Device With Tko Valve To Control Bi-Directional Flow Of Infusate Working At 7Psi Withdrawal Pressure , Closed Ventilator Suction Catheter 14 Fr , Codon Set , Collagen Drysheet10x10cm Sheet , Collagen Drysheet15x30cm Sheet , Collagen Drysheet20x40cm Sheet , Collagen Drysheet6x6 Cm Sheet , Collagen Granules , Collagen Wetsheet10x10 Cm Sheet , Collagen Wetsheet15x30 Cm Sheet , Collagen Wetsheet20x40 Cm Sheet , Collagen Wetsheet6x6cm Sheet , Complete Absorbable Mesh Fixation Device With Minimum Strap Length 7.0 Mm2 Point Fixation To Hold The Mesh And Device Should Be Of 25 Absorbable Straps. , Concentric Needles. , Condom Catheter , Consumable Forfibreless Video Scope, Should Have Suction Port & Oxygen Delivery Port, Should Be Usfda, Compatible With A-View Monitor Of Size 8.5 Inches With 8 Gb Memory. Sizes- Diameter 1.2Mm, 2.2Mm & 2.8 Mm , Corrugated Drin , Cotton Crape Bandage 10 Cm X 4 Mtr. , Cotton Crape Bandage 15 Cm X 4 Mtr. , Cotton Crape Bandage 5 Cm X 4 Mtr. , Cpap Kit And Nebulizer (Without Mask) Contains: - 1 Cpap Device And Manometer Connector - 1 Nebulizer. , Crammer Wire Splint , Crescent Knife , Cuffed Fenestrated Tracheostomy Tube , Cuffed Fenestrated Tracheostomy Tube Kit With Speaking Valve(Orator Kit) , Curved Scissors- Laparoscopic 5Mm Size, 360 Degree Rotating With Insulated Shaft, Non Ratchet , Plastic Grip, 36 Cms Length, Monopolar Pin Provision For Usage With Electro Surgical Unit, Independently Moving Jaws , Cuticell Size6x6 , Cuticell Size 10X10 , Cuticell Size 10X30 , Cvp Cannuladouble Lumen 7F , Dental X-Ray Film12”X15” (150 Sheet Pkt.) , Dexamethasone Intravitreal Implant , Diclofenac Patch , Digitalthermameter , Disposablecap , Disposable Adis Kit , Disposable Amniotic Fluid Collection Spillage Free Sac. , Disposable Cassettes For Alcon Phacoemulsification , Disposable Drapes Set , Disposable Eye Shield Protector Against U/V Light For Infant And Neonates.Sterilized Single Pack , Disposable Gown , Disposable High Absorbent Lscs Drape Sheath With Self Adherent Incisional Window , Disposable L.M.A. Pro-Seal Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. , Disposable Laparoscopy Bladeless Trocar With Inbuilt Silicon Reducer And Co2 Port , Disposable Needle 18G, 20G, 22G. 23G, 24G (Single Use) , Disposable Omnidrapes , Disposable Patient Body Cover With Six Holders, Weight Bearing Capacity > 125 Kgs. , Disposable Scalp Vein Set Size 18G, 20G, 22G, 23G, 24G , Disposable Spinal Needle 18,22,23,25 , Disposable Suction Catheterblack All Size , Disposable Suction Catheter Size 12,14, 16 , Disposable Suction Catheter Size 6,7,8,10, , Disposable Track (Nephrostomy)Dilator (12 No.) 8 To 30 , Disposable Tripon Forcep For Stone Extraction Used With Nephro/Ureterorenoscope , Disposable Trucut Gunforcep-18&20 Guage , Dissecting Hook Having Telescoping Shaft (10Cm-14Cm) With Integrated Hand Activation Control Buttons. , Double Compartment Flutter Valve For Heamothorax , Double Layer Acrylic Adhesive Skin Attachment Stabilization And Securement Device For Anchoring Percutaneous Cvc Catheters 5Cm*9Cm , Double Luman Catheter (Kit) , Double Luman Cathetercurve Kit Paed. Size 8.0 Fr.10 Cm , Double Lumen Cuffed Tracheostomy Tube Kit , Double Lumen Tubes For One Lung Ventilation 37 Fr, 39 Fr Each For Leeft And Right Side , Dressingdres. Drum Stainles Steelsize 13”X15 , Dressing Drum Stainles Steel Size 11”X11” , Dressing Drum Stainles Steel Size 12”X10” , Dressing Drum Stainles Steel Size 12”X12” , Dressing Drum Stainles Steel Size 9”X9” , Dry Amniotic Memebrane (Preserved) , Dura Patch 10X12(G.Patch) , Dura Patch 8X10 (G.Patch) , E.C.G.Roll Multi Channal , E.C.G.Roll Single Channal , Ecg Disposaable Electrode 40Mm Diaround Endopyelotomy Stent-10,12,14 , Ecg Electrodes With Offset Connector. Should Have Highly Conductive Wet Gel, Combination Of Instant And Long-Term Adhesives, Breathable Micro Porous Material, Special Soft Sponge, Offset Connector Concept, High-Quality Ag/Agcl Sensor. , Elastoplast 10 Cm ,1 Meter , Elastoplast 10 Cm ,4”X6 Meter , Electro Neuro Stimulator Needle For Plexus And Peripheralnerve Blocks With Detachable Extension Line 50Cm, G-20/21/23, L-35/50/100/150 Mm. , Emergency Cpap Kit Kit Designed For Use In Emergency Situations (Pre-Hospital Care). Kit Containing:- 2 Cpap Devices , 1 Adult Mask (Small) ,1 Adult Mask (Medium), 1 Adult Mask (Large) , 1 Silicone Arness, 1 Cpap Manometer, 1 Manometer Attachment Cord, 1 Oxygen Flowmeter Code (Complies With Bsi Standard) 1 X 20 Ml Syringe To Inflate Cushion, 1 Nebulizer, 1 Fio2 Device , Endo Applicator- Matt Finishing Stainless Steel Applier, With Us Fda Approved Sizes- A- 32.5Cmfor Ml/ L/ Xl B- 45Cm For Ml/ L/ Xl , Endotracheal Tube Elastomer Silicon Coated Phthallate Free Plain Size 2.5 To 5 , Endotracheal Tube Elastomer Silicon Coated Phthallate Free, Cuffed Size 5 – 9 , Endotracheal Tube With Sub-Glottic Suction Port 10.0Mm , Endotracheal Tube With Sub-Glottic Suction Port 6.0Mm , Endotracheal Tube With Sub-Glottic Suction Port 7.0Mm , Endotracheal Tube With Sub-Glottic Suction Port 7.5Mm , Endotracheal Tube With Sub-Glottic Suction Port 8.0Mm , Endotracheal Tube With Sub-Glottic Suction Port 8.5 Mm , Endotracheal Tube With Sub-Glottic Suction Port 9.0 Mm , Endotracheal Tubessize 2.5, 3, 3.5, 4, 4.5 , Endotracheal Tubessize 5, 5.5,6, 6.5,7, 7.5,8, 8.5, 9, 9.5, , Endotracheal Tubes Cuffed Size 6 , 6.5, 7, 7.5, 8 , Epiduralneedle16& 18 , Epidural Cather System 1 , Epidural Catheter 16& 18 , Epimatic Lor Syringe With Precallibarated Pressure Band , Face Mask For Cpap Device - Sizes 0,1,2,3,4 , Feeding Tube N0.5, 6, 7, 8 Fr , Femoral Arterial Catheter With Guide Wire • Should Have Pe Material To Prevent Dampning • Should Have Visualization Chamber For Arterial Puncture Confirmation• One Way Valve Introducer To Avoid Excessive Blood Loss• 18 G/10 Cm Pe Catheter With Introducer Needle And Guidewire , Femoral Caheter Paed. Size 11 Cm , Femoral Caheter Single , Femoral Catheter Double , Fentanyl Patch , Fiberglass Cast Tape 10Inch , Fiberglass Cast Tape 4 Inch , Fiberglass Cast Tape 6 Inch , Fibreless Video Scope, Compatible With A-View Monitor Of Size 8.5 Inches With 8 Gb Memory Should Be Usfda. , Filliform Dougies Female-6,8,10,12,14,16,18,20 , Filliform Dougies Male-3,4,5,6 , First Puncture Needle-16,18G , Fistula & Wound Management System Size 104-159Mm , Fistula & Wound Management System Size 156-228Mm , Fistula & Wound Management System Size 208-297Mm , Fistulla Needle 16 No. , Flexometalictube Size 5, 7, 8.5 , Flexometallic Endotracheal Tube Size 6.5, 7, 7.5, 8, 8.5 , Flodable Iol 20D, 21D, 22D, And 23D, 24D, 25D, 26D , Floseal 10M.L. Vhsd Kit - Flowable Heamostatic Gelatin Thrombin Matrixcontains Thrombin Human – 5000 Iu/10 M.L., 10M.L. Prefilled Syringe Containing Gelatin Matrix, 2 Vial Of Calcium Chloride 5M.L., Syringe With Luer Connector & Plastic Bowl For Thrombin. , Floseal 5M.L. Vhsd Kit - Flowable Heamostatic Gelatin Thrombin Matrixcontains Thrombin Human – 2500 Iu/5 M.L.,5M.L. Prefilled Syringe Containing Gelatin Matrix, 1 Vial Of Calcium Chloride 5M.L., Syringe With Luer Connector & Plastic Bowl For Thrombin. , Foldable Hydrophilic Acrylic Lens16d , Foldable Hydrophilic Acrylic Lens17.5D , Foldable Hydrophilic Acrylic Lens17d , Foldable Hydrophilic Acrylic Lens18.5D , Foldable Hydrophilic Acrylic Lens18d , Foldable Hydrophilic Acrylic Lens19.5D , Foldable Hydrophilic Acrylic Lens19d , Foldable Hydrophilic Acrylic Lens20.5D , Foldable Hydrophilic Acrylic Lens21.5D , Foldable Hydrophilic Acrylic Lens22.5D , Foldable Hydrophilic Acrylic Lens 15D , Foley Balloon Catheter Three Way(A) Fg 16,18,20,22 , Foley’S Catheter No. 12,14,16,18,20,22,24 , Foley’S Catheter No. 14 , 16, 18,Two Way , Foley’S Catheter No. 8,10 , Frazier Ventricular Needle , Fskin , G.Plast 4” , Gamjee Roll 43Meter , Gamjee Roll 63Meter+B1190 , Gifli Saw Wire , Gluco Meter , Gluco Meter (1X50 Strip) , Gluco Meter Strip (1X100 Strip) , Grasper- Laparoscopic 5Mm Straight 360 Degree Rotating With Insulated Shaft, Toothed A Traumatic Grasper With Ratchet Mechanism, Plastic Grip, 36 Cms Length, Independently Moving Jaws , Guide Wire0.33, 0.35, 0.38 , Haemorrhoid Band , Handpiece (Blue) , Handpiece (Transducer) , Hard Cervical Collar , Hernia System , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma Silicon Elastomer Coated– 2 Way , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma. Silicon Elastomer Coated – 3 Way , Hydrocolloid Dressing Semi-Permeable, Water Proof Dressing With High Absorption Efficiency. Dressing Has Grid To Measure The Size Of Wound. Size 15Cmx15cm , Hydrocolloid Dressing Semi-Permeable, Water Proof Dressing With High Absorption Efficiency. Dressing Has Grid To Measure The Size Of Wound.Size 10Cmx10cm , Hydrocolloid Dressing Semi-Permeable, Water Proof Dressing With High Absorption Efficiency. Dressing Has Grid To Measure The Size Of Wound. Size 20Cmx20cm , Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S/L. Ce Certified. , Impregnated Vascular Hemostatic Pec Porous Sponge For Control Of Traumatic Arterial & Venous Bleeding. Effective On Patient On Anticoagulants. Size 5Cmx 5Cm & Size 7Cmx 7Cm , Incise Drape Mini 10X10 Cm , Incise Minidrap Disposable Needle Size26.5 , Infent Feeding Tube Size Fg 5 To 8 , Infent Feeding Tube Size Fg 9 To 10 , Infusion Set With Airvent (Single Use) , Inrtoducer Needle , Insulin Pen Needle 32G (4Mm) Packing 100 Units. , Insulin Syringe 1 Ml , Intensive Spirometer , Intra Venous Fixation Device , Intracath Dusar Needle No. 16 , Irrigation Set , Iv Cannula With Injection Valve Size 18 , Iv Cannula With Injection Valve Size 20 , Iv Cannula With Injection Valve Size 22 , Iv Cannula With Injection Valve Size 24 , Iv Regulator Set , J.R.Circuit , Jamshidi Bone Marrow Biopsy/ Aspiration Needle. Should Have Lightweight Handle With Built-In Comfort Knob. Should Have Bevel Tip For Easy Coring Of Bone. Should Have Bevel Cannula Tip. Should Have Tapered Distal Cannula For Easy Recovery Of Sample. Should Be Us Fda Approved.8G*4, 11G*4, 11G*6, 13G*2, 13G*3.5 , K Wirw 1.5 Inch ( 6 Inch Long Ss) , K Wirw 2 Inch ( 6 Inch Long Ss) , K-90 Catheter , Kerotama , Kher,S T-Tube No.12 , Knee Brace-Hinge , Knee Brace-Rigid , Lance Tip , Laryngoscope Infant With Straight Blade And Spare Blue Ce/Iso/Fda Apporoved , Laryngoscope With Four Blades(Infant) Adult Normal Size&Extralarge Complete With Spare Blue & Batteries Ce/Iso/Fda Apporoved , Laryngoscope With Four Blades(Infant) Paediatric Normal Size&Extralarge Complete With Spare Blue & Batteries Ce/Iso/Fda Apporoved , Latex Free Porous & Permeable Elastic Adhesive Bandage 15 Cm , Long Term I V Catheter With Introducer And Integral Hub Protector Device Integrated With 70% Isopropyl Alcohol. , Low Adherent Absorbent Wound Dressing With A Polyester Perforated Wound Contact Layer Size 50Cmx7mtr Roll , Lumber Drainage Catheter , Lumbo Sacral Belt Medium , Makintosh Rubber Sheet Isi Mark , Malecott’Scatheter N0. 28 , Malecott’Scatheter N0. 30 , Malecott’Scatheter N0. 32 , Malicot Rubber Catheter No.12/15/16/18/20/22/24/ , Manual Resuscitators With Built In Pressure Limitation – Adult Withface Mask Of Size 3/4 & 5,O2 Tidal Volume 1300 Ml, Reservoir Volume 1500 Ml; 100% Latex Free & Double Layered. Built-In- Pressure Limitation, Single Shutter Valve, Integrated Hand Strap, Autoclavable, Provision To Attach Peep Valve.Us Fda, Ce & Iso Certified. , Manual Resuscitators With Built In Pressure Limitation – Pediatric/Neonatewith Face Mask Of Size 0 & 2 Max. Tidal Volume - 300 Ml; Volume Of O2 Reservoir - 1500 Ml/Volume 100% Latex Free Outer Cover & Double Layered. Single Shutter Valve, Integrated Hand Strap, Autoclavable, Pressure-Limiting Valve ,Provision To Attach Pressure Manometer, Usfda ,Ce & Iso Certified. , Maryland Dissector- Laparoscopic 5Mm Curved Maryland Dissector With Tapering End, 360 Degree Rotating With Insulated Shaft, Non Ratchet , Plastic Grip, 36 Cms Length, Monopolar Pin Provision For Usage With Electro Surgical Unit, Independently Moving Jaws , Mask N-95 , Medtronic Sheath 6F , Melicot Catheter No.12,14,18,20,22,24 , Micro Drip Set With Chamber (Paedia) , Micro Titanium Ligation Device With Locking Mechanism, Sterile, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. , Micropore 1.5” X 9 Meter , Micropore 1” X 9 Meter , Micropore 2” X 9 Meter , Micropore 3” X 9 Meter , Micropore 4” X 9 Meter , Micropore 5” X 9 Meter , Micropore 6” X 9 Meter , Microporous Antimicrobial Fabric Tape All Size , Milecot Drain Size 6,8,10 , Mini Suction Drain , Mucus Extator , Multifunctional Mask With The Attachment Of Nebulizer Mask, Venture Mask, Oxygen Mask, Cpap, And Bipap With 7” Oxygen Two Tube. Fda Approved. (Paediatric/ Adult) , Naasal Prong (Neonates) , Nebulazation Mask Set , Needle Holder- Laparoscopic 5Mm Straight Reusable Needle Holder With Ratchet Mechanism With High Quality Tungsten Plated Jaws For Enhanced Needle Grip, 36 Cms Metal Shaft. , Negative Suction Drain , Newborn Trocar For Neumothorax 8Fr/10Fr , Nitrous Oxide Mox Regulator Double Meter With Connecatation Pipe Body: Brass, Spring: Stainless Steel, Diaphragm: Rubber, Pressure Gauge: 0-250 Kg/Cm2] Pre-Set Regulator Up To 60 Psi , Nitrous Oxide Regulator Single Meter With Connecatation Pipe , Non Drying Malleable Non-Alcohol Ostomy Paste For Filling And Sealing Uneven Surface Stoma For Excoriated/Tender Skin.Size 6 Gm , Ointment Containing Centella Asiatica Extract: Nlt 0.6% With Sliver Oxide: 1.2% & Silk Extract 8% : 46% 50 Gm Jar , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved. Sizes- A- 8 Inch In Size With Curved For Ml/ L/ Xl. B- 11 Inch In Size With Right Angle 70° , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved.Sizes- 6” And 8” , Opsite Dressing15x28 , Opsite Dressing30x28 , Oropharyngeal Airway Size 1 , Oropharyngeal Airway Size 2 , Oropharyngeal Airway Size 3 , Oropharyngeal Airway Size 4 , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Proceduressize 1X 2Approved By Us Fda , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Proceduressize 2X 4Approved By Us Fda , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Proceduressize 