View Bid Results For Lease Of Cold Storage Tenders

We found 13 Bid Results related to lease of cold storage tenders. You can find Contractor details who won lease of cold storage tenders along with contract details in Bid awards announcements section.

Indian Tenders
172
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
7
4
2
Tender Publishing Platform
13
State / UT
5
6
3
2
1
1
Contract Value
6
1
3
3
Publish Date
0
0
0
0
0
Sector
2
11
2
Ownership
4
7
4
1
1
Within keyword
Active filters:
Showing 1–1 of 13 tenders matching your filters
1.
Public Administrative Department #10621681 Price Bid
Operation, Maintenance And Management Contract Of Cold Storage For 10 Years Lease At New Sabzi Mandi Campus , Indore
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 8
Madhya Pradesh View Result →
2.
Public Administrative Department #10105777 Price Bid
Contract Of Chhindwara Distt. Chhindwara Cold Storage Of Markfed On As Is Where Is Basis And Modernisation And Operation And Maintanance By Bidder On Lease Basis For 10 Years
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 1
Madhya Pradesh View Result →
3.
Public Administrative Department #9495893 Technical Bid
Tender For Establishment Of Study Centre In Etah Under Cm-Vny Scheme - Civil Work 2 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq m on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in charge. All kinds of soil 3 Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 4 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources:8 graded stone aggregate 40 Mm nominal size derived from natural sources) 6 Treatment of soil under existing floors using chemical emulsion@ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar1:2(1 cement: 2 Coarse sand) to match the existing floor: 7 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 cement:1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 8 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 9 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) 10 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 11 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived From natural sources). 12 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, Bessemers and cantilevers 13 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived From natural sources). 14 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies And access platform 15 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) 16 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources) 17 Providing & applying a coat of residual petroleum bitumen of grade ofVG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 18 Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : 19 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level 20 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of gradeFe-500D or more. (TMT Bars) Fe-500 21 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 22 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) 23 12 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) 24 Cement concrete flooring 1:2:4(1 cement: 2 coarse and:4 graded stone of size 12.5 mm nominal size) laid in one layer finished with floating coat of neat cement (25 mm thick floor) 25 Check red terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete,on20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : 27 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq m including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 28 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry and mixed with pigment of matching shade include in grubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab color of Black, Cherry/Ruby Red or equivalent 29 Providing and fixing factory made uPVC white color sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to Upvc profile), appropriate dimension of uPVC extruded glazing bead sand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame& sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of 30 Providing and fixing12 mm thick frame less toughened glass door shutter of approved brand and manufacture, including providing and fixing top &bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). 31 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer 32 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 33 Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 34 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to115 Mm 35 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase. 36 Supply & filling of cinder in sunken portion of building including braking in to required sizes including supply of all material, T&P required size including of supply of all material , labour, T&P required for proper completion of work. 37 Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a)First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 38 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 39 Construction of drain along with apron (150X150MM) 40 Providing and fixing BRICK CLADDING on façade with adhesive And filing joints with grouting complete 41 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron PorStrap,10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requireda) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm With integral type foot rests 42 b) Same as above but for European type W.C. pan with white plastic seat And lid. Make- Cera, Hindware. 