View Bid Results For Load Testing Tenders

We found 6607 Bid Results related to load testing tenders. You can find Contractor details who won load testing tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–50 of 6607 tenders matching your filters

Youth Affairs and Sports and Culture #11506047 AOC

Repairing And Maintenance Of Transformer And Other Ht Equipments Installed At Government School Village Playground Velim Salcete Goa (Iind Call) -Servicing ofHT Main Cubical Metering Unit including repairs,maintenance of the panel by a) Opening of Cubical Metering unit, Cleaning of Internal cable terminal, CT, PT unit, Busbar repairing the damaged parameters etc.b) Application of Antitracking Spray to CT, PT, Cable Terminal to improve IR value avoiding moistures and shot circuits inside panel c) checkig the insulcoat and reapplication of Alternate layer of insulcoat Part A & B mixture one by one for panel safety as per the Electricityrulesd) Testing and Commissioning of cubical Metering Unit and restarting the panel supply. 2 Painting of the LBS by Removal of rust by scrapping panel and repainting the main panel & Check Cubical Metering Unit Painting with material 3 Repairing, Servicing & Commissioning of the 11KV Ring Main Unit 4 Servicing of 11KV Load Break Switch including repairs due to the flash over occured, theswitch needs tobe opened and cleaned including to removemoisture antitracking and application of insulcoat alternate layer Part A & B mixtue one by one. 5 Painting of Load Break Switch with Material 6 Supply & Installation of 30Amps HRC Fuse and Commissioning 7 160 KVA, 11/0.433KV Transformer painting with material 8 Maintenance of 160KVA, 11/0.433KV Transformer by carring out a) Transformer main tank oil filtrationb) BDV value testing of transformer oil before filtration and after filtrationc) identifying oilleakage and rectification work of same with required labour and material cost d) Transformer testing and commissioning 9 Supply & Top up of Transformer oil 10 Supply & Installation of Silica Gel breather 11 SubStation Yard Painting with material 12 LT Main Panel Maintenance Work Panel Servicing, Replacement of defective MCB, replacement of damaged wirringcleaning of the panel etc. 13 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC coverhaving locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil.c)Watering GI pipe, 20mm, Class B,with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). (a) In soily strata 14 Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B,with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft blackagriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement (plumbing will be paid seperately).In soily Strata 15 Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt) 16 Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required 17 Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required 18 Supply of4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm 19 Supply of2 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 2 Core 2.5 sq.mm 20 Supplying and erecting integrated LED street light fitting 120W IP65 & IK08 class having single piece pressure die-cast aluminium housing,aving system lumens output of Min. 13000 Lumens, min. efficacy of 110 lumen/W, CRI>70,CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty of Make Philips/Crompton/Wipro/KasperNet/Jaquar/surya as directed by Engineer incharge. 21 Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warrantyMake Philips/Crompton/ Wipro/KasperNet/Jaquar/surya as directed by Engineer incharge. 22 Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty of make of make Kasper T NET/Philips/Lighting Technology/ Jaquar/surya as directed by Engineer Incharge. 23 Supplying and erecting LED square / circular Max. 14 W downlighter/Panel Light having pressure die-cast aluminium housing, polystyrenediffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. rippleof 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.of make Kasper T NET/Philips/ Lighting Technology/Wipro as directed by Engineer Incharge. 24 Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (a) Cat A 25 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata 26 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface,etc.complete as required

Contract Date: Jul 06, 2026 Contract Value : ₹ 10.13 Lakh

Government Departments No of Bidders 4

Goa View Result →

Health and Family Welfare #11504494 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 6

Haryana View Result →

Railways #11503646 AOC

Supply Of supply and commissioning of tensile load testing machine , supply and commissioning of tensile load testing machine (hydraulic insulator testing jig) for 25 kv porcelain and composite insulators as per rdso specification no.ti/spc/ohe/instest/0091(08/2024) or latest [ warranty period: 30 months after the date of delivery ] ]

Contract Date: Jul 07, 2026 Contract Value : ₹ 3.89 Lakh

Government Departments No of Bidders 1

Gujarat View Result →

Railways #11503483 AOC

Supply Of design fabrication, supply, erection, testing & commissioning of light load run test facilities for traction motor and auxiliary motors of wag-9/wap7 locos. , design fabrication, supply, erection, testing & commissioning of light load run test facilities f or traction motor and auxiliary motors of wag-9/wap7 locos as per attached technical specification. make/ brand: power guard or equivalent. [ warranty period: 30 months after the date of delivery ] ]

Contract Date: Jul 07, 2026 Contract Value : ₹ 15.22 Lakh

Government Departments No of Bidders 1

Madhya Pradesh View Result →

Defence #11501073 AOC

Bids Are invited for Calibration Services - Mechanical; Pressure, Tseting And Calibration Of Load Testing Bed; Any Other Government Approved Labs / Service Provider, Nabl Labs; Buyer Premises (Onsite)

Contract Date: Ref. Documents Contract Value : ₹ 2.17 Lakh

Government Departments No of Bidders 4

Andhra Pradesh View Result →

Public Administrative Department #11499188 AOC

Contract Date: Jul 04, 2026 Contract Value : ₹ 90,618

Government Departments No of Bidders 2

Kerala View Result →

Housing Urban and Rular Development #11496846 Technical Bid

Tender for Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer, Mechanical & Hospital Division Gmch Jammu. Recapitalisation/Reconditioning Of 400 Kva Servo Stabilizer Installed At Abhinav Theatre, Jammu Mhdj/E-Nit 38 Of 2026-27 Dated: 11.05.2026 Due : 18.05.2026 Bidder Name : Price Schedule (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Rate Including Gst To Be Quoted By The Bidder Rs. P Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Rebate On Old Parts In Percentage (%) If Any Excise Duty Vat Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Net Cost Of Item Rs. P Total Amount Total Amount With Taxes Total Amount In Words , Recapitalisation/Reconditioning Of 400 Kva Automatic Voltage Servo Stabilizer Installed At Abhinav Theatre Jammu By Way Of Disconnecting Of All Incoming And Outgoing Cable Connections, Loading/Lifting Of Servo Stabilizer On The Pick Up Vehicle By Employing The Hydra Crane, Moving Of The Same To Workshop And Then Unloading Of The Same In The Workshop Premises With The Help Of Hydra Crane. Job Includes Dismantling And Opening Of 400 Kva Servo Stabilizer By Skilled Labour Unfastening Nuts Bolts Of Top Cover There By Extracting Out The Field Coils/Legs Along With Core And Removing Of Damaged/Worn-Out Parts, Providing And Fitting Of Dimmer Coil-02 Nos, Auto Control Cards-03 Nos, Digital Display Servo Card- 03 Nos In Place Of Damaged Ones, providing and Fixing Of Servo Motor- 03 Nos, Buck-Boost Transformer-02 Nos, Reconditioning Of Copper Wounded Main Coil-03 Nos. providing and Fixing Of Phase Indicators, Voltmeter & Amperemeter Along With Selector Switch As Per Requirement. Chemical Earthing As Per Standards. Lubrication Of All The Gear Of Servo Motor, Servicing Of Oil Chamber By Checking Of Leakages. Assembling Of Stabilizer, Filling It With Old Transformer Oil After Giving It Proper Heat Treatment And Topping It With Fresh Transformer Oil 300 Ltrs Up To The Required Recommended Level So That All Coils Are Fully Immersed In The Oil, Making Connections Of Voltage Stabilizer Input And Output Side By Connecting The Cable. Job Also Includes Red Oxide Coating And Denting/Painting, Welding On The Container, Providing And Fitting Of Ht/Lt Thimbles As Per Site Requirement After Proper Crimpling And Insulation To The Cable End Terminals. Job Also Includes Reassembling Of The Whole Unit By Skilled Labour Charging The Stabilizer On No Load And Then Testing The Stabilizer On Full Load. Shifting Back Of The Servo Stabilizer On Pick Up Vehicle With The Help Of Hydra Crane To The Abhinav Theatre And Unloading Of The Same With The Help Of Hydra Crane, Reconnecting Of The Same To The Ht Transformer, Stabilizing Of All Incoming And Outgoing Connections With The Circuit And Testing On Full Load By Skilled Labour. Complete Job Comprises Of Cost Of Material And Labour Charges, Tools And Tackles, Transportation Charges And Other Unforeseen Material For Execution Of Job And Taxes Thereof Including Rebate On Old Wornout Parts. Total In Figures 23 23 0.0 23 Inr Zero Only Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jammu And Kashmir View Result →