4X 4Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property.Size 1X3.5Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property.Size 3X 4Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 1X1 Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 6X 9Approved By Us Fda , Oxygen Catheter , Oxygen Flow Meter Single Meter With Connection Pipe (Isi Mark) , Oxygen Mask Transparent Adult/ Peadiatric , Oxygen Mox Regulator Double Meter With Connecatation Pipe Body: Brass, Spring: Stainless Steel, Diaphragm: Rubber, Pressure Gauge: 0-250 Kg/Cm2] Pre-Set Regulator Up To 60 Psi , Paediatric Epidural Set(With 19G Needle) With Matle Stylet 22G Catheter0.22 Micron Epidural Catheter And Syringes , Partial Ossicular Reconstruction Prosthesis , Pec Hemostatic Patch For Post Renal Dialysis Size 5Cm X 7Cm , Percutaneous Surgical With Minilapsystem- A Manual Instruments For Direct Introduction To Surgical Site Without Need For Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A- Alligator Thumb Grip Graspers (2.3Mm) B- Clutch Thumb Grip Graspers (2.3Mm) C- Babcock Thumb Grip Graspers (2.3Mm)D- Bowel Thumb Grip Graspers (2.3Mm) , Percutaneous Surgical With Monopolar System- Direct Introduction To Surgical Site Without Trocar, Fabricated Stainless Steel Alloy Used Percutaneously.Sizes-A-Curved Spatulaprobes (2.4Mm)B-Straight Spatulaprobes (2.4Mm)C-Hook Probes (2.4Mm) D-Conical Probes (2.4Mm) , Percutaneus Transhepatic Bibiary Drainage Catheter No.10F , Percutaneus Transhepatic Bibiary Drainage Catheter No.12F , Percutaneus Transhepatic Bibiary Drainage Catheter No.6F , Percutaneus Transhepatic Bibiary Drainage Catheter No.8F , Peritonial Dialysis Catheterpeadiatric , Peritonial Dialysis Catheter Adult , Peritonial Dialysis Infusion Set , Peritonial Dialysis Introducer Needle 14 No. , Pft Filter , Phacoemulsification Sleeve , Phacoemulsification Tubings , Pistol Grip Curved Coagulating Shears Ergonomic Handle With Att,Shaft Lengths 36Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter , Pistol Grip Curved Coagulating Shears With Ergonomic Handle In The Following Shaft Lengths 23 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att. , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter. , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 45 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter. , Plaster Of Paris Bandage 10Cm X 2.7Mtr / Roll , Plaster Of Paris Bandage 15Cm X 2.7Mtr / Roll , Plaster Of Paris Powder For Medical Use 5Kg Pack , Pmma Pciol19.5D , Pmma Pciol20.5D , Pmma Pciol20d , Pmma Pciol21.5D , Pmma Pciol21d , Pmma Pciol22.5D , Pmma Pciol22d , Pmma Pciol23.5D , Pmma Pciol23d , Pmma Pciol24d , Pmma Pciol 18D , Pmma Pciol 19D , Polymer Ligation Device With Locking Mechanism, Sterile, Radiolucent Property,Usfda Approved. Cartridges Should Have Self-Adhesive Backing.Sizes- A- Medium Large Polymer Ligation Device. B- Large Ligation Device. C- Extra Large Ligation Device. , Polymyxin B Sulphate Bp 10000 I.U Chloramphenicol Ip 10 Mgdexamethasone Sodium Phosphate Ip 1 Mgin A Sterile Base Q.S 5 Gm Tube , Polymyxin B Sulphate Bp 10000 I.U Chloramphenicol Ip 10 Mg In A Sterile Base Q.S 5 Gm Tube , Post Operative Bag With Window Size 70Mm , Post Operative Bag With Window Size100mm , Postpartum Hemorrhage Balloon Silicon Catheter For Management Of Pph. Size- 24Fr, Length- 54Cm,Balloon Capacity-500Ml, , Powder For Surgical Gloves 400 Gm Pkt. , Ppe Kit , Prefilled Humidifier Bottle- Micro Diffuser That Produces Smaller Bubbles And Greater Surface Agitation, Reservoir Bottle Have Built In Oxygen Tubing Connector, Adapter Audible Alarm System Alerts Clinician Of Flow Restriction Of Oxygen Cannula Or Mask Tubing. Individually Packaged, Easy Snap Off Trigger Design. Fda Approved. , Proctoscope Disposable , Radial Arterial Catheter With Guide Wire • Should Have Pe Material To Prevent Dampning • Should Have Visualization Chamber For Arterial Puncture Confirmation• One Way Valve Introducer To Avoid Excessive Blood Loss• 20 G/8 Cm Pe Catheter With Introducer Needle And Guidewire , Radiation Protection Device Lead Apronsmall Size , Radiation Protection Device Lead Apron Large Size , Radiation Protection Device Lead Apron Medium Size , Radiation Protection Device Lead Apron With Coller Large Size , Radiation Protection Device Lead Apron With Coller Medium Size , Radiation Protection Device Lead Apron With Coller Small Size , Radiation Protection Screen 6X3 , Rae Preformed Tubes Made Of Pvc Size 4, 4.5, 5, 5.5 , Raney Scalp Clip Forceps , Rayle’S Tube No.14,16,18 , Rayle’S Tube No.20,22,24 , Rayle’S Tube No.8,10,12 , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection, Sizes- 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 Mm. , Reusable L.M.A. Pro-Seal Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. , Romodrain Size 12, 14, 16 , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 17 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter. , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 9 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter , Self Adhering Silicon External Catheter Should Be Built In Band Clear, Breathable, Odorless, Single Gama Sterilized, 100% Latex Free All Size , Semi-Automatic Core Biopsy Instrument Set With 2 Throw Lengths Of 10Mm & 20Mm In A Single Device Along With A Throw Length Indicator Window And A Fire Ready Indicator Mark . Compatible Adjustable Coaxial And A Blunt Tip Stylet. 18G*10Cm , 18G*16Cm & 18G*20Cm , Semi-Automatic Core Biopsy Instrument Set With 2 Throw Lengths Of 10Mm & 20Mm In A Single Device Along With A Throw Length Indicator Window And A Fire Ready Indicator Mark . Compatible Adjustable Coaxial And A Blunt Tip Stylet. 20G*10Cm ,20G*16Cm, 20G*20Cm , Shielded Iv Catheter To Prevent Nsi , Short Iv Seldinger Catheter With Straight Guide Wire And Pur Catheter Without Extension G- 18,20 L-8,10 Cm , Should Have A Dual Hook For Zero Migration Post Deployment Should Have The Option Of Repositioning After Deployment Should Have Durable Twisted Wire Construction For Durability.20G*107Mm , Silicon Catheter Filling Port No. 8,10,12 , Silicon Catheter No.14, 16 , Silicon Cuffed Paediatric Tracheostomy Tube With V- Nack Flange , Silicon Harness For Cpap Kit , Silicon Tyre No.279 , Silicone Band No.240 , Silver Impregnated Picc Catheter For Long Term Therapy 4Fr, 60 Cm Length Adjustable From Distal End , Single Handed Scalppal Blade Remover , Single Use Portable Negative Pressure Wound Therapy System With A Small Portable Sterile Pump Maintaining A Pressure Of 80Mm Of Hg (Nominal) +/- 20Mm Of Hg Size 10X20 Cm, 15X20 Cm , Skeletal Traction Kit , Skin Graftin Blade , Skin Temp 10X10 , Skin Temp 15X30 , Skin Temp 20X40 , Skin Traction Kit , Small Pu Foam Dressing Kit Size- 10Cm X7.5 Cmx3.3Mm , Soft And Gentle Adhesive For Sealing Area Around Stoma. Size 60 Gm , Soft Cervical Collar , Spring Loaded Automatic Biopsy Gun .One Handed Cocking Mechanism With Non-Roll Handle Design. Angled Sample Notch For Enhanced Needle Action.Choice Of Two Firing Buttons.14G*10 Cm & 14G*16 Cm , Spring Loaded Automatic Biopsy Gun .One Handed Cocking Mechanism With Non-Roll Handle Design. Angled Sample Notch For Enhanced Needle Action.Choice Of Two Firing Buttons.16G*10 Cm & 16G*16 Cm , Spring Loaded Automatic Biopsy Gun .One Handed Cocking Mechanism With Non-Roll Handle Design. Angled Sample Notch For Enhanced Needle Action.Choice Of Two Firing Buttons.18G*10Cm , 18G*16Cm & 18G*20Cm, 18G*25Cm , Spring Loaded Automatic Biopsy Gun .One Handed Cocking Mechanism With Non-Roll Handle Design. Angled Sample Notch For Enhanced Needle Action.Choice Of Two Firing Buttons.20G*10Cm ,20G*16Cm, 20G*20Cm , Sputum Vial , Steam Inhaler , Steem Inhalor , Stem Indigator 3 M , Stent For The Endonassal Dacrocystorhinostomy , Sterile Disposable Eye Drape, Sms Fabric , Sterile Dressing 4X6 , Sterile Fluorescein Strips , Sterile Hypoderic Syringeswithneedle Capacity2 Ml , Sterile Hypoderic Syringeswithneedle Capacity3 Ml , Sterile Hypoderic Syringes With Needle Capacity10 Ml , Sterile Hypoderic Syringes With Needle Capacity20 Ml , Sterile Hypoderic Syringes With Needle Capacity50 Ml , Sterile Hypoderic Syringes With Needle Capacity5ml , Sterile Raney Scalp Clips , Sterile Schirmers Strips , Stiff Guide Wire 04 Pcnl 0.035Mm , Stimulating Catheter For Continuous Plexus And Peripheralnerve Block. With Split Canula, Metallic Stylet, Antibacterial Filter, Electric Cable, Syringe, Dressing Film, Centimeter Catheter. G-18, L-35/50/85/120. , Sub Dermal Needles- For The Scalp. Should Made Up Of Stainless Steel The Tip Should Be Ultra-Sharp Lancet. , Suction Drain 14,16No , Suction Irrigation Pump Device With Npwt (Closed Suction Negative Suction Therapy) , Surgical Blade Size N0.10,11,12,15 Suitable For Fitting Handle No.3 , Surgical Blade Size N0.18,20,21,22,23,24,25Suitable For Fitting Handle No.4 , Surgical Rubber Gloves Isimark Sterile Size N0. 6 , Surgical Rubber Gloves Isimark Sterile Size N0. 6.5 , Surgical Rubber Gloves Isimark Sterile Size N0. 7 , Surgical Rubber Gloves Isimark Sterile Size N0. 7.5 , Surgical Rubber Gloves Isimark Sterile Size N0. 8 , Surgical Rubber Gloves Isimarknon Sterile Size N0. 6 , Surgical Rubber Gloves Isimarknon Sterile Size N0. 6 .5 , Surgical Rubber Gloves Isimarknon Sterile Size N0. 7 Pa , Surgical Rubber Gloves Isimarknon Sterile Size N0. 7.5 P , Surgical Rubber Gloves Isimarknon Sterile Size N0. 8P , Surgical Rubber Gloves Isimarknon Sterile Size N0. 8.5 , Surgical Rubber Gloves Isimarknon Sterile Size N0. 8.5 P , Sutureless Dural Graft Substitute 2X2 , Sutureless Dural Graft Substitute 3X3 , Sutureless Dural Graft Substitute 4X5 , Synthetic Cast (Fibar Glass) 10Cm, 15Cm , Syringe Pump Connectors , Tape Sponge , Taylor S Brace , Temporary Pacing Catheter 6F , Terniquit Set , Thomas Splint , Thre Layer Surgicalmask , Three Way Extension For Tiva • Should Have Three 6 Cm Extension With One Non Return Valves Each • Should Allow To Infuse Hypnotic,Analgesia And Muscle Relaxant Together • Should Made Up Of Chemically Inert Polyurethane Material , Three Way Stop Cock , Threeway Cannula , Threeway Catheter No.22 , Thyroid Shield , Tisseel Lyophilized 2 M.L. Kit :Two Component Fibrin Sealant Having 1M.L. Human Fibrinogen + 1M.L. Human Thrombin, 1 M.L. Synthetic Aprotinin And Calcium Chloride With Duplojet System. , Tisseel Lyophilized 4M.L. Kit :Two Component Fibrin Sealant Having 2M.L. Human Fibrinogen + 2M.L. Human Thrombin, 2 M.L. Synthetic Aprotinin And Calcium Chloride With Duplojet System. , Total Ossicular Reconstruction Prosthesis , Tracheostomytube With Sub-Glottic Suction Port 10.0Mm , Tracheostomytube With Sub-Glottic Suction Port 6.0 , Tracheostomytube With Sub-Glottic Suction Port 7.0Mm , Tracheostomytube With Sub-Glottic Suction Port 7.5Mm , Tracheostomytube With Sub-Glottic Suction Port 8.0Mm , Tracheostomytube With Sub-Glottic Suction Port 8.5Mm , Tracheostomytube With Sub-Glottic Suction Port 9.0Mm , Tracheostomy Tube With Cuff Size- 3.5, 4.0, 4.5, 5Mm , Triple Extention Needlefree Connecter With Two Non Return Valves To Prevent Back Tracking Of Infusate , Triple Layer Multipurpose Extension Tube, Inner Pe Layer Outer Pvc Layer, Withstanding 145 Psi Pressure , Trup Set , Tube Ex Changer And Insertion Aid In One Size 2.5, 6.0 , Tulle Grass Paraffin Gauze Dressing Sterile Leno Weave With Soft Paraffin Base. Size 15Cm*2Mtr , Two Ply Disposable Face Mask , Umbilical Catheter (Polyurethane) 3.5G, 4.0G, 4.5G, 5.0G , Uncuffed Fenestrated Tracheostomy Tube Kit , Ureteral Dilator Set Teflon 4,6,,8,10,12 , Ureteric Ballon Dilator -4,4.5F Of 2&4 Cm Length , Urethral Catheter Made Up Of Soft Color Less,Clear, Breathable, Odorless, 100% Silicon Having White Opaque Line And White Cyclindercal Balloon Tip 5 To 10 Ml Balloon Capacity.Sizes- 8, 12,14,16,18 Should Be Us Fda Approved. , Urinary Drainage Bagpaed.(Uro Bag) , Urinary Drainage Bag Adult (Uro Bag) , Urine Pot Stainless Steel Suitable For Female , Urine Pot Stainless Steel Suitable For Male , Urinebag Connector , Urometer , Urostomy Pouch , V.P.Shunt High Pressur , V.P.Shunt Low Pressur , V.P.Shunt Medium Pressur , Vascular Heamostatic Extternal Pad 2”X2” T0 Control Surface Bleeding, Made Of Chitosin Material, Single Pack, Sterile , Ventilating Bougie With Oxygen Connector , Ventilator Circuit , Ventilator Tube , Wound Dressing Meshed Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46% 20X40 Cm , Wound Dressing Meshed Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46%10X10 Cm , Wound Dressing Meshed Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46%10X25 Cm , Wound Dressing Poly Utherin Foam Containing Centella Asiatica Extract: Nlt 0.6% With Silk Protein: 8% & Pva: 0.22%Silver Oxide 1.2% & Ploysorbate 80: 0.15% & Glycerol: 1.52% Pu Foam 10X25 Cm , Wound Dressing Poly Utherin Foam Containing Centella Asiatica Extract: Nlt 0.6% With Silk Protein: 8% & Pva: 0.22%Silver Oxide 1.2% & Ploysorbate 80: 0.15% & Glycerol: 1.52% Pu Foam 20X40 , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46%& Sliver Oxide:1.2% 20X40cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46%& Sliver Oxide:1.2% 10X10cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46%& Sliver Oxide:1.2% 10X25cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46%10X10 Cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46%10X25 Cm , Wound Dressing Sheet Containing Centella Asiatica Extract: Nlt 0.6%With Activated Silk Matrix 46%20X40 Cm , Wound Dressing Sprinkling Powder Containing Centella Asiatica Extract: Nlt 0.6%With Sliver Oxide: 1.2% &Silk Powder:8% 100Gms Jar , Wound Dressing Sprinkling Powder Containing Centella Asiatica Extract: Nlt 0.6%With Sliver Oxide: 1.2% &Silk Powder:8% 10Gms Bott. , Wound Dressing Sprinkling Powder Containing Centella Asiatica Extract: Nlt 0.6%With Sliver Oxide: 1.2% &Silk Powder:8% 50Gms Jar , X-Ray Cassette With Screen 10X12 , X-Ray Cassette With Screen 12X15 , X-Ray Developer 22.5 Ltr.Liquid Form , X-Ray Developer 22.5 Ltr.Powder Form , X-Ray Film Developing Hangers Tension Type Ss 10X12 , X-Ray Film Developing