43 Providing and fixing wash basin with C.I.brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require a)White Vitreous China Flat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap 44 Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good theWalls wherever required Kitchen sink with drain board of size 510x1040x200 mm 45 Providing and fixing flexible P.V.C. waste pipe for sink or washbasinIncluding PVC waste fittings complete. Flexible pipe 32 mm dia 46 Providing and fixing flexible P.V.C. waste pipe for sink or washbasinIncluding PVC waste fittings complete. Flexible pipe 40 mm dia 47 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x260x350 mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requireda)One urinal basin with 5 litre white P.V.C. automatic flushing cistern 48 b)Range of two urinal basins with 5 litre white P.V.C. automaticflushing cistern 49 c)Range of three urinal basins with 10 litre white P.V.C. automaticflushing cistern 50 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4(1cement:2 coarse sand: 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade(5X4X0.6X2.1) 51 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleat switch C.P. brass screws and washerscomplete. 52 Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube up to 1 meter long with S.S. triangular plate for Europeantype W.C. ofQuality and make as approved by engineer-in-charge.15 mm nominal bore 53 Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 54 Providing and fixing CP Brass Single lever lelephonic wall mixtureof quality & make and as per the direction of Engineer-in-charge.a)15 mm nominal dia. 55 Providing and Fixing C.P. brass Ablution health faucet assemblywith1.0 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC]-Make-JAQUAR ALD-565 56 Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fact of approved quality conforming to IS:8931. 15 mm nominal bore-ESSCO SQT 526AKN 57 Providing & fixing 60x2cm.C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw. ESSCOAEC-1181 58 Supplying & Fixing of CP soap tray fixed to the wall with PVCRubber plug with CP brass screws-Make-ESSCOAEC-1131 59 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,havingthermalstabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsThisincludesjointingofpipes&fittings with one step CPVC solvent cement, trenching, refilling &testing of joints complete as per direction of Engineer in Chargea)150 mm nominal dia Pipes 60 b)100 mm nominal dia Pipes 61 c)80 mm nominal dia Pipes 62 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embedded in &including cement concrete blocks 10x10x10cm. of1:2:4 mix (1 cement:2 coarse:4 graded stone aggregate 20 mm nominalsize).Including cost of cutting holes & making good the walls etc.a)for 100 mm dia pipe. 63 b)for 75 mm dia pipe. 64 Providing & fixing cast iron trap of self cleansing design with or without vent arm complete, including cost of cutting & making good theWalls & floors.a)100 mm inlet &75 mm outlet. 65 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.(i)Single socket pipes.a)110 mm diameter 66 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1 mx 400 micron, finished with 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement, punning, rounding the edges andMaking and finishing the outlet complete.a) 110 mm 67 Providing and fixing unplasticised-PVC pipe clips of approved design tounplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing increment mortar1:4 (1cement:4 coarse sand) and making good the wall etc. complete.a) 110 mm 68 Providing and fixing to the inlet mouth of rain water pipe cast irongrating15cm diameter and weighing not less than 440 grams. 69 Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete asPer direction of Engineer in Charge.Internal work-Exposed on walla)25mm nominal dia Pipes 70 b)32mm nominal dia Pipes 71 c)40mm nominal dia Pipes 72 d)50mm nominal dia Pipes 73 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etca)15 mm dia nominal bore 74 b)20 mm dia nominal bore 75 Providing and fixing 45cm long unplasticised PVC connection pipeWith brass unions.a) 15 mm nominal bore 76 Providing & fixing CP brass bibcock of approved quality conformingTo IS8931a) 15 mm nominal bore 77 Providing & fixing C.P. brass long body bibcock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15 mm nominal bore 78 Providing &fixing C.P. brass angle valve for basin mixer and gyserPoints of approved quality conforming to IS8931a) 15 mm nominal bore 79 Providing and fixing gun metal gate valve with wheel of approvedquality.a)25 mm dia nominal bore 80 b)32 mm dia nominal bore 81 c)50mmdianominalbore 82 Providingand fixing ball valve (brass) of approved quality, High orLow pressure, with plastic floats completea) 20 mm nominal bore 83 b) 25 mm nominal bore 84 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank.a) Circular Tank 85 SUB HEAD I-WIRING POINTS 86 SUB HEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS 87 SUB HEAD III-DISTIBUTION BOARD 88 SUB HEAD IV-EARTHING 89 SUB HEAD V-MAIN DISTRIBUTION BOARD AND CABLES 90 PART B-NON SCHEDULE ITEMS 91 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work 92 Supply and fixing of fire extinguisher, ABC Type 6.00kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work 93 Supply and fixing of C02 type fire extinguisher4.5 kg. capacity each (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 94 Supply and fixing of C02 type fire extinguisher 6.5 kg. capacity each (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 95 Supply and fixing of fire bucket, round bottom made ofG.