Power #11494630 Technical Bid

Tender For Biennial Maintenance Contract (Bmc), Form 01.08.26 To 31.07.28, Under Testing Department At Sgtpp-1. Cleaning Of All Control And Protection Related Panels And Equipments. 2. Assistance In Troubleshooting, Rectification, Minor Repairing Of All Type Of Electromagnetic Relays, Static &Numerical Relays. 3. Assistance In Troubleshooting, Rectification, Replacement Or Repairing As Required For Control Circuit, Electrical Measuring Instruments (Meter); Switches; Electrical Transducer, Oti,Wti Transmitter, Annunciator; Control Fuse; Contactor And All Other Associated Equipments/Items Inside The Panels In All Related Area. 4. Assistance In Testing Of Different Relays-Voltage, Current, Frequency, Power, Impedance Etc. 5. Assistance In Testing Of Thermal Over Load Relay, Mcb, Contactors, Timer, Fuse Etc. 6. Assistance In Identification Of Dc Earth Fault At Sgtpp Plant And Rectification Of 220Vdc Earth At The Area Of Testing Department. 7. Assistance In Testing And Calibration Of Meters And Transducer- Voltage, Current, Frequency, Power Factor, Watt,Var, Va Etc. 8. Assistance In Trouble Shooting, Maintenance And Testing Of All Type Of Electronic Modules In All Related Area Under Testing Dept. 9. Assistance In Testing Of All Electrical Installations At Site Or Shop Or Laboratory Such As Generator, Transformer, Circuit Breaker, Ct, Pt, Lightning Arrestor, Motor, Cvt, Reactor, Ngr, Isolator, Control Cable Andpower Cable Etc.Arrangement For Testing Also Be Done By Contractor For Any Location In Sgtpp Area. 10. Assistance In Testing Of Transformer Oil (Bdv, Moisture Content, Tan Delta) Etc. 11. Assistance In Reading Of Static Energy Meter Through Mri Only And Optical Communication Cord By Laptop Also Testing & Calibration Of Different Type Of Energy Meters. 12. Assistance In Testing Of Battery Bank Cells. 13. Assistance To Testing Department Related With Protective Relays, Electrical Instruments, And Different Power Control Panel/Board, System Testing Of All Electrical. Items/Equipment Of 2X300Mw & 2X500 Mw And 1X660Mw Units Of Sgtpp (Plant & Township Areas As Per Direction Of The Controlling Dept.) Like Existing Contract. 14. Shifting Of All Kind Of Testing Instruments And Other Necessary Tools And Tackles From Lab To Site And From Site To Lab Should Be Under The Scope Of Work Of Amc Manpower.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

West Bengal View Result →

Drinking Water Supply and Sanitation #11494250 Technical Bid

Tender for Supply Installation Testing and Commissioning of Dewatering Pump Sets And Allied Works At Meethapur Online Bps In Badarpur Constituency Ac-53. , Supply Of Portable Dewatering Submersible Pump Set For Dewatering Muddy Water, Containing Sand, Silt Etc. Of Capacity 5 Hp Having Discharge Of 500-600 Lpm At 16-18 Mtrs. Head, Delivery Size 50 Mm Suitable For 415 Volt, 3 Phases, 50Hz A.C Supply Along With 05 Mtrs., Waterproof Cable. (Make- Su/Mody / Kbl/ Djb Approved. , Supply Of Control Panel With On-Off Arrangement In Sheet Metal Enclosure Suitable For 5 Hp Pump Set Comprising Of Ampere Meter, Voltmeter, Dol Starter, Indicating Lamps, Single Phase Protection, Oveload Relay Duly Fixed Along With Control Wiring Etc. Make:- C&S/L&T/Mody/Djb Approved. , S/O Gi Pipes 50 Mm Dia Size Medium Class With Gi Flange Welded In Both Sides 3 Mtr Long With Ms Strips Complete With Threading Work On Each Side Of Pipe Each Flange Should Be 4 Holes And Cut For Cables. Make:- Jindal/Tata/Djb Approved. , Complete Clamping/Holding The Pump Set And Pipe With Suitable Clamp Along With Nut And Bolts And Washers For Holding The 50 Mm Dia Pipe For Seprate Suction & Delivery Of Both Pumps Including Bending And Shaping Etc.As Required. , S/O Gun Metal Gate Valve Of 50 Mm Dia. Make:Skope/Marck/ Djb Approved. , Providing Of 50 Mm Dia. Ci D/F Non Return Valve Of Size 50Mm Dia., As Per Is 5312, Pn 1.0 Ci Body, Door/Bronze To Rubber Rings/Ss410 Twin Pin. Make: Ivc/Kirloskar/Skope/Djb Approved. , S/O Required Off Size Threaded Nut-Bolts Of Good Quality I.S.I , S/O Ci Sluice Valves Non Rising With Ss Spindle Isi Pn 1.0 Is 14846 Flanged End Of Following Sizes. 50 Mm , 150 Mm , Supply Of Change Over Switch 320 Amp, 4 Pole, 415 Volts, Confirms To Iec: 60974-Iii/Is:13974-Ii Make:- Havells/Abb/ Djb Approved , Supply Of Pvc Insulated Un Armoured Single Core Flexible Copper Cable For Working Volatage Up To 1.1 Kv As Per Is:694/2010 Of Size 35 Sq.Mm2. Make Grandlay/Havells/Gloseter/Djb Approved. , S/O Neoprene Rubber Packing Of Good Quality Having 50% Neoprene Make: Jyoti / Djb Approved. , Making Of Pit For Installation Of Submersible P/Set With The Help Of Pneumatic Hammer/ Mannual Labour, Breaking Of Reinforced Cement Concrete Pit By Power Hammer & Manual Labour Includes, Removing /Cleaning, Filling/Strengthening Of cement concrete Structure Of Pit Installation. I/C With All Civil Work As Required For Installation Of Two Nos Pump Set In Each Pit. , Installation Of Submersible P/Set, In Pit With Suitable Arrangement Of All Electrical Items I/C Panel &Earthing Of All Equipment Like P/Set & Panel Etc., All Piping Work, Fixing Of Valves And Accessories Executing Minor Civil Works, Making Electrical Connections With Cable As Required Size, Taking All Safety Measures All Tool And Tackles Required. , Installation Testing And Commissioning Of All E&M Equipment At No Load And Full Load Conditions As Per Standard With Full Satisfaction Of Engineer-In-Charge. This Is A Turnkey Job And It Further Includes Any Left Out Items Which May Be Required During Execution Of Work Will Be Firm Responsibility & No Extra Payment Will Be Paid.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 4

Delhi View Result →

10.

Defence #11493249 AOC

Contract Date: Ref. Documents Contract Value : ₹ 60.79 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

West Bengal View Result →

11.