Hangers Tension Type Ss 12X15 , X-Ray Film Developing Hangers Tension Type Ss 8X10 , X-Ray Film Polyster Base Size 10”X12” (50 Sheet Pkt.) , X-Ray Film Polyster Base Size 12”X15” (50 Sheet Pkt.) , X-Ray Film Polyster Base Size 60.5”X8.5” (50 Sheet Pkt.) , X-Ray Film Polyster Base Size 8”X10” (50 Sheet Pkt.) , X-Ray Fixer 22.5 Ltr.Liquid Form , X-Ray Fixer 22.5 Ltr.Powder Form , Yonker Suction Set , Zebra Guide Wire 0.035,0.038 , Hand Activated Curved Coagulating Shear With Next Generation Adaptive Tissue Technology With Regulated Power Delivery For Improved Thermal Management& A Finer, Non-Stick Coated Blade, Shaft Compatible With 5 Mm Trocars, 36Cm Long, Capable Of Sealing Blood Vessels Up To 7 Mm In Diameter In Advanced Hemostasis Mode, Ergonomic Handle Inbuilt Transducercompatiblewith Thegenerator Gen11 , Advance Bipolar Hand Activated Probe For Open Surgery With 13Mm Shaft Diameter And 20 Cm Shaft Length, 6 Mm Wide Straight Jaw Design With Jaw Length Of 38 Mm ,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy , Having Separate Seal And Cut Buttons, Capable Of 360 Degrees Rotation Compatible With Gen11 , Advance Bipolar Hand Activated Probe For Lap Surgery With 5Mm Shaft Diameter And 37 Cm Shaft Length,,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy , Having Separate Seal And Cut Buttons, Capable Of 360 Degrees Rotationcompatible With Gen11 , Battery Operated Powered Circular Stapler With 3D Stapler Design And Atraumatic Gripping Surface Stapler Head 29Mm , Battery Operated Powered Circular Stapler With 3D Stapler Design And Atraumatic Gripping Surface Stapler Head 31Mm , Disposable Cautery Pencil With Ptfe Coated Electrode Tip For Minimal Sticking In Open Surgery , Laparoscopic ‘L’ Hook Electrode With Ptfe Coating For Minimal Tissue Sticking-33 Mm , All In One Hand Controlled Laproscopic Suction ,Coagulation, Cut ,Irrigation Assembly , All In One Ptfe Coated Lap Electrosurgical Elctrode Compatible With All In Hand Controlled Device , Powdered Oxidized Regenerated Cellulose Pre-Filled In An Easy-To-Use Applicator To Stop Continuous, Broad-Surface Oozing – Fast, Specifically On Large Friable Or Raw Surfaces ,3Gm , Oxidized Regenerated Cellulose Powder Endoscopic Applicator , Macro Porous Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber (6-0) And Poliglecaprone 25 Monofilament Fiber (5-0) With Pore Size 2.7 Mm Having A Weight Of 39 G/M2 And Containing Blue Orientation Stripes Of Polypropylene. , Macro Porous Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber (6-0) And Poliglecaprone 25 Monofilament Fiber (5-0) With Pore Size 2.7 Mm Having A Weight Of 39 G/M2 And Containing Blue Orientation Stripes Of Polypropylene , Macro Porous Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber (6-0) And Poliglecaprone 25 Monofilament Fiber (5-0) With Pore Size 2.7 Mm Having A Weight Of 39 G/M2 And Containing Blue Orientation Stripes Of Polypropylene. , Sterilant (H2o2) Hydrogen Peroxide Cassette Compatible With Sterrad Nx All Clear. , Chemical Indicator Strip For Plasma Sterilizer, Compatible To Sterrad Nx All Clear , Chemical Indicator Tape For Plasma Sterilizer, Compatible To Sterrad Nx All Clear , Two Ply Printer Paper Roll For Sterrad® Nx All Clear , Tyvek Pouch Roll 7.5 Cm X 70 M With Inbuilt Chemical Indicator Strip Should Be Compatible For Use In Sterrad System Which Should Be Endorsed By Usfda/510K Or European Ce. , Tyvek Pouch Roll 10 Cm X 70 M With Inbuilt Chemical Indicator Strip Should Be Compatible For Use In Sterrad System Which Should Be Endorsed By Usfda/510K Or European Ce , Tyvek Pouch Roll 15 Cm X 70 M With Inbuilt Chemical Indicator Strip Should Be Compatible For Use In Sterrad System Which Should Be Endorsed By Usfda/510K Or European Ce , Tyvek Pouch Roll 20 Cm X 70 M With Inbuilt Chemical Indicator Strip Should Be Compatible For Use In Sterrad System Which Should Be Endorsed By Usfda/510K Or European Ce , Tyvek Pouch Roll 25 Cm X 70 M With Inbuilt Chemical Indicator Strip Should Be Compatible For Use In Sterrad System Which Should Be Endorsed By Usfda/510K Or European Ce. , A Low Foaming With Mild Ph Solution Enzymatic Anionic Detergent With Sodium Tetraborate Decahydrate<8.5% As Rust Inhibitors Used For Manual As Well As Automated System Containing Four Enzymes Viz; Bacterial Protease<5%, Lipase<5%, Alpha-Amylase<5% And Cellulase<5%. Manual Soak Time For Highly Soiled Instruments Should Be Less Than 4 Minutes. The Product Must Be Biodegradable. , Adhesive Four Layer Foam & Hydrofiber Dressings With Viral, Bacterial Barrier Polyurethane Top Layer With 1.2% Impregnated Ionic Silver & Gel Forming Technology, Ce , Iso & Fda Approved , Hydrofiber Burns Dresssings With 1.2% Impregnated Ionic Silver With A Wear Time Of 21 Days & Gel Forming Technology , Ce , Iso & Fda Approved , Transleucent Foam Dressings With Waterproof, Viral, Baterial Barrier Polyurethane Top Layer With Perforated Gentle Silicon Adhesive, Ce , Iso & Fda Approved , Scissor Free Flat Mouldable Triple Hydrocolloid Wafer With Turtlenecking Effect With Standarad Opaque Drainable Pouch 12, With Charcoal Filter Embeded With Two Sided Hydrophobic Natural Fiber Comfort Panel With Integrated Dotted Velcro Tail Closure- 57 Mm , Single Piece Scissor Free Triple Hydrocolloid Based Cut To Fit Modified Flexible Tape Collar Skin Barrier With Elastomeric Polymers With 12 Pouch, 1-Sided Comfort Panel, Invisiclose® Tail Closure And Charcoal Filter Suitable For 57-70 Mm Stoma , 12 Curved Sinus Blade Rotatable, 4.0 Mm , 60 Curved Sinus Blade Rotatable, 4.0 Mm , Radenoid Pediatric Blade, 4.0 Mm, 40° Curved , 120 Curved Sinus Blade, 3.5 Mm , 90 Curved Sinus Blade, Rotatable, 3.5 Mm , 40 Curved Sinus Blade, Rotatable, 4.0 Mm , Tricut Sinus Blade, Rotatable, 3.5 Mm , Quadcut Sinus Blade, Rotatable, 4.3 Mm 13Cm , Irrigation Tubing For Blades And Burs , Silk Protein Based Sterile Surgical Pu Foam Dressing 20Cm X 20Cm , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Pu Foam Dressing 20Cm X 20Cm , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Pu Foam Dressing 10Cm X 10Cm , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Mesh Wound Dressing 20Cm X 40Cm , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Mesh Wound Dressing 20Cm X 25Cm , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Mesh Wound Dressing 10Cm X 25Cm , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Wound Dressing Sheet 20Cm X 40Cm , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Wound Dressing Sheet 20Cm X 25Cm , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Wound Dressing Sheet 10Cm X 25Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet 20Cm X 40Cm , Silk Protein Based Antimicrobial Wound Healing Ointment Loaded With Asiaticoside And Silver 250Gm , Silk Protein Based Antimicrobial Wound Healing Ointment Loaded With Asiaticoside And Silver 100Gm , Silk Protein Based Antimicrobial Wound Healing Ointment Loaded With Asiaticoside And Silver 50Gm , Silk Protein Based Antimicrobial Wound Healing Ointment Loaded With Asiaticoside And Silver 25Gm , Silk Protein And Nanosilver Based Microbicidal Sterile Surgical Wound Dressing Dusting Powder 100Gm , Silk Protein And Nanosilver Based Microbicidal Sterile Surgical Wound Dressing Dusting Powder 50Gm , Silk Protein And Antimicrobial Nano Silver Based Surgical Particle Wound Dressing 5Ml Vial , Silk Protein And Antimicrobial Nano Silver Based Surgical Particle Wound Dressing 10Ml Vial , Papain Urea And Silk Protein Based Debriding Ointment And Cream 100Gm , Papain Urea And Silk Protein Based Debriding Ointment And Cream 50Gm , Papain Urea And Silk Protein Based Debriding Ointment And Cream 25Gm , Povidone Iodine And Silk Protein Based Topical Antiseptic And Wound Healing Ointment 25Gm , Povidone Iodine And Silk Protein Based Topical Antiseptic And Wound Healing Ointment 50Gm , Povidone Iodine And Silk Protein Based Topical Antiseptic And Wound Healing Ointment 100Gm , Povidone Iodine And Silk Protein Based Topical Antiseptic And Wound Healing Ointment 250Gm , Silver Nitrate Hydrogel Wound Dressing 25Gm , Centella Asiatica Extract Based Skin Moisturization And Antiscar Gel 30Gm , Silk Protein Based Sterile Wound Dressing Sheet With Adhesive Backing For Non-Infected Wounds And Donor Site :Size: 10Cmx15cm, , Silk Protein Based Sterile Wound Dressing Sheet With Adhesive Backing For Non-Infected Wounds And Donor Site :Size: 12.5 Cm X12.5 Cm , Silk Protein Based Sterile Wound Dressing Sheet With Adhesive Backing For Non-Infected Wounds And Donor Site :Size:15 Cm X15cm , Silk Protein Based Sterile Wound Dressing Sheet With Adhesive Backing For Non-Infected Wounds And Donor Site :Size:10 Cm X20cm , Silk Protein & Nanocrystalline Silver Based Antimicrobial Sterile Wound Dressing Sheet With Adhseive Backing For Infected Wounds And Donor Sites: Size: 10Cm X 15Cm , Silk Protein & Nanocrystalline Silver Based Antimicrobial Sterile Wound Dressing Sheet With Adhseive Backing For Infected Wounds And Donor Sites: Size: 12.5Cmx12.5Cm , Silk Protein & Nanocrystalline Silver Based Antimicrobial Sterile Wound Dressing Sheet With Adhseive Backing For Infected Wounds And Donor Sites: Size: 15Cm X 15Cm , Silk Protein & Nanocrystalline Silver Based Antimicrobial Sterile Wound Dressing Sheet With Adhseive Backing For Infected Wounds And Donor Sites: Size: 10Cm X20cm , Silk Protein Based Highly Conformable Sterile Pu Foam Wound Dressing With Adhesive Backing For Non-Infected Wounds And Highly Exuding Wound.Size: 10 Cm X15cm , Silk Protein Based Highly Conformable Sterile Pu Foam Wound Dressing With Adhesive Backing For Non-Infected Wounds And Highly Exuding Wound.Size: 12.5Cm X 12.5Cm , Silk Protein Based Highly Conformable Sterile Pu Foam Wound Dressing With Adhesive Backing For Non-Infected Wounds And Highly Exuding Wound.Size:10Cm X20cm , Silk Protein Based Highly Conformable Sterile Pu Foam Wound Dressing With Adhesive Backing For Non-Infected Wounds And Highly Exuding Wound.Size:15Cm X15cm , Silk Protein & Nanocrystalline Silver Based Highly Conformable Antimicrobial Sterile Pu Foam Wound Dressing With Adhesive Backing For Infected Wounds And Highly Exuding Wound. Size:10Cmx15cm , Silk Protein & Nanocrystalline Silver Based Highly Conformable Antimicrobial Sterile Pu Foam Wound Dressing With Adhesive Backing For Infected Wounds And Highly Exuding Wound. Size:12.5Cm X12.5Cm , Silk Protein & Nanocrystalline Silver Based Highly Conformable Antimicrobial Sterile Pu Foam Wound Dressing With Adhesive Backing For Infected Wounds And Highly Exuding Wound. Size:10Cm X20cm , Silk Protein & Nanocrystalline Silver Based Highly Conformable Antimicrobial Sterile Pu Foam Wound Dressing With Adhesive Backing For Infected Wounds And Highly Exuding Wound. Size:15Cm X15cm , Silk Protein And Nanocrystalline Silver Based Highly Conformable Sterile Antimicrobial Dressing With Adhesive Backing And Absorbent Layer For The Surgical Sutured Site To Manage Exudates, And To Maintain Moist Microbe Free Environment.Size: 10Cmx15cm , Silk Protein And Nanocrystalline Silver Based Highly Conformable Sterile Antimicrobial Dressing With Adhesive Backing And Absorbent Layer For The Surgical Sutured Site To Manage Exudates, And To Maintain Moist Microbe Free Environment.Size: 12.5Cmx12.5Cm , Silk Protein And Nanocrystalline Silver Based Highly Conformable Sterile Antimicrobial Dressing With Adhesive Backing And Absorbent Layer For The Surgical Sutured Site To Manage Exudates, And To Maintain Moist Microbe Free Environment.Size: 15Cm X 15Cm , Silk Protein Based Highly Conformable Sterile Pu Foam With Antiscarring Properties And Adhesive Backingfor Minimizing And Prevent Scarring After Surgery And Closed Surgical Or Sutured Site Or Wounds:Size:9Cm X 9Cm , Silk Protein Based Highly Conformable Sterile Pu Foam With Antiscarring Properties And Adhesive Backingfor Minimizing And Prevent Scarring After Surgery And Closed Surgical Or Sutured Site Or Wounds:Size:12.5Cm X12.5 Cm , Silk Protein Based Highly Conformable Sterile Pu Foam With Antiscarring Properties And Adhesive Backingfor Minimizing And Prevent Scarring After Surgery And Closed Surgical Or Sutured Site Or Wounds:Size:15Cm X15cm , Silk Protein Based Sterile Non-Adherent Gauze Dressing To Cover The Wounds: Size:10Cm X8cm , Silk Protein Based Sterile Non-Adherent Gauze Dressing To Cover The Wounds: Size:15Cm X 8Cm , Silk Protein Based Sterile Non-Adherent Gauze Dressing To Cover The Wounds: Size:15.5Cm X 8.5Cm , Silk Protein Based Sterile Non-Adherent Gauze Dressing To Cover The Wounds: Size:20Cm X 10Cm , Silk Protein Based Sterile Non-Adherent Gauze Dressing To Cover The Wounds: Size:25Cm X 10Cm , Silk Protein Based Sterile Non-Adherent Gauze Dressing To Cover The Wounds: Size:30Cm X 10Cm , Silk Protein & Nanocrystalline Silver Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing To Minimize The Wound Infection And Facilitates Faster Wound Healing.Size:10Cm X8cm , Silk Protein & Nanocrystalline Silver Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing To Minimize The Wound Infection And Facilitates Faster Wound Healing.Size:15Cm X8cm , Silk Protein & Nanocrystalline Silver Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing To Minimize The Wound Infection And Facilitates Faster Wound Healing.Size:20Cm X10cm , Silk Protein & Nanocrystalline Silver Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing To Minimize The Wound Infection And Facilitates Faster Wound Healing.Size:25Cm X10cm , Silk Protein & Nanocrystalline Silver Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing To Minimize The Wound Infection And Facilitates Faster Wound Healing.Size:30Cm X10cm , Absorbable Porcine Gelatin Based Topical Absorbable Flowable Hemostat With 6Cc Syringe Pre-Filled With Hemostatic Matrix.2000 Iu Of Sterile Lyophilized Human Thrombin Total Volume 8Ml With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexible Applicator Tip , Hydrofiber Dresssings With 1.2% Impregnated Ionic Silver With Broad Spectrum Bactricidal Efficacy & Gel Forming Technology,Ce , Iso & Fda Approved Size ( 9X25) , Sinus Turbinate Reduction Paediatric