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported each on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge. 96 Outdoor Development of Site 97 SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING OF AIR CONDITIONER 2 TON WITH STABILIZERS. BRAND O-GENERAL, DAIKIN, BLUESTAR ETC 98 Supply, Installation, Testing, Commissioning of library management software withIncluding License & Maintenance and Customization charges 99 Provisioning of online cloud Server, with inbuilt operating System, and Storage as mentioned in the document complete all necessary accessories and as per technical specifications, 100 Supply & Installation of Laser Jet MFP Printer with Scanner 101 Supplying, Installation, Testing & Commissioning 5 KVA Online UPS System with minimum 120 minutes Battery Backup on SMF Batteries & suitable arrangements / cabinet for Batteries, complete with all necessary accessories and as per technical specifications 102 Supplying, Installation, Testing & Commissioning of All in 1 Desktop (24 Inch) with Window Licenses complete with all necessary accessories complete all as per technical specification in DPR, Including Anti virus Software 103 Supplying, Installation, Testing & Commissioning 1 KVA UPS System with 7AH in built Battery complete with Operation maintenance all necessary accessories complete all as per technical specification in section 104 Supply, Installation, Testing, Commissioning CCTV Dome & PTZ Cameras including installation & all accessories and as per technical specifications present in DPR 105 Supply, Installation, Testing, Commissioning Server based NVR with HDD Storage 30 days complete all as per technical specifications 106 Supply, Installation, Testing, Commissioning 8 Port POE switch for CCTV Camera (Each Floor) with all accessories and as per technical specifications 107 Supply, laying, of cat6 cable with RJ45 including all accessories and as per technical specifications , including conduit 108 Supply, Installation, Testing, Commissioning of 55, Inch LED TV including all accessories and as per technical specifications Samsung, LG Xiaomi etc 109 Supply, Installation, Testing and commissioning of 10 MBPS Lease line for 1year complete all as per technical specifications 110 Network Resources & Infrastructure 111 Providing and Installation on site Sofa set with tubular steel frame, powdercoatedtorequiredcolour,with100mmthkcushionwith32 density PU foam for seat and back rest with 100mm cushion with 20 density PU foam, moulded polyurethane arm rest, complete in every respect: Bodyline regency of Feather lite or equivalent of Godrej / Bloplast.Three Seater 112 Reception Table 113 Common Chairs as per direction of engineer-in-charge 114 Workstation 900X1500 as per direction of engineer-in-charge 115 Common Chairs as per direction of engineer-in-charge 116 Furniture for library corner (10 Seater Desk with 20 Chairs) 117 150Liters/hour L Water Cooler (Maximum Energy Consumption(Watt) 1550 Watt for 150 ltr/hr cooling cap.) All complete. As per 118 Fully automatic with auto cut off RO Potable Water Purification System (Filtration Capacity in liter/hour 50, Manufacturers Quality System Certifications ISO 9001:2015) All complete. As perDirection of engineer in charge 119 Computer Chairs as per direction of engineer-in-charge 120 Computer table as per direction of engineer-in-charge 121 Library Book Display Rack, metal storage made of a durableMaterial.5 Shelves 122 SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING OF GRID INTERACTIVE ROOF TOP SOLAR PHOTO VOLTAIC POWER GENERATIONSYSTEM INCLUDINGSPACEFRAME
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Uttar Pradesh View Result →
4.
Agriculture #9280737 Technical Bid
Hiring Of Various Cold Storage In Uttar Pradesh On Lease And License Basis For 3 Years
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 3
Uttar Pradesh View Result →
Uttarakhand View Result →
Rajasthan View Result →
7.
Public Administrative Department #7364974 AOC
Tender For Establishment Of Digital Library In Chandaus, Aligarh Under Cm-Vny Scheme - Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq m on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in charge. All kinds of soil 2 Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 3 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources:8 graded stone aggregate 40 Mm nominal size derived from natural sources) 5 Treatment of soil under existing floors using chemical emulsion@ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar1:2(1 cement: 2 Coarse sand) to match the existing floor: 6 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 cement:1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 8 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 10 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived From natural sources). 11 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, Bessemers and cantilevers 12 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived From natural sources). 13 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies And access platform 14 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) 15 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources) 16 Providing & applying a coat of residual petroleum bitumen of grade ofVG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 17 Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : 18 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level 19 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of gradeFe-500D or more. (TMT Bars) Fe-500 20 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 21 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) 22 12 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) 23 Cement concrete flooring 1:2:4(1 cement: 2 coarse and:4 graded stone of size 12.5 mm nominal size) laid in one layer finished with floating coat