Railways #11493041 AOC

Bids Are invited for Procurement Of Tools And Plants Tent , Chair , Table , Torch , Dragon Torch , Rain Suit , Patrolman Stick , Punji , Pick Axe Beater , Walkie Talkie , Clip Applicator , Rail Disc Cutter , Rail Disc Cutter Wheel Stone , Rail Drilling Machine , Rail Drilling Tool , Rail Drilling Tool , Rail Drilling Tool , Chamfering Kit , At Welding Trimmer , Rail Heating Blower For At Weld , Thermit Welding Tool Set , Rail Profile Weld Grinder , Rail Grinding Stone , Straight Edge , Track Jack , Track Jack Mechanical , Rail Dolly , Rail Tong , Prc Sleepers Chain , Joggled Fish Plate , Fish Plate 1 Mtr Long , C Cl , Anti Sabotage Device , Anti Sabotage Device Key , Fish Bolt Spanner , C Cl , Hammer 5Kg , Hammer 3Kg , Digital Toe Load Measuring Device , Rail Tensioner , Hydraulic Sleeper Spacer , Mono Rail Wheel Barrow , Portable Dc Welding Generator , Rail Wear Gauge , Continuous Rail Thermometer , Laser Distance Meter , Electric Jumper Wire , Jim Crow , Rail Thermometer , Pwi Inspection Kit , Versine Measuring Kit , Track Gauge Cum Level , Destressing Roller , Off Track T Er , Off Track T Er Trolley , T Ing Tools , Acd Male , Acd Female , Electric Arc Welding Machine , Banner Flag , Hs Flag Red , Hs Flag Green , Safety Jacket , Safety Helmet , Safety Shoe , Tricolor Torch , Number Plate , Staff For Patrol Man , Key Man Bag , Breathe Analyzer , Keying Hammer , Pway Inspection Trolley , Material Trolley , Dip Lorrey , Measuring Tape 30Mtr , Measuring Tape 15Mtr , Measuring Tape 5Mtr , Steel Sections Cutting Equipment , Plate Screw Tubular Spanner , Wire Basket , Adjustable Spanner , Whistle , Powrah Spade , Rake Ballast , Pan Mortar , Wooden Blocks , Chain Saw , Bush Cutter , Tarpaulin , Grease , Grease Gun , Caution Indicator Boards , Speed Indicator Boards , Termination Boards , Column Posting For Boards , Generator , Destressing Roller , Remote Controlled Gang Hooter , Safety Goggles , Ambient Temprature Thermometer , Small Testing Hammer , Inspection Cum Chipping Hammer , Elcometer , Pocket Steel Tape , Straight Edge 1M , Measuring Tape 30M , Log Line With 20 Kg Mettalic Clinder , Probing Rod , Inside Calliper Outside Calliper , Feeler Gauge , Mirror 10X15 Cm , Bridge Inspection Torch Light , Magnifying Glass 100 Mm , Piano Wire With Cl S , Plumb Bob , Steel Scraper , Binoculars , Current Meter , Echo Sounder , Schmidts Hammer , Dye Penetration Kit , Magnetic Crack Detector , Welding Gauge , Safety Belt , Duro Meter , Auto Level , Hydraulic Torque Wrench , Hexagonal Crowbar , Pan Mortar , Tommy Bar , Fire Buckets With Stand , Emergency Medical Hand Stretcher , First Aid Box - First Aid Box , Ambient Temprature Thermometer , Tool Box , Hammer 500Gm , Gum Boots Total Quantity : 4592

Contract Date: Ref. Documents Contract Value : ₹ 1.65 Crore

Government Departments No of Bidders 3

Maharashtra View Result →

12.

Water Resources and Irrigation #11491318 AOC

Contract Date: Ref. Documents Contract Value : ₹ 23.60 Lakh

Government Departments No of Bidders 1

Telangana View Result →

13.

Health and Family Welfare #11484490 AOC

Tender For Supply, Installation, Testing, And Commissioning Of Computer Network Related Equipments/Items , Supply, Installation, Testing, And Commissioning Of Computer Network Related Equipments/Items (Specifications As Per Tender Document) , Wi-Fi 6 Dual Band Poe Access Point - D-Link /Cisco/Netgear Or Equivalent, Ieee 802.11Ax, Dual Band (2.4 Ghz & 5 Ghz), Minimum Ax1800 Throughput, Poe (802.3Af/At) Compliant , 24-Port Managed Poe Switch - D-Link / Cisco/Netgear Or Equivalent, 24×10/100/1000 Mbps Poe Ports With Minimum 4 Combo Copper/Sfp Ports, Layer-2/Layer-3 Lite, Rack-Mountable , Cat-6 Solid Utp Cable - D-Link/Honeywell Or Equivalent, 4-Pair, 23 Awg, 305 Meters Per Roll, Suitable For Structured Cabling , Cat-6 Utp Patch Cord (Gray) - D-Link Or Equivalent, 1 Meter Length, Factory-Terminated, Molded Boots , Online Ups 1 Kva - Online Double Conversion, With Internal Batteries, Minimum 30 Minutes Backup (At 50% Load), Suitable For Network Equipment , Pvc Conduit Pipe (1 Inch) - Heavy-Duty Pvc Conduit With All Fittings, Including Laying, Fixing, And Labor Charges (Per Running Foot) , 5-Port Poe Switch - D-Link/Cisco/Netgear Or Equivalent, 5×10/100/1000 Mbps Poe Ports, Unmanaged/Managed As Specified, Suitable For Access Point Connectivity , Ups 600 Va - Line-Interactive Ups With Internal Battery, Suitable For Desktop/Network Devices , Network Rack 6U - Wall-Mounted Rack, Lockable Front Glass Door, With Power Strip And Cooling Fan , Laying Of Optical Fiber Cable (Ofc) - 2-Core Single-Mode Ofc, Overhead Laying From Guest House Main Building To House No. 84 & 85 In Medical Campus, Including Clamps, Accessories, And Labor , Gigabit Media Converter - D-Link Or Equivalent, 10/100/1000 Mbps, Single-Mode Fiber Compatible, Complete Set Including Power Adapters

Contract Date: Jul 03, 2026 Contract Value : ₹ 2.32 Lakh

Boards / Undertakings / PSU No of Bidders 4

Punjab View Result →

14.

Coal and Mines #11483592 Technical Bid

Tender for Off-Loading Work To Outside Agency Towards Safe Load Testing And Certification Of 12 Nos. Different Model Hydraulic Cranes & Proof Load Testing Of Hooks Of 17 Nos. Eot Crane In 24/96 Draglines & Different Workshops Of Dudhichua Project Dch/Gm (Excv)/ Tender/All/2026-27/16 Dated: 01.06.2026

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 1

Uttar Pradesh View Result →

15.

Public Administrative Department #11482340 AOC

Tender For Provision Of Lighting Arrangement With Led Street Lights In Ward No -236 Kardampuri Under Shahdara (North) Zone.; 1 LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LEDfixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driverefficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III asper the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall beas approved by Engineer-in-Charge as per requirement. (Thermalmanagemheat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).72 watt 2 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (a)Upto 35 sq. mm 3 P/FHot press sheet mouldedcompound (SMC) fire retardant (Temp. resistance up to 200 C), IP 55 weather proof polebox of innerdimension 200x160x98mm (NS) complete with suitable arrangement for fixing of 2 nosof 6 to 32 amp single pole MCB & 63 Amp. Doublepole isolator (MCB/Isolator excluded) withneutral link duly shorting on DIN Channel with2 Nos of MS clamps with SS back plateofsuitable size with danger monogram property printed on the coveretc asreqd. asreqd. 4 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 1.5 sq. mm 5 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 6 Supply of XLPE insulated PVC Sheathed Al conductor armoured cable 1.1 KV grade conforming to IS-7098 of following size: (a)2x6 Sqmm 7 Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm 8 Supply and fixing of 32mm dia X 1 meter long G.I. Pipe (Medium Class) bracket for mounting of fluorescent/HPMV/HPSV Street Light fitting on pole including bending the pipe to the required shape , 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd 9 Providing and fixing of Stainless steel name plate of size 6×8 sq inch made of 20 gauge sheet including engraved name of area representative duly painted along with SS clamp nut bolt etc as required 10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10KA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a)Single pole

Contract Date: Jun 30, 2026 Contract Value : ₹ 4.10 Lakh

Local Bodies No of Bidders 2

Delhi View Result →

16.