Reflex Ultra Ptr With Integrated Cable , Routine Laryngeal Work, Procise Lw Wand With Integrated Cable , Paediatric Laryngeal Work Procise Mlw With Integrated Cable , Tonsillectomy Extra Capsular Evac 70 Xtra Hp With Integrated Cable , Cutting Loop Angled , Coagulation Electrode Pointed , Coagulation Electrode Ball Shaped 3Mm , Uniplulor High Frequesncy Cord With 4 Mm Plug Length 300 Cm , Hose Pipe For Storz Insuflattor , Bipolar High Frequesncy Cord With 4 Mm Plug Length 300 Cm , Biopsy Forcep For Forign Body Remover Flexibel Double Action Jaw 7 Franch , Ligasure Instrument For Open Surgeries With Instrument Length Between 18-19Cm And Electrode Length Between 16-17Mm, Having 28 Degree Curved Jaw With Contoured Tip For Blunt Dissection And Having Activation Through Hand Activation With A Manually Controlled Cutting Mechanism Usfda Approved , Ligasure Instrument For Open Surgeries With Instrument Length Between 21Cm And Electrode Length Between 20.6Mm, Having Nano Coated Curved Jaw With Contoured Tip For Blunt Dissection And Having Hand Activation With A Manually Controlled Cutting Mechanism Usfda Approved , Ligasure Instrument For Open Surgeries With Nano Coated 36Mm Jaw Length, 180 Degree Rotatable Instrument With Curved Blade For Large Volume Tissue. Should Have The Manual Cutting Mechanism. Usfda Approved , Ligasure Energy Instrument For Lap Surgeries With 5Mm Shaft Diameter With 37Cm Shaft Length & 20Mm Nano Coated Jaw Length, 350 Degree Rotatable Instrument With Curved Tip For Blunt Dissection. Should Have The Manual Cutting Mechanism.Usfda Approved , Ligasure Energy Instrument With 5Mm Shaft Diameter With 23Cm Shaft Length & 20Mm Nano Coated Jaw Length, 350 Degree Rotatable Instrument With Curved Tip For Blunt Dissection. Should Have The Manual Cutting Mechanism. Usfda Approved , Ligasure Energy Instrument With 5Mm Multifunctional Laparoscopic Device With Blunt Tip And 37Cm Shaft Length, Double Action Nano Coated Jaw For Tissue Fusion And Dissection, Having Activation Both Through Hand Activation And Foot Activation. Usfda Approved , Ligasure Energy Instrument With 5Mm Multifunctional Device With Blunt Tip And 23Cm Shaft Length, Double Action Nano Coated Jaw For Tissue Fusion And Dissection, Having Activation Both Through Hand Activation And Foot Activation. Usfda Approved , Pediatric Nebulizer Mask Kit With High-Performing Nebulizer Designed To Deliver At Angles Up To 90°. Design To Maximize For Placement, Without Sacrificing Aerosol Quality. To Use For Intermittent Aerosol Therapy And To Rely Upon To Deliver Both Performance And Economy. Consistent Performance At Angles Up To 90 Degrees Allowing Flexible Medication Delivery. Jet To Stay In Place Unless Intentionally Removed. Easy-Seal, Threaded, Cap And 6 Cc Capacity. Anti-Spill Jar To Prevent Leakage With Recommended Flow Rate Of 8 Lpm To Be Supplied With Standard, Universal Or Clear Connect Secure Tubing Connector For Nebulization Rate Of > 20 Ml/Min. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Nebulizer Kit With High-Performing Nebulizer Designed To Deliver At Angles Up To 90°. Design To Maximize For Placement, Without Sacrificing Aerosol Quality. To Use For Intermittent Aerosol Therapy And To Rely Upon To Deliver Both Performance And Economy. Consistent Performance At Angles Up To 90 Degrees Allowing Flexible Medication Delivery. Jet To Stay In Place Unless Intentionally Removed. Easy-Seal, Threaded, Cap And 6 Cc Capacity. Anti-Spill Jar To Prevent Leakage With Recommended Flow Rate Of 8 Lpm To Be Supplied With Standard, Universal Or Clear Connect Secure Tubing Connector For Nebulization Rate Of > 20 Ml/Min. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Nebulizer Mask Kit With High-Performing Nebulizer Designed To Deliver At Angles Up To 90°. Design To Maximize For Placement, Without Sacrificing Aerosol Quality. To Use For Intermittent Aerosol Therapy And To Rely Upon To Deliver Both Performance And Economy. Consistent Performance At Angles Up To 90 Degrees Allowing Flexible Medication Delivery. Jet To Stay In Place Unless Intentionally Removed. Easy-Seal, Threaded, Cap And 6 Cc Capacity. Anti-Spill Jar To Prevent Leakage With Recommended Flow Rate Of 8 Lpm To Be Supplied With Standard, Universal Or Clear Connect Secure Tubing Connector For Nebulization Rate Of > 20 Ml/Min. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Nebulizer Mouthpiece & Tee Connector Kit With High-Performing Nebulizer Designed To Deliver At Angles Up To 90°. Design To Maximize For Placement, Without Sacrificing Aerosol Quality. To Use For Intermittent Aerosol Therapy And To Rely Upon To Deliver Both Performance And Economy. Consistent Performance At Angles Up To 90 Degrees Allowing Flexible Medication Delivery. Jet To Stay In Place Unless Intentionally Removed. Easy-Seal, Threaded, Cap And 6 Cc Capacity. Anti-Spill Jar To Prevent Leakage With Recommended Flow Rate Of 8 Lpm To Be Supplied With Standard, Universal Or Clear Connect Secure Tubing Connector For Nebulization Rate Of > 20 Ml/Min. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Neonatal Nebulizer Kit Intended For Administration Of Small Volume Nebulizer Therapy During Neonatal Mechanical Ventilation With 10 Mm Id Circuits Each Kit To Includes 1 Each: Up-Draft Ii Opti-Neb Nebulizer; 12 In., 10 Mm Corrugated Tube; 22 Mm Od/18 Mm Id X 10 Mm Nebulizer Adaptor; 10 Mm X 7.5 Mm Connector; 10 Mm Id X 10 Mm Od Neonatal Tee; 7 Ft. Star Lumen Oxygen Supply Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Large Volume Disposable Nebulizer, 500 Ml, Each, Designed To Deliver Humidified Gas In Concentrations Ranging From 28 - 98% Lightweight And Easy To Use Bright Yellow, Venturi-Style Entrainment Ring With Incremental Dial For Setting Oxygen Concentrations. Polypropylene Jar To Hold Up To 500 Cc Sterile Water. Clearly Marked Water Levels. Individually Packaged. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Dual Limb Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Dual Limb Inspiratory & Expiratory Water Trap 22Mm Tubing,(For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Portable Ventilator Circuit With Universal Single Limb. Must Be Complete Kit With Main Circuit Hose, Exhalation Valve Manifold, Aerosol Hose, Patient Elbow Connector, Proximal Airway Pressure Line, Exhalation Valve Line, And Humidifier Limb. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Folyes Catheter Latex (2Way 5Ml)Urinarycatheterlatexshould Be Coated With3noblemetalsalloy(2Sides) Consisting Of Gold, Silver And Palladium.Should Reduces The Risk Of Cauti (Catheter Associated Urinary Tract Infections)Throughreductionofmicrobialadhesionandbiofilm Formation.Catheters Should Be Approved For Transurethral And Suprapubic Use For Up To 90 Days.Should Have Presence Of Hydrophilic Coating Internally And Externally In Addition. Should Be Available In Size: 2Way – 08 Fr& 10Frs Should Be Ec Approved. , Folyes Catheter Latex (2Way10ml)Urinarycatheterlatexshould Be Quoted With3noblemetalsalloy(2Sides) Consisting Of Gold, Silver And Palladium.Should Reduces The Risk Of Cauti (Catheter Associated Urinary Tract Infections)Throughreductionofmicrobialadhesionandbiofilm Formation.Catheters Should Be Approved For Transurethral And Suprapubic Use For Up To 90 Days.Should Have Presence Of Hydrophilic Coating Internally And Externally In Addition. Should Be Available In Size: 2Way – 12,14,16 &18 Fr Should Be Ec Approved. , Foley Catheter Latex(3 Way 30Ml) Urinarycatheterlatexshould Be Quoted With3noblemetalsalloy(2Sides) Consisting Of Gold, Silver And Palladium. Should Reducethe Risk Of Cauti (Catheter Associated Urinary Tract Infections)Throughreductionofmicrobialadhesionandbiofilm Formation.Catheters Should Be Approved For Transurethral And Suprapubic Use For Up To 90 Days.Should Have Presence Of Hydrophilic Coating Internally And Externally In Addition. Should Be Available In Size: 3Way – 18,20 & 22 Fr Should Be Ec Approved. , Foley Catheter Silicone(2 Way 5Ml)Urinarycatheterlatexshould Be Quoted With3noblemetalsalloy(2Sides) Consisting Of Gold, Silver And Palladium.Should Reducethe Risk Of Cauti (Catheter Associated Urinary Tract Infections)Throughreductionofmicrobialadhesionandbiofilm Formation.Catheters Should Be Approved For Transurethral And Suprapubic Use For Up To 90 Days.Should Have Presence Of Hydrophilic Coating Internally And Externally In Addition. Should Be Available In Size: 2Way – 6,8 &10 Fr Should Be Ec Approved , Foley Catheter Silicone(2 Way 10Ml)Urinarycatheterlatexshould Be Quoted With3noblemetalsalloy(2Sides) Consisting Of Gold, Silver And Palladium.Should Reducethe Risk Of Cauti (Catheter Associated Urinary Tract Infections)Throughreductionofmicrobialadhesionandbiofilm Formation.Catheters Should Be Approved For Transurethral And Suprapubic Use For Up To 90 Days.Should Have Presence Of Hydrophilic Coating Internally And Externally In Addition. Should Be Available In Size: 2Way – 14,16&18 Fr Should Be Ec Approved , Hydrofiber Dressing With 1.2% Impregnated Ionic Silver With Broad Spectrum Bactricidal Efficacy & Gel Forming Tech. Ce,Iso& Fda Approved , Calcium Hydroxyapatite Injectable Cement , Name Of Sutures , 1 /2 Cir Ccs Cut Needle 48 Mm Stainless Steel Length 45 Cm- 4 , 1 /2 Cir Ccs Cut Needle 48 Mm Stainless Steel Length 45 Cm- 5 , 1 /2 Cir Ccs Cut Needle 48 Mm Stainless Steel Length 45 Cm- 6 , 10-0 Double Arm Nylon Monofilament With 3/8 Circle Taper Point Needle , 11 Mm Optic View Bladeless Trocar With Bilateral Tissue Separator. , 12 Mm Optic View Bladeless Trocar With Bilateral Tissue Separator. , 15Mm Optic View Bladeless Trocar With Bilateral Tissue Separator. , 2-Octyl Cynoacrylatepropen, Topical Skin Adhesive,0.5Ml , 45 Mm Endoscopic Cutter And Stapler With Cambered Anviland C Shaped Knife With A Knife Blade Indicator , 22Mm Distal Jawopening And 8 Mm Proximal, Shaft Length Of 340Mm. , 5 Mm Optic View Bladeless Trocar With Bilateral Tissue Separator. , 5-0 Silk, Braded With 3/8 Circle Reverce Cutting Needle , 5Mm Medium Large Preloaded Multiple Clip Applicator With15 Clips, 8.8 Mm Closed Clip Length. , 60 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator , 22Mm Distal Jaw Opening And 8 Mm Proximal, Shaft Length Of 340Mm , 60 Poly Propylenewithcd Reverse Cuttingneedle 6/012 Foils , 8-0 Double Arm Nylon Monofilament With 3/8Circle Taper Point Needle , Absorbable (6-0) Braided Coated Polyglactin Aw Violet 8Mm 1/2 Circle Spatulated Micro Point Doublw Arm 45 Cm , Absorbable Surgical Suture Braided Polyglycolic Acid 3/8 Circle Reverse Cuttingg 12Mm 45 Cmspatulated Needle , Bb Silk With 1/2Cir. Cdcutting Needle 16 Mm Length 75 Cm- 3/0 , Bb Silk With 1/2Cir. Cdcutting Needle 16 Mm Length 75 Cm- 4/0 , Bb Silk With 1/2Cir.Rb Needle 20Mm Length 75 Cm- 1/0 , Bb Silk With 1/2Cir.Rb Needle 20Mm Length 75 Cm- 3/0 , Bb Silk With 1/2Cir.Rb Needle 30Mm Length 75 Cm- 2/0 , Bb Silk With 3/4.Revrse Cutting Needle 26 Mm Length 76 Cm- 3/0 , Bb Silk With 3/8 Cir. Reverse 2/0Cutting Needle 45 Mm Length 76Cm- 2/0 , Braided Polyamide * 0 6X45cm Pre-Cut , Blackmm , Braided Polyamide * 0 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 1 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 2-0 12X45cm Pre-Cut , Blackmm , Braided Polyamide * 2-0 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 3-0 12X45cm Pre-Cut , Blackmm , Braided Polyamide * 3-0 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 4-0 12X45cm Pre-Cut , Blackmm , Catgut Chromic Length 152 Cm Size 2 Without Needle , Chormic Catgut Absorbable Suture Compact Part Composed By Pirified Animal Intedtinal(Cattle And Sheep) Needle 1/2 Circle Round Body/Cutting Needle 76 Cm Size 6-0 , Chromic Catgut Suture Size-1,152 Cmwithout Needle , Chromic Catgut Suture Size-1-0, 152 Cmwithout Needle , Chromic Catgut Suture Size-2-076 Cm 1/2Crb 30 Mm , Chromic Catgut Suture Size-2-0,152 Cmwithout Needle , Chromic Catgut Suture Size-3-076 Cm 1/2Crb 20 Mm , Chromic Catgut Suture Size-3-0, 152 Cmwithout Needle , Chromic Catgut Suture Size- 1-0 76 Cm 1/2Crb 30 Mm , Chromic Catgut Suture Size-1,76 Cm 1/2Crb 40 Mm Heavy , Chromic Withcd Rb Needle 16 Mm Length 76 Cm Size 4-0 , Chromic Withst Rb Needle 50 Mm Length 76 Cm Size 2-0 , Chromic With 1/2Cirrb Needle40 Mm Length 76 Cm Size 5-0 , Chromic With 1/2Cirrb Needle45 Mm Length 100 Cm Size 1 , Chromic With 1/2Cirrb Needle45 Mm Length 100 Cm Size 2 , Chromic With 1/2Circle Rb Needle , Chromic With 1/2Circle Rb Needle 30 Mm Length 76 Cm Size 1-0 , Chromic With 1/2Circle Rb Needle 30 Mm Length 76 Cm Size 2-0 , Chromic With 1/2Circle Rb Needle 40 Mm Length 76 Cm Size 1-0 , Chromic With 1/2Circle Reverse Cutting Needle12 Mm Length 76 Cm Size 3-0 , Chromic With 5/8Cir Taper Cut Needle10 Mm Length 30 Cm Size 5-0 , Chromic With Cd Rb Needle 40 Mm Length 76 Cm Size 1-0 , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm , Oval Pledget 3X6mm,Firm Pledget,Penetratingtaper,1/2 Circle,16Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm, Firm Pledget,Taper Point,1/2 Circle,20Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm, Soft Pledget,Taper Point,1/2 Circle,20Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm,Firm Pledget,Taper Point,1/2 Circle,16Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm,Firm Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm,Soft Pledget,Taper Point,1/2 Circle,16Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 3X6mm,Soft Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 4.5X6mm,Firm Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X30/75Cm Da, Oval Pledget 4.5X6mm,Soft Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 4Blue & 4White 8X36/90Cm Da, Oval Pledget 3X6mm,Firm Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 Blue 1X30/75Cm Da, Oval Pledget 3X6mm, Firm Soft Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated ,Braided Polyester* 2-0 Blue 1X30/75Cm Da, Oval Pledget 3X6mm, Soft Pledget,Taper Point,1/2 Circle,20Mm Pledget Oval , Coated ,Braided Polyester* 2-0 Blue 1X30/75Cm Da, Oval Pledget 3X6mm, Soft Pledget,Taper Point,1/2 Circle,25Mm Pledget Oval , Coated Braided Fast Absorbing Polyglactin 910 Sut.With1/2 Cir Reversecutting Needle 36 Mm Length 90 Cm Size 1/0 , Coated Braided Fast Absorbing Polyglactin 910 Sut.With1/2 Cir Reversecutting Needle 40 Mm Length 90 Cm Size 1 , Coated Braided Fast Absorbing Polyglactin 910 Sut. 5/0 With3/8 Cutting Needle 16 Mm Length 45 Cm Size 5/0 , Coated Braided Fast Absorbing Polyglactin 910 Sut. With1/2Cir Round Body And 1/2 Cir Reverse Cutting Double Needle36 Mm Length 140 Cm Size 2/0 Undyed , Coated Braided Fast Absorbing Polyglactin 910 Sut. With1/2Cir Taper Cut Needle36 Mm Length 100 Cm Size 2/0 Undyed , Coated Braided Fast Absorbing Polyglactin 910 Sut.With 3/8 Cir Cuttingneedle16 Mm Length 45 Cm Size 4/0 Undyed , Coated Braided Fast Absorbing Polyglactin 910 Sut.With Curved Reverse Cuttingneedle11 Mm Length 45 Cm Size 5/0 Undyed , Coated Braided Polyglactin 910 Sut.With 1/2Cirrb Needle20 Mm Length 70 Cm Size 3/0 , Coated Braided Polyglactin 910 Sut.With 1/2Cirrb Needle40 Mm Length 90 Cm Size 1 , Coated Braided Polyglactin 910 Sut. With Circutting Needle36 Mm Length 70 Cm Size 3/0 , Coated Braided Polyglactin 910 Sut. With Sp Mpdouble Needle8 Mm Length 45 Cm Size 6/0 , Coated Braided Polyglactin 910 Sut.With Cdcutting Needle22 Mm Length 45 Cm Size 3/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With1/2 Cirrbneedle 20 Mm Length 70 Cm Size 4/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With1/2 Cirrbneedle 30 Mm Length 100 Cm Size 2/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With1/2 Cirrbneedle 40 Mm Length 100 Cm Size 1 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With1/2 Cirrbneedle 40 Mm Length 90 Cm Size 2/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With1/2 Circle Reverse Cuttingneedle 23 Mm Length 35 Cm Size 1 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With1/2 Circle Round Body Taper Point Needle 36.4 Mm Length 90 Cm Undyed Size 2/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With1/2 Cirrbneedle 20 Mm Length 75 Cm Size 3/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With1/2 Cirrbneedle 36 Mm Length 90 Cm Size 3/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With1/2 Cirrbneedle 40 Mm Length 100 Cm Size 1/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With1/2 Circle Reverse Cuttingneedle 40 Mm Length 100 Cm Size 1 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. With1/2 Circle Reverse Cuttingneedle 40 Mm Length 100 Cm Size 2 , Coated Braided Polyglactin 910 With Triclosan Coating Sut. Withcd Cuttingneedle 22 Mm Length 45 Cm Size 3/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.)With1/2 Cirrbneedle 30 Mm Length 100 Cm Size 1/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With1/2 Circle Reverse Cuttingneedle 36 Mm Length 90 Cm Size 1/0 , Coated Braided Polyglactin 910 With Triclosan Coating Sut.With1/2 Circle Round Body Taper Point Needle 36.4 Mm Length 90 Cm Undyed Size 1 , Coated Polyster Braided With Cd White D Needle 25 Mm (Curved Reverse Cutting Round Body Or Taper Cut) Length 90 Cm- 2/0 , Coated,Braided Lactomer0 90Cm, Violet37mm1/2 Circlereverse Cutting , Coated,Braided Lactomer0 90Cm, Violet40mm1/2 Circletaper Point , Coated,Braided Lactomer1 90Cm, Violet40mm1/2 Circlereverse Cutting , Coated,Braided Lactomer1 90Cm , Violet40mm1/2 Circletaper Point , Coated,Braided Lactomer2-0 75Cm, Violet30mm1/2 Circletaper Point , Coated,Braided Lactomer2-0 90Cm, Violet37mm1/2 Circlereverse Cutting , Coated,Braided Lactomer3-0 75Cm, Undyed24mm3/8 Circlereverse Cutting , Coated,Braided Lactomer3-0 75Cm, Violet22mm1/2 Circletaper Point , Coated,Braided Lactomer4-0 75Cm, Violet20mm1/2 Circletaper Point , Composite Mesh Polypropylene And Polyglactine 91010X15 Cm , Composite Mesh Polypropylene And Polyglactine 91015X15 Cm , Composite Mesh Polypropylene And Polyglactine 9106X11 Cm , Curve Cutter Reload With 2Mm Closed Stapler Height. , Curved Circular Stapler 25 Mm With Controlled Tissue Compression , Curved Circular Stapler 29 Mm With Controlled Tissue Compression. , Curved Circular Stapler 33 Mm With Controlled Tissue Compression. , Disposable Intraluminal Stapler Curved Circular Stapler 21 Mm With Controlled Tissue Compression. , Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of2 Mm And Open Staple Leg Length Of 4.1 Mm , Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Endoscopic Cutting And Stapling Devices 45Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of1.5Mm And Open Staple Leg Length Of 3.5Mm. , Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of2 Mm And Open Staple Leg Length Of 4.1 Mm , Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of1.5Mm And Open Staple Leg Length Of 3.5Mm. , Endoscopic Cutting And Stapling Devices 60Mm Reload Withcut Line Of 57Mm And A Staple Line Of 60 Mm With Closedstaple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Glass Ionomer Dental Cement- For Luting , Glycomer Mid-Term Absorbableknotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry 3-0 45Cm, Undyed24mm3/8 Circlereverse Cutting , Glycomer Mid-Term Absorbable Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry 3-0 45Cm , Undyed19mm3/8 Circlereverse Cutting , Glycomer Mid-Term Absorbable Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry 4-0 45Cm , Undyed19mm3/8 Circlereverse Cutting , Hemmorhoidal Circular Stapler 33Mm With Controlled Tissue Compression, Leg Length Of 4Mm. , Knife Blade Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Ligation Clips For 1 Mm Vessels With Lateral & Transverse Groove & Distal Tip Closure 20 Clips Per Cartage , Ligation Clips For 2 Mm Vessels With Lateral & Transverse Groove & Distal Tip Closure 6 Clips Per Cartage , Ligation Clips For 3 Mm Vessels With Lateral & Transverse Groove & Distal Tip Closure 6 Clips Per Cartage , Ligation Clips For 4 Mm Vessels With Lateral & Transverse Groove & Distal Tip Clos6 Clips Per Cartage , Linear Cutterof 55 Mm With Inbuilt Selectable Staple Height. , Linear Cutterof 75 Mm With Inbuilt Selectable Staple Height. , Linear Stapler 30 Mm Size With Controlled Tissue Compression. , Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Linear Stapler 90 Mm Size With Controlled Tissue Compression. , Long-Term Absorbablepolyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry *0 45Cm , Green37mm1/2 Circletaper Point , Long-Term Absorbablepolyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry *2-0 30Cm , Green37mm1/2 Circletaper Point , Long-Term Absorbablepolyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry *3-0 45Cm , Green26mm1/2 Circletaper Point , Long-Term Absorbablepolyglyconate Knotless Wound Closure Device With Unidirectional & Dual Angled Cut Barbs Geometry * Device 4-030Cm , Macro Porous Tissue Separating Multi Layered Partially Absorbablemesh With Oxidized Regenerated Cellulose, Polydioxanone And Soft Polypropylene Mesh Size 15 Cm X 15 Cm , Macro Porous Tissue Separating Multi Layered Partially Absorbablemesh With Oxidized Regenerated Cellulose, Polydioxanone And Soft Polypropylene Mesh Size 15 Cm X 20 Cm , Macro Porous Tissue Separating Multi Layered Partially Absorbable Mesh With Dual Sided Polyglecaprone 25 Film, Polydioxanone And Soft Polypropylene Mesh Size 15Cm X 15Cm . , Macro Porous Tissue Separating Multi Layered Partially Absorbable Mesh With Dual Sided Polyglecaprone 25 Film, Polydioxanone And Soft Polypropylene Mesh Size 15Cm X 20Cm . , Memory Knitted Transparent Polyproplene Hernia Sheath, 35Gsm, Pore Size-2.00 To 2.5Mm, Laser Cut Round Edges. Size-4X6, 6X6. , Monofilament Glycomer0 75Cm, Undyed37mm1/2 Circlereverse Cutting , Monofilament Glycomer0, 90Cm, Violet40mm1/2 Circletaper Point , Monofilament Glycomer1 ,90Cm, Violet40mm1/2 Circletaper Point , Monofilament Glycomer2-0 75Cm , Violet26mm1/2 Circletaper Point , Monofilament Glycomer3-0 75Cm, Undyed19mm3/8 Circlereverse Cutting , Monofilament Glycomer3-0 75Cm, Undyed24mm3/8 Circlereverse Cutting , Monofilament Glycomer3-0 75Cm , Violet26mm1/2 Circletaper Point , Monofilament Glycomer4-0 75Cm, Violet22mm1/2 Circletaper Point , Monofilament Glycomer4-0 75Cm , Undyed19mm3/8 Circlereverse Cutting , Monofilament Polyglyconate* 4-0 75Cm , Green17mm1/2 Circletaper Point , Monofilament Polyglyconate* 6-0 75Cm , Green13mm1/2 Circletaper Point , Monofilament Polyglyconate* 7-0 60Cm , Green9mm3/8 Circletaper Point ,Double Arm , Monofilament Polyglyconate* Cv 5-0 75Cm, Green12mm3/8 Circletaper Point , Double Arm , Monofilament Polyglyconate* Cv 6-0 75Cm, Green9mm3/8 Circletaper Point ,Double Arm , Monofilament Stainless Steel 2 2X45cm, 48Mm1/2 Circlereverse Cutting , Monofilament Stainless Steel 4 2X45cm, 48Mm1/2 Circlereverse Cutting , Monofilament Stainless Steel 5 2X75cm, 45Mm1/2 Circleblunt Point , Monofilament Stainless Steel 5 4X45cm, 45Mm1/2 Circletapercutting , Monofilament Stainless Steel 6 2X45cm, 45Mm1/2 Circletapercutting , No Knife Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Non Absorbable (10-0) Monofilament Polymide Black 6Mm 3/8 Circle Spatulated Micro Point Doublw Arm 38 Cm , Non Absorbable Braided Silk Black 10Mm 3/8 Circle Reverse Cutting Micro Point38 Cm , Non Absorbable Braided Silk Black 12 Mm 3/8 Circle Reverse Cutting Micropoint 38 Cm , Non Absorbable Surgical Suture(Braded Silk Black) Silk 6-0, 8Mm 3/8 Circle Reverse Cutting Micropoint , Oxidisedcellulose Absorbable Hemostate 2*14 Usfda Approved , Oxidisedcellulose Absorbable Hemostate 2*3 Usfda Approved , Oxidisedcellulose Absorbable Hemostate 4*8 Usfda Approved , Oxidised Regenerated Cellulose Absorbable Hemostate 1*2Usfda Approved , Oxidised Regenerated Cellulose Absorbable Hemostate 2*4Usfda Approved , Oxidised Regenerated Cellulose Absorbable Hemostate 4*4Usfda Approved , Pledget Oval 3X6mm Firm 10 Starnds Pledget Oval , Pledget Oval 3X6mm Soft 10 Strands Pledget Oval , Pledget Oval 4.5X6mm Firm 10 Strands Pledget Oval , Pledget Oval 4.5X6mm Soft 10 Strands Pledget Oval , Pledgets 10 3X3mm Firm Square Pledget , Pledgets 10 3X7mm Firmsquare Pledget , Poliglecaprone 25 Undyed With Irgacare Mp3-0,3/8 Circle Reverse Cutting,26Mm,70Cm , Poly Propylenewith1 /2 Cir Cc Double Needle (Indentical Guage Needle And Suture) 13 Mm Length60 Cm- 5/0 , Poly Propylenewith1 /2 Cir Cc Double Needle 13 Mm (Dential Guage Needle And Suture) Length75 Cm- 4/0 , Poly Propylenewith1/ 2 Cir Rb Heavy Needle 30 Mm Length 70 Cm – 1 , Poly Propylenewithcd Cut Rb Needle 16 Mm Length 60 Cm – 4/0 , Poly Propylenewithcd Rbneedle 16 Mm Length 70 Cm – 5/0 , Poly Propylenewithcurvedcut Needle 22 Mm Length 70 Cm – 3/0 , Poly Propylenewithcutting Needle 45 Mm Length100 Cm – 1 , Poly Propylenewith 1/ 2 Cirrbneedle 16 Mm Length 70 Cm – 4/0 , Poly Propylenewith 1/ 2 Cirrbneedle 16 Mm Length 70 Cm – 5/0 , Poly Propylenewith 1/ 2 Cirrbneedle 25 Mm Length 70 Cm – 3/0 , Poly Propylenewith 1/ 2 Cirrbneedle 30 Mm Length 70 Cm – 1/0 , Poly Propylenewith 1/ 2 Cirrbneedle 30 Mm Length 70 Cm – 2/0 , Poly Propylenewith 1/ 2 Cirrbneedle 40 Mm Length 70 Cm – 1 , Poly Propylenewith 1/ 2 Cirtaper Cut Dnlommlength 90 Cm – 3/0 , Poly Propylene 1/2 Cc Double Needle 16 Mm Length 90 Cm , Poly Propylene Black With Cdrbmpneedle 13 Mm Length 60 Cm – 5/0 , Poly Propylene Black With Cdrbmpneedle 8 Mm Length 60 Cm – 7/0 , Poly Propylene Mesh 15 Cm X 15 Cm , Poly Propylene Withrbdneedle 8 Mm Length 60 Cm – 7/0 , Poly Propylene With 1/2 Circle Rbdneedle 13 Mm Length 60 Cm – 5/0 , Poly Propylene With Cdrbdneedle 10 Mm Length 60 Cm – 6/0 , Polyamide 3/8 Circle 26 Mm Revrse Cuttingneedle Length 70 Cm – 3/0 , Polyamide 3/8 Circle 45 Mm Revrse Cuttingneedle Length 70 Cm – 2/0 , Polyamide Black Mono Filament Length 38 Cm - 8/0 , Polyamide With % Circle Rbneedle 40 Mm Length 100 Cm – 1/0 , Polyamide With Cd Cut Needle 16 Mm Length 70 Cm – 3/0 , Polyamide With Cd Cut R Cut Extra Penetrating Needle 16 Mm Length 70Cm – 4/0 , Polyamide With Cd Reverse 5/0 Cutneedle 12 Mm Length 70Cm – 5/0 , Polybutester With Polytribolate Coating* 2-0 90Cm, Blue26mm1/2 Circletaper Point ,Double Arm , Polybutester With Polytribolate Coating* 4-0 90Cm, Blue17mm1/2 Circletaper Point, Double Arm , Polybutester With Polytribolate Coating* 5-0 75Cm, Blue12mm3/8 Circletaper Point ,Double Arm , Polybutester With Polytribolate Coating* 5-0 75Cm, Blue13mm3/8 Circletapercutting ,Double Arm , Polybutester With Polytribolate Coating* 5-0 90Cm, Blue12mm3/8 Circletaper Point ,Double Arm , Polybutester With Polytribolate Coating* 5-0 90Cm, Blue17mm1/2 Circletaper Point ,Double Arm , Polybutester With Polytribolate Coating* 6-0 60Cm, Blue9mm3/8 Circletaper Point,Double Arm , Polybutester With Polytribolate Coating* 6-0 75Cm, Blue9mm3/8 Circletaper Point ,Double Arm , Polybutester With Polytribolate Coating* 7-0 60Cm, Blue8mm3/8 Circletaper Point , Double Arm , Polybutester With Polytribolate Coatingl* 3-0 90Cm, Blue26mm1/2 Circletaper Point ,Double Arm , Polybutylate Coated With Polyster Braided (Green) With 1 /2 Cir Taper Cut V-5 Double Armed Needle 17 Mm Length 90 Cm- 2/0 , Polybutylate Coated With Polyster Braided (Green) With 1 /2 Cir Taper Cut V-5 Double Armed Needle 25 Mm Length 90 Cm- 2/0 , Polydioxanone Irgacare Mpcoated122cm ,1 Loop Sgle Armed ,65Mm , Polydioxanone Irgacare Mp 70Cm M3 Usp2/0 Sgle Armed Sh,1/2 Circle ,Round Body,26Mm , Polydioxanone Irgacare Mp 90Cm M4 Usp1 Sgle Armed Ctx,I/2 Circle,48Mm , Polydioxanone With 1/2Cir Reverse Cutting Orthopaedic Surgery (Os) Nededle 40 Mm Length 90 Cm- 1 , Polydioxanone With 1/2Cir Round Body Heavy Needle 40 Mm Length 90 Cm- 1 , Polydioxanone With 3/8Cir Round Body Needle 11 Mm Length 45 Cm- 6/0 , Polydioxanoneirgacare Mp 70Cm M2 Usp3/0 Sgle Armed Rb-1,1/2 Circle ,Round Body,17Mm , Polydioxanoneirgacare Mp Coated 150Cm Usp1-0 Rb Ctx,I/2 Circle,48Mm , Polyglactin 8Mm 1/4 , Circle Spatulated Micro Point Double Needle- Length 45 Cm Size 6-0 , Polyglactin 910 Withtriclosan Coating1,1/2 Circle Reverse Cutting O.S,40 Mm,100Cm, , Polyglactin 910 Withtriclosan Coating1,1/2 Circle Round Body,40 Mm,100 Cm, , Polyglactin 910 Withtriclosan Coating1-0,1/2 Circle Reverse Cutting O.S,40 Mm,100 Cm, , Polyglactin 910 Withtriclosan Coating3-0,1/2 Circle Round Body,20 Mm,75 Cm, , Polyglactin 910 Withtriclosan Coating4-0,1/2 Circle Round Body,20 Mm,70 Cm, , Polyglactin 910 Withtriclosan Coating 1-0,1/2 Circle Round Body,40 Mm,100Cm, , Polyglactin 910 Withtriclosan Coating 2-0,1/2 Circle Round Body,30 Mm,100 Cm, , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 1, 1/2 Circle Reserve Cutting O.S,40 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 1, 1/2 Circle Round Body, 40 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 1-0, 1/2 Circle Reserve Cutting O.S,40 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 1-0, 1/2 Circle Round Body, 40 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 3-0, 1/2 Circle Round Body, 20 Mm 90 Cm , Polyglactin 910 With Triclosan (Irgacre Mp) Coating 3-0, 3/8 Circle Reserve Cutting 26 Mm 70 Cm , Polyglecaprone With 1/ 2 Cir Oval Rb Contrastneedle 26 Mm Length 70Cm- 3/0 , Polyglecaprone With 1/ 2 Cir Oval Rb Jb Needle 26 Mm Length 70 Cm- 2/0 , Polyglecaprone With 3/ 8 Cir Cutting Needle 26 Mm – 3/0 , Polyglecaprone With 3/8 Cir Reverse Cutting Needle 16 Mm- 4/0 , Polyglecaprone With Curved 5/0 Reverse Cutting Needle 16 Mm , Polypropylene2-0 Blue 90Cm V-20 Double Armed , Polypropylene7-0 60Cm, 6Mm3/8 Circletaper Point ,Double Arm , Polypropylene * 2-0 90Cm, Blue17mm1/2 Circletapercutting ,Double Arm , Polypropylene * 2-0 90Cm, Blue26mm1/2 Circletapercutting ,Double Arm , Polypropylene * Ii 3-0 90Cm, Blue17mm1/2 Circletaper Point , Double Arm , Polypropylene * Ii 3-0 90Cm, Blue17mm1/2 Circletapercutting ,Double Arm , Polypropylene * Ii 3-0 90Cm, Blue17mm3/8 Circletapercutting ,Double Arm , Polypropylene * Ii 3-0 90Cm , Blue26mm1/2 Circletapercutting ,Double Arm , Polypropylene * Ii 4-0 60Cm, Blue13mm1/2 Circletaper Point , Double Arm , Polypropylene * Ii 4-0 75Cm, Blue17mm1/2 Circletaper Point , Polypropylene * Ii 4-0 90Pledget , Blue17mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 4-0 90Cm, Blue17mm1/2 Circletaper Point ,Double Arm , Polypropylene * Ii 4-0 90Cm, Blue17mm1/2 Circletapercutting ,Double Arm , Polypropylene * Ii 4-0 90Cm, Blue22mm1/2 Circletaper Point ,Double Arm , Polypropylene * Ii 4-0 90Cm , Blue26mm1/2 Circletapercutting ,Double Arm , Polypropylene * Ii 5-0 60Cm, Blue10mm1/2 Circletaper Point , Double Arm , Polypropylene * Ii 5-0 60Cm, Blue12mm3/8 Circletaper Point , Double Arm,Black Needle , Polypropylene * Ii 5-0 75Cm, Blue12mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 5-0 75Cm, Blue13mm1/2 Circletaper Point ,Double Arm , Polypropylene * Ii 5-0 75Cm, Blue17mm1/2 Circletaper Point , Polypropylene * Ii 5-0 90Cm, Blue17mm1/2 Circletaper Point ,Double Arm , Polypropylene * Ii 6-0 60Cm, Blue12mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 6-0 60Cm, Blue13mm1/2 Circletaper Point , Double Arm , Polypropylene * Ii 6-0 60Cm, Blue13mm3/8 Circletapercutting ,Double Arm , Polypropylene * Ii 6-0 60Cm, Blue8mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 6-0 60Cm, Blue9mm3/8 Circletaper Point , Double Arm,Black Needle , Polypropylene * Ii 6-0 60Cm, Blue9mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 6-0 60Cm, Blue9mm3/8 Circletapercutting ,Double Arm , Polypropylene * Ii 6-0 75Cm, Blue11mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 6-0 75Cm, Blue12mm3/8 Circletaper Point , Double Arm,Black Needle , Polypropylene * Ii 6-0 75Cm, Blue12mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 6-0 75Cm, Blue13mm1/2 Circletaper Point , Double Arm , Polypropylene * Ii 6-0 75Cm, Blue9mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 7-0 2X60, Blue6mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 7-0 60Cm, Blue9mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 7-0 60Cm, Blue9mm3/8 Circletaper Point ,Double Arm,Black Needle , Polypropylene * Ii 7-0 60Cm , Blue9mm3/8 Circletapercutting ,Double Arm , Polypropylene * Ii 7-0 75, Blue10mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 7-0 75, Blue8mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 8-0 45, Blue6mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 8-0 45, Blue8mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 8-0 60, Blue6mm3/8 Circletaper Point ,Double Arm , Polypropylene * Ii 8-0 60, Blue8mm3/8 Circletaper Point ,Double Arm , Polypropylene , Blue2-0 Blue 75Cm ,Taper Point,1/2 Circle, 27Mm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 10 X 15 Cm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 10 X 15 Cm ,Usfda Approved , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 15 X 15 Cm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 15 X 15 Cm ,Usfda Approved , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 6 X 11 Cm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 6 X 11 Cm ,Usfda Approved , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 7.6 X 15 Cm , Polypropylene And Polyglecaprone 25 Composite Partialy Absorbable Monofilament Mesh Of Size 7.6 X 15 Cm ,Usfda Approved , Polypropylene Monofilament Sterile Precut Cd Reverse Cutting Needle 6-0 , Polypropylene,Blue,2-0 , 75Cm , Taper Point, 1/2 Circle, 37Mm , Protective Disk With Chgis A Hydrophilicpolyurethane Absorptive Foam With 52.5 G Chlorhexidine Gluconate ( Chg) 3/4 Disk ( 1.9 Cm) 1.5 Mm Center Hole With Radial Slit , Protective Disk With Chgis A Hydrophilicpolyurethane Absorptive Foam With 86.8 Mg Chlorhexidine Gluconate ( Chg)1 Disk ( 2.5 Cm) 7 Mm Center Hole With Radial Slit , Protective Disk With Chgis A Hydrophilicpolyurethane Absorptive Foam With 92 G Chlorhexidine Gluconate ( Chg)1 Disk ( 2.5 Cm) 4.0Mm Center Hole With Radial Slit , Ptfe Coated Cardiac Pacing Wire* 0 60Cm , 20Mm1/2 Circletaper Point , Ptfe Coated Cardiac Pacing Wire* 3-0 60Cm -2X12,17Mm1/2 Circletaper Point , Reload For Linear Stapler 30 Mm Size With Controlled Tissue Compression. , Reload Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Reload Linear Stapler 90 Mm Size With Controlled Tissue Compression. , Reloads For Re-Usable Linear Cutter 55 Mm With Closed Staple Height Of 1.5 Mm & 2 Mm , Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings & Separate Knife – Blade Module. , S112poly Propylenewithcd Rb Needle 13 Mm (02 Micron Length 60 Cm) , Skin Stapler With 35 Pins, Videx Coatingwithkick Off Spring Mechanism. , Suture Copolymer Of Glycolide And E-Caprolactone,2-0,,20Cm,26Mm,20 Anchors /Inch Unidirectional , Suture Copolymer Of Glycolide And E-Caprolactone,3-0,30Cm,3/8 Circle Rc 24Mm Needle,20 Anchors /Inch Unidirectional , Suture Dyed Polyester Poly (P-Dioxanone),1,36X36 Cm, 1/2 Circle Cutting 40Mm,20 Anchors/ Inch Biderctional , Suture Dyed Polyester Poly (P-Dioxanone),2-0,30Cm, 1/2 Circle 36Mm Rb, 20 Anchors /Inch Unidirctional , Suture Dyed Polyester Poly (P-Dioxxanone), 1-0,14X4 Cm, 1/2 Circle 36Mm Rb, 20 Anchors / Inch Bidirctional , Suture Dyed Polyester Poly (P-Dioxxanone), 1-0,24X4 Cm, 1/2 Circle 36Mm Rb, 20 Anchors / Inch Bidirctional , Universal Black Reload Compatible With The 55Mm Linear Cutter With Inbuilt Selectable Staple Height. , Universal Black Reload Compatible With The 75Mm Linear Cutter With Inbuilt Selectable Staple Height. , Other Items/Drops/Oint./Syp./Sol./Jelly. , 0.1 Gparacetic Acid, Other Ingredients : Corrosion Inhibitors, Surfactants, Stabilising Agents, Excipients.5000 Ml , 0.5% W/W Triclosan, Topical Antibacterial Solution Enriched With Emollients And Moisturisers, 500Ml , 1%W/V Available Iodine In A Non-Oxynol With Soluble Iodine Suractant Base With Sodium Iodide < 1% W/V And Surfactant < 5% W/V500 Ml , 100 G Of Gigazyme X-Tra Contains: 7.7 G Didecyldimethylammonium Chloride, 0.4 G Of Polyhexamethylene Biguanide. Contains Subtilisin, Polyhexamethylene Biguanide.5000 Ml , A Low Foaming Solution Clear Blue Enzymatic Detergant With Sodium Tetraborate Decahydrate As Cleanser And With Rust Inhibitors Used For Manual As Well As Automated System Containing Protease, Lipase, Amylase And Cellulase. 3. 8 Litres= 1 Gallon , Acyclovir Ointment 3% 5Gm , Adapalene 0.1% Gel , Aeroplane Splint , Air Mattress , Albendazole Susp.200Mg/5 Ml-10 Ml Bottle , Alcohol Based Instant Hand Sanitizer With Ethyl Alcohol (75%), And Triclosan (0.3%) Single Pack 500Ml Bottle. , Aldehyde Free Alcohol Based Rapid Disinfectant For Electronics And Medical Devices With Proponal-1(45G) Proponal-2(35G), Didecyl Dimethyl Ammonium Chloride 90.5G), Nalkyl Dimethyl Benzyl Ammonium Chloride (0.5G), And Poly-Hexamethylene Bigunide Hydro Chloride (0.5G) Single Pack - 500Ml Spray. , Alkalin Citrate With Potasium Sodium Oral Solution 100Ml , Alkyl Dimethyl Benzyl Ammonium Chloride 2.37% Alkyl Dimethyl Ethyl Benzyl Ammonium Chloride 2.37% With Intent Ingradient Approved From Internation Authority Like Usfda Usepa , All-Human (Bovine Aprotinin Free) Fibrin Sealant 1 Ml A) A Package (Different Skus - 1Ml, 2Ml, 5Ml) Containing: One Vial Each Of Bac2 (50-90 Mg/Ml Fibrinogen) And Thrombin (800-1200 Iu/Ml Human Thrombin) Frozen Solutionsb) All-Human Formulation Free Of Bovine Aprotinin C) Triple-Lumen Tip To Prevent Clogging Inside The Applicator D) Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures E) Maintains Fibronectin/Fibrinogen Ratio Within Physiologic Ranges , All-Human (Bovine Aprotinin Free) Fibrin Sealant 2 Ml A) A Package (Different Skus - 1Ml, 2Ml, 5Ml) Containing: One Vial Each Of Bac2 (50-90 Mg/Ml Fibrinogen) And Thrombin (800-1200 Iu/Ml Human Thrombin) Frozen Solutions B) All-Human Formulation Free Of Bovine Aprotinin C) Triple-Lumen Tip To Prevent Clogging Inside The Applicator D) Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures E) Maintains Fibronectin/Fibrinogen Ratio Within Physiologic Ranges , Aluminium Hydro Gel(Antacid) 170Ml Syp. , Amoxicillin Susp.125Mg/5Mg 30 Mkl Bott. Syp. , Amoxycilline+Clavulanic Acid Susp. I.P.( 200+28.5 Mg) 30Mlbottle , Ampicillin 250Mg/5Ml 30 Mlsyp. , Ankle Brace , Ankle Foot Orthosis Afo (Foot Drop Splint) , Antimicrobial Body Wash Containing 30% Ethanol & 1% Triclosan & Moisturiser 30 Ml , Antimicrobial Skin Cleanser Contains 2% C22h30cl2n10 As Active Antiseptic With Residual Action,And Has Undergone Soap Chamber Test Signifying Mildness.Also Containing Ethoxylated Alkylphenol And Fatty Acid Diethanolamide As Surfactantagainst Gram Positive, Gram Negative Bacteria, Yeast And Lipophilic Viruses 500 Ml , Antiseptic Hospital Concentrate 500Mlsyp. , Aqua, Cocamidopropylamine Oxide, Peg-7 Glyceryl Cocoate, Glycerin, Hydroxyethyl-Cellulose, Lactic Acid, Contains Allantoin 500 Ml , Aqua, Peg-40 Hydrogenated Castor Oil, Glycerin, Aroma, Sodium Gluconate, Sucralose, Octenidine Hcl, Citric Acid, Bht .(Alcohol Free, Chlorhexidine Free) 250 Ml , Aqua, Peg-40 Hydrogenated Castor Oil, Glycerin, Aroma, Sodium Gluconate, Sucralose, Octenidine Hcl, Citric Acid, Bht .(Alcohol Free, Chlorhexidine Free)60 Ml , Arm Pouch Sling , Artemeether + Lumefantrine 20+120/5Ml Syp. , Asthalin Respules , Atropine Sulphate Eye Drop 1% 5 Ml Vial , Atropine Sulphate Eye Ointment3%3Gm Tube , Azithromycin Susp.100Mg/5Ml 15Ml Bottle Syp. , Azithromycin Susp.200Mg/5Ml 15Ml Bottle Syp. , Barium Sulphatesusp.95%W/V 200Ml , Barium Sulphate Powder 200Gm , B-Complex Syp. 100Ml Syp. , Bedesonide Nasal Spray , Benzalkonium Chloride I.P-10%V/V, Didecyl Dimethyl Ammounium Chioride - 8%, (1 Liter And 5 Literpack) , Benzile Benzoate 25% Emulsion 25% , Benzile Benzoate Lotion25% , Benzyl Benoate Emulsion 25% 50Ml , Besacodyl Suppositories (Adult) , Besacodyl Suppositories (Child) , Betamethasone Ditropionate Lotion 0.05% 15 Gm Tube , Betamethasone Valerate + Gentamicin Sulphate 30Gm Gel. , Betamethasone Valerate 0.12% 15Gm Cream , Betaxolol 0.5% E/D , Bohler Braun Splint , Boric Acid Powder 400Gm Pkt. , Brimonidine 0.15% Eye Drop , Bromhexine Hydrochloride Syp.4Mg/5Ml 50Ml Bottlesyp. , Budesonide Nebulizing Suspension 0.5Mg/2Ml , C -Arm Cover , Caffine Citrate 1.5 Ml Oral Oral Solution , Caffine Citrate 3 Ml Oral Solution , Calamine Lotion , Calcitonin Inhaler , Calcitonin Spray , Calcium+Vitamin D3 Syrup 200Ml Syp. , Calcium Phosphate 82Mg/5Ml Syp. , Canister With Aqual Gel With Capacity 1000 Ml ( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Carbamezipine 100Mg/5Ml 100 Ml Bottle Syp. , Carboxy Metyl Cellulose 0.5% Eye Drop , Carnitine 500Mg/5Ml Syp. , Cefixime 50Mg/5Ml 30 Ml Bottle Syp. , Cefpodoxime 50Mg/5Mlsyp. , Cefuroxime 125Mg/5Ml 30 Ml Syp. , Cephalexine 125Mg/5Ml 30Ml Syp. , Cerumenolytic (For Ear Wax) Each 10 Ml Contanis Paradichlorobenzene 2% Benzocaine 2.7 % Chlorbutol 5% Turpenitine Oil 15% 10 Nl Vial , Cervical Collar Hard , Cervical Collar Soft , Cetirizine Syrup 45Mh/5Ml Syp. , Cetrimide +Chlorhexidine Solution , Cetrimide Cream Bp 1% 20Gm , Charcoal Activated (Powder) 100Gm Box/Pouch , Chloramphenicol Eye Applicaps 1% , Chloramphenicol Eye Drops 0.5% , Chlorhexidine Gluconate 02%W/V 50Ml Mouth Wash Solution , Chlorhexidine Gluconate Solution Ip 7.5 % V/V (Equivalent To Chlorhexidine Gluconate 1.5 % W/V), Cetrimide Ip 15% W/V 500 Ml , Chloroquinphosphate Syrup 30 Ml Syp. , Ciprofloxacin 5Ml Eye/Ear Drop , Ciprofloxacin Eye Drop 0.3% , Ciprofloxacin Eye Ointment , Ciprofloxacin0.3% +Dexamethasone 0.1% Eye/Ear Drop , Citric Acid For Dialysis Machine500gmpowder Form , Citrosteril Sterilising Solution For Dialysis Machine (5 Ltr.Pack) , Clarithromycin 125Mg/5Ml Syp. , Clavicular Brace , Clindamycin 5% 10 Gm Gel , Clobetasol Propionate 0.05% 15Gmoint. , Closed Suction System : Should Have Filtration System Along With Rotating Patient Access Valve To Enable Complete Isolation Of The Sleeved Suction Catheter From Patient Airway When Suctioning Is Not Required.System Should Have 03 Micron Hydrophobic Filter For Immediate Visual Identification Of Ch Size And Flushing Port Which Should Swivels 360 Degrees And Should Be Equipped With Built-In Non-Return Valve , Closed System For Hourly Urine Measurement - Closed Urine Measuring System With Graduated Transparent Chamber Starting From 1 Ml To 500Ml Capacity, Consisting Of Fine Measuring Sections With A Capacity And Two Non Return Valve,Collection Chamber. Dual Chambered 120Cm Kink Resistant Tubing, Tapered Connector With Kombicon Needle Free Sampling Port, Flexible Fastening Strap For Easy Hanging. Sterile Individually Packed In Peel Open Pack With 2 L Storage Capacity, , Clotrimazole +Tobramycin 15Gmoint. , Clotrimazole 1% W/V + Lignocaine 2% W/V Ear Drop 10 Ml Vial Bfs/Ffs Squeeze ( 10 Ml Vial) , Clotrimazole Cream 1% 15Gm , Clotrimazole+ Lignocaine Eye Drop , Clotrimazole+Beclomethasone Eardrop , Cloxacillin 125Mg/5Ml 30 Ml Syp. , Cockup Splint Dynamic , Cockup Splint Static , Concentrated Instrument Sterlizing Solution Containing 1, 6 Dihydroxy 2, 5 Dioxahexane 19.7 Gm And Gluteraldehyde 15.2 Gm 250 Ml , Cotrimaxazole 60Ml Syp. , Cotts Splint , Cough Expectorant 100Ml Syp. , Cough Syrup With Codeine , Cough Syrup(Dextromethorphen)100Ml , Cough Syrup(Peadirtic) 60Ml Syp. , Crepe Bandage , Crutches , Cyclopentolate 1%Eye Drop 5 Ml , Cyclosporine E/D 0.05% , Dexamethasone 0.1% + Chloramphenicol 1% E/ D , Dextromethorphan 10Mg/5Ml 60 Ml Bottle Syp. , Di Sodium Hydrogen 50Ml Syp. , Diclofenac Gel( Diclofenac Dodium+Capssacin+Menthol) , Diclofenac Suppository 100Mg. , Dicyclomine Syp. 30Ml Syp. , Digoxin Syp 100Ml , Disinfactat Hand Solution Ethanol 70W/W,Isopropyl Alcohol 10W/W,Aqua 10-19.9,Glycerin 1-1.9,T-Butyl Alcohol 1W/W,Carbomer 0.1-0.9,Aminomethyl Propanal<0.1 , Disinfecting/ Soaking Tray With Perforated Inner Liner And Lid Of Different Dimensions Made From Cx -1 Cx - 10 , Disodium Hydrogen Citrate 1.53 Gm/5Ml Syp. , Domperidon Sus.60Ml , Downs Blade , Dpi- Salbutamol + Declomethasone Inh. , Elbow Brace , Ensamycin Oint.50Gm , Enticavir 0.05Per Ml. 210 Ml Bottle , Erythromycin Susp.125/5Ml 30 Ml , Ethyl Chloride Spray 100Ml Inh. , Etiophylline+Theophylline Pead.Syp.(46.5+14Mg5 Ml) 100Ml Bottle , Eusol 500Mlfor Medicale Use , Eusol Solution 100Ml For Medicale Use , Extrication Collar Adult Adjustable : One-Piece Rigid Cervical Spine Immobilization Device With 16 Precise Settings For A Customized Fit. Flat Storage Radio Translucent, Cat & Mri Compatible ,Iso Certified , Extrication Collar Paediatric Adjustable Collar For Extrication :- Paediatric One – Piece Immobilisation Device With 12 Precise Setting In One Collar Suitable To Different Neck Sizes, Radio Translucent, Cat Mri Compatible. Iso Certified. , Fecal Management System Fecal Management System:Should Have Highly Flexible Silicone Catheter With Balloon And Two Ports For Irrigation And Inflation (45Ml), With Finger Cuff Pocket For Easy Insertion.It Should Have Odor Barriers And Must Conform To Sphincter Anatomy, Made Of Latex-Free And Pvc- Free Components, With At Least 3 Collection Bags With Odor Control. , Fluconazole Ear Drop , Fluconazole Eye Drop 3 Mg/Ml (10 Ml Vial) , Flurbiprofen Eye Drop 0.03% W/V , Flurometholone 0.1% Eye Drop , Fluticasone Nasal Spray , Fluticasone Respules 0.5Mg/2Ml Inh. , Forearm Brace , Formaldehyde (Formalin) 37% Acp 450Ml Bottle , Formaldehyde Free Suface Disinfectant, Non Carcinogenic, Non Toxic, Non Lrritant & Eco -Friendly Active Ingredients: In 100 Gms 8.8.G Glyoxal And 4.5 G Glutaral With 1% Dilution. Ce Listed & Dqsquality Certified. , Formeterol+Budesonide 120 +Mdi Inh. , Formeterol+Budesonide Rotacap 120 Mdi Inh. , Framycetin Sulphate 1 5W/W Cream , Functionalbrace , Fusidum Ointmet 50Gm , Fusidun Oint.50 Gm , G Graft , Gama Benzine Hexachloride Lotion 1% 100Ml , Gatifloxacin 0. 3% Eye Drop W/V 5 Ml , Gentamycin Ear Drop+Hydrocortisone Ear Drop 15Ml , Gentamycin Eye/Ear Drop 5Ml , Gentamycin+Betamethasone Eye/Ear Drop 3% , Glutaral Dehyde Lotion 2% W/V Stabilized5ltr.Cane , Glycerine 500Ml , Glycerine Enima , Glycerol 200 Gm Syp. , Glycine 1000Ml. , Hard Surface &E Environment Disinfectat-Sporicidal 1- Aldehyde Free. 2- International Approved. Ct Time: 15 Min 3- Max. Conta. 4- Didechyl Dimethyl Ammonium Chloride 5- Dilution 2-5%. 6 - Pack Size:1 Ltr. , Hemocoagulase Solution (0.2Cu) , Heparin Gel 50G , Hip Knee Ankle Foot Orthosis Hkafo (Calliper) , Hmf Sachet (Human Milk Fortifieer) , Hydoquinone Melalite 2% 30 Gm Oint. , Hydrocolloid Dressings: Self Adherent Moist Wound Dressing Made Up Of Triple Hydrocolloid Matrix With Elastomeric Polymer For Pressure Ulcers/Dry Wounds Size, 7.5X7.5 Cm, Oval, 15X15cm, 10X10cm , Hydrogen Peroxide Mouth Gargle 100Ml , Hydrogen Peroxide Sol. (Dilute) 400 Ml , Hydrogen Peroxide Sol.20% 400 Ml , Hydrogen Peroxide Sol.20% W/V 1Ltr.Bottle , Hydroquinone 2%+Oxybenzole 2.5%+Octinoxate 9%(Melalite 15%) 4% 20Gm E/D , Hydroxypropyl Methyle Cellulose Eye Onit. , Hydroxzine Hcl Syp. , Hygienic And Surgical Hand Disinfectant Gel Cont.Ethanol 85% With Skin Protection Factor 475 Ml-As Per En 1500 , Ibuprofen 100Mg/5Ml 60 Ml Bottle Syp. , Ibuprofen+Paracetamol 50Mg+100Mg/5Ml 30 Ml Bottle Syp. , Ice Cream Stick , Indacetrol 100 Mcg+Glycoperinium 50 Mg Inh. , Innovative Tenside System Containing 5-15% Anionic Surfectants, < 5 % Nonionic Surfectants, <5% Polycarboxylate, Enzymes. Other Excipients: Solubiliser, Corrossion Inhibitors 5000 Ml , Internal Nasal Splint , Ipratropium 500Mcg Respules , Ipratropium Bromide 20 Mcg Per Puff , Iron Drop 15Ml , Iron Ferrous Sulphate + Folic Acid 100Ml Syp. , Iron Syp. 200Ml , Ketoconazole 2% Lotion , Ketorolac 0.4% Eye Drop , Knee Ankle Foot Orthosis (Kafo) , Knee Brace Hinged , Knee Cap , Knuckle Bender Splint , Lactulose Solution Usp Eah 5Ml Cointains Lactulose Concentrate Usp Equivaient To Lactulose 3.325Gm Aqueous Base Q.S. , Lactulose Syp. 100 Ml , Latanoprosle E/D 40 Mg/Ml , Levocetrizine Syp.30 Ml , Levosalbutamol/Levalbuterol+Ipratropium Ruspules 3Ml , Levosulpride Syp. , Liganocaine Hydrochloride Jelly 2% 50Ml , Liganocaine Jely 4% 50Ml , Lignocaine Hydrochloride Eye Drop 4% 5 Ml Vial , Lignocaine Spray , Lignocaine Topical 4% Sol. , Linzolede Drop. , Liq.Ammonia , Liquid (1,2,Benzenedicarboxaldehyde) Cross Linking With Proteins And Denatures It, With Ph 7.2 -7.8 And Water Soluble Withus Fda And Epa Approved And Listed Under Tsca 5 Ltrs , Liquid Enviornment Disinfectant With Stabilizer By 0.01% W/V Agno3&H2po4 < 1Ppb And 11% W/V H2o2 Solution Formulated With A Patented Swiss Technology Having Ph 1.5 To 3.0 And 100% Volatile, Decomposing At Temperature > 100C (If Not Purified) 1 Ltr , Liquid Paraffin Ip 500Ml Bottle , Long Knee Brace , Lubricating (Hpmc) E/D , Lumbosacral Belt , Lysol (Cresol With Soap Solution) Soap , Magnisium Sulphate 50Ml , Mattress Protector : Should Made Up Of Breathable And Spacer Fibers. Breathable, Antimicrobial Finish, Elastic Fit, Washable, 36 X 72 Inches, Colour White, Blue And Green , Medial Arch Support , Metolazone Usp 5 Mg Oint. , Metronidazole Ointment , Metronidazole Syrup 100 Mg/5Ml30 Ml Bottle , Miconazolecream I.P. 2% W/W 15 Gm Tube , Miconazole 1% Beclamethasone Dipropionate 0.025%15Gm Ointment , Microbicital Antiseptic Solution 1%-1.5%V/V Poly (Hexamethylene Bigunide) Hydrochloride(Phmb) Resistence Free -Ph-6.5-7.5 Pack Size 500Ml , Midazolam Spray , Milk Of Megnasia+Liquid Paraffine 100Ml , Milky White Gel Based Hand Sanitizer:- 1- Ethanol (Cas-64-17-5): 58 To 62 % 2- Benzalkonium Chloride: 05 To 1% 3- Ph:Neutral 4- Contact Time 15 Sec. 5- Pack Size: 100Ml(With Dispenser) , Milky White Gel Based Hand Sanitizer:- 1- Ethanol (Cas-64-17-5): 58 To 62 % 2- Benzalkonium Chloride: 05 To 1% 3- Ph:Neutral 4- Contact Time 15 Sec. 5- Pack Size: 500Ml (With Dispenser) , Mometasone Furoate 0.10% 10Gmoint. , Moxifloxacin +Prednisolon 5Mh+3Mg 5 Ml Eye Drop , Moxifloxacin Eye Drop 0.5% , Multivitamin Drop 10 Ml , Mupirocin Ointment 2% W/W 5 Gm Tube , Nafazoline+Zinc,Boric Acid+Hpmc Eye Drop , Nanno Silver Gel Crytataline , Natamet Eye Drop , Neomycin Ointment 50Gm. , Neomycineeye Oint 15 Gm , Neomycine Sulphate + Bactracinoint 15 Gm Oint. , Neomycine-H- Oint 15 Gm , Octenidine Based Wash Lotion With Neutral Ph, Tested As Per European Norms Containing Octenidine Hcl,150 Ml , Octenidine Based Wash Mitts With Pratical Hand Dimension, Tested As Per European Norms Containing Octenidine Hcl,Aqua, Glycerine, Cocamidopropylamine Oxide, Sodium Lactate, Allantoin,Ethylhexyl Glycerine 10 Mitts , Ofloxacin S+Metronidazole30 Ml Syp. , Ofloxacin Susp.50Mg/5Ml 30 Ml Bottle , Ofloxacin+Dexamethasone E/D , Ofloxacine + Dexamethasone 10 Ml Eye Drop , Ofloxacine Ophthal Drop.5Ml , Ondensetron 2Mg/5Ml 30 Ml Bottle Syp. , Ors Packet Who Formula Sodium Chloride 2.6G, Potessium Chloride 1.5G, Sodium Citrete 2.9G Dextrose Inhydrous13.5G, 20.5 Gm Pouch , Oxymetazole Nasal Drops , Paracetamol Drop 100Mg/15Ml , Paracetamol Syp.125Mg/5Ml 60 Mlsyp. , Patient Cautery Plate , Patient Cautery Point , Patient Transfer Device:It Should Be Antimicrobial, Water Proof, Gamma Sterile And Durable.92 Gsm, Dimension: 1200Mmx1800 Mm, Colour: Whit: Thickness: 0.4Mm , Permethrin 2% 15Gm Lotion , Phenobarbitone 60 Mlsyp. , Phenylepherine Hci+Tropicamide 5% + 1% 5Ml E/D , Phenylephrine Hydrochloride 2.5Mg, Chlorpheniramine Maleate Ip 1 Mg, 15 Ml Bottle Syp. , Phenylephrine Hydrochloride 5 Mg, Chlorpheniramine Maleate Ip 1 Mg,Menthol 1 Mg. 60 Ml Bottlesyp. , Phenytoin Sodium Syp. 25Mg/Ml100ml Bottle , Philadelphia Collar , Pilocarpine Eye Drop 2% , Pilocarpine Eye Drop 4% , Pot.Chloride Syp. 100Ml , Povidon Iodine 5% Eye Drop. , Povidone Iodine 10% 100Ml Bottle , Povidone Iodine 5% 100Ml Bottle , Povidone Iodine 5% 500Ml Bottle , Povidone Iodine Hand Scrub 7.5% 500 Ml , Povidone Iodine Ointmet 5% 500Gm.Jar , Povidone Iodine Ointmet 7.5% 500Gm.Jar , Povidone Iodine Sol. 7.5% 500Ml Bott. , Povidone Iodine Surgical Scrub 500Ml Bottle , Povidone Iodine Surgical Scrub 7.5% 500 Ml , Prednisolone Acetate 0.1% E/D , Prednisolone Syp.30Ml , Promethazine Syp.5Mg/5Ml 30 Ml , Protein Powder 200Gm , Quinine Sulphate 150Mg/5Ml 60 Ml Bottlesyp. , Sacubitril/Valsartan 50Syp. , Salbutamol + Declomethasone 200Mdi Inh. , Salbutamol 40 Mg+Ipratropium 200 Mcg Inh. , Salbutamol Rotacap 200Mcg. Inh. , Salbutamol Solution For Nebulizer 5Mg/Ml Inh. , Salbutamol Sulphate Inhalation Inh. , Salbutamol Syrup 2Mg/5Ml 100 Ml Bottle , Salicylicacid Ointment 6%Oint. , Salicylic Acid 500Gm Pow. , Salmeterol25 Mcg +Fluticasone 125 Mcg Inhaler 120 Mdi Inh. , Shoulder Immobilizer , Silicon Heel Pad , Silver Sulfadizine Cream Usp 1% W/W 250Gm , Silver Sulfadizine Cream Usp 1% W/W 500Gm , Single Proteolytic Enzyme Subtilism 1-10% And Propylene Glycol 20-30%-Water Soluble Low Foaming Presoak Cum Cleaner, Bio-Burden Reducer. Boiling Point > 100 C With Neutral Phin 1 Ltr Pack1 Ltrs , Skin Antiseptic Tincture Of 2%W/W Chlorhexidine Gluconate With 70% Ethyl Alcohol Preparation 500 Ml , Small Foam Pu Dressing Kit Pu Form 12.5X18x3.3 Cm, Self Adhesive Drainage Tube With Irrigation Tube Adhesive Pu Drape ( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Small Foam Pu Dressing Kit Pu Form 7.5X10x3.3 Cm, Self Adhesive Drainage Tube With Irrigation Duct. Adhesive Pu Drape.( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Soda Lime 5 Kg. Cane , Sodium Chloride 5%10 Ml Eye Drops , Sodium Chloride 6% Eye Ointmentoint. , Sodium Furidate 10Gmoint. , Sodium Fusidate2% 10Gmoint. , Sodium Hypochloride 5% 1Ltr. , Sodium Hypochloride Solution 4%5Ltr. Cane , Sodium Valporate 200 Mg/5Ml100 Ml Bottlesyp. , Sodium Valprovate 200Mg/5Ml 100 Mlsyp. , Soframycincrem30 Gm , Steenbeck Brace , Sterilant Cold Disinfectant For Dialysis Containing Peracetic Acid Hydrogen Peroxide Acetic Acid(5 Ltr Can) , Sterilant Hot Disinfectant For Dialysis Containing 21% (Approx) Citric Acid, Malic Acid, Lactic Acid(5 Ltr Can) , Sterisol-C (Electrolyte Concentrate Soln.)(5 Ltr.X4 ) 20 Ltr.Pack , Sucralflate Susp.100Ml , Sulfacetamide Eye Drop 20% , Sulfamethoxazole+Trimethoprim Susp0200mg+40Mg In 5Ml 60 Mlsyp. , Sulfamethoxazole200 Mg + Trimethoprim 40 Mg Per Ml Syrup50 Mlbottlesyp. , Sumag Ointment 30 Gmoint. , Surface & Environmentdisinfectant –Critical Area 1-Aldehyde Free 2-Us-Epa Approved 3-Max.Contact Time: 10 Min. 4. -Octyl Decyl Dimethyl Ammonium Chloride- 6 To 7% Dioctyl Dimethyl Ammonium Chloride- 2 To 3% Didecyl Dimethyl Ammonium Chloride- 3 To 4% Alkyl Dimethyl Benzyl Ammonium Chloride- 8.68% 5-Dilution 0.39% 6--Pack Size:1 Ltr. , Surface End Environment Disinfectant Conc.With Dimethanol 14.1 G And Gluteraldehyde 5 Gm 500Ml , Surgical Scrub Containing 0.5% W/W Hexachlorophene And Moisturiser 500Ml , Surgical Sprit Bp- 5 Ltr.Cane , Surgical Sprit Bp-500Ml Bottle , Synthetic Casting (Fibreglass) 6 , Synthetic Casting(Fibreglass) 4 , Syp.Vitamin A 10000U/Ml (100Ml Bottle) , Tacrolimus 0.03% 10Gmoint. , Taylors Brace , Terbinafine Hydrochloride 1% 10Gmoint. , Theophylline 100Mg/10Ml Syp. , Thomas Splint , Thrombo Phobe Oint.15Gm , Thumb Abduction Splint , Timolol Maleat 05% 5Ml Vial Eye Drop , Tinidazole 150 Mg/5Ml 60 Ml Bottlesyp. , Tinture Benzoin Compound Solution , Tobramycin.03% 5 Mleye Drop , Tobramycine 0.3% +Dexamethasone .01% Eye Drop , Toe Spacer , Tolnafrate+Iodochlorhydroxyquin 5Gmoint. , Tretinoin 0.025% 15Gm , Tricholine Citrate 0.550 Mg Sorbitol 7.15 G/10Ml 100 Ml Bottlesyp. , Triclophos 500Mg/5Mlsyp. , Tropicamide Eye Drop 1% 5Ml Vial , Turn Buckle Splint , Ventriculoperitoneal Shunt High Pressure , Ventriculoperitoneal Shunt Low Pressure , Ventriculoperitoneal Shunt Medium Pressurepressure , Vitamin D3 Drop , Vitamin Edrop 10 Ml , Walker , Walking Stick , White Petroleum Jelly 1000G , Wrist Brace , Xylometazolinenasal Drop 0.1% , Recombinant Human Epidermal Growth Factor Gel Presentation: 15 Gm Route Of Administration: For External Use Only Composition: Each Gram Contains: Purified Bulk Of Rh-Epidermal Growth Factor ........ 60 ?G Sodium Methylparaben Ip ............ 1.8 Mg Sodium Propylparaben Ip ........... 0.2 Mg Excipients ............Q.S +B5b7b2:B6b2:B6b7b2:B6b2:B7b2:B6 , Recombinant Human Epidermal Growth Factor Gel Presentation: 7.5 Gm Route Of Administration: For External Use Only Composition: Each Gram Contains: Purified Bulk Of Rh-Epidermal Growth Factor ........ 60 ?G Sodium Methylparaben Ip ............ 1.8 Mg Sodium Propylparaben Ip ........... 0.2 Mg Excipients ............Q.S , Recombinant Human Epidermal Growth Factor Gel Presentation: 15 Gm Route Of Administration: For External Use Only Composition: Each Gram Contains: Purified Bulk Of Rh-Epidermal Growth Factor ........ 150 ?G Sodium Methylparaben Ip ............ 1.8 Mg Sodium Propylparaben Ip ........... 0.2 Mg Excipients ............Q.S , Recombinant Human Epidermal Growth Factor Gel Presentation: 7.5 Gm Route Of Administration: For External Use Only Composition: Each Gram Contains: Purified Bulk Of Rh-Epidermal Growth Factor ........ 150 ?G Sodium Methylparaben Ip ............ 1.8 Mg Sodium Propylparaben Ip ........... 0.2 Mg Excipients ............Q.S , Absorable Gelatin Based Topical Absorable Flowable Hemostat With 6 Cc Syringes Pre Filled With Hemostatic Matrix With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexiable Applicator Tip , Cyproheptadine 2Mg + Tricholine 275Mg/5Ml Sorbitol Base Syrup , Fusidic Acid 2% Cream 10 Gm Tube , Methyl Salicylate ,Menthol,Camphor,Eucalyptus Oil,Diclofenac Diethylamine Eqvlnt To Diclofenac Sodium 15 Gm Ointment Or Gel , Fusidic Acid 30 Mg , Beclomethasone Dipropionate 25 Mg Tube 20 Gm , Sodium Fusidate 20 Mg Powder , Cyproheptadine Hydrochloride 1.5 Mg Drops 15 Ml , Salbutamol Sulphate 1 Mg, Ambroxol Hcl 15 Mg, Guaiphenesin 50 Mg And Metnolated Syrup Base On Each 5 Ml In 100 Ml Bottle , Tablet Salbutamol Sulphate 2 Mg, Ambroxol Hcl 15 Mg, Guaiphenesin 100 Mg , Each 5 Ml Contains Levosalbutamol 1 Mg, Ambroxol Hcl 30 Mg, Guaiphenesine 50 Mg Syrup-60 Ml And 100 Ml , Each 5 Ml Contains Dextromethorphan Hydrobromide 10 Mg, Chlorphrniramine Maleate 2 Mg , Mentholated Sugar Free Base In 100 Ml Syrup , Heparin Sodium Topical Solution 1000Iu/Ml, 5Ml , Methylcobalamin Nasal Spray 250Mcg/Spray 2.3Ml , Diclofenac Diethylamine, Methyl Salicylate, Menthol And Absolute Alcohol Topical Solution 30Ml , Diclofenac Diethylamine Bp 2.32% W/V, Methyl Salicylate Ip 10% W/V Menthol Ip 5% W/V & Absolute Alcohol Ip 10% V/V Intopicalsolution Base 30Ml , Topical Heparin Solution 1000 Iu/Ml,5Ml Vial , Etomidate Mct 2Mg/Ml Emultion For Injection , Lab. Items , Albumin 100Ml , Alkaline Phospahatase 100Ml , Anti-A1 Lactin 5Ml Vial , Anti-Ab-Sera 5Ml Vial , Anti-A-Sera Igm 10Ml Vial , Anti-B-Sera Igm 10Ml Vial , Anti-D-Sera Igg+Igm10ml Vial , Anti-D-Sera Igm 10Ml Monoclonal , Anti-H-Sera 10Ml Vial , Auto Disable Syringe Integrated Without Fix Needle 2Ml , Auto Disable Syringe Integrated Without Fix Needle 5Ml , Baby Care Sheets : Super Absorption Surface, Spill Proof, Antimicrobial Finish, Easy To Wash, Size: 0.7M X 0.5 M , Bacitracin+Neomycin+Polymyxin B Powder , Bacterial Filter ( Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Bb Silk With 1/2Cir.Rb Needle 25Mm Length 75 Cm- 3/0 , Bilayer Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 2Iinx2 In) , Bilayer Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 4Iinx10 In) , Bilayer Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 4Iinx5 In) , Bilayer Meshed Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 2Iinx 2 In) , Bilayer Meshed Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 4Iinx 10 In) , Bilayer Meshed Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 4Iinx 5 In) , Bilayer Meshed Dermal Regeneration Template ( Bovine Collagen And Glycosaminoglycan (Chondroiting-6- Sulface ) And Silicone Layer (Bilayer) 8Iinx 10 In) , Bilirubin T+D 100Ml , Blood Bag Single 350Ml , Bovine Albumin 5Ml Vial , Calcium 50Ml , Chikengunea Elisa Test , Chikengunea Rapid Test , Coombsahg Sera 5Ml Vial , Creatinine 100Ml , Deionized Water 5Ltr.Cane , Dengue Elisa Test , Dengue Rapid Test( Antigen + Antibody) , Diclofenac Diethylamine Bp1.16% W/W Equivalent To Diclofenac Sodium Bp 1% W/W Gel Base Q.S. , Disposable Flexible Video Bronchoscope:Monitor 8.5 Inches Color Tft Lcd Screen With Touch Operation. With 8 Gb Of Internal Storage. 3 Hrs Of Battery Operation, Data Storage Capability, Usb Facility, Compatible With Plug And Play Flexible Scopes Of Inner Diameter Of 1.2, 2.2 & 2.8Mm. , Double Blood Bag 350Ml Cpda , Double Blood Bag 450Ml Cpda , Drevkins Reagent 5 Ltr.Cane , E.D.T.A. Vacunater With Needle 3Ml , E.D.T.A.(K-3) Vial 3Ml , Flexiseal (Fecial Management System Should Have Highly Flexible Silicon Catheter With Ballon And Two Ports Of Irrigation And Infleation (45Ml) With Finger Cough Pocket. It Should Have Odor Barrier. Latex Free Pbc Free With Atleast Three Collection Bag With Odor Control ) , Glass Ionomer Dental Cement- For Restoration , Glass Slides (75Mm X 25Mm ) , Glucose 500Ml , Gv Paint , Hbs Ag Elisa 96 Test Kit , Hbs Ag Rapisd Card Test , Hcv Rapid Cad Test , Hcvelisa Kit (Hcv Micro Elisa Ag+Ab 4Thgeneration) 96 Test Kit , Hiv Elisa Kit (Hiv Micro Elisa Ag+Ab 4Thgeneration) 96 Test Kit , Hiv Rapid Card Test , Hiv Rapid Test ( Ag+Ab 4Thgeneration) , Hiv Rapid Test (Flowthrouh) , Hospital Curtain:100% Polyester, Flame Retardant, Antimicrobial, Water Repellent, Antistatic, Anti-Dust, Mould Proof, Strain Relief. , K3 Blood Vaccutaineredta-Vial , Kangaroo Mother Care : Breathable Fabric, Skin To Skin Contact Between Mother And Baby, Hands Free Mode To Perform Daily Activity, Sterlized, Washable For Multiple Use. Size, Small, Medium And Large Colour, Melange, Baby Pink, Blue , Lactic Acidbacillus Sachet , Leishmans Stain 500Ml Bottle , Malaria Card Test Pv/Pf Antigen , Manual Rescitator With Built In Pressure Limitation ( Adulat With Face Mask Of Size ¾ And 5 Tidal Volueme 1300 Ml Autoclave Reservoir Bag 1500 Ml 100% Latex Free Double Layred Single Shutter Value, Hand Strap, Minimum 25 Time Autoclavabele ) , Manual Resuscitators With Built In Pressure Limitation – Paediatric/Neonate With Face Mask Of Size 0 & 2 Max. Tidal Volume - 300 Ml; Auto Clavable Reservoir Bag With Volume- 1500 Ml/Volume 100% Latex Free Outer Cover & Double Layered. Single Shutter Valve, Integrated Hand Strap, Autoclavable Upto 25Times Minimum With Supporting Documents/Test Reports ,Pressure-Limiting Valve ,Provision To Attach Pressure Manometer And Peep Valve, Usfda ,Ce & Iso Certified , Micropipette 1Ml , Micropipette Tips100ml , Micropipette Tips20 Ml , Micropipette Tips200ml , Micropipette Tips50 Ml , Micropipette Tips 10 Ml , Ointment Containing Centella Asiatica Extract: Nlt 0.6% With Sliver Oxide: 1.2% & Silk Extract 8% : 46% 100Gm Jar Oint. , Paediatric Blood Bag 100Ml , Penta Blood Bag 350Ml , Plain Disposable Vial 3Ml , Plain Vial 12X75 With Screw Cap , Pre Sterile Flexible Video Scope For Visualization:Fibreless Video Scope Available With Three Optional Sizes Of Inner Diameter 1.2Mm, 2.2Mm & 2.8Mm With Working Length Should Be 600Mm. Should Have Suction Port & Oxygen Delivery Port. Should Be Compatible With Monitor Size Of 8.5. Iso Compliant, European Ce Or Usfda. , Pricking Lancet , Protein 1Ml , Quardraple Blood Bag 350Ml , S Got 100Ml , Sgpt100ml , Supraglotic Airway Device With Integrated Gastric Port And Intubation Capabilitry Reinforced Tip With Gastric Drainage Port And Intubating Laryngeal. Pilot Balloon Withtactile Indication, Mri Safe And Phthalate Free Material. Integrated Bite Absorption Area. Soft & Thin Cuff & Available With Sizes 1,1.5,2,2.5,3,4,5,6 Usfda Ce & Iso Certified , Tacrolimus0.5 , Test Tube 100X12mm Borosilicate , Tips For Micro Pipette(2-1000Ul) 1000 Nos , Tips For Micro Pipette(2-200Ul) 1000 Nos , Tissue Paper Roll , Transfer Blood Bag 300Ml , Tripleblood Bag 350Ml Cpda , Tripleblood Bag 350Ml Sagm , Tripleblood Bag 450Ml Cpda , Tripleblood Bag 450Ml Sagm , Typhoid Rapid Card (Igg+Igm) , Urea 100Ml , Vdrl Rpr Test , Wound Dressing Poly Utherin Foam Containing Centella Asiatica Extract: Nlt 0.6% With Silk Protein: 8% & Pva: 0.22%Silver Oxide 1.2% & Ploysorbate 80: 0.15% & Glycerol: 1.52% Pu Foam 10X10 Cm , Y Connector (Form Dressing Kit Should Be Gamma Sterlised Woth Sterilization Report. Should Be Ce Certified And Drug Controller Approved) , Dental Items , 2% Chlorhexidine Disposable Disinfectant Wipes,0.5% Accelerated Hydrogen Peroxide, Size: 7 X 8 Us Fda Certified , 2) Kfiles-- 20 (21Mm) , 47% Parachloropherol +5 % Phenol And 38%Lignocaine Base Pulp Devitalizer For Root Canal Therapy , Addition Silicon Impression(Material To Besuplied With Bothheavy And Light Body) , Amalgam Polishing Kit , Articulating Strips , Assimilatory Roll 37Gsm With Perforation , Biodegradable Material , Autoclavable S.S Bur Box , Autoclavable S.S Endo Box , B) Medium , B) Taper Long(Pointed) , B)Wedges Plastic , Biocampatible Fda Approved Collagen Membrane , Bone Graft Hydroxyappetite + Beta Tricalcium Phosphate , Brushes(For Post Scaling Polishing) , C) Inverted Cone , C) Small , C)Wedges Transparent Light Transmitting , Calcium Hydroxide And Iodoform Paste , Calcium Hydroxide Dental Cement Powder , Cheek Retractor- Large & Small , Composite Polishing Kit , Condensation Silicon Impression (Material To Be Suplied With Bothheavy And Light Body) , Contains Diclofenac Diethyolamoniummgel Bp 1.16% W/W Equivalent To Diclofenac Sodium Bp 1.0% W/W In A Gel. , D) Round , Denta Plug Bioactive Resorbable Graft With Collagen, Hydroxylapatite And Chlorhexidine , Denta Plug- C Absorbable Collagen Hemostat With Boric Acid And Furacillin , Diamond Burs For Crown Preparation A) Straight Long , Diclofenac Sodium Ip 50Mg Gelatin Enrobed (Softlet) Enteric Coated , Didecyl Dimethyl Ammonium Chloride : 8.7%, N-Alkyl Dimethyl Benzyl Ammoniumchloride : 8.19%, Lauryl Amine Amine Oxide:0.1-1.5%, Ethylene Diamine Tetra Acetic Acid Sodium Salt, Sodium Bicarbonate,Us Epa Certified , Disinfectant For Medical Devices- Optho Phthaladehyde 0.55%W/V 5 Liter Can. , Disposable Patient Drapes , E) Taper Long(Flattened) , Edta Syringe For Root Canal , Endodontic Files- 1) K Files--#15(21Mm) , Enzymatic Cleaner For Dental Instruments Mixture Of Protease, Amylase,Lipase,Celluase 39%. 1 Liter Bottle , F) Chamfer Or Torpedo Point , Fogging Solution - N Alkyldimetyl Benzyl Ammonium Chloride (Bkc) Ip-13.6% W/V, Didecyl Dimethyl Ammonium Chloride 13.0% W/V, Polymeric Biguanide Hydrochloride (Phmb)-5.0%1 Liter Bottle. , Freeze Dried Bone Graft , Freeze Dried Demineralized Bone Graft (Fddb) , G) Flare Shaped , Gates Glidden Drills(Number 1 To 6) , Gutta Percha Hand Protaper F1 (21Mm) , Gutta Percha Hand Protaper F1 (25Mm) , Gutta Percha Hand Protaper F2 (21Mm) , Gutta Percha Hand Protaper F2 (25Mm) , Gutta Percha Hand Protaper F3 (21Mm) , Gutta Percha Hand Protaper F3 (25Mm) , Gutta Percha Hand Protaper S1(25 Mm) , Gutta Percha Hand Protaper S1 (21Mm) , Gutta Percha Hand Protaper S2 (21Mm) , Gutta Percha Hand Protaper S2 (25Mm) , Gutta Percha Hand Protaper Sx (21Mm) , Gutta Percha Hand Protaper Sx (25Mm) , Gutta Percha K File 15(21Mm) , Gutta Percha K File 15(25Mm) , Gutta Percha K File 20(21Mm) , Gutta Percha K File 20(25Mm) , Gutta Percha K File 25(21Mm) , Gutta Percha K File 25(25Mm) , Gutta Percha K File 30 (21Mm) , Gutta Percha K File 30 (25Mm) , Gutta Percha K File 35 (21Mm) , Gutta Percha K File 35 (25Mm) , Gutta Percha K File 40 (21Mm) , Gutta Percha K File 40 (25Mm) , Gutta Percha K File 45 (21Mm) , Gutta Percha K File 45 (25Mm) , H Files --15 (25Mm) , H Files --20 (25Mm) , H Files --25 (21Mm) , H Files --25(25Mm) , H Files --30 (21Mm) , H Files --30 (25Mm) , H Files --35 (25Mm) , H Files --35(21Mm) , H Files --40 (25Mm) , H Files --40(21Mm) , H Files --45 (21Mm) , H Files --45 (25Mm) , H) Disc , Hand Protapersf1 (21Mm) , Hand Protapersf1 (25Mm) , Hand Protapers F2 (21Mm) , Hand Protapers F2 (25Mm) , Hand Protapers F3 (21Mm) , Hand Protapers F3 (25Mm) , Hand Protapers S1 (21Mm) , Hand Protapers S1 (25Mm) , Hand Protapers S2 (21Mm) , Hand Protapers S2 (25Mm) , Hand Protapers Sx (21Mm) , Hand Protapers Sx (25Mm) , Hydroxy Apatite Bone Graft , Intra Articuler Hyaluronic Acid Visco Supliment 22Mg/Ml , K Files --15 (25Mm) , K Files --20 (25Mm) , K Files --25 (21Mm) , K Files --25(25Mm) , K Files --30 (21Mm) , K Files --30 (25Mm) , K Files --35 (25Mm) , K Files --35(21Mm) , K Files --40 (25Mm) , K Files --40(21Mm) , K Files --45 (21Mm) , K Files --45 (25Mm) , Kidney Trays , Ligt Curing Nano Hybrid Composite Kit , Matrix Bands-Ivory No 8 , Matrix Retainer- Tofflemaire , Oxidized Cellulose Hemostat 5 X 7.5 Cm , Periodontal Dressing Pack (Coe Pack) , Plastic Instrument Holding Trays-A) Large , Plugger 20 (21Mm) , Plugger35(21Mm) , Plugger35(25Mm) , Plugger40 (25Mm) , Plugger45 (25Mm) , Plugger 15 (21Mm) , Plugger 15 (25Mm) , Plugger 20 (25Mm) , Plugger 25 (21Mm) , Plugger 25 (25Mm) , Plugger 30 (21Mm) , Plugger 30 (25Mm) , Plugger 45 (21Mm) , Plugger40 (21Mm) , Polishing Paste After Composite , Polishing Paste After Scaling , Proximal Polishing Strips For Composite , Reamers 15 (21Mm) , Reamers 15 (25Mm) , Reamers 20 (21Mm) , Reamers 20 (25Mm) , Reamers 25 (21Mm) , Reamers 25 (25Mm) , Reamers 30 (21Mm) , Reamers 30 (25Mm) , Reamers 35(21Mm) , Reamers 35(25Mm) , Reamers 40 (21Mm) , Reamers 40 (25Mm) , Reamers 45 (21Mm) , Reamers 45 (25Mm) , Rubber Cups (For Post Scaling Polishing) , Rubber Dam Kit , Silver Powder , Spreader20 (21Mm) , Spreader 15 (21Mm) , Spreader 15 (25Mm) , Spreader 20 (25Mm) , Spreader 25 (21Mm) , Spreader 25 (25Mm) , Spreader 30 (21Mm) , Spreader 30 (25Mm) , Spreader 35(21Mm) , Spreader 35(25Mm) , Spreader 40 (21Mm) , Spreader 40 (25Mm) , Spreader 45 (21Mm) , Spreader 45 (25Mm) , Sterilization Roll Autoclavable 75Mm , Sterilization Roll/ Pouch Sealing Machine , Teeth Bleaching Kit , Torque Controlled Endomotorwith Handpiece , Vita Shade Guide , Wedges A) Wooden , Zinc Oxide Eugenol Temporary Restorative Dental Material , Zinc Phosphate Dental Cement , Zinc Polycarboxylate Dental Cement , Dental Items , (Pciol) Lens 12.0 , (Pciol) Lens 14.0 , (Pciol) Lens 15.0 , (Pciol) Lens 16.0 , (Pciol) Lens 17.0 , (Pciol) Lens 18.0 , (Pciol) Lens 19.0 , (Pciol) Lens 19.5 , (Pciol) Lens 20.0 , (Pciol) Lens 20.5 , (Pciol) Lens 21.0 , (Pciol) Lens 21.5 , (Pciol) Lens 22.0 , (Pciol) Lens 22.50 , (Pciol) Lens 23.0 , (Pciol) Lens 23.5 , (Pciol) Lens 24.0 , (Pciol) Lens 24.5 , (Pciol) Lens 25.0 , (Pciol) Lens 25.5 , (Pciol) Lens 26.0 , (Aciol) Lens 18.0 , (Aciol) Lens 19.0 , (Aciol) Lens 20.0 , (Aciol) Lens 21.0 , Sfiol) Lens 19.0 , Sfiol) Lens 20.0 , Sfiol) Lens 20.5 , Sfiol) Lens 21.0 , Sfiol) Lens 21.5 , Sfiol) Lens 22.0 , Sfiol) Lens 22.5 , Sfiol) Lens 23 , Sfiol) Lens 23.5 , Sfiol) Lens 24
Contract Date: Nov 07, 2022 Contract Value : ₹ 50.00 Lakh
Government Departments No of Bidders 18
Madhya Pradesh View Result →
TenderDetail
Loading tenders