of neat cement (25 mm thick floor) 24 Check red terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete,on20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 25 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : 26 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq m including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 27 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry and mixed with pigment of matching shade include in grubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab color of Black, Cherry/Ruby Red or equivalent 28 Providing and fixing factory made uPVC white color sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to Upvc profile), appropriate dimension of uPVC extruded glazing bead sand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame& sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of 29 Providing and fixing12 mm thick frame less toughened glass door shutter of approved brand and manufacture, including providing and fixing top &bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). 30 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer 31 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 32 Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 33 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to115 Mm 34 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase. 35 Supply & filling of cinder in sunken portion of building including braking in to required sizes including supply of all material, T&P required size including of supply of all material , labour, T&P required for proper completion of work. 36 Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a)First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 37 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 38 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet,1200 mm Long spaced between main 39 Construction of drain along with apron (150X150MM) 40 Providing and fixing BRICK CLADDING on façade with adhesive And filing joints with grouting complete 41 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron PorStrap,10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requireda) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm With integral type foot rests 42 b) Same as above but for European type W.C. pan with white plastic seat And lid. Make- Cera, Hindware. 43 Providing and fixing wash basin with C.I.brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require a)White Vitreous China Flat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap 44 Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good theWalls wherever required Kitchen sink with drain board of size 510x1040x200 mm 45 Providing and fixing flexible P.V.C. waste pipe for sink or washbasinIncluding PVC waste fittings complete. Flexible pipe 32 mm dia 46 Providing and fixing flexible P.V.C. waste pipe for sink or washbasinIncluding PVC waste fittings complete. Flexible pipe 40 mm dia 47 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x260x350 mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requireda)One urinal basin with 5 litre white P.V.C. automatic flushing cistern 48 b)Range of two urinal basins with 5 litre white P.V.C. automaticflushing cistern 49 c)Range of three urinal basins with 10 litre white P.V.C. automaticflushing cistern 50 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4(1cement:2 coarse sand: 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade(5X4X0.6X2.1) 51 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleat switch C.P. brass screws and washerscomplete. 52 Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube up to 1 meter long with S.S. triangular plate for Europeantype W.C. ofQuality and make as approved by engineer-in-charge.15 mm nominal bore 53 Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 54 Providing and fixing CP Brass Single lever lelephonic wall mixtureof quality & make and as per the direction of Engineer-in-charge.a)15 mm nominal dia. 55 Providing and Fixing C.P. brass Ablution health faucet assemblywith1.0 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC]-Make-JAQUAR ALD-565 56 Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fact of approved quality conforming to IS:8931. 15 mm nominal bore-ESSCO SQT 526AKN 57 Providing & fixing 60x2cm.C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw. ESSCOAEC-1181 58 Supplying & Fixing of CP soap tray fixed to the wall with PVCRubber plug with CP brass screws-Make-ESSCOAEC-1131 59 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,havingthermalstabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsThisincludesjointingofpipes&fittings with one step CPVC solvent cement, trenching, refilling &testing of joints complete as per direction of Engineer in Chargea)150 mm nominal dia Pipes 60 b)100 mm nominal dia Pipes 61 c)80 mm nominal dia Pipes 62 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embedded in &including cement concrete blocks 10x10x10cm. of1:2:4 mix (1 cement:2 coarse:4 graded stone aggregate 20 mm nominalsize).Including cost of cutting holes & making good the walls etc.a)for 100 mm dia pipe. 63 b)for 75 mm dia pipe. 64 Providing & fixing cast iron trap of self cleansing design with or without vent arm complete, including cost of cutting & making good theWalls & floors.a)100 mm inlet &75 mm outlet. 65 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.