Rural Development #11481883 AOC

Tender For Annual Plan-Kuzhimanna Grama Panchayat Installation Of Mini Mast Lights-So315/26-General Electrical Work - wiring 2 90.15.1.1:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters 3 90.15.4.8:Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 4 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. 5 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). 6 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels 7 90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm 8 OD257774/2025-2026:SupplyandfixingoffollowingsizesofCorrugated PVC flexible conduit alongwithaccessoriesin surface/recess of proposed pole andmakinggoodthesameincaseofrecessed conduit as required 25 mm Corrugated PVC flexible conduit 9 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm 10 OD257790/2025-2026:Supply,installation,testing and commissioning ofDigital time swtch 40A, 2pole , AC1 rated power contactor with 1NO+1NC auxiliary contacts with AC coil and 24 Hours timer for operating automatic ON-OFF function suitable for single phase supply 11 2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 12 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 13 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole 14 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 15 OD257771/2025-2026:Supply and Fixing of 1P+N,40KA,1 module surge protector on existing MCB DB/enclosure/Meter Board etc and giving connection as required. (Schneider A9L40500 or equivalent) 16 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 17 OD257773/2025-2026:5 mm X 3 mm G.I. strip earth lead Supplying and Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate 18 OD257775/2025-2026:Supply and installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-5345-NF ] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required 19 OD257780/2025-2026:Supplying and Fixing DIN rail inside the existing MCB DB/ Panel/Meter board etc 20 OD257777/2025-2026:Supplying and fixing32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board 21 OD257781/2025-2026:Supplying and fixing32A, HRC Fuse with HRC Fuse link with connections, in existing meter board 22 OD257778/2025-2026:Supplying and fixing of following sizes oflight class PVC conduit along with accessories in surface/ recess including cutting the wall/ground and making good the same in case of recessed conduit as required as service pipe 23 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board 24 OD257875/2025-2026:Supply, Providing and fixing Granite of any colour and shade for Name board, of required size laid over base of cement mortar 1:4 (1 Cement : 4 Coarse sand), including all charges etc. complete all, levels, including lettering and fixingetc as required at site. 25 OD257779/2025-2026:Charges for procurement, preparation and submission of application for availing single/three phase KSEB service connection with necessary Sketch, Test and completion report, etc. including necessary liaison work as required

Contract Date: Jul 01, 2026 Contract Value : ₹ 1.14 Lakh

Local Bodies No of Bidders 2

Kerala View Result →

17.

Railways #11479561 AOC

Supply Of Power Transmission Assembly For Electric Point Machine , Power Transmission Assembly For Electric Point Machine 143Mm Stroke To Descripti On No. D.2118-00-18 Of S&T Workshop, Podanur. Firm Shall Have The Full Fledged Testing Facilities Similar To Testing Bay Of Electric Point M/C To Conduct Tests As Per Irs.S.24 & Irs.S.10 On The Following Parameters. (1) Working Load (2)Time Of Operation (3)Stalling Thrust (4) Slip L Oad (5)Stroke Length Of Drive Rod (6) Locking And Detection Parameters. Ultrasonic Testing To Be Conductedon Drive Rod To Ensure The Material Is Free From Internal Cracks/Defects By The Supplier And For Proof Of This, Test Certificate From Reputed Testing Labs Shall Be Enclosed Al Ong With Each Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

Contract Date: Jul 04, 2026 Contract Value : ₹ 1.69 Crore

Government Departments No of Bidders 1

Tamil Nadu View Result →

18.

Drinking Water Supply and Sanitation #11475886 Technical Bid

Tender for E-Quotation For Seeking Firm Rates For Non-Schedule Items For Preparing Estimates. , Supply, Installation, Testing and Commissioning Of New 80 Hp Vt Pump Set , Supplying,Installation,Testing And Commissioning Of Vt Pumpset (Confirming To Is1710:2021 Standards) With 35 Ft Suitable Size Ms Column Pipe Assembly In Random Length Of 5 Ft.(Make-Jyoti/Wpil/Kirloskar) With Ss/Bronze Impeller Capable To Discharge 216 M3/H Against A Total Head Of 68M Coupled With Vertical Solid Shaft Tefc Ie3,Ip55 Type Squirrel Cage Induction Motor (Make-Siemens/Crompton/Abb) Operating On 3 Phase 50 Hz,415V+- 10% Supply And Having Speed 1400-1500 Rpm (Bhp Of Motor Should Be 10% More Than That Of Pumpset Including Cost Pof Supplying,Fitting And Fixing Of All Required Accessories , Repairing Of 80 Hp Vt Pump Set At Raw Water , Supplying All Labour Tools And Tackles For Taking Out The 40Hp Vt Pump Set With Bowl Assembly, Column Pipe And Line Shaft Etc. , Cost Towards Dismantling Of Complete Bowl Assembly. , Cost Towards Repairing And Fitting The Parts Of Vt Pumpset As Per Requirement (Works As Complete Overhauling Of The Pump) Such As:- 1.Machining/Lathe Work 2.Changing Ss Top Shaft,Line Shaft(2 Nos Of 5 Feet) Of And Bottom Shaft 2.Repairing Of Bowl Assembly And Impleller 3.Supplying And Fitting C.L Spider Bearing With Rubber Cut Less Bush-4Nos 4.Supplying And Fitting Of Worn-Out Nut-Bolts,Bolt-Nut Washer,Gland Body Bush Machining,Other Machining Works,Etc As Per Requirement , Complete Assembling The Pump Set And Lowering Including Supplying All Petty Materials. , Cost For Supplying And Installation Of Required Accesories For Repair And Maintenance Of Motor Control Panel Such As:- 150 annual periodical maintenance Contactor-2 No (For 1 No Starter) 160 Amp,Breaking Capacity -36Ka Mccb - 1 No 56-90 A Electronic Overload Relay-2 Nos Timer-2 Nos Volt Meter - 1 Nos annual periodical maintenance Motor - 1 Nos Pilot Lamp - 6 Nos Selector Switch - 4 Nos Single Phase Preventer - 2 Nos [ All Accessories Of Reputed Make] With Complete Internal Wiring With Suitable Size Of Copper Wire And Testing On Load. , Repairing Of 30Hp C/F Pump Sets At Clear Water , Cost For Dismantling Of 30 Hp C/F And Pump Inspection,Changing Of Its Damaged Parts Such As:-Key-01 No, Gland Tightner -1 Set, Gland Tightner Stud-2 Nos, C.I Bearing Housing With Cap -1 Set, Ball Bearing 6306 (Skf)-2 Nos, Grease, Gland Packing,Maching Of The Pump Parts As Per Required Etc All Complete And Testing On Load Etc. , Cost Towards Complete Repairing Of Motor Control Panel Starter 30Hp Cf Pump Set Opening And Changing Of Damaged Parts Such As 1.Mccb - 50 Amp,25Ka,3Pole-2 Nos (For Motor Backup Protection),Mccb -100 Amp,50Ka,3Pole-1 No (Main Mccb) 2.Overload Relay 26-40 Amp-1No 3.Star Delta Timer-1No 4.Digital Volt Meter,Ampere Meter,Three Pahse Indicator Lamp,Push Button On/Off,On/Off/Trip Indicator,Wiring,Etc As Per Required , Repairing Of 15Hp C/F Pump Sets At Clear Water , Cost For Dismantling Of 15Hp C/F And Pump Inspection,Changing Of Its Damaged Parts Such As:-Key-01 No, Gland Tightner -1 Set, Gland Tightner Stud-2 Nos, C.I Bearing Housing With Cap -1 Set, Ball Bearing 6306 (Skf)-2 Nos, Grease, Gland Packing,Maching Of The Pump Parts As Per Required Etc All Complete And Testing On Load Etc. , Cost Towards Complete Repairing Of Motor Control Panel Starter 30Hp Cf Pump Set Opening And Changing Of Damaged Parts Such As 1.Mccb -25 Amp,15Ka,3Pole-2 Nos (For Motor Backup Protection),Mccb -50 Amp,25Ka,3Pole-1 No (Main Mccb) 2.Overload Relay 20-25 Amp-1No 3.Star Delta Timer-1No 4.Digital Volt Meter,Ampere Meter,Three Pahse Indicator Lamp,Push Button On/Off,On/Off/Trip Indicator,Wiring,Etc As Per Required

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Jharkhand View Result →

19.

Agriculture #11475879 Technical Bid

Tender For Motor Rewinding Work- 1 Electric Motor Rewinding Insulation Class- B0.5 Hp, 720, 960, 1440, 2900 Rpm Stator 2 0.75 Hp, 720, 960, 1440, 2900 Rpm Stator 3 1.00 Hp 720, 960, 1440,2900 Rpm Stator 4 2.00 Hp 720, 960, 1440,2900 Rpm Stator 5 3.00 Hp 720, 960, 1440,2900 Rpm Stator 6 5.00 Hp 720, 960, 1440,2900 Rpm Stator 7 7.5 Hp 720, 960, 1440,2900 Rpm Stator 8 10 Hp 720, 960, 1440,2900 Rpm Stator 9 11.5 Hp 720, 960, 1440, 2900 Rpm Stator 10 12.5 Hp 720, 960, 1440, 2900 Rpm Stator 11 15.00 Hp 720, 960, 1440, 2900 Rpm Stator 12 20 Hp To 120 Hp, 720, 960, 1440, 2900 Rpm Stator 13 Rotor 14 Rewinding Of Crane Duty Motor 15 Hp, 960 Rpm, Insulation Class- H Rotor 15 Stator 16 25 Hp, 960 Rpm, Insulation Class- H Rotor 17 Stator 18 Slipring Motor75 Hp, 1440 Rpm, Squral Cage Rotor Of Alluminium Binding Converted Into Copper Strip Binding And Dynamic Balancing With Certificate. 19 120 Hp To 250 Hp, 960,1440 Rpm Strip Binding Rotor 20 Stator 21 250 Hp, 585 Rpm, Strip Binding Rotor 22 Stator 23 265 Hp, 960 Rpm, Strip Binding Rotor 24 Stator 25 400 Hp, 720 Rpm, Strip Binding Rotor 26 Stator 27 Rewinding Of Cane Unloader Motor S-5 Duty 415 Volt15 Hp, 965 Rpm , 900 Starts/Stop Per Hour Rotor 28 Stator 29 25 Hp, 965 Rpm , 900 Starts/Stop Per Hour Rotor 30 Stator 31 Three Speed Motor Insulation Class - Fcentrifugal Motor 110 Kw Ac 1St Speed Upto 200 Rpm 32 2Nd & 3Rd Speed Upto 450 Rpm & 960 Rpm 33 Dc-Motor D-412 Kcp Centrifugal Machine 167 Kv, 1250 Rpm Rotor 34 Stator 35 Repair Of Core Assembly For 3 Speed Motor Of Centrifugal Machine 36 Buffing & Policing Of Rotor Commutator Of Dc Motor For D-412 Centrifugal Machine 37 Welding Machine Spares Rewinding Primary Coil 38 Secondary Coil 39 Choke Coil 40 D.C.Welding Machine Rectifier 230/24 Volt, 600 Amp. 41 Rewinding And Repairing Of Electronic Welding Machine 3 Phase 400 Amp. 42 D.G.Set Spares Rewinding166 Kva Alternator Of Dg Set 1500 Rpm, 50Hz, Pole Of Rotor 4 Nos. Complete Rewinding H Class Enamelled Copper Strip With Material And Labour And Dynamic Balancing With Test Certificate Rotor 43 Stator 44 320 Kva Alternator Of Dg Set 1500 Rpm Rotor 45 Stator 46 166 Kva Alternator Set Excitation System (Booster) 47 320 Kva Alternator Excitor Rotor 48 320 Kva Alternator Excitor Filed Coil 49 Rewinding And Repair Of Submersible Pump Motor 15 Hp 50 25 Hp 51 Complete Rewinding Of 1875 Kva Excitor Rotor (Jyoti Make) Of 1500 Kw Alternator With Satisfactory Testing & Trial On Load. 52 Other Rewinding Workbreak Thruster Mootor 53 Cooler Fan Single Speed / Three Speed 54 Exhaust Fan Single Phase / Three Speed 55 Rewinding Of Celling Fan 56 Brass Holder For Turbine Excitor 57 Copper Carbon Brush For Turbine Excitor 58 Repairing Of D.C. Excitor (Jyoti Make) 15 Kw With Packing & Cutting Of Commutator & Re-Soldering Of Lug Etc. Complete 59 Charges For Supply Of Diode Fixing Plate Alluminium For 1875 Kva Turbine Alternator

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 3

Uttarakhand View Result →

20.

Railways #11471039 AOC

Supply Of supply, erection, testing & commissioning of main hoist dbr, break drum and coupling of 50/6 ton alpha make eot cran , supply, erection, testing & commissioning of main hoist dbr, break drum and coupling of 50/6 ton alpha make eot crane. note: firm has to install the dbr, break drum and coupling in the exist ing control panel by removing existing unit and retrofit and adjust all the parameters as per the load & speed requirements of the consignee. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Contract Date: Jul 03, 2026 Contract Value : ₹ 1.91 Lakh

Government Departments No of Bidders 1

Uttar Pradesh View Result →

21.

Public Administrative Department #11470143 AOC

Supply And Delivery Of Led Spare Material To The Municipal Store Under Mgf In Nalgonda Municipality-1. RAW WATER INLET AND CASCADE AERATOR a) C.I. Sluice valve of 450 mm dia with necessary tailpieces complete. b) Pedestal type flow meter 0 to 12 mld (Integrated, reading and recording type preferably Mahendra&Mahendra) 2. CHEMICAL DOSING EQUIPMENT a) Alum dosing mechanisms b) Alum Dissolving – Mechanism for each of Alum Solutions tanks – 4 Nos. c) Alum Solution feed pipe arrangements complete along with control valve. d) Platform weighing machine of 500 Kg capacity 3. FLASH MIXER CHAMBER: a) Mechanism for instantaneous mixing of Alum solution with raw water. b) Gravity type desludge mechanism up to disposal point 4. CLARIFLOCULATOR: a)Central Mechanism for Driving Bridge over rails motors and fabrication of walkways with hand rails b) Mechanism for flocculation and raking in the flocculation compartment with driving motors c) Mechanism for raking in clarifier compartment d) Central scrapper frame with brushes. e) Sludge discharge device with a minimum size of 250 mm dia CI pipe, sluice valve along with necessary pipe connections etc., for complete with telescopic desludging. 5. FILTRATION PLANT a) Filter media of gravel and sand of suitable characteristics b) Filter under drainage system of suitable capacity c) Wash water and waste water gutters and appurtenances. d) The influent and effluent pipe gallery together with valves, inlet and out let connections including all appurtenances. e) Automatic rate of flow controller for each filter bed. 5. f) Rate flow gauge for each filter bed for inlet and out let. g) Loss of head gauge for each filter bed h) Air blower of suitable capacity along with air pipe system complete for air scour. i) Back wash arrangements complete with water main. j) (i) Wash water pumpsets of suitable capacity (centrifugal) in duplicate with connections suitable capacity and suction delivery connections (ii) Wash water tank pipe connections, control valves and controllers etc., complete. k) Surface wash system comprising of necessary pipe connections, controls etc., complete. l) Bypass arrangements to feed filter beds directly including necessary pipe connections diversion arrangements etc., complete. m) Suitable length of 600 mm dia PSC 6 KSC class clear water main from filtration plant outlet upto inlet of clear water sump with valves specials etc., n) All the jointing material suitable bolts, washers, should be provided with GI materials. 6. Isolated CHLORINATION EQUIPMENT a) Gravity type gaseous chlorinator of capacity 0-3 Kg/Hr. b) Solution feed equipment with pipe line control valves and other fittings etc., complete. c) Spares for Chlorination equipment d) Platform scale type weighing machine of 1000 Kg capacity 7. LABORATORY EQUIPMENT a) Comparator test set for measurement of residual Chlorination using chloro-scope. b) P.H. Test kit with different discs for measurement for PH c) Jar test apparatus for determining optimum alum dosage d) Turbidity meter e) Analytical balance with weights box. f) Fume cup board g) Conductivity meter h) Equipment and reagents required for analysing alum percentage in the ferric alum. i) Test bench fully equipped with glass apparatus for sampling and testing of water before and after treatment j) Equipment and reagents required for analysing chlorine percentage in bleaching powder. k) Necessary furniture: (i) Wooden Stools (ii) Wooden Almarah (Big Size) 8. a) Erection and testing charges of the plant and the equipment supplied under item No. 1 to 7 b) Trail run and maintenance charges for a period of 90 days including all labour charges and chemicals & consumables and water will be supplied free of cost by the department during this period, (The rate of 8.a. and 8.b. be shown separately) Testing of the treated water and comparing with National Standards. 9. SPARES AND WORKING TOOLS: Necessary spares and working tools required for normal working of the plant for a period of 3 years with list of tools proposed to be supplied. NOTE: The inlet and outlet control system of the whole plant should be capable of taking an over load of 25% and Filter losses of 5% for 23.50 working hours per day over the stipulated capacity.

Contract Date: Ref. Documents Contract Value : ₹ 13.37 Lakh

Local Bodies No of Bidders 1

Telangana View Result →

22.

Water Resources and Irrigation #11467167 AOC

Periodical and Emergent electrical maintenance under jurisdiction of Mukutmanipur Electrical and Water supply section etc during the year of 2025-26.- 1 Emergent Electrical maintenance work as & when required basis under the jurisdiction of Mukutmanipur Electrical & Water supply section. 2 a) Electrican 3 b)Helper for Electrician 4 Emergent Electrical maintenance work for the Flooding period in the jurisdiction of Mukutmanipur Electrical & Water supply section i.e. LBHR,RBHR, Kangsabati Bhawan etc. for 123 days as per direction of E.I.C. 5 a) Electrican 6 b) Helper for Electrician 7 Periodical and Emergent electricial maintenance work and pump operation for one year under jurisdiction of Mukutmanipur Electrical and Water supply section i.e.,LBHR, RBHR, Kangsabati Bhawan, Mukutmanipur colony etc. 8 a) Electrican 9 b)Helper for Electrician 10 Opening the Ceiling fan testing, checking and Re-winding by supplying super enamelled copper wire of appropriate gauge, minilex paper, mica sheet, changing the loops, overhauling, backing, varnishing, re-fitting and using and measuring r.p.m. for ceiling fan above 36 sweep up to 60 sweep. 11 Supplying following sizes Capacitor of 250V rating: 2.5 MFD Capacitor (Universal Make or equivalent). 12 Supply Philips LED tube, model no : Mas LEDtube 1200mm 18W865 T8 I - 2100lm. 13 Supply of 2X20 T8 tube holder alongwith2 nos. 20 Watt T8 LED Tubes Specification T8 LED Tube , CCT-6500K, Lumen-2200, Make-Magik/ any, approved make. 14 Supply and fixing of smart bright essential street light complete with all accessories to be fixed / projected from the wall of the building or on pole incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. 72 watt with Toughend glass , 130 lm/w, Spd 15 kva at least and 5 years warrenty etc, Surya/ Crompton make. 15 Supply and fixing of smart bright street light (36 Watt)complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. Make: Crompton/Magik, 36 watt,USOR (M&E) , page-111, Items Sl no -5.3 F.9 16 Supply and fixing of GreenLED Ultima Square (6 x 6) , incl cutting the false ceiling in reqd dimensions also the wiring and connection of the light by 1.5 sq mm cu wire complete. Make: Crompton, 18 watt square/ round , 17 Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Anchor penta) on existingModular GI switch board with top cover plate incl. making necy. connections etc, 18 Supply 16A Modular type Switch(Brand approved by EIC). 19 Supply of ammeter selector switch Current in Each phasewith OFF, 4 Pos. 90° angle of throw (OFF-R-Y-B), 20 Supply of voltmeter selector switch Votage between phaseswith OFF, 4 Pos. 90° angle of throw (OFF-RY-YB-BR), 21 Supply of 22.5 mm Hole Dia Mushroom Type Push Button, 22 Supply of 22.5 mm dia LED indicating lamps (red,yellow, blue), 23 Supply of 240VAC analog time switch for ON-OFF control of street light, L&t/Legrand make. 24 Supply of 3 pole power contactor type ML 2, 40A current rating , L&t/Legrand make. 25 Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. 225mm sweep RPM 9001 1400(9) , EPC/Crompton make. 26 Opening the following Exhaust fan (1 Phase/3 Phase) /Stand Fan/Cabin Fan testing, checking, Re-winding by supplyingsuper enamelled copper wire of appropriate gauge, minalex paper, mica sheet, changing the loops, overhauling, becking, varnishing, re-fitting and testing and measuring r.p.m. etc.Cabin Fan (16 or 40 em, dia sweep), 27 Supply installation testing and commissioning of5.3 H.6 following capacity geyser 5 star rated storage water heater with advanced 3 level safety,For 25L-capacity Venus /any equivalent make. 28 Properly checking of the motor ( upto 75 HP), testing of developed IR value, load current factor, terminal lead joints, terminal bar etc. necessary repairing works. 29 S&F Water proof power supply system IP65, output volatge 12V/24V DC, 50/60Hz frequency, 108 to 305 VAC powersupply, >.95 power factor for LED lamp. (Make: Meanwell), 300 Watt, Model ELG 300. 30 Supply of Alpharex3 D22, 2 channels digital Time swiches,Cat.Nos-4126 41, Legrand make.

Contract Date: Aug 12, 2025 Contract Value : ₹ 14.13 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

23.

Railways #11461641 AOC

Supply Of supply installation testing and commissioning of hydraulic insulator testing jig , supply installation testing and commissioning of hydraulic insulator testing jig with digital displa y or tensile load testing of 25 kv porcelain and composite insulators as per latest specs vide specs no. ti/ spc/ ohe/instest/0091(aug-2024) or latest along with one 20ton capacity digital dynamometer to comply clause no. 6.8 of the specs . [warranty period: 30 months after the date of delivery] [ warranty period: 30 months af ter the date of delivery ] ] , supply installation testing and commissioning of hydraulic insulator testing jig with digital displa y or tensile load testing of 25 kv porcelain and composite insulators as per latest specs vide specs no. ti/ spc/ ohe/instest/0091(aug-2024) or latest along with one 20ton capacity digital dynamometer to comply clause no. 6.8 of the specs . [warranty period: 30 months after the date of delivery] [ warranty period: 30 months af ter the date of delivery ] ] , supply installation testing and commissioning of hydraulic insulator testing jig with digital displa y or tensile load testing of 25 kv porcelain and composite insulators as per latest specs vide specs no. ti/ spc/ ohe/instest/0091(aug-2024) or latest along with one 20ton capacity digital dynamometer to comply clause no. 6.8 of the specs . [warranty period: 30 months after the date of delivery] [ warranty period: 30 months af ter the date of delivery ] ] , supply installation testing and commissioning of hydraulic insulator testing jig with digital displa y or tensile load testing of 25 kv porcelain and composite insulators as per latest specs vide specs no. ti/ spc/ ohe/instest/0091(aug-2024) or latest along with one 20ton capacity digital dynamometer to comply clause no. 6.8 of the specs . [warranty period: 30 months after the date of delivery] [ warranty period: 30 months af ter the date of delivery ] ]

Contract Date: Jul 03, 2026 Contract Value : ₹ 11.18 Lakh

Government Departments No of Bidders 1

Madhya Pradesh View Result →

24.

Water Resources and Irrigation #11460255 AOC

Contract Date: Ref. Documents Contract Value : ₹ 7.55 Lakh

Government Departments No of Bidders 1

Telangana View Result →

25.

Drinking Water Supply and Sanitation #11458554 AOC

Supply,Delivery, Commissioning And Testing Of 3 Phase, 11Kv/0.433 Kv,50Hz, 100Kva Copper Wound, Oil Cooled Out Door Distribution Tranformer, 11Kv, 95Sqmm,3 Phase, 4 Core Aluminium Armoured Ab Power Cable, Cubical Control Panel, 11Kv, 630 Amps, 3 Phase Lbs (Load Break Switch), Armoured Power Cables, Ci Earthing Necessary Accessories For Improvement Of 3 Phase Incoming Voltage Supply To The Inline Booster, Tanker Filling Stations At Hydernagar Campus Under Eamc Sd-Ii&Iii Under O&M Division-Xxi, Control Room, Secunderabad.

Contract Date: Ref. Documents Contract Value : ₹ 22.25 Lakh

Government Departments No of Bidders 1

Telangana View Result →

26.

Railways #11440846 AOC

Supply Of supply and testing with end termination, intermediate termination , supply and testing with end termination, intermediate termination and cord-end termination of over current protection system along with full end termination along with residual current protection ope rated on 415v ac supply with load current 63a, 2 pole conforming to is 12640 (part 2):2008 iec61009-1:19 96 or latest with bimetallic terminal connector suitable for 4.0 dia aluminium tubular busbar for 63a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resil ence, corrosion resistance size: 4.0 sqmm confirming to is: 5561-1970 with maximum temperature rise of 9 0 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking 1 resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16 with ea rth leakage protection of 30 ma, with cord end termination suitable for copper cable of conductor size 1.5 s qmm with cord-end termination, manufactured out of ec grade aluminium extruded extension tubes of min imum purity 99.5% and conductivity not less than 60% iacs, designed and fabricated strictly in accordance with is:5082 specifications, duly conforming in all respects to is:2121 part-i & ii and is:2544 with provision f or sustaining continuous operating temperature up to 120 degree c under specified service conditions. [ w arranty period: 30 months after the date of delivery ] ]

Contract Date: Jul 02, 2026 Contract Value : ₹ 4.82 Lakh

Government Departments No of Bidders 1

Maharashtra View Result →

27.

Drinking Water Supply and Sanitation #11440764 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Tamil Nadu View Result →

28.

Science and Technology #11440503 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 2

Karnataka View Result →

29.

Educational and Research Institute #11433319 AOC

Contract Date: Ref. Documents Contract Value : ₹ 1.12 Crore

Government Departments No of Bidders 1

Telangana View Result →

30.

Health and Family Welfare #11430568 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 7

Rajasthan View Result →

31.

Drinking Water Supply and Sanitation #11425529 AOC

Supply, Delivery, Installation And Testing Of 11Kv / 12Kv 3 Pole 630 Amps Outdoor Lbs ( Load Breaking Switch ) Unit At 11Kv Ctpt Outgoing Area 63 Amps 11Kv Ht Hrc Fuses, Indoor 60 / 90Watts Led Flood Lights, 11Kv 3 Core 95 Sqmm Aluminum Armoured Ug Cable With Necessary Accessories At Prashasan Nagar Pumping Station Under Eamc Sd-Ii&Iii Under O&M Div.No.Xxi, Control Room, Sec-Bad.

Contract Date: Ref. Documents Contract Value : ₹ 4.01 Lakh

Government Departments No of Bidders 1

Telangana View Result →

32.

Drinking Water Supply and Sanitation #11425520 AOC

Supply, Delivery, Installation And Testing Of 11Kv / 12Kv 3 Pole 630 Amps Outdoor Lbs ( Load Breaking Switch ) Unit At 11Kv Ctpt Outgoing Area 63 Amps Ht Hrc Fuses, Indoor 60 / 90Watts Led Flood Lights, 11Kv 3 Core 95 Sqmm Aluminum Ug Cable With Necessary Accessories At Balajinagar Pumping Station Under Eamc Sd-Ii&Iii Under O&M Div.No.Xxi, Control Room, Sec-Bad

Contract Date: Ref. Documents Contract Value : ₹ 4.07 Lakh

Government Departments No of Bidders 1

Telangana View Result →

33.

Information and Broadcasting #11422661 AOC

Contract Date: Ref. Documents Contract Value : ₹ 1.21 Crore

Government Departments No of Bidders 4

Odisha View Result →

34.

Information and Broadcasting #11422659 AOC

Contract Date: Ref. Documents Contract Value : ₹ 1.11 Crore

Government Departments No of Bidders 3

Kerala View Result →

35.

Agriculture #11417843 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Kerala View Result →

36.

Power #11417042 Price Bid

Tender for Complete Rewinding Of 0.5 Kw, 3-ɸ, 415 V, 0.9 annual periodical maintenance Cooling Fan Motors Of 160 Mva Power Transformers. The Work Covers Lowering Of Fan From Radiator Bank, Complete Dismantalling Of All Parts Of Fan Motors, Its Rewinding By Super Enamel Copper Wire Of Same Specification & Gauge, Varnishing Of Complete Motor Body, Replacement Of Damaged Front And Rear Side Bearing With New Ones Of Same Size And Standard Make, Oiling & Greasing Of All Moving Parts, Reassembling Of Motor & Testing For Normal Running Of Cooling Fan With All Cost Of Men, Material, Carriage And T&P Required For The Job. , Complete Rewinding Of 0.24 Kw , 3-ɸ, 415 V, 0.6 annual periodical maintenance Cooling Fan Motors Of 20 Mva Power Transformer. The Work Covers Lowering Of Fan From Radiator Bank, Complete Dismantalling Of All Parts Of Fan Motors, Its Rewinding By Super Enamel Copper Wire Of Same Specification & Guage, Varnishing Of Complete Motor Body, Replacement Of Damaged Front And Rear Side Bearing With New Ones Of Same Size And Standard Make, Oiling & Greasing Of All Moving Parts, Reassembling Of Motor & Testing For Normal Running Of Cooling Fan With All Cost Of Men, Material, Carriage And T&P Required For The Job. , Repairing, Rectification And Rewiring Of Local Marshalling Box Of 160 Mva Power Transformers Cooling Fan Control Circuit, The Work Including Replacement/ Repair Of Damaged Connectors, Mccb , Mcbs, On/Off Selector Switch , Group Selector Switch, Contactors, Push Button, Fuse Base, Terminal Blocks, Thermal Over Load Relay, Starter In The Marshaling Box And All Other Associated Works. (All Consumable Materials Shall Be Provided By Contractor)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Uttar Pradesh View Result →

37.

Housing Urban and Rular Development #11415087 Technical Bid

Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Indian Cables Ltd./ Polycab / repair renovation Cables / Finolex / Havells Cables. 35 Sqmm Size , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , -Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 105 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , -Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Clear Water Pump: Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Clear Water Having Head As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp As Per Is Marked 8400 Lpm X 30.00 M Head (At Mbs) , Ns Item -Design, Construction, Erection And Commissioning Of 1 Ranneywell (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 30 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 1.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Haryana View Result →

38.

Defence #11413644 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 16

Jammu And Kashmir View Result →

39.

Educational and Research Institute #11408306 AOC

Contract Date: Ref. Documents Contract Value : ₹ 42.59 Lakh

Government Departments No of Bidders 5

Delhi View Result →

40.

Drinking Water Supply and Sanitation #11399196 AOC

Supply, Delivery, Installation And Testing Of 11Kv/12Kv 3 Pole 630 Amps Outdoor Lbs (Load Breaking Switch) Unit At Incoming 11Kv Ctpt Outgoing Area, 63 Amps Ht Hrc Fuses At Rear Admin Building Block And Providing Overhaul Servicing Of 3 Pole 415 Volts 1600 Amps, 1250 Amps Acbs For Incoming To The Electrical Control Panel Room With Other Necessary Accessories Under Building And Vehicle Maintenance Sub Division In Ufw Division

Contract Date: Ref. Documents Contract Value : ₹ 4.14 Lakh

Government Departments No of Bidders 1

Telangana View Result →

41.

Drinking Water Supply and Sanitation #11385330 AOC

Supply, Delivery, Installation And Testing Of 11Kv/12Kv 3 Pole 630 Amps Outdoor Lbs (Load Breaking Switch) Unit At Incoming 11Kv Ctpt Outgoing Area, 63 Amps Ht Hrc Fuses At Front Admin. Building Block, Renovation Of Earth Pits At 160 Kva Dg Sets, Incoming 11Kv Ctpt Substation Yard At Rear Block And Other Necessary Accessories Of Front Admin. Building Block Under Building And Vehicle Maintenance Sub Division In Ufw Division.

Contract Date: Ref. Documents Contract Value : ₹ 4.10 Lakh

Government Departments No of Bidders 1

Telangana View Result →

42.

Railways #11381162 AOC

Supply Of Supply, Installation, Testing, And Commissioning Of Passenger Elevatorssupply, Installation, Testing, And Commissioning Of Passenger Elevators,Supply, Installation, Testing, And Commissioning Of Passenger Elevators Cum Stretcher Lifts Su Itable For 15 Persons, Machine: Pm Gearless, Operation: Full Collective Operation, Power Supply: 400/415 Vol Ts (3 Phase Ac), Car Group: One Car (Simplex), Rise (M): 5.20, Stops: 02, Speed (Mps): 1 And As Per Rdso S Pec No.-Rdso/2013/Em/Spec/0016 (Rev1)-2019 Or Is: 17900 Or Latest (Up To The Date Of Tender Opening). Physical Dimensions As Under - (I) Load (A) Persons-15 (B) Kgs-1020 (Ii) Pit Depth : 1350 (Iii) Overhead 45 00 (Iv) Hoistway Demensions (W X D- Mm) : 1750 Mm W X 2750 Mm D (V) Car Dimensions ( W X D X H - Mm ): 1000 Mm W X 2400 Mm X 2200 Mm D (Vi) Car & Hoistway Door Type : Telescopic 2 Speed Door S (Vii) Door Opening (W X H -Mm) : 900 Mm W X 2000 Mm H [ Warranty Period: 30 Months After The Da Te Of Delivery ] ]

Contract Date: Jun 27, 2026 Contract Value : ₹ 13.99 Lakh

Government Departments No of Bidders 1

Uttar Pradesh View Result →

43.

Defence #11370301 AOC

Bids Are Invited For Supply Installation Testing And Commissioning Of 58.5 Kva Under Job No 2561 As Per Store List Att , Cement 43 Grade Opc Packed In Hdpe Bag Each 50 Kg Wt Conforming To Is 8112 1989 , Coarse Sand Free From Vegetation , Coarse Aggregate 20Mm Graded , Coarse Aggregate 40Mm Graded , Hard Core 40 To 63 Mm Graded , Stone For Rr Masonry Less Than 6 Inch , Pre Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick An Colour Having A Tensile Strength , Ms Pipe Med Grade 50Mm Dia Confirming To Is 1611 1998 , Painting Brush 4 Inch , Anti Corrosive Red Oxide Zinc Chromate Primer , Synthetic Paint Enamelled Og , Thinner , Self Driving Screw For Ppgi Sheet , Iron Welding Rod , Mcb Spn 240 Volts 32 Amps , Mcb Sp 6 To 32 Amps , Pvc Tape 19Mm Wide 5M Long , On Load Change Over Switch Within Sheet Steel Enclosure , Cable Pvc Insulated Electric Cables Heavy Duty 1100 Volts Grade Multi Stranded Copper Conductor Of , Cable Xlpe Insulated Screened Pvc Bedded Galvanised Steel Strip Or Wire Armored Electric Power Cable Heavy Duty 1100 Volts Grade , Switch Piano 5 Amp 230 Volts Flush Type One Way , Switch Socket Combination , Led Tube Light Fittings 15W 230V Box Type 4 Feets With Crca Body Pre Coated White And Prewired For Led Tuble Complete , Screw Full Thread 6X19 Mm Isi Marked , Pvc Switch Board Snow White Of Size , Ceiling Rose Three Terminal , Pvc Round Squire Block , Distribution Box 4 Way Double Door Spn 240 Volts Copper Bus Bar And Neutral Link Earthing Stud , Service Cable Pvc Insulated Aluminium Conductor 1100 Volt Grade Heavy Duty Served With Inner Sheathing Of Pvc Tap And Overall Pvc Sheathed , Earthing Plate 600X600X6Mm Galvanised Steel Suitable For Gi Strip Fittings, Drilled With Two Nos Holes For 6 Mm Dia Near One Side , Ci Earthing Pit Cover Of Size 300X300X6Mm With Angle Iron Isa 20X20X3Mm Thick Ms Frame , Funnel Fitted With 20Mm Dia Gi Pipe 1.5M Long , Galvanized Iron Strip 32 X 6 Mm , Charcoal , Salt Normal , Cement 43 Grade Opc Packed In Hdpe Bag Each 50 Kg Wt Total Quantity : 504

Contract Date: Ref. Documents Contract Value : ₹ 10.28 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

Arunachal Pradesh View Result →

44.

Housing Urban and Rular Development #11358912 AOC

Bids Are Invited For 1 Supply And Installation Of Double Door Refrigerator 650 To700 Ltrs With Smart Inverter Compressor And Multi Air Flow. 2 Supply And Installation Of Mixer Grinder 900 1000 Watt With Double Ball Bearing Motor 3 Jars Including 1750Ml Blender 1000Ml Grinder 500Ml Chutney Jar 3 Supply Installation Testing And Commissioning Of Electric Oven 70 75 Ltrs With Long Stainless Steel Handle And 3 Layer Glass Door With Tempered Glass Finish. 4 Supply And Installation Of Front Load Fully Automatic Washing Machine 11 13Kg With Power Steam. 5 Supply And Installation Of Clothes Dryer 5.5 7 Kg With Over Heat Protection Sensor. 6 Supply And Installation Of Led Tv Smart Tv Google Tv 75 Inch Display Resolution 3840 X 2160 7 Wiring For Light Point Fan Point Exhaust Fan Point Call Bell Point With 1.5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface 8 Supply And Fixing Modular Blanking Plate On The Existing Modular Plate And Switch Box Excluding Modular Plate As Required 9 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 3 Pin 5By6 Amps Modular Socket Outlet 10 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 6 Pin 15By16 And 5By6 Amps 11 Wiring For Group Controlled Looped Light Point Fan Point Exhaust Fan Point Call Bell Point Without Independent Switch Etc. With 1.5 Sq. Mm Group B 12 Supplying And Fixing Of Following Sizes Oscillating Type Wall Mounting Fan Suitable For Single Phase 230 Volts 50 Hz Ac 400 Mm Sweep Wall Mountaing Fan 13 Supplying And Fixing Following Way Horizontal Type Three Pole And Neutral Sheet Steel Mcb Distribution Board, 415 V On Surface Recess 6 Way 4 Plus 18Double Door 14 Wiring For Submain Wiring Alongwith Earth Wire With The Following Sizes Of Pvc Insulated Copper Conductor Single Core Cable 2X2.5 Sq. Mm Plus 1X2.5 Sq. Mm Earth Wire. 15 Wiring For Submain Wiring Alongwith Earth Wire With The Following Sizes Of Pvc Insulated Copper Conductor Single Core Cable2 X 4 Sq.Mm. 1 X 4 Sq.Mm. Earth Wire 16 Wiring For Submain Wiring Alongwith Earth Wire With The Following Sizes Of Pvc Insulated Copper Conductor Single Core Cable 2 X 6 Sq.Mm. 1 X 6 Sq.Mm. Earth Wire Total Quantity : 123

Contract Date: Ref. Documents Contract Value : ₹ 5.94 Lakh

Government Departments No of Bidders 4

Jammu and Kashmir View Result →

45.

Defence #11358166 Technical Bid

Tender for Repair And Maintenance Of Eot Cranes And Load Testing Of Eot Cranes And Associated Works At Cvrde Avadi

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Tamil Nadu View Result →

46.

Railways #11358092 AOC

Contract Date: Jun 25, 2026 Contract Value : ₹ 2.15 Lakh

Government Departments No of Bidders 1

Gujarat View Result →

47.

Drinking Water Supply and Sanitation #11348134 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Jharkhand View Result →

48.

Housing Urban and Rular Development #11346479 Technical Bid

Tender for Construction Of Modular Ot Eye Under Old Sadar Hospital At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

49.

Housing Urban and Rular Development #11346477 Technical Bid

Tender for Construction Of Modular Ot (Eye) Under Sub Divisional Hospital At Madhupur Dist Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

50.

Housing Urban and Rular Development #11346476 Technical Bid

Tender for Construction Of Modular Ot (General & Gynae) At Chc Under Sarwan Block At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Multi Purpose Ot Table With C - Arm Compitable , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro-Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

TenderDetail

Loading tenders