(i)Single socket pipes.a)110 mm diameter 66 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1mx1 mx 400 micron, finished with 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement, punning, rounding the edges andMaking and finishing the outlet complete.a) 110 mm 67 Providing and fixing unplasticised-PVC pipe clips of approved design tounplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing increment mortar1:4 (1cement:4 coarse sand) and making good the wall etc. complete.a) 110 mm 68 Providing and fixing to the inlet mouth of rain water pipe cast irongrating15cm diameter and weighing not less than 440 grams. 69 Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete asPer direction of Engineer in Charge.Internal work-Exposed on walla)25mm nominal dia Pipes 70 b)32mm nominal dia Pipes 71 c)40mm nominal dia Pipes 72 d)50mm nominal dia Pipes 73 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etca)15 mm dia nominal bore 74 b)20 mm dia nominal bore 75 Providing and fixing 45cm long unplasticised PVC connection pipeWith brass unions.a) 15 mm nominal bore 76 Providing & fixing CP brass bibcock of approved quality conformingTo IS8931a) 15 mm nominal bore 77 Providing & fixing C.P. brass long body bibcock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15 mm nominal bore 78 Providing &fixing C.P. brass angle valve for basin mixer and gyserPoints of approved quality conforming to IS8931a) 15 mm nominal bore 79 Providing and fixing gun metal gate valve with wheel of approvedquality.a)25 mm dia nominal bore 80 b)32 mm dia nominal bore 81 c)50mmdianominalbore 82 Providingand fixing ball valve (brass) of approved quality, High orLow pressure, with plastic floats completea) 20 mm nominal bore 83 b) 25 mm nominal bore 84 SUB HEAD I-WIRING POINTS 85 SUB HEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS 86 SUB HEAD III-DISTIBUTION BOARD 87 SUB HEAD IV-EARTHING 88 SUB HEAD V-MAIN DISTRIBUTION BOARD AND CABLES 89 PART B-NON SCHEDULE ITEMS 90 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work 91 Supply and fixing of fire extinguisher, ABC Type 6.00kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work 92 Supply and fixing of C02 type fire extinguisher4.5 kg. capacity each (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 93 Supply and fixing of C02 type fire extinguisher 6.5 kg. capacity each (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 94 Supply and fixing of fire bucket, round bottom made ofG.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported each on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge. 95 Outdoor Development of Site 96 SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING OF AIR CONDITIONER 2 TON WITH STABILIZERS. BRAND O-GENERAL, DAIKIN, BLUESTAR ETC 97 Supply, Installation, Testing, Commissioning of library management software withIncluding License & Maintenance and Customization charges 98 Supply & Installation of Laser Jet MFP Printer with Scanner 99 Supplying, Installation, Testing & Commissioning 5 KVA Online UPS System with minimum 120 minutes Battery Backup on SMF Batteries & suitable arrangements / cabinet for Batteries, complete with all necessary accessories and as per technical specifications 100 Supplying, Installation, Testing & Commissioning of All in 1 Desktop (24 Inch) with Window Licenses complete with all necessary accessories complete all as per technical specification in DPR, Including Anti virus Software 101 Supply, Installation, Testing, Commissioning CCTV Dome & PTZ Cameras including installation & all accessories and as per technical specifications present in DPR 102 Supply, Installation, Testing, Commissioning Server based NVR with HDD Storage 30 days complete all as per technical specifications 103 Supply, Installation, Testing, Commissioning 8 Port POE switch for CCTV Camera (Each Floor) with all accessories and as per technical specifications 104 Supply, laying, of cat6 cable with RJ45 including all accessories and as per technical specifications , including conduit 105 Supply, Installation, Testing, Commissioning of 43, Inch LED TV including all accessories and as per technical specifications Samsung, LG Xiaomi etc 106 Supply, Installation, Testing and commissioning of 5 MB Lease line for 1year complete all as per technical specifications 107 Network Resources & Infrastructure 108 Providing and Installation on site Sofa set with tubular steel frame, powdercoatedtorequiredcolour,with100mmthkcushionwith32 density PU foam for seat and back rest with 100mm cushion with 20 density PU foam, moulded polyurethane arm rest, complete in every respect: Bodyline regency of Feather lite or equivalent of Godrej / Bloplast.Three Seater 109 Reception Table 110 Common Chairs as per direction of engineer-in-charge 111 Workstation 900X1500 as per direction of engineer-in-charge 112 Common Chairs as per direction of engineer-in-charge 113 Furniture for library corner (10 Seater Desk with 20 Chairs) 114 150Liters/hour L Water Cooler (Maximum Energy Consumption(Watt) 1550 Watt for 150 ltr/hr cooling cap.) All complete. As per 115 Fully automatic with auto cut off RO Potable Water Purification System (Filtration Capacity in liter/hour 50, Manufacturers Quality System Certifications ISO 9001:2015) All complete. As perDirection of engineer in charge 116 Computer Chairs as per direction of engineer-in-charge 117 Computer table as per direction of engineer-in-charge 118 Library Book Display Rack, metal storage made of a durableMaterial.5 Shelves 119 SUPPLYING, INSTALLATION, TESTING AND COMMISSIONING OF GRID INTERACTIVE ROOF TOP SOLAR PHOTO VOLTAIC POWER GENERATIONSYSTEM INCLUDINGSPACEFRAME (CPWD 6.8.1) 58480*0.735*106/107=42581.09 120 Adding 18 % GST
Contract Date: May 19, 2025 Contract Value : ₹ 96.58 Lakh
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
8.
Public Administrative Department #7158216 AOC
Tender For Operation And Maintenance Of Cold Storage And Milk Chilling Plant At Food Park Maneri Distt Mandla Mp On Lease Basis
Contract Date: Mar 27, 2025 Contract Value : ₹ 9.90 Lakh
Boards / Undertakings / PSU No of Bidders 2
Madhya Pradesh View Result →
9.
Public Administrative Department #2295763 AOC
Tender For Procurement Of Articles For Common Facility Centre At Borkhamon, Matmara - 2 60 Fly Shuttle Frame Loom With Jacquard Attachment And With All Other Required Accessories Like Shuttle, Reed, Heald, Temple, Lease Rod, Pirn, Bobbin H.S. Charkha Etc. 3 Hank To Bobine Winding Machine 12 Capacity Bobin 4 2.5 Mts Horizontal Warping Drum With All Required Accessories 5 Catd ( With Computer, Software, Printer, Card Cutting Machine ) 6 Power Generator ( Dg, 5Kv ) With Connection 7 Muga Reeling Machine 8 Muga Re-Reeling Machine 9 Spinning Machine 10 Hot Air Drier 11 Cocoon Preservation Rack 12 Half Secretariat Table With Chair 13 Steel Chair 14 Steel Almirah 15 Open Steel Rack 8X2.5X5 16 Cocoon Preservation Tray 17 Steel Trunk 18 Water Filter 19 Cup Plate 20 Glass Set - 350 Ml 21 Muga Reeling Cocoon 22 Eri Cocoon 23 Sas Pan ( Big ) 24 Sas Pan ( Medium ) 25 Landdle 26 Mug ( Steel ) 2 Ltr. 27 Bucket ( Steel ) 15 Ltr. 28 Soap 29 Soda 30 Stove With Gas Cylinder ( Heavy Duty Burner ) 31 Gas Table 32 Measuring Glass ( 1000Ml Capacity ) 33 Steel Vessel ( 1Ltr ) 34 Steel Vessel ( 3Ltr ) 35 Steel Vessel ( 5Ltr ) 36 Spoon 37 Glass Rod 38 Weight Machine ( 500Grm To 5 Kg ) 39 Mug ( 500Ml ) 40 Mug ( 1000Ml ) 41 Stainer ( Big ) 42 Alum 43 Hadra 44 Haldi 45 Tea Leaf 46 Onion Peel Etc. 47 Mulberry Yarn 48 Cotton Yarn 49 Eri Yarn 50 Muga Yarn 51 Bucket ( Steel ) 52 Chart Paper 53 Graph Paper 54 Tracing Paper 55 Pencil 56 Eraser 57 Water Colour 58 Brush ( 1, 2, 5 No. ) 59 Sharpner 60 Sketch Pen ( Pkt ) 61 Scale ( Steel ) 62 Computer Table 63 Computer : Processor: Amd Ryzen 3 3250U | Speed: 2.6 Ghz ( Base ) - 3.5 Ghz ( Max ) | 2 Cores | 4 Threads | 1Mb L2 / 4Mb L3 Cache Os: Pre-Loaded Windows 11 Home With Lifetime Validity | Pre-Installed: Ms Office Home And Student 2021 Memory And Storage: 8Gb Ddr4-2400 Ram, Upgradable Up To 16Gb | Storage: 1Tb Hdd Graphics: Integrated Amd Radeon Graphics Display: 21.5 Fhd ( 1920X1080 ) | Brightness: 250 Nits | Ips Display Audio: 2 X 3W Stereo Speakers By Harman | Hd Audio 64 Ups: Compact Design Line Interactive Ups With Load Capacity Of 660Watts / 1100Va Five 6A, 2 / 3 Pin Indian Power Socket ( 4 Battery Backed-Up & Surge Protected Plus 1 Surge Only Protected Outlet ) Automatic Voltage Regulator ( Avr ) With Wide Input Voltage Range 145-290V 2X7.2Ah Battery Provides 30 - 90 Min. Back-Up Time As Per The Load Generator Compatible Compatible With Low Power Loads E.G. Wi-Fi Router, Dsl Modem Cold Start Capability / Changeover From Mains To Generator 1 Year Of Warranty Including Battery 65 Printer With Inbuilt Scanner : Laserjet Tank 1020W Printer For Business & Home, Mess-Free 15 Sec Toner Reload, Lowest Cost / Page For B&W Prints, Compact, Dual Band Wi-Fi, Smart Guided Buttons, Print+Copy+Scan From Phone.
Contract Date: Feb 22, 2023 Contract Value : ₹ 24.51 Lakh
Local Bodies No of Bidders 2
Assam View Result →
10.
Public Administrative Department #2293561 AOC
Supply Of Articles For Cocoon Yarn Bank At Kholaguri Under Bihpuria Gp , Articles For Cocoon Yarn Bank At Kholaguri, Bihpuria Gp , 60 Fly Shuttle Frame Loom With Jacquard Attachment And With All Other Required Accessories Like Shuttle, Reed, Heald, Temple, Lease Rod, Pirn, Bobbin H.S. Charkha Etc. , Hank To Bobine Winding Machine 12 Capacity Bobin , 2.5 Mts Horizontal Warping Drum With All Required Accessories , Catd ( With Computer, Software, Printer, Card Cutting Machine ) , Power Generator ( Dg, 5Kv ) With Connection , Muga Reeling Machine , Muga Re-Reeling Machine , Spinning Machine , Hot Air Drier , Cocoon Preservation Rack , Half Secretariat Table With Chair , Steel Chair , Steel Almirah , Open Steel Rack 8X2.5X5 , Cocoon Preservation Tray , Steel Trunk , Water Filter , Cup Plate , Glass Set - 350 Ml , Muga Reeling Cocoon , Eri Cocoon , Sas Pan ( Big ) , Sas Pan ( Medium ) , Landdle , Mug ( Steel ) 2 Ltr. , Bucket ( Steel ) 15 Ltr. , Soap , Soda , Stove With Gas Cylinder ( Heavy Duty Burner ) , Gas Table , Measuring Glass ( 1000Ml Capacity ) , Steel Vessel ( 1Ltr ) , Steel Vessel ( 3Ltr ) , Steel Vessel ( 5Ltr ) , Spoon , Glass Rod , Weight Machine ( 500Grm To 5 Kg ) , Mug ( 500Ml ) , Mug ( 1000Ml ) , Stainer ( Big ) , Alum , Hadra , Haldi , Tea Leaf , Onion Peel Etc. , Mulberry Yarn , Cotton Yarn , Eriyarn , Mugayarn , Bucket ( Steel ) , Chart Paper , Graph Paper , Tracing Paper , Pencil , Eraser , Water Colour , Brush ( 1, 2, 5 No. ) , Sharpner , Sketch Pen ( Pkt ) , Scale ( Steel ) , Computer Table , Computer : Processor: Amd Ryzen 3 3250U | Speed: 2.6 Ghz ( Base ) - 3.5 Ghz ( Max ) | 2 Cores | 4 Threads | 1Mb L2 / 4Mb L3 Cache Os: Pre-Loaded Windows 11 Home With Lifetime Validity | Pre-Installed: Ms Office Home And Student 2021 Memory And Storage: 8Gb Ddr4-2400 Ram, Upgradable Up To 16Gb | Storage: 1Tb Hdd Graphics: Integrated Amd Radeon Graphics Display: 21.5 Fhd ( 1920X1080 ) | Brightness: 250 Nits | Ips Display Audio: 2 X 3W Stereo Speakers By Harman | Hd Audio , Ups: Compact Design Line Interactive Ups With Load Capacity Of 660Watts / 1100Va Five 6A, 2 / 3 Pin Indian Power Socket ( 4 Battery Backed-Up & Surge Protected Plus 1 Surge Only Protected Outlet ) Automatic Voltage Regulator ( Avr ) With Wide Input Voltage Range 145-290V 2X7.2Ah Battery Provides 30 - 90 Min. Back-Up Time As Per The Load Generator Compatible Compatible With Low Power Loads E.G. Wi-Fi Router, Dsl Modem Cold Start Capability / Changeover From Mains To Generator 1 Year Of Warranty Including Battery , Printer With Inbuilt Scanner : Laserjet Tank 1020W Printer For Business & Home, Mess-Free 15 Sec Toner Reload, Lowest Cost / Page For B&W Prints, Compact, Dual Band Wi-Fi, Smart Guided Buttons, Print+Copy+Scan From Phone.
Contract Date: Mar 01, 2023 Contract Value : ₹ 24.51 Lakh
Local Bodies No of Bidders 2
Assam View Result →
Madhya Pradesh View Result →
Madhya Pradesh View Result →
Madhya Pradesh View Result →
TenderDetail